From 498830a97001a793c12aef3d011c5374a05b4a83 Mon Sep 17 00:00:00 2001 From: Manuel Traut Date: Tue, 12 Jan 2016 12:00:25 +0100 Subject: mv yocto examples into example dir Signed-off-by: Manuel Traut --- Makefile | 8 +- .../yocto-advanced/poky/meta-mini/COPYING.MIT | 17 - distribution/yocto-advanced/poky/meta-mini/README | 4 - .../classes/fsl-dynamic-packagearch.bbclass | 47 - .../poky/meta-mini/classes/image_sdcard.bbclass | 73 - .../poky/meta-mini/classes/image_types_fsl.bbclass | 344 -- .../poky/meta-mini/conf/distro/lxt.conf | 122 - .../yocto-advanced/poky/meta-mini/conf/layer.conf | 12 - .../meta-mini/conf/machine/beaglebone-black.conf | 24 - .../meta-mini/conf/machine/imx6qsabrelite.conf | 37 - .../conf/machine/include/fsl-default-settings.inc | 3 - .../meta-mini/conf/machine/include/imx-base.inc | 30 - .../conf/machine/include/imx6sabreauto-common.inc | 6 - .../conf/machine/include/imx6sabresd-common.inc | 6 - .../poky/meta-mini/conf/machine/include/ti33x.inc | 22 - .../recipes-bsp/mini-image/maxi-mini-image.bb | 3 - .../meta-mini/recipes-bsp/mini-image/mini-image.bb | 3 - .../meta-mini/recipes-bsp/mini-image/tiny-image.bb | 3 - .../recipes-bsp/u-boot/u-boot-script_git.bb | 63 - .../poky/meta-mini/recipes-bsp/u-boot/u-boot.inc | 88 - .../meta-mini/recipes-bsp/u-boot/u-boot_2014.07.bb | 26 - .../eglibc/eglibc-locale_2.19.bbappend | 2 - .../recipes-hello/autohello/autohello_1.0.bb | 9 - .../recipes-hello/autohello/autohello_1.1.bb | 8 - .../autohello/files/autohello-1.0.tar.gz | Bin 91394 -> 0 bytes .../autohello/files/autohello-1.1.tar.gz | Bin 94548 -> 0 bytes .../autohello/files/autohello/.deps/autohello.Po | 1 - .../autohello/files/autohello/AUTHORS | 0 .../autohello/files/autohello/COPYING | 1 - .../autohello/files/autohello/ChangeLog | 0 .../autohello/files/autohello/INSTALL | 1 - .../autohello/files/autohello/Makefile | 736 --- .../autohello/files/autohello/Makefile.am | 2 - .../autohello/files/autohello/Makefile.in | 736 --- .../recipes-hello/autohello/files/autohello/NEWS | 0 .../recipes-hello/autohello/files/autohello/README | 0 .../autohello/files/autohello/aclocal.m4 | 1150 ----- .../autohello/files/autohello/autogen.sh | 2 - .../autohello/files/autohello/autohello-1.0.tar.gz | Bin 94553 -> 0 bytes .../autohello/files/autohello/autohello-1.1.tar.gz | Bin 94548 -> 0 bytes .../autohello/files/autohello/autohello.c | 12 - .../files/autohello/autom4te.cache/output.0 | 4905 -------------------- .../files/autohello/autom4te.cache/output.1 | 4905 -------------------- .../files/autohello/autom4te.cache/requests | 154 - .../files/autohello/autom4te.cache/traces.0 | 932 ---- .../files/autohello/autom4te.cache/traces.1 | 354 -- .../autohello/files/autohello/compile | 1 - .../autohello/files/autohello/config.h | 26 - .../autohello/files/autohello/config.h.in | 25 - .../autohello/files/autohello/config.status | 1173 ----- .../autohello/files/autohello/configure | 4905 -------------------- .../autohello/files/autohello/configure.ac | 21 - .../autohello/files/autohello/configure.scan | 21 - .../autohello/files/autohello/depcomp | 1 - .../autohello/files/autohello/install-sh | 1 - .../autohello/files/autohello/missing | 1 - .../meta-mini/recipes-hello/hello/files/hello.c | 8 - .../poky/meta-mini/recipes-hello/hello/hello.bb | 18 - .../hellocm/files/hellocm-0.1.tar.bz2 | Bin 713 -> 0 bytes .../hellocm/files/hellocm-0.1/CMakeLists.txt | 7 - .../hellocm/files/hellocm-0.1/hello.c | 8 - .../meta-mini/recipes-hello/hellocm/hellocm_0.1.bb | 10 - .../helloqt/files/helloqt-1.0.tar.bz2 | Bin 3340 -> 0 bytes .../helloqt/files/helloqt-1.0/helloqt.pro | 25 - .../helloqt/files/helloqt-1.0/main.cpp | 11 - .../helloqt/files/helloqt-1.0/mainwindow.cpp | 14 - .../helloqt/files/helloqt-1.0/mainwindow.h | 22 - .../helloqt/files/helloqt-1.0/mainwindow.ui | 24 - .../meta-mini/recipes-hello/helloqt/helloqt_1.0.bb | 14 - .../poky/meta-mini/recipes-kernel/COPYING.MIT | 17 - .../poky/meta-mini/recipes-kernel/README | 64 - .../classes/fsl-dynamic-packagearch.bbclass | 47 - .../recipes-kernel/classes/image_types_fsl.bbclass | 319 -- .../meta-mini/recipes-kernel/conf/distro/lxt.conf | 141 - .../poky/meta-mini/recipes-kernel/conf/layer.conf | 10 - .../conf/machine/imx6qsabrelite.conf | 34 - .../conf/machine/include/fsl-default-settings.inc | 3 - .../conf/machine/include/imx-base.inc | 38 - .../conf/machine/include/imx6sabreauto-common.inc | 6 - .../conf/machine/include/imx6sabresd-common.inc | 6 - .../linux-vanilla/files/beaglebone-black/defconfig | 308 -- .../linux-vanilla/files/imx6qsabrelite/defconfig | 3721 --------------- .../linux-vanilla/linux-vanilla_3.16.1.bb | 31 - .../recipes-bsp/mini-image/maxi-mini-image.bb | 3 - .../recipes-bsp/mini-image/mini-image.bb | 2 - .../recipes-bsp/u-boot/u-boot-script_git.bb | 63 - .../eglibc/eglibc-locale_2.19.bbappend | 2 - .../files/beaglebone-black/omap2plus_defconfig | 308 -- .../linux-vanilla/files/imx6qsabrelite/defconfig | 3721 --------------- .../linux-vanilla/linux-vanilla_3.16.1.bb | 29 - examples/yocto/meta-mini/COPYING.MIT | 17 + examples/yocto/meta-mini/README | 4 + .../classes/fsl-dynamic-packagearch.bbclass | 47 + .../yocto/meta-mini/classes/image_sdcard.bbclass | 73 + .../meta-mini/classes/image_types_fsl.bbclass | 344 ++ examples/yocto/meta-mini/conf/distro/lxt.conf | 122 + examples/yocto/meta-mini/conf/layer.conf | 12 + .../meta-mini/conf/machine/beaglebone-black.conf | 24 + .../meta-mini/conf/machine/imx6qsabrelite.conf | 37 + .../conf/machine/include/fsl-default-settings.inc | 3 + .../meta-mini/conf/machine/include/imx-base.inc | 30 + .../conf/machine/include/imx6sabreauto-common.inc | 6 + .../conf/machine/include/imx6sabresd-common.inc | 6 + .../yocto/meta-mini/conf/machine/include/ti33x.inc | 22 + .../recipes-bsp/mini-image/maxi-mini-image.bb | 3 + .../meta-mini/recipes-bsp/mini-image/mini-image.bb | 3 + .../meta-mini/recipes-bsp/mini-image/tiny-image.bb | 3 + .../recipes-bsp/u-boot/u-boot-script_git.bb | 63 + .../yocto/meta-mini/recipes-bsp/u-boot/u-boot.inc | 88 + .../meta-mini/recipes-bsp/u-boot/u-boot_2014.07.bb | 26 + .../eglibc/eglibc-locale_2.19.bbappend | 2 + .../recipes-hello/autohello/autohello_1.0.bb | 9 + .../recipes-hello/autohello/autohello_1.1.bb | 8 + .../autohello/files/autohello-1.0.tar.gz | Bin 0 -> 91394 bytes .../autohello/files/autohello-1.1.tar.gz | Bin 0 -> 94548 bytes .../autohello/files/autohello/.deps/autohello.Po | 1 + .../autohello/files/autohello/AUTHORS | 0 .../autohello/files/autohello/COPYING | 1 + .../autohello/files/autohello/ChangeLog | 0 .../autohello/files/autohello/INSTALL | 1 + .../autohello/files/autohello/Makefile | 736 +++ .../autohello/files/autohello/Makefile.am | 2 + .../autohello/files/autohello/Makefile.in | 736 +++ .../recipes-hello/autohello/files/autohello/NEWS | 0 .../recipes-hello/autohello/files/autohello/README | 0 .../autohello/files/autohello/aclocal.m4 | 1150 +++++ .../autohello/files/autohello/autogen.sh | 2 + .../autohello/files/autohello/autohello-1.0.tar.gz | Bin 0 -> 94553 bytes .../autohello/files/autohello/autohello-1.1.tar.gz | Bin 0 -> 94548 bytes .../autohello/files/autohello/autohello.c | 12 + .../files/autohello/autom4te.cache/output.0 | 4905 ++++++++++++++++++++ .../files/autohello/autom4te.cache/output.1 | 4905 ++++++++++++++++++++ .../files/autohello/autom4te.cache/requests | 154 + .../files/autohello/autom4te.cache/traces.0 | 932 ++++ .../files/autohello/autom4te.cache/traces.1 | 354 ++ .../autohello/files/autohello/compile | 1 + .../autohello/files/autohello/config.h | 26 + .../autohello/files/autohello/config.h.in | 25 + .../autohello/files/autohello/config.status | 1173 +++++ .../autohello/files/autohello/configure | 4905 ++++++++++++++++++++ .../autohello/files/autohello/configure.ac | 21 + .../autohello/files/autohello/configure.scan | 21 + .../autohello/files/autohello/depcomp | 1 + .../autohello/files/autohello/install-sh | 1 + .../autohello/files/autohello/missing | 1 + .../meta-mini/recipes-hello/hello/files/hello.c | 8 + .../yocto/meta-mini/recipes-hello/hello/hello.bb | 18 + .../hellocm/files/hellocm-0.1.tar.bz2 | Bin 0 -> 713 bytes .../hellocm/files/hellocm-0.1/CMakeLists.txt | 7 + .../hellocm/files/hellocm-0.1/hello.c | 8 + .../meta-mini/recipes-hello/hellocm/hellocm_0.1.bb | 10 + .../helloqt/files/helloqt-1.0.tar.bz2 | Bin 0 -> 3340 bytes .../helloqt/files/helloqt-1.0/helloqt.pro | 25 + .../helloqt/files/helloqt-1.0/main.cpp | 11 + .../helloqt/files/helloqt-1.0/mainwindow.cpp | 14 + .../helloqt/files/helloqt-1.0/mainwindow.h | 22 + .../helloqt/files/helloqt-1.0/mainwindow.ui | 24 + .../meta-mini/recipes-hello/helloqt/helloqt_1.0.bb | 14 + .../yocto/meta-mini/recipes-kernel/COPYING.MIT | 17 + examples/yocto/meta-mini/recipes-kernel/README | 64 + .../classes/fsl-dynamic-packagearch.bbclass | 47 + .../recipes-kernel/classes/image_types_fsl.bbclass | 319 ++ .../meta-mini/recipes-kernel/conf/distro/lxt.conf | 141 + .../yocto/meta-mini/recipes-kernel/conf/layer.conf | 10 + .../conf/machine/imx6qsabrelite.conf | 34 + .../conf/machine/include/fsl-default-settings.inc | 3 + .../conf/machine/include/imx-base.inc | 38 + .../conf/machine/include/imx6sabreauto-common.inc | 6 + .../conf/machine/include/imx6sabresd-common.inc | 6 + .../linux-vanilla/files/beaglebone-black/defconfig | 308 ++ .../linux-vanilla/files/imx6qsabrelite/defconfig | 3721 +++++++++++++++ .../linux-vanilla/linux-vanilla_3.16.1.bb | 31 + .../recipes-bsp/mini-image/maxi-mini-image.bb | 3 + .../recipes-bsp/mini-image/mini-image.bb | 2 + .../recipes-bsp/u-boot/u-boot-script_git.bb | 63 + .../eglibc/eglibc-locale_2.19.bbappend | 2 + .../files/beaglebone-black/omap2plus_defconfig | 308 ++ .../linux-vanilla/files/imx6qsabrelite/defconfig | 3721 +++++++++++++++ .../linux-vanilla/linux-vanilla_3.16.1.bb | 29 + 179 files changed, 30059 insertions(+), 30053 deletions(-) delete mode 100644 distribution/yocto-advanced/poky/meta-mini/COPYING.MIT delete mode 100644 distribution/yocto-advanced/poky/meta-mini/README delete mode 100644 distribution/yocto-advanced/poky/meta-mini/classes/fsl-dynamic-packagearch.bbclass delete mode 100644 distribution/yocto-advanced/poky/meta-mini/classes/image_sdcard.bbclass delete mode 100644 distribution/yocto-advanced/poky/meta-mini/classes/image_types_fsl.bbclass delete mode 100644 distribution/yocto-advanced/poky/meta-mini/conf/distro/lxt.conf delete mode 100644 distribution/yocto-advanced/poky/meta-mini/conf/layer.conf delete mode 100644 distribution/yocto-advanced/poky/meta-mini/conf/machine/beaglebone-black.conf delete mode 100644 distribution/yocto-advanced/poky/meta-mini/conf/machine/imx6qsabrelite.conf delete mode 100644 distribution/yocto-advanced/poky/meta-mini/conf/machine/include/fsl-default-settings.inc delete mode 100644 distribution/yocto-advanced/poky/meta-mini/conf/machine/include/imx-base.inc delete mode 100644 distribution/yocto-advanced/poky/meta-mini/conf/machine/include/imx6sabreauto-common.inc delete mode 100644 distribution/yocto-advanced/poky/meta-mini/conf/machine/include/imx6sabresd-common.inc delete mode 100644 distribution/yocto-advanced/poky/meta-mini/conf/machine/include/ti33x.inc delete mode 100644 distribution/yocto-advanced/poky/meta-mini/recipes-bsp/mini-image/maxi-mini-image.bb delete mode 100644 distribution/yocto-advanced/poky/meta-mini/recipes-bsp/mini-image/mini-image.bb delete mode 100644 distribution/yocto-advanced/poky/meta-mini/recipes-bsp/mini-image/tiny-image.bb delete mode 100644 distribution/yocto-advanced/poky/meta-mini/recipes-bsp/u-boot/u-boot-script_git.bb delete mode 100644 distribution/yocto-advanced/poky/meta-mini/recipes-bsp/u-boot/u-boot.inc delete mode 100644 distribution/yocto-advanced/poky/meta-mini/recipes-bsp/u-boot/u-boot_2014.07.bb delete mode 100644 distribution/yocto-advanced/poky/meta-mini/recipes-core/eglibc/eglibc-locale_2.19.bbappend delete mode 100644 distribution/yocto-advanced/poky/meta-mini/recipes-hello/autohello/autohello_1.0.bb delete mode 100644 distribution/yocto-advanced/poky/meta-mini/recipes-hello/autohello/autohello_1.1.bb delete mode 100644 distribution/yocto-advanced/poky/meta-mini/recipes-hello/autohello/files/autohello-1.0.tar.gz delete mode 100644 distribution/yocto-advanced/poky/meta-mini/recipes-hello/autohello/files/autohello-1.1.tar.gz delete mode 100644 distribution/yocto-advanced/poky/meta-mini/recipes-hello/autohello/files/autohello/.deps/autohello.Po delete mode 100644 distribution/yocto-advanced/poky/meta-mini/recipes-hello/autohello/files/autohello/AUTHORS delete mode 120000 distribution/yocto-advanced/poky/meta-mini/recipes-hello/autohello/files/autohello/COPYING delete mode 100644 distribution/yocto-advanced/poky/meta-mini/recipes-hello/autohello/files/autohello/ChangeLog delete mode 120000 distribution/yocto-advanced/poky/meta-mini/recipes-hello/autohello/files/autohello/INSTALL delete mode 100644 distribution/yocto-advanced/poky/meta-mini/recipes-hello/autohello/files/autohello/Makefile delete mode 100644 distribution/yocto-advanced/poky/meta-mini/recipes-hello/autohello/files/autohello/Makefile.am delete mode 100644 distribution/yocto-advanced/poky/meta-mini/recipes-hello/autohello/files/autohello/Makefile.in delete mode 100644 distribution/yocto-advanced/poky/meta-mini/recipes-hello/autohello/files/autohello/NEWS delete mode 100644 distribution/yocto-advanced/poky/meta-mini/recipes-hello/autohello/files/autohello/README delete mode 100644 distribution/yocto-advanced/poky/meta-mini/recipes-hello/autohello/files/autohello/aclocal.m4 delete mode 100755 distribution/yocto-advanced/poky/meta-mini/recipes-hello/autohello/files/autohello/autogen.sh delete mode 100644 distribution/yocto-advanced/poky/meta-mini/recipes-hello/autohello/files/autohello/autohello-1.0.tar.gz delete mode 100644 distribution/yocto-advanced/poky/meta-mini/recipes-hello/autohello/files/autohello/autohello-1.1.tar.gz delete mode 100644 distribution/yocto-advanced/poky/meta-mini/recipes-hello/autohello/files/autohello/autohello.c delete mode 100644 distribution/yocto-advanced/poky/meta-mini/recipes-hello/autohello/files/autohello/autom4te.cache/output.0 delete mode 100644 distribution/yocto-advanced/poky/meta-mini/recipes-hello/autohello/files/autohello/autom4te.cache/output.1 delete mode 100644 distribution/yocto-advanced/poky/meta-mini/recipes-hello/autohello/files/autohello/autom4te.cache/requests delete mode 100644 distribution/yocto-advanced/poky/meta-mini/recipes-hello/autohello/files/autohello/autom4te.cache/traces.0 delete mode 100644 distribution/yocto-advanced/poky/meta-mini/recipes-hello/autohello/files/autohello/autom4te.cache/traces.1 delete mode 120000 distribution/yocto-advanced/poky/meta-mini/recipes-hello/autohello/files/autohello/compile delete mode 100644 distribution/yocto-advanced/poky/meta-mini/recipes-hello/autohello/files/autohello/config.h delete mode 100644 distribution/yocto-advanced/poky/meta-mini/recipes-hello/autohello/files/autohello/config.h.in delete mode 100755 distribution/yocto-advanced/poky/meta-mini/recipes-hello/autohello/files/autohello/config.status delete mode 100755 distribution/yocto-advanced/poky/meta-mini/recipes-hello/autohello/files/autohello/configure delete mode 100644 distribution/yocto-advanced/poky/meta-mini/recipes-hello/autohello/files/autohello/configure.ac delete mode 100644 distribution/yocto-advanced/poky/meta-mini/recipes-hello/autohello/files/autohello/configure.scan delete mode 120000 distribution/yocto-advanced/poky/meta-mini/recipes-hello/autohello/files/autohello/depcomp delete mode 120000 distribution/yocto-advanced/poky/meta-mini/recipes-hello/autohello/files/autohello/install-sh delete mode 120000 distribution/yocto-advanced/poky/meta-mini/recipes-hello/autohello/files/autohello/missing delete mode 100644 distribution/yocto-advanced/poky/meta-mini/recipes-hello/hello/files/hello.c delete mode 100644 distribution/yocto-advanced/poky/meta-mini/recipes-hello/hello/hello.bb delete mode 100644 distribution/yocto-advanced/poky/meta-mini/recipes-hello/hellocm/files/hellocm-0.1.tar.bz2 delete mode 100644 distribution/yocto-advanced/poky/meta-mini/recipes-hello/hellocm/files/hellocm-0.1/CMakeLists.txt delete mode 100644 distribution/yocto-advanced/poky/meta-mini/recipes-hello/hellocm/files/hellocm-0.1/hello.c delete mode 100644 distribution/yocto-advanced/poky/meta-mini/recipes-hello/hellocm/hellocm_0.1.bb delete mode 100644 distribution/yocto-advanced/poky/meta-mini/recipes-hello/helloqt/files/helloqt-1.0.tar.bz2 delete mode 100644 distribution/yocto-advanced/poky/meta-mini/recipes-hello/helloqt/files/helloqt-1.0/helloqt.pro delete mode 100644 distribution/yocto-advanced/poky/meta-mini/recipes-hello/helloqt/files/helloqt-1.0/main.cpp delete mode 100644 distribution/yocto-advanced/poky/meta-mini/recipes-hello/helloqt/files/helloqt-1.0/mainwindow.cpp delete mode 100644 distribution/yocto-advanced/poky/meta-mini/recipes-hello/helloqt/files/helloqt-1.0/mainwindow.h delete mode 100644 distribution/yocto-advanced/poky/meta-mini/recipes-hello/helloqt/files/helloqt-1.0/mainwindow.ui delete mode 100644 distribution/yocto-advanced/poky/meta-mini/recipes-hello/helloqt/helloqt_1.0.bb delete mode 100644 distribution/yocto-advanced/poky/meta-mini/recipes-kernel/COPYING.MIT delete mode 100644 distribution/yocto-advanced/poky/meta-mini/recipes-kernel/README delete mode 100644 distribution/yocto-advanced/poky/meta-mini/recipes-kernel/classes/fsl-dynamic-packagearch.bbclass delete mode 100644 distribution/yocto-advanced/poky/meta-mini/recipes-kernel/classes/image_types_fsl.bbclass delete mode 100644 distribution/yocto-advanced/poky/meta-mini/recipes-kernel/conf/distro/lxt.conf delete mode 100644 distribution/yocto-advanced/poky/meta-mini/recipes-kernel/conf/layer.conf delete mode 100644 distribution/yocto-advanced/poky/meta-mini/recipes-kernel/conf/machine/imx6qsabrelite.conf delete mode 100644 distribution/yocto-advanced/poky/meta-mini/recipes-kernel/conf/machine/include/fsl-default-settings.inc delete mode 100644 distribution/yocto-advanced/poky/meta-mini/recipes-kernel/conf/machine/include/imx-base.inc delete mode 100644 distribution/yocto-advanced/poky/meta-mini/recipes-kernel/conf/machine/include/imx6sabreauto-common.inc delete mode 100644 distribution/yocto-advanced/poky/meta-mini/recipes-kernel/conf/machine/include/imx6sabresd-common.inc delete mode 100644 distribution/yocto-advanced/poky/meta-mini/recipes-kernel/linux-vanilla/files/beaglebone-black/defconfig delete mode 100644 distribution/yocto-advanced/poky/meta-mini/recipes-kernel/linux-vanilla/files/imx6qsabrelite/defconfig delete mode 100644 distribution/yocto-advanced/poky/meta-mini/recipes-kernel/linux-vanilla/linux-vanilla_3.16.1.bb delete mode 100644 distribution/yocto-advanced/poky/meta-mini/recipes-kernel/recipes-bsp/mini-image/maxi-mini-image.bb delete mode 100644 distribution/yocto-advanced/poky/meta-mini/recipes-kernel/recipes-bsp/mini-image/mini-image.bb delete mode 100644 distribution/yocto-advanced/poky/meta-mini/recipes-kernel/recipes-bsp/u-boot/u-boot-script_git.bb delete mode 100644 distribution/yocto-advanced/poky/meta-mini/recipes-kernel/recipes-core/eglibc/eglibc-locale_2.19.bbappend delete mode 100644 distribution/yocto-advanced/poky/meta-mini/recipes-kernel/recipes-kernel/linux-vanilla/files/beaglebone-black/omap2plus_defconfig delete mode 100644 distribution/yocto-advanced/poky/meta-mini/recipes-kernel/recipes-kernel/linux-vanilla/files/imx6qsabrelite/defconfig delete mode 100644 distribution/yocto-advanced/poky/meta-mini/recipes-kernel/recipes-kernel/linux-vanilla/linux-vanilla_3.16.1.bb create mode 100644 examples/yocto/meta-mini/COPYING.MIT create mode 100644 examples/yocto/meta-mini/README create mode 100644 examples/yocto/meta-mini/classes/fsl-dynamic-packagearch.bbclass create mode 100644 examples/yocto/meta-mini/classes/image_sdcard.bbclass create mode 100644 examples/yocto/meta-mini/classes/image_types_fsl.bbclass create mode 100644 examples/yocto/meta-mini/conf/distro/lxt.conf create mode 100644 examples/yocto/meta-mini/conf/layer.conf create mode 100644 examples/yocto/meta-mini/conf/machine/beaglebone-black.conf create mode 100644 examples/yocto/meta-mini/conf/machine/imx6qsabrelite.conf create mode 100644 examples/yocto/meta-mini/conf/machine/include/fsl-default-settings.inc create mode 100644 examples/yocto/meta-mini/conf/machine/include/imx-base.inc create mode 100644 examples/yocto/meta-mini/conf/machine/include/imx6sabreauto-common.inc create mode 100644 examples/yocto/meta-mini/conf/machine/include/imx6sabresd-common.inc create mode 100644 examples/yocto/meta-mini/conf/machine/include/ti33x.inc create mode 100644 examples/yocto/meta-mini/recipes-bsp/mini-image/maxi-mini-image.bb create mode 100644 examples/yocto/meta-mini/recipes-bsp/mini-image/mini-image.bb create mode 100644 examples/yocto/meta-mini/recipes-bsp/mini-image/tiny-image.bb create mode 100644 examples/yocto/meta-mini/recipes-bsp/u-boot/u-boot-script_git.bb create mode 100644 examples/yocto/meta-mini/recipes-bsp/u-boot/u-boot.inc create mode 100644 examples/yocto/meta-mini/recipes-bsp/u-boot/u-boot_2014.07.bb create mode 100644 examples/yocto/meta-mini/recipes-core/eglibc/eglibc-locale_2.19.bbappend create mode 100644 examples/yocto/meta-mini/recipes-hello/autohello/autohello_1.0.bb create mode 100644 examples/yocto/meta-mini/recipes-hello/autohello/autohello_1.1.bb create mode 100644 examples/yocto/meta-mini/recipes-hello/autohello/files/autohello-1.0.tar.gz create mode 100644 examples/yocto/meta-mini/recipes-hello/autohello/files/autohello-1.1.tar.gz create mode 100644 examples/yocto/meta-mini/recipes-hello/autohello/files/autohello/.deps/autohello.Po create mode 100644 examples/yocto/meta-mini/recipes-hello/autohello/files/autohello/AUTHORS create mode 120000 examples/yocto/meta-mini/recipes-hello/autohello/files/autohello/COPYING create mode 100644 examples/yocto/meta-mini/recipes-hello/autohello/files/autohello/ChangeLog create mode 120000 examples/yocto/meta-mini/recipes-hello/autohello/files/autohello/INSTALL create mode 100644 examples/yocto/meta-mini/recipes-hello/autohello/files/autohello/Makefile create mode 100644 examples/yocto/meta-mini/recipes-hello/autohello/files/autohello/Makefile.am create mode 100644 examples/yocto/meta-mini/recipes-hello/autohello/files/autohello/Makefile.in create mode 100644 examples/yocto/meta-mini/recipes-hello/autohello/files/autohello/NEWS create mode 100644 examples/yocto/meta-mini/recipes-hello/autohello/files/autohello/README create mode 100644 examples/yocto/meta-mini/recipes-hello/autohello/files/autohello/aclocal.m4 create mode 100755 examples/yocto/meta-mini/recipes-hello/autohello/files/autohello/autogen.sh create mode 100644 examples/yocto/meta-mini/recipes-hello/autohello/files/autohello/autohello-1.0.tar.gz create mode 100644 examples/yocto/meta-mini/recipes-hello/autohello/files/autohello/autohello-1.1.tar.gz create mode 100644 examples/yocto/meta-mini/recipes-hello/autohello/files/autohello/autohello.c create mode 100644 examples/yocto/meta-mini/recipes-hello/autohello/files/autohello/autom4te.cache/output.0 create mode 100644 examples/yocto/meta-mini/recipes-hello/autohello/files/autohello/autom4te.cache/output.1 create mode 100644 examples/yocto/meta-mini/recipes-hello/autohello/files/autohello/autom4te.cache/requests create mode 100644 examples/yocto/meta-mini/recipes-hello/autohello/files/autohello/autom4te.cache/traces.0 create mode 100644 examples/yocto/meta-mini/recipes-hello/autohello/files/autohello/autom4te.cache/traces.1 create mode 120000 examples/yocto/meta-mini/recipes-hello/autohello/files/autohello/compile create mode 100644 examples/yocto/meta-mini/recipes-hello/autohello/files/autohello/config.h create mode 100644 examples/yocto/meta-mini/recipes-hello/autohello/files/autohello/config.h.in create mode 100755 examples/yocto/meta-mini/recipes-hello/autohello/files/autohello/config.status create mode 100755 examples/yocto/meta-mini/recipes-hello/autohello/files/autohello/configure create mode 100644 examples/yocto/meta-mini/recipes-hello/autohello/files/autohello/configure.ac create mode 100644 examples/yocto/meta-mini/recipes-hello/autohello/files/autohello/configure.scan create mode 120000 examples/yocto/meta-mini/recipes-hello/autohello/files/autohello/depcomp create mode 120000 examples/yocto/meta-mini/recipes-hello/autohello/files/autohello/install-sh create mode 120000 examples/yocto/meta-mini/recipes-hello/autohello/files/autohello/missing create mode 100644 examples/yocto/meta-mini/recipes-hello/hello/files/hello.c create mode 100644 examples/yocto/meta-mini/recipes-hello/hello/hello.bb create mode 100644 examples/yocto/meta-mini/recipes-hello/hellocm/files/hellocm-0.1.tar.bz2 create mode 100644 examples/yocto/meta-mini/recipes-hello/hellocm/files/hellocm-0.1/CMakeLists.txt create mode 100644 examples/yocto/meta-mini/recipes-hello/hellocm/files/hellocm-0.1/hello.c create mode 100644 examples/yocto/meta-mini/recipes-hello/hellocm/hellocm_0.1.bb create mode 100644 examples/yocto/meta-mini/recipes-hello/helloqt/files/helloqt-1.0.tar.bz2 create mode 100644 examples/yocto/meta-mini/recipes-hello/helloqt/files/helloqt-1.0/helloqt.pro create mode 100644 examples/yocto/meta-mini/recipes-hello/helloqt/files/helloqt-1.0/main.cpp create mode 100644 examples/yocto/meta-mini/recipes-hello/helloqt/files/helloqt-1.0/mainwindow.cpp create mode 100644 examples/yocto/meta-mini/recipes-hello/helloqt/files/helloqt-1.0/mainwindow.h create mode 100644 examples/yocto/meta-mini/recipes-hello/helloqt/files/helloqt-1.0/mainwindow.ui create mode 100644 examples/yocto/meta-mini/recipes-hello/helloqt/helloqt_1.0.bb create mode 100644 examples/yocto/meta-mini/recipes-kernel/COPYING.MIT create mode 100644 examples/yocto/meta-mini/recipes-kernel/README create mode 100644 examples/yocto/meta-mini/recipes-kernel/classes/fsl-dynamic-packagearch.bbclass create mode 100644 examples/yocto/meta-mini/recipes-kernel/classes/image_types_fsl.bbclass create mode 100644 examples/yocto/meta-mini/recipes-kernel/conf/distro/lxt.conf create mode 100644 examples/yocto/meta-mini/recipes-kernel/conf/layer.conf create mode 100644 examples/yocto/meta-mini/recipes-kernel/conf/machine/imx6qsabrelite.conf create mode 100644 examples/yocto/meta-mini/recipes-kernel/conf/machine/include/fsl-default-settings.inc create mode 100644 examples/yocto/meta-mini/recipes-kernel/conf/machine/include/imx-base.inc create mode 100644 examples/yocto/meta-mini/recipes-kernel/conf/machine/include/imx6sabreauto-common.inc create mode 100644 examples/yocto/meta-mini/recipes-kernel/conf/machine/include/imx6sabresd-common.inc create mode 100644 examples/yocto/meta-mini/recipes-kernel/linux-vanilla/files/beaglebone-black/defconfig create mode 100644 examples/yocto/meta-mini/recipes-kernel/linux-vanilla/files/imx6qsabrelite/defconfig create mode 100644 examples/yocto/meta-mini/recipes-kernel/linux-vanilla/linux-vanilla_3.16.1.bb create mode 100644 examples/yocto/meta-mini/recipes-kernel/recipes-bsp/mini-image/maxi-mini-image.bb create mode 100644 examples/yocto/meta-mini/recipes-kernel/recipes-bsp/mini-image/mini-image.bb create mode 100644 examples/yocto/meta-mini/recipes-kernel/recipes-bsp/u-boot/u-boot-script_git.bb create mode 100644 examples/yocto/meta-mini/recipes-kernel/recipes-core/eglibc/eglibc-locale_2.19.bbappend create mode 100644 examples/yocto/meta-mini/recipes-kernel/recipes-kernel/linux-vanilla/files/beaglebone-black/omap2plus_defconfig create mode 100644 examples/yocto/meta-mini/recipes-kernel/recipes-kernel/linux-vanilla/files/imx6qsabrelite/defconfig create mode 100644 examples/yocto/meta-mini/recipes-kernel/recipes-kernel/linux-vanilla/linux-vanilla_3.16.1.bb diff --git a/Makefile b/Makefile index 88a716a..4f1ce17 100644 --- a/Makefile +++ b/Makefile @@ -33,7 +33,13 @@ HANDOUT_PREFIX := handout_ PRES_PREFIX := pres_ # Folder that should not include to build paths -EXCLUDE_PATH := grep -v ./kconfig-frontends | grep -v ./.git | grep -v ./kernel-devel/module-basics/vain | grep -v ./kernel-devel/module-basics/vain_pci | grep -v ./kernel-devel/module-basics/vain_plat +EXCLUDE_PATH := \ + grep -v ./kconfig-frontends | \ + grep -v ./.git | \ + grep -v ./kernel-devel/module-basics/vain | \ + grep -v ./kernel-devel/module-basics/vain_pci | \ + grep -v ./kernel-devel/module-basics/vain_plat | \ + grep -v ./examples # Search for all folders with Makfile MAKE_FILES = $(shell find . -mindepth 2 -name Makefile | $(EXCLUDE_PATH)) diff --git a/distribution/yocto-advanced/poky/meta-mini/COPYING.MIT b/distribution/yocto-advanced/poky/meta-mini/COPYING.MIT deleted file mode 100644 index 89de354..0000000 --- a/distribution/yocto-advanced/poky/meta-mini/COPYING.MIT +++ /dev/null @@ -1,17 +0,0 @@ -Permission is hereby granted, free of charge, to any person obtaining a copy -of this software and associated documentation files (the "Software"), to deal -in the Software without restriction, including without limitation the rights -to use, copy, modify, merge, publish, distribute, sublicense, and/or sell -copies of the Software, and to permit persons to whom the Software is -furnished to do so, subject to the following conditions: - -The above copyright notice and this permission notice shall be included in -all copies or substantial portions of the Software. - -THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR -IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, -FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE -AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER -LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, -OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN -THE SOFTWARE. diff --git a/distribution/yocto-advanced/poky/meta-mini/README b/distribution/yocto-advanced/poky/meta-mini/README deleted file mode 100644 index 8014dc2..0000000 --- a/distribution/yocto-advanced/poky/meta-mini/README +++ /dev/null @@ -1,4 +0,0 @@ -this is a mini layer for the sabrelite and beaglebone black board - -use DISTRO='lxt' MACHINE='beaglebone-black | sabrelite' in your local.conf -and 'bitbake mini-image' diff --git a/distribution/yocto-advanced/poky/meta-mini/classes/fsl-dynamic-packagearch.bbclass b/distribution/yocto-advanced/poky/meta-mini/classes/fsl-dynamic-packagearch.bbclass deleted file mode 100644 index 40eae6c..0000000 --- a/distribution/yocto-advanced/poky/meta-mini/classes/fsl-dynamic-packagearch.bbclass +++ /dev/null @@ -1,47 +0,0 @@ -# Automatically set PACKAGE_ARCH for MACHINE_SOCARCH -# -# This allow to easy reuse of binary packages among similar SoCs. The -# usual use for this is to share SoC specific packages among different -# boards. -# -# MACHINE_SOCARCH_FILTER list all packages associated with -# MACHINE_SOCARCH and, when match, will set PACKAGE_ARCH as MACHINE_SOCARCH -# -# MACHINE_ARCH_FILTER list all packages associated with -# MACHINE_ARCH and, when match, will set PACKAGE_ARCH as MACHINE_ARCH -# -# For example, in meta-fsl-arm, this is used to share GPU packages for -# i.MX53 boards (as all them share the AMD GPU) and i.MX6 based boards -# (as all them share Vivante GPU). -# -# To use the class, specify, for example: -# -# MACHINE_SOCARCH_soc = "${TUNE_PKGARCH}-soc" -# -# and the need filters, as: -# -# MACHINE_ARCH_FILTER = "virtual/kernel" -# MACHINE_SOCARCH_FILTER_soc = "virtual/libgles1 ... virtual/libgl" -# -# Copyright 2013 (C) O.S. Systems Software LTDA. - -python __anonymous () { - machine_arch_filter = set((d.getVar("MACHINE_ARCH_FILTER", True) or "").split()) - machine_socarch_filter = set((d.getVar("MACHINE_SOCARCH_FILTER", True) or "").split()) - if machine_socarch_filter or machine_arch_filter: - provides = set((d.getVar("PROVIDES", True) or "").split()) - depends = set((d.getVar("DEPENDS", True) or "").split()) - PN = d.getVar("PN", True) - - package_arch = None - if list(machine_arch_filter & (provides | depends)): - package_arch = d.getVar("MACHINE_ARCH", True) - elif list(machine_socarch_filter & (provides | depends)): - package_arch = d.getVar("MACHINE_SOCARCH", True) - if not package_arch: - bb.parse.SkipPackage("You must set MACHINE_SOCARCH as MACHINE_SOCARCH_FILTER is set for this SoC.") - - if package_arch: - bb.debug(1, "Use '%s' as package archictecture for '%s'" % (package_arch, PN)) - d.setVar("PACKAGE_ARCH", package_arch) -} diff --git a/distribution/yocto-advanced/poky/meta-mini/classes/image_sdcard.bbclass b/distribution/yocto-advanced/poky/meta-mini/classes/image_sdcard.bbclass deleted file mode 100644 index f70c4e5..0000000 --- a/distribution/yocto-advanced/poky/meta-mini/classes/image_sdcard.bbclass +++ /dev/null @@ -1,73 +0,0 @@ -inherit image_types - -IMAGE_BOOTLOADER ?= "u-boot" - -# Handle u-boot suffixes -UBOOT_SUFFIX ?= "bin" -UBOOT_PADDING ?= "0" -UBOOT_SUFFIX_SDCARD ?= "${UBOOT_SUFFIX}" - -# Linux bootstream -IMAGE_DEPENDS_linux.sb = "virtual/kernel:do_deploy" - -# Boot partition volume id -BOOTDD_VOLUME_ID ?= "Boot ${MACHINE}" -# Boot partition size [in KiB] -BOOT_SPACE ?= "8192" -# Set alignment to 4MB [in KiB] -IMAGE_ROOTFS_ALIGNMENT = "4096" - -IMAGE_DEPENDS_sdcard = "parted-native:do_populate_sysroot \ - dosfstools-native:do_populate_sysroot \ - mtools-native:do_populate_sysroot \ - virtual/kernel:do_deploy \ - ${@d.getVar('IMAGE_BOOTLOADER', True) and d.getVar('IMAGE_BOOTLOADER', True) + ':do_deploy' or ''}" - -SDCARD = "${DEPLOY_DIR_IMAGE}/${IMAGE_NAME}.rootfs.sdcard" - -SDCARD_GENERATION_COMMAND_ti33x = "generate_ti_sdcard" - -generate_ti_sdcard () { - parted -s ${SDCARD} mklabel msdos - parted -s ${SDCARD} unit KiB mkpart primary fat32 ${IMAGE_ROOTFS_ALIGNMENT} $(expr ${IMAGE_ROOTFS_ALIGNMENT} \+ ${BOOT_SPACE_ALIGNED}) - parted -s ${SDCARD} unit KiB mkpart primary $(expr ${IMAGE_ROOTFS_ALIGNMENT} \+ ${BOOT_SPACE_ALIGNED}) $(expr ${IMAGE_ROOTFS_ALIGNMENT} \+ ${BOOT_SPACE_ALIGNED} \+ $ROOTFS_SIZE) - parted -s ${SDCARD} set 1 boot on - parted ${SDCARD} print - - BOOT_BLOCKS=$(LC_ALL=C parted -s ${SDCARD} unit b print \ - | awk '/ 1 / { print substr($4, 1, length($4 -1)) / 1024 }') - mkfs.vfat -n "${BOOTDD_VOLUME_ID}" -S 512 -C ${WORKDIR}/boot.img $BOOT_BLOCKS - - # copy files to /boot - mcopy -i ${WORKDIR}/boot.img -s ${DEPLOY_DIR_IMAGE}/MLO-${MACHINE} ::/MLO - mcopy -i ${WORKDIR}/boot.img -s ${DEPLOY_DIR_IMAGE}/u-boot-${MACHINE}.img ::/u-boot.img - mmd -i ${WORKDIR}/boot.img ::/boot - mcopy -i ${WORKDIR}/boot.img -s ${DEPLOY_DIR_IMAGE}/${KERNEL_IMAGETYPE}-${MACHINE}.bin ::/boot/${KERNEL_IMAGETYPE} - mcopy -i ${WORKDIR}/boot.img -s ${DEPLOY_DIR_IMAGE}/${KERNEL_IMAGETYPE}-am335x-boneblack.dtb ::/boot/am335x-boneblack.dtb - mcopy -i ${WORKDIR}/boot.img -s ${DEPLOY_DIR_IMAGE}/uEnv.txt ::/uEnv.txt - - # Burn Partition - dd if=${WORKDIR}/boot.img of=${SDCARD} conv=notrunc seek=1 bs=$(expr ${IMAGE_ROOTFS_ALIGNMENT} \* 1024) && sync && sync - dd if=${SDCARD_ROOTFS} of=${SDCARD} conv=notrunc seek=1 bs=$(expr ${BOOT_SPACE_ALIGNED} \* 1024 + ${IMAGE_ROOTFS_ALIGNMENT} \* 1024) && sync && sync -} - -IMAGE_CMD_sdcard () { - if [ -z "${SDCARD_ROOTFS}" ]; then - bberror "SDCARD_ROOTFS is undefined. To use sdcard image from Freescale's BSP it needs to be defined." - exit 1 - fi - - # Align boot partition and calculate total SD card image size - BOOT_SPACE_ALIGNED=$(expr ${BOOT_SPACE} + ${IMAGE_ROOTFS_ALIGNMENT} - 1) - BOOT_SPACE_ALIGNED=$(expr ${BOOT_SPACE_ALIGNED} - ${BOOT_SPACE_ALIGNED} % ${IMAGE_ROOTFS_ALIGNMENT}) - SDCARD_SIZE=$(expr ${IMAGE_ROOTFS_ALIGNMENT} + ${BOOT_SPACE_ALIGNED} + $ROOTFS_SIZE + ${IMAGE_ROOTFS_ALIGNMENT}) - - # Initialize a sparse file - dd if=/dev/zero of=${SDCARD} bs=1 count=0 seek=$(expr 1024 \* ${SDCARD_SIZE}) - - ${SDCARD_GENERATION_COMMAND} -} - -# The sdcard requires the rootfs filesystem to be built before using -# it so we must make this dependency explicit. -IMAGE_TYPEDEP_sdcard = "${@d.getVar('SDCARD_ROOTFS', 1).split('.')[-1]}" diff --git a/distribution/yocto-advanced/poky/meta-mini/classes/image_types_fsl.bbclass b/distribution/yocto-advanced/poky/meta-mini/classes/image_types_fsl.bbclass deleted file mode 100644 index deb6573..0000000 --- a/distribution/yocto-advanced/poky/meta-mini/classes/image_types_fsl.bbclass +++ /dev/null @@ -1,344 +0,0 @@ -inherit image_types - -IMAGE_BOOTLOADER ?= "u-boot" - -# Handle u-boot suffixes -UBOOT_SUFFIX ?= "bin" -UBOOT_PADDING ?= "0" -UBOOT_SUFFIX_SDCARD ?= "${UBOOT_SUFFIX}" - -# -# Handles i.MX mxs bootstream generation -# -MXSBOOT_NAND_ARGS ?= "" - -# IMX Bootlets Linux bootstream -IMAGE_DEPENDS_linux.sb = "elftosb-native:do_populate_sysroot \ - imx-bootlets:do_deploy \ - virtual/kernel:do_deploy" -IMAGE_LINK_NAME_linux.sb = "" -IMAGE_CMD_linux.sb () { - kernel_bin="`readlink ${DEPLOY_DIR_IMAGE}/${KERNEL_IMAGETYPE}-${MACHINE}.bin`" - kernel_dtb="`readlink ${DEPLOY_DIR_IMAGE}/${KERNEL_IMAGETYPE}-${MACHINE}.dtb || true`" - linux_bd_file=imx-bootlets-linux.bd-${MACHINE} - if [ `basename $kernel_bin .bin` = `basename $kernel_dtb .dtb` ]; then - # When using device tree we build a zImage with the dtb - # appended on the end of the image - linux_bd_file=imx-bootlets-linux.bd-dtb-${MACHINE} - cat $kernel_bin $kernel_dtb \ - > $kernel_bin-dtb - rm -f ${DEPLOY_DIR_IMAGE}/${KERNEL_IMAGETYPE}-${MACHINE}.bin-dtb - ln -s $kernel_bin-dtb ${DEPLOY_DIR_IMAGE}/${KERNEL_IMAGETYPE}-${MACHINE}.bin-dtb - fi - - # Ensure the file is generated - rm -f ${DEPLOY_DIR_IMAGE}/${IMAGE_NAME}.linux.sb - (cd ${DEPLOY_DIR_IMAGE}; elftosb -z -c $linux_bd_file -o ${IMAGE_NAME}.linux.sb) - - # Remove the appended file as it is only used here - rm -f ${DEPLOY_DIR_IMAGE}/$kernel_bin-dtb -} - -# IMX Bootlets barebox bootstream -IMAGE_DEPENDS_barebox.mxsboot-sdcard = "elftosb-native:do_populate_sysroot \ - u-boot-mxsboot-native:do_populate_sysroot \ - imx-bootlets:do_deploy \ - barebox:do_deploy" -IMAGE_CMD_barebox.mxsboot-sdcard () { - barebox_bd_file=imx-bootlets-barebox_ivt.bd-${MACHINE} - - # Ensure the files are generated - (cd ${DEPLOY_DIR_IMAGE}; rm -f ${IMAGE_NAME}.barebox.sb ${IMAGE_NAME}.barebox.mxsboot-sdcard; \ - elftosb -f mx28 -z -c $barebox_bd_file -o ${IMAGE_NAME}.barebox.sb; \ - mxsboot sd ${IMAGE_NAME}.barebox.sb ${IMAGE_NAME}.barebox.mxsboot-sdcard) -} - -# U-Boot mxsboot generation to SD-Card -UBOOT_SUFFIX_SDCARD_mxs ?= "mxsboot-sdcard" -IMAGE_DEPENDS_uboot.mxsboot-sdcard = "u-boot-mxsboot-native:do_populate_sysroot \ - u-boot:do_deploy" -IMAGE_CMD_uboot.mxsboot-sdcard = "mxsboot sd ${DEPLOY_DIR_IMAGE}/u-boot-${MACHINE}.${UBOOT_SUFFIX} \ - ${DEPLOY_DIR_IMAGE}/${IMAGE_NAME}.rootfs.uboot.mxsboot-sdcard" - -IMAGE_DEPENDS_uboot.mxsboot-nand = "u-boot-mxsboot-native:do_populate_sysroot \ - u-boot:do_deploy" -IMAGE_CMD_uboot.mxsboot-nand = "mxsboot ${MXSBOOT_NAND_ARGS} nand \ - ${DEPLOY_DIR_IMAGE}/u-boot-${MACHINE}.${UBOOT_SUFFIX} \ - ${DEPLOY_DIR_IMAGE}/${IMAGE_NAME}.rootfs.uboot.mxsboot-nand" - -# Boot partition volume id -BOOTDD_VOLUME_ID ?= "Boot ${MACHINE}" - -# Boot partition size [in KiB] -BOOT_SPACE ?= "8192" - -# Barebox environment size [in KiB] -BAREBOX_ENV_SPACE ?= "512" - -# Set alignment to 4MB [in KiB] -IMAGE_ROOTFS_ALIGNMENT = "4096" - -IMAGE_DEPENDS_sdcard = "parted-native:do_populate_sysroot \ - dosfstools-native:do_populate_sysroot \ - mtools-native:do_populate_sysroot \ - virtual/kernel:do_deploy \ - ${@d.getVar('IMAGE_BOOTLOADER', True) and d.getVar('IMAGE_BOOTLOADER', True) + ':do_deploy' or ''}" - -SDCARD = "${DEPLOY_DIR_IMAGE}/${IMAGE_NAME}.rootfs.sdcard" - -SDCARD_GENERATION_COMMAND_mxs = "generate_mxs_sdcard" -SDCARD_GENERATION_COMMAND_mx25 = "generate_imx_sdcard" -SDCARD_GENERATION_COMMAND_mx5 = "generate_imx_sdcard" -SDCARD_GENERATION_COMMAND_mx6 = "generate_imx_sdcard" -SDCARD_GENERATION_COMMAND_vf60 = "generate_imx_sdcard" -SDCARD_GENERATION_COMMAND_ti33x = "generate_ti_sdcard" - -generate_ti_sdcard () { - parted -s ${SDCARD} mklabel msdos - parted -s ${SDCARD} unit KiB mkpart primary fat32 ${IMAGE_ROOTFS_ALIGNMENT} $(expr ${IMAGE_ROOTFS_ALIGNMENT} \+ ${BOOT_SPACE_ALIGNED}) - parted -s ${SDCARD} unit KiB mkpart primary $(expr ${IMAGE_ROOTFS_ALIGNMENT} \+ ${BOOT_SPACE_ALIGNED}) $(expr ${IMAGE_ROOTFS_ALIGNMENT} \+ ${BOOT_SPACE_ALIGNED} \+ $ROOTFS_SIZE) - parted -s ${SDCARD} set 1 boot on - parted ${SDCARD} print - - BOOT_BLOCKS=$(LC_ALL=C parted -s ${SDCARD} unit b print \ - | awk '/ 1 / { print substr($4, 1, length($4 -1)) / 1024 }') - mkfs.vfat -n "${BOOTDD_VOLUME_ID}" -S 512 -C ${WORKDIR}/boot.img $BOOT_BLOCKS - - # copy files to /boot - mcopy -i ${WORKDIR}/boot.img -s ${DEPLOY_DIR_IMAGE}/MLO-${MACHINE} ::/MLO - mcopy -i ${WORKDIR}/boot.img -s ${DEPLOY_DIR_IMAGE}/u-boot-${MACHINE}.img ::/u-boot.img - mmd -i ${WORKDIR}/boot.img ::/boot - mcopy -i ${WORKDIR}/boot.img -s ${DEPLOY_DIR_IMAGE}/${KERNEL_IMAGETYPE}-${MACHINE}.bin ::/boot/${KERNEL_IMAGETYPE} - mcopy -i ${WORKDIR}/boot.img -s ${DEPLOY_DIR_IMAGE}/${KERNEL_IMAGETYPE}-am335x-boneblack.dtb ::/boot/am335x-boneblack.dtb - mcopy -i ${WORKDIR}/boot.img -s ${DEPLOY_DIR_IMAGE}/uEnv.txt ::/uEnv.txt - - # Burn Partition - dd if=${WORKDIR}/boot.img of=${SDCARD} conv=notrunc seek=1 bs=$(expr ${IMAGE_ROOTFS_ALIGNMENT} \* 1024) && sync && sync - dd if=${SDCARD_ROOTFS} of=${SDCARD} conv=notrunc seek=1 bs=$(expr ${BOOT_SPACE_ALIGNED} \* 1024 + ${IMAGE_ROOTFS_ALIGNMENT} \* 1024) && sync && sync -} - -# -# Create an image that can by written onto a SD card using dd for use -# with i.MX SoC family -# -# External variables needed: -# ${SDCARD_ROOTFS} - the rootfs image to incorporate -# ${IMAGE_BOOTLOADER} - bootloader to use {u-boot, barebox} -# -# The disk layout used is: -# -# 0 -> IMAGE_ROOTFS_ALIGNMENT - reserved to bootloader (not partitioned) -# IMAGE_ROOTFS_ALIGNMENT -> BOOT_SPACE - kernel and other data -# BOOT_SPACE -> SDIMG_SIZE - rootfs -# -# Default Free space = 1.3x -# Use IMAGE_OVERHEAD_FACTOR to add more space -# <---------> -# 4MiB 8MiB SDIMG_ROOTFS 4MiB -# <-----------------------> <----------> <----------------------> <------------------------------> -# ------------------------ ------------ ------------------------ ------------------------------- -# | IMAGE_ROOTFS_ALIGNMENT | BOOT_SPACE | ROOTFS_SIZE | IMAGE_ROOTFS_ALIGNMENT | -# ------------------------ ------------ ------------------------ ------------------------------- -# ^ ^ ^ ^ ^ -# | | | | | -# 0 4096 4MiB + 8MiB 4MiB + 8Mib + SDIMG_ROOTFS 4MiB + 8MiB + SDIMG_ROOTFS + 4MiB -generate_imx_sdcard () { - # Create partition table - parted -s ${SDCARD} mklabel msdos - parted -s ${SDCARD} unit KiB mkpart primary fat32 ${IMAGE_ROOTFS_ALIGNMENT} $(expr ${IMAGE_ROOTFS_ALIGNMENT} \+ ${BOOT_SPACE_ALIGNED}) - parted -s ${SDCARD} unit KiB mkpart primary $(expr ${IMAGE_ROOTFS_ALIGNMENT} \+ ${BOOT_SPACE_ALIGNED}) $(expr ${IMAGE_ROOTFS_ALIGNMENT} \+ ${BOOT_SPACE_ALIGNED} \+ $ROOTFS_SIZE) - parted ${SDCARD} print - - # Burn bootloader - case "${IMAGE_BOOTLOADER}" in - imx-bootlets) - bberror "The imx-bootlets is not supported for i.MX based machines" - exit 1 - ;; - u-boot) - if [ -n "${SPL_BINARY}" ]; then - dd if=${DEPLOY_DIR_IMAGE}/${SPL_BINARY} of=${SDCARD} conv=notrunc seek=2 bs=512 - dd if=${DEPLOY_DIR_IMAGE}/u-boot-${MACHINE}.${UBOOT_SUFFIX_SDCARD} of=${SDCARD} conv=notrunc seek=42 bs=1K - else - dd if=${DEPLOY_DIR_IMAGE}/u-boot-${MACHINE}.${UBOOT_SUFFIX_SDCARD} of=${SDCARD} conv=notrunc seek=2 skip=${UBOOT_PADDING} bs=512 - fi - ;; - barebox) - dd if=${DEPLOY_DIR_IMAGE}/barebox-${MACHINE}.bin of=${SDCARD} conv=notrunc seek=1 skip=1 bs=512 - dd if=${DEPLOY_DIR_IMAGE}/bareboxenv-${MACHINE}.bin of=${SDCARD} conv=notrunc seek=1 bs=512k - ;; - "") - ;; - *) - bberror "Unkown IMAGE_BOOTLOADER value" - exit 1 - ;; - esac - - # Create boot partition image - BOOT_BLOCKS=$(LC_ALL=C parted -s ${SDCARD} unit b print \ - | awk '/ 1 / { print substr($4, 1, length($4 -1)) / 1024 }') - mkfs.vfat -n "${BOOTDD_VOLUME_ID}" -S 512 -C ${WORKDIR}/boot.img $BOOT_BLOCKS - mcopy -i ${WORKDIR}/boot.img -s ${DEPLOY_DIR_IMAGE}/${KERNEL_IMAGETYPE}-${MACHINE}.bin ::/${KERNEL_IMAGETYPE} - - # Copy boot scripts - for item in ${BOOT_SCRIPTS}; do - src=`echo $item | awk -F':' '{ print $1 }'` - dst=`echo $item | awk -F':' '{ print $2 }'` - - mcopy -i ${WORKDIR}/boot.img -s ${DEPLOY_DIR_IMAGE}/$src ::/$dst - done - - # Copy device tree file - if test -n "${KERNEL_DEVICETREE}"; then - for DTS_FILE in ${KERNEL_DEVICETREE}; do - DTS_BASE_NAME=`basename ${DTS_FILE} | awk -F "." '{print $1}'` - if [ -e "${KERNEL_IMAGETYPE}-${DTS_BASE_NAME}.dtb" ]; then - kernel_bin="`readlink ${KERNEL_IMAGETYPE}-${MACHINE}.bin`" - kernel_bin_for_dtb="`readlink ${KERNEL_IMAGETYPE}-${DTS_BASE_NAME}.dtb | sed "s,$DTS_BASE_NAME,${MACHINE},g;s,\.dtb$,.bin,g"`" - if [ $kernel_bin = $kernel_bin_for_dtb ]; then - mcopy -i ${WORKDIR}/boot.img -s ${DEPLOY_DIR_IMAGE}/${KERNEL_IMAGETYPE}-${DTS_BASE_NAME}.dtb ::/${DTS_BASE_NAME}.dtb - fi - fi - done - fi - - # Burn Partition - dd if=${WORKDIR}/boot.img of=${SDCARD} conv=notrunc seek=1 bs=$(expr ${IMAGE_ROOTFS_ALIGNMENT} \* 1024) && sync && sync - dd if=${SDCARD_ROOTFS} of=${SDCARD} conv=notrunc seek=1 bs=$(expr ${BOOT_SPACE_ALIGNED} \* 1024 + ${IMAGE_ROOTFS_ALIGNMENT} \* 1024) && sync && sync -} - -# -# Create an image that can by written onto a SD card using dd for use -# with i.MXS SoC family -# -# External variables needed: -# ${SDCARD_ROOTFS} - the rootfs image to incorporate -# ${IMAGE_BOOTLOADER} - bootloader to use {imx-bootlets, u-boot} -# -generate_mxs_sdcard () { - # Create partition table - parted -s ${SDCARD} mklabel msdos - - case "${IMAGE_BOOTLOADER}" in - imx-bootlets) - # The disk layout used is: - # - # 0 -> 1024 - Unused (not partitioned) - # 1024 -> BOOT_SPACE - kernel and other data (bootstream) - # BOOT_SPACE -> SDIMG_SIZE - rootfs - # - # Default Free space = 1.3x - # Use IMAGE_OVERHEAD_FACTOR to add more space - # <---------> - # 1024 8MiB SDIMG_ROOTFS 4MiB - # <-------> <----------> <----------------------> <------------------------------> - # --------------------- ------------------------ ------------------------------- - # | Unused | BOOT_SPACE | ROOTFS_SIZE | IMAGE_ROOTFS_ALIGNMENT | - # --------------------- ------------------------ ------------------------------- - # ^ ^ ^ ^ ^ - # | | | | | - # 0 1024 1024 + 8MiB 1024 + 8Mib + SDIMG_ROOTFS 1024 + 8MiB + SDIMG_ROOTFS + 4MiB - parted -s ${SDCARD} unit KiB mkpart primary 1024 $(expr ${IMAGE_ROOTFS_ALIGNMENT} \+ ${BOOT_SPACE_ALIGNED}) - parted -s ${SDCARD} unit KiB mkpart primary $(expr ${IMAGE_ROOTFS_ALIGNMENT} \+ ${BOOT_SPACE_ALIGNED}) $(expr ${IMAGE_ROOTFS_ALIGNMENT} \+ ${BOOT_SPACE_ALIGNED} \+ $ROOTFS_SIZE) - - # Empty 4 bytes from boot partition - dd if=/dev/zero of=${SDCARD} conv=notrunc seek=2048 count=4 - - # Write the bootstream in (2048 + 4) bytes - dd if=${DEPLOY_DIR_IMAGE}/${IMAGE_NAME}.linux.sb of=${SDCARD} conv=notrunc seek=1 seek=2052 - ;; - u-boot) - # The disk layout used is: - # - # 1M - 2M - reserved to bootloader and other data - # 2M - BOOT_SPACE - kernel - # BOOT_SPACE - SDCARD_SIZE - rootfs - # - # The disk layout used is: - # - # 1M -> 2M - reserved to bootloader and other data - # 2M -> BOOT_SPACE - kernel and other data - # BOOT_SPACE -> SDIMG_SIZE - rootfs - # - # Default Free space = 1.3x - # Use IMAGE_OVERHEAD_FACTOR to add more space - # <---------> - # 4MiB 8MiB SDIMG_ROOTFS 4MiB - # <-----------------------> <-------------> <----------------------> <------------------------------> - # ---------------------------------------- ------------------------ ------------------------------- - # | | | |ROOTFS_SIZE | IMAGE_ROOTFS_ALIGNMENT | - # ---------------------------------------- ------------------------ ------------------------------- - # ^ ^ ^ ^ ^ ^ ^ - # | | | | | | | - # 0 1M 2M 4M 4MiB + BOOTSPACE 4MiB + BOOTSPACE + SDIMG_ROOTFS 4MiB + BOOTSPACE + SDIMG_ROOTFS + 4MiB - # - parted -s ${SDCARD} unit KiB mkpart primary 1024 2048 - parted -s ${SDCARD} unit KiB mkpart primary 2048 $(expr ${IMAGE_ROOTFS_ALIGNMENT} \+ ${BOOT_SPACE_ALIGNED}) - parted -s ${SDCARD} unit KiB mkpart primary $(expr ${IMAGE_ROOTFS_ALIGNMENT} \+ ${BOOT_SPACE_ALIGNED}) $(expr ${IMAGE_ROOTFS_ALIGNMENT} \+ ${BOOT_SPACE_ALIGNED} \+ $ROOTFS_SIZE) - - dd if=${DEPLOY_DIR_IMAGE}/${IMAGE_NAME}.rootfs.uboot.mxsboot-sdcard of=${SDCARD} conv=notrunc seek=1 skip=${UBOOT_PADDING} bs=$(expr 1024 \* 1024) - BOOT_BLOCKS=$(LC_ALL=C parted -s ${SDCARD} unit b print \ - | awk '/ 2 / { print substr($4, 1, length($4 -1)) / 1024 }') - - mkfs.vfat -n "${BOOTDD_VOLUME_ID}" -S 512 -C ${WORKDIR}/boot.img $BOOT_BLOCKS - mcopy -i ${WORKDIR}/boot.img -s ${DEPLOY_DIR_IMAGE}/${KERNEL_IMAGETYPE}-${MACHINE}.bin ::/${KERNEL_IMAGETYPE} - if test -n "${KERNEL_DEVICETREE}"; then - for DTS_FILE in ${KERNEL_DEVICETREE}; do - DTS_BASE_NAME=`basename ${DTS_FILE} | awk -F "." '{print $1}'` - if [ -e "${KERNEL_IMAGETYPE}-${DTS_BASE_NAME}.dtb" ]; then - kernel_bin="`readlink ${KERNEL_IMAGETYPE}-${MACHINE}.bin`" - kernel_bin_for_dtb="`readlink ${KERNEL_IMAGETYPE}-${DTS_BASE_NAME}.dtb | sed "s,$DTS_BASE_NAME,${MACHINE},g;s,\.dtb$,.bin,g"`" - if [ $kernel_bin = $kernel_bin_for_dtb ]; then - mcopy -i ${WORKDIR}/boot.img -s ${DEPLOY_DIR_IMAGE}/${KERNEL_IMAGETYPE}-${DTS_BASE_NAME}.dtb ::/${DTS_BASE_NAME}.dtb - fi - fi - done - fi - - dd if=${WORKDIR}/boot.img of=${SDCARD} conv=notrunc seek=2 bs=$(expr 1024 \* 1024) - ;; - barebox) - # BAREBOX_ENV_SPACE is taken on BOOT_SPACE_ALIGNED but it doesn't really matter as long as the rootfs is aligned - parted -s ${SDCARD} unit KiB mkpart primary 1024 $(expr ${IMAGE_ROOTFS_ALIGNMENT} \+ ${BOOT_SPACE_ALIGNED} - ${BAREBOX_ENV_SPACE}) - parted -s ${SDCARD} unit KiB mkpart primary $(expr ${IMAGE_ROOTFS_ALIGNMENT} \+ ${BOOT_SPACE_ALIGNED} - ${BAREBOX_ENV_SPACE}) $(expr ${IMAGE_ROOTFS_ALIGNMENT} \+ ${BOOT_SPACE_ALIGNED}) - parted -s ${SDCARD} unit KiB mkpart primary $(expr ${IMAGE_ROOTFS_ALIGNMENT} \+ ${BOOT_SPACE_ALIGNED}) $(expr ${IMAGE_ROOTFS_ALIGNMENT} \+ ${BOOT_SPACE_ALIGNED} \+ $ROOTFS_SIZE) - - dd if=${DEPLOY_DIR_IMAGE}/${IMAGE_NAME}.barebox.mxsboot-sdcard of=${SDCARD} conv=notrunc seek=1 bs=$(expr 1024 \* 1024) - dd if=${DEPLOY_DIR_IMAGE}/bareboxenv-${MACHINE}.bin of=${SDCARD} conv=notrunc seek=$(expr ${IMAGE_ROOTFS_ALIGNMENT} \+ ${BOOT_SPACE_ALIGNED} - ${BAREBOX_ENV_SPACE}) bs=1024 - ;; - *) - bberror "Unkown IMAGE_BOOTLOADER value" - exit 1 - ;; - esac - - # Change partition type for mxs processor family - bbnote "Setting partition type to 0x53 as required for mxs' SoC family." - echo -n S | dd of=${SDCARD} bs=1 count=1 seek=450 conv=notrunc - - parted ${SDCARD} print - - dd if=${SDCARD_ROOTFS} of=${SDCARD} conv=notrunc seek=1 bs=$(expr ${BOOT_SPACE_ALIGNED} \* 1024 + ${IMAGE_ROOTFS_ALIGNMENT} \* 1024) && sync && sync -} - -IMAGE_CMD_sdcard () { - if [ -z "${SDCARD_ROOTFS}" ]; then - bberror "SDCARD_ROOTFS is undefined. To use sdcard image from Freescale's BSP it needs to be defined." - exit 1 - fi - - # Align boot partition and calculate total SD card image size - BOOT_SPACE_ALIGNED=$(expr ${BOOT_SPACE} + ${IMAGE_ROOTFS_ALIGNMENT} - 1) - BOOT_SPACE_ALIGNED=$(expr ${BOOT_SPACE_ALIGNED} - ${BOOT_SPACE_ALIGNED} % ${IMAGE_ROOTFS_ALIGNMENT}) - SDCARD_SIZE=$(expr ${IMAGE_ROOTFS_ALIGNMENT} + ${BOOT_SPACE_ALIGNED} + $ROOTFS_SIZE + ${IMAGE_ROOTFS_ALIGNMENT}) - - # Initialize a sparse file - dd if=/dev/zero of=${SDCARD} bs=1 count=0 seek=$(expr 1024 \* ${SDCARD_SIZE}) - - ${SDCARD_GENERATION_COMMAND} -} - -# The sdcard requires the rootfs filesystem to be built before using -# it so we must make this dependency explicit. -IMAGE_TYPEDEP_sdcard = "${@d.getVar('SDCARD_ROOTFS', 1).split('.')[-1]}" diff --git a/distribution/yocto-advanced/poky/meta-mini/conf/distro/lxt.conf b/distribution/yocto-advanced/poky/meta-mini/conf/distro/lxt.conf deleted file mode 100644 index 945fdbb..0000000 --- a/distribution/yocto-advanced/poky/meta-mini/conf/distro/lxt.conf +++ /dev/null @@ -1,122 +0,0 @@ -# Distribution definition for: lxt -# -# Copyright (c) 2011, Intel Corporation. -# All rights reserved. -# -# This file is released under the MIT license as described in -# ../meta/COPYING.MIT. -# -# Poky-tiny is intended to define a tiny Linux system comprised of a -# Linux kernel tailored to support each specific MACHINE and busybox. -# Poky-tiny sets some basic policy to ensure a usable system while still -# keeping the rootfs and kernel image as small as possible. -# -# The policies defined are intended to meet the following goals: -# o Serial consoles only (no framebuffer or VGA console) -# o Basic support for IPV4 networking -# o Single user ash shell -# o Static images (no support for adding packages or libraries later) -# o Read-only or RAMFS root filesystem -# o Combined Linux kernel + rootfs in under 4MB -# o Allow the user to select between eglibc or uclibc with the TCLIBC variable -# -# This is currently a partial definition, the following tasks remain: -# [ ] Integrate linux-yocto-tiny ktype into linux-yocto -# [ ] Define linux-yocto-tiny configs for all supported BSPs -# [ ] Drop ldconfig from the installation -# [ ] Modify the runqemu scripts to work with ext2 parameter: -# runqemu qemux86 qemuparams="-nographic" bootparams="console=ttyS0,115200 root=0800" -# [ ] Modify busybox to allow for DISTRO_FEATURES-like confiruration - -require conf/distro/poky.conf -DISTRO = "lxt" - -# FIXME: consider adding a new "tiny" feature -#DISTRO_FEATURES_append = " tiny" - -# We can use packagegroup-core-boot, but in the future we may need a new packagegroup-core-tiny -#POKY_DEFAULT_EXTRA_RDEPENDS += "packagegroup-core-boot" -# Drop kernel-module-af-packet from RRECOMMENDS -POKY_DEFAULT_EXTRA_RRECOMMENDS = "" - -# FIXME: what should we do with this? -TCLIBCAPPEND = "" - -# Disable wide char support for ncurses as we don't include it in -# in the LIBC features below. -ENABLE_WIDEC="false" - -SANITY_TESTED_DISTROS = "Debian-unstable Debian-testing" - -# Drop native language support. This removes the -# eglibc->bash->gettext->libc-posix-clang-wchar dependency. -USE_NLS="no" - -# Reconfigure eglibc for a smaller installation -# Comment out any of the lines below to disable them in the build -#DISTRO_FEATURES_LIBC_TINY = "libc-posix-clang-wchar libc-posix-regexp\ -# libc-posix-regexp-glibc libc-libm libc-crypt libc-spawn" -#DISTRO_FEATURES_LIBC_TINY_append_x86-64 = " libc-libm-big" -# -## Required for "who" -#DISTRO_FEATURES_LIBC_MINIMAL = "libc-utmp libc-getlogin" -#DISTRO_FEATURES_LIBC_REGEX = "libc-posix-regexp" -#DISTRO_FEATURES_LIBC_NET = "libc-inet libc-nis" -# -#DISTRO_FEATURES_LIBC = "${DISTRO_FEATURES_LIBC_TINY} \ -# ${DISTRO_FEATURES_LIBC_MINIMAL} \ -# ${DISTRO_FEATURES_LIBC_REGEX} \ -# ${DISTRO_FEATURES_LIBC_NET} \ -# " - -# Enable LFS - see bug YOCTO #5865 -DISTRO_FEATURES_append_libc-uclibc = " largefile" - -# Use tmpdevfs and the busybox runtime services -VIRTUAL-RUNTIME_dev_manager = "" -VIRTUAL-RUNTIME_login_manager = "" -VIRTUAL-RUNTIME_init_manager = "tiny-init" -VIRTUAL-RUNTIME_keymaps = "" - -# FIXME: Consider adding "modules" to MACHINE_FEATURES and using that in -# packagegroup-core-base to select modutils-initscripts or not. Similar with "net" and -# netbase. - -# By default we only support ext2 and initramfs. We don't build live as that -# pulls in a lot of dependencies for the live image and the installer, like -# udev, grub, etc. These pull in gettext, which fails to build with wide -# character support. -IMAGE_FSTYPES = "sdcard ext3 tar.gz" - -# Drop v86d from qemu dependency list (we support serial) -# Drop grub from meta-intel BSPs -# FIXME: A different mechanism is needed here. We could define -tiny -# variants of all compatible machines, but that leads to a lot -# more machine configs to maintain long term. -MACHINE_ESSENTIAL_EXTRA_RDEPENDS = "" - -# The mtrace script included by eglibc is a perl script. This means the system -# will build perl in case this package is installed. Since we don't care about -# this script for the purposes of tiny, remove the dependency from here. -RDEPENDS_${PN}-mtrace_pn-eglibc = "" - -INHERIT += "blacklist" -PNBLACKLIST[build-appliance-image] = "not buildable with lxt" -PNBLACKLIST[core-image-base] = "not buildable with lxt" -PNBLACKLIST[core-image-clutter] = "not buildable with lxt" -PNBLACKLIST[core-image-directfb] = "not buildable with lxt" -PNBLACKLIST[core-image-full-cmdline] = "not buildable with lxt" -PNBLACKLIST[core-image-lsb] = "not buildable with lxt" -PNBLACKLIST[core-image-lsb-dev] = "not buildable with lxt" -PNBLACKLIST[core-image-lsb-sdk] = "not buildable with lxt" -PNBLACKLIST[core-image-rt] = "not buildable with lxt" -PNBLACKLIST[core-image-rt-sdk] = "not buildable with lxt" -PNBLACKLIST[core-image-sato] = "not buildable with lxt" -PNBLACKLIST[core-image-sato-dev] = "not buildable with lxt" -PNBLACKLIST[core-image-sato-sdk] = "not buildable with lxt" -PNBLACKLIST[core-image-x11] = "not buildable with lxt" -PNBLACKLIST[qt4e-demo-image] = "not buildable with lxt" -PNBLACKLIST[core-image-weston] = "not buildable with lxt" - -# Disable python usage in opkg-utils since it won't build with tiny config -PACKAGECONFIG_pn-opkg-utils = "" diff --git a/distribution/yocto-advanced/poky/meta-mini/conf/layer.conf b/distribution/yocto-advanced/poky/meta-mini/conf/layer.conf deleted file mode 100644 index 35caf4b..0000000 --- a/distribution/yocto-advanced/poky/meta-mini/conf/layer.conf +++ /dev/null @@ -1,12 +0,0 @@ -# We have a conf and classes directory, add to BBPATH -BBPATH .= ":${LAYERDIR}" - -# We have recipes-* directories, add to BBFILES -BBFILES += "${LAYERDIR}/recipes-*/*/*.bb \ - ${LAYERDIR}/recipes-*/*/*.bbappend" - -LAYERDEPENDS_fsl-arm-extra = "core linutronix" - -BBFILE_COLLECTIONS += "mini" -BBFILE_PATTERN_mini = "^${LAYERDIR}/" -BBFILE_PRIORITY_mini = "7" diff --git a/distribution/yocto-advanced/poky/meta-mini/conf/machine/beaglebone-black.conf b/distribution/yocto-advanced/poky/meta-mini/conf/machine/beaglebone-black.conf deleted file mode 100644 index 8e6dbcd..0000000 --- a/distribution/yocto-advanced/poky/meta-mini/conf/machine/beaglebone-black.conf +++ /dev/null @@ -1,24 +0,0 @@ -#@TYPE: Machine -#@NAME: BeagleBone Black -#@DESCRIPTION: Machine configuration for the http://beagleboard.org/bone board - -require conf/machine/include/ti33x.inc - -IMAGE_FSTYPES += "sdcard ext3 tar.gz" -EXTRA_IMAGEDEPENDS += "u-boot" - -SERIAL_CONSOLE = "115200 ttyO0" - -PREFERRED_PROVIDER_virtual/kernel = "linux-vanilla" -PREFERRED_PROVIDER_virtual/bootloader = "u-boot" -PREFERRED_PROVIDER_u-boot= "u-boot" - -SPL_BINARY = "MLO" -UBOOT_SUFFIX = "img" -UBOOT_MACHINE = "am335x_boneblack_config" -UBOOT_ENTRYPOINT = "0x80008000" -UBOOT_LOADADDRESS = "0x80008000" - -IMAGE_CLASSES += "image_sdcard" -SDCARD_ROOTFS ?= "${DEPLOY_DIR_IMAGE}/${IMAGE_NAME}.rootfs.ext3" -IMAGE_FSTYPES += "sdcard" diff --git a/distribution/yocto-advanced/poky/meta-mini/conf/machine/imx6qsabrelite.conf b/distribution/yocto-advanced/poky/meta-mini/conf/machine/imx6qsabrelite.conf deleted file mode 100644 index 90f6864..0000000 --- a/distribution/yocto-advanced/poky/meta-mini/conf/machine/imx6qsabrelite.conf +++ /dev/null @@ -1,37 +0,0 @@ -#@TYPE: Machine -#@NAME: SabreLite -#@SOC: i.MX6Q -#@DESCRIPTION: Machine configuration for Boundary Devices SabreLite -#@MAINTAINER: Manuel Traut - -include conf/machine/include/imx-base.inc -include conf/machine/include/tune-cortexa9.inc - -SOC_FAMILY = "mx6:mx6dl:mx6q" - -PREFERRED_PROVIDER_virtual/kernel = "linux-vanilla" -KERNEL_DEVICETREE = "imx6q-sabrelite.dtb" - -# Ensure boot scripts will be available at rootfs time -do_rootfs[depends] += "u-boot-script:do_deploy" - -# Boot scripts to install -BOOT_SCRIPTS = "6x_bootscript-${MACHINE}:6x_bootscript" - -UBOOT_MACHINE ?= "nitrogen6q_config" -SERIAL_CONSOLE = "115200 ttymxc1" - -IMAGE_FSTYPES += "tar.bz2 ext3" - -# avoid this error -# ERROR: QA Issue: eglibc-locale: Files/directories were installed but not -# shipped -# /usr/bin -# /usr/lib -# /usr/share/i18n -# /usr/share/i18n/locales -# /usr/share/i18n/locales/POSIX -ENABLE_BINARY_LOCALE_GENERATION = "0" - -# custom init process -# APPEND = "${APPEND} init=/usr/bin/hello" diff --git a/distribution/yocto-advanced/poky/meta-mini/conf/machine/include/fsl-default-settings.inc b/distribution/yocto-advanced/poky/meta-mini/conf/machine/include/fsl-default-settings.inc deleted file mode 100644 index b36e75a..0000000 --- a/distribution/yocto-advanced/poky/meta-mini/conf/machine/include/fsl-default-settings.inc +++ /dev/null @@ -1,3 +0,0 @@ -# Freescale BSP default settings - -IMAGE_CLASSES += "image_types_fsl" diff --git a/distribution/yocto-advanced/poky/meta-mini/conf/machine/include/imx-base.inc b/distribution/yocto-advanced/poky/meta-mini/conf/machine/include/imx-base.inc deleted file mode 100644 index 247eb62..0000000 --- a/distribution/yocto-advanced/poky/meta-mini/conf/machine/include/imx-base.inc +++ /dev/null @@ -1,30 +0,0 @@ -# Provides the i.MX common settings - -include conf/machine/include/fsl-default-settings.inc -include conf/machine/include/soc-family.inc - -# Set specific make target and binary suffix -UBOOT_MAKE_TARGET = "u-boot.imx" -UBOOT_SUFFIX ?= "imx" - -UBOOT_ENTRYPOINT_mx6 = "0x10008000" - -# Float-Point setting -DEFAULTTUNE_mx6 ?= "cortexa9hf-neon" - -# Sub-architecture support -MACHINE_SOCARCH ?= "" -MACHINE_SOCARCH_mx6 = "${TUNE_PKGARCH}-mx6" -PACKAGE_EXTRA_ARCHS_append = " ${MACHINE_SOCARCH}" - -MACHINE_ARCH_FILTER = "virtual/kernel" -INHERIT += "fsl-dynamic-packagearch" - -SDCARD_ROOTFS ?= "${DEPLOY_DIR_IMAGE}/${IMAGE_NAME}.rootfs.ext3" -IMAGE_FSTYPES ?= "tar.bz2 ext3 sdcard" - -SERIAL_CONSOLE = "115200 ttymxc0" - -KERNEL_IMAGETYPE = "uImage" - -MACHINE_FEATURES = "" diff --git a/distribution/yocto-advanced/poky/meta-mini/conf/machine/include/imx6sabreauto-common.inc b/distribution/yocto-advanced/poky/meta-mini/conf/machine/include/imx6sabreauto-common.inc deleted file mode 100644 index e35bc82..0000000 --- a/distribution/yocto-advanced/poky/meta-mini/conf/machine/include/imx6sabreauto-common.inc +++ /dev/null @@ -1,6 +0,0 @@ -# Provides the i.MX6 SABRE AUTO common settings - -require conf/machine/include/imx-base.inc -require conf/machine/include/tune-cortexa9.inc - -SERIAL_CONSOLE = "115200 ttymxc3" diff --git a/distribution/yocto-advanced/poky/meta-mini/conf/machine/include/imx6sabresd-common.inc b/distribution/yocto-advanced/poky/meta-mini/conf/machine/include/imx6sabresd-common.inc deleted file mode 100644 index 21a23b8..0000000 --- a/distribution/yocto-advanced/poky/meta-mini/conf/machine/include/imx6sabresd-common.inc +++ /dev/null @@ -1,6 +0,0 @@ -# Provides the i.MX6 SABRE SD common settings - -require conf/machine/include/imx-base.inc -require conf/machine/include/tune-cortexa9.inc - -SERIAL_CONSOLE = "115200 ttymxc0" diff --git a/distribution/yocto-advanced/poky/meta-mini/conf/machine/include/ti33x.inc b/distribution/yocto-advanced/poky/meta-mini/conf/machine/include/ti33x.inc deleted file mode 100644 index 6e47a6d..0000000 --- a/distribution/yocto-advanced/poky/meta-mini/conf/machine/include/ti33x.inc +++ /dev/null @@ -1,22 +0,0 @@ -SOC_FAMILY = "ti33x" -require conf/machine/include/soc-family.inc - -DEFAULTTUNE ?= "cortexa8thf-neon" -require conf/machine/include/tune-cortexa8.inc - -KERNEL_IMAGETYPE = "zImage" - -UBOOT_ARCH = "arm" -UBOOT_MACHINE = "am335x_evm_config" - -UBOOT_ENTRYPOINT = "0x80008000" -UBOOT_LOADADDRESS = "0x80008000" - -# Use the expected value of the ubifs filesystem's volume name in the kernel -# and u-boot. -UBI_VOLNAME = "rootfs" - -# EXTRA_IMAGEDEPENDS += "u-boot" - -# List common SoC features, may need to add touchscreen for specific machines -MACHINE_FEATURES = " " diff --git a/distribution/yocto-advanced/poky/meta-mini/recipes-bsp/mini-image/maxi-mini-image.bb b/distribution/yocto-advanced/poky/meta-mini/recipes-bsp/mini-image/maxi-mini-image.bb deleted file mode 100644 index 3808764..0000000 --- a/distribution/yocto-advanced/poky/meta-mini/recipes-bsp/mini-image/maxi-mini-image.bb +++ /dev/null @@ -1,3 +0,0 @@ -require /home/local/src/poky/meta-mini/recipes-bsp/mini-image/mini-image.bb -IMAGE_INSTALL = "glibc hello hellocm autohello" -DESCRIPTION = "" diff --git a/distribution/yocto-advanced/poky/meta-mini/recipes-bsp/mini-image/mini-image.bb b/distribution/yocto-advanced/poky/meta-mini/recipes-bsp/mini-image/mini-image.bb deleted file mode 100644 index e2536a9..0000000 --- a/distribution/yocto-advanced/poky/meta-mini/recipes-bsp/mini-image/mini-image.bb +++ /dev/null @@ -1,3 +0,0 @@ -IMAGE_LINGUAS = " " -inherit core-image -IMAGE_INSTALL += "sysvinit" diff --git a/distribution/yocto-advanced/poky/meta-mini/recipes-bsp/mini-image/tiny-image.bb b/distribution/yocto-advanced/poky/meta-mini/recipes-bsp/mini-image/tiny-image.bb deleted file mode 100644 index ad787d5..0000000 --- a/distribution/yocto-advanced/poky/meta-mini/recipes-bsp/mini-image/tiny-image.bb +++ /dev/null @@ -1,3 +0,0 @@ -require recipes-bsp/mini-image/mini-image.bb -IMAGE_INSTALL = "eglibc hello hellocm autohello" -DESCRIPTION = "" diff --git a/distribution/yocto-advanced/poky/meta-mini/recipes-bsp/u-boot/u-boot-script_git.bb b/distribution/yocto-advanced/poky/meta-mini/recipes-bsp/u-boot/u-boot-script_git.bb deleted file mode 100644 index c0b88e1..0000000 --- a/distribution/yocto-advanced/poky/meta-mini/recipes-bsp/u-boot/u-boot-script_git.bb +++ /dev/null @@ -1,63 +0,0 @@ -LICENSE = "GPLv2+" -LIC_FILES_CHKSUM = "file://Licenses/README;md5=025bf9f768cbcb1a165dbe1a110babfb" -DEPENDS = "u-boot-mkimage-native" - -PV = "v2014.01+git${SRCPV}" - -SRCREV = "aed9475361820a65e37ed936c833322cbbc0f2b5" -SRCBRANCH = "v2014.04-20140419" -SRC_URI = "git://github.com/boundarydevices/u-boot-imx6.git;protocol=https;branch=${SRCBRANCH}" - -S = "${WORKDIR}/git" - -inherit deploy - -do_mkimage () { - - # allow deploy to use the ${MACHINE} name to simplify things - if [ ! -d board/boundary/${MACHINE} ]; then - mkdir board/boundary/${MACHINE} - fi - bootscript=board/boundary/nitrogen6x/6x_bootscript-yocto.txt; - if ! [ -f $bootscript ]; then - bootscript=board/boundary/nitrogen6x/6x_bootscript-yocto.txt; - fi - echo "bootscript == $bootscript" - - upgradescript=board/boundary/nitrogen6x/6x_upgrade.txt; - if ! [ -f $upgradescript ]; then - upgradescript=board/boundary/nitrogen6x/6x_upgrade.txt; - fi - - uboot-mkimage -A arm -O linux -T script -C none -a 0 -e 0 \ - -n "boot script" -d $bootscript \ - board/boundary/${MACHINE}/6x_bootscript - - uboot-mkimage -A arm -O linux -T script -C none -a 0 -e 0 \ - -n "upgrade script" -d $upgradescript \ - board/boundary/${MACHINE}/6x_upgrade -} - -addtask mkimage after do_compile before do_install - -do_deploy () { - install -d ${DEPLOYDIR} - install ${S}/board/boundary/${MACHINE}/6x_bootscript \ - ${DEPLOYDIR}/6x_bootscript-${MACHINE}-${PV}-${PR} - install ${S}/board/boundary/${MACHINE}/6x_upgrade \ - ${DEPLOYDIR}/6x_upgrade-${MACHINE}-${PV}-${PR} - - cd ${DEPLOYDIR} - rm -f 6x_bootscript-${MACHINE} 6x_upgrade-${MACHINE} - ln -sf 6x_bootscript-${MACHINE}-${PV}-${PR} 6x_bootscript-${MACHINE} - ln -sf 6x_upgrade-${MACHINE}-${PV}-${PR} 6x_upgrade-${MACHINE} -} - -addtask deploy after do_install before do_build - -do_compile[noexec] = "1" -do_install[noexec] = "1" -do_populate_sysroot[noexec] = "1" - -PACKAGE_ARCH = "${MACHINE_ARCH}" -COMPATIBLE_MACHINE = "(imx6qsabrelite)" diff --git a/distribution/yocto-advanced/poky/meta-mini/recipes-bsp/u-boot/u-boot.inc b/distribution/yocto-advanced/poky/meta-mini/recipes-bsp/u-boot/u-boot.inc deleted file mode 100644 index f49bb5d..0000000 --- a/distribution/yocto-advanced/poky/meta-mini/recipes-bsp/u-boot/u-boot.inc +++ /dev/null @@ -1,88 +0,0 @@ -SUMMARY = "Universal Boot Loader for embedded devices" -HOMEPAGE = "http://www.denx.de/wiki/U-Boot/WebHome" -SECTION = "bootloaders" -PROVIDES = "virtual/bootloader" - -inherit uboot-config deploy - -EXTRA_OEMAKE = 'CROSS_COMPILE=${TARGET_PREFIX} CC="${TARGET_PREFIX}gcc ${TOOLCHAIN_OPTIONS}"' - -# Allow setting an additional version string that will be picked up by the -# u-boot build system and appended to the u-boot version. If the .scmversion -# file already exists it will not be overwritten. -UBOOT_LOCALVERSION ?= "" - -# Some versions of u-boot use .bin and others use .img. By default use .bin -# but enable individual recipes to change this value. -UBOOT_SUFFIX ?= "bin" -UBOOT_IMAGE ?= "u-boot-${MACHINE}-${PV}-${PR}.${UBOOT_SUFFIX}" -UBOOT_BINARY ?= "u-boot.${UBOOT_SUFFIX}" -UBOOT_SYMLINK ?= "u-boot-${MACHINE}.${UBOOT_SUFFIX}" -UBOOT_MAKE_TARGET ?= "all" - -# Some versions of u-boot build an SPL (Second Program Loader) image that -# should be packaged along with the u-boot binary as well as placed in the -# deploy directory. For those versions they can set the following variables -# to allow packaging the SPL. -SPL_BINARY ?= "" -SPL_IMAGE ?= "${SPL_BINARY}-${MACHINE}-${PV}-${PR}" -SPL_SYMLINK ?= "${SPL_BINARY}-${MACHINE}" - -do_compile () { - if [ "${@base_contains('DISTRO_FEATURES', 'ld-is-gold', 'ld-is-gold', '', d)}" = "ld-is-gold" ] ; then - sed -i 's/$(CROSS_COMPILE)ld$/$(CROSS_COMPILE)ld.bfd/g' config.mk - fi - - unset LDFLAGS - unset CFLAGS - unset CPPFLAGS - - if [ ! -e ${B}/.scmversion -a ! -e ${S}/.scmversion ] - then - echo ${UBOOT_LOCALVERSION} > ${B}/.scmversion - echo ${UBOOT_LOCALVERSION} > ${S}/.scmversion - fi - - oe_runmake ${UBOOT_MACHINE} - oe_runmake ${UBOOT_MAKE_TARGET} -} - -do_install () { - install -d ${D}/boot - install ${S}/${UBOOT_BINARY} ${D}/boot/${UBOOT_IMAGE} - ln -sf ${UBOOT_IMAGE} ${D}/boot/${UBOOT_BINARY} - - if [ -e ${WORKDIR}/fw_env.config ] ; then - install -d ${D}${sysconfdir} - install -m 644 ${WORKDIR}/fw_env.config ${D}${sysconfdir}/fw_env.config - fi - - if [ "x${SPL_BINARY}" != "x" ] - then - install ${S}/${SPL_BINARY} ${D}/boot/${SPL_IMAGE} - ln -sf ${SPL_IMAGE} ${D}/boot/${SPL_BINARY} - fi -} - -FILES_${PN} = "/boot ${sysconfdir}" -FILESPATH =. "${FILE_DIRNAME}/u-boot-git/${MACHINE}:" - -do_deploy () { - install -d ${DEPLOYDIR} - install ${S}/${UBOOT_BINARY} ${DEPLOYDIR}/${UBOOT_IMAGE} - - cd ${DEPLOYDIR} - rm -f ${UBOOT_BINARY} ${UBOOT_SYMLINK} - ln -sf ${UBOOT_IMAGE} ${UBOOT_SYMLINK} - ln -sf ${UBOOT_IMAGE} ${UBOOT_BINARY} - - if [ "x${SPL_BINARY}" != "x" ] - then - install ${S}/${SPL_BINARY} ${DEPLOYDIR}/${SPL_IMAGE} - rm -f ${DEPLOYDIR}/${SPL_BINARY} ${DEPLOYDIR}/${SPL_SYMLINK} - ln -sf ${SPL_IMAGE} ${DEPLOYDIR}/${SPL_BINARY} - ln -sf ${SPL_IMAGE} ${DEPLOYDIR}/${SPL_SYMLINK} - fi -} - -addtask deploy before do_build after do_compile diff --git a/distribution/yocto-advanced/poky/meta-mini/recipes-bsp/u-boot/u-boot_2014.07.bb b/distribution/yocto-advanced/poky/meta-mini/recipes-bsp/u-boot/u-boot_2014.07.bb deleted file mode 100644 index e53f51e..0000000 --- a/distribution/yocto-advanced/poky/meta-mini/recipes-bsp/u-boot/u-boot_2014.07.bb +++ /dev/null @@ -1,26 +0,0 @@ -require u-boot.inc - -# To build u-boot for your machine, provide the following lines in your machine -# config, replacing the assignments as appropriate for your machine. -# UBOOT_MACHINE = "omap3_beagle_config" -# UBOOT_ENTRYPOINT = "0x80008000" -# UBOOT_LOADADDRESS = "0x80008000" - -LICENSE = "GPLv2+" -LIC_FILES_CHKSUM = "file://README;beginline=1;endline=6;md5=157ab8408beab40cd8ce1dc69f702a6c" - -# This revision corresponds to the tag "v2013.07" -# We use the revision in order to avoid having to fetch it from the repo during parse -SRCREV = "524123a70761110c5cf3ccc5f52f6d4da071b959" - -PV = "v2014.07+git${SRCPV}" - -SRC_URI = "git://git.denx.de/u-boot.git;branch=master" - -S = "${WORKDIR}/git" - -PACKAGE_ARCH = "${MACHINE_ARCH}" - -do_deploy_append () { - echo "bootpart=0" > ${DEPLOYDIR}/uEnv.txt -} diff --git a/distribution/yocto-advanced/poky/meta-mini/recipes-core/eglibc/eglibc-locale_2.19.bbappend b/distribution/yocto-advanced/poky/meta-mini/recipes-core/eglibc/eglibc-locale_2.19.bbappend deleted file mode 100644 index 51f69e5..0000000 --- a/distribution/yocto-advanced/poky/meta-mini/recipes-core/eglibc/eglibc-locale_2.19.bbappend +++ /dev/null @@ -1,2 +0,0 @@ -do_package_qa () { -} diff --git a/distribution/yocto-advanced/poky/meta-mini/recipes-hello/autohello/autohello_1.0.bb b/distribution/yocto-advanced/poky/meta-mini/recipes-hello/autohello/autohello_1.0.bb deleted file mode 100644 index e9c79f9..0000000 --- a/distribution/yocto-advanced/poky/meta-mini/recipes-hello/autohello/autohello_1.0.bb +++ /dev/null @@ -1,9 +0,0 @@ -DESCRIPTION = "GNU Helloworld application" -SECTION = "examples" -LICENSE = "GPLv2+" -LIC_FILES_CHKSUM = "file://COPYING;md5=d32239bcb673463ab874e80d47fae504" -PR = "r0" - -SRC_URI = "file://autohello-${PV}.tar.gz" -SRC_URI[md5sum] = "4bfc9bed4d5d67a266d93e99e5883211" -inherit autotools diff --git a/distribution/yocto-advanced/poky/meta-mini/recipes-hello/autohello/autohello_1.1.bb b/distribution/yocto-advanced/poky/meta-mini/recipes-hello/autohello/autohello_1.1.bb deleted file mode 100644 index 96d92f4..0000000 --- a/distribution/yocto-advanced/poky/meta-mini/recipes-hello/autohello/autohello_1.1.bb +++ /dev/null @@ -1,8 +0,0 @@ -DESCRIPTION = "GNU Helloworld application" -SECTION = "examples" -LICENSE = "GPLv2+" -LIC_FILES_CHKSUM = "file://COPYING;md5=d32239bcb673463ab874e80d47fae504" -PR = "r0" - -SRC_URI = "file://autohello-${PV}.tar.gz" -inherit autotools diff --git a/distribution/yocto-advanced/poky/meta-mini/recipes-hello/autohello/files/autohello-1.0.tar.gz b/distribution/yocto-advanced/poky/meta-mini/recipes-hello/autohello/files/autohello-1.0.tar.gz deleted file mode 100644 index 424b53c..0000000 Binary files a/distribution/yocto-advanced/poky/meta-mini/recipes-hello/autohello/files/autohello-1.0.tar.gz and /dev/null differ diff --git a/distribution/yocto-advanced/poky/meta-mini/recipes-hello/autohello/files/autohello-1.1.tar.gz b/distribution/yocto-advanced/poky/meta-mini/recipes-hello/autohello/files/autohello-1.1.tar.gz deleted file mode 100644 index 60e820c..0000000 Binary files a/distribution/yocto-advanced/poky/meta-mini/recipes-hello/autohello/files/autohello-1.1.tar.gz and /dev/null differ diff --git a/distribution/yocto-advanced/poky/meta-mini/recipes-hello/autohello/files/autohello/.deps/autohello.Po b/distribution/yocto-advanced/poky/meta-mini/recipes-hello/autohello/files/autohello/.deps/autohello.Po deleted file mode 100644 index 9ce06a8..0000000 --- a/distribution/yocto-advanced/poky/meta-mini/recipes-hello/autohello/files/autohello/.deps/autohello.Po +++ /dev/null @@ -1 +0,0 @@ -# dummy diff --git a/distribution/yocto-advanced/poky/meta-mini/recipes-hello/autohello/files/autohello/AUTHORS b/distribution/yocto-advanced/poky/meta-mini/recipes-hello/autohello/files/autohello/AUTHORS deleted file mode 100644 index e69de29..0000000 diff --git a/distribution/yocto-advanced/poky/meta-mini/recipes-hello/autohello/files/autohello/COPYING b/distribution/yocto-advanced/poky/meta-mini/recipes-hello/autohello/files/autohello/COPYING deleted file mode 120000 index caeca07..0000000 --- a/distribution/yocto-advanced/poky/meta-mini/recipes-hello/autohello/files/autohello/COPYING +++ /dev/null @@ -1 +0,0 @@ -/usr/share/automake-1.14/COPYING \ No newline at end of file diff --git a/distribution/yocto-advanced/poky/meta-mini/recipes-hello/autohello/files/autohello/ChangeLog b/distribution/yocto-advanced/poky/meta-mini/recipes-hello/autohello/files/autohello/ChangeLog deleted file mode 100644 index e69de29..0000000 diff --git a/distribution/yocto-advanced/poky/meta-mini/recipes-hello/autohello/files/autohello/INSTALL b/distribution/yocto-advanced/poky/meta-mini/recipes-hello/autohello/files/autohello/INSTALL deleted file mode 120000 index f812f5a..0000000 --- a/distribution/yocto-advanced/poky/meta-mini/recipes-hello/autohello/files/autohello/INSTALL +++ /dev/null @@ -1 +0,0 @@ -/usr/share/automake-1.14/INSTALL \ No newline at end of file diff --git a/distribution/yocto-advanced/poky/meta-mini/recipes-hello/autohello/files/autohello/Makefile b/distribution/yocto-advanced/poky/meta-mini/recipes-hello/autohello/files/autohello/Makefile deleted file mode 100644 index b693fd1..0000000 --- a/distribution/yocto-advanced/poky/meta-mini/recipes-hello/autohello/files/autohello/Makefile +++ /dev/null @@ -1,736 +0,0 @@ -# Makefile.in generated by automake 1.14.1 from Makefile.am. -# Makefile. Generated from Makefile.in by configure. - -# Copyright (C) 1994-2013 Free Software Foundation, Inc. - -# This Makefile.in is free software; the Free Software Foundation -# gives unlimited permission to copy and/or distribute it, -# with or without modifications, as long as this notice is preserved. - -# This program is distributed in the hope that it will be useful, -# but WITHOUT ANY WARRANTY, to the extent permitted by law; without -# even the implied warranty of MERCHANTABILITY or FITNESS FOR A -# PARTICULAR PURPOSE. - - - - -am__is_gnu_make = test -n '$(MAKEFILE_LIST)' && test -n '$(MAKELEVEL)' -am__make_running_with_option = \ - case $${target_option-} in \ - ?) ;; \ - *) echo "am__make_running_with_option: internal error: invalid" \ - "target option '$${target_option-}' specified" >&2; \ - exit 1;; \ - esac; \ - has_opt=no; \ - sane_makeflags=$$MAKEFLAGS; \ - if $(am__is_gnu_make); then \ - sane_makeflags=$$MFLAGS; \ - else \ - case $$MAKEFLAGS in \ - *\\[\ \ ]*) \ - bs=\\; \ - sane_makeflags=`printf '%s\n' "$$MAKEFLAGS" \ - | sed "s/$$bs$$bs[$$bs $$bs ]*//g"`;; \ - esac; \ - fi; \ - skip_next=no; \ - strip_trailopt () \ - { \ - flg=`printf '%s\n' "$$flg" | sed "s/$$1.*$$//"`; \ - }; \ - for flg in $$sane_makeflags; do \ - test $$skip_next = yes && { skip_next=no; continue; }; \ - case $$flg in \ - *=*|--*) continue;; \ - -*I) strip_trailopt 'I'; skip_next=yes;; \ - -*I?*) strip_trailopt 'I';; \ - -*O) strip_trailopt 'O'; skip_next=yes;; \ - -*O?*) strip_trailopt 'O';; \ - -*l) strip_trailopt 'l'; skip_next=yes;; \ - -*l?*) strip_trailopt 'l';; \ - -[dEDm]) skip_next=yes;; \ - -[JT]) skip_next=yes;; \ - esac; \ - case $$flg in \ - *$$target_option*) has_opt=yes; break;; \ - esac; \ - done; \ - test $$has_opt = yes -am__make_dryrun = (target_option=n; $(am__make_running_with_option)) -am__make_keepgoing = (target_option=k; $(am__make_running_with_option)) -pkgdatadir = $(datadir)/autohello -pkgincludedir = $(includedir)/autohello -pkglibdir = $(libdir)/autohello -pkglibexecdir = $(libexecdir)/autohello -am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd -install_sh_DATA = $(install_sh) -c -m 644 -install_sh_PROGRAM = $(install_sh) -c -install_sh_SCRIPT = $(install_sh) -c -INSTALL_HEADER = $(INSTALL_DATA) -transform = $(program_transform_name) -NORMAL_INSTALL = : -PRE_INSTALL = : -POST_INSTALL = : -NORMAL_UNINSTALL = : -PRE_UNINSTALL = : -POST_UNINSTALL = : -bin_PROGRAMS = autohello$(EXEEXT) -subdir = . -DIST_COMMON = INSTALL NEWS README AUTHORS ChangeLog \ - $(srcdir)/Makefile.in $(srcdir)/Makefile.am \ - $(top_srcdir)/configure $(am__configure_deps) \ - $(srcdir)/config.h.in depcomp COPYING compile install-sh \ - missing -ACLOCAL_M4 = $(top_srcdir)/aclocal.m4 -am__aclocal_m4_deps = $(top_srcdir)/configure.ac -am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \ - $(ACLOCAL_M4) -am__CONFIG_DISTCLEAN_FILES = config.status config.cache config.log \ - configure.lineno config.status.lineno -mkinstalldirs = $(install_sh) -d -CONFIG_HEADER = config.h -CONFIG_CLEAN_FILES = -CONFIG_CLEAN_VPATH_FILES = -am__installdirs = "$(DESTDIR)$(bindir)" -PROGRAMS = $(bin_PROGRAMS) -am_autohello_OBJECTS = autohello.$(OBJEXT) -autohello_OBJECTS = $(am_autohello_OBJECTS) -autohello_LDADD = $(LDADD) -AM_V_P = $(am__v_P_$(V)) -am__v_P_ = $(am__v_P_$(AM_DEFAULT_VERBOSITY)) -am__v_P_0 = false -am__v_P_1 = : -AM_V_GEN = $(am__v_GEN_$(V)) -am__v_GEN_ = $(am__v_GEN_$(AM_DEFAULT_VERBOSITY)) -am__v_GEN_0 = @echo " GEN " $@; -am__v_GEN_1 = -AM_V_at = $(am__v_at_$(V)) -am__v_at_ = $(am__v_at_$(AM_DEFAULT_VERBOSITY)) -am__v_at_0 = @ -am__v_at_1 = -DEFAULT_INCLUDES = -I. -depcomp = $(SHELL) $(top_srcdir)/depcomp -am__depfiles_maybe = depfiles -am__mv = mv -f -COMPILE = $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) \ - $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -AM_V_CC = $(am__v_CC_$(V)) -am__v_CC_ = $(am__v_CC_$(AM_DEFAULT_VERBOSITY)) -am__v_CC_0 = @echo " CC " $@; -am__v_CC_1 = -CCLD = $(CC) -LINK = $(CCLD) $(AM_CFLAGS) $(CFLAGS) $(AM_LDFLAGS) $(LDFLAGS) -o $@ -AM_V_CCLD = $(am__v_CCLD_$(V)) -am__v_CCLD_ = $(am__v_CCLD_$(AM_DEFAULT_VERBOSITY)) -am__v_CCLD_0 = @echo " CCLD " $@; -am__v_CCLD_1 = -SOURCES = $(autohello_SOURCES) -DIST_SOURCES = $(autohello_SOURCES) -am__can_run_installinfo = \ - case $$AM_UPDATE_INFO_DIR in \ - n|no|NO) false;; \ - *) (install-info --version) >/dev/null 2>&1;; \ - esac -am__tagged_files = $(HEADERS) $(SOURCES) $(TAGS_FILES) \ - $(LISP)config.h.in -# Read a list of newline-separated strings from the standard input, -# and print each of them once, without duplicates. Input order is -# *not* preserved. -am__uniquify_input = $(AWK) '\ - BEGIN { nonempty = 0; } \ - { items[$$0] = 1; nonempty = 1; } \ - END { if (nonempty) { for (i in items) print i; }; } \ -' -# Make sure the list of sources is unique. This is necessary because, -# e.g., the same source file might be shared among _SOURCES variables -# for different programs/libraries. -am__define_uniq_tagged_files = \ - list='$(am__tagged_files)'; \ - unique=`for i in $$list; do \ - if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \ - done | $(am__uniquify_input)` -ETAGS = etags -CTAGS = ctags -CSCOPE = cscope -AM_RECURSIVE_TARGETS = cscope -DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST) -distdir = $(PACKAGE)-$(VERSION) -top_distdir = $(distdir) -am__remove_distdir = \ - if test -d "$(distdir)"; then \ - find "$(distdir)" -type d ! -perm -200 -exec chmod u+w {} ';' \ - && rm -rf "$(distdir)" \ - || { sleep 5 && rm -rf "$(distdir)"; }; \ - else :; fi -am__post_remove_distdir = $(am__remove_distdir) -DIST_ARCHIVES = $(distdir).tar.gz -GZIP_ENV = --best -DIST_TARGETS = dist-gzip -distuninstallcheck_listfiles = find . -type f -print -am__distuninstallcheck_listfiles = $(distuninstallcheck_listfiles) \ - | sed 's|^\./|$(prefix)/|' | grep -v '$(infodir)/dir$$' -distcleancheck_listfiles = find . -type f -print -ACLOCAL = ${SHELL} /home/local/src/poky/meta-linutronix/recipes-hello/autohello/files/autohello/missing aclocal-1.14 -AMTAR = $${TAR-tar} -AM_DEFAULT_VERBOSITY = 1 -AUTOCONF = ${SHELL} /home/local/src/poky/meta-linutronix/recipes-hello/autohello/files/autohello/missing autoconf -AUTOHEADER = ${SHELL} /home/local/src/poky/meta-linutronix/recipes-hello/autohello/files/autohello/missing autoheader -AUTOMAKE = ${SHELL} /home/local/src/poky/meta-linutronix/recipes-hello/autohello/files/autohello/missing automake-1.14 -AWK = gawk -CC = gcc -CCDEPMODE = depmode=gcc3 -CFLAGS = -g -O2 -CPPFLAGS = -CYGPATH_W = echo -DEFS = -DHAVE_CONFIG_H -DEPDIR = .deps -ECHO_C = -ECHO_N = -n -ECHO_T = -EXEEXT = -INSTALL = /usr/bin/install -c -INSTALL_DATA = ${INSTALL} -m 644 -INSTALL_PROGRAM = ${INSTALL} -INSTALL_SCRIPT = ${INSTALL} -INSTALL_STRIP_PROGRAM = $(install_sh) -c -s -LDFLAGS = -LIBOBJS = -LIBS = -LTLIBOBJS = -MAKEINFO = ${SHELL} /home/local/src/poky/meta-linutronix/recipes-hello/autohello/files/autohello/missing makeinfo -MKDIR_P = /bin/mkdir -p -OBJEXT = o -PACKAGE = autohello -PACKAGE_BUGREPORT = maunt@linutronix.de -PACKAGE_NAME = autohello -PACKAGE_STRING = autohello 1.1 -PACKAGE_TARNAME = autohello -PACKAGE_URL = -PACKAGE_VERSION = 1.1 -PATH_SEPARATOR = : -SET_MAKE = -SHELL = /bin/bash -STRIP = -VERSION = 1.1 -abs_builddir = /home/local/src/poky/meta-linutronix/recipes-hello/autohello/files/autohello -abs_srcdir = /home/local/src/poky/meta-linutronix/recipes-hello/autohello/files/autohello -abs_top_builddir = /home/local/src/poky/meta-linutronix/recipes-hello/autohello/files/autohello -abs_top_srcdir = /home/local/src/poky/meta-linutronix/recipes-hello/autohello/files/autohello -ac_ct_CC = gcc -am__include = include -am__leading_dot = . -am__quote = -am__tar = $${TAR-tar} chof - "$$tardir" -am__untar = $${TAR-tar} xf - -bindir = ${exec_prefix}/bin -build_alias = -builddir = . -datadir = ${datarootdir} -datarootdir = ${prefix}/share -docdir = ${datarootdir}/doc/${PACKAGE_TARNAME} -dvidir = ${docdir} -exec_prefix = ${prefix} -host_alias = -htmldir = ${docdir} -includedir = ${prefix}/include -infodir = ${datarootdir}/info -install_sh = ${SHELL} /home/local/src/poky/meta-linutronix/recipes-hello/autohello/files/autohello/install-sh -libdir = ${exec_prefix}/lib -libexecdir = ${exec_prefix}/libexec -localedir = ${datarootdir}/locale -localstatedir = ${prefix}/var -mandir = ${datarootdir}/man -mkdir_p = $(MKDIR_P) -oldincludedir = /usr/include -pdfdir = ${docdir} -prefix = /usr/local -program_transform_name = s,x,x, -psdir = ${docdir} -sbindir = ${exec_prefix}/sbin -sharedstatedir = ${prefix}/com -srcdir = . -sysconfdir = ${prefix}/etc -target_alias = -top_build_prefix = -top_builddir = . -top_srcdir = . -autohello_SOURCES = autohello.c -all: config.h - $(MAKE) $(AM_MAKEFLAGS) all-am - -.SUFFIXES: -.SUFFIXES: .c .o .obj -am--refresh: Makefile - @: -$(srcdir)/Makefile.in: $(srcdir)/Makefile.am $(am__configure_deps) - @for dep in $?; do \ - case '$(am__configure_deps)' in \ - *$$dep*) \ - echo ' cd $(srcdir) && $(AUTOMAKE) --gnu'; \ - $(am__cd) $(srcdir) && $(AUTOMAKE) --gnu \ - && exit 0; \ - exit 1;; \ - esac; \ - done; \ - echo ' cd $(top_srcdir) && $(AUTOMAKE) --gnu Makefile'; \ - $(am__cd) $(top_srcdir) && \ - $(AUTOMAKE) --gnu Makefile -.PRECIOUS: Makefile -Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status - @case '$?' in \ - *config.status*) \ - echo ' $(SHELL) ./config.status'; \ - $(SHELL) ./config.status;; \ - *) \ - echo ' cd $(top_builddir) && $(SHELL) ./config.status $@ $(am__depfiles_maybe)'; \ - cd $(top_builddir) && $(SHELL) ./config.status $@ $(am__depfiles_maybe);; \ - esac; - -$(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES) - $(SHELL) ./config.status --recheck - -$(top_srcdir)/configure: $(am__configure_deps) - $(am__cd) $(srcdir) && $(AUTOCONF) -$(ACLOCAL_M4): $(am__aclocal_m4_deps) - $(am__cd) $(srcdir) && $(ACLOCAL) $(ACLOCAL_AMFLAGS) -$(am__aclocal_m4_deps): - -config.h: stamp-h1 - @test -f $@ || rm -f stamp-h1 - @test -f $@ || $(MAKE) $(AM_MAKEFLAGS) stamp-h1 - -stamp-h1: $(srcdir)/config.h.in $(top_builddir)/config.status - @rm -f stamp-h1 - cd $(top_builddir) && $(SHELL) ./config.status config.h -$(srcdir)/config.h.in: $(am__configure_deps) - ($(am__cd) $(top_srcdir) && $(AUTOHEADER)) - rm -f stamp-h1 - touch $@ - -distclean-hdr: - -rm -f config.h stamp-h1 -install-binPROGRAMS: $(bin_PROGRAMS) - @$(NORMAL_INSTALL) - @list='$(bin_PROGRAMS)'; test -n "$(bindir)" || list=; \ - if test -n "$$list"; then \ - echo " $(MKDIR_P) '$(DESTDIR)$(bindir)'"; \ - $(MKDIR_P) "$(DESTDIR)$(bindir)" || exit 1; \ - fi; \ - for p in $$list; do echo "$$p $$p"; done | \ - sed 's/$(EXEEXT)$$//' | \ - while read p p1; do if test -f $$p \ - ; then echo "$$p"; echo "$$p"; else :; fi; \ - done | \ - sed -e 'p;s,.*/,,;n;h' \ - -e 's|.*|.|' \ - -e 'p;x;s,.*/,,;s/$(EXEEXT)$$//;$(transform);s/$$/$(EXEEXT)/' | \ - sed 'N;N;N;s,\n, ,g' | \ - $(AWK) 'BEGIN { files["."] = ""; dirs["."] = 1 } \ - { d=$$3; if (dirs[d] != 1) { print "d", d; dirs[d] = 1 } \ - if ($$2 == $$4) files[d] = files[d] " " $$1; \ - else { print "f", $$3 "/" $$4, $$1; } } \ - END { for (d in files) print "f", d, files[d] }' | \ - while read type dir files; do \ - if test "$$dir" = .; then dir=; else dir=/$$dir; fi; \ - test -z "$$files" || { \ - echo " $(INSTALL_PROGRAM_ENV) $(INSTALL_PROGRAM) $$files '$(DESTDIR)$(bindir)$$dir'"; \ - $(INSTALL_PROGRAM_ENV) $(INSTALL_PROGRAM) $$files "$(DESTDIR)$(bindir)$$dir" || exit $$?; \ - } \ - ; done - -uninstall-binPROGRAMS: - @$(NORMAL_UNINSTALL) - @list='$(bin_PROGRAMS)'; test -n "$(bindir)" || list=; \ - files=`for p in $$list; do echo "$$p"; done | \ - sed -e 'h;s,^.*/,,;s/$(EXEEXT)$$//;$(transform)' \ - -e 's/$$/$(EXEEXT)/' \ - `; \ - test -n "$$list" || exit 0; \ - echo " ( cd '$(DESTDIR)$(bindir)' && rm -f" $$files ")"; \ - cd "$(DESTDIR)$(bindir)" && rm -f $$files - -clean-binPROGRAMS: - -test -z "$(bin_PROGRAMS)" || rm -f $(bin_PROGRAMS) - -autohello$(EXEEXT): $(autohello_OBJECTS) $(autohello_DEPENDENCIES) $(EXTRA_autohello_DEPENDENCIES) - @rm -f autohello$(EXEEXT) - $(AM_V_CCLD)$(LINK) $(autohello_OBJECTS) $(autohello_LDADD) $(LIBS) - -mostlyclean-compile: - -rm -f *.$(OBJEXT) - -distclean-compile: - -rm -f *.tab.c - -include ./$(DEPDIR)/autohello.Po - -.c.o: - $(AM_V_CC)$(COMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ $< - $(AM_V_at)$(am__mv) $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po -# $(AM_V_CC)source='$<' object='$@' libtool=no \ -# DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) \ -# $(AM_V_CC_no)$(COMPILE) -c -o $@ $< - -.c.obj: - $(AM_V_CC)$(COMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ `$(CYGPATH_W) '$<'` - $(AM_V_at)$(am__mv) $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po -# $(AM_V_CC)source='$<' object='$@' libtool=no \ -# DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) \ -# $(AM_V_CC_no)$(COMPILE) -c -o $@ `$(CYGPATH_W) '$<'` - -ID: $(am__tagged_files) - $(am__define_uniq_tagged_files); mkid -fID $$unique -tags: tags-am -TAGS: tags - -tags-am: $(TAGS_DEPENDENCIES) $(am__tagged_files) - set x; \ - here=`pwd`; \ - $(am__define_uniq_tagged_files); \ - shift; \ - if test -z "$(ETAGS_ARGS)$$*$$unique"; then :; else \ - test -n "$$unique" || unique=$$empty_fix; \ - if test $$# -gt 0; then \ - $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \ - "$$@" $$unique; \ - else \ - $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \ - $$unique; \ - fi; \ - fi -ctags: ctags-am - -CTAGS: ctags -ctags-am: $(TAGS_DEPENDENCIES) $(am__tagged_files) - $(am__define_uniq_tagged_files); \ - test -z "$(CTAGS_ARGS)$$unique" \ - || $(CTAGS) $(CTAGSFLAGS) $(AM_CTAGSFLAGS) $(CTAGS_ARGS) \ - $$unique - -GTAGS: - here=`$(am__cd) $(top_builddir) && pwd` \ - && $(am__cd) $(top_srcdir) \ - && gtags -i $(GTAGS_ARGS) "$$here" -cscope: cscope.files - test ! -s cscope.files \ - || $(CSCOPE) -b -q $(AM_CSCOPEFLAGS) $(CSCOPEFLAGS) -i cscope.files $(CSCOPE_ARGS) -clean-cscope: - -rm -f cscope.files -cscope.files: clean-cscope cscopelist -cscopelist: cscopelist-am - -cscopelist-am: $(am__tagged_files) - list='$(am__tagged_files)'; \ - case "$(srcdir)" in \ - [\\/]* | ?:[\\/]*) sdir="$(srcdir)" ;; \ - *) sdir=$(subdir)/$(srcdir) ;; \ - esac; \ - for i in $$list; do \ - if test -f "$$i"; then \ - echo "$(subdir)/$$i"; \ - else \ - echo "$$sdir/$$i"; \ - fi; \ - done >> $(top_builddir)/cscope.files - -distclean-tags: - -rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags - -rm -f cscope.out cscope.in.out cscope.po.out cscope.files - -distdir: $(DISTFILES) - $(am__remove_distdir) - test -d "$(distdir)" || mkdir "$(distdir)" - @srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \ - topsrcdirstrip=`echo "$(top_srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \ - list='$(DISTFILES)'; \ - dist_files=`for file in $$list; do echo $$file; done | \ - sed -e "s|^$$srcdirstrip/||;t" \ - -e "s|^$$topsrcdirstrip/|$(top_builddir)/|;t"`; \ - case $$dist_files in \ - */*) $(MKDIR_P) `echo "$$dist_files" | \ - sed '/\//!d;s|^|$(distdir)/|;s,/[^/]*$$,,' | \ - sort -u` ;; \ - esac; \ - for file in $$dist_files; do \ - if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \ - if test -d $$d/$$file; then \ - dir=`echo "/$$file" | sed -e 's,/[^/]*$$,,'`; \ - if test -d "$(distdir)/$$file"; then \ - find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \ - fi; \ - if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \ - cp -fpR $(srcdir)/$$file "$(distdir)$$dir" || exit 1; \ - find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \ - fi; \ - cp -fpR $$d/$$file "$(distdir)$$dir" || exit 1; \ - else \ - test -f "$(distdir)/$$file" \ - || cp -p $$d/$$file "$(distdir)/$$file" \ - || exit 1; \ - fi; \ - done - -test -n "$(am__skip_mode_fix)" \ - || find "$(distdir)" -type d ! -perm -755 \ - -exec chmod u+rwx,go+rx {} \; -o \ - ! -type d ! -perm -444 -links 1 -exec chmod a+r {} \; -o \ - ! -type d ! -perm -400 -exec chmod a+r {} \; -o \ - ! -type d ! -perm -444 -exec $(install_sh) -c -m a+r {} {} \; \ - || chmod -R a+r "$(distdir)" -dist-gzip: distdir - tardir=$(distdir) && $(am__tar) | GZIP=$(GZIP_ENV) gzip -c >$(distdir).tar.gz - $(am__post_remove_distdir) - -dist-bzip2: distdir - tardir=$(distdir) && $(am__tar) | BZIP2=$${BZIP2--9} bzip2 -c >$(distdir).tar.bz2 - $(am__post_remove_distdir) - -dist-lzip: distdir - tardir=$(distdir) && $(am__tar) | lzip -c $${LZIP_OPT--9} >$(distdir).tar.lz - $(am__post_remove_distdir) - -dist-xz: distdir - tardir=$(distdir) && $(am__tar) | XZ_OPT=$${XZ_OPT--e} xz -c >$(distdir).tar.xz - $(am__post_remove_distdir) - -dist-tarZ: distdir - @echo WARNING: "Support for shar distribution archives is" \ - "deprecated." >&2 - @echo WARNING: "It will be removed altogether in Automake 2.0" >&2 - tardir=$(distdir) && $(am__tar) | compress -c >$(distdir).tar.Z - $(am__post_remove_distdir) - -dist-shar: distdir - @echo WARNING: "Support for distribution archives compressed with" \ - "legacy program 'compress' is deprecated." >&2 - @echo WARNING: "It will be removed altogether in Automake 2.0" >&2 - shar $(distdir) | GZIP=$(GZIP_ENV) gzip -c >$(distdir).shar.gz - $(am__post_remove_distdir) - -dist-zip: distdir - -rm -f $(distdir).zip - zip -rq $(distdir).zip $(distdir) - $(am__post_remove_distdir) - -dist dist-all: - $(MAKE) $(AM_MAKEFLAGS) $(DIST_TARGETS) am__post_remove_distdir='@:' - $(am__post_remove_distdir) - -# This target untars the dist file and tries a VPATH configuration. Then -# it guarantees that the distribution is self-contained by making another -# tarfile. -distcheck: dist - case '$(DIST_ARCHIVES)' in \ - *.tar.gz*) \ - GZIP=$(GZIP_ENV) gzip -dc $(distdir).tar.gz | $(am__untar) ;;\ - *.tar.bz2*) \ - bzip2 -dc $(distdir).tar.bz2 | $(am__untar) ;;\ - *.tar.lz*) \ - lzip -dc $(distdir).tar.lz | $(am__untar) ;;\ - *.tar.xz*) \ - xz -dc $(distdir).tar.xz | $(am__untar) ;;\ - *.tar.Z*) \ - uncompress -c $(distdir).tar.Z | $(am__untar) ;;\ - *.shar.gz*) \ - GZIP=$(GZIP_ENV) gzip -dc $(distdir).shar.gz | unshar ;;\ - *.zip*) \ - unzip $(distdir).zip ;;\ - esac - chmod -R a-w $(distdir) - chmod u+w $(distdir) - mkdir $(distdir)/_build $(distdir)/_inst - chmod a-w $(distdir) - test -d $(distdir)/_build || exit 0; \ - dc_install_base=`$(am__cd) $(distdir)/_inst && pwd | sed -e 's,^[^:\\/]:[\\/],/,'` \ - && dc_destdir="$${TMPDIR-/tmp}/am-dc-$$$$/" \ - && am__cwd=`pwd` \ - && $(am__cd) $(distdir)/_build \ - && ../configure \ - $(AM_DISTCHECK_CONFIGURE_FLAGS) \ - $(DISTCHECK_CONFIGURE_FLAGS) \ - --srcdir=.. --prefix="$$dc_install_base" \ - && $(MAKE) $(AM_MAKEFLAGS) \ - && $(MAKE) $(AM_MAKEFLAGS) dvi \ - && $(MAKE) $(AM_MAKEFLAGS) check \ - && $(MAKE) $(AM_MAKEFLAGS) install \ - && $(MAKE) $(AM_MAKEFLAGS) installcheck \ - && $(MAKE) $(AM_MAKEFLAGS) uninstall \ - && $(MAKE) $(AM_MAKEFLAGS) distuninstallcheck_dir="$$dc_install_base" \ - distuninstallcheck \ - && chmod -R a-w "$$dc_install_base" \ - && ({ \ - (cd ../.. && umask 077 && mkdir "$$dc_destdir") \ - && $(MAKE) $(AM_MAKEFLAGS) DESTDIR="$$dc_destdir" install \ - && $(MAKE) $(AM_MAKEFLAGS) DESTDIR="$$dc_destdir" uninstall \ - && $(MAKE) $(AM_MAKEFLAGS) DESTDIR="$$dc_destdir" \ - distuninstallcheck_dir="$$dc_destdir" distuninstallcheck; \ - } || { rm -rf "$$dc_destdir"; exit 1; }) \ - && rm -rf "$$dc_destdir" \ - && $(MAKE) $(AM_MAKEFLAGS) dist \ - && rm -rf $(DIST_ARCHIVES) \ - && $(MAKE) $(AM_MAKEFLAGS) distcleancheck \ - && cd "$$am__cwd" \ - || exit 1 - $(am__post_remove_distdir) - @(echo "$(distdir) archives ready for distribution: "; \ - list='$(DIST_ARCHIVES)'; for i in $$list; do echo $$i; done) | \ - sed -e 1h -e 1s/./=/g -e 1p -e 1x -e '$$p' -e '$$x' -distuninstallcheck: - @test -n '$(distuninstallcheck_dir)' || { \ - echo 'ERROR: trying to run $@ with an empty' \ - '$$(distuninstallcheck_dir)' >&2; \ - exit 1; \ - }; \ - $(am__cd) '$(distuninstallcheck_dir)' || { \ - echo 'ERROR: cannot chdir into $(distuninstallcheck_dir)' >&2; \ - exit 1; \ - }; \ - test `$(am__distuninstallcheck_listfiles) | wc -l` -eq 0 \ - || { echo "ERROR: files left after uninstall:" ; \ - if test -n "$(DESTDIR)"; then \ - echo " (check DESTDIR support)"; \ - fi ; \ - $(distuninstallcheck_listfiles) ; \ - exit 1; } >&2 -distcleancheck: distclean - @if test '$(srcdir)' = . ; then \ - echo "ERROR: distcleancheck can only run from a VPATH build" ; \ - exit 1 ; \ - fi - @test `$(distcleancheck_listfiles) | wc -l` -eq 0 \ - || { echo "ERROR: files left in build directory after distclean:" ; \ - $(distcleancheck_listfiles) ; \ - exit 1; } >&2 -check-am: all-am -check: check-am -all-am: Makefile $(PROGRAMS) config.h -installdirs: - for dir in "$(DESTDIR)$(bindir)"; do \ - test -z "$$dir" || $(MKDIR_P) "$$dir"; \ - done -install: install-am -install-exec: install-exec-am -install-data: install-data-am -uninstall: uninstall-am - -install-am: all-am - @$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am - -installcheck: installcheck-am -install-strip: - if test -z '$(STRIP)'; then \ - $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \ - install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \ - install; \ - else \ - $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \ - install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \ - "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'" install; \ - fi -mostlyclean-generic: - -clean-generic: - -distclean-generic: - -test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES) - -test . = "$(srcdir)" || test -z "$(CONFIG_CLEAN_VPATH_FILES)" || rm -f $(CONFIG_CLEAN_VPATH_FILES) - -maintainer-clean-generic: - @echo "This command is intended for maintainers to use" - @echo "it deletes files that may require special tools to rebuild." -clean: clean-am - -clean-am: clean-binPROGRAMS clean-generic mostlyclean-am - -distclean: distclean-am - -rm -f $(am__CONFIG_DISTCLEAN_FILES) - -rm -rf ./$(DEPDIR) - -rm -f Makefile -distclean-am: clean-am distclean-compile distclean-generic \ - distclean-hdr distclean-tags - -dvi: dvi-am - -dvi-am: - -html: html-am - -html-am: - -info: info-am - -info-am: - -install-data-am: - -install-dvi: install-dvi-am - -install-dvi-am: - -install-exec-am: install-binPROGRAMS - -install-html: install-html-am - -install-html-am: - -install-info: install-info-am - -install-info-am: - -install-man: - -install-pdf: install-pdf-am - -install-pdf-am: - -install-ps: install-ps-am - -install-ps-am: - -installcheck-am: - -maintainer-clean: maintainer-clean-am - -rm -f $(am__CONFIG_DISTCLEAN_FILES) - -rm -rf $(top_srcdir)/autom4te.cache - -rm -rf ./$(DEPDIR) - -rm -f Makefile -maintainer-clean-am: distclean-am maintainer-clean-generic - -mostlyclean: mostlyclean-am - -mostlyclean-am: mostlyclean-compile mostlyclean-generic - -pdf: pdf-am - -pdf-am: - -ps: ps-am - -ps-am: - -uninstall-am: uninstall-binPROGRAMS - -.MAKE: all install-am install-strip - -.PHONY: CTAGS GTAGS TAGS all all-am am--refresh check check-am clean \ - clean-binPROGRAMS clean-cscope clean-generic cscope \ - cscopelist-am ctags ctags-am dist dist-all dist-bzip2 \ - dist-gzip dist-lzip dist-shar dist-tarZ dist-xz dist-zip \ - distcheck distclean distclean-compile distclean-generic \ - distclean-hdr distclean-tags distcleancheck distdir \ - distuninstallcheck dvi dvi-am html html-am info info-am \ - install install-am install-binPROGRAMS install-data \ - install-data-am install-dvi install-dvi-am install-exec \ - install-exec-am install-html install-html-am install-info \ - install-info-am install-man install-pdf install-pdf-am \ - install-ps install-ps-am install-strip installcheck \ - installcheck-am installdirs maintainer-clean \ - maintainer-clean-generic mostlyclean mostlyclean-compile \ - mostlyclean-generic pdf pdf-am ps ps-am tags tags-am uninstall \ - uninstall-am uninstall-binPROGRAMS - - -# Tell versions [3.59,3.63) of GNU make to not export all variables. -# Otherwise a system limit (for SysV at least) may be exceeded. -.NOEXPORT: diff --git a/distribution/yocto-advanced/poky/meta-mini/recipes-hello/autohello/files/autohello/Makefile.am b/distribution/yocto-advanced/poky/meta-mini/recipes-hello/autohello/files/autohello/Makefile.am deleted file mode 100644 index 1b344bc..0000000 --- a/distribution/yocto-advanced/poky/meta-mini/recipes-hello/autohello/files/autohello/Makefile.am +++ /dev/null @@ -1,2 +0,0 @@ -bin_PROGRAMS = autohello -autohello_SOURCES = autohello.c diff --git a/distribution/yocto-advanced/poky/meta-mini/recipes-hello/autohello/files/autohello/Makefile.in b/distribution/yocto-advanced/poky/meta-mini/recipes-hello/autohello/files/autohello/Makefile.in deleted file mode 100644 index d09fe13..0000000 --- a/distribution/yocto-advanced/poky/meta-mini/recipes-hello/autohello/files/autohello/Makefile.in +++ /dev/null @@ -1,736 +0,0 @@ -# Makefile.in generated by automake 1.14.1 from Makefile.am. -# @configure_input@ - -# Copyright (C) 1994-2013 Free Software Foundation, Inc. - -# This Makefile.in is free software; the Free Software Foundation -# gives unlimited permission to copy and/or distribute it, -# with or without modifications, as long as this notice is preserved. - -# This program is distributed in the hope that it will be useful, -# but WITHOUT ANY WARRANTY, to the extent permitted by law; without -# even the implied warranty of MERCHANTABILITY or FITNESS FOR A -# PARTICULAR PURPOSE. - -@SET_MAKE@ - -VPATH = @srcdir@ -am__is_gnu_make = test -n '$(MAKEFILE_LIST)' && test -n '$(MAKELEVEL)' -am__make_running_with_option = \ - case $${target_option-} in \ - ?) ;; \ - *) echo "am__make_running_with_option: internal error: invalid" \ - "target option '$${target_option-}' specified" >&2; \ - exit 1;; \ - esac; \ - has_opt=no; \ - sane_makeflags=$$MAKEFLAGS; \ - if $(am__is_gnu_make); then \ - sane_makeflags=$$MFLAGS; \ - else \ - case $$MAKEFLAGS in \ - *\\[\ \ ]*) \ - bs=\\; \ - sane_makeflags=`printf '%s\n' "$$MAKEFLAGS" \ - | sed "s/$$bs$$bs[$$bs $$bs ]*//g"`;; \ - esac; \ - fi; \ - skip_next=no; \ - strip_trailopt () \ - { \ - flg=`printf '%s\n' "$$flg" | sed "s/$$1.*$$//"`; \ - }; \ - for flg in $$sane_makeflags; do \ - test $$skip_next = yes && { skip_next=no; continue; }; \ - case $$flg in \ - *=*|--*) continue;; \ - -*I) strip_trailopt 'I'; skip_next=yes;; \ - -*I?*) strip_trailopt 'I';; \ - -*O) strip_trailopt 'O'; skip_next=yes;; \ - -*O?*) strip_trailopt 'O';; \ - -*l) strip_trailopt 'l'; skip_next=yes;; \ - -*l?*) strip_trailopt 'l';; \ - -[dEDm]) skip_next=yes;; \ - -[JT]) skip_next=yes;; \ - esac; \ - case $$flg in \ - *$$target_option*) has_opt=yes; break;; \ - esac; \ - done; \ - test $$has_opt = yes -am__make_dryrun = (target_option=n; $(am__make_running_with_option)) -am__make_keepgoing = (target_option=k; $(am__make_running_with_option)) -pkgdatadir = $(datadir)/@PACKAGE@ -pkgincludedir = $(includedir)/@PACKAGE@ -pkglibdir = $(libdir)/@PACKAGE@ -pkglibexecdir = $(libexecdir)/@PACKAGE@ -am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd -install_sh_DATA = $(install_sh) -c -m 644 -install_sh_PROGRAM = $(install_sh) -c -install_sh_SCRIPT = $(install_sh) -c -INSTALL_HEADER = $(INSTALL_DATA) -transform = $(program_transform_name) -NORMAL_INSTALL = : -PRE_INSTALL = : -POST_INSTALL = : -NORMAL_UNINSTALL = : -PRE_UNINSTALL = : -POST_UNINSTALL = : -bin_PROGRAMS = autohello$(EXEEXT) -subdir = . -DIST_COMMON = INSTALL NEWS README AUTHORS ChangeLog \ - $(srcdir)/Makefile.in $(srcdir)/Makefile.am \ - $(top_srcdir)/configure $(am__configure_deps) \ - $(srcdir)/config.h.in depcomp COPYING compile install-sh \ - missing -ACLOCAL_M4 = $(top_srcdir)/aclocal.m4 -am__aclocal_m4_deps = $(top_srcdir)/configure.ac -am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \ - $(ACLOCAL_M4) -am__CONFIG_DISTCLEAN_FILES = config.status config.cache config.log \ - configure.lineno config.status.lineno -mkinstalldirs = $(install_sh) -d -CONFIG_HEADER = config.h -CONFIG_CLEAN_FILES = -CONFIG_CLEAN_VPATH_FILES = -am__installdirs = "$(DESTDIR)$(bindir)" -PROGRAMS = $(bin_PROGRAMS) -am_autohello_OBJECTS = autohello.$(OBJEXT) -autohello_OBJECTS = $(am_autohello_OBJECTS) -autohello_LDADD = $(LDADD) -AM_V_P = $(am__v_P_@AM_V@) -am__v_P_ = $(am__v_P_@AM_DEFAULT_V@) -am__v_P_0 = false -am__v_P_1 = : -AM_V_GEN = $(am__v_GEN_@AM_V@) -am__v_GEN_ = $(am__v_GEN_@AM_DEFAULT_V@) -am__v_GEN_0 = @echo " GEN " $@; -am__v_GEN_1 = -AM_V_at = $(am__v_at_@AM_V@) -am__v_at_ = $(am__v_at_@AM_DEFAULT_V@) -am__v_at_0 = @ -am__v_at_1 = -DEFAULT_INCLUDES = -I.@am__isrc@ -depcomp = $(SHELL) $(top_srcdir)/depcomp -am__depfiles_maybe = depfiles -am__mv = mv -f -COMPILE = $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) \ - $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -AM_V_CC = $(am__v_CC_@AM_V@) -am__v_CC_ = $(am__v_CC_@AM_DEFAULT_V@) -am__v_CC_0 = @echo " CC " $@; -am__v_CC_1 = -CCLD = $(CC) -LINK = $(CCLD) $(AM_CFLAGS) $(CFLAGS) $(AM_LDFLAGS) $(LDFLAGS) -o $@ -AM_V_CCLD = $(am__v_CCLD_@AM_V@) -am__v_CCLD_ = $(am__v_CCLD_@AM_DEFAULT_V@) -am__v_CCLD_0 = @echo " CCLD " $@; -am__v_CCLD_1 = -SOURCES = $(autohello_SOURCES) -DIST_SOURCES = $(autohello_SOURCES) -am__can_run_installinfo = \ - case $$AM_UPDATE_INFO_DIR in \ - n|no|NO) false;; \ - *) (install-info --version) >/dev/null 2>&1;; \ - esac -am__tagged_files = $(HEADERS) $(SOURCES) $(TAGS_FILES) \ - $(LISP)config.h.in -# Read a list of newline-separated strings from the standard input, -# and print each of them once, without duplicates. Input order is -# *not* preserved. -am__uniquify_input = $(AWK) '\ - BEGIN { nonempty = 0; } \ - { items[$$0] = 1; nonempty = 1; } \ - END { if (nonempty) { for (i in items) print i; }; } \ -' -# Make sure the list of sources is unique. This is necessary because, -# e.g., the same source file might be shared among _SOURCES variables -# for different programs/libraries. -am__define_uniq_tagged_files = \ - list='$(am__tagged_files)'; \ - unique=`for i in $$list; do \ - if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \ - done | $(am__uniquify_input)` -ETAGS = etags -CTAGS = ctags -CSCOPE = cscope -AM_RECURSIVE_TARGETS = cscope -DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST) -distdir = $(PACKAGE)-$(VERSION) -top_distdir = $(distdir) -am__remove_distdir = \ - if test -d "$(distdir)"; then \ - find "$(distdir)" -type d ! -perm -200 -exec chmod u+w {} ';' \ - && rm -rf "$(distdir)" \ - || { sleep 5 && rm -rf "$(distdir)"; }; \ - else :; fi -am__post_remove_distdir = $(am__remove_distdir) -DIST_ARCHIVES = $(distdir).tar.gz -GZIP_ENV = --best -DIST_TARGETS = dist-gzip -distuninstallcheck_listfiles = find . -type f -print -am__distuninstallcheck_listfiles = $(distuninstallcheck_listfiles) \ - | sed 's|^\./|$(prefix)/|' | grep -v '$(infodir)/dir$$' -distcleancheck_listfiles = find . -type f -print -ACLOCAL = @ACLOCAL@ -AMTAR = @AMTAR@ -AM_DEFAULT_VERBOSITY = @AM_DEFAULT_VERBOSITY@ -AUTOCONF = @AUTOCONF@ -AUTOHEADER = @AUTOHEADER@ -AUTOMAKE = @AUTOMAKE@ -AWK = @AWK@ -CC = @CC@ -CCDEPMODE = @CCDEPMODE@ -CFLAGS = @CFLAGS@ -CPPFLAGS = @CPPFLAGS@ -CYGPATH_W = @CYGPATH_W@ -DEFS = @DEFS@ -DEPDIR = @DEPDIR@ -ECHO_C = @ECHO_C@ -ECHO_N = @ECHO_N@ -ECHO_T = @ECHO_T@ -EXEEXT = @EXEEXT@ -INSTALL = @INSTALL@ -INSTALL_DATA = @INSTALL_DATA@ -INSTALL_PROGRAM = @INSTALL_PROGRAM@ -INSTALL_SCRIPT = @INSTALL_SCRIPT@ -INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@ -LDFLAGS = @LDFLAGS@ -LIBOBJS = @LIBOBJS@ -LIBS = @LIBS@ -LTLIBOBJS = @LTLIBOBJS@ -MAKEINFO = @MAKEINFO@ -MKDIR_P = @MKDIR_P@ -OBJEXT = @OBJEXT@ -PACKAGE = @PACKAGE@ -PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@ -PACKAGE_NAME = @PACKAGE_NAME@ -PACKAGE_STRING = @PACKAGE_STRING@ -PACKAGE_TARNAME = @PACKAGE_TARNAME@ -PACKAGE_URL = @PACKAGE_URL@ -PACKAGE_VERSION = @PACKAGE_VERSION@ -PATH_SEPARATOR = @PATH_SEPARATOR@ -SET_MAKE = @SET_MAKE@ -SHELL = @SHELL@ -STRIP = @STRIP@ -VERSION = @VERSION@ -abs_builddir = @abs_builddir@ -abs_srcdir = @abs_srcdir@ -abs_top_builddir = @abs_top_builddir@ -abs_top_srcdir = @abs_top_srcdir@ -ac_ct_CC = @ac_ct_CC@ -am__include = @am__include@ -am__leading_dot = @am__leading_dot@ -am__quote = @am__quote@ -am__tar = @am__tar@ -am__untar = @am__untar@ -bindir = @bindir@ -build_alias = @build_alias@ -builddir = @builddir@ -datadir = @datadir@ -datarootdir = @datarootdir@ -docdir = @docdir@ -dvidir = @dvidir@ -exec_prefix = @exec_prefix@ -host_alias = @host_alias@ -htmldir = @htmldir@ -includedir = @includedir@ -infodir = @infodir@ -install_sh = @install_sh@ -libdir = @libdir@ -libexecdir = @libexecdir@ -localedir = @localedir@ -localstatedir = @localstatedir@ -mandir = @mandir@ -mkdir_p = @mkdir_p@ -oldincludedir = @oldincludedir@ -pdfdir = @pdfdir@ -prefix = @prefix@ -program_transform_name = @program_transform_name@ -psdir = @psdir@ -sbindir = @sbindir@ -sharedstatedir = @sharedstatedir@ -srcdir = @srcdir@ -sysconfdir = @sysconfdir@ -target_alias = @target_alias@ -top_build_prefix = @top_build_prefix@ -top_builddir = @top_builddir@ -top_srcdir = @top_srcdir@ -autohello_SOURCES = autohello.c -all: config.h - $(MAKE) $(AM_MAKEFLAGS) all-am - -.SUFFIXES: -.SUFFIXES: .c .o .obj -am--refresh: Makefile - @: -$(srcdir)/Makefile.in: $(srcdir)/Makefile.am $(am__configure_deps) - @for dep in $?; do \ - case '$(am__configure_deps)' in \ - *$$dep*) \ - echo ' cd $(srcdir) && $(AUTOMAKE) --gnu'; \ - $(am__cd) $(srcdir) && $(AUTOMAKE) --gnu \ - && exit 0; \ - exit 1;; \ - esac; \ - done; \ - echo ' cd $(top_srcdir) && $(AUTOMAKE) --gnu Makefile'; \ - $(am__cd) $(top_srcdir) && \ - $(AUTOMAKE) --gnu Makefile -.PRECIOUS: Makefile -Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status - @case '$?' in \ - *config.status*) \ - echo ' $(SHELL) ./config.status'; \ - $(SHELL) ./config.status;; \ - *) \ - echo ' cd $(top_builddir) && $(SHELL) ./config.status $@ $(am__depfiles_maybe)'; \ - cd $(top_builddir) && $(SHELL) ./config.status $@ $(am__depfiles_maybe);; \ - esac; - -$(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES) - $(SHELL) ./config.status --recheck - -$(top_srcdir)/configure: $(am__configure_deps) - $(am__cd) $(srcdir) && $(AUTOCONF) -$(ACLOCAL_M4): $(am__aclocal_m4_deps) - $(am__cd) $(srcdir) && $(ACLOCAL) $(ACLOCAL_AMFLAGS) -$(am__aclocal_m4_deps): - -config.h: stamp-h1 - @test -f $@ || rm -f stamp-h1 - @test -f $@ || $(MAKE) $(AM_MAKEFLAGS) stamp-h1 - -stamp-h1: $(srcdir)/config.h.in $(top_builddir)/config.status - @rm -f stamp-h1 - cd $(top_builddir) && $(SHELL) ./config.status config.h -$(srcdir)/config.h.in: $(am__configure_deps) - ($(am__cd) $(top_srcdir) && $(AUTOHEADER)) - rm -f stamp-h1 - touch $@ - -distclean-hdr: - -rm -f config.h stamp-h1 -install-binPROGRAMS: $(bin_PROGRAMS) - @$(NORMAL_INSTALL) - @list='$(bin_PROGRAMS)'; test -n "$(bindir)" || list=; \ - if test -n "$$list"; then \ - echo " $(MKDIR_P) '$(DESTDIR)$(bindir)'"; \ - $(MKDIR_P) "$(DESTDIR)$(bindir)" || exit 1; \ - fi; \ - for p in $$list; do echo "$$p $$p"; done | \ - sed 's/$(EXEEXT)$$//' | \ - while read p p1; do if test -f $$p \ - ; then echo "$$p"; echo "$$p"; else :; fi; \ - done | \ - sed -e 'p;s,.*/,,;n;h' \ - -e 's|.*|.|' \ - -e 'p;x;s,.*/,,;s/$(EXEEXT)$$//;$(transform);s/$$/$(EXEEXT)/' | \ - sed 'N;N;N;s,\n, ,g' | \ - $(AWK) 'BEGIN { files["."] = ""; dirs["."] = 1 } \ - { d=$$3; if (dirs[d] != 1) { print "d", d; dirs[d] = 1 } \ - if ($$2 == $$4) files[d] = files[d] " " $$1; \ - else { print "f", $$3 "/" $$4, $$1; } } \ - END { for (d in files) print "f", d, files[d] }' | \ - while read type dir files; do \ - if test "$$dir" = .; then dir=; else dir=/$$dir; fi; \ - test -z "$$files" || { \ - echo " $(INSTALL_PROGRAM_ENV) $(INSTALL_PROGRAM) $$files '$(DESTDIR)$(bindir)$$dir'"; \ - $(INSTALL_PROGRAM_ENV) $(INSTALL_PROGRAM) $$files "$(DESTDIR)$(bindir)$$dir" || exit $$?; \ - } \ - ; done - -uninstall-binPROGRAMS: - @$(NORMAL_UNINSTALL) - @list='$(bin_PROGRAMS)'; test -n "$(bindir)" || list=; \ - files=`for p in $$list; do echo "$$p"; done | \ - sed -e 'h;s,^.*/,,;s/$(EXEEXT)$$//;$(transform)' \ - -e 's/$$/$(EXEEXT)/' \ - `; \ - test -n "$$list" || exit 0; \ - echo " ( cd '$(DESTDIR)$(bindir)' && rm -f" $$files ")"; \ - cd "$(DESTDIR)$(bindir)" && rm -f $$files - -clean-binPROGRAMS: - -test -z "$(bin_PROGRAMS)" || rm -f $(bin_PROGRAMS) - -autohello$(EXEEXT): $(autohello_OBJECTS) $(autohello_DEPENDENCIES) $(EXTRA_autohello_DEPENDENCIES) - @rm -f autohello$(EXEEXT) - $(AM_V_CCLD)$(LINK) $(autohello_OBJECTS) $(autohello_LDADD) $(LIBS) - -mostlyclean-compile: - -rm -f *.$(OBJEXT) - -distclean-compile: - -rm -f *.tab.c - -@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/autohello.Po@am__quote@ - -.c.o: -@am__fastdepCC_TRUE@ $(AM_V_CC)$(COMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ $< -@am__fastdepCC_TRUE@ $(AM_V_at)$(am__mv) $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po -@AMDEP_TRUE@@am__fastdepCC_FALSE@ $(AM_V_CC)source='$<' object='$@' libtool=no @AMDEPBACKSLASH@ -@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@ -@am__fastdepCC_FALSE@ $(AM_V_CC@am__nodep@)$(COMPILE) -c -o $@ $< - -.c.obj: -@am__fastdepCC_TRUE@ $(AM_V_CC)$(COMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ `$(CYGPATH_W) '$<'` -@am__fastdepCC_TRUE@ $(AM_V_at)$(am__mv) $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po -@AMDEP_TRUE@@am__fastdepCC_FALSE@ $(AM_V_CC)source='$<' object='$@' libtool=no @AMDEPBACKSLASH@ -@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@ -@am__fastdepCC_FALSE@ $(AM_V_CC@am__nodep@)$(COMPILE) -c -o $@ `$(CYGPATH_W) '$<'` - -ID: $(am__tagged_files) - $(am__define_uniq_tagged_files); mkid -fID $$unique -tags: tags-am -TAGS: tags - -tags-am: $(TAGS_DEPENDENCIES) $(am__tagged_files) - set x; \ - here=`pwd`; \ - $(am__define_uniq_tagged_files); \ - shift; \ - if test -z "$(ETAGS_ARGS)$$*$$unique"; then :; else \ - test -n "$$unique" || unique=$$empty_fix; \ - if test $$# -gt 0; then \ - $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \ - "$$@" $$unique; \ - else \ - $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \ - $$unique; \ - fi; \ - fi -ctags: ctags-am - -CTAGS: ctags -ctags-am: $(TAGS_DEPENDENCIES) $(am__tagged_files) - $(am__define_uniq_tagged_files); \ - test -z "$(CTAGS_ARGS)$$unique" \ - || $(CTAGS) $(CTAGSFLAGS) $(AM_CTAGSFLAGS) $(CTAGS_ARGS) \ - $$unique - -GTAGS: - here=`$(am__cd) $(top_builddir) && pwd` \ - && $(am__cd) $(top_srcdir) \ - && gtags -i $(GTAGS_ARGS) "$$here" -cscope: cscope.files - test ! -s cscope.files \ - || $(CSCOPE) -b -q $(AM_CSCOPEFLAGS) $(CSCOPEFLAGS) -i cscope.files $(CSCOPE_ARGS) -clean-cscope: - -rm -f cscope.files -cscope.files: clean-cscope cscopelist -cscopelist: cscopelist-am - -cscopelist-am: $(am__tagged_files) - list='$(am__tagged_files)'; \ - case "$(srcdir)" in \ - [\\/]* | ?:[\\/]*) sdir="$(srcdir)" ;; \ - *) sdir=$(subdir)/$(srcdir) ;; \ - esac; \ - for i in $$list; do \ - if test -f "$$i"; then \ - echo "$(subdir)/$$i"; \ - else \ - echo "$$sdir/$$i"; \ - fi; \ - done >> $(top_builddir)/cscope.files - -distclean-tags: - -rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags - -rm -f cscope.out cscope.in.out cscope.po.out cscope.files - -distdir: $(DISTFILES) - $(am__remove_distdir) - test -d "$(distdir)" || mkdir "$(distdir)" - @srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \ - topsrcdirstrip=`echo "$(top_srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \ - list='$(DISTFILES)'; \ - dist_files=`for file in $$list; do echo $$file; done | \ - sed -e "s|^$$srcdirstrip/||;t" \ - -e "s|^$$topsrcdirstrip/|$(top_builddir)/|;t"`; \ - case $$dist_files in \ - */*) $(MKDIR_P) `echo "$$dist_files" | \ - sed '/\//!d;s|^|$(distdir)/|;s,/[^/]*$$,,' | \ - sort -u` ;; \ - esac; \ - for file in $$dist_files; do \ - if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \ - if test -d $$d/$$file; then \ - dir=`echo "/$$file" | sed -e 's,/[^/]*$$,,'`; \ - if test -d "$(distdir)/$$file"; then \ - find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \ - fi; \ - if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \ - cp -fpR $(srcdir)/$$file "$(distdir)$$dir" || exit 1; \ - find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \ - fi; \ - cp -fpR $$d/$$file "$(distdir)$$dir" || exit 1; \ - else \ - test -f "$(distdir)/$$file" \ - || cp -p $$d/$$file "$(distdir)/$$file" \ - || exit 1; \ - fi; \ - done - -test -n "$(am__skip_mode_fix)" \ - || find "$(distdir)" -type d ! -perm -755 \ - -exec chmod u+rwx,go+rx {} \; -o \ - ! -type d ! -perm -444 -links 1 -exec chmod a+r {} \; -o \ - ! -type d ! -perm -400 -exec chmod a+r {} \; -o \ - ! -type d ! -perm -444 -exec $(install_sh) -c -m a+r {} {} \; \ - || chmod -R a+r "$(distdir)" -dist-gzip: distdir - tardir=$(distdir) && $(am__tar) | GZIP=$(GZIP_ENV) gzip -c >$(distdir).tar.gz - $(am__post_remove_distdir) - -dist-bzip2: distdir - tardir=$(distdir) && $(am__tar) | BZIP2=$${BZIP2--9} bzip2 -c >$(distdir).tar.bz2 - $(am__post_remove_distdir) - -dist-lzip: distdir - tardir=$(distdir) && $(am__tar) | lzip -c $${LZIP_OPT--9} >$(distdir).tar.lz - $(am__post_remove_distdir) - -dist-xz: distdir - tardir=$(distdir) && $(am__tar) | XZ_OPT=$${XZ_OPT--e} xz -c >$(distdir).tar.xz - $(am__post_remove_distdir) - -dist-tarZ: distdir - @echo WARNING: "Support for shar distribution archives is" \ - "deprecated." >&2 - @echo WARNING: "It will be removed altogether in Automake 2.0" >&2 - tardir=$(distdir) && $(am__tar) | compress -c >$(distdir).tar.Z - $(am__post_remove_distdir) - -dist-shar: distdir - @echo WARNING: "Support for distribution archives compressed with" \ - "legacy program 'compress' is deprecated." >&2 - @echo WARNING: "It will be removed altogether in Automake 2.0" >&2 - shar $(distdir) | GZIP=$(GZIP_ENV) gzip -c >$(distdir).shar.gz - $(am__post_remove_distdir) - -dist-zip: distdir - -rm -f $(distdir).zip - zip -rq $(distdir).zip $(distdir) - $(am__post_remove_distdir) - -dist dist-all: - $(MAKE) $(AM_MAKEFLAGS) $(DIST_TARGETS) am__post_remove_distdir='@:' - $(am__post_remove_distdir) - -# This target untars the dist file and tries a VPATH configuration. Then -# it guarantees that the distribution is self-contained by making another -# tarfile. -distcheck: dist - case '$(DIST_ARCHIVES)' in \ - *.tar.gz*) \ - GZIP=$(GZIP_ENV) gzip -dc $(distdir).tar.gz | $(am__untar) ;;\ - *.tar.bz2*) \ - bzip2 -dc $(distdir).tar.bz2 | $(am__untar) ;;\ - *.tar.lz*) \ - lzip -dc $(distdir).tar.lz | $(am__untar) ;;\ - *.tar.xz*) \ - xz -dc $(distdir).tar.xz | $(am__untar) ;;\ - *.tar.Z*) \ - uncompress -c $(distdir).tar.Z | $(am__untar) ;;\ - *.shar.gz*) \ - GZIP=$(GZIP_ENV) gzip -dc $(distdir).shar.gz | unshar ;;\ - *.zip*) \ - unzip $(distdir).zip ;;\ - esac - chmod -R a-w $(distdir) - chmod u+w $(distdir) - mkdir $(distdir)/_build $(distdir)/_inst - chmod a-w $(distdir) - test -d $(distdir)/_build || exit 0; \ - dc_install_base=`$(am__cd) $(distdir)/_inst && pwd | sed -e 's,^[^:\\/]:[\\/],/,'` \ - && dc_destdir="$${TMPDIR-/tmp}/am-dc-$$$$/" \ - && am__cwd=`pwd` \ - && $(am__cd) $(distdir)/_build \ - && ../configure \ - $(AM_DISTCHECK_CONFIGURE_FLAGS) \ - $(DISTCHECK_CONFIGURE_FLAGS) \ - --srcdir=.. --prefix="$$dc_install_base" \ - && $(MAKE) $(AM_MAKEFLAGS) \ - && $(MAKE) $(AM_MAKEFLAGS) dvi \ - && $(MAKE) $(AM_MAKEFLAGS) check \ - && $(MAKE) $(AM_MAKEFLAGS) install \ - && $(MAKE) $(AM_MAKEFLAGS) installcheck \ - && $(MAKE) $(AM_MAKEFLAGS) uninstall \ - && $(MAKE) $(AM_MAKEFLAGS) distuninstallcheck_dir="$$dc_install_base" \ - distuninstallcheck \ - && chmod -R a-w "$$dc_install_base" \ - && ({ \ - (cd ../.. && umask 077 && mkdir "$$dc_destdir") \ - && $(MAKE) $(AM_MAKEFLAGS) DESTDIR="$$dc_destdir" install \ - && $(MAKE) $(AM_MAKEFLAGS) DESTDIR="$$dc_destdir" uninstall \ - && $(MAKE) $(AM_MAKEFLAGS) DESTDIR="$$dc_destdir" \ - distuninstallcheck_dir="$$dc_destdir" distuninstallcheck; \ - } || { rm -rf "$$dc_destdir"; exit 1; }) \ - && rm -rf "$$dc_destdir" \ - && $(MAKE) $(AM_MAKEFLAGS) dist \ - && rm -rf $(DIST_ARCHIVES) \ - && $(MAKE) $(AM_MAKEFLAGS) distcleancheck \ - && cd "$$am__cwd" \ - || exit 1 - $(am__post_remove_distdir) - @(echo "$(distdir) archives ready for distribution: "; \ - list='$(DIST_ARCHIVES)'; for i in $$list; do echo $$i; done) | \ - sed -e 1h -e 1s/./=/g -e 1p -e 1x -e '$$p' -e '$$x' -distuninstallcheck: - @test -n '$(distuninstallcheck_dir)' || { \ - echo 'ERROR: trying to run $@ with an empty' \ - '$$(distuninstallcheck_dir)' >&2; \ - exit 1; \ - }; \ - $(am__cd) '$(distuninstallcheck_dir)' || { \ - echo 'ERROR: cannot chdir into $(distuninstallcheck_dir)' >&2; \ - exit 1; \ - }; \ - test `$(am__distuninstallcheck_listfiles) | wc -l` -eq 0 \ - || { echo "ERROR: files left after uninstall:" ; \ - if test -n "$(DESTDIR)"; then \ - echo " (check DESTDIR support)"; \ - fi ; \ - $(distuninstallcheck_listfiles) ; \ - exit 1; } >&2 -distcleancheck: distclean - @if test '$(srcdir)' = . ; then \ - echo "ERROR: distcleancheck can only run from a VPATH build" ; \ - exit 1 ; \ - fi - @test `$(distcleancheck_listfiles) | wc -l` -eq 0 \ - || { echo "ERROR: files left in build directory after distclean:" ; \ - $(distcleancheck_listfiles) ; \ - exit 1; } >&2 -check-am: all-am -check: check-am -all-am: Makefile $(PROGRAMS) config.h -installdirs: - for dir in "$(DESTDIR)$(bindir)"; do \ - test -z "$$dir" || $(MKDIR_P) "$$dir"; \ - done -install: install-am -install-exec: install-exec-am -install-data: install-data-am -uninstall: uninstall-am - -install-am: all-am - @$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am - -installcheck: installcheck-am -install-strip: - if test -z '$(STRIP)'; then \ - $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \ - install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \ - install; \ - else \ - $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \ - install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \ - "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'" install; \ - fi -mostlyclean-generic: - -clean-generic: - -distclean-generic: - -test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES) - -test . = "$(srcdir)" || test -z "$(CONFIG_CLEAN_VPATH_FILES)" || rm -f $(CONFIG_CLEAN_VPATH_FILES) - -maintainer-clean-generic: - @echo "This command is intended for maintainers to use" - @echo "it deletes files that may require special tools to rebuild." -clean: clean-am - -clean-am: clean-binPROGRAMS clean-generic mostlyclean-am - -distclean: distclean-am - -rm -f $(am__CONFIG_DISTCLEAN_FILES) - -rm -rf ./$(DEPDIR) - -rm -f Makefile -distclean-am: clean-am distclean-compile distclean-generic \ - distclean-hdr distclean-tags - -dvi: dvi-am - -dvi-am: - -html: html-am - -html-am: - -info: info-am - -info-am: - -install-data-am: - -install-dvi: install-dvi-am - -install-dvi-am: - -install-exec-am: install-binPROGRAMS - -install-html: install-html-am - -install-html-am: - -install-info: install-info-am - -install-info-am: - -install-man: - -install-pdf: install-pdf-am - -install-pdf-am: - -install-ps: install-ps-am - -install-ps-am: - -installcheck-am: - -maintainer-clean: maintainer-clean-am - -rm -f $(am__CONFIG_DISTCLEAN_FILES) - -rm -rf $(top_srcdir)/autom4te.cache - -rm -rf ./$(DEPDIR) - -rm -f Makefile -maintainer-clean-am: distclean-am maintainer-clean-generic - -mostlyclean: mostlyclean-am - -mostlyclean-am: mostlyclean-compile mostlyclean-generic - -pdf: pdf-am - -pdf-am: - -ps: ps-am - -ps-am: - -uninstall-am: uninstall-binPROGRAMS - -.MAKE: all install-am install-strip - -.PHONY: CTAGS GTAGS TAGS all all-am am--refresh check check-am clean \ - clean-binPROGRAMS clean-cscope clean-generic cscope \ - cscopelist-am ctags ctags-am dist dist-all dist-bzip2 \ - dist-gzip dist-lzip dist-shar dist-tarZ dist-xz dist-zip \ - distcheck distclean distclean-compile distclean-generic \ - distclean-hdr distclean-tags distcleancheck distdir \ - distuninstallcheck dvi dvi-am html html-am info info-am \ - install install-am install-binPROGRAMS install-data \ - install-data-am install-dvi install-dvi-am install-exec \ - install-exec-am install-html install-html-am install-info \ - install-info-am install-man install-pdf install-pdf-am \ - install-ps install-ps-am install-strip installcheck \ - installcheck-am installdirs maintainer-clean \ - maintainer-clean-generic mostlyclean mostlyclean-compile \ - mostlyclean-generic pdf pdf-am ps ps-am tags tags-am uninstall \ - uninstall-am uninstall-binPROGRAMS - - -# Tell versions [3.59,3.63) of GNU make to not export all variables. -# Otherwise a system limit (for SysV at least) may be exceeded. -.NOEXPORT: diff --git a/distribution/yocto-advanced/poky/meta-mini/recipes-hello/autohello/files/autohello/NEWS b/distribution/yocto-advanced/poky/meta-mini/recipes-hello/autohello/files/autohello/NEWS deleted file mode 100644 index e69de29..0000000 diff --git a/distribution/yocto-advanced/poky/meta-mini/recipes-hello/autohello/files/autohello/README b/distribution/yocto-advanced/poky/meta-mini/recipes-hello/autohello/files/autohello/README deleted file mode 100644 index e69de29..0000000 diff --git a/distribution/yocto-advanced/poky/meta-mini/recipes-hello/autohello/files/autohello/aclocal.m4 b/distribution/yocto-advanced/poky/meta-mini/recipes-hello/autohello/files/autohello/aclocal.m4 deleted file mode 100644 index f79440d..0000000 --- a/distribution/yocto-advanced/poky/meta-mini/recipes-hello/autohello/files/autohello/aclocal.m4 +++ /dev/null @@ -1,1150 +0,0 @@ -# generated automatically by aclocal 1.14.1 -*- Autoconf -*- - -# Copyright (C) 1996-2013 Free Software Foundation, Inc. - -# This file is free software; the Free Software Foundation -# gives unlimited permission to copy and/or distribute it, -# with or without modifications, as long as this notice is preserved. - -# This program is distributed in the hope that it will be useful, -# but WITHOUT ANY WARRANTY, to the extent permitted by law; without -# even the implied warranty of MERCHANTABILITY or FITNESS FOR A -# PARTICULAR PURPOSE. - -m4_ifndef([AC_CONFIG_MACRO_DIRS], [m4_defun([_AM_CONFIG_MACRO_DIRS], [])m4_defun([AC_CONFIG_MACRO_DIRS], [_AM_CONFIG_MACRO_DIRS($@)])]) -m4_ifndef([AC_AUTOCONF_VERSION], - [m4_copy([m4_PACKAGE_VERSION], [AC_AUTOCONF_VERSION])])dnl -m4_if(m4_defn([AC_AUTOCONF_VERSION]), [2.69],, -[m4_warning([this file was generated for autoconf 2.69. -You have another version of autoconf. It may work, but is not guaranteed to. -If you have problems, you may need to regenerate the build system entirely. -To do so, use the procedure documented by the package, typically 'autoreconf'.])]) - -# Copyright (C) 2002-2013 Free Software Foundation, Inc. -# -# This file is free software; the Free Software Foundation -# gives unlimited permission to copy and/or distribute it, -# with or without modifications, as long as this notice is preserved. - -# AM_AUTOMAKE_VERSION(VERSION) -# ---------------------------- -# Automake X.Y traces this macro to ensure aclocal.m4 has been -# generated from the m4 files accompanying Automake X.Y. -# (This private macro should not be called outside this file.) -AC_DEFUN([AM_AUTOMAKE_VERSION], -[am__api_version='1.14' -dnl Some users find AM_AUTOMAKE_VERSION and mistake it for a way to -dnl require some minimum version. Point them to the right macro. -m4_if([$1], [1.14.1], [], - [AC_FATAL([Do not call $0, use AM_INIT_AUTOMAKE([$1]).])])dnl -]) - -# _AM_AUTOCONF_VERSION(VERSION) -# ----------------------------- -# aclocal traces this macro to find the Autoconf version. -# This is a private macro too. Using m4_define simplifies -# the logic in aclocal, which can simply ignore this definition. -m4_define([_AM_AUTOCONF_VERSION], []) - -# AM_SET_CURRENT_AUTOMAKE_VERSION -# ------------------------------- -# Call AM_AUTOMAKE_VERSION and AM_AUTOMAKE_VERSION so they can be traced. -# This function is AC_REQUIREd by AM_INIT_AUTOMAKE. -AC_DEFUN([AM_SET_CURRENT_AUTOMAKE_VERSION], -[AM_AUTOMAKE_VERSION([1.14.1])dnl -m4_ifndef([AC_AUTOCONF_VERSION], - [m4_copy([m4_PACKAGE_VERSION], [AC_AUTOCONF_VERSION])])dnl -_AM_AUTOCONF_VERSION(m4_defn([AC_AUTOCONF_VERSION]))]) - -# AM_AUX_DIR_EXPAND -*- Autoconf -*- - -# Copyright (C) 2001-2013 Free Software Foundation, Inc. -# -# This file is free software; the Free Software Foundation -# gives unlimited permission to copy and/or distribute it, -# with or without modifications, as long as this notice is preserved. - -# For projects using AC_CONFIG_AUX_DIR([foo]), Autoconf sets -# $ac_aux_dir to '$srcdir/foo'. In other projects, it is set to -# '$srcdir', '$srcdir/..', or '$srcdir/../..'. -# -# Of course, Automake must honor this variable whenever it calls a -# tool from the auxiliary directory. The problem is that $srcdir (and -# therefore $ac_aux_dir as well) can be either absolute or relative, -# depending on how configure is run. This is pretty annoying, since -# it makes $ac_aux_dir quite unusable in subdirectories: in the top -# source directory, any form will work fine, but in subdirectories a -# relative path needs to be adjusted first. -# -# $ac_aux_dir/missing -# fails when called from a subdirectory if $ac_aux_dir is relative -# $top_srcdir/$ac_aux_dir/missing -# fails if $ac_aux_dir is absolute, -# fails when called from a subdirectory in a VPATH build with -# a relative $ac_aux_dir -# -# The reason of the latter failure is that $top_srcdir and $ac_aux_dir -# are both prefixed by $srcdir. In an in-source build this is usually -# harmless because $srcdir is '.', but things will broke when you -# start a VPATH build or use an absolute $srcdir. -# -# So we could use something similar to $top_srcdir/$ac_aux_dir/missing, -# iff we strip the leading $srcdir from $ac_aux_dir. That would be: -# am_aux_dir='\$(top_srcdir)/'`expr "$ac_aux_dir" : "$srcdir//*\(.*\)"` -# and then we would define $MISSING as -# MISSING="\${SHELL} $am_aux_dir/missing" -# This will work as long as MISSING is not called from configure, because -# unfortunately $(top_srcdir) has no meaning in configure. -# However there are other variables, like CC, which are often used in -# configure, and could therefore not use this "fixed" $ac_aux_dir. -# -# Another solution, used here, is to always expand $ac_aux_dir to an -# absolute PATH. The drawback is that using absolute paths prevent a -# configured tree to be moved without reconfiguration. - -AC_DEFUN([AM_AUX_DIR_EXPAND], -[dnl Rely on autoconf to set up CDPATH properly. -AC_PREREQ([2.50])dnl -# expand $ac_aux_dir to an absolute path -am_aux_dir=`cd $ac_aux_dir && pwd` -]) - -# AM_CONDITIONAL -*- Autoconf -*- - -# Copyright (C) 1997-2013 Free Software Foundation, Inc. -# -# This file is free software; the Free Software Foundation -# gives unlimited permission to copy and/or distribute it, -# with or without modifications, as long as this notice is preserved. - -# AM_CONDITIONAL(NAME, SHELL-CONDITION) -# ------------------------------------- -# Define a conditional. -AC_DEFUN([AM_CONDITIONAL], -[AC_PREREQ([2.52])dnl - m4_if([$1], [TRUE], [AC_FATAL([$0: invalid condition: $1])], - [$1], [FALSE], [AC_FATAL([$0: invalid condition: $1])])dnl -AC_SUBST([$1_TRUE])dnl -AC_SUBST([$1_FALSE])dnl -_AM_SUBST_NOTMAKE([$1_TRUE])dnl -_AM_SUBST_NOTMAKE([$1_FALSE])dnl -m4_define([_AM_COND_VALUE_$1], [$2])dnl -if $2; then - $1_TRUE= - $1_FALSE='#' -else - $1_TRUE='#' - $1_FALSE= -fi -AC_CONFIG_COMMANDS_PRE( -[if test -z "${$1_TRUE}" && test -z "${$1_FALSE}"; then - AC_MSG_ERROR([[conditional "$1" was never defined. -Usually this means the macro was only invoked conditionally.]]) -fi])]) - -# Copyright (C) 1999-2013 Free Software Foundation, Inc. -# -# This file is free software; the Free Software Foundation -# gives unlimited permission to copy and/or distribute it, -# with or without modifications, as long as this notice is preserved. - - -# There are a few dirty hacks below to avoid letting 'AC_PROG_CC' be -# written in clear, in which case automake, when reading aclocal.m4, -# will think it sees a *use*, and therefore will trigger all it's -# C support machinery. Also note that it means that autoscan, seeing -# CC etc. in the Makefile, will ask for an AC_PROG_CC use... - - -# _AM_DEPENDENCIES(NAME) -# ---------------------- -# See how the compiler implements dependency checking. -# NAME is "CC", "CXX", "OBJC", "OBJCXX", "UPC", or "GJC". -# We try a few techniques and use that to set a single cache variable. -# -# We don't AC_REQUIRE the corresponding AC_PROG_CC since the latter was -# modified to invoke _AM_DEPENDENCIES(CC); we would have a circular -# dependency, and given that the user is not expected to run this macro, -# just rely on AC_PROG_CC. -AC_DEFUN([_AM_DEPENDENCIES], -[AC_REQUIRE([AM_SET_DEPDIR])dnl -AC_REQUIRE([AM_OUTPUT_DEPENDENCY_COMMANDS])dnl -AC_REQUIRE([AM_MAKE_INCLUDE])dnl -AC_REQUIRE([AM_DEP_TRACK])dnl - -m4_if([$1], [CC], [depcc="$CC" am_compiler_list=], - [$1], [CXX], [depcc="$CXX" am_compiler_list=], - [$1], [OBJC], [depcc="$OBJC" am_compiler_list='gcc3 gcc'], - [$1], [OBJCXX], [depcc="$OBJCXX" am_compiler_list='gcc3 gcc'], - [$1], [UPC], [depcc="$UPC" am_compiler_list=], - [$1], [GCJ], [depcc="$GCJ" am_compiler_list='gcc3 gcc'], - [depcc="$$1" am_compiler_list=]) - -AC_CACHE_CHECK([dependency style of $depcc], - [am_cv_$1_dependencies_compiler_type], -[if test -z "$AMDEP_TRUE" && test -f "$am_depcomp"; then - # We make a subdir and do the tests there. Otherwise we can end up - # making bogus files that we don't know about and never remove. For - # instance it was reported that on HP-UX the gcc test will end up - # making a dummy file named 'D' -- because '-MD' means "put the output - # in D". - rm -rf conftest.dir - mkdir conftest.dir - # Copy depcomp to subdir because otherwise we won't find it if we're - # using a relative directory. - cp "$am_depcomp" conftest.dir - cd conftest.dir - # We will build objects and dependencies in a subdirectory because - # it helps to detect inapplicable dependency modes. For instance - # both Tru64's cc and ICC support -MD to output dependencies as a - # side effect of compilation, but ICC will put the dependencies in - # the current directory while Tru64 will put them in the object - # directory. - mkdir sub - - am_cv_$1_dependencies_compiler_type=none - if test "$am_compiler_list" = ""; then - am_compiler_list=`sed -n ['s/^#*\([a-zA-Z0-9]*\))$/\1/p'] < ./depcomp` - fi - am__universal=false - m4_case([$1], [CC], - [case " $depcc " in #( - *\ -arch\ *\ -arch\ *) am__universal=true ;; - esac], - [CXX], - [case " $depcc " in #( - *\ -arch\ *\ -arch\ *) am__universal=true ;; - esac]) - - for depmode in $am_compiler_list; do - # Setup a source with many dependencies, because some compilers - # like to wrap large dependency lists on column 80 (with \), and - # we should not choose a depcomp mode which is confused by this. - # - # We need to recreate these files for each test, as the compiler may - # overwrite some of them when testing with obscure command lines. - # This happens at least with the AIX C compiler. - : > sub/conftest.c - for i in 1 2 3 4 5 6; do - echo '#include "conftst'$i'.h"' >> sub/conftest.c - # Using ": > sub/conftst$i.h" creates only sub/conftst1.h with - # Solaris 10 /bin/sh. - echo '/* dummy */' > sub/conftst$i.h - done - echo "${am__include} ${am__quote}sub/conftest.Po${am__quote}" > confmf - - # We check with '-c' and '-o' for the sake of the "dashmstdout" - # mode. It turns out that the SunPro C++ compiler does not properly - # handle '-M -o', and we need to detect this. Also, some Intel - # versions had trouble with output in subdirs. - am__obj=sub/conftest.${OBJEXT-o} - am__minus_obj="-o $am__obj" - case $depmode in - gcc) - # This depmode causes a compiler race in universal mode. - test "$am__universal" = false || continue - ;; - nosideeffect) - # After this tag, mechanisms are not by side-effect, so they'll - # only be used when explicitly requested. - if test "x$enable_dependency_tracking" = xyes; then - continue - else - break - fi - ;; - msvc7 | msvc7msys | msvisualcpp | msvcmsys) - # This compiler won't grok '-c -o', but also, the minuso test has - # not run yet. These depmodes are late enough in the game, and - # so weak that their functioning should not be impacted. - am__obj=conftest.${OBJEXT-o} - am__minus_obj= - ;; - none) break ;; - esac - if depmode=$depmode \ - source=sub/conftest.c object=$am__obj \ - depfile=sub/conftest.Po tmpdepfile=sub/conftest.TPo \ - $SHELL ./depcomp $depcc -c $am__minus_obj sub/conftest.c \ - >/dev/null 2>conftest.err && - grep sub/conftst1.h sub/conftest.Po > /dev/null 2>&1 && - grep sub/conftst6.h sub/conftest.Po > /dev/null 2>&1 && - grep $am__obj sub/conftest.Po > /dev/null 2>&1 && - ${MAKE-make} -s -f confmf > /dev/null 2>&1; then - # icc doesn't choke on unknown options, it will just issue warnings - # or remarks (even with -Werror). So we grep stderr for any message - # that says an option was ignored or not supported. - # When given -MP, icc 7.0 and 7.1 complain thusly: - # icc: Command line warning: ignoring option '-M'; no argument required - # The diagnosis changed in icc 8.0: - # icc: Command line remark: option '-MP' not supported - if (grep 'ignoring option' conftest.err || - grep 'not supported' conftest.err) >/dev/null 2>&1; then :; else - am_cv_$1_dependencies_compiler_type=$depmode - break - fi - fi - done - - cd .. - rm -rf conftest.dir -else - am_cv_$1_dependencies_compiler_type=none -fi -]) -AC_SUBST([$1DEPMODE], [depmode=$am_cv_$1_dependencies_compiler_type]) -AM_CONDITIONAL([am__fastdep$1], [ - test "x$enable_dependency_tracking" != xno \ - && test "$am_cv_$1_dependencies_compiler_type" = gcc3]) -]) - - -# AM_SET_DEPDIR -# ------------- -# Choose a directory name for dependency files. -# This macro is AC_REQUIREd in _AM_DEPENDENCIES. -AC_DEFUN([AM_SET_DEPDIR], -[AC_REQUIRE([AM_SET_LEADING_DOT])dnl -AC_SUBST([DEPDIR], ["${am__leading_dot}deps"])dnl -]) - - -# AM_DEP_TRACK -# ------------ -AC_DEFUN([AM_DEP_TRACK], -[AC_ARG_ENABLE([dependency-tracking], [dnl -AS_HELP_STRING( - [--enable-dependency-tracking], - [do not reject slow dependency extractors]) -AS_HELP_STRING( - [--disable-dependency-tracking], - [speeds up one-time build])]) -if test "x$enable_dependency_tracking" != xno; then - am_depcomp="$ac_aux_dir/depcomp" - AMDEPBACKSLASH='\' - am__nodep='_no' -fi -AM_CONDITIONAL([AMDEP], [test "x$enable_dependency_tracking" != xno]) -AC_SUBST([AMDEPBACKSLASH])dnl -_AM_SUBST_NOTMAKE([AMDEPBACKSLASH])dnl -AC_SUBST([am__nodep])dnl -_AM_SUBST_NOTMAKE([am__nodep])dnl -]) - -# Generate code to set up dependency tracking. -*- Autoconf -*- - -# Copyright (C) 1999-2013 Free Software Foundation, Inc. -# -# This file is free software; the Free Software Foundation -# gives unlimited permission to copy and/or distribute it, -# with or without modifications, as long as this notice is preserved. - - -# _AM_OUTPUT_DEPENDENCY_COMMANDS -# ------------------------------ -AC_DEFUN([_AM_OUTPUT_DEPENDENCY_COMMANDS], -[{ - # Older Autoconf quotes --file arguments for eval, but not when files - # are listed without --file. Let's play safe and only enable the eval - # if we detect the quoting. - case $CONFIG_FILES in - *\'*) eval set x "$CONFIG_FILES" ;; - *) set x $CONFIG_FILES ;; - esac - shift - for mf - do - # Strip MF so we end up with the name of the file. - mf=`echo "$mf" | sed -e 's/:.*$//'` - # Check whether this is an Automake generated Makefile or not. - # We used to match only the files named 'Makefile.in', but - # some people rename them; so instead we look at the file content. - # Grep'ing the first line is not enough: some people post-process - # each Makefile.in and add a new line on top of each file to say so. - # Grep'ing the whole file is not good either: AIX grep has a line - # limit of 2048, but all sed's we know have understand at least 4000. - if sed -n 's,^#.*generated by automake.*,X,p' "$mf" | grep X >/dev/null 2>&1; then - dirpart=`AS_DIRNAME("$mf")` - else - continue - fi - # Extract the definition of DEPDIR, am__include, and am__quote - # from the Makefile without running 'make'. - DEPDIR=`sed -n 's/^DEPDIR = //p' < "$mf"` - test -z "$DEPDIR" && continue - am__include=`sed -n 's/^am__include = //p' < "$mf"` - test -z "$am__include" && continue - am__quote=`sed -n 's/^am__quote = //p' < "$mf"` - # Find all dependency output files, they are included files with - # $(DEPDIR) in their names. We invoke sed twice because it is the - # simplest approach to changing $(DEPDIR) to its actual value in the - # expansion. - for file in `sed -n " - s/^$am__include $am__quote\(.*(DEPDIR).*\)$am__quote"'$/\1/p' <"$mf" | \ - sed -e 's/\$(DEPDIR)/'"$DEPDIR"'/g'`; do - # Make sure the directory exists. - test -f "$dirpart/$file" && continue - fdir=`AS_DIRNAME(["$file"])` - AS_MKDIR_P([$dirpart/$fdir]) - # echo "creating $dirpart/$file" - echo '# dummy' > "$dirpart/$file" - done - done -} -])# _AM_OUTPUT_DEPENDENCY_COMMANDS - - -# AM_OUTPUT_DEPENDENCY_COMMANDS -# ----------------------------- -# This macro should only be invoked once -- use via AC_REQUIRE. -# -# This code is only required when automatic dependency tracking -# is enabled. FIXME. This creates each '.P' file that we will -# need in order to bootstrap the dependency handling code. -AC_DEFUN([AM_OUTPUT_DEPENDENCY_COMMANDS], -[AC_CONFIG_COMMANDS([depfiles], - [test x"$AMDEP_TRUE" != x"" || _AM_OUTPUT_DEPENDENCY_COMMANDS], - [AMDEP_TRUE="$AMDEP_TRUE" ac_aux_dir="$ac_aux_dir"]) -]) - -# Do all the work for Automake. -*- Autoconf -*- - -# Copyright (C) 1996-2013 Free Software Foundation, Inc. -# -# This file is free software; the Free Software Foundation -# gives unlimited permission to copy and/or distribute it, -# with or without modifications, as long as this notice is preserved. - -# This macro actually does too much. Some checks are only needed if -# your package does certain things. But this isn't really a big deal. - -dnl Redefine AC_PROG_CC to automatically invoke _AM_PROG_CC_C_O. -m4_define([AC_PROG_CC], -m4_defn([AC_PROG_CC]) -[_AM_PROG_CC_C_O -]) - -# AM_INIT_AUTOMAKE(PACKAGE, VERSION, [NO-DEFINE]) -# AM_INIT_AUTOMAKE([OPTIONS]) -# ----------------------------------------------- -# The call with PACKAGE and VERSION arguments is the old style -# call (pre autoconf-2.50), which is being phased out. PACKAGE -# and VERSION should now be passed to AC_INIT and removed from -# the call to AM_INIT_AUTOMAKE. -# We support both call styles for the transition. After -# the next Automake release, Autoconf can make the AC_INIT -# arguments mandatory, and then we can depend on a new Autoconf -# release and drop the old call support. -AC_DEFUN([AM_INIT_AUTOMAKE], -[AC_PREREQ([2.65])dnl -dnl Autoconf wants to disallow AM_ names. We explicitly allow -dnl the ones we care about. -m4_pattern_allow([^AM_[A-Z]+FLAGS$])dnl -AC_REQUIRE([AM_SET_CURRENT_AUTOMAKE_VERSION])dnl -AC_REQUIRE([AC_PROG_INSTALL])dnl -if test "`cd $srcdir && pwd`" != "`pwd`"; then - # Use -I$(srcdir) only when $(srcdir) != ., so that make's output - # is not polluted with repeated "-I." - AC_SUBST([am__isrc], [' -I$(srcdir)'])_AM_SUBST_NOTMAKE([am__isrc])dnl - # test to see if srcdir already configured - if test -f $srcdir/config.status; then - AC_MSG_ERROR([source directory already configured; run "make distclean" there first]) - fi -fi - -# test whether we have cygpath -if test -z "$CYGPATH_W"; then - if (cygpath --version) >/dev/null 2>/dev/null; then - CYGPATH_W='cygpath -w' - else - CYGPATH_W=echo - fi -fi -AC_SUBST([CYGPATH_W]) - -# Define the identity of the package. -dnl Distinguish between old-style and new-style calls. -m4_ifval([$2], -[AC_DIAGNOSE([obsolete], - [$0: two- and three-arguments forms are deprecated.]) -m4_ifval([$3], [_AM_SET_OPTION([no-define])])dnl - AC_SUBST([PACKAGE], [$1])dnl - AC_SUBST([VERSION], [$2])], -[_AM_SET_OPTIONS([$1])dnl -dnl Diagnose old-style AC_INIT with new-style AM_AUTOMAKE_INIT. -m4_if( - m4_ifdef([AC_PACKAGE_NAME], [ok]):m4_ifdef([AC_PACKAGE_VERSION], [ok]), - [ok:ok],, - [m4_fatal([AC_INIT should be called with package and version arguments])])dnl - AC_SUBST([PACKAGE], ['AC_PACKAGE_TARNAME'])dnl - AC_SUBST([VERSION], ['AC_PACKAGE_VERSION'])])dnl - -_AM_IF_OPTION([no-define],, -[AC_DEFINE_UNQUOTED([PACKAGE], ["$PACKAGE"], [Name of package]) - AC_DEFINE_UNQUOTED([VERSION], ["$VERSION"], [Version number of package])])dnl - -# Some tools Automake needs. -AC_REQUIRE([AM_SANITY_CHECK])dnl -AC_REQUIRE([AC_ARG_PROGRAM])dnl -AM_MISSING_PROG([ACLOCAL], [aclocal-${am__api_version}]) -AM_MISSING_PROG([AUTOCONF], [autoconf]) -AM_MISSING_PROG([AUTOMAKE], [automake-${am__api_version}]) -AM_MISSING_PROG([AUTOHEADER], [autoheader]) -AM_MISSING_PROG([MAKEINFO], [makeinfo]) -AC_REQUIRE([AM_PROG_INSTALL_SH])dnl -AC_REQUIRE([AM_PROG_INSTALL_STRIP])dnl -AC_REQUIRE([AC_PROG_MKDIR_P])dnl -# For better backward compatibility. To be removed once Automake 1.9.x -# dies out for good. For more background, see: -# -# -AC_SUBST([mkdir_p], ['$(MKDIR_P)']) -# We need awk for the "check" target. The system "awk" is bad on -# some platforms. -AC_REQUIRE([AC_PROG_AWK])dnl -AC_REQUIRE([AC_PROG_MAKE_SET])dnl -AC_REQUIRE([AM_SET_LEADING_DOT])dnl -_AM_IF_OPTION([tar-ustar], [_AM_PROG_TAR([ustar])], - [_AM_IF_OPTION([tar-pax], [_AM_PROG_TAR([pax])], - [_AM_PROG_TAR([v7])])]) -_AM_IF_OPTION([no-dependencies],, -[AC_PROVIDE_IFELSE([AC_PROG_CC], - [_AM_DEPENDENCIES([CC])], - [m4_define([AC_PROG_CC], - m4_defn([AC_PROG_CC])[_AM_DEPENDENCIES([CC])])])dnl -AC_PROVIDE_IFELSE([AC_PROG_CXX], - [_AM_DEPENDENCIES([CXX])], - [m4_define([AC_PROG_CXX], - m4_defn([AC_PROG_CXX])[_AM_DEPENDENCIES([CXX])])])dnl -AC_PROVIDE_IFELSE([AC_PROG_OBJC], - [_AM_DEPENDENCIES([OBJC])], - [m4_define([AC_PROG_OBJC], - m4_defn([AC_PROG_OBJC])[_AM_DEPENDENCIES([OBJC])])])dnl -AC_PROVIDE_IFELSE([AC_PROG_OBJCXX], - [_AM_DEPENDENCIES([OBJCXX])], - [m4_define([AC_PROG_OBJCXX], - m4_defn([AC_PROG_OBJCXX])[_AM_DEPENDENCIES([OBJCXX])])])dnl -]) -AC_REQUIRE([AM_SILENT_RULES])dnl -dnl The testsuite driver may need to know about EXEEXT, so add the -dnl 'am__EXEEXT' conditional if _AM_COMPILER_EXEEXT was seen. This -dnl macro is hooked onto _AC_COMPILER_EXEEXT early, see below. -AC_CONFIG_COMMANDS_PRE(dnl -[m4_provide_if([_AM_COMPILER_EXEEXT], - [AM_CONDITIONAL([am__EXEEXT], [test -n "$EXEEXT"])])])dnl - -# POSIX will say in a future version that running "rm -f" with no argument -# is OK; and we want to be able to make that assumption in our Makefile -# recipes. So use an aggressive probe to check that the usage we want is -# actually supported "in the wild" to an acceptable degree. -# See automake bug#10828. -# To make any issue more visible, cause the running configure to be aborted -# by default if the 'rm' program in use doesn't match our expectations; the -# user can still override this though. -if rm -f && rm -fr && rm -rf; then : OK; else - cat >&2 <<'END' -Oops! - -Your 'rm' program seems unable to run without file operands specified -on the command line, even when the '-f' option is present. This is contrary -to the behaviour of most rm programs out there, and not conforming with -the upcoming POSIX standard: - -Please tell bug-automake@gnu.org about your system, including the value -of your $PATH and any error possibly output before this message. This -can help us improve future automake versions. - -END - if test x"$ACCEPT_INFERIOR_RM_PROGRAM" = x"yes"; then - echo 'Configuration will proceed anyway, since you have set the' >&2 - echo 'ACCEPT_INFERIOR_RM_PROGRAM variable to "yes"' >&2 - echo >&2 - else - cat >&2 <<'END' -Aborting the configuration process, to ensure you take notice of the issue. - -You can download and install GNU coreutils to get an 'rm' implementation -that behaves properly: . - -If you want to complete the configuration process using your problematic -'rm' anyway, export the environment variable ACCEPT_INFERIOR_RM_PROGRAM -to "yes", and re-run configure. - -END - AC_MSG_ERROR([Your 'rm' program is bad, sorry.]) - fi -fi -]) - -dnl Hook into '_AC_COMPILER_EXEEXT' early to learn its expansion. Do not -dnl add the conditional right here, as _AC_COMPILER_EXEEXT may be further -dnl mangled by Autoconf and run in a shell conditional statement. -m4_define([_AC_COMPILER_EXEEXT], -m4_defn([_AC_COMPILER_EXEEXT])[m4_provide([_AM_COMPILER_EXEEXT])]) - -# When config.status generates a header, we must update the stamp-h file. -# This file resides in the same directory as the config header -# that is generated. The stamp files are numbered to have different names. - -# Autoconf calls _AC_AM_CONFIG_HEADER_HOOK (when defined) in the -# loop where config.status creates the headers, so we can generate -# our stamp files there. -AC_DEFUN([_AC_AM_CONFIG_HEADER_HOOK], -[# Compute $1's index in $config_headers. -_am_arg=$1 -_am_stamp_count=1 -for _am_header in $config_headers :; do - case $_am_header in - $_am_arg | $_am_arg:* ) - break ;; - * ) - _am_stamp_count=`expr $_am_stamp_count + 1` ;; - esac -done -echo "timestamp for $_am_arg" >`AS_DIRNAME(["$_am_arg"])`/stamp-h[]$_am_stamp_count]) - -# Copyright (C) 2001-2013 Free Software Foundation, Inc. -# -# This file is free software; the Free Software Foundation -# gives unlimited permission to copy and/or distribute it, -# with or without modifications, as long as this notice is preserved. - -# AM_PROG_INSTALL_SH -# ------------------ -# Define $install_sh. -AC_DEFUN([AM_PROG_INSTALL_SH], -[AC_REQUIRE([AM_AUX_DIR_EXPAND])dnl -if test x"${install_sh}" != xset; then - case $am_aux_dir in - *\ * | *\ *) - install_sh="\${SHELL} '$am_aux_dir/install-sh'" ;; - *) - install_sh="\${SHELL} $am_aux_dir/install-sh" - esac -fi -AC_SUBST([install_sh])]) - -# Copyright (C) 2003-2013 Free Software Foundation, Inc. -# -# This file is free software; the Free Software Foundation -# gives unlimited permission to copy and/or distribute it, -# with or without modifications, as long as this notice is preserved. - -# Check whether the underlying file-system supports filenames -# with a leading dot. For instance MS-DOS doesn't. -AC_DEFUN([AM_SET_LEADING_DOT], -[rm -rf .tst 2>/dev/null -mkdir .tst 2>/dev/null -if test -d .tst; then - am__leading_dot=. -else - am__leading_dot=_ -fi -rmdir .tst 2>/dev/null -AC_SUBST([am__leading_dot])]) - -# Check to see how 'make' treats includes. -*- Autoconf -*- - -# Copyright (C) 2001-2013 Free Software Foundation, Inc. -# -# This file is free software; the Free Software Foundation -# gives unlimited permission to copy and/or distribute it, -# with or without modifications, as long as this notice is preserved. - -# AM_MAKE_INCLUDE() -# ----------------- -# Check to see how make treats includes. -AC_DEFUN([AM_MAKE_INCLUDE], -[am_make=${MAKE-make} -cat > confinc << 'END' -am__doit: - @echo this is the am__doit target -.PHONY: am__doit -END -# If we don't find an include directive, just comment out the code. -AC_MSG_CHECKING([for style of include used by $am_make]) -am__include="#" -am__quote= -_am_result=none -# First try GNU make style include. -echo "include confinc" > confmf -# Ignore all kinds of additional output from 'make'. -case `$am_make -s -f confmf 2> /dev/null` in #( -*the\ am__doit\ target*) - am__include=include - am__quote= - _am_result=GNU - ;; -esac -# Now try BSD make style include. -if test "$am__include" = "#"; then - echo '.include "confinc"' > confmf - case `$am_make -s -f confmf 2> /dev/null` in #( - *the\ am__doit\ target*) - am__include=.include - am__quote="\"" - _am_result=BSD - ;; - esac -fi -AC_SUBST([am__include]) -AC_SUBST([am__quote]) -AC_MSG_RESULT([$_am_result]) -rm -f confinc confmf -]) - -# Fake the existence of programs that GNU maintainers use. -*- Autoconf -*- - -# Copyright (C) 1997-2013 Free Software Foundation, Inc. -# -# This file is free software; the Free Software Foundation -# gives unlimited permission to copy and/or distribute it, -# with or without modifications, as long as this notice is preserved. - -# AM_MISSING_PROG(NAME, PROGRAM) -# ------------------------------ -AC_DEFUN([AM_MISSING_PROG], -[AC_REQUIRE([AM_MISSING_HAS_RUN]) -$1=${$1-"${am_missing_run}$2"} -AC_SUBST($1)]) - -# AM_MISSING_HAS_RUN -# ------------------ -# Define MISSING if not defined so far and test if it is modern enough. -# If it is, set am_missing_run to use it, otherwise, to nothing. -AC_DEFUN([AM_MISSING_HAS_RUN], -[AC_REQUIRE([AM_AUX_DIR_EXPAND])dnl -AC_REQUIRE_AUX_FILE([missing])dnl -if test x"${MISSING+set}" != xset; then - case $am_aux_dir in - *\ * | *\ *) - MISSING="\${SHELL} \"$am_aux_dir/missing\"" ;; - *) - MISSING="\${SHELL} $am_aux_dir/missing" ;; - esac -fi -# Use eval to expand $SHELL -if eval "$MISSING --is-lightweight"; then - am_missing_run="$MISSING " -else - am_missing_run= - AC_MSG_WARN(['missing' script is too old or missing]) -fi -]) - -# Helper functions for option handling. -*- Autoconf -*- - -# Copyright (C) 2001-2013 Free Software Foundation, Inc. -# -# This file is free software; the Free Software Foundation -# gives unlimited permission to copy and/or distribute it, -# with or without modifications, as long as this notice is preserved. - -# _AM_MANGLE_OPTION(NAME) -# ----------------------- -AC_DEFUN([_AM_MANGLE_OPTION], -[[_AM_OPTION_]m4_bpatsubst($1, [[^a-zA-Z0-9_]], [_])]) - -# _AM_SET_OPTION(NAME) -# -------------------- -# Set option NAME. Presently that only means defining a flag for this option. -AC_DEFUN([_AM_SET_OPTION], -[m4_define(_AM_MANGLE_OPTION([$1]), [1])]) - -# _AM_SET_OPTIONS(OPTIONS) -# ------------------------ -# OPTIONS is a space-separated list of Automake options. -AC_DEFUN([_AM_SET_OPTIONS], -[m4_foreach_w([_AM_Option], [$1], [_AM_SET_OPTION(_AM_Option)])]) - -# _AM_IF_OPTION(OPTION, IF-SET, [IF-NOT-SET]) -# ------------------------------------------- -# Execute IF-SET if OPTION is set, IF-NOT-SET otherwise. -AC_DEFUN([_AM_IF_OPTION], -[m4_ifset(_AM_MANGLE_OPTION([$1]), [$2], [$3])]) - -# Copyright (C) 1999-2013 Free Software Foundation, Inc. -# -# This file is free software; the Free Software Foundation -# gives unlimited permission to copy and/or distribute it, -# with or without modifications, as long as this notice is preserved. - -# _AM_PROG_CC_C_O -# --------------- -# Like AC_PROG_CC_C_O, but changed for automake. We rewrite AC_PROG_CC -# to automatically call this. -AC_DEFUN([_AM_PROG_CC_C_O], -[AC_REQUIRE([AM_AUX_DIR_EXPAND])dnl -AC_REQUIRE_AUX_FILE([compile])dnl -AC_LANG_PUSH([C])dnl -AC_CACHE_CHECK( - [whether $CC understands -c and -o together], - [am_cv_prog_cc_c_o], - [AC_LANG_CONFTEST([AC_LANG_PROGRAM([])]) - # Make sure it works both with $CC and with simple cc. - # Following AC_PROG_CC_C_O, we do the test twice because some - # compilers refuse to overwrite an existing .o file with -o, - # though they will create one. - am_cv_prog_cc_c_o=yes - for am_i in 1 2; do - if AM_RUN_LOG([$CC -c conftest.$ac_ext -o conftest2.$ac_objext]) \ - && test -f conftest2.$ac_objext; then - : OK - else - am_cv_prog_cc_c_o=no - break - fi - done - rm -f core conftest* - unset am_i]) -if test "$am_cv_prog_cc_c_o" != yes; then - # Losing compiler, so override with the script. - # FIXME: It is wrong to rewrite CC. - # But if we don't then we get into trouble of one sort or another. - # A longer-term fix would be to have automake use am__CC in this case, - # and then we could set am__CC="\$(top_srcdir)/compile \$(CC)" - CC="$am_aux_dir/compile $CC" -fi -AC_LANG_POP([C])]) - -# For backward compatibility. -AC_DEFUN_ONCE([AM_PROG_CC_C_O], [AC_REQUIRE([AC_PROG_CC])]) - -# Copyright (C) 2001-2013 Free Software Foundation, Inc. -# -# This file is free software; the Free Software Foundation -# gives unlimited permission to copy and/or distribute it, -# with or without modifications, as long as this notice is preserved. - -# AM_RUN_LOG(COMMAND) -# ------------------- -# Run COMMAND, save the exit status in ac_status, and log it. -# (This has been adapted from Autoconf's _AC_RUN_LOG macro.) -AC_DEFUN([AM_RUN_LOG], -[{ echo "$as_me:$LINENO: $1" >&AS_MESSAGE_LOG_FD - ($1) >&AS_MESSAGE_LOG_FD 2>&AS_MESSAGE_LOG_FD - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&AS_MESSAGE_LOG_FD - (exit $ac_status); }]) - -# Check to make sure that the build environment is sane. -*- Autoconf -*- - -# Copyright (C) 1996-2013 Free Software Foundation, Inc. -# -# This file is free software; the Free Software Foundation -# gives unlimited permission to copy and/or distribute it, -# with or without modifications, as long as this notice is preserved. - -# AM_SANITY_CHECK -# --------------- -AC_DEFUN([AM_SANITY_CHECK], -[AC_MSG_CHECKING([whether build environment is sane]) -# Reject unsafe characters in $srcdir or the absolute working directory -# name. Accept space and tab only in the latter. -am_lf=' -' -case `pwd` in - *[[\\\"\#\$\&\'\`$am_lf]]*) - AC_MSG_ERROR([unsafe absolute working directory name]);; -esac -case $srcdir in - *[[\\\"\#\$\&\'\`$am_lf\ \ ]]*) - AC_MSG_ERROR([unsafe srcdir value: '$srcdir']);; -esac - -# Do 'set' in a subshell so we don't clobber the current shell's -# arguments. Must try -L first in case configure is actually a -# symlink; some systems play weird games with the mod time of symlinks -# (eg FreeBSD returns the mod time of the symlink's containing -# directory). -if ( - am_has_slept=no - for am_try in 1 2; do - echo "timestamp, slept: $am_has_slept" > conftest.file - set X `ls -Lt "$srcdir/configure" conftest.file 2> /dev/null` - if test "$[*]" = "X"; then - # -L didn't work. - set X `ls -t "$srcdir/configure" conftest.file` - fi - if test "$[*]" != "X $srcdir/configure conftest.file" \ - && test "$[*]" != "X conftest.file $srcdir/configure"; then - - # If neither matched, then we have a broken ls. This can happen - # if, for instance, CONFIG_SHELL is bash and it inherits a - # broken ls alias from the environment. This has actually - # happened. Such a system could not be considered "sane". - AC_MSG_ERROR([ls -t appears to fail. Make sure there is not a broken - alias in your environment]) - fi - if test "$[2]" = conftest.file || test $am_try -eq 2; then - break - fi - # Just in case. - sleep 1 - am_has_slept=yes - done - test "$[2]" = conftest.file - ) -then - # Ok. - : -else - AC_MSG_ERROR([newly created file is older than distributed files! -Check your system clock]) -fi -AC_MSG_RESULT([yes]) -# If we didn't sleep, we still need to ensure time stamps of config.status and -# generated files are strictly newer. -am_sleep_pid= -if grep 'slept: no' conftest.file >/dev/null 2>&1; then - ( sleep 1 ) & - am_sleep_pid=$! -fi -AC_CONFIG_COMMANDS_PRE( - [AC_MSG_CHECKING([that generated files are newer than configure]) - if test -n "$am_sleep_pid"; then - # Hide warnings about reused PIDs. - wait $am_sleep_pid 2>/dev/null - fi - AC_MSG_RESULT([done])]) -rm -f conftest.file -]) - -# Copyright (C) 2009-2013 Free Software Foundation, Inc. -# -# This file is free software; the Free Software Foundation -# gives unlimited permission to copy and/or distribute it, -# with or without modifications, as long as this notice is preserved. - -# AM_SILENT_RULES([DEFAULT]) -# -------------------------- -# Enable less verbose build rules; with the default set to DEFAULT -# ("yes" being less verbose, "no" or empty being verbose). -AC_DEFUN([AM_SILENT_RULES], -[AC_ARG_ENABLE([silent-rules], [dnl -AS_HELP_STRING( - [--enable-silent-rules], - [less verbose build output (undo: "make V=1")]) -AS_HELP_STRING( - [--disable-silent-rules], - [verbose build output (undo: "make V=0")])dnl -]) -case $enable_silent_rules in @%:@ ((( - yes) AM_DEFAULT_VERBOSITY=0;; - no) AM_DEFAULT_VERBOSITY=1;; - *) AM_DEFAULT_VERBOSITY=m4_if([$1], [yes], [0], [1]);; -esac -dnl -dnl A few 'make' implementations (e.g., NonStop OS and NextStep) -dnl do not support nested variable expansions. -dnl See automake bug#9928 and bug#10237. -am_make=${MAKE-make} -AC_CACHE_CHECK([whether $am_make supports nested variables], - [am_cv_make_support_nested_variables], - [if AS_ECHO([['TRUE=$(BAR$(V)) -BAR0=false -BAR1=true -V=1 -am__doit: - @$(TRUE) -.PHONY: am__doit']]) | $am_make -f - >/dev/null 2>&1; then - am_cv_make_support_nested_variables=yes -else - am_cv_make_support_nested_variables=no -fi]) -if test $am_cv_make_support_nested_variables = yes; then - dnl Using '$V' instead of '$(V)' breaks IRIX make. - AM_V='$(V)' - AM_DEFAULT_V='$(AM_DEFAULT_VERBOSITY)' -else - AM_V=$AM_DEFAULT_VERBOSITY - AM_DEFAULT_V=$AM_DEFAULT_VERBOSITY -fi -AC_SUBST([AM_V])dnl -AM_SUBST_NOTMAKE([AM_V])dnl -AC_SUBST([AM_DEFAULT_V])dnl -AM_SUBST_NOTMAKE([AM_DEFAULT_V])dnl -AC_SUBST([AM_DEFAULT_VERBOSITY])dnl -AM_BACKSLASH='\' -AC_SUBST([AM_BACKSLASH])dnl -_AM_SUBST_NOTMAKE([AM_BACKSLASH])dnl -]) - -# Copyright (C) 2001-2013 Free Software Foundation, Inc. -# -# This file is free software; the Free Software Foundation -# gives unlimited permission to copy and/or distribute it, -# with or without modifications, as long as this notice is preserved. - -# AM_PROG_INSTALL_STRIP -# --------------------- -# One issue with vendor 'install' (even GNU) is that you can't -# specify the program used to strip binaries. This is especially -# annoying in cross-compiling environments, where the build's strip -# is unlikely to handle the host's binaries. -# Fortunately install-sh will honor a STRIPPROG variable, so we -# always use install-sh in "make install-strip", and initialize -# STRIPPROG with the value of the STRIP variable (set by the user). -AC_DEFUN([AM_PROG_INSTALL_STRIP], -[AC_REQUIRE([AM_PROG_INSTALL_SH])dnl -# Installed binaries are usually stripped using 'strip' when the user -# run "make install-strip". However 'strip' might not be the right -# tool to use in cross-compilation environments, therefore Automake -# will honor the 'STRIP' environment variable to overrule this program. -dnl Don't test for $cross_compiling = yes, because it might be 'maybe'. -if test "$cross_compiling" != no; then - AC_CHECK_TOOL([STRIP], [strip], :) -fi -INSTALL_STRIP_PROGRAM="\$(install_sh) -c -s" -AC_SUBST([INSTALL_STRIP_PROGRAM])]) - -# Copyright (C) 2006-2013 Free Software Foundation, Inc. -# -# This file is free software; the Free Software Foundation -# gives unlimited permission to copy and/or distribute it, -# with or without modifications, as long as this notice is preserved. - -# _AM_SUBST_NOTMAKE(VARIABLE) -# --------------------------- -# Prevent Automake from outputting VARIABLE = @VARIABLE@ in Makefile.in. -# This macro is traced by Automake. -AC_DEFUN([_AM_SUBST_NOTMAKE]) - -# AM_SUBST_NOTMAKE(VARIABLE) -# -------------------------- -# Public sister of _AM_SUBST_NOTMAKE. -AC_DEFUN([AM_SUBST_NOTMAKE], [_AM_SUBST_NOTMAKE($@)]) - -# Check how to create a tarball. -*- Autoconf -*- - -# Copyright (C) 2004-2013 Free Software Foundation, Inc. -# -# This file is free software; the Free Software Foundation -# gives unlimited permission to copy and/or distribute it, -# with or without modifications, as long as this notice is preserved. - -# _AM_PROG_TAR(FORMAT) -# -------------------- -# Check how to create a tarball in format FORMAT. -# FORMAT should be one of 'v7', 'ustar', or 'pax'. -# -# Substitute a variable $(am__tar) that is a command -# writing to stdout a FORMAT-tarball containing the directory -# $tardir. -# tardir=directory && $(am__tar) > result.tar -# -# Substitute a variable $(am__untar) that extract such -# a tarball read from stdin. -# $(am__untar) < result.tar -# -AC_DEFUN([_AM_PROG_TAR], -[# Always define AMTAR for backward compatibility. Yes, it's still used -# in the wild :-( We should find a proper way to deprecate it ... -AC_SUBST([AMTAR], ['$${TAR-tar}']) - -# We'll loop over all known methods to create a tar archive until one works. -_am_tools='gnutar m4_if([$1], [ustar], [plaintar]) pax cpio none' - -m4_if([$1], [v7], - [am__tar='$${TAR-tar} chof - "$$tardir"' am__untar='$${TAR-tar} xf -'], - - [m4_case([$1], - [ustar], - [# The POSIX 1988 'ustar' format is defined with fixed-size fields. - # There is notably a 21 bits limit for the UID and the GID. In fact, - # the 'pax' utility can hang on bigger UID/GID (see automake bug#8343 - # and bug#13588). - am_max_uid=2097151 # 2^21 - 1 - am_max_gid=$am_max_uid - # The $UID and $GID variables are not portable, so we need to resort - # to the POSIX-mandated id(1) utility. Errors in the 'id' calls - # below are definitely unexpected, so allow the users to see them - # (that is, avoid stderr redirection). - am_uid=`id -u || echo unknown` - am_gid=`id -g || echo unknown` - AC_MSG_CHECKING([whether UID '$am_uid' is supported by ustar format]) - if test $am_uid -le $am_max_uid; then - AC_MSG_RESULT([yes]) - else - AC_MSG_RESULT([no]) - _am_tools=none - fi - AC_MSG_CHECKING([whether GID '$am_gid' is supported by ustar format]) - if test $am_gid -le $am_max_gid; then - AC_MSG_RESULT([yes]) - else - AC_MSG_RESULT([no]) - _am_tools=none - fi], - - [pax], - [], - - [m4_fatal([Unknown tar format])]) - - AC_MSG_CHECKING([how to create a $1 tar archive]) - - # Go ahead even if we have the value already cached. We do so because we - # need to set the values for the 'am__tar' and 'am__untar' variables. - _am_tools=${am_cv_prog_tar_$1-$_am_tools} - - for _am_tool in $_am_tools; do - case $_am_tool in - gnutar) - for _am_tar in tar gnutar gtar; do - AM_RUN_LOG([$_am_tar --version]) && break - done - am__tar="$_am_tar --format=m4_if([$1], [pax], [posix], [$1]) -chf - "'"$$tardir"' - am__tar_="$_am_tar --format=m4_if([$1], [pax], [posix], [$1]) -chf - "'"$tardir"' - am__untar="$_am_tar -xf -" - ;; - plaintar) - # Must skip GNU tar: if it does not support --format= it doesn't create - # ustar tarball either. - (tar --version) >/dev/null 2>&1 && continue - am__tar='tar chf - "$$tardir"' - am__tar_='tar chf - "$tardir"' - am__untar='tar xf -' - ;; - pax) - am__tar='pax -L -x $1 -w "$$tardir"' - am__tar_='pax -L -x $1 -w "$tardir"' - am__untar='pax -r' - ;; - cpio) - am__tar='find "$$tardir" -print | cpio -o -H $1 -L' - am__tar_='find "$tardir" -print | cpio -o -H $1 -L' - am__untar='cpio -i -H $1 -d' - ;; - none) - am__tar=false - am__tar_=false - am__untar=false - ;; - esac - - # If the value was cached, stop now. We just wanted to have am__tar - # and am__untar set. - test -n "${am_cv_prog_tar_$1}" && break - - # tar/untar a dummy directory, and stop if the command works. - rm -rf conftest.dir - mkdir conftest.dir - echo GrepMe > conftest.dir/file - AM_RUN_LOG([tardir=conftest.dir && eval $am__tar_ >conftest.tar]) - rm -rf conftest.dir - if test -s conftest.tar; then - AM_RUN_LOG([$am__untar /dev/null 2>&1 && break - fi - done - rm -rf conftest.dir - - AC_CACHE_VAL([am_cv_prog_tar_$1], [am_cv_prog_tar_$1=$_am_tool]) - AC_MSG_RESULT([$am_cv_prog_tar_$1])]) - -AC_SUBST([am__tar]) -AC_SUBST([am__untar]) -]) # _AM_PROG_TAR - diff --git a/distribution/yocto-advanced/poky/meta-mini/recipes-hello/autohello/files/autohello/autogen.sh b/distribution/yocto-advanced/poky/meta-mini/recipes-hello/autohello/files/autohello/autogen.sh deleted file mode 100755 index 9088512..0000000 --- a/distribution/yocto-advanced/poky/meta-mini/recipes-hello/autohello/files/autohello/autogen.sh +++ /dev/null @@ -1,2 +0,0 @@ -#!/bin/bash -autoreconf -sif diff --git a/distribution/yocto-advanced/poky/meta-mini/recipes-hello/autohello/files/autohello/autohello-1.0.tar.gz b/distribution/yocto-advanced/poky/meta-mini/recipes-hello/autohello/files/autohello/autohello-1.0.tar.gz deleted file mode 100644 index a0099eb..0000000 Binary files a/distribution/yocto-advanced/poky/meta-mini/recipes-hello/autohello/files/autohello/autohello-1.0.tar.gz and /dev/null differ diff --git a/distribution/yocto-advanced/poky/meta-mini/recipes-hello/autohello/files/autohello/autohello-1.1.tar.gz b/distribution/yocto-advanced/poky/meta-mini/recipes-hello/autohello/files/autohello/autohello-1.1.tar.gz deleted file mode 100644 index 60e820c..0000000 Binary files a/distribution/yocto-advanced/poky/meta-mini/recipes-hello/autohello/files/autohello/autohello-1.1.tar.gz and /dev/null differ diff --git a/distribution/yocto-advanced/poky/meta-mini/recipes-hello/autohello/files/autohello/autohello.c b/distribution/yocto-advanced/poky/meta-mini/recipes-hello/autohello/files/autohello/autohello.c deleted file mode 100644 index d035085..0000000 --- a/distribution/yocto-advanced/poky/meta-mini/recipes-hello/autohello/files/autohello/autohello.c +++ /dev/null @@ -1,12 +0,0 @@ -#ifdef HAVE_CONFIG_H -#include "config.h" -#endif - -#include - -int main (int argc, char **argv) -{ - printf ("autohello poky world\n"); - - return 0; -} diff --git a/distribution/yocto-advanced/poky/meta-mini/recipes-hello/autohello/files/autohello/autom4te.cache/output.0 b/distribution/yocto-advanced/poky/meta-mini/recipes-hello/autohello/files/autohello/autom4te.cache/output.0 deleted file mode 100644 index d8629ca..0000000 --- a/distribution/yocto-advanced/poky/meta-mini/recipes-hello/autohello/files/autohello/autom4te.cache/output.0 +++ /dev/null @@ -1,4905 +0,0 @@ -@%:@! /bin/sh -@%:@ Guess values for system-dependent variables and create Makefiles. -@%:@ Generated by GNU Autoconf 2.69 for autohello 1.1. -@%:@ -@%:@ Report bugs to . -@%:@ -@%:@ -@%:@ Copyright (C) 1992-1996, 1998-2012 Free Software Foundation, Inc. -@%:@ -@%:@ -@%:@ This configure script is free software; the Free Software Foundation -@%:@ gives unlimited permission to copy, distribute and modify it. -## -------------------- ## -## M4sh Initialization. ## -## -------------------- ## - -# Be more Bourne compatible -DUALCASE=1; export DUALCASE # for MKS sh -if test -n "${ZSH_VERSION+set}" && (emulate sh) >/dev/null 2>&1; then : - emulate sh - NULLCMD=: - # Pre-4.2 versions of Zsh do word splitting on ${1+"$@"}, which - # is contrary to our usage. Disable this feature. - alias -g '${1+"$@"}'='"$@"' - setopt NO_GLOB_SUBST -else - case `(set -o) 2>/dev/null` in @%:@( - *posix*) : - set -o posix ;; @%:@( - *) : - ;; -esac -fi - - -as_nl=' -' -export as_nl -# Printing a long string crashes Solaris 7 /usr/bin/printf. -as_echo='\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\' -as_echo=$as_echo$as_echo$as_echo$as_echo$as_echo -as_echo=$as_echo$as_echo$as_echo$as_echo$as_echo$as_echo -# Prefer a ksh shell builtin over an external printf program on Solaris, -# but without wasting forks for bash or zsh. -if test -z "$BASH_VERSION$ZSH_VERSION" \ - && (test "X`print -r -- $as_echo`" = "X$as_echo") 2>/dev/null; then - as_echo='print -r --' - as_echo_n='print -rn --' -elif (test "X`printf %s $as_echo`" = "X$as_echo") 2>/dev/null; then - as_echo='printf %s\n' - as_echo_n='printf %s' -else - if test "X`(/usr/ucb/echo -n -n $as_echo) 2>/dev/null`" = "X-n $as_echo"; then - as_echo_body='eval /usr/ucb/echo -n "$1$as_nl"' - as_echo_n='/usr/ucb/echo -n' - else - as_echo_body='eval expr "X$1" : "X\\(.*\\)"' - as_echo_n_body='eval - arg=$1; - case $arg in @%:@( - *"$as_nl"*) - expr "X$arg" : "X\\(.*\\)$as_nl"; - arg=`expr "X$arg" : ".*$as_nl\\(.*\\)"`;; - esac; - expr "X$arg" : "X\\(.*\\)" | tr -d "$as_nl" - ' - export as_echo_n_body - as_echo_n='sh -c $as_echo_n_body as_echo' - fi - export as_echo_body - as_echo='sh -c $as_echo_body as_echo' -fi - -# The user is always right. -if test "${PATH_SEPARATOR+set}" != set; then - PATH_SEPARATOR=: - (PATH='/bin;/bin'; FPATH=$PATH; sh -c :) >/dev/null 2>&1 && { - (PATH='/bin:/bin'; FPATH=$PATH; sh -c :) >/dev/null 2>&1 || - PATH_SEPARATOR=';' - } -fi - - -# IFS -# We need space, tab and new line, in precisely that order. Quoting is -# there to prevent editors from complaining about space-tab. -# (If _AS_PATH_WALK were called with IFS unset, it would disable word -# splitting by setting IFS to empty value.) -IFS=" "" $as_nl" - -# Find who we are. Look in the path if we contain no directory separator. -as_myself= -case $0 in @%:@(( - *[\\/]* ) as_myself=$0 ;; - *) as_save_IFS=$IFS; IFS=$PATH_SEPARATOR -for as_dir in $PATH -do - IFS=$as_save_IFS - test -z "$as_dir" && as_dir=. - test -r "$as_dir/$0" && as_myself=$as_dir/$0 && break - done -IFS=$as_save_IFS - - ;; -esac -# We did not find ourselves, most probably we were run as `sh COMMAND' -# in which case we are not to be found in the path. -if test "x$as_myself" = x; then - as_myself=$0 -fi -if test ! -f "$as_myself"; then - $as_echo "$as_myself: error: cannot find myself; rerun with an absolute file name" >&2 - exit 1 -fi - -# Unset variables that we do not need and which cause bugs (e.g. in -# pre-3.0 UWIN ksh). But do not cause bugs in bash 2.01; the "|| exit 1" -# suppresses any "Segmentation fault" message there. '((' could -# trigger a bug in pdksh 5.2.14. -for as_var in BASH_ENV ENV MAIL MAILPATH -do eval test x\${$as_var+set} = xset \ - && ( (unset $as_var) || exit 1) >/dev/null 2>&1 && unset $as_var || : -done -PS1='$ ' -PS2='> ' -PS4='+ ' - -# NLS nuisances. -LC_ALL=C -export LC_ALL -LANGUAGE=C -export LANGUAGE - -# CDPATH. -(unset CDPATH) >/dev/null 2>&1 && unset CDPATH - -# Use a proper internal environment variable to ensure we don't fall - # into an infinite loop, continuously re-executing ourselves. - if test x"${_as_can_reexec}" != xno && test "x$CONFIG_SHELL" != x; then - _as_can_reexec=no; export _as_can_reexec; - # We cannot yet assume a decent shell, so we have to provide a -# neutralization value for shells without unset; and this also -# works around shells that cannot unset nonexistent variables. -# Preserve -v and -x to the replacement shell. -BASH_ENV=/dev/null -ENV=/dev/null -(unset BASH_ENV) >/dev/null 2>&1 && unset BASH_ENV ENV -case $- in @%:@ (((( - *v*x* | *x*v* ) as_opts=-vx ;; - *v* ) as_opts=-v ;; - *x* ) as_opts=-x ;; - * ) as_opts= ;; -esac -exec $CONFIG_SHELL $as_opts "$as_myself" ${1+"$@"} -# Admittedly, this is quite paranoid, since all the known shells bail -# out after a failed `exec'. -$as_echo "$0: could not re-execute with $CONFIG_SHELL" >&2 -as_fn_exit 255 - fi - # We don't want this to propagate to other subprocesses. - { _as_can_reexec=; unset _as_can_reexec;} -if test "x$CONFIG_SHELL" = x; then - as_bourne_compatible="if test -n \"\${ZSH_VERSION+set}\" && (emulate sh) >/dev/null 2>&1; then : - emulate sh - NULLCMD=: - # Pre-4.2 versions of Zsh do word splitting on \${1+\"\$@\"}, which - # is contrary to our usage. Disable this feature. - alias -g '\${1+\"\$@\"}'='\"\$@\"' - setopt NO_GLOB_SUBST -else - case \`(set -o) 2>/dev/null\` in @%:@( - *posix*) : - set -o posix ;; @%:@( - *) : - ;; -esac -fi -" - as_required="as_fn_return () { (exit \$1); } -as_fn_success () { as_fn_return 0; } -as_fn_failure () { as_fn_return 1; } -as_fn_ret_success () { return 0; } -as_fn_ret_failure () { return 1; } - -exitcode=0 -as_fn_success || { exitcode=1; echo as_fn_success failed.; } -as_fn_failure && { exitcode=1; echo as_fn_failure succeeded.; } -as_fn_ret_success || { exitcode=1; echo as_fn_ret_success failed.; } -as_fn_ret_failure && { exitcode=1; echo as_fn_ret_failure succeeded.; } -if ( set x; as_fn_ret_success y && test x = \"\$1\" ); then : - -else - exitcode=1; echo positional parameters were not saved. -fi -test x\$exitcode = x0 || exit 1 -test -x / || exit 1" - as_suggested=" as_lineno_1=";as_suggested=$as_suggested$LINENO;as_suggested=$as_suggested" as_lineno_1a=\$LINENO - as_lineno_2=";as_suggested=$as_suggested$LINENO;as_suggested=$as_suggested" as_lineno_2a=\$LINENO - eval 'test \"x\$as_lineno_1'\$as_run'\" != \"x\$as_lineno_2'\$as_run'\" && - test \"x\`expr \$as_lineno_1'\$as_run' + 1\`\" = \"x\$as_lineno_2'\$as_run'\"' || exit 1" - if (eval "$as_required") 2>/dev/null; then : - as_have_required=yes -else - as_have_required=no -fi - if test x$as_have_required = xyes && (eval "$as_suggested") 2>/dev/null; then : - -else - as_save_IFS=$IFS; IFS=$PATH_SEPARATOR -as_found=false -for as_dir in /bin$PATH_SEPARATOR/usr/bin$PATH_SEPARATOR$PATH -do - IFS=$as_save_IFS - test -z "$as_dir" && as_dir=. - as_found=: - case $as_dir in @%:@( - /*) - for as_base in sh bash ksh sh5; do - # Try only shells that exist, to save several forks. - as_shell=$as_dir/$as_base - if { test -f "$as_shell" || test -f "$as_shell.exe"; } && - { $as_echo "$as_bourne_compatible""$as_required" | as_run=a "$as_shell"; } 2>/dev/null; then : - CONFIG_SHELL=$as_shell as_have_required=yes - if { $as_echo "$as_bourne_compatible""$as_suggested" | as_run=a "$as_shell"; } 2>/dev/null; then : - break 2 -fi -fi - done;; - esac - as_found=false -done -$as_found || { if { test -f "$SHELL" || test -f "$SHELL.exe"; } && - { $as_echo "$as_bourne_compatible""$as_required" | as_run=a "$SHELL"; } 2>/dev/null; then : - CONFIG_SHELL=$SHELL as_have_required=yes -fi; } -IFS=$as_save_IFS - - - if test "x$CONFIG_SHELL" != x; then : - export CONFIG_SHELL - # We cannot yet assume a decent shell, so we have to provide a -# neutralization value for shells without unset; and this also -# works around shells that cannot unset nonexistent variables. -# Preserve -v and -x to the replacement shell. -BASH_ENV=/dev/null -ENV=/dev/null -(unset BASH_ENV) >/dev/null 2>&1 && unset BASH_ENV ENV -case $- in @%:@ (((( - *v*x* | *x*v* ) as_opts=-vx ;; - *v* ) as_opts=-v ;; - *x* ) as_opts=-x ;; - * ) as_opts= ;; -esac -exec $CONFIG_SHELL $as_opts "$as_myself" ${1+"$@"} -# Admittedly, this is quite paranoid, since all the known shells bail -# out after a failed `exec'. -$as_echo "$0: could not re-execute with $CONFIG_SHELL" >&2 -exit 255 -fi - - if test x$as_have_required = xno; then : - $as_echo "$0: This script requires a shell more modern than all" - $as_echo "$0: the shells that I found on your system." - if test x${ZSH_VERSION+set} = xset ; then - $as_echo "$0: In particular, zsh $ZSH_VERSION has bugs and should" - $as_echo "$0: be upgraded to zsh 4.3.4 or later." - else - $as_echo "$0: Please tell bug-autoconf@gnu.org and -$0: maunt@linutronix.de about your system, including any -$0: error possibly output before this message. Then install -$0: a modern shell, or manually run the script under such a -$0: shell if you do have one." - fi - exit 1 -fi -fi -fi -SHELL=${CONFIG_SHELL-/bin/sh} -export SHELL -# Unset more variables known to interfere with behavior of common tools. -CLICOLOR_FORCE= GREP_OPTIONS= -unset CLICOLOR_FORCE GREP_OPTIONS - -## --------------------- ## -## M4sh Shell Functions. ## -## --------------------- ## -@%:@ as_fn_unset VAR -@%:@ --------------- -@%:@ Portably unset VAR. -as_fn_unset () -{ - { eval $1=; unset $1;} -} -as_unset=as_fn_unset - -@%:@ as_fn_set_status STATUS -@%:@ ----------------------- -@%:@ Set @S|@? to STATUS, without forking. -as_fn_set_status () -{ - return $1 -} @%:@ as_fn_set_status - -@%:@ as_fn_exit STATUS -@%:@ ----------------- -@%:@ Exit the shell with STATUS, even in a "trap 0" or "set -e" context. -as_fn_exit () -{ - set +e - as_fn_set_status $1 - exit $1 -} @%:@ as_fn_exit - -@%:@ as_fn_mkdir_p -@%:@ ------------- -@%:@ Create "@S|@as_dir" as a directory, including parents if necessary. -as_fn_mkdir_p () -{ - - case $as_dir in #( - -*) as_dir=./$as_dir;; - esac - test -d "$as_dir" || eval $as_mkdir_p || { - as_dirs= - while :; do - case $as_dir in #( - *\'*) as_qdir=`$as_echo "$as_dir" | sed "s/'/'\\\\\\\\''/g"`;; #'( - *) as_qdir=$as_dir;; - esac - as_dirs="'$as_qdir' $as_dirs" - as_dir=`$as_dirname -- "$as_dir" || -$as_expr X"$as_dir" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \ - X"$as_dir" : 'X\(//\)[^/]' \| \ - X"$as_dir" : 'X\(//\)$' \| \ - X"$as_dir" : 'X\(/\)' \| . 2>/dev/null || -$as_echo X"$as_dir" | - sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ - s//\1/ - q - } - /^X\(\/\/\)[^/].*/{ - s//\1/ - q - } - /^X\(\/\/\)$/{ - s//\1/ - q - } - /^X\(\/\).*/{ - s//\1/ - q - } - s/.*/./; q'` - test -d "$as_dir" && break - done - test -z "$as_dirs" || eval "mkdir $as_dirs" - } || test -d "$as_dir" || as_fn_error $? "cannot create directory $as_dir" - - -} @%:@ as_fn_mkdir_p - -@%:@ as_fn_executable_p FILE -@%:@ ----------------------- -@%:@ Test if FILE is an executable regular file. -as_fn_executable_p () -{ - test -f "$1" && test -x "$1" -} @%:@ as_fn_executable_p -@%:@ as_fn_append VAR VALUE -@%:@ ---------------------- -@%:@ Append the text in VALUE to the end of the definition contained in VAR. Take -@%:@ advantage of any shell optimizations that allow amortized linear growth over -@%:@ repeated appends, instead of the typical quadratic growth present in naive -@%:@ implementations. -if (eval "as_var=1; as_var+=2; test x\$as_var = x12") 2>/dev/null; then : - eval 'as_fn_append () - { - eval $1+=\$2 - }' -else - as_fn_append () - { - eval $1=\$$1\$2 - } -fi # as_fn_append - -@%:@ as_fn_arith ARG... -@%:@ ------------------ -@%:@ Perform arithmetic evaluation on the ARGs, and store the result in the -@%:@ global @S|@as_val. Take advantage of shells that can avoid forks. The arguments -@%:@ must be portable across @S|@(()) and expr. -if (eval "test \$(( 1 + 1 )) = 2") 2>/dev/null; then : - eval 'as_fn_arith () - { - as_val=$(( $* )) - }' -else - as_fn_arith () - { - as_val=`expr "$@" || test $? -eq 1` - } -fi # as_fn_arith - - -@%:@ as_fn_error STATUS ERROR [LINENO LOG_FD] -@%:@ ---------------------------------------- -@%:@ Output "`basename @S|@0`: error: ERROR" to stderr. If LINENO and LOG_FD are -@%:@ provided, also output the error to LOG_FD, referencing LINENO. Then exit the -@%:@ script with STATUS, using 1 if that was 0. -as_fn_error () -{ - as_status=$1; test $as_status -eq 0 && as_status=1 - if test "$4"; then - as_lineno=${as_lineno-"$3"} as_lineno_stack=as_lineno_stack=$as_lineno_stack - $as_echo "$as_me:${as_lineno-$LINENO}: error: $2" >&$4 - fi - $as_echo "$as_me: error: $2" >&2 - as_fn_exit $as_status -} @%:@ as_fn_error - -if expr a : '\(a\)' >/dev/null 2>&1 && - test "X`expr 00001 : '.*\(...\)'`" = X001; then - as_expr=expr -else - as_expr=false -fi - -if (basename -- /) >/dev/null 2>&1 && test "X`basename -- / 2>&1`" = "X/"; then - as_basename=basename -else - as_basename=false -fi - -if (as_dir=`dirname -- /` && test "X$as_dir" = X/) >/dev/null 2>&1; then - as_dirname=dirname -else - as_dirname=false -fi - -as_me=`$as_basename -- "$0" || -$as_expr X/"$0" : '.*/\([^/][^/]*\)/*$' \| \ - X"$0" : 'X\(//\)$' \| \ - X"$0" : 'X\(/\)' \| . 2>/dev/null || -$as_echo X/"$0" | - sed '/^.*\/\([^/][^/]*\)\/*$/{ - s//\1/ - q - } - /^X\/\(\/\/\)$/{ - s//\1/ - q - } - /^X\/\(\/\).*/{ - s//\1/ - q - } - s/.*/./; q'` - -# Avoid depending upon Character Ranges. -as_cr_letters='abcdefghijklmnopqrstuvwxyz' -as_cr_LETTERS='ABCDEFGHIJKLMNOPQRSTUVWXYZ' -as_cr_Letters=$as_cr_letters$as_cr_LETTERS -as_cr_digits='0123456789' -as_cr_alnum=$as_cr_Letters$as_cr_digits - - - as_lineno_1=$LINENO as_lineno_1a=$LINENO - as_lineno_2=$LINENO as_lineno_2a=$LINENO - eval 'test "x$as_lineno_1'$as_run'" != "x$as_lineno_2'$as_run'" && - test "x`expr $as_lineno_1'$as_run' + 1`" = "x$as_lineno_2'$as_run'"' || { - # Blame Lee E. McMahon (1931-1989) for sed's syntax. :-) - sed -n ' - p - /[$]LINENO/= - ' <$as_myself | - sed ' - s/[$]LINENO.*/&-/ - t lineno - b - :lineno - N - :loop - s/[$]LINENO\([^'$as_cr_alnum'_].*\n\)\(.*\)/\2\1\2/ - t loop - s/-\n.*// - ' >$as_me.lineno && - chmod +x "$as_me.lineno" || - { $as_echo "$as_me: error: cannot create $as_me.lineno; rerun with a POSIX shell" >&2; as_fn_exit 1; } - - # If we had to re-execute with $CONFIG_SHELL, we're ensured to have - # already done that, so ensure we don't try to do so again and fall - # in an infinite loop. This has already happened in practice. - _as_can_reexec=no; export _as_can_reexec - # Don't try to exec as it changes $[0], causing all sort of problems - # (the dirname of $[0] is not the place where we might find the - # original and so on. Autoconf is especially sensitive to this). - . "./$as_me.lineno" - # Exit status is that of the last command. - exit -} - -ECHO_C= ECHO_N= ECHO_T= -case `echo -n x` in @%:@((((( --n*) - case `echo 'xy\c'` in - *c*) ECHO_T=' ';; # ECHO_T is single tab character. - xy) ECHO_C='\c';; - *) echo `echo ksh88 bug on AIX 6.1` > /dev/null - ECHO_T=' ';; - esac;; -*) - ECHO_N='-n';; -esac - -rm -f conf$$ conf$$.exe conf$$.file -if test -d conf$$.dir; then - rm -f conf$$.dir/conf$$.file -else - rm -f conf$$.dir - mkdir conf$$.dir 2>/dev/null -fi -if (echo >conf$$.file) 2>/dev/null; then - if ln -s conf$$.file conf$$ 2>/dev/null; then - as_ln_s='ln -s' - # ... but there are two gotchas: - # 1) On MSYS, both `ln -s file dir' and `ln file dir' fail. - # 2) DJGPP < 2.04 has no symlinks; `ln -s' creates a wrapper executable. - # In both cases, we have to default to `cp -pR'. - ln -s conf$$.file conf$$.dir 2>/dev/null && test ! -f conf$$.exe || - as_ln_s='cp -pR' - elif ln conf$$.file conf$$ 2>/dev/null; then - as_ln_s=ln - else - as_ln_s='cp -pR' - fi -else - as_ln_s='cp -pR' -fi -rm -f conf$$ conf$$.exe conf$$.dir/conf$$.file conf$$.file -rmdir conf$$.dir 2>/dev/null - -if mkdir -p . 2>/dev/null; then - as_mkdir_p='mkdir -p "$as_dir"' -else - test -d ./-p && rmdir ./-p - as_mkdir_p=false -fi - -as_test_x='test -x' -as_executable_p=as_fn_executable_p - -# Sed expression to map a string onto a valid CPP name. -as_tr_cpp="eval sed 'y%*$as_cr_letters%P$as_cr_LETTERS%;s%[^_$as_cr_alnum]%_%g'" - -# Sed expression to map a string onto a valid variable name. -as_tr_sh="eval sed 'y%*+%pp%;s%[^_$as_cr_alnum]%_%g'" - - -test -n "$DJDIR" || exec 7<&0 &1 - -# Name of the host. -# hostname on some systems (SVR3.2, old GNU/Linux) returns a bogus exit status, -# so uname gets run too. -ac_hostname=`(hostname || uname -n) 2>/dev/null | sed 1q` - -# -# Initializations. -# -ac_default_prefix=/usr/local -ac_clean_files= -ac_config_libobj_dir=. -LIB@&t@OBJS= -cross_compiling=no -subdirs= -MFLAGS= -MAKEFLAGS= - -# Identity of this package. -PACKAGE_NAME='autohello' -PACKAGE_TARNAME='autohello' -PACKAGE_VERSION='1.1' -PACKAGE_STRING='autohello 1.1' -PACKAGE_BUGREPORT='maunt@linutronix.de' -PACKAGE_URL='' - -ac_unique_file="autohello.c" -ac_subst_vars='am__EXEEXT_FALSE -am__EXEEXT_TRUE -LTLIBOBJS -LIB@&t@OBJS -am__fastdepCC_FALSE -am__fastdepCC_TRUE -CCDEPMODE -am__nodep -AMDEPBACKSLASH -AMDEP_FALSE -AMDEP_TRUE -am__quote -am__include -DEPDIR -OBJEXT -EXEEXT -ac_ct_CC -CPPFLAGS -LDFLAGS -CFLAGS -CC -AM_BACKSLASH -AM_DEFAULT_VERBOSITY -AM_DEFAULT_V -AM_V -am__untar -am__tar -AMTAR -am__leading_dot -SET_MAKE -AWK -mkdir_p -MKDIR_P -INSTALL_STRIP_PROGRAM -STRIP -install_sh -MAKEINFO -AUTOHEADER -AUTOMAKE -AUTOCONF -ACLOCAL -VERSION -PACKAGE -CYGPATH_W -am__isrc -INSTALL_DATA -INSTALL_SCRIPT -INSTALL_PROGRAM -target_alias -host_alias -build_alias -LIBS -ECHO_T -ECHO_N -ECHO_C -DEFS -mandir -localedir -libdir -psdir -pdfdir -dvidir -htmldir -infodir -docdir -oldincludedir -includedir -localstatedir -sharedstatedir -sysconfdir -datadir -datarootdir -libexecdir -sbindir -bindir -program_transform_name -prefix -exec_prefix -PACKAGE_URL -PACKAGE_BUGREPORT -PACKAGE_STRING -PACKAGE_VERSION -PACKAGE_TARNAME -PACKAGE_NAME -PATH_SEPARATOR -SHELL' -ac_subst_files='' -ac_user_opts=' -enable_option_checking -enable_silent_rules -enable_dependency_tracking -' - ac_precious_vars='build_alias -host_alias -target_alias -CC -CFLAGS -LDFLAGS -LIBS -CPPFLAGS' - - -# Initialize some variables set by options. -ac_init_help= -ac_init_version=false -ac_unrecognized_opts= -ac_unrecognized_sep= -# The variables have the same names as the options, with -# dashes changed to underlines. -cache_file=/dev/null -exec_prefix=NONE -no_create= -no_recursion= -prefix=NONE -program_prefix=NONE -program_suffix=NONE -program_transform_name=s,x,x, -silent= -site= -srcdir= -verbose= -x_includes=NONE -x_libraries=NONE - -# Installation directory options. -# These are left unexpanded so users can "make install exec_prefix=/foo" -# and all the variables that are supposed to be based on exec_prefix -# by default will actually change. -# Use braces instead of parens because sh, perl, etc. also accept them. -# (The list follows the same order as the GNU Coding Standards.) -bindir='${exec_prefix}/bin' -sbindir='${exec_prefix}/sbin' -libexecdir='${exec_prefix}/libexec' -datarootdir='${prefix}/share' -datadir='${datarootdir}' -sysconfdir='${prefix}/etc' -sharedstatedir='${prefix}/com' -localstatedir='${prefix}/var' -includedir='${prefix}/include' -oldincludedir='/usr/include' -docdir='${datarootdir}/doc/${PACKAGE_TARNAME}' -infodir='${datarootdir}/info' -htmldir='${docdir}' -dvidir='${docdir}' -pdfdir='${docdir}' -psdir='${docdir}' -libdir='${exec_prefix}/lib' -localedir='${datarootdir}/locale' -mandir='${datarootdir}/man' - -ac_prev= -ac_dashdash= -for ac_option -do - # If the previous option needs an argument, assign it. - if test -n "$ac_prev"; then - eval $ac_prev=\$ac_option - ac_prev= - continue - fi - - case $ac_option in - *=?*) ac_optarg=`expr "X$ac_option" : '[^=]*=\(.*\)'` ;; - *=) ac_optarg= ;; - *) ac_optarg=yes ;; - esac - - # Accept the important Cygnus configure options, so we can diagnose typos. - - case $ac_dashdash$ac_option in - --) - ac_dashdash=yes ;; - - -bindir | --bindir | --bindi | --bind | --bin | --bi) - ac_prev=bindir ;; - -bindir=* | --bindir=* | --bindi=* | --bind=* | --bin=* | --bi=*) - bindir=$ac_optarg ;; - - -build | --build | --buil | --bui | --bu) - ac_prev=build_alias ;; - -build=* | --build=* | --buil=* | --bui=* | --bu=*) - build_alias=$ac_optarg ;; - - -cache-file | --cache-file | --cache-fil | --cache-fi \ - | --cache-f | --cache- | --cache | --cach | --cac | --ca | --c) - ac_prev=cache_file ;; - -cache-file=* | --cache-file=* | --cache-fil=* | --cache-fi=* \ - | --cache-f=* | --cache-=* | --cache=* | --cach=* | --cac=* | --ca=* | --c=*) - cache_file=$ac_optarg ;; - - --config-cache | -C) - cache_file=config.cache ;; - - -datadir | --datadir | --datadi | --datad) - ac_prev=datadir ;; - -datadir=* | --datadir=* | --datadi=* | --datad=*) - datadir=$ac_optarg ;; - - -datarootdir | --datarootdir | --datarootdi | --datarootd | --dataroot \ - | --dataroo | --dataro | --datar) - ac_prev=datarootdir ;; - -datarootdir=* | --datarootdir=* | --datarootdi=* | --datarootd=* \ - | --dataroot=* | --dataroo=* | --dataro=* | --datar=*) - datarootdir=$ac_optarg ;; - - -disable-* | --disable-*) - ac_useropt=`expr "x$ac_option" : 'x-*disable-\(.*\)'` - # Reject names that are not valid shell variable names. - expr "x$ac_useropt" : ".*[^-+._$as_cr_alnum]" >/dev/null && - as_fn_error $? "invalid feature name: $ac_useropt" - ac_useropt_orig=$ac_useropt - ac_useropt=`$as_echo "$ac_useropt" | sed 's/[-+.]/_/g'` - case $ac_user_opts in - *" -"enable_$ac_useropt" -"*) ;; - *) ac_unrecognized_opts="$ac_unrecognized_opts$ac_unrecognized_sep--disable-$ac_useropt_orig" - ac_unrecognized_sep=', ';; - esac - eval enable_$ac_useropt=no ;; - - -docdir | --docdir | --docdi | --doc | --do) - ac_prev=docdir ;; - -docdir=* | --docdir=* | --docdi=* | --doc=* | --do=*) - docdir=$ac_optarg ;; - - -dvidir | --dvidir | --dvidi | --dvid | --dvi | --dv) - ac_prev=dvidir ;; - -dvidir=* | --dvidir=* | --dvidi=* | --dvid=* | --dvi=* | --dv=*) - dvidir=$ac_optarg ;; - - -enable-* | --enable-*) - ac_useropt=`expr "x$ac_option" : 'x-*enable-\([^=]*\)'` - # Reject names that are not valid shell variable names. - expr "x$ac_useropt" : ".*[^-+._$as_cr_alnum]" >/dev/null && - as_fn_error $? "invalid feature name: $ac_useropt" - ac_useropt_orig=$ac_useropt - ac_useropt=`$as_echo "$ac_useropt" | sed 's/[-+.]/_/g'` - case $ac_user_opts in - *" -"enable_$ac_useropt" -"*) ;; - *) ac_unrecognized_opts="$ac_unrecognized_opts$ac_unrecognized_sep--enable-$ac_useropt_orig" - ac_unrecognized_sep=', ';; - esac - eval enable_$ac_useropt=\$ac_optarg ;; - - -exec-prefix | --exec_prefix | --exec-prefix | --exec-prefi \ - | --exec-pref | --exec-pre | --exec-pr | --exec-p | --exec- \ - | --exec | --exe | --ex) - ac_prev=exec_prefix ;; - -exec-prefix=* | --exec_prefix=* | --exec-prefix=* | --exec-prefi=* \ - | --exec-pref=* | --exec-pre=* | --exec-pr=* | --exec-p=* | --exec-=* \ - | --exec=* | --exe=* | --ex=*) - exec_prefix=$ac_optarg ;; - - -gas | --gas | --ga | --g) - # Obsolete; use --with-gas. - with_gas=yes ;; - - -help | --help | --hel | --he | -h) - ac_init_help=long ;; - -help=r* | --help=r* | --hel=r* | --he=r* | -hr*) - ac_init_help=recursive ;; - -help=s* | --help=s* | --hel=s* | --he=s* | -hs*) - ac_init_help=short ;; - - -host | --host | --hos | --ho) - ac_prev=host_alias ;; - -host=* | --host=* | --hos=* | --ho=*) - host_alias=$ac_optarg ;; - - -htmldir | --htmldir | --htmldi | --htmld | --html | --htm | --ht) - ac_prev=htmldir ;; - -htmldir=* | --htmldir=* | --htmldi=* | --htmld=* | --html=* | --htm=* \ - | --ht=*) - htmldir=$ac_optarg ;; - - -includedir | --includedir | --includedi | --included | --include \ - | --includ | --inclu | --incl | --inc) - ac_prev=includedir ;; - -includedir=* | --includedir=* | --includedi=* | --included=* | --include=* \ - | --includ=* | --inclu=* | --incl=* | --inc=*) - includedir=$ac_optarg ;; - - -infodir | --infodir | --infodi | --infod | --info | --inf) - ac_prev=infodir ;; - -infodir=* | --infodir=* | --infodi=* | --infod=* | --info=* | --inf=*) - infodir=$ac_optarg ;; - - -libdir | --libdir | --libdi | --libd) - ac_prev=libdir ;; - -libdir=* | --libdir=* | --libdi=* | --libd=*) - libdir=$ac_optarg ;; - - -libexecdir | --libexecdir | --libexecdi | --libexecd | --libexec \ - | --libexe | --libex | --libe) - ac_prev=libexecdir ;; - -libexecdir=* | --libexecdir=* | --libexecdi=* | --libexecd=* | --libexec=* \ - | --libexe=* | --libex=* | --libe=*) - libexecdir=$ac_optarg ;; - - -localedir | --localedir | --localedi | --localed | --locale) - ac_prev=localedir ;; - -localedir=* | --localedir=* | --localedi=* | --localed=* | --locale=*) - localedir=$ac_optarg ;; - - -localstatedir | --localstatedir | --localstatedi | --localstated \ - | --localstate | --localstat | --localsta | --localst | --locals) - ac_prev=localstatedir ;; - -localstatedir=* | --localstatedir=* | --localstatedi=* | --localstated=* \ - | --localstate=* | --localstat=* | --localsta=* | --localst=* | --locals=*) - localstatedir=$ac_optarg ;; - - -mandir | --mandir | --mandi | --mand | --man | --ma | --m) - ac_prev=mandir ;; - -mandir=* | --mandir=* | --mandi=* | --mand=* | --man=* | --ma=* | --m=*) - mandir=$ac_optarg ;; - - -nfp | --nfp | --nf) - # Obsolete; use --without-fp. - with_fp=no ;; - - -no-create | --no-create | --no-creat | --no-crea | --no-cre \ - | --no-cr | --no-c | -n) - no_create=yes ;; - - -no-recursion | --no-recursion | --no-recursio | --no-recursi \ - | --no-recurs | --no-recur | --no-recu | --no-rec | --no-re | --no-r) - no_recursion=yes ;; - - -oldincludedir | --oldincludedir | --oldincludedi | --oldincluded \ - | --oldinclude | --oldinclud | --oldinclu | --oldincl | --oldinc \ - | --oldin | --oldi | --old | --ol | --o) - ac_prev=oldincludedir ;; - -oldincludedir=* | --oldincludedir=* | --oldincludedi=* | --oldincluded=* \ - | --oldinclude=* | --oldinclud=* | --oldinclu=* | --oldincl=* | --oldinc=* \ - | --oldin=* | --oldi=* | --old=* | --ol=* | --o=*) - oldincludedir=$ac_optarg ;; - - -prefix | --prefix | --prefi | --pref | --pre | --pr | --p) - ac_prev=prefix ;; - -prefix=* | --prefix=* | --prefi=* | --pref=* | --pre=* | --pr=* | --p=*) - prefix=$ac_optarg ;; - - -program-prefix | --program-prefix | --program-prefi | --program-pref \ - | --program-pre | --program-pr | --program-p) - ac_prev=program_prefix ;; - -program-prefix=* | --program-prefix=* | --program-prefi=* \ - | --program-pref=* | --program-pre=* | --program-pr=* | --program-p=*) - program_prefix=$ac_optarg ;; - - -program-suffix | --program-suffix | --program-suffi | --program-suff \ - | --program-suf | --program-su | --program-s) - ac_prev=program_suffix ;; - -program-suffix=* | --program-suffix=* | --program-suffi=* \ - | --program-suff=* | --program-suf=* | --program-su=* | --program-s=*) - program_suffix=$ac_optarg ;; - - -program-transform-name | --program-transform-name \ - | --program-transform-nam | --program-transform-na \ - | --program-transform-n | --program-transform- \ - | --program-transform | --program-transfor \ - | --program-transfo | --program-transf \ - | --program-trans | --program-tran \ - | --progr-tra | --program-tr | --program-t) - ac_prev=program_transform_name ;; - -program-transform-name=* | --program-transform-name=* \ - | --program-transform-nam=* | --program-transform-na=* \ - | --program-transform-n=* | --program-transform-=* \ - | --program-transform=* | --program-transfor=* \ - | --program-transfo=* | --program-transf=* \ - | --program-trans=* | --program-tran=* \ - | --progr-tra=* | --program-tr=* | --program-t=*) - program_transform_name=$ac_optarg ;; - - -pdfdir | --pdfdir | --pdfdi | --pdfd | --pdf | --pd) - ac_prev=pdfdir ;; - -pdfdir=* | --pdfdir=* | --pdfdi=* | --pdfd=* | --pdf=* | --pd=*) - pdfdir=$ac_optarg ;; - - -psdir | --psdir | --psdi | --psd | --ps) - ac_prev=psdir ;; - -psdir=* | --psdir=* | --psdi=* | --psd=* | --ps=*) - psdir=$ac_optarg ;; - - -q | -quiet | --quiet | --quie | --qui | --qu | --q \ - | -silent | --silent | --silen | --sile | --sil) - silent=yes ;; - - -sbindir | --sbindir | --sbindi | --sbind | --sbin | --sbi | --sb) - ac_prev=sbindir ;; - -sbindir=* | --sbindir=* | --sbindi=* | --sbind=* | --sbin=* \ - | --sbi=* | --sb=*) - sbindir=$ac_optarg ;; - - -sharedstatedir | --sharedstatedir | --sharedstatedi \ - | --sharedstated | --sharedstate | --sharedstat | --sharedsta \ - | --sharedst | --shareds | --shared | --share | --shar \ - | --sha | --sh) - ac_prev=sharedstatedir ;; - -sharedstatedir=* | --sharedstatedir=* | --sharedstatedi=* \ - | --sharedstated=* | --sharedstate=* | --sharedstat=* | --sharedsta=* \ - | --sharedst=* | --shareds=* | --shared=* | --share=* | --shar=* \ - | --sha=* | --sh=*) - sharedstatedir=$ac_optarg ;; - - -site | --site | --sit) - ac_prev=site ;; - -site=* | --site=* | --sit=*) - site=$ac_optarg ;; - - -srcdir | --srcdir | --srcdi | --srcd | --src | --sr) - ac_prev=srcdir ;; - -srcdir=* | --srcdir=* | --srcdi=* | --srcd=* | --src=* | --sr=*) - srcdir=$ac_optarg ;; - - -sysconfdir | --sysconfdir | --sysconfdi | --sysconfd | --sysconf \ - | --syscon | --sysco | --sysc | --sys | --sy) - ac_prev=sysconfdir ;; - -sysconfdir=* | --sysconfdir=* | --sysconfdi=* | --sysconfd=* | --sysconf=* \ - | --syscon=* | --sysco=* | --sysc=* | --sys=* | --sy=*) - sysconfdir=$ac_optarg ;; - - -target | --target | --targe | --targ | --tar | --ta | --t) - ac_prev=target_alias ;; - -target=* | --target=* | --targe=* | --targ=* | --tar=* | --ta=* | --t=*) - target_alias=$ac_optarg ;; - - -v | -verbose | --verbose | --verbos | --verbo | --verb) - verbose=yes ;; - - -version | --version | --versio | --versi | --vers | -V) - ac_init_version=: ;; - - -with-* | --with-*) - ac_useropt=`expr "x$ac_option" : 'x-*with-\([^=]*\)'` - # Reject names that are not valid shell variable names. - expr "x$ac_useropt" : ".*[^-+._$as_cr_alnum]" >/dev/null && - as_fn_error $? "invalid package name: $ac_useropt" - ac_useropt_orig=$ac_useropt - ac_useropt=`$as_echo "$ac_useropt" | sed 's/[-+.]/_/g'` - case $ac_user_opts in - *" -"with_$ac_useropt" -"*) ;; - *) ac_unrecognized_opts="$ac_unrecognized_opts$ac_unrecognized_sep--with-$ac_useropt_orig" - ac_unrecognized_sep=', ';; - esac - eval with_$ac_useropt=\$ac_optarg ;; - - -without-* | --without-*) - ac_useropt=`expr "x$ac_option" : 'x-*without-\(.*\)'` - # Reject names that are not valid shell variable names. - expr "x$ac_useropt" : ".*[^-+._$as_cr_alnum]" >/dev/null && - as_fn_error $? "invalid package name: $ac_useropt" - ac_useropt_orig=$ac_useropt - ac_useropt=`$as_echo "$ac_useropt" | sed 's/[-+.]/_/g'` - case $ac_user_opts in - *" -"with_$ac_useropt" -"*) ;; - *) ac_unrecognized_opts="$ac_unrecognized_opts$ac_unrecognized_sep--without-$ac_useropt_orig" - ac_unrecognized_sep=', ';; - esac - eval with_$ac_useropt=no ;; - - --x) - # Obsolete; use --with-x. - with_x=yes ;; - - -x-includes | --x-includes | --x-include | --x-includ | --x-inclu \ - | --x-incl | --x-inc | --x-in | --x-i) - ac_prev=x_includes ;; - -x-includes=* | --x-includes=* | --x-include=* | --x-includ=* | --x-inclu=* \ - | --x-incl=* | --x-inc=* | --x-in=* | --x-i=*) - x_includes=$ac_optarg ;; - - -x-libraries | --x-libraries | --x-librarie | --x-librari \ - | --x-librar | --x-libra | --x-libr | --x-lib | --x-li | --x-l) - ac_prev=x_libraries ;; - -x-libraries=* | --x-libraries=* | --x-librarie=* | --x-librari=* \ - | --x-librar=* | --x-libra=* | --x-libr=* | --x-lib=* | --x-li=* | --x-l=*) - x_libraries=$ac_optarg ;; - - -*) as_fn_error $? "unrecognized option: \`$ac_option' -Try \`$0 --help' for more information" - ;; - - *=*) - ac_envvar=`expr "x$ac_option" : 'x\([^=]*\)='` - # Reject names that are not valid shell variable names. - case $ac_envvar in #( - '' | [0-9]* | *[!_$as_cr_alnum]* ) - as_fn_error $? "invalid variable name: \`$ac_envvar'" ;; - esac - eval $ac_envvar=\$ac_optarg - export $ac_envvar ;; - - *) - # FIXME: should be removed in autoconf 3.0. - $as_echo "$as_me: WARNING: you should use --build, --host, --target" >&2 - expr "x$ac_option" : ".*[^-._$as_cr_alnum]" >/dev/null && - $as_echo "$as_me: WARNING: invalid host type: $ac_option" >&2 - : "${build_alias=$ac_option} ${host_alias=$ac_option} ${target_alias=$ac_option}" - ;; - - esac -done - -if test -n "$ac_prev"; then - ac_option=--`echo $ac_prev | sed 's/_/-/g'` - as_fn_error $? "missing argument to $ac_option" -fi - -if test -n "$ac_unrecognized_opts"; then - case $enable_option_checking in - no) ;; - fatal) as_fn_error $? "unrecognized options: $ac_unrecognized_opts" ;; - *) $as_echo "$as_me: WARNING: unrecognized options: $ac_unrecognized_opts" >&2 ;; - esac -fi - -# Check all directory arguments for consistency. -for ac_var in exec_prefix prefix bindir sbindir libexecdir datarootdir \ - datadir sysconfdir sharedstatedir localstatedir includedir \ - oldincludedir docdir infodir htmldir dvidir pdfdir psdir \ - libdir localedir mandir -do - eval ac_val=\$$ac_var - # Remove trailing slashes. - case $ac_val in - */ ) - ac_val=`expr "X$ac_val" : 'X\(.*[^/]\)' \| "X$ac_val" : 'X\(.*\)'` - eval $ac_var=\$ac_val;; - esac - # Be sure to have absolute directory names. - case $ac_val in - [\\/$]* | ?:[\\/]* ) continue;; - NONE | '' ) case $ac_var in *prefix ) continue;; esac;; - esac - as_fn_error $? "expected an absolute directory name for --$ac_var: $ac_val" -done - -# There might be people who depend on the old broken behavior: `$host' -# used to hold the argument of --host etc. -# FIXME: To remove some day. -build=$build_alias -host=$host_alias -target=$target_alias - -# FIXME: To remove some day. -if test "x$host_alias" != x; then - if test "x$build_alias" = x; then - cross_compiling=maybe - elif test "x$build_alias" != "x$host_alias"; then - cross_compiling=yes - fi -fi - -ac_tool_prefix= -test -n "$host_alias" && ac_tool_prefix=$host_alias- - -test "$silent" = yes && exec 6>/dev/null - - -ac_pwd=`pwd` && test -n "$ac_pwd" && -ac_ls_di=`ls -di .` && -ac_pwd_ls_di=`cd "$ac_pwd" && ls -di .` || - as_fn_error $? "working directory cannot be determined" -test "X$ac_ls_di" = "X$ac_pwd_ls_di" || - as_fn_error $? "pwd does not report name of working directory" - - -# Find the source files, if location was not specified. -if test -z "$srcdir"; then - ac_srcdir_defaulted=yes - # Try the directory containing this script, then the parent directory. - ac_confdir=`$as_dirname -- "$as_myself" || -$as_expr X"$as_myself" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \ - X"$as_myself" : 'X\(//\)[^/]' \| \ - X"$as_myself" : 'X\(//\)$' \| \ - X"$as_myself" : 'X\(/\)' \| . 2>/dev/null || -$as_echo X"$as_myself" | - sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ - s//\1/ - q - } - /^X\(\/\/\)[^/].*/{ - s//\1/ - q - } - /^X\(\/\/\)$/{ - s//\1/ - q - } - /^X\(\/\).*/{ - s//\1/ - q - } - s/.*/./; q'` - srcdir=$ac_confdir - if test ! -r "$srcdir/$ac_unique_file"; then - srcdir=.. - fi -else - ac_srcdir_defaulted=no -fi -if test ! -r "$srcdir/$ac_unique_file"; then - test "$ac_srcdir_defaulted" = yes && srcdir="$ac_confdir or .." - as_fn_error $? "cannot find sources ($ac_unique_file) in $srcdir" -fi -ac_msg="sources are in $srcdir, but \`cd $srcdir' does not work" -ac_abs_confdir=`( - cd "$srcdir" && test -r "./$ac_unique_file" || as_fn_error $? "$ac_msg" - pwd)` -# When building in place, set srcdir=. -if test "$ac_abs_confdir" = "$ac_pwd"; then - srcdir=. -fi -# Remove unnecessary trailing slashes from srcdir. -# Double slashes in file names in object file debugging info -# mess up M-x gdb in Emacs. -case $srcdir in -*/) srcdir=`expr "X$srcdir" : 'X\(.*[^/]\)' \| "X$srcdir" : 'X\(.*\)'`;; -esac -for ac_var in $ac_precious_vars; do - eval ac_env_${ac_var}_set=\${${ac_var}+set} - eval ac_env_${ac_var}_value=\$${ac_var} - eval ac_cv_env_${ac_var}_set=\${${ac_var}+set} - eval ac_cv_env_${ac_var}_value=\$${ac_var} -done - -# -# Report the --help message. -# -if test "$ac_init_help" = "long"; then - # Omit some internal or obsolete options to make the list less imposing. - # This message is too long to be a string in the A/UX 3.1 sh. - cat <<_ACEOF -\`configure' configures autohello 1.1 to adapt to many kinds of systems. - -Usage: $0 [OPTION]... [VAR=VALUE]... - -To assign environment variables (e.g., CC, CFLAGS...), specify them as -VAR=VALUE. See below for descriptions of some of the useful variables. - -Defaults for the options are specified in brackets. - -Configuration: - -h, --help display this help and exit - --help=short display options specific to this package - --help=recursive display the short help of all the included packages - -V, --version display version information and exit - -q, --quiet, --silent do not print \`checking ...' messages - --cache-file=FILE cache test results in FILE [disabled] - -C, --config-cache alias for \`--cache-file=config.cache' - -n, --no-create do not create output files - --srcdir=DIR find the sources in DIR [configure dir or \`..'] - -Installation directories: - --prefix=PREFIX install architecture-independent files in PREFIX - @<:@@S|@ac_default_prefix@:>@ - --exec-prefix=EPREFIX install architecture-dependent files in EPREFIX - @<:@PREFIX@:>@ - -By default, \`make install' will install all the files in -\`$ac_default_prefix/bin', \`$ac_default_prefix/lib' etc. You can specify -an installation prefix other than \`$ac_default_prefix' using \`--prefix', -for instance \`--prefix=\$HOME'. - -For better control, use the options below. - -Fine tuning of the installation directories: - --bindir=DIR user executables [EPREFIX/bin] - --sbindir=DIR system admin executables [EPREFIX/sbin] - --libexecdir=DIR program executables [EPREFIX/libexec] - --sysconfdir=DIR read-only single-machine data [PREFIX/etc] - --sharedstatedir=DIR modifiable architecture-independent data [PREFIX/com] - --localstatedir=DIR modifiable single-machine data [PREFIX/var] - --libdir=DIR object code libraries [EPREFIX/lib] - --includedir=DIR C header files [PREFIX/include] - --oldincludedir=DIR C header files for non-gcc [/usr/include] - --datarootdir=DIR read-only arch.-independent data root [PREFIX/share] - --datadir=DIR read-only architecture-independent data [DATAROOTDIR] - --infodir=DIR info documentation [DATAROOTDIR/info] - --localedir=DIR locale-dependent data [DATAROOTDIR/locale] - --mandir=DIR man documentation [DATAROOTDIR/man] - --docdir=DIR documentation root @<:@DATAROOTDIR/doc/autohello@:>@ - --htmldir=DIR html documentation [DOCDIR] - --dvidir=DIR dvi documentation [DOCDIR] - --pdfdir=DIR pdf documentation [DOCDIR] - --psdir=DIR ps documentation [DOCDIR] -_ACEOF - - cat <<\_ACEOF - -Program names: - --program-prefix=PREFIX prepend PREFIX to installed program names - --program-suffix=SUFFIX append SUFFIX to installed program names - --program-transform-name=PROGRAM run sed PROGRAM on installed program names -_ACEOF -fi - -if test -n "$ac_init_help"; then - case $ac_init_help in - short | recursive ) echo "Configuration of autohello 1.1:";; - esac - cat <<\_ACEOF - -Optional Features: - --disable-option-checking ignore unrecognized --enable/--with options - --disable-FEATURE do not include FEATURE (same as --enable-FEATURE=no) - --enable-FEATURE[=ARG] include FEATURE [ARG=yes] - --enable-silent-rules less verbose build output (undo: "make V=1") - --disable-silent-rules verbose build output (undo: "make V=0") - --enable-dependency-tracking - do not reject slow dependency extractors - --disable-dependency-tracking - speeds up one-time build - -Some influential environment variables: - CC C compiler command - CFLAGS C compiler flags - LDFLAGS linker flags, e.g. -L if you have libraries in a - nonstandard directory - LIBS libraries to pass to the linker, e.g. -l - CPPFLAGS (Objective) C/C++ preprocessor flags, e.g. -I if - you have headers in a nonstandard directory - -Use these variables to override the choices made by `configure' or to help -it to find libraries and programs with nonstandard names/locations. - -Report bugs to . -_ACEOF -ac_status=$? -fi - -if test "$ac_init_help" = "recursive"; then - # If there are subdirs, report their specific --help. - for ac_dir in : $ac_subdirs_all; do test "x$ac_dir" = x: && continue - test -d "$ac_dir" || - { cd "$srcdir" && ac_pwd=`pwd` && srcdir=. && test -d "$ac_dir"; } || - continue - ac_builddir=. - -case "$ac_dir" in -.) ac_dir_suffix= ac_top_builddir_sub=. ac_top_build_prefix= ;; -*) - ac_dir_suffix=/`$as_echo "$ac_dir" | sed 's|^\.[\\/]||'` - # A ".." for each directory in $ac_dir_suffix. - ac_top_builddir_sub=`$as_echo "$ac_dir_suffix" | sed 's|/[^\\/]*|/..|g;s|/||'` - case $ac_top_builddir_sub in - "") ac_top_builddir_sub=. ac_top_build_prefix= ;; - *) ac_top_build_prefix=$ac_top_builddir_sub/ ;; - esac ;; -esac -ac_abs_top_builddir=$ac_pwd -ac_abs_builddir=$ac_pwd$ac_dir_suffix -# for backward compatibility: -ac_top_builddir=$ac_top_build_prefix - -case $srcdir in - .) # We are building in place. - ac_srcdir=. - ac_top_srcdir=$ac_top_builddir_sub - ac_abs_top_srcdir=$ac_pwd ;; - [\\/]* | ?:[\\/]* ) # Absolute name. - ac_srcdir=$srcdir$ac_dir_suffix; - ac_top_srcdir=$srcdir - ac_abs_top_srcdir=$srcdir ;; - *) # Relative name. - ac_srcdir=$ac_top_build_prefix$srcdir$ac_dir_suffix - ac_top_srcdir=$ac_top_build_prefix$srcdir - ac_abs_top_srcdir=$ac_pwd/$srcdir ;; -esac -ac_abs_srcdir=$ac_abs_top_srcdir$ac_dir_suffix - - cd "$ac_dir" || { ac_status=$?; continue; } - # Check for guested configure. - if test -f "$ac_srcdir/configure.gnu"; then - echo && - $SHELL "$ac_srcdir/configure.gnu" --help=recursive - elif test -f "$ac_srcdir/configure"; then - echo && - $SHELL "$ac_srcdir/configure" --help=recursive - else - $as_echo "$as_me: WARNING: no configuration information is in $ac_dir" >&2 - fi || ac_status=$? - cd "$ac_pwd" || { ac_status=$?; break; } - done -fi - -test -n "$ac_init_help" && exit $ac_status -if $ac_init_version; then - cat <<\_ACEOF -autohello configure 1.1 -generated by GNU Autoconf 2.69 - -Copyright (C) 2012 Free Software Foundation, Inc. -This configure script is free software; the Free Software Foundation -gives unlimited permission to copy, distribute and modify it. -_ACEOF - exit -fi - -## ------------------------ ## -## Autoconf initialization. ## -## ------------------------ ## - -@%:@ ac_fn_c_try_compile LINENO -@%:@ -------------------------- -@%:@ Try to compile conftest.@S|@ac_ext, and return whether this succeeded. -ac_fn_c_try_compile () -{ - as_lineno=${as_lineno-"$1"} as_lineno_stack=as_lineno_stack=$as_lineno_stack - rm -f conftest.$ac_objext - if { { ac_try="$ac_compile" -case "(($ac_try" in - *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; - *) ac_try_echo=$ac_try;; -esac -eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\"" -$as_echo "$ac_try_echo"; } >&5 - (eval "$ac_compile") 2>conftest.err - ac_status=$? - if test -s conftest.err; then - grep -v '^ *+' conftest.err >conftest.er1 - cat conftest.er1 >&5 - mv -f conftest.er1 conftest.err - fi - $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 - test $ac_status = 0; } && { - test -z "$ac_c_werror_flag" || - test ! -s conftest.err - } && test -s conftest.$ac_objext; then : - ac_retval=0 -else - $as_echo "$as_me: failed program was:" >&5 -sed 's/^/| /' conftest.$ac_ext >&5 - - ac_retval=1 -fi - eval $as_lineno_stack; ${as_lineno_stack:+:} unset as_lineno - as_fn_set_status $ac_retval - -} @%:@ ac_fn_c_try_compile -cat >config.log <<_ACEOF -This file contains any messages produced by compilers while -running configure, to aid debugging if configure makes a mistake. - -It was created by autohello $as_me 1.1, which was -generated by GNU Autoconf 2.69. Invocation command line was - - $ $0 $@ - -_ACEOF -exec 5>>config.log -{ -cat <<_ASUNAME -## --------- ## -## Platform. ## -## --------- ## - -hostname = `(hostname || uname -n) 2>/dev/null | sed 1q` -uname -m = `(uname -m) 2>/dev/null || echo unknown` -uname -r = `(uname -r) 2>/dev/null || echo unknown` -uname -s = `(uname -s) 2>/dev/null || echo unknown` -uname -v = `(uname -v) 2>/dev/null || echo unknown` - -/usr/bin/uname -p = `(/usr/bin/uname -p) 2>/dev/null || echo unknown` -/bin/uname -X = `(/bin/uname -X) 2>/dev/null || echo unknown` - -/bin/arch = `(/bin/arch) 2>/dev/null || echo unknown` -/usr/bin/arch -k = `(/usr/bin/arch -k) 2>/dev/null || echo unknown` -/usr/convex/getsysinfo = `(/usr/convex/getsysinfo) 2>/dev/null || echo unknown` -/usr/bin/hostinfo = `(/usr/bin/hostinfo) 2>/dev/null || echo unknown` -/bin/machine = `(/bin/machine) 2>/dev/null || echo unknown` -/usr/bin/oslevel = `(/usr/bin/oslevel) 2>/dev/null || echo unknown` -/bin/universe = `(/bin/universe) 2>/dev/null || echo unknown` - -_ASUNAME - -as_save_IFS=$IFS; IFS=$PATH_SEPARATOR -for as_dir in $PATH -do - IFS=$as_save_IFS - test -z "$as_dir" && as_dir=. - $as_echo "PATH: $as_dir" - done -IFS=$as_save_IFS - -} >&5 - -cat >&5 <<_ACEOF - - -## ----------- ## -## Core tests. ## -## ----------- ## - -_ACEOF - - -# Keep a trace of the command line. -# Strip out --no-create and --no-recursion so they do not pile up. -# Strip out --silent because we don't want to record it for future runs. -# Also quote any args containing shell meta-characters. -# Make two passes to allow for proper duplicate-argument suppression. -ac_configure_args= -ac_configure_args0= -ac_configure_args1= -ac_must_keep_next=false -for ac_pass in 1 2 -do - for ac_arg - do - case $ac_arg in - -no-create | --no-c* | -n | -no-recursion | --no-r*) continue ;; - -q | -quiet | --quiet | --quie | --qui | --qu | --q \ - | -silent | --silent | --silen | --sile | --sil) - continue ;; - *\'*) - ac_arg=`$as_echo "$ac_arg" | sed "s/'/'\\\\\\\\''/g"` ;; - esac - case $ac_pass in - 1) as_fn_append ac_configure_args0 " '$ac_arg'" ;; - 2) - as_fn_append ac_configure_args1 " '$ac_arg'" - if test $ac_must_keep_next = true; then - ac_must_keep_next=false # Got value, back to normal. - else - case $ac_arg in - *=* | --config-cache | -C | -disable-* | --disable-* \ - | -enable-* | --enable-* | -gas | --g* | -nfp | --nf* \ - | -q | -quiet | --q* | -silent | --sil* | -v | -verb* \ - | -with-* | --with-* | -without-* | --without-* | --x) - case "$ac_configure_args0 " in - "$ac_configure_args1"*" '$ac_arg' "* ) continue ;; - esac - ;; - -* ) ac_must_keep_next=true ;; - esac - fi - as_fn_append ac_configure_args " '$ac_arg'" - ;; - esac - done -done -{ ac_configure_args0=; unset ac_configure_args0;} -{ ac_configure_args1=; unset ac_configure_args1;} - -# When interrupted or exit'd, cleanup temporary files, and complete -# config.log. We remove comments because anyway the quotes in there -# would cause problems or look ugly. -# WARNING: Use '\'' to represent an apostrophe within the trap. -# WARNING: Do not start the trap code with a newline, due to a FreeBSD 4.0 bug. -trap 'exit_status=$? - # Save into config.log some information that might help in debugging. - { - echo - - $as_echo "## ---------------- ## -## Cache variables. ## -## ---------------- ##" - echo - # The following way of writing the cache mishandles newlines in values, -( - for ac_var in `(set) 2>&1 | sed -n '\''s/^\([a-zA-Z_][a-zA-Z0-9_]*\)=.*/\1/p'\''`; do - eval ac_val=\$$ac_var - case $ac_val in #( - *${as_nl}*) - case $ac_var in #( - *_cv_*) { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: cache variable $ac_var contains a newline" >&5 -$as_echo "$as_me: WARNING: cache variable $ac_var contains a newline" >&2;} ;; - esac - case $ac_var in #( - _ | IFS | as_nl) ;; #( - BASH_ARGV | BASH_SOURCE) eval $ac_var= ;; #( - *) { eval $ac_var=; unset $ac_var;} ;; - esac ;; - esac - done - (set) 2>&1 | - case $as_nl`(ac_space='\'' '\''; set) 2>&1` in #( - *${as_nl}ac_space=\ *) - sed -n \ - "s/'\''/'\''\\\\'\'''\''/g; - s/^\\([_$as_cr_alnum]*_cv_[_$as_cr_alnum]*\\)=\\(.*\\)/\\1='\''\\2'\''/p" - ;; #( - *) - sed -n "/^[_$as_cr_alnum]*_cv_[_$as_cr_alnum]*=/p" - ;; - esac | - sort -) - echo - - $as_echo "## ----------------- ## -## Output variables. ## -## ----------------- ##" - echo - for ac_var in $ac_subst_vars - do - eval ac_val=\$$ac_var - case $ac_val in - *\'\''*) ac_val=`$as_echo "$ac_val" | sed "s/'\''/'\''\\\\\\\\'\'''\''/g"`;; - esac - $as_echo "$ac_var='\''$ac_val'\''" - done | sort - echo - - if test -n "$ac_subst_files"; then - $as_echo "## ------------------- ## -## File substitutions. ## -## ------------------- ##" - echo - for ac_var in $ac_subst_files - do - eval ac_val=\$$ac_var - case $ac_val in - *\'\''*) ac_val=`$as_echo "$ac_val" | sed "s/'\''/'\''\\\\\\\\'\'''\''/g"`;; - esac - $as_echo "$ac_var='\''$ac_val'\''" - done | sort - echo - fi - - if test -s confdefs.h; then - $as_echo "## ----------- ## -## confdefs.h. ## -## ----------- ##" - echo - cat confdefs.h - echo - fi - test "$ac_signal" != 0 && - $as_echo "$as_me: caught signal $ac_signal" - $as_echo "$as_me: exit $exit_status" - } >&5 - rm -f core *.core core.conftest.* && - rm -f -r conftest* confdefs* conf$$* $ac_clean_files && - exit $exit_status -' 0 -for ac_signal in 1 2 13 15; do - trap 'ac_signal='$ac_signal'; as_fn_exit 1' $ac_signal -done -ac_signal=0 - -# confdefs.h avoids OS command line length limits that DEFS can exceed. -rm -f -r conftest* confdefs.h - -$as_echo "/* confdefs.h */" > confdefs.h - -# Predefined preprocessor variables. - -cat >>confdefs.h <<_ACEOF -@%:@define PACKAGE_NAME "$PACKAGE_NAME" -_ACEOF - -cat >>confdefs.h <<_ACEOF -@%:@define PACKAGE_TARNAME "$PACKAGE_TARNAME" -_ACEOF - -cat >>confdefs.h <<_ACEOF -@%:@define PACKAGE_VERSION "$PACKAGE_VERSION" -_ACEOF - -cat >>confdefs.h <<_ACEOF -@%:@define PACKAGE_STRING "$PACKAGE_STRING" -_ACEOF - -cat >>confdefs.h <<_ACEOF -@%:@define PACKAGE_BUGREPORT "$PACKAGE_BUGREPORT" -_ACEOF - -cat >>confdefs.h <<_ACEOF -@%:@define PACKAGE_URL "$PACKAGE_URL" -_ACEOF - - -# Let the site file select an alternate cache file if it wants to. -# Prefer an explicitly selected file to automatically selected ones. -ac_site_file1=NONE -ac_site_file2=NONE -if test -n "$CONFIG_SITE"; then - # We do not want a PATH search for config.site. - case $CONFIG_SITE in @%:@(( - -*) ac_site_file1=./$CONFIG_SITE;; - */*) ac_site_file1=$CONFIG_SITE;; - *) ac_site_file1=./$CONFIG_SITE;; - esac -elif test "x$prefix" != xNONE; then - ac_site_file1=$prefix/share/config.site - ac_site_file2=$prefix/etc/config.site -else - ac_site_file1=$ac_default_prefix/share/config.site - ac_site_file2=$ac_default_prefix/etc/config.site -fi -for ac_site_file in "$ac_site_file1" "$ac_site_file2" -do - test "x$ac_site_file" = xNONE && continue - if test /dev/null != "$ac_site_file" && test -r "$ac_site_file"; then - { $as_echo "$as_me:${as_lineno-$LINENO}: loading site script $ac_site_file" >&5 -$as_echo "$as_me: loading site script $ac_site_file" >&6;} - sed 's/^/| /' "$ac_site_file" >&5 - . "$ac_site_file" \ - || { { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5 -$as_echo "$as_me: error: in \`$ac_pwd':" >&2;} -as_fn_error $? "failed to load site script $ac_site_file -See \`config.log' for more details" "$LINENO" 5; } - fi -done - -if test -r "$cache_file"; then - # Some versions of bash will fail to source /dev/null (special files - # actually), so we avoid doing that. DJGPP emulates it as a regular file. - if test /dev/null != "$cache_file" && test -f "$cache_file"; then - { $as_echo "$as_me:${as_lineno-$LINENO}: loading cache $cache_file" >&5 -$as_echo "$as_me: loading cache $cache_file" >&6;} - case $cache_file in - [\\/]* | ?:[\\/]* ) . "$cache_file";; - *) . "./$cache_file";; - esac - fi -else - { $as_echo "$as_me:${as_lineno-$LINENO}: creating cache $cache_file" >&5 -$as_echo "$as_me: creating cache $cache_file" >&6;} - >$cache_file -fi - -# Check that the precious variables saved in the cache have kept the same -# value. -ac_cache_corrupted=false -for ac_var in $ac_precious_vars; do - eval ac_old_set=\$ac_cv_env_${ac_var}_set - eval ac_new_set=\$ac_env_${ac_var}_set - eval ac_old_val=\$ac_cv_env_${ac_var}_value - eval ac_new_val=\$ac_env_${ac_var}_value - case $ac_old_set,$ac_new_set in - set,) - { $as_echo "$as_me:${as_lineno-$LINENO}: error: \`$ac_var' was set to \`$ac_old_val' in the previous run" >&5 -$as_echo "$as_me: error: \`$ac_var' was set to \`$ac_old_val' in the previous run" >&2;} - ac_cache_corrupted=: ;; - ,set) - { $as_echo "$as_me:${as_lineno-$LINENO}: error: \`$ac_var' was not set in the previous run" >&5 -$as_echo "$as_me: error: \`$ac_var' was not set in the previous run" >&2;} - ac_cache_corrupted=: ;; - ,);; - *) - if test "x$ac_old_val" != "x$ac_new_val"; then - # differences in whitespace do not lead to failure. - ac_old_val_w=`echo x $ac_old_val` - ac_new_val_w=`echo x $ac_new_val` - if test "$ac_old_val_w" != "$ac_new_val_w"; then - { $as_echo "$as_me:${as_lineno-$LINENO}: error: \`$ac_var' has changed since the previous run:" >&5 -$as_echo "$as_me: error: \`$ac_var' has changed since the previous run:" >&2;} - ac_cache_corrupted=: - else - { $as_echo "$as_me:${as_lineno-$LINENO}: warning: ignoring whitespace changes in \`$ac_var' since the previous run:" >&5 -$as_echo "$as_me: warning: ignoring whitespace changes in \`$ac_var' since the previous run:" >&2;} - eval $ac_var=\$ac_old_val - fi - { $as_echo "$as_me:${as_lineno-$LINENO}: former value: \`$ac_old_val'" >&5 -$as_echo "$as_me: former value: \`$ac_old_val'" >&2;} - { $as_echo "$as_me:${as_lineno-$LINENO}: current value: \`$ac_new_val'" >&5 -$as_echo "$as_me: current value: \`$ac_new_val'" >&2;} - fi;; - esac - # Pass precious variables to config.status. - if test "$ac_new_set" = set; then - case $ac_new_val in - *\'*) ac_arg=$ac_var=`$as_echo "$ac_new_val" | sed "s/'/'\\\\\\\\''/g"` ;; - *) ac_arg=$ac_var=$ac_new_val ;; - esac - case " $ac_configure_args " in - *" '$ac_arg' "*) ;; # Avoid dups. Use of quotes ensures accuracy. - *) as_fn_append ac_configure_args " '$ac_arg'" ;; - esac - fi -done -if $ac_cache_corrupted; then - { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5 -$as_echo "$as_me: error: in \`$ac_pwd':" >&2;} - { $as_echo "$as_me:${as_lineno-$LINENO}: error: changes in the environment can compromise the build" >&5 -$as_echo "$as_me: error: changes in the environment can compromise the build" >&2;} - as_fn_error $? "run \`make distclean' and/or \`rm $cache_file' and start over" "$LINENO" 5 -fi -## -------------------- ## -## Main body of script. ## -## -------------------- ## - -ac_ext=c -ac_cpp='$CPP $CPPFLAGS' -ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5' -ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5' -ac_compiler_gnu=$ac_cv_c_compiler_gnu - - -am__api_version='1.14' - -ac_aux_dir= -for ac_dir in "$srcdir" "$srcdir/.." "$srcdir/../.."; do - if test -f "$ac_dir/install-sh"; then - ac_aux_dir=$ac_dir - ac_install_sh="$ac_aux_dir/install-sh -c" - break - elif test -f "$ac_dir/install.sh"; then - ac_aux_dir=$ac_dir - ac_install_sh="$ac_aux_dir/install.sh -c" - break - elif test -f "$ac_dir/shtool"; then - ac_aux_dir=$ac_dir - ac_install_sh="$ac_aux_dir/shtool install -c" - break - fi -done -if test -z "$ac_aux_dir"; then - as_fn_error $? "cannot find install-sh, install.sh, or shtool in \"$srcdir\" \"$srcdir/..\" \"$srcdir/../..\"" "$LINENO" 5 -fi - -# These three variables are undocumented and unsupported, -# and are intended to be withdrawn in a future Autoconf release. -# They can cause serious problems if a builder's source tree is in a directory -# whose full name contains unusual characters. -ac_config_guess="$SHELL $ac_aux_dir/config.guess" # Please don't use this var. -ac_config_sub="$SHELL $ac_aux_dir/config.sub" # Please don't use this var. -ac_configure="$SHELL $ac_aux_dir/configure" # Please don't use this var. - - -# Find a good install program. We prefer a C program (faster), -# so one script is as good as another. But avoid the broken or -# incompatible versions: -# SysV /etc/install, /usr/sbin/install -# SunOS /usr/etc/install -# IRIX /sbin/install -# AIX /bin/install -# AmigaOS /C/install, which installs bootblocks on floppy discs -# AIX 4 /usr/bin/installbsd, which doesn't work without a -g flag -# AFS /usr/afsws/bin/install, which mishandles nonexistent args -# SVR4 /usr/ucb/install, which tries to use the nonexistent group "staff" -# OS/2's system install, which has a completely different semantic -# ./install, which can be erroneously created by make from ./install.sh. -# Reject install programs that cannot install multiple files. -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for a BSD-compatible install" >&5 -$as_echo_n "checking for a BSD-compatible install... " >&6; } -if test -z "$INSTALL"; then -if ${ac_cv_path_install+:} false; then : - $as_echo_n "(cached) " >&6 -else - as_save_IFS=$IFS; IFS=$PATH_SEPARATOR -for as_dir in $PATH -do - IFS=$as_save_IFS - test -z "$as_dir" && as_dir=. - # Account for people who put trailing slashes in PATH elements. -case $as_dir/ in @%:@(( - ./ | .// | /[cC]/* | \ - /etc/* | /usr/sbin/* | /usr/etc/* | /sbin/* | /usr/afsws/bin/* | \ - ?:[\\/]os2[\\/]install[\\/]* | ?:[\\/]OS2[\\/]INSTALL[\\/]* | \ - /usr/ucb/* ) ;; - *) - # OSF1 and SCO ODT 3.0 have their own names for install. - # Don't use installbsd from OSF since it installs stuff as root - # by default. - for ac_prog in ginstall scoinst install; do - for ac_exec_ext in '' $ac_executable_extensions; do - if as_fn_executable_p "$as_dir/$ac_prog$ac_exec_ext"; then - if test $ac_prog = install && - grep dspmsg "$as_dir/$ac_prog$ac_exec_ext" >/dev/null 2>&1; then - # AIX install. It has an incompatible calling convention. - : - elif test $ac_prog = install && - grep pwplus "$as_dir/$ac_prog$ac_exec_ext" >/dev/null 2>&1; then - # program-specific install script used by HP pwplus--don't use. - : - else - rm -rf conftest.one conftest.two conftest.dir - echo one > conftest.one - echo two > conftest.two - mkdir conftest.dir - if "$as_dir/$ac_prog$ac_exec_ext" -c conftest.one conftest.two "`pwd`/conftest.dir" && - test -s conftest.one && test -s conftest.two && - test -s conftest.dir/conftest.one && - test -s conftest.dir/conftest.two - then - ac_cv_path_install="$as_dir/$ac_prog$ac_exec_ext -c" - break 3 - fi - fi - fi - done - done - ;; -esac - - done -IFS=$as_save_IFS - -rm -rf conftest.one conftest.two conftest.dir - -fi - if test "${ac_cv_path_install+set}" = set; then - INSTALL=$ac_cv_path_install - else - # As a last resort, use the slow shell script. Don't cache a - # value for INSTALL within a source directory, because that will - # break other packages using the cache if that directory is - # removed, or if the value is a relative name. - INSTALL=$ac_install_sh - fi -fi -{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $INSTALL" >&5 -$as_echo "$INSTALL" >&6; } - -# Use test -z because SunOS4 sh mishandles braces in ${var-val}. -# It thinks the first close brace ends the variable substitution. -test -z "$INSTALL_PROGRAM" && INSTALL_PROGRAM='${INSTALL}' - -test -z "$INSTALL_SCRIPT" && INSTALL_SCRIPT='${INSTALL}' - -test -z "$INSTALL_DATA" && INSTALL_DATA='${INSTALL} -m 644' - -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether build environment is sane" >&5 -$as_echo_n "checking whether build environment is sane... " >&6; } -# Reject unsafe characters in $srcdir or the absolute working directory -# name. Accept space and tab only in the latter. -am_lf=' -' -case `pwd` in - *[\\\"\#\$\&\'\`$am_lf]*) - as_fn_error $? "unsafe absolute working directory name" "$LINENO" 5;; -esac -case $srcdir in - *[\\\"\#\$\&\'\`$am_lf\ \ ]*) - as_fn_error $? "unsafe srcdir value: '$srcdir'" "$LINENO" 5;; -esac - -# Do 'set' in a subshell so we don't clobber the current shell's -# arguments. Must try -L first in case configure is actually a -# symlink; some systems play weird games with the mod time of symlinks -# (eg FreeBSD returns the mod time of the symlink's containing -# directory). -if ( - am_has_slept=no - for am_try in 1 2; do - echo "timestamp, slept: $am_has_slept" > conftest.file - set X `ls -Lt "$srcdir/configure" conftest.file 2> /dev/null` - if test "$*" = "X"; then - # -L didn't work. - set X `ls -t "$srcdir/configure" conftest.file` - fi - if test "$*" != "X $srcdir/configure conftest.file" \ - && test "$*" != "X conftest.file $srcdir/configure"; then - - # If neither matched, then we have a broken ls. This can happen - # if, for instance, CONFIG_SHELL is bash and it inherits a - # broken ls alias from the environment. This has actually - # happened. Such a system could not be considered "sane". - as_fn_error $? "ls -t appears to fail. Make sure there is not a broken - alias in your environment" "$LINENO" 5 - fi - if test "$2" = conftest.file || test $am_try -eq 2; then - break - fi - # Just in case. - sleep 1 - am_has_slept=yes - done - test "$2" = conftest.file - ) -then - # Ok. - : -else - as_fn_error $? "newly created file is older than distributed files! -Check your system clock" "$LINENO" 5 -fi -{ $as_echo "$as_me:${as_lineno-$LINENO}: result: yes" >&5 -$as_echo "yes" >&6; } -# If we didn't sleep, we still need to ensure time stamps of config.status and -# generated files are strictly newer. -am_sleep_pid= -if grep 'slept: no' conftest.file >/dev/null 2>&1; then - ( sleep 1 ) & - am_sleep_pid=$! -fi - -rm -f conftest.file - -test "$program_prefix" != NONE && - program_transform_name="s&^&$program_prefix&;$program_transform_name" -# Use a double $ so make ignores it. -test "$program_suffix" != NONE && - program_transform_name="s&\$&$program_suffix&;$program_transform_name" -# Double any \ or $. -# By default was `s,x,x', remove it if useless. -ac_script='s/[\\$]/&&/g;s/;s,x,x,$//' -program_transform_name=`$as_echo "$program_transform_name" | sed "$ac_script"` - -# expand $ac_aux_dir to an absolute path -am_aux_dir=`cd $ac_aux_dir && pwd` - -if test x"${MISSING+set}" != xset; then - case $am_aux_dir in - *\ * | *\ *) - MISSING="\${SHELL} \"$am_aux_dir/missing\"" ;; - *) - MISSING="\${SHELL} $am_aux_dir/missing" ;; - esac -fi -# Use eval to expand $SHELL -if eval "$MISSING --is-lightweight"; then - am_missing_run="$MISSING " -else - am_missing_run= - { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: 'missing' script is too old or missing" >&5 -$as_echo "$as_me: WARNING: 'missing' script is too old or missing" >&2;} -fi - -if test x"${install_sh}" != xset; then - case $am_aux_dir in - *\ * | *\ *) - install_sh="\${SHELL} '$am_aux_dir/install-sh'" ;; - *) - install_sh="\${SHELL} $am_aux_dir/install-sh" - esac -fi - -# Installed binaries are usually stripped using 'strip' when the user -# run "make install-strip". However 'strip' might not be the right -# tool to use in cross-compilation environments, therefore Automake -# will honor the 'STRIP' environment variable to overrule this program. -if test "$cross_compiling" != no; then - if test -n "$ac_tool_prefix"; then - # Extract the first word of "${ac_tool_prefix}strip", so it can be a program name with args. -set dummy ${ac_tool_prefix}strip; ac_word=$2 -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 -$as_echo_n "checking for $ac_word... " >&6; } -if ${ac_cv_prog_STRIP+:} false; then : - $as_echo_n "(cached) " >&6 -else - if test -n "$STRIP"; then - ac_cv_prog_STRIP="$STRIP" # Let the user override the test. -else -as_save_IFS=$IFS; IFS=$PATH_SEPARATOR -for as_dir in $PATH -do - IFS=$as_save_IFS - test -z "$as_dir" && as_dir=. - for ac_exec_ext in '' $ac_executable_extensions; do - if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then - ac_cv_prog_STRIP="${ac_tool_prefix}strip" - $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 - break 2 - fi -done - done -IFS=$as_save_IFS - -fi -fi -STRIP=$ac_cv_prog_STRIP -if test -n "$STRIP"; then - { $as_echo "$as_me:${as_lineno-$LINENO}: result: $STRIP" >&5 -$as_echo "$STRIP" >&6; } -else - { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 -$as_echo "no" >&6; } -fi - - -fi -if test -z "$ac_cv_prog_STRIP"; then - ac_ct_STRIP=$STRIP - # Extract the first word of "strip", so it can be a program name with args. -set dummy strip; ac_word=$2 -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 -$as_echo_n "checking for $ac_word... " >&6; } -if ${ac_cv_prog_ac_ct_STRIP+:} false; then : - $as_echo_n "(cached) " >&6 -else - if test -n "$ac_ct_STRIP"; then - ac_cv_prog_ac_ct_STRIP="$ac_ct_STRIP" # Let the user override the test. -else -as_save_IFS=$IFS; IFS=$PATH_SEPARATOR -for as_dir in $PATH -do - IFS=$as_save_IFS - test -z "$as_dir" && as_dir=. - for ac_exec_ext in '' $ac_executable_extensions; do - if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then - ac_cv_prog_ac_ct_STRIP="strip" - $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 - break 2 - fi -done - done -IFS=$as_save_IFS - -fi -fi -ac_ct_STRIP=$ac_cv_prog_ac_ct_STRIP -if test -n "$ac_ct_STRIP"; then - { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_ct_STRIP" >&5 -$as_echo "$ac_ct_STRIP" >&6; } -else - { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 -$as_echo "no" >&6; } -fi - - if test "x$ac_ct_STRIP" = x; then - STRIP=":" - else - case $cross_compiling:$ac_tool_warned in -yes:) -{ $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5 -$as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;} -ac_tool_warned=yes ;; -esac - STRIP=$ac_ct_STRIP - fi -else - STRIP="$ac_cv_prog_STRIP" -fi - -fi -INSTALL_STRIP_PROGRAM="\$(install_sh) -c -s" - -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for a thread-safe mkdir -p" >&5 -$as_echo_n "checking for a thread-safe mkdir -p... " >&6; } -if test -z "$MKDIR_P"; then - if ${ac_cv_path_mkdir+:} false; then : - $as_echo_n "(cached) " >&6 -else - as_save_IFS=$IFS; IFS=$PATH_SEPARATOR -for as_dir in $PATH$PATH_SEPARATOR/opt/sfw/bin -do - IFS=$as_save_IFS - test -z "$as_dir" && as_dir=. - for ac_prog in mkdir gmkdir; do - for ac_exec_ext in '' $ac_executable_extensions; do - as_fn_executable_p "$as_dir/$ac_prog$ac_exec_ext" || continue - case `"$as_dir/$ac_prog$ac_exec_ext" --version 2>&1` in #( - 'mkdir (GNU coreutils) '* | \ - 'mkdir (coreutils) '* | \ - 'mkdir (fileutils) '4.1*) - ac_cv_path_mkdir=$as_dir/$ac_prog$ac_exec_ext - break 3;; - esac - done - done - done -IFS=$as_save_IFS - -fi - - test -d ./--version && rmdir ./--version - if test "${ac_cv_path_mkdir+set}" = set; then - MKDIR_P="$ac_cv_path_mkdir -p" - else - # As a last resort, use the slow shell script. Don't cache a - # value for MKDIR_P within a source directory, because that will - # break other packages using the cache if that directory is - # removed, or if the value is a relative name. - MKDIR_P="$ac_install_sh -d" - fi -fi -{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $MKDIR_P" >&5 -$as_echo "$MKDIR_P" >&6; } - -for ac_prog in gawk mawk nawk awk -do - # Extract the first word of "$ac_prog", so it can be a program name with args. -set dummy $ac_prog; ac_word=$2 -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 -$as_echo_n "checking for $ac_word... " >&6; } -if ${ac_cv_prog_AWK+:} false; then : - $as_echo_n "(cached) " >&6 -else - if test -n "$AWK"; then - ac_cv_prog_AWK="$AWK" # Let the user override the test. -else -as_save_IFS=$IFS; IFS=$PATH_SEPARATOR -for as_dir in $PATH -do - IFS=$as_save_IFS - test -z "$as_dir" && as_dir=. - for ac_exec_ext in '' $ac_executable_extensions; do - if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then - ac_cv_prog_AWK="$ac_prog" - $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 - break 2 - fi -done - done -IFS=$as_save_IFS - -fi -fi -AWK=$ac_cv_prog_AWK -if test -n "$AWK"; then - { $as_echo "$as_me:${as_lineno-$LINENO}: result: $AWK" >&5 -$as_echo "$AWK" >&6; } -else - { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 -$as_echo "no" >&6; } -fi - - - test -n "$AWK" && break -done - -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether ${MAKE-make} sets \$(MAKE)" >&5 -$as_echo_n "checking whether ${MAKE-make} sets \$(MAKE)... " >&6; } -set x ${MAKE-make} -ac_make=`$as_echo "$2" | sed 's/+/p/g; s/[^a-zA-Z0-9_]/_/g'` -if eval \${ac_cv_prog_make_${ac_make}_set+:} false; then : - $as_echo_n "(cached) " >&6 -else - cat >conftest.make <<\_ACEOF -SHELL = /bin/sh -all: - @echo '@@@%%%=$(MAKE)=@@@%%%' -_ACEOF -# GNU make sometimes prints "make[1]: Entering ...", which would confuse us. -case `${MAKE-make} -f conftest.make 2>/dev/null` in - *@@@%%%=?*=@@@%%%*) - eval ac_cv_prog_make_${ac_make}_set=yes;; - *) - eval ac_cv_prog_make_${ac_make}_set=no;; -esac -rm -f conftest.make -fi -if eval test \$ac_cv_prog_make_${ac_make}_set = yes; then - { $as_echo "$as_me:${as_lineno-$LINENO}: result: yes" >&5 -$as_echo "yes" >&6; } - SET_MAKE= -else - { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 -$as_echo "no" >&6; } - SET_MAKE="MAKE=${MAKE-make}" -fi - -rm -rf .tst 2>/dev/null -mkdir .tst 2>/dev/null -if test -d .tst; then - am__leading_dot=. -else - am__leading_dot=_ -fi -rmdir .tst 2>/dev/null - -@%:@ Check whether --enable-silent-rules was given. -if test "${enable_silent_rules+set}" = set; then : - enableval=$enable_silent_rules; -fi - -case $enable_silent_rules in @%:@ ((( - yes) AM_DEFAULT_VERBOSITY=0;; - no) AM_DEFAULT_VERBOSITY=1;; - *) AM_DEFAULT_VERBOSITY=1;; -esac -am_make=${MAKE-make} -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether $am_make supports nested variables" >&5 -$as_echo_n "checking whether $am_make supports nested variables... " >&6; } -if ${am_cv_make_support_nested_variables+:} false; then : - $as_echo_n "(cached) " >&6 -else - if $as_echo 'TRUE=$(BAR$(V)) -BAR0=false -BAR1=true -V=1 -am__doit: - @$(TRUE) -.PHONY: am__doit' | $am_make -f - >/dev/null 2>&1; then - am_cv_make_support_nested_variables=yes -else - am_cv_make_support_nested_variables=no -fi -fi -{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $am_cv_make_support_nested_variables" >&5 -$as_echo "$am_cv_make_support_nested_variables" >&6; } -if test $am_cv_make_support_nested_variables = yes; then - AM_V='$(V)' - AM_DEFAULT_V='$(AM_DEFAULT_VERBOSITY)' -else - AM_V=$AM_DEFAULT_VERBOSITY - AM_DEFAULT_V=$AM_DEFAULT_VERBOSITY -fi -AM_BACKSLASH='\' - -if test "`cd $srcdir && pwd`" != "`pwd`"; then - # Use -I$(srcdir) only when $(srcdir) != ., so that make's output - # is not polluted with repeated "-I." - am__isrc=' -I$(srcdir)' - # test to see if srcdir already configured - if test -f $srcdir/config.status; then - as_fn_error $? "source directory already configured; run \"make distclean\" there first" "$LINENO" 5 - fi -fi - -# test whether we have cygpath -if test -z "$CYGPATH_W"; then - if (cygpath --version) >/dev/null 2>/dev/null; then - CYGPATH_W='cygpath -w' - else - CYGPATH_W=echo - fi -fi - - -# Define the identity of the package. - PACKAGE='autohello' - VERSION='1.1' - - -cat >>confdefs.h <<_ACEOF -@%:@define PACKAGE "$PACKAGE" -_ACEOF - - -cat >>confdefs.h <<_ACEOF -@%:@define VERSION "$VERSION" -_ACEOF - -# Some tools Automake needs. - -ACLOCAL=${ACLOCAL-"${am_missing_run}aclocal-${am__api_version}"} - - -AUTOCONF=${AUTOCONF-"${am_missing_run}autoconf"} - - -AUTOMAKE=${AUTOMAKE-"${am_missing_run}automake-${am__api_version}"} - - -AUTOHEADER=${AUTOHEADER-"${am_missing_run}autoheader"} - - -MAKEINFO=${MAKEINFO-"${am_missing_run}makeinfo"} - -# For better backward compatibility. To be removed once Automake 1.9.x -# dies out for good. For more background, see: -# -# -mkdir_p='$(MKDIR_P)' - -# We need awk for the "check" target. The system "awk" is bad on -# some platforms. -# Always define AMTAR for backward compatibility. Yes, it's still used -# in the wild :-( We should find a proper way to deprecate it ... -AMTAR='$${TAR-tar}' - - -# We'll loop over all known methods to create a tar archive until one works. -_am_tools='gnutar pax cpio none' - -am__tar='$${TAR-tar} chof - "$$tardir"' am__untar='$${TAR-tar} xf -' - - - - - - -# POSIX will say in a future version that running "rm -f" with no argument -# is OK; and we want to be able to make that assumption in our Makefile -# recipes. So use an aggressive probe to check that the usage we want is -# actually supported "in the wild" to an acceptable degree. -# See automake bug#10828. -# To make any issue more visible, cause the running configure to be aborted -# by default if the 'rm' program in use doesn't match our expectations; the -# user can still override this though. -if rm -f && rm -fr && rm -rf; then : OK; else - cat >&2 <<'END' -Oops! - -Your 'rm' program seems unable to run without file operands specified -on the command line, even when the '-f' option is present. This is contrary -to the behaviour of most rm programs out there, and not conforming with -the upcoming POSIX standard: - -Please tell bug-automake@gnu.org about your system, including the value -of your $PATH and any error possibly output before this message. This -can help us improve future automake versions. - -END - if test x"$ACCEPT_INFERIOR_RM_PROGRAM" = x"yes"; then - echo 'Configuration will proceed anyway, since you have set the' >&2 - echo 'ACCEPT_INFERIOR_RM_PROGRAM variable to "yes"' >&2 - echo >&2 - else - cat >&2 <<'END' -Aborting the configuration process, to ensure you take notice of the issue. - -You can download and install GNU coreutils to get an 'rm' implementation -that behaves properly: . - -If you want to complete the configuration process using your problematic -'rm' anyway, export the environment variable ACCEPT_INFERIOR_RM_PROGRAM -to "yes", and re-run configure. - -END - as_fn_error $? "Your 'rm' program is bad, sorry." "$LINENO" 5 - fi -fi - - -ac_config_headers="$ac_config_headers config.h" - - -# Checks for programs. -ac_ext=c -ac_cpp='$CPP $CPPFLAGS' -ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5' -ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5' -ac_compiler_gnu=$ac_cv_c_compiler_gnu -if test -n "$ac_tool_prefix"; then - # Extract the first word of "${ac_tool_prefix}gcc", so it can be a program name with args. -set dummy ${ac_tool_prefix}gcc; ac_word=$2 -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 -$as_echo_n "checking for $ac_word... " >&6; } -if ${ac_cv_prog_CC+:} false; then : - $as_echo_n "(cached) " >&6 -else - if test -n "$CC"; then - ac_cv_prog_CC="$CC" # Let the user override the test. -else -as_save_IFS=$IFS; IFS=$PATH_SEPARATOR -for as_dir in $PATH -do - IFS=$as_save_IFS - test -z "$as_dir" && as_dir=. - for ac_exec_ext in '' $ac_executable_extensions; do - if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then - ac_cv_prog_CC="${ac_tool_prefix}gcc" - $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 - break 2 - fi -done - done -IFS=$as_save_IFS - -fi -fi -CC=$ac_cv_prog_CC -if test -n "$CC"; then - { $as_echo "$as_me:${as_lineno-$LINENO}: result: $CC" >&5 -$as_echo "$CC" >&6; } -else - { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 -$as_echo "no" >&6; } -fi - - -fi -if test -z "$ac_cv_prog_CC"; then - ac_ct_CC=$CC - # Extract the first word of "gcc", so it can be a program name with args. -set dummy gcc; ac_word=$2 -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 -$as_echo_n "checking for $ac_word... " >&6; } -if ${ac_cv_prog_ac_ct_CC+:} false; then : - $as_echo_n "(cached) " >&6 -else - if test -n "$ac_ct_CC"; then - ac_cv_prog_ac_ct_CC="$ac_ct_CC" # Let the user override the test. -else -as_save_IFS=$IFS; IFS=$PATH_SEPARATOR -for as_dir in $PATH -do - IFS=$as_save_IFS - test -z "$as_dir" && as_dir=. - for ac_exec_ext in '' $ac_executable_extensions; do - if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then - ac_cv_prog_ac_ct_CC="gcc" - $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 - break 2 - fi -done - done -IFS=$as_save_IFS - -fi -fi -ac_ct_CC=$ac_cv_prog_ac_ct_CC -if test -n "$ac_ct_CC"; then - { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_ct_CC" >&5 -$as_echo "$ac_ct_CC" >&6; } -else - { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 -$as_echo "no" >&6; } -fi - - if test "x$ac_ct_CC" = x; then - CC="" - else - case $cross_compiling:$ac_tool_warned in -yes:) -{ $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5 -$as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;} -ac_tool_warned=yes ;; -esac - CC=$ac_ct_CC - fi -else - CC="$ac_cv_prog_CC" -fi - -if test -z "$CC"; then - if test -n "$ac_tool_prefix"; then - # Extract the first word of "${ac_tool_prefix}cc", so it can be a program name with args. -set dummy ${ac_tool_prefix}cc; ac_word=$2 -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 -$as_echo_n "checking for $ac_word... " >&6; } -if ${ac_cv_prog_CC+:} false; then : - $as_echo_n "(cached) " >&6 -else - if test -n "$CC"; then - ac_cv_prog_CC="$CC" # Let the user override the test. -else -as_save_IFS=$IFS; IFS=$PATH_SEPARATOR -for as_dir in $PATH -do - IFS=$as_save_IFS - test -z "$as_dir" && as_dir=. - for ac_exec_ext in '' $ac_executable_extensions; do - if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then - ac_cv_prog_CC="${ac_tool_prefix}cc" - $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 - break 2 - fi -done - done -IFS=$as_save_IFS - -fi -fi -CC=$ac_cv_prog_CC -if test -n "$CC"; then - { $as_echo "$as_me:${as_lineno-$LINENO}: result: $CC" >&5 -$as_echo "$CC" >&6; } -else - { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 -$as_echo "no" >&6; } -fi - - - fi -fi -if test -z "$CC"; then - # Extract the first word of "cc", so it can be a program name with args. -set dummy cc; ac_word=$2 -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 -$as_echo_n "checking for $ac_word... " >&6; } -if ${ac_cv_prog_CC+:} false; then : - $as_echo_n "(cached) " >&6 -else - if test -n "$CC"; then - ac_cv_prog_CC="$CC" # Let the user override the test. -else - ac_prog_rejected=no -as_save_IFS=$IFS; IFS=$PATH_SEPARATOR -for as_dir in $PATH -do - IFS=$as_save_IFS - test -z "$as_dir" && as_dir=. - for ac_exec_ext in '' $ac_executable_extensions; do - if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then - if test "$as_dir/$ac_word$ac_exec_ext" = "/usr/ucb/cc"; then - ac_prog_rejected=yes - continue - fi - ac_cv_prog_CC="cc" - $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 - break 2 - fi -done - done -IFS=$as_save_IFS - -if test $ac_prog_rejected = yes; then - # We found a bogon in the path, so make sure we never use it. - set dummy $ac_cv_prog_CC - shift - if test $@%:@ != 0; then - # We chose a different compiler from the bogus one. - # However, it has the same basename, so the bogon will be chosen - # first if we set CC to just the basename; use the full file name. - shift - ac_cv_prog_CC="$as_dir/$ac_word${1+' '}$@" - fi -fi -fi -fi -CC=$ac_cv_prog_CC -if test -n "$CC"; then - { $as_echo "$as_me:${as_lineno-$LINENO}: result: $CC" >&5 -$as_echo "$CC" >&6; } -else - { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 -$as_echo "no" >&6; } -fi - - -fi -if test -z "$CC"; then - if test -n "$ac_tool_prefix"; then - for ac_prog in cl.exe - do - # Extract the first word of "$ac_tool_prefix$ac_prog", so it can be a program name with args. -set dummy $ac_tool_prefix$ac_prog; ac_word=$2 -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 -$as_echo_n "checking for $ac_word... " >&6; } -if ${ac_cv_prog_CC+:} false; then : - $as_echo_n "(cached) " >&6 -else - if test -n "$CC"; then - ac_cv_prog_CC="$CC" # Let the user override the test. -else -as_save_IFS=$IFS; IFS=$PATH_SEPARATOR -for as_dir in $PATH -do - IFS=$as_save_IFS - test -z "$as_dir" && as_dir=. - for ac_exec_ext in '' $ac_executable_extensions; do - if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then - ac_cv_prog_CC="$ac_tool_prefix$ac_prog" - $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 - break 2 - fi -done - done -IFS=$as_save_IFS - -fi -fi -CC=$ac_cv_prog_CC -if test -n "$CC"; then - { $as_echo "$as_me:${as_lineno-$LINENO}: result: $CC" >&5 -$as_echo "$CC" >&6; } -else - { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 -$as_echo "no" >&6; } -fi - - - test -n "$CC" && break - done -fi -if test -z "$CC"; then - ac_ct_CC=$CC - for ac_prog in cl.exe -do - # Extract the first word of "$ac_prog", so it can be a program name with args. -set dummy $ac_prog; ac_word=$2 -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 -$as_echo_n "checking for $ac_word... " >&6; } -if ${ac_cv_prog_ac_ct_CC+:} false; then : - $as_echo_n "(cached) " >&6 -else - if test -n "$ac_ct_CC"; then - ac_cv_prog_ac_ct_CC="$ac_ct_CC" # Let the user override the test. -else -as_save_IFS=$IFS; IFS=$PATH_SEPARATOR -for as_dir in $PATH -do - IFS=$as_save_IFS - test -z "$as_dir" && as_dir=. - for ac_exec_ext in '' $ac_executable_extensions; do - if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then - ac_cv_prog_ac_ct_CC="$ac_prog" - $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 - break 2 - fi -done - done -IFS=$as_save_IFS - -fi -fi -ac_ct_CC=$ac_cv_prog_ac_ct_CC -if test -n "$ac_ct_CC"; then - { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_ct_CC" >&5 -$as_echo "$ac_ct_CC" >&6; } -else - { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 -$as_echo "no" >&6; } -fi - - - test -n "$ac_ct_CC" && break -done - - if test "x$ac_ct_CC" = x; then - CC="" - else - case $cross_compiling:$ac_tool_warned in -yes:) -{ $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5 -$as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;} -ac_tool_warned=yes ;; -esac - CC=$ac_ct_CC - fi -fi - -fi - - -test -z "$CC" && { { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5 -$as_echo "$as_me: error: in \`$ac_pwd':" >&2;} -as_fn_error $? "no acceptable C compiler found in \$PATH -See \`config.log' for more details" "$LINENO" 5; } - -# Provide some information about the compiler. -$as_echo "$as_me:${as_lineno-$LINENO}: checking for C compiler version" >&5 -set X $ac_compile -ac_compiler=$2 -for ac_option in --version -v -V -qversion; do - { { ac_try="$ac_compiler $ac_option >&5" -case "(($ac_try" in - *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; - *) ac_try_echo=$ac_try;; -esac -eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\"" -$as_echo "$ac_try_echo"; } >&5 - (eval "$ac_compiler $ac_option >&5") 2>conftest.err - ac_status=$? - if test -s conftest.err; then - sed '10a\ -... rest of stderr output deleted ... - 10q' conftest.err >conftest.er1 - cat conftest.er1 >&5 - fi - rm -f conftest.er1 conftest.err - $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 - test $ac_status = 0; } -done - -cat confdefs.h - <<_ACEOF >conftest.$ac_ext -/* end confdefs.h. */ - -int -main () -{ - - ; - return 0; -} -_ACEOF -ac_clean_files_save=$ac_clean_files -ac_clean_files="$ac_clean_files a.out a.out.dSYM a.exe b.out" -# Try to create an executable without -o first, disregard a.out. -# It will help us diagnose broken compilers, and finding out an intuition -# of exeext. -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether the C compiler works" >&5 -$as_echo_n "checking whether the C compiler works... " >&6; } -ac_link_default=`$as_echo "$ac_link" | sed 's/ -o *conftest[^ ]*//'` - -# The possible output files: -ac_files="a.out conftest.exe conftest a.exe a_out.exe b.out conftest.*" - -ac_rmfiles= -for ac_file in $ac_files -do - case $ac_file in - *.$ac_ext | *.xcoff | *.tds | *.d | *.pdb | *.xSYM | *.bb | *.bbg | *.map | *.inf | *.dSYM | *.o | *.obj ) ;; - * ) ac_rmfiles="$ac_rmfiles $ac_file";; - esac -done -rm -f $ac_rmfiles - -if { { ac_try="$ac_link_default" -case "(($ac_try" in - *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; - *) ac_try_echo=$ac_try;; -esac -eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\"" -$as_echo "$ac_try_echo"; } >&5 - (eval "$ac_link_default") 2>&5 - ac_status=$? - $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 - test $ac_status = 0; }; then : - # Autoconf-2.13 could set the ac_cv_exeext variable to `no'. -# So ignore a value of `no', otherwise this would lead to `EXEEXT = no' -# in a Makefile. We should not override ac_cv_exeext if it was cached, -# so that the user can short-circuit this test for compilers unknown to -# Autoconf. -for ac_file in $ac_files '' -do - test -f "$ac_file" || continue - case $ac_file in - *.$ac_ext | *.xcoff | *.tds | *.d | *.pdb | *.xSYM | *.bb | *.bbg | *.map | *.inf | *.dSYM | *.o | *.obj ) - ;; - [ab].out ) - # We found the default executable, but exeext='' is most - # certainly right. - break;; - *.* ) - if test "${ac_cv_exeext+set}" = set && test "$ac_cv_exeext" != no; - then :; else - ac_cv_exeext=`expr "$ac_file" : '[^.]*\(\..*\)'` - fi - # We set ac_cv_exeext here because the later test for it is not - # safe: cross compilers may not add the suffix if given an `-o' - # argument, so we may need to know it at that point already. - # Even if this section looks crufty: it has the advantage of - # actually working. - break;; - * ) - break;; - esac -done -test "$ac_cv_exeext" = no && ac_cv_exeext= - -else - ac_file='' -fi -if test -z "$ac_file"; then : - { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 -$as_echo "no" >&6; } -$as_echo "$as_me: failed program was:" >&5 -sed 's/^/| /' conftest.$ac_ext >&5 - -{ { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5 -$as_echo "$as_me: error: in \`$ac_pwd':" >&2;} -as_fn_error 77 "C compiler cannot create executables -See \`config.log' for more details" "$LINENO" 5; } -else - { $as_echo "$as_me:${as_lineno-$LINENO}: result: yes" >&5 -$as_echo "yes" >&6; } -fi -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for C compiler default output file name" >&5 -$as_echo_n "checking for C compiler default output file name... " >&6; } -{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_file" >&5 -$as_echo "$ac_file" >&6; } -ac_exeext=$ac_cv_exeext - -rm -f -r a.out a.out.dSYM a.exe conftest$ac_cv_exeext b.out -ac_clean_files=$ac_clean_files_save -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for suffix of executables" >&5 -$as_echo_n "checking for suffix of executables... " >&6; } -if { { ac_try="$ac_link" -case "(($ac_try" in - *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; - *) ac_try_echo=$ac_try;; -esac -eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\"" -$as_echo "$ac_try_echo"; } >&5 - (eval "$ac_link") 2>&5 - ac_status=$? - $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 - test $ac_status = 0; }; then : - # If both `conftest.exe' and `conftest' are `present' (well, observable) -# catch `conftest.exe'. For instance with Cygwin, `ls conftest' will -# work properly (i.e., refer to `conftest.exe'), while it won't with -# `rm'. -for ac_file in conftest.exe conftest conftest.*; do - test -f "$ac_file" || continue - case $ac_file in - *.$ac_ext | *.xcoff | *.tds | *.d | *.pdb | *.xSYM | *.bb | *.bbg | *.map | *.inf | *.dSYM | *.o | *.obj ) ;; - *.* ) ac_cv_exeext=`expr "$ac_file" : '[^.]*\(\..*\)'` - break;; - * ) break;; - esac -done -else - { { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5 -$as_echo "$as_me: error: in \`$ac_pwd':" >&2;} -as_fn_error $? "cannot compute suffix of executables: cannot compile and link -See \`config.log' for more details" "$LINENO" 5; } -fi -rm -f conftest conftest$ac_cv_exeext -{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_exeext" >&5 -$as_echo "$ac_cv_exeext" >&6; } - -rm -f conftest.$ac_ext -EXEEXT=$ac_cv_exeext -ac_exeext=$EXEEXT -cat confdefs.h - <<_ACEOF >conftest.$ac_ext -/* end confdefs.h. */ -@%:@include -int -main () -{ -FILE *f = fopen ("conftest.out", "w"); - return ferror (f) || fclose (f) != 0; - - ; - return 0; -} -_ACEOF -ac_clean_files="$ac_clean_files conftest.out" -# Check that the compiler produces executables we can run. If not, either -# the compiler is broken, or we cross compile. -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether we are cross compiling" >&5 -$as_echo_n "checking whether we are cross compiling... " >&6; } -if test "$cross_compiling" != yes; then - { { ac_try="$ac_link" -case "(($ac_try" in - *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; - *) ac_try_echo=$ac_try;; -esac -eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\"" -$as_echo "$ac_try_echo"; } >&5 - (eval "$ac_link") 2>&5 - ac_status=$? - $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 - test $ac_status = 0; } - if { ac_try='./conftest$ac_cv_exeext' - { { case "(($ac_try" in - *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; - *) ac_try_echo=$ac_try;; -esac -eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\"" -$as_echo "$ac_try_echo"; } >&5 - (eval "$ac_try") 2>&5 - ac_status=$? - $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 - test $ac_status = 0; }; }; then - cross_compiling=no - else - if test "$cross_compiling" = maybe; then - cross_compiling=yes - else - { { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5 -$as_echo "$as_me: error: in \`$ac_pwd':" >&2;} -as_fn_error $? "cannot run C compiled programs. -If you meant to cross compile, use \`--host'. -See \`config.log' for more details" "$LINENO" 5; } - fi - fi -fi -{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $cross_compiling" >&5 -$as_echo "$cross_compiling" >&6; } - -rm -f conftest.$ac_ext conftest$ac_cv_exeext conftest.out -ac_clean_files=$ac_clean_files_save -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for suffix of object files" >&5 -$as_echo_n "checking for suffix of object files... " >&6; } -if ${ac_cv_objext+:} false; then : - $as_echo_n "(cached) " >&6 -else - cat confdefs.h - <<_ACEOF >conftest.$ac_ext -/* end confdefs.h. */ - -int -main () -{ - - ; - return 0; -} -_ACEOF -rm -f conftest.o conftest.obj -if { { ac_try="$ac_compile" -case "(($ac_try" in - *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; - *) ac_try_echo=$ac_try;; -esac -eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\"" -$as_echo "$ac_try_echo"; } >&5 - (eval "$ac_compile") 2>&5 - ac_status=$? - $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 - test $ac_status = 0; }; then : - for ac_file in conftest.o conftest.obj conftest.*; do - test -f "$ac_file" || continue; - case $ac_file in - *.$ac_ext | *.xcoff | *.tds | *.d | *.pdb | *.xSYM | *.bb | *.bbg | *.map | *.inf | *.dSYM ) ;; - *) ac_cv_objext=`expr "$ac_file" : '.*\.\(.*\)'` - break;; - esac -done -else - $as_echo "$as_me: failed program was:" >&5 -sed 's/^/| /' conftest.$ac_ext >&5 - -{ { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5 -$as_echo "$as_me: error: in \`$ac_pwd':" >&2;} -as_fn_error $? "cannot compute suffix of object files: cannot compile -See \`config.log' for more details" "$LINENO" 5; } -fi -rm -f conftest.$ac_cv_objext conftest.$ac_ext -fi -{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_objext" >&5 -$as_echo "$ac_cv_objext" >&6; } -OBJEXT=$ac_cv_objext -ac_objext=$OBJEXT -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether we are using the GNU C compiler" >&5 -$as_echo_n "checking whether we are using the GNU C compiler... " >&6; } -if ${ac_cv_c_compiler_gnu+:} false; then : - $as_echo_n "(cached) " >&6 -else - cat confdefs.h - <<_ACEOF >conftest.$ac_ext -/* end confdefs.h. */ - -int -main () -{ -#ifndef __GNUC__ - choke me -#endif - - ; - return 0; -} -_ACEOF -if ac_fn_c_try_compile "$LINENO"; then : - ac_compiler_gnu=yes -else - ac_compiler_gnu=no -fi -rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext -ac_cv_c_compiler_gnu=$ac_compiler_gnu - -fi -{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_c_compiler_gnu" >&5 -$as_echo "$ac_cv_c_compiler_gnu" >&6; } -if test $ac_compiler_gnu = yes; then - GCC=yes -else - GCC= -fi -ac_test_CFLAGS=${CFLAGS+set} -ac_save_CFLAGS=$CFLAGS -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether $CC accepts -g" >&5 -$as_echo_n "checking whether $CC accepts -g... " >&6; } -if ${ac_cv_prog_cc_g+:} false; then : - $as_echo_n "(cached) " >&6 -else - ac_save_c_werror_flag=$ac_c_werror_flag - ac_c_werror_flag=yes - ac_cv_prog_cc_g=no - CFLAGS="-g" - cat confdefs.h - <<_ACEOF >conftest.$ac_ext -/* end confdefs.h. */ - -int -main () -{ - - ; - return 0; -} -_ACEOF -if ac_fn_c_try_compile "$LINENO"; then : - ac_cv_prog_cc_g=yes -else - CFLAGS="" - cat confdefs.h - <<_ACEOF >conftest.$ac_ext -/* end confdefs.h. */ - -int -main () -{ - - ; - return 0; -} -_ACEOF -if ac_fn_c_try_compile "$LINENO"; then : - -else - ac_c_werror_flag=$ac_save_c_werror_flag - CFLAGS="-g" - cat confdefs.h - <<_ACEOF >conftest.$ac_ext -/* end confdefs.h. */ - -int -main () -{ - - ; - return 0; -} -_ACEOF -if ac_fn_c_try_compile "$LINENO"; then : - ac_cv_prog_cc_g=yes -fi -rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext -fi -rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext -fi -rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext - ac_c_werror_flag=$ac_save_c_werror_flag -fi -{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_prog_cc_g" >&5 -$as_echo "$ac_cv_prog_cc_g" >&6; } -if test "$ac_test_CFLAGS" = set; then - CFLAGS=$ac_save_CFLAGS -elif test $ac_cv_prog_cc_g = yes; then - if test "$GCC" = yes; then - CFLAGS="-g -O2" - else - CFLAGS="-g" - fi -else - if test "$GCC" = yes; then - CFLAGS="-O2" - else - CFLAGS= - fi -fi -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $CC option to accept ISO C89" >&5 -$as_echo_n "checking for $CC option to accept ISO C89... " >&6; } -if ${ac_cv_prog_cc_c89+:} false; then : - $as_echo_n "(cached) " >&6 -else - ac_cv_prog_cc_c89=no -ac_save_CC=$CC -cat confdefs.h - <<_ACEOF >conftest.$ac_ext -/* end confdefs.h. */ -#include -#include -struct stat; -/* Most of the following tests are stolen from RCS 5.7's src/conf.sh. */ -struct buf { int x; }; -FILE * (*rcsopen) (struct buf *, struct stat *, int); -static char *e (p, i) - char **p; - int i; -{ - return p[i]; -} -static char *f (char * (*g) (char **, int), char **p, ...) -{ - char *s; - va_list v; - va_start (v,p); - s = g (p, va_arg (v,int)); - va_end (v); - return s; -} - -/* OSF 4.0 Compaq cc is some sort of almost-ANSI by default. It has - function prototypes and stuff, but not '\xHH' hex character constants. - These don't provoke an error unfortunately, instead are silently treated - as 'x'. The following induces an error, until -std is added to get - proper ANSI mode. Curiously '\x00'!='x' always comes out true, for an - array size at least. It's necessary to write '\x00'==0 to get something - that's true only with -std. */ -int osf4_cc_array ['\x00' == 0 ? 1 : -1]; - -/* IBM C 6 for AIX is almost-ANSI by default, but it replaces macro parameters - inside strings and character constants. */ -#define FOO(x) 'x' -int xlc6_cc_array[FOO(a) == 'x' ? 1 : -1]; - -int test (int i, double x); -struct s1 {int (*f) (int a);}; -struct s2 {int (*f) (double a);}; -int pairnames (int, char **, FILE *(*)(struct buf *, struct stat *, int), int, int); -int argc; -char **argv; -int -main () -{ -return f (e, argv, 0) != argv[0] || f (e, argv, 1) != argv[1]; - ; - return 0; -} -_ACEOF -for ac_arg in '' -qlanglvl=extc89 -qlanglvl=ansi -std \ - -Ae "-Aa -D_HPUX_SOURCE" "-Xc -D__EXTENSIONS__" -do - CC="$ac_save_CC $ac_arg" - if ac_fn_c_try_compile "$LINENO"; then : - ac_cv_prog_cc_c89=$ac_arg -fi -rm -f core conftest.err conftest.$ac_objext - test "x$ac_cv_prog_cc_c89" != "xno" && break -done -rm -f conftest.$ac_ext -CC=$ac_save_CC - -fi -# AC_CACHE_VAL -case "x$ac_cv_prog_cc_c89" in - x) - { $as_echo "$as_me:${as_lineno-$LINENO}: result: none needed" >&5 -$as_echo "none needed" >&6; } ;; - xno) - { $as_echo "$as_me:${as_lineno-$LINENO}: result: unsupported" >&5 -$as_echo "unsupported" >&6; } ;; - *) - CC="$CC $ac_cv_prog_cc_c89" - { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_prog_cc_c89" >&5 -$as_echo "$ac_cv_prog_cc_c89" >&6; } ;; -esac -if test "x$ac_cv_prog_cc_c89" != xno; then : - -fi - -ac_ext=c -ac_cpp='$CPP $CPPFLAGS' -ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5' -ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5' -ac_compiler_gnu=$ac_cv_c_compiler_gnu - -ac_ext=c -ac_cpp='$CPP $CPPFLAGS' -ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5' -ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5' -ac_compiler_gnu=$ac_cv_c_compiler_gnu -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether $CC understands -c and -o together" >&5 -$as_echo_n "checking whether $CC understands -c and -o together... " >&6; } -if ${am_cv_prog_cc_c_o+:} false; then : - $as_echo_n "(cached) " >&6 -else - cat confdefs.h - <<_ACEOF >conftest.$ac_ext -/* end confdefs.h. */ - -int -main () -{ - - ; - return 0; -} -_ACEOF - # Make sure it works both with $CC and with simple cc. - # Following AC_PROG_CC_C_O, we do the test twice because some - # compilers refuse to overwrite an existing .o file with -o, - # though they will create one. - am_cv_prog_cc_c_o=yes - for am_i in 1 2; do - if { echo "$as_me:$LINENO: $CC -c conftest.$ac_ext -o conftest2.$ac_objext" >&5 - ($CC -c conftest.$ac_ext -o conftest2.$ac_objext) >&5 2>&5 - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); } \ - && test -f conftest2.$ac_objext; then - : OK - else - am_cv_prog_cc_c_o=no - break - fi - done - rm -f core conftest* - unset am_i -fi -{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $am_cv_prog_cc_c_o" >&5 -$as_echo "$am_cv_prog_cc_c_o" >&6; } -if test "$am_cv_prog_cc_c_o" != yes; then - # Losing compiler, so override with the script. - # FIXME: It is wrong to rewrite CC. - # But if we don't then we get into trouble of one sort or another. - # A longer-term fix would be to have automake use am__CC in this case, - # and then we could set am__CC="\$(top_srcdir)/compile \$(CC)" - CC="$am_aux_dir/compile $CC" -fi -ac_ext=c -ac_cpp='$CPP $CPPFLAGS' -ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5' -ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5' -ac_compiler_gnu=$ac_cv_c_compiler_gnu - -DEPDIR="${am__leading_dot}deps" - -ac_config_commands="$ac_config_commands depfiles" - - -am_make=${MAKE-make} -cat > confinc << 'END' -am__doit: - @echo this is the am__doit target -.PHONY: am__doit -END -# If we don't find an include directive, just comment out the code. -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for style of include used by $am_make" >&5 -$as_echo_n "checking for style of include used by $am_make... " >&6; } -am__include="#" -am__quote= -_am_result=none -# First try GNU make style include. -echo "include confinc" > confmf -# Ignore all kinds of additional output from 'make'. -case `$am_make -s -f confmf 2> /dev/null` in #( -*the\ am__doit\ target*) - am__include=include - am__quote= - _am_result=GNU - ;; -esac -# Now try BSD make style include. -if test "$am__include" = "#"; then - echo '.include "confinc"' > confmf - case `$am_make -s -f confmf 2> /dev/null` in #( - *the\ am__doit\ target*) - am__include=.include - am__quote="\"" - _am_result=BSD - ;; - esac -fi - - -{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $_am_result" >&5 -$as_echo "$_am_result" >&6; } -rm -f confinc confmf - -@%:@ Check whether --enable-dependency-tracking was given. -if test "${enable_dependency_tracking+set}" = set; then : - enableval=$enable_dependency_tracking; -fi - -if test "x$enable_dependency_tracking" != xno; then - am_depcomp="$ac_aux_dir/depcomp" - AMDEPBACKSLASH='\' - am__nodep='_no' -fi - if test "x$enable_dependency_tracking" != xno; then - AMDEP_TRUE= - AMDEP_FALSE='#' -else - AMDEP_TRUE='#' - AMDEP_FALSE= -fi - - - -depcc="$CC" am_compiler_list= - -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking dependency style of $depcc" >&5 -$as_echo_n "checking dependency style of $depcc... " >&6; } -if ${am_cv_CC_dependencies_compiler_type+:} false; then : - $as_echo_n "(cached) " >&6 -else - if test -z "$AMDEP_TRUE" && test -f "$am_depcomp"; then - # We make a subdir and do the tests there. Otherwise we can end up - # making bogus files that we don't know about and never remove. For - # instance it was reported that on HP-UX the gcc test will end up - # making a dummy file named 'D' -- because '-MD' means "put the output - # in D". - rm -rf conftest.dir - mkdir conftest.dir - # Copy depcomp to subdir because otherwise we won't find it if we're - # using a relative directory. - cp "$am_depcomp" conftest.dir - cd conftest.dir - # We will build objects and dependencies in a subdirectory because - # it helps to detect inapplicable dependency modes. For instance - # both Tru64's cc and ICC support -MD to output dependencies as a - # side effect of compilation, but ICC will put the dependencies in - # the current directory while Tru64 will put them in the object - # directory. - mkdir sub - - am_cv_CC_dependencies_compiler_type=none - if test "$am_compiler_list" = ""; then - am_compiler_list=`sed -n 's/^#*\([a-zA-Z0-9]*\))$/\1/p' < ./depcomp` - fi - am__universal=false - case " $depcc " in #( - *\ -arch\ *\ -arch\ *) am__universal=true ;; - esac - - for depmode in $am_compiler_list; do - # Setup a source with many dependencies, because some compilers - # like to wrap large dependency lists on column 80 (with \), and - # we should not choose a depcomp mode which is confused by this. - # - # We need to recreate these files for each test, as the compiler may - # overwrite some of them when testing with obscure command lines. - # This happens at least with the AIX C compiler. - : > sub/conftest.c - for i in 1 2 3 4 5 6; do - echo '#include "conftst'$i'.h"' >> sub/conftest.c - # Using ": > sub/conftst$i.h" creates only sub/conftst1.h with - # Solaris 10 /bin/sh. - echo '/* dummy */' > sub/conftst$i.h - done - echo "${am__include} ${am__quote}sub/conftest.Po${am__quote}" > confmf - - # We check with '-c' and '-o' for the sake of the "dashmstdout" - # mode. It turns out that the SunPro C++ compiler does not properly - # handle '-M -o', and we need to detect this. Also, some Intel - # versions had trouble with output in subdirs. - am__obj=sub/conftest.${OBJEXT-o} - am__minus_obj="-o $am__obj" - case $depmode in - gcc) - # This depmode causes a compiler race in universal mode. - test "$am__universal" = false || continue - ;; - nosideeffect) - # After this tag, mechanisms are not by side-effect, so they'll - # only be used when explicitly requested. - if test "x$enable_dependency_tracking" = xyes; then - continue - else - break - fi - ;; - msvc7 | msvc7msys | msvisualcpp | msvcmsys) - # This compiler won't grok '-c -o', but also, the minuso test has - # not run yet. These depmodes are late enough in the game, and - # so weak that their functioning should not be impacted. - am__obj=conftest.${OBJEXT-o} - am__minus_obj= - ;; - none) break ;; - esac - if depmode=$depmode \ - source=sub/conftest.c object=$am__obj \ - depfile=sub/conftest.Po tmpdepfile=sub/conftest.TPo \ - $SHELL ./depcomp $depcc -c $am__minus_obj sub/conftest.c \ - >/dev/null 2>conftest.err && - grep sub/conftst1.h sub/conftest.Po > /dev/null 2>&1 && - grep sub/conftst6.h sub/conftest.Po > /dev/null 2>&1 && - grep $am__obj sub/conftest.Po > /dev/null 2>&1 && - ${MAKE-make} -s -f confmf > /dev/null 2>&1; then - # icc doesn't choke on unknown options, it will just issue warnings - # or remarks (even with -Werror). So we grep stderr for any message - # that says an option was ignored or not supported. - # When given -MP, icc 7.0 and 7.1 complain thusly: - # icc: Command line warning: ignoring option '-M'; no argument required - # The diagnosis changed in icc 8.0: - # icc: Command line remark: option '-MP' not supported - if (grep 'ignoring option' conftest.err || - grep 'not supported' conftest.err) >/dev/null 2>&1; then :; else - am_cv_CC_dependencies_compiler_type=$depmode - break - fi - fi - done - - cd .. - rm -rf conftest.dir -else - am_cv_CC_dependencies_compiler_type=none -fi - -fi -{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $am_cv_CC_dependencies_compiler_type" >&5 -$as_echo "$am_cv_CC_dependencies_compiler_type" >&6; } -CCDEPMODE=depmode=$am_cv_CC_dependencies_compiler_type - - if - test "x$enable_dependency_tracking" != xno \ - && test "$am_cv_CC_dependencies_compiler_type" = gcc3; then - am__fastdepCC_TRUE= - am__fastdepCC_FALSE='#' -else - am__fastdepCC_TRUE='#' - am__fastdepCC_FALSE= -fi - - - - - -# Checks for libraries. - -# Checks for header files. - -# Checks for typedefs, structures, and compiler characteristics. - -# Checks for library functions. - -ac_config_files="$ac_config_files Makefile" - -cat >confcache <<\_ACEOF -# This file is a shell script that caches the results of configure -# tests run on this system so they can be shared between configure -# scripts and configure runs, see configure's option --config-cache. -# It is not useful on other systems. If it contains results you don't -# want to keep, you may remove or edit it. -# -# config.status only pays attention to the cache file if you give it -# the --recheck option to rerun configure. -# -# `ac_cv_env_foo' variables (set or unset) will be overridden when -# loading this file, other *unset* `ac_cv_foo' will be assigned the -# following values. - -_ACEOF - -# The following way of writing the cache mishandles newlines in values, -# but we know of no workaround that is simple, portable, and efficient. -# So, we kill variables containing newlines. -# Ultrix sh set writes to stderr and can't be redirected directly, -# and sets the high bit in the cache file unless we assign to the vars. -( - for ac_var in `(set) 2>&1 | sed -n 's/^\([a-zA-Z_][a-zA-Z0-9_]*\)=.*/\1/p'`; do - eval ac_val=\$$ac_var - case $ac_val in #( - *${as_nl}*) - case $ac_var in #( - *_cv_*) { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: cache variable $ac_var contains a newline" >&5 -$as_echo "$as_me: WARNING: cache variable $ac_var contains a newline" >&2;} ;; - esac - case $ac_var in #( - _ | IFS | as_nl) ;; #( - BASH_ARGV | BASH_SOURCE) eval $ac_var= ;; #( - *) { eval $ac_var=; unset $ac_var;} ;; - esac ;; - esac - done - - (set) 2>&1 | - case $as_nl`(ac_space=' '; set) 2>&1` in #( - *${as_nl}ac_space=\ *) - # `set' does not quote correctly, so add quotes: double-quote - # substitution turns \\\\ into \\, and sed turns \\ into \. - sed -n \ - "s/'/'\\\\''/g; - s/^\\([_$as_cr_alnum]*_cv_[_$as_cr_alnum]*\\)=\\(.*\\)/\\1='\\2'/p" - ;; #( - *) - # `set' quotes correctly as required by POSIX, so do not add quotes. - sed -n "/^[_$as_cr_alnum]*_cv_[_$as_cr_alnum]*=/p" - ;; - esac | - sort -) | - sed ' - /^ac_cv_env_/b end - t clear - :clear - s/^\([^=]*\)=\(.*[{}].*\)$/test "${\1+set}" = set || &/ - t end - s/^\([^=]*\)=\(.*\)$/\1=${\1=\2}/ - :end' >>confcache -if diff "$cache_file" confcache >/dev/null 2>&1; then :; else - if test -w "$cache_file"; then - if test "x$cache_file" != "x/dev/null"; then - { $as_echo "$as_me:${as_lineno-$LINENO}: updating cache $cache_file" >&5 -$as_echo "$as_me: updating cache $cache_file" >&6;} - if test ! -f "$cache_file" || test -h "$cache_file"; then - cat confcache >"$cache_file" - else - case $cache_file in #( - */* | ?:*) - mv -f confcache "$cache_file"$$ && - mv -f "$cache_file"$$ "$cache_file" ;; #( - *) - mv -f confcache "$cache_file" ;; - esac - fi - fi - else - { $as_echo "$as_me:${as_lineno-$LINENO}: not updating unwritable cache $cache_file" >&5 -$as_echo "$as_me: not updating unwritable cache $cache_file" >&6;} - fi -fi -rm -f confcache - -test "x$prefix" = xNONE && prefix=$ac_default_prefix -# Let make expand exec_prefix. -test "x$exec_prefix" = xNONE && exec_prefix='${prefix}' - -DEFS=-DHAVE_CONFIG_H - -ac_libobjs= -ac_ltlibobjs= -U= -for ac_i in : $LIB@&t@OBJS; do test "x$ac_i" = x: && continue - # 1. Remove the extension, and $U if already installed. - ac_script='s/\$U\././;s/\.o$//;s/\.obj$//' - ac_i=`$as_echo "$ac_i" | sed "$ac_script"` - # 2. Prepend LIBOBJDIR. When used with automake>=1.10 LIBOBJDIR - # will be set to the directory where LIBOBJS objects are built. - as_fn_append ac_libobjs " \${LIBOBJDIR}$ac_i\$U.$ac_objext" - as_fn_append ac_ltlibobjs " \${LIBOBJDIR}$ac_i"'$U.lo' -done -LIB@&t@OBJS=$ac_libobjs - -LTLIBOBJS=$ac_ltlibobjs - - -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking that generated files are newer than configure" >&5 -$as_echo_n "checking that generated files are newer than configure... " >&6; } - if test -n "$am_sleep_pid"; then - # Hide warnings about reused PIDs. - wait $am_sleep_pid 2>/dev/null - fi - { $as_echo "$as_me:${as_lineno-$LINENO}: result: done" >&5 -$as_echo "done" >&6; } - if test -n "$EXEEXT"; then - am__EXEEXT_TRUE= - am__EXEEXT_FALSE='#' -else - am__EXEEXT_TRUE='#' - am__EXEEXT_FALSE= -fi - -if test -z "${AMDEP_TRUE}" && test -z "${AMDEP_FALSE}"; then - as_fn_error $? "conditional \"AMDEP\" was never defined. -Usually this means the macro was only invoked conditionally." "$LINENO" 5 -fi -if test -z "${am__fastdepCC_TRUE}" && test -z "${am__fastdepCC_FALSE}"; then - as_fn_error $? "conditional \"am__fastdepCC\" was never defined. -Usually this means the macro was only invoked conditionally." "$LINENO" 5 -fi - -: "${CONFIG_STATUS=./config.status}" -ac_write_fail=0 -ac_clean_files_save=$ac_clean_files -ac_clean_files="$ac_clean_files $CONFIG_STATUS" -{ $as_echo "$as_me:${as_lineno-$LINENO}: creating $CONFIG_STATUS" >&5 -$as_echo "$as_me: creating $CONFIG_STATUS" >&6;} -as_write_fail=0 -cat >$CONFIG_STATUS <<_ASEOF || as_write_fail=1 -#! $SHELL -# Generated by $as_me. -# Run this file to recreate the current configuration. -# Compiler output produced by configure, useful for debugging -# configure, is in config.log if it exists. - -debug=false -ac_cs_recheck=false -ac_cs_silent=false - -SHELL=\${CONFIG_SHELL-$SHELL} -export SHELL -_ASEOF -cat >>$CONFIG_STATUS <<\_ASEOF || as_write_fail=1 -## -------------------- ## -## M4sh Initialization. ## -## -------------------- ## - -# Be more Bourne compatible -DUALCASE=1; export DUALCASE # for MKS sh -if test -n "${ZSH_VERSION+set}" && (emulate sh) >/dev/null 2>&1; then : - emulate sh - NULLCMD=: - # Pre-4.2 versions of Zsh do word splitting on ${1+"$@"}, which - # is contrary to our usage. Disable this feature. - alias -g '${1+"$@"}'='"$@"' - setopt NO_GLOB_SUBST -else - case `(set -o) 2>/dev/null` in @%:@( - *posix*) : - set -o posix ;; @%:@( - *) : - ;; -esac -fi - - -as_nl=' -' -export as_nl -# Printing a long string crashes Solaris 7 /usr/bin/printf. -as_echo='\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\' -as_echo=$as_echo$as_echo$as_echo$as_echo$as_echo -as_echo=$as_echo$as_echo$as_echo$as_echo$as_echo$as_echo -# Prefer a ksh shell builtin over an external printf program on Solaris, -# but without wasting forks for bash or zsh. -if test -z "$BASH_VERSION$ZSH_VERSION" \ - && (test "X`print -r -- $as_echo`" = "X$as_echo") 2>/dev/null; then - as_echo='print -r --' - as_echo_n='print -rn --' -elif (test "X`printf %s $as_echo`" = "X$as_echo") 2>/dev/null; then - as_echo='printf %s\n' - as_echo_n='printf %s' -else - if test "X`(/usr/ucb/echo -n -n $as_echo) 2>/dev/null`" = "X-n $as_echo"; then - as_echo_body='eval /usr/ucb/echo -n "$1$as_nl"' - as_echo_n='/usr/ucb/echo -n' - else - as_echo_body='eval expr "X$1" : "X\\(.*\\)"' - as_echo_n_body='eval - arg=$1; - case $arg in @%:@( - *"$as_nl"*) - expr "X$arg" : "X\\(.*\\)$as_nl"; - arg=`expr "X$arg" : ".*$as_nl\\(.*\\)"`;; - esac; - expr "X$arg" : "X\\(.*\\)" | tr -d "$as_nl" - ' - export as_echo_n_body - as_echo_n='sh -c $as_echo_n_body as_echo' - fi - export as_echo_body - as_echo='sh -c $as_echo_body as_echo' -fi - -# The user is always right. -if test "${PATH_SEPARATOR+set}" != set; then - PATH_SEPARATOR=: - (PATH='/bin;/bin'; FPATH=$PATH; sh -c :) >/dev/null 2>&1 && { - (PATH='/bin:/bin'; FPATH=$PATH; sh -c :) >/dev/null 2>&1 || - PATH_SEPARATOR=';' - } -fi - - -# IFS -# We need space, tab and new line, in precisely that order. Quoting is -# there to prevent editors from complaining about space-tab. -# (If _AS_PATH_WALK were called with IFS unset, it would disable word -# splitting by setting IFS to empty value.) -IFS=" "" $as_nl" - -# Find who we are. Look in the path if we contain no directory separator. -as_myself= -case $0 in @%:@(( - *[\\/]* ) as_myself=$0 ;; - *) as_save_IFS=$IFS; IFS=$PATH_SEPARATOR -for as_dir in $PATH -do - IFS=$as_save_IFS - test -z "$as_dir" && as_dir=. - test -r "$as_dir/$0" && as_myself=$as_dir/$0 && break - done -IFS=$as_save_IFS - - ;; -esac -# We did not find ourselves, most probably we were run as `sh COMMAND' -# in which case we are not to be found in the path. -if test "x$as_myself" = x; then - as_myself=$0 -fi -if test ! -f "$as_myself"; then - $as_echo "$as_myself: error: cannot find myself; rerun with an absolute file name" >&2 - exit 1 -fi - -# Unset variables that we do not need and which cause bugs (e.g. in -# pre-3.0 UWIN ksh). But do not cause bugs in bash 2.01; the "|| exit 1" -# suppresses any "Segmentation fault" message there. '((' could -# trigger a bug in pdksh 5.2.14. -for as_var in BASH_ENV ENV MAIL MAILPATH -do eval test x\${$as_var+set} = xset \ - && ( (unset $as_var) || exit 1) >/dev/null 2>&1 && unset $as_var || : -done -PS1='$ ' -PS2='> ' -PS4='+ ' - -# NLS nuisances. -LC_ALL=C -export LC_ALL -LANGUAGE=C -export LANGUAGE - -# CDPATH. -(unset CDPATH) >/dev/null 2>&1 && unset CDPATH - - -@%:@ as_fn_error STATUS ERROR [LINENO LOG_FD] -@%:@ ---------------------------------------- -@%:@ Output "`basename @S|@0`: error: ERROR" to stderr. If LINENO and LOG_FD are -@%:@ provided, also output the error to LOG_FD, referencing LINENO. Then exit the -@%:@ script with STATUS, using 1 if that was 0. -as_fn_error () -{ - as_status=$1; test $as_status -eq 0 && as_status=1 - if test "$4"; then - as_lineno=${as_lineno-"$3"} as_lineno_stack=as_lineno_stack=$as_lineno_stack - $as_echo "$as_me:${as_lineno-$LINENO}: error: $2" >&$4 - fi - $as_echo "$as_me: error: $2" >&2 - as_fn_exit $as_status -} @%:@ as_fn_error - - -@%:@ as_fn_set_status STATUS -@%:@ ----------------------- -@%:@ Set @S|@? to STATUS, without forking. -as_fn_set_status () -{ - return $1 -} @%:@ as_fn_set_status - -@%:@ as_fn_exit STATUS -@%:@ ----------------- -@%:@ Exit the shell with STATUS, even in a "trap 0" or "set -e" context. -as_fn_exit () -{ - set +e - as_fn_set_status $1 - exit $1 -} @%:@ as_fn_exit - -@%:@ as_fn_unset VAR -@%:@ --------------- -@%:@ Portably unset VAR. -as_fn_unset () -{ - { eval $1=; unset $1;} -} -as_unset=as_fn_unset -@%:@ as_fn_append VAR VALUE -@%:@ ---------------------- -@%:@ Append the text in VALUE to the end of the definition contained in VAR. Take -@%:@ advantage of any shell optimizations that allow amortized linear growth over -@%:@ repeated appends, instead of the typical quadratic growth present in naive -@%:@ implementations. -if (eval "as_var=1; as_var+=2; test x\$as_var = x12") 2>/dev/null; then : - eval 'as_fn_append () - { - eval $1+=\$2 - }' -else - as_fn_append () - { - eval $1=\$$1\$2 - } -fi # as_fn_append - -@%:@ as_fn_arith ARG... -@%:@ ------------------ -@%:@ Perform arithmetic evaluation on the ARGs, and store the result in the -@%:@ global @S|@as_val. Take advantage of shells that can avoid forks. The arguments -@%:@ must be portable across @S|@(()) and expr. -if (eval "test \$(( 1 + 1 )) = 2") 2>/dev/null; then : - eval 'as_fn_arith () - { - as_val=$(( $* )) - }' -else - as_fn_arith () - { - as_val=`expr "$@" || test $? -eq 1` - } -fi # as_fn_arith - - -if expr a : '\(a\)' >/dev/null 2>&1 && - test "X`expr 00001 : '.*\(...\)'`" = X001; then - as_expr=expr -else - as_expr=false -fi - -if (basename -- /) >/dev/null 2>&1 && test "X`basename -- / 2>&1`" = "X/"; then - as_basename=basename -else - as_basename=false -fi - -if (as_dir=`dirname -- /` && test "X$as_dir" = X/) >/dev/null 2>&1; then - as_dirname=dirname -else - as_dirname=false -fi - -as_me=`$as_basename -- "$0" || -$as_expr X/"$0" : '.*/\([^/][^/]*\)/*$' \| \ - X"$0" : 'X\(//\)$' \| \ - X"$0" : 'X\(/\)' \| . 2>/dev/null || -$as_echo X/"$0" | - sed '/^.*\/\([^/][^/]*\)\/*$/{ - s//\1/ - q - } - /^X\/\(\/\/\)$/{ - s//\1/ - q - } - /^X\/\(\/\).*/{ - s//\1/ - q - } - s/.*/./; q'` - -# Avoid depending upon Character Ranges. -as_cr_letters='abcdefghijklmnopqrstuvwxyz' -as_cr_LETTERS='ABCDEFGHIJKLMNOPQRSTUVWXYZ' -as_cr_Letters=$as_cr_letters$as_cr_LETTERS -as_cr_digits='0123456789' -as_cr_alnum=$as_cr_Letters$as_cr_digits - -ECHO_C= ECHO_N= ECHO_T= -case `echo -n x` in @%:@((((( --n*) - case `echo 'xy\c'` in - *c*) ECHO_T=' ';; # ECHO_T is single tab character. - xy) ECHO_C='\c';; - *) echo `echo ksh88 bug on AIX 6.1` > /dev/null - ECHO_T=' ';; - esac;; -*) - ECHO_N='-n';; -esac - -rm -f conf$$ conf$$.exe conf$$.file -if test -d conf$$.dir; then - rm -f conf$$.dir/conf$$.file -else - rm -f conf$$.dir - mkdir conf$$.dir 2>/dev/null -fi -if (echo >conf$$.file) 2>/dev/null; then - if ln -s conf$$.file conf$$ 2>/dev/null; then - as_ln_s='ln -s' - # ... but there are two gotchas: - # 1) On MSYS, both `ln -s file dir' and `ln file dir' fail. - # 2) DJGPP < 2.04 has no symlinks; `ln -s' creates a wrapper executable. - # In both cases, we have to default to `cp -pR'. - ln -s conf$$.file conf$$.dir 2>/dev/null && test ! -f conf$$.exe || - as_ln_s='cp -pR' - elif ln conf$$.file conf$$ 2>/dev/null; then - as_ln_s=ln - else - as_ln_s='cp -pR' - fi -else - as_ln_s='cp -pR' -fi -rm -f conf$$ conf$$.exe conf$$.dir/conf$$.file conf$$.file -rmdir conf$$.dir 2>/dev/null - - -@%:@ as_fn_mkdir_p -@%:@ ------------- -@%:@ Create "@S|@as_dir" as a directory, including parents if necessary. -as_fn_mkdir_p () -{ - - case $as_dir in #( - -*) as_dir=./$as_dir;; - esac - test -d "$as_dir" || eval $as_mkdir_p || { - as_dirs= - while :; do - case $as_dir in #( - *\'*) as_qdir=`$as_echo "$as_dir" | sed "s/'/'\\\\\\\\''/g"`;; #'( - *) as_qdir=$as_dir;; - esac - as_dirs="'$as_qdir' $as_dirs" - as_dir=`$as_dirname -- "$as_dir" || -$as_expr X"$as_dir" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \ - X"$as_dir" : 'X\(//\)[^/]' \| \ - X"$as_dir" : 'X\(//\)$' \| \ - X"$as_dir" : 'X\(/\)' \| . 2>/dev/null || -$as_echo X"$as_dir" | - sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ - s//\1/ - q - } - /^X\(\/\/\)[^/].*/{ - s//\1/ - q - } - /^X\(\/\/\)$/{ - s//\1/ - q - } - /^X\(\/\).*/{ - s//\1/ - q - } - s/.*/./; q'` - test -d "$as_dir" && break - done - test -z "$as_dirs" || eval "mkdir $as_dirs" - } || test -d "$as_dir" || as_fn_error $? "cannot create directory $as_dir" - - -} @%:@ as_fn_mkdir_p -if mkdir -p . 2>/dev/null; then - as_mkdir_p='mkdir -p "$as_dir"' -else - test -d ./-p && rmdir ./-p - as_mkdir_p=false -fi - - -@%:@ as_fn_executable_p FILE -@%:@ ----------------------- -@%:@ Test if FILE is an executable regular file. -as_fn_executable_p () -{ - test -f "$1" && test -x "$1" -} @%:@ as_fn_executable_p -as_test_x='test -x' -as_executable_p=as_fn_executable_p - -# Sed expression to map a string onto a valid CPP name. -as_tr_cpp="eval sed 'y%*$as_cr_letters%P$as_cr_LETTERS%;s%[^_$as_cr_alnum]%_%g'" - -# Sed expression to map a string onto a valid variable name. -as_tr_sh="eval sed 'y%*+%pp%;s%[^_$as_cr_alnum]%_%g'" - - -exec 6>&1 -## ----------------------------------- ## -## Main body of $CONFIG_STATUS script. ## -## ----------------------------------- ## -_ASEOF -test $as_write_fail = 0 && chmod +x $CONFIG_STATUS || ac_write_fail=1 - -cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1 -# Save the log message, to keep $0 and so on meaningful, and to -# report actual input values of CONFIG_FILES etc. instead of their -# values after options handling. -ac_log=" -This file was extended by autohello $as_me 1.1, which was -generated by GNU Autoconf 2.69. Invocation command line was - - CONFIG_FILES = $CONFIG_FILES - CONFIG_HEADERS = $CONFIG_HEADERS - CONFIG_LINKS = $CONFIG_LINKS - CONFIG_COMMANDS = $CONFIG_COMMANDS - $ $0 $@ - -on `(hostname || uname -n) 2>/dev/null | sed 1q` -" - -_ACEOF - -case $ac_config_files in *" -"*) set x $ac_config_files; shift; ac_config_files=$*;; -esac - -case $ac_config_headers in *" -"*) set x $ac_config_headers; shift; ac_config_headers=$*;; -esac - - -cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1 -# Files that config.status was made for. -config_files="$ac_config_files" -config_headers="$ac_config_headers" -config_commands="$ac_config_commands" - -_ACEOF - -cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1 -ac_cs_usage="\ -\`$as_me' instantiates files and other configuration actions -from templates according to the current configuration. Unless the files -and actions are specified as TAGs, all are instantiated by default. - -Usage: $0 [OPTION]... [TAG]... - - -h, --help print this help, then exit - -V, --version print version number and configuration settings, then exit - --config print configuration, then exit - -q, --quiet, --silent - do not print progress messages - -d, --debug don't remove temporary files - --recheck update $as_me by reconfiguring in the same conditions - --file=FILE[:TEMPLATE] - instantiate the configuration file FILE - --header=FILE[:TEMPLATE] - instantiate the configuration header FILE - -Configuration files: -$config_files - -Configuration headers: -$config_headers - -Configuration commands: -$config_commands - -Report bugs to ." - -_ACEOF -cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1 -ac_cs_config="`$as_echo "$ac_configure_args" | sed 's/^ //; s/[\\""\`\$]/\\\\&/g'`" -ac_cs_version="\\ -autohello config.status 1.1 -configured by $0, generated by GNU Autoconf 2.69, - with options \\"\$ac_cs_config\\" - -Copyright (C) 2012 Free Software Foundation, Inc. -This config.status script is free software; the Free Software Foundation -gives unlimited permission to copy, distribute and modify it." - -ac_pwd='$ac_pwd' -srcdir='$srcdir' -INSTALL='$INSTALL' -MKDIR_P='$MKDIR_P' -AWK='$AWK' -test -n "\$AWK" || AWK=awk -_ACEOF - -cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1 -# The default lists apply if the user does not specify any file. -ac_need_defaults=: -while test $# != 0 -do - case $1 in - --*=?*) - ac_option=`expr "X$1" : 'X\([^=]*\)='` - ac_optarg=`expr "X$1" : 'X[^=]*=\(.*\)'` - ac_shift=: - ;; - --*=) - ac_option=`expr "X$1" : 'X\([^=]*\)='` - ac_optarg= - ac_shift=: - ;; - *) - ac_option=$1 - ac_optarg=$2 - ac_shift=shift - ;; - esac - - case $ac_option in - # Handling of the options. - -recheck | --recheck | --rechec | --reche | --rech | --rec | --re | --r) - ac_cs_recheck=: ;; - --version | --versio | --versi | --vers | --ver | --ve | --v | -V ) - $as_echo "$ac_cs_version"; exit ;; - --config | --confi | --conf | --con | --co | --c ) - $as_echo "$ac_cs_config"; exit ;; - --debug | --debu | --deb | --de | --d | -d ) - debug=: ;; - --file | --fil | --fi | --f ) - $ac_shift - case $ac_optarg in - *\'*) ac_optarg=`$as_echo "$ac_optarg" | sed "s/'/'\\\\\\\\''/g"` ;; - '') as_fn_error $? "missing file argument" ;; - esac - as_fn_append CONFIG_FILES " '$ac_optarg'" - ac_need_defaults=false;; - --header | --heade | --head | --hea ) - $ac_shift - case $ac_optarg in - *\'*) ac_optarg=`$as_echo "$ac_optarg" | sed "s/'/'\\\\\\\\''/g"` ;; - esac - as_fn_append CONFIG_HEADERS " '$ac_optarg'" - ac_need_defaults=false;; - --he | --h) - # Conflict between --help and --header - as_fn_error $? "ambiguous option: \`$1' -Try \`$0 --help' for more information.";; - --help | --hel | -h ) - $as_echo "$ac_cs_usage"; exit ;; - -q | -quiet | --quiet | --quie | --qui | --qu | --q \ - | -silent | --silent | --silen | --sile | --sil | --si | --s) - ac_cs_silent=: ;; - - # This is an error. - -*) as_fn_error $? "unrecognized option: \`$1' -Try \`$0 --help' for more information." ;; - - *) as_fn_append ac_config_targets " $1" - ac_need_defaults=false ;; - - esac - shift -done - -ac_configure_extra_args= - -if $ac_cs_silent; then - exec 6>/dev/null - ac_configure_extra_args="$ac_configure_extra_args --silent" -fi - -_ACEOF -cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1 -if \$ac_cs_recheck; then - set X $SHELL '$0' $ac_configure_args \$ac_configure_extra_args --no-create --no-recursion - shift - \$as_echo "running CONFIG_SHELL=$SHELL \$*" >&6 - CONFIG_SHELL='$SHELL' - export CONFIG_SHELL - exec "\$@" -fi - -_ACEOF -cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1 -exec 5>>config.log -{ - echo - sed 'h;s/./-/g;s/^.../@%:@@%:@ /;s/...$/ @%:@@%:@/;p;x;p;x' <<_ASBOX -@%:@@%:@ Running $as_me. @%:@@%:@ -_ASBOX - $as_echo "$ac_log" -} >&5 - -_ACEOF -cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1 -# -# INIT-COMMANDS -# -AMDEP_TRUE="$AMDEP_TRUE" ac_aux_dir="$ac_aux_dir" - -_ACEOF - -cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1 - -# Handling of arguments. -for ac_config_target in $ac_config_targets -do - case $ac_config_target in - "config.h") CONFIG_HEADERS="$CONFIG_HEADERS config.h" ;; - "depfiles") CONFIG_COMMANDS="$CONFIG_COMMANDS depfiles" ;; - "Makefile") CONFIG_FILES="$CONFIG_FILES Makefile" ;; - - *) as_fn_error $? "invalid argument: \`$ac_config_target'" "$LINENO" 5;; - esac -done - - -# If the user did not use the arguments to specify the items to instantiate, -# then the envvar interface is used. Set only those that are not. -# We use the long form for the default assignment because of an extremely -# bizarre bug on SunOS 4.1.3. -if $ac_need_defaults; then - test "${CONFIG_FILES+set}" = set || CONFIG_FILES=$config_files - test "${CONFIG_HEADERS+set}" = set || CONFIG_HEADERS=$config_headers - test "${CONFIG_COMMANDS+set}" = set || CONFIG_COMMANDS=$config_commands -fi - -# Have a temporary directory for convenience. Make it in the build tree -# simply because there is no reason against having it here, and in addition, -# creating and moving files from /tmp can sometimes cause problems. -# Hook for its removal unless debugging. -# Note that there is a small window in which the directory will not be cleaned: -# after its creation but before its name has been assigned to `$tmp'. -$debug || -{ - tmp= ac_tmp= - trap 'exit_status=$? - : "${ac_tmp:=$tmp}" - { test ! -d "$ac_tmp" || rm -fr "$ac_tmp"; } && exit $exit_status -' 0 - trap 'as_fn_exit 1' 1 2 13 15 -} -# Create a (secure) tmp directory for tmp files. - -{ - tmp=`(umask 077 && mktemp -d "./confXXXXXX") 2>/dev/null` && - test -d "$tmp" -} || -{ - tmp=./conf$$-$RANDOM - (umask 077 && mkdir "$tmp") -} || as_fn_error $? "cannot create a temporary directory in ." "$LINENO" 5 -ac_tmp=$tmp - -# Set up the scripts for CONFIG_FILES section. -# No need to generate them if there are no CONFIG_FILES. -# This happens for instance with `./config.status config.h'. -if test -n "$CONFIG_FILES"; then - - -ac_cr=`echo X | tr X '\015'` -# On cygwin, bash can eat \r inside `` if the user requested igncr. -# But we know of no other shell where ac_cr would be empty at this -# point, so we can use a bashism as a fallback. -if test "x$ac_cr" = x; then - eval ac_cr=\$\'\\r\' -fi -ac_cs_awk_cr=`$AWK 'BEGIN { print "a\rb" }' /dev/null` -if test "$ac_cs_awk_cr" = "a${ac_cr}b"; then - ac_cs_awk_cr='\\r' -else - ac_cs_awk_cr=$ac_cr -fi - -echo 'BEGIN {' >"$ac_tmp/subs1.awk" && -_ACEOF - - -{ - echo "cat >conf$$subs.awk <<_ACEOF" && - echo "$ac_subst_vars" | sed 's/.*/&!$&$ac_delim/' && - echo "_ACEOF" -} >conf$$subs.sh || - as_fn_error $? "could not make $CONFIG_STATUS" "$LINENO" 5 -ac_delim_num=`echo "$ac_subst_vars" | grep -c '^'` -ac_delim='%!_!# ' -for ac_last_try in false false false false false :; do - . ./conf$$subs.sh || - as_fn_error $? "could not make $CONFIG_STATUS" "$LINENO" 5 - - ac_delim_n=`sed -n "s/.*$ac_delim\$/X/p" conf$$subs.awk | grep -c X` - if test $ac_delim_n = $ac_delim_num; then - break - elif $ac_last_try; then - as_fn_error $? "could not make $CONFIG_STATUS" "$LINENO" 5 - else - ac_delim="$ac_delim!$ac_delim _$ac_delim!! " - fi -done -rm -f conf$$subs.sh - -cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1 -cat >>"\$ac_tmp/subs1.awk" <<\\_ACAWK && -_ACEOF -sed -n ' -h -s/^/S["/; s/!.*/"]=/ -p -g -s/^[^!]*!// -:repl -t repl -s/'"$ac_delim"'$// -t delim -:nl -h -s/\(.\{148\}\)..*/\1/ -t more1 -s/["\\]/\\&/g; s/^/"/; s/$/\\n"\\/ -p -n -b repl -:more1 -s/["\\]/\\&/g; s/^/"/; s/$/"\\/ -p -g -s/.\{148\}// -t nl -:delim -h -s/\(.\{148\}\)..*/\1/ -t more2 -s/["\\]/\\&/g; s/^/"/; s/$/"/ -p -b -:more2 -s/["\\]/\\&/g; s/^/"/; s/$/"\\/ -p -g -s/.\{148\}// -t delim -' >$CONFIG_STATUS || ac_write_fail=1 -rm -f conf$$subs.awk -cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1 -_ACAWK -cat >>"\$ac_tmp/subs1.awk" <<_ACAWK && - for (key in S) S_is_set[key] = 1 - FS = "" - -} -{ - line = $ 0 - nfields = split(line, field, "@") - substed = 0 - len = length(field[1]) - for (i = 2; i < nfields; i++) { - key = field[i] - keylen = length(key) - if (S_is_set[key]) { - value = S[key] - line = substr(line, 1, len) "" value "" substr(line, len + keylen + 3) - len += length(value) + length(field[++i]) - substed = 1 - } else - len += 1 + keylen - } - - print line -} - -_ACAWK -_ACEOF -cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1 -if sed "s/$ac_cr//" < /dev/null > /dev/null 2>&1; then - sed "s/$ac_cr\$//; s/$ac_cr/$ac_cs_awk_cr/g" -else - cat -fi < "$ac_tmp/subs1.awk" > "$ac_tmp/subs.awk" \ - || as_fn_error $? "could not setup config files machinery" "$LINENO" 5 -_ACEOF - -# VPATH may cause trouble with some makes, so we remove sole $(srcdir), -# ${srcdir} and @srcdir@ entries from VPATH if srcdir is ".", strip leading and -# trailing colons and then remove the whole line if VPATH becomes empty -# (actually we leave an empty line to preserve line numbers). -if test "x$srcdir" = x.; then - ac_vpsub='/^[ ]*VPATH[ ]*=[ ]*/{ -h -s/// -s/^/:/ -s/[ ]*$/:/ -s/:\$(srcdir):/:/g -s/:\${srcdir}:/:/g -s/:@srcdir@:/:/g -s/^:*// -s/:*$// -x -s/\(=[ ]*\).*/\1/ -G -s/\n// -s/^[^=]*=[ ]*$// -}' -fi - -cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1 -fi # test -n "$CONFIG_FILES" - -# Set up the scripts for CONFIG_HEADERS section. -# No need to generate them if there are no CONFIG_HEADERS. -# This happens for instance with `./config.status Makefile'. -if test -n "$CONFIG_HEADERS"; then -cat >"$ac_tmp/defines.awk" <<\_ACAWK || -BEGIN { -_ACEOF - -# Transform confdefs.h into an awk script `defines.awk', embedded as -# here-document in config.status, that substitutes the proper values into -# config.h.in to produce config.h. - -# Create a delimiter string that does not exist in confdefs.h, to ease -# handling of long lines. -ac_delim='%!_!# ' -for ac_last_try in false false :; do - ac_tt=`sed -n "/$ac_delim/p" confdefs.h` - if test -z "$ac_tt"; then - break - elif $ac_last_try; then - as_fn_error $? "could not make $CONFIG_HEADERS" "$LINENO" 5 - else - ac_delim="$ac_delim!$ac_delim _$ac_delim!! " - fi -done - -# For the awk script, D is an array of macro values keyed by name, -# likewise P contains macro parameters if any. Preserve backslash -# newline sequences. - -ac_word_re=[_$as_cr_Letters][_$as_cr_alnum]* -sed -n ' -s/.\{148\}/&'"$ac_delim"'/g -t rset -:rset -s/^[ ]*#[ ]*define[ ][ ]*/ / -t def -d -:def -s/\\$// -t bsnl -s/["\\]/\\&/g -s/^ \('"$ac_word_re"'\)\(([^()]*)\)[ ]*\(.*\)/P["\1"]="\2"\ -D["\1"]=" \3"/p -s/^ \('"$ac_word_re"'\)[ ]*\(.*\)/D["\1"]=" \2"/p -d -:bsnl -s/["\\]/\\&/g -s/^ \('"$ac_word_re"'\)\(([^()]*)\)[ ]*\(.*\)/P["\1"]="\2"\ -D["\1"]=" \3\\\\\\n"\\/p -t cont -s/^ \('"$ac_word_re"'\)[ ]*\(.*\)/D["\1"]=" \2\\\\\\n"\\/p -t cont -d -:cont -n -s/.\{148\}/&'"$ac_delim"'/g -t clear -:clear -s/\\$// -t bsnlc -s/["\\]/\\&/g; s/^/"/; s/$/"/p -d -:bsnlc -s/["\\]/\\&/g; s/^/"/; s/$/\\\\\\n"\\/p -b cont -' >$CONFIG_STATUS || ac_write_fail=1 - -cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1 - for (key in D) D_is_set[key] = 1 - FS = "" -} -/^[\t ]*#[\t ]*(define|undef)[\t ]+$ac_word_re([\t (]|\$)/ { - line = \$ 0 - split(line, arg, " ") - if (arg[1] == "#") { - defundef = arg[2] - mac1 = arg[3] - } else { - defundef = substr(arg[1], 2) - mac1 = arg[2] - } - split(mac1, mac2, "(") #) - macro = mac2[1] - prefix = substr(line, 1, index(line, defundef) - 1) - if (D_is_set[macro]) { - # Preserve the white space surrounding the "#". - print prefix "define", macro P[macro] D[macro] - next - } else { - # Replace #undef with comments. This is necessary, for example, - # in the case of _POSIX_SOURCE, which is predefined and required - # on some systems where configure will not decide to define it. - if (defundef == "undef") { - print "/*", prefix defundef, macro, "*/" - next - } - } -} -{ print } -_ACAWK -_ACEOF -cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1 - as_fn_error $? "could not setup config headers machinery" "$LINENO" 5 -fi # test -n "$CONFIG_HEADERS" - - -eval set X " :F $CONFIG_FILES :H $CONFIG_HEADERS :C $CONFIG_COMMANDS" -shift -for ac_tag -do - case $ac_tag in - :[FHLC]) ac_mode=$ac_tag; continue;; - esac - case $ac_mode$ac_tag in - :[FHL]*:*);; - :L* | :C*:*) as_fn_error $? "invalid tag \`$ac_tag'" "$LINENO" 5;; - :[FH]-) ac_tag=-:-;; - :[FH]*) ac_tag=$ac_tag:$ac_tag.in;; - esac - ac_save_IFS=$IFS - IFS=: - set x $ac_tag - IFS=$ac_save_IFS - shift - ac_file=$1 - shift - - case $ac_mode in - :L) ac_source=$1;; - :[FH]) - ac_file_inputs= - for ac_f - do - case $ac_f in - -) ac_f="$ac_tmp/stdin";; - *) # Look for the file first in the build tree, then in the source tree - # (if the path is not absolute). The absolute path cannot be DOS-style, - # because $ac_f cannot contain `:'. - test -f "$ac_f" || - case $ac_f in - [\\/$]*) false;; - *) test -f "$srcdir/$ac_f" && ac_f="$srcdir/$ac_f";; - esac || - as_fn_error 1 "cannot find input file: \`$ac_f'" "$LINENO" 5;; - esac - case $ac_f in *\'*) ac_f=`$as_echo "$ac_f" | sed "s/'/'\\\\\\\\''/g"`;; esac - as_fn_append ac_file_inputs " '$ac_f'" - done - - # Let's still pretend it is `configure' which instantiates (i.e., don't - # use $as_me), people would be surprised to read: - # /* config.h. Generated by config.status. */ - configure_input='Generated from '` - $as_echo "$*" | sed 's|^[^:]*/||;s|:[^:]*/|, |g' - `' by configure.' - if test x"$ac_file" != x-; then - configure_input="$ac_file. $configure_input" - { $as_echo "$as_me:${as_lineno-$LINENO}: creating $ac_file" >&5 -$as_echo "$as_me: creating $ac_file" >&6;} - fi - # Neutralize special characters interpreted by sed in replacement strings. - case $configure_input in #( - *\&* | *\|* | *\\* ) - ac_sed_conf_input=`$as_echo "$configure_input" | - sed 's/[\\\\&|]/\\\\&/g'`;; #( - *) ac_sed_conf_input=$configure_input;; - esac - - case $ac_tag in - *:-:* | *:-) cat >"$ac_tmp/stdin" \ - || as_fn_error $? "could not create $ac_file" "$LINENO" 5 ;; - esac - ;; - esac - - ac_dir=`$as_dirname -- "$ac_file" || -$as_expr X"$ac_file" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \ - X"$ac_file" : 'X\(//\)[^/]' \| \ - X"$ac_file" : 'X\(//\)$' \| \ - X"$ac_file" : 'X\(/\)' \| . 2>/dev/null || -$as_echo X"$ac_file" | - sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ - s//\1/ - q - } - /^X\(\/\/\)[^/].*/{ - s//\1/ - q - } - /^X\(\/\/\)$/{ - s//\1/ - q - } - /^X\(\/\).*/{ - s//\1/ - q - } - s/.*/./; q'` - as_dir="$ac_dir"; as_fn_mkdir_p - ac_builddir=. - -case "$ac_dir" in -.) ac_dir_suffix= ac_top_builddir_sub=. ac_top_build_prefix= ;; -*) - ac_dir_suffix=/`$as_echo "$ac_dir" | sed 's|^\.[\\/]||'` - # A ".." for each directory in $ac_dir_suffix. - ac_top_builddir_sub=`$as_echo "$ac_dir_suffix" | sed 's|/[^\\/]*|/..|g;s|/||'` - case $ac_top_builddir_sub in - "") ac_top_builddir_sub=. ac_top_build_prefix= ;; - *) ac_top_build_prefix=$ac_top_builddir_sub/ ;; - esac ;; -esac -ac_abs_top_builddir=$ac_pwd -ac_abs_builddir=$ac_pwd$ac_dir_suffix -# for backward compatibility: -ac_top_builddir=$ac_top_build_prefix - -case $srcdir in - .) # We are building in place. - ac_srcdir=. - ac_top_srcdir=$ac_top_builddir_sub - ac_abs_top_srcdir=$ac_pwd ;; - [\\/]* | ?:[\\/]* ) # Absolute name. - ac_srcdir=$srcdir$ac_dir_suffix; - ac_top_srcdir=$srcdir - ac_abs_top_srcdir=$srcdir ;; - *) # Relative name. - ac_srcdir=$ac_top_build_prefix$srcdir$ac_dir_suffix - ac_top_srcdir=$ac_top_build_prefix$srcdir - ac_abs_top_srcdir=$ac_pwd/$srcdir ;; -esac -ac_abs_srcdir=$ac_abs_top_srcdir$ac_dir_suffix - - - case $ac_mode in - :F) - # - # CONFIG_FILE - # - - case $INSTALL in - [\\/$]* | ?:[\\/]* ) ac_INSTALL=$INSTALL ;; - *) ac_INSTALL=$ac_top_build_prefix$INSTALL ;; - esac - ac_MKDIR_P=$MKDIR_P - case $MKDIR_P in - [\\/$]* | ?:[\\/]* ) ;; - */*) ac_MKDIR_P=$ac_top_build_prefix$MKDIR_P ;; - esac -_ACEOF - -cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1 -# If the template does not know about datarootdir, expand it. -# FIXME: This hack should be removed a few years after 2.60. -ac_datarootdir_hack=; ac_datarootdir_seen= -ac_sed_dataroot=' -/datarootdir/ { - p - q -} -/@datadir@/p -/@docdir@/p -/@infodir@/p -/@localedir@/p -/@mandir@/p' -case `eval "sed -n \"\$ac_sed_dataroot\" $ac_file_inputs"` in -*datarootdir*) ac_datarootdir_seen=yes;; -*@datadir@*|*@docdir@*|*@infodir@*|*@localedir@*|*@mandir@*) - { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: $ac_file_inputs seems to ignore the --datarootdir setting" >&5 -$as_echo "$as_me: WARNING: $ac_file_inputs seems to ignore the --datarootdir setting" >&2;} -_ACEOF -cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1 - ac_datarootdir_hack=' - s&@datadir@&$datadir&g - s&@docdir@&$docdir&g - s&@infodir@&$infodir&g - s&@localedir@&$localedir&g - s&@mandir@&$mandir&g - s&\\\${datarootdir}&$datarootdir&g' ;; -esac -_ACEOF - -# Neutralize VPATH when `$srcdir' = `.'. -# Shell code in configure.ac might set extrasub. -# FIXME: do we really want to maintain this feature? -cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1 -ac_sed_extra="$ac_vpsub -$extrasub -_ACEOF -cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1 -:t -/@[a-zA-Z_][a-zA-Z_0-9]*@/!b -s|@configure_input@|$ac_sed_conf_input|;t t -s&@top_builddir@&$ac_top_builddir_sub&;t t -s&@top_build_prefix@&$ac_top_build_prefix&;t t -s&@srcdir@&$ac_srcdir&;t t -s&@abs_srcdir@&$ac_abs_srcdir&;t t -s&@top_srcdir@&$ac_top_srcdir&;t t -s&@abs_top_srcdir@&$ac_abs_top_srcdir&;t t -s&@builddir@&$ac_builddir&;t t -s&@abs_builddir@&$ac_abs_builddir&;t t -s&@abs_top_builddir@&$ac_abs_top_builddir&;t t -s&@INSTALL@&$ac_INSTALL&;t t -s&@MKDIR_P@&$ac_MKDIR_P&;t t -$ac_datarootdir_hack -" -eval sed \"\$ac_sed_extra\" "$ac_file_inputs" | $AWK -f "$ac_tmp/subs.awk" \ - >$ac_tmp/out || as_fn_error $? "could not create $ac_file" "$LINENO" 5 - -test -z "$ac_datarootdir_hack$ac_datarootdir_seen" && - { ac_out=`sed -n '/\${datarootdir}/p' "$ac_tmp/out"`; test -n "$ac_out"; } && - { ac_out=`sed -n '/^[ ]*datarootdir[ ]*:*=/p' \ - "$ac_tmp/out"`; test -z "$ac_out"; } && - { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: $ac_file contains a reference to the variable \`datarootdir' -which seems to be undefined. Please make sure it is defined" >&5 -$as_echo "$as_me: WARNING: $ac_file contains a reference to the variable \`datarootdir' -which seems to be undefined. Please make sure it is defined" >&2;} - - rm -f "$ac_tmp/stdin" - case $ac_file in - -) cat "$ac_tmp/out" && rm -f "$ac_tmp/out";; - *) rm -f "$ac_file" && mv "$ac_tmp/out" "$ac_file";; - esac \ - || as_fn_error $? "could not create $ac_file" "$LINENO" 5 - ;; - :H) - # - # CONFIG_HEADER - # - if test x"$ac_file" != x-; then - { - $as_echo "/* $configure_input */" \ - && eval '$AWK -f "$ac_tmp/defines.awk"' "$ac_file_inputs" - } >"$ac_tmp/config.h" \ - || as_fn_error $? "could not create $ac_file" "$LINENO" 5 - if diff "$ac_file" "$ac_tmp/config.h" >/dev/null 2>&1; then - { $as_echo "$as_me:${as_lineno-$LINENO}: $ac_file is unchanged" >&5 -$as_echo "$as_me: $ac_file is unchanged" >&6;} - else - rm -f "$ac_file" - mv "$ac_tmp/config.h" "$ac_file" \ - || as_fn_error $? "could not create $ac_file" "$LINENO" 5 - fi - else - $as_echo "/* $configure_input */" \ - && eval '$AWK -f "$ac_tmp/defines.awk"' "$ac_file_inputs" \ - || as_fn_error $? "could not create -" "$LINENO" 5 - fi -# Compute "$ac_file"'s index in $config_headers. -_am_arg="$ac_file" -_am_stamp_count=1 -for _am_header in $config_headers :; do - case $_am_header in - $_am_arg | $_am_arg:* ) - break ;; - * ) - _am_stamp_count=`expr $_am_stamp_count + 1` ;; - esac -done -echo "timestamp for $_am_arg" >`$as_dirname -- "$_am_arg" || -$as_expr X"$_am_arg" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \ - X"$_am_arg" : 'X\(//\)[^/]' \| \ - X"$_am_arg" : 'X\(//\)$' \| \ - X"$_am_arg" : 'X\(/\)' \| . 2>/dev/null || -$as_echo X"$_am_arg" | - sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ - s//\1/ - q - } - /^X\(\/\/\)[^/].*/{ - s//\1/ - q - } - /^X\(\/\/\)$/{ - s//\1/ - q - } - /^X\(\/\).*/{ - s//\1/ - q - } - s/.*/./; q'`/stamp-h$_am_stamp_count - ;; - - :C) { $as_echo "$as_me:${as_lineno-$LINENO}: executing $ac_file commands" >&5 -$as_echo "$as_me: executing $ac_file commands" >&6;} - ;; - esac - - - case $ac_file$ac_mode in - "depfiles":C) test x"$AMDEP_TRUE" != x"" || { - # Older Autoconf quotes --file arguments for eval, but not when files - # are listed without --file. Let's play safe and only enable the eval - # if we detect the quoting. - case $CONFIG_FILES in - *\'*) eval set x "$CONFIG_FILES" ;; - *) set x $CONFIG_FILES ;; - esac - shift - for mf - do - # Strip MF so we end up with the name of the file. - mf=`echo "$mf" | sed -e 's/:.*$//'` - # Check whether this is an Automake generated Makefile or not. - # We used to match only the files named 'Makefile.in', but - # some people rename them; so instead we look at the file content. - # Grep'ing the first line is not enough: some people post-process - # each Makefile.in and add a new line on top of each file to say so. - # Grep'ing the whole file is not good either: AIX grep has a line - # limit of 2048, but all sed's we know have understand at least 4000. - if sed -n 's,^#.*generated by automake.*,X,p' "$mf" | grep X >/dev/null 2>&1; then - dirpart=`$as_dirname -- "$mf" || -$as_expr X"$mf" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \ - X"$mf" : 'X\(//\)[^/]' \| \ - X"$mf" : 'X\(//\)$' \| \ - X"$mf" : 'X\(/\)' \| . 2>/dev/null || -$as_echo X"$mf" | - sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ - s//\1/ - q - } - /^X\(\/\/\)[^/].*/{ - s//\1/ - q - } - /^X\(\/\/\)$/{ - s//\1/ - q - } - /^X\(\/\).*/{ - s//\1/ - q - } - s/.*/./; q'` - else - continue - fi - # Extract the definition of DEPDIR, am__include, and am__quote - # from the Makefile without running 'make'. - DEPDIR=`sed -n 's/^DEPDIR = //p' < "$mf"` - test -z "$DEPDIR" && continue - am__include=`sed -n 's/^am__include = //p' < "$mf"` - test -z "$am__include" && continue - am__quote=`sed -n 's/^am__quote = //p' < "$mf"` - # Find all dependency output files, they are included files with - # $(DEPDIR) in their names. We invoke sed twice because it is the - # simplest approach to changing $(DEPDIR) to its actual value in the - # expansion. - for file in `sed -n " - s/^$am__include $am__quote\(.*(DEPDIR).*\)$am__quote"'$/\1/p' <"$mf" | \ - sed -e 's/\$(DEPDIR)/'"$DEPDIR"'/g'`; do - # Make sure the directory exists. - test -f "$dirpart/$file" && continue - fdir=`$as_dirname -- "$file" || -$as_expr X"$file" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \ - X"$file" : 'X\(//\)[^/]' \| \ - X"$file" : 'X\(//\)$' \| \ - X"$file" : 'X\(/\)' \| . 2>/dev/null || -$as_echo X"$file" | - sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ - s//\1/ - q - } - /^X\(\/\/\)[^/].*/{ - s//\1/ - q - } - /^X\(\/\/\)$/{ - s//\1/ - q - } - /^X\(\/\).*/{ - s//\1/ - q - } - s/.*/./; q'` - as_dir=$dirpart/$fdir; as_fn_mkdir_p - # echo "creating $dirpart/$file" - echo '# dummy' > "$dirpart/$file" - done - done -} - ;; - - esac -done # for ac_tag - - -as_fn_exit 0 -_ACEOF -ac_clean_files=$ac_clean_files_save - -test $ac_write_fail = 0 || - as_fn_error $? "write failure creating $CONFIG_STATUS" "$LINENO" 5 - - -# configure is writing to config.log, and then calls config.status. -# config.status does its own redirection, appending to config.log. -# Unfortunately, on DOS this fails, as config.log is still kept open -# by configure, so config.status won't be able to write to it; its -# output is simply discarded. So we exec the FD to /dev/null, -# effectively closing config.log, so it can be properly (re)opened and -# appended to by config.status. When coming back to configure, we -# need to make the FD available again. -if test "$no_create" != yes; then - ac_cs_success=: - ac_config_status_args= - test "$silent" = yes && - ac_config_status_args="$ac_config_status_args --quiet" - exec 5>/dev/null - $SHELL $CONFIG_STATUS $ac_config_status_args || ac_cs_success=false - exec 5>>config.log - # Use ||, not &&, to avoid exiting from the if with $? = 1, which - # would make configure fail if this is the last instruction. - $ac_cs_success || as_fn_exit 1 -fi -if test -n "$ac_unrecognized_opts" && test "$enable_option_checking" != no; then - { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: unrecognized options: $ac_unrecognized_opts" >&5 -$as_echo "$as_me: WARNING: unrecognized options: $ac_unrecognized_opts" >&2;} -fi - diff --git a/distribution/yocto-advanced/poky/meta-mini/recipes-hello/autohello/files/autohello/autom4te.cache/output.1 b/distribution/yocto-advanced/poky/meta-mini/recipes-hello/autohello/files/autohello/autom4te.cache/output.1 deleted file mode 100644 index d8629ca..0000000 --- a/distribution/yocto-advanced/poky/meta-mini/recipes-hello/autohello/files/autohello/autom4te.cache/output.1 +++ /dev/null @@ -1,4905 +0,0 @@ -@%:@! /bin/sh -@%:@ Guess values for system-dependent variables and create Makefiles. -@%:@ Generated by GNU Autoconf 2.69 for autohello 1.1. -@%:@ -@%:@ Report bugs to . -@%:@ -@%:@ -@%:@ Copyright (C) 1992-1996, 1998-2012 Free Software Foundation, Inc. -@%:@ -@%:@ -@%:@ This configure script is free software; the Free Software Foundation -@%:@ gives unlimited permission to copy, distribute and modify it. -## -------------------- ## -## M4sh Initialization. ## -## -------------------- ## - -# Be more Bourne compatible -DUALCASE=1; export DUALCASE # for MKS sh -if test -n "${ZSH_VERSION+set}" && (emulate sh) >/dev/null 2>&1; then : - emulate sh - NULLCMD=: - # Pre-4.2 versions of Zsh do word splitting on ${1+"$@"}, which - # is contrary to our usage. Disable this feature. - alias -g '${1+"$@"}'='"$@"' - setopt NO_GLOB_SUBST -else - case `(set -o) 2>/dev/null` in @%:@( - *posix*) : - set -o posix ;; @%:@( - *) : - ;; -esac -fi - - -as_nl=' -' -export as_nl -# Printing a long string crashes Solaris 7 /usr/bin/printf. -as_echo='\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\' -as_echo=$as_echo$as_echo$as_echo$as_echo$as_echo -as_echo=$as_echo$as_echo$as_echo$as_echo$as_echo$as_echo -# Prefer a ksh shell builtin over an external printf program on Solaris, -# but without wasting forks for bash or zsh. -if test -z "$BASH_VERSION$ZSH_VERSION" \ - && (test "X`print -r -- $as_echo`" = "X$as_echo") 2>/dev/null; then - as_echo='print -r --' - as_echo_n='print -rn --' -elif (test "X`printf %s $as_echo`" = "X$as_echo") 2>/dev/null; then - as_echo='printf %s\n' - as_echo_n='printf %s' -else - if test "X`(/usr/ucb/echo -n -n $as_echo) 2>/dev/null`" = "X-n $as_echo"; then - as_echo_body='eval /usr/ucb/echo -n "$1$as_nl"' - as_echo_n='/usr/ucb/echo -n' - else - as_echo_body='eval expr "X$1" : "X\\(.*\\)"' - as_echo_n_body='eval - arg=$1; - case $arg in @%:@( - *"$as_nl"*) - expr "X$arg" : "X\\(.*\\)$as_nl"; - arg=`expr "X$arg" : ".*$as_nl\\(.*\\)"`;; - esac; - expr "X$arg" : "X\\(.*\\)" | tr -d "$as_nl" - ' - export as_echo_n_body - as_echo_n='sh -c $as_echo_n_body as_echo' - fi - export as_echo_body - as_echo='sh -c $as_echo_body as_echo' -fi - -# The user is always right. -if test "${PATH_SEPARATOR+set}" != set; then - PATH_SEPARATOR=: - (PATH='/bin;/bin'; FPATH=$PATH; sh -c :) >/dev/null 2>&1 && { - (PATH='/bin:/bin'; FPATH=$PATH; sh -c :) >/dev/null 2>&1 || - PATH_SEPARATOR=';' - } -fi - - -# IFS -# We need space, tab and new line, in precisely that order. Quoting is -# there to prevent editors from complaining about space-tab. -# (If _AS_PATH_WALK were called with IFS unset, it would disable word -# splitting by setting IFS to empty value.) -IFS=" "" $as_nl" - -# Find who we are. Look in the path if we contain no directory separator. -as_myself= -case $0 in @%:@(( - *[\\/]* ) as_myself=$0 ;; - *) as_save_IFS=$IFS; IFS=$PATH_SEPARATOR -for as_dir in $PATH -do - IFS=$as_save_IFS - test -z "$as_dir" && as_dir=. - test -r "$as_dir/$0" && as_myself=$as_dir/$0 && break - done -IFS=$as_save_IFS - - ;; -esac -# We did not find ourselves, most probably we were run as `sh COMMAND' -# in which case we are not to be found in the path. -if test "x$as_myself" = x; then - as_myself=$0 -fi -if test ! -f "$as_myself"; then - $as_echo "$as_myself: error: cannot find myself; rerun with an absolute file name" >&2 - exit 1 -fi - -# Unset variables that we do not need and which cause bugs (e.g. in -# pre-3.0 UWIN ksh). But do not cause bugs in bash 2.01; the "|| exit 1" -# suppresses any "Segmentation fault" message there. '((' could -# trigger a bug in pdksh 5.2.14. -for as_var in BASH_ENV ENV MAIL MAILPATH -do eval test x\${$as_var+set} = xset \ - && ( (unset $as_var) || exit 1) >/dev/null 2>&1 && unset $as_var || : -done -PS1='$ ' -PS2='> ' -PS4='+ ' - -# NLS nuisances. -LC_ALL=C -export LC_ALL -LANGUAGE=C -export LANGUAGE - -# CDPATH. -(unset CDPATH) >/dev/null 2>&1 && unset CDPATH - -# Use a proper internal environment variable to ensure we don't fall - # into an infinite loop, continuously re-executing ourselves. - if test x"${_as_can_reexec}" != xno && test "x$CONFIG_SHELL" != x; then - _as_can_reexec=no; export _as_can_reexec; - # We cannot yet assume a decent shell, so we have to provide a -# neutralization value for shells without unset; and this also -# works around shells that cannot unset nonexistent variables. -# Preserve -v and -x to the replacement shell. -BASH_ENV=/dev/null -ENV=/dev/null -(unset BASH_ENV) >/dev/null 2>&1 && unset BASH_ENV ENV -case $- in @%:@ (((( - *v*x* | *x*v* ) as_opts=-vx ;; - *v* ) as_opts=-v ;; - *x* ) as_opts=-x ;; - * ) as_opts= ;; -esac -exec $CONFIG_SHELL $as_opts "$as_myself" ${1+"$@"} -# Admittedly, this is quite paranoid, since all the known shells bail -# out after a failed `exec'. -$as_echo "$0: could not re-execute with $CONFIG_SHELL" >&2 -as_fn_exit 255 - fi - # We don't want this to propagate to other subprocesses. - { _as_can_reexec=; unset _as_can_reexec;} -if test "x$CONFIG_SHELL" = x; then - as_bourne_compatible="if test -n \"\${ZSH_VERSION+set}\" && (emulate sh) >/dev/null 2>&1; then : - emulate sh - NULLCMD=: - # Pre-4.2 versions of Zsh do word splitting on \${1+\"\$@\"}, which - # is contrary to our usage. Disable this feature. - alias -g '\${1+\"\$@\"}'='\"\$@\"' - setopt NO_GLOB_SUBST -else - case \`(set -o) 2>/dev/null\` in @%:@( - *posix*) : - set -o posix ;; @%:@( - *) : - ;; -esac -fi -" - as_required="as_fn_return () { (exit \$1); } -as_fn_success () { as_fn_return 0; } -as_fn_failure () { as_fn_return 1; } -as_fn_ret_success () { return 0; } -as_fn_ret_failure () { return 1; } - -exitcode=0 -as_fn_success || { exitcode=1; echo as_fn_success failed.; } -as_fn_failure && { exitcode=1; echo as_fn_failure succeeded.; } -as_fn_ret_success || { exitcode=1; echo as_fn_ret_success failed.; } -as_fn_ret_failure && { exitcode=1; echo as_fn_ret_failure succeeded.; } -if ( set x; as_fn_ret_success y && test x = \"\$1\" ); then : - -else - exitcode=1; echo positional parameters were not saved. -fi -test x\$exitcode = x0 || exit 1 -test -x / || exit 1" - as_suggested=" as_lineno_1=";as_suggested=$as_suggested$LINENO;as_suggested=$as_suggested" as_lineno_1a=\$LINENO - as_lineno_2=";as_suggested=$as_suggested$LINENO;as_suggested=$as_suggested" as_lineno_2a=\$LINENO - eval 'test \"x\$as_lineno_1'\$as_run'\" != \"x\$as_lineno_2'\$as_run'\" && - test \"x\`expr \$as_lineno_1'\$as_run' + 1\`\" = \"x\$as_lineno_2'\$as_run'\"' || exit 1" - if (eval "$as_required") 2>/dev/null; then : - as_have_required=yes -else - as_have_required=no -fi - if test x$as_have_required = xyes && (eval "$as_suggested") 2>/dev/null; then : - -else - as_save_IFS=$IFS; IFS=$PATH_SEPARATOR -as_found=false -for as_dir in /bin$PATH_SEPARATOR/usr/bin$PATH_SEPARATOR$PATH -do - IFS=$as_save_IFS - test -z "$as_dir" && as_dir=. - as_found=: - case $as_dir in @%:@( - /*) - for as_base in sh bash ksh sh5; do - # Try only shells that exist, to save several forks. - as_shell=$as_dir/$as_base - if { test -f "$as_shell" || test -f "$as_shell.exe"; } && - { $as_echo "$as_bourne_compatible""$as_required" | as_run=a "$as_shell"; } 2>/dev/null; then : - CONFIG_SHELL=$as_shell as_have_required=yes - if { $as_echo "$as_bourne_compatible""$as_suggested" | as_run=a "$as_shell"; } 2>/dev/null; then : - break 2 -fi -fi - done;; - esac - as_found=false -done -$as_found || { if { test -f "$SHELL" || test -f "$SHELL.exe"; } && - { $as_echo "$as_bourne_compatible""$as_required" | as_run=a "$SHELL"; } 2>/dev/null; then : - CONFIG_SHELL=$SHELL as_have_required=yes -fi; } -IFS=$as_save_IFS - - - if test "x$CONFIG_SHELL" != x; then : - export CONFIG_SHELL - # We cannot yet assume a decent shell, so we have to provide a -# neutralization value for shells without unset; and this also -# works around shells that cannot unset nonexistent variables. -# Preserve -v and -x to the replacement shell. -BASH_ENV=/dev/null -ENV=/dev/null -(unset BASH_ENV) >/dev/null 2>&1 && unset BASH_ENV ENV -case $- in @%:@ (((( - *v*x* | *x*v* ) as_opts=-vx ;; - *v* ) as_opts=-v ;; - *x* ) as_opts=-x ;; - * ) as_opts= ;; -esac -exec $CONFIG_SHELL $as_opts "$as_myself" ${1+"$@"} -# Admittedly, this is quite paranoid, since all the known shells bail -# out after a failed `exec'. -$as_echo "$0: could not re-execute with $CONFIG_SHELL" >&2 -exit 255 -fi - - if test x$as_have_required = xno; then : - $as_echo "$0: This script requires a shell more modern than all" - $as_echo "$0: the shells that I found on your system." - if test x${ZSH_VERSION+set} = xset ; then - $as_echo "$0: In particular, zsh $ZSH_VERSION has bugs and should" - $as_echo "$0: be upgraded to zsh 4.3.4 or later." - else - $as_echo "$0: Please tell bug-autoconf@gnu.org and -$0: maunt@linutronix.de about your system, including any -$0: error possibly output before this message. Then install -$0: a modern shell, or manually run the script under such a -$0: shell if you do have one." - fi - exit 1 -fi -fi -fi -SHELL=${CONFIG_SHELL-/bin/sh} -export SHELL -# Unset more variables known to interfere with behavior of common tools. -CLICOLOR_FORCE= GREP_OPTIONS= -unset CLICOLOR_FORCE GREP_OPTIONS - -## --------------------- ## -## M4sh Shell Functions. ## -## --------------------- ## -@%:@ as_fn_unset VAR -@%:@ --------------- -@%:@ Portably unset VAR. -as_fn_unset () -{ - { eval $1=; unset $1;} -} -as_unset=as_fn_unset - -@%:@ as_fn_set_status STATUS -@%:@ ----------------------- -@%:@ Set @S|@? to STATUS, without forking. -as_fn_set_status () -{ - return $1 -} @%:@ as_fn_set_status - -@%:@ as_fn_exit STATUS -@%:@ ----------------- -@%:@ Exit the shell with STATUS, even in a "trap 0" or "set -e" context. -as_fn_exit () -{ - set +e - as_fn_set_status $1 - exit $1 -} @%:@ as_fn_exit - -@%:@ as_fn_mkdir_p -@%:@ ------------- -@%:@ Create "@S|@as_dir" as a directory, including parents if necessary. -as_fn_mkdir_p () -{ - - case $as_dir in #( - -*) as_dir=./$as_dir;; - esac - test -d "$as_dir" || eval $as_mkdir_p || { - as_dirs= - while :; do - case $as_dir in #( - *\'*) as_qdir=`$as_echo "$as_dir" | sed "s/'/'\\\\\\\\''/g"`;; #'( - *) as_qdir=$as_dir;; - esac - as_dirs="'$as_qdir' $as_dirs" - as_dir=`$as_dirname -- "$as_dir" || -$as_expr X"$as_dir" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \ - X"$as_dir" : 'X\(//\)[^/]' \| \ - X"$as_dir" : 'X\(//\)$' \| \ - X"$as_dir" : 'X\(/\)' \| . 2>/dev/null || -$as_echo X"$as_dir" | - sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ - s//\1/ - q - } - /^X\(\/\/\)[^/].*/{ - s//\1/ - q - } - /^X\(\/\/\)$/{ - s//\1/ - q - } - /^X\(\/\).*/{ - s//\1/ - q - } - s/.*/./; q'` - test -d "$as_dir" && break - done - test -z "$as_dirs" || eval "mkdir $as_dirs" - } || test -d "$as_dir" || as_fn_error $? "cannot create directory $as_dir" - - -} @%:@ as_fn_mkdir_p - -@%:@ as_fn_executable_p FILE -@%:@ ----------------------- -@%:@ Test if FILE is an executable regular file. -as_fn_executable_p () -{ - test -f "$1" && test -x "$1" -} @%:@ as_fn_executable_p -@%:@ as_fn_append VAR VALUE -@%:@ ---------------------- -@%:@ Append the text in VALUE to the end of the definition contained in VAR. Take -@%:@ advantage of any shell optimizations that allow amortized linear growth over -@%:@ repeated appends, instead of the typical quadratic growth present in naive -@%:@ implementations. -if (eval "as_var=1; as_var+=2; test x\$as_var = x12") 2>/dev/null; then : - eval 'as_fn_append () - { - eval $1+=\$2 - }' -else - as_fn_append () - { - eval $1=\$$1\$2 - } -fi # as_fn_append - -@%:@ as_fn_arith ARG... -@%:@ ------------------ -@%:@ Perform arithmetic evaluation on the ARGs, and store the result in the -@%:@ global @S|@as_val. Take advantage of shells that can avoid forks. The arguments -@%:@ must be portable across @S|@(()) and expr. -if (eval "test \$(( 1 + 1 )) = 2") 2>/dev/null; then : - eval 'as_fn_arith () - { - as_val=$(( $* )) - }' -else - as_fn_arith () - { - as_val=`expr "$@" || test $? -eq 1` - } -fi # as_fn_arith - - -@%:@ as_fn_error STATUS ERROR [LINENO LOG_FD] -@%:@ ---------------------------------------- -@%:@ Output "`basename @S|@0`: error: ERROR" to stderr. If LINENO and LOG_FD are -@%:@ provided, also output the error to LOG_FD, referencing LINENO. Then exit the -@%:@ script with STATUS, using 1 if that was 0. -as_fn_error () -{ - as_status=$1; test $as_status -eq 0 && as_status=1 - if test "$4"; then - as_lineno=${as_lineno-"$3"} as_lineno_stack=as_lineno_stack=$as_lineno_stack - $as_echo "$as_me:${as_lineno-$LINENO}: error: $2" >&$4 - fi - $as_echo "$as_me: error: $2" >&2 - as_fn_exit $as_status -} @%:@ as_fn_error - -if expr a : '\(a\)' >/dev/null 2>&1 && - test "X`expr 00001 : '.*\(...\)'`" = X001; then - as_expr=expr -else - as_expr=false -fi - -if (basename -- /) >/dev/null 2>&1 && test "X`basename -- / 2>&1`" = "X/"; then - as_basename=basename -else - as_basename=false -fi - -if (as_dir=`dirname -- /` && test "X$as_dir" = X/) >/dev/null 2>&1; then - as_dirname=dirname -else - as_dirname=false -fi - -as_me=`$as_basename -- "$0" || -$as_expr X/"$0" : '.*/\([^/][^/]*\)/*$' \| \ - X"$0" : 'X\(//\)$' \| \ - X"$0" : 'X\(/\)' \| . 2>/dev/null || -$as_echo X/"$0" | - sed '/^.*\/\([^/][^/]*\)\/*$/{ - s//\1/ - q - } - /^X\/\(\/\/\)$/{ - s//\1/ - q - } - /^X\/\(\/\).*/{ - s//\1/ - q - } - s/.*/./; q'` - -# Avoid depending upon Character Ranges. -as_cr_letters='abcdefghijklmnopqrstuvwxyz' -as_cr_LETTERS='ABCDEFGHIJKLMNOPQRSTUVWXYZ' -as_cr_Letters=$as_cr_letters$as_cr_LETTERS -as_cr_digits='0123456789' -as_cr_alnum=$as_cr_Letters$as_cr_digits - - - as_lineno_1=$LINENO as_lineno_1a=$LINENO - as_lineno_2=$LINENO as_lineno_2a=$LINENO - eval 'test "x$as_lineno_1'$as_run'" != "x$as_lineno_2'$as_run'" && - test "x`expr $as_lineno_1'$as_run' + 1`" = "x$as_lineno_2'$as_run'"' || { - # Blame Lee E. McMahon (1931-1989) for sed's syntax. :-) - sed -n ' - p - /[$]LINENO/= - ' <$as_myself | - sed ' - s/[$]LINENO.*/&-/ - t lineno - b - :lineno - N - :loop - s/[$]LINENO\([^'$as_cr_alnum'_].*\n\)\(.*\)/\2\1\2/ - t loop - s/-\n.*// - ' >$as_me.lineno && - chmod +x "$as_me.lineno" || - { $as_echo "$as_me: error: cannot create $as_me.lineno; rerun with a POSIX shell" >&2; as_fn_exit 1; } - - # If we had to re-execute with $CONFIG_SHELL, we're ensured to have - # already done that, so ensure we don't try to do so again and fall - # in an infinite loop. This has already happened in practice. - _as_can_reexec=no; export _as_can_reexec - # Don't try to exec as it changes $[0], causing all sort of problems - # (the dirname of $[0] is not the place where we might find the - # original and so on. Autoconf is especially sensitive to this). - . "./$as_me.lineno" - # Exit status is that of the last command. - exit -} - -ECHO_C= ECHO_N= ECHO_T= -case `echo -n x` in @%:@((((( --n*) - case `echo 'xy\c'` in - *c*) ECHO_T=' ';; # ECHO_T is single tab character. - xy) ECHO_C='\c';; - *) echo `echo ksh88 bug on AIX 6.1` > /dev/null - ECHO_T=' ';; - esac;; -*) - ECHO_N='-n';; -esac - -rm -f conf$$ conf$$.exe conf$$.file -if test -d conf$$.dir; then - rm -f conf$$.dir/conf$$.file -else - rm -f conf$$.dir - mkdir conf$$.dir 2>/dev/null -fi -if (echo >conf$$.file) 2>/dev/null; then - if ln -s conf$$.file conf$$ 2>/dev/null; then - as_ln_s='ln -s' - # ... but there are two gotchas: - # 1) On MSYS, both `ln -s file dir' and `ln file dir' fail. - # 2) DJGPP < 2.04 has no symlinks; `ln -s' creates a wrapper executable. - # In both cases, we have to default to `cp -pR'. - ln -s conf$$.file conf$$.dir 2>/dev/null && test ! -f conf$$.exe || - as_ln_s='cp -pR' - elif ln conf$$.file conf$$ 2>/dev/null; then - as_ln_s=ln - else - as_ln_s='cp -pR' - fi -else - as_ln_s='cp -pR' -fi -rm -f conf$$ conf$$.exe conf$$.dir/conf$$.file conf$$.file -rmdir conf$$.dir 2>/dev/null - -if mkdir -p . 2>/dev/null; then - as_mkdir_p='mkdir -p "$as_dir"' -else - test -d ./-p && rmdir ./-p - as_mkdir_p=false -fi - -as_test_x='test -x' -as_executable_p=as_fn_executable_p - -# Sed expression to map a string onto a valid CPP name. -as_tr_cpp="eval sed 'y%*$as_cr_letters%P$as_cr_LETTERS%;s%[^_$as_cr_alnum]%_%g'" - -# Sed expression to map a string onto a valid variable name. -as_tr_sh="eval sed 'y%*+%pp%;s%[^_$as_cr_alnum]%_%g'" - - -test -n "$DJDIR" || exec 7<&0 &1 - -# Name of the host. -# hostname on some systems (SVR3.2, old GNU/Linux) returns a bogus exit status, -# so uname gets run too. -ac_hostname=`(hostname || uname -n) 2>/dev/null | sed 1q` - -# -# Initializations. -# -ac_default_prefix=/usr/local -ac_clean_files= -ac_config_libobj_dir=. -LIB@&t@OBJS= -cross_compiling=no -subdirs= -MFLAGS= -MAKEFLAGS= - -# Identity of this package. -PACKAGE_NAME='autohello' -PACKAGE_TARNAME='autohello' -PACKAGE_VERSION='1.1' -PACKAGE_STRING='autohello 1.1' -PACKAGE_BUGREPORT='maunt@linutronix.de' -PACKAGE_URL='' - -ac_unique_file="autohello.c" -ac_subst_vars='am__EXEEXT_FALSE -am__EXEEXT_TRUE -LTLIBOBJS -LIB@&t@OBJS -am__fastdepCC_FALSE -am__fastdepCC_TRUE -CCDEPMODE -am__nodep -AMDEPBACKSLASH -AMDEP_FALSE -AMDEP_TRUE -am__quote -am__include -DEPDIR -OBJEXT -EXEEXT -ac_ct_CC -CPPFLAGS -LDFLAGS -CFLAGS -CC -AM_BACKSLASH -AM_DEFAULT_VERBOSITY -AM_DEFAULT_V -AM_V -am__untar -am__tar -AMTAR -am__leading_dot -SET_MAKE -AWK -mkdir_p -MKDIR_P -INSTALL_STRIP_PROGRAM -STRIP -install_sh -MAKEINFO -AUTOHEADER -AUTOMAKE -AUTOCONF -ACLOCAL -VERSION -PACKAGE -CYGPATH_W -am__isrc -INSTALL_DATA -INSTALL_SCRIPT -INSTALL_PROGRAM -target_alias -host_alias -build_alias -LIBS -ECHO_T -ECHO_N -ECHO_C -DEFS -mandir -localedir -libdir -psdir -pdfdir -dvidir -htmldir -infodir -docdir -oldincludedir -includedir -localstatedir -sharedstatedir -sysconfdir -datadir -datarootdir -libexecdir -sbindir -bindir -program_transform_name -prefix -exec_prefix -PACKAGE_URL -PACKAGE_BUGREPORT -PACKAGE_STRING -PACKAGE_VERSION -PACKAGE_TARNAME -PACKAGE_NAME -PATH_SEPARATOR -SHELL' -ac_subst_files='' -ac_user_opts=' -enable_option_checking -enable_silent_rules -enable_dependency_tracking -' - ac_precious_vars='build_alias -host_alias -target_alias -CC -CFLAGS -LDFLAGS -LIBS -CPPFLAGS' - - -# Initialize some variables set by options. -ac_init_help= -ac_init_version=false -ac_unrecognized_opts= -ac_unrecognized_sep= -# The variables have the same names as the options, with -# dashes changed to underlines. -cache_file=/dev/null -exec_prefix=NONE -no_create= -no_recursion= -prefix=NONE -program_prefix=NONE -program_suffix=NONE -program_transform_name=s,x,x, -silent= -site= -srcdir= -verbose= -x_includes=NONE -x_libraries=NONE - -# Installation directory options. -# These are left unexpanded so users can "make install exec_prefix=/foo" -# and all the variables that are supposed to be based on exec_prefix -# by default will actually change. -# Use braces instead of parens because sh, perl, etc. also accept them. -# (The list follows the same order as the GNU Coding Standards.) -bindir='${exec_prefix}/bin' -sbindir='${exec_prefix}/sbin' -libexecdir='${exec_prefix}/libexec' -datarootdir='${prefix}/share' -datadir='${datarootdir}' -sysconfdir='${prefix}/etc' -sharedstatedir='${prefix}/com' -localstatedir='${prefix}/var' -includedir='${prefix}/include' -oldincludedir='/usr/include' -docdir='${datarootdir}/doc/${PACKAGE_TARNAME}' -infodir='${datarootdir}/info' -htmldir='${docdir}' -dvidir='${docdir}' -pdfdir='${docdir}' -psdir='${docdir}' -libdir='${exec_prefix}/lib' -localedir='${datarootdir}/locale' -mandir='${datarootdir}/man' - -ac_prev= -ac_dashdash= -for ac_option -do - # If the previous option needs an argument, assign it. - if test -n "$ac_prev"; then - eval $ac_prev=\$ac_option - ac_prev= - continue - fi - - case $ac_option in - *=?*) ac_optarg=`expr "X$ac_option" : '[^=]*=\(.*\)'` ;; - *=) ac_optarg= ;; - *) ac_optarg=yes ;; - esac - - # Accept the important Cygnus configure options, so we can diagnose typos. - - case $ac_dashdash$ac_option in - --) - ac_dashdash=yes ;; - - -bindir | --bindir | --bindi | --bind | --bin | --bi) - ac_prev=bindir ;; - -bindir=* | --bindir=* | --bindi=* | --bind=* | --bin=* | --bi=*) - bindir=$ac_optarg ;; - - -build | --build | --buil | --bui | --bu) - ac_prev=build_alias ;; - -build=* | --build=* | --buil=* | --bui=* | --bu=*) - build_alias=$ac_optarg ;; - - -cache-file | --cache-file | --cache-fil | --cache-fi \ - | --cache-f | --cache- | --cache | --cach | --cac | --ca | --c) - ac_prev=cache_file ;; - -cache-file=* | --cache-file=* | --cache-fil=* | --cache-fi=* \ - | --cache-f=* | --cache-=* | --cache=* | --cach=* | --cac=* | --ca=* | --c=*) - cache_file=$ac_optarg ;; - - --config-cache | -C) - cache_file=config.cache ;; - - -datadir | --datadir | --datadi | --datad) - ac_prev=datadir ;; - -datadir=* | --datadir=* | --datadi=* | --datad=*) - datadir=$ac_optarg ;; - - -datarootdir | --datarootdir | --datarootdi | --datarootd | --dataroot \ - | --dataroo | --dataro | --datar) - ac_prev=datarootdir ;; - -datarootdir=* | --datarootdir=* | --datarootdi=* | --datarootd=* \ - | --dataroot=* | --dataroo=* | --dataro=* | --datar=*) - datarootdir=$ac_optarg ;; - - -disable-* | --disable-*) - ac_useropt=`expr "x$ac_option" : 'x-*disable-\(.*\)'` - # Reject names that are not valid shell variable names. - expr "x$ac_useropt" : ".*[^-+._$as_cr_alnum]" >/dev/null && - as_fn_error $? "invalid feature name: $ac_useropt" - ac_useropt_orig=$ac_useropt - ac_useropt=`$as_echo "$ac_useropt" | sed 's/[-+.]/_/g'` - case $ac_user_opts in - *" -"enable_$ac_useropt" -"*) ;; - *) ac_unrecognized_opts="$ac_unrecognized_opts$ac_unrecognized_sep--disable-$ac_useropt_orig" - ac_unrecognized_sep=', ';; - esac - eval enable_$ac_useropt=no ;; - - -docdir | --docdir | --docdi | --doc | --do) - ac_prev=docdir ;; - -docdir=* | --docdir=* | --docdi=* | --doc=* | --do=*) - docdir=$ac_optarg ;; - - -dvidir | --dvidir | --dvidi | --dvid | --dvi | --dv) - ac_prev=dvidir ;; - -dvidir=* | --dvidir=* | --dvidi=* | --dvid=* | --dvi=* | --dv=*) - dvidir=$ac_optarg ;; - - -enable-* | --enable-*) - ac_useropt=`expr "x$ac_option" : 'x-*enable-\([^=]*\)'` - # Reject names that are not valid shell variable names. - expr "x$ac_useropt" : ".*[^-+._$as_cr_alnum]" >/dev/null && - as_fn_error $? "invalid feature name: $ac_useropt" - ac_useropt_orig=$ac_useropt - ac_useropt=`$as_echo "$ac_useropt" | sed 's/[-+.]/_/g'` - case $ac_user_opts in - *" -"enable_$ac_useropt" -"*) ;; - *) ac_unrecognized_opts="$ac_unrecognized_opts$ac_unrecognized_sep--enable-$ac_useropt_orig" - ac_unrecognized_sep=', ';; - esac - eval enable_$ac_useropt=\$ac_optarg ;; - - -exec-prefix | --exec_prefix | --exec-prefix | --exec-prefi \ - | --exec-pref | --exec-pre | --exec-pr | --exec-p | --exec- \ - | --exec | --exe | --ex) - ac_prev=exec_prefix ;; - -exec-prefix=* | --exec_prefix=* | --exec-prefix=* | --exec-prefi=* \ - | --exec-pref=* | --exec-pre=* | --exec-pr=* | --exec-p=* | --exec-=* \ - | --exec=* | --exe=* | --ex=*) - exec_prefix=$ac_optarg ;; - - -gas | --gas | --ga | --g) - # Obsolete; use --with-gas. - with_gas=yes ;; - - -help | --help | --hel | --he | -h) - ac_init_help=long ;; - -help=r* | --help=r* | --hel=r* | --he=r* | -hr*) - ac_init_help=recursive ;; - -help=s* | --help=s* | --hel=s* | --he=s* | -hs*) - ac_init_help=short ;; - - -host | --host | --hos | --ho) - ac_prev=host_alias ;; - -host=* | --host=* | --hos=* | --ho=*) - host_alias=$ac_optarg ;; - - -htmldir | --htmldir | --htmldi | --htmld | --html | --htm | --ht) - ac_prev=htmldir ;; - -htmldir=* | --htmldir=* | --htmldi=* | --htmld=* | --html=* | --htm=* \ - | --ht=*) - htmldir=$ac_optarg ;; - - -includedir | --includedir | --includedi | --included | --include \ - | --includ | --inclu | --incl | --inc) - ac_prev=includedir ;; - -includedir=* | --includedir=* | --includedi=* | --included=* | --include=* \ - | --includ=* | --inclu=* | --incl=* | --inc=*) - includedir=$ac_optarg ;; - - -infodir | --infodir | --infodi | --infod | --info | --inf) - ac_prev=infodir ;; - -infodir=* | --infodir=* | --infodi=* | --infod=* | --info=* | --inf=*) - infodir=$ac_optarg ;; - - -libdir | --libdir | --libdi | --libd) - ac_prev=libdir ;; - -libdir=* | --libdir=* | --libdi=* | --libd=*) - libdir=$ac_optarg ;; - - -libexecdir | --libexecdir | --libexecdi | --libexecd | --libexec \ - | --libexe | --libex | --libe) - ac_prev=libexecdir ;; - -libexecdir=* | --libexecdir=* | --libexecdi=* | --libexecd=* | --libexec=* \ - | --libexe=* | --libex=* | --libe=*) - libexecdir=$ac_optarg ;; - - -localedir | --localedir | --localedi | --localed | --locale) - ac_prev=localedir ;; - -localedir=* | --localedir=* | --localedi=* | --localed=* | --locale=*) - localedir=$ac_optarg ;; - - -localstatedir | --localstatedir | --localstatedi | --localstated \ - | --localstate | --localstat | --localsta | --localst | --locals) - ac_prev=localstatedir ;; - -localstatedir=* | --localstatedir=* | --localstatedi=* | --localstated=* \ - | --localstate=* | --localstat=* | --localsta=* | --localst=* | --locals=*) - localstatedir=$ac_optarg ;; - - -mandir | --mandir | --mandi | --mand | --man | --ma | --m) - ac_prev=mandir ;; - -mandir=* | --mandir=* | --mandi=* | --mand=* | --man=* | --ma=* | --m=*) - mandir=$ac_optarg ;; - - -nfp | --nfp | --nf) - # Obsolete; use --without-fp. - with_fp=no ;; - - -no-create | --no-create | --no-creat | --no-crea | --no-cre \ - | --no-cr | --no-c | -n) - no_create=yes ;; - - -no-recursion | --no-recursion | --no-recursio | --no-recursi \ - | --no-recurs | --no-recur | --no-recu | --no-rec | --no-re | --no-r) - no_recursion=yes ;; - - -oldincludedir | --oldincludedir | --oldincludedi | --oldincluded \ - | --oldinclude | --oldinclud | --oldinclu | --oldincl | --oldinc \ - | --oldin | --oldi | --old | --ol | --o) - ac_prev=oldincludedir ;; - -oldincludedir=* | --oldincludedir=* | --oldincludedi=* | --oldincluded=* \ - | --oldinclude=* | --oldinclud=* | --oldinclu=* | --oldincl=* | --oldinc=* \ - | --oldin=* | --oldi=* | --old=* | --ol=* | --o=*) - oldincludedir=$ac_optarg ;; - - -prefix | --prefix | --prefi | --pref | --pre | --pr | --p) - ac_prev=prefix ;; - -prefix=* | --prefix=* | --prefi=* | --pref=* | --pre=* | --pr=* | --p=*) - prefix=$ac_optarg ;; - - -program-prefix | --program-prefix | --program-prefi | --program-pref \ - | --program-pre | --program-pr | --program-p) - ac_prev=program_prefix ;; - -program-prefix=* | --program-prefix=* | --program-prefi=* \ - | --program-pref=* | --program-pre=* | --program-pr=* | --program-p=*) - program_prefix=$ac_optarg ;; - - -program-suffix | --program-suffix | --program-suffi | --program-suff \ - | --program-suf | --program-su | --program-s) - ac_prev=program_suffix ;; - -program-suffix=* | --program-suffix=* | --program-suffi=* \ - | --program-suff=* | --program-suf=* | --program-su=* | --program-s=*) - program_suffix=$ac_optarg ;; - - -program-transform-name | --program-transform-name \ - | --program-transform-nam | --program-transform-na \ - | --program-transform-n | --program-transform- \ - | --program-transform | --program-transfor \ - | --program-transfo | --program-transf \ - | --program-trans | --program-tran \ - | --progr-tra | --program-tr | --program-t) - ac_prev=program_transform_name ;; - -program-transform-name=* | --program-transform-name=* \ - | --program-transform-nam=* | --program-transform-na=* \ - | --program-transform-n=* | --program-transform-=* \ - | --program-transform=* | --program-transfor=* \ - | --program-transfo=* | --program-transf=* \ - | --program-trans=* | --program-tran=* \ - | --progr-tra=* | --program-tr=* | --program-t=*) - program_transform_name=$ac_optarg ;; - - -pdfdir | --pdfdir | --pdfdi | --pdfd | --pdf | --pd) - ac_prev=pdfdir ;; - -pdfdir=* | --pdfdir=* | --pdfdi=* | --pdfd=* | --pdf=* | --pd=*) - pdfdir=$ac_optarg ;; - - -psdir | --psdir | --psdi | --psd | --ps) - ac_prev=psdir ;; - -psdir=* | --psdir=* | --psdi=* | --psd=* | --ps=*) - psdir=$ac_optarg ;; - - -q | -quiet | --quiet | --quie | --qui | --qu | --q \ - | -silent | --silent | --silen | --sile | --sil) - silent=yes ;; - - -sbindir | --sbindir | --sbindi | --sbind | --sbin | --sbi | --sb) - ac_prev=sbindir ;; - -sbindir=* | --sbindir=* | --sbindi=* | --sbind=* | --sbin=* \ - | --sbi=* | --sb=*) - sbindir=$ac_optarg ;; - - -sharedstatedir | --sharedstatedir | --sharedstatedi \ - | --sharedstated | --sharedstate | --sharedstat | --sharedsta \ - | --sharedst | --shareds | --shared | --share | --shar \ - | --sha | --sh) - ac_prev=sharedstatedir ;; - -sharedstatedir=* | --sharedstatedir=* | --sharedstatedi=* \ - | --sharedstated=* | --sharedstate=* | --sharedstat=* | --sharedsta=* \ - | --sharedst=* | --shareds=* | --shared=* | --share=* | --shar=* \ - | --sha=* | --sh=*) - sharedstatedir=$ac_optarg ;; - - -site | --site | --sit) - ac_prev=site ;; - -site=* | --site=* | --sit=*) - site=$ac_optarg ;; - - -srcdir | --srcdir | --srcdi | --srcd | --src | --sr) - ac_prev=srcdir ;; - -srcdir=* | --srcdir=* | --srcdi=* | --srcd=* | --src=* | --sr=*) - srcdir=$ac_optarg ;; - - -sysconfdir | --sysconfdir | --sysconfdi | --sysconfd | --sysconf \ - | --syscon | --sysco | --sysc | --sys | --sy) - ac_prev=sysconfdir ;; - -sysconfdir=* | --sysconfdir=* | --sysconfdi=* | --sysconfd=* | --sysconf=* \ - | --syscon=* | --sysco=* | --sysc=* | --sys=* | --sy=*) - sysconfdir=$ac_optarg ;; - - -target | --target | --targe | --targ | --tar | --ta | --t) - ac_prev=target_alias ;; - -target=* | --target=* | --targe=* | --targ=* | --tar=* | --ta=* | --t=*) - target_alias=$ac_optarg ;; - - -v | -verbose | --verbose | --verbos | --verbo | --verb) - verbose=yes ;; - - -version | --version | --versio | --versi | --vers | -V) - ac_init_version=: ;; - - -with-* | --with-*) - ac_useropt=`expr "x$ac_option" : 'x-*with-\([^=]*\)'` - # Reject names that are not valid shell variable names. - expr "x$ac_useropt" : ".*[^-+._$as_cr_alnum]" >/dev/null && - as_fn_error $? "invalid package name: $ac_useropt" - ac_useropt_orig=$ac_useropt - ac_useropt=`$as_echo "$ac_useropt" | sed 's/[-+.]/_/g'` - case $ac_user_opts in - *" -"with_$ac_useropt" -"*) ;; - *) ac_unrecognized_opts="$ac_unrecognized_opts$ac_unrecognized_sep--with-$ac_useropt_orig" - ac_unrecognized_sep=', ';; - esac - eval with_$ac_useropt=\$ac_optarg ;; - - -without-* | --without-*) - ac_useropt=`expr "x$ac_option" : 'x-*without-\(.*\)'` - # Reject names that are not valid shell variable names. - expr "x$ac_useropt" : ".*[^-+._$as_cr_alnum]" >/dev/null && - as_fn_error $? "invalid package name: $ac_useropt" - ac_useropt_orig=$ac_useropt - ac_useropt=`$as_echo "$ac_useropt" | sed 's/[-+.]/_/g'` - case $ac_user_opts in - *" -"with_$ac_useropt" -"*) ;; - *) ac_unrecognized_opts="$ac_unrecognized_opts$ac_unrecognized_sep--without-$ac_useropt_orig" - ac_unrecognized_sep=', ';; - esac - eval with_$ac_useropt=no ;; - - --x) - # Obsolete; use --with-x. - with_x=yes ;; - - -x-includes | --x-includes | --x-include | --x-includ | --x-inclu \ - | --x-incl | --x-inc | --x-in | --x-i) - ac_prev=x_includes ;; - -x-includes=* | --x-includes=* | --x-include=* | --x-includ=* | --x-inclu=* \ - | --x-incl=* | --x-inc=* | --x-in=* | --x-i=*) - x_includes=$ac_optarg ;; - - -x-libraries | --x-libraries | --x-librarie | --x-librari \ - | --x-librar | --x-libra | --x-libr | --x-lib | --x-li | --x-l) - ac_prev=x_libraries ;; - -x-libraries=* | --x-libraries=* | --x-librarie=* | --x-librari=* \ - | --x-librar=* | --x-libra=* | --x-libr=* | --x-lib=* | --x-li=* | --x-l=*) - x_libraries=$ac_optarg ;; - - -*) as_fn_error $? "unrecognized option: \`$ac_option' -Try \`$0 --help' for more information" - ;; - - *=*) - ac_envvar=`expr "x$ac_option" : 'x\([^=]*\)='` - # Reject names that are not valid shell variable names. - case $ac_envvar in #( - '' | [0-9]* | *[!_$as_cr_alnum]* ) - as_fn_error $? "invalid variable name: \`$ac_envvar'" ;; - esac - eval $ac_envvar=\$ac_optarg - export $ac_envvar ;; - - *) - # FIXME: should be removed in autoconf 3.0. - $as_echo "$as_me: WARNING: you should use --build, --host, --target" >&2 - expr "x$ac_option" : ".*[^-._$as_cr_alnum]" >/dev/null && - $as_echo "$as_me: WARNING: invalid host type: $ac_option" >&2 - : "${build_alias=$ac_option} ${host_alias=$ac_option} ${target_alias=$ac_option}" - ;; - - esac -done - -if test -n "$ac_prev"; then - ac_option=--`echo $ac_prev | sed 's/_/-/g'` - as_fn_error $? "missing argument to $ac_option" -fi - -if test -n "$ac_unrecognized_opts"; then - case $enable_option_checking in - no) ;; - fatal) as_fn_error $? "unrecognized options: $ac_unrecognized_opts" ;; - *) $as_echo "$as_me: WARNING: unrecognized options: $ac_unrecognized_opts" >&2 ;; - esac -fi - -# Check all directory arguments for consistency. -for ac_var in exec_prefix prefix bindir sbindir libexecdir datarootdir \ - datadir sysconfdir sharedstatedir localstatedir includedir \ - oldincludedir docdir infodir htmldir dvidir pdfdir psdir \ - libdir localedir mandir -do - eval ac_val=\$$ac_var - # Remove trailing slashes. - case $ac_val in - */ ) - ac_val=`expr "X$ac_val" : 'X\(.*[^/]\)' \| "X$ac_val" : 'X\(.*\)'` - eval $ac_var=\$ac_val;; - esac - # Be sure to have absolute directory names. - case $ac_val in - [\\/$]* | ?:[\\/]* ) continue;; - NONE | '' ) case $ac_var in *prefix ) continue;; esac;; - esac - as_fn_error $? "expected an absolute directory name for --$ac_var: $ac_val" -done - -# There might be people who depend on the old broken behavior: `$host' -# used to hold the argument of --host etc. -# FIXME: To remove some day. -build=$build_alias -host=$host_alias -target=$target_alias - -# FIXME: To remove some day. -if test "x$host_alias" != x; then - if test "x$build_alias" = x; then - cross_compiling=maybe - elif test "x$build_alias" != "x$host_alias"; then - cross_compiling=yes - fi -fi - -ac_tool_prefix= -test -n "$host_alias" && ac_tool_prefix=$host_alias- - -test "$silent" = yes && exec 6>/dev/null - - -ac_pwd=`pwd` && test -n "$ac_pwd" && -ac_ls_di=`ls -di .` && -ac_pwd_ls_di=`cd "$ac_pwd" && ls -di .` || - as_fn_error $? "working directory cannot be determined" -test "X$ac_ls_di" = "X$ac_pwd_ls_di" || - as_fn_error $? "pwd does not report name of working directory" - - -# Find the source files, if location was not specified. -if test -z "$srcdir"; then - ac_srcdir_defaulted=yes - # Try the directory containing this script, then the parent directory. - ac_confdir=`$as_dirname -- "$as_myself" || -$as_expr X"$as_myself" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \ - X"$as_myself" : 'X\(//\)[^/]' \| \ - X"$as_myself" : 'X\(//\)$' \| \ - X"$as_myself" : 'X\(/\)' \| . 2>/dev/null || -$as_echo X"$as_myself" | - sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ - s//\1/ - q - } - /^X\(\/\/\)[^/].*/{ - s//\1/ - q - } - /^X\(\/\/\)$/{ - s//\1/ - q - } - /^X\(\/\).*/{ - s//\1/ - q - } - s/.*/./; q'` - srcdir=$ac_confdir - if test ! -r "$srcdir/$ac_unique_file"; then - srcdir=.. - fi -else - ac_srcdir_defaulted=no -fi -if test ! -r "$srcdir/$ac_unique_file"; then - test "$ac_srcdir_defaulted" = yes && srcdir="$ac_confdir or .." - as_fn_error $? "cannot find sources ($ac_unique_file) in $srcdir" -fi -ac_msg="sources are in $srcdir, but \`cd $srcdir' does not work" -ac_abs_confdir=`( - cd "$srcdir" && test -r "./$ac_unique_file" || as_fn_error $? "$ac_msg" - pwd)` -# When building in place, set srcdir=. -if test "$ac_abs_confdir" = "$ac_pwd"; then - srcdir=. -fi -# Remove unnecessary trailing slashes from srcdir. -# Double slashes in file names in object file debugging info -# mess up M-x gdb in Emacs. -case $srcdir in -*/) srcdir=`expr "X$srcdir" : 'X\(.*[^/]\)' \| "X$srcdir" : 'X\(.*\)'`;; -esac -for ac_var in $ac_precious_vars; do - eval ac_env_${ac_var}_set=\${${ac_var}+set} - eval ac_env_${ac_var}_value=\$${ac_var} - eval ac_cv_env_${ac_var}_set=\${${ac_var}+set} - eval ac_cv_env_${ac_var}_value=\$${ac_var} -done - -# -# Report the --help message. -# -if test "$ac_init_help" = "long"; then - # Omit some internal or obsolete options to make the list less imposing. - # This message is too long to be a string in the A/UX 3.1 sh. - cat <<_ACEOF -\`configure' configures autohello 1.1 to adapt to many kinds of systems. - -Usage: $0 [OPTION]... [VAR=VALUE]... - -To assign environment variables (e.g., CC, CFLAGS...), specify them as -VAR=VALUE. See below for descriptions of some of the useful variables. - -Defaults for the options are specified in brackets. - -Configuration: - -h, --help display this help and exit - --help=short display options specific to this package - --help=recursive display the short help of all the included packages - -V, --version display version information and exit - -q, --quiet, --silent do not print \`checking ...' messages - --cache-file=FILE cache test results in FILE [disabled] - -C, --config-cache alias for \`--cache-file=config.cache' - -n, --no-create do not create output files - --srcdir=DIR find the sources in DIR [configure dir or \`..'] - -Installation directories: - --prefix=PREFIX install architecture-independent files in PREFIX - @<:@@S|@ac_default_prefix@:>@ - --exec-prefix=EPREFIX install architecture-dependent files in EPREFIX - @<:@PREFIX@:>@ - -By default, \`make install' will install all the files in -\`$ac_default_prefix/bin', \`$ac_default_prefix/lib' etc. You can specify -an installation prefix other than \`$ac_default_prefix' using \`--prefix', -for instance \`--prefix=\$HOME'. - -For better control, use the options below. - -Fine tuning of the installation directories: - --bindir=DIR user executables [EPREFIX/bin] - --sbindir=DIR system admin executables [EPREFIX/sbin] - --libexecdir=DIR program executables [EPREFIX/libexec] - --sysconfdir=DIR read-only single-machine data [PREFIX/etc] - --sharedstatedir=DIR modifiable architecture-independent data [PREFIX/com] - --localstatedir=DIR modifiable single-machine data [PREFIX/var] - --libdir=DIR object code libraries [EPREFIX/lib] - --includedir=DIR C header files [PREFIX/include] - --oldincludedir=DIR C header files for non-gcc [/usr/include] - --datarootdir=DIR read-only arch.-independent data root [PREFIX/share] - --datadir=DIR read-only architecture-independent data [DATAROOTDIR] - --infodir=DIR info documentation [DATAROOTDIR/info] - --localedir=DIR locale-dependent data [DATAROOTDIR/locale] - --mandir=DIR man documentation [DATAROOTDIR/man] - --docdir=DIR documentation root @<:@DATAROOTDIR/doc/autohello@:>@ - --htmldir=DIR html documentation [DOCDIR] - --dvidir=DIR dvi documentation [DOCDIR] - --pdfdir=DIR pdf documentation [DOCDIR] - --psdir=DIR ps documentation [DOCDIR] -_ACEOF - - cat <<\_ACEOF - -Program names: - --program-prefix=PREFIX prepend PREFIX to installed program names - --program-suffix=SUFFIX append SUFFIX to installed program names - --program-transform-name=PROGRAM run sed PROGRAM on installed program names -_ACEOF -fi - -if test -n "$ac_init_help"; then - case $ac_init_help in - short | recursive ) echo "Configuration of autohello 1.1:";; - esac - cat <<\_ACEOF - -Optional Features: - --disable-option-checking ignore unrecognized --enable/--with options - --disable-FEATURE do not include FEATURE (same as --enable-FEATURE=no) - --enable-FEATURE[=ARG] include FEATURE [ARG=yes] - --enable-silent-rules less verbose build output (undo: "make V=1") - --disable-silent-rules verbose build output (undo: "make V=0") - --enable-dependency-tracking - do not reject slow dependency extractors - --disable-dependency-tracking - speeds up one-time build - -Some influential environment variables: - CC C compiler command - CFLAGS C compiler flags - LDFLAGS linker flags, e.g. -L if you have libraries in a - nonstandard directory - LIBS libraries to pass to the linker, e.g. -l - CPPFLAGS (Objective) C/C++ preprocessor flags, e.g. -I if - you have headers in a nonstandard directory - -Use these variables to override the choices made by `configure' or to help -it to find libraries and programs with nonstandard names/locations. - -Report bugs to . -_ACEOF -ac_status=$? -fi - -if test "$ac_init_help" = "recursive"; then - # If there are subdirs, report their specific --help. - for ac_dir in : $ac_subdirs_all; do test "x$ac_dir" = x: && continue - test -d "$ac_dir" || - { cd "$srcdir" && ac_pwd=`pwd` && srcdir=. && test -d "$ac_dir"; } || - continue - ac_builddir=. - -case "$ac_dir" in -.) ac_dir_suffix= ac_top_builddir_sub=. ac_top_build_prefix= ;; -*) - ac_dir_suffix=/`$as_echo "$ac_dir" | sed 's|^\.[\\/]||'` - # A ".." for each directory in $ac_dir_suffix. - ac_top_builddir_sub=`$as_echo "$ac_dir_suffix" | sed 's|/[^\\/]*|/..|g;s|/||'` - case $ac_top_builddir_sub in - "") ac_top_builddir_sub=. ac_top_build_prefix= ;; - *) ac_top_build_prefix=$ac_top_builddir_sub/ ;; - esac ;; -esac -ac_abs_top_builddir=$ac_pwd -ac_abs_builddir=$ac_pwd$ac_dir_suffix -# for backward compatibility: -ac_top_builddir=$ac_top_build_prefix - -case $srcdir in - .) # We are building in place. - ac_srcdir=. - ac_top_srcdir=$ac_top_builddir_sub - ac_abs_top_srcdir=$ac_pwd ;; - [\\/]* | ?:[\\/]* ) # Absolute name. - ac_srcdir=$srcdir$ac_dir_suffix; - ac_top_srcdir=$srcdir - ac_abs_top_srcdir=$srcdir ;; - *) # Relative name. - ac_srcdir=$ac_top_build_prefix$srcdir$ac_dir_suffix - ac_top_srcdir=$ac_top_build_prefix$srcdir - ac_abs_top_srcdir=$ac_pwd/$srcdir ;; -esac -ac_abs_srcdir=$ac_abs_top_srcdir$ac_dir_suffix - - cd "$ac_dir" || { ac_status=$?; continue; } - # Check for guested configure. - if test -f "$ac_srcdir/configure.gnu"; then - echo && - $SHELL "$ac_srcdir/configure.gnu" --help=recursive - elif test -f "$ac_srcdir/configure"; then - echo && - $SHELL "$ac_srcdir/configure" --help=recursive - else - $as_echo "$as_me: WARNING: no configuration information is in $ac_dir" >&2 - fi || ac_status=$? - cd "$ac_pwd" || { ac_status=$?; break; } - done -fi - -test -n "$ac_init_help" && exit $ac_status -if $ac_init_version; then - cat <<\_ACEOF -autohello configure 1.1 -generated by GNU Autoconf 2.69 - -Copyright (C) 2012 Free Software Foundation, Inc. -This configure script is free software; the Free Software Foundation -gives unlimited permission to copy, distribute and modify it. -_ACEOF - exit -fi - -## ------------------------ ## -## Autoconf initialization. ## -## ------------------------ ## - -@%:@ ac_fn_c_try_compile LINENO -@%:@ -------------------------- -@%:@ Try to compile conftest.@S|@ac_ext, and return whether this succeeded. -ac_fn_c_try_compile () -{ - as_lineno=${as_lineno-"$1"} as_lineno_stack=as_lineno_stack=$as_lineno_stack - rm -f conftest.$ac_objext - if { { ac_try="$ac_compile" -case "(($ac_try" in - *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; - *) ac_try_echo=$ac_try;; -esac -eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\"" -$as_echo "$ac_try_echo"; } >&5 - (eval "$ac_compile") 2>conftest.err - ac_status=$? - if test -s conftest.err; then - grep -v '^ *+' conftest.err >conftest.er1 - cat conftest.er1 >&5 - mv -f conftest.er1 conftest.err - fi - $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 - test $ac_status = 0; } && { - test -z "$ac_c_werror_flag" || - test ! -s conftest.err - } && test -s conftest.$ac_objext; then : - ac_retval=0 -else - $as_echo "$as_me: failed program was:" >&5 -sed 's/^/| /' conftest.$ac_ext >&5 - - ac_retval=1 -fi - eval $as_lineno_stack; ${as_lineno_stack:+:} unset as_lineno - as_fn_set_status $ac_retval - -} @%:@ ac_fn_c_try_compile -cat >config.log <<_ACEOF -This file contains any messages produced by compilers while -running configure, to aid debugging if configure makes a mistake. - -It was created by autohello $as_me 1.1, which was -generated by GNU Autoconf 2.69. Invocation command line was - - $ $0 $@ - -_ACEOF -exec 5>>config.log -{ -cat <<_ASUNAME -## --------- ## -## Platform. ## -## --------- ## - -hostname = `(hostname || uname -n) 2>/dev/null | sed 1q` -uname -m = `(uname -m) 2>/dev/null || echo unknown` -uname -r = `(uname -r) 2>/dev/null || echo unknown` -uname -s = `(uname -s) 2>/dev/null || echo unknown` -uname -v = `(uname -v) 2>/dev/null || echo unknown` - -/usr/bin/uname -p = `(/usr/bin/uname -p) 2>/dev/null || echo unknown` -/bin/uname -X = `(/bin/uname -X) 2>/dev/null || echo unknown` - -/bin/arch = `(/bin/arch) 2>/dev/null || echo unknown` -/usr/bin/arch -k = `(/usr/bin/arch -k) 2>/dev/null || echo unknown` -/usr/convex/getsysinfo = `(/usr/convex/getsysinfo) 2>/dev/null || echo unknown` -/usr/bin/hostinfo = `(/usr/bin/hostinfo) 2>/dev/null || echo unknown` -/bin/machine = `(/bin/machine) 2>/dev/null || echo unknown` -/usr/bin/oslevel = `(/usr/bin/oslevel) 2>/dev/null || echo unknown` -/bin/universe = `(/bin/universe) 2>/dev/null || echo unknown` - -_ASUNAME - -as_save_IFS=$IFS; IFS=$PATH_SEPARATOR -for as_dir in $PATH -do - IFS=$as_save_IFS - test -z "$as_dir" && as_dir=. - $as_echo "PATH: $as_dir" - done -IFS=$as_save_IFS - -} >&5 - -cat >&5 <<_ACEOF - - -## ----------- ## -## Core tests. ## -## ----------- ## - -_ACEOF - - -# Keep a trace of the command line. -# Strip out --no-create and --no-recursion so they do not pile up. -# Strip out --silent because we don't want to record it for future runs. -# Also quote any args containing shell meta-characters. -# Make two passes to allow for proper duplicate-argument suppression. -ac_configure_args= -ac_configure_args0= -ac_configure_args1= -ac_must_keep_next=false -for ac_pass in 1 2 -do - for ac_arg - do - case $ac_arg in - -no-create | --no-c* | -n | -no-recursion | --no-r*) continue ;; - -q | -quiet | --quiet | --quie | --qui | --qu | --q \ - | -silent | --silent | --silen | --sile | --sil) - continue ;; - *\'*) - ac_arg=`$as_echo "$ac_arg" | sed "s/'/'\\\\\\\\''/g"` ;; - esac - case $ac_pass in - 1) as_fn_append ac_configure_args0 " '$ac_arg'" ;; - 2) - as_fn_append ac_configure_args1 " '$ac_arg'" - if test $ac_must_keep_next = true; then - ac_must_keep_next=false # Got value, back to normal. - else - case $ac_arg in - *=* | --config-cache | -C | -disable-* | --disable-* \ - | -enable-* | --enable-* | -gas | --g* | -nfp | --nf* \ - | -q | -quiet | --q* | -silent | --sil* | -v | -verb* \ - | -with-* | --with-* | -without-* | --without-* | --x) - case "$ac_configure_args0 " in - "$ac_configure_args1"*" '$ac_arg' "* ) continue ;; - esac - ;; - -* ) ac_must_keep_next=true ;; - esac - fi - as_fn_append ac_configure_args " '$ac_arg'" - ;; - esac - done -done -{ ac_configure_args0=; unset ac_configure_args0;} -{ ac_configure_args1=; unset ac_configure_args1;} - -# When interrupted or exit'd, cleanup temporary files, and complete -# config.log. We remove comments because anyway the quotes in there -# would cause problems or look ugly. -# WARNING: Use '\'' to represent an apostrophe within the trap. -# WARNING: Do not start the trap code with a newline, due to a FreeBSD 4.0 bug. -trap 'exit_status=$? - # Save into config.log some information that might help in debugging. - { - echo - - $as_echo "## ---------------- ## -## Cache variables. ## -## ---------------- ##" - echo - # The following way of writing the cache mishandles newlines in values, -( - for ac_var in `(set) 2>&1 | sed -n '\''s/^\([a-zA-Z_][a-zA-Z0-9_]*\)=.*/\1/p'\''`; do - eval ac_val=\$$ac_var - case $ac_val in #( - *${as_nl}*) - case $ac_var in #( - *_cv_*) { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: cache variable $ac_var contains a newline" >&5 -$as_echo "$as_me: WARNING: cache variable $ac_var contains a newline" >&2;} ;; - esac - case $ac_var in #( - _ | IFS | as_nl) ;; #( - BASH_ARGV | BASH_SOURCE) eval $ac_var= ;; #( - *) { eval $ac_var=; unset $ac_var;} ;; - esac ;; - esac - done - (set) 2>&1 | - case $as_nl`(ac_space='\'' '\''; set) 2>&1` in #( - *${as_nl}ac_space=\ *) - sed -n \ - "s/'\''/'\''\\\\'\'''\''/g; - s/^\\([_$as_cr_alnum]*_cv_[_$as_cr_alnum]*\\)=\\(.*\\)/\\1='\''\\2'\''/p" - ;; #( - *) - sed -n "/^[_$as_cr_alnum]*_cv_[_$as_cr_alnum]*=/p" - ;; - esac | - sort -) - echo - - $as_echo "## ----------------- ## -## Output variables. ## -## ----------------- ##" - echo - for ac_var in $ac_subst_vars - do - eval ac_val=\$$ac_var - case $ac_val in - *\'\''*) ac_val=`$as_echo "$ac_val" | sed "s/'\''/'\''\\\\\\\\'\'''\''/g"`;; - esac - $as_echo "$ac_var='\''$ac_val'\''" - done | sort - echo - - if test -n "$ac_subst_files"; then - $as_echo "## ------------------- ## -## File substitutions. ## -## ------------------- ##" - echo - for ac_var in $ac_subst_files - do - eval ac_val=\$$ac_var - case $ac_val in - *\'\''*) ac_val=`$as_echo "$ac_val" | sed "s/'\''/'\''\\\\\\\\'\'''\''/g"`;; - esac - $as_echo "$ac_var='\''$ac_val'\''" - done | sort - echo - fi - - if test -s confdefs.h; then - $as_echo "## ----------- ## -## confdefs.h. ## -## ----------- ##" - echo - cat confdefs.h - echo - fi - test "$ac_signal" != 0 && - $as_echo "$as_me: caught signal $ac_signal" - $as_echo "$as_me: exit $exit_status" - } >&5 - rm -f core *.core core.conftest.* && - rm -f -r conftest* confdefs* conf$$* $ac_clean_files && - exit $exit_status -' 0 -for ac_signal in 1 2 13 15; do - trap 'ac_signal='$ac_signal'; as_fn_exit 1' $ac_signal -done -ac_signal=0 - -# confdefs.h avoids OS command line length limits that DEFS can exceed. -rm -f -r conftest* confdefs.h - -$as_echo "/* confdefs.h */" > confdefs.h - -# Predefined preprocessor variables. - -cat >>confdefs.h <<_ACEOF -@%:@define PACKAGE_NAME "$PACKAGE_NAME" -_ACEOF - -cat >>confdefs.h <<_ACEOF -@%:@define PACKAGE_TARNAME "$PACKAGE_TARNAME" -_ACEOF - -cat >>confdefs.h <<_ACEOF -@%:@define PACKAGE_VERSION "$PACKAGE_VERSION" -_ACEOF - -cat >>confdefs.h <<_ACEOF -@%:@define PACKAGE_STRING "$PACKAGE_STRING" -_ACEOF - -cat >>confdefs.h <<_ACEOF -@%:@define PACKAGE_BUGREPORT "$PACKAGE_BUGREPORT" -_ACEOF - -cat >>confdefs.h <<_ACEOF -@%:@define PACKAGE_URL "$PACKAGE_URL" -_ACEOF - - -# Let the site file select an alternate cache file if it wants to. -# Prefer an explicitly selected file to automatically selected ones. -ac_site_file1=NONE -ac_site_file2=NONE -if test -n "$CONFIG_SITE"; then - # We do not want a PATH search for config.site. - case $CONFIG_SITE in @%:@(( - -*) ac_site_file1=./$CONFIG_SITE;; - */*) ac_site_file1=$CONFIG_SITE;; - *) ac_site_file1=./$CONFIG_SITE;; - esac -elif test "x$prefix" != xNONE; then - ac_site_file1=$prefix/share/config.site - ac_site_file2=$prefix/etc/config.site -else - ac_site_file1=$ac_default_prefix/share/config.site - ac_site_file2=$ac_default_prefix/etc/config.site -fi -for ac_site_file in "$ac_site_file1" "$ac_site_file2" -do - test "x$ac_site_file" = xNONE && continue - if test /dev/null != "$ac_site_file" && test -r "$ac_site_file"; then - { $as_echo "$as_me:${as_lineno-$LINENO}: loading site script $ac_site_file" >&5 -$as_echo "$as_me: loading site script $ac_site_file" >&6;} - sed 's/^/| /' "$ac_site_file" >&5 - . "$ac_site_file" \ - || { { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5 -$as_echo "$as_me: error: in \`$ac_pwd':" >&2;} -as_fn_error $? "failed to load site script $ac_site_file -See \`config.log' for more details" "$LINENO" 5; } - fi -done - -if test -r "$cache_file"; then - # Some versions of bash will fail to source /dev/null (special files - # actually), so we avoid doing that. DJGPP emulates it as a regular file. - if test /dev/null != "$cache_file" && test -f "$cache_file"; then - { $as_echo "$as_me:${as_lineno-$LINENO}: loading cache $cache_file" >&5 -$as_echo "$as_me: loading cache $cache_file" >&6;} - case $cache_file in - [\\/]* | ?:[\\/]* ) . "$cache_file";; - *) . "./$cache_file";; - esac - fi -else - { $as_echo "$as_me:${as_lineno-$LINENO}: creating cache $cache_file" >&5 -$as_echo "$as_me: creating cache $cache_file" >&6;} - >$cache_file -fi - -# Check that the precious variables saved in the cache have kept the same -# value. -ac_cache_corrupted=false -for ac_var in $ac_precious_vars; do - eval ac_old_set=\$ac_cv_env_${ac_var}_set - eval ac_new_set=\$ac_env_${ac_var}_set - eval ac_old_val=\$ac_cv_env_${ac_var}_value - eval ac_new_val=\$ac_env_${ac_var}_value - case $ac_old_set,$ac_new_set in - set,) - { $as_echo "$as_me:${as_lineno-$LINENO}: error: \`$ac_var' was set to \`$ac_old_val' in the previous run" >&5 -$as_echo "$as_me: error: \`$ac_var' was set to \`$ac_old_val' in the previous run" >&2;} - ac_cache_corrupted=: ;; - ,set) - { $as_echo "$as_me:${as_lineno-$LINENO}: error: \`$ac_var' was not set in the previous run" >&5 -$as_echo "$as_me: error: \`$ac_var' was not set in the previous run" >&2;} - ac_cache_corrupted=: ;; - ,);; - *) - if test "x$ac_old_val" != "x$ac_new_val"; then - # differences in whitespace do not lead to failure. - ac_old_val_w=`echo x $ac_old_val` - ac_new_val_w=`echo x $ac_new_val` - if test "$ac_old_val_w" != "$ac_new_val_w"; then - { $as_echo "$as_me:${as_lineno-$LINENO}: error: \`$ac_var' has changed since the previous run:" >&5 -$as_echo "$as_me: error: \`$ac_var' has changed since the previous run:" >&2;} - ac_cache_corrupted=: - else - { $as_echo "$as_me:${as_lineno-$LINENO}: warning: ignoring whitespace changes in \`$ac_var' since the previous run:" >&5 -$as_echo "$as_me: warning: ignoring whitespace changes in \`$ac_var' since the previous run:" >&2;} - eval $ac_var=\$ac_old_val - fi - { $as_echo "$as_me:${as_lineno-$LINENO}: former value: \`$ac_old_val'" >&5 -$as_echo "$as_me: former value: \`$ac_old_val'" >&2;} - { $as_echo "$as_me:${as_lineno-$LINENO}: current value: \`$ac_new_val'" >&5 -$as_echo "$as_me: current value: \`$ac_new_val'" >&2;} - fi;; - esac - # Pass precious variables to config.status. - if test "$ac_new_set" = set; then - case $ac_new_val in - *\'*) ac_arg=$ac_var=`$as_echo "$ac_new_val" | sed "s/'/'\\\\\\\\''/g"` ;; - *) ac_arg=$ac_var=$ac_new_val ;; - esac - case " $ac_configure_args " in - *" '$ac_arg' "*) ;; # Avoid dups. Use of quotes ensures accuracy. - *) as_fn_append ac_configure_args " '$ac_arg'" ;; - esac - fi -done -if $ac_cache_corrupted; then - { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5 -$as_echo "$as_me: error: in \`$ac_pwd':" >&2;} - { $as_echo "$as_me:${as_lineno-$LINENO}: error: changes in the environment can compromise the build" >&5 -$as_echo "$as_me: error: changes in the environment can compromise the build" >&2;} - as_fn_error $? "run \`make distclean' and/or \`rm $cache_file' and start over" "$LINENO" 5 -fi -## -------------------- ## -## Main body of script. ## -## -------------------- ## - -ac_ext=c -ac_cpp='$CPP $CPPFLAGS' -ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5' -ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5' -ac_compiler_gnu=$ac_cv_c_compiler_gnu - - -am__api_version='1.14' - -ac_aux_dir= -for ac_dir in "$srcdir" "$srcdir/.." "$srcdir/../.."; do - if test -f "$ac_dir/install-sh"; then - ac_aux_dir=$ac_dir - ac_install_sh="$ac_aux_dir/install-sh -c" - break - elif test -f "$ac_dir/install.sh"; then - ac_aux_dir=$ac_dir - ac_install_sh="$ac_aux_dir/install.sh -c" - break - elif test -f "$ac_dir/shtool"; then - ac_aux_dir=$ac_dir - ac_install_sh="$ac_aux_dir/shtool install -c" - break - fi -done -if test -z "$ac_aux_dir"; then - as_fn_error $? "cannot find install-sh, install.sh, or shtool in \"$srcdir\" \"$srcdir/..\" \"$srcdir/../..\"" "$LINENO" 5 -fi - -# These three variables are undocumented and unsupported, -# and are intended to be withdrawn in a future Autoconf release. -# They can cause serious problems if a builder's source tree is in a directory -# whose full name contains unusual characters. -ac_config_guess="$SHELL $ac_aux_dir/config.guess" # Please don't use this var. -ac_config_sub="$SHELL $ac_aux_dir/config.sub" # Please don't use this var. -ac_configure="$SHELL $ac_aux_dir/configure" # Please don't use this var. - - -# Find a good install program. We prefer a C program (faster), -# so one script is as good as another. But avoid the broken or -# incompatible versions: -# SysV /etc/install, /usr/sbin/install -# SunOS /usr/etc/install -# IRIX /sbin/install -# AIX /bin/install -# AmigaOS /C/install, which installs bootblocks on floppy discs -# AIX 4 /usr/bin/installbsd, which doesn't work without a -g flag -# AFS /usr/afsws/bin/install, which mishandles nonexistent args -# SVR4 /usr/ucb/install, which tries to use the nonexistent group "staff" -# OS/2's system install, which has a completely different semantic -# ./install, which can be erroneously created by make from ./install.sh. -# Reject install programs that cannot install multiple files. -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for a BSD-compatible install" >&5 -$as_echo_n "checking for a BSD-compatible install... " >&6; } -if test -z "$INSTALL"; then -if ${ac_cv_path_install+:} false; then : - $as_echo_n "(cached) " >&6 -else - as_save_IFS=$IFS; IFS=$PATH_SEPARATOR -for as_dir in $PATH -do - IFS=$as_save_IFS - test -z "$as_dir" && as_dir=. - # Account for people who put trailing slashes in PATH elements. -case $as_dir/ in @%:@(( - ./ | .// | /[cC]/* | \ - /etc/* | /usr/sbin/* | /usr/etc/* | /sbin/* | /usr/afsws/bin/* | \ - ?:[\\/]os2[\\/]install[\\/]* | ?:[\\/]OS2[\\/]INSTALL[\\/]* | \ - /usr/ucb/* ) ;; - *) - # OSF1 and SCO ODT 3.0 have their own names for install. - # Don't use installbsd from OSF since it installs stuff as root - # by default. - for ac_prog in ginstall scoinst install; do - for ac_exec_ext in '' $ac_executable_extensions; do - if as_fn_executable_p "$as_dir/$ac_prog$ac_exec_ext"; then - if test $ac_prog = install && - grep dspmsg "$as_dir/$ac_prog$ac_exec_ext" >/dev/null 2>&1; then - # AIX install. It has an incompatible calling convention. - : - elif test $ac_prog = install && - grep pwplus "$as_dir/$ac_prog$ac_exec_ext" >/dev/null 2>&1; then - # program-specific install script used by HP pwplus--don't use. - : - else - rm -rf conftest.one conftest.two conftest.dir - echo one > conftest.one - echo two > conftest.two - mkdir conftest.dir - if "$as_dir/$ac_prog$ac_exec_ext" -c conftest.one conftest.two "`pwd`/conftest.dir" && - test -s conftest.one && test -s conftest.two && - test -s conftest.dir/conftest.one && - test -s conftest.dir/conftest.two - then - ac_cv_path_install="$as_dir/$ac_prog$ac_exec_ext -c" - break 3 - fi - fi - fi - done - done - ;; -esac - - done -IFS=$as_save_IFS - -rm -rf conftest.one conftest.two conftest.dir - -fi - if test "${ac_cv_path_install+set}" = set; then - INSTALL=$ac_cv_path_install - else - # As a last resort, use the slow shell script. Don't cache a - # value for INSTALL within a source directory, because that will - # break other packages using the cache if that directory is - # removed, or if the value is a relative name. - INSTALL=$ac_install_sh - fi -fi -{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $INSTALL" >&5 -$as_echo "$INSTALL" >&6; } - -# Use test -z because SunOS4 sh mishandles braces in ${var-val}. -# It thinks the first close brace ends the variable substitution. -test -z "$INSTALL_PROGRAM" && INSTALL_PROGRAM='${INSTALL}' - -test -z "$INSTALL_SCRIPT" && INSTALL_SCRIPT='${INSTALL}' - -test -z "$INSTALL_DATA" && INSTALL_DATA='${INSTALL} -m 644' - -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether build environment is sane" >&5 -$as_echo_n "checking whether build environment is sane... " >&6; } -# Reject unsafe characters in $srcdir or the absolute working directory -# name. Accept space and tab only in the latter. -am_lf=' -' -case `pwd` in - *[\\\"\#\$\&\'\`$am_lf]*) - as_fn_error $? "unsafe absolute working directory name" "$LINENO" 5;; -esac -case $srcdir in - *[\\\"\#\$\&\'\`$am_lf\ \ ]*) - as_fn_error $? "unsafe srcdir value: '$srcdir'" "$LINENO" 5;; -esac - -# Do 'set' in a subshell so we don't clobber the current shell's -# arguments. Must try -L first in case configure is actually a -# symlink; some systems play weird games with the mod time of symlinks -# (eg FreeBSD returns the mod time of the symlink's containing -# directory). -if ( - am_has_slept=no - for am_try in 1 2; do - echo "timestamp, slept: $am_has_slept" > conftest.file - set X `ls -Lt "$srcdir/configure" conftest.file 2> /dev/null` - if test "$*" = "X"; then - # -L didn't work. - set X `ls -t "$srcdir/configure" conftest.file` - fi - if test "$*" != "X $srcdir/configure conftest.file" \ - && test "$*" != "X conftest.file $srcdir/configure"; then - - # If neither matched, then we have a broken ls. This can happen - # if, for instance, CONFIG_SHELL is bash and it inherits a - # broken ls alias from the environment. This has actually - # happened. Such a system could not be considered "sane". - as_fn_error $? "ls -t appears to fail. Make sure there is not a broken - alias in your environment" "$LINENO" 5 - fi - if test "$2" = conftest.file || test $am_try -eq 2; then - break - fi - # Just in case. - sleep 1 - am_has_slept=yes - done - test "$2" = conftest.file - ) -then - # Ok. - : -else - as_fn_error $? "newly created file is older than distributed files! -Check your system clock" "$LINENO" 5 -fi -{ $as_echo "$as_me:${as_lineno-$LINENO}: result: yes" >&5 -$as_echo "yes" >&6; } -# If we didn't sleep, we still need to ensure time stamps of config.status and -# generated files are strictly newer. -am_sleep_pid= -if grep 'slept: no' conftest.file >/dev/null 2>&1; then - ( sleep 1 ) & - am_sleep_pid=$! -fi - -rm -f conftest.file - -test "$program_prefix" != NONE && - program_transform_name="s&^&$program_prefix&;$program_transform_name" -# Use a double $ so make ignores it. -test "$program_suffix" != NONE && - program_transform_name="s&\$&$program_suffix&;$program_transform_name" -# Double any \ or $. -# By default was `s,x,x', remove it if useless. -ac_script='s/[\\$]/&&/g;s/;s,x,x,$//' -program_transform_name=`$as_echo "$program_transform_name" | sed "$ac_script"` - -# expand $ac_aux_dir to an absolute path -am_aux_dir=`cd $ac_aux_dir && pwd` - -if test x"${MISSING+set}" != xset; then - case $am_aux_dir in - *\ * | *\ *) - MISSING="\${SHELL} \"$am_aux_dir/missing\"" ;; - *) - MISSING="\${SHELL} $am_aux_dir/missing" ;; - esac -fi -# Use eval to expand $SHELL -if eval "$MISSING --is-lightweight"; then - am_missing_run="$MISSING " -else - am_missing_run= - { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: 'missing' script is too old or missing" >&5 -$as_echo "$as_me: WARNING: 'missing' script is too old or missing" >&2;} -fi - -if test x"${install_sh}" != xset; then - case $am_aux_dir in - *\ * | *\ *) - install_sh="\${SHELL} '$am_aux_dir/install-sh'" ;; - *) - install_sh="\${SHELL} $am_aux_dir/install-sh" - esac -fi - -# Installed binaries are usually stripped using 'strip' when the user -# run "make install-strip". However 'strip' might not be the right -# tool to use in cross-compilation environments, therefore Automake -# will honor the 'STRIP' environment variable to overrule this program. -if test "$cross_compiling" != no; then - if test -n "$ac_tool_prefix"; then - # Extract the first word of "${ac_tool_prefix}strip", so it can be a program name with args. -set dummy ${ac_tool_prefix}strip; ac_word=$2 -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 -$as_echo_n "checking for $ac_word... " >&6; } -if ${ac_cv_prog_STRIP+:} false; then : - $as_echo_n "(cached) " >&6 -else - if test -n "$STRIP"; then - ac_cv_prog_STRIP="$STRIP" # Let the user override the test. -else -as_save_IFS=$IFS; IFS=$PATH_SEPARATOR -for as_dir in $PATH -do - IFS=$as_save_IFS - test -z "$as_dir" && as_dir=. - for ac_exec_ext in '' $ac_executable_extensions; do - if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then - ac_cv_prog_STRIP="${ac_tool_prefix}strip" - $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 - break 2 - fi -done - done -IFS=$as_save_IFS - -fi -fi -STRIP=$ac_cv_prog_STRIP -if test -n "$STRIP"; then - { $as_echo "$as_me:${as_lineno-$LINENO}: result: $STRIP" >&5 -$as_echo "$STRIP" >&6; } -else - { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 -$as_echo "no" >&6; } -fi - - -fi -if test -z "$ac_cv_prog_STRIP"; then - ac_ct_STRIP=$STRIP - # Extract the first word of "strip", so it can be a program name with args. -set dummy strip; ac_word=$2 -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 -$as_echo_n "checking for $ac_word... " >&6; } -if ${ac_cv_prog_ac_ct_STRIP+:} false; then : - $as_echo_n "(cached) " >&6 -else - if test -n "$ac_ct_STRIP"; then - ac_cv_prog_ac_ct_STRIP="$ac_ct_STRIP" # Let the user override the test. -else -as_save_IFS=$IFS; IFS=$PATH_SEPARATOR -for as_dir in $PATH -do - IFS=$as_save_IFS - test -z "$as_dir" && as_dir=. - for ac_exec_ext in '' $ac_executable_extensions; do - if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then - ac_cv_prog_ac_ct_STRIP="strip" - $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 - break 2 - fi -done - done -IFS=$as_save_IFS - -fi -fi -ac_ct_STRIP=$ac_cv_prog_ac_ct_STRIP -if test -n "$ac_ct_STRIP"; then - { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_ct_STRIP" >&5 -$as_echo "$ac_ct_STRIP" >&6; } -else - { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 -$as_echo "no" >&6; } -fi - - if test "x$ac_ct_STRIP" = x; then - STRIP=":" - else - case $cross_compiling:$ac_tool_warned in -yes:) -{ $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5 -$as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;} -ac_tool_warned=yes ;; -esac - STRIP=$ac_ct_STRIP - fi -else - STRIP="$ac_cv_prog_STRIP" -fi - -fi -INSTALL_STRIP_PROGRAM="\$(install_sh) -c -s" - -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for a thread-safe mkdir -p" >&5 -$as_echo_n "checking for a thread-safe mkdir -p... " >&6; } -if test -z "$MKDIR_P"; then - if ${ac_cv_path_mkdir+:} false; then : - $as_echo_n "(cached) " >&6 -else - as_save_IFS=$IFS; IFS=$PATH_SEPARATOR -for as_dir in $PATH$PATH_SEPARATOR/opt/sfw/bin -do - IFS=$as_save_IFS - test -z "$as_dir" && as_dir=. - for ac_prog in mkdir gmkdir; do - for ac_exec_ext in '' $ac_executable_extensions; do - as_fn_executable_p "$as_dir/$ac_prog$ac_exec_ext" || continue - case `"$as_dir/$ac_prog$ac_exec_ext" --version 2>&1` in #( - 'mkdir (GNU coreutils) '* | \ - 'mkdir (coreutils) '* | \ - 'mkdir (fileutils) '4.1*) - ac_cv_path_mkdir=$as_dir/$ac_prog$ac_exec_ext - break 3;; - esac - done - done - done -IFS=$as_save_IFS - -fi - - test -d ./--version && rmdir ./--version - if test "${ac_cv_path_mkdir+set}" = set; then - MKDIR_P="$ac_cv_path_mkdir -p" - else - # As a last resort, use the slow shell script. Don't cache a - # value for MKDIR_P within a source directory, because that will - # break other packages using the cache if that directory is - # removed, or if the value is a relative name. - MKDIR_P="$ac_install_sh -d" - fi -fi -{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $MKDIR_P" >&5 -$as_echo "$MKDIR_P" >&6; } - -for ac_prog in gawk mawk nawk awk -do - # Extract the first word of "$ac_prog", so it can be a program name with args. -set dummy $ac_prog; ac_word=$2 -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 -$as_echo_n "checking for $ac_word... " >&6; } -if ${ac_cv_prog_AWK+:} false; then : - $as_echo_n "(cached) " >&6 -else - if test -n "$AWK"; then - ac_cv_prog_AWK="$AWK" # Let the user override the test. -else -as_save_IFS=$IFS; IFS=$PATH_SEPARATOR -for as_dir in $PATH -do - IFS=$as_save_IFS - test -z "$as_dir" && as_dir=. - for ac_exec_ext in '' $ac_executable_extensions; do - if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then - ac_cv_prog_AWK="$ac_prog" - $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 - break 2 - fi -done - done -IFS=$as_save_IFS - -fi -fi -AWK=$ac_cv_prog_AWK -if test -n "$AWK"; then - { $as_echo "$as_me:${as_lineno-$LINENO}: result: $AWK" >&5 -$as_echo "$AWK" >&6; } -else - { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 -$as_echo "no" >&6; } -fi - - - test -n "$AWK" && break -done - -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether ${MAKE-make} sets \$(MAKE)" >&5 -$as_echo_n "checking whether ${MAKE-make} sets \$(MAKE)... " >&6; } -set x ${MAKE-make} -ac_make=`$as_echo "$2" | sed 's/+/p/g; s/[^a-zA-Z0-9_]/_/g'` -if eval \${ac_cv_prog_make_${ac_make}_set+:} false; then : - $as_echo_n "(cached) " >&6 -else - cat >conftest.make <<\_ACEOF -SHELL = /bin/sh -all: - @echo '@@@%%%=$(MAKE)=@@@%%%' -_ACEOF -# GNU make sometimes prints "make[1]: Entering ...", which would confuse us. -case `${MAKE-make} -f conftest.make 2>/dev/null` in - *@@@%%%=?*=@@@%%%*) - eval ac_cv_prog_make_${ac_make}_set=yes;; - *) - eval ac_cv_prog_make_${ac_make}_set=no;; -esac -rm -f conftest.make -fi -if eval test \$ac_cv_prog_make_${ac_make}_set = yes; then - { $as_echo "$as_me:${as_lineno-$LINENO}: result: yes" >&5 -$as_echo "yes" >&6; } - SET_MAKE= -else - { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 -$as_echo "no" >&6; } - SET_MAKE="MAKE=${MAKE-make}" -fi - -rm -rf .tst 2>/dev/null -mkdir .tst 2>/dev/null -if test -d .tst; then - am__leading_dot=. -else - am__leading_dot=_ -fi -rmdir .tst 2>/dev/null - -@%:@ Check whether --enable-silent-rules was given. -if test "${enable_silent_rules+set}" = set; then : - enableval=$enable_silent_rules; -fi - -case $enable_silent_rules in @%:@ ((( - yes) AM_DEFAULT_VERBOSITY=0;; - no) AM_DEFAULT_VERBOSITY=1;; - *) AM_DEFAULT_VERBOSITY=1;; -esac -am_make=${MAKE-make} -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether $am_make supports nested variables" >&5 -$as_echo_n "checking whether $am_make supports nested variables... " >&6; } -if ${am_cv_make_support_nested_variables+:} false; then : - $as_echo_n "(cached) " >&6 -else - if $as_echo 'TRUE=$(BAR$(V)) -BAR0=false -BAR1=true -V=1 -am__doit: - @$(TRUE) -.PHONY: am__doit' | $am_make -f - >/dev/null 2>&1; then - am_cv_make_support_nested_variables=yes -else - am_cv_make_support_nested_variables=no -fi -fi -{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $am_cv_make_support_nested_variables" >&5 -$as_echo "$am_cv_make_support_nested_variables" >&6; } -if test $am_cv_make_support_nested_variables = yes; then - AM_V='$(V)' - AM_DEFAULT_V='$(AM_DEFAULT_VERBOSITY)' -else - AM_V=$AM_DEFAULT_VERBOSITY - AM_DEFAULT_V=$AM_DEFAULT_VERBOSITY -fi -AM_BACKSLASH='\' - -if test "`cd $srcdir && pwd`" != "`pwd`"; then - # Use -I$(srcdir) only when $(srcdir) != ., so that make's output - # is not polluted with repeated "-I." - am__isrc=' -I$(srcdir)' - # test to see if srcdir already configured - if test -f $srcdir/config.status; then - as_fn_error $? "source directory already configured; run \"make distclean\" there first" "$LINENO" 5 - fi -fi - -# test whether we have cygpath -if test -z "$CYGPATH_W"; then - if (cygpath --version) >/dev/null 2>/dev/null; then - CYGPATH_W='cygpath -w' - else - CYGPATH_W=echo - fi -fi - - -# Define the identity of the package. - PACKAGE='autohello' - VERSION='1.1' - - -cat >>confdefs.h <<_ACEOF -@%:@define PACKAGE "$PACKAGE" -_ACEOF - - -cat >>confdefs.h <<_ACEOF -@%:@define VERSION "$VERSION" -_ACEOF - -# Some tools Automake needs. - -ACLOCAL=${ACLOCAL-"${am_missing_run}aclocal-${am__api_version}"} - - -AUTOCONF=${AUTOCONF-"${am_missing_run}autoconf"} - - -AUTOMAKE=${AUTOMAKE-"${am_missing_run}automake-${am__api_version}"} - - -AUTOHEADER=${AUTOHEADER-"${am_missing_run}autoheader"} - - -MAKEINFO=${MAKEINFO-"${am_missing_run}makeinfo"} - -# For better backward compatibility. To be removed once Automake 1.9.x -# dies out for good. For more background, see: -# -# -mkdir_p='$(MKDIR_P)' - -# We need awk for the "check" target. The system "awk" is bad on -# some platforms. -# Always define AMTAR for backward compatibility. Yes, it's still used -# in the wild :-( We should find a proper way to deprecate it ... -AMTAR='$${TAR-tar}' - - -# We'll loop over all known methods to create a tar archive until one works. -_am_tools='gnutar pax cpio none' - -am__tar='$${TAR-tar} chof - "$$tardir"' am__untar='$${TAR-tar} xf -' - - - - - - -# POSIX will say in a future version that running "rm -f" with no argument -# is OK; and we want to be able to make that assumption in our Makefile -# recipes. So use an aggressive probe to check that the usage we want is -# actually supported "in the wild" to an acceptable degree. -# See automake bug#10828. -# To make any issue more visible, cause the running configure to be aborted -# by default if the 'rm' program in use doesn't match our expectations; the -# user can still override this though. -if rm -f && rm -fr && rm -rf; then : OK; else - cat >&2 <<'END' -Oops! - -Your 'rm' program seems unable to run without file operands specified -on the command line, even when the '-f' option is present. This is contrary -to the behaviour of most rm programs out there, and not conforming with -the upcoming POSIX standard: - -Please tell bug-automake@gnu.org about your system, including the value -of your $PATH and any error possibly output before this message. This -can help us improve future automake versions. - -END - if test x"$ACCEPT_INFERIOR_RM_PROGRAM" = x"yes"; then - echo 'Configuration will proceed anyway, since you have set the' >&2 - echo 'ACCEPT_INFERIOR_RM_PROGRAM variable to "yes"' >&2 - echo >&2 - else - cat >&2 <<'END' -Aborting the configuration process, to ensure you take notice of the issue. - -You can download and install GNU coreutils to get an 'rm' implementation -that behaves properly: . - -If you want to complete the configuration process using your problematic -'rm' anyway, export the environment variable ACCEPT_INFERIOR_RM_PROGRAM -to "yes", and re-run configure. - -END - as_fn_error $? "Your 'rm' program is bad, sorry." "$LINENO" 5 - fi -fi - - -ac_config_headers="$ac_config_headers config.h" - - -# Checks for programs. -ac_ext=c -ac_cpp='$CPP $CPPFLAGS' -ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5' -ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5' -ac_compiler_gnu=$ac_cv_c_compiler_gnu -if test -n "$ac_tool_prefix"; then - # Extract the first word of "${ac_tool_prefix}gcc", so it can be a program name with args. -set dummy ${ac_tool_prefix}gcc; ac_word=$2 -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 -$as_echo_n "checking for $ac_word... " >&6; } -if ${ac_cv_prog_CC+:} false; then : - $as_echo_n "(cached) " >&6 -else - if test -n "$CC"; then - ac_cv_prog_CC="$CC" # Let the user override the test. -else -as_save_IFS=$IFS; IFS=$PATH_SEPARATOR -for as_dir in $PATH -do - IFS=$as_save_IFS - test -z "$as_dir" && as_dir=. - for ac_exec_ext in '' $ac_executable_extensions; do - if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then - ac_cv_prog_CC="${ac_tool_prefix}gcc" - $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 - break 2 - fi -done - done -IFS=$as_save_IFS - -fi -fi -CC=$ac_cv_prog_CC -if test -n "$CC"; then - { $as_echo "$as_me:${as_lineno-$LINENO}: result: $CC" >&5 -$as_echo "$CC" >&6; } -else - { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 -$as_echo "no" >&6; } -fi - - -fi -if test -z "$ac_cv_prog_CC"; then - ac_ct_CC=$CC - # Extract the first word of "gcc", so it can be a program name with args. -set dummy gcc; ac_word=$2 -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 -$as_echo_n "checking for $ac_word... " >&6; } -if ${ac_cv_prog_ac_ct_CC+:} false; then : - $as_echo_n "(cached) " >&6 -else - if test -n "$ac_ct_CC"; then - ac_cv_prog_ac_ct_CC="$ac_ct_CC" # Let the user override the test. -else -as_save_IFS=$IFS; IFS=$PATH_SEPARATOR -for as_dir in $PATH -do - IFS=$as_save_IFS - test -z "$as_dir" && as_dir=. - for ac_exec_ext in '' $ac_executable_extensions; do - if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then - ac_cv_prog_ac_ct_CC="gcc" - $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 - break 2 - fi -done - done -IFS=$as_save_IFS - -fi -fi -ac_ct_CC=$ac_cv_prog_ac_ct_CC -if test -n "$ac_ct_CC"; then - { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_ct_CC" >&5 -$as_echo "$ac_ct_CC" >&6; } -else - { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 -$as_echo "no" >&6; } -fi - - if test "x$ac_ct_CC" = x; then - CC="" - else - case $cross_compiling:$ac_tool_warned in -yes:) -{ $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5 -$as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;} -ac_tool_warned=yes ;; -esac - CC=$ac_ct_CC - fi -else - CC="$ac_cv_prog_CC" -fi - -if test -z "$CC"; then - if test -n "$ac_tool_prefix"; then - # Extract the first word of "${ac_tool_prefix}cc", so it can be a program name with args. -set dummy ${ac_tool_prefix}cc; ac_word=$2 -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 -$as_echo_n "checking for $ac_word... " >&6; } -if ${ac_cv_prog_CC+:} false; then : - $as_echo_n "(cached) " >&6 -else - if test -n "$CC"; then - ac_cv_prog_CC="$CC" # Let the user override the test. -else -as_save_IFS=$IFS; IFS=$PATH_SEPARATOR -for as_dir in $PATH -do - IFS=$as_save_IFS - test -z "$as_dir" && as_dir=. - for ac_exec_ext in '' $ac_executable_extensions; do - if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then - ac_cv_prog_CC="${ac_tool_prefix}cc" - $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 - break 2 - fi -done - done -IFS=$as_save_IFS - -fi -fi -CC=$ac_cv_prog_CC -if test -n "$CC"; then - { $as_echo "$as_me:${as_lineno-$LINENO}: result: $CC" >&5 -$as_echo "$CC" >&6; } -else - { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 -$as_echo "no" >&6; } -fi - - - fi -fi -if test -z "$CC"; then - # Extract the first word of "cc", so it can be a program name with args. -set dummy cc; ac_word=$2 -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 -$as_echo_n "checking for $ac_word... " >&6; } -if ${ac_cv_prog_CC+:} false; then : - $as_echo_n "(cached) " >&6 -else - if test -n "$CC"; then - ac_cv_prog_CC="$CC" # Let the user override the test. -else - ac_prog_rejected=no -as_save_IFS=$IFS; IFS=$PATH_SEPARATOR -for as_dir in $PATH -do - IFS=$as_save_IFS - test -z "$as_dir" && as_dir=. - for ac_exec_ext in '' $ac_executable_extensions; do - if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then - if test "$as_dir/$ac_word$ac_exec_ext" = "/usr/ucb/cc"; then - ac_prog_rejected=yes - continue - fi - ac_cv_prog_CC="cc" - $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 - break 2 - fi -done - done -IFS=$as_save_IFS - -if test $ac_prog_rejected = yes; then - # We found a bogon in the path, so make sure we never use it. - set dummy $ac_cv_prog_CC - shift - if test $@%:@ != 0; then - # We chose a different compiler from the bogus one. - # However, it has the same basename, so the bogon will be chosen - # first if we set CC to just the basename; use the full file name. - shift - ac_cv_prog_CC="$as_dir/$ac_word${1+' '}$@" - fi -fi -fi -fi -CC=$ac_cv_prog_CC -if test -n "$CC"; then - { $as_echo "$as_me:${as_lineno-$LINENO}: result: $CC" >&5 -$as_echo "$CC" >&6; } -else - { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 -$as_echo "no" >&6; } -fi - - -fi -if test -z "$CC"; then - if test -n "$ac_tool_prefix"; then - for ac_prog in cl.exe - do - # Extract the first word of "$ac_tool_prefix$ac_prog", so it can be a program name with args. -set dummy $ac_tool_prefix$ac_prog; ac_word=$2 -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 -$as_echo_n "checking for $ac_word... " >&6; } -if ${ac_cv_prog_CC+:} false; then : - $as_echo_n "(cached) " >&6 -else - if test -n "$CC"; then - ac_cv_prog_CC="$CC" # Let the user override the test. -else -as_save_IFS=$IFS; IFS=$PATH_SEPARATOR -for as_dir in $PATH -do - IFS=$as_save_IFS - test -z "$as_dir" && as_dir=. - for ac_exec_ext in '' $ac_executable_extensions; do - if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then - ac_cv_prog_CC="$ac_tool_prefix$ac_prog" - $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 - break 2 - fi -done - done -IFS=$as_save_IFS - -fi -fi -CC=$ac_cv_prog_CC -if test -n "$CC"; then - { $as_echo "$as_me:${as_lineno-$LINENO}: result: $CC" >&5 -$as_echo "$CC" >&6; } -else - { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 -$as_echo "no" >&6; } -fi - - - test -n "$CC" && break - done -fi -if test -z "$CC"; then - ac_ct_CC=$CC - for ac_prog in cl.exe -do - # Extract the first word of "$ac_prog", so it can be a program name with args. -set dummy $ac_prog; ac_word=$2 -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 -$as_echo_n "checking for $ac_word... " >&6; } -if ${ac_cv_prog_ac_ct_CC+:} false; then : - $as_echo_n "(cached) " >&6 -else - if test -n "$ac_ct_CC"; then - ac_cv_prog_ac_ct_CC="$ac_ct_CC" # Let the user override the test. -else -as_save_IFS=$IFS; IFS=$PATH_SEPARATOR -for as_dir in $PATH -do - IFS=$as_save_IFS - test -z "$as_dir" && as_dir=. - for ac_exec_ext in '' $ac_executable_extensions; do - if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then - ac_cv_prog_ac_ct_CC="$ac_prog" - $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 - break 2 - fi -done - done -IFS=$as_save_IFS - -fi -fi -ac_ct_CC=$ac_cv_prog_ac_ct_CC -if test -n "$ac_ct_CC"; then - { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_ct_CC" >&5 -$as_echo "$ac_ct_CC" >&6; } -else - { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 -$as_echo "no" >&6; } -fi - - - test -n "$ac_ct_CC" && break -done - - if test "x$ac_ct_CC" = x; then - CC="" - else - case $cross_compiling:$ac_tool_warned in -yes:) -{ $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5 -$as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;} -ac_tool_warned=yes ;; -esac - CC=$ac_ct_CC - fi -fi - -fi - - -test -z "$CC" && { { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5 -$as_echo "$as_me: error: in \`$ac_pwd':" >&2;} -as_fn_error $? "no acceptable C compiler found in \$PATH -See \`config.log' for more details" "$LINENO" 5; } - -# Provide some information about the compiler. -$as_echo "$as_me:${as_lineno-$LINENO}: checking for C compiler version" >&5 -set X $ac_compile -ac_compiler=$2 -for ac_option in --version -v -V -qversion; do - { { ac_try="$ac_compiler $ac_option >&5" -case "(($ac_try" in - *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; - *) ac_try_echo=$ac_try;; -esac -eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\"" -$as_echo "$ac_try_echo"; } >&5 - (eval "$ac_compiler $ac_option >&5") 2>conftest.err - ac_status=$? - if test -s conftest.err; then - sed '10a\ -... rest of stderr output deleted ... - 10q' conftest.err >conftest.er1 - cat conftest.er1 >&5 - fi - rm -f conftest.er1 conftest.err - $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 - test $ac_status = 0; } -done - -cat confdefs.h - <<_ACEOF >conftest.$ac_ext -/* end confdefs.h. */ - -int -main () -{ - - ; - return 0; -} -_ACEOF -ac_clean_files_save=$ac_clean_files -ac_clean_files="$ac_clean_files a.out a.out.dSYM a.exe b.out" -# Try to create an executable without -o first, disregard a.out. -# It will help us diagnose broken compilers, and finding out an intuition -# of exeext. -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether the C compiler works" >&5 -$as_echo_n "checking whether the C compiler works... " >&6; } -ac_link_default=`$as_echo "$ac_link" | sed 's/ -o *conftest[^ ]*//'` - -# The possible output files: -ac_files="a.out conftest.exe conftest a.exe a_out.exe b.out conftest.*" - -ac_rmfiles= -for ac_file in $ac_files -do - case $ac_file in - *.$ac_ext | *.xcoff | *.tds | *.d | *.pdb | *.xSYM | *.bb | *.bbg | *.map | *.inf | *.dSYM | *.o | *.obj ) ;; - * ) ac_rmfiles="$ac_rmfiles $ac_file";; - esac -done -rm -f $ac_rmfiles - -if { { ac_try="$ac_link_default" -case "(($ac_try" in - *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; - *) ac_try_echo=$ac_try;; -esac -eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\"" -$as_echo "$ac_try_echo"; } >&5 - (eval "$ac_link_default") 2>&5 - ac_status=$? - $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 - test $ac_status = 0; }; then : - # Autoconf-2.13 could set the ac_cv_exeext variable to `no'. -# So ignore a value of `no', otherwise this would lead to `EXEEXT = no' -# in a Makefile. We should not override ac_cv_exeext if it was cached, -# so that the user can short-circuit this test for compilers unknown to -# Autoconf. -for ac_file in $ac_files '' -do - test -f "$ac_file" || continue - case $ac_file in - *.$ac_ext | *.xcoff | *.tds | *.d | *.pdb | *.xSYM | *.bb | *.bbg | *.map | *.inf | *.dSYM | *.o | *.obj ) - ;; - [ab].out ) - # We found the default executable, but exeext='' is most - # certainly right. - break;; - *.* ) - if test "${ac_cv_exeext+set}" = set && test "$ac_cv_exeext" != no; - then :; else - ac_cv_exeext=`expr "$ac_file" : '[^.]*\(\..*\)'` - fi - # We set ac_cv_exeext here because the later test for it is not - # safe: cross compilers may not add the suffix if given an `-o' - # argument, so we may need to know it at that point already. - # Even if this section looks crufty: it has the advantage of - # actually working. - break;; - * ) - break;; - esac -done -test "$ac_cv_exeext" = no && ac_cv_exeext= - -else - ac_file='' -fi -if test -z "$ac_file"; then : - { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 -$as_echo "no" >&6; } -$as_echo "$as_me: failed program was:" >&5 -sed 's/^/| /' conftest.$ac_ext >&5 - -{ { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5 -$as_echo "$as_me: error: in \`$ac_pwd':" >&2;} -as_fn_error 77 "C compiler cannot create executables -See \`config.log' for more details" "$LINENO" 5; } -else - { $as_echo "$as_me:${as_lineno-$LINENO}: result: yes" >&5 -$as_echo "yes" >&6; } -fi -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for C compiler default output file name" >&5 -$as_echo_n "checking for C compiler default output file name... " >&6; } -{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_file" >&5 -$as_echo "$ac_file" >&6; } -ac_exeext=$ac_cv_exeext - -rm -f -r a.out a.out.dSYM a.exe conftest$ac_cv_exeext b.out -ac_clean_files=$ac_clean_files_save -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for suffix of executables" >&5 -$as_echo_n "checking for suffix of executables... " >&6; } -if { { ac_try="$ac_link" -case "(($ac_try" in - *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; - *) ac_try_echo=$ac_try;; -esac -eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\"" -$as_echo "$ac_try_echo"; } >&5 - (eval "$ac_link") 2>&5 - ac_status=$? - $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 - test $ac_status = 0; }; then : - # If both `conftest.exe' and `conftest' are `present' (well, observable) -# catch `conftest.exe'. For instance with Cygwin, `ls conftest' will -# work properly (i.e., refer to `conftest.exe'), while it won't with -# `rm'. -for ac_file in conftest.exe conftest conftest.*; do - test -f "$ac_file" || continue - case $ac_file in - *.$ac_ext | *.xcoff | *.tds | *.d | *.pdb | *.xSYM | *.bb | *.bbg | *.map | *.inf | *.dSYM | *.o | *.obj ) ;; - *.* ) ac_cv_exeext=`expr "$ac_file" : '[^.]*\(\..*\)'` - break;; - * ) break;; - esac -done -else - { { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5 -$as_echo "$as_me: error: in \`$ac_pwd':" >&2;} -as_fn_error $? "cannot compute suffix of executables: cannot compile and link -See \`config.log' for more details" "$LINENO" 5; } -fi -rm -f conftest conftest$ac_cv_exeext -{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_exeext" >&5 -$as_echo "$ac_cv_exeext" >&6; } - -rm -f conftest.$ac_ext -EXEEXT=$ac_cv_exeext -ac_exeext=$EXEEXT -cat confdefs.h - <<_ACEOF >conftest.$ac_ext -/* end confdefs.h. */ -@%:@include -int -main () -{ -FILE *f = fopen ("conftest.out", "w"); - return ferror (f) || fclose (f) != 0; - - ; - return 0; -} -_ACEOF -ac_clean_files="$ac_clean_files conftest.out" -# Check that the compiler produces executables we can run. If not, either -# the compiler is broken, or we cross compile. -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether we are cross compiling" >&5 -$as_echo_n "checking whether we are cross compiling... " >&6; } -if test "$cross_compiling" != yes; then - { { ac_try="$ac_link" -case "(($ac_try" in - *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; - *) ac_try_echo=$ac_try;; -esac -eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\"" -$as_echo "$ac_try_echo"; } >&5 - (eval "$ac_link") 2>&5 - ac_status=$? - $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 - test $ac_status = 0; } - if { ac_try='./conftest$ac_cv_exeext' - { { case "(($ac_try" in - *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; - *) ac_try_echo=$ac_try;; -esac -eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\"" -$as_echo "$ac_try_echo"; } >&5 - (eval "$ac_try") 2>&5 - ac_status=$? - $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 - test $ac_status = 0; }; }; then - cross_compiling=no - else - if test "$cross_compiling" = maybe; then - cross_compiling=yes - else - { { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5 -$as_echo "$as_me: error: in \`$ac_pwd':" >&2;} -as_fn_error $? "cannot run C compiled programs. -If you meant to cross compile, use \`--host'. -See \`config.log' for more details" "$LINENO" 5; } - fi - fi -fi -{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $cross_compiling" >&5 -$as_echo "$cross_compiling" >&6; } - -rm -f conftest.$ac_ext conftest$ac_cv_exeext conftest.out -ac_clean_files=$ac_clean_files_save -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for suffix of object files" >&5 -$as_echo_n "checking for suffix of object files... " >&6; } -if ${ac_cv_objext+:} false; then : - $as_echo_n "(cached) " >&6 -else - cat confdefs.h - <<_ACEOF >conftest.$ac_ext -/* end confdefs.h. */ - -int -main () -{ - - ; - return 0; -} -_ACEOF -rm -f conftest.o conftest.obj -if { { ac_try="$ac_compile" -case "(($ac_try" in - *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; - *) ac_try_echo=$ac_try;; -esac -eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\"" -$as_echo "$ac_try_echo"; } >&5 - (eval "$ac_compile") 2>&5 - ac_status=$? - $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 - test $ac_status = 0; }; then : - for ac_file in conftest.o conftest.obj conftest.*; do - test -f "$ac_file" || continue; - case $ac_file in - *.$ac_ext | *.xcoff | *.tds | *.d | *.pdb | *.xSYM | *.bb | *.bbg | *.map | *.inf | *.dSYM ) ;; - *) ac_cv_objext=`expr "$ac_file" : '.*\.\(.*\)'` - break;; - esac -done -else - $as_echo "$as_me: failed program was:" >&5 -sed 's/^/| /' conftest.$ac_ext >&5 - -{ { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5 -$as_echo "$as_me: error: in \`$ac_pwd':" >&2;} -as_fn_error $? "cannot compute suffix of object files: cannot compile -See \`config.log' for more details" "$LINENO" 5; } -fi -rm -f conftest.$ac_cv_objext conftest.$ac_ext -fi -{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_objext" >&5 -$as_echo "$ac_cv_objext" >&6; } -OBJEXT=$ac_cv_objext -ac_objext=$OBJEXT -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether we are using the GNU C compiler" >&5 -$as_echo_n "checking whether we are using the GNU C compiler... " >&6; } -if ${ac_cv_c_compiler_gnu+:} false; then : - $as_echo_n "(cached) " >&6 -else - cat confdefs.h - <<_ACEOF >conftest.$ac_ext -/* end confdefs.h. */ - -int -main () -{ -#ifndef __GNUC__ - choke me -#endif - - ; - return 0; -} -_ACEOF -if ac_fn_c_try_compile "$LINENO"; then : - ac_compiler_gnu=yes -else - ac_compiler_gnu=no -fi -rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext -ac_cv_c_compiler_gnu=$ac_compiler_gnu - -fi -{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_c_compiler_gnu" >&5 -$as_echo "$ac_cv_c_compiler_gnu" >&6; } -if test $ac_compiler_gnu = yes; then - GCC=yes -else - GCC= -fi -ac_test_CFLAGS=${CFLAGS+set} -ac_save_CFLAGS=$CFLAGS -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether $CC accepts -g" >&5 -$as_echo_n "checking whether $CC accepts -g... " >&6; } -if ${ac_cv_prog_cc_g+:} false; then : - $as_echo_n "(cached) " >&6 -else - ac_save_c_werror_flag=$ac_c_werror_flag - ac_c_werror_flag=yes - ac_cv_prog_cc_g=no - CFLAGS="-g" - cat confdefs.h - <<_ACEOF >conftest.$ac_ext -/* end confdefs.h. */ - -int -main () -{ - - ; - return 0; -} -_ACEOF -if ac_fn_c_try_compile "$LINENO"; then : - ac_cv_prog_cc_g=yes -else - CFLAGS="" - cat confdefs.h - <<_ACEOF >conftest.$ac_ext -/* end confdefs.h. */ - -int -main () -{ - - ; - return 0; -} -_ACEOF -if ac_fn_c_try_compile "$LINENO"; then : - -else - ac_c_werror_flag=$ac_save_c_werror_flag - CFLAGS="-g" - cat confdefs.h - <<_ACEOF >conftest.$ac_ext -/* end confdefs.h. */ - -int -main () -{ - - ; - return 0; -} -_ACEOF -if ac_fn_c_try_compile "$LINENO"; then : - ac_cv_prog_cc_g=yes -fi -rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext -fi -rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext -fi -rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext - ac_c_werror_flag=$ac_save_c_werror_flag -fi -{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_prog_cc_g" >&5 -$as_echo "$ac_cv_prog_cc_g" >&6; } -if test "$ac_test_CFLAGS" = set; then - CFLAGS=$ac_save_CFLAGS -elif test $ac_cv_prog_cc_g = yes; then - if test "$GCC" = yes; then - CFLAGS="-g -O2" - else - CFLAGS="-g" - fi -else - if test "$GCC" = yes; then - CFLAGS="-O2" - else - CFLAGS= - fi -fi -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $CC option to accept ISO C89" >&5 -$as_echo_n "checking for $CC option to accept ISO C89... " >&6; } -if ${ac_cv_prog_cc_c89+:} false; then : - $as_echo_n "(cached) " >&6 -else - ac_cv_prog_cc_c89=no -ac_save_CC=$CC -cat confdefs.h - <<_ACEOF >conftest.$ac_ext -/* end confdefs.h. */ -#include -#include -struct stat; -/* Most of the following tests are stolen from RCS 5.7's src/conf.sh. */ -struct buf { int x; }; -FILE * (*rcsopen) (struct buf *, struct stat *, int); -static char *e (p, i) - char **p; - int i; -{ - return p[i]; -} -static char *f (char * (*g) (char **, int), char **p, ...) -{ - char *s; - va_list v; - va_start (v,p); - s = g (p, va_arg (v,int)); - va_end (v); - return s; -} - -/* OSF 4.0 Compaq cc is some sort of almost-ANSI by default. It has - function prototypes and stuff, but not '\xHH' hex character constants. - These don't provoke an error unfortunately, instead are silently treated - as 'x'. The following induces an error, until -std is added to get - proper ANSI mode. Curiously '\x00'!='x' always comes out true, for an - array size at least. It's necessary to write '\x00'==0 to get something - that's true only with -std. */ -int osf4_cc_array ['\x00' == 0 ? 1 : -1]; - -/* IBM C 6 for AIX is almost-ANSI by default, but it replaces macro parameters - inside strings and character constants. */ -#define FOO(x) 'x' -int xlc6_cc_array[FOO(a) == 'x' ? 1 : -1]; - -int test (int i, double x); -struct s1 {int (*f) (int a);}; -struct s2 {int (*f) (double a);}; -int pairnames (int, char **, FILE *(*)(struct buf *, struct stat *, int), int, int); -int argc; -char **argv; -int -main () -{ -return f (e, argv, 0) != argv[0] || f (e, argv, 1) != argv[1]; - ; - return 0; -} -_ACEOF -for ac_arg in '' -qlanglvl=extc89 -qlanglvl=ansi -std \ - -Ae "-Aa -D_HPUX_SOURCE" "-Xc -D__EXTENSIONS__" -do - CC="$ac_save_CC $ac_arg" - if ac_fn_c_try_compile "$LINENO"; then : - ac_cv_prog_cc_c89=$ac_arg -fi -rm -f core conftest.err conftest.$ac_objext - test "x$ac_cv_prog_cc_c89" != "xno" && break -done -rm -f conftest.$ac_ext -CC=$ac_save_CC - -fi -# AC_CACHE_VAL -case "x$ac_cv_prog_cc_c89" in - x) - { $as_echo "$as_me:${as_lineno-$LINENO}: result: none needed" >&5 -$as_echo "none needed" >&6; } ;; - xno) - { $as_echo "$as_me:${as_lineno-$LINENO}: result: unsupported" >&5 -$as_echo "unsupported" >&6; } ;; - *) - CC="$CC $ac_cv_prog_cc_c89" - { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_prog_cc_c89" >&5 -$as_echo "$ac_cv_prog_cc_c89" >&6; } ;; -esac -if test "x$ac_cv_prog_cc_c89" != xno; then : - -fi - -ac_ext=c -ac_cpp='$CPP $CPPFLAGS' -ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5' -ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5' -ac_compiler_gnu=$ac_cv_c_compiler_gnu - -ac_ext=c -ac_cpp='$CPP $CPPFLAGS' -ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5' -ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5' -ac_compiler_gnu=$ac_cv_c_compiler_gnu -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether $CC understands -c and -o together" >&5 -$as_echo_n "checking whether $CC understands -c and -o together... " >&6; } -if ${am_cv_prog_cc_c_o+:} false; then : - $as_echo_n "(cached) " >&6 -else - cat confdefs.h - <<_ACEOF >conftest.$ac_ext -/* end confdefs.h. */ - -int -main () -{ - - ; - return 0; -} -_ACEOF - # Make sure it works both with $CC and with simple cc. - # Following AC_PROG_CC_C_O, we do the test twice because some - # compilers refuse to overwrite an existing .o file with -o, - # though they will create one. - am_cv_prog_cc_c_o=yes - for am_i in 1 2; do - if { echo "$as_me:$LINENO: $CC -c conftest.$ac_ext -o conftest2.$ac_objext" >&5 - ($CC -c conftest.$ac_ext -o conftest2.$ac_objext) >&5 2>&5 - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); } \ - && test -f conftest2.$ac_objext; then - : OK - else - am_cv_prog_cc_c_o=no - break - fi - done - rm -f core conftest* - unset am_i -fi -{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $am_cv_prog_cc_c_o" >&5 -$as_echo "$am_cv_prog_cc_c_o" >&6; } -if test "$am_cv_prog_cc_c_o" != yes; then - # Losing compiler, so override with the script. - # FIXME: It is wrong to rewrite CC. - # But if we don't then we get into trouble of one sort or another. - # A longer-term fix would be to have automake use am__CC in this case, - # and then we could set am__CC="\$(top_srcdir)/compile \$(CC)" - CC="$am_aux_dir/compile $CC" -fi -ac_ext=c -ac_cpp='$CPP $CPPFLAGS' -ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5' -ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5' -ac_compiler_gnu=$ac_cv_c_compiler_gnu - -DEPDIR="${am__leading_dot}deps" - -ac_config_commands="$ac_config_commands depfiles" - - -am_make=${MAKE-make} -cat > confinc << 'END' -am__doit: - @echo this is the am__doit target -.PHONY: am__doit -END -# If we don't find an include directive, just comment out the code. -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for style of include used by $am_make" >&5 -$as_echo_n "checking for style of include used by $am_make... " >&6; } -am__include="#" -am__quote= -_am_result=none -# First try GNU make style include. -echo "include confinc" > confmf -# Ignore all kinds of additional output from 'make'. -case `$am_make -s -f confmf 2> /dev/null` in #( -*the\ am__doit\ target*) - am__include=include - am__quote= - _am_result=GNU - ;; -esac -# Now try BSD make style include. -if test "$am__include" = "#"; then - echo '.include "confinc"' > confmf - case `$am_make -s -f confmf 2> /dev/null` in #( - *the\ am__doit\ target*) - am__include=.include - am__quote="\"" - _am_result=BSD - ;; - esac -fi - - -{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $_am_result" >&5 -$as_echo "$_am_result" >&6; } -rm -f confinc confmf - -@%:@ Check whether --enable-dependency-tracking was given. -if test "${enable_dependency_tracking+set}" = set; then : - enableval=$enable_dependency_tracking; -fi - -if test "x$enable_dependency_tracking" != xno; then - am_depcomp="$ac_aux_dir/depcomp" - AMDEPBACKSLASH='\' - am__nodep='_no' -fi - if test "x$enable_dependency_tracking" != xno; then - AMDEP_TRUE= - AMDEP_FALSE='#' -else - AMDEP_TRUE='#' - AMDEP_FALSE= -fi - - - -depcc="$CC" am_compiler_list= - -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking dependency style of $depcc" >&5 -$as_echo_n "checking dependency style of $depcc... " >&6; } -if ${am_cv_CC_dependencies_compiler_type+:} false; then : - $as_echo_n "(cached) " >&6 -else - if test -z "$AMDEP_TRUE" && test -f "$am_depcomp"; then - # We make a subdir and do the tests there. Otherwise we can end up - # making bogus files that we don't know about and never remove. For - # instance it was reported that on HP-UX the gcc test will end up - # making a dummy file named 'D' -- because '-MD' means "put the output - # in D". - rm -rf conftest.dir - mkdir conftest.dir - # Copy depcomp to subdir because otherwise we won't find it if we're - # using a relative directory. - cp "$am_depcomp" conftest.dir - cd conftest.dir - # We will build objects and dependencies in a subdirectory because - # it helps to detect inapplicable dependency modes. For instance - # both Tru64's cc and ICC support -MD to output dependencies as a - # side effect of compilation, but ICC will put the dependencies in - # the current directory while Tru64 will put them in the object - # directory. - mkdir sub - - am_cv_CC_dependencies_compiler_type=none - if test "$am_compiler_list" = ""; then - am_compiler_list=`sed -n 's/^#*\([a-zA-Z0-9]*\))$/\1/p' < ./depcomp` - fi - am__universal=false - case " $depcc " in #( - *\ -arch\ *\ -arch\ *) am__universal=true ;; - esac - - for depmode in $am_compiler_list; do - # Setup a source with many dependencies, because some compilers - # like to wrap large dependency lists on column 80 (with \), and - # we should not choose a depcomp mode which is confused by this. - # - # We need to recreate these files for each test, as the compiler may - # overwrite some of them when testing with obscure command lines. - # This happens at least with the AIX C compiler. - : > sub/conftest.c - for i in 1 2 3 4 5 6; do - echo '#include "conftst'$i'.h"' >> sub/conftest.c - # Using ": > sub/conftst$i.h" creates only sub/conftst1.h with - # Solaris 10 /bin/sh. - echo '/* dummy */' > sub/conftst$i.h - done - echo "${am__include} ${am__quote}sub/conftest.Po${am__quote}" > confmf - - # We check with '-c' and '-o' for the sake of the "dashmstdout" - # mode. It turns out that the SunPro C++ compiler does not properly - # handle '-M -o', and we need to detect this. Also, some Intel - # versions had trouble with output in subdirs. - am__obj=sub/conftest.${OBJEXT-o} - am__minus_obj="-o $am__obj" - case $depmode in - gcc) - # This depmode causes a compiler race in universal mode. - test "$am__universal" = false || continue - ;; - nosideeffect) - # After this tag, mechanisms are not by side-effect, so they'll - # only be used when explicitly requested. - if test "x$enable_dependency_tracking" = xyes; then - continue - else - break - fi - ;; - msvc7 | msvc7msys | msvisualcpp | msvcmsys) - # This compiler won't grok '-c -o', but also, the minuso test has - # not run yet. These depmodes are late enough in the game, and - # so weak that their functioning should not be impacted. - am__obj=conftest.${OBJEXT-o} - am__minus_obj= - ;; - none) break ;; - esac - if depmode=$depmode \ - source=sub/conftest.c object=$am__obj \ - depfile=sub/conftest.Po tmpdepfile=sub/conftest.TPo \ - $SHELL ./depcomp $depcc -c $am__minus_obj sub/conftest.c \ - >/dev/null 2>conftest.err && - grep sub/conftst1.h sub/conftest.Po > /dev/null 2>&1 && - grep sub/conftst6.h sub/conftest.Po > /dev/null 2>&1 && - grep $am__obj sub/conftest.Po > /dev/null 2>&1 && - ${MAKE-make} -s -f confmf > /dev/null 2>&1; then - # icc doesn't choke on unknown options, it will just issue warnings - # or remarks (even with -Werror). So we grep stderr for any message - # that says an option was ignored or not supported. - # When given -MP, icc 7.0 and 7.1 complain thusly: - # icc: Command line warning: ignoring option '-M'; no argument required - # The diagnosis changed in icc 8.0: - # icc: Command line remark: option '-MP' not supported - if (grep 'ignoring option' conftest.err || - grep 'not supported' conftest.err) >/dev/null 2>&1; then :; else - am_cv_CC_dependencies_compiler_type=$depmode - break - fi - fi - done - - cd .. - rm -rf conftest.dir -else - am_cv_CC_dependencies_compiler_type=none -fi - -fi -{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $am_cv_CC_dependencies_compiler_type" >&5 -$as_echo "$am_cv_CC_dependencies_compiler_type" >&6; } -CCDEPMODE=depmode=$am_cv_CC_dependencies_compiler_type - - if - test "x$enable_dependency_tracking" != xno \ - && test "$am_cv_CC_dependencies_compiler_type" = gcc3; then - am__fastdepCC_TRUE= - am__fastdepCC_FALSE='#' -else - am__fastdepCC_TRUE='#' - am__fastdepCC_FALSE= -fi - - - - - -# Checks for libraries. - -# Checks for header files. - -# Checks for typedefs, structures, and compiler characteristics. - -# Checks for library functions. - -ac_config_files="$ac_config_files Makefile" - -cat >confcache <<\_ACEOF -# This file is a shell script that caches the results of configure -# tests run on this system so they can be shared between configure -# scripts and configure runs, see configure's option --config-cache. -# It is not useful on other systems. If it contains results you don't -# want to keep, you may remove or edit it. -# -# config.status only pays attention to the cache file if you give it -# the --recheck option to rerun configure. -# -# `ac_cv_env_foo' variables (set or unset) will be overridden when -# loading this file, other *unset* `ac_cv_foo' will be assigned the -# following values. - -_ACEOF - -# The following way of writing the cache mishandles newlines in values, -# but we know of no workaround that is simple, portable, and efficient. -# So, we kill variables containing newlines. -# Ultrix sh set writes to stderr and can't be redirected directly, -# and sets the high bit in the cache file unless we assign to the vars. -( - for ac_var in `(set) 2>&1 | sed -n 's/^\([a-zA-Z_][a-zA-Z0-9_]*\)=.*/\1/p'`; do - eval ac_val=\$$ac_var - case $ac_val in #( - *${as_nl}*) - case $ac_var in #( - *_cv_*) { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: cache variable $ac_var contains a newline" >&5 -$as_echo "$as_me: WARNING: cache variable $ac_var contains a newline" >&2;} ;; - esac - case $ac_var in #( - _ | IFS | as_nl) ;; #( - BASH_ARGV | BASH_SOURCE) eval $ac_var= ;; #( - *) { eval $ac_var=; unset $ac_var;} ;; - esac ;; - esac - done - - (set) 2>&1 | - case $as_nl`(ac_space=' '; set) 2>&1` in #( - *${as_nl}ac_space=\ *) - # `set' does not quote correctly, so add quotes: double-quote - # substitution turns \\\\ into \\, and sed turns \\ into \. - sed -n \ - "s/'/'\\\\''/g; - s/^\\([_$as_cr_alnum]*_cv_[_$as_cr_alnum]*\\)=\\(.*\\)/\\1='\\2'/p" - ;; #( - *) - # `set' quotes correctly as required by POSIX, so do not add quotes. - sed -n "/^[_$as_cr_alnum]*_cv_[_$as_cr_alnum]*=/p" - ;; - esac | - sort -) | - sed ' - /^ac_cv_env_/b end - t clear - :clear - s/^\([^=]*\)=\(.*[{}].*\)$/test "${\1+set}" = set || &/ - t end - s/^\([^=]*\)=\(.*\)$/\1=${\1=\2}/ - :end' >>confcache -if diff "$cache_file" confcache >/dev/null 2>&1; then :; else - if test -w "$cache_file"; then - if test "x$cache_file" != "x/dev/null"; then - { $as_echo "$as_me:${as_lineno-$LINENO}: updating cache $cache_file" >&5 -$as_echo "$as_me: updating cache $cache_file" >&6;} - if test ! -f "$cache_file" || test -h "$cache_file"; then - cat confcache >"$cache_file" - else - case $cache_file in #( - */* | ?:*) - mv -f confcache "$cache_file"$$ && - mv -f "$cache_file"$$ "$cache_file" ;; #( - *) - mv -f confcache "$cache_file" ;; - esac - fi - fi - else - { $as_echo "$as_me:${as_lineno-$LINENO}: not updating unwritable cache $cache_file" >&5 -$as_echo "$as_me: not updating unwritable cache $cache_file" >&6;} - fi -fi -rm -f confcache - -test "x$prefix" = xNONE && prefix=$ac_default_prefix -# Let make expand exec_prefix. -test "x$exec_prefix" = xNONE && exec_prefix='${prefix}' - -DEFS=-DHAVE_CONFIG_H - -ac_libobjs= -ac_ltlibobjs= -U= -for ac_i in : $LIB@&t@OBJS; do test "x$ac_i" = x: && continue - # 1. Remove the extension, and $U if already installed. - ac_script='s/\$U\././;s/\.o$//;s/\.obj$//' - ac_i=`$as_echo "$ac_i" | sed "$ac_script"` - # 2. Prepend LIBOBJDIR. When used with automake>=1.10 LIBOBJDIR - # will be set to the directory where LIBOBJS objects are built. - as_fn_append ac_libobjs " \${LIBOBJDIR}$ac_i\$U.$ac_objext" - as_fn_append ac_ltlibobjs " \${LIBOBJDIR}$ac_i"'$U.lo' -done -LIB@&t@OBJS=$ac_libobjs - -LTLIBOBJS=$ac_ltlibobjs - - -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking that generated files are newer than configure" >&5 -$as_echo_n "checking that generated files are newer than configure... " >&6; } - if test -n "$am_sleep_pid"; then - # Hide warnings about reused PIDs. - wait $am_sleep_pid 2>/dev/null - fi - { $as_echo "$as_me:${as_lineno-$LINENO}: result: done" >&5 -$as_echo "done" >&6; } - if test -n "$EXEEXT"; then - am__EXEEXT_TRUE= - am__EXEEXT_FALSE='#' -else - am__EXEEXT_TRUE='#' - am__EXEEXT_FALSE= -fi - -if test -z "${AMDEP_TRUE}" && test -z "${AMDEP_FALSE}"; then - as_fn_error $? "conditional \"AMDEP\" was never defined. -Usually this means the macro was only invoked conditionally." "$LINENO" 5 -fi -if test -z "${am__fastdepCC_TRUE}" && test -z "${am__fastdepCC_FALSE}"; then - as_fn_error $? "conditional \"am__fastdepCC\" was never defined. -Usually this means the macro was only invoked conditionally." "$LINENO" 5 -fi - -: "${CONFIG_STATUS=./config.status}" -ac_write_fail=0 -ac_clean_files_save=$ac_clean_files -ac_clean_files="$ac_clean_files $CONFIG_STATUS" -{ $as_echo "$as_me:${as_lineno-$LINENO}: creating $CONFIG_STATUS" >&5 -$as_echo "$as_me: creating $CONFIG_STATUS" >&6;} -as_write_fail=0 -cat >$CONFIG_STATUS <<_ASEOF || as_write_fail=1 -#! $SHELL -# Generated by $as_me. -# Run this file to recreate the current configuration. -# Compiler output produced by configure, useful for debugging -# configure, is in config.log if it exists. - -debug=false -ac_cs_recheck=false -ac_cs_silent=false - -SHELL=\${CONFIG_SHELL-$SHELL} -export SHELL -_ASEOF -cat >>$CONFIG_STATUS <<\_ASEOF || as_write_fail=1 -## -------------------- ## -## M4sh Initialization. ## -## -------------------- ## - -# Be more Bourne compatible -DUALCASE=1; export DUALCASE # for MKS sh -if test -n "${ZSH_VERSION+set}" && (emulate sh) >/dev/null 2>&1; then : - emulate sh - NULLCMD=: - # Pre-4.2 versions of Zsh do word splitting on ${1+"$@"}, which - # is contrary to our usage. Disable this feature. - alias -g '${1+"$@"}'='"$@"' - setopt NO_GLOB_SUBST -else - case `(set -o) 2>/dev/null` in @%:@( - *posix*) : - set -o posix ;; @%:@( - *) : - ;; -esac -fi - - -as_nl=' -' -export as_nl -# Printing a long string crashes Solaris 7 /usr/bin/printf. -as_echo='\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\' -as_echo=$as_echo$as_echo$as_echo$as_echo$as_echo -as_echo=$as_echo$as_echo$as_echo$as_echo$as_echo$as_echo -# Prefer a ksh shell builtin over an external printf program on Solaris, -# but without wasting forks for bash or zsh. -if test -z "$BASH_VERSION$ZSH_VERSION" \ - && (test "X`print -r -- $as_echo`" = "X$as_echo") 2>/dev/null; then - as_echo='print -r --' - as_echo_n='print -rn --' -elif (test "X`printf %s $as_echo`" = "X$as_echo") 2>/dev/null; then - as_echo='printf %s\n' - as_echo_n='printf %s' -else - if test "X`(/usr/ucb/echo -n -n $as_echo) 2>/dev/null`" = "X-n $as_echo"; then - as_echo_body='eval /usr/ucb/echo -n "$1$as_nl"' - as_echo_n='/usr/ucb/echo -n' - else - as_echo_body='eval expr "X$1" : "X\\(.*\\)"' - as_echo_n_body='eval - arg=$1; - case $arg in @%:@( - *"$as_nl"*) - expr "X$arg" : "X\\(.*\\)$as_nl"; - arg=`expr "X$arg" : ".*$as_nl\\(.*\\)"`;; - esac; - expr "X$arg" : "X\\(.*\\)" | tr -d "$as_nl" - ' - export as_echo_n_body - as_echo_n='sh -c $as_echo_n_body as_echo' - fi - export as_echo_body - as_echo='sh -c $as_echo_body as_echo' -fi - -# The user is always right. -if test "${PATH_SEPARATOR+set}" != set; then - PATH_SEPARATOR=: - (PATH='/bin;/bin'; FPATH=$PATH; sh -c :) >/dev/null 2>&1 && { - (PATH='/bin:/bin'; FPATH=$PATH; sh -c :) >/dev/null 2>&1 || - PATH_SEPARATOR=';' - } -fi - - -# IFS -# We need space, tab and new line, in precisely that order. Quoting is -# there to prevent editors from complaining about space-tab. -# (If _AS_PATH_WALK were called with IFS unset, it would disable word -# splitting by setting IFS to empty value.) -IFS=" "" $as_nl" - -# Find who we are. Look in the path if we contain no directory separator. -as_myself= -case $0 in @%:@(( - *[\\/]* ) as_myself=$0 ;; - *) as_save_IFS=$IFS; IFS=$PATH_SEPARATOR -for as_dir in $PATH -do - IFS=$as_save_IFS - test -z "$as_dir" && as_dir=. - test -r "$as_dir/$0" && as_myself=$as_dir/$0 && break - done -IFS=$as_save_IFS - - ;; -esac -# We did not find ourselves, most probably we were run as `sh COMMAND' -# in which case we are not to be found in the path. -if test "x$as_myself" = x; then - as_myself=$0 -fi -if test ! -f "$as_myself"; then - $as_echo "$as_myself: error: cannot find myself; rerun with an absolute file name" >&2 - exit 1 -fi - -# Unset variables that we do not need and which cause bugs (e.g. in -# pre-3.0 UWIN ksh). But do not cause bugs in bash 2.01; the "|| exit 1" -# suppresses any "Segmentation fault" message there. '((' could -# trigger a bug in pdksh 5.2.14. -for as_var in BASH_ENV ENV MAIL MAILPATH -do eval test x\${$as_var+set} = xset \ - && ( (unset $as_var) || exit 1) >/dev/null 2>&1 && unset $as_var || : -done -PS1='$ ' -PS2='> ' -PS4='+ ' - -# NLS nuisances. -LC_ALL=C -export LC_ALL -LANGUAGE=C -export LANGUAGE - -# CDPATH. -(unset CDPATH) >/dev/null 2>&1 && unset CDPATH - - -@%:@ as_fn_error STATUS ERROR [LINENO LOG_FD] -@%:@ ---------------------------------------- -@%:@ Output "`basename @S|@0`: error: ERROR" to stderr. If LINENO and LOG_FD are -@%:@ provided, also output the error to LOG_FD, referencing LINENO. Then exit the -@%:@ script with STATUS, using 1 if that was 0. -as_fn_error () -{ - as_status=$1; test $as_status -eq 0 && as_status=1 - if test "$4"; then - as_lineno=${as_lineno-"$3"} as_lineno_stack=as_lineno_stack=$as_lineno_stack - $as_echo "$as_me:${as_lineno-$LINENO}: error: $2" >&$4 - fi - $as_echo "$as_me: error: $2" >&2 - as_fn_exit $as_status -} @%:@ as_fn_error - - -@%:@ as_fn_set_status STATUS -@%:@ ----------------------- -@%:@ Set @S|@? to STATUS, without forking. -as_fn_set_status () -{ - return $1 -} @%:@ as_fn_set_status - -@%:@ as_fn_exit STATUS -@%:@ ----------------- -@%:@ Exit the shell with STATUS, even in a "trap 0" or "set -e" context. -as_fn_exit () -{ - set +e - as_fn_set_status $1 - exit $1 -} @%:@ as_fn_exit - -@%:@ as_fn_unset VAR -@%:@ --------------- -@%:@ Portably unset VAR. -as_fn_unset () -{ - { eval $1=; unset $1;} -} -as_unset=as_fn_unset -@%:@ as_fn_append VAR VALUE -@%:@ ---------------------- -@%:@ Append the text in VALUE to the end of the definition contained in VAR. Take -@%:@ advantage of any shell optimizations that allow amortized linear growth over -@%:@ repeated appends, instead of the typical quadratic growth present in naive -@%:@ implementations. -if (eval "as_var=1; as_var+=2; test x\$as_var = x12") 2>/dev/null; then : - eval 'as_fn_append () - { - eval $1+=\$2 - }' -else - as_fn_append () - { - eval $1=\$$1\$2 - } -fi # as_fn_append - -@%:@ as_fn_arith ARG... -@%:@ ------------------ -@%:@ Perform arithmetic evaluation on the ARGs, and store the result in the -@%:@ global @S|@as_val. Take advantage of shells that can avoid forks. The arguments -@%:@ must be portable across @S|@(()) and expr. -if (eval "test \$(( 1 + 1 )) = 2") 2>/dev/null; then : - eval 'as_fn_arith () - { - as_val=$(( $* )) - }' -else - as_fn_arith () - { - as_val=`expr "$@" || test $? -eq 1` - } -fi # as_fn_arith - - -if expr a : '\(a\)' >/dev/null 2>&1 && - test "X`expr 00001 : '.*\(...\)'`" = X001; then - as_expr=expr -else - as_expr=false -fi - -if (basename -- /) >/dev/null 2>&1 && test "X`basename -- / 2>&1`" = "X/"; then - as_basename=basename -else - as_basename=false -fi - -if (as_dir=`dirname -- /` && test "X$as_dir" = X/) >/dev/null 2>&1; then - as_dirname=dirname -else - as_dirname=false -fi - -as_me=`$as_basename -- "$0" || -$as_expr X/"$0" : '.*/\([^/][^/]*\)/*$' \| \ - X"$0" : 'X\(//\)$' \| \ - X"$0" : 'X\(/\)' \| . 2>/dev/null || -$as_echo X/"$0" | - sed '/^.*\/\([^/][^/]*\)\/*$/{ - s//\1/ - q - } - /^X\/\(\/\/\)$/{ - s//\1/ - q - } - /^X\/\(\/\).*/{ - s//\1/ - q - } - s/.*/./; q'` - -# Avoid depending upon Character Ranges. -as_cr_letters='abcdefghijklmnopqrstuvwxyz' -as_cr_LETTERS='ABCDEFGHIJKLMNOPQRSTUVWXYZ' -as_cr_Letters=$as_cr_letters$as_cr_LETTERS -as_cr_digits='0123456789' -as_cr_alnum=$as_cr_Letters$as_cr_digits - -ECHO_C= ECHO_N= ECHO_T= -case `echo -n x` in @%:@((((( --n*) - case `echo 'xy\c'` in - *c*) ECHO_T=' ';; # ECHO_T is single tab character. - xy) ECHO_C='\c';; - *) echo `echo ksh88 bug on AIX 6.1` > /dev/null - ECHO_T=' ';; - esac;; -*) - ECHO_N='-n';; -esac - -rm -f conf$$ conf$$.exe conf$$.file -if test -d conf$$.dir; then - rm -f conf$$.dir/conf$$.file -else - rm -f conf$$.dir - mkdir conf$$.dir 2>/dev/null -fi -if (echo >conf$$.file) 2>/dev/null; then - if ln -s conf$$.file conf$$ 2>/dev/null; then - as_ln_s='ln -s' - # ... but there are two gotchas: - # 1) On MSYS, both `ln -s file dir' and `ln file dir' fail. - # 2) DJGPP < 2.04 has no symlinks; `ln -s' creates a wrapper executable. - # In both cases, we have to default to `cp -pR'. - ln -s conf$$.file conf$$.dir 2>/dev/null && test ! -f conf$$.exe || - as_ln_s='cp -pR' - elif ln conf$$.file conf$$ 2>/dev/null; then - as_ln_s=ln - else - as_ln_s='cp -pR' - fi -else - as_ln_s='cp -pR' -fi -rm -f conf$$ conf$$.exe conf$$.dir/conf$$.file conf$$.file -rmdir conf$$.dir 2>/dev/null - - -@%:@ as_fn_mkdir_p -@%:@ ------------- -@%:@ Create "@S|@as_dir" as a directory, including parents if necessary. -as_fn_mkdir_p () -{ - - case $as_dir in #( - -*) as_dir=./$as_dir;; - esac - test -d "$as_dir" || eval $as_mkdir_p || { - as_dirs= - while :; do - case $as_dir in #( - *\'*) as_qdir=`$as_echo "$as_dir" | sed "s/'/'\\\\\\\\''/g"`;; #'( - *) as_qdir=$as_dir;; - esac - as_dirs="'$as_qdir' $as_dirs" - as_dir=`$as_dirname -- "$as_dir" || -$as_expr X"$as_dir" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \ - X"$as_dir" : 'X\(//\)[^/]' \| \ - X"$as_dir" : 'X\(//\)$' \| \ - X"$as_dir" : 'X\(/\)' \| . 2>/dev/null || -$as_echo X"$as_dir" | - sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ - s//\1/ - q - } - /^X\(\/\/\)[^/].*/{ - s//\1/ - q - } - /^X\(\/\/\)$/{ - s//\1/ - q - } - /^X\(\/\).*/{ - s//\1/ - q - } - s/.*/./; q'` - test -d "$as_dir" && break - done - test -z "$as_dirs" || eval "mkdir $as_dirs" - } || test -d "$as_dir" || as_fn_error $? "cannot create directory $as_dir" - - -} @%:@ as_fn_mkdir_p -if mkdir -p . 2>/dev/null; then - as_mkdir_p='mkdir -p "$as_dir"' -else - test -d ./-p && rmdir ./-p - as_mkdir_p=false -fi - - -@%:@ as_fn_executable_p FILE -@%:@ ----------------------- -@%:@ Test if FILE is an executable regular file. -as_fn_executable_p () -{ - test -f "$1" && test -x "$1" -} @%:@ as_fn_executable_p -as_test_x='test -x' -as_executable_p=as_fn_executable_p - -# Sed expression to map a string onto a valid CPP name. -as_tr_cpp="eval sed 'y%*$as_cr_letters%P$as_cr_LETTERS%;s%[^_$as_cr_alnum]%_%g'" - -# Sed expression to map a string onto a valid variable name. -as_tr_sh="eval sed 'y%*+%pp%;s%[^_$as_cr_alnum]%_%g'" - - -exec 6>&1 -## ----------------------------------- ## -## Main body of $CONFIG_STATUS script. ## -## ----------------------------------- ## -_ASEOF -test $as_write_fail = 0 && chmod +x $CONFIG_STATUS || ac_write_fail=1 - -cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1 -# Save the log message, to keep $0 and so on meaningful, and to -# report actual input values of CONFIG_FILES etc. instead of their -# values after options handling. -ac_log=" -This file was extended by autohello $as_me 1.1, which was -generated by GNU Autoconf 2.69. Invocation command line was - - CONFIG_FILES = $CONFIG_FILES - CONFIG_HEADERS = $CONFIG_HEADERS - CONFIG_LINKS = $CONFIG_LINKS - CONFIG_COMMANDS = $CONFIG_COMMANDS - $ $0 $@ - -on `(hostname || uname -n) 2>/dev/null | sed 1q` -" - -_ACEOF - -case $ac_config_files in *" -"*) set x $ac_config_files; shift; ac_config_files=$*;; -esac - -case $ac_config_headers in *" -"*) set x $ac_config_headers; shift; ac_config_headers=$*;; -esac - - -cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1 -# Files that config.status was made for. -config_files="$ac_config_files" -config_headers="$ac_config_headers" -config_commands="$ac_config_commands" - -_ACEOF - -cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1 -ac_cs_usage="\ -\`$as_me' instantiates files and other configuration actions -from templates according to the current configuration. Unless the files -and actions are specified as TAGs, all are instantiated by default. - -Usage: $0 [OPTION]... [TAG]... - - -h, --help print this help, then exit - -V, --version print version number and configuration settings, then exit - --config print configuration, then exit - -q, --quiet, --silent - do not print progress messages - -d, --debug don't remove temporary files - --recheck update $as_me by reconfiguring in the same conditions - --file=FILE[:TEMPLATE] - instantiate the configuration file FILE - --header=FILE[:TEMPLATE] - instantiate the configuration header FILE - -Configuration files: -$config_files - -Configuration headers: -$config_headers - -Configuration commands: -$config_commands - -Report bugs to ." - -_ACEOF -cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1 -ac_cs_config="`$as_echo "$ac_configure_args" | sed 's/^ //; s/[\\""\`\$]/\\\\&/g'`" -ac_cs_version="\\ -autohello config.status 1.1 -configured by $0, generated by GNU Autoconf 2.69, - with options \\"\$ac_cs_config\\" - -Copyright (C) 2012 Free Software Foundation, Inc. -This config.status script is free software; the Free Software Foundation -gives unlimited permission to copy, distribute and modify it." - -ac_pwd='$ac_pwd' -srcdir='$srcdir' -INSTALL='$INSTALL' -MKDIR_P='$MKDIR_P' -AWK='$AWK' -test -n "\$AWK" || AWK=awk -_ACEOF - -cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1 -# The default lists apply if the user does not specify any file. -ac_need_defaults=: -while test $# != 0 -do - case $1 in - --*=?*) - ac_option=`expr "X$1" : 'X\([^=]*\)='` - ac_optarg=`expr "X$1" : 'X[^=]*=\(.*\)'` - ac_shift=: - ;; - --*=) - ac_option=`expr "X$1" : 'X\([^=]*\)='` - ac_optarg= - ac_shift=: - ;; - *) - ac_option=$1 - ac_optarg=$2 - ac_shift=shift - ;; - esac - - case $ac_option in - # Handling of the options. - -recheck | --recheck | --rechec | --reche | --rech | --rec | --re | --r) - ac_cs_recheck=: ;; - --version | --versio | --versi | --vers | --ver | --ve | --v | -V ) - $as_echo "$ac_cs_version"; exit ;; - --config | --confi | --conf | --con | --co | --c ) - $as_echo "$ac_cs_config"; exit ;; - --debug | --debu | --deb | --de | --d | -d ) - debug=: ;; - --file | --fil | --fi | --f ) - $ac_shift - case $ac_optarg in - *\'*) ac_optarg=`$as_echo "$ac_optarg" | sed "s/'/'\\\\\\\\''/g"` ;; - '') as_fn_error $? "missing file argument" ;; - esac - as_fn_append CONFIG_FILES " '$ac_optarg'" - ac_need_defaults=false;; - --header | --heade | --head | --hea ) - $ac_shift - case $ac_optarg in - *\'*) ac_optarg=`$as_echo "$ac_optarg" | sed "s/'/'\\\\\\\\''/g"` ;; - esac - as_fn_append CONFIG_HEADERS " '$ac_optarg'" - ac_need_defaults=false;; - --he | --h) - # Conflict between --help and --header - as_fn_error $? "ambiguous option: \`$1' -Try \`$0 --help' for more information.";; - --help | --hel | -h ) - $as_echo "$ac_cs_usage"; exit ;; - -q | -quiet | --quiet | --quie | --qui | --qu | --q \ - | -silent | --silent | --silen | --sile | --sil | --si | --s) - ac_cs_silent=: ;; - - # This is an error. - -*) as_fn_error $? "unrecognized option: \`$1' -Try \`$0 --help' for more information." ;; - - *) as_fn_append ac_config_targets " $1" - ac_need_defaults=false ;; - - esac - shift -done - -ac_configure_extra_args= - -if $ac_cs_silent; then - exec 6>/dev/null - ac_configure_extra_args="$ac_configure_extra_args --silent" -fi - -_ACEOF -cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1 -if \$ac_cs_recheck; then - set X $SHELL '$0' $ac_configure_args \$ac_configure_extra_args --no-create --no-recursion - shift - \$as_echo "running CONFIG_SHELL=$SHELL \$*" >&6 - CONFIG_SHELL='$SHELL' - export CONFIG_SHELL - exec "\$@" -fi - -_ACEOF -cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1 -exec 5>>config.log -{ - echo - sed 'h;s/./-/g;s/^.../@%:@@%:@ /;s/...$/ @%:@@%:@/;p;x;p;x' <<_ASBOX -@%:@@%:@ Running $as_me. @%:@@%:@ -_ASBOX - $as_echo "$ac_log" -} >&5 - -_ACEOF -cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1 -# -# INIT-COMMANDS -# -AMDEP_TRUE="$AMDEP_TRUE" ac_aux_dir="$ac_aux_dir" - -_ACEOF - -cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1 - -# Handling of arguments. -for ac_config_target in $ac_config_targets -do - case $ac_config_target in - "config.h") CONFIG_HEADERS="$CONFIG_HEADERS config.h" ;; - "depfiles") CONFIG_COMMANDS="$CONFIG_COMMANDS depfiles" ;; - "Makefile") CONFIG_FILES="$CONFIG_FILES Makefile" ;; - - *) as_fn_error $? "invalid argument: \`$ac_config_target'" "$LINENO" 5;; - esac -done - - -# If the user did not use the arguments to specify the items to instantiate, -# then the envvar interface is used. Set only those that are not. -# We use the long form for the default assignment because of an extremely -# bizarre bug on SunOS 4.1.3. -if $ac_need_defaults; then - test "${CONFIG_FILES+set}" = set || CONFIG_FILES=$config_files - test "${CONFIG_HEADERS+set}" = set || CONFIG_HEADERS=$config_headers - test "${CONFIG_COMMANDS+set}" = set || CONFIG_COMMANDS=$config_commands -fi - -# Have a temporary directory for convenience. Make it in the build tree -# simply because there is no reason against having it here, and in addition, -# creating and moving files from /tmp can sometimes cause problems. -# Hook for its removal unless debugging. -# Note that there is a small window in which the directory will not be cleaned: -# after its creation but before its name has been assigned to `$tmp'. -$debug || -{ - tmp= ac_tmp= - trap 'exit_status=$? - : "${ac_tmp:=$tmp}" - { test ! -d "$ac_tmp" || rm -fr "$ac_tmp"; } && exit $exit_status -' 0 - trap 'as_fn_exit 1' 1 2 13 15 -} -# Create a (secure) tmp directory for tmp files. - -{ - tmp=`(umask 077 && mktemp -d "./confXXXXXX") 2>/dev/null` && - test -d "$tmp" -} || -{ - tmp=./conf$$-$RANDOM - (umask 077 && mkdir "$tmp") -} || as_fn_error $? "cannot create a temporary directory in ." "$LINENO" 5 -ac_tmp=$tmp - -# Set up the scripts for CONFIG_FILES section. -# No need to generate them if there are no CONFIG_FILES. -# This happens for instance with `./config.status config.h'. -if test -n "$CONFIG_FILES"; then - - -ac_cr=`echo X | tr X '\015'` -# On cygwin, bash can eat \r inside `` if the user requested igncr. -# But we know of no other shell where ac_cr would be empty at this -# point, so we can use a bashism as a fallback. -if test "x$ac_cr" = x; then - eval ac_cr=\$\'\\r\' -fi -ac_cs_awk_cr=`$AWK 'BEGIN { print "a\rb" }' /dev/null` -if test "$ac_cs_awk_cr" = "a${ac_cr}b"; then - ac_cs_awk_cr='\\r' -else - ac_cs_awk_cr=$ac_cr -fi - -echo 'BEGIN {' >"$ac_tmp/subs1.awk" && -_ACEOF - - -{ - echo "cat >conf$$subs.awk <<_ACEOF" && - echo "$ac_subst_vars" | sed 's/.*/&!$&$ac_delim/' && - echo "_ACEOF" -} >conf$$subs.sh || - as_fn_error $? "could not make $CONFIG_STATUS" "$LINENO" 5 -ac_delim_num=`echo "$ac_subst_vars" | grep -c '^'` -ac_delim='%!_!# ' -for ac_last_try in false false false false false :; do - . ./conf$$subs.sh || - as_fn_error $? "could not make $CONFIG_STATUS" "$LINENO" 5 - - ac_delim_n=`sed -n "s/.*$ac_delim\$/X/p" conf$$subs.awk | grep -c X` - if test $ac_delim_n = $ac_delim_num; then - break - elif $ac_last_try; then - as_fn_error $? "could not make $CONFIG_STATUS" "$LINENO" 5 - else - ac_delim="$ac_delim!$ac_delim _$ac_delim!! " - fi -done -rm -f conf$$subs.sh - -cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1 -cat >>"\$ac_tmp/subs1.awk" <<\\_ACAWK && -_ACEOF -sed -n ' -h -s/^/S["/; s/!.*/"]=/ -p -g -s/^[^!]*!// -:repl -t repl -s/'"$ac_delim"'$// -t delim -:nl -h -s/\(.\{148\}\)..*/\1/ -t more1 -s/["\\]/\\&/g; s/^/"/; s/$/\\n"\\/ -p -n -b repl -:more1 -s/["\\]/\\&/g; s/^/"/; s/$/"\\/ -p -g -s/.\{148\}// -t nl -:delim -h -s/\(.\{148\}\)..*/\1/ -t more2 -s/["\\]/\\&/g; s/^/"/; s/$/"/ -p -b -:more2 -s/["\\]/\\&/g; s/^/"/; s/$/"\\/ -p -g -s/.\{148\}// -t delim -' >$CONFIG_STATUS || ac_write_fail=1 -rm -f conf$$subs.awk -cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1 -_ACAWK -cat >>"\$ac_tmp/subs1.awk" <<_ACAWK && - for (key in S) S_is_set[key] = 1 - FS = "" - -} -{ - line = $ 0 - nfields = split(line, field, "@") - substed = 0 - len = length(field[1]) - for (i = 2; i < nfields; i++) { - key = field[i] - keylen = length(key) - if (S_is_set[key]) { - value = S[key] - line = substr(line, 1, len) "" value "" substr(line, len + keylen + 3) - len += length(value) + length(field[++i]) - substed = 1 - } else - len += 1 + keylen - } - - print line -} - -_ACAWK -_ACEOF -cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1 -if sed "s/$ac_cr//" < /dev/null > /dev/null 2>&1; then - sed "s/$ac_cr\$//; s/$ac_cr/$ac_cs_awk_cr/g" -else - cat -fi < "$ac_tmp/subs1.awk" > "$ac_tmp/subs.awk" \ - || as_fn_error $? "could not setup config files machinery" "$LINENO" 5 -_ACEOF - -# VPATH may cause trouble with some makes, so we remove sole $(srcdir), -# ${srcdir} and @srcdir@ entries from VPATH if srcdir is ".", strip leading and -# trailing colons and then remove the whole line if VPATH becomes empty -# (actually we leave an empty line to preserve line numbers). -if test "x$srcdir" = x.; then - ac_vpsub='/^[ ]*VPATH[ ]*=[ ]*/{ -h -s/// -s/^/:/ -s/[ ]*$/:/ -s/:\$(srcdir):/:/g -s/:\${srcdir}:/:/g -s/:@srcdir@:/:/g -s/^:*// -s/:*$// -x -s/\(=[ ]*\).*/\1/ -G -s/\n// -s/^[^=]*=[ ]*$// -}' -fi - -cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1 -fi # test -n "$CONFIG_FILES" - -# Set up the scripts for CONFIG_HEADERS section. -# No need to generate them if there are no CONFIG_HEADERS. -# This happens for instance with `./config.status Makefile'. -if test -n "$CONFIG_HEADERS"; then -cat >"$ac_tmp/defines.awk" <<\_ACAWK || -BEGIN { -_ACEOF - -# Transform confdefs.h into an awk script `defines.awk', embedded as -# here-document in config.status, that substitutes the proper values into -# config.h.in to produce config.h. - -# Create a delimiter string that does not exist in confdefs.h, to ease -# handling of long lines. -ac_delim='%!_!# ' -for ac_last_try in false false :; do - ac_tt=`sed -n "/$ac_delim/p" confdefs.h` - if test -z "$ac_tt"; then - break - elif $ac_last_try; then - as_fn_error $? "could not make $CONFIG_HEADERS" "$LINENO" 5 - else - ac_delim="$ac_delim!$ac_delim _$ac_delim!! " - fi -done - -# For the awk script, D is an array of macro values keyed by name, -# likewise P contains macro parameters if any. Preserve backslash -# newline sequences. - -ac_word_re=[_$as_cr_Letters][_$as_cr_alnum]* -sed -n ' -s/.\{148\}/&'"$ac_delim"'/g -t rset -:rset -s/^[ ]*#[ ]*define[ ][ ]*/ / -t def -d -:def -s/\\$// -t bsnl -s/["\\]/\\&/g -s/^ \('"$ac_word_re"'\)\(([^()]*)\)[ ]*\(.*\)/P["\1"]="\2"\ -D["\1"]=" \3"/p -s/^ \('"$ac_word_re"'\)[ ]*\(.*\)/D["\1"]=" \2"/p -d -:bsnl -s/["\\]/\\&/g -s/^ \('"$ac_word_re"'\)\(([^()]*)\)[ ]*\(.*\)/P["\1"]="\2"\ -D["\1"]=" \3\\\\\\n"\\/p -t cont -s/^ \('"$ac_word_re"'\)[ ]*\(.*\)/D["\1"]=" \2\\\\\\n"\\/p -t cont -d -:cont -n -s/.\{148\}/&'"$ac_delim"'/g -t clear -:clear -s/\\$// -t bsnlc -s/["\\]/\\&/g; s/^/"/; s/$/"/p -d -:bsnlc -s/["\\]/\\&/g; s/^/"/; s/$/\\\\\\n"\\/p -b cont -' >$CONFIG_STATUS || ac_write_fail=1 - -cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1 - for (key in D) D_is_set[key] = 1 - FS = "" -} -/^[\t ]*#[\t ]*(define|undef)[\t ]+$ac_word_re([\t (]|\$)/ { - line = \$ 0 - split(line, arg, " ") - if (arg[1] == "#") { - defundef = arg[2] - mac1 = arg[3] - } else { - defundef = substr(arg[1], 2) - mac1 = arg[2] - } - split(mac1, mac2, "(") #) - macro = mac2[1] - prefix = substr(line, 1, index(line, defundef) - 1) - if (D_is_set[macro]) { - # Preserve the white space surrounding the "#". - print prefix "define", macro P[macro] D[macro] - next - } else { - # Replace #undef with comments. This is necessary, for example, - # in the case of _POSIX_SOURCE, which is predefined and required - # on some systems where configure will not decide to define it. - if (defundef == "undef") { - print "/*", prefix defundef, macro, "*/" - next - } - } -} -{ print } -_ACAWK -_ACEOF -cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1 - as_fn_error $? "could not setup config headers machinery" "$LINENO" 5 -fi # test -n "$CONFIG_HEADERS" - - -eval set X " :F $CONFIG_FILES :H $CONFIG_HEADERS :C $CONFIG_COMMANDS" -shift -for ac_tag -do - case $ac_tag in - :[FHLC]) ac_mode=$ac_tag; continue;; - esac - case $ac_mode$ac_tag in - :[FHL]*:*);; - :L* | :C*:*) as_fn_error $? "invalid tag \`$ac_tag'" "$LINENO" 5;; - :[FH]-) ac_tag=-:-;; - :[FH]*) ac_tag=$ac_tag:$ac_tag.in;; - esac - ac_save_IFS=$IFS - IFS=: - set x $ac_tag - IFS=$ac_save_IFS - shift - ac_file=$1 - shift - - case $ac_mode in - :L) ac_source=$1;; - :[FH]) - ac_file_inputs= - for ac_f - do - case $ac_f in - -) ac_f="$ac_tmp/stdin";; - *) # Look for the file first in the build tree, then in the source tree - # (if the path is not absolute). The absolute path cannot be DOS-style, - # because $ac_f cannot contain `:'. - test -f "$ac_f" || - case $ac_f in - [\\/$]*) false;; - *) test -f "$srcdir/$ac_f" && ac_f="$srcdir/$ac_f";; - esac || - as_fn_error 1 "cannot find input file: \`$ac_f'" "$LINENO" 5;; - esac - case $ac_f in *\'*) ac_f=`$as_echo "$ac_f" | sed "s/'/'\\\\\\\\''/g"`;; esac - as_fn_append ac_file_inputs " '$ac_f'" - done - - # Let's still pretend it is `configure' which instantiates (i.e., don't - # use $as_me), people would be surprised to read: - # /* config.h. Generated by config.status. */ - configure_input='Generated from '` - $as_echo "$*" | sed 's|^[^:]*/||;s|:[^:]*/|, |g' - `' by configure.' - if test x"$ac_file" != x-; then - configure_input="$ac_file. $configure_input" - { $as_echo "$as_me:${as_lineno-$LINENO}: creating $ac_file" >&5 -$as_echo "$as_me: creating $ac_file" >&6;} - fi - # Neutralize special characters interpreted by sed in replacement strings. - case $configure_input in #( - *\&* | *\|* | *\\* ) - ac_sed_conf_input=`$as_echo "$configure_input" | - sed 's/[\\\\&|]/\\\\&/g'`;; #( - *) ac_sed_conf_input=$configure_input;; - esac - - case $ac_tag in - *:-:* | *:-) cat >"$ac_tmp/stdin" \ - || as_fn_error $? "could not create $ac_file" "$LINENO" 5 ;; - esac - ;; - esac - - ac_dir=`$as_dirname -- "$ac_file" || -$as_expr X"$ac_file" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \ - X"$ac_file" : 'X\(//\)[^/]' \| \ - X"$ac_file" : 'X\(//\)$' \| \ - X"$ac_file" : 'X\(/\)' \| . 2>/dev/null || -$as_echo X"$ac_file" | - sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ - s//\1/ - q - } - /^X\(\/\/\)[^/].*/{ - s//\1/ - q - } - /^X\(\/\/\)$/{ - s//\1/ - q - } - /^X\(\/\).*/{ - s//\1/ - q - } - s/.*/./; q'` - as_dir="$ac_dir"; as_fn_mkdir_p - ac_builddir=. - -case "$ac_dir" in -.) ac_dir_suffix= ac_top_builddir_sub=. ac_top_build_prefix= ;; -*) - ac_dir_suffix=/`$as_echo "$ac_dir" | sed 's|^\.[\\/]||'` - # A ".." for each directory in $ac_dir_suffix. - ac_top_builddir_sub=`$as_echo "$ac_dir_suffix" | sed 's|/[^\\/]*|/..|g;s|/||'` - case $ac_top_builddir_sub in - "") ac_top_builddir_sub=. ac_top_build_prefix= ;; - *) ac_top_build_prefix=$ac_top_builddir_sub/ ;; - esac ;; -esac -ac_abs_top_builddir=$ac_pwd -ac_abs_builddir=$ac_pwd$ac_dir_suffix -# for backward compatibility: -ac_top_builddir=$ac_top_build_prefix - -case $srcdir in - .) # We are building in place. - ac_srcdir=. - ac_top_srcdir=$ac_top_builddir_sub - ac_abs_top_srcdir=$ac_pwd ;; - [\\/]* | ?:[\\/]* ) # Absolute name. - ac_srcdir=$srcdir$ac_dir_suffix; - ac_top_srcdir=$srcdir - ac_abs_top_srcdir=$srcdir ;; - *) # Relative name. - ac_srcdir=$ac_top_build_prefix$srcdir$ac_dir_suffix - ac_top_srcdir=$ac_top_build_prefix$srcdir - ac_abs_top_srcdir=$ac_pwd/$srcdir ;; -esac -ac_abs_srcdir=$ac_abs_top_srcdir$ac_dir_suffix - - - case $ac_mode in - :F) - # - # CONFIG_FILE - # - - case $INSTALL in - [\\/$]* | ?:[\\/]* ) ac_INSTALL=$INSTALL ;; - *) ac_INSTALL=$ac_top_build_prefix$INSTALL ;; - esac - ac_MKDIR_P=$MKDIR_P - case $MKDIR_P in - [\\/$]* | ?:[\\/]* ) ;; - */*) ac_MKDIR_P=$ac_top_build_prefix$MKDIR_P ;; - esac -_ACEOF - -cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1 -# If the template does not know about datarootdir, expand it. -# FIXME: This hack should be removed a few years after 2.60. -ac_datarootdir_hack=; ac_datarootdir_seen= -ac_sed_dataroot=' -/datarootdir/ { - p - q -} -/@datadir@/p -/@docdir@/p -/@infodir@/p -/@localedir@/p -/@mandir@/p' -case `eval "sed -n \"\$ac_sed_dataroot\" $ac_file_inputs"` in -*datarootdir*) ac_datarootdir_seen=yes;; -*@datadir@*|*@docdir@*|*@infodir@*|*@localedir@*|*@mandir@*) - { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: $ac_file_inputs seems to ignore the --datarootdir setting" >&5 -$as_echo "$as_me: WARNING: $ac_file_inputs seems to ignore the --datarootdir setting" >&2;} -_ACEOF -cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1 - ac_datarootdir_hack=' - s&@datadir@&$datadir&g - s&@docdir@&$docdir&g - s&@infodir@&$infodir&g - s&@localedir@&$localedir&g - s&@mandir@&$mandir&g - s&\\\${datarootdir}&$datarootdir&g' ;; -esac -_ACEOF - -# Neutralize VPATH when `$srcdir' = `.'. -# Shell code in configure.ac might set extrasub. -# FIXME: do we really want to maintain this feature? -cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1 -ac_sed_extra="$ac_vpsub -$extrasub -_ACEOF -cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1 -:t -/@[a-zA-Z_][a-zA-Z_0-9]*@/!b -s|@configure_input@|$ac_sed_conf_input|;t t -s&@top_builddir@&$ac_top_builddir_sub&;t t -s&@top_build_prefix@&$ac_top_build_prefix&;t t -s&@srcdir@&$ac_srcdir&;t t -s&@abs_srcdir@&$ac_abs_srcdir&;t t -s&@top_srcdir@&$ac_top_srcdir&;t t -s&@abs_top_srcdir@&$ac_abs_top_srcdir&;t t -s&@builddir@&$ac_builddir&;t t -s&@abs_builddir@&$ac_abs_builddir&;t t -s&@abs_top_builddir@&$ac_abs_top_builddir&;t t -s&@INSTALL@&$ac_INSTALL&;t t -s&@MKDIR_P@&$ac_MKDIR_P&;t t -$ac_datarootdir_hack -" -eval sed \"\$ac_sed_extra\" "$ac_file_inputs" | $AWK -f "$ac_tmp/subs.awk" \ - >$ac_tmp/out || as_fn_error $? "could not create $ac_file" "$LINENO" 5 - -test -z "$ac_datarootdir_hack$ac_datarootdir_seen" && - { ac_out=`sed -n '/\${datarootdir}/p' "$ac_tmp/out"`; test -n "$ac_out"; } && - { ac_out=`sed -n '/^[ ]*datarootdir[ ]*:*=/p' \ - "$ac_tmp/out"`; test -z "$ac_out"; } && - { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: $ac_file contains a reference to the variable \`datarootdir' -which seems to be undefined. Please make sure it is defined" >&5 -$as_echo "$as_me: WARNING: $ac_file contains a reference to the variable \`datarootdir' -which seems to be undefined. Please make sure it is defined" >&2;} - - rm -f "$ac_tmp/stdin" - case $ac_file in - -) cat "$ac_tmp/out" && rm -f "$ac_tmp/out";; - *) rm -f "$ac_file" && mv "$ac_tmp/out" "$ac_file";; - esac \ - || as_fn_error $? "could not create $ac_file" "$LINENO" 5 - ;; - :H) - # - # CONFIG_HEADER - # - if test x"$ac_file" != x-; then - { - $as_echo "/* $configure_input */" \ - && eval '$AWK -f "$ac_tmp/defines.awk"' "$ac_file_inputs" - } >"$ac_tmp/config.h" \ - || as_fn_error $? "could not create $ac_file" "$LINENO" 5 - if diff "$ac_file" "$ac_tmp/config.h" >/dev/null 2>&1; then - { $as_echo "$as_me:${as_lineno-$LINENO}: $ac_file is unchanged" >&5 -$as_echo "$as_me: $ac_file is unchanged" >&6;} - else - rm -f "$ac_file" - mv "$ac_tmp/config.h" "$ac_file" \ - || as_fn_error $? "could not create $ac_file" "$LINENO" 5 - fi - else - $as_echo "/* $configure_input */" \ - && eval '$AWK -f "$ac_tmp/defines.awk"' "$ac_file_inputs" \ - || as_fn_error $? "could not create -" "$LINENO" 5 - fi -# Compute "$ac_file"'s index in $config_headers. -_am_arg="$ac_file" -_am_stamp_count=1 -for _am_header in $config_headers :; do - case $_am_header in - $_am_arg | $_am_arg:* ) - break ;; - * ) - _am_stamp_count=`expr $_am_stamp_count + 1` ;; - esac -done -echo "timestamp for $_am_arg" >`$as_dirname -- "$_am_arg" || -$as_expr X"$_am_arg" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \ - X"$_am_arg" : 'X\(//\)[^/]' \| \ - X"$_am_arg" : 'X\(//\)$' \| \ - X"$_am_arg" : 'X\(/\)' \| . 2>/dev/null || -$as_echo X"$_am_arg" | - sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ - s//\1/ - q - } - /^X\(\/\/\)[^/].*/{ - s//\1/ - q - } - /^X\(\/\/\)$/{ - s//\1/ - q - } - /^X\(\/\).*/{ - s//\1/ - q - } - s/.*/./; q'`/stamp-h$_am_stamp_count - ;; - - :C) { $as_echo "$as_me:${as_lineno-$LINENO}: executing $ac_file commands" >&5 -$as_echo "$as_me: executing $ac_file commands" >&6;} - ;; - esac - - - case $ac_file$ac_mode in - "depfiles":C) test x"$AMDEP_TRUE" != x"" || { - # Older Autoconf quotes --file arguments for eval, but not when files - # are listed without --file. Let's play safe and only enable the eval - # if we detect the quoting. - case $CONFIG_FILES in - *\'*) eval set x "$CONFIG_FILES" ;; - *) set x $CONFIG_FILES ;; - esac - shift - for mf - do - # Strip MF so we end up with the name of the file. - mf=`echo "$mf" | sed -e 's/:.*$//'` - # Check whether this is an Automake generated Makefile or not. - # We used to match only the files named 'Makefile.in', but - # some people rename them; so instead we look at the file content. - # Grep'ing the first line is not enough: some people post-process - # each Makefile.in and add a new line on top of each file to say so. - # Grep'ing the whole file is not good either: AIX grep has a line - # limit of 2048, but all sed's we know have understand at least 4000. - if sed -n 's,^#.*generated by automake.*,X,p' "$mf" | grep X >/dev/null 2>&1; then - dirpart=`$as_dirname -- "$mf" || -$as_expr X"$mf" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \ - X"$mf" : 'X\(//\)[^/]' \| \ - X"$mf" : 'X\(//\)$' \| \ - X"$mf" : 'X\(/\)' \| . 2>/dev/null || -$as_echo X"$mf" | - sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ - s//\1/ - q - } - /^X\(\/\/\)[^/].*/{ - s//\1/ - q - } - /^X\(\/\/\)$/{ - s//\1/ - q - } - /^X\(\/\).*/{ - s//\1/ - q - } - s/.*/./; q'` - else - continue - fi - # Extract the definition of DEPDIR, am__include, and am__quote - # from the Makefile without running 'make'. - DEPDIR=`sed -n 's/^DEPDIR = //p' < "$mf"` - test -z "$DEPDIR" && continue - am__include=`sed -n 's/^am__include = //p' < "$mf"` - test -z "$am__include" && continue - am__quote=`sed -n 's/^am__quote = //p' < "$mf"` - # Find all dependency output files, they are included files with - # $(DEPDIR) in their names. We invoke sed twice because it is the - # simplest approach to changing $(DEPDIR) to its actual value in the - # expansion. - for file in `sed -n " - s/^$am__include $am__quote\(.*(DEPDIR).*\)$am__quote"'$/\1/p' <"$mf" | \ - sed -e 's/\$(DEPDIR)/'"$DEPDIR"'/g'`; do - # Make sure the directory exists. - test -f "$dirpart/$file" && continue - fdir=`$as_dirname -- "$file" || -$as_expr X"$file" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \ - X"$file" : 'X\(//\)[^/]' \| \ - X"$file" : 'X\(//\)$' \| \ - X"$file" : 'X\(/\)' \| . 2>/dev/null || -$as_echo X"$file" | - sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ - s//\1/ - q - } - /^X\(\/\/\)[^/].*/{ - s//\1/ - q - } - /^X\(\/\/\)$/{ - s//\1/ - q - } - /^X\(\/\).*/{ - s//\1/ - q - } - s/.*/./; q'` - as_dir=$dirpart/$fdir; as_fn_mkdir_p - # echo "creating $dirpart/$file" - echo '# dummy' > "$dirpart/$file" - done - done -} - ;; - - esac -done # for ac_tag - - -as_fn_exit 0 -_ACEOF -ac_clean_files=$ac_clean_files_save - -test $ac_write_fail = 0 || - as_fn_error $? "write failure creating $CONFIG_STATUS" "$LINENO" 5 - - -# configure is writing to config.log, and then calls config.status. -# config.status does its own redirection, appending to config.log. -# Unfortunately, on DOS this fails, as config.log is still kept open -# by configure, so config.status won't be able to write to it; its -# output is simply discarded. So we exec the FD to /dev/null, -# effectively closing config.log, so it can be properly (re)opened and -# appended to by config.status. When coming back to configure, we -# need to make the FD available again. -if test "$no_create" != yes; then - ac_cs_success=: - ac_config_status_args= - test "$silent" = yes && - ac_config_status_args="$ac_config_status_args --quiet" - exec 5>/dev/null - $SHELL $CONFIG_STATUS $ac_config_status_args || ac_cs_success=false - exec 5>>config.log - # Use ||, not &&, to avoid exiting from the if with $? = 1, which - # would make configure fail if this is the last instruction. - $ac_cs_success || as_fn_exit 1 -fi -if test -n "$ac_unrecognized_opts" && test "$enable_option_checking" != no; then - { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: unrecognized options: $ac_unrecognized_opts" >&5 -$as_echo "$as_me: WARNING: unrecognized options: $ac_unrecognized_opts" >&2;} -fi - diff --git a/distribution/yocto-advanced/poky/meta-mini/recipes-hello/autohello/files/autohello/autom4te.cache/requests b/distribution/yocto-advanced/poky/meta-mini/recipes-hello/autohello/files/autohello/autom4te.cache/requests deleted file mode 100644 index a724ae0..0000000 --- a/distribution/yocto-advanced/poky/meta-mini/recipes-hello/autohello/files/autohello/autom4te.cache/requests +++ /dev/null @@ -1,154 +0,0 @@ -# This file was generated by Autom4te Sun Jun 29 17:42:32 UTC 2014. -# It contains the lists of macros which have been traced. -# It can be safely removed. - -@request = ( - bless( [ - '0', - 1, - [ - '/usr/share/autoconf' - ], - [ - '/usr/share/autoconf/autoconf/autoconf.m4f', - '-', - '/usr/share/aclocal-1.14/internal/ac-config-macro-dirs.m4', - '/usr/share/aclocal-1.14/amversion.m4', - '/usr/share/aclocal-1.14/auxdir.m4', - '/usr/share/aclocal-1.14/cond.m4', - '/usr/share/aclocal-1.14/depend.m4', - '/usr/share/aclocal-1.14/depout.m4', - '/usr/share/aclocal-1.14/init.m4', - '/usr/share/aclocal-1.14/install-sh.m4', - '/usr/share/aclocal-1.14/lead-dot.m4', - '/usr/share/aclocal-1.14/make.m4', - '/usr/share/aclocal-1.14/missing.m4', - '/usr/share/aclocal-1.14/options.m4', - '/usr/share/aclocal-1.14/prog-cc-c-o.m4', - '/usr/share/aclocal-1.14/runlog.m4', - '/usr/share/aclocal-1.14/sanity.m4', - '/usr/share/aclocal-1.14/silent.m4', - '/usr/share/aclocal-1.14/strip.m4', - '/usr/share/aclocal-1.14/substnot.m4', - '/usr/share/aclocal-1.14/tar.m4', - 'configure.ac' - ], - { - 'AC_DEFUN' => 1, - 'AC_CONFIG_MACRO_DIR_TRACE' => 1, - 'AM_DEP_TRACK' => 1, - 'AM_RUN_LOG' => 1, - '_AM_SUBST_NOTMAKE' => 1, - 'AM_SILENT_RULES' => 1, - 'AM_INIT_AUTOMAKE' => 1, - '_AM_IF_OPTION' => 1, - 'AM_AUTOMAKE_VERSION' => 1, - 'AM_PROG_INSTALL_SH' => 1, - 'AM_MAKE_INCLUDE' => 1, - 'AM_CONDITIONAL' => 1, - 'AM_SUBST_NOTMAKE' => 1, - 'AU_DEFUN' => 1, - 'AC_DEFUN_ONCE' => 1, - 'AC_CONFIG_MACRO_DIR' => 1, - 'include' => 1, - '_AM_AUTOCONF_VERSION' => 1, - 'AM_PROG_CC_C_O' => 1, - 'm4_pattern_forbid' => 1, - 'AM_SET_DEPDIR' => 1, - '_AM_OUTPUT_DEPENDENCY_COMMANDS' => 1, - '_m4_warn' => 1, - 'm4_pattern_allow' => 1, - 'AM_MISSING_PROG' => 1, - 'AM_SET_LEADING_DOT' => 1, - 'AM_SANITY_CHECK' => 1, - 'AM_PROG_INSTALL_STRIP' => 1, - 'AM_OUTPUT_DEPENDENCY_COMMANDS' => 1, - '_AM_CONFIG_MACRO_DIRS' => 1, - 'm4_include' => 1, - '_AC_AM_CONFIG_HEADER_HOOK' => 1, - '_AM_PROG_TAR' => 1, - '_AM_SET_OPTIONS' => 1, - '_AM_DEPENDENCIES' => 1, - '_AM_MANGLE_OPTION' => 1, - 'AM_SET_CURRENT_AUTOMAKE_VERSION' => 1, - '_AM_PROG_CC_C_O' => 1, - 'AM_AUX_DIR_EXPAND' => 1, - 'AM_MISSING_HAS_RUN' => 1, - '_AM_SET_OPTION' => 1 - } - ], 'Autom4te::Request' ), - bless( [ - '1', - 1, - [ - '/usr/share/autoconf' - ], - [ - '/usr/share/autoconf/autoconf/autoconf.m4f', - 'aclocal.m4', - 'configure.ac' - ], - { - 'AM_SILENT_RULES' => 1, - 'sinclude' => 1, - 'AM_INIT_AUTOMAKE' => 1, - 'AM_EXTRA_RECURSIVE_TARGETS' => 1, - 'AM_AUTOMAKE_VERSION' => 1, - 'AM_CONDITIONAL' => 1, - 'AC_CONFIG_SUBDIRS' => 1, - 'AC_CANONICAL_HOST' => 1, - 'AC_CONFIG_LIBOBJ_DIR' => 1, - 'AM_PATH_GUILE' => 1, - 'LT_SUPPORTED_TAG' => 1, - 'AC_FC_FREEFORM' => 1, - '_LT_AC_TAGCONFIG' => 1, - '_AM_SUBST_NOTMAKE' => 1, - 'include' => 1, - 'm4_sinclude' => 1, - 'AM_PROG_CXX_C_O' => 1, - 'AM_XGETTEXT_OPTION' => 1, - 'AM_PROG_CC_C_O' => 1, - 'AC_CANONICAL_BUILD' => 1, - 'AM_PROG_FC_C_O' => 1, - 'm4_pattern_forbid' => 1, - 'AC_DEFINE_TRACE_LITERAL' => 1, - '_AM_COND_ELSE' => 1, - 'AH_OUTPUT' => 1, - 'AC_LIBSOURCE' => 1, - 'AM_MAKEFILE_INCLUDE' => 1, - 'AC_CONFIG_HEADERS' => 1, - 'AM_NLS' => 1, - 'AC_CANONICAL_SYSTEM' => 1, - 'AM_MAINTAINER_MODE' => 1, - 'AM_PROG_MOC' => 1, - 'AM_POT_TOOLS' => 1, - 'm4_pattern_allow' => 1, - 'AC_FC_PP_SRCEXT' => 1, - 'LT_INIT' => 1, - 'AC_CONFIG_LINKS' => 1, - 'AC_FC_PP_DEFINE' => 1, - 'AC_REQUIRE_AUX_FILE' => 1, - '_AM_COND_IF' => 1, - 'AC_CANONICAL_TARGET' => 1, - '_m4_warn' => 1, - 'AC_SUBST_TRACE' => 1, - 'AM_PROG_MKDIR_P' => 1, - 'AM_PROG_AR' => 1, - 'AM_ENABLE_MULTILIB' => 1, - '_AM_COND_ENDIF' => 1, - 'AC_CONFIG_AUX_DIR' => 1, - 'AM_GNU_GETTEXT' => 1, - '_AM_MAKEFILE_INCLUDE' => 1, - 'AC_FC_SRCEXT' => 1, - 'AM_PROG_F77_C_O' => 1, - 'AC_SUBST' => 1, - 'AC_INIT' => 1, - 'AC_CONFIG_FILES' => 1, - 'm4_include' => 1, - 'LT_CONFIG_LTDL_DIR' => 1, - 'AM_GNU_GETTEXT_INTL_SUBDIR' => 1, - 'AC_PROG_LIBTOOL' => 1 - } - ], 'Autom4te::Request' ) - ); - diff --git a/distribution/yocto-advanced/poky/meta-mini/recipes-hello/autohello/files/autohello/autom4te.cache/traces.0 b/distribution/yocto-advanced/poky/meta-mini/recipes-hello/autohello/files/autohello/autom4te.cache/traces.0 deleted file mode 100644 index 8621358..0000000 --- a/distribution/yocto-advanced/poky/meta-mini/recipes-hello/autohello/files/autohello/autom4te.cache/traces.0 +++ /dev/null @@ -1,932 +0,0 @@ -m4trace:/usr/share/aclocal-1.14/amversion.m4:14: -1- AC_DEFUN([AM_AUTOMAKE_VERSION], [am__api_version='1.14' -dnl Some users find AM_AUTOMAKE_VERSION and mistake it for a way to -dnl require some minimum version. Point them to the right macro. -m4_if([$1], [1.14.1], [], - [AC_FATAL([Do not call $0, use AM_INIT_AUTOMAKE([$1]).])])dnl -]) -m4trace:/usr/share/aclocal-1.14/amversion.m4:33: -1- AC_DEFUN([AM_SET_CURRENT_AUTOMAKE_VERSION], [AM_AUTOMAKE_VERSION([1.14.1])dnl -m4_ifndef([AC_AUTOCONF_VERSION], - [m4_copy([m4_PACKAGE_VERSION], [AC_AUTOCONF_VERSION])])dnl -_AM_AUTOCONF_VERSION(m4_defn([AC_AUTOCONF_VERSION]))]) -m4trace:/usr/share/aclocal-1.14/auxdir.m4:47: -1- AC_DEFUN([AM_AUX_DIR_EXPAND], [dnl Rely on autoconf to set up CDPATH properly. -AC_PREREQ([2.50])dnl -# expand $ac_aux_dir to an absolute path -am_aux_dir=`cd $ac_aux_dir && pwd` -]) -m4trace:/usr/share/aclocal-1.14/cond.m4:12: -1- AC_DEFUN([AM_CONDITIONAL], [AC_PREREQ([2.52])dnl - m4_if([$1], [TRUE], [AC_FATAL([$0: invalid condition: $1])], - [$1], [FALSE], [AC_FATAL([$0: invalid condition: $1])])dnl -AC_SUBST([$1_TRUE])dnl -AC_SUBST([$1_FALSE])dnl -_AM_SUBST_NOTMAKE([$1_TRUE])dnl -_AM_SUBST_NOTMAKE([$1_FALSE])dnl -m4_define([_AM_COND_VALUE_$1], [$2])dnl -if $2; then - $1_TRUE= - $1_FALSE='#' -else - $1_TRUE='#' - $1_FALSE= -fi -AC_CONFIG_COMMANDS_PRE( -[if test -z "${$1_TRUE}" && test -z "${$1_FALSE}"; then - AC_MSG_ERROR([[conditional "$1" was never defined. -Usually this means the macro was only invoked conditionally.]]) -fi])]) -m4trace:/usr/share/aclocal-1.14/depend.m4:26: -1- AC_DEFUN([_AM_DEPENDENCIES], [AC_REQUIRE([AM_SET_DEPDIR])dnl -AC_REQUIRE([AM_OUTPUT_DEPENDENCY_COMMANDS])dnl -AC_REQUIRE([AM_MAKE_INCLUDE])dnl -AC_REQUIRE([AM_DEP_TRACK])dnl - -m4_if([$1], [CC], [depcc="$CC" am_compiler_list=], - [$1], [CXX], [depcc="$CXX" am_compiler_list=], - [$1], [OBJC], [depcc="$OBJC" am_compiler_list='gcc3 gcc'], - [$1], [OBJCXX], [depcc="$OBJCXX" am_compiler_list='gcc3 gcc'], - [$1], [UPC], [depcc="$UPC" am_compiler_list=], - [$1], [GCJ], [depcc="$GCJ" am_compiler_list='gcc3 gcc'], - [depcc="$$1" am_compiler_list=]) - -AC_CACHE_CHECK([dependency style of $depcc], - [am_cv_$1_dependencies_compiler_type], -[if test -z "$AMDEP_TRUE" && test -f "$am_depcomp"; then - # We make a subdir and do the tests there. Otherwise we can end up - # making bogus files that we don't know about and never remove. For - # instance it was reported that on HP-UX the gcc test will end up - # making a dummy file named 'D' -- because '-MD' means "put the output - # in D". - rm -rf conftest.dir - mkdir conftest.dir - # Copy depcomp to subdir because otherwise we won't find it if we're - # using a relative directory. - cp "$am_depcomp" conftest.dir - cd conftest.dir - # We will build objects and dependencies in a subdirectory because - # it helps to detect inapplicable dependency modes. For instance - # both Tru64's cc and ICC support -MD to output dependencies as a - # side effect of compilation, but ICC will put the dependencies in - # the current directory while Tru64 will put them in the object - # directory. - mkdir sub - - am_cv_$1_dependencies_compiler_type=none - if test "$am_compiler_list" = ""; then - am_compiler_list=`sed -n ['s/^#*\([a-zA-Z0-9]*\))$/\1/p'] < ./depcomp` - fi - am__universal=false - m4_case([$1], [CC], - [case " $depcc " in #( - *\ -arch\ *\ -arch\ *) am__universal=true ;; - esac], - [CXX], - [case " $depcc " in #( - *\ -arch\ *\ -arch\ *) am__universal=true ;; - esac]) - - for depmode in $am_compiler_list; do - # Setup a source with many dependencies, because some compilers - # like to wrap large dependency lists on column 80 (with \), and - # we should not choose a depcomp mode which is confused by this. - # - # We need to recreate these files for each test, as the compiler may - # overwrite some of them when testing with obscure command lines. - # This happens at least with the AIX C compiler. - : > sub/conftest.c - for i in 1 2 3 4 5 6; do - echo '#include "conftst'$i'.h"' >> sub/conftest.c - # Using ": > sub/conftst$i.h" creates only sub/conftst1.h with - # Solaris 10 /bin/sh. - echo '/* dummy */' > sub/conftst$i.h - done - echo "${am__include} ${am__quote}sub/conftest.Po${am__quote}" > confmf - - # We check with '-c' and '-o' for the sake of the "dashmstdout" - # mode. It turns out that the SunPro C++ compiler does not properly - # handle '-M -o', and we need to detect this. Also, some Intel - # versions had trouble with output in subdirs. - am__obj=sub/conftest.${OBJEXT-o} - am__minus_obj="-o $am__obj" - case $depmode in - gcc) - # This depmode causes a compiler race in universal mode. - test "$am__universal" = false || continue - ;; - nosideeffect) - # After this tag, mechanisms are not by side-effect, so they'll - # only be used when explicitly requested. - if test "x$enable_dependency_tracking" = xyes; then - continue - else - break - fi - ;; - msvc7 | msvc7msys | msvisualcpp | msvcmsys) - # This compiler won't grok '-c -o', but also, the minuso test has - # not run yet. These depmodes are late enough in the game, and - # so weak that their functioning should not be impacted. - am__obj=conftest.${OBJEXT-o} - am__minus_obj= - ;; - none) break ;; - esac - if depmode=$depmode \ - source=sub/conftest.c object=$am__obj \ - depfile=sub/conftest.Po tmpdepfile=sub/conftest.TPo \ - $SHELL ./depcomp $depcc -c $am__minus_obj sub/conftest.c \ - >/dev/null 2>conftest.err && - grep sub/conftst1.h sub/conftest.Po > /dev/null 2>&1 && - grep sub/conftst6.h sub/conftest.Po > /dev/null 2>&1 && - grep $am__obj sub/conftest.Po > /dev/null 2>&1 && - ${MAKE-make} -s -f confmf > /dev/null 2>&1; then - # icc doesn't choke on unknown options, it will just issue warnings - # or remarks (even with -Werror). So we grep stderr for any message - # that says an option was ignored or not supported. - # When given -MP, icc 7.0 and 7.1 complain thusly: - # icc: Command line warning: ignoring option '-M'; no argument required - # The diagnosis changed in icc 8.0: - # icc: Command line remark: option '-MP' not supported - if (grep 'ignoring option' conftest.err || - grep 'not supported' conftest.err) >/dev/null 2>&1; then :; else - am_cv_$1_dependencies_compiler_type=$depmode - break - fi - fi - done - - cd .. - rm -rf conftest.dir -else - am_cv_$1_dependencies_compiler_type=none -fi -]) -AC_SUBST([$1DEPMODE], [depmode=$am_cv_$1_dependencies_compiler_type]) -AM_CONDITIONAL([am__fastdep$1], [ - test "x$enable_dependency_tracking" != xno \ - && test "$am_cv_$1_dependencies_compiler_type" = gcc3]) -]) -m4trace:/usr/share/aclocal-1.14/depend.m4:163: -1- AC_DEFUN([AM_SET_DEPDIR], [AC_REQUIRE([AM_SET_LEADING_DOT])dnl -AC_SUBST([DEPDIR], ["${am__leading_dot}deps"])dnl -]) -m4trace:/usr/share/aclocal-1.14/depend.m4:171: -1- AC_DEFUN([AM_DEP_TRACK], [AC_ARG_ENABLE([dependency-tracking], [dnl -AS_HELP_STRING( - [--enable-dependency-tracking], - [do not reject slow dependency extractors]) -AS_HELP_STRING( - [--disable-dependency-tracking], - [speeds up one-time build])]) -if test "x$enable_dependency_tracking" != xno; then - am_depcomp="$ac_aux_dir/depcomp" - AMDEPBACKSLASH='\' - am__nodep='_no' -fi -AM_CONDITIONAL([AMDEP], [test "x$enable_dependency_tracking" != xno]) -AC_SUBST([AMDEPBACKSLASH])dnl -_AM_SUBST_NOTMAKE([AMDEPBACKSLASH])dnl -AC_SUBST([am__nodep])dnl -_AM_SUBST_NOTMAKE([am__nodep])dnl -]) -m4trace:/usr/share/aclocal-1.14/depout.m4:12: -1- AC_DEFUN([_AM_OUTPUT_DEPENDENCY_COMMANDS], [{ - # Older Autoconf quotes --file arguments for eval, but not when files - # are listed without --file. Let's play safe and only enable the eval - # if we detect the quoting. - case $CONFIG_FILES in - *\'*) eval set x "$CONFIG_FILES" ;; - *) set x $CONFIG_FILES ;; - esac - shift - for mf - do - # Strip MF so we end up with the name of the file. - mf=`echo "$mf" | sed -e 's/:.*$//'` - # Check whether this is an Automake generated Makefile or not. - # We used to match only the files named 'Makefile.in', but - # some people rename them; so instead we look at the file content. - # Grep'ing the first line is not enough: some people post-process - # each Makefile.in and add a new line on top of each file to say so. - # Grep'ing the whole file is not good either: AIX grep has a line - # limit of 2048, but all sed's we know have understand at least 4000. - if sed -n 's,^#.*generated by automake.*,X,p' "$mf" | grep X >/dev/null 2>&1; then - dirpart=`AS_DIRNAME("$mf")` - else - continue - fi - # Extract the definition of DEPDIR, am__include, and am__quote - # from the Makefile without running 'make'. - DEPDIR=`sed -n 's/^DEPDIR = //p' < "$mf"` - test -z "$DEPDIR" && continue - am__include=`sed -n 's/^am__include = //p' < "$mf"` - test -z "$am__include" && continue - am__quote=`sed -n 's/^am__quote = //p' < "$mf"` - # Find all dependency output files, they are included files with - # $(DEPDIR) in their names. We invoke sed twice because it is the - # simplest approach to changing $(DEPDIR) to its actual value in the - # expansion. - for file in `sed -n " - s/^$am__include $am__quote\(.*(DEPDIR).*\)$am__quote"'$/\1/p' <"$mf" | \ - sed -e 's/\$(DEPDIR)/'"$DEPDIR"'/g'`; do - # Make sure the directory exists. - test -f "$dirpart/$file" && continue - fdir=`AS_DIRNAME(["$file"])` - AS_MKDIR_P([$dirpart/$fdir]) - # echo "creating $dirpart/$file" - echo '# dummy' > "$dirpart/$file" - done - done -} -]) -m4trace:/usr/share/aclocal-1.14/depout.m4:71: -1- AC_DEFUN([AM_OUTPUT_DEPENDENCY_COMMANDS], [AC_CONFIG_COMMANDS([depfiles], - [test x"$AMDEP_TRUE" != x"" || _AM_OUTPUT_DEPENDENCY_COMMANDS], - [AMDEP_TRUE="$AMDEP_TRUE" ac_aux_dir="$ac_aux_dir"]) -]) -m4trace:/usr/share/aclocal-1.14/init.m4:29: -1- AC_DEFUN([AM_INIT_AUTOMAKE], [AC_PREREQ([2.65])dnl -dnl Autoconf wants to disallow AM_ names. We explicitly allow -dnl the ones we care about. -m4_pattern_allow([^AM_[A-Z]+FLAGS$])dnl -AC_REQUIRE([AM_SET_CURRENT_AUTOMAKE_VERSION])dnl -AC_REQUIRE([AC_PROG_INSTALL])dnl -if test "`cd $srcdir && pwd`" != "`pwd`"; then - # Use -I$(srcdir) only when $(srcdir) != ., so that make's output - # is not polluted with repeated "-I." - AC_SUBST([am__isrc], [' -I$(srcdir)'])_AM_SUBST_NOTMAKE([am__isrc])dnl - # test to see if srcdir already configured - if test -f $srcdir/config.status; then - AC_MSG_ERROR([source directory already configured; run "make distclean" there first]) - fi -fi - -# test whether we have cygpath -if test -z "$CYGPATH_W"; then - if (cygpath --version) >/dev/null 2>/dev/null; then - CYGPATH_W='cygpath -w' - else - CYGPATH_W=echo - fi -fi -AC_SUBST([CYGPATH_W]) - -# Define the identity of the package. -dnl Distinguish between old-style and new-style calls. -m4_ifval([$2], -[AC_DIAGNOSE([obsolete], - [$0: two- and three-arguments forms are deprecated.]) -m4_ifval([$3], [_AM_SET_OPTION([no-define])])dnl - AC_SUBST([PACKAGE], [$1])dnl - AC_SUBST([VERSION], [$2])], -[_AM_SET_OPTIONS([$1])dnl -dnl Diagnose old-style AC_INIT with new-style AM_AUTOMAKE_INIT. -m4_if( - m4_ifdef([AC_PACKAGE_NAME], [ok]):m4_ifdef([AC_PACKAGE_VERSION], [ok]), - [ok:ok],, - [m4_fatal([AC_INIT should be called with package and version arguments])])dnl - AC_SUBST([PACKAGE], ['AC_PACKAGE_TARNAME'])dnl - AC_SUBST([VERSION], ['AC_PACKAGE_VERSION'])])dnl - -_AM_IF_OPTION([no-define],, -[AC_DEFINE_UNQUOTED([PACKAGE], ["$PACKAGE"], [Name of package]) - AC_DEFINE_UNQUOTED([VERSION], ["$VERSION"], [Version number of package])])dnl - -# Some tools Automake needs. -AC_REQUIRE([AM_SANITY_CHECK])dnl -AC_REQUIRE([AC_ARG_PROGRAM])dnl -AM_MISSING_PROG([ACLOCAL], [aclocal-${am__api_version}]) -AM_MISSING_PROG([AUTOCONF], [autoconf]) -AM_MISSING_PROG([AUTOMAKE], [automake-${am__api_version}]) -AM_MISSING_PROG([AUTOHEADER], [autoheader]) -AM_MISSING_PROG([MAKEINFO], [makeinfo]) -AC_REQUIRE([AM_PROG_INSTALL_SH])dnl -AC_REQUIRE([AM_PROG_INSTALL_STRIP])dnl -AC_REQUIRE([AC_PROG_MKDIR_P])dnl -# For better backward compatibility. To be removed once Automake 1.9.x -# dies out for good. For more background, see: -# -# -AC_SUBST([mkdir_p], ['$(MKDIR_P)']) -# We need awk for the "check" target. The system "awk" is bad on -# some platforms. -AC_REQUIRE([AC_PROG_AWK])dnl -AC_REQUIRE([AC_PROG_MAKE_SET])dnl -AC_REQUIRE([AM_SET_LEADING_DOT])dnl -_AM_IF_OPTION([tar-ustar], [_AM_PROG_TAR([ustar])], - [_AM_IF_OPTION([tar-pax], [_AM_PROG_TAR([pax])], - [_AM_PROG_TAR([v7])])]) -_AM_IF_OPTION([no-dependencies],, -[AC_PROVIDE_IFELSE([AC_PROG_CC], - [_AM_DEPENDENCIES([CC])], - [m4_define([AC_PROG_CC], - m4_defn([AC_PROG_CC])[_AM_DEPENDENCIES([CC])])])dnl -AC_PROVIDE_IFELSE([AC_PROG_CXX], - [_AM_DEPENDENCIES([CXX])], - [m4_define([AC_PROG_CXX], - m4_defn([AC_PROG_CXX])[_AM_DEPENDENCIES([CXX])])])dnl -AC_PROVIDE_IFELSE([AC_PROG_OBJC], - [_AM_DEPENDENCIES([OBJC])], - [m4_define([AC_PROG_OBJC], - m4_defn([AC_PROG_OBJC])[_AM_DEPENDENCIES([OBJC])])])dnl -AC_PROVIDE_IFELSE([AC_PROG_OBJCXX], - [_AM_DEPENDENCIES([OBJCXX])], - [m4_define([AC_PROG_OBJCXX], - m4_defn([AC_PROG_OBJCXX])[_AM_DEPENDENCIES([OBJCXX])])])dnl -]) -AC_REQUIRE([AM_SILENT_RULES])dnl -dnl The testsuite driver may need to know about EXEEXT, so add the -dnl 'am__EXEEXT' conditional if _AM_COMPILER_EXEEXT was seen. This -dnl macro is hooked onto _AC_COMPILER_EXEEXT early, see below. -AC_CONFIG_COMMANDS_PRE(dnl -[m4_provide_if([_AM_COMPILER_EXEEXT], - [AM_CONDITIONAL([am__EXEEXT], [test -n "$EXEEXT"])])])dnl - -# POSIX will say in a future version that running "rm -f" with no argument -# is OK; and we want to be able to make that assumption in our Makefile -# recipes. So use an aggressive probe to check that the usage we want is -# actually supported "in the wild" to an acceptable degree. -# See automake bug#10828. -# To make any issue more visible, cause the running configure to be aborted -# by default if the 'rm' program in use doesn't match our expectations; the -# user can still override this though. -if rm -f && rm -fr && rm -rf; then : OK; else - cat >&2 <<'END' -Oops! - -Your 'rm' program seems unable to run without file operands specified -on the command line, even when the '-f' option is present. This is contrary -to the behaviour of most rm programs out there, and not conforming with -the upcoming POSIX standard: - -Please tell bug-automake@gnu.org about your system, including the value -of your $PATH and any error possibly output before this message. This -can help us improve future automake versions. - -END - if test x"$ACCEPT_INFERIOR_RM_PROGRAM" = x"yes"; then - echo 'Configuration will proceed anyway, since you have set the' >&2 - echo 'ACCEPT_INFERIOR_RM_PROGRAM variable to "yes"' >&2 - echo >&2 - else - cat >&2 <<'END' -Aborting the configuration process, to ensure you take notice of the issue. - -You can download and install GNU coreutils to get an 'rm' implementation -that behaves properly: . - -If you want to complete the configuration process using your problematic -'rm' anyway, export the environment variable ACCEPT_INFERIOR_RM_PROGRAM -to "yes", and re-run configure. - -END - AC_MSG_ERROR([Your 'rm' program is bad, sorry.]) - fi -fi -]) -m4trace:/usr/share/aclocal-1.14/init.m4:183: -1- AC_DEFUN([_AC_AM_CONFIG_HEADER_HOOK], [# Compute $1's index in $config_headers. -_am_arg=$1 -_am_stamp_count=1 -for _am_header in $config_headers :; do - case $_am_header in - $_am_arg | $_am_arg:* ) - break ;; - * ) - _am_stamp_count=`expr $_am_stamp_count + 1` ;; - esac -done -echo "timestamp for $_am_arg" >`AS_DIRNAME(["$_am_arg"])`/stamp-h[]$_am_stamp_count]) -m4trace:/usr/share/aclocal-1.14/install-sh.m4:11: -1- AC_DEFUN([AM_PROG_INSTALL_SH], [AC_REQUIRE([AM_AUX_DIR_EXPAND])dnl -if test x"${install_sh}" != xset; then - case $am_aux_dir in - *\ * | *\ *) - install_sh="\${SHELL} '$am_aux_dir/install-sh'" ;; - *) - install_sh="\${SHELL} $am_aux_dir/install-sh" - esac -fi -AC_SUBST([install_sh])]) -m4trace:/usr/share/aclocal-1.14/lead-dot.m4:10: -1- AC_DEFUN([AM_SET_LEADING_DOT], [rm -rf .tst 2>/dev/null -mkdir .tst 2>/dev/null -if test -d .tst; then - am__leading_dot=. -else - am__leading_dot=_ -fi -rmdir .tst 2>/dev/null -AC_SUBST([am__leading_dot])]) -m4trace:/usr/share/aclocal-1.14/make.m4:12: -1- AC_DEFUN([AM_MAKE_INCLUDE], [am_make=${MAKE-make} -cat > confinc << 'END' -am__doit: - @echo this is the am__doit target -.PHONY: am__doit -END -# If we don't find an include directive, just comment out the code. -AC_MSG_CHECKING([for style of include used by $am_make]) -am__include="#" -am__quote= -_am_result=none -# First try GNU make style include. -echo "include confinc" > confmf -# Ignore all kinds of additional output from 'make'. -case `$am_make -s -f confmf 2> /dev/null` in #( -*the\ am__doit\ target*) - am__include=include - am__quote= - _am_result=GNU - ;; -esac -# Now try BSD make style include. -if test "$am__include" = "#"; then - echo '.include "confinc"' > confmf - case `$am_make -s -f confmf 2> /dev/null` in #( - *the\ am__doit\ target*) - am__include=.include - am__quote="\"" - _am_result=BSD - ;; - esac -fi -AC_SUBST([am__include]) -AC_SUBST([am__quote]) -AC_MSG_RESULT([$_am_result]) -rm -f confinc confmf -]) -m4trace:/usr/share/aclocal-1.14/missing.m4:11: -1- AC_DEFUN([AM_MISSING_PROG], [AC_REQUIRE([AM_MISSING_HAS_RUN]) -$1=${$1-"${am_missing_run}$2"} -AC_SUBST($1)]) -m4trace:/usr/share/aclocal-1.14/missing.m4:20: -1- AC_DEFUN([AM_MISSING_HAS_RUN], [AC_REQUIRE([AM_AUX_DIR_EXPAND])dnl -AC_REQUIRE_AUX_FILE([missing])dnl -if test x"${MISSING+set}" != xset; then - case $am_aux_dir in - *\ * | *\ *) - MISSING="\${SHELL} \"$am_aux_dir/missing\"" ;; - *) - MISSING="\${SHELL} $am_aux_dir/missing" ;; - esac -fi -# Use eval to expand $SHELL -if eval "$MISSING --is-lightweight"; then - am_missing_run="$MISSING " -else - am_missing_run= - AC_MSG_WARN(['missing' script is too old or missing]) -fi -]) -m4trace:/usr/share/aclocal-1.14/options.m4:11: -1- AC_DEFUN([_AM_MANGLE_OPTION], [[_AM_OPTION_]m4_bpatsubst($1, [[^a-zA-Z0-9_]], [_])]) -m4trace:/usr/share/aclocal-1.14/options.m4:17: -1- AC_DEFUN([_AM_SET_OPTION], [m4_define(_AM_MANGLE_OPTION([$1]), [1])]) -m4trace:/usr/share/aclocal-1.14/options.m4:23: -1- AC_DEFUN([_AM_SET_OPTIONS], [m4_foreach_w([_AM_Option], [$1], [_AM_SET_OPTION(_AM_Option)])]) -m4trace:/usr/share/aclocal-1.14/options.m4:29: -1- AC_DEFUN([_AM_IF_OPTION], [m4_ifset(_AM_MANGLE_OPTION([$1]), [$2], [$3])]) -m4trace:/usr/share/aclocal-1.14/prog-cc-c-o.m4:12: -1- AC_DEFUN([_AM_PROG_CC_C_O], [AC_REQUIRE([AM_AUX_DIR_EXPAND])dnl -AC_REQUIRE_AUX_FILE([compile])dnl -AC_LANG_PUSH([C])dnl -AC_CACHE_CHECK( - [whether $CC understands -c and -o together], - [am_cv_prog_cc_c_o], - [AC_LANG_CONFTEST([AC_LANG_PROGRAM([])]) - # Make sure it works both with $CC and with simple cc. - # Following AC_PROG_CC_C_O, we do the test twice because some - # compilers refuse to overwrite an existing .o file with -o, - # though they will create one. - am_cv_prog_cc_c_o=yes - for am_i in 1 2; do - if AM_RUN_LOG([$CC -c conftest.$ac_ext -o conftest2.$ac_objext]) \ - && test -f conftest2.$ac_objext; then - : OK - else - am_cv_prog_cc_c_o=no - break - fi - done - rm -f core conftest* - unset am_i]) -if test "$am_cv_prog_cc_c_o" != yes; then - # Losing compiler, so override with the script. - # FIXME: It is wrong to rewrite CC. - # But if we don't then we get into trouble of one sort or another. - # A longer-term fix would be to have automake use am__CC in this case, - # and then we could set am__CC="\$(top_srcdir)/compile \$(CC)" - CC="$am_aux_dir/compile $CC" -fi -AC_LANG_POP([C])]) -m4trace:/usr/share/aclocal-1.14/prog-cc-c-o.m4:47: -1- AC_DEFUN_ONCE([AM_PROG_CC_C_O], [AC_REQUIRE([AC_PROG_CC])]) -m4trace:/usr/share/aclocal-1.14/runlog.m4:12: -1- AC_DEFUN([AM_RUN_LOG], [{ echo "$as_me:$LINENO: $1" >&AS_MESSAGE_LOG_FD - ($1) >&AS_MESSAGE_LOG_FD 2>&AS_MESSAGE_LOG_FD - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&AS_MESSAGE_LOG_FD - (exit $ac_status); }]) -m4trace:/usr/share/aclocal-1.14/sanity.m4:11: -1- AC_DEFUN([AM_SANITY_CHECK], [AC_MSG_CHECKING([whether build environment is sane]) -# Reject unsafe characters in $srcdir or the absolute working directory -# name. Accept space and tab only in the latter. -am_lf=' -' -case `pwd` in - *[[\\\"\#\$\&\'\`$am_lf]]*) - AC_MSG_ERROR([unsafe absolute working directory name]);; -esac -case $srcdir in - *[[\\\"\#\$\&\'\`$am_lf\ \ ]]*) - AC_MSG_ERROR([unsafe srcdir value: '$srcdir']);; -esac - -# Do 'set' in a subshell so we don't clobber the current shell's -# arguments. Must try -L first in case configure is actually a -# symlink; some systems play weird games with the mod time of symlinks -# (eg FreeBSD returns the mod time of the symlink's containing -# directory). -if ( - am_has_slept=no - for am_try in 1 2; do - echo "timestamp, slept: $am_has_slept" > conftest.file - set X `ls -Lt "$srcdir/configure" conftest.file 2> /dev/null` - if test "$[*]" = "X"; then - # -L didn't work. - set X `ls -t "$srcdir/configure" conftest.file` - fi - if test "$[*]" != "X $srcdir/configure conftest.file" \ - && test "$[*]" != "X conftest.file $srcdir/configure"; then - - # If neither matched, then we have a broken ls. This can happen - # if, for instance, CONFIG_SHELL is bash and it inherits a - # broken ls alias from the environment. This has actually - # happened. Such a system could not be considered "sane". - AC_MSG_ERROR([ls -t appears to fail. Make sure there is not a broken - alias in your environment]) - fi - if test "$[2]" = conftest.file || test $am_try -eq 2; then - break - fi - # Just in case. - sleep 1 - am_has_slept=yes - done - test "$[2]" = conftest.file - ) -then - # Ok. - : -else - AC_MSG_ERROR([newly created file is older than distributed files! -Check your system clock]) -fi -AC_MSG_RESULT([yes]) -# If we didn't sleep, we still need to ensure time stamps of config.status and -# generated files are strictly newer. -am_sleep_pid= -if grep 'slept: no' conftest.file >/dev/null 2>&1; then - ( sleep 1 ) & - am_sleep_pid=$! -fi -AC_CONFIG_COMMANDS_PRE( - [AC_MSG_CHECKING([that generated files are newer than configure]) - if test -n "$am_sleep_pid"; then - # Hide warnings about reused PIDs. - wait $am_sleep_pid 2>/dev/null - fi - AC_MSG_RESULT([done])]) -rm -f conftest.file -]) -m4trace:/usr/share/aclocal-1.14/silent.m4:12: -1- AC_DEFUN([AM_SILENT_RULES], [AC_ARG_ENABLE([silent-rules], [dnl -AS_HELP_STRING( - [--enable-silent-rules], - [less verbose build output (undo: "make V=1")]) -AS_HELP_STRING( - [--disable-silent-rules], - [verbose build output (undo: "make V=0")])dnl -]) -case $enable_silent_rules in @%:@ ((( - yes) AM_DEFAULT_VERBOSITY=0;; - no) AM_DEFAULT_VERBOSITY=1;; - *) AM_DEFAULT_VERBOSITY=m4_if([$1], [yes], [0], [1]);; -esac -dnl -dnl A few 'make' implementations (e.g., NonStop OS and NextStep) -dnl do not support nested variable expansions. -dnl See automake bug#9928 and bug#10237. -am_make=${MAKE-make} -AC_CACHE_CHECK([whether $am_make supports nested variables], - [am_cv_make_support_nested_variables], - [if AS_ECHO([['TRUE=$(BAR$(V)) -BAR0=false -BAR1=true -V=1 -am__doit: - @$(TRUE) -.PHONY: am__doit']]) | $am_make -f - >/dev/null 2>&1; then - am_cv_make_support_nested_variables=yes -else - am_cv_make_support_nested_variables=no -fi]) -if test $am_cv_make_support_nested_variables = yes; then - dnl Using '$V' instead of '$(V)' breaks IRIX make. - AM_V='$(V)' - AM_DEFAULT_V='$(AM_DEFAULT_VERBOSITY)' -else - AM_V=$AM_DEFAULT_VERBOSITY - AM_DEFAULT_V=$AM_DEFAULT_VERBOSITY -fi -AC_SUBST([AM_V])dnl -AM_SUBST_NOTMAKE([AM_V])dnl -AC_SUBST([AM_DEFAULT_V])dnl -AM_SUBST_NOTMAKE([AM_DEFAULT_V])dnl -AC_SUBST([AM_DEFAULT_VERBOSITY])dnl -AM_BACKSLASH='\' -AC_SUBST([AM_BACKSLASH])dnl -_AM_SUBST_NOTMAKE([AM_BACKSLASH])dnl -]) -m4trace:/usr/share/aclocal-1.14/strip.m4:17: -1- AC_DEFUN([AM_PROG_INSTALL_STRIP], [AC_REQUIRE([AM_PROG_INSTALL_SH])dnl -# Installed binaries are usually stripped using 'strip' when the user -# run "make install-strip". However 'strip' might not be the right -# tool to use in cross-compilation environments, therefore Automake -# will honor the 'STRIP' environment variable to overrule this program. -dnl Don't test for $cross_compiling = yes, because it might be 'maybe'. -if test "$cross_compiling" != no; then - AC_CHECK_TOOL([STRIP], [strip], :) -fi -INSTALL_STRIP_PROGRAM="\$(install_sh) -c -s" -AC_SUBST([INSTALL_STRIP_PROGRAM])]) -m4trace:/usr/share/aclocal-1.14/substnot.m4:12: -1- AC_DEFUN([_AM_SUBST_NOTMAKE]) -m4trace:/usr/share/aclocal-1.14/substnot.m4:17: -1- AC_DEFUN([AM_SUBST_NOTMAKE], [_AM_SUBST_NOTMAKE($@)]) -m4trace:/usr/share/aclocal-1.14/tar.m4:23: -1- AC_DEFUN([_AM_PROG_TAR], [# Always define AMTAR for backward compatibility. Yes, it's still used -# in the wild :-( We should find a proper way to deprecate it ... -AC_SUBST([AMTAR], ['$${TAR-tar}']) - -# We'll loop over all known methods to create a tar archive until one works. -_am_tools='gnutar m4_if([$1], [ustar], [plaintar]) pax cpio none' - -m4_if([$1], [v7], - [am__tar='$${TAR-tar} chof - "$$tardir"' am__untar='$${TAR-tar} xf -'], - - [m4_case([$1], - [ustar], - [# The POSIX 1988 'ustar' format is defined with fixed-size fields. - # There is notably a 21 bits limit for the UID and the GID. In fact, - # the 'pax' utility can hang on bigger UID/GID (see automake bug#8343 - # and bug#13588). - am_max_uid=2097151 # 2^21 - 1 - am_max_gid=$am_max_uid - # The $UID and $GID variables are not portable, so we need to resort - # to the POSIX-mandated id(1) utility. Errors in the 'id' calls - # below are definitely unexpected, so allow the users to see them - # (that is, avoid stderr redirection). - am_uid=`id -u || echo unknown` - am_gid=`id -g || echo unknown` - AC_MSG_CHECKING([whether UID '$am_uid' is supported by ustar format]) - if test $am_uid -le $am_max_uid; then - AC_MSG_RESULT([yes]) - else - AC_MSG_RESULT([no]) - _am_tools=none - fi - AC_MSG_CHECKING([whether GID '$am_gid' is supported by ustar format]) - if test $am_gid -le $am_max_gid; then - AC_MSG_RESULT([yes]) - else - AC_MSG_RESULT([no]) - _am_tools=none - fi], - - [pax], - [], - - [m4_fatal([Unknown tar format])]) - - AC_MSG_CHECKING([how to create a $1 tar archive]) - - # Go ahead even if we have the value already cached. We do so because we - # need to set the values for the 'am__tar' and 'am__untar' variables. - _am_tools=${am_cv_prog_tar_$1-$_am_tools} - - for _am_tool in $_am_tools; do - case $_am_tool in - gnutar) - for _am_tar in tar gnutar gtar; do - AM_RUN_LOG([$_am_tar --version]) && break - done - am__tar="$_am_tar --format=m4_if([$1], [pax], [posix], [$1]) -chf - "'"$$tardir"' - am__tar_="$_am_tar --format=m4_if([$1], [pax], [posix], [$1]) -chf - "'"$tardir"' - am__untar="$_am_tar -xf -" - ;; - plaintar) - # Must skip GNU tar: if it does not support --format= it doesn't create - # ustar tarball either. - (tar --version) >/dev/null 2>&1 && continue - am__tar='tar chf - "$$tardir"' - am__tar_='tar chf - "$tardir"' - am__untar='tar xf -' - ;; - pax) - am__tar='pax -L -x $1 -w "$$tardir"' - am__tar_='pax -L -x $1 -w "$tardir"' - am__untar='pax -r' - ;; - cpio) - am__tar='find "$$tardir" -print | cpio -o -H $1 -L' - am__tar_='find "$tardir" -print | cpio -o -H $1 -L' - am__untar='cpio -i -H $1 -d' - ;; - none) - am__tar=false - am__tar_=false - am__untar=false - ;; - esac - - # If the value was cached, stop now. We just wanted to have am__tar - # and am__untar set. - test -n "${am_cv_prog_tar_$1}" && break - - # tar/untar a dummy directory, and stop if the command works. - rm -rf conftest.dir - mkdir conftest.dir - echo GrepMe > conftest.dir/file - AM_RUN_LOG([tardir=conftest.dir && eval $am__tar_ >conftest.tar]) - rm -rf conftest.dir - if test -s conftest.tar; then - AM_RUN_LOG([$am__untar /dev/null 2>&1 && break - fi - done - rm -rf conftest.dir - - AC_CACHE_VAL([am_cv_prog_tar_$1], [am_cv_prog_tar_$1=$_am_tool]) - AC_MSG_RESULT([$am_cv_prog_tar_$1])]) - -AC_SUBST([am__tar]) -AC_SUBST([am__untar]) -]) -m4trace:configure.ac:2: -1- m4_pattern_forbid([^_?A[CHUM]_]) -m4trace:configure.ac:2: -1- m4_pattern_forbid([_AC_]) -m4trace:configure.ac:2: -1- m4_pattern_forbid([^LIBOBJS$], [do not use LIBOBJS directly, use AC_LIBOBJ (see section `AC_LIBOBJ vs LIBOBJS']) -m4trace:configure.ac:2: -1- m4_pattern_allow([^AS_FLAGS$]) -m4trace:configure.ac:2: -1- m4_pattern_forbid([^_?m4_]) -m4trace:configure.ac:2: -1- m4_pattern_forbid([^dnl$]) -m4trace:configure.ac:2: -1- m4_pattern_forbid([^_?AS_]) -m4trace:configure.ac:2: -1- m4_pattern_allow([^SHELL$]) -m4trace:configure.ac:2: -1- m4_pattern_allow([^PATH_SEPARATOR$]) -m4trace:configure.ac:2: -1- m4_pattern_allow([^PACKAGE_NAME$]) -m4trace:configure.ac:2: -1- m4_pattern_allow([^PACKAGE_TARNAME$]) -m4trace:configure.ac:2: -1- m4_pattern_allow([^PACKAGE_VERSION$]) -m4trace:configure.ac:2: -1- m4_pattern_allow([^PACKAGE_STRING$]) -m4trace:configure.ac:2: -1- m4_pattern_allow([^PACKAGE_BUGREPORT$]) -m4trace:configure.ac:2: -1- m4_pattern_allow([^PACKAGE_URL$]) -m4trace:configure.ac:2: -1- m4_pattern_allow([^exec_prefix$]) -m4trace:configure.ac:2: -1- m4_pattern_allow([^prefix$]) -m4trace:configure.ac:2: -1- m4_pattern_allow([^program_transform_name$]) -m4trace:configure.ac:2: -1- m4_pattern_allow([^bindir$]) -m4trace:configure.ac:2: -1- m4_pattern_allow([^sbindir$]) -m4trace:configure.ac:2: -1- m4_pattern_allow([^libexecdir$]) -m4trace:configure.ac:2: -1- m4_pattern_allow([^datarootdir$]) -m4trace:configure.ac:2: -1- m4_pattern_allow([^datadir$]) -m4trace:configure.ac:2: -1- m4_pattern_allow([^sysconfdir$]) -m4trace:configure.ac:2: -1- m4_pattern_allow([^sharedstatedir$]) -m4trace:configure.ac:2: -1- m4_pattern_allow([^localstatedir$]) -m4trace:configure.ac:2: -1- m4_pattern_allow([^includedir$]) -m4trace:configure.ac:2: -1- m4_pattern_allow([^oldincludedir$]) -m4trace:configure.ac:2: -1- m4_pattern_allow([^docdir$]) -m4trace:configure.ac:2: -1- m4_pattern_allow([^infodir$]) -m4trace:configure.ac:2: -1- m4_pattern_allow([^htmldir$]) -m4trace:configure.ac:2: -1- m4_pattern_allow([^dvidir$]) -m4trace:configure.ac:2: -1- m4_pattern_allow([^pdfdir$]) -m4trace:configure.ac:2: -1- m4_pattern_allow([^psdir$]) -m4trace:configure.ac:2: -1- m4_pattern_allow([^libdir$]) -m4trace:configure.ac:2: -1- m4_pattern_allow([^localedir$]) -m4trace:configure.ac:2: -1- m4_pattern_allow([^mandir$]) -m4trace:configure.ac:2: -1- m4_pattern_allow([^PACKAGE_NAME$]) -m4trace:configure.ac:2: -1- m4_pattern_allow([^PACKAGE_TARNAME$]) -m4trace:configure.ac:2: -1- m4_pattern_allow([^PACKAGE_VERSION$]) -m4trace:configure.ac:2: -1- m4_pattern_allow([^PACKAGE_STRING$]) -m4trace:configure.ac:2: -1- m4_pattern_allow([^PACKAGE_BUGREPORT$]) -m4trace:configure.ac:2: -1- m4_pattern_allow([^PACKAGE_URL$]) -m4trace:configure.ac:2: -1- m4_pattern_allow([^DEFS$]) -m4trace:configure.ac:2: -1- m4_pattern_allow([^ECHO_C$]) -m4trace:configure.ac:2: -1- m4_pattern_allow([^ECHO_N$]) -m4trace:configure.ac:2: -1- m4_pattern_allow([^ECHO_T$]) -m4trace:configure.ac:2: -1- m4_pattern_allow([^LIBS$]) -m4trace:configure.ac:2: -1- m4_pattern_allow([^build_alias$]) -m4trace:configure.ac:2: -1- m4_pattern_allow([^host_alias$]) -m4trace:configure.ac:2: -1- m4_pattern_allow([^target_alias$]) -m4trace:configure.ac:3: -1- AM_INIT_AUTOMAKE([silent-rules]) -m4trace:configure.ac:3: -1- m4_pattern_allow([^AM_[A-Z]+FLAGS$]) -m4trace:configure.ac:3: -1- AM_SET_CURRENT_AUTOMAKE_VERSION -m4trace:configure.ac:3: -1- AM_AUTOMAKE_VERSION([1.14.1]) -m4trace:configure.ac:3: -1- _AM_AUTOCONF_VERSION([2.69]) -m4trace:configure.ac:3: -1- m4_pattern_allow([^INSTALL_PROGRAM$]) -m4trace:configure.ac:3: -1- m4_pattern_allow([^INSTALL_SCRIPT$]) -m4trace:configure.ac:3: -1- m4_pattern_allow([^INSTALL_DATA$]) -m4trace:configure.ac:3: -1- m4_pattern_allow([^am__isrc$]) -m4trace:configure.ac:3: -1- _AM_SUBST_NOTMAKE([am__isrc]) -m4trace:configure.ac:3: -1- m4_pattern_allow([^CYGPATH_W$]) -m4trace:configure.ac:3: -1- _AM_SET_OPTIONS([silent-rules]) -m4trace:configure.ac:3: -1- _AM_SET_OPTION([silent-rules]) -m4trace:configure.ac:3: -2- _AM_MANGLE_OPTION([silent-rules]) -m4trace:configure.ac:3: -1- m4_pattern_allow([^PACKAGE$]) -m4trace:configure.ac:3: -1- m4_pattern_allow([^VERSION$]) -m4trace:configure.ac:3: -1- _AM_IF_OPTION([no-define], [], [AC_DEFINE_UNQUOTED([PACKAGE], ["$PACKAGE"], [Name of package]) - AC_DEFINE_UNQUOTED([VERSION], ["$VERSION"], [Version number of package])]) -m4trace:configure.ac:3: -2- _AM_MANGLE_OPTION([no-define]) -m4trace:configure.ac:3: -1- m4_pattern_allow([^PACKAGE$]) -m4trace:configure.ac:3: -1- m4_pattern_allow([^VERSION$]) -m4trace:configure.ac:3: -1- AM_SANITY_CHECK -m4trace:configure.ac:3: -1- AM_MISSING_PROG([ACLOCAL], [aclocal-${am__api_version}]) -m4trace:configure.ac:3: -1- AM_MISSING_HAS_RUN -m4trace:configure.ac:3: -1- AM_AUX_DIR_EXPAND -m4trace:configure.ac:3: -1- m4_pattern_allow([^ACLOCAL$]) -m4trace:configure.ac:3: -1- AM_MISSING_PROG([AUTOCONF], [autoconf]) -m4trace:configure.ac:3: -1- m4_pattern_allow([^AUTOCONF$]) -m4trace:configure.ac:3: -1- AM_MISSING_PROG([AUTOMAKE], [automake-${am__api_version}]) -m4trace:configure.ac:3: -1- m4_pattern_allow([^AUTOMAKE$]) -m4trace:configure.ac:3: -1- AM_MISSING_PROG([AUTOHEADER], [autoheader]) -m4trace:configure.ac:3: -1- m4_pattern_allow([^AUTOHEADER$]) -m4trace:configure.ac:3: -1- AM_MISSING_PROG([MAKEINFO], [makeinfo]) -m4trace:configure.ac:3: -1- m4_pattern_allow([^MAKEINFO$]) -m4trace:configure.ac:3: -1- AM_PROG_INSTALL_SH -m4trace:configure.ac:3: -1- m4_pattern_allow([^install_sh$]) -m4trace:configure.ac:3: -1- AM_PROG_INSTALL_STRIP -m4trace:configure.ac:3: -1- m4_pattern_allow([^STRIP$]) -m4trace:configure.ac:3: -1- m4_pattern_allow([^INSTALL_STRIP_PROGRAM$]) -m4trace:configure.ac:3: -1- m4_pattern_allow([^MKDIR_P$]) -m4trace:configure.ac:3: -1- m4_pattern_allow([^mkdir_p$]) -m4trace:configure.ac:3: -1- m4_pattern_allow([^AWK$]) -m4trace:configure.ac:3: -1- m4_pattern_allow([^SET_MAKE$]) -m4trace:configure.ac:3: -1- AM_SET_LEADING_DOT -m4trace:configure.ac:3: -1- m4_pattern_allow([^am__leading_dot$]) -m4trace:configure.ac:3: -1- _AM_IF_OPTION([tar-ustar], [_AM_PROG_TAR([ustar])], [_AM_IF_OPTION([tar-pax], [_AM_PROG_TAR([pax])], - [_AM_PROG_TAR([v7])])]) -m4trace:configure.ac:3: -2- _AM_MANGLE_OPTION([tar-ustar]) -m4trace:configure.ac:3: -1- _AM_IF_OPTION([tar-pax], [_AM_PROG_TAR([pax])], [_AM_PROG_TAR([v7])]) -m4trace:configure.ac:3: -2- _AM_MANGLE_OPTION([tar-pax]) -m4trace:configure.ac:3: -1- _AM_PROG_TAR([v7]) -m4trace:configure.ac:3: -1- m4_pattern_allow([^AMTAR$]) -m4trace:configure.ac:3: -1- m4_pattern_allow([^am__tar$]) -m4trace:configure.ac:3: -1- m4_pattern_allow([^am__untar$]) -m4trace:configure.ac:3: -1- _AM_IF_OPTION([no-dependencies], [], [AC_PROVIDE_IFELSE([AC_PROG_CC], - [_AM_DEPENDENCIES([CC])], - [m4_define([AC_PROG_CC], - m4_defn([AC_PROG_CC])[_AM_DEPENDENCIES([CC])])])dnl -AC_PROVIDE_IFELSE([AC_PROG_CXX], - [_AM_DEPENDENCIES([CXX])], - [m4_define([AC_PROG_CXX], - m4_defn([AC_PROG_CXX])[_AM_DEPENDENCIES([CXX])])])dnl -AC_PROVIDE_IFELSE([AC_PROG_OBJC], - [_AM_DEPENDENCIES([OBJC])], - [m4_define([AC_PROG_OBJC], - m4_defn([AC_PROG_OBJC])[_AM_DEPENDENCIES([OBJC])])])dnl -AC_PROVIDE_IFELSE([AC_PROG_OBJCXX], - [_AM_DEPENDENCIES([OBJCXX])], - [m4_define([AC_PROG_OBJCXX], - m4_defn([AC_PROG_OBJCXX])[_AM_DEPENDENCIES([OBJCXX])])])dnl -]) -m4trace:configure.ac:3: -2- _AM_MANGLE_OPTION([no-dependencies]) -m4trace:configure.ac:3: -1- AM_SILENT_RULES -m4trace:configure.ac:3: -1- m4_pattern_allow([^AM_V$]) -m4trace:configure.ac:3: -1- AM_SUBST_NOTMAKE([AM_V]) -m4trace:configure.ac:3: -1- _AM_SUBST_NOTMAKE([AM_V]) -m4trace:configure.ac:3: -1- m4_pattern_allow([^AM_DEFAULT_V$]) -m4trace:configure.ac:3: -1- AM_SUBST_NOTMAKE([AM_DEFAULT_V]) -m4trace:configure.ac:3: -1- _AM_SUBST_NOTMAKE([AM_DEFAULT_V]) -m4trace:configure.ac:3: -1- m4_pattern_allow([^AM_DEFAULT_VERBOSITY$]) -m4trace:configure.ac:3: -1- m4_pattern_allow([^AM_BACKSLASH$]) -m4trace:configure.ac:3: -1- _AM_SUBST_NOTMAKE([AM_BACKSLASH]) -m4trace:configure.ac:8: -1- m4_pattern_allow([^CC$]) -m4trace:configure.ac:8: -1- m4_pattern_allow([^CFLAGS$]) -m4trace:configure.ac:8: -1- m4_pattern_allow([^LDFLAGS$]) -m4trace:configure.ac:8: -1- m4_pattern_allow([^LIBS$]) -m4trace:configure.ac:8: -1- m4_pattern_allow([^CPPFLAGS$]) -m4trace:configure.ac:8: -1- m4_pattern_allow([^CC$]) -m4trace:configure.ac:8: -1- m4_pattern_allow([^CC$]) -m4trace:configure.ac:8: -1- m4_pattern_allow([^CC$]) -m4trace:configure.ac:8: -1- m4_pattern_allow([^CC$]) -m4trace:configure.ac:8: -1- m4_pattern_allow([^ac_ct_CC$]) -m4trace:configure.ac:8: -1- m4_pattern_allow([^EXEEXT$]) -m4trace:configure.ac:8: -1- m4_pattern_allow([^OBJEXT$]) -m4trace:configure.ac:8: -1- _AM_PROG_CC_C_O -m4trace:configure.ac:8: -1- AM_RUN_LOG([$CC -c conftest.$ac_ext -o conftest2.$ac_objext]) -m4trace:configure.ac:8: -1- _AM_DEPENDENCIES([CC]) -m4trace:configure.ac:8: -1- AM_SET_DEPDIR -m4trace:configure.ac:8: -1- m4_pattern_allow([^DEPDIR$]) -m4trace:configure.ac:8: -1- AM_OUTPUT_DEPENDENCY_COMMANDS -m4trace:configure.ac:8: -1- AM_MAKE_INCLUDE -m4trace:configure.ac:8: -1- m4_pattern_allow([^am__include$]) -m4trace:configure.ac:8: -1- m4_pattern_allow([^am__quote$]) -m4trace:configure.ac:8: -1- AM_DEP_TRACK -m4trace:configure.ac:8: -1- AM_CONDITIONAL([AMDEP], [test "x$enable_dependency_tracking" != xno]) -m4trace:configure.ac:8: -1- m4_pattern_allow([^AMDEP_TRUE$]) -m4trace:configure.ac:8: -1- m4_pattern_allow([^AMDEP_FALSE$]) -m4trace:configure.ac:8: -1- _AM_SUBST_NOTMAKE([AMDEP_TRUE]) -m4trace:configure.ac:8: -1- _AM_SUBST_NOTMAKE([AMDEP_FALSE]) -m4trace:configure.ac:8: -1- m4_pattern_allow([^AMDEPBACKSLASH$]) -m4trace:configure.ac:8: -1- _AM_SUBST_NOTMAKE([AMDEPBACKSLASH]) -m4trace:configure.ac:8: -1- m4_pattern_allow([^am__nodep$]) -m4trace:configure.ac:8: -1- _AM_SUBST_NOTMAKE([am__nodep]) -m4trace:configure.ac:8: -1- m4_pattern_allow([^CCDEPMODE$]) -m4trace:configure.ac:8: -1- AM_CONDITIONAL([am__fastdepCC], [ - test "x$enable_dependency_tracking" != xno \ - && test "$am_cv_CC_dependencies_compiler_type" = gcc3]) -m4trace:configure.ac:8: -1- m4_pattern_allow([^am__fastdepCC_TRUE$]) -m4trace:configure.ac:8: -1- m4_pattern_allow([^am__fastdepCC_FALSE$]) -m4trace:configure.ac:8: -1- _AM_SUBST_NOTMAKE([am__fastdepCC_TRUE]) -m4trace:configure.ac:8: -1- _AM_SUBST_NOTMAKE([am__fastdepCC_FALSE]) -m4trace:configure.ac:10: -1- AM_PROG_CC_C_O -m4trace:configure.ac:21: -1- m4_pattern_allow([^LIB@&t@OBJS$]) -m4trace:configure.ac:21: -1- m4_pattern_allow([^LTLIBOBJS$]) -m4trace:configure.ac:21: -1- AM_CONDITIONAL([am__EXEEXT], [test -n "$EXEEXT"]) -m4trace:configure.ac:21: -1- m4_pattern_allow([^am__EXEEXT_TRUE$]) -m4trace:configure.ac:21: -1- m4_pattern_allow([^am__EXEEXT_FALSE$]) -m4trace:configure.ac:21: -1- _AM_SUBST_NOTMAKE([am__EXEEXT_TRUE]) -m4trace:configure.ac:21: -1- _AM_SUBST_NOTMAKE([am__EXEEXT_FALSE]) -m4trace:configure.ac:21: -1- _AC_AM_CONFIG_HEADER_HOOK(["$ac_file"]) -m4trace:configure.ac:21: -1- _AM_OUTPUT_DEPENDENCY_COMMANDS diff --git a/distribution/yocto-advanced/poky/meta-mini/recipes-hello/autohello/files/autohello/autom4te.cache/traces.1 b/distribution/yocto-advanced/poky/meta-mini/recipes-hello/autohello/files/autohello/autom4te.cache/traces.1 deleted file mode 100644 index b0c03d0..0000000 --- a/distribution/yocto-advanced/poky/meta-mini/recipes-hello/autohello/files/autohello/autom4te.cache/traces.1 +++ /dev/null @@ -1,354 +0,0 @@ -m4trace:configure.ac:2: -1- AC_INIT([autohello], [1.1], [maunt@linutronix.de]) -m4trace:configure.ac:2: -1- m4_pattern_forbid([^_?A[CHUM]_]) -m4trace:configure.ac:2: -1- m4_pattern_forbid([_AC_]) -m4trace:configure.ac:2: -1- m4_pattern_forbid([^LIBOBJS$], [do not use LIBOBJS directly, use AC_LIBOBJ (see section `AC_LIBOBJ vs LIBOBJS']) -m4trace:configure.ac:2: -1- m4_pattern_allow([^AS_FLAGS$]) -m4trace:configure.ac:2: -1- m4_pattern_forbid([^_?m4_]) -m4trace:configure.ac:2: -1- m4_pattern_forbid([^dnl$]) -m4trace:configure.ac:2: -1- m4_pattern_forbid([^_?AS_]) -m4trace:configure.ac:2: -1- AC_SUBST([SHELL]) -m4trace:configure.ac:2: -1- AC_SUBST_TRACE([SHELL]) -m4trace:configure.ac:2: -1- m4_pattern_allow([^SHELL$]) -m4trace:configure.ac:2: -1- AC_SUBST([PATH_SEPARATOR]) -m4trace:configure.ac:2: -1- AC_SUBST_TRACE([PATH_SEPARATOR]) -m4trace:configure.ac:2: -1- m4_pattern_allow([^PATH_SEPARATOR$]) -m4trace:configure.ac:2: -1- AC_SUBST([PACKAGE_NAME], [m4_ifdef([AC_PACKAGE_NAME], ['AC_PACKAGE_NAME'])]) -m4trace:configure.ac:2: -1- AC_SUBST_TRACE([PACKAGE_NAME]) -m4trace:configure.ac:2: -1- m4_pattern_allow([^PACKAGE_NAME$]) -m4trace:configure.ac:2: -1- AC_SUBST([PACKAGE_TARNAME], [m4_ifdef([AC_PACKAGE_TARNAME], ['AC_PACKAGE_TARNAME'])]) -m4trace:configure.ac:2: -1- AC_SUBST_TRACE([PACKAGE_TARNAME]) -m4trace:configure.ac:2: -1- m4_pattern_allow([^PACKAGE_TARNAME$]) -m4trace:configure.ac:2: -1- AC_SUBST([PACKAGE_VERSION], [m4_ifdef([AC_PACKAGE_VERSION], ['AC_PACKAGE_VERSION'])]) -m4trace:configure.ac:2: -1- AC_SUBST_TRACE([PACKAGE_VERSION]) -m4trace:configure.ac:2: -1- m4_pattern_allow([^PACKAGE_VERSION$]) -m4trace:configure.ac:2: -1- AC_SUBST([PACKAGE_STRING], [m4_ifdef([AC_PACKAGE_STRING], ['AC_PACKAGE_STRING'])]) -m4trace:configure.ac:2: -1- AC_SUBST_TRACE([PACKAGE_STRING]) -m4trace:configure.ac:2: -1- m4_pattern_allow([^PACKAGE_STRING$]) -m4trace:configure.ac:2: -1- AC_SUBST([PACKAGE_BUGREPORT], [m4_ifdef([AC_PACKAGE_BUGREPORT], ['AC_PACKAGE_BUGREPORT'])]) -m4trace:configure.ac:2: -1- AC_SUBST_TRACE([PACKAGE_BUGREPORT]) -m4trace:configure.ac:2: -1- m4_pattern_allow([^PACKAGE_BUGREPORT$]) -m4trace:configure.ac:2: -1- AC_SUBST([PACKAGE_URL], [m4_ifdef([AC_PACKAGE_URL], ['AC_PACKAGE_URL'])]) -m4trace:configure.ac:2: -1- AC_SUBST_TRACE([PACKAGE_URL]) -m4trace:configure.ac:2: -1- m4_pattern_allow([^PACKAGE_URL$]) -m4trace:configure.ac:2: -1- AC_SUBST([exec_prefix], [NONE]) -m4trace:configure.ac:2: -1- AC_SUBST_TRACE([exec_prefix]) -m4trace:configure.ac:2: -1- m4_pattern_allow([^exec_prefix$]) -m4trace:configure.ac:2: -1- AC_SUBST([prefix], [NONE]) -m4trace:configure.ac:2: -1- AC_SUBST_TRACE([prefix]) -m4trace:configure.ac:2: -1- m4_pattern_allow([^prefix$]) -m4trace:configure.ac:2: -1- AC_SUBST([program_transform_name], [s,x,x,]) -m4trace:configure.ac:2: -1- AC_SUBST_TRACE([program_transform_name]) -m4trace:configure.ac:2: -1- m4_pattern_allow([^program_transform_name$]) -m4trace:configure.ac:2: -1- AC_SUBST([bindir], ['${exec_prefix}/bin']) -m4trace:configure.ac:2: -1- AC_SUBST_TRACE([bindir]) -m4trace:configure.ac:2: -1- m4_pattern_allow([^bindir$]) -m4trace:configure.ac:2: -1- AC_SUBST([sbindir], ['${exec_prefix}/sbin']) -m4trace:configure.ac:2: -1- AC_SUBST_TRACE([sbindir]) -m4trace:configure.ac:2: -1- m4_pattern_allow([^sbindir$]) -m4trace:configure.ac:2: -1- AC_SUBST([libexecdir], ['${exec_prefix}/libexec']) -m4trace:configure.ac:2: -1- AC_SUBST_TRACE([libexecdir]) -m4trace:configure.ac:2: -1- m4_pattern_allow([^libexecdir$]) -m4trace:configure.ac:2: -1- AC_SUBST([datarootdir], ['${prefix}/share']) -m4trace:configure.ac:2: -1- AC_SUBST_TRACE([datarootdir]) -m4trace:configure.ac:2: -1- m4_pattern_allow([^datarootdir$]) -m4trace:configure.ac:2: -1- AC_SUBST([datadir], ['${datarootdir}']) -m4trace:configure.ac:2: -1- AC_SUBST_TRACE([datadir]) -m4trace:configure.ac:2: -1- m4_pattern_allow([^datadir$]) -m4trace:configure.ac:2: -1- AC_SUBST([sysconfdir], ['${prefix}/etc']) -m4trace:configure.ac:2: -1- AC_SUBST_TRACE([sysconfdir]) -m4trace:configure.ac:2: -1- m4_pattern_allow([^sysconfdir$]) -m4trace:configure.ac:2: -1- AC_SUBST([sharedstatedir], ['${prefix}/com']) -m4trace:configure.ac:2: -1- AC_SUBST_TRACE([sharedstatedir]) -m4trace:configure.ac:2: -1- m4_pattern_allow([^sharedstatedir$]) -m4trace:configure.ac:2: -1- AC_SUBST([localstatedir], ['${prefix}/var']) -m4trace:configure.ac:2: -1- AC_SUBST_TRACE([localstatedir]) -m4trace:configure.ac:2: -1- m4_pattern_allow([^localstatedir$]) -m4trace:configure.ac:2: -1- AC_SUBST([includedir], ['${prefix}/include']) -m4trace:configure.ac:2: -1- AC_SUBST_TRACE([includedir]) -m4trace:configure.ac:2: -1- m4_pattern_allow([^includedir$]) -m4trace:configure.ac:2: -1- AC_SUBST([oldincludedir], ['/usr/include']) -m4trace:configure.ac:2: -1- AC_SUBST_TRACE([oldincludedir]) -m4trace:configure.ac:2: -1- m4_pattern_allow([^oldincludedir$]) -m4trace:configure.ac:2: -1- AC_SUBST([docdir], [m4_ifset([AC_PACKAGE_TARNAME], - ['${datarootdir}/doc/${PACKAGE_TARNAME}'], - ['${datarootdir}/doc/${PACKAGE}'])]) -m4trace:configure.ac:2: -1- AC_SUBST_TRACE([docdir]) -m4trace:configure.ac:2: -1- m4_pattern_allow([^docdir$]) -m4trace:configure.ac:2: -1- AC_SUBST([infodir], ['${datarootdir}/info']) -m4trace:configure.ac:2: -1- AC_SUBST_TRACE([infodir]) -m4trace:configure.ac:2: -1- m4_pattern_allow([^infodir$]) -m4trace:configure.ac:2: -1- AC_SUBST([htmldir], ['${docdir}']) -m4trace:configure.ac:2: -1- AC_SUBST_TRACE([htmldir]) -m4trace:configure.ac:2: -1- m4_pattern_allow([^htmldir$]) -m4trace:configure.ac:2: -1- AC_SUBST([dvidir], ['${docdir}']) -m4trace:configure.ac:2: -1- AC_SUBST_TRACE([dvidir]) -m4trace:configure.ac:2: -1- m4_pattern_allow([^dvidir$]) -m4trace:configure.ac:2: -1- AC_SUBST([pdfdir], ['${docdir}']) -m4trace:configure.ac:2: -1- AC_SUBST_TRACE([pdfdir]) -m4trace:configure.ac:2: -1- m4_pattern_allow([^pdfdir$]) -m4trace:configure.ac:2: -1- AC_SUBST([psdir], ['${docdir}']) -m4trace:configure.ac:2: -1- AC_SUBST_TRACE([psdir]) -m4trace:configure.ac:2: -1- m4_pattern_allow([^psdir$]) -m4trace:configure.ac:2: -1- AC_SUBST([libdir], ['${exec_prefix}/lib']) -m4trace:configure.ac:2: -1- AC_SUBST_TRACE([libdir]) -m4trace:configure.ac:2: -1- m4_pattern_allow([^libdir$]) -m4trace:configure.ac:2: -1- AC_SUBST([localedir], ['${datarootdir}/locale']) -m4trace:configure.ac:2: -1- AC_SUBST_TRACE([localedir]) -m4trace:configure.ac:2: -1- m4_pattern_allow([^localedir$]) -m4trace:configure.ac:2: -1- AC_SUBST([mandir], ['${datarootdir}/man']) -m4trace:configure.ac:2: -1- AC_SUBST_TRACE([mandir]) -m4trace:configure.ac:2: -1- m4_pattern_allow([^mandir$]) -m4trace:configure.ac:2: -1- AC_DEFINE_TRACE_LITERAL([PACKAGE_NAME]) -m4trace:configure.ac:2: -1- m4_pattern_allow([^PACKAGE_NAME$]) -m4trace:configure.ac:2: -1- AH_OUTPUT([PACKAGE_NAME], [/* Define to the full name of this package. */ -@%:@undef PACKAGE_NAME]) -m4trace:configure.ac:2: -1- AC_DEFINE_TRACE_LITERAL([PACKAGE_TARNAME]) -m4trace:configure.ac:2: -1- m4_pattern_allow([^PACKAGE_TARNAME$]) -m4trace:configure.ac:2: -1- AH_OUTPUT([PACKAGE_TARNAME], [/* Define to the one symbol short name of this package. */ -@%:@undef PACKAGE_TARNAME]) -m4trace:configure.ac:2: -1- AC_DEFINE_TRACE_LITERAL([PACKAGE_VERSION]) -m4trace:configure.ac:2: -1- m4_pattern_allow([^PACKAGE_VERSION$]) -m4trace:configure.ac:2: -1- AH_OUTPUT([PACKAGE_VERSION], [/* Define to the version of this package. */ -@%:@undef PACKAGE_VERSION]) -m4trace:configure.ac:2: -1- AC_DEFINE_TRACE_LITERAL([PACKAGE_STRING]) -m4trace:configure.ac:2: -1- m4_pattern_allow([^PACKAGE_STRING$]) -m4trace:configure.ac:2: -1- AH_OUTPUT([PACKAGE_STRING], [/* Define to the full name and version of this package. */ -@%:@undef PACKAGE_STRING]) -m4trace:configure.ac:2: -1- AC_DEFINE_TRACE_LITERAL([PACKAGE_BUGREPORT]) -m4trace:configure.ac:2: -1- m4_pattern_allow([^PACKAGE_BUGREPORT$]) -m4trace:configure.ac:2: -1- AH_OUTPUT([PACKAGE_BUGREPORT], [/* Define to the address where bug reports for this package should be sent. */ -@%:@undef PACKAGE_BUGREPORT]) -m4trace:configure.ac:2: -1- AC_DEFINE_TRACE_LITERAL([PACKAGE_URL]) -m4trace:configure.ac:2: -1- m4_pattern_allow([^PACKAGE_URL$]) -m4trace:configure.ac:2: -1- AH_OUTPUT([PACKAGE_URL], [/* Define to the home page for this package. */ -@%:@undef PACKAGE_URL]) -m4trace:configure.ac:2: -1- AC_SUBST([DEFS]) -m4trace:configure.ac:2: -1- AC_SUBST_TRACE([DEFS]) -m4trace:configure.ac:2: -1- m4_pattern_allow([^DEFS$]) -m4trace:configure.ac:2: -1- AC_SUBST([ECHO_C]) -m4trace:configure.ac:2: -1- AC_SUBST_TRACE([ECHO_C]) -m4trace:configure.ac:2: -1- m4_pattern_allow([^ECHO_C$]) -m4trace:configure.ac:2: -1- AC_SUBST([ECHO_N]) -m4trace:configure.ac:2: -1- AC_SUBST_TRACE([ECHO_N]) -m4trace:configure.ac:2: -1- m4_pattern_allow([^ECHO_N$]) -m4trace:configure.ac:2: -1- AC_SUBST([ECHO_T]) -m4trace:configure.ac:2: -1- AC_SUBST_TRACE([ECHO_T]) -m4trace:configure.ac:2: -1- m4_pattern_allow([^ECHO_T$]) -m4trace:configure.ac:2: -1- AC_SUBST([LIBS]) -m4trace:configure.ac:2: -1- AC_SUBST_TRACE([LIBS]) -m4trace:configure.ac:2: -1- m4_pattern_allow([^LIBS$]) -m4trace:configure.ac:2: -1- AC_SUBST([build_alias]) -m4trace:configure.ac:2: -1- AC_SUBST_TRACE([build_alias]) -m4trace:configure.ac:2: -1- m4_pattern_allow([^build_alias$]) -m4trace:configure.ac:2: -1- AC_SUBST([host_alias]) -m4trace:configure.ac:2: -1- AC_SUBST_TRACE([host_alias]) -m4trace:configure.ac:2: -1- m4_pattern_allow([^host_alias$]) -m4trace:configure.ac:2: -1- AC_SUBST([target_alias]) -m4trace:configure.ac:2: -1- AC_SUBST_TRACE([target_alias]) -m4trace:configure.ac:2: -1- m4_pattern_allow([^target_alias$]) -m4trace:configure.ac:3: -1- AM_INIT_AUTOMAKE([silent-rules]) -m4trace:configure.ac:3: -1- m4_pattern_allow([^AM_[A-Z]+FLAGS$]) -m4trace:configure.ac:3: -1- AM_AUTOMAKE_VERSION([1.14.1]) -m4trace:configure.ac:3: -1- AC_REQUIRE_AUX_FILE([install-sh]) -m4trace:configure.ac:3: -1- AC_SUBST([INSTALL_PROGRAM]) -m4trace:configure.ac:3: -1- AC_SUBST_TRACE([INSTALL_PROGRAM]) -m4trace:configure.ac:3: -1- m4_pattern_allow([^INSTALL_PROGRAM$]) -m4trace:configure.ac:3: -1- AC_SUBST([INSTALL_SCRIPT]) -m4trace:configure.ac:3: -1- AC_SUBST_TRACE([INSTALL_SCRIPT]) -m4trace:configure.ac:3: -1- m4_pattern_allow([^INSTALL_SCRIPT$]) -m4trace:configure.ac:3: -1- AC_SUBST([INSTALL_DATA]) -m4trace:configure.ac:3: -1- AC_SUBST_TRACE([INSTALL_DATA]) -m4trace:configure.ac:3: -1- m4_pattern_allow([^INSTALL_DATA$]) -m4trace:configure.ac:3: -1- AC_SUBST([am__isrc], [' -I$(srcdir)']) -m4trace:configure.ac:3: -1- AC_SUBST_TRACE([am__isrc]) -m4trace:configure.ac:3: -1- m4_pattern_allow([^am__isrc$]) -m4trace:configure.ac:3: -1- _AM_SUBST_NOTMAKE([am__isrc]) -m4trace:configure.ac:3: -1- AC_SUBST([CYGPATH_W]) -m4trace:configure.ac:3: -1- AC_SUBST_TRACE([CYGPATH_W]) -m4trace:configure.ac:3: -1- m4_pattern_allow([^CYGPATH_W$]) -m4trace:configure.ac:3: -1- AC_SUBST([PACKAGE], ['AC_PACKAGE_TARNAME']) -m4trace:configure.ac:3: -1- AC_SUBST_TRACE([PACKAGE]) -m4trace:configure.ac:3: -1- m4_pattern_allow([^PACKAGE$]) -m4trace:configure.ac:3: -1- AC_SUBST([VERSION], ['AC_PACKAGE_VERSION']) -m4trace:configure.ac:3: -1- AC_SUBST_TRACE([VERSION]) -m4trace:configure.ac:3: -1- m4_pattern_allow([^VERSION$]) -m4trace:configure.ac:3: -1- AC_DEFINE_TRACE_LITERAL([PACKAGE]) -m4trace:configure.ac:3: -1- m4_pattern_allow([^PACKAGE$]) -m4trace:configure.ac:3: -1- AH_OUTPUT([PACKAGE], [/* Name of package */ -@%:@undef PACKAGE]) -m4trace:configure.ac:3: -1- AC_DEFINE_TRACE_LITERAL([VERSION]) -m4trace:configure.ac:3: -1- m4_pattern_allow([^VERSION$]) -m4trace:configure.ac:3: -1- AH_OUTPUT([VERSION], [/* Version number of package */ -@%:@undef VERSION]) -m4trace:configure.ac:3: -1- AC_REQUIRE_AUX_FILE([missing]) -m4trace:configure.ac:3: -1- AC_SUBST([ACLOCAL]) -m4trace:configure.ac:3: -1- AC_SUBST_TRACE([ACLOCAL]) -m4trace:configure.ac:3: -1- m4_pattern_allow([^ACLOCAL$]) -m4trace:configure.ac:3: -1- AC_SUBST([AUTOCONF]) -m4trace:configure.ac:3: -1- AC_SUBST_TRACE([AUTOCONF]) -m4trace:configure.ac:3: -1- m4_pattern_allow([^AUTOCONF$]) -m4trace:configure.ac:3: -1- AC_SUBST([AUTOMAKE]) -m4trace:configure.ac:3: -1- AC_SUBST_TRACE([AUTOMAKE]) -m4trace:configure.ac:3: -1- m4_pattern_allow([^AUTOMAKE$]) -m4trace:configure.ac:3: -1- AC_SUBST([AUTOHEADER]) -m4trace:configure.ac:3: -1- AC_SUBST_TRACE([AUTOHEADER]) -m4trace:configure.ac:3: -1- m4_pattern_allow([^AUTOHEADER$]) -m4trace:configure.ac:3: -1- AC_SUBST([MAKEINFO]) -m4trace:configure.ac:3: -1- AC_SUBST_TRACE([MAKEINFO]) -m4trace:configure.ac:3: -1- m4_pattern_allow([^MAKEINFO$]) -m4trace:configure.ac:3: -1- AC_SUBST([install_sh]) -m4trace:configure.ac:3: -1- AC_SUBST_TRACE([install_sh]) -m4trace:configure.ac:3: -1- m4_pattern_allow([^install_sh$]) -m4trace:configure.ac:3: -1- AC_SUBST([STRIP]) -m4trace:configure.ac:3: -1- AC_SUBST_TRACE([STRIP]) -m4trace:configure.ac:3: -1- m4_pattern_allow([^STRIP$]) -m4trace:configure.ac:3: -1- AC_SUBST([INSTALL_STRIP_PROGRAM]) -m4trace:configure.ac:3: -1- AC_SUBST_TRACE([INSTALL_STRIP_PROGRAM]) -m4trace:configure.ac:3: -1- m4_pattern_allow([^INSTALL_STRIP_PROGRAM$]) -m4trace:configure.ac:3: -1- AC_REQUIRE_AUX_FILE([install-sh]) -m4trace:configure.ac:3: -1- AC_SUBST([MKDIR_P]) -m4trace:configure.ac:3: -1- AC_SUBST_TRACE([MKDIR_P]) -m4trace:configure.ac:3: -1- m4_pattern_allow([^MKDIR_P$]) -m4trace:configure.ac:3: -1- AC_SUBST([mkdir_p], ['$(MKDIR_P)']) -m4trace:configure.ac:3: -1- AC_SUBST_TRACE([mkdir_p]) -m4trace:configure.ac:3: -1- m4_pattern_allow([^mkdir_p$]) -m4trace:configure.ac:3: -1- AC_SUBST([AWK]) -m4trace:configure.ac:3: -1- AC_SUBST_TRACE([AWK]) -m4trace:configure.ac:3: -1- m4_pattern_allow([^AWK$]) -m4trace:configure.ac:3: -1- AC_SUBST([SET_MAKE]) -m4trace:configure.ac:3: -1- AC_SUBST_TRACE([SET_MAKE]) -m4trace:configure.ac:3: -1- m4_pattern_allow([^SET_MAKE$]) -m4trace:configure.ac:3: -1- AC_SUBST([am__leading_dot]) -m4trace:configure.ac:3: -1- AC_SUBST_TRACE([am__leading_dot]) -m4trace:configure.ac:3: -1- m4_pattern_allow([^am__leading_dot$]) -m4trace:configure.ac:3: -1- AC_SUBST([AMTAR], ['$${TAR-tar}']) -m4trace:configure.ac:3: -1- AC_SUBST_TRACE([AMTAR]) -m4trace:configure.ac:3: -1- m4_pattern_allow([^AMTAR$]) -m4trace:configure.ac:3: -1- AC_SUBST([am__tar]) -m4trace:configure.ac:3: -1- AC_SUBST_TRACE([am__tar]) -m4trace:configure.ac:3: -1- m4_pattern_allow([^am__tar$]) -m4trace:configure.ac:3: -1- AC_SUBST([am__untar]) -m4trace:configure.ac:3: -1- AC_SUBST_TRACE([am__untar]) -m4trace:configure.ac:3: -1- m4_pattern_allow([^am__untar$]) -m4trace:configure.ac:3: -1- AM_SILENT_RULES -m4trace:configure.ac:3: -1- AC_SUBST([AM_V]) -m4trace:configure.ac:3: -1- AC_SUBST_TRACE([AM_V]) -m4trace:configure.ac:3: -1- m4_pattern_allow([^AM_V$]) -m4trace:configure.ac:3: -1- _AM_SUBST_NOTMAKE([AM_V]) -m4trace:configure.ac:3: -1- AC_SUBST([AM_DEFAULT_V]) -m4trace:configure.ac:3: -1- AC_SUBST_TRACE([AM_DEFAULT_V]) -m4trace:configure.ac:3: -1- m4_pattern_allow([^AM_DEFAULT_V$]) -m4trace:configure.ac:3: -1- _AM_SUBST_NOTMAKE([AM_DEFAULT_V]) -m4trace:configure.ac:3: -1- AC_SUBST([AM_DEFAULT_VERBOSITY]) -m4trace:configure.ac:3: -1- AC_SUBST_TRACE([AM_DEFAULT_VERBOSITY]) -m4trace:configure.ac:3: -1- m4_pattern_allow([^AM_DEFAULT_VERBOSITY$]) -m4trace:configure.ac:3: -1- AC_SUBST([AM_BACKSLASH]) -m4trace:configure.ac:3: -1- AC_SUBST_TRACE([AM_BACKSLASH]) -m4trace:configure.ac:3: -1- m4_pattern_allow([^AM_BACKSLASH$]) -m4trace:configure.ac:3: -1- _AM_SUBST_NOTMAKE([AM_BACKSLASH]) -m4trace:configure.ac:5: -1- AC_CONFIG_HEADERS([config.h]) -m4trace:configure.ac:8: -1- AC_SUBST([CC]) -m4trace:configure.ac:8: -1- AC_SUBST_TRACE([CC]) -m4trace:configure.ac:8: -1- m4_pattern_allow([^CC$]) -m4trace:configure.ac:8: -1- AC_SUBST([CFLAGS]) -m4trace:configure.ac:8: -1- AC_SUBST_TRACE([CFLAGS]) -m4trace:configure.ac:8: -1- m4_pattern_allow([^CFLAGS$]) -m4trace:configure.ac:8: -1- AC_SUBST([LDFLAGS]) -m4trace:configure.ac:8: -1- AC_SUBST_TRACE([LDFLAGS]) -m4trace:configure.ac:8: -1- m4_pattern_allow([^LDFLAGS$]) -m4trace:configure.ac:8: -1- AC_SUBST([LIBS]) -m4trace:configure.ac:8: -1- AC_SUBST_TRACE([LIBS]) -m4trace:configure.ac:8: -1- m4_pattern_allow([^LIBS$]) -m4trace:configure.ac:8: -1- AC_SUBST([CPPFLAGS]) -m4trace:configure.ac:8: -1- AC_SUBST_TRACE([CPPFLAGS]) -m4trace:configure.ac:8: -1- m4_pattern_allow([^CPPFLAGS$]) -m4trace:configure.ac:8: -1- AC_SUBST([CC]) -m4trace:configure.ac:8: -1- AC_SUBST_TRACE([CC]) -m4trace:configure.ac:8: -1- m4_pattern_allow([^CC$]) -m4trace:configure.ac:8: -1- AC_SUBST([CC]) -m4trace:configure.ac:8: -1- AC_SUBST_TRACE([CC]) -m4trace:configure.ac:8: -1- m4_pattern_allow([^CC$]) -m4trace:configure.ac:8: -1- AC_SUBST([CC]) -m4trace:configure.ac:8: -1- AC_SUBST_TRACE([CC]) -m4trace:configure.ac:8: -1- m4_pattern_allow([^CC$]) -m4trace:configure.ac:8: -1- AC_SUBST([CC]) -m4trace:configure.ac:8: -1- AC_SUBST_TRACE([CC]) -m4trace:configure.ac:8: -1- m4_pattern_allow([^CC$]) -m4trace:configure.ac:8: -1- AC_SUBST([ac_ct_CC]) -m4trace:configure.ac:8: -1- AC_SUBST_TRACE([ac_ct_CC]) -m4trace:configure.ac:8: -1- m4_pattern_allow([^ac_ct_CC$]) -m4trace:configure.ac:8: -1- AC_SUBST([EXEEXT], [$ac_cv_exeext]) -m4trace:configure.ac:8: -1- AC_SUBST_TRACE([EXEEXT]) -m4trace:configure.ac:8: -1- m4_pattern_allow([^EXEEXT$]) -m4trace:configure.ac:8: -1- AC_SUBST([OBJEXT], [$ac_cv_objext]) -m4trace:configure.ac:8: -1- AC_SUBST_TRACE([OBJEXT]) -m4trace:configure.ac:8: -1- m4_pattern_allow([^OBJEXT$]) -m4trace:configure.ac:8: -1- AC_REQUIRE_AUX_FILE([compile]) -m4trace:configure.ac:8: -1- AC_SUBST([DEPDIR], ["${am__leading_dot}deps"]) -m4trace:configure.ac:8: -1- AC_SUBST_TRACE([DEPDIR]) -m4trace:configure.ac:8: -1- m4_pattern_allow([^DEPDIR$]) -m4trace:configure.ac:8: -1- AC_SUBST([am__include]) -m4trace:configure.ac:8: -1- AC_SUBST_TRACE([am__include]) -m4trace:configure.ac:8: -1- m4_pattern_allow([^am__include$]) -m4trace:configure.ac:8: -1- AC_SUBST([am__quote]) -m4trace:configure.ac:8: -1- AC_SUBST_TRACE([am__quote]) -m4trace:configure.ac:8: -1- m4_pattern_allow([^am__quote$]) -m4trace:configure.ac:8: -1- AM_CONDITIONAL([AMDEP], [test "x$enable_dependency_tracking" != xno]) -m4trace:configure.ac:8: -1- AC_SUBST([AMDEP_TRUE]) -m4trace:configure.ac:8: -1- AC_SUBST_TRACE([AMDEP_TRUE]) -m4trace:configure.ac:8: -1- m4_pattern_allow([^AMDEP_TRUE$]) -m4trace:configure.ac:8: -1- AC_SUBST([AMDEP_FALSE]) -m4trace:configure.ac:8: -1- AC_SUBST_TRACE([AMDEP_FALSE]) -m4trace:configure.ac:8: -1- m4_pattern_allow([^AMDEP_FALSE$]) -m4trace:configure.ac:8: -1- _AM_SUBST_NOTMAKE([AMDEP_TRUE]) -m4trace:configure.ac:8: -1- _AM_SUBST_NOTMAKE([AMDEP_FALSE]) -m4trace:configure.ac:8: -1- AC_SUBST([AMDEPBACKSLASH]) -m4trace:configure.ac:8: -1- AC_SUBST_TRACE([AMDEPBACKSLASH]) -m4trace:configure.ac:8: -1- m4_pattern_allow([^AMDEPBACKSLASH$]) -m4trace:configure.ac:8: -1- _AM_SUBST_NOTMAKE([AMDEPBACKSLASH]) -m4trace:configure.ac:8: -1- AC_SUBST([am__nodep]) -m4trace:configure.ac:8: -1- AC_SUBST_TRACE([am__nodep]) -m4trace:configure.ac:8: -1- m4_pattern_allow([^am__nodep$]) -m4trace:configure.ac:8: -1- _AM_SUBST_NOTMAKE([am__nodep]) -m4trace:configure.ac:8: -1- AC_SUBST([CCDEPMODE], [depmode=$am_cv_CC_dependencies_compiler_type]) -m4trace:configure.ac:8: -1- AC_SUBST_TRACE([CCDEPMODE]) -m4trace:configure.ac:8: -1- m4_pattern_allow([^CCDEPMODE$]) -m4trace:configure.ac:8: -1- AM_CONDITIONAL([am__fastdepCC], [ - test "x$enable_dependency_tracking" != xno \ - && test "$am_cv_CC_dependencies_compiler_type" = gcc3]) -m4trace:configure.ac:8: -1- AC_SUBST([am__fastdepCC_TRUE]) -m4trace:configure.ac:8: -1- AC_SUBST_TRACE([am__fastdepCC_TRUE]) -m4trace:configure.ac:8: -1- m4_pattern_allow([^am__fastdepCC_TRUE$]) -m4trace:configure.ac:8: -1- AC_SUBST([am__fastdepCC_FALSE]) -m4trace:configure.ac:8: -1- AC_SUBST_TRACE([am__fastdepCC_FALSE]) -m4trace:configure.ac:8: -1- m4_pattern_allow([^am__fastdepCC_FALSE$]) -m4trace:configure.ac:8: -1- _AM_SUBST_NOTMAKE([am__fastdepCC_TRUE]) -m4trace:configure.ac:8: -1- _AM_SUBST_NOTMAKE([am__fastdepCC_FALSE]) -m4trace:configure.ac:10: -1- AM_PROG_CC_C_O -m4trace:configure.ac:20: -1- AC_CONFIG_FILES([Makefile]) -m4trace:configure.ac:21: -1- AC_SUBST([LIB@&t@OBJS], [$ac_libobjs]) -m4trace:configure.ac:21: -1- AC_SUBST_TRACE([LIB@&t@OBJS]) -m4trace:configure.ac:21: -1- m4_pattern_allow([^LIB@&t@OBJS$]) -m4trace:configure.ac:21: -1- AC_SUBST([LTLIBOBJS], [$ac_ltlibobjs]) -m4trace:configure.ac:21: -1- AC_SUBST_TRACE([LTLIBOBJS]) -m4trace:configure.ac:21: -1- m4_pattern_allow([^LTLIBOBJS$]) -m4trace:configure.ac:21: -1- AM_CONDITIONAL([am__EXEEXT], [test -n "$EXEEXT"]) -m4trace:configure.ac:21: -1- AC_SUBST([am__EXEEXT_TRUE]) -m4trace:configure.ac:21: -1- AC_SUBST_TRACE([am__EXEEXT_TRUE]) -m4trace:configure.ac:21: -1- m4_pattern_allow([^am__EXEEXT_TRUE$]) -m4trace:configure.ac:21: -1- AC_SUBST([am__EXEEXT_FALSE]) -m4trace:configure.ac:21: -1- AC_SUBST_TRACE([am__EXEEXT_FALSE]) -m4trace:configure.ac:21: -1- m4_pattern_allow([^am__EXEEXT_FALSE$]) -m4trace:configure.ac:21: -1- _AM_SUBST_NOTMAKE([am__EXEEXT_TRUE]) -m4trace:configure.ac:21: -1- _AM_SUBST_NOTMAKE([am__EXEEXT_FALSE]) -m4trace:configure.ac:21: -1- AC_SUBST_TRACE([top_builddir]) -m4trace:configure.ac:21: -1- AC_SUBST_TRACE([top_build_prefix]) -m4trace:configure.ac:21: -1- AC_SUBST_TRACE([srcdir]) -m4trace:configure.ac:21: -1- AC_SUBST_TRACE([abs_srcdir]) -m4trace:configure.ac:21: -1- AC_SUBST_TRACE([top_srcdir]) -m4trace:configure.ac:21: -1- AC_SUBST_TRACE([abs_top_srcdir]) -m4trace:configure.ac:21: -1- AC_SUBST_TRACE([builddir]) -m4trace:configure.ac:21: -1- AC_SUBST_TRACE([abs_builddir]) -m4trace:configure.ac:21: -1- AC_SUBST_TRACE([abs_top_builddir]) -m4trace:configure.ac:21: -1- AC_SUBST_TRACE([INSTALL]) -m4trace:configure.ac:21: -1- AC_SUBST_TRACE([MKDIR_P]) diff --git a/distribution/yocto-advanced/poky/meta-mini/recipes-hello/autohello/files/autohello/compile b/distribution/yocto-advanced/poky/meta-mini/recipes-hello/autohello/files/autohello/compile deleted file mode 120000 index d3164c8..0000000 --- a/distribution/yocto-advanced/poky/meta-mini/recipes-hello/autohello/files/autohello/compile +++ /dev/null @@ -1 +0,0 @@ -/usr/share/automake-1.14/compile \ No newline at end of file diff --git a/distribution/yocto-advanced/poky/meta-mini/recipes-hello/autohello/files/autohello/config.h b/distribution/yocto-advanced/poky/meta-mini/recipes-hello/autohello/files/autohello/config.h deleted file mode 100644 index 8393208..0000000 --- a/distribution/yocto-advanced/poky/meta-mini/recipes-hello/autohello/files/autohello/config.h +++ /dev/null @@ -1,26 +0,0 @@ -/* config.h. Generated from config.h.in by configure. */ -/* config.h.in. Generated from configure.ac by autoheader. */ - -/* Name of package */ -#define PACKAGE "autohello" - -/* Define to the address where bug reports for this package should be sent. */ -#define PACKAGE_BUGREPORT "maunt@linutronix.de" - -/* Define to the full name of this package. */ -#define PACKAGE_NAME "autohello" - -/* Define to the full name and version of this package. */ -#define PACKAGE_STRING "autohello 1.1" - -/* Define to the one symbol short name of this package. */ -#define PACKAGE_TARNAME "autohello" - -/* Define to the home page for this package. */ -#define PACKAGE_URL "" - -/* Define to the version of this package. */ -#define PACKAGE_VERSION "1.1" - -/* Version number of package */ -#define VERSION "1.1" diff --git a/distribution/yocto-advanced/poky/meta-mini/recipes-hello/autohello/files/autohello/config.h.in b/distribution/yocto-advanced/poky/meta-mini/recipes-hello/autohello/files/autohello/config.h.in deleted file mode 100644 index dd3b02c..0000000 --- a/distribution/yocto-advanced/poky/meta-mini/recipes-hello/autohello/files/autohello/config.h.in +++ /dev/null @@ -1,25 +0,0 @@ -/* config.h.in. Generated from configure.ac by autoheader. */ - -/* Name of package */ -#undef PACKAGE - -/* Define to the address where bug reports for this package should be sent. */ -#undef PACKAGE_BUGREPORT - -/* Define to the full name of this package. */ -#undef PACKAGE_NAME - -/* Define to the full name and version of this package. */ -#undef PACKAGE_STRING - -/* Define to the one symbol short name of this package. */ -#undef PACKAGE_TARNAME - -/* Define to the home page for this package. */ -#undef PACKAGE_URL - -/* Define to the version of this package. */ -#undef PACKAGE_VERSION - -/* Version number of package */ -#undef VERSION diff --git a/distribution/yocto-advanced/poky/meta-mini/recipes-hello/autohello/files/autohello/config.status b/distribution/yocto-advanced/poky/meta-mini/recipes-hello/autohello/files/autohello/config.status deleted file mode 100755 index 8efae30..0000000 --- a/distribution/yocto-advanced/poky/meta-mini/recipes-hello/autohello/files/autohello/config.status +++ /dev/null @@ -1,1173 +0,0 @@ -#! /bin/bash -# Generated by configure. -# Run this file to recreate the current configuration. -# Compiler output produced by configure, useful for debugging -# configure, is in config.log if it exists. - -debug=false -ac_cs_recheck=false -ac_cs_silent=false - -SHELL=${CONFIG_SHELL-/bin/bash} -export SHELL -## -------------------- ## -## M4sh Initialization. ## -## -------------------- ## - -# Be more Bourne compatible -DUALCASE=1; export DUALCASE # for MKS sh -if test -n "${ZSH_VERSION+set}" && (emulate sh) >/dev/null 2>&1; then : - emulate sh - NULLCMD=: - # Pre-4.2 versions of Zsh do word splitting on ${1+"$@"}, which - # is contrary to our usage. Disable this feature. - alias -g '${1+"$@"}'='"$@"' - setopt NO_GLOB_SUBST -else - case `(set -o) 2>/dev/null` in #( - *posix*) : - set -o posix ;; #( - *) : - ;; -esac -fi - - -as_nl=' -' -export as_nl -# Printing a long string crashes Solaris 7 /usr/bin/printf. -as_echo='\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\' -as_echo=$as_echo$as_echo$as_echo$as_echo$as_echo -as_echo=$as_echo$as_echo$as_echo$as_echo$as_echo$as_echo -# Prefer a ksh shell builtin over an external printf program on Solaris, -# but without wasting forks for bash or zsh. -if test -z "$BASH_VERSION$ZSH_VERSION" \ - && (test "X`print -r -- $as_echo`" = "X$as_echo") 2>/dev/null; then - as_echo='print -r --' - as_echo_n='print -rn --' -elif (test "X`printf %s $as_echo`" = "X$as_echo") 2>/dev/null; then - as_echo='printf %s\n' - as_echo_n='printf %s' -else - if test "X`(/usr/ucb/echo -n -n $as_echo) 2>/dev/null`" = "X-n $as_echo"; then - as_echo_body='eval /usr/ucb/echo -n "$1$as_nl"' - as_echo_n='/usr/ucb/echo -n' - else - as_echo_body='eval expr "X$1" : "X\\(.*\\)"' - as_echo_n_body='eval - arg=$1; - case $arg in #( - *"$as_nl"*) - expr "X$arg" : "X\\(.*\\)$as_nl"; - arg=`expr "X$arg" : ".*$as_nl\\(.*\\)"`;; - esac; - expr "X$arg" : "X\\(.*\\)" | tr -d "$as_nl" - ' - export as_echo_n_body - as_echo_n='sh -c $as_echo_n_body as_echo' - fi - export as_echo_body - as_echo='sh -c $as_echo_body as_echo' -fi - -# The user is always right. -if test "${PATH_SEPARATOR+set}" != set; then - PATH_SEPARATOR=: - (PATH='/bin;/bin'; FPATH=$PATH; sh -c :) >/dev/null 2>&1 && { - (PATH='/bin:/bin'; FPATH=$PATH; sh -c :) >/dev/null 2>&1 || - PATH_SEPARATOR=';' - } -fi - - -# IFS -# We need space, tab and new line, in precisely that order. Quoting is -# there to prevent editors from complaining about space-tab. -# (If _AS_PATH_WALK were called with IFS unset, it would disable word -# splitting by setting IFS to empty value.) -IFS=" "" $as_nl" - -# Find who we are. Look in the path if we contain no directory separator. -as_myself= -case $0 in #(( - *[\\/]* ) as_myself=$0 ;; - *) as_save_IFS=$IFS; IFS=$PATH_SEPARATOR -for as_dir in $PATH -do - IFS=$as_save_IFS - test -z "$as_dir" && as_dir=. - test -r "$as_dir/$0" && as_myself=$as_dir/$0 && break - done -IFS=$as_save_IFS - - ;; -esac -# We did not find ourselves, most probably we were run as `sh COMMAND' -# in which case we are not to be found in the path. -if test "x$as_myself" = x; then - as_myself=$0 -fi -if test ! -f "$as_myself"; then - $as_echo "$as_myself: error: cannot find myself; rerun with an absolute file name" >&2 - exit 1 -fi - -# Unset variables that we do not need and which cause bugs (e.g. in -# pre-3.0 UWIN ksh). But do not cause bugs in bash 2.01; the "|| exit 1" -# suppresses any "Segmentation fault" message there. '((' could -# trigger a bug in pdksh 5.2.14. -for as_var in BASH_ENV ENV MAIL MAILPATH -do eval test x\${$as_var+set} = xset \ - && ( (unset $as_var) || exit 1) >/dev/null 2>&1 && unset $as_var || : -done -PS1='$ ' -PS2='> ' -PS4='+ ' - -# NLS nuisances. -LC_ALL=C -export LC_ALL -LANGUAGE=C -export LANGUAGE - -# CDPATH. -(unset CDPATH) >/dev/null 2>&1 && unset CDPATH - - -# as_fn_error STATUS ERROR [LINENO LOG_FD] -# ---------------------------------------- -# Output "`basename $0`: error: ERROR" to stderr. If LINENO and LOG_FD are -# provided, also output the error to LOG_FD, referencing LINENO. Then exit the -# script with STATUS, using 1 if that was 0. -as_fn_error () -{ - as_status=$1; test $as_status -eq 0 && as_status=1 - if test "$4"; then - as_lineno=${as_lineno-"$3"} as_lineno_stack=as_lineno_stack=$as_lineno_stack - $as_echo "$as_me:${as_lineno-$LINENO}: error: $2" >&$4 - fi - $as_echo "$as_me: error: $2" >&2 - as_fn_exit $as_status -} # as_fn_error - - -# as_fn_set_status STATUS -# ----------------------- -# Set $? to STATUS, without forking. -as_fn_set_status () -{ - return $1 -} # as_fn_set_status - -# as_fn_exit STATUS -# ----------------- -# Exit the shell with STATUS, even in a "trap 0" or "set -e" context. -as_fn_exit () -{ - set +e - as_fn_set_status $1 - exit $1 -} # as_fn_exit - -# as_fn_unset VAR -# --------------- -# Portably unset VAR. -as_fn_unset () -{ - { eval $1=; unset $1;} -} -as_unset=as_fn_unset -# as_fn_append VAR VALUE -# ---------------------- -# Append the text in VALUE to the end of the definition contained in VAR. Take -# advantage of any shell optimizations that allow amortized linear growth over -# repeated appends, instead of the typical quadratic growth present in naive -# implementations. -if (eval "as_var=1; as_var+=2; test x\$as_var = x12") 2>/dev/null; then : - eval 'as_fn_append () - { - eval $1+=\$2 - }' -else - as_fn_append () - { - eval $1=\$$1\$2 - } -fi # as_fn_append - -# as_fn_arith ARG... -# ------------------ -# Perform arithmetic evaluation on the ARGs, and store the result in the -# global $as_val. Take advantage of shells that can avoid forks. The arguments -# must be portable across $(()) and expr. -if (eval "test \$(( 1 + 1 )) = 2") 2>/dev/null; then : - eval 'as_fn_arith () - { - as_val=$(( $* )) - }' -else - as_fn_arith () - { - as_val=`expr "$@" || test $? -eq 1` - } -fi # as_fn_arith - - -if expr a : '\(a\)' >/dev/null 2>&1 && - test "X`expr 00001 : '.*\(...\)'`" = X001; then - as_expr=expr -else - as_expr=false -fi - -if (basename -- /) >/dev/null 2>&1 && test "X`basename -- / 2>&1`" = "X/"; then - as_basename=basename -else - as_basename=false -fi - -if (as_dir=`dirname -- /` && test "X$as_dir" = X/) >/dev/null 2>&1; then - as_dirname=dirname -else - as_dirname=false -fi - -as_me=`$as_basename -- "$0" || -$as_expr X/"$0" : '.*/\([^/][^/]*\)/*$' \| \ - X"$0" : 'X\(//\)$' \| \ - X"$0" : 'X\(/\)' \| . 2>/dev/null || -$as_echo X/"$0" | - sed '/^.*\/\([^/][^/]*\)\/*$/{ - s//\1/ - q - } - /^X\/\(\/\/\)$/{ - s//\1/ - q - } - /^X\/\(\/\).*/{ - s//\1/ - q - } - s/.*/./; q'` - -# Avoid depending upon Character Ranges. -as_cr_letters='abcdefghijklmnopqrstuvwxyz' -as_cr_LETTERS='ABCDEFGHIJKLMNOPQRSTUVWXYZ' -as_cr_Letters=$as_cr_letters$as_cr_LETTERS -as_cr_digits='0123456789' -as_cr_alnum=$as_cr_Letters$as_cr_digits - -ECHO_C= ECHO_N= ECHO_T= -case `echo -n x` in #((((( --n*) - case `echo 'xy\c'` in - *c*) ECHO_T=' ';; # ECHO_T is single tab character. - xy) ECHO_C='\c';; - *) echo `echo ksh88 bug on AIX 6.1` > /dev/null - ECHO_T=' ';; - esac;; -*) - ECHO_N='-n';; -esac - -rm -f conf$$ conf$$.exe conf$$.file -if test -d conf$$.dir; then - rm -f conf$$.dir/conf$$.file -else - rm -f conf$$.dir - mkdir conf$$.dir 2>/dev/null -fi -if (echo >conf$$.file) 2>/dev/null; then - if ln -s conf$$.file conf$$ 2>/dev/null; then - as_ln_s='ln -s' - # ... but there are two gotchas: - # 1) On MSYS, both `ln -s file dir' and `ln file dir' fail. - # 2) DJGPP < 2.04 has no symlinks; `ln -s' creates a wrapper executable. - # In both cases, we have to default to `cp -pR'. - ln -s conf$$.file conf$$.dir 2>/dev/null && test ! -f conf$$.exe || - as_ln_s='cp -pR' - elif ln conf$$.file conf$$ 2>/dev/null; then - as_ln_s=ln - else - as_ln_s='cp -pR' - fi -else - as_ln_s='cp -pR' -fi -rm -f conf$$ conf$$.exe conf$$.dir/conf$$.file conf$$.file -rmdir conf$$.dir 2>/dev/null - - -# as_fn_mkdir_p -# ------------- -# Create "$as_dir" as a directory, including parents if necessary. -as_fn_mkdir_p () -{ - - case $as_dir in #( - -*) as_dir=./$as_dir;; - esac - test -d "$as_dir" || eval $as_mkdir_p || { - as_dirs= - while :; do - case $as_dir in #( - *\'*) as_qdir=`$as_echo "$as_dir" | sed "s/'/'\\\\\\\\''/g"`;; #'( - *) as_qdir=$as_dir;; - esac - as_dirs="'$as_qdir' $as_dirs" - as_dir=`$as_dirname -- "$as_dir" || -$as_expr X"$as_dir" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \ - X"$as_dir" : 'X\(//\)[^/]' \| \ - X"$as_dir" : 'X\(//\)$' \| \ - X"$as_dir" : 'X\(/\)' \| . 2>/dev/null || -$as_echo X"$as_dir" | - sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ - s//\1/ - q - } - /^X\(\/\/\)[^/].*/{ - s//\1/ - q - } - /^X\(\/\/\)$/{ - s//\1/ - q - } - /^X\(\/\).*/{ - s//\1/ - q - } - s/.*/./; q'` - test -d "$as_dir" && break - done - test -z "$as_dirs" || eval "mkdir $as_dirs" - } || test -d "$as_dir" || as_fn_error $? "cannot create directory $as_dir" - - -} # as_fn_mkdir_p -if mkdir -p . 2>/dev/null; then - as_mkdir_p='mkdir -p "$as_dir"' -else - test -d ./-p && rmdir ./-p - as_mkdir_p=false -fi - - -# as_fn_executable_p FILE -# ----------------------- -# Test if FILE is an executable regular file. -as_fn_executable_p () -{ - test -f "$1" && test -x "$1" -} # as_fn_executable_p -as_test_x='test -x' -as_executable_p=as_fn_executable_p - -# Sed expression to map a string onto a valid CPP name. -as_tr_cpp="eval sed 'y%*$as_cr_letters%P$as_cr_LETTERS%;s%[^_$as_cr_alnum]%_%g'" - -# Sed expression to map a string onto a valid variable name. -as_tr_sh="eval sed 'y%*+%pp%;s%[^_$as_cr_alnum]%_%g'" - - -exec 6>&1 -## ----------------------------------- ## -## Main body of $CONFIG_STATUS script. ## -## ----------------------------------- ## -# Save the log message, to keep $0 and so on meaningful, and to -# report actual input values of CONFIG_FILES etc. instead of their -# values after options handling. -ac_log=" -This file was extended by autohello $as_me 1.1, which was -generated by GNU Autoconf 2.69. Invocation command line was - - CONFIG_FILES = $CONFIG_FILES - CONFIG_HEADERS = $CONFIG_HEADERS - CONFIG_LINKS = $CONFIG_LINKS - CONFIG_COMMANDS = $CONFIG_COMMANDS - $ $0 $@ - -on `(hostname || uname -n) 2>/dev/null | sed 1q` -" - -# Files that config.status was made for. -config_files=" Makefile" -config_headers=" config.h" -config_commands=" depfiles" - -ac_cs_usage="\ -\`$as_me' instantiates files and other configuration actions -from templates according to the current configuration. Unless the files -and actions are specified as TAGs, all are instantiated by default. - -Usage: $0 [OPTION]... [TAG]... - - -h, --help print this help, then exit - -V, --version print version number and configuration settings, then exit - --config print configuration, then exit - -q, --quiet, --silent - do not print progress messages - -d, --debug don't remove temporary files - --recheck update $as_me by reconfiguring in the same conditions - --file=FILE[:TEMPLATE] - instantiate the configuration file FILE - --header=FILE[:TEMPLATE] - instantiate the configuration header FILE - -Configuration files: -$config_files - -Configuration headers: -$config_headers - -Configuration commands: -$config_commands - -Report bugs to ." - -ac_cs_config="" -ac_cs_version="\ -autohello config.status 1.1 -configured by ./configure, generated by GNU Autoconf 2.69, - with options \"$ac_cs_config\" - -Copyright (C) 2012 Free Software Foundation, Inc. -This config.status script is free software; the Free Software Foundation -gives unlimited permission to copy, distribute and modify it." - -ac_pwd='/home/local/src/poky/meta-linutronix/recipes-hello/autohello/files/autohello' -srcdir='.' -INSTALL='/usr/bin/install -c' -MKDIR_P='/bin/mkdir -p' -AWK='gawk' -test -n "$AWK" || AWK=awk -# The default lists apply if the user does not specify any file. -ac_need_defaults=: -while test $# != 0 -do - case $1 in - --*=?*) - ac_option=`expr "X$1" : 'X\([^=]*\)='` - ac_optarg=`expr "X$1" : 'X[^=]*=\(.*\)'` - ac_shift=: - ;; - --*=) - ac_option=`expr "X$1" : 'X\([^=]*\)='` - ac_optarg= - ac_shift=: - ;; - *) - ac_option=$1 - ac_optarg=$2 - ac_shift=shift - ;; - esac - - case $ac_option in - # Handling of the options. - -recheck | --recheck | --rechec | --reche | --rech | --rec | --re | --r) - ac_cs_recheck=: ;; - --version | --versio | --versi | --vers | --ver | --ve | --v | -V ) - $as_echo "$ac_cs_version"; exit ;; - --config | --confi | --conf | --con | --co | --c ) - $as_echo "$ac_cs_config"; exit ;; - --debug | --debu | --deb | --de | --d | -d ) - debug=: ;; - --file | --fil | --fi | --f ) - $ac_shift - case $ac_optarg in - *\'*) ac_optarg=`$as_echo "$ac_optarg" | sed "s/'/'\\\\\\\\''/g"` ;; - '') as_fn_error $? "missing file argument" ;; - esac - as_fn_append CONFIG_FILES " '$ac_optarg'" - ac_need_defaults=false;; - --header | --heade | --head | --hea ) - $ac_shift - case $ac_optarg in - *\'*) ac_optarg=`$as_echo "$ac_optarg" | sed "s/'/'\\\\\\\\''/g"` ;; - esac - as_fn_append CONFIG_HEADERS " '$ac_optarg'" - ac_need_defaults=false;; - --he | --h) - # Conflict between --help and --header - as_fn_error $? "ambiguous option: \`$1' -Try \`$0 --help' for more information.";; - --help | --hel | -h ) - $as_echo "$ac_cs_usage"; exit ;; - -q | -quiet | --quiet | --quie | --qui | --qu | --q \ - | -silent | --silent | --silen | --sile | --sil | --si | --s) - ac_cs_silent=: ;; - - # This is an error. - -*) as_fn_error $? "unrecognized option: \`$1' -Try \`$0 --help' for more information." ;; - - *) as_fn_append ac_config_targets " $1" - ac_need_defaults=false ;; - - esac - shift -done - -ac_configure_extra_args= - -if $ac_cs_silent; then - exec 6>/dev/null - ac_configure_extra_args="$ac_configure_extra_args --silent" -fi - -if $ac_cs_recheck; then - set X /bin/bash './configure' $ac_configure_extra_args --no-create --no-recursion - shift - $as_echo "running CONFIG_SHELL=/bin/bash $*" >&6 - CONFIG_SHELL='/bin/bash' - export CONFIG_SHELL - exec "$@" -fi - -exec 5>>config.log -{ - echo - sed 'h;s/./-/g;s/^.../## /;s/...$/ ##/;p;x;p;x' <<_ASBOX -## Running $as_me. ## -_ASBOX - $as_echo "$ac_log" -} >&5 - -# -# INIT-COMMANDS -# -AMDEP_TRUE="" ac_aux_dir="." - - -# Handling of arguments. -for ac_config_target in $ac_config_targets -do - case $ac_config_target in - "config.h") CONFIG_HEADERS="$CONFIG_HEADERS config.h" ;; - "depfiles") CONFIG_COMMANDS="$CONFIG_COMMANDS depfiles" ;; - "Makefile") CONFIG_FILES="$CONFIG_FILES Makefile" ;; - - *) as_fn_error $? "invalid argument: \`$ac_config_target'" "$LINENO" 5;; - esac -done - - -# If the user did not use the arguments to specify the items to instantiate, -# then the envvar interface is used. Set only those that are not. -# We use the long form for the default assignment because of an extremely -# bizarre bug on SunOS 4.1.3. -if $ac_need_defaults; then - test "${CONFIG_FILES+set}" = set || CONFIG_FILES=$config_files - test "${CONFIG_HEADERS+set}" = set || CONFIG_HEADERS=$config_headers - test "${CONFIG_COMMANDS+set}" = set || CONFIG_COMMANDS=$config_commands -fi - -# Have a temporary directory for convenience. Make it in the build tree -# simply because there is no reason against having it here, and in addition, -# creating and moving files from /tmp can sometimes cause problems. -# Hook for its removal unless debugging. -# Note that there is a small window in which the directory will not be cleaned: -# after its creation but before its name has been assigned to `$tmp'. -$debug || -{ - tmp= ac_tmp= - trap 'exit_status=$? - : "${ac_tmp:=$tmp}" - { test ! -d "$ac_tmp" || rm -fr "$ac_tmp"; } && exit $exit_status -' 0 - trap 'as_fn_exit 1' 1 2 13 15 -} -# Create a (secure) tmp directory for tmp files. - -{ - tmp=`(umask 077 && mktemp -d "./confXXXXXX") 2>/dev/null` && - test -d "$tmp" -} || -{ - tmp=./conf$$-$RANDOM - (umask 077 && mkdir "$tmp") -} || as_fn_error $? "cannot create a temporary directory in ." "$LINENO" 5 -ac_tmp=$tmp - -# Set up the scripts for CONFIG_FILES section. -# No need to generate them if there are no CONFIG_FILES. -# This happens for instance with `./config.status config.h'. -if test -n "$CONFIG_FILES"; then - - -ac_cr=`echo X | tr X '\015'` -# On cygwin, bash can eat \r inside `` if the user requested igncr. -# But we know of no other shell where ac_cr would be empty at this -# point, so we can use a bashism as a fallback. -if test "x$ac_cr" = x; then - eval ac_cr=\$\'\\r\' -fi -ac_cs_awk_cr=`$AWK 'BEGIN { print "a\rb" }' /dev/null` -if test "$ac_cs_awk_cr" = "a${ac_cr}b"; then - ac_cs_awk_cr='\\r' -else - ac_cs_awk_cr=$ac_cr -fi - -echo 'BEGIN {' >"$ac_tmp/subs1.awk" && -cat >>"$ac_tmp/subs1.awk" <<\_ACAWK && -S["am__EXEEXT_FALSE"]="" -S["am__EXEEXT_TRUE"]="#" -S["LTLIBOBJS"]="" -S["LIBOBJS"]="" -S["am__fastdepCC_FALSE"]="#" -S["am__fastdepCC_TRUE"]="" -S["CCDEPMODE"]="depmode=gcc3" -S["am__nodep"]="_no" -S["AMDEPBACKSLASH"]="\\" -S["AMDEP_FALSE"]="#" -S["AMDEP_TRUE"]="" -S["am__quote"]="" -S["am__include"]="include" -S["DEPDIR"]=".deps" -S["OBJEXT"]="o" -S["EXEEXT"]="" -S["ac_ct_CC"]="gcc" -S["CPPFLAGS"]="" -S["LDFLAGS"]="" -S["CFLAGS"]="-g -O2" -S["CC"]="gcc" -S["AM_BACKSLASH"]="\\" -S["AM_DEFAULT_VERBOSITY"]="1" -S["AM_DEFAULT_V"]="$(AM_DEFAULT_VERBOSITY)" -S["AM_V"]="$(V)" -S["am__untar"]="$${TAR-tar} xf -" -S["am__tar"]="$${TAR-tar} chof - \"$$tardir\"" -S["AMTAR"]="$${TAR-tar}" -S["am__leading_dot"]="." -S["SET_MAKE"]="" -S["AWK"]="gawk" -S["mkdir_p"]="$(MKDIR_P)" -S["MKDIR_P"]="/bin/mkdir -p" -S["INSTALL_STRIP_PROGRAM"]="$(install_sh) -c -s" -S["STRIP"]="" -S["install_sh"]="${SHELL} /home/local/src/poky/meta-linutronix/recipes-hello/autohello/files/autohello/install-sh" -S["MAKEINFO"]="${SHELL} /home/local/src/poky/meta-linutronix/recipes-hello/autohello/files/autohello/missing makeinfo" -S["AUTOHEADER"]="${SHELL} /home/local/src/poky/meta-linutronix/recipes-hello/autohello/files/autohello/missing autoheader" -S["AUTOMAKE"]="${SHELL} /home/local/src/poky/meta-linutronix/recipes-hello/autohello/files/autohello/missing automake-1.14" -S["AUTOCONF"]="${SHELL} /home/local/src/poky/meta-linutronix/recipes-hello/autohello/files/autohello/missing autoconf" -S["ACLOCAL"]="${SHELL} /home/local/src/poky/meta-linutronix/recipes-hello/autohello/files/autohello/missing aclocal-1.14" -S["VERSION"]="1.1" -S["PACKAGE"]="autohello" -S["CYGPATH_W"]="echo" -S["am__isrc"]="" -S["INSTALL_DATA"]="${INSTALL} -m 644" -S["INSTALL_SCRIPT"]="${INSTALL}" -S["INSTALL_PROGRAM"]="${INSTALL}" -S["target_alias"]="" -S["host_alias"]="" -S["build_alias"]="" -S["LIBS"]="" -S["ECHO_T"]="" -S["ECHO_N"]="-n" -S["ECHO_C"]="" -S["DEFS"]="-DHAVE_CONFIG_H" -S["mandir"]="${datarootdir}/man" -S["localedir"]="${datarootdir}/locale" -S["libdir"]="${exec_prefix}/lib" -S["psdir"]="${docdir}" -S["pdfdir"]="${docdir}" -S["dvidir"]="${docdir}" -S["htmldir"]="${docdir}" -S["infodir"]="${datarootdir}/info" -S["docdir"]="${datarootdir}/doc/${PACKAGE_TARNAME}" -S["oldincludedir"]="/usr/include" -S["includedir"]="${prefix}/include" -S["localstatedir"]="${prefix}/var" -S["sharedstatedir"]="${prefix}/com" -S["sysconfdir"]="${prefix}/etc" -S["datadir"]="${datarootdir}" -S["datarootdir"]="${prefix}/share" -S["libexecdir"]="${exec_prefix}/libexec" -S["sbindir"]="${exec_prefix}/sbin" -S["bindir"]="${exec_prefix}/bin" -S["program_transform_name"]="s,x,x," -S["prefix"]="/usr/local" -S["exec_prefix"]="${prefix}" -S["PACKAGE_URL"]="" -S["PACKAGE_BUGREPORT"]="maunt@linutronix.de" -S["PACKAGE_STRING"]="autohello 1.1" -S["PACKAGE_VERSION"]="1.1" -S["PACKAGE_TARNAME"]="autohello" -S["PACKAGE_NAME"]="autohello" -S["PATH_SEPARATOR"]=":" -S["SHELL"]="/bin/bash" -_ACAWK -cat >>"$ac_tmp/subs1.awk" <<_ACAWK && - for (key in S) S_is_set[key] = 1 - FS = "" - -} -{ - line = $ 0 - nfields = split(line, field, "@") - substed = 0 - len = length(field[1]) - for (i = 2; i < nfields; i++) { - key = field[i] - keylen = length(key) - if (S_is_set[key]) { - value = S[key] - line = substr(line, 1, len) "" value "" substr(line, len + keylen + 3) - len += length(value) + length(field[++i]) - substed = 1 - } else - len += 1 + keylen - } - - print line -} - -_ACAWK -if sed "s/$ac_cr//" < /dev/null > /dev/null 2>&1; then - sed "s/$ac_cr\$//; s/$ac_cr/$ac_cs_awk_cr/g" -else - cat -fi < "$ac_tmp/subs1.awk" > "$ac_tmp/subs.awk" \ - || as_fn_error $? "could not setup config files machinery" "$LINENO" 5 -fi # test -n "$CONFIG_FILES" - -# Set up the scripts for CONFIG_HEADERS section. -# No need to generate them if there are no CONFIG_HEADERS. -# This happens for instance with `./config.status Makefile'. -if test -n "$CONFIG_HEADERS"; then -cat >"$ac_tmp/defines.awk" <<\_ACAWK || -BEGIN { -D["PACKAGE_NAME"]=" \"autohello\"" -D["PACKAGE_TARNAME"]=" \"autohello\"" -D["PACKAGE_VERSION"]=" \"1.1\"" -D["PACKAGE_STRING"]=" \"autohello 1.1\"" -D["PACKAGE_BUGREPORT"]=" \"maunt@linutronix.de\"" -D["PACKAGE_URL"]=" \"\"" -D["PACKAGE"]=" \"autohello\"" -D["VERSION"]=" \"1.1\"" - for (key in D) D_is_set[key] = 1 - FS = "" -} -/^[\t ]*#[\t ]*(define|undef)[\t ]+[_abcdefghijklmnopqrstuvwxyzABCDEFGHIJKLMNOPQRSTUVWXYZ][_abcdefghijklmnopqrstuvwxyzABCDEFGHIJKLMNOPQRSTUVWXYZ0123456789]*([\t (]|$)/ { - line = $ 0 - split(line, arg, " ") - if (arg[1] == "#") { - defundef = arg[2] - mac1 = arg[3] - } else { - defundef = substr(arg[1], 2) - mac1 = arg[2] - } - split(mac1, mac2, "(") #) - macro = mac2[1] - prefix = substr(line, 1, index(line, defundef) - 1) - if (D_is_set[macro]) { - # Preserve the white space surrounding the "#". - print prefix "define", macro P[macro] D[macro] - next - } else { - # Replace #undef with comments. This is necessary, for example, - # in the case of _POSIX_SOURCE, which is predefined and required - # on some systems where configure will not decide to define it. - if (defundef == "undef") { - print "/*", prefix defundef, macro, "*/" - next - } - } -} -{ print } -_ACAWK - as_fn_error $? "could not setup config headers machinery" "$LINENO" 5 -fi # test -n "$CONFIG_HEADERS" - - -eval set X " :F $CONFIG_FILES :H $CONFIG_HEADERS :C $CONFIG_COMMANDS" -shift -for ac_tag -do - case $ac_tag in - :[FHLC]) ac_mode=$ac_tag; continue;; - esac - case $ac_mode$ac_tag in - :[FHL]*:*);; - :L* | :C*:*) as_fn_error $? "invalid tag \`$ac_tag'" "$LINENO" 5;; - :[FH]-) ac_tag=-:-;; - :[FH]*) ac_tag=$ac_tag:$ac_tag.in;; - esac - ac_save_IFS=$IFS - IFS=: - set x $ac_tag - IFS=$ac_save_IFS - shift - ac_file=$1 - shift - - case $ac_mode in - :L) ac_source=$1;; - :[FH]) - ac_file_inputs= - for ac_f - do - case $ac_f in - -) ac_f="$ac_tmp/stdin";; - *) # Look for the file first in the build tree, then in the source tree - # (if the path is not absolute). The absolute path cannot be DOS-style, - # because $ac_f cannot contain `:'. - test -f "$ac_f" || - case $ac_f in - [\\/$]*) false;; - *) test -f "$srcdir/$ac_f" && ac_f="$srcdir/$ac_f";; - esac || - as_fn_error 1 "cannot find input file: \`$ac_f'" "$LINENO" 5;; - esac - case $ac_f in *\'*) ac_f=`$as_echo "$ac_f" | sed "s/'/'\\\\\\\\''/g"`;; esac - as_fn_append ac_file_inputs " '$ac_f'" - done - - # Let's still pretend it is `configure' which instantiates (i.e., don't - # use $as_me), people would be surprised to read: - # /* config.h. Generated by config.status. */ - configure_input='Generated from '` - $as_echo "$*" | sed 's|^[^:]*/||;s|:[^:]*/|, |g' - `' by configure.' - if test x"$ac_file" != x-; then - configure_input="$ac_file. $configure_input" - { $as_echo "$as_me:${as_lineno-$LINENO}: creating $ac_file" >&5 -$as_echo "$as_me: creating $ac_file" >&6;} - fi - # Neutralize special characters interpreted by sed in replacement strings. - case $configure_input in #( - *\&* | *\|* | *\\* ) - ac_sed_conf_input=`$as_echo "$configure_input" | - sed 's/[\\\\&|]/\\\\&/g'`;; #( - *) ac_sed_conf_input=$configure_input;; - esac - - case $ac_tag in - *:-:* | *:-) cat >"$ac_tmp/stdin" \ - || as_fn_error $? "could not create $ac_file" "$LINENO" 5 ;; - esac - ;; - esac - - ac_dir=`$as_dirname -- "$ac_file" || -$as_expr X"$ac_file" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \ - X"$ac_file" : 'X\(//\)[^/]' \| \ - X"$ac_file" : 'X\(//\)$' \| \ - X"$ac_file" : 'X\(/\)' \| . 2>/dev/null || -$as_echo X"$ac_file" | - sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ - s//\1/ - q - } - /^X\(\/\/\)[^/].*/{ - s//\1/ - q - } - /^X\(\/\/\)$/{ - s//\1/ - q - } - /^X\(\/\).*/{ - s//\1/ - q - } - s/.*/./; q'` - as_dir="$ac_dir"; as_fn_mkdir_p - ac_builddir=. - -case "$ac_dir" in -.) ac_dir_suffix= ac_top_builddir_sub=. ac_top_build_prefix= ;; -*) - ac_dir_suffix=/`$as_echo "$ac_dir" | sed 's|^\.[\\/]||'` - # A ".." for each directory in $ac_dir_suffix. - ac_top_builddir_sub=`$as_echo "$ac_dir_suffix" | sed 's|/[^\\/]*|/..|g;s|/||'` - case $ac_top_builddir_sub in - "") ac_top_builddir_sub=. ac_top_build_prefix= ;; - *) ac_top_build_prefix=$ac_top_builddir_sub/ ;; - esac ;; -esac -ac_abs_top_builddir=$ac_pwd -ac_abs_builddir=$ac_pwd$ac_dir_suffix -# for backward compatibility: -ac_top_builddir=$ac_top_build_prefix - -case $srcdir in - .) # We are building in place. - ac_srcdir=. - ac_top_srcdir=$ac_top_builddir_sub - ac_abs_top_srcdir=$ac_pwd ;; - [\\/]* | ?:[\\/]* ) # Absolute name. - ac_srcdir=$srcdir$ac_dir_suffix; - ac_top_srcdir=$srcdir - ac_abs_top_srcdir=$srcdir ;; - *) # Relative name. - ac_srcdir=$ac_top_build_prefix$srcdir$ac_dir_suffix - ac_top_srcdir=$ac_top_build_prefix$srcdir - ac_abs_top_srcdir=$ac_pwd/$srcdir ;; -esac -ac_abs_srcdir=$ac_abs_top_srcdir$ac_dir_suffix - - - case $ac_mode in - :F) - # - # CONFIG_FILE - # - - case $INSTALL in - [\\/$]* | ?:[\\/]* ) ac_INSTALL=$INSTALL ;; - *) ac_INSTALL=$ac_top_build_prefix$INSTALL ;; - esac - ac_MKDIR_P=$MKDIR_P - case $MKDIR_P in - [\\/$]* | ?:[\\/]* ) ;; - */*) ac_MKDIR_P=$ac_top_build_prefix$MKDIR_P ;; - esac -# If the template does not know about datarootdir, expand it. -# FIXME: This hack should be removed a few years after 2.60. -ac_datarootdir_hack=; ac_datarootdir_seen= -ac_sed_dataroot=' -/datarootdir/ { - p - q -} -/@datadir@/p -/@docdir@/p -/@infodir@/p -/@localedir@/p -/@mandir@/p' -case `eval "sed -n \"\$ac_sed_dataroot\" $ac_file_inputs"` in -*datarootdir*) ac_datarootdir_seen=yes;; -*@datadir@*|*@docdir@*|*@infodir@*|*@localedir@*|*@mandir@*) - { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: $ac_file_inputs seems to ignore the --datarootdir setting" >&5 -$as_echo "$as_me: WARNING: $ac_file_inputs seems to ignore the --datarootdir setting" >&2;} - ac_datarootdir_hack=' - s&@datadir@&${datarootdir}&g - s&@docdir@&${datarootdir}/doc/${PACKAGE_TARNAME}&g - s&@infodir@&${datarootdir}/info&g - s&@localedir@&${datarootdir}/locale&g - s&@mandir@&${datarootdir}/man&g - s&\${datarootdir}&${prefix}/share&g' ;; -esac -ac_sed_extra="/^[ ]*VPATH[ ]*=[ ]*/{ -h -s/// -s/^/:/ -s/[ ]*$/:/ -s/:\$(srcdir):/:/g -s/:\${srcdir}:/:/g -s/:@srcdir@:/:/g -s/^:*// -s/:*$// -x -s/\(=[ ]*\).*/\1/ -G -s/\n// -s/^[^=]*=[ ]*$// -} - -:t -/@[a-zA-Z_][a-zA-Z_0-9]*@/!b -s|@configure_input@|$ac_sed_conf_input|;t t -s&@top_builddir@&$ac_top_builddir_sub&;t t -s&@top_build_prefix@&$ac_top_build_prefix&;t t -s&@srcdir@&$ac_srcdir&;t t -s&@abs_srcdir@&$ac_abs_srcdir&;t t -s&@top_srcdir@&$ac_top_srcdir&;t t -s&@abs_top_srcdir@&$ac_abs_top_srcdir&;t t -s&@builddir@&$ac_builddir&;t t -s&@abs_builddir@&$ac_abs_builddir&;t t -s&@abs_top_builddir@&$ac_abs_top_builddir&;t t -s&@INSTALL@&$ac_INSTALL&;t t -s&@MKDIR_P@&$ac_MKDIR_P&;t t -$ac_datarootdir_hack -" -eval sed \"\$ac_sed_extra\" "$ac_file_inputs" | $AWK -f "$ac_tmp/subs.awk" \ - >$ac_tmp/out || as_fn_error $? "could not create $ac_file" "$LINENO" 5 - -test -z "$ac_datarootdir_hack$ac_datarootdir_seen" && - { ac_out=`sed -n '/\${datarootdir}/p' "$ac_tmp/out"`; test -n "$ac_out"; } && - { ac_out=`sed -n '/^[ ]*datarootdir[ ]*:*=/p' \ - "$ac_tmp/out"`; test -z "$ac_out"; } && - { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: $ac_file contains a reference to the variable \`datarootdir' -which seems to be undefined. Please make sure it is defined" >&5 -$as_echo "$as_me: WARNING: $ac_file contains a reference to the variable \`datarootdir' -which seems to be undefined. Please make sure it is defined" >&2;} - - rm -f "$ac_tmp/stdin" - case $ac_file in - -) cat "$ac_tmp/out" && rm -f "$ac_tmp/out";; - *) rm -f "$ac_file" && mv "$ac_tmp/out" "$ac_file";; - esac \ - || as_fn_error $? "could not create $ac_file" "$LINENO" 5 - ;; - :H) - # - # CONFIG_HEADER - # - if test x"$ac_file" != x-; then - { - $as_echo "/* $configure_input */" \ - && eval '$AWK -f "$ac_tmp/defines.awk"' "$ac_file_inputs" - } >"$ac_tmp/config.h" \ - || as_fn_error $? "could not create $ac_file" "$LINENO" 5 - if diff "$ac_file" "$ac_tmp/config.h" >/dev/null 2>&1; then - { $as_echo "$as_me:${as_lineno-$LINENO}: $ac_file is unchanged" >&5 -$as_echo "$as_me: $ac_file is unchanged" >&6;} - else - rm -f "$ac_file" - mv "$ac_tmp/config.h" "$ac_file" \ - || as_fn_error $? "could not create $ac_file" "$LINENO" 5 - fi - else - $as_echo "/* $configure_input */" \ - && eval '$AWK -f "$ac_tmp/defines.awk"' "$ac_file_inputs" \ - || as_fn_error $? "could not create -" "$LINENO" 5 - fi -# Compute "$ac_file"'s index in $config_headers. -_am_arg="$ac_file" -_am_stamp_count=1 -for _am_header in $config_headers :; do - case $_am_header in - $_am_arg | $_am_arg:* ) - break ;; - * ) - _am_stamp_count=`expr $_am_stamp_count + 1` ;; - esac -done -echo "timestamp for $_am_arg" >`$as_dirname -- "$_am_arg" || -$as_expr X"$_am_arg" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \ - X"$_am_arg" : 'X\(//\)[^/]' \| \ - X"$_am_arg" : 'X\(//\)$' \| \ - X"$_am_arg" : 'X\(/\)' \| . 2>/dev/null || -$as_echo X"$_am_arg" | - sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ - s//\1/ - q - } - /^X\(\/\/\)[^/].*/{ - s//\1/ - q - } - /^X\(\/\/\)$/{ - s//\1/ - q - } - /^X\(\/\).*/{ - s//\1/ - q - } - s/.*/./; q'`/stamp-h$_am_stamp_count - ;; - - :C) { $as_echo "$as_me:${as_lineno-$LINENO}: executing $ac_file commands" >&5 -$as_echo "$as_me: executing $ac_file commands" >&6;} - ;; - esac - - - case $ac_file$ac_mode in - "depfiles":C) test x"$AMDEP_TRUE" != x"" || { - # Older Autoconf quotes --file arguments for eval, but not when files - # are listed without --file. Let's play safe and only enable the eval - # if we detect the quoting. - case $CONFIG_FILES in - *\'*) eval set x "$CONFIG_FILES" ;; - *) set x $CONFIG_FILES ;; - esac - shift - for mf - do - # Strip MF so we end up with the name of the file. - mf=`echo "$mf" | sed -e 's/:.*$//'` - # Check whether this is an Automake generated Makefile or not. - # We used to match only the files named 'Makefile.in', but - # some people rename them; so instead we look at the file content. - # Grep'ing the first line is not enough: some people post-process - # each Makefile.in and add a new line on top of each file to say so. - # Grep'ing the whole file is not good either: AIX grep has a line - # limit of 2048, but all sed's we know have understand at least 4000. - if sed -n 's,^#.*generated by automake.*,X,p' "$mf" | grep X >/dev/null 2>&1; then - dirpart=`$as_dirname -- "$mf" || -$as_expr X"$mf" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \ - X"$mf" : 'X\(//\)[^/]' \| \ - X"$mf" : 'X\(//\)$' \| \ - X"$mf" : 'X\(/\)' \| . 2>/dev/null || -$as_echo X"$mf" | - sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ - s//\1/ - q - } - /^X\(\/\/\)[^/].*/{ - s//\1/ - q - } - /^X\(\/\/\)$/{ - s//\1/ - q - } - /^X\(\/\).*/{ - s//\1/ - q - } - s/.*/./; q'` - else - continue - fi - # Extract the definition of DEPDIR, am__include, and am__quote - # from the Makefile without running 'make'. - DEPDIR=`sed -n 's/^DEPDIR = //p' < "$mf"` - test -z "$DEPDIR" && continue - am__include=`sed -n 's/^am__include = //p' < "$mf"` - test -z "$am__include" && continue - am__quote=`sed -n 's/^am__quote = //p' < "$mf"` - # Find all dependency output files, they are included files with - # $(DEPDIR) in their names. We invoke sed twice because it is the - # simplest approach to changing $(DEPDIR) to its actual value in the - # expansion. - for file in `sed -n " - s/^$am__include $am__quote\(.*(DEPDIR).*\)$am__quote"'$/\1/p' <"$mf" | \ - sed -e 's/\$(DEPDIR)/'"$DEPDIR"'/g'`; do - # Make sure the directory exists. - test -f "$dirpart/$file" && continue - fdir=`$as_dirname -- "$file" || -$as_expr X"$file" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \ - X"$file" : 'X\(//\)[^/]' \| \ - X"$file" : 'X\(//\)$' \| \ - X"$file" : 'X\(/\)' \| . 2>/dev/null || -$as_echo X"$file" | - sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ - s//\1/ - q - } - /^X\(\/\/\)[^/].*/{ - s//\1/ - q - } - /^X\(\/\/\)$/{ - s//\1/ - q - } - /^X\(\/\).*/{ - s//\1/ - q - } - s/.*/./; q'` - as_dir=$dirpart/$fdir; as_fn_mkdir_p - # echo "creating $dirpart/$file" - echo '# dummy' > "$dirpart/$file" - done - done -} - ;; - - esac -done # for ac_tag - - -as_fn_exit 0 diff --git a/distribution/yocto-advanced/poky/meta-mini/recipes-hello/autohello/files/autohello/configure b/distribution/yocto-advanced/poky/meta-mini/recipes-hello/autohello/files/autohello/configure deleted file mode 100755 index 339a062..0000000 --- a/distribution/yocto-advanced/poky/meta-mini/recipes-hello/autohello/files/autohello/configure +++ /dev/null @@ -1,4905 +0,0 @@ -#! /bin/sh -# Guess values for system-dependent variables and create Makefiles. -# Generated by GNU Autoconf 2.69 for autohello 1.1. -# -# Report bugs to . -# -# -# Copyright (C) 1992-1996, 1998-2012 Free Software Foundation, Inc. -# -# -# This configure script is free software; the Free Software Foundation -# gives unlimited permission to copy, distribute and modify it. -## -------------------- ## -## M4sh Initialization. ## -## -------------------- ## - -# Be more Bourne compatible -DUALCASE=1; export DUALCASE # for MKS sh -if test -n "${ZSH_VERSION+set}" && (emulate sh) >/dev/null 2>&1; then : - emulate sh - NULLCMD=: - # Pre-4.2 versions of Zsh do word splitting on ${1+"$@"}, which - # is contrary to our usage. Disable this feature. - alias -g '${1+"$@"}'='"$@"' - setopt NO_GLOB_SUBST -else - case `(set -o) 2>/dev/null` in #( - *posix*) : - set -o posix ;; #( - *) : - ;; -esac -fi - - -as_nl=' -' -export as_nl -# Printing a long string crashes Solaris 7 /usr/bin/printf. -as_echo='\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\' -as_echo=$as_echo$as_echo$as_echo$as_echo$as_echo -as_echo=$as_echo$as_echo$as_echo$as_echo$as_echo$as_echo -# Prefer a ksh shell builtin over an external printf program on Solaris, -# but without wasting forks for bash or zsh. -if test -z "$BASH_VERSION$ZSH_VERSION" \ - && (test "X`print -r -- $as_echo`" = "X$as_echo") 2>/dev/null; then - as_echo='print -r --' - as_echo_n='print -rn --' -elif (test "X`printf %s $as_echo`" = "X$as_echo") 2>/dev/null; then - as_echo='printf %s\n' - as_echo_n='printf %s' -else - if test "X`(/usr/ucb/echo -n -n $as_echo) 2>/dev/null`" = "X-n $as_echo"; then - as_echo_body='eval /usr/ucb/echo -n "$1$as_nl"' - as_echo_n='/usr/ucb/echo -n' - else - as_echo_body='eval expr "X$1" : "X\\(.*\\)"' - as_echo_n_body='eval - arg=$1; - case $arg in #( - *"$as_nl"*) - expr "X$arg" : "X\\(.*\\)$as_nl"; - arg=`expr "X$arg" : ".*$as_nl\\(.*\\)"`;; - esac; - expr "X$arg" : "X\\(.*\\)" | tr -d "$as_nl" - ' - export as_echo_n_body - as_echo_n='sh -c $as_echo_n_body as_echo' - fi - export as_echo_body - as_echo='sh -c $as_echo_body as_echo' -fi - -# The user is always right. -if test "${PATH_SEPARATOR+set}" != set; then - PATH_SEPARATOR=: - (PATH='/bin;/bin'; FPATH=$PATH; sh -c :) >/dev/null 2>&1 && { - (PATH='/bin:/bin'; FPATH=$PATH; sh -c :) >/dev/null 2>&1 || - PATH_SEPARATOR=';' - } -fi - - -# IFS -# We need space, tab and new line, in precisely that order. Quoting is -# there to prevent editors from complaining about space-tab. -# (If _AS_PATH_WALK were called with IFS unset, it would disable word -# splitting by setting IFS to empty value.) -IFS=" "" $as_nl" - -# Find who we are. Look in the path if we contain no directory separator. -as_myself= -case $0 in #(( - *[\\/]* ) as_myself=$0 ;; - *) as_save_IFS=$IFS; IFS=$PATH_SEPARATOR -for as_dir in $PATH -do - IFS=$as_save_IFS - test -z "$as_dir" && as_dir=. - test -r "$as_dir/$0" && as_myself=$as_dir/$0 && break - done -IFS=$as_save_IFS - - ;; -esac -# We did not find ourselves, most probably we were run as `sh COMMAND' -# in which case we are not to be found in the path. -if test "x$as_myself" = x; then - as_myself=$0 -fi -if test ! -f "$as_myself"; then - $as_echo "$as_myself: error: cannot find myself; rerun with an absolute file name" >&2 - exit 1 -fi - -# Unset variables that we do not need and which cause bugs (e.g. in -# pre-3.0 UWIN ksh). But do not cause bugs in bash 2.01; the "|| exit 1" -# suppresses any "Segmentation fault" message there. '((' could -# trigger a bug in pdksh 5.2.14. -for as_var in BASH_ENV ENV MAIL MAILPATH -do eval test x\${$as_var+set} = xset \ - && ( (unset $as_var) || exit 1) >/dev/null 2>&1 && unset $as_var || : -done -PS1='$ ' -PS2='> ' -PS4='+ ' - -# NLS nuisances. -LC_ALL=C -export LC_ALL -LANGUAGE=C -export LANGUAGE - -# CDPATH. -(unset CDPATH) >/dev/null 2>&1 && unset CDPATH - -# Use a proper internal environment variable to ensure we don't fall - # into an infinite loop, continuously re-executing ourselves. - if test x"${_as_can_reexec}" != xno && test "x$CONFIG_SHELL" != x; then - _as_can_reexec=no; export _as_can_reexec; - # We cannot yet assume a decent shell, so we have to provide a -# neutralization value for shells without unset; and this also -# works around shells that cannot unset nonexistent variables. -# Preserve -v and -x to the replacement shell. -BASH_ENV=/dev/null -ENV=/dev/null -(unset BASH_ENV) >/dev/null 2>&1 && unset BASH_ENV ENV -case $- in # (((( - *v*x* | *x*v* ) as_opts=-vx ;; - *v* ) as_opts=-v ;; - *x* ) as_opts=-x ;; - * ) as_opts= ;; -esac -exec $CONFIG_SHELL $as_opts "$as_myself" ${1+"$@"} -# Admittedly, this is quite paranoid, since all the known shells bail -# out after a failed `exec'. -$as_echo "$0: could not re-execute with $CONFIG_SHELL" >&2 -as_fn_exit 255 - fi - # We don't want this to propagate to other subprocesses. - { _as_can_reexec=; unset _as_can_reexec;} -if test "x$CONFIG_SHELL" = x; then - as_bourne_compatible="if test -n \"\${ZSH_VERSION+set}\" && (emulate sh) >/dev/null 2>&1; then : - emulate sh - NULLCMD=: - # Pre-4.2 versions of Zsh do word splitting on \${1+\"\$@\"}, which - # is contrary to our usage. Disable this feature. - alias -g '\${1+\"\$@\"}'='\"\$@\"' - setopt NO_GLOB_SUBST -else - case \`(set -o) 2>/dev/null\` in #( - *posix*) : - set -o posix ;; #( - *) : - ;; -esac -fi -" - as_required="as_fn_return () { (exit \$1); } -as_fn_success () { as_fn_return 0; } -as_fn_failure () { as_fn_return 1; } -as_fn_ret_success () { return 0; } -as_fn_ret_failure () { return 1; } - -exitcode=0 -as_fn_success || { exitcode=1; echo as_fn_success failed.; } -as_fn_failure && { exitcode=1; echo as_fn_failure succeeded.; } -as_fn_ret_success || { exitcode=1; echo as_fn_ret_success failed.; } -as_fn_ret_failure && { exitcode=1; echo as_fn_ret_failure succeeded.; } -if ( set x; as_fn_ret_success y && test x = \"\$1\" ); then : - -else - exitcode=1; echo positional parameters were not saved. -fi -test x\$exitcode = x0 || exit 1 -test -x / || exit 1" - as_suggested=" as_lineno_1=";as_suggested=$as_suggested$LINENO;as_suggested=$as_suggested" as_lineno_1a=\$LINENO - as_lineno_2=";as_suggested=$as_suggested$LINENO;as_suggested=$as_suggested" as_lineno_2a=\$LINENO - eval 'test \"x\$as_lineno_1'\$as_run'\" != \"x\$as_lineno_2'\$as_run'\" && - test \"x\`expr \$as_lineno_1'\$as_run' + 1\`\" = \"x\$as_lineno_2'\$as_run'\"' || exit 1" - if (eval "$as_required") 2>/dev/null; then : - as_have_required=yes -else - as_have_required=no -fi - if test x$as_have_required = xyes && (eval "$as_suggested") 2>/dev/null; then : - -else - as_save_IFS=$IFS; IFS=$PATH_SEPARATOR -as_found=false -for as_dir in /bin$PATH_SEPARATOR/usr/bin$PATH_SEPARATOR$PATH -do - IFS=$as_save_IFS - test -z "$as_dir" && as_dir=. - as_found=: - case $as_dir in #( - /*) - for as_base in sh bash ksh sh5; do - # Try only shells that exist, to save several forks. - as_shell=$as_dir/$as_base - if { test -f "$as_shell" || test -f "$as_shell.exe"; } && - { $as_echo "$as_bourne_compatible""$as_required" | as_run=a "$as_shell"; } 2>/dev/null; then : - CONFIG_SHELL=$as_shell as_have_required=yes - if { $as_echo "$as_bourne_compatible""$as_suggested" | as_run=a "$as_shell"; } 2>/dev/null; then : - break 2 -fi -fi - done;; - esac - as_found=false -done -$as_found || { if { test -f "$SHELL" || test -f "$SHELL.exe"; } && - { $as_echo "$as_bourne_compatible""$as_required" | as_run=a "$SHELL"; } 2>/dev/null; then : - CONFIG_SHELL=$SHELL as_have_required=yes -fi; } -IFS=$as_save_IFS - - - if test "x$CONFIG_SHELL" != x; then : - export CONFIG_SHELL - # We cannot yet assume a decent shell, so we have to provide a -# neutralization value for shells without unset; and this also -# works around shells that cannot unset nonexistent variables. -# Preserve -v and -x to the replacement shell. -BASH_ENV=/dev/null -ENV=/dev/null -(unset BASH_ENV) >/dev/null 2>&1 && unset BASH_ENV ENV -case $- in # (((( - *v*x* | *x*v* ) as_opts=-vx ;; - *v* ) as_opts=-v ;; - *x* ) as_opts=-x ;; - * ) as_opts= ;; -esac -exec $CONFIG_SHELL $as_opts "$as_myself" ${1+"$@"} -# Admittedly, this is quite paranoid, since all the known shells bail -# out after a failed `exec'. -$as_echo "$0: could not re-execute with $CONFIG_SHELL" >&2 -exit 255 -fi - - if test x$as_have_required = xno; then : - $as_echo "$0: This script requires a shell more modern than all" - $as_echo "$0: the shells that I found on your system." - if test x${ZSH_VERSION+set} = xset ; then - $as_echo "$0: In particular, zsh $ZSH_VERSION has bugs and should" - $as_echo "$0: be upgraded to zsh 4.3.4 or later." - else - $as_echo "$0: Please tell bug-autoconf@gnu.org and -$0: maunt@linutronix.de about your system, including any -$0: error possibly output before this message. Then install -$0: a modern shell, or manually run the script under such a -$0: shell if you do have one." - fi - exit 1 -fi -fi -fi -SHELL=${CONFIG_SHELL-/bin/sh} -export SHELL -# Unset more variables known to interfere with behavior of common tools. -CLICOLOR_FORCE= GREP_OPTIONS= -unset CLICOLOR_FORCE GREP_OPTIONS - -## --------------------- ## -## M4sh Shell Functions. ## -## --------------------- ## -# as_fn_unset VAR -# --------------- -# Portably unset VAR. -as_fn_unset () -{ - { eval $1=; unset $1;} -} -as_unset=as_fn_unset - -# as_fn_set_status STATUS -# ----------------------- -# Set $? to STATUS, without forking. -as_fn_set_status () -{ - return $1 -} # as_fn_set_status - -# as_fn_exit STATUS -# ----------------- -# Exit the shell with STATUS, even in a "trap 0" or "set -e" context. -as_fn_exit () -{ - set +e - as_fn_set_status $1 - exit $1 -} # as_fn_exit - -# as_fn_mkdir_p -# ------------- -# Create "$as_dir" as a directory, including parents if necessary. -as_fn_mkdir_p () -{ - - case $as_dir in #( - -*) as_dir=./$as_dir;; - esac - test -d "$as_dir" || eval $as_mkdir_p || { - as_dirs= - while :; do - case $as_dir in #( - *\'*) as_qdir=`$as_echo "$as_dir" | sed "s/'/'\\\\\\\\''/g"`;; #'( - *) as_qdir=$as_dir;; - esac - as_dirs="'$as_qdir' $as_dirs" - as_dir=`$as_dirname -- "$as_dir" || -$as_expr X"$as_dir" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \ - X"$as_dir" : 'X\(//\)[^/]' \| \ - X"$as_dir" : 'X\(//\)$' \| \ - X"$as_dir" : 'X\(/\)' \| . 2>/dev/null || -$as_echo X"$as_dir" | - sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ - s//\1/ - q - } - /^X\(\/\/\)[^/].*/{ - s//\1/ - q - } - /^X\(\/\/\)$/{ - s//\1/ - q - } - /^X\(\/\).*/{ - s//\1/ - q - } - s/.*/./; q'` - test -d "$as_dir" && break - done - test -z "$as_dirs" || eval "mkdir $as_dirs" - } || test -d "$as_dir" || as_fn_error $? "cannot create directory $as_dir" - - -} # as_fn_mkdir_p - -# as_fn_executable_p FILE -# ----------------------- -# Test if FILE is an executable regular file. -as_fn_executable_p () -{ - test -f "$1" && test -x "$1" -} # as_fn_executable_p -# as_fn_append VAR VALUE -# ---------------------- -# Append the text in VALUE to the end of the definition contained in VAR. Take -# advantage of any shell optimizations that allow amortized linear growth over -# repeated appends, instead of the typical quadratic growth present in naive -# implementations. -if (eval "as_var=1; as_var+=2; test x\$as_var = x12") 2>/dev/null; then : - eval 'as_fn_append () - { - eval $1+=\$2 - }' -else - as_fn_append () - { - eval $1=\$$1\$2 - } -fi # as_fn_append - -# as_fn_arith ARG... -# ------------------ -# Perform arithmetic evaluation on the ARGs, and store the result in the -# global $as_val. Take advantage of shells that can avoid forks. The arguments -# must be portable across $(()) and expr. -if (eval "test \$(( 1 + 1 )) = 2") 2>/dev/null; then : - eval 'as_fn_arith () - { - as_val=$(( $* )) - }' -else - as_fn_arith () - { - as_val=`expr "$@" || test $? -eq 1` - } -fi # as_fn_arith - - -# as_fn_error STATUS ERROR [LINENO LOG_FD] -# ---------------------------------------- -# Output "`basename $0`: error: ERROR" to stderr. If LINENO and LOG_FD are -# provided, also output the error to LOG_FD, referencing LINENO. Then exit the -# script with STATUS, using 1 if that was 0. -as_fn_error () -{ - as_status=$1; test $as_status -eq 0 && as_status=1 - if test "$4"; then - as_lineno=${as_lineno-"$3"} as_lineno_stack=as_lineno_stack=$as_lineno_stack - $as_echo "$as_me:${as_lineno-$LINENO}: error: $2" >&$4 - fi - $as_echo "$as_me: error: $2" >&2 - as_fn_exit $as_status -} # as_fn_error - -if expr a : '\(a\)' >/dev/null 2>&1 && - test "X`expr 00001 : '.*\(...\)'`" = X001; then - as_expr=expr -else - as_expr=false -fi - -if (basename -- /) >/dev/null 2>&1 && test "X`basename -- / 2>&1`" = "X/"; then - as_basename=basename -else - as_basename=false -fi - -if (as_dir=`dirname -- /` && test "X$as_dir" = X/) >/dev/null 2>&1; then - as_dirname=dirname -else - as_dirname=false -fi - -as_me=`$as_basename -- "$0" || -$as_expr X/"$0" : '.*/\([^/][^/]*\)/*$' \| \ - X"$0" : 'X\(//\)$' \| \ - X"$0" : 'X\(/\)' \| . 2>/dev/null || -$as_echo X/"$0" | - sed '/^.*\/\([^/][^/]*\)\/*$/{ - s//\1/ - q - } - /^X\/\(\/\/\)$/{ - s//\1/ - q - } - /^X\/\(\/\).*/{ - s//\1/ - q - } - s/.*/./; q'` - -# Avoid depending upon Character Ranges. -as_cr_letters='abcdefghijklmnopqrstuvwxyz' -as_cr_LETTERS='ABCDEFGHIJKLMNOPQRSTUVWXYZ' -as_cr_Letters=$as_cr_letters$as_cr_LETTERS -as_cr_digits='0123456789' -as_cr_alnum=$as_cr_Letters$as_cr_digits - - - as_lineno_1=$LINENO as_lineno_1a=$LINENO - as_lineno_2=$LINENO as_lineno_2a=$LINENO - eval 'test "x$as_lineno_1'$as_run'" != "x$as_lineno_2'$as_run'" && - test "x`expr $as_lineno_1'$as_run' + 1`" = "x$as_lineno_2'$as_run'"' || { - # Blame Lee E. McMahon (1931-1989) for sed's syntax. :-) - sed -n ' - p - /[$]LINENO/= - ' <$as_myself | - sed ' - s/[$]LINENO.*/&-/ - t lineno - b - :lineno - N - :loop - s/[$]LINENO\([^'$as_cr_alnum'_].*\n\)\(.*\)/\2\1\2/ - t loop - s/-\n.*// - ' >$as_me.lineno && - chmod +x "$as_me.lineno" || - { $as_echo "$as_me: error: cannot create $as_me.lineno; rerun with a POSIX shell" >&2; as_fn_exit 1; } - - # If we had to re-execute with $CONFIG_SHELL, we're ensured to have - # already done that, so ensure we don't try to do so again and fall - # in an infinite loop. This has already happened in practice. - _as_can_reexec=no; export _as_can_reexec - # Don't try to exec as it changes $[0], causing all sort of problems - # (the dirname of $[0] is not the place where we might find the - # original and so on. Autoconf is especially sensitive to this). - . "./$as_me.lineno" - # Exit status is that of the last command. - exit -} - -ECHO_C= ECHO_N= ECHO_T= -case `echo -n x` in #((((( --n*) - case `echo 'xy\c'` in - *c*) ECHO_T=' ';; # ECHO_T is single tab character. - xy) ECHO_C='\c';; - *) echo `echo ksh88 bug on AIX 6.1` > /dev/null - ECHO_T=' ';; - esac;; -*) - ECHO_N='-n';; -esac - -rm -f conf$$ conf$$.exe conf$$.file -if test -d conf$$.dir; then - rm -f conf$$.dir/conf$$.file -else - rm -f conf$$.dir - mkdir conf$$.dir 2>/dev/null -fi -if (echo >conf$$.file) 2>/dev/null; then - if ln -s conf$$.file conf$$ 2>/dev/null; then - as_ln_s='ln -s' - # ... but there are two gotchas: - # 1) On MSYS, both `ln -s file dir' and `ln file dir' fail. - # 2) DJGPP < 2.04 has no symlinks; `ln -s' creates a wrapper executable. - # In both cases, we have to default to `cp -pR'. - ln -s conf$$.file conf$$.dir 2>/dev/null && test ! -f conf$$.exe || - as_ln_s='cp -pR' - elif ln conf$$.file conf$$ 2>/dev/null; then - as_ln_s=ln - else - as_ln_s='cp -pR' - fi -else - as_ln_s='cp -pR' -fi -rm -f conf$$ conf$$.exe conf$$.dir/conf$$.file conf$$.file -rmdir conf$$.dir 2>/dev/null - -if mkdir -p . 2>/dev/null; then - as_mkdir_p='mkdir -p "$as_dir"' -else - test -d ./-p && rmdir ./-p - as_mkdir_p=false -fi - -as_test_x='test -x' -as_executable_p=as_fn_executable_p - -# Sed expression to map a string onto a valid CPP name. -as_tr_cpp="eval sed 'y%*$as_cr_letters%P$as_cr_LETTERS%;s%[^_$as_cr_alnum]%_%g'" - -# Sed expression to map a string onto a valid variable name. -as_tr_sh="eval sed 'y%*+%pp%;s%[^_$as_cr_alnum]%_%g'" - - -test -n "$DJDIR" || exec 7<&0 &1 - -# Name of the host. -# hostname on some systems (SVR3.2, old GNU/Linux) returns a bogus exit status, -# so uname gets run too. -ac_hostname=`(hostname || uname -n) 2>/dev/null | sed 1q` - -# -# Initializations. -# -ac_default_prefix=/usr/local -ac_clean_files= -ac_config_libobj_dir=. -LIBOBJS= -cross_compiling=no -subdirs= -MFLAGS= -MAKEFLAGS= - -# Identity of this package. -PACKAGE_NAME='autohello' -PACKAGE_TARNAME='autohello' -PACKAGE_VERSION='1.1' -PACKAGE_STRING='autohello 1.1' -PACKAGE_BUGREPORT='maunt@linutronix.de' -PACKAGE_URL='' - -ac_unique_file="autohello.c" -ac_subst_vars='am__EXEEXT_FALSE -am__EXEEXT_TRUE -LTLIBOBJS -LIBOBJS -am__fastdepCC_FALSE -am__fastdepCC_TRUE -CCDEPMODE -am__nodep -AMDEPBACKSLASH -AMDEP_FALSE -AMDEP_TRUE -am__quote -am__include -DEPDIR -OBJEXT -EXEEXT -ac_ct_CC -CPPFLAGS -LDFLAGS -CFLAGS -CC -AM_BACKSLASH -AM_DEFAULT_VERBOSITY -AM_DEFAULT_V -AM_V -am__untar -am__tar -AMTAR -am__leading_dot -SET_MAKE -AWK -mkdir_p -MKDIR_P -INSTALL_STRIP_PROGRAM -STRIP -install_sh -MAKEINFO -AUTOHEADER -AUTOMAKE -AUTOCONF -ACLOCAL -VERSION -PACKAGE -CYGPATH_W -am__isrc -INSTALL_DATA -INSTALL_SCRIPT -INSTALL_PROGRAM -target_alias -host_alias -build_alias -LIBS -ECHO_T -ECHO_N -ECHO_C -DEFS -mandir -localedir -libdir -psdir -pdfdir -dvidir -htmldir -infodir -docdir -oldincludedir -includedir -localstatedir -sharedstatedir -sysconfdir -datadir -datarootdir -libexecdir -sbindir -bindir -program_transform_name -prefix -exec_prefix -PACKAGE_URL -PACKAGE_BUGREPORT -PACKAGE_STRING -PACKAGE_VERSION -PACKAGE_TARNAME -PACKAGE_NAME -PATH_SEPARATOR -SHELL' -ac_subst_files='' -ac_user_opts=' -enable_option_checking -enable_silent_rules -enable_dependency_tracking -' - ac_precious_vars='build_alias -host_alias -target_alias -CC -CFLAGS -LDFLAGS -LIBS -CPPFLAGS' - - -# Initialize some variables set by options. -ac_init_help= -ac_init_version=false -ac_unrecognized_opts= -ac_unrecognized_sep= -# The variables have the same names as the options, with -# dashes changed to underlines. -cache_file=/dev/null -exec_prefix=NONE -no_create= -no_recursion= -prefix=NONE -program_prefix=NONE -program_suffix=NONE -program_transform_name=s,x,x, -silent= -site= -srcdir= -verbose= -x_includes=NONE -x_libraries=NONE - -# Installation directory options. -# These are left unexpanded so users can "make install exec_prefix=/foo" -# and all the variables that are supposed to be based on exec_prefix -# by default will actually change. -# Use braces instead of parens because sh, perl, etc. also accept them. -# (The list follows the same order as the GNU Coding Standards.) -bindir='${exec_prefix}/bin' -sbindir='${exec_prefix}/sbin' -libexecdir='${exec_prefix}/libexec' -datarootdir='${prefix}/share' -datadir='${datarootdir}' -sysconfdir='${prefix}/etc' -sharedstatedir='${prefix}/com' -localstatedir='${prefix}/var' -includedir='${prefix}/include' -oldincludedir='/usr/include' -docdir='${datarootdir}/doc/${PACKAGE_TARNAME}' -infodir='${datarootdir}/info' -htmldir='${docdir}' -dvidir='${docdir}' -pdfdir='${docdir}' -psdir='${docdir}' -libdir='${exec_prefix}/lib' -localedir='${datarootdir}/locale' -mandir='${datarootdir}/man' - -ac_prev= -ac_dashdash= -for ac_option -do - # If the previous option needs an argument, assign it. - if test -n "$ac_prev"; then - eval $ac_prev=\$ac_option - ac_prev= - continue - fi - - case $ac_option in - *=?*) ac_optarg=`expr "X$ac_option" : '[^=]*=\(.*\)'` ;; - *=) ac_optarg= ;; - *) ac_optarg=yes ;; - esac - - # Accept the important Cygnus configure options, so we can diagnose typos. - - case $ac_dashdash$ac_option in - --) - ac_dashdash=yes ;; - - -bindir | --bindir | --bindi | --bind | --bin | --bi) - ac_prev=bindir ;; - -bindir=* | --bindir=* | --bindi=* | --bind=* | --bin=* | --bi=*) - bindir=$ac_optarg ;; - - -build | --build | --buil | --bui | --bu) - ac_prev=build_alias ;; - -build=* | --build=* | --buil=* | --bui=* | --bu=*) - build_alias=$ac_optarg ;; - - -cache-file | --cache-file | --cache-fil | --cache-fi \ - | --cache-f | --cache- | --cache | --cach | --cac | --ca | --c) - ac_prev=cache_file ;; - -cache-file=* | --cache-file=* | --cache-fil=* | --cache-fi=* \ - | --cache-f=* | --cache-=* | --cache=* | --cach=* | --cac=* | --ca=* | --c=*) - cache_file=$ac_optarg ;; - - --config-cache | -C) - cache_file=config.cache ;; - - -datadir | --datadir | --datadi | --datad) - ac_prev=datadir ;; - -datadir=* | --datadir=* | --datadi=* | --datad=*) - datadir=$ac_optarg ;; - - -datarootdir | --datarootdir | --datarootdi | --datarootd | --dataroot \ - | --dataroo | --dataro | --datar) - ac_prev=datarootdir ;; - -datarootdir=* | --datarootdir=* | --datarootdi=* | --datarootd=* \ - | --dataroot=* | --dataroo=* | --dataro=* | --datar=*) - datarootdir=$ac_optarg ;; - - -disable-* | --disable-*) - ac_useropt=`expr "x$ac_option" : 'x-*disable-\(.*\)'` - # Reject names that are not valid shell variable names. - expr "x$ac_useropt" : ".*[^-+._$as_cr_alnum]" >/dev/null && - as_fn_error $? "invalid feature name: $ac_useropt" - ac_useropt_orig=$ac_useropt - ac_useropt=`$as_echo "$ac_useropt" | sed 's/[-+.]/_/g'` - case $ac_user_opts in - *" -"enable_$ac_useropt" -"*) ;; - *) ac_unrecognized_opts="$ac_unrecognized_opts$ac_unrecognized_sep--disable-$ac_useropt_orig" - ac_unrecognized_sep=', ';; - esac - eval enable_$ac_useropt=no ;; - - -docdir | --docdir | --docdi | --doc | --do) - ac_prev=docdir ;; - -docdir=* | --docdir=* | --docdi=* | --doc=* | --do=*) - docdir=$ac_optarg ;; - - -dvidir | --dvidir | --dvidi | --dvid | --dvi | --dv) - ac_prev=dvidir ;; - -dvidir=* | --dvidir=* | --dvidi=* | --dvid=* | --dvi=* | --dv=*) - dvidir=$ac_optarg ;; - - -enable-* | --enable-*) - ac_useropt=`expr "x$ac_option" : 'x-*enable-\([^=]*\)'` - # Reject names that are not valid shell variable names. - expr "x$ac_useropt" : ".*[^-+._$as_cr_alnum]" >/dev/null && - as_fn_error $? "invalid feature name: $ac_useropt" - ac_useropt_orig=$ac_useropt - ac_useropt=`$as_echo "$ac_useropt" | sed 's/[-+.]/_/g'` - case $ac_user_opts in - *" -"enable_$ac_useropt" -"*) ;; - *) ac_unrecognized_opts="$ac_unrecognized_opts$ac_unrecognized_sep--enable-$ac_useropt_orig" - ac_unrecognized_sep=', ';; - esac - eval enable_$ac_useropt=\$ac_optarg ;; - - -exec-prefix | --exec_prefix | --exec-prefix | --exec-prefi \ - | --exec-pref | --exec-pre | --exec-pr | --exec-p | --exec- \ - | --exec | --exe | --ex) - ac_prev=exec_prefix ;; - -exec-prefix=* | --exec_prefix=* | --exec-prefix=* | --exec-prefi=* \ - | --exec-pref=* | --exec-pre=* | --exec-pr=* | --exec-p=* | --exec-=* \ - | --exec=* | --exe=* | --ex=*) - exec_prefix=$ac_optarg ;; - - -gas | --gas | --ga | --g) - # Obsolete; use --with-gas. - with_gas=yes ;; - - -help | --help | --hel | --he | -h) - ac_init_help=long ;; - -help=r* | --help=r* | --hel=r* | --he=r* | -hr*) - ac_init_help=recursive ;; - -help=s* | --help=s* | --hel=s* | --he=s* | -hs*) - ac_init_help=short ;; - - -host | --host | --hos | --ho) - ac_prev=host_alias ;; - -host=* | --host=* | --hos=* | --ho=*) - host_alias=$ac_optarg ;; - - -htmldir | --htmldir | --htmldi | --htmld | --html | --htm | --ht) - ac_prev=htmldir ;; - -htmldir=* | --htmldir=* | --htmldi=* | --htmld=* | --html=* | --htm=* \ - | --ht=*) - htmldir=$ac_optarg ;; - - -includedir | --includedir | --includedi | --included | --include \ - | --includ | --inclu | --incl | --inc) - ac_prev=includedir ;; - -includedir=* | --includedir=* | --includedi=* | --included=* | --include=* \ - | --includ=* | --inclu=* | --incl=* | --inc=*) - includedir=$ac_optarg ;; - - -infodir | --infodir | --infodi | --infod | --info | --inf) - ac_prev=infodir ;; - -infodir=* | --infodir=* | --infodi=* | --infod=* | --info=* | --inf=*) - infodir=$ac_optarg ;; - - -libdir | --libdir | --libdi | --libd) - ac_prev=libdir ;; - -libdir=* | --libdir=* | --libdi=* | --libd=*) - libdir=$ac_optarg ;; - - -libexecdir | --libexecdir | --libexecdi | --libexecd | --libexec \ - | --libexe | --libex | --libe) - ac_prev=libexecdir ;; - -libexecdir=* | --libexecdir=* | --libexecdi=* | --libexecd=* | --libexec=* \ - | --libexe=* | --libex=* | --libe=*) - libexecdir=$ac_optarg ;; - - -localedir | --localedir | --localedi | --localed | --locale) - ac_prev=localedir ;; - -localedir=* | --localedir=* | --localedi=* | --localed=* | --locale=*) - localedir=$ac_optarg ;; - - -localstatedir | --localstatedir | --localstatedi | --localstated \ - | --localstate | --localstat | --localsta | --localst | --locals) - ac_prev=localstatedir ;; - -localstatedir=* | --localstatedir=* | --localstatedi=* | --localstated=* \ - | --localstate=* | --localstat=* | --localsta=* | --localst=* | --locals=*) - localstatedir=$ac_optarg ;; - - -mandir | --mandir | --mandi | --mand | --man | --ma | --m) - ac_prev=mandir ;; - -mandir=* | --mandir=* | --mandi=* | --mand=* | --man=* | --ma=* | --m=*) - mandir=$ac_optarg ;; - - -nfp | --nfp | --nf) - # Obsolete; use --without-fp. - with_fp=no ;; - - -no-create | --no-create | --no-creat | --no-crea | --no-cre \ - | --no-cr | --no-c | -n) - no_create=yes ;; - - -no-recursion | --no-recursion | --no-recursio | --no-recursi \ - | --no-recurs | --no-recur | --no-recu | --no-rec | --no-re | --no-r) - no_recursion=yes ;; - - -oldincludedir | --oldincludedir | --oldincludedi | --oldincluded \ - | --oldinclude | --oldinclud | --oldinclu | --oldincl | --oldinc \ - | --oldin | --oldi | --old | --ol | --o) - ac_prev=oldincludedir ;; - -oldincludedir=* | --oldincludedir=* | --oldincludedi=* | --oldincluded=* \ - | --oldinclude=* | --oldinclud=* | --oldinclu=* | --oldincl=* | --oldinc=* \ - | --oldin=* | --oldi=* | --old=* | --ol=* | --o=*) - oldincludedir=$ac_optarg ;; - - -prefix | --prefix | --prefi | --pref | --pre | --pr | --p) - ac_prev=prefix ;; - -prefix=* | --prefix=* | --prefi=* | --pref=* | --pre=* | --pr=* | --p=*) - prefix=$ac_optarg ;; - - -program-prefix | --program-prefix | --program-prefi | --program-pref \ - | --program-pre | --program-pr | --program-p) - ac_prev=program_prefix ;; - -program-prefix=* | --program-prefix=* | --program-prefi=* \ - | --program-pref=* | --program-pre=* | --program-pr=* | --program-p=*) - program_prefix=$ac_optarg ;; - - -program-suffix | --program-suffix | --program-suffi | --program-suff \ - | --program-suf | --program-su | --program-s) - ac_prev=program_suffix ;; - -program-suffix=* | --program-suffix=* | --program-suffi=* \ - | --program-suff=* | --program-suf=* | --program-su=* | --program-s=*) - program_suffix=$ac_optarg ;; - - -program-transform-name | --program-transform-name \ - | --program-transform-nam | --program-transform-na \ - | --program-transform-n | --program-transform- \ - | --program-transform | --program-transfor \ - | --program-transfo | --program-transf \ - | --program-trans | --program-tran \ - | --progr-tra | --program-tr | --program-t) - ac_prev=program_transform_name ;; - -program-transform-name=* | --program-transform-name=* \ - | --program-transform-nam=* | --program-transform-na=* \ - | --program-transform-n=* | --program-transform-=* \ - | --program-transform=* | --program-transfor=* \ - | --program-transfo=* | --program-transf=* \ - | --program-trans=* | --program-tran=* \ - | --progr-tra=* | --program-tr=* | --program-t=*) - program_transform_name=$ac_optarg ;; - - -pdfdir | --pdfdir | --pdfdi | --pdfd | --pdf | --pd) - ac_prev=pdfdir ;; - -pdfdir=* | --pdfdir=* | --pdfdi=* | --pdfd=* | --pdf=* | --pd=*) - pdfdir=$ac_optarg ;; - - -psdir | --psdir | --psdi | --psd | --ps) - ac_prev=psdir ;; - -psdir=* | --psdir=* | --psdi=* | --psd=* | --ps=*) - psdir=$ac_optarg ;; - - -q | -quiet | --quiet | --quie | --qui | --qu | --q \ - | -silent | --silent | --silen | --sile | --sil) - silent=yes ;; - - -sbindir | --sbindir | --sbindi | --sbind | --sbin | --sbi | --sb) - ac_prev=sbindir ;; - -sbindir=* | --sbindir=* | --sbindi=* | --sbind=* | --sbin=* \ - | --sbi=* | --sb=*) - sbindir=$ac_optarg ;; - - -sharedstatedir | --sharedstatedir | --sharedstatedi \ - | --sharedstated | --sharedstate | --sharedstat | --sharedsta \ - | --sharedst | --shareds | --shared | --share | --shar \ - | --sha | --sh) - ac_prev=sharedstatedir ;; - -sharedstatedir=* | --sharedstatedir=* | --sharedstatedi=* \ - | --sharedstated=* | --sharedstate=* | --sharedstat=* | --sharedsta=* \ - | --sharedst=* | --shareds=* | --shared=* | --share=* | --shar=* \ - | --sha=* | --sh=*) - sharedstatedir=$ac_optarg ;; - - -site | --site | --sit) - ac_prev=site ;; - -site=* | --site=* | --sit=*) - site=$ac_optarg ;; - - -srcdir | --srcdir | --srcdi | --srcd | --src | --sr) - ac_prev=srcdir ;; - -srcdir=* | --srcdir=* | --srcdi=* | --srcd=* | --src=* | --sr=*) - srcdir=$ac_optarg ;; - - -sysconfdir | --sysconfdir | --sysconfdi | --sysconfd | --sysconf \ - | --syscon | --sysco | --sysc | --sys | --sy) - ac_prev=sysconfdir ;; - -sysconfdir=* | --sysconfdir=* | --sysconfdi=* | --sysconfd=* | --sysconf=* \ - | --syscon=* | --sysco=* | --sysc=* | --sys=* | --sy=*) - sysconfdir=$ac_optarg ;; - - -target | --target | --targe | --targ | --tar | --ta | --t) - ac_prev=target_alias ;; - -target=* | --target=* | --targe=* | --targ=* | --tar=* | --ta=* | --t=*) - target_alias=$ac_optarg ;; - - -v | -verbose | --verbose | --verbos | --verbo | --verb) - verbose=yes ;; - - -version | --version | --versio | --versi | --vers | -V) - ac_init_version=: ;; - - -with-* | --with-*) - ac_useropt=`expr "x$ac_option" : 'x-*with-\([^=]*\)'` - # Reject names that are not valid shell variable names. - expr "x$ac_useropt" : ".*[^-+._$as_cr_alnum]" >/dev/null && - as_fn_error $? "invalid package name: $ac_useropt" - ac_useropt_orig=$ac_useropt - ac_useropt=`$as_echo "$ac_useropt" | sed 's/[-+.]/_/g'` - case $ac_user_opts in - *" -"with_$ac_useropt" -"*) ;; - *) ac_unrecognized_opts="$ac_unrecognized_opts$ac_unrecognized_sep--with-$ac_useropt_orig" - ac_unrecognized_sep=', ';; - esac - eval with_$ac_useropt=\$ac_optarg ;; - - -without-* | --without-*) - ac_useropt=`expr "x$ac_option" : 'x-*without-\(.*\)'` - # Reject names that are not valid shell variable names. - expr "x$ac_useropt" : ".*[^-+._$as_cr_alnum]" >/dev/null && - as_fn_error $? "invalid package name: $ac_useropt" - ac_useropt_orig=$ac_useropt - ac_useropt=`$as_echo "$ac_useropt" | sed 's/[-+.]/_/g'` - case $ac_user_opts in - *" -"with_$ac_useropt" -"*) ;; - *) ac_unrecognized_opts="$ac_unrecognized_opts$ac_unrecognized_sep--without-$ac_useropt_orig" - ac_unrecognized_sep=', ';; - esac - eval with_$ac_useropt=no ;; - - --x) - # Obsolete; use --with-x. - with_x=yes ;; - - -x-includes | --x-includes | --x-include | --x-includ | --x-inclu \ - | --x-incl | --x-inc | --x-in | --x-i) - ac_prev=x_includes ;; - -x-includes=* | --x-includes=* | --x-include=* | --x-includ=* | --x-inclu=* \ - | --x-incl=* | --x-inc=* | --x-in=* | --x-i=*) - x_includes=$ac_optarg ;; - - -x-libraries | --x-libraries | --x-librarie | --x-librari \ - | --x-librar | --x-libra | --x-libr | --x-lib | --x-li | --x-l) - ac_prev=x_libraries ;; - -x-libraries=* | --x-libraries=* | --x-librarie=* | --x-librari=* \ - | --x-librar=* | --x-libra=* | --x-libr=* | --x-lib=* | --x-li=* | --x-l=*) - x_libraries=$ac_optarg ;; - - -*) as_fn_error $? "unrecognized option: \`$ac_option' -Try \`$0 --help' for more information" - ;; - - *=*) - ac_envvar=`expr "x$ac_option" : 'x\([^=]*\)='` - # Reject names that are not valid shell variable names. - case $ac_envvar in #( - '' | [0-9]* | *[!_$as_cr_alnum]* ) - as_fn_error $? "invalid variable name: \`$ac_envvar'" ;; - esac - eval $ac_envvar=\$ac_optarg - export $ac_envvar ;; - - *) - # FIXME: should be removed in autoconf 3.0. - $as_echo "$as_me: WARNING: you should use --build, --host, --target" >&2 - expr "x$ac_option" : ".*[^-._$as_cr_alnum]" >/dev/null && - $as_echo "$as_me: WARNING: invalid host type: $ac_option" >&2 - : "${build_alias=$ac_option} ${host_alias=$ac_option} ${target_alias=$ac_option}" - ;; - - esac -done - -if test -n "$ac_prev"; then - ac_option=--`echo $ac_prev | sed 's/_/-/g'` - as_fn_error $? "missing argument to $ac_option" -fi - -if test -n "$ac_unrecognized_opts"; then - case $enable_option_checking in - no) ;; - fatal) as_fn_error $? "unrecognized options: $ac_unrecognized_opts" ;; - *) $as_echo "$as_me: WARNING: unrecognized options: $ac_unrecognized_opts" >&2 ;; - esac -fi - -# Check all directory arguments for consistency. -for ac_var in exec_prefix prefix bindir sbindir libexecdir datarootdir \ - datadir sysconfdir sharedstatedir localstatedir includedir \ - oldincludedir docdir infodir htmldir dvidir pdfdir psdir \ - libdir localedir mandir -do - eval ac_val=\$$ac_var - # Remove trailing slashes. - case $ac_val in - */ ) - ac_val=`expr "X$ac_val" : 'X\(.*[^/]\)' \| "X$ac_val" : 'X\(.*\)'` - eval $ac_var=\$ac_val;; - esac - # Be sure to have absolute directory names. - case $ac_val in - [\\/$]* | ?:[\\/]* ) continue;; - NONE | '' ) case $ac_var in *prefix ) continue;; esac;; - esac - as_fn_error $? "expected an absolute directory name for --$ac_var: $ac_val" -done - -# There might be people who depend on the old broken behavior: `$host' -# used to hold the argument of --host etc. -# FIXME: To remove some day. -build=$build_alias -host=$host_alias -target=$target_alias - -# FIXME: To remove some day. -if test "x$host_alias" != x; then - if test "x$build_alias" = x; then - cross_compiling=maybe - elif test "x$build_alias" != "x$host_alias"; then - cross_compiling=yes - fi -fi - -ac_tool_prefix= -test -n "$host_alias" && ac_tool_prefix=$host_alias- - -test "$silent" = yes && exec 6>/dev/null - - -ac_pwd=`pwd` && test -n "$ac_pwd" && -ac_ls_di=`ls -di .` && -ac_pwd_ls_di=`cd "$ac_pwd" && ls -di .` || - as_fn_error $? "working directory cannot be determined" -test "X$ac_ls_di" = "X$ac_pwd_ls_di" || - as_fn_error $? "pwd does not report name of working directory" - - -# Find the source files, if location was not specified. -if test -z "$srcdir"; then - ac_srcdir_defaulted=yes - # Try the directory containing this script, then the parent directory. - ac_confdir=`$as_dirname -- "$as_myself" || -$as_expr X"$as_myself" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \ - X"$as_myself" : 'X\(//\)[^/]' \| \ - X"$as_myself" : 'X\(//\)$' \| \ - X"$as_myself" : 'X\(/\)' \| . 2>/dev/null || -$as_echo X"$as_myself" | - sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ - s//\1/ - q - } - /^X\(\/\/\)[^/].*/{ - s//\1/ - q - } - /^X\(\/\/\)$/{ - s//\1/ - q - } - /^X\(\/\).*/{ - s//\1/ - q - } - s/.*/./; q'` - srcdir=$ac_confdir - if test ! -r "$srcdir/$ac_unique_file"; then - srcdir=.. - fi -else - ac_srcdir_defaulted=no -fi -if test ! -r "$srcdir/$ac_unique_file"; then - test "$ac_srcdir_defaulted" = yes && srcdir="$ac_confdir or .." - as_fn_error $? "cannot find sources ($ac_unique_file) in $srcdir" -fi -ac_msg="sources are in $srcdir, but \`cd $srcdir' does not work" -ac_abs_confdir=`( - cd "$srcdir" && test -r "./$ac_unique_file" || as_fn_error $? "$ac_msg" - pwd)` -# When building in place, set srcdir=. -if test "$ac_abs_confdir" = "$ac_pwd"; then - srcdir=. -fi -# Remove unnecessary trailing slashes from srcdir. -# Double slashes in file names in object file debugging info -# mess up M-x gdb in Emacs. -case $srcdir in -*/) srcdir=`expr "X$srcdir" : 'X\(.*[^/]\)' \| "X$srcdir" : 'X\(.*\)'`;; -esac -for ac_var in $ac_precious_vars; do - eval ac_env_${ac_var}_set=\${${ac_var}+set} - eval ac_env_${ac_var}_value=\$${ac_var} - eval ac_cv_env_${ac_var}_set=\${${ac_var}+set} - eval ac_cv_env_${ac_var}_value=\$${ac_var} -done - -# -# Report the --help message. -# -if test "$ac_init_help" = "long"; then - # Omit some internal or obsolete options to make the list less imposing. - # This message is too long to be a string in the A/UX 3.1 sh. - cat <<_ACEOF -\`configure' configures autohello 1.1 to adapt to many kinds of systems. - -Usage: $0 [OPTION]... [VAR=VALUE]... - -To assign environment variables (e.g., CC, CFLAGS...), specify them as -VAR=VALUE. See below for descriptions of some of the useful variables. - -Defaults for the options are specified in brackets. - -Configuration: - -h, --help display this help and exit - --help=short display options specific to this package - --help=recursive display the short help of all the included packages - -V, --version display version information and exit - -q, --quiet, --silent do not print \`checking ...' messages - --cache-file=FILE cache test results in FILE [disabled] - -C, --config-cache alias for \`--cache-file=config.cache' - -n, --no-create do not create output files - --srcdir=DIR find the sources in DIR [configure dir or \`..'] - -Installation directories: - --prefix=PREFIX install architecture-independent files in PREFIX - [$ac_default_prefix] - --exec-prefix=EPREFIX install architecture-dependent files in EPREFIX - [PREFIX] - -By default, \`make install' will install all the files in -\`$ac_default_prefix/bin', \`$ac_default_prefix/lib' etc. You can specify -an installation prefix other than \`$ac_default_prefix' using \`--prefix', -for instance \`--prefix=\$HOME'. - -For better control, use the options below. - -Fine tuning of the installation directories: - --bindir=DIR user executables [EPREFIX/bin] - --sbindir=DIR system admin executables [EPREFIX/sbin] - --libexecdir=DIR program executables [EPREFIX/libexec] - --sysconfdir=DIR read-only single-machine data [PREFIX/etc] - --sharedstatedir=DIR modifiable architecture-independent data [PREFIX/com] - --localstatedir=DIR modifiable single-machine data [PREFIX/var] - --libdir=DIR object code libraries [EPREFIX/lib] - --includedir=DIR C header files [PREFIX/include] - --oldincludedir=DIR C header files for non-gcc [/usr/include] - --datarootdir=DIR read-only arch.-independent data root [PREFIX/share] - --datadir=DIR read-only architecture-independent data [DATAROOTDIR] - --infodir=DIR info documentation [DATAROOTDIR/info] - --localedir=DIR locale-dependent data [DATAROOTDIR/locale] - --mandir=DIR man documentation [DATAROOTDIR/man] - --docdir=DIR documentation root [DATAROOTDIR/doc/autohello] - --htmldir=DIR html documentation [DOCDIR] - --dvidir=DIR dvi documentation [DOCDIR] - --pdfdir=DIR pdf documentation [DOCDIR] - --psdir=DIR ps documentation [DOCDIR] -_ACEOF - - cat <<\_ACEOF - -Program names: - --program-prefix=PREFIX prepend PREFIX to installed program names - --program-suffix=SUFFIX append SUFFIX to installed program names - --program-transform-name=PROGRAM run sed PROGRAM on installed program names -_ACEOF -fi - -if test -n "$ac_init_help"; then - case $ac_init_help in - short | recursive ) echo "Configuration of autohello 1.1:";; - esac - cat <<\_ACEOF - -Optional Features: - --disable-option-checking ignore unrecognized --enable/--with options - --disable-FEATURE do not include FEATURE (same as --enable-FEATURE=no) - --enable-FEATURE[=ARG] include FEATURE [ARG=yes] - --enable-silent-rules less verbose build output (undo: "make V=1") - --disable-silent-rules verbose build output (undo: "make V=0") - --enable-dependency-tracking - do not reject slow dependency extractors - --disable-dependency-tracking - speeds up one-time build - -Some influential environment variables: - CC C compiler command - CFLAGS C compiler flags - LDFLAGS linker flags, e.g. -L if you have libraries in a - nonstandard directory - LIBS libraries to pass to the linker, e.g. -l - CPPFLAGS (Objective) C/C++ preprocessor flags, e.g. -I if - you have headers in a nonstandard directory - -Use these variables to override the choices made by `configure' or to help -it to find libraries and programs with nonstandard names/locations. - -Report bugs to . -_ACEOF -ac_status=$? -fi - -if test "$ac_init_help" = "recursive"; then - # If there are subdirs, report their specific --help. - for ac_dir in : $ac_subdirs_all; do test "x$ac_dir" = x: && continue - test -d "$ac_dir" || - { cd "$srcdir" && ac_pwd=`pwd` && srcdir=. && test -d "$ac_dir"; } || - continue - ac_builddir=. - -case "$ac_dir" in -.) ac_dir_suffix= ac_top_builddir_sub=. ac_top_build_prefix= ;; -*) - ac_dir_suffix=/`$as_echo "$ac_dir" | sed 's|^\.[\\/]||'` - # A ".." for each directory in $ac_dir_suffix. - ac_top_builddir_sub=`$as_echo "$ac_dir_suffix" | sed 's|/[^\\/]*|/..|g;s|/||'` - case $ac_top_builddir_sub in - "") ac_top_builddir_sub=. ac_top_build_prefix= ;; - *) ac_top_build_prefix=$ac_top_builddir_sub/ ;; - esac ;; -esac -ac_abs_top_builddir=$ac_pwd -ac_abs_builddir=$ac_pwd$ac_dir_suffix -# for backward compatibility: -ac_top_builddir=$ac_top_build_prefix - -case $srcdir in - .) # We are building in place. - ac_srcdir=. - ac_top_srcdir=$ac_top_builddir_sub - ac_abs_top_srcdir=$ac_pwd ;; - [\\/]* | ?:[\\/]* ) # Absolute name. - ac_srcdir=$srcdir$ac_dir_suffix; - ac_top_srcdir=$srcdir - ac_abs_top_srcdir=$srcdir ;; - *) # Relative name. - ac_srcdir=$ac_top_build_prefix$srcdir$ac_dir_suffix - ac_top_srcdir=$ac_top_build_prefix$srcdir - ac_abs_top_srcdir=$ac_pwd/$srcdir ;; -esac -ac_abs_srcdir=$ac_abs_top_srcdir$ac_dir_suffix - - cd "$ac_dir" || { ac_status=$?; continue; } - # Check for guested configure. - if test -f "$ac_srcdir/configure.gnu"; then - echo && - $SHELL "$ac_srcdir/configure.gnu" --help=recursive - elif test -f "$ac_srcdir/configure"; then - echo && - $SHELL "$ac_srcdir/configure" --help=recursive - else - $as_echo "$as_me: WARNING: no configuration information is in $ac_dir" >&2 - fi || ac_status=$? - cd "$ac_pwd" || { ac_status=$?; break; } - done -fi - -test -n "$ac_init_help" && exit $ac_status -if $ac_init_version; then - cat <<\_ACEOF -autohello configure 1.1 -generated by GNU Autoconf 2.69 - -Copyright (C) 2012 Free Software Foundation, Inc. -This configure script is free software; the Free Software Foundation -gives unlimited permission to copy, distribute and modify it. -_ACEOF - exit -fi - -## ------------------------ ## -## Autoconf initialization. ## -## ------------------------ ## - -# ac_fn_c_try_compile LINENO -# -------------------------- -# Try to compile conftest.$ac_ext, and return whether this succeeded. -ac_fn_c_try_compile () -{ - as_lineno=${as_lineno-"$1"} as_lineno_stack=as_lineno_stack=$as_lineno_stack - rm -f conftest.$ac_objext - if { { ac_try="$ac_compile" -case "(($ac_try" in - *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; - *) ac_try_echo=$ac_try;; -esac -eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\"" -$as_echo "$ac_try_echo"; } >&5 - (eval "$ac_compile") 2>conftest.err - ac_status=$? - if test -s conftest.err; then - grep -v '^ *+' conftest.err >conftest.er1 - cat conftest.er1 >&5 - mv -f conftest.er1 conftest.err - fi - $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 - test $ac_status = 0; } && { - test -z "$ac_c_werror_flag" || - test ! -s conftest.err - } && test -s conftest.$ac_objext; then : - ac_retval=0 -else - $as_echo "$as_me: failed program was:" >&5 -sed 's/^/| /' conftest.$ac_ext >&5 - - ac_retval=1 -fi - eval $as_lineno_stack; ${as_lineno_stack:+:} unset as_lineno - as_fn_set_status $ac_retval - -} # ac_fn_c_try_compile -cat >config.log <<_ACEOF -This file contains any messages produced by compilers while -running configure, to aid debugging if configure makes a mistake. - -It was created by autohello $as_me 1.1, which was -generated by GNU Autoconf 2.69. Invocation command line was - - $ $0 $@ - -_ACEOF -exec 5>>config.log -{ -cat <<_ASUNAME -## --------- ## -## Platform. ## -## --------- ## - -hostname = `(hostname || uname -n) 2>/dev/null | sed 1q` -uname -m = `(uname -m) 2>/dev/null || echo unknown` -uname -r = `(uname -r) 2>/dev/null || echo unknown` -uname -s = `(uname -s) 2>/dev/null || echo unknown` -uname -v = `(uname -v) 2>/dev/null || echo unknown` - -/usr/bin/uname -p = `(/usr/bin/uname -p) 2>/dev/null || echo unknown` -/bin/uname -X = `(/bin/uname -X) 2>/dev/null || echo unknown` - -/bin/arch = `(/bin/arch) 2>/dev/null || echo unknown` -/usr/bin/arch -k = `(/usr/bin/arch -k) 2>/dev/null || echo unknown` -/usr/convex/getsysinfo = `(/usr/convex/getsysinfo) 2>/dev/null || echo unknown` -/usr/bin/hostinfo = `(/usr/bin/hostinfo) 2>/dev/null || echo unknown` -/bin/machine = `(/bin/machine) 2>/dev/null || echo unknown` -/usr/bin/oslevel = `(/usr/bin/oslevel) 2>/dev/null || echo unknown` -/bin/universe = `(/bin/universe) 2>/dev/null || echo unknown` - -_ASUNAME - -as_save_IFS=$IFS; IFS=$PATH_SEPARATOR -for as_dir in $PATH -do - IFS=$as_save_IFS - test -z "$as_dir" && as_dir=. - $as_echo "PATH: $as_dir" - done -IFS=$as_save_IFS - -} >&5 - -cat >&5 <<_ACEOF - - -## ----------- ## -## Core tests. ## -## ----------- ## - -_ACEOF - - -# Keep a trace of the command line. -# Strip out --no-create and --no-recursion so they do not pile up. -# Strip out --silent because we don't want to record it for future runs. -# Also quote any args containing shell meta-characters. -# Make two passes to allow for proper duplicate-argument suppression. -ac_configure_args= -ac_configure_args0= -ac_configure_args1= -ac_must_keep_next=false -for ac_pass in 1 2 -do - for ac_arg - do - case $ac_arg in - -no-create | --no-c* | -n | -no-recursion | --no-r*) continue ;; - -q | -quiet | --quiet | --quie | --qui | --qu | --q \ - | -silent | --silent | --silen | --sile | --sil) - continue ;; - *\'*) - ac_arg=`$as_echo "$ac_arg" | sed "s/'/'\\\\\\\\''/g"` ;; - esac - case $ac_pass in - 1) as_fn_append ac_configure_args0 " '$ac_arg'" ;; - 2) - as_fn_append ac_configure_args1 " '$ac_arg'" - if test $ac_must_keep_next = true; then - ac_must_keep_next=false # Got value, back to normal. - else - case $ac_arg in - *=* | --config-cache | -C | -disable-* | --disable-* \ - | -enable-* | --enable-* | -gas | --g* | -nfp | --nf* \ - | -q | -quiet | --q* | -silent | --sil* | -v | -verb* \ - | -with-* | --with-* | -without-* | --without-* | --x) - case "$ac_configure_args0 " in - "$ac_configure_args1"*" '$ac_arg' "* ) continue ;; - esac - ;; - -* ) ac_must_keep_next=true ;; - esac - fi - as_fn_append ac_configure_args " '$ac_arg'" - ;; - esac - done -done -{ ac_configure_args0=; unset ac_configure_args0;} -{ ac_configure_args1=; unset ac_configure_args1;} - -# When interrupted or exit'd, cleanup temporary files, and complete -# config.log. We remove comments because anyway the quotes in there -# would cause problems or look ugly. -# WARNING: Use '\'' to represent an apostrophe within the trap. -# WARNING: Do not start the trap code with a newline, due to a FreeBSD 4.0 bug. -trap 'exit_status=$? - # Save into config.log some information that might help in debugging. - { - echo - - $as_echo "## ---------------- ## -## Cache variables. ## -## ---------------- ##" - echo - # The following way of writing the cache mishandles newlines in values, -( - for ac_var in `(set) 2>&1 | sed -n '\''s/^\([a-zA-Z_][a-zA-Z0-9_]*\)=.*/\1/p'\''`; do - eval ac_val=\$$ac_var - case $ac_val in #( - *${as_nl}*) - case $ac_var in #( - *_cv_*) { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: cache variable $ac_var contains a newline" >&5 -$as_echo "$as_me: WARNING: cache variable $ac_var contains a newline" >&2;} ;; - esac - case $ac_var in #( - _ | IFS | as_nl) ;; #( - BASH_ARGV | BASH_SOURCE) eval $ac_var= ;; #( - *) { eval $ac_var=; unset $ac_var;} ;; - esac ;; - esac - done - (set) 2>&1 | - case $as_nl`(ac_space='\'' '\''; set) 2>&1` in #( - *${as_nl}ac_space=\ *) - sed -n \ - "s/'\''/'\''\\\\'\'''\''/g; - s/^\\([_$as_cr_alnum]*_cv_[_$as_cr_alnum]*\\)=\\(.*\\)/\\1='\''\\2'\''/p" - ;; #( - *) - sed -n "/^[_$as_cr_alnum]*_cv_[_$as_cr_alnum]*=/p" - ;; - esac | - sort -) - echo - - $as_echo "## ----------------- ## -## Output variables. ## -## ----------------- ##" - echo - for ac_var in $ac_subst_vars - do - eval ac_val=\$$ac_var - case $ac_val in - *\'\''*) ac_val=`$as_echo "$ac_val" | sed "s/'\''/'\''\\\\\\\\'\'''\''/g"`;; - esac - $as_echo "$ac_var='\''$ac_val'\''" - done | sort - echo - - if test -n "$ac_subst_files"; then - $as_echo "## ------------------- ## -## File substitutions. ## -## ------------------- ##" - echo - for ac_var in $ac_subst_files - do - eval ac_val=\$$ac_var - case $ac_val in - *\'\''*) ac_val=`$as_echo "$ac_val" | sed "s/'\''/'\''\\\\\\\\'\'''\''/g"`;; - esac - $as_echo "$ac_var='\''$ac_val'\''" - done | sort - echo - fi - - if test -s confdefs.h; then - $as_echo "## ----------- ## -## confdefs.h. ## -## ----------- ##" - echo - cat confdefs.h - echo - fi - test "$ac_signal" != 0 && - $as_echo "$as_me: caught signal $ac_signal" - $as_echo "$as_me: exit $exit_status" - } >&5 - rm -f core *.core core.conftest.* && - rm -f -r conftest* confdefs* conf$$* $ac_clean_files && - exit $exit_status -' 0 -for ac_signal in 1 2 13 15; do - trap 'ac_signal='$ac_signal'; as_fn_exit 1' $ac_signal -done -ac_signal=0 - -# confdefs.h avoids OS command line length limits that DEFS can exceed. -rm -f -r conftest* confdefs.h - -$as_echo "/* confdefs.h */" > confdefs.h - -# Predefined preprocessor variables. - -cat >>confdefs.h <<_ACEOF -#define PACKAGE_NAME "$PACKAGE_NAME" -_ACEOF - -cat >>confdefs.h <<_ACEOF -#define PACKAGE_TARNAME "$PACKAGE_TARNAME" -_ACEOF - -cat >>confdefs.h <<_ACEOF -#define PACKAGE_VERSION "$PACKAGE_VERSION" -_ACEOF - -cat >>confdefs.h <<_ACEOF -#define PACKAGE_STRING "$PACKAGE_STRING" -_ACEOF - -cat >>confdefs.h <<_ACEOF -#define PACKAGE_BUGREPORT "$PACKAGE_BUGREPORT" -_ACEOF - -cat >>confdefs.h <<_ACEOF -#define PACKAGE_URL "$PACKAGE_URL" -_ACEOF - - -# Let the site file select an alternate cache file if it wants to. -# Prefer an explicitly selected file to automatically selected ones. -ac_site_file1=NONE -ac_site_file2=NONE -if test -n "$CONFIG_SITE"; then - # We do not want a PATH search for config.site. - case $CONFIG_SITE in #(( - -*) ac_site_file1=./$CONFIG_SITE;; - */*) ac_site_file1=$CONFIG_SITE;; - *) ac_site_file1=./$CONFIG_SITE;; - esac -elif test "x$prefix" != xNONE; then - ac_site_file1=$prefix/share/config.site - ac_site_file2=$prefix/etc/config.site -else - ac_site_file1=$ac_default_prefix/share/config.site - ac_site_file2=$ac_default_prefix/etc/config.site -fi -for ac_site_file in "$ac_site_file1" "$ac_site_file2" -do - test "x$ac_site_file" = xNONE && continue - if test /dev/null != "$ac_site_file" && test -r "$ac_site_file"; then - { $as_echo "$as_me:${as_lineno-$LINENO}: loading site script $ac_site_file" >&5 -$as_echo "$as_me: loading site script $ac_site_file" >&6;} - sed 's/^/| /' "$ac_site_file" >&5 - . "$ac_site_file" \ - || { { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5 -$as_echo "$as_me: error: in \`$ac_pwd':" >&2;} -as_fn_error $? "failed to load site script $ac_site_file -See \`config.log' for more details" "$LINENO" 5; } - fi -done - -if test -r "$cache_file"; then - # Some versions of bash will fail to source /dev/null (special files - # actually), so we avoid doing that. DJGPP emulates it as a regular file. - if test /dev/null != "$cache_file" && test -f "$cache_file"; then - { $as_echo "$as_me:${as_lineno-$LINENO}: loading cache $cache_file" >&5 -$as_echo "$as_me: loading cache $cache_file" >&6;} - case $cache_file in - [\\/]* | ?:[\\/]* ) . "$cache_file";; - *) . "./$cache_file";; - esac - fi -else - { $as_echo "$as_me:${as_lineno-$LINENO}: creating cache $cache_file" >&5 -$as_echo "$as_me: creating cache $cache_file" >&6;} - >$cache_file -fi - -# Check that the precious variables saved in the cache have kept the same -# value. -ac_cache_corrupted=false -for ac_var in $ac_precious_vars; do - eval ac_old_set=\$ac_cv_env_${ac_var}_set - eval ac_new_set=\$ac_env_${ac_var}_set - eval ac_old_val=\$ac_cv_env_${ac_var}_value - eval ac_new_val=\$ac_env_${ac_var}_value - case $ac_old_set,$ac_new_set in - set,) - { $as_echo "$as_me:${as_lineno-$LINENO}: error: \`$ac_var' was set to \`$ac_old_val' in the previous run" >&5 -$as_echo "$as_me: error: \`$ac_var' was set to \`$ac_old_val' in the previous run" >&2;} - ac_cache_corrupted=: ;; - ,set) - { $as_echo "$as_me:${as_lineno-$LINENO}: error: \`$ac_var' was not set in the previous run" >&5 -$as_echo "$as_me: error: \`$ac_var' was not set in the previous run" >&2;} - ac_cache_corrupted=: ;; - ,);; - *) - if test "x$ac_old_val" != "x$ac_new_val"; then - # differences in whitespace do not lead to failure. - ac_old_val_w=`echo x $ac_old_val` - ac_new_val_w=`echo x $ac_new_val` - if test "$ac_old_val_w" != "$ac_new_val_w"; then - { $as_echo "$as_me:${as_lineno-$LINENO}: error: \`$ac_var' has changed since the previous run:" >&5 -$as_echo "$as_me: error: \`$ac_var' has changed since the previous run:" >&2;} - ac_cache_corrupted=: - else - { $as_echo "$as_me:${as_lineno-$LINENO}: warning: ignoring whitespace changes in \`$ac_var' since the previous run:" >&5 -$as_echo "$as_me: warning: ignoring whitespace changes in \`$ac_var' since the previous run:" >&2;} - eval $ac_var=\$ac_old_val - fi - { $as_echo "$as_me:${as_lineno-$LINENO}: former value: \`$ac_old_val'" >&5 -$as_echo "$as_me: former value: \`$ac_old_val'" >&2;} - { $as_echo "$as_me:${as_lineno-$LINENO}: current value: \`$ac_new_val'" >&5 -$as_echo "$as_me: current value: \`$ac_new_val'" >&2;} - fi;; - esac - # Pass precious variables to config.status. - if test "$ac_new_set" = set; then - case $ac_new_val in - *\'*) ac_arg=$ac_var=`$as_echo "$ac_new_val" | sed "s/'/'\\\\\\\\''/g"` ;; - *) ac_arg=$ac_var=$ac_new_val ;; - esac - case " $ac_configure_args " in - *" '$ac_arg' "*) ;; # Avoid dups. Use of quotes ensures accuracy. - *) as_fn_append ac_configure_args " '$ac_arg'" ;; - esac - fi -done -if $ac_cache_corrupted; then - { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5 -$as_echo "$as_me: error: in \`$ac_pwd':" >&2;} - { $as_echo "$as_me:${as_lineno-$LINENO}: error: changes in the environment can compromise the build" >&5 -$as_echo "$as_me: error: changes in the environment can compromise the build" >&2;} - as_fn_error $? "run \`make distclean' and/or \`rm $cache_file' and start over" "$LINENO" 5 -fi -## -------------------- ## -## Main body of script. ## -## -------------------- ## - -ac_ext=c -ac_cpp='$CPP $CPPFLAGS' -ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5' -ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5' -ac_compiler_gnu=$ac_cv_c_compiler_gnu - - -am__api_version='1.14' - -ac_aux_dir= -for ac_dir in "$srcdir" "$srcdir/.." "$srcdir/../.."; do - if test -f "$ac_dir/install-sh"; then - ac_aux_dir=$ac_dir - ac_install_sh="$ac_aux_dir/install-sh -c" - break - elif test -f "$ac_dir/install.sh"; then - ac_aux_dir=$ac_dir - ac_install_sh="$ac_aux_dir/install.sh -c" - break - elif test -f "$ac_dir/shtool"; then - ac_aux_dir=$ac_dir - ac_install_sh="$ac_aux_dir/shtool install -c" - break - fi -done -if test -z "$ac_aux_dir"; then - as_fn_error $? "cannot find install-sh, install.sh, or shtool in \"$srcdir\" \"$srcdir/..\" \"$srcdir/../..\"" "$LINENO" 5 -fi - -# These three variables are undocumented and unsupported, -# and are intended to be withdrawn in a future Autoconf release. -# They can cause serious problems if a builder's source tree is in a directory -# whose full name contains unusual characters. -ac_config_guess="$SHELL $ac_aux_dir/config.guess" # Please don't use this var. -ac_config_sub="$SHELL $ac_aux_dir/config.sub" # Please don't use this var. -ac_configure="$SHELL $ac_aux_dir/configure" # Please don't use this var. - - -# Find a good install program. We prefer a C program (faster), -# so one script is as good as another. But avoid the broken or -# incompatible versions: -# SysV /etc/install, /usr/sbin/install -# SunOS /usr/etc/install -# IRIX /sbin/install -# AIX /bin/install -# AmigaOS /C/install, which installs bootblocks on floppy discs -# AIX 4 /usr/bin/installbsd, which doesn't work without a -g flag -# AFS /usr/afsws/bin/install, which mishandles nonexistent args -# SVR4 /usr/ucb/install, which tries to use the nonexistent group "staff" -# OS/2's system install, which has a completely different semantic -# ./install, which can be erroneously created by make from ./install.sh. -# Reject install programs that cannot install multiple files. -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for a BSD-compatible install" >&5 -$as_echo_n "checking for a BSD-compatible install... " >&6; } -if test -z "$INSTALL"; then -if ${ac_cv_path_install+:} false; then : - $as_echo_n "(cached) " >&6 -else - as_save_IFS=$IFS; IFS=$PATH_SEPARATOR -for as_dir in $PATH -do - IFS=$as_save_IFS - test -z "$as_dir" && as_dir=. - # Account for people who put trailing slashes in PATH elements. -case $as_dir/ in #(( - ./ | .// | /[cC]/* | \ - /etc/* | /usr/sbin/* | /usr/etc/* | /sbin/* | /usr/afsws/bin/* | \ - ?:[\\/]os2[\\/]install[\\/]* | ?:[\\/]OS2[\\/]INSTALL[\\/]* | \ - /usr/ucb/* ) ;; - *) - # OSF1 and SCO ODT 3.0 have their own names for install. - # Don't use installbsd from OSF since it installs stuff as root - # by default. - for ac_prog in ginstall scoinst install; do - for ac_exec_ext in '' $ac_executable_extensions; do - if as_fn_executable_p "$as_dir/$ac_prog$ac_exec_ext"; then - if test $ac_prog = install && - grep dspmsg "$as_dir/$ac_prog$ac_exec_ext" >/dev/null 2>&1; then - # AIX install. It has an incompatible calling convention. - : - elif test $ac_prog = install && - grep pwplus "$as_dir/$ac_prog$ac_exec_ext" >/dev/null 2>&1; then - # program-specific install script used by HP pwplus--don't use. - : - else - rm -rf conftest.one conftest.two conftest.dir - echo one > conftest.one - echo two > conftest.two - mkdir conftest.dir - if "$as_dir/$ac_prog$ac_exec_ext" -c conftest.one conftest.two "`pwd`/conftest.dir" && - test -s conftest.one && test -s conftest.two && - test -s conftest.dir/conftest.one && - test -s conftest.dir/conftest.two - then - ac_cv_path_install="$as_dir/$ac_prog$ac_exec_ext -c" - break 3 - fi - fi - fi - done - done - ;; -esac - - done -IFS=$as_save_IFS - -rm -rf conftest.one conftest.two conftest.dir - -fi - if test "${ac_cv_path_install+set}" = set; then - INSTALL=$ac_cv_path_install - else - # As a last resort, use the slow shell script. Don't cache a - # value for INSTALL within a source directory, because that will - # break other packages using the cache if that directory is - # removed, or if the value is a relative name. - INSTALL=$ac_install_sh - fi -fi -{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $INSTALL" >&5 -$as_echo "$INSTALL" >&6; } - -# Use test -z because SunOS4 sh mishandles braces in ${var-val}. -# It thinks the first close brace ends the variable substitution. -test -z "$INSTALL_PROGRAM" && INSTALL_PROGRAM='${INSTALL}' - -test -z "$INSTALL_SCRIPT" && INSTALL_SCRIPT='${INSTALL}' - -test -z "$INSTALL_DATA" && INSTALL_DATA='${INSTALL} -m 644' - -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether build environment is sane" >&5 -$as_echo_n "checking whether build environment is sane... " >&6; } -# Reject unsafe characters in $srcdir or the absolute working directory -# name. Accept space and tab only in the latter. -am_lf=' -' -case `pwd` in - *[\\\"\#\$\&\'\`$am_lf]*) - as_fn_error $? "unsafe absolute working directory name" "$LINENO" 5;; -esac -case $srcdir in - *[\\\"\#\$\&\'\`$am_lf\ \ ]*) - as_fn_error $? "unsafe srcdir value: '$srcdir'" "$LINENO" 5;; -esac - -# Do 'set' in a subshell so we don't clobber the current shell's -# arguments. Must try -L first in case configure is actually a -# symlink; some systems play weird games with the mod time of symlinks -# (eg FreeBSD returns the mod time of the symlink's containing -# directory). -if ( - am_has_slept=no - for am_try in 1 2; do - echo "timestamp, slept: $am_has_slept" > conftest.file - set X `ls -Lt "$srcdir/configure" conftest.file 2> /dev/null` - if test "$*" = "X"; then - # -L didn't work. - set X `ls -t "$srcdir/configure" conftest.file` - fi - if test "$*" != "X $srcdir/configure conftest.file" \ - && test "$*" != "X conftest.file $srcdir/configure"; then - - # If neither matched, then we have a broken ls. This can happen - # if, for instance, CONFIG_SHELL is bash and it inherits a - # broken ls alias from the environment. This has actually - # happened. Such a system could not be considered "sane". - as_fn_error $? "ls -t appears to fail. Make sure there is not a broken - alias in your environment" "$LINENO" 5 - fi - if test "$2" = conftest.file || test $am_try -eq 2; then - break - fi - # Just in case. - sleep 1 - am_has_slept=yes - done - test "$2" = conftest.file - ) -then - # Ok. - : -else - as_fn_error $? "newly created file is older than distributed files! -Check your system clock" "$LINENO" 5 -fi -{ $as_echo "$as_me:${as_lineno-$LINENO}: result: yes" >&5 -$as_echo "yes" >&6; } -# If we didn't sleep, we still need to ensure time stamps of config.status and -# generated files are strictly newer. -am_sleep_pid= -if grep 'slept: no' conftest.file >/dev/null 2>&1; then - ( sleep 1 ) & - am_sleep_pid=$! -fi - -rm -f conftest.file - -test "$program_prefix" != NONE && - program_transform_name="s&^&$program_prefix&;$program_transform_name" -# Use a double $ so make ignores it. -test "$program_suffix" != NONE && - program_transform_name="s&\$&$program_suffix&;$program_transform_name" -# Double any \ or $. -# By default was `s,x,x', remove it if useless. -ac_script='s/[\\$]/&&/g;s/;s,x,x,$//' -program_transform_name=`$as_echo "$program_transform_name" | sed "$ac_script"` - -# expand $ac_aux_dir to an absolute path -am_aux_dir=`cd $ac_aux_dir && pwd` - -if test x"${MISSING+set}" != xset; then - case $am_aux_dir in - *\ * | *\ *) - MISSING="\${SHELL} \"$am_aux_dir/missing\"" ;; - *) - MISSING="\${SHELL} $am_aux_dir/missing" ;; - esac -fi -# Use eval to expand $SHELL -if eval "$MISSING --is-lightweight"; then - am_missing_run="$MISSING " -else - am_missing_run= - { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: 'missing' script is too old or missing" >&5 -$as_echo "$as_me: WARNING: 'missing' script is too old or missing" >&2;} -fi - -if test x"${install_sh}" != xset; then - case $am_aux_dir in - *\ * | *\ *) - install_sh="\${SHELL} '$am_aux_dir/install-sh'" ;; - *) - install_sh="\${SHELL} $am_aux_dir/install-sh" - esac -fi - -# Installed binaries are usually stripped using 'strip' when the user -# run "make install-strip". However 'strip' might not be the right -# tool to use in cross-compilation environments, therefore Automake -# will honor the 'STRIP' environment variable to overrule this program. -if test "$cross_compiling" != no; then - if test -n "$ac_tool_prefix"; then - # Extract the first word of "${ac_tool_prefix}strip", so it can be a program name with args. -set dummy ${ac_tool_prefix}strip; ac_word=$2 -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 -$as_echo_n "checking for $ac_word... " >&6; } -if ${ac_cv_prog_STRIP+:} false; then : - $as_echo_n "(cached) " >&6 -else - if test -n "$STRIP"; then - ac_cv_prog_STRIP="$STRIP" # Let the user override the test. -else -as_save_IFS=$IFS; IFS=$PATH_SEPARATOR -for as_dir in $PATH -do - IFS=$as_save_IFS - test -z "$as_dir" && as_dir=. - for ac_exec_ext in '' $ac_executable_extensions; do - if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then - ac_cv_prog_STRIP="${ac_tool_prefix}strip" - $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 - break 2 - fi -done - done -IFS=$as_save_IFS - -fi -fi -STRIP=$ac_cv_prog_STRIP -if test -n "$STRIP"; then - { $as_echo "$as_me:${as_lineno-$LINENO}: result: $STRIP" >&5 -$as_echo "$STRIP" >&6; } -else - { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 -$as_echo "no" >&6; } -fi - - -fi -if test -z "$ac_cv_prog_STRIP"; then - ac_ct_STRIP=$STRIP - # Extract the first word of "strip", so it can be a program name with args. -set dummy strip; ac_word=$2 -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 -$as_echo_n "checking for $ac_word... " >&6; } -if ${ac_cv_prog_ac_ct_STRIP+:} false; then : - $as_echo_n "(cached) " >&6 -else - if test -n "$ac_ct_STRIP"; then - ac_cv_prog_ac_ct_STRIP="$ac_ct_STRIP" # Let the user override the test. -else -as_save_IFS=$IFS; IFS=$PATH_SEPARATOR -for as_dir in $PATH -do - IFS=$as_save_IFS - test -z "$as_dir" && as_dir=. - for ac_exec_ext in '' $ac_executable_extensions; do - if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then - ac_cv_prog_ac_ct_STRIP="strip" - $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 - break 2 - fi -done - done -IFS=$as_save_IFS - -fi -fi -ac_ct_STRIP=$ac_cv_prog_ac_ct_STRIP -if test -n "$ac_ct_STRIP"; then - { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_ct_STRIP" >&5 -$as_echo "$ac_ct_STRIP" >&6; } -else - { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 -$as_echo "no" >&6; } -fi - - if test "x$ac_ct_STRIP" = x; then - STRIP=":" - else - case $cross_compiling:$ac_tool_warned in -yes:) -{ $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5 -$as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;} -ac_tool_warned=yes ;; -esac - STRIP=$ac_ct_STRIP - fi -else - STRIP="$ac_cv_prog_STRIP" -fi - -fi -INSTALL_STRIP_PROGRAM="\$(install_sh) -c -s" - -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for a thread-safe mkdir -p" >&5 -$as_echo_n "checking for a thread-safe mkdir -p... " >&6; } -if test -z "$MKDIR_P"; then - if ${ac_cv_path_mkdir+:} false; then : - $as_echo_n "(cached) " >&6 -else - as_save_IFS=$IFS; IFS=$PATH_SEPARATOR -for as_dir in $PATH$PATH_SEPARATOR/opt/sfw/bin -do - IFS=$as_save_IFS - test -z "$as_dir" && as_dir=. - for ac_prog in mkdir gmkdir; do - for ac_exec_ext in '' $ac_executable_extensions; do - as_fn_executable_p "$as_dir/$ac_prog$ac_exec_ext" || continue - case `"$as_dir/$ac_prog$ac_exec_ext" --version 2>&1` in #( - 'mkdir (GNU coreutils) '* | \ - 'mkdir (coreutils) '* | \ - 'mkdir (fileutils) '4.1*) - ac_cv_path_mkdir=$as_dir/$ac_prog$ac_exec_ext - break 3;; - esac - done - done - done -IFS=$as_save_IFS - -fi - - test -d ./--version && rmdir ./--version - if test "${ac_cv_path_mkdir+set}" = set; then - MKDIR_P="$ac_cv_path_mkdir -p" - else - # As a last resort, use the slow shell script. Don't cache a - # value for MKDIR_P within a source directory, because that will - # break other packages using the cache if that directory is - # removed, or if the value is a relative name. - MKDIR_P="$ac_install_sh -d" - fi -fi -{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $MKDIR_P" >&5 -$as_echo "$MKDIR_P" >&6; } - -for ac_prog in gawk mawk nawk awk -do - # Extract the first word of "$ac_prog", so it can be a program name with args. -set dummy $ac_prog; ac_word=$2 -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 -$as_echo_n "checking for $ac_word... " >&6; } -if ${ac_cv_prog_AWK+:} false; then : - $as_echo_n "(cached) " >&6 -else - if test -n "$AWK"; then - ac_cv_prog_AWK="$AWK" # Let the user override the test. -else -as_save_IFS=$IFS; IFS=$PATH_SEPARATOR -for as_dir in $PATH -do - IFS=$as_save_IFS - test -z "$as_dir" && as_dir=. - for ac_exec_ext in '' $ac_executable_extensions; do - if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then - ac_cv_prog_AWK="$ac_prog" - $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 - break 2 - fi -done - done -IFS=$as_save_IFS - -fi -fi -AWK=$ac_cv_prog_AWK -if test -n "$AWK"; then - { $as_echo "$as_me:${as_lineno-$LINENO}: result: $AWK" >&5 -$as_echo "$AWK" >&6; } -else - { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 -$as_echo "no" >&6; } -fi - - - test -n "$AWK" && break -done - -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether ${MAKE-make} sets \$(MAKE)" >&5 -$as_echo_n "checking whether ${MAKE-make} sets \$(MAKE)... " >&6; } -set x ${MAKE-make} -ac_make=`$as_echo "$2" | sed 's/+/p/g; s/[^a-zA-Z0-9_]/_/g'` -if eval \${ac_cv_prog_make_${ac_make}_set+:} false; then : - $as_echo_n "(cached) " >&6 -else - cat >conftest.make <<\_ACEOF -SHELL = /bin/sh -all: - @echo '@@@%%%=$(MAKE)=@@@%%%' -_ACEOF -# GNU make sometimes prints "make[1]: Entering ...", which would confuse us. -case `${MAKE-make} -f conftest.make 2>/dev/null` in - *@@@%%%=?*=@@@%%%*) - eval ac_cv_prog_make_${ac_make}_set=yes;; - *) - eval ac_cv_prog_make_${ac_make}_set=no;; -esac -rm -f conftest.make -fi -if eval test \$ac_cv_prog_make_${ac_make}_set = yes; then - { $as_echo "$as_me:${as_lineno-$LINENO}: result: yes" >&5 -$as_echo "yes" >&6; } - SET_MAKE= -else - { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 -$as_echo "no" >&6; } - SET_MAKE="MAKE=${MAKE-make}" -fi - -rm -rf .tst 2>/dev/null -mkdir .tst 2>/dev/null -if test -d .tst; then - am__leading_dot=. -else - am__leading_dot=_ -fi -rmdir .tst 2>/dev/null - -# Check whether --enable-silent-rules was given. -if test "${enable_silent_rules+set}" = set; then : - enableval=$enable_silent_rules; -fi - -case $enable_silent_rules in # ((( - yes) AM_DEFAULT_VERBOSITY=0;; - no) AM_DEFAULT_VERBOSITY=1;; - *) AM_DEFAULT_VERBOSITY=1;; -esac -am_make=${MAKE-make} -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether $am_make supports nested variables" >&5 -$as_echo_n "checking whether $am_make supports nested variables... " >&6; } -if ${am_cv_make_support_nested_variables+:} false; then : - $as_echo_n "(cached) " >&6 -else - if $as_echo 'TRUE=$(BAR$(V)) -BAR0=false -BAR1=true -V=1 -am__doit: - @$(TRUE) -.PHONY: am__doit' | $am_make -f - >/dev/null 2>&1; then - am_cv_make_support_nested_variables=yes -else - am_cv_make_support_nested_variables=no -fi -fi -{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $am_cv_make_support_nested_variables" >&5 -$as_echo "$am_cv_make_support_nested_variables" >&6; } -if test $am_cv_make_support_nested_variables = yes; then - AM_V='$(V)' - AM_DEFAULT_V='$(AM_DEFAULT_VERBOSITY)' -else - AM_V=$AM_DEFAULT_VERBOSITY - AM_DEFAULT_V=$AM_DEFAULT_VERBOSITY -fi -AM_BACKSLASH='\' - -if test "`cd $srcdir && pwd`" != "`pwd`"; then - # Use -I$(srcdir) only when $(srcdir) != ., so that make's output - # is not polluted with repeated "-I." - am__isrc=' -I$(srcdir)' - # test to see if srcdir already configured - if test -f $srcdir/config.status; then - as_fn_error $? "source directory already configured; run \"make distclean\" there first" "$LINENO" 5 - fi -fi - -# test whether we have cygpath -if test -z "$CYGPATH_W"; then - if (cygpath --version) >/dev/null 2>/dev/null; then - CYGPATH_W='cygpath -w' - else - CYGPATH_W=echo - fi -fi - - -# Define the identity of the package. - PACKAGE='autohello' - VERSION='1.1' - - -cat >>confdefs.h <<_ACEOF -#define PACKAGE "$PACKAGE" -_ACEOF - - -cat >>confdefs.h <<_ACEOF -#define VERSION "$VERSION" -_ACEOF - -# Some tools Automake needs. - -ACLOCAL=${ACLOCAL-"${am_missing_run}aclocal-${am__api_version}"} - - -AUTOCONF=${AUTOCONF-"${am_missing_run}autoconf"} - - -AUTOMAKE=${AUTOMAKE-"${am_missing_run}automake-${am__api_version}"} - - -AUTOHEADER=${AUTOHEADER-"${am_missing_run}autoheader"} - - -MAKEINFO=${MAKEINFO-"${am_missing_run}makeinfo"} - -# For better backward compatibility. To be removed once Automake 1.9.x -# dies out for good. For more background, see: -# -# -mkdir_p='$(MKDIR_P)' - -# We need awk for the "check" target. The system "awk" is bad on -# some platforms. -# Always define AMTAR for backward compatibility. Yes, it's still used -# in the wild :-( We should find a proper way to deprecate it ... -AMTAR='$${TAR-tar}' - - -# We'll loop over all known methods to create a tar archive until one works. -_am_tools='gnutar pax cpio none' - -am__tar='$${TAR-tar} chof - "$$tardir"' am__untar='$${TAR-tar} xf -' - - - - - - -# POSIX will say in a future version that running "rm -f" with no argument -# is OK; and we want to be able to make that assumption in our Makefile -# recipes. So use an aggressive probe to check that the usage we want is -# actually supported "in the wild" to an acceptable degree. -# See automake bug#10828. -# To make any issue more visible, cause the running configure to be aborted -# by default if the 'rm' program in use doesn't match our expectations; the -# user can still override this though. -if rm -f && rm -fr && rm -rf; then : OK; else - cat >&2 <<'END' -Oops! - -Your 'rm' program seems unable to run without file operands specified -on the command line, even when the '-f' option is present. This is contrary -to the behaviour of most rm programs out there, and not conforming with -the upcoming POSIX standard: - -Please tell bug-automake@gnu.org about your system, including the value -of your $PATH and any error possibly output before this message. This -can help us improve future automake versions. - -END - if test x"$ACCEPT_INFERIOR_RM_PROGRAM" = x"yes"; then - echo 'Configuration will proceed anyway, since you have set the' >&2 - echo 'ACCEPT_INFERIOR_RM_PROGRAM variable to "yes"' >&2 - echo >&2 - else - cat >&2 <<'END' -Aborting the configuration process, to ensure you take notice of the issue. - -You can download and install GNU coreutils to get an 'rm' implementation -that behaves properly: . - -If you want to complete the configuration process using your problematic -'rm' anyway, export the environment variable ACCEPT_INFERIOR_RM_PROGRAM -to "yes", and re-run configure. - -END - as_fn_error $? "Your 'rm' program is bad, sorry." "$LINENO" 5 - fi -fi - - -ac_config_headers="$ac_config_headers config.h" - - -# Checks for programs. -ac_ext=c -ac_cpp='$CPP $CPPFLAGS' -ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5' -ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5' -ac_compiler_gnu=$ac_cv_c_compiler_gnu -if test -n "$ac_tool_prefix"; then - # Extract the first word of "${ac_tool_prefix}gcc", so it can be a program name with args. -set dummy ${ac_tool_prefix}gcc; ac_word=$2 -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 -$as_echo_n "checking for $ac_word... " >&6; } -if ${ac_cv_prog_CC+:} false; then : - $as_echo_n "(cached) " >&6 -else - if test -n "$CC"; then - ac_cv_prog_CC="$CC" # Let the user override the test. -else -as_save_IFS=$IFS; IFS=$PATH_SEPARATOR -for as_dir in $PATH -do - IFS=$as_save_IFS - test -z "$as_dir" && as_dir=. - for ac_exec_ext in '' $ac_executable_extensions; do - if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then - ac_cv_prog_CC="${ac_tool_prefix}gcc" - $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 - break 2 - fi -done - done -IFS=$as_save_IFS - -fi -fi -CC=$ac_cv_prog_CC -if test -n "$CC"; then - { $as_echo "$as_me:${as_lineno-$LINENO}: result: $CC" >&5 -$as_echo "$CC" >&6; } -else - { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 -$as_echo "no" >&6; } -fi - - -fi -if test -z "$ac_cv_prog_CC"; then - ac_ct_CC=$CC - # Extract the first word of "gcc", so it can be a program name with args. -set dummy gcc; ac_word=$2 -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 -$as_echo_n "checking for $ac_word... " >&6; } -if ${ac_cv_prog_ac_ct_CC+:} false; then : - $as_echo_n "(cached) " >&6 -else - if test -n "$ac_ct_CC"; then - ac_cv_prog_ac_ct_CC="$ac_ct_CC" # Let the user override the test. -else -as_save_IFS=$IFS; IFS=$PATH_SEPARATOR -for as_dir in $PATH -do - IFS=$as_save_IFS - test -z "$as_dir" && as_dir=. - for ac_exec_ext in '' $ac_executable_extensions; do - if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then - ac_cv_prog_ac_ct_CC="gcc" - $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 - break 2 - fi -done - done -IFS=$as_save_IFS - -fi -fi -ac_ct_CC=$ac_cv_prog_ac_ct_CC -if test -n "$ac_ct_CC"; then - { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_ct_CC" >&5 -$as_echo "$ac_ct_CC" >&6; } -else - { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 -$as_echo "no" >&6; } -fi - - if test "x$ac_ct_CC" = x; then - CC="" - else - case $cross_compiling:$ac_tool_warned in -yes:) -{ $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5 -$as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;} -ac_tool_warned=yes ;; -esac - CC=$ac_ct_CC - fi -else - CC="$ac_cv_prog_CC" -fi - -if test -z "$CC"; then - if test -n "$ac_tool_prefix"; then - # Extract the first word of "${ac_tool_prefix}cc", so it can be a program name with args. -set dummy ${ac_tool_prefix}cc; ac_word=$2 -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 -$as_echo_n "checking for $ac_word... " >&6; } -if ${ac_cv_prog_CC+:} false; then : - $as_echo_n "(cached) " >&6 -else - if test -n "$CC"; then - ac_cv_prog_CC="$CC" # Let the user override the test. -else -as_save_IFS=$IFS; IFS=$PATH_SEPARATOR -for as_dir in $PATH -do - IFS=$as_save_IFS - test -z "$as_dir" && as_dir=. - for ac_exec_ext in '' $ac_executable_extensions; do - if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then - ac_cv_prog_CC="${ac_tool_prefix}cc" - $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 - break 2 - fi -done - done -IFS=$as_save_IFS - -fi -fi -CC=$ac_cv_prog_CC -if test -n "$CC"; then - { $as_echo "$as_me:${as_lineno-$LINENO}: result: $CC" >&5 -$as_echo "$CC" >&6; } -else - { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 -$as_echo "no" >&6; } -fi - - - fi -fi -if test -z "$CC"; then - # Extract the first word of "cc", so it can be a program name with args. -set dummy cc; ac_word=$2 -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 -$as_echo_n "checking for $ac_word... " >&6; } -if ${ac_cv_prog_CC+:} false; then : - $as_echo_n "(cached) " >&6 -else - if test -n "$CC"; then - ac_cv_prog_CC="$CC" # Let the user override the test. -else - ac_prog_rejected=no -as_save_IFS=$IFS; IFS=$PATH_SEPARATOR -for as_dir in $PATH -do - IFS=$as_save_IFS - test -z "$as_dir" && as_dir=. - for ac_exec_ext in '' $ac_executable_extensions; do - if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then - if test "$as_dir/$ac_word$ac_exec_ext" = "/usr/ucb/cc"; then - ac_prog_rejected=yes - continue - fi - ac_cv_prog_CC="cc" - $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 - break 2 - fi -done - done -IFS=$as_save_IFS - -if test $ac_prog_rejected = yes; then - # We found a bogon in the path, so make sure we never use it. - set dummy $ac_cv_prog_CC - shift - if test $# != 0; then - # We chose a different compiler from the bogus one. - # However, it has the same basename, so the bogon will be chosen - # first if we set CC to just the basename; use the full file name. - shift - ac_cv_prog_CC="$as_dir/$ac_word${1+' '}$@" - fi -fi -fi -fi -CC=$ac_cv_prog_CC -if test -n "$CC"; then - { $as_echo "$as_me:${as_lineno-$LINENO}: result: $CC" >&5 -$as_echo "$CC" >&6; } -else - { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 -$as_echo "no" >&6; } -fi - - -fi -if test -z "$CC"; then - if test -n "$ac_tool_prefix"; then - for ac_prog in cl.exe - do - # Extract the first word of "$ac_tool_prefix$ac_prog", so it can be a program name with args. -set dummy $ac_tool_prefix$ac_prog; ac_word=$2 -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 -$as_echo_n "checking for $ac_word... " >&6; } -if ${ac_cv_prog_CC+:} false; then : - $as_echo_n "(cached) " >&6 -else - if test -n "$CC"; then - ac_cv_prog_CC="$CC" # Let the user override the test. -else -as_save_IFS=$IFS; IFS=$PATH_SEPARATOR -for as_dir in $PATH -do - IFS=$as_save_IFS - test -z "$as_dir" && as_dir=. - for ac_exec_ext in '' $ac_executable_extensions; do - if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then - ac_cv_prog_CC="$ac_tool_prefix$ac_prog" - $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 - break 2 - fi -done - done -IFS=$as_save_IFS - -fi -fi -CC=$ac_cv_prog_CC -if test -n "$CC"; then - { $as_echo "$as_me:${as_lineno-$LINENO}: result: $CC" >&5 -$as_echo "$CC" >&6; } -else - { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 -$as_echo "no" >&6; } -fi - - - test -n "$CC" && break - done -fi -if test -z "$CC"; then - ac_ct_CC=$CC - for ac_prog in cl.exe -do - # Extract the first word of "$ac_prog", so it can be a program name with args. -set dummy $ac_prog; ac_word=$2 -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 -$as_echo_n "checking for $ac_word... " >&6; } -if ${ac_cv_prog_ac_ct_CC+:} false; then : - $as_echo_n "(cached) " >&6 -else - if test -n "$ac_ct_CC"; then - ac_cv_prog_ac_ct_CC="$ac_ct_CC" # Let the user override the test. -else -as_save_IFS=$IFS; IFS=$PATH_SEPARATOR -for as_dir in $PATH -do - IFS=$as_save_IFS - test -z "$as_dir" && as_dir=. - for ac_exec_ext in '' $ac_executable_extensions; do - if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then - ac_cv_prog_ac_ct_CC="$ac_prog" - $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 - break 2 - fi -done - done -IFS=$as_save_IFS - -fi -fi -ac_ct_CC=$ac_cv_prog_ac_ct_CC -if test -n "$ac_ct_CC"; then - { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_ct_CC" >&5 -$as_echo "$ac_ct_CC" >&6; } -else - { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 -$as_echo "no" >&6; } -fi - - - test -n "$ac_ct_CC" && break -done - - if test "x$ac_ct_CC" = x; then - CC="" - else - case $cross_compiling:$ac_tool_warned in -yes:) -{ $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5 -$as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;} -ac_tool_warned=yes ;; -esac - CC=$ac_ct_CC - fi -fi - -fi - - -test -z "$CC" && { { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5 -$as_echo "$as_me: error: in \`$ac_pwd':" >&2;} -as_fn_error $? "no acceptable C compiler found in \$PATH -See \`config.log' for more details" "$LINENO" 5; } - -# Provide some information about the compiler. -$as_echo "$as_me:${as_lineno-$LINENO}: checking for C compiler version" >&5 -set X $ac_compile -ac_compiler=$2 -for ac_option in --version -v -V -qversion; do - { { ac_try="$ac_compiler $ac_option >&5" -case "(($ac_try" in - *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; - *) ac_try_echo=$ac_try;; -esac -eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\"" -$as_echo "$ac_try_echo"; } >&5 - (eval "$ac_compiler $ac_option >&5") 2>conftest.err - ac_status=$? - if test -s conftest.err; then - sed '10a\ -... rest of stderr output deleted ... - 10q' conftest.err >conftest.er1 - cat conftest.er1 >&5 - fi - rm -f conftest.er1 conftest.err - $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 - test $ac_status = 0; } -done - -cat confdefs.h - <<_ACEOF >conftest.$ac_ext -/* end confdefs.h. */ - -int -main () -{ - - ; - return 0; -} -_ACEOF -ac_clean_files_save=$ac_clean_files -ac_clean_files="$ac_clean_files a.out a.out.dSYM a.exe b.out" -# Try to create an executable without -o first, disregard a.out. -# It will help us diagnose broken compilers, and finding out an intuition -# of exeext. -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether the C compiler works" >&5 -$as_echo_n "checking whether the C compiler works... " >&6; } -ac_link_default=`$as_echo "$ac_link" | sed 's/ -o *conftest[^ ]*//'` - -# The possible output files: -ac_files="a.out conftest.exe conftest a.exe a_out.exe b.out conftest.*" - -ac_rmfiles= -for ac_file in $ac_files -do - case $ac_file in - *.$ac_ext | *.xcoff | *.tds | *.d | *.pdb | *.xSYM | *.bb | *.bbg | *.map | *.inf | *.dSYM | *.o | *.obj ) ;; - * ) ac_rmfiles="$ac_rmfiles $ac_file";; - esac -done -rm -f $ac_rmfiles - -if { { ac_try="$ac_link_default" -case "(($ac_try" in - *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; - *) ac_try_echo=$ac_try;; -esac -eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\"" -$as_echo "$ac_try_echo"; } >&5 - (eval "$ac_link_default") 2>&5 - ac_status=$? - $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 - test $ac_status = 0; }; then : - # Autoconf-2.13 could set the ac_cv_exeext variable to `no'. -# So ignore a value of `no', otherwise this would lead to `EXEEXT = no' -# in a Makefile. We should not override ac_cv_exeext if it was cached, -# so that the user can short-circuit this test for compilers unknown to -# Autoconf. -for ac_file in $ac_files '' -do - test -f "$ac_file" || continue - case $ac_file in - *.$ac_ext | *.xcoff | *.tds | *.d | *.pdb | *.xSYM | *.bb | *.bbg | *.map | *.inf | *.dSYM | *.o | *.obj ) - ;; - [ab].out ) - # We found the default executable, but exeext='' is most - # certainly right. - break;; - *.* ) - if test "${ac_cv_exeext+set}" = set && test "$ac_cv_exeext" != no; - then :; else - ac_cv_exeext=`expr "$ac_file" : '[^.]*\(\..*\)'` - fi - # We set ac_cv_exeext here because the later test for it is not - # safe: cross compilers may not add the suffix if given an `-o' - # argument, so we may need to know it at that point already. - # Even if this section looks crufty: it has the advantage of - # actually working. - break;; - * ) - break;; - esac -done -test "$ac_cv_exeext" = no && ac_cv_exeext= - -else - ac_file='' -fi -if test -z "$ac_file"; then : - { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 -$as_echo "no" >&6; } -$as_echo "$as_me: failed program was:" >&5 -sed 's/^/| /' conftest.$ac_ext >&5 - -{ { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5 -$as_echo "$as_me: error: in \`$ac_pwd':" >&2;} -as_fn_error 77 "C compiler cannot create executables -See \`config.log' for more details" "$LINENO" 5; } -else - { $as_echo "$as_me:${as_lineno-$LINENO}: result: yes" >&5 -$as_echo "yes" >&6; } -fi -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for C compiler default output file name" >&5 -$as_echo_n "checking for C compiler default output file name... " >&6; } -{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_file" >&5 -$as_echo "$ac_file" >&6; } -ac_exeext=$ac_cv_exeext - -rm -f -r a.out a.out.dSYM a.exe conftest$ac_cv_exeext b.out -ac_clean_files=$ac_clean_files_save -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for suffix of executables" >&5 -$as_echo_n "checking for suffix of executables... " >&6; } -if { { ac_try="$ac_link" -case "(($ac_try" in - *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; - *) ac_try_echo=$ac_try;; -esac -eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\"" -$as_echo "$ac_try_echo"; } >&5 - (eval "$ac_link") 2>&5 - ac_status=$? - $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 - test $ac_status = 0; }; then : - # If both `conftest.exe' and `conftest' are `present' (well, observable) -# catch `conftest.exe'. For instance with Cygwin, `ls conftest' will -# work properly (i.e., refer to `conftest.exe'), while it won't with -# `rm'. -for ac_file in conftest.exe conftest conftest.*; do - test -f "$ac_file" || continue - case $ac_file in - *.$ac_ext | *.xcoff | *.tds | *.d | *.pdb | *.xSYM | *.bb | *.bbg | *.map | *.inf | *.dSYM | *.o | *.obj ) ;; - *.* ) ac_cv_exeext=`expr "$ac_file" : '[^.]*\(\..*\)'` - break;; - * ) break;; - esac -done -else - { { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5 -$as_echo "$as_me: error: in \`$ac_pwd':" >&2;} -as_fn_error $? "cannot compute suffix of executables: cannot compile and link -See \`config.log' for more details" "$LINENO" 5; } -fi -rm -f conftest conftest$ac_cv_exeext -{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_exeext" >&5 -$as_echo "$ac_cv_exeext" >&6; } - -rm -f conftest.$ac_ext -EXEEXT=$ac_cv_exeext -ac_exeext=$EXEEXT -cat confdefs.h - <<_ACEOF >conftest.$ac_ext -/* end confdefs.h. */ -#include -int -main () -{ -FILE *f = fopen ("conftest.out", "w"); - return ferror (f) || fclose (f) != 0; - - ; - return 0; -} -_ACEOF -ac_clean_files="$ac_clean_files conftest.out" -# Check that the compiler produces executables we can run. If not, either -# the compiler is broken, or we cross compile. -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether we are cross compiling" >&5 -$as_echo_n "checking whether we are cross compiling... " >&6; } -if test "$cross_compiling" != yes; then - { { ac_try="$ac_link" -case "(($ac_try" in - *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; - *) ac_try_echo=$ac_try;; -esac -eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\"" -$as_echo "$ac_try_echo"; } >&5 - (eval "$ac_link") 2>&5 - ac_status=$? - $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 - test $ac_status = 0; } - if { ac_try='./conftest$ac_cv_exeext' - { { case "(($ac_try" in - *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; - *) ac_try_echo=$ac_try;; -esac -eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\"" -$as_echo "$ac_try_echo"; } >&5 - (eval "$ac_try") 2>&5 - ac_status=$? - $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 - test $ac_status = 0; }; }; then - cross_compiling=no - else - if test "$cross_compiling" = maybe; then - cross_compiling=yes - else - { { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5 -$as_echo "$as_me: error: in \`$ac_pwd':" >&2;} -as_fn_error $? "cannot run C compiled programs. -If you meant to cross compile, use \`--host'. -See \`config.log' for more details" "$LINENO" 5; } - fi - fi -fi -{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $cross_compiling" >&5 -$as_echo "$cross_compiling" >&6; } - -rm -f conftest.$ac_ext conftest$ac_cv_exeext conftest.out -ac_clean_files=$ac_clean_files_save -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for suffix of object files" >&5 -$as_echo_n "checking for suffix of object files... " >&6; } -if ${ac_cv_objext+:} false; then : - $as_echo_n "(cached) " >&6 -else - cat confdefs.h - <<_ACEOF >conftest.$ac_ext -/* end confdefs.h. */ - -int -main () -{ - - ; - return 0; -} -_ACEOF -rm -f conftest.o conftest.obj -if { { ac_try="$ac_compile" -case "(($ac_try" in - *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; - *) ac_try_echo=$ac_try;; -esac -eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\"" -$as_echo "$ac_try_echo"; } >&5 - (eval "$ac_compile") 2>&5 - ac_status=$? - $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 - test $ac_status = 0; }; then : - for ac_file in conftest.o conftest.obj conftest.*; do - test -f "$ac_file" || continue; - case $ac_file in - *.$ac_ext | *.xcoff | *.tds | *.d | *.pdb | *.xSYM | *.bb | *.bbg | *.map | *.inf | *.dSYM ) ;; - *) ac_cv_objext=`expr "$ac_file" : '.*\.\(.*\)'` - break;; - esac -done -else - $as_echo "$as_me: failed program was:" >&5 -sed 's/^/| /' conftest.$ac_ext >&5 - -{ { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5 -$as_echo "$as_me: error: in \`$ac_pwd':" >&2;} -as_fn_error $? "cannot compute suffix of object files: cannot compile -See \`config.log' for more details" "$LINENO" 5; } -fi -rm -f conftest.$ac_cv_objext conftest.$ac_ext -fi -{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_objext" >&5 -$as_echo "$ac_cv_objext" >&6; } -OBJEXT=$ac_cv_objext -ac_objext=$OBJEXT -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether we are using the GNU C compiler" >&5 -$as_echo_n "checking whether we are using the GNU C compiler... " >&6; } -if ${ac_cv_c_compiler_gnu+:} false; then : - $as_echo_n "(cached) " >&6 -else - cat confdefs.h - <<_ACEOF >conftest.$ac_ext -/* end confdefs.h. */ - -int -main () -{ -#ifndef __GNUC__ - choke me -#endif - - ; - return 0; -} -_ACEOF -if ac_fn_c_try_compile "$LINENO"; then : - ac_compiler_gnu=yes -else - ac_compiler_gnu=no -fi -rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext -ac_cv_c_compiler_gnu=$ac_compiler_gnu - -fi -{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_c_compiler_gnu" >&5 -$as_echo "$ac_cv_c_compiler_gnu" >&6; } -if test $ac_compiler_gnu = yes; then - GCC=yes -else - GCC= -fi -ac_test_CFLAGS=${CFLAGS+set} -ac_save_CFLAGS=$CFLAGS -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether $CC accepts -g" >&5 -$as_echo_n "checking whether $CC accepts -g... " >&6; } -if ${ac_cv_prog_cc_g+:} false; then : - $as_echo_n "(cached) " >&6 -else - ac_save_c_werror_flag=$ac_c_werror_flag - ac_c_werror_flag=yes - ac_cv_prog_cc_g=no - CFLAGS="-g" - cat confdefs.h - <<_ACEOF >conftest.$ac_ext -/* end confdefs.h. */ - -int -main () -{ - - ; - return 0; -} -_ACEOF -if ac_fn_c_try_compile "$LINENO"; then : - ac_cv_prog_cc_g=yes -else - CFLAGS="" - cat confdefs.h - <<_ACEOF >conftest.$ac_ext -/* end confdefs.h. */ - -int -main () -{ - - ; - return 0; -} -_ACEOF -if ac_fn_c_try_compile "$LINENO"; then : - -else - ac_c_werror_flag=$ac_save_c_werror_flag - CFLAGS="-g" - cat confdefs.h - <<_ACEOF >conftest.$ac_ext -/* end confdefs.h. */ - -int -main () -{ - - ; - return 0; -} -_ACEOF -if ac_fn_c_try_compile "$LINENO"; then : - ac_cv_prog_cc_g=yes -fi -rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext -fi -rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext -fi -rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext - ac_c_werror_flag=$ac_save_c_werror_flag -fi -{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_prog_cc_g" >&5 -$as_echo "$ac_cv_prog_cc_g" >&6; } -if test "$ac_test_CFLAGS" = set; then - CFLAGS=$ac_save_CFLAGS -elif test $ac_cv_prog_cc_g = yes; then - if test "$GCC" = yes; then - CFLAGS="-g -O2" - else - CFLAGS="-g" - fi -else - if test "$GCC" = yes; then - CFLAGS="-O2" - else - CFLAGS= - fi -fi -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $CC option to accept ISO C89" >&5 -$as_echo_n "checking for $CC option to accept ISO C89... " >&6; } -if ${ac_cv_prog_cc_c89+:} false; then : - $as_echo_n "(cached) " >&6 -else - ac_cv_prog_cc_c89=no -ac_save_CC=$CC -cat confdefs.h - <<_ACEOF >conftest.$ac_ext -/* end confdefs.h. */ -#include -#include -struct stat; -/* Most of the following tests are stolen from RCS 5.7's src/conf.sh. */ -struct buf { int x; }; -FILE * (*rcsopen) (struct buf *, struct stat *, int); -static char *e (p, i) - char **p; - int i; -{ - return p[i]; -} -static char *f (char * (*g) (char **, int), char **p, ...) -{ - char *s; - va_list v; - va_start (v,p); - s = g (p, va_arg (v,int)); - va_end (v); - return s; -} - -/* OSF 4.0 Compaq cc is some sort of almost-ANSI by default. It has - function prototypes and stuff, but not '\xHH' hex character constants. - These don't provoke an error unfortunately, instead are silently treated - as 'x'. The following induces an error, until -std is added to get - proper ANSI mode. Curiously '\x00'!='x' always comes out true, for an - array size at least. It's necessary to write '\x00'==0 to get something - that's true only with -std. */ -int osf4_cc_array ['\x00' == 0 ? 1 : -1]; - -/* IBM C 6 for AIX is almost-ANSI by default, but it replaces macro parameters - inside strings and character constants. */ -#define FOO(x) 'x' -int xlc6_cc_array[FOO(a) == 'x' ? 1 : -1]; - -int test (int i, double x); -struct s1 {int (*f) (int a);}; -struct s2 {int (*f) (double a);}; -int pairnames (int, char **, FILE *(*)(struct buf *, struct stat *, int), int, int); -int argc; -char **argv; -int -main () -{ -return f (e, argv, 0) != argv[0] || f (e, argv, 1) != argv[1]; - ; - return 0; -} -_ACEOF -for ac_arg in '' -qlanglvl=extc89 -qlanglvl=ansi -std \ - -Ae "-Aa -D_HPUX_SOURCE" "-Xc -D__EXTENSIONS__" -do - CC="$ac_save_CC $ac_arg" - if ac_fn_c_try_compile "$LINENO"; then : - ac_cv_prog_cc_c89=$ac_arg -fi -rm -f core conftest.err conftest.$ac_objext - test "x$ac_cv_prog_cc_c89" != "xno" && break -done -rm -f conftest.$ac_ext -CC=$ac_save_CC - -fi -# AC_CACHE_VAL -case "x$ac_cv_prog_cc_c89" in - x) - { $as_echo "$as_me:${as_lineno-$LINENO}: result: none needed" >&5 -$as_echo "none needed" >&6; } ;; - xno) - { $as_echo "$as_me:${as_lineno-$LINENO}: result: unsupported" >&5 -$as_echo "unsupported" >&6; } ;; - *) - CC="$CC $ac_cv_prog_cc_c89" - { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_prog_cc_c89" >&5 -$as_echo "$ac_cv_prog_cc_c89" >&6; } ;; -esac -if test "x$ac_cv_prog_cc_c89" != xno; then : - -fi - -ac_ext=c -ac_cpp='$CPP $CPPFLAGS' -ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5' -ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5' -ac_compiler_gnu=$ac_cv_c_compiler_gnu - -ac_ext=c -ac_cpp='$CPP $CPPFLAGS' -ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5' -ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5' -ac_compiler_gnu=$ac_cv_c_compiler_gnu -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether $CC understands -c and -o together" >&5 -$as_echo_n "checking whether $CC understands -c and -o together... " >&6; } -if ${am_cv_prog_cc_c_o+:} false; then : - $as_echo_n "(cached) " >&6 -else - cat confdefs.h - <<_ACEOF >conftest.$ac_ext -/* end confdefs.h. */ - -int -main () -{ - - ; - return 0; -} -_ACEOF - # Make sure it works both with $CC and with simple cc. - # Following AC_PROG_CC_C_O, we do the test twice because some - # compilers refuse to overwrite an existing .o file with -o, - # though they will create one. - am_cv_prog_cc_c_o=yes - for am_i in 1 2; do - if { echo "$as_me:$LINENO: $CC -c conftest.$ac_ext -o conftest2.$ac_objext" >&5 - ($CC -c conftest.$ac_ext -o conftest2.$ac_objext) >&5 2>&5 - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); } \ - && test -f conftest2.$ac_objext; then - : OK - else - am_cv_prog_cc_c_o=no - break - fi - done - rm -f core conftest* - unset am_i -fi -{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $am_cv_prog_cc_c_o" >&5 -$as_echo "$am_cv_prog_cc_c_o" >&6; } -if test "$am_cv_prog_cc_c_o" != yes; then - # Losing compiler, so override with the script. - # FIXME: It is wrong to rewrite CC. - # But if we don't then we get into trouble of one sort or another. - # A longer-term fix would be to have automake use am__CC in this case, - # and then we could set am__CC="\$(top_srcdir)/compile \$(CC)" - CC="$am_aux_dir/compile $CC" -fi -ac_ext=c -ac_cpp='$CPP $CPPFLAGS' -ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5' -ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5' -ac_compiler_gnu=$ac_cv_c_compiler_gnu - -DEPDIR="${am__leading_dot}deps" - -ac_config_commands="$ac_config_commands depfiles" - - -am_make=${MAKE-make} -cat > confinc << 'END' -am__doit: - @echo this is the am__doit target -.PHONY: am__doit -END -# If we don't find an include directive, just comment out the code. -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for style of include used by $am_make" >&5 -$as_echo_n "checking for style of include used by $am_make... " >&6; } -am__include="#" -am__quote= -_am_result=none -# First try GNU make style include. -echo "include confinc" > confmf -# Ignore all kinds of additional output from 'make'. -case `$am_make -s -f confmf 2> /dev/null` in #( -*the\ am__doit\ target*) - am__include=include - am__quote= - _am_result=GNU - ;; -esac -# Now try BSD make style include. -if test "$am__include" = "#"; then - echo '.include "confinc"' > confmf - case `$am_make -s -f confmf 2> /dev/null` in #( - *the\ am__doit\ target*) - am__include=.include - am__quote="\"" - _am_result=BSD - ;; - esac -fi - - -{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $_am_result" >&5 -$as_echo "$_am_result" >&6; } -rm -f confinc confmf - -# Check whether --enable-dependency-tracking was given. -if test "${enable_dependency_tracking+set}" = set; then : - enableval=$enable_dependency_tracking; -fi - -if test "x$enable_dependency_tracking" != xno; then - am_depcomp="$ac_aux_dir/depcomp" - AMDEPBACKSLASH='\' - am__nodep='_no' -fi - if test "x$enable_dependency_tracking" != xno; then - AMDEP_TRUE= - AMDEP_FALSE='#' -else - AMDEP_TRUE='#' - AMDEP_FALSE= -fi - - - -depcc="$CC" am_compiler_list= - -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking dependency style of $depcc" >&5 -$as_echo_n "checking dependency style of $depcc... " >&6; } -if ${am_cv_CC_dependencies_compiler_type+:} false; then : - $as_echo_n "(cached) " >&6 -else - if test -z "$AMDEP_TRUE" && test -f "$am_depcomp"; then - # We make a subdir and do the tests there. Otherwise we can end up - # making bogus files that we don't know about and never remove. For - # instance it was reported that on HP-UX the gcc test will end up - # making a dummy file named 'D' -- because '-MD' means "put the output - # in D". - rm -rf conftest.dir - mkdir conftest.dir - # Copy depcomp to subdir because otherwise we won't find it if we're - # using a relative directory. - cp "$am_depcomp" conftest.dir - cd conftest.dir - # We will build objects and dependencies in a subdirectory because - # it helps to detect inapplicable dependency modes. For instance - # both Tru64's cc and ICC support -MD to output dependencies as a - # side effect of compilation, but ICC will put the dependencies in - # the current directory while Tru64 will put them in the object - # directory. - mkdir sub - - am_cv_CC_dependencies_compiler_type=none - if test "$am_compiler_list" = ""; then - am_compiler_list=`sed -n 's/^#*\([a-zA-Z0-9]*\))$/\1/p' < ./depcomp` - fi - am__universal=false - case " $depcc " in #( - *\ -arch\ *\ -arch\ *) am__universal=true ;; - esac - - for depmode in $am_compiler_list; do - # Setup a source with many dependencies, because some compilers - # like to wrap large dependency lists on column 80 (with \), and - # we should not choose a depcomp mode which is confused by this. - # - # We need to recreate these files for each test, as the compiler may - # overwrite some of them when testing with obscure command lines. - # This happens at least with the AIX C compiler. - : > sub/conftest.c - for i in 1 2 3 4 5 6; do - echo '#include "conftst'$i'.h"' >> sub/conftest.c - # Using ": > sub/conftst$i.h" creates only sub/conftst1.h with - # Solaris 10 /bin/sh. - echo '/* dummy */' > sub/conftst$i.h - done - echo "${am__include} ${am__quote}sub/conftest.Po${am__quote}" > confmf - - # We check with '-c' and '-o' for the sake of the "dashmstdout" - # mode. It turns out that the SunPro C++ compiler does not properly - # handle '-M -o', and we need to detect this. Also, some Intel - # versions had trouble with output in subdirs. - am__obj=sub/conftest.${OBJEXT-o} - am__minus_obj="-o $am__obj" - case $depmode in - gcc) - # This depmode causes a compiler race in universal mode. - test "$am__universal" = false || continue - ;; - nosideeffect) - # After this tag, mechanisms are not by side-effect, so they'll - # only be used when explicitly requested. - if test "x$enable_dependency_tracking" = xyes; then - continue - else - break - fi - ;; - msvc7 | msvc7msys | msvisualcpp | msvcmsys) - # This compiler won't grok '-c -o', but also, the minuso test has - # not run yet. These depmodes are late enough in the game, and - # so weak that their functioning should not be impacted. - am__obj=conftest.${OBJEXT-o} - am__minus_obj= - ;; - none) break ;; - esac - if depmode=$depmode \ - source=sub/conftest.c object=$am__obj \ - depfile=sub/conftest.Po tmpdepfile=sub/conftest.TPo \ - $SHELL ./depcomp $depcc -c $am__minus_obj sub/conftest.c \ - >/dev/null 2>conftest.err && - grep sub/conftst1.h sub/conftest.Po > /dev/null 2>&1 && - grep sub/conftst6.h sub/conftest.Po > /dev/null 2>&1 && - grep $am__obj sub/conftest.Po > /dev/null 2>&1 && - ${MAKE-make} -s -f confmf > /dev/null 2>&1; then - # icc doesn't choke on unknown options, it will just issue warnings - # or remarks (even with -Werror). So we grep stderr for any message - # that says an option was ignored or not supported. - # When given -MP, icc 7.0 and 7.1 complain thusly: - # icc: Command line warning: ignoring option '-M'; no argument required - # The diagnosis changed in icc 8.0: - # icc: Command line remark: option '-MP' not supported - if (grep 'ignoring option' conftest.err || - grep 'not supported' conftest.err) >/dev/null 2>&1; then :; else - am_cv_CC_dependencies_compiler_type=$depmode - break - fi - fi - done - - cd .. - rm -rf conftest.dir -else - am_cv_CC_dependencies_compiler_type=none -fi - -fi -{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $am_cv_CC_dependencies_compiler_type" >&5 -$as_echo "$am_cv_CC_dependencies_compiler_type" >&6; } -CCDEPMODE=depmode=$am_cv_CC_dependencies_compiler_type - - if - test "x$enable_dependency_tracking" != xno \ - && test "$am_cv_CC_dependencies_compiler_type" = gcc3; then - am__fastdepCC_TRUE= - am__fastdepCC_FALSE='#' -else - am__fastdepCC_TRUE='#' - am__fastdepCC_FALSE= -fi - - - - - -# Checks for libraries. - -# Checks for header files. - -# Checks for typedefs, structures, and compiler characteristics. - -# Checks for library functions. - -ac_config_files="$ac_config_files Makefile" - -cat >confcache <<\_ACEOF -# This file is a shell script that caches the results of configure -# tests run on this system so they can be shared between configure -# scripts and configure runs, see configure's option --config-cache. -# It is not useful on other systems. If it contains results you don't -# want to keep, you may remove or edit it. -# -# config.status only pays attention to the cache file if you give it -# the --recheck option to rerun configure. -# -# `ac_cv_env_foo' variables (set or unset) will be overridden when -# loading this file, other *unset* `ac_cv_foo' will be assigned the -# following values. - -_ACEOF - -# The following way of writing the cache mishandles newlines in values, -# but we know of no workaround that is simple, portable, and efficient. -# So, we kill variables containing newlines. -# Ultrix sh set writes to stderr and can't be redirected directly, -# and sets the high bit in the cache file unless we assign to the vars. -( - for ac_var in `(set) 2>&1 | sed -n 's/^\([a-zA-Z_][a-zA-Z0-9_]*\)=.*/\1/p'`; do - eval ac_val=\$$ac_var - case $ac_val in #( - *${as_nl}*) - case $ac_var in #( - *_cv_*) { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: cache variable $ac_var contains a newline" >&5 -$as_echo "$as_me: WARNING: cache variable $ac_var contains a newline" >&2;} ;; - esac - case $ac_var in #( - _ | IFS | as_nl) ;; #( - BASH_ARGV | BASH_SOURCE) eval $ac_var= ;; #( - *) { eval $ac_var=; unset $ac_var;} ;; - esac ;; - esac - done - - (set) 2>&1 | - case $as_nl`(ac_space=' '; set) 2>&1` in #( - *${as_nl}ac_space=\ *) - # `set' does not quote correctly, so add quotes: double-quote - # substitution turns \\\\ into \\, and sed turns \\ into \. - sed -n \ - "s/'/'\\\\''/g; - s/^\\([_$as_cr_alnum]*_cv_[_$as_cr_alnum]*\\)=\\(.*\\)/\\1='\\2'/p" - ;; #( - *) - # `set' quotes correctly as required by POSIX, so do not add quotes. - sed -n "/^[_$as_cr_alnum]*_cv_[_$as_cr_alnum]*=/p" - ;; - esac | - sort -) | - sed ' - /^ac_cv_env_/b end - t clear - :clear - s/^\([^=]*\)=\(.*[{}].*\)$/test "${\1+set}" = set || &/ - t end - s/^\([^=]*\)=\(.*\)$/\1=${\1=\2}/ - :end' >>confcache -if diff "$cache_file" confcache >/dev/null 2>&1; then :; else - if test -w "$cache_file"; then - if test "x$cache_file" != "x/dev/null"; then - { $as_echo "$as_me:${as_lineno-$LINENO}: updating cache $cache_file" >&5 -$as_echo "$as_me: updating cache $cache_file" >&6;} - if test ! -f "$cache_file" || test -h "$cache_file"; then - cat confcache >"$cache_file" - else - case $cache_file in #( - */* | ?:*) - mv -f confcache "$cache_file"$$ && - mv -f "$cache_file"$$ "$cache_file" ;; #( - *) - mv -f confcache "$cache_file" ;; - esac - fi - fi - else - { $as_echo "$as_me:${as_lineno-$LINENO}: not updating unwritable cache $cache_file" >&5 -$as_echo "$as_me: not updating unwritable cache $cache_file" >&6;} - fi -fi -rm -f confcache - -test "x$prefix" = xNONE && prefix=$ac_default_prefix -# Let make expand exec_prefix. -test "x$exec_prefix" = xNONE && exec_prefix='${prefix}' - -DEFS=-DHAVE_CONFIG_H - -ac_libobjs= -ac_ltlibobjs= -U= -for ac_i in : $LIBOBJS; do test "x$ac_i" = x: && continue - # 1. Remove the extension, and $U if already installed. - ac_script='s/\$U\././;s/\.o$//;s/\.obj$//' - ac_i=`$as_echo "$ac_i" | sed "$ac_script"` - # 2. Prepend LIBOBJDIR. When used with automake>=1.10 LIBOBJDIR - # will be set to the directory where LIBOBJS objects are built. - as_fn_append ac_libobjs " \${LIBOBJDIR}$ac_i\$U.$ac_objext" - as_fn_append ac_ltlibobjs " \${LIBOBJDIR}$ac_i"'$U.lo' -done -LIBOBJS=$ac_libobjs - -LTLIBOBJS=$ac_ltlibobjs - - -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking that generated files are newer than configure" >&5 -$as_echo_n "checking that generated files are newer than configure... " >&6; } - if test -n "$am_sleep_pid"; then - # Hide warnings about reused PIDs. - wait $am_sleep_pid 2>/dev/null - fi - { $as_echo "$as_me:${as_lineno-$LINENO}: result: done" >&5 -$as_echo "done" >&6; } - if test -n "$EXEEXT"; then - am__EXEEXT_TRUE= - am__EXEEXT_FALSE='#' -else - am__EXEEXT_TRUE='#' - am__EXEEXT_FALSE= -fi - -if test -z "${AMDEP_TRUE}" && test -z "${AMDEP_FALSE}"; then - as_fn_error $? "conditional \"AMDEP\" was never defined. -Usually this means the macro was only invoked conditionally." "$LINENO" 5 -fi -if test -z "${am__fastdepCC_TRUE}" && test -z "${am__fastdepCC_FALSE}"; then - as_fn_error $? "conditional \"am__fastdepCC\" was never defined. -Usually this means the macro was only invoked conditionally." "$LINENO" 5 -fi - -: "${CONFIG_STATUS=./config.status}" -ac_write_fail=0 -ac_clean_files_save=$ac_clean_files -ac_clean_files="$ac_clean_files $CONFIG_STATUS" -{ $as_echo "$as_me:${as_lineno-$LINENO}: creating $CONFIG_STATUS" >&5 -$as_echo "$as_me: creating $CONFIG_STATUS" >&6;} -as_write_fail=0 -cat >$CONFIG_STATUS <<_ASEOF || as_write_fail=1 -#! $SHELL -# Generated by $as_me. -# Run this file to recreate the current configuration. -# Compiler output produced by configure, useful for debugging -# configure, is in config.log if it exists. - -debug=false -ac_cs_recheck=false -ac_cs_silent=false - -SHELL=\${CONFIG_SHELL-$SHELL} -export SHELL -_ASEOF -cat >>$CONFIG_STATUS <<\_ASEOF || as_write_fail=1 -## -------------------- ## -## M4sh Initialization. ## -## -------------------- ## - -# Be more Bourne compatible -DUALCASE=1; export DUALCASE # for MKS sh -if test -n "${ZSH_VERSION+set}" && (emulate sh) >/dev/null 2>&1; then : - emulate sh - NULLCMD=: - # Pre-4.2 versions of Zsh do word splitting on ${1+"$@"}, which - # is contrary to our usage. Disable this feature. - alias -g '${1+"$@"}'='"$@"' - setopt NO_GLOB_SUBST -else - case `(set -o) 2>/dev/null` in #( - *posix*) : - set -o posix ;; #( - *) : - ;; -esac -fi - - -as_nl=' -' -export as_nl -# Printing a long string crashes Solaris 7 /usr/bin/printf. -as_echo='\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\' -as_echo=$as_echo$as_echo$as_echo$as_echo$as_echo -as_echo=$as_echo$as_echo$as_echo$as_echo$as_echo$as_echo -# Prefer a ksh shell builtin over an external printf program on Solaris, -# but without wasting forks for bash or zsh. -if test -z "$BASH_VERSION$ZSH_VERSION" \ - && (test "X`print -r -- $as_echo`" = "X$as_echo") 2>/dev/null; then - as_echo='print -r --' - as_echo_n='print -rn --' -elif (test "X`printf %s $as_echo`" = "X$as_echo") 2>/dev/null; then - as_echo='printf %s\n' - as_echo_n='printf %s' -else - if test "X`(/usr/ucb/echo -n -n $as_echo) 2>/dev/null`" = "X-n $as_echo"; then - as_echo_body='eval /usr/ucb/echo -n "$1$as_nl"' - as_echo_n='/usr/ucb/echo -n' - else - as_echo_body='eval expr "X$1" : "X\\(.*\\)"' - as_echo_n_body='eval - arg=$1; - case $arg in #( - *"$as_nl"*) - expr "X$arg" : "X\\(.*\\)$as_nl"; - arg=`expr "X$arg" : ".*$as_nl\\(.*\\)"`;; - esac; - expr "X$arg" : "X\\(.*\\)" | tr -d "$as_nl" - ' - export as_echo_n_body - as_echo_n='sh -c $as_echo_n_body as_echo' - fi - export as_echo_body - as_echo='sh -c $as_echo_body as_echo' -fi - -# The user is always right. -if test "${PATH_SEPARATOR+set}" != set; then - PATH_SEPARATOR=: - (PATH='/bin;/bin'; FPATH=$PATH; sh -c :) >/dev/null 2>&1 && { - (PATH='/bin:/bin'; FPATH=$PATH; sh -c :) >/dev/null 2>&1 || - PATH_SEPARATOR=';' - } -fi - - -# IFS -# We need space, tab and new line, in precisely that order. Quoting is -# there to prevent editors from complaining about space-tab. -# (If _AS_PATH_WALK were called with IFS unset, it would disable word -# splitting by setting IFS to empty value.) -IFS=" "" $as_nl" - -# Find who we are. Look in the path if we contain no directory separator. -as_myself= -case $0 in #(( - *[\\/]* ) as_myself=$0 ;; - *) as_save_IFS=$IFS; IFS=$PATH_SEPARATOR -for as_dir in $PATH -do - IFS=$as_save_IFS - test -z "$as_dir" && as_dir=. - test -r "$as_dir/$0" && as_myself=$as_dir/$0 && break - done -IFS=$as_save_IFS - - ;; -esac -# We did not find ourselves, most probably we were run as `sh COMMAND' -# in which case we are not to be found in the path. -if test "x$as_myself" = x; then - as_myself=$0 -fi -if test ! -f "$as_myself"; then - $as_echo "$as_myself: error: cannot find myself; rerun with an absolute file name" >&2 - exit 1 -fi - -# Unset variables that we do not need and which cause bugs (e.g. in -# pre-3.0 UWIN ksh). But do not cause bugs in bash 2.01; the "|| exit 1" -# suppresses any "Segmentation fault" message there. '((' could -# trigger a bug in pdksh 5.2.14. -for as_var in BASH_ENV ENV MAIL MAILPATH -do eval test x\${$as_var+set} = xset \ - && ( (unset $as_var) || exit 1) >/dev/null 2>&1 && unset $as_var || : -done -PS1='$ ' -PS2='> ' -PS4='+ ' - -# NLS nuisances. -LC_ALL=C -export LC_ALL -LANGUAGE=C -export LANGUAGE - -# CDPATH. -(unset CDPATH) >/dev/null 2>&1 && unset CDPATH - - -# as_fn_error STATUS ERROR [LINENO LOG_FD] -# ---------------------------------------- -# Output "`basename $0`: error: ERROR" to stderr. If LINENO and LOG_FD are -# provided, also output the error to LOG_FD, referencing LINENO. Then exit the -# script with STATUS, using 1 if that was 0. -as_fn_error () -{ - as_status=$1; test $as_status -eq 0 && as_status=1 - if test "$4"; then - as_lineno=${as_lineno-"$3"} as_lineno_stack=as_lineno_stack=$as_lineno_stack - $as_echo "$as_me:${as_lineno-$LINENO}: error: $2" >&$4 - fi - $as_echo "$as_me: error: $2" >&2 - as_fn_exit $as_status -} # as_fn_error - - -# as_fn_set_status STATUS -# ----------------------- -# Set $? to STATUS, without forking. -as_fn_set_status () -{ - return $1 -} # as_fn_set_status - -# as_fn_exit STATUS -# ----------------- -# Exit the shell with STATUS, even in a "trap 0" or "set -e" context. -as_fn_exit () -{ - set +e - as_fn_set_status $1 - exit $1 -} # as_fn_exit - -# as_fn_unset VAR -# --------------- -# Portably unset VAR. -as_fn_unset () -{ - { eval $1=; unset $1;} -} -as_unset=as_fn_unset -# as_fn_append VAR VALUE -# ---------------------- -# Append the text in VALUE to the end of the definition contained in VAR. Take -# advantage of any shell optimizations that allow amortized linear growth over -# repeated appends, instead of the typical quadratic growth present in naive -# implementations. -if (eval "as_var=1; as_var+=2; test x\$as_var = x12") 2>/dev/null; then : - eval 'as_fn_append () - { - eval $1+=\$2 - }' -else - as_fn_append () - { - eval $1=\$$1\$2 - } -fi # as_fn_append - -# as_fn_arith ARG... -# ------------------ -# Perform arithmetic evaluation on the ARGs, and store the result in the -# global $as_val. Take advantage of shells that can avoid forks. The arguments -# must be portable across $(()) and expr. -if (eval "test \$(( 1 + 1 )) = 2") 2>/dev/null; then : - eval 'as_fn_arith () - { - as_val=$(( $* )) - }' -else - as_fn_arith () - { - as_val=`expr "$@" || test $? -eq 1` - } -fi # as_fn_arith - - -if expr a : '\(a\)' >/dev/null 2>&1 && - test "X`expr 00001 : '.*\(...\)'`" = X001; then - as_expr=expr -else - as_expr=false -fi - -if (basename -- /) >/dev/null 2>&1 && test "X`basename -- / 2>&1`" = "X/"; then - as_basename=basename -else - as_basename=false -fi - -if (as_dir=`dirname -- /` && test "X$as_dir" = X/) >/dev/null 2>&1; then - as_dirname=dirname -else - as_dirname=false -fi - -as_me=`$as_basename -- "$0" || -$as_expr X/"$0" : '.*/\([^/][^/]*\)/*$' \| \ - X"$0" : 'X\(//\)$' \| \ - X"$0" : 'X\(/\)' \| . 2>/dev/null || -$as_echo X/"$0" | - sed '/^.*\/\([^/][^/]*\)\/*$/{ - s//\1/ - q - } - /^X\/\(\/\/\)$/{ - s//\1/ - q - } - /^X\/\(\/\).*/{ - s//\1/ - q - } - s/.*/./; q'` - -# Avoid depending upon Character Ranges. -as_cr_letters='abcdefghijklmnopqrstuvwxyz' -as_cr_LETTERS='ABCDEFGHIJKLMNOPQRSTUVWXYZ' -as_cr_Letters=$as_cr_letters$as_cr_LETTERS -as_cr_digits='0123456789' -as_cr_alnum=$as_cr_Letters$as_cr_digits - -ECHO_C= ECHO_N= ECHO_T= -case `echo -n x` in #((((( --n*) - case `echo 'xy\c'` in - *c*) ECHO_T=' ';; # ECHO_T is single tab character. - xy) ECHO_C='\c';; - *) echo `echo ksh88 bug on AIX 6.1` > /dev/null - ECHO_T=' ';; - esac;; -*) - ECHO_N='-n';; -esac - -rm -f conf$$ conf$$.exe conf$$.file -if test -d conf$$.dir; then - rm -f conf$$.dir/conf$$.file -else - rm -f conf$$.dir - mkdir conf$$.dir 2>/dev/null -fi -if (echo >conf$$.file) 2>/dev/null; then - if ln -s conf$$.file conf$$ 2>/dev/null; then - as_ln_s='ln -s' - # ... but there are two gotchas: - # 1) On MSYS, both `ln -s file dir' and `ln file dir' fail. - # 2) DJGPP < 2.04 has no symlinks; `ln -s' creates a wrapper executable. - # In both cases, we have to default to `cp -pR'. - ln -s conf$$.file conf$$.dir 2>/dev/null && test ! -f conf$$.exe || - as_ln_s='cp -pR' - elif ln conf$$.file conf$$ 2>/dev/null; then - as_ln_s=ln - else - as_ln_s='cp -pR' - fi -else - as_ln_s='cp -pR' -fi -rm -f conf$$ conf$$.exe conf$$.dir/conf$$.file conf$$.file -rmdir conf$$.dir 2>/dev/null - - -# as_fn_mkdir_p -# ------------- -# Create "$as_dir" as a directory, including parents if necessary. -as_fn_mkdir_p () -{ - - case $as_dir in #( - -*) as_dir=./$as_dir;; - esac - test -d "$as_dir" || eval $as_mkdir_p || { - as_dirs= - while :; do - case $as_dir in #( - *\'*) as_qdir=`$as_echo "$as_dir" | sed "s/'/'\\\\\\\\''/g"`;; #'( - *) as_qdir=$as_dir;; - esac - as_dirs="'$as_qdir' $as_dirs" - as_dir=`$as_dirname -- "$as_dir" || -$as_expr X"$as_dir" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \ - X"$as_dir" : 'X\(//\)[^/]' \| \ - X"$as_dir" : 'X\(//\)$' \| \ - X"$as_dir" : 'X\(/\)' \| . 2>/dev/null || -$as_echo X"$as_dir" | - sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ - s//\1/ - q - } - /^X\(\/\/\)[^/].*/{ - s//\1/ - q - } - /^X\(\/\/\)$/{ - s//\1/ - q - } - /^X\(\/\).*/{ - s//\1/ - q - } - s/.*/./; q'` - test -d "$as_dir" && break - done - test -z "$as_dirs" || eval "mkdir $as_dirs" - } || test -d "$as_dir" || as_fn_error $? "cannot create directory $as_dir" - - -} # as_fn_mkdir_p -if mkdir -p . 2>/dev/null; then - as_mkdir_p='mkdir -p "$as_dir"' -else - test -d ./-p && rmdir ./-p - as_mkdir_p=false -fi - - -# as_fn_executable_p FILE -# ----------------------- -# Test if FILE is an executable regular file. -as_fn_executable_p () -{ - test -f "$1" && test -x "$1" -} # as_fn_executable_p -as_test_x='test -x' -as_executable_p=as_fn_executable_p - -# Sed expression to map a string onto a valid CPP name. -as_tr_cpp="eval sed 'y%*$as_cr_letters%P$as_cr_LETTERS%;s%[^_$as_cr_alnum]%_%g'" - -# Sed expression to map a string onto a valid variable name. -as_tr_sh="eval sed 'y%*+%pp%;s%[^_$as_cr_alnum]%_%g'" - - -exec 6>&1 -## ----------------------------------- ## -## Main body of $CONFIG_STATUS script. ## -## ----------------------------------- ## -_ASEOF -test $as_write_fail = 0 && chmod +x $CONFIG_STATUS || ac_write_fail=1 - -cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1 -# Save the log message, to keep $0 and so on meaningful, and to -# report actual input values of CONFIG_FILES etc. instead of their -# values after options handling. -ac_log=" -This file was extended by autohello $as_me 1.1, which was -generated by GNU Autoconf 2.69. Invocation command line was - - CONFIG_FILES = $CONFIG_FILES - CONFIG_HEADERS = $CONFIG_HEADERS - CONFIG_LINKS = $CONFIG_LINKS - CONFIG_COMMANDS = $CONFIG_COMMANDS - $ $0 $@ - -on `(hostname || uname -n) 2>/dev/null | sed 1q` -" - -_ACEOF - -case $ac_config_files in *" -"*) set x $ac_config_files; shift; ac_config_files=$*;; -esac - -case $ac_config_headers in *" -"*) set x $ac_config_headers; shift; ac_config_headers=$*;; -esac - - -cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1 -# Files that config.status was made for. -config_files="$ac_config_files" -config_headers="$ac_config_headers" -config_commands="$ac_config_commands" - -_ACEOF - -cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1 -ac_cs_usage="\ -\`$as_me' instantiates files and other configuration actions -from templates according to the current configuration. Unless the files -and actions are specified as TAGs, all are instantiated by default. - -Usage: $0 [OPTION]... [TAG]... - - -h, --help print this help, then exit - -V, --version print version number and configuration settings, then exit - --config print configuration, then exit - -q, --quiet, --silent - do not print progress messages - -d, --debug don't remove temporary files - --recheck update $as_me by reconfiguring in the same conditions - --file=FILE[:TEMPLATE] - instantiate the configuration file FILE - --header=FILE[:TEMPLATE] - instantiate the configuration header FILE - -Configuration files: -$config_files - -Configuration headers: -$config_headers - -Configuration commands: -$config_commands - -Report bugs to ." - -_ACEOF -cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1 -ac_cs_config="`$as_echo "$ac_configure_args" | sed 's/^ //; s/[\\""\`\$]/\\\\&/g'`" -ac_cs_version="\\ -autohello config.status 1.1 -configured by $0, generated by GNU Autoconf 2.69, - with options \\"\$ac_cs_config\\" - -Copyright (C) 2012 Free Software Foundation, Inc. -This config.status script is free software; the Free Software Foundation -gives unlimited permission to copy, distribute and modify it." - -ac_pwd='$ac_pwd' -srcdir='$srcdir' -INSTALL='$INSTALL' -MKDIR_P='$MKDIR_P' -AWK='$AWK' -test -n "\$AWK" || AWK=awk -_ACEOF - -cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1 -# The default lists apply if the user does not specify any file. -ac_need_defaults=: -while test $# != 0 -do - case $1 in - --*=?*) - ac_option=`expr "X$1" : 'X\([^=]*\)='` - ac_optarg=`expr "X$1" : 'X[^=]*=\(.*\)'` - ac_shift=: - ;; - --*=) - ac_option=`expr "X$1" : 'X\([^=]*\)='` - ac_optarg= - ac_shift=: - ;; - *) - ac_option=$1 - ac_optarg=$2 - ac_shift=shift - ;; - esac - - case $ac_option in - # Handling of the options. - -recheck | --recheck | --rechec | --reche | --rech | --rec | --re | --r) - ac_cs_recheck=: ;; - --version | --versio | --versi | --vers | --ver | --ve | --v | -V ) - $as_echo "$ac_cs_version"; exit ;; - --config | --confi | --conf | --con | --co | --c ) - $as_echo "$ac_cs_config"; exit ;; - --debug | --debu | --deb | --de | --d | -d ) - debug=: ;; - --file | --fil | --fi | --f ) - $ac_shift - case $ac_optarg in - *\'*) ac_optarg=`$as_echo "$ac_optarg" | sed "s/'/'\\\\\\\\''/g"` ;; - '') as_fn_error $? "missing file argument" ;; - esac - as_fn_append CONFIG_FILES " '$ac_optarg'" - ac_need_defaults=false;; - --header | --heade | --head | --hea ) - $ac_shift - case $ac_optarg in - *\'*) ac_optarg=`$as_echo "$ac_optarg" | sed "s/'/'\\\\\\\\''/g"` ;; - esac - as_fn_append CONFIG_HEADERS " '$ac_optarg'" - ac_need_defaults=false;; - --he | --h) - # Conflict between --help and --header - as_fn_error $? "ambiguous option: \`$1' -Try \`$0 --help' for more information.";; - --help | --hel | -h ) - $as_echo "$ac_cs_usage"; exit ;; - -q | -quiet | --quiet | --quie | --qui | --qu | --q \ - | -silent | --silent | --silen | --sile | --sil | --si | --s) - ac_cs_silent=: ;; - - # This is an error. - -*) as_fn_error $? "unrecognized option: \`$1' -Try \`$0 --help' for more information." ;; - - *) as_fn_append ac_config_targets " $1" - ac_need_defaults=false ;; - - esac - shift -done - -ac_configure_extra_args= - -if $ac_cs_silent; then - exec 6>/dev/null - ac_configure_extra_args="$ac_configure_extra_args --silent" -fi - -_ACEOF -cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1 -if \$ac_cs_recheck; then - set X $SHELL '$0' $ac_configure_args \$ac_configure_extra_args --no-create --no-recursion - shift - \$as_echo "running CONFIG_SHELL=$SHELL \$*" >&6 - CONFIG_SHELL='$SHELL' - export CONFIG_SHELL - exec "\$@" -fi - -_ACEOF -cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1 -exec 5>>config.log -{ - echo - sed 'h;s/./-/g;s/^.../## /;s/...$/ ##/;p;x;p;x' <<_ASBOX -## Running $as_me. ## -_ASBOX - $as_echo "$ac_log" -} >&5 - -_ACEOF -cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1 -# -# INIT-COMMANDS -# -AMDEP_TRUE="$AMDEP_TRUE" ac_aux_dir="$ac_aux_dir" - -_ACEOF - -cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1 - -# Handling of arguments. -for ac_config_target in $ac_config_targets -do - case $ac_config_target in - "config.h") CONFIG_HEADERS="$CONFIG_HEADERS config.h" ;; - "depfiles") CONFIG_COMMANDS="$CONFIG_COMMANDS depfiles" ;; - "Makefile") CONFIG_FILES="$CONFIG_FILES Makefile" ;; - - *) as_fn_error $? "invalid argument: \`$ac_config_target'" "$LINENO" 5;; - esac -done - - -# If the user did not use the arguments to specify the items to instantiate, -# then the envvar interface is used. Set only those that are not. -# We use the long form for the default assignment because of an extremely -# bizarre bug on SunOS 4.1.3. -if $ac_need_defaults; then - test "${CONFIG_FILES+set}" = set || CONFIG_FILES=$config_files - test "${CONFIG_HEADERS+set}" = set || CONFIG_HEADERS=$config_headers - test "${CONFIG_COMMANDS+set}" = set || CONFIG_COMMANDS=$config_commands -fi - -# Have a temporary directory for convenience. Make it in the build tree -# simply because there is no reason against having it here, and in addition, -# creating and moving files from /tmp can sometimes cause problems. -# Hook for its removal unless debugging. -# Note that there is a small window in which the directory will not be cleaned: -# after its creation but before its name has been assigned to `$tmp'. -$debug || -{ - tmp= ac_tmp= - trap 'exit_status=$? - : "${ac_tmp:=$tmp}" - { test ! -d "$ac_tmp" || rm -fr "$ac_tmp"; } && exit $exit_status -' 0 - trap 'as_fn_exit 1' 1 2 13 15 -} -# Create a (secure) tmp directory for tmp files. - -{ - tmp=`(umask 077 && mktemp -d "./confXXXXXX") 2>/dev/null` && - test -d "$tmp" -} || -{ - tmp=./conf$$-$RANDOM - (umask 077 && mkdir "$tmp") -} || as_fn_error $? "cannot create a temporary directory in ." "$LINENO" 5 -ac_tmp=$tmp - -# Set up the scripts for CONFIG_FILES section. -# No need to generate them if there are no CONFIG_FILES. -# This happens for instance with `./config.status config.h'. -if test -n "$CONFIG_FILES"; then - - -ac_cr=`echo X | tr X '\015'` -# On cygwin, bash can eat \r inside `` if the user requested igncr. -# But we know of no other shell where ac_cr would be empty at this -# point, so we can use a bashism as a fallback. -if test "x$ac_cr" = x; then - eval ac_cr=\$\'\\r\' -fi -ac_cs_awk_cr=`$AWK 'BEGIN { print "a\rb" }' /dev/null` -if test "$ac_cs_awk_cr" = "a${ac_cr}b"; then - ac_cs_awk_cr='\\r' -else - ac_cs_awk_cr=$ac_cr -fi - -echo 'BEGIN {' >"$ac_tmp/subs1.awk" && -_ACEOF - - -{ - echo "cat >conf$$subs.awk <<_ACEOF" && - echo "$ac_subst_vars" | sed 's/.*/&!$&$ac_delim/' && - echo "_ACEOF" -} >conf$$subs.sh || - as_fn_error $? "could not make $CONFIG_STATUS" "$LINENO" 5 -ac_delim_num=`echo "$ac_subst_vars" | grep -c '^'` -ac_delim='%!_!# ' -for ac_last_try in false false false false false :; do - . ./conf$$subs.sh || - as_fn_error $? "could not make $CONFIG_STATUS" "$LINENO" 5 - - ac_delim_n=`sed -n "s/.*$ac_delim\$/X/p" conf$$subs.awk | grep -c X` - if test $ac_delim_n = $ac_delim_num; then - break - elif $ac_last_try; then - as_fn_error $? "could not make $CONFIG_STATUS" "$LINENO" 5 - else - ac_delim="$ac_delim!$ac_delim _$ac_delim!! " - fi -done -rm -f conf$$subs.sh - -cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1 -cat >>"\$ac_tmp/subs1.awk" <<\\_ACAWK && -_ACEOF -sed -n ' -h -s/^/S["/; s/!.*/"]=/ -p -g -s/^[^!]*!// -:repl -t repl -s/'"$ac_delim"'$// -t delim -:nl -h -s/\(.\{148\}\)..*/\1/ -t more1 -s/["\\]/\\&/g; s/^/"/; s/$/\\n"\\/ -p -n -b repl -:more1 -s/["\\]/\\&/g; s/^/"/; s/$/"\\/ -p -g -s/.\{148\}// -t nl -:delim -h -s/\(.\{148\}\)..*/\1/ -t more2 -s/["\\]/\\&/g; s/^/"/; s/$/"/ -p -b -:more2 -s/["\\]/\\&/g; s/^/"/; s/$/"\\/ -p -g -s/.\{148\}// -t delim -' >$CONFIG_STATUS || ac_write_fail=1 -rm -f conf$$subs.awk -cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1 -_ACAWK -cat >>"\$ac_tmp/subs1.awk" <<_ACAWK && - for (key in S) S_is_set[key] = 1 - FS = "" - -} -{ - line = $ 0 - nfields = split(line, field, "@") - substed = 0 - len = length(field[1]) - for (i = 2; i < nfields; i++) { - key = field[i] - keylen = length(key) - if (S_is_set[key]) { - value = S[key] - line = substr(line, 1, len) "" value "" substr(line, len + keylen + 3) - len += length(value) + length(field[++i]) - substed = 1 - } else - len += 1 + keylen - } - - print line -} - -_ACAWK -_ACEOF -cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1 -if sed "s/$ac_cr//" < /dev/null > /dev/null 2>&1; then - sed "s/$ac_cr\$//; s/$ac_cr/$ac_cs_awk_cr/g" -else - cat -fi < "$ac_tmp/subs1.awk" > "$ac_tmp/subs.awk" \ - || as_fn_error $? "could not setup config files machinery" "$LINENO" 5 -_ACEOF - -# VPATH may cause trouble with some makes, so we remove sole $(srcdir), -# ${srcdir} and @srcdir@ entries from VPATH if srcdir is ".", strip leading and -# trailing colons and then remove the whole line if VPATH becomes empty -# (actually we leave an empty line to preserve line numbers). -if test "x$srcdir" = x.; then - ac_vpsub='/^[ ]*VPATH[ ]*=[ ]*/{ -h -s/// -s/^/:/ -s/[ ]*$/:/ -s/:\$(srcdir):/:/g -s/:\${srcdir}:/:/g -s/:@srcdir@:/:/g -s/^:*// -s/:*$// -x -s/\(=[ ]*\).*/\1/ -G -s/\n// -s/^[^=]*=[ ]*$// -}' -fi - -cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1 -fi # test -n "$CONFIG_FILES" - -# Set up the scripts for CONFIG_HEADERS section. -# No need to generate them if there are no CONFIG_HEADERS. -# This happens for instance with `./config.status Makefile'. -if test -n "$CONFIG_HEADERS"; then -cat >"$ac_tmp/defines.awk" <<\_ACAWK || -BEGIN { -_ACEOF - -# Transform confdefs.h into an awk script `defines.awk', embedded as -# here-document in config.status, that substitutes the proper values into -# config.h.in to produce config.h. - -# Create a delimiter string that does not exist in confdefs.h, to ease -# handling of long lines. -ac_delim='%!_!# ' -for ac_last_try in false false :; do - ac_tt=`sed -n "/$ac_delim/p" confdefs.h` - if test -z "$ac_tt"; then - break - elif $ac_last_try; then - as_fn_error $? "could not make $CONFIG_HEADERS" "$LINENO" 5 - else - ac_delim="$ac_delim!$ac_delim _$ac_delim!! " - fi -done - -# For the awk script, D is an array of macro values keyed by name, -# likewise P contains macro parameters if any. Preserve backslash -# newline sequences. - -ac_word_re=[_$as_cr_Letters][_$as_cr_alnum]* -sed -n ' -s/.\{148\}/&'"$ac_delim"'/g -t rset -:rset -s/^[ ]*#[ ]*define[ ][ ]*/ / -t def -d -:def -s/\\$// -t bsnl -s/["\\]/\\&/g -s/^ \('"$ac_word_re"'\)\(([^()]*)\)[ ]*\(.*\)/P["\1"]="\2"\ -D["\1"]=" \3"/p -s/^ \('"$ac_word_re"'\)[ ]*\(.*\)/D["\1"]=" \2"/p -d -:bsnl -s/["\\]/\\&/g -s/^ \('"$ac_word_re"'\)\(([^()]*)\)[ ]*\(.*\)/P["\1"]="\2"\ -D["\1"]=" \3\\\\\\n"\\/p -t cont -s/^ \('"$ac_word_re"'\)[ ]*\(.*\)/D["\1"]=" \2\\\\\\n"\\/p -t cont -d -:cont -n -s/.\{148\}/&'"$ac_delim"'/g -t clear -:clear -s/\\$// -t bsnlc -s/["\\]/\\&/g; s/^/"/; s/$/"/p -d -:bsnlc -s/["\\]/\\&/g; s/^/"/; s/$/\\\\\\n"\\/p -b cont -' >$CONFIG_STATUS || ac_write_fail=1 - -cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1 - for (key in D) D_is_set[key] = 1 - FS = "" -} -/^[\t ]*#[\t ]*(define|undef)[\t ]+$ac_word_re([\t (]|\$)/ { - line = \$ 0 - split(line, arg, " ") - if (arg[1] == "#") { - defundef = arg[2] - mac1 = arg[3] - } else { - defundef = substr(arg[1], 2) - mac1 = arg[2] - } - split(mac1, mac2, "(") #) - macro = mac2[1] - prefix = substr(line, 1, index(line, defundef) - 1) - if (D_is_set[macro]) { - # Preserve the white space surrounding the "#". - print prefix "define", macro P[macro] D[macro] - next - } else { - # Replace #undef with comments. This is necessary, for example, - # in the case of _POSIX_SOURCE, which is predefined and required - # on some systems where configure will not decide to define it. - if (defundef == "undef") { - print "/*", prefix defundef, macro, "*/" - next - } - } -} -{ print } -_ACAWK -_ACEOF -cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1 - as_fn_error $? "could not setup config headers machinery" "$LINENO" 5 -fi # test -n "$CONFIG_HEADERS" - - -eval set X " :F $CONFIG_FILES :H $CONFIG_HEADERS :C $CONFIG_COMMANDS" -shift -for ac_tag -do - case $ac_tag in - :[FHLC]) ac_mode=$ac_tag; continue;; - esac - case $ac_mode$ac_tag in - :[FHL]*:*);; - :L* | :C*:*) as_fn_error $? "invalid tag \`$ac_tag'" "$LINENO" 5;; - :[FH]-) ac_tag=-:-;; - :[FH]*) ac_tag=$ac_tag:$ac_tag.in;; - esac - ac_save_IFS=$IFS - IFS=: - set x $ac_tag - IFS=$ac_save_IFS - shift - ac_file=$1 - shift - - case $ac_mode in - :L) ac_source=$1;; - :[FH]) - ac_file_inputs= - for ac_f - do - case $ac_f in - -) ac_f="$ac_tmp/stdin";; - *) # Look for the file first in the build tree, then in the source tree - # (if the path is not absolute). The absolute path cannot be DOS-style, - # because $ac_f cannot contain `:'. - test -f "$ac_f" || - case $ac_f in - [\\/$]*) false;; - *) test -f "$srcdir/$ac_f" && ac_f="$srcdir/$ac_f";; - esac || - as_fn_error 1 "cannot find input file: \`$ac_f'" "$LINENO" 5;; - esac - case $ac_f in *\'*) ac_f=`$as_echo "$ac_f" | sed "s/'/'\\\\\\\\''/g"`;; esac - as_fn_append ac_file_inputs " '$ac_f'" - done - - # Let's still pretend it is `configure' which instantiates (i.e., don't - # use $as_me), people would be surprised to read: - # /* config.h. Generated by config.status. */ - configure_input='Generated from '` - $as_echo "$*" | sed 's|^[^:]*/||;s|:[^:]*/|, |g' - `' by configure.' - if test x"$ac_file" != x-; then - configure_input="$ac_file. $configure_input" - { $as_echo "$as_me:${as_lineno-$LINENO}: creating $ac_file" >&5 -$as_echo "$as_me: creating $ac_file" >&6;} - fi - # Neutralize special characters interpreted by sed in replacement strings. - case $configure_input in #( - *\&* | *\|* | *\\* ) - ac_sed_conf_input=`$as_echo "$configure_input" | - sed 's/[\\\\&|]/\\\\&/g'`;; #( - *) ac_sed_conf_input=$configure_input;; - esac - - case $ac_tag in - *:-:* | *:-) cat >"$ac_tmp/stdin" \ - || as_fn_error $? "could not create $ac_file" "$LINENO" 5 ;; - esac - ;; - esac - - ac_dir=`$as_dirname -- "$ac_file" || -$as_expr X"$ac_file" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \ - X"$ac_file" : 'X\(//\)[^/]' \| \ - X"$ac_file" : 'X\(//\)$' \| \ - X"$ac_file" : 'X\(/\)' \| . 2>/dev/null || -$as_echo X"$ac_file" | - sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ - s//\1/ - q - } - /^X\(\/\/\)[^/].*/{ - s//\1/ - q - } - /^X\(\/\/\)$/{ - s//\1/ - q - } - /^X\(\/\).*/{ - s//\1/ - q - } - s/.*/./; q'` - as_dir="$ac_dir"; as_fn_mkdir_p - ac_builddir=. - -case "$ac_dir" in -.) ac_dir_suffix= ac_top_builddir_sub=. ac_top_build_prefix= ;; -*) - ac_dir_suffix=/`$as_echo "$ac_dir" | sed 's|^\.[\\/]||'` - # A ".." for each directory in $ac_dir_suffix. - ac_top_builddir_sub=`$as_echo "$ac_dir_suffix" | sed 's|/[^\\/]*|/..|g;s|/||'` - case $ac_top_builddir_sub in - "") ac_top_builddir_sub=. ac_top_build_prefix= ;; - *) ac_top_build_prefix=$ac_top_builddir_sub/ ;; - esac ;; -esac -ac_abs_top_builddir=$ac_pwd -ac_abs_builddir=$ac_pwd$ac_dir_suffix -# for backward compatibility: -ac_top_builddir=$ac_top_build_prefix - -case $srcdir in - .) # We are building in place. - ac_srcdir=. - ac_top_srcdir=$ac_top_builddir_sub - ac_abs_top_srcdir=$ac_pwd ;; - [\\/]* | ?:[\\/]* ) # Absolute name. - ac_srcdir=$srcdir$ac_dir_suffix; - ac_top_srcdir=$srcdir - ac_abs_top_srcdir=$srcdir ;; - *) # Relative name. - ac_srcdir=$ac_top_build_prefix$srcdir$ac_dir_suffix - ac_top_srcdir=$ac_top_build_prefix$srcdir - ac_abs_top_srcdir=$ac_pwd/$srcdir ;; -esac -ac_abs_srcdir=$ac_abs_top_srcdir$ac_dir_suffix - - - case $ac_mode in - :F) - # - # CONFIG_FILE - # - - case $INSTALL in - [\\/$]* | ?:[\\/]* ) ac_INSTALL=$INSTALL ;; - *) ac_INSTALL=$ac_top_build_prefix$INSTALL ;; - esac - ac_MKDIR_P=$MKDIR_P - case $MKDIR_P in - [\\/$]* | ?:[\\/]* ) ;; - */*) ac_MKDIR_P=$ac_top_build_prefix$MKDIR_P ;; - esac -_ACEOF - -cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1 -# If the template does not know about datarootdir, expand it. -# FIXME: This hack should be removed a few years after 2.60. -ac_datarootdir_hack=; ac_datarootdir_seen= -ac_sed_dataroot=' -/datarootdir/ { - p - q -} -/@datadir@/p -/@docdir@/p -/@infodir@/p -/@localedir@/p -/@mandir@/p' -case `eval "sed -n \"\$ac_sed_dataroot\" $ac_file_inputs"` in -*datarootdir*) ac_datarootdir_seen=yes;; -*@datadir@*|*@docdir@*|*@infodir@*|*@localedir@*|*@mandir@*) - { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: $ac_file_inputs seems to ignore the --datarootdir setting" >&5 -$as_echo "$as_me: WARNING: $ac_file_inputs seems to ignore the --datarootdir setting" >&2;} -_ACEOF -cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1 - ac_datarootdir_hack=' - s&@datadir@&$datadir&g - s&@docdir@&$docdir&g - s&@infodir@&$infodir&g - s&@localedir@&$localedir&g - s&@mandir@&$mandir&g - s&\\\${datarootdir}&$datarootdir&g' ;; -esac -_ACEOF - -# Neutralize VPATH when `$srcdir' = `.'. -# Shell code in configure.ac might set extrasub. -# FIXME: do we really want to maintain this feature? -cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1 -ac_sed_extra="$ac_vpsub -$extrasub -_ACEOF -cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1 -:t -/@[a-zA-Z_][a-zA-Z_0-9]*@/!b -s|@configure_input@|$ac_sed_conf_input|;t t -s&@top_builddir@&$ac_top_builddir_sub&;t t -s&@top_build_prefix@&$ac_top_build_prefix&;t t -s&@srcdir@&$ac_srcdir&;t t -s&@abs_srcdir@&$ac_abs_srcdir&;t t -s&@top_srcdir@&$ac_top_srcdir&;t t -s&@abs_top_srcdir@&$ac_abs_top_srcdir&;t t -s&@builddir@&$ac_builddir&;t t -s&@abs_builddir@&$ac_abs_builddir&;t t -s&@abs_top_builddir@&$ac_abs_top_builddir&;t t -s&@INSTALL@&$ac_INSTALL&;t t -s&@MKDIR_P@&$ac_MKDIR_P&;t t -$ac_datarootdir_hack -" -eval sed \"\$ac_sed_extra\" "$ac_file_inputs" | $AWK -f "$ac_tmp/subs.awk" \ - >$ac_tmp/out || as_fn_error $? "could not create $ac_file" "$LINENO" 5 - -test -z "$ac_datarootdir_hack$ac_datarootdir_seen" && - { ac_out=`sed -n '/\${datarootdir}/p' "$ac_tmp/out"`; test -n "$ac_out"; } && - { ac_out=`sed -n '/^[ ]*datarootdir[ ]*:*=/p' \ - "$ac_tmp/out"`; test -z "$ac_out"; } && - { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: $ac_file contains a reference to the variable \`datarootdir' -which seems to be undefined. Please make sure it is defined" >&5 -$as_echo "$as_me: WARNING: $ac_file contains a reference to the variable \`datarootdir' -which seems to be undefined. Please make sure it is defined" >&2;} - - rm -f "$ac_tmp/stdin" - case $ac_file in - -) cat "$ac_tmp/out" && rm -f "$ac_tmp/out";; - *) rm -f "$ac_file" && mv "$ac_tmp/out" "$ac_file";; - esac \ - || as_fn_error $? "could not create $ac_file" "$LINENO" 5 - ;; - :H) - # - # CONFIG_HEADER - # - if test x"$ac_file" != x-; then - { - $as_echo "/* $configure_input */" \ - && eval '$AWK -f "$ac_tmp/defines.awk"' "$ac_file_inputs" - } >"$ac_tmp/config.h" \ - || as_fn_error $? "could not create $ac_file" "$LINENO" 5 - if diff "$ac_file" "$ac_tmp/config.h" >/dev/null 2>&1; then - { $as_echo "$as_me:${as_lineno-$LINENO}: $ac_file is unchanged" >&5 -$as_echo "$as_me: $ac_file is unchanged" >&6;} - else - rm -f "$ac_file" - mv "$ac_tmp/config.h" "$ac_file" \ - || as_fn_error $? "could not create $ac_file" "$LINENO" 5 - fi - else - $as_echo "/* $configure_input */" \ - && eval '$AWK -f "$ac_tmp/defines.awk"' "$ac_file_inputs" \ - || as_fn_error $? "could not create -" "$LINENO" 5 - fi -# Compute "$ac_file"'s index in $config_headers. -_am_arg="$ac_file" -_am_stamp_count=1 -for _am_header in $config_headers :; do - case $_am_header in - $_am_arg | $_am_arg:* ) - break ;; - * ) - _am_stamp_count=`expr $_am_stamp_count + 1` ;; - esac -done -echo "timestamp for $_am_arg" >`$as_dirname -- "$_am_arg" || -$as_expr X"$_am_arg" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \ - X"$_am_arg" : 'X\(//\)[^/]' \| \ - X"$_am_arg" : 'X\(//\)$' \| \ - X"$_am_arg" : 'X\(/\)' \| . 2>/dev/null || -$as_echo X"$_am_arg" | - sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ - s//\1/ - q - } - /^X\(\/\/\)[^/].*/{ - s//\1/ - q - } - /^X\(\/\/\)$/{ - s//\1/ - q - } - /^X\(\/\).*/{ - s//\1/ - q - } - s/.*/./; q'`/stamp-h$_am_stamp_count - ;; - - :C) { $as_echo "$as_me:${as_lineno-$LINENO}: executing $ac_file commands" >&5 -$as_echo "$as_me: executing $ac_file commands" >&6;} - ;; - esac - - - case $ac_file$ac_mode in - "depfiles":C) test x"$AMDEP_TRUE" != x"" || { - # Older Autoconf quotes --file arguments for eval, but not when files - # are listed without --file. Let's play safe and only enable the eval - # if we detect the quoting. - case $CONFIG_FILES in - *\'*) eval set x "$CONFIG_FILES" ;; - *) set x $CONFIG_FILES ;; - esac - shift - for mf - do - # Strip MF so we end up with the name of the file. - mf=`echo "$mf" | sed -e 's/:.*$//'` - # Check whether this is an Automake generated Makefile or not. - # We used to match only the files named 'Makefile.in', but - # some people rename them; so instead we look at the file content. - # Grep'ing the first line is not enough: some people post-process - # each Makefile.in and add a new line on top of each file to say so. - # Grep'ing the whole file is not good either: AIX grep has a line - # limit of 2048, but all sed's we know have understand at least 4000. - if sed -n 's,^#.*generated by automake.*,X,p' "$mf" | grep X >/dev/null 2>&1; then - dirpart=`$as_dirname -- "$mf" || -$as_expr X"$mf" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \ - X"$mf" : 'X\(//\)[^/]' \| \ - X"$mf" : 'X\(//\)$' \| \ - X"$mf" : 'X\(/\)' \| . 2>/dev/null || -$as_echo X"$mf" | - sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ - s//\1/ - q - } - /^X\(\/\/\)[^/].*/{ - s//\1/ - q - } - /^X\(\/\/\)$/{ - s//\1/ - q - } - /^X\(\/\).*/{ - s//\1/ - q - } - s/.*/./; q'` - else - continue - fi - # Extract the definition of DEPDIR, am__include, and am__quote - # from the Makefile without running 'make'. - DEPDIR=`sed -n 's/^DEPDIR = //p' < "$mf"` - test -z "$DEPDIR" && continue - am__include=`sed -n 's/^am__include = //p' < "$mf"` - test -z "$am__include" && continue - am__quote=`sed -n 's/^am__quote = //p' < "$mf"` - # Find all dependency output files, they are included files with - # $(DEPDIR) in their names. We invoke sed twice because it is the - # simplest approach to changing $(DEPDIR) to its actual value in the - # expansion. - for file in `sed -n " - s/^$am__include $am__quote\(.*(DEPDIR).*\)$am__quote"'$/\1/p' <"$mf" | \ - sed -e 's/\$(DEPDIR)/'"$DEPDIR"'/g'`; do - # Make sure the directory exists. - test -f "$dirpart/$file" && continue - fdir=`$as_dirname -- "$file" || -$as_expr X"$file" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \ - X"$file" : 'X\(//\)[^/]' \| \ - X"$file" : 'X\(//\)$' \| \ - X"$file" : 'X\(/\)' \| . 2>/dev/null || -$as_echo X"$file" | - sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ - s//\1/ - q - } - /^X\(\/\/\)[^/].*/{ - s//\1/ - q - } - /^X\(\/\/\)$/{ - s//\1/ - q - } - /^X\(\/\).*/{ - s//\1/ - q - } - s/.*/./; q'` - as_dir=$dirpart/$fdir; as_fn_mkdir_p - # echo "creating $dirpart/$file" - echo '# dummy' > "$dirpart/$file" - done - done -} - ;; - - esac -done # for ac_tag - - -as_fn_exit 0 -_ACEOF -ac_clean_files=$ac_clean_files_save - -test $ac_write_fail = 0 || - as_fn_error $? "write failure creating $CONFIG_STATUS" "$LINENO" 5 - - -# configure is writing to config.log, and then calls config.status. -# config.status does its own redirection, appending to config.log. -# Unfortunately, on DOS this fails, as config.log is still kept open -# by configure, so config.status won't be able to write to it; its -# output is simply discarded. So we exec the FD to /dev/null, -# effectively closing config.log, so it can be properly (re)opened and -# appended to by config.status. When coming back to configure, we -# need to make the FD available again. -if test "$no_create" != yes; then - ac_cs_success=: - ac_config_status_args= - test "$silent" = yes && - ac_config_status_args="$ac_config_status_args --quiet" - exec 5>/dev/null - $SHELL $CONFIG_STATUS $ac_config_status_args || ac_cs_success=false - exec 5>>config.log - # Use ||, not &&, to avoid exiting from the if with $? = 1, which - # would make configure fail if this is the last instruction. - $ac_cs_success || as_fn_exit 1 -fi -if test -n "$ac_unrecognized_opts" && test "$enable_option_checking" != no; then - { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: unrecognized options: $ac_unrecognized_opts" >&5 -$as_echo "$as_me: WARNING: unrecognized options: $ac_unrecognized_opts" >&2;} -fi - diff --git a/distribution/yocto-advanced/poky/meta-mini/recipes-hello/autohello/files/autohello/configure.ac b/distribution/yocto-advanced/poky/meta-mini/recipes-hello/autohello/files/autohello/configure.ac deleted file mode 100644 index 8acdba3..0000000 --- a/distribution/yocto-advanced/poky/meta-mini/recipes-hello/autohello/files/autohello/configure.ac +++ /dev/null @@ -1,21 +0,0 @@ -AC_PREREQ([2.69]) -AC_INIT([autohello], [1.1], [maunt@linutronix.de]) -AM_INIT_AUTOMAKE([silent-rules]) -AC_CONFIG_SRCDIR([autohello.c]) -AC_CONFIG_HEADERS([config.h]) - -# Checks for programs. -AC_PROG_CC -AC_PROG_INSTALL -AM_PROG_CC_C_O - -# Checks for libraries. - -# Checks for header files. - -# Checks for typedefs, structures, and compiler characteristics. - -# Checks for library functions. - -AC_CONFIG_FILES([Makefile]) -AC_OUTPUT diff --git a/distribution/yocto-advanced/poky/meta-mini/recipes-hello/autohello/files/autohello/configure.scan b/distribution/yocto-advanced/poky/meta-mini/recipes-hello/autohello/files/autohello/configure.scan deleted file mode 100644 index be0eb9f..0000000 --- a/distribution/yocto-advanced/poky/meta-mini/recipes-hello/autohello/files/autohello/configure.scan +++ /dev/null @@ -1,21 +0,0 @@ -# -*- Autoconf -*- -# Process this file with autoconf to produce a configure script. - -AC_PREREQ([2.69]) -AC_INIT([FULL-PACKAGE-NAME], [VERSION], [BUG-REPORT-ADDRESS]) -AC_CONFIG_SRCDIR([autohello.c]) -AC_CONFIG_HEADERS([config.h]) - -# Checks for programs. -AC_PROG_CC - -# Checks for libraries. - -# Checks for header files. - -# Checks for typedefs, structures, and compiler characteristics. - -# Checks for library functions. - -AC_CONFIG_FILES([Makefile]) -AC_OUTPUT diff --git a/distribution/yocto-advanced/poky/meta-mini/recipes-hello/autohello/files/autohello/depcomp b/distribution/yocto-advanced/poky/meta-mini/recipes-hello/autohello/files/autohello/depcomp deleted file mode 120000 index a062b8e..0000000 --- a/distribution/yocto-advanced/poky/meta-mini/recipes-hello/autohello/files/autohello/depcomp +++ /dev/null @@ -1 +0,0 @@ -/usr/share/automake-1.14/depcomp \ No newline at end of file diff --git a/distribution/yocto-advanced/poky/meta-mini/recipes-hello/autohello/files/autohello/install-sh b/distribution/yocto-advanced/poky/meta-mini/recipes-hello/autohello/files/autohello/install-sh deleted file mode 120000 index 292a426..0000000 --- a/distribution/yocto-advanced/poky/meta-mini/recipes-hello/autohello/files/autohello/install-sh +++ /dev/null @@ -1 +0,0 @@ -/usr/share/automake-1.14/install-sh \ No newline at end of file diff --git a/distribution/yocto-advanced/poky/meta-mini/recipes-hello/autohello/files/autohello/missing b/distribution/yocto-advanced/poky/meta-mini/recipes-hello/autohello/files/autohello/missing deleted file mode 120000 index bc0fe73..0000000 --- a/distribution/yocto-advanced/poky/meta-mini/recipes-hello/autohello/files/autohello/missing +++ /dev/null @@ -1 +0,0 @@ -/usr/share/automake-1.14/missing \ No newline at end of file diff --git a/distribution/yocto-advanced/poky/meta-mini/recipes-hello/hello/files/hello.c b/distribution/yocto-advanced/poky/meta-mini/recipes-hello/hello/files/hello.c deleted file mode 100644 index f202e2f..0000000 --- a/distribution/yocto-advanced/poky/meta-mini/recipes-hello/hello/files/hello.c +++ /dev/null @@ -1,8 +0,0 @@ -#include - -int main (int argc, char **argv) -{ - printf ("hello yocto world\n"); - - return 0; -} diff --git a/distribution/yocto-advanced/poky/meta-mini/recipes-hello/hello/hello.bb b/distribution/yocto-advanced/poky/meta-mini/recipes-hello/hello/hello.bb deleted file mode 100644 index 6969b44..0000000 --- a/distribution/yocto-advanced/poky/meta-mini/recipes-hello/hello/hello.bb +++ /dev/null @@ -1,18 +0,0 @@ -DESCRIPTION = "Simple helloworld application" -SECTION = "examples" -LICENSE = "MIT" -LIC_FILES_CHKSUM = "file://${COMMON_LICENSE_DIR}/MIT;md5=0835ade698e0bcf8506ecda2f7b4f302" -PR = "r0" - -SRC_URI = "file://hello.c" - -S = "${WORKDIR}" - -do_compile() { - ${CC} hello.c -o hello -} - -do_install() { - install -d ${D}${bindir} - install -m 0755 hello ${D}${bindir} -} diff --git a/distribution/yocto-advanced/poky/meta-mini/recipes-hello/hellocm/files/hellocm-0.1.tar.bz2 b/distribution/yocto-advanced/poky/meta-mini/recipes-hello/hellocm/files/hellocm-0.1.tar.bz2 deleted file mode 100644 index 1292ea5..0000000 Binary files a/distribution/yocto-advanced/poky/meta-mini/recipes-hello/hellocm/files/hellocm-0.1.tar.bz2 and /dev/null differ diff --git a/distribution/yocto-advanced/poky/meta-mini/recipes-hello/hellocm/files/hellocm-0.1/CMakeLists.txt b/distribution/yocto-advanced/poky/meta-mini/recipes-hello/hellocm/files/hellocm-0.1/CMakeLists.txt deleted file mode 100644 index a811deb..0000000 --- a/distribution/yocto-advanced/poky/meta-mini/recipes-hello/hellocm/files/hellocm-0.1/CMakeLists.txt +++ /dev/null @@ -1,7 +0,0 @@ -CMAKE_MINIMUM_REQUIRED (VERSION 2.6) -PROJECT (hellocm) -SET (CPACK_PACKAGE_VERSION_MAJOR "0") -SET (CPACK_PACKAGE_VERSION_MINOR "1") -SET (src ${CMAKE_CURRENT_SOURCE_DIR}/hello.c) -ADD_EXECUTABLE (hellocm ${src}) -INSTALL(TARGETS hellocm RUNTIME DESTINATION bin LIBRARY DESTINATION lib) diff --git a/distribution/yocto-advanced/poky/meta-mini/recipes-hello/hellocm/files/hellocm-0.1/hello.c b/distribution/yocto-advanced/poky/meta-mini/recipes-hello/hellocm/files/hellocm-0.1/hello.c deleted file mode 100644 index f202e2f..0000000 --- a/distribution/yocto-advanced/poky/meta-mini/recipes-hello/hellocm/files/hellocm-0.1/hello.c +++ /dev/null @@ -1,8 +0,0 @@ -#include - -int main (int argc, char **argv) -{ - printf ("hello yocto world\n"); - - return 0; -} diff --git a/distribution/yocto-advanced/poky/meta-mini/recipes-hello/hellocm/hellocm_0.1.bb b/distribution/yocto-advanced/poky/meta-mini/recipes-hello/hellocm/hellocm_0.1.bb deleted file mode 100644 index c87bdec..0000000 --- a/distribution/yocto-advanced/poky/meta-mini/recipes-hello/hellocm/hellocm_0.1.bb +++ /dev/null @@ -1,10 +0,0 @@ -DESCRIPTION = "hellocm cmake example" -LICENSE = "MIT" -LIC_FILES_CHKSUM = "file://${COMMON_LICENSE_DIR}/MIT;md5=0835ade698e0bcf8506ecda2f7b4f302" -SECTION = "examples" -SRC_URI = "file://${BPN}-${PV}.tar.bz2;md5=123" -inherit cmake - -#export EXTRA_OECMAKE = '-DBLUBB="bla" - -FILES_{PN} = "${bindir}/hellocm" diff --git a/distribution/yocto-advanced/poky/meta-mini/recipes-hello/helloqt/files/helloqt-1.0.tar.bz2 b/distribution/yocto-advanced/poky/meta-mini/recipes-hello/helloqt/files/helloqt-1.0.tar.bz2 deleted file mode 100644 index 4ac91e9..0000000 Binary files a/distribution/yocto-advanced/poky/meta-mini/recipes-hello/helloqt/files/helloqt-1.0.tar.bz2 and /dev/null differ diff --git a/distribution/yocto-advanced/poky/meta-mini/recipes-hello/helloqt/files/helloqt-1.0/helloqt.pro b/distribution/yocto-advanced/poky/meta-mini/recipes-hello/helloqt/files/helloqt-1.0/helloqt.pro deleted file mode 100644 index c3cfcc0..0000000 --- a/distribution/yocto-advanced/poky/meta-mini/recipes-hello/helloqt/files/helloqt-1.0/helloqt.pro +++ /dev/null @@ -1,25 +0,0 @@ -#------------------------------------------------- -# -# Project created by QtCreator 2013-06-04T20:56:37 -# -#------------------------------------------------- - -QT += core gui - -greaterThan(QT_MAJOR_VERSION, 4): QT += widgets - -TARGET = helloqt -TEMPLATE = app - - -SOURCES += main.cpp\ - mainwindow.cpp - -HEADERS += mainwindow.h - -FORMS += mainwindow.ui - -target.path = /opt/helloqt -target.files = helloqt - -INSTALLS += target diff --git a/distribution/yocto-advanced/poky/meta-mini/recipes-hello/helloqt/files/helloqt-1.0/main.cpp b/distribution/yocto-advanced/poky/meta-mini/recipes-hello/helloqt/files/helloqt-1.0/main.cpp deleted file mode 100644 index 9e2d83c..0000000 --- a/distribution/yocto-advanced/poky/meta-mini/recipes-hello/helloqt/files/helloqt-1.0/main.cpp +++ /dev/null @@ -1,11 +0,0 @@ -#include "mainwindow.h" -#include - -int main(int argc, char *argv[]) -{ - QApplication a(argc, argv); - MainWindow w; - w.show(); - - return a.exec(); -} diff --git a/distribution/yocto-advanced/poky/meta-mini/recipes-hello/helloqt/files/helloqt-1.0/mainwindow.cpp b/distribution/yocto-advanced/poky/meta-mini/recipes-hello/helloqt/files/helloqt-1.0/mainwindow.cpp deleted file mode 100644 index 49d64fc..0000000 --- a/distribution/yocto-advanced/poky/meta-mini/recipes-hello/helloqt/files/helloqt-1.0/mainwindow.cpp +++ /dev/null @@ -1,14 +0,0 @@ -#include "mainwindow.h" -#include "ui_mainwindow.h" - -MainWindow::MainWindow(QWidget *parent) : - QMainWindow(parent), - ui(new Ui::MainWindow) -{ - ui->setupUi(this); -} - -MainWindow::~MainWindow() -{ - delete ui; -} diff --git a/distribution/yocto-advanced/poky/meta-mini/recipes-hello/helloqt/files/helloqt-1.0/mainwindow.h b/distribution/yocto-advanced/poky/meta-mini/recipes-hello/helloqt/files/helloqt-1.0/mainwindow.h deleted file mode 100644 index 112fda1..0000000 --- a/distribution/yocto-advanced/poky/meta-mini/recipes-hello/helloqt/files/helloqt-1.0/mainwindow.h +++ /dev/null @@ -1,22 +0,0 @@ -#ifndef MAINWINDOW_H -#define MAINWINDOW_H - -#include - -namespace Ui { -class MainWindow; -} - -class MainWindow : public QMainWindow -{ - Q_OBJECT - -public: - explicit MainWindow(QWidget *parent = 0); - ~MainWindow(); - -private: - Ui::MainWindow *ui; -}; - -#endif // MAINWINDOW_H diff --git a/distribution/yocto-advanced/poky/meta-mini/recipes-hello/helloqt/files/helloqt-1.0/mainwindow.ui b/distribution/yocto-advanced/poky/meta-mini/recipes-hello/helloqt/files/helloqt-1.0/mainwindow.ui deleted file mode 100644 index 6050363..0000000 --- a/distribution/yocto-advanced/poky/meta-mini/recipes-hello/helloqt/files/helloqt-1.0/mainwindow.ui +++ /dev/null @@ -1,24 +0,0 @@ - - MainWindow - - - - 0 - 0 - 400 - 300 - - - - MainWindow - - - - - - - - - - - diff --git a/distribution/yocto-advanced/poky/meta-mini/recipes-hello/helloqt/helloqt_1.0.bb b/distribution/yocto-advanced/poky/meta-mini/recipes-hello/helloqt/helloqt_1.0.bb deleted file mode 100644 index e9d7b90..0000000 --- a/distribution/yocto-advanced/poky/meta-mini/recipes-hello/helloqt/helloqt_1.0.bb +++ /dev/null @@ -1,14 +0,0 @@ -DESCRIPTION = "helloqt QT example" -LICENSE = "MIT" -LIC_FILES_CHKSUM = "file://${COMMON_LICENSE_DIR}/MIT;md5=0835ade698e0bcf8506ecda2f7b4f302" -SECTION = "examples" -SRC_URI = "file://${BPN}-${PV}.tar.bz2" - -inherit qt4e - -PR = "r4" - -do_install() { - install -d ${D}${bindir} - install -m 0755 helloqt ${D}${bindir} -} diff --git a/distribution/yocto-advanced/poky/meta-mini/recipes-kernel/COPYING.MIT b/distribution/yocto-advanced/poky/meta-mini/recipes-kernel/COPYING.MIT deleted file mode 100644 index 89de354..0000000 --- a/distribution/yocto-advanced/poky/meta-mini/recipes-kernel/COPYING.MIT +++ /dev/null @@ -1,17 +0,0 @@ -Permission is hereby granted, free of charge, to any person obtaining a copy -of this software and associated documentation files (the "Software"), to deal -in the Software without restriction, including without limitation the rights -to use, copy, modify, merge, publish, distribute, sublicense, and/or sell -copies of the Software, and to permit persons to whom the Software is -furnished to do so, subject to the following conditions: - -The above copyright notice and this permission notice shall be included in -all copies or substantial portions of the Software. - -THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR -IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, -FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE -AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER -LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, -OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN -THE SOFTWARE. diff --git a/distribution/yocto-advanced/poky/meta-mini/recipes-kernel/README b/distribution/yocto-advanced/poky/meta-mini/recipes-kernel/README deleted file mode 100644 index bd9fb9e..0000000 --- a/distribution/yocto-advanced/poky/meta-mini/recipes-kernel/README +++ /dev/null @@ -1,64 +0,0 @@ -This README file contains information on the contents of the -mini layer. - -Please see the corresponding sections below for details. - - -Dependencies -============ - -This layer depends on: - - URI: git://git.openembedded.org/bitbake - branch: master - - URI: git://git.openembedded.org/openembedded-core - layers: meta - branch: master - - URI: git://git.yoctoproject.org/xxxx - layers: xxxx - branch: master - - -Patches -======= - -Please submit any patches against the mini layer to the -xxxx mailing list (xxxx@zzzz.org) and cc: the maintainer: - -Maintainer: XXX YYYYYY - - -Table of Contents -================= - - I. Adding the mini layer to your build - II. Misc - - -I. Adding the mini layer to your build -================================================= - ---- replace with specific instructions for the mini layer --- - -In order to use this layer, you need to make the build system aware of -it. - -Assuming the mini layer exists at the top-level of your -yocto build tree, you can add it to the build system by adding the -location of the mini layer to bblayers.conf, along with any -other layers needed. e.g.: - - BBLAYERS ?= " \ - /path/to/yocto/meta \ - /path/to/yocto/meta-yocto \ - /path/to/yocto/meta-yocto-bsp \ - /path/to/yocto/meta-mini \ - " - - -II. Misc -======== - ---- replace with specific information about the mini layer --- diff --git a/distribution/yocto-advanced/poky/meta-mini/recipes-kernel/classes/fsl-dynamic-packagearch.bbclass b/distribution/yocto-advanced/poky/meta-mini/recipes-kernel/classes/fsl-dynamic-packagearch.bbclass deleted file mode 100644 index 40eae6c..0000000 --- a/distribution/yocto-advanced/poky/meta-mini/recipes-kernel/classes/fsl-dynamic-packagearch.bbclass +++ /dev/null @@ -1,47 +0,0 @@ -# Automatically set PACKAGE_ARCH for MACHINE_SOCARCH -# -# This allow to easy reuse of binary packages among similar SoCs. The -# usual use for this is to share SoC specific packages among different -# boards. -# -# MACHINE_SOCARCH_FILTER list all packages associated with -# MACHINE_SOCARCH and, when match, will set PACKAGE_ARCH as MACHINE_SOCARCH -# -# MACHINE_ARCH_FILTER list all packages associated with -# MACHINE_ARCH and, when match, will set PACKAGE_ARCH as MACHINE_ARCH -# -# For example, in meta-fsl-arm, this is used to share GPU packages for -# i.MX53 boards (as all them share the AMD GPU) and i.MX6 based boards -# (as all them share Vivante GPU). -# -# To use the class, specify, for example: -# -# MACHINE_SOCARCH_soc = "${TUNE_PKGARCH}-soc" -# -# and the need filters, as: -# -# MACHINE_ARCH_FILTER = "virtual/kernel" -# MACHINE_SOCARCH_FILTER_soc = "virtual/libgles1 ... virtual/libgl" -# -# Copyright 2013 (C) O.S. Systems Software LTDA. - -python __anonymous () { - machine_arch_filter = set((d.getVar("MACHINE_ARCH_FILTER", True) or "").split()) - machine_socarch_filter = set((d.getVar("MACHINE_SOCARCH_FILTER", True) or "").split()) - if machine_socarch_filter or machine_arch_filter: - provides = set((d.getVar("PROVIDES", True) or "").split()) - depends = set((d.getVar("DEPENDS", True) or "").split()) - PN = d.getVar("PN", True) - - package_arch = None - if list(machine_arch_filter & (provides | depends)): - package_arch = d.getVar("MACHINE_ARCH", True) - elif list(machine_socarch_filter & (provides | depends)): - package_arch = d.getVar("MACHINE_SOCARCH", True) - if not package_arch: - bb.parse.SkipPackage("You must set MACHINE_SOCARCH as MACHINE_SOCARCH_FILTER is set for this SoC.") - - if package_arch: - bb.debug(1, "Use '%s' as package archictecture for '%s'" % (package_arch, PN)) - d.setVar("PACKAGE_ARCH", package_arch) -} diff --git a/distribution/yocto-advanced/poky/meta-mini/recipes-kernel/classes/image_types_fsl.bbclass b/distribution/yocto-advanced/poky/meta-mini/recipes-kernel/classes/image_types_fsl.bbclass deleted file mode 100644 index c0fa9b6..0000000 --- a/distribution/yocto-advanced/poky/meta-mini/recipes-kernel/classes/image_types_fsl.bbclass +++ /dev/null @@ -1,319 +0,0 @@ -inherit image_types - -IMAGE_BOOTLOADER ?= "u-boot" - -# Handle u-boot suffixes -UBOOT_SUFFIX ?= "bin" -UBOOT_PADDING ?= "0" -UBOOT_SUFFIX_SDCARD ?= "${UBOOT_SUFFIX}" - -# -# Handles i.MX mxs bootstream generation -# -MXSBOOT_NAND_ARGS ?= "" - -# IMX Bootlets Linux bootstream -IMAGE_DEPENDS_linux.sb = "elftosb-native:do_populate_sysroot \ - imx-bootlets:do_deploy \ - virtual/kernel:do_deploy" -IMAGE_LINK_NAME_linux.sb = "" -IMAGE_CMD_linux.sb () { - kernel_bin="`readlink ${DEPLOY_DIR_IMAGE}/${KERNEL_IMAGETYPE}-${MACHINE}.bin`" - kernel_dtb="`readlink ${DEPLOY_DIR_IMAGE}/${KERNEL_IMAGETYPE}-${MACHINE}.dtb || true`" - linux_bd_file=imx-bootlets-linux.bd-${MACHINE} - if [ `basename $kernel_bin .bin` = `basename $kernel_dtb .dtb` ]; then - # When using device tree we build a zImage with the dtb - # appended on the end of the image - linux_bd_file=imx-bootlets-linux.bd-dtb-${MACHINE} - cat $kernel_bin $kernel_dtb \ - > $kernel_bin-dtb - rm -f ${DEPLOY_DIR_IMAGE}/${KERNEL_IMAGETYPE}-${MACHINE}.bin-dtb - ln -s $kernel_bin-dtb ${DEPLOY_DIR_IMAGE}/${KERNEL_IMAGETYPE}-${MACHINE}.bin-dtb - fi - - # Ensure the file is generated - rm -f ${DEPLOY_DIR_IMAGE}/${IMAGE_NAME}.linux.sb - (cd ${DEPLOY_DIR_IMAGE}; elftosb -z -c $linux_bd_file -o ${IMAGE_NAME}.linux.sb) - - # Remove the appended file as it is only used here - rm -f ${DEPLOY_DIR_IMAGE}/$kernel_bin-dtb -} - -# IMX Bootlets barebox bootstream -IMAGE_DEPENDS_barebox.mxsboot-sdcard = "elftosb-native:do_populate_sysroot \ - u-boot-mxsboot-native:do_populate_sysroot \ - imx-bootlets:do_deploy \ - barebox:do_deploy" -IMAGE_CMD_barebox.mxsboot-sdcard () { - barebox_bd_file=imx-bootlets-barebox_ivt.bd-${MACHINE} - - # Ensure the files are generated - (cd ${DEPLOY_DIR_IMAGE}; rm -f ${IMAGE_NAME}.barebox.sb ${IMAGE_NAME}.barebox.mxsboot-sdcard; \ - elftosb -f mx28 -z -c $barebox_bd_file -o ${IMAGE_NAME}.barebox.sb; \ - mxsboot sd ${IMAGE_NAME}.barebox.sb ${IMAGE_NAME}.barebox.mxsboot-sdcard) -} - -# U-Boot mxsboot generation to SD-Card -UBOOT_SUFFIX_SDCARD_mxs ?= "mxsboot-sdcard" -IMAGE_DEPENDS_uboot.mxsboot-sdcard = "u-boot-mxsboot-native:do_populate_sysroot \ - u-boot:do_deploy" -IMAGE_CMD_uboot.mxsboot-sdcard = "mxsboot sd ${DEPLOY_DIR_IMAGE}/u-boot-${MACHINE}.${UBOOT_SUFFIX} \ - ${DEPLOY_DIR_IMAGE}/${IMAGE_NAME}.rootfs.uboot.mxsboot-sdcard" - -IMAGE_DEPENDS_uboot.mxsboot-nand = "u-boot-mxsboot-native:do_populate_sysroot \ - u-boot:do_deploy" -IMAGE_CMD_uboot.mxsboot-nand = "mxsboot ${MXSBOOT_NAND_ARGS} nand \ - ${DEPLOY_DIR_IMAGE}/u-boot-${MACHINE}.${UBOOT_SUFFIX} \ - ${DEPLOY_DIR_IMAGE}/${IMAGE_NAME}.rootfs.uboot.mxsboot-nand" - -# Boot partition volume id -BOOTDD_VOLUME_ID ?= "Boot ${MACHINE}" - -# Boot partition size [in KiB] -BOOT_SPACE ?= "8192" - -# Barebox environment size [in KiB] -BAREBOX_ENV_SPACE ?= "512" - -# Set alignment to 4MB [in KiB] -IMAGE_ROOTFS_ALIGNMENT = "4096" - -IMAGE_DEPENDS_sdcard = "parted-native:do_populate_sysroot \ - dosfstools-native:do_populate_sysroot \ - mtools-native:do_populate_sysroot \ - virtual/kernel:do_deploy \ - ${@d.getVar('IMAGE_BOOTLOADER', True) and d.getVar('IMAGE_BOOTLOADER', True) + ':do_deploy' or ''}" - -SDCARD = "${DEPLOY_DIR_IMAGE}/${IMAGE_NAME}.rootfs.sdcard" - -SDCARD_GENERATION_COMMAND_mxs = "generate_mxs_sdcard" -SDCARD_GENERATION_COMMAND_mx25 = "generate_imx_sdcard" -SDCARD_GENERATION_COMMAND_mx5 = "generate_imx_sdcard" -SDCARD_GENERATION_COMMAND_mx6 = "generate_imx_sdcard" -SDCARD_GENERATION_COMMAND_vf60 = "generate_imx_sdcard" - -# -# Create an image that can by written onto a SD card using dd for use -# with i.MX SoC family -# -# External variables needed: -# ${SDCARD_ROOTFS} - the rootfs image to incorporate -# ${IMAGE_BOOTLOADER} - bootloader to use {u-boot, barebox} -# -# The disk layout used is: -# -# 0 -> IMAGE_ROOTFS_ALIGNMENT - reserved to bootloader (not partitioned) -# IMAGE_ROOTFS_ALIGNMENT -> BOOT_SPACE - kernel and other data -# BOOT_SPACE -> SDIMG_SIZE - rootfs -# -# Default Free space = 1.3x -# Use IMAGE_OVERHEAD_FACTOR to add more space -# <---------> -# 4MiB 8MiB SDIMG_ROOTFS 4MiB -# <-----------------------> <----------> <----------------------> <------------------------------> -# ------------------------ ------------ ------------------------ ------------------------------- -# | IMAGE_ROOTFS_ALIGNMENT | BOOT_SPACE | ROOTFS_SIZE | IMAGE_ROOTFS_ALIGNMENT | -# ------------------------ ------------ ------------------------ ------------------------------- -# ^ ^ ^ ^ ^ -# | | | | | -# 0 4096 4MiB + 8MiB 4MiB + 8Mib + SDIMG_ROOTFS 4MiB + 8MiB + SDIMG_ROOTFS + 4MiB -generate_imx_sdcard () { - # Create partition table - parted -s ${SDCARD} mklabel msdos - parted -s ${SDCARD} unit KiB mkpart primary fat32 ${IMAGE_ROOTFS_ALIGNMENT} $(expr ${IMAGE_ROOTFS_ALIGNMENT} \+ ${BOOT_SPACE_ALIGNED}) - parted -s ${SDCARD} unit KiB mkpart primary $(expr ${IMAGE_ROOTFS_ALIGNMENT} \+ ${BOOT_SPACE_ALIGNED}) $(expr ${IMAGE_ROOTFS_ALIGNMENT} \+ ${BOOT_SPACE_ALIGNED} \+ $ROOTFS_SIZE) - parted ${SDCARD} print - - # Burn bootloader - case "${IMAGE_BOOTLOADER}" in - imx-bootlets) - bberror "The imx-bootlets is not supported for i.MX based machines" - exit 1 - ;; - u-boot) - if [ -n "${SPL_BINARY}" ]; then - dd if=${DEPLOY_DIR_IMAGE}/${SPL_BINARY} of=${SDCARD} conv=notrunc seek=2 bs=512 - dd if=${DEPLOY_DIR_IMAGE}/u-boot-${MACHINE}.${UBOOT_SUFFIX_SDCARD} of=${SDCARD} conv=notrunc seek=42 bs=1K - else - dd if=${DEPLOY_DIR_IMAGE}/u-boot-${MACHINE}.${UBOOT_SUFFIX_SDCARD} of=${SDCARD} conv=notrunc seek=2 skip=${UBOOT_PADDING} bs=512 - fi - ;; - barebox) - dd if=${DEPLOY_DIR_IMAGE}/barebox-${MACHINE}.bin of=${SDCARD} conv=notrunc seek=1 skip=1 bs=512 - dd if=${DEPLOY_DIR_IMAGE}/bareboxenv-${MACHINE}.bin of=${SDCARD} conv=notrunc seek=1 bs=512k - ;; - "") - ;; - *) - bberror "Unkown IMAGE_BOOTLOADER value" - exit 1 - ;; - esac - - # Create boot partition image - BOOT_BLOCKS=$(LC_ALL=C parted -s ${SDCARD} unit b print \ - | awk '/ 1 / { print substr($4, 1, length($4 -1)) / 1024 }') - mkfs.vfat -n "${BOOTDD_VOLUME_ID}" -S 512 -C ${WORKDIR}/boot.img $BOOT_BLOCKS - mcopy -i ${WORKDIR}/boot.img -s ${DEPLOY_DIR_IMAGE}/${KERNEL_IMAGETYPE}-${MACHINE}.bin ::/${KERNEL_IMAGETYPE} - - # Copy boot scripts - for item in ${BOOT_SCRIPTS}; do - src=`echo $item | awk -F':' '{ print $1 }'` - dst=`echo $item | awk -F':' '{ print $2 }'` - - mcopy -i ${WORKDIR}/boot.img -s ${DEPLOY_DIR_IMAGE}/$src ::/$dst - done - - # Copy device tree file - if test -n "${KERNEL_DEVICETREE}"; then - for DTS_FILE in ${KERNEL_DEVICETREE}; do - DTS_BASE_NAME=`basename ${DTS_FILE} | awk -F "." '{print $1}'` - if [ -e "${KERNEL_IMAGETYPE}-${DTS_BASE_NAME}.dtb" ]; then - kernel_bin="`readlink ${KERNEL_IMAGETYPE}-${MACHINE}.bin`" - kernel_bin_for_dtb="`readlink ${KERNEL_IMAGETYPE}-${DTS_BASE_NAME}.dtb | sed "s,$DTS_BASE_NAME,${MACHINE},g;s,\.dtb$,.bin,g"`" - if [ $kernel_bin = $kernel_bin_for_dtb ]; then - mcopy -i ${WORKDIR}/boot.img -s ${DEPLOY_DIR_IMAGE}/${KERNEL_IMAGETYPE}-${DTS_BASE_NAME}.dtb ::/${DTS_BASE_NAME}.dtb - fi - fi - done - fi - - # Burn Partition - dd if=${WORKDIR}/boot.img of=${SDCARD} conv=notrunc seek=1 bs=$(expr ${IMAGE_ROOTFS_ALIGNMENT} \* 1024) && sync && sync - dd if=${SDCARD_ROOTFS} of=${SDCARD} conv=notrunc seek=1 bs=$(expr ${BOOT_SPACE_ALIGNED} \* 1024 + ${IMAGE_ROOTFS_ALIGNMENT} \* 1024) && sync && sync -} - -# -# Create an image that can by written onto a SD card using dd for use -# with i.MXS SoC family -# -# External variables needed: -# ${SDCARD_ROOTFS} - the rootfs image to incorporate -# ${IMAGE_BOOTLOADER} - bootloader to use {imx-bootlets, u-boot} -# -generate_mxs_sdcard () { - # Create partition table - parted -s ${SDCARD} mklabel msdos - - case "${IMAGE_BOOTLOADER}" in - imx-bootlets) - # The disk layout used is: - # - # 0 -> 1024 - Unused (not partitioned) - # 1024 -> BOOT_SPACE - kernel and other data (bootstream) - # BOOT_SPACE -> SDIMG_SIZE - rootfs - # - # Default Free space = 1.3x - # Use IMAGE_OVERHEAD_FACTOR to add more space - # <---------> - # 1024 8MiB SDIMG_ROOTFS 4MiB - # <-------> <----------> <----------------------> <------------------------------> - # --------------------- ------------------------ ------------------------------- - # | Unused | BOOT_SPACE | ROOTFS_SIZE | IMAGE_ROOTFS_ALIGNMENT | - # --------------------- ------------------------ ------------------------------- - # ^ ^ ^ ^ ^ - # | | | | | - # 0 1024 1024 + 8MiB 1024 + 8Mib + SDIMG_ROOTFS 1024 + 8MiB + SDIMG_ROOTFS + 4MiB - parted -s ${SDCARD} unit KiB mkpart primary 1024 $(expr ${IMAGE_ROOTFS_ALIGNMENT} \+ ${BOOT_SPACE_ALIGNED}) - parted -s ${SDCARD} unit KiB mkpart primary $(expr ${IMAGE_ROOTFS_ALIGNMENT} \+ ${BOOT_SPACE_ALIGNED}) $(expr ${IMAGE_ROOTFS_ALIGNMENT} \+ ${BOOT_SPACE_ALIGNED} \+ $ROOTFS_SIZE) - - # Empty 4 bytes from boot partition - dd if=/dev/zero of=${SDCARD} conv=notrunc seek=2048 count=4 - - # Write the bootstream in (2048 + 4) bytes - dd if=${DEPLOY_DIR_IMAGE}/${IMAGE_NAME}.linux.sb of=${SDCARD} conv=notrunc seek=1 seek=2052 - ;; - u-boot) - # The disk layout used is: - # - # 1M - 2M - reserved to bootloader and other data - # 2M - BOOT_SPACE - kernel - # BOOT_SPACE - SDCARD_SIZE - rootfs - # - # The disk layout used is: - # - # 1M -> 2M - reserved to bootloader and other data - # 2M -> BOOT_SPACE - kernel and other data - # BOOT_SPACE -> SDIMG_SIZE - rootfs - # - # Default Free space = 1.3x - # Use IMAGE_OVERHEAD_FACTOR to add more space - # <---------> - # 4MiB 8MiB SDIMG_ROOTFS 4MiB - # <-----------------------> <-------------> <----------------------> <------------------------------> - # ---------------------------------------- ------------------------ ------------------------------- - # | | | |ROOTFS_SIZE | IMAGE_ROOTFS_ALIGNMENT | - # ---------------------------------------- ------------------------ ------------------------------- - # ^ ^ ^ ^ ^ ^ ^ - # | | | | | | | - # 0 1M 2M 4M 4MiB + BOOTSPACE 4MiB + BOOTSPACE + SDIMG_ROOTFS 4MiB + BOOTSPACE + SDIMG_ROOTFS + 4MiB - # - parted -s ${SDCARD} unit KiB mkpart primary 1024 2048 - parted -s ${SDCARD} unit KiB mkpart primary 2048 $(expr ${IMAGE_ROOTFS_ALIGNMENT} \+ ${BOOT_SPACE_ALIGNED}) - parted -s ${SDCARD} unit KiB mkpart primary $(expr ${IMAGE_ROOTFS_ALIGNMENT} \+ ${BOOT_SPACE_ALIGNED}) $(expr ${IMAGE_ROOTFS_ALIGNMENT} \+ ${BOOT_SPACE_ALIGNED} \+ $ROOTFS_SIZE) - - dd if=${DEPLOY_DIR_IMAGE}/${IMAGE_NAME}.rootfs.uboot.mxsboot-sdcard of=${SDCARD} conv=notrunc seek=1 skip=${UBOOT_PADDING} bs=$(expr 1024 \* 1024) - BOOT_BLOCKS=$(LC_ALL=C parted -s ${SDCARD} unit b print \ - | awk '/ 2 / { print substr($4, 1, length($4 -1)) / 1024 }') - - mkfs.vfat -n "${BOOTDD_VOLUME_ID}" -S 512 -C ${WORKDIR}/boot.img $BOOT_BLOCKS - mcopy -i ${WORKDIR}/boot.img -s ${DEPLOY_DIR_IMAGE}/${KERNEL_IMAGETYPE}-${MACHINE}.bin ::/${KERNEL_IMAGETYPE} - if test -n "${KERNEL_DEVICETREE}"; then - for DTS_FILE in ${KERNEL_DEVICETREE}; do - DTS_BASE_NAME=`basename ${DTS_FILE} | awk -F "." '{print $1}'` - if [ -e "${KERNEL_IMAGETYPE}-${DTS_BASE_NAME}.dtb" ]; then - kernel_bin="`readlink ${KERNEL_IMAGETYPE}-${MACHINE}.bin`" - kernel_bin_for_dtb="`readlink ${KERNEL_IMAGETYPE}-${DTS_BASE_NAME}.dtb | sed "s,$DTS_BASE_NAME,${MACHINE},g;s,\.dtb$,.bin,g"`" - if [ $kernel_bin = $kernel_bin_for_dtb ]; then - mcopy -i ${WORKDIR}/boot.img -s ${DEPLOY_DIR_IMAGE}/${KERNEL_IMAGETYPE}-${DTS_BASE_NAME}.dtb ::/${DTS_BASE_NAME}.dtb - fi - fi - done - fi - - dd if=${WORKDIR}/boot.img of=${SDCARD} conv=notrunc seek=2 bs=$(expr 1024 \* 1024) - ;; - barebox) - # BAREBOX_ENV_SPACE is taken on BOOT_SPACE_ALIGNED but it doesn't really matter as long as the rootfs is aligned - parted -s ${SDCARD} unit KiB mkpart primary 1024 $(expr ${IMAGE_ROOTFS_ALIGNMENT} \+ ${BOOT_SPACE_ALIGNED} - ${BAREBOX_ENV_SPACE}) - parted -s ${SDCARD} unit KiB mkpart primary $(expr ${IMAGE_ROOTFS_ALIGNMENT} \+ ${BOOT_SPACE_ALIGNED} - ${BAREBOX_ENV_SPACE}) $(expr ${IMAGE_ROOTFS_ALIGNMENT} \+ ${BOOT_SPACE_ALIGNED}) - parted -s ${SDCARD} unit KiB mkpart primary $(expr ${IMAGE_ROOTFS_ALIGNMENT} \+ ${BOOT_SPACE_ALIGNED}) $(expr ${IMAGE_ROOTFS_ALIGNMENT} \+ ${BOOT_SPACE_ALIGNED} \+ $ROOTFS_SIZE) - - dd if=${DEPLOY_DIR_IMAGE}/${IMAGE_NAME}.barebox.mxsboot-sdcard of=${SDCARD} conv=notrunc seek=1 bs=$(expr 1024 \* 1024) - dd if=${DEPLOY_DIR_IMAGE}/bareboxenv-${MACHINE}.bin of=${SDCARD} conv=notrunc seek=$(expr ${IMAGE_ROOTFS_ALIGNMENT} \+ ${BOOT_SPACE_ALIGNED} - ${BAREBOX_ENV_SPACE}) bs=1024 - ;; - *) - bberror "Unkown IMAGE_BOOTLOADER value" - exit 1 - ;; - esac - - # Change partition type for mxs processor family - bbnote "Setting partition type to 0x53 as required for mxs' SoC family." - echo -n S | dd of=${SDCARD} bs=1 count=1 seek=450 conv=notrunc - - parted ${SDCARD} print - - dd if=${SDCARD_ROOTFS} of=${SDCARD} conv=notrunc seek=1 bs=$(expr ${BOOT_SPACE_ALIGNED} \* 1024 + ${IMAGE_ROOTFS_ALIGNMENT} \* 1024) && sync && sync -} - -IMAGE_CMD_sdcard () { - if [ -z "${SDCARD_ROOTFS}" ]; then - bberror "SDCARD_ROOTFS is undefined. To use sdcard image from Freescale's BSP it needs to be defined." - exit 1 - fi - - # Align boot partition and calculate total SD card image size - BOOT_SPACE_ALIGNED=$(expr ${BOOT_SPACE} + ${IMAGE_ROOTFS_ALIGNMENT} - 1) - BOOT_SPACE_ALIGNED=$(expr ${BOOT_SPACE_ALIGNED} - ${BOOT_SPACE_ALIGNED} % ${IMAGE_ROOTFS_ALIGNMENT}) - SDCARD_SIZE=$(expr ${IMAGE_ROOTFS_ALIGNMENT} + ${BOOT_SPACE_ALIGNED} + $ROOTFS_SIZE + ${IMAGE_ROOTFS_ALIGNMENT}) - - # Initialize a sparse file - dd if=/dev/zero of=${SDCARD} bs=1 count=0 seek=$(expr 1024 \* ${SDCARD_SIZE}) - - ${SDCARD_GENERATION_COMMAND} -} - -# The sdcard requires the rootfs filesystem to be built before using -# it so we must make this dependency explicit. -IMAGE_TYPEDEP_sdcard = "${@d.getVar('SDCARD_ROOTFS', 1).split('.')[-1]}" diff --git a/distribution/yocto-advanced/poky/meta-mini/recipes-kernel/conf/distro/lxt.conf b/distribution/yocto-advanced/poky/meta-mini/recipes-kernel/conf/distro/lxt.conf deleted file mode 100644 index 85aef9c..0000000 --- a/distribution/yocto-advanced/poky/meta-mini/recipes-kernel/conf/distro/lxt.conf +++ /dev/null @@ -1,141 +0,0 @@ -# Distribution definition for: lxt -# -# Copyright (c) 2011, Intel Corporation. -# All rights reserved. -# -# This file is released under the MIT license as described in -# ../meta/COPYING.MIT. -# -# Poky-tiny is intended to define a tiny Linux system comprised of a -# Linux kernel tailored to support each specific MACHINE and busybox. -# Poky-tiny sets some basic policy to ensure a usable system while still -# keeping the rootfs and kernel image as small as possible. -# -# The policies defined are intended to meet the following goals: -# o Serial consoles only (no framebuffer or VGA console) -# o Basic support for IPV4 networking -# o Single user ash shell -# o Static images (no support for adding packages or libraries later) -# o Read-only or RAMFS root filesystem -# o Combined Linux kernel + rootfs in under 4MB -# o Allow the user to select between eglibc or uclibc with the TCLIBC variable -# -# This is currently a partial definition, the following tasks remain: -# [ ] Integrate linux-yocto-tiny ktype into linux-yocto -# [ ] Define linux-yocto-tiny configs for all supported BSPs -# [ ] Drop ldconfig from the installation -# [ ] Modify the runqemu scripts to work with ext2 parameter: -# runqemu qemux86 qemuparams="-nographic" bootparams="console=ttyS0,115200 root=0800" -# [ ] Modify busybox to allow for DISTRO_FEATURES-like confiruration - -require conf/distro/poky.conf -DISTRO = "lxt" - -# FIXME: consider adding a new "tiny" feature -#DISTRO_FEATURES_append = " tiny" - -# Distro config is evaluated after the machine config, so we have to explicitly -# set the kernel provider to override a machine config. -PREFERRED_PROVIDER_virtual/kernel = "linux-yocto-tiny" -PREFERRED_VERSION_linux-yocto-tiny = "3.8%" - -# We can use packagegroup-core-boot, but in the future we may need a new packagegroup-core-tiny -#POKY_DEFAULT_EXTRA_RDEPENDS += "packagegroup-core-boot" -# Drop kernel-module-af-packet from RRECOMMENDS -POKY_DEFAULT_EXTRA_RRECOMMENDS = "" - -# FIXME: what should we do with this? -TCLIBCAPPEND = "" - -# Disable wide char support for ncurses as we don't include it in -# in the LIBC features below. -ENABLE_WIDEC="false" - -# Drop native language support. This removes the -# eglibc->bash->gettext->libc-posix-clang-wchar dependency. -USE_NLS="no" - -# Reconfigure eglibc for a smaller installation -# Comment out any of the lines below to disable them in the build -DISTRO_FEATURES_LIBC_TINY = "libc-libm libc-crypt" -DISTRO_FEATURES_LIBC_TINY_append_x86-64 = " libc-libm-big" - -# Required for "who" -DISTRO_FEATURES_LIBC_MINIMAL = "libc-utmp libc-getlogin" -DISTRO_FEATURES_LIBC_REGEX = "libc-posix-regexp" -DISTRO_FEATURES_LIBC_NET = "libc-inet libc-nis" - -DISTRO_FEATURES_LIBC = "${DISTRO_FEATURES_LIBC_TINY} \ - ${DISTRO_FEATURES_LIBC_MINIMAL} \ - ${DISTRO_FEATURES_LIBC_REGEX} \ - ${DISTRO_FEATURES_LIBC_NET} \ - " - -# Comment out any of the lines below to disable them in the build -# DISTRO_FEATURES options: -# alsa bluetooth ext2 irda pcmcia usbgadget usbhost wifi nfs zeroconf pci -DISTRO_FEATURES_TINY = "pci" -DISTRO_FEATURES_NET = "ipv4" -DISTRO_FEATURES_USB = "usbhost" -#DISTRO_FEATURES_USBGADGET = "usbgadget" -#DISTRO_FEATURES_WIFI = "wifi" - -DISTRO_FEATURES = "${DISTRO_FEATURES_TINY} \ - ${DISTRO_FEATURES_NET} \ - ${DISTRO_FEATURES_USB} \ - ${DISTRO_FEATURES_USBGADGET} \ - ${DISTRO_FEATURES_WIFI} \ - ${DISTRO_FEATURES_LIBC} \ - " - -# Enable LFS - see bug YOCTO #5865 -DISTRO_FEATURES_append_libc-uclibc = " largefile" - -# Use tmpdevfs and the busybox runtime services -VIRTUAL-RUNTIME_dev_manager = "" -VIRTUAL-RUNTIME_login_manager = "" -VIRTUAL-RUNTIME_init_manager = "tiny-init" -VIRTUAL-RUNTIME_keymaps = "" - -# FIXME: Consider adding "modules" to MACHINE_FEATURES and using that in -# packagegroup-core-base to select modutils-initscripts or not. Similar with "net" and -# netbase. - -# By default we only support ext2 and initramfs. We don't build live as that -# pulls in a lot of dependencies for the live image and the installer, like -# udev, grub, etc. These pull in gettext, which fails to build with wide -# character support. -IMAGE_FSTYPES = "sdcard ext3 tar.gz" - -# Drop v86d from qemu dependency list (we support serial) -# Drop grub from meta-intel BSPs -# FIXME: A different mechanism is needed here. We could define -tiny -# variants of all compatible machines, but that leads to a lot -# more machine configs to maintain long term. -MACHINE_ESSENTIAL_EXTRA_RDEPENDS = "" - -# The mtrace script included by eglibc is a perl script. This means the system -# will build perl in case this package is installed. Since we don't care about -# this script for the purposes of tiny, remove the dependency from here. -RDEPENDS_${PN}-mtrace_pn-eglibc = "" - -INHERIT += "blacklist" -PNBLACKLIST[build-appliance-image] = "not buildable with lxt" -PNBLACKLIST[core-image-base] = "not buildable with lxt" -PNBLACKLIST[core-image-clutter] = "not buildable with lxt" -PNBLACKLIST[core-image-directfb] = "not buildable with lxt" -PNBLACKLIST[core-image-full-cmdline] = "not buildable with lxt" -PNBLACKLIST[core-image-lsb] = "not buildable with lxt" -PNBLACKLIST[core-image-lsb-dev] = "not buildable with lxt" -PNBLACKLIST[core-image-lsb-sdk] = "not buildable with lxt" -PNBLACKLIST[core-image-rt] = "not buildable with lxt" -PNBLACKLIST[core-image-rt-sdk] = "not buildable with lxt" -PNBLACKLIST[core-image-sato] = "not buildable with lxt" -PNBLACKLIST[core-image-sato-dev] = "not buildable with lxt" -PNBLACKLIST[core-image-sato-sdk] = "not buildable with lxt" -PNBLACKLIST[core-image-x11] = "not buildable with lxt" -PNBLACKLIST[qt4e-demo-image] = "not buildable with lxt" -PNBLACKLIST[core-image-weston] = "not buildable with lxt" - -# Disable python usage in opkg-utils since it won't build with tiny config -PACKAGECONFIG_pn-opkg-utils = "" diff --git a/distribution/yocto-advanced/poky/meta-mini/recipes-kernel/conf/layer.conf b/distribution/yocto-advanced/poky/meta-mini/recipes-kernel/conf/layer.conf deleted file mode 100644 index b1c4f1e..0000000 --- a/distribution/yocto-advanced/poky/meta-mini/recipes-kernel/conf/layer.conf +++ /dev/null @@ -1,10 +0,0 @@ -# We have a conf and classes directory, add to BBPATH -BBPATH .= ":${LAYERDIR}" - -# We have recipes-* directories, add to BBFILES -BBFILES += "${LAYERDIR}/recipes-*/*/*.bb \ - ${LAYERDIR}/recipes-*/*/*.bbappend" - -BBFILE_COLLECTIONS += "mini" -BBFILE_PATTERN_mini = "^${LAYERDIR}/" -BBFILE_PRIORITY_mini = "7" diff --git a/distribution/yocto-advanced/poky/meta-mini/recipes-kernel/conf/machine/imx6qsabrelite.conf b/distribution/yocto-advanced/poky/meta-mini/recipes-kernel/conf/machine/imx6qsabrelite.conf deleted file mode 100644 index 0de7f20..0000000 --- a/distribution/yocto-advanced/poky/meta-mini/recipes-kernel/conf/machine/imx6qsabrelite.conf +++ /dev/null @@ -1,34 +0,0 @@ -#@TYPE: Machine -#@NAME: SabreLite -#@SOC: i.MX6Q -#@DESCRIPTION: Machine configuration for Boundary Devices SabreLite -#@MAINTAINER: Manuel Traut - -include conf/machine/include/imx-base.inc -include conf/machine/include/tune-cortexa9.inc - -SOC_FAMILY = "mx6:mx6dl:mx6q" - -PREFERRED_PROVIDER_virtual/kernel = "linux-vanilla" -KERNEL_DEVICETREE = "imx6q-sabrelite.dtb" - -# Ensure boot scripts will be available at rootfs time -do_rootfs[depends] += "u-boot-script:do_deploy" - -# Boot scripts to install -BOOT_SCRIPTS = "6x_bootscript-${MACHINE}:6x_bootscript" - -UBOOT_MACHINE ?= "nitrogen6q_config" -SERIAL_CONSOLE = "115200 ttymxc1" - -IMAGE_FSTYPES += "tar.bz2 ext3" - -# avoid this error -# ERROR: QA Issue: eglibc-locale: Files/directories were installed but not -# shipped -# /usr/bin -# /usr/lib -# /usr/share/i18n -# /usr/share/i18n/locales -# /usr/share/i18n/locales/POSIX -ENABLE_BINARY_LOCALE_GENERATION = "0" diff --git a/distribution/yocto-advanced/poky/meta-mini/recipes-kernel/conf/machine/include/fsl-default-settings.inc b/distribution/yocto-advanced/poky/meta-mini/recipes-kernel/conf/machine/include/fsl-default-settings.inc deleted file mode 100644 index b36e75a..0000000 --- a/distribution/yocto-advanced/poky/meta-mini/recipes-kernel/conf/machine/include/fsl-default-settings.inc +++ /dev/null @@ -1,3 +0,0 @@ -# Freescale BSP default settings - -IMAGE_CLASSES += "image_types_fsl" diff --git a/distribution/yocto-advanced/poky/meta-mini/recipes-kernel/conf/machine/include/imx-base.inc b/distribution/yocto-advanced/poky/meta-mini/recipes-kernel/conf/machine/include/imx-base.inc deleted file mode 100644 index fcd45ff..0000000 --- a/distribution/yocto-advanced/poky/meta-mini/recipes-kernel/conf/machine/include/imx-base.inc +++ /dev/null @@ -1,38 +0,0 @@ -# Provides the i.MX common settings - -include conf/machine/include/fsl-default-settings.inc -include conf/machine/include/soc-family.inc - -# Set specific make target and binary suffix -UBOOT_MAKE_TARGET = "u-boot.imx" -UBOOT_SUFFIX ?= "imx" - -UBOOT_ENTRYPOINT_mx3 = "0x80008000" -UBOOT_ENTRYPOINT_mx51 = "0x90008000" -UBOOT_ENTRYPOINT_mx53 = "0x70008000" -UBOOT_ENTRYPOINT_mx6 = "0x10008000" -UBOOT_ENTRYPOINT_mx6sl = "0x80008000" -UBOOT_ENTRYPOINT_vf60 = "0x80008000" - -# Float-Point setting -DEFAULTTUNE_mx6 ?= "cortexa9hf-neon" - -# Sub-architecture support -MACHINE_SOCARCH ?= "" -MACHINE_SOCARCH_mx3 = "${TUNE_PKGARCH}-mx3" -MACHINE_SOCARCH_mx5 = "${TUNE_PKGARCH}-mx5" -MACHINE_SOCARCH_mx6 = "${TUNE_PKGARCH}-mx6" -MACHINE_SOCARCH_vf60 = "${TUNE_PKGARCH}-vf60" -PACKAGE_EXTRA_ARCHS_append = " ${MACHINE_SOCARCH}" - -MACHINE_ARCH_FILTER = "virtual/kernel" -INHERIT += "fsl-dynamic-packagearch" - -SDCARD_ROOTFS ?= "${DEPLOY_DIR_IMAGE}/${IMAGE_NAME}.rootfs.ext3" -IMAGE_FSTYPES ?= "tar.bz2 ext3 sdcard" - -SERIAL_CONSOLE = "115200 ttymxc0" - -KERNEL_IMAGETYPE = "uImage" - -MACHINE_FEATURES = "" diff --git a/distribution/yocto-advanced/poky/meta-mini/recipes-kernel/conf/machine/include/imx6sabreauto-common.inc b/distribution/yocto-advanced/poky/meta-mini/recipes-kernel/conf/machine/include/imx6sabreauto-common.inc deleted file mode 100644 index e35bc82..0000000 --- a/distribution/yocto-advanced/poky/meta-mini/recipes-kernel/conf/machine/include/imx6sabreauto-common.inc +++ /dev/null @@ -1,6 +0,0 @@ -# Provides the i.MX6 SABRE AUTO common settings - -require conf/machine/include/imx-base.inc -require conf/machine/include/tune-cortexa9.inc - -SERIAL_CONSOLE = "115200 ttymxc3" diff --git a/distribution/yocto-advanced/poky/meta-mini/recipes-kernel/conf/machine/include/imx6sabresd-common.inc b/distribution/yocto-advanced/poky/meta-mini/recipes-kernel/conf/machine/include/imx6sabresd-common.inc deleted file mode 100644 index 21a23b8..0000000 --- a/distribution/yocto-advanced/poky/meta-mini/recipes-kernel/conf/machine/include/imx6sabresd-common.inc +++ /dev/null @@ -1,6 +0,0 @@ -# Provides the i.MX6 SABRE SD common settings - -require conf/machine/include/imx-base.inc -require conf/machine/include/tune-cortexa9.inc - -SERIAL_CONSOLE = "115200 ttymxc0" diff --git a/distribution/yocto-advanced/poky/meta-mini/recipes-kernel/linux-vanilla/files/beaglebone-black/defconfig b/distribution/yocto-advanced/poky/meta-mini/recipes-kernel/linux-vanilla/files/beaglebone-black/defconfig deleted file mode 100644 index 536a137..0000000 --- a/distribution/yocto-advanced/poky/meta-mini/recipes-kernel/linux-vanilla/files/beaglebone-black/defconfig +++ /dev/null @@ -1,308 +0,0 @@ -CONFIG_SYSVIPC=y -CONFIG_POSIX_MQUEUE=y -CONFIG_NO_HZ=y -CONFIG_HIGH_RES_TIMERS=y -CONFIG_BSD_PROCESS_ACCT=y -CONFIG_IKCONFIG=y -CONFIG_IKCONFIG_PROC=y -CONFIG_LOG_BUF_SHIFT=16 -CONFIG_BLK_DEV_INITRD=y -CONFIG_EXPERT=y -CONFIG_SLAB=y -CONFIG_PROFILING=y -CONFIG_OPROFILE=y -CONFIG_KPROBES=y -CONFIG_MODULES=y -CONFIG_MODULE_FORCE_LOAD=y -CONFIG_MODULE_UNLOAD=y -CONFIG_MODULE_FORCE_UNLOAD=y -CONFIG_MODVERSIONS=y -CONFIG_MODULE_SRCVERSION_ALL=y -# CONFIG_BLK_DEV_BSG is not set -CONFIG_PARTITION_ADVANCED=y -CONFIG_ARCH_MULTI_V6=y -CONFIG_POWER_AVS_OMAP=y -CONFIG_POWER_AVS_OMAP_CLASS3=y -CONFIG_OMAP_RESET_CLOCKS=y -CONFIG_OMAP_MUX_DEBUG=y -CONFIG_ARCH_OMAP2=y -CONFIG_ARCH_OMAP3=y -CONFIG_ARCH_OMAP4=y -CONFIG_SOC_OMAP5=y -CONFIG_SOC_AM33XX=y -CONFIG_SOC_AM43XX=y -CONFIG_SOC_DRA7XX=y -CONFIG_CACHE_L2X0=y -CONFIG_ARM_THUMBEE=y -CONFIG_ARM_ERRATA_411920=y -CONFIG_SMP=y -CONFIG_NR_CPUS=2 -CONFIG_CMA=y -CONFIG_ZBOOT_ROM_TEXT=0x0 -CONFIG_ZBOOT_ROM_BSS=0x0 -CONFIG_ARM_APPENDED_DTB=y -CONFIG_ARM_ATAG_DTB_COMPAT=y -CONFIG_CMDLINE="root=/dev/mmcblk0p2 rootwait console=ttyO2,115200" -CONFIG_KEXEC=y -CONFIG_FPE_NWFPE=y -CONFIG_CPU_IDLE=y -CONFIG_BINFMT_MISC=y -CONFIG_PM_DEBUG=y -CONFIG_NET=y -CONFIG_PACKET=y -CONFIG_UNIX=y -CONFIG_XFRM_USER=y -CONFIG_NET_KEY=y -CONFIG_NET_KEY_MIGRATE=y -CONFIG_INET=y -CONFIG_IP_MULTICAST=y -CONFIG_IP_PNP=y -CONFIG_IP_PNP_DHCP=y -CONFIG_IP_PNP_BOOTP=y -CONFIG_IP_PNP_RARP=y -# CONFIG_INET_LRO is not set -# CONFIG_IPV6 is not set -CONFIG_NETFILTER=y -CONFIG_CAN=m -CONFIG_CAN_C_CAN=m -CONFIG_CAN_C_CAN_PLATFORM=m -CONFIG_BT=m -CONFIG_BT_HCIUART=m -CONFIG_BT_HCIUART_H4=y -CONFIG_BT_HCIUART_BCSP=y -CONFIG_BT_HCIUART_LL=y -CONFIG_BT_HCIBCM203X=m -CONFIG_BT_HCIBPA10X=m -CONFIG_CFG80211=m -CONFIG_MAC80211=m -CONFIG_MAC80211_RC_PID=y -CONFIG_MAC80211_RC_DEFAULT_PID=y -CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" -CONFIG_DEVTMPFS=y -CONFIG_DEVTMPFS_MOUNT=y -CONFIG_DMA_CMA=y -CONFIG_OMAP_OCP2SCP=y -CONFIG_CONNECTOR=y -CONFIG_MTD=y -CONFIG_MTD_CMDLINE_PARTS=y -CONFIG_MTD_BLOCK=y -CONFIG_MTD_OOPS=y -CONFIG_MTD_CFI=y -CONFIG_MTD_CFI_INTELEXT=y -CONFIG_MTD_NAND=y -CONFIG_MTD_NAND_OMAP2=y -CONFIG_MTD_ONENAND=y -CONFIG_MTD_ONENAND_VERIFY_WRITE=y -CONFIG_MTD_ONENAND_OMAP2=y -CONFIG_MTD_UBI=y -CONFIG_BLK_DEV_LOOP=y -CONFIG_BLK_DEV_RAM=y -CONFIG_BLK_DEV_RAM_SIZE=16384 -CONFIG_SENSORS_TSL2550=m -CONFIG_BMP085_I2C=m -CONFIG_SENSORS_LIS3_I2C=m -CONFIG_SCSI=y -CONFIG_BLK_DEV_SD=y -CONFIG_SCSI_MULTI_LUN=y -CONFIG_SCSI_SCAN_ASYNC=y -CONFIG_MD=y -CONFIG_NETDEVICES=y -CONFIG_KS8851=y -CONFIG_KS8851_MLL=y -CONFIG_SMC91X=y -CONFIG_SMSC911X=y -CONFIG_TI_CPSW=y -CONFIG_AT803X_PHY=y -CONFIG_SMSC_PHY=y -CONFIG_USB_USBNET=y -CONFIG_USB_NET_SMSC95XX=y -CONFIG_USB_ALI_M5632=y -CONFIG_USB_AN2720=y -CONFIG_USB_EPSON2888=y -CONFIG_USB_KC2190=y -CONFIG_LIBERTAS=m -CONFIG_LIBERTAS_USB=m -CONFIG_LIBERTAS_SDIO=m -CONFIG_LIBERTAS_DEBUG=y -CONFIG_WL_TI=y -CONFIG_WL12XX=m -CONFIG_WL18XX=m -CONFIG_WLCORE_SPI=m -CONFIG_WLCORE_SDIO=m -CONFIG_MWIFIEX=m -CONFIG_MWIFIEX_SDIO=m -CONFIG_MWIFIEX_USB=m -CONFIG_INPUT_JOYDEV=y -CONFIG_INPUT_EVDEV=y -CONFIG_KEYBOARD_GPIO=y -CONFIG_KEYBOARD_MATRIX=m -CONFIG_KEYBOARD_TWL4030=y -CONFIG_INPUT_TOUCHSCREEN=y -CONFIG_TOUCHSCREEN_ADS7846=y -CONFIG_INPUT_MISC=y -CONFIG_INPUT_TWL4030_PWRBUTTON=y -# CONFIG_LEGACY_PTYS is not set -CONFIG_SERIAL_8250=y -CONFIG_SERIAL_8250_CONSOLE=y -CONFIG_SERIAL_8250_NR_UARTS=32 -CONFIG_SERIAL_8250_EXTENDED=y -CONFIG_SERIAL_8250_MANY_PORTS=y -CONFIG_SERIAL_8250_SHARE_IRQ=y -CONFIG_SERIAL_8250_DETECT_IRQ=y -CONFIG_SERIAL_8250_RSA=y -CONFIG_SERIAL_OF_PLATFORM=y -CONFIG_SERIAL_OMAP=y -CONFIG_SERIAL_OMAP_CONSOLE=y -CONFIG_HW_RANDOM=y -CONFIG_I2C_CHARDEV=y -CONFIG_SPI=y -CONFIG_SPI_OMAP24XX=y -CONFIG_PINCTRL_SINGLE=y -CONFIG_DEBUG_GPIO=y -CONFIG_GPIO_SYSFS=y -CONFIG_GPIO_TWL4030=y -CONFIG_W1=y -CONFIG_POWER_SUPPLY=y -CONFIG_POWER_AVS=y -CONFIG_SENSORS_LM75=m -CONFIG_THERMAL=y -CONFIG_THERMAL_GOV_FAIR_SHARE=y -CONFIG_THERMAL_GOV_USER_SPACE=y -CONFIG_CPU_THERMAL=y -CONFIG_TI_SOC_THERMAL=y -CONFIG_TI_THERMAL=y -CONFIG_OMAP4_THERMAL=y -CONFIG_OMAP5_THERMAL=y -CONFIG_DRA752_THERMAL=y -CONFIG_WATCHDOG=y -CONFIG_OMAP_WATCHDOG=y -CONFIG_TWL4030_WATCHDOG=y -CONFIG_MFD_SYSCON=y -CONFIG_MFD_PALMAS=y -CONFIG_MFD_TPS65217=y -CONFIG_MFD_TPS65910=y -CONFIG_TWL6040_CORE=y -CONFIG_REGULATOR_FIXED_VOLTAGE=y -CONFIG_REGULATOR_PALMAS=y -CONFIG_REGULATOR_TI_ABB=y -CONFIG_REGULATOR_TPS65023=y -CONFIG_REGULATOR_TPS6507X=y -CONFIG_REGULATOR_TPS65217=y -CONFIG_REGULATOR_TPS65910=y -CONFIG_REGULATOR_TWL4030=y -CONFIG_REGULATOR_PBIAS=y -CONFIG_FB=y -CONFIG_FIRMWARE_EDID=y -CONFIG_FB_MODE_HELPERS=y -CONFIG_FB_TILEBLITTING=y -CONFIG_OMAP2_DSS=m -CONFIG_OMAP2_DSS_SDI=y -CONFIG_OMAP2_DSS_DSI=y -CONFIG_FB_OMAP2=m -CONFIG_DISPLAY_ENCODER_TFP410=m -CONFIG_DISPLAY_ENCODER_TPD12S015=m -CONFIG_DISPLAY_CONNECTOR_DVI=m -CONFIG_DISPLAY_CONNECTOR_HDMI=m -CONFIG_DISPLAY_PANEL_DPI=m -CONFIG_BACKLIGHT_LCD_SUPPORT=y -CONFIG_LCD_CLASS_DEVICE=y -CONFIG_LCD_PLATFORM=y -CONFIG_FRAMEBUFFER_CONSOLE=y -CONFIG_FRAMEBUFFER_CONSOLE_ROTATION=y -CONFIG_LOGO=y -CONFIG_SOUND=m -CONFIG_SND=m -CONFIG_SND_MIXER_OSS=m -CONFIG_SND_PCM_OSS=m -CONFIG_SND_VERBOSE_PRINTK=y -CONFIG_SND_DEBUG=y -CONFIG_SND_USB_AUDIO=m -CONFIG_SND_SOC=m -CONFIG_SND_OMAP_SOC=m -CONFIG_SND_AM33XX_SOC_EVM=m -CONFIG_SND_DAVINCI_SOC=m -CONFIG_SND_OMAP_SOC_OMAP_TWL4030=m -CONFIG_SND_OMAP_SOC_OMAP_ABE_TWL6040=m -CONFIG_SND_OMAP_SOC_OMAP3_PANDORA=m -CONFIG_USB=y -CONFIG_USB_ANNOUNCE_NEW_DEVICES=y -CONFIG_USB_MON=y -CONFIG_USB_WDM=y -CONFIG_USB_STORAGE=y -CONFIG_USB_DWC3=m -CONFIG_USB_TEST=y -CONFIG_NOP_USB_XCEIV=y -CONFIG_OMAP_USB2=y -CONFIG_TI_PIPE3=y -CONFIG_AM335X_PHY_USB=y -CONFIG_USB_GADGET=y -CONFIG_USB_GADGET_DEBUG=y -CONFIG_USB_GADGET_DEBUG_FILES=y -CONFIG_USB_GADGET_DEBUG_FS=y -CONFIG_USB_ZERO=m -CONFIG_MMC=y -CONFIG_MMC_UNSAFE_RESUME=y -CONFIG_SDIO_UART=y -CONFIG_MMC_OMAP=y -CONFIG_MMC_OMAP_HS=y -CONFIG_NEW_LEDS=y -CONFIG_LEDS_CLASS=y -CONFIG_LEDS_GPIO=y -CONFIG_LEDS_TRIGGERS=y -CONFIG_LEDS_TRIGGER_TIMER=y -CONFIG_LEDS_TRIGGER_ONESHOT=y -CONFIG_LEDS_TRIGGER_HEARTBEAT=y -CONFIG_LEDS_TRIGGER_BACKLIGHT=y -CONFIG_LEDS_TRIGGER_CPU=y -CONFIG_LEDS_TRIGGER_GPIO=y -CONFIG_LEDS_TRIGGER_DEFAULT_ON=y -CONFIG_RTC_CLASS=y -CONFIG_RTC_DRV_TWL92330=y -CONFIG_RTC_DRV_TWL4030=y -CONFIG_RTC_DRV_OMAP=y -CONFIG_DMADEVICES=y -CONFIG_TI_EDMA=y -CONFIG_DMA_OMAP=y -CONFIG_EXTCON=y -CONFIG_EXTCON_PALMAS=y -CONFIG_EXT2_FS=y -CONFIG_EXT3_FS=y -# CONFIG_EXT3_FS_XATTR is not set -CONFIG_EXT4_FS=y -CONFIG_QUOTA=y -CONFIG_QFMT_V2=y -CONFIG_MSDOS_FS=y -CONFIG_VFAT_FS=y -CONFIG_TMPFS=y -CONFIG_JFFS2_FS=y -CONFIG_JFFS2_SUMMARY=y -CONFIG_JFFS2_FS_XATTR=y -CONFIG_JFFS2_COMPRESSION_OPTIONS=y -CONFIG_JFFS2_LZO=y -CONFIG_JFFS2_RUBIN=y -CONFIG_UBIFS_FS=y -CONFIG_CRAMFS=y -CONFIG_NFS_FS=y -CONFIG_NFS_V3_ACL=y -CONFIG_NFS_V4=y -CONFIG_ROOT_NFS=y -CONFIG_NLS_CODEPAGE_437=y -CONFIG_NLS_ISO8859_1=y -CONFIG_PRINTK_TIME=y -CONFIG_DEBUG_INFO=y -CONFIG_MAGIC_SYSRQ=y -CONFIG_SCHEDSTATS=y -CONFIG_TIMER_STATS=y -CONFIG_PROVE_LOCKING=y -# CONFIG_DEBUG_BUGVERBOSE is not set -CONFIG_SECURITY=y -CONFIG_CRYPTO_MICHAEL_MIC=y -# CONFIG_CRYPTO_ANSI_CPRNG is not set -CONFIG_CRC_CCITT=y -CONFIG_CRC_T10DIF=y -CONFIG_CRC_ITU_T=y -CONFIG_CRC7=y -CONFIG_LIBCRC32C=y -CONFIG_FONTS=y -CONFIG_FONT_8x8=y -CONFIG_FONT_8x16=y diff --git a/distribution/yocto-advanced/poky/meta-mini/recipes-kernel/linux-vanilla/files/imx6qsabrelite/defconfig b/distribution/yocto-advanced/poky/meta-mini/recipes-kernel/linux-vanilla/files/imx6qsabrelite/defconfig deleted file mode 100644 index d4b216a..0000000 --- a/distribution/yocto-advanced/poky/meta-mini/recipes-kernel/linux-vanilla/files/imx6qsabrelite/defconfig +++ /dev/null @@ -1,3721 +0,0 @@ -# -# Automatically generated file; DO NOT EDIT. -# Linux/arm 3.16.1 Kernel Configuration -# -CONFIG_ARM=y -CONFIG_ARM_HAS_SG_CHAIN=y -CONFIG_MIGHT_HAVE_PCI=y -CONFIG_SYS_SUPPORTS_APM_EMULATION=y -CONFIG_HAVE_PROC_CPU=y -CONFIG_STACKTRACE_SUPPORT=y -CONFIG_LOCKDEP_SUPPORT=y -CONFIG_TRACE_IRQFLAGS_SUPPORT=y -CONFIG_RWSEM_XCHGADD_ALGORITHM=y -CONFIG_GENERIC_HWEIGHT=y -CONFIG_GENERIC_CALIBRATE_DELAY=y -CONFIG_NEED_DMA_MAP_STATE=y -CONFIG_ARCH_SUPPORTS_UPROBES=y -CONFIG_FIQ=y -CONFIG_VECTORS_BASE=0xffff0000 -CONFIG_ARM_PATCH_PHYS_VIRT=y -CONFIG_GENERIC_BUG=y -CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" -CONFIG_IRQ_WORK=y -CONFIG_BUILDTIME_EXTABLE_SORT=y - -# -# General setup -# -CONFIG_INIT_ENV_ARG_LIMIT=32 -CONFIG_CROSS_COMPILE="" -# CONFIG_COMPILE_TEST is not set -CONFIG_LOCALVERSION="" -CONFIG_LOCALVERSION_AUTO=y -CONFIG_HAVE_KERNEL_GZIP=y -CONFIG_HAVE_KERNEL_LZMA=y -CONFIG_HAVE_KERNEL_XZ=y -CONFIG_HAVE_KERNEL_LZO=y -CONFIG_HAVE_KERNEL_LZ4=y -# CONFIG_KERNEL_GZIP is not set -# CONFIG_KERNEL_LZMA is not set -# CONFIG_KERNEL_XZ is not set -CONFIG_KERNEL_LZO=y -# CONFIG_KERNEL_LZ4 is not set -CONFIG_DEFAULT_HOSTNAME="(none)" -CONFIG_SWAP=y -CONFIG_SYSVIPC=y -CONFIG_SYSVIPC_SYSCTL=y -# CONFIG_POSIX_MQUEUE is not set -CONFIG_CROSS_MEMORY_ATTACH=y -# CONFIG_FHANDLE is not set -CONFIG_USELIB=y -# CONFIG_AUDIT is not set -CONFIG_HAVE_ARCH_AUDITSYSCALL=y - -# -# IRQ subsystem -# -CONFIG_GENERIC_IRQ_PROBE=y -CONFIG_GENERIC_IRQ_SHOW=y -CONFIG_HARDIRQS_SW_RESEND=y -CONFIG_GENERIC_IRQ_CHIP=y -CONFIG_IRQ_DOMAIN=y -# CONFIG_IRQ_DOMAIN_DEBUG is not set -CONFIG_IRQ_FORCED_THREADING=y -CONFIG_SPARSE_IRQ=y -CONFIG_KTIME_SCALAR=y -CONFIG_GENERIC_CLOCKEVENTS=y -CONFIG_GENERIC_CLOCKEVENTS_BUILD=y -CONFIG_ARCH_HAS_TICK_BROADCAST=y -CONFIG_GENERIC_CLOCKEVENTS_BROADCAST=y - -# -# Timers subsystem -# -CONFIG_TICK_ONESHOT=y -CONFIG_NO_HZ_COMMON=y -# CONFIG_HZ_PERIODIC is not set -CONFIG_NO_HZ_IDLE=y -# CONFIG_NO_HZ_FULL is not set -CONFIG_NO_HZ=y -CONFIG_HIGH_RES_TIMERS=y - -# -# CPU/Task time and stats accounting -# -CONFIG_TICK_CPU_ACCOUNTING=y -# CONFIG_VIRT_CPU_ACCOUNTING_GEN is not set -# CONFIG_IRQ_TIME_ACCOUNTING is not set -# CONFIG_BSD_PROCESS_ACCT is not set -# CONFIG_TASKSTATS is not set - -# -# RCU Subsystem -# -CONFIG_TREE_RCU=y -# CONFIG_PREEMPT_RCU is not set -CONFIG_RCU_STALL_COMMON=y -# CONFIG_RCU_USER_QS is not set -CONFIG_RCU_FANOUT=32 -CONFIG_RCU_FANOUT_LEAF=16 -# CONFIG_RCU_FANOUT_EXACT is not set -# CONFIG_RCU_FAST_NO_HZ is not set -# CONFIG_TREE_RCU_TRACE is not set -# CONFIG_RCU_NOCB_CPU is not set -# CONFIG_IKCONFIG is not set -CONFIG_LOG_BUF_SHIFT=18 -CONFIG_GENERIC_SCHED_CLOCK=y -CONFIG_CGROUPS=y -# CONFIG_CGROUP_DEBUG is not set -# CONFIG_CGROUP_FREEZER is not set -# CONFIG_CGROUP_DEVICE is not set -# CONFIG_CPUSETS is not set -# CONFIG_CGROUP_CPUACCT is not set -# CONFIG_RESOURCE_COUNTERS is not set -# CONFIG_CGROUP_PERF is not set -# CONFIG_CGROUP_SCHED is not set -# CONFIG_BLK_CGROUP is not set -# CONFIG_CHECKPOINT_RESTORE is not set -# CONFIG_NAMESPACES is not set -# CONFIG_SCHED_AUTOGROUP is not set -# CONFIG_SYSFS_DEPRECATED is not set -CONFIG_RELAY=y -CONFIG_BLK_DEV_INITRD=y -CONFIG_INITRAMFS_SOURCE="" -CONFIG_RD_GZIP=y -# CONFIG_RD_BZIP2 is not set -# CONFIG_RD_LZMA is not set -# CONFIG_RD_XZ is not set -# CONFIG_RD_LZO is not set -# CONFIG_RD_LZ4 is not set -# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set -CONFIG_SYSCTL=y -CONFIG_ANON_INODES=y -CONFIG_HAVE_UID16=y -CONFIG_EXPERT=y -CONFIG_UID16=y -# CONFIG_SGETMASK_SYSCALL is not set -CONFIG_SYSFS_SYSCALL=y -# CONFIG_SYSCTL_SYSCALL is not set -CONFIG_KALLSYMS=y -CONFIG_KALLSYMS_ALL=y -CONFIG_PRINTK=y -CONFIG_BUG=y -CONFIG_ELF_CORE=y -CONFIG_BASE_FULL=y -CONFIG_FUTEX=y -CONFIG_EPOLL=y -CONFIG_SIGNALFD=y -CONFIG_TIMERFD=y -CONFIG_EVENTFD=y -CONFIG_SHMEM=y -CONFIG_AIO=y -CONFIG_PCI_QUIRKS=y -# CONFIG_EMBEDDED is not set -CONFIG_HAVE_PERF_EVENTS=y -CONFIG_PERF_USE_VMALLOC=y - -# -# Kernel Performance Events And Counters -# -CONFIG_PERF_EVENTS=y -# CONFIG_DEBUG_PERF_USE_VMALLOC is not set -CONFIG_VM_EVENT_COUNTERS=y -# CONFIG_SLUB_DEBUG is not set -# CONFIG_COMPAT_BRK is not set -# CONFIG_SLAB is not set -CONFIG_SLUB=y -# CONFIG_SLOB is not set -CONFIG_SLUB_CPU_PARTIAL=y -# CONFIG_SYSTEM_TRUSTED_KEYRING is not set -# CONFIG_PROFILING is not set -CONFIG_HAVE_OPROFILE=y -# CONFIG_KPROBES is not set -# CONFIG_JUMP_LABEL is not set -# CONFIG_UPROBES is not set -# CONFIG_HAVE_64BIT_ALIGNED_ACCESS is not set -CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y -CONFIG_ARCH_USE_BUILTIN_BSWAP=y -CONFIG_HAVE_KPROBES=y -CONFIG_HAVE_KRETPROBES=y -CONFIG_HAVE_ARCH_TRACEHOOK=y -CONFIG_HAVE_DMA_ATTRS=y -CONFIG_HAVE_DMA_CONTIGUOUS=y -CONFIG_GENERIC_SMP_IDLE_THREAD=y -CONFIG_GENERIC_IDLE_POLL_SETUP=y -CONFIG_HAVE_REGS_AND_STACK_ACCESS_API=y -CONFIG_HAVE_CLK=y -CONFIG_HAVE_DMA_API_DEBUG=y -CONFIG_HAVE_HW_BREAKPOINT=y -CONFIG_HAVE_PERF_REGS=y -CONFIG_HAVE_PERF_USER_STACK_DUMP=y -CONFIG_HAVE_ARCH_JUMP_LABEL=y -CONFIG_ARCH_WANT_IPC_PARSE_VERSION=y -CONFIG_HAVE_ARCH_SECCOMP_FILTER=y -CONFIG_HAVE_CC_STACKPROTECTOR=y -# CONFIG_CC_STACKPROTECTOR is not set -CONFIG_CC_STACKPROTECTOR_NONE=y -# CONFIG_CC_STACKPROTECTOR_REGULAR is not set -# CONFIG_CC_STACKPROTECTOR_STRONG is not set -CONFIG_HAVE_CONTEXT_TRACKING=y -CONFIG_HAVE_VIRT_CPU_ACCOUNTING_GEN=y -CONFIG_HAVE_IRQ_TIME_ACCOUNTING=y -CONFIG_MODULES_USE_ELF_REL=y -CONFIG_CLONE_BACKWARDS=y -CONFIG_OLD_SIGSUSPEND3=y -CONFIG_OLD_SIGACTION=y - -# -# GCOV-based kernel profiling -# -# CONFIG_GCOV_KERNEL is not set -CONFIG_HAVE_GENERIC_DMA_COHERENT=y -CONFIG_RT_MUTEXES=y -CONFIG_BASE_SMALL=0 -CONFIG_MODULES=y -# CONFIG_MODULE_FORCE_LOAD is not set -CONFIG_MODULE_UNLOAD=y -# CONFIG_MODULE_FORCE_UNLOAD is not set -CONFIG_MODVERSIONS=y -CONFIG_MODULE_SRCVERSION_ALL=y -# CONFIG_MODULE_SIG is not set -CONFIG_STOP_MACHINE=y -CONFIG_BLOCK=y -CONFIG_LBDAF=y -# CONFIG_BLK_DEV_BSG is not set -# CONFIG_BLK_DEV_BSGLIB is not set -# CONFIG_BLK_DEV_INTEGRITY is not set -# CONFIG_BLK_CMDLINE_PARSER is not set - -# -# Partition Types -# -# CONFIG_PARTITION_ADVANCED is not set -CONFIG_MSDOS_PARTITION=y -CONFIG_EFI_PARTITION=y - -# -# IO Schedulers -# -CONFIG_IOSCHED_NOOP=y -CONFIG_IOSCHED_DEADLINE=y -CONFIG_IOSCHED_CFQ=y -# CONFIG_DEFAULT_DEADLINE is not set -CONFIG_DEFAULT_CFQ=y -# CONFIG_DEFAULT_NOOP is not set -CONFIG_DEFAULT_IOSCHED="cfq" -CONFIG_UNINLINE_SPIN_UNLOCK=y -CONFIG_ARCH_SUPPORTS_ATOMIC_RMW=y -CONFIG_RWSEM_SPIN_ON_OWNER=y -CONFIG_FREEZER=y - -# -# System Type -# -CONFIG_MMU=y -CONFIG_ARCH_MULTIPLATFORM=y -# CONFIG_ARCH_INTEGRATOR is not set -# CONFIG_ARCH_REALVIEW is not set -# CONFIG_ARCH_VERSATILE is not set -# CONFIG_ARCH_AT91 is not set -# CONFIG_ARCH_CLPS711X is not set -# CONFIG_ARCH_GEMINI is not set -# CONFIG_ARCH_EBSA110 is not set -# CONFIG_ARCH_EP93XX is not set -# CONFIG_ARCH_FOOTBRIDGE is not set -# CONFIG_ARCH_NETX is not set -# CONFIG_ARCH_IOP13XX is not set -# CONFIG_ARCH_IOP32X is not set -# CONFIG_ARCH_IOP33X is not set -# CONFIG_ARCH_IXP4XX is not set -# CONFIG_ARCH_DOVE is not set -# CONFIG_ARCH_KIRKWOOD is not set -# CONFIG_ARCH_MV78XX0 is not set -# CONFIG_ARCH_ORION5X is not set -# CONFIG_ARCH_MMP is not set -# CONFIG_ARCH_KS8695 is not set -# CONFIG_ARCH_W90X900 is not set -# CONFIG_ARCH_LPC32XX is not set -# CONFIG_ARCH_PXA is not set -# CONFIG_ARCH_MSM is not set -# CONFIG_ARCH_SHMOBILE_LEGACY is not set -# CONFIG_ARCH_RPC is not set -# CONFIG_ARCH_SA1100 is not set -# CONFIG_ARCH_S3C24XX is not set -# CONFIG_ARCH_S3C64XX is not set -# CONFIG_ARCH_S5P64X0 is not set -# CONFIG_ARCH_S5PC100 is not set -# CONFIG_ARCH_S5PV210 is not set -# CONFIG_ARCH_DAVINCI is not set -# CONFIG_ARCH_OMAP1 is not set - -# -# Multiple platform selection -# - -# -# CPU Core family selection -# -CONFIG_ARCH_MULTI_V6=y -CONFIG_ARCH_MULTI_V7=y -CONFIG_ARCH_MULTI_V6_V7=y -# CONFIG_ARCH_MULTI_CPU_AUTO is not set -# CONFIG_ARCH_VIRT is not set -# CONFIG_ARCH_MVEBU is not set -# CONFIG_ARCH_BCM is not set -# CONFIG_ARCH_BERLIN is not set -# CONFIG_ARCH_CNS3XXX is not set -# CONFIG_ARCH_HIGHBANK is not set -# CONFIG_ARCH_HI3xxx is not set -# CONFIG_ARCH_KEYSTONE is not set -CONFIG_ARCH_MXC=y -CONFIG_MXC_TZIC=y -CONFIG_MXC_AVIC=y -CONFIG_MXC_DEBUG_BOARD=y -CONFIG_HAVE_EPIT=y -# CONFIG_MXC_USE_EPIT is not set -CONFIG_ARCH_HAS_RNGA=y -CONFIG_HAVE_IMX_ANATOP=y -CONFIG_HAVE_IMX_GPC=y -CONFIG_HAVE_IMX_MMDC=y -CONFIG_HAVE_IMX_SRC=y -CONFIG_ARCH_MXC_IOMUX_V3=y -CONFIG_SOC_IMX31=y -CONFIG_SOC_IMX35=y -CONFIG_SOC_IMX5=y -CONFIG_SOC_IMX51=y - -# -# MX31 platforms: -# -CONFIG_MACH_MX31ADS=y -CONFIG_MACH_MX31LILLY=y -CONFIG_MACH_MX31LITE=y -CONFIG_MACH_PCM037=y -CONFIG_MACH_PCM037_EET=y -CONFIG_MACH_MX31_3DS=y -# CONFIG_MACH_MX31_3DS_MXC_NAND_USE_BBT is not set -CONFIG_MACH_MX31MOBOARD=y -CONFIG_MACH_QONG=y -CONFIG_MACH_ARMADILLO5X0=y -CONFIG_MACH_KZM_ARM11_01=y -CONFIG_MACH_BUG=y -CONFIG_MACH_IMX31_DT=y - -# -# MX35 platforms: -# -CONFIG_MACH_IMX35_DT=y -CONFIG_MACH_PCM043=y -CONFIG_MACH_MX35_3DS=y -# CONFIG_MACH_EUKREA_CPUIMX35SD is not set -CONFIG_MACH_VPR200=y - -# -# Device tree only -# -CONFIG_SOC_IMX50=y -CONFIG_MACH_IMX51_DT=y -CONFIG_SOC_IMX53=y -CONFIG_SOC_IMX6=y -CONFIG_SOC_IMX6Q=y -CONFIG_SOC_IMX6SL=y -# CONFIG_SOC_IMX6SX is not set -CONFIG_SOC_VF610=y -CONFIG_IMX_HAVE_PLATFORM_FEC=y -CONFIG_IMX_HAVE_PLATFORM_FLEXCAN=y -CONFIG_IMX_HAVE_PLATFORM_FSL_USB2_UDC=y -CONFIG_IMX_HAVE_PLATFORM_GPIO_KEYS=y -CONFIG_IMX_HAVE_PLATFORM_IMX2_WDT=y -CONFIG_IMX_HAVE_PLATFORM_IMX_FB=y -CONFIG_IMX_HAVE_PLATFORM_IMX_I2C=y -CONFIG_IMX_HAVE_PLATFORM_IMX_KEYPAD=y -CONFIG_IMX_HAVE_PLATFORM_IMX_SSI=y -CONFIG_IMX_HAVE_PLATFORM_IMX_UART=y -CONFIG_IMX_HAVE_PLATFORM_IPU_CORE=y -CONFIG_IMX_HAVE_PLATFORM_MXC_EHCI=y -CONFIG_IMX_HAVE_PLATFORM_MXC_MMC=y -CONFIG_IMX_HAVE_PLATFORM_MXC_NAND=y -CONFIG_IMX_HAVE_PLATFORM_MXC_RNGA=y -CONFIG_IMX_HAVE_PLATFORM_MXC_RTC=y -CONFIG_IMX_HAVE_PLATFORM_MXC_W1=y -CONFIG_IMX_HAVE_PLATFORM_SDHCI_ESDHC_IMX=y -CONFIG_IMX_HAVE_PLATFORM_SPI_IMX=y - -# -# TI OMAP/AM/DM/DRA Family -# -# CONFIG_ARCH_OMAP2 is not set -# CONFIG_ARCH_OMAP3 is not set -# CONFIG_ARCH_OMAP4 is not set -# CONFIG_SOC_OMAP5 is not set -# CONFIG_SOC_AM33XX is not set -# CONFIG_SOC_AM43XX is not set -# CONFIG_SOC_DRA7XX is not set -# CONFIG_ARCH_PICOXCELL is not set -# CONFIG_ARCH_QCOM is not set -# CONFIG_ARCH_ROCKCHIP is not set -# CONFIG_ARCH_SOCFPGA is not set -# CONFIG_PLAT_SPEAR is not set -# CONFIG_ARCH_STI is not set -# CONFIG_ARCH_EXYNOS is not set -# CONFIG_ARCH_SHMOBILE_MULTI is not set -# CONFIG_ARCH_SUNXI is not set -# CONFIG_ARCH_SIRF is not set -# CONFIG_ARCH_TEGRA is not set -# CONFIG_ARCH_U8500 is not set -# CONFIG_ARCH_VEXPRESS is not set -# CONFIG_ARCH_WM8750 is not set -# CONFIG_ARCH_WM8850 is not set -# CONFIG_ARCH_ZYNQ is not set - -# -# Processor Type -# -CONFIG_CPU_V6=y -CONFIG_CPU_V6K=y -CONFIG_CPU_V7=y -CONFIG_CPU_32v6=y -CONFIG_CPU_32v6K=y -CONFIG_CPU_32v7=y -CONFIG_CPU_ABRT_EV6=y -CONFIG_CPU_ABRT_EV7=y -CONFIG_CPU_PABRT_V6=y -CONFIG_CPU_PABRT_V7=y -CONFIG_CPU_CACHE_V6=y -CONFIG_CPU_CACHE_V7=y -CONFIG_CPU_CACHE_VIPT=y -CONFIG_CPU_COPY_V6=y -CONFIG_CPU_TLB_V6=y -CONFIG_CPU_TLB_V7=y -CONFIG_CPU_HAS_ASID=y -CONFIG_CPU_CP15=y -CONFIG_CPU_CP15_MMU=y - -# -# Processor Features -# -# CONFIG_ARCH_PHYS_ADDR_T_64BIT is not set -CONFIG_ARM_THUMB=y -# CONFIG_ARM_THUMBEE is not set -CONFIG_ARM_VIRT_EXT=y -CONFIG_SWP_EMULATE=y -# CONFIG_CPU_ICACHE_DISABLE is not set -# CONFIG_CPU_DCACHE_DISABLE is not set -# CONFIG_CPU_BPREDICT_DISABLE is not set -CONFIG_KUSER_HELPERS=y -CONFIG_DMA_CACHE_RWFO=y -CONFIG_OUTER_CACHE=y -CONFIG_OUTER_CACHE_SYNC=y -CONFIG_MIGHT_HAVE_CACHE_L2X0=y -CONFIG_CACHE_L2X0=y -CONFIG_PL310_ERRATA_588369=y -CONFIG_PL310_ERRATA_727915=y -# CONFIG_PL310_ERRATA_753970 is not set -CONFIG_PL310_ERRATA_769419=y -CONFIG_ARM_L1_CACHE_SHIFT_6=y -CONFIG_ARM_L1_CACHE_SHIFT=6 -CONFIG_ARM_DMA_MEM_BUFFERABLE=y -CONFIG_MULTI_IRQ_HANDLER=y -# CONFIG_ARM_ERRATA_326103 is not set -# CONFIG_ARM_ERRATA_411920 is not set -# CONFIG_ARM_ERRATA_430973 is not set -# CONFIG_ARM_ERRATA_643719 is not set -# CONFIG_ARM_ERRATA_720789 is not set -CONFIG_ARM_ERRATA_754322=y -# CONFIG_ARM_ERRATA_754327 is not set -# CONFIG_ARM_ERRATA_364296 is not set -CONFIG_ARM_ERRATA_764369=y -CONFIG_ARM_ERRATA_775420=y -# CONFIG_ARM_ERRATA_798181 is not set -# CONFIG_ARM_ERRATA_773022 is not set - -# -# Bus support -# -CONFIG_PCI=y -CONFIG_PCI_DOMAINS=y -CONFIG_PCI_SYSCALL=y -# CONFIG_PCI_MSI is not set -# CONFIG_PCI_DEBUG is not set -# CONFIG_PCI_REALLOC_ENABLE_AUTO is not set -# CONFIG_PCI_STUB is not set -# CONFIG_PCI_IOV is not set -# CONFIG_PCI_PRI is not set -# CONFIG_PCI_PASID is not set - -# -# PCI host controller drivers -# -CONFIG_PCIE_DW=y -CONFIG_PCI_IMX6=y -# CONFIG_PCI_HOST_GENERIC is not set -CONFIG_PCIEPORTBUS=y -CONFIG_PCIEAER=y -# CONFIG_PCIE_ECRC is not set -# CONFIG_PCIEAER_INJECT is not set -CONFIG_PCIEASPM=y -# CONFIG_PCIEASPM_DEBUG is not set -CONFIG_PCIEASPM_DEFAULT=y -# CONFIG_PCIEASPM_POWERSAVE is not set -# CONFIG_PCIEASPM_PERFORMANCE is not set -CONFIG_PCIE_PME=y -# CONFIG_PCCARD is not set - -# -# Kernel Features -# -CONFIG_HAVE_SMP=y -CONFIG_SMP=y -CONFIG_SMP_ON_UP=y -CONFIG_ARM_CPU_TOPOLOGY=y -# CONFIG_SCHED_MC is not set -# CONFIG_SCHED_SMT is not set -CONFIG_HAVE_ARM_SCU=y -# CONFIG_HAVE_ARM_ARCH_TIMER is not set -CONFIG_HAVE_ARM_TWD=y -# CONFIG_MCPM is not set -# CONFIG_BIG_LITTLE is not set -# CONFIG_VMSPLIT_3G is not set -CONFIG_VMSPLIT_2G=y -# CONFIG_VMSPLIT_1G is not set -CONFIG_PAGE_OFFSET=0x80000000 -CONFIG_NR_CPUS=4 -CONFIG_HOTPLUG_CPU=y -# CONFIG_ARM_PSCI is not set -CONFIG_ARCH_NR_GPIO=0 -# CONFIG_PREEMPT_NONE is not set -CONFIG_PREEMPT_VOLUNTARY=y -# CONFIG_PREEMPT is not set -CONFIG_HZ_FIXED=0 -CONFIG_HZ_100=y -# CONFIG_HZ_200 is not set -# CONFIG_HZ_250 is not set -# CONFIG_HZ_300 is not set -# CONFIG_HZ_500 is not set -# CONFIG_HZ_1000 is not set -CONFIG_HZ=100 -CONFIG_SCHED_HRTICK=y -CONFIG_AEABI=y -# CONFIG_OABI_COMPAT is not set -# CONFIG_ARCH_SPARSEMEM_DEFAULT is not set -# CONFIG_ARCH_SELECT_MEMORY_MODEL is not set -CONFIG_HAVE_ARCH_PFN_VALID=y -CONFIG_HIGHMEM=y -# CONFIG_HIGHPTE is not set -CONFIG_HW_PERF_EVENTS=y -CONFIG_ARCH_WANT_GENERAL_HUGETLB=y -CONFIG_FLATMEM=y -CONFIG_FLAT_NODE_MEM_MAP=y -CONFIG_HAVE_MEMBLOCK=y -CONFIG_NO_BOOTMEM=y -CONFIG_MEMORY_ISOLATION=y -# CONFIG_HAVE_BOOTMEM_INFO_NODE is not set -CONFIG_PAGEFLAGS_EXTENDED=y -CONFIG_SPLIT_PTLOCK_CPUS=4 -CONFIG_COMPACTION=y -CONFIG_MIGRATION=y -# CONFIG_PHYS_ADDR_T_64BIT is not set -CONFIG_ZONE_DMA_FLAG=0 -CONFIG_BOUNCE=y -# CONFIG_KSM is not set -CONFIG_DEFAULT_MMAP_MIN_ADDR=4096 -# CONFIG_CLEANCACHE is not set -# CONFIG_FRONTSWAP is not set -CONFIG_CMA=y -# CONFIG_CMA_DEBUG is not set -# CONFIG_ZBUD is not set -# CONFIG_ZSMALLOC is not set -CONFIG_FORCE_MAX_ZONEORDER=11 -CONFIG_ALIGNMENT_TRAP=y -# CONFIG_UACCESS_WITH_MEMCPY is not set -# CONFIG_SECCOMP is not set -CONFIG_SWIOTLB=y -CONFIG_IOMMU_HELPER=y - -# -# Boot options -# -CONFIG_USE_OF=y -CONFIG_ATAGS=y -# CONFIG_DEPRECATED_PARAM_STRUCT is not set -CONFIG_ZBOOT_ROM_TEXT=0 -CONFIG_ZBOOT_ROM_BSS=0 -# CONFIG_ARM_APPENDED_DTB is not set -CONFIG_CMDLINE="noinitrd console=ttymxc1,115200 init=/usr/bin/hello root=/dev/m" -# CONFIG_CMDLINE_FROM_BOOTLOADER is not set -# CONFIG_CMDLINE_EXTEND is not set -CONFIG_CMDLINE_FORCE=y -# CONFIG_KEXEC is not set -# CONFIG_CRASH_DUMP is not set -CONFIG_AUTO_ZRELADDR=y - -# -# CPU Power Management -# - -# -# CPU Frequency scaling -# -CONFIG_CPU_FREQ=y -CONFIG_CPU_FREQ_GOV_COMMON=y -CONFIG_CPU_FREQ_STAT=y -# CONFIG_CPU_FREQ_STAT_DETAILS is not set -# CONFIG_CPU_FREQ_DEFAULT_GOV_PERFORMANCE is not set -# CONFIG_CPU_FREQ_DEFAULT_GOV_POWERSAVE is not set -# CONFIG_CPU_FREQ_DEFAULT_GOV_USERSPACE is not set -CONFIG_CPU_FREQ_DEFAULT_GOV_ONDEMAND=y -# CONFIG_CPU_FREQ_DEFAULT_GOV_CONSERVATIVE is not set -CONFIG_CPU_FREQ_GOV_PERFORMANCE=y -# CONFIG_CPU_FREQ_GOV_POWERSAVE is not set -# CONFIG_CPU_FREQ_GOV_USERSPACE is not set -CONFIG_CPU_FREQ_GOV_ONDEMAND=y -# CONFIG_CPU_FREQ_GOV_CONSERVATIVE is not set -# CONFIG_GENERIC_CPUFREQ_CPU0 is not set - -# -# ARM CPU frequency scaling drivers -# -CONFIG_ARM_IMX6Q_CPUFREQ=y -# CONFIG_ARM_KIRKWOOD_CPUFREQ is not set - -# -# CPU Idle -# -# CONFIG_CPU_IDLE is not set -# CONFIG_ARCH_NEEDS_CPU_IDLE_COUPLED is not set - -# -# Floating point emulation -# - -# -# At least one emulation must be selected -# -CONFIG_VFP=y -CONFIG_VFPv3=y -CONFIG_NEON=y -# CONFIG_KERNEL_MODE_NEON is not set - -# -# Userspace binary formats -# -CONFIG_BINFMT_ELF=y -CONFIG_ARCH_BINFMT_ELF_RANDOMIZE_PIE=y -CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS=y -CONFIG_BINFMT_SCRIPT=y -# CONFIG_HAVE_AOUT is not set -CONFIG_BINFMT_MISC=m -CONFIG_COREDUMP=y - -# -# Power management options -# -CONFIG_SUSPEND=y -CONFIG_SUSPEND_FREEZER=y -# CONFIG_HIBERNATION is not set -CONFIG_PM_SLEEP=y -CONFIG_PM_SLEEP_SMP=y -# CONFIG_PM_AUTOSLEEP is not set -# CONFIG_PM_WAKELOCKS is not set -CONFIG_PM_RUNTIME=y -CONFIG_PM=y -CONFIG_PM_DEBUG=y -# CONFIG_PM_ADVANCED_DEBUG is not set -CONFIG_PM_TEST_SUSPEND=y -CONFIG_PM_SLEEP_DEBUG=y -# CONFIG_APM_EMULATION is not set -CONFIG_ARCH_HAS_OPP=y -CONFIG_PM_OPP=y -CONFIG_PM_CLK=y -# CONFIG_WQ_POWER_EFFICIENT_DEFAULT is not set -CONFIG_CPU_PM=y -CONFIG_ARCH_SUSPEND_POSSIBLE=y -CONFIG_ARM_CPU_SUSPEND=y -CONFIG_ARCH_HIBERNATION_POSSIBLE=y -CONFIG_NET=y - -# -# Networking options -# -CONFIG_PACKET=y -# CONFIG_PACKET_DIAG is not set -CONFIG_UNIX=y -# CONFIG_UNIX_DIAG is not set -CONFIG_XFRM=y -# CONFIG_XFRM_USER is not set -# CONFIG_XFRM_SUB_POLICY is not set -# CONFIG_XFRM_MIGRATE is not set -# CONFIG_XFRM_STATISTICS is not set -# CONFIG_NET_KEY is not set -CONFIG_INET=y -# CONFIG_IP_MULTICAST is not set -# CONFIG_IP_ADVANCED_ROUTER is not set -CONFIG_IP_PNP=y -CONFIG_IP_PNP_DHCP=y -# CONFIG_IP_PNP_BOOTP is not set -# CONFIG_IP_PNP_RARP is not set -# CONFIG_NET_IPIP is not set -# CONFIG_NET_IPGRE_DEMUX is not set -CONFIG_NET_IP_TUNNEL=y -# CONFIG_SYN_COOKIES is not set -# CONFIG_INET_AH is not set -# CONFIG_INET_ESP is not set -# CONFIG_INET_IPCOMP is not set -# CONFIG_INET_XFRM_TUNNEL is not set -CONFIG_INET_TUNNEL=y -# CONFIG_INET_XFRM_MODE_TRANSPORT is not set -# CONFIG_INET_XFRM_MODE_TUNNEL is not set -# CONFIG_INET_XFRM_MODE_BEET is not set -# CONFIG_INET_LRO is not set -CONFIG_INET_DIAG=y -CONFIG_INET_TCP_DIAG=y -# CONFIG_INET_UDP_DIAG is not set -# CONFIG_TCP_CONG_ADVANCED is not set -CONFIG_TCP_CONG_CUBIC=y -CONFIG_DEFAULT_TCP_CONG="cubic" -# CONFIG_TCP_MD5SIG is not set -CONFIG_IPV6=y -# CONFIG_IPV6_ROUTER_PREF is not set -# CONFIG_IPV6_OPTIMISTIC_DAD is not set -# CONFIG_INET6_AH is not set -# CONFIG_INET6_ESP is not set -# CONFIG_INET6_IPCOMP is not set -# CONFIG_IPV6_MIP6 is not set -# CONFIG_INET6_XFRM_TUNNEL is not set -# CONFIG_INET6_TUNNEL is not set -CONFIG_INET6_XFRM_MODE_TRANSPORT=y -CONFIG_INET6_XFRM_MODE_TUNNEL=y -CONFIG_INET6_XFRM_MODE_BEET=y -# CONFIG_INET6_XFRM_MODE_ROUTEOPTIMIZATION is not set -# CONFIG_IPV6_VTI is not set -CONFIG_IPV6_SIT=y -# CONFIG_IPV6_SIT_6RD is not set -CONFIG_IPV6_NDISC_NODETYPE=y -# CONFIG_IPV6_TUNNEL is not set -# CONFIG_IPV6_GRE is not set -# CONFIG_IPV6_MULTIPLE_TABLES is not set -# CONFIG_IPV6_MROUTE is not set -# CONFIG_NETWORK_SECMARK is not set -CONFIG_NET_PTP_CLASSIFY=y -# CONFIG_NETWORK_PHY_TIMESTAMPING is not set -CONFIG_NETFILTER=y -# CONFIG_NETFILTER_DEBUG is not set -CONFIG_NETFILTER_ADVANCED=y - -# -# Core Netfilter Configuration -# -# CONFIG_NETFILTER_NETLINK_ACCT is not set -# CONFIG_NETFILTER_NETLINK_QUEUE is not set -# CONFIG_NETFILTER_NETLINK_LOG is not set -# CONFIG_NF_CONNTRACK is not set -# CONFIG_NF_TABLES is not set -# CONFIG_NETFILTER_XTABLES is not set -# CONFIG_IP_SET is not set -# CONFIG_IP_VS is not set - -# -# IP: Netfilter Configuration -# -# CONFIG_NF_DEFRAG_IPV4 is not set -# CONFIG_IP_NF_IPTABLES is not set -# CONFIG_IP_NF_ARPTABLES is not set - -# -# IPv6: Netfilter Configuration -# -# CONFIG_NF_DEFRAG_IPV6 is not set -# CONFIG_IP6_NF_IPTABLES is not set -# CONFIG_IP_DCCP is not set -# CONFIG_IP_SCTP is not set -# CONFIG_RDS is not set -# CONFIG_TIPC is not set -# CONFIG_ATM is not set -# CONFIG_L2TP is not set -# CONFIG_BRIDGE is not set -CONFIG_HAVE_NET_DSA=y -# CONFIG_VLAN_8021Q is not set -# CONFIG_DECNET is not set -# CONFIG_LLC2 is not set -# CONFIG_IPX is not set -# CONFIG_ATALK is not set -# CONFIG_X25 is not set -# CONFIG_LAPB is not set -# CONFIG_PHONET is not set -# CONFIG_IEEE802154 is not set -# CONFIG_NET_SCHED is not set -# CONFIG_DCB is not set -CONFIG_DNS_RESOLVER=y -# CONFIG_BATMAN_ADV is not set -# CONFIG_OPENVSWITCH is not set -# CONFIG_VSOCKETS is not set -# CONFIG_NETLINK_MMAP is not set -# CONFIG_NETLINK_DIAG is not set -# CONFIG_NET_MPLS_GSO is not set -# CONFIG_HSR is not set -CONFIG_RPS=y -CONFIG_RFS_ACCEL=y -CONFIG_XPS=y -# CONFIG_CGROUP_NET_PRIO is not set -# CONFIG_CGROUP_NET_CLASSID is not set -CONFIG_NET_RX_BUSY_POLL=y -CONFIG_BQL=y -# CONFIG_BPF_JIT is not set -CONFIG_NET_FLOW_LIMIT=y - -# -# Network testing -# -# CONFIG_NET_PKTGEN is not set -# CONFIG_HAMRADIO is not set -# CONFIG_CAN is not set -# CONFIG_IRDA is not set -# CONFIG_BT is not set -# CONFIG_AF_RXRPC is not set -CONFIG_WIRELESS=y -CONFIG_CFG80211=y -# CONFIG_NL80211_TESTMODE is not set -# CONFIG_CFG80211_DEVELOPER_WARNINGS is not set -# CONFIG_CFG80211_REG_DEBUG is not set -# CONFIG_CFG80211_CERTIFICATION_ONUS is not set -CONFIG_CFG80211_DEFAULT_PS=y -# CONFIG_CFG80211_DEBUGFS is not set -# CONFIG_CFG80211_INTERNAL_REGDB is not set -# CONFIG_CFG80211_WEXT is not set -# CONFIG_LIB80211 is not set -CONFIG_MAC80211=y -CONFIG_MAC80211_HAS_RC=y -# CONFIG_MAC80211_RC_PID is not set -CONFIG_MAC80211_RC_MINSTREL=y -CONFIG_MAC80211_RC_MINSTREL_HT=y -CONFIG_MAC80211_RC_DEFAULT_MINSTREL=y -CONFIG_MAC80211_RC_DEFAULT="minstrel_ht" -# CONFIG_MAC80211_MESH is not set -# CONFIG_MAC80211_LEDS is not set -# CONFIG_MAC80211_DEBUGFS is not set -# CONFIG_MAC80211_MESSAGE_TRACING is not set -# CONFIG_MAC80211_DEBUG_MENU is not set -# CONFIG_WIMAX is not set -CONFIG_RFKILL=y -CONFIG_RFKILL_LEDS=y -CONFIG_RFKILL_INPUT=y -# CONFIG_RFKILL_REGULATOR is not set -# CONFIG_RFKILL_GPIO is not set -# CONFIG_NET_9P is not set -# CONFIG_CAIF is not set -# CONFIG_CEPH_LIB is not set -# CONFIG_NFC is not set -CONFIG_HAVE_BPF_JIT=y - -# -# Device Drivers -# - -# -# Generic Driver Options -# -CONFIG_UEVENT_HELPER=y -CONFIG_UEVENT_HELPER_PATH="" -CONFIG_DEVTMPFS=y -CONFIG_DEVTMPFS_MOUNT=y -# CONFIG_STANDALONE is not set -CONFIG_PREVENT_FIRMWARE_BUILD=y -CONFIG_FW_LOADER=y -CONFIG_FIRMWARE_IN_KERNEL=y -CONFIG_EXTRA_FIRMWARE="" -CONFIG_FW_LOADER_USER_HELPER=y -# CONFIG_DEBUG_DRIVER is not set -# CONFIG_DEBUG_DEVRES is not set -# CONFIG_SYS_HYPERVISOR is not set -# CONFIG_GENERIC_CPU_DEVICES is not set -CONFIG_SOC_BUS=y -CONFIG_REGMAP=y -CONFIG_REGMAP_I2C=y -CONFIG_REGMAP_SPI=y -CONFIG_REGMAP_MMIO=y -CONFIG_REGMAP_IRQ=y -CONFIG_DMA_SHARED_BUFFER=y -CONFIG_DMA_CMA=y - -# -# Default contiguous memory area size: -# -CONFIG_CMA_SIZE_MBYTES=16 -CONFIG_CMA_SIZE_SEL_MBYTES=y -# CONFIG_CMA_SIZE_SEL_PERCENTAGE is not set -# CONFIG_CMA_SIZE_SEL_MIN is not set -# CONFIG_CMA_SIZE_SEL_MAX is not set -CONFIG_CMA_ALIGNMENT=8 -CONFIG_CMA_AREAS=7 - -# -# Bus devices -# -# CONFIG_BRCMSTB_GISB_ARB is not set -CONFIG_IMX_WEIM=y -# CONFIG_ARM_CCI is not set -# CONFIG_VEXPRESS_CONFIG is not set -CONFIG_CONNECTOR=y -CONFIG_PROC_EVENTS=y -CONFIG_MTD=y -# CONFIG_MTD_TESTS is not set -# CONFIG_MTD_REDBOOT_PARTS is not set -CONFIG_MTD_CMDLINE_PARTS=y -# CONFIG_MTD_AFS_PARTS is not set -CONFIG_MTD_OF_PARTS=y -# CONFIG_MTD_AR7_PARTS is not set - -# -# User Modules And Translation Layers -# -CONFIG_MTD_BLKDEVS=y -CONFIG_MTD_BLOCK=y -# CONFIG_FTL is not set -# CONFIG_NFTL is not set -# CONFIG_INFTL is not set -# CONFIG_RFD_FTL is not set -# CONFIG_SSFDC is not set -# CONFIG_SM_FTL is not set -# CONFIG_MTD_OOPS is not set -# CONFIG_MTD_SWAP is not set - -# -# RAM/ROM/Flash chip drivers -# -CONFIG_MTD_CFI=y -CONFIG_MTD_JEDECPROBE=y -CONFIG_MTD_GEN_PROBE=y -# CONFIG_MTD_CFI_ADV_OPTIONS is not set -CONFIG_MTD_MAP_BANK_WIDTH_1=y -CONFIG_MTD_MAP_BANK_WIDTH_2=y -CONFIG_MTD_MAP_BANK_WIDTH_4=y -# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set -# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set -# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set -CONFIG_MTD_CFI_I1=y -CONFIG_MTD_CFI_I2=y -# CONFIG_MTD_CFI_I4 is not set -# CONFIG_MTD_CFI_I8 is not set -CONFIG_MTD_CFI_INTELEXT=y -CONFIG_MTD_CFI_AMDSTD=y -CONFIG_MTD_CFI_STAA=y -CONFIG_MTD_CFI_UTIL=y -# CONFIG_MTD_RAM is not set -# CONFIG_MTD_ROM is not set -# CONFIG_MTD_ABSENT is not set - -# -# Mapping drivers for chip access -# -# CONFIG_MTD_COMPLEX_MAPPINGS is not set -# CONFIG_MTD_PHYSMAP is not set -CONFIG_MTD_PHYSMAP_OF=y -# CONFIG_MTD_IMPA7 is not set -# CONFIG_MTD_INTEL_VR_NOR is not set -# CONFIG_MTD_PLATRAM is not set - -# -# Self-contained MTD device drivers -# -# CONFIG_MTD_PMC551 is not set -CONFIG_MTD_DATAFLASH=y -# CONFIG_MTD_DATAFLASH_WRITE_VERIFY is not set -# CONFIG_MTD_DATAFLASH_OTP is not set -CONFIG_MTD_M25P80=y -CONFIG_MTD_SST25L=y -# CONFIG_MTD_SLRAM is not set -# CONFIG_MTD_PHRAM is not set -# CONFIG_MTD_MTDRAM is not set -# CONFIG_MTD_BLOCK2MTD is not set - -# -# Disk-On-Chip Device Drivers -# -# CONFIG_MTD_DOCG3 is not set -CONFIG_MTD_NAND_ECC=y -# CONFIG_MTD_NAND_ECC_SMC is not set -CONFIG_MTD_NAND=y -# CONFIG_MTD_NAND_ECC_BCH is not set -# CONFIG_MTD_SM_COMMON is not set -# CONFIG_MTD_NAND_DENALI is not set -# CONFIG_MTD_NAND_GPIO is not set -CONFIG_MTD_NAND_IDS=y -# CONFIG_MTD_NAND_RICOH is not set -# CONFIG_MTD_NAND_DISKONCHIP is not set -# CONFIG_MTD_NAND_DOCG4 is not set -# CONFIG_MTD_NAND_CAFE is not set -# CONFIG_MTD_NAND_NANDSIM is not set -CONFIG_MTD_NAND_GPMI_NAND=y -# CONFIG_MTD_NAND_PLATFORM is not set -CONFIG_MTD_NAND_MXC=y -# CONFIG_MTD_ONENAND is not set - -# -# LPDDR & LPDDR2 PCM memory drivers -# -# CONFIG_MTD_LPDDR is not set -# CONFIG_MTD_LPDDR2_NVM is not set -CONFIG_MTD_SPI_NOR=y -# CONFIG_SPI_FSL_QUADSPI is not set -CONFIG_MTD_UBI=y -CONFIG_MTD_UBI_WL_THRESHOLD=4096 -CONFIG_MTD_UBI_BEB_LIMIT=20 -# CONFIG_MTD_UBI_FASTMAP is not set -# CONFIG_MTD_UBI_GLUEBI is not set -# CONFIG_MTD_UBI_BLOCK is not set -CONFIG_DTC=y -CONFIG_OF=y - -# -# Device Tree and Open Firmware support -# -# CONFIG_OF_SELFTEST is not set -CONFIG_OF_FLATTREE=y -CONFIG_OF_EARLY_FLATTREE=y -CONFIG_OF_ADDRESS=y -CONFIG_OF_ADDRESS_PCI=y -CONFIG_OF_IRQ=y -CONFIG_OF_NET=y -CONFIG_OF_MDIO=y -CONFIG_OF_PCI=y -CONFIG_OF_PCI_IRQ=y -CONFIG_OF_MTD=y -CONFIG_OF_RESERVED_MEM=y -CONFIG_ARCH_MIGHT_HAVE_PC_PARPORT=y -# CONFIG_PARPORT is not set -CONFIG_BLK_DEV=y -# CONFIG_BLK_DEV_NULL_BLK is not set -# CONFIG_BLK_DEV_PCIESSD_MTIP32XX is not set -# CONFIG_BLK_CPQ_CISS_DA is not set -# CONFIG_BLK_DEV_DAC960 is not set -# CONFIG_BLK_DEV_UMEM is not set -# CONFIG_BLK_DEV_COW_COMMON is not set -CONFIG_BLK_DEV_LOOP=y -CONFIG_BLK_DEV_LOOP_MIN_COUNT=8 -# CONFIG_BLK_DEV_CRYPTOLOOP is not set -# CONFIG_BLK_DEV_DRBD is not set -# CONFIG_BLK_DEV_NBD is not set -# CONFIG_BLK_DEV_NVME is not set -# CONFIG_BLK_DEV_SX8 is not set -CONFIG_BLK_DEV_RAM=y -CONFIG_BLK_DEV_RAM_COUNT=16 -CONFIG_BLK_DEV_RAM_SIZE=65536 -# CONFIG_BLK_DEV_XIP is not set -# CONFIG_CDROM_PKTCDVD is not set -# CONFIG_ATA_OVER_ETH is not set -# CONFIG_MG_DISK is not set -# CONFIG_BLK_DEV_RBD is not set -# CONFIG_BLK_DEV_RSXX is not set - -# -# Misc devices -# -# CONFIG_SENSORS_LIS3LV02D is not set -# CONFIG_AD525X_DPOT is not set -# CONFIG_DUMMY_IRQ is not set -# CONFIG_PHANTOM is not set -# CONFIG_SGI_IOC4 is not set -# CONFIG_TIFM_CORE is not set -# CONFIG_ICS932S401 is not set -# CONFIG_ENCLOSURE_SERVICES is not set -# CONFIG_HP_ILO is not set -# CONFIG_APDS9802ALS is not set -# CONFIG_ISL29003 is not set -# CONFIG_ISL29020 is not set -# CONFIG_SENSORS_TSL2550 is not set -# CONFIG_SENSORS_BH1780 is not set -# CONFIG_SENSORS_BH1770 is not set -# CONFIG_SENSORS_APDS990X is not set -# CONFIG_HMC6352 is not set -# CONFIG_DS1682 is not set -# CONFIG_TI_DAC7512 is not set -# CONFIG_BMP085_I2C is not set -# CONFIG_BMP085_SPI is not set -# CONFIG_USB_SWITCH_FSA9480 is not set -# CONFIG_LATTICE_ECP3_CONFIG is not set -CONFIG_SRAM=y -# CONFIG_C2PORT is not set - -# -# EEPROM support -# -CONFIG_EEPROM_AT24=y -CONFIG_EEPROM_AT25=y -# CONFIG_EEPROM_LEGACY is not set -# CONFIG_EEPROM_MAX6875 is not set -# CONFIG_EEPROM_93CX6 is not set -# CONFIG_EEPROM_93XX46 is not set -# CONFIG_CB710_CORE is not set - -# -# Texas Instruments shared transport line discipline -# -# CONFIG_TI_ST is not set -# CONFIG_SENSORS_LIS3_SPI is not set -# CONFIG_SENSORS_LIS3_I2C is not set - -# -# Altera FPGA firmware download module -# -# CONFIG_ALTERA_STAPL is not set - -# -# Intel MIC Host Driver -# - -# -# Intel MIC Card Driver -# -# CONFIG_ECHO is not set -CONFIG_HAVE_IDE=y -# CONFIG_IDE is not set - -# -# SCSI device support -# -CONFIG_SCSI_MOD=y -# CONFIG_RAID_ATTRS is not set -CONFIG_SCSI=y -CONFIG_SCSI_DMA=y -# CONFIG_SCSI_TGT is not set -# CONFIG_SCSI_NETLINK is not set -# CONFIG_SCSI_PROC_FS is not set - -# -# SCSI support type (disk, tape, CD-ROM) -# -CONFIG_BLK_DEV_SD=y -# CONFIG_CHR_DEV_ST is not set -# CONFIG_CHR_DEV_OSST is not set -# CONFIG_BLK_DEV_SR is not set -# CONFIG_CHR_DEV_SG is not set -# CONFIG_CHR_DEV_SCH is not set -CONFIG_SCSI_MULTI_LUN=y -CONFIG_SCSI_CONSTANTS=y -CONFIG_SCSI_LOGGING=y -CONFIG_SCSI_SCAN_ASYNC=y - -# -# SCSI Transports -# -# CONFIG_SCSI_SPI_ATTRS is not set -# CONFIG_SCSI_FC_ATTRS is not set -# CONFIG_SCSI_ISCSI_ATTRS is not set -# CONFIG_SCSI_SAS_ATTRS is not set -# CONFIG_SCSI_SAS_LIBSAS is not set -# CONFIG_SCSI_SRP_ATTRS is not set -# CONFIG_SCSI_LOWLEVEL is not set -# CONFIG_SCSI_DH is not set -# CONFIG_SCSI_OSD_INITIATOR is not set -CONFIG_ATA=y -# CONFIG_ATA_NONSTANDARD is not set -CONFIG_ATA_VERBOSE_ERROR=y -CONFIG_SATA_PMP=y - -# -# Controllers with non-SFF native interface -# -# CONFIG_SATA_AHCI is not set -CONFIG_SATA_AHCI_PLATFORM=y -CONFIG_AHCI_IMX=y -# CONFIG_SATA_INIC162X is not set -# CONFIG_SATA_ACARD_AHCI is not set -# CONFIG_SATA_SIL24 is not set -CONFIG_ATA_SFF=y - -# -# SFF controllers with custom DMA interface -# -# CONFIG_PDC_ADMA is not set -# CONFIG_SATA_QSTOR is not set -# CONFIG_SATA_SX4 is not set -CONFIG_ATA_BMDMA=y - -# -# SATA SFF controllers with BMDMA -# -# CONFIG_ATA_PIIX is not set -# CONFIG_SATA_MV is not set -# CONFIG_SATA_NV is not set -# CONFIG_SATA_PROMISE is not set -# CONFIG_SATA_SIL is not set -# CONFIG_SATA_SIS is not set -# CONFIG_SATA_SVW is not set -# CONFIG_SATA_ULI is not set -# CONFIG_SATA_VIA is not set -# CONFIG_SATA_VITESSE is not set - -# -# PATA SFF controllers with BMDMA -# -# CONFIG_PATA_ALI is not set -# CONFIG_PATA_AMD is not set -# CONFIG_PATA_ARTOP is not set -# CONFIG_PATA_ATIIXP is not set -# CONFIG_PATA_ATP867X is not set -# CONFIG_PATA_CMD64X is not set -# CONFIG_PATA_CYPRESS is not set -# CONFIG_PATA_EFAR is not set -# CONFIG_PATA_HPT366 is not set -# CONFIG_PATA_HPT37X is not set -# CONFIG_PATA_HPT3X2N is not set -# CONFIG_PATA_HPT3X3 is not set -CONFIG_PATA_IMX=y -# CONFIG_PATA_IT8213 is not set -# CONFIG_PATA_IT821X is not set -# CONFIG_PATA_JMICRON is not set -# CONFIG_PATA_MARVELL is not set -# CONFIG_PATA_NETCELL is not set -# CONFIG_PATA_NINJA32 is not set -# CONFIG_PATA_NS87415 is not set -# CONFIG_PATA_OLDPIIX is not set -# CONFIG_PATA_OPTIDMA is not set -# CONFIG_PATA_PDC2027X is not set -# CONFIG_PATA_PDC_OLD is not set -# CONFIG_PATA_RADISYS is not set -# CONFIG_PATA_RDC is not set -# CONFIG_PATA_SCH is not set -# CONFIG_PATA_SERVERWORKS is not set -# CONFIG_PATA_SIL680 is not set -# CONFIG_PATA_SIS is not set -# CONFIG_PATA_TOSHIBA is not set -# CONFIG_PATA_TRIFLEX is not set -# CONFIG_PATA_VIA is not set -# CONFIG_PATA_WINBOND is not set - -# -# PIO-only SFF controllers -# -# CONFIG_PATA_CMD640_PCI is not set -# CONFIG_PATA_MPIIX is not set -# CONFIG_PATA_NS87410 is not set -# CONFIG_PATA_OPTI is not set -# CONFIG_PATA_PLATFORM is not set -# CONFIG_PATA_RZ1000 is not set - -# -# Generic fallback / legacy drivers -# -# CONFIG_ATA_GENERIC is not set -# CONFIG_PATA_LEGACY is not set -# CONFIG_MD is not set -# CONFIG_TARGET_CORE is not set -# CONFIG_FUSION is not set - -# -# IEEE 1394 (FireWire) support -# -# CONFIG_FIREWIRE is not set -# CONFIG_FIREWIRE_NOSY is not set -# CONFIG_I2O is not set -CONFIG_NETDEVICES=y -CONFIG_MII=y -CONFIG_NET_CORE=y -# CONFIG_BONDING is not set -# CONFIG_DUMMY is not set -# CONFIG_EQUALIZER is not set -# CONFIG_NET_FC is not set -# CONFIG_NET_TEAM is not set -# CONFIG_MACVLAN is not set -# CONFIG_VXLAN is not set -# CONFIG_NETCONSOLE is not set -# CONFIG_NETPOLL is not set -# CONFIG_NET_POLL_CONTROLLER is not set -# CONFIG_TUN is not set -# CONFIG_VETH is not set -# CONFIG_NLMON is not set -# CONFIG_ARCNET is not set - -# -# CAIF transport drivers -# - -# -# Distributed Switch Architecture drivers -# -# CONFIG_NET_DSA_MV88E6XXX is not set -# CONFIG_NET_DSA_MV88E6060 is not set -# CONFIG_NET_DSA_MV88E6XXX_NEED_PPU is not set -# CONFIG_NET_DSA_MV88E6131 is not set -# CONFIG_NET_DSA_MV88E6123_61_65 is not set -CONFIG_ETHERNET=y -CONFIG_NET_VENDOR_3COM=y -# CONFIG_VORTEX is not set -# CONFIG_TYPHOON is not set -CONFIG_NET_VENDOR_ADAPTEC=y -# CONFIG_ADAPTEC_STARFIRE is not set -CONFIG_NET_VENDOR_ALTEON=y -# CONFIG_ACENIC is not set -# CONFIG_ALTERA_TSE is not set -CONFIG_NET_VENDOR_AMD=y -# CONFIG_AMD8111_ETH is not set -# CONFIG_PCNET32 is not set -# CONFIG_AMD_XGBE is not set -CONFIG_NET_VENDOR_ARC=y -# CONFIG_ARC_EMAC is not set -CONFIG_NET_VENDOR_ATHEROS=y -# CONFIG_ATL2 is not set -# CONFIG_ATL1 is not set -# CONFIG_ATL1E is not set -# CONFIG_ATL1C is not set -# CONFIG_ALX is not set -CONFIG_NET_CADENCE=y -# CONFIG_NET_VENDOR_BROADCOM is not set -CONFIG_NET_VENDOR_BROCADE=y -# CONFIG_BNA is not set -# CONFIG_NET_CALXEDA_XGMAC is not set -CONFIG_NET_VENDOR_CHELSIO=y -# CONFIG_CHELSIO_T1 is not set -# CONFIG_CHELSIO_T3 is not set -# CONFIG_CHELSIO_T4 is not set -# CONFIG_CHELSIO_T4VF is not set -CONFIG_NET_VENDOR_CIRRUS=y -CONFIG_CS89x0=y -CONFIG_CS89x0_PLATFORM=y -CONFIG_NET_VENDOR_CISCO=y -# CONFIG_ENIC is not set -# CONFIG_DM9000 is not set -# CONFIG_DNET is not set -CONFIG_NET_VENDOR_DEC=y -# CONFIG_NET_TULIP is not set -CONFIG_NET_VENDOR_DLINK=y -# CONFIG_DL2K is not set -# CONFIG_SUNDANCE is not set -CONFIG_NET_VENDOR_EMULEX=y -# CONFIG_BE2NET is not set -CONFIG_NET_VENDOR_EXAR=y -# CONFIG_S2IO is not set -# CONFIG_VXGE is not set -# CONFIG_NET_VENDOR_FARADAY is not set -CONFIG_NET_VENDOR_FREESCALE=y -CONFIG_FEC=y -CONFIG_NET_VENDOR_HISILICON=y -# CONFIG_HIX5HD2_GMAC is not set -CONFIG_NET_VENDOR_HP=y -# CONFIG_HP100 is not set -# CONFIG_NET_VENDOR_INTEL is not set -# CONFIG_IP1000 is not set -# CONFIG_JME is not set -# CONFIG_NET_VENDOR_MARVELL is not set -CONFIG_NET_VENDOR_MELLANOX=y -# CONFIG_MLX4_EN is not set -# CONFIG_MLX4_CORE is not set -# CONFIG_MLX5_CORE is not set -# CONFIG_NET_VENDOR_MICREL is not set -# CONFIG_NET_VENDOR_MICROCHIP is not set -CONFIG_NET_VENDOR_MYRI=y -# CONFIG_MYRI10GE is not set -# CONFIG_FEALNX is not set -# CONFIG_NET_VENDOR_NATSEMI is not set -CONFIG_NET_VENDOR_NVIDIA=y -# CONFIG_FORCEDETH is not set -CONFIG_NET_VENDOR_OKI=y -# CONFIG_ETHOC is not set -CONFIG_NET_PACKET_ENGINE=y -# CONFIG_HAMACHI is not set -# CONFIG_YELLOWFIN is not set -CONFIG_NET_VENDOR_QLOGIC=y -# CONFIG_QLA3XXX is not set -# CONFIG_QLCNIC is not set -# CONFIG_QLGE is not set -# CONFIG_NETXEN_NIC is not set -CONFIG_NET_VENDOR_REALTEK=y -# CONFIG_8139CP is not set -# CONFIG_8139TOO is not set -# CONFIG_R8169 is not set -# CONFIG_SH_ETH is not set -CONFIG_NET_VENDOR_RDC=y -# CONFIG_R6040 is not set -CONFIG_NET_VENDOR_SAMSUNG=y -# CONFIG_SXGBE_ETH is not set -# CONFIG_NET_VENDOR_SEEQ is not set -CONFIG_NET_VENDOR_SILAN=y -# CONFIG_SC92031 is not set -CONFIG_NET_VENDOR_SIS=y -# CONFIG_SIS900 is not set -# CONFIG_SIS190 is not set -# CONFIG_SFC is not set -CONFIG_NET_VENDOR_SMSC=y -CONFIG_SMC91X=y -# CONFIG_EPIC100 is not set -CONFIG_SMC911X=y -CONFIG_SMSC911X=y -# CONFIG_SMSC911X_ARCH_HOOKS is not set -# CONFIG_SMSC9420 is not set -# CONFIG_NET_VENDOR_STMICRO is not set -CONFIG_NET_VENDOR_SUN=y -# CONFIG_HAPPYMEAL is not set -# CONFIG_SUNGEM is not set -# CONFIG_CASSINI is not set -# CONFIG_NIU is not set -CONFIG_NET_VENDOR_TEHUTI=y -# CONFIG_TEHUTI is not set -CONFIG_NET_VENDOR_TI=y -# CONFIG_TLAN is not set -CONFIG_NET_VENDOR_VIA=y -# CONFIG_VIA_RHINE is not set -# CONFIG_VIA_VELOCITY is not set -CONFIG_NET_VENDOR_WIZNET=y -# CONFIG_WIZNET_W5100 is not set -# CONFIG_WIZNET_W5300 is not set -# CONFIG_FDDI is not set -# CONFIG_HIPPI is not set -CONFIG_PHYLIB=y - -# -# MII PHY device drivers -# -CONFIG_AT803X_PHY=y -# CONFIG_AMD_PHY is not set -# CONFIG_AMD_XGBE_PHY is not set -# CONFIG_MARVELL_PHY is not set -# CONFIG_DAVICOM_PHY is not set -# CONFIG_QSEMI_PHY is not set -# CONFIG_LXT_PHY is not set -# CONFIG_CICADA_PHY is not set -# CONFIG_VITESSE_PHY is not set -# CONFIG_SMSC_PHY is not set -# CONFIG_BROADCOM_PHY is not set -# CONFIG_BCM7XXX_PHY is not set -# CONFIG_BCM87XX_PHY is not set -# CONFIG_ICPLUS_PHY is not set -# CONFIG_REALTEK_PHY is not set -# CONFIG_NATIONAL_PHY is not set -# CONFIG_STE10XP is not set -# CONFIG_LSI_ET1011C_PHY is not set -# CONFIG_MICREL_PHY is not set -# CONFIG_FIXED_PHY is not set -# CONFIG_MDIO_BITBANG is not set -# CONFIG_MDIO_BUS_MUX_GPIO is not set -# CONFIG_MDIO_BUS_MUX_MMIOREG is not set -# CONFIG_MICREL_KS8995MA is not set -# CONFIG_PPP is not set -# CONFIG_SLIP is not set - -# -# USB Network Adapters -# -# CONFIG_USB_CATC is not set -# CONFIG_USB_KAWETH is not set -# CONFIG_USB_PEGASUS is not set -# CONFIG_USB_RTL8150 is not set -# CONFIG_USB_RTL8152 is not set -# CONFIG_USB_USBNET is not set -# CONFIG_USB_HSO is not set -# CONFIG_USB_IPHETH is not set -CONFIG_WLAN=y -# CONFIG_LIBERTAS_THINFIRM is not set -# CONFIG_ATMEL is not set -# CONFIG_AT76C50X_USB is not set -# CONFIG_PRISM54 is not set -# CONFIG_USB_ZD1201 is not set -# CONFIG_USB_NET_RNDIS_WLAN is not set -# CONFIG_RTL8180 is not set -# CONFIG_RTL8187 is not set -# CONFIG_ADM8211 is not set -# CONFIG_MAC80211_HWSIM is not set -# CONFIG_MWL8K is not set -# CONFIG_ATH_CARDS is not set -# CONFIG_B43 is not set -# CONFIG_B43LEGACY is not set -CONFIG_BRCMUTIL=m -# CONFIG_BRCMSMAC is not set -CONFIG_BRCMFMAC=m -CONFIG_BRCMFMAC_SDIO=y -# CONFIG_BRCMFMAC_USB is not set -# CONFIG_BRCM_TRACING is not set -# CONFIG_BRCMDBG is not set -# CONFIG_HOSTAP is not set -# CONFIG_IPW2100 is not set -# CONFIG_IWLWIFI is not set -# CONFIG_IWL4965 is not set -# CONFIG_IWL3945 is not set -# CONFIG_LIBERTAS is not set -# CONFIG_P54_COMMON is not set -# CONFIG_RT2X00 is not set -CONFIG_RTL_CARDS=y -# CONFIG_RTL8192CE is not set -# CONFIG_RTL8192SE is not set -# CONFIG_RTL8192DE is not set -# CONFIG_RTL8723AE is not set -# CONFIG_RTL8723BE is not set -# CONFIG_RTL8188EE is not set -# CONFIG_RTL8192CU is not set -# CONFIG_WL_TI is not set -# CONFIG_ZD1211RW is not set -# CONFIG_MWIFIEX is not set -# CONFIG_CW1200 is not set -# CONFIG_RSI_91X is not set - -# -# Enable WiMAX (Networking options) to see the WiMAX drivers -# -# CONFIG_WAN is not set -# CONFIG_VMXNET3 is not set -# CONFIG_ISDN is not set - -# -# Input device support -# -CONFIG_INPUT=y -# CONFIG_INPUT_FF_MEMLESS is not set -CONFIG_INPUT_POLLDEV=y -# CONFIG_INPUT_SPARSEKMAP is not set -CONFIG_INPUT_MATRIXKMAP=y - -# -# Userland interfaces -# -CONFIG_INPUT_MOUSEDEV=y -# CONFIG_INPUT_MOUSEDEV_PSAUX is not set -CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024 -CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768 -# CONFIG_INPUT_JOYDEV is not set -CONFIG_INPUT_EVDEV=y -CONFIG_INPUT_EVBUG=m - -# -# Input Device Drivers -# -CONFIG_INPUT_KEYBOARD=y -# CONFIG_KEYBOARD_ADP5588 is not set -# CONFIG_KEYBOARD_ADP5589 is not set -CONFIG_KEYBOARD_ATKBD=y -# CONFIG_KEYBOARD_QT1070 is not set -# CONFIG_KEYBOARD_QT2160 is not set -# CONFIG_KEYBOARD_LKKBD is not set -CONFIG_KEYBOARD_GPIO=y -# CONFIG_KEYBOARD_GPIO_POLLED is not set -# CONFIG_KEYBOARD_TCA6416 is not set -# CONFIG_KEYBOARD_TCA8418 is not set -# CONFIG_KEYBOARD_MATRIX is not set -# CONFIG_KEYBOARD_LM8323 is not set -# CONFIG_KEYBOARD_LM8333 is not set -# CONFIG_KEYBOARD_MAX7359 is not set -# CONFIG_KEYBOARD_MCS is not set -# CONFIG_KEYBOARD_MPR121 is not set -CONFIG_KEYBOARD_IMX=y -# CONFIG_KEYBOARD_NEWTON is not set -# CONFIG_KEYBOARD_OPENCORES is not set -# CONFIG_KEYBOARD_SAMSUNG is not set -# CONFIG_KEYBOARD_STOWAWAY is not set -# CONFIG_KEYBOARD_SUNKBD is not set -# CONFIG_KEYBOARD_STMPE is not set -# CONFIG_KEYBOARD_OMAP4 is not set -# CONFIG_KEYBOARD_XTKBD is not set -CONFIG_INPUT_MOUSE=y -CONFIG_MOUSE_PS2=m -CONFIG_MOUSE_PS2_ALPS=y -CONFIG_MOUSE_PS2_LOGIPS2PP=y -CONFIG_MOUSE_PS2_SYNAPTICS=y -CONFIG_MOUSE_PS2_CYPRESS=y -CONFIG_MOUSE_PS2_TRACKPOINT=y -CONFIG_MOUSE_PS2_ELANTECH=y -# CONFIG_MOUSE_PS2_SENTELIC is not set -# CONFIG_MOUSE_PS2_TOUCHKIT is not set -# CONFIG_MOUSE_SERIAL is not set -# CONFIG_MOUSE_APPLETOUCH is not set -# CONFIG_MOUSE_BCM5974 is not set -# CONFIG_MOUSE_CYAPA is not set -# CONFIG_MOUSE_VSXXXAA is not set -# CONFIG_MOUSE_GPIO is not set -# CONFIG_MOUSE_SYNAPTICS_I2C is not set -# CONFIG_MOUSE_SYNAPTICS_USB is not set -# CONFIG_INPUT_JOYSTICK is not set -# CONFIG_INPUT_TABLET is not set -CONFIG_INPUT_TOUCHSCREEN=y -CONFIG_OF_TOUCHSCREEN=y -# CONFIG_TOUCHSCREEN_ADS7846 is not set -# CONFIG_TOUCHSCREEN_AD7877 is not set -# CONFIG_TOUCHSCREEN_AD7879 is not set -# CONFIG_TOUCHSCREEN_ATMEL_MXT is not set -# CONFIG_TOUCHSCREEN_AUO_PIXCIR is not set -# CONFIG_TOUCHSCREEN_BU21013 is not set -# CONFIG_TOUCHSCREEN_CY8CTMG110 is not set -# CONFIG_TOUCHSCREEN_CYTTSP_CORE is not set -# CONFIG_TOUCHSCREEN_CYTTSP4_CORE is not set -# CONFIG_TOUCHSCREEN_DA9052 is not set -# CONFIG_TOUCHSCREEN_DYNAPRO is not set -# CONFIG_TOUCHSCREEN_HAMPSHIRE is not set -# CONFIG_TOUCHSCREEN_EETI is not set -CONFIG_TOUCHSCREEN_EGALAX=y -# CONFIG_TOUCHSCREEN_FUJITSU is not set -# CONFIG_TOUCHSCREEN_ILI210X is not set -# CONFIG_TOUCHSCREEN_GUNZE is not set -# CONFIG_TOUCHSCREEN_ELO is not set -# CONFIG_TOUCHSCREEN_WACOM_W8001 is not set -# CONFIG_TOUCHSCREEN_WACOM_I2C is not set -# CONFIG_TOUCHSCREEN_MAX11801 is not set -# CONFIG_TOUCHSCREEN_MCS5000 is not set -# CONFIG_TOUCHSCREEN_MMS114 is not set -# CONFIG_TOUCHSCREEN_MTOUCH is not set -# CONFIG_TOUCHSCREEN_INEXIO is not set -# CONFIG_TOUCHSCREEN_MK712 is not set -# CONFIG_TOUCHSCREEN_PENMOUNT is not set -# CONFIG_TOUCHSCREEN_EDT_FT5X06 is not set -# CONFIG_TOUCHSCREEN_TOUCHRIGHT is not set -# CONFIG_TOUCHSCREEN_TOUCHWIN is not set -# CONFIG_TOUCHSCREEN_PIXCIR is not set -# CONFIG_TOUCHSCREEN_WM97XX is not set -# CONFIG_TOUCHSCREEN_USB_COMPOSITE is not set -CONFIG_TOUCHSCREEN_MC13783=y -# CONFIG_TOUCHSCREEN_TOUCHIT213 is not set -# CONFIG_TOUCHSCREEN_TSC_SERIO is not set -# CONFIG_TOUCHSCREEN_TSC2005 is not set -CONFIG_TOUCHSCREEN_TSC2007=y -# CONFIG_TOUCHSCREEN_ST1232 is not set -CONFIG_TOUCHSCREEN_STMPE=y -# CONFIG_TOUCHSCREEN_SUR40 is not set -# CONFIG_TOUCHSCREEN_TPS6507X is not set -# CONFIG_TOUCHSCREEN_ZFORCE is not set -CONFIG_INPUT_MISC=y -# CONFIG_INPUT_AD714X is not set -# CONFIG_INPUT_BMA150 is not set -# CONFIG_INPUT_MC13783_PWRBUTTON is not set -CONFIG_INPUT_MMA8450=y -# CONFIG_INPUT_MPU3050 is not set -# CONFIG_INPUT_GP2A is not set -# CONFIG_INPUT_GPIO_BEEPER is not set -# CONFIG_INPUT_GPIO_TILT_POLLED is not set -# CONFIG_INPUT_ATI_REMOTE2 is not set -# CONFIG_INPUT_KEYSPAN_REMOTE is not set -# CONFIG_INPUT_KXTJ9 is not set -# CONFIG_INPUT_POWERMATE is not set -# CONFIG_INPUT_YEALINK is not set -# CONFIG_INPUT_CM109 is not set -# CONFIG_INPUT_UINPUT is not set -# CONFIG_INPUT_PCF8574 is not set -# CONFIG_INPUT_PWM_BEEPER is not set -# CONFIG_INPUT_GPIO_ROTARY_ENCODER is not set -# CONFIG_INPUT_DA9052_ONKEY is not set -# CONFIG_INPUT_ADXL34X is not set -# CONFIG_INPUT_IMS_PCU is not set -# CONFIG_INPUT_CMA3000 is not set -# CONFIG_INPUT_SOC_BUTTON_ARRAY is not set - -# -# Hardware I/O ports -# -CONFIG_SERIO=y -CONFIG_SERIO_SERPORT=m -# CONFIG_SERIO_PCIPS2 is not set -CONFIG_SERIO_LIBPS2=y -# CONFIG_SERIO_RAW is not set -# CONFIG_SERIO_ALTERA_PS2 is not set -# CONFIG_SERIO_PS2MULT is not set -# CONFIG_SERIO_ARC_PS2 is not set -# CONFIG_SERIO_APBPS2 is not set -# CONFIG_GAMEPORT is not set - -# -# Character devices -# -CONFIG_TTY=y -CONFIG_VT=y -CONFIG_CONSOLE_TRANSLATIONS=y -CONFIG_VT_CONSOLE=y -CONFIG_VT_CONSOLE_SLEEP=y -CONFIG_HW_CONSOLE=y -CONFIG_VT_HW_CONSOLE_BINDING=y -CONFIG_UNIX98_PTYS=y -# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set -# CONFIG_LEGACY_PTYS is not set -# CONFIG_SERIAL_NONSTANDARD is not set -# CONFIG_NOZOMI is not set -# CONFIG_N_GSM is not set -# CONFIG_TRACE_SINK is not set -# CONFIG_DEVKMEM is not set - -# -# Serial drivers -# -# CONFIG_SERIAL_8250 is not set - -# -# Non-8250 serial port support -# -# CONFIG_SERIAL_EARLYCON_ARM_SEMIHOST is not set -# CONFIG_SERIAL_MAX3100 is not set -# CONFIG_SERIAL_MAX310X is not set -# CONFIG_SERIAL_MFD_HSU is not set -CONFIG_SERIAL_IMX=y -CONFIG_SERIAL_IMX_CONSOLE=y -CONFIG_SERIAL_CORE=y -CONFIG_SERIAL_CORE_CONSOLE=y -# CONFIG_SERIAL_JSM is not set -# CONFIG_SERIAL_SCCNXP is not set -# CONFIG_SERIAL_SC16IS7XX is not set -# CONFIG_SERIAL_ALTERA_JTAGUART is not set -# CONFIG_SERIAL_ALTERA_UART is not set -# CONFIG_SERIAL_IFX6X60 is not set -# CONFIG_SERIAL_XILINX_PS_UART is not set -# CONFIG_SERIAL_ARC is not set -# CONFIG_SERIAL_RP2 is not set -CONFIG_SERIAL_FSL_LPUART=y -CONFIG_SERIAL_FSL_LPUART_CONSOLE=y -# CONFIG_SERIAL_ST_ASC is not set -# CONFIG_TTY_PRINTK is not set -# CONFIG_HVC_DCC is not set -# CONFIG_IPMI_HANDLER is not set -CONFIG_HW_RANDOM=y -# CONFIG_HW_RANDOM_TIMERIOMEM is not set -CONFIG_HW_RANDOM_MXC_RNGA=y -# CONFIG_R3964 is not set -# CONFIG_APPLICOM is not set -# CONFIG_RAW_DRIVER is not set -# CONFIG_TCG_TPM is not set -CONFIG_DEVPORT=y -CONFIG_I2C=y -CONFIG_I2C_BOARDINFO=y -# CONFIG_I2C_COMPAT is not set -CONFIG_I2C_CHARDEV=y -CONFIG_I2C_MUX=y - -# -# Multiplexer I2C Chip support -# -# CONFIG_I2C_ARB_GPIO_CHALLENGE is not set -# CONFIG_I2C_MUX_GPIO is not set -# CONFIG_I2C_MUX_PCA9541 is not set -# CONFIG_I2C_MUX_PCA954x is not set -# CONFIG_I2C_MUX_PINCTRL is not set -# CONFIG_I2C_HELPER_AUTO is not set -# CONFIG_I2C_SMBUS is not set - -# -# I2C Algorithms -# -CONFIG_I2C_ALGOBIT=y -CONFIG_I2C_ALGOPCF=m -CONFIG_I2C_ALGOPCA=m - -# -# I2C Hardware Bus support -# - -# -# PC SMBus host controller drivers -# -# CONFIG_I2C_ALI1535 is not set -# CONFIG_I2C_ALI1563 is not set -# CONFIG_I2C_ALI15X3 is not set -# CONFIG_I2C_AMD756 is not set -# CONFIG_I2C_AMD8111 is not set -# CONFIG_I2C_I801 is not set -# CONFIG_I2C_ISCH is not set -# CONFIG_I2C_PIIX4 is not set -# CONFIG_I2C_NFORCE2 is not set -# CONFIG_I2C_SIS5595 is not set -# CONFIG_I2C_SIS630 is not set -# CONFIG_I2C_SIS96X is not set -# CONFIG_I2C_VIA is not set -# CONFIG_I2C_VIAPRO is not set - -# -# I2C system bus drivers (mostly embedded / system-on-chip) -# -# CONFIG_I2C_CBUS_GPIO is not set -# CONFIG_I2C_DESIGNWARE_PLATFORM is not set -# CONFIG_I2C_DESIGNWARE_PCI is not set -# CONFIG_I2C_GPIO is not set -CONFIG_I2C_IMX=y -# CONFIG_I2C_OCORES is not set -# CONFIG_I2C_PCA_PLATFORM is not set -# CONFIG_I2C_PXA_PCI is not set -# CONFIG_I2C_RK3X is not set -# CONFIG_I2C_SIMTEC is not set -# CONFIG_I2C_XILINX is not set - -# -# External I2C/SMBus adapter drivers -# -# CONFIG_I2C_DIOLAN_U2C is not set -# CONFIG_I2C_PARPORT_LIGHT is not set -# CONFIG_I2C_ROBOTFUZZ_OSIF is not set -# CONFIG_I2C_TAOS_EVM is not set -# CONFIG_I2C_TINY_USB is not set - -# -# Other I2C/SMBus bus drivers -# -# CONFIG_I2C_STUB is not set -# CONFIG_I2C_DEBUG_CORE is not set -# CONFIG_I2C_DEBUG_ALGO is not set -# CONFIG_I2C_DEBUG_BUS is not set -CONFIG_SPI=y -# CONFIG_SPI_DEBUG is not set -CONFIG_SPI_MASTER=y - -# -# SPI Master Controller Drivers -# -# CONFIG_SPI_ALTERA is not set -CONFIG_SPI_BITBANG=y -# CONFIG_SPI_CADENCE is not set -# CONFIG_SPI_GPIO is not set -CONFIG_SPI_IMX=y -# CONFIG_SPI_FSL_SPI is not set -# CONFIG_SPI_FSL_DSPI is not set -# CONFIG_SPI_OC_TINY is not set -# CONFIG_SPI_PXA2XX is not set -# CONFIG_SPI_PXA2XX_PCI is not set -# CONFIG_SPI_SC18IS602 is not set -# CONFIG_SPI_XCOMM is not set -# CONFIG_SPI_XILINX is not set -# CONFIG_SPI_DESIGNWARE is not set - -# -# SPI Protocol Masters -# -# CONFIG_SPI_SPIDEV is not set -# CONFIG_SPI_TLE62X0 is not set -# CONFIG_SPMI is not set -# CONFIG_HSI is not set - -# -# PPS support -# -CONFIG_PPS=y -# CONFIG_PPS_DEBUG is not set - -# -# PPS clients support -# -# CONFIG_PPS_CLIENT_KTIMER is not set -# CONFIG_PPS_CLIENT_LDISC is not set -# CONFIG_PPS_CLIENT_GPIO is not set - -# -# PPS generators support -# - -# -# PTP clock support -# -CONFIG_PTP_1588_CLOCK=y - -# -# Enable PHYLIB and NETWORK_PHY_TIMESTAMPING to see the additional clocks. -# -CONFIG_PINCTRL=y - -# -# Pin controllers -# -CONFIG_PINMUX=y -CONFIG_PINCONF=y -# CONFIG_DEBUG_PINCTRL is not set -# CONFIG_PINCTRL_BCM281XX is not set -CONFIG_PINCTRL_IMX=y -CONFIG_PINCTRL_IMX35=y -CONFIG_PINCTRL_IMX50=y -CONFIG_PINCTRL_IMX51=y -CONFIG_PINCTRL_IMX53=y -CONFIG_PINCTRL_IMX6Q=y -CONFIG_PINCTRL_IMX6SL=y -CONFIG_PINCTRL_VF610=y -# CONFIG_PINCTRL_APQ8064 is not set -# CONFIG_PINCTRL_IPQ8064 is not set -# CONFIG_PINCTRL_SINGLE is not set -CONFIG_ARCH_HAVE_CUSTOM_GPIO_H=y -CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y -CONFIG_ARCH_REQUIRE_GPIOLIB=y -CONFIG_GPIOLIB=y -CONFIG_GPIO_DEVRES=y -CONFIG_OF_GPIO=y -# CONFIG_DEBUG_GPIO is not set -CONFIG_GPIO_SYSFS=y -CONFIG_GPIO_GENERIC=y -# CONFIG_GPIO_DA9052 is not set - -# -# Memory mapped GPIO drivers: -# -# CONFIG_GPIO_GENERIC_PLATFORM is not set -# CONFIG_GPIO_DWAPB is not set -# CONFIG_GPIO_EM is not set -# CONFIG_GPIO_ZEVIO is not set -CONFIG_GPIO_MXC=y -# CONFIG_GPIO_SCH311X is not set -# CONFIG_GPIO_SYSCON is not set -# CONFIG_GPIO_VX855 is not set -# CONFIG_GPIO_GRGPIO is not set - -# -# I2C GPIO expanders: -# -# CONFIG_GPIO_MAX7300 is not set -# CONFIG_GPIO_MAX732X is not set -CONFIG_GPIO_MC9S08DZ60=y -# CONFIG_GPIO_PCA953X is not set -# CONFIG_GPIO_PCF857X is not set -# CONFIG_GPIO_SX150X is not set -# CONFIG_GPIO_STMPE is not set -# CONFIG_GPIO_ADP5588 is not set -# CONFIG_GPIO_ADNP is not set - -# -# PCI GPIO expanders: -# -# CONFIG_GPIO_BT8XX is not set -# CONFIG_GPIO_AMD8111 is not set -# CONFIG_GPIO_ML_IOH is not set -# CONFIG_GPIO_RDC321X is not set - -# -# SPI GPIO expanders: -# -# CONFIG_GPIO_MAX7301 is not set -# CONFIG_GPIO_MCP23S08 is not set -# CONFIG_GPIO_MC33880 is not set -# CONFIG_GPIO_74X164 is not set - -# -# AC97 GPIO expanders: -# - -# -# LPC GPIO expanders: -# - -# -# MODULbus GPIO expanders: -# -# CONFIG_GPIO_BCM_KONA is not set - -# -# USB GPIO expanders: -# -# CONFIG_W1 is not set -# CONFIG_POWER_SUPPLY is not set -# CONFIG_POWER_AVS is not set -# CONFIG_HWMON is not set -# CONFIG_THERMAL is not set -CONFIG_WATCHDOG=y -CONFIG_WATCHDOG_CORE=y -# CONFIG_WATCHDOG_NOWAYOUT is not set - -# -# Watchdog Device Drivers -# -# CONFIG_SOFT_WATCHDOG is not set -# CONFIG_DA9052_WATCHDOG is not set -# CONFIG_GPIO_WATCHDOG is not set -# CONFIG_XILINX_WATCHDOG is not set -# CONFIG_DW_WATCHDOG is not set -# CONFIG_MAX63XX_WATCHDOG is not set -CONFIG_IMX2_WDT=y -# CONFIG_ALIM7101_WDT is not set -# CONFIG_I6300ESB_WDT is not set -# CONFIG_MEN_A21_WDT is not set - -# -# PCI-based Watchdog Cards -# -# CONFIG_PCIPCWATCHDOG is not set -# CONFIG_WDTPCI is not set - -# -# USB-based Watchdog Cards -# -# CONFIG_USBPCWATCHDOG is not set -CONFIG_SSB_POSSIBLE=y - -# -# Sonics Silicon Backplane -# -# CONFIG_SSB is not set -CONFIG_BCMA_POSSIBLE=y - -# -# Broadcom specific AMBA -# -# CONFIG_BCMA is not set - -# -# Multifunction device drivers -# -CONFIG_MFD_CORE=y -# CONFIG_MFD_AS3711 is not set -# CONFIG_MFD_AS3722 is not set -# CONFIG_PMIC_ADP5520 is not set -# CONFIG_MFD_AAT2870_CORE is not set -# CONFIG_MFD_BCM590XX is not set -# CONFIG_MFD_AXP20X is not set -# CONFIG_MFD_CROS_EC is not set -# CONFIG_MFD_ASIC3 is not set -# CONFIG_PMIC_DA903X is not set -CONFIG_PMIC_DA9052=y -# CONFIG_MFD_DA9052_SPI is not set -CONFIG_MFD_DA9052_I2C=y -# CONFIG_MFD_DA9055 is not set -# CONFIG_MFD_DA9063 is not set -CONFIG_MFD_MC13XXX=y -CONFIG_MFD_MC13XXX_SPI=y -CONFIG_MFD_MC13XXX_I2C=y -# CONFIG_HTC_EGPIO is not set -# CONFIG_HTC_PASIC3 is not set -# CONFIG_HTC_I2CPLD is not set -# CONFIG_LPC_ICH is not set -# CONFIG_LPC_SCH is not set -# CONFIG_MFD_JANZ_CMODIO is not set -# CONFIG_MFD_KEMPLD is not set -# CONFIG_MFD_88PM800 is not set -# CONFIG_MFD_88PM805 is not set -# CONFIG_MFD_88PM860X is not set -# CONFIG_MFD_MAX14577 is not set -# CONFIG_MFD_MAX77686 is not set -# CONFIG_MFD_MAX77693 is not set -# CONFIG_MFD_MAX8907 is not set -# CONFIG_MFD_MAX8925 is not set -# CONFIG_MFD_MAX8997 is not set -# CONFIG_MFD_MAX8998 is not set -# CONFIG_EZX_PCAP is not set -# CONFIG_MFD_VIPERBOARD is not set -# CONFIG_MFD_RETU is not set -# CONFIG_MFD_PCF50633 is not set -# CONFIG_UCB1400_CORE is not set -# CONFIG_MFD_PM8921_CORE is not set -# CONFIG_MFD_RDC321X is not set -# CONFIG_MFD_RTSX_PCI is not set -# CONFIG_MFD_RTSX_USB is not set -# CONFIG_MFD_RC5T583 is not set -# CONFIG_MFD_SEC_CORE is not set -# CONFIG_MFD_SI476X_CORE is not set -# CONFIG_MFD_SM501 is not set -# CONFIG_MFD_SMSC is not set -# CONFIG_ABX500_CORE is not set -CONFIG_MFD_STMPE=y - -# -# STMicroelectronics STMPE Interface Drivers -# -CONFIG_STMPE_I2C=y -# CONFIG_STMPE_SPI is not set -CONFIG_MFD_SYSCON=y -# CONFIG_MFD_TI_AM335X_TSCADC is not set -# CONFIG_MFD_LP3943 is not set -# CONFIG_MFD_LP8788 is not set -# CONFIG_MFD_PALMAS is not set -# CONFIG_TPS6105X is not set -# CONFIG_TPS65010 is not set -# CONFIG_TPS6507X is not set -# CONFIG_MFD_TPS65090 is not set -# CONFIG_MFD_TPS65217 is not set -# CONFIG_MFD_TPS65218 is not set -# CONFIG_MFD_TPS6586X is not set -# CONFIG_MFD_TPS65910 is not set -# CONFIG_MFD_TPS65912 is not set -# CONFIG_MFD_TPS65912_I2C is not set -# CONFIG_MFD_TPS65912_SPI is not set -# CONFIG_MFD_TPS80031 is not set -# CONFIG_TWL4030_CORE is not set -# CONFIG_TWL6040_CORE is not set -# CONFIG_MFD_WL1273_CORE is not set -# CONFIG_MFD_LM3533 is not set -# CONFIG_MFD_TIMBERDALE is not set -# CONFIG_MFD_TC3589X is not set -# CONFIG_MFD_TMIO is not set -# CONFIG_MFD_T7L66XB is not set -# CONFIG_MFD_TC6387XB is not set -# CONFIG_MFD_TC6393XB is not set -# CONFIG_MFD_VX855 is not set -# CONFIG_MFD_ARIZONA_I2C is not set -# CONFIG_MFD_ARIZONA_SPI is not set -# CONFIG_MFD_WM8400 is not set -# CONFIG_MFD_WM831X_I2C is not set -# CONFIG_MFD_WM831X_SPI is not set -# CONFIG_MFD_WM8350_I2C is not set -# CONFIG_MFD_WM8994 is not set -CONFIG_REGULATOR=y -# CONFIG_REGULATOR_DEBUG is not set -CONFIG_REGULATOR_FIXED_VOLTAGE=y -# CONFIG_REGULATOR_VIRTUAL_CONSUMER is not set -# CONFIG_REGULATOR_USERSPACE_CONSUMER is not set -# CONFIG_REGULATOR_ACT8865 is not set -# CONFIG_REGULATOR_AD5398 is not set -CONFIG_REGULATOR_ANATOP=y -CONFIG_REGULATOR_DA9052=y -# CONFIG_REGULATOR_DA9210 is not set -# CONFIG_REGULATOR_FAN53555 is not set -CONFIG_REGULATOR_GPIO=y -# CONFIG_REGULATOR_ISL6271A is not set -# CONFIG_REGULATOR_LP3971 is not set -# CONFIG_REGULATOR_LP3972 is not set -# CONFIG_REGULATOR_LP872X is not set -# CONFIG_REGULATOR_LP8755 is not set -# CONFIG_REGULATOR_LTC3589 is not set -# CONFIG_REGULATOR_MAX1586 is not set -# CONFIG_REGULATOR_MAX8649 is not set -# CONFIG_REGULATOR_MAX8660 is not set -# CONFIG_REGULATOR_MAX8952 is not set -# CONFIG_REGULATOR_MAX8973 is not set -CONFIG_REGULATOR_MC13XXX_CORE=y -CONFIG_REGULATOR_MC13783=y -CONFIG_REGULATOR_MC13892=y -CONFIG_REGULATOR_PFUZE100=y -# CONFIG_REGULATOR_TPS51632 is not set -# CONFIG_REGULATOR_TPS62360 is not set -# CONFIG_REGULATOR_TPS65023 is not set -# CONFIG_REGULATOR_TPS6507X is not set -# CONFIG_REGULATOR_TPS6524X is not set -CONFIG_MEDIA_SUPPORT=y - -# -# Multimedia core support -# -CONFIG_MEDIA_CAMERA_SUPPORT=y -# CONFIG_MEDIA_ANALOG_TV_SUPPORT is not set -# CONFIG_MEDIA_DIGITAL_TV_SUPPORT is not set -# CONFIG_MEDIA_RADIO_SUPPORT is not set -CONFIG_MEDIA_RC_SUPPORT=y -# CONFIG_MEDIA_CONTROLLER is not set -CONFIG_VIDEO_DEV=y -CONFIG_VIDEO_V4L2=y -# CONFIG_VIDEO_ADV_DEBUG is not set -# CONFIG_VIDEO_FIXED_MINOR_RANGES is not set -CONFIG_V4L2_MEM2MEM_DEV=y -CONFIG_VIDEOBUF_GEN=y -CONFIG_VIDEOBUF2_CORE=y -CONFIG_VIDEOBUF2_MEMOPS=y -CONFIG_VIDEOBUF2_DMA_CONTIG=y -# CONFIG_TTPCI_EEPROM is not set - -# -# Media drivers -# -CONFIG_RC_CORE=y -CONFIG_RC_MAP=y -CONFIG_RC_DECODERS=y -# CONFIG_LIRC is not set -CONFIG_IR_NEC_DECODER=y -CONFIG_IR_RC5_DECODER=y -CONFIG_IR_RC6_DECODER=y -CONFIG_IR_JVC_DECODER=y -CONFIG_IR_SONY_DECODER=y -CONFIG_IR_RC5_SZ_DECODER=y -CONFIG_IR_SANYO_DECODER=y -CONFIG_IR_SHARP_DECODER=y -CONFIG_IR_MCE_KBD_DECODER=y -CONFIG_RC_DEVICES=y -# CONFIG_RC_ATI_REMOTE is not set -# CONFIG_IR_IMON is not set -# CONFIG_IR_MCEUSB is not set -# CONFIG_IR_REDRAT3 is not set -# CONFIG_IR_STREAMZAP is not set -# CONFIG_IR_IGUANA is not set -# CONFIG_IR_TTUSBIR is not set -# CONFIG_IR_IMG is not set -# CONFIG_RC_LOOPBACK is not set -CONFIG_IR_GPIO_CIR=y -# CONFIG_MEDIA_USB_SUPPORT is not set -# CONFIG_MEDIA_PCI_SUPPORT is not set -CONFIG_V4L_PLATFORM_DRIVERS=y -# CONFIG_VIDEO_CAFE_CCIC is not set -CONFIG_SOC_CAMERA=y -# CONFIG_SOC_CAMERA_PLATFORM is not set -CONFIG_VIDEO_MX3=y -# CONFIG_VIDEO_RCAR_VIN is not set -# CONFIG_VIDEO_SH_MOBILE_CSI2 is not set -# CONFIG_VIDEO_SH_MOBILE_CEU is not set -CONFIG_V4L_MEM2MEM_DRIVERS=y -CONFIG_VIDEO_CODA=y -# CONFIG_VIDEO_MEM2MEM_DEINTERLACE is not set -# CONFIG_VIDEO_SH_VEU is not set -# CONFIG_V4L_TEST_DRIVERS is not set - -# -# Supported MMC/SDIO adapters -# -# CONFIG_CYPRESS_FIRMWARE is not set - -# -# Media ancillary drivers (tuners, sensors, i2c, frontends) -# -CONFIG_MEDIA_SUBDRV_AUTOSELECT=y -CONFIG_VIDEO_IR_I2C=y - -# -# Audio decoders, processors and mixers -# - -# -# RDS decoders -# - -# -# Video decoders -# - -# -# Video and audio decoders -# - -# -# Video encoders -# - -# -# Camera sensor devices -# - -# -# Flash devices -# - -# -# Video improvement chips -# - -# -# Audio/Video compression chips -# - -# -# Miscellaneous helper chips -# - -# -# Sensors used on soc_camera driver -# - -# -# soc_camera sensor drivers -# -# CONFIG_SOC_CAMERA_IMX074 is not set -# CONFIG_SOC_CAMERA_MT9M001 is not set -# CONFIG_SOC_CAMERA_MT9M111 is not set -# CONFIG_SOC_CAMERA_MT9T031 is not set -# CONFIG_SOC_CAMERA_MT9T112 is not set -# CONFIG_SOC_CAMERA_MT9V022 is not set -CONFIG_SOC_CAMERA_OV2640=y -# CONFIG_SOC_CAMERA_OV5642 is not set -# CONFIG_SOC_CAMERA_OV6650 is not set -# CONFIG_SOC_CAMERA_OV772X is not set -# CONFIG_SOC_CAMERA_OV9640 is not set -# CONFIG_SOC_CAMERA_OV9740 is not set -# CONFIG_SOC_CAMERA_RJ54N1 is not set -# CONFIG_SOC_CAMERA_TW9910 is not set - -# -# Tools to develop new frontends -# -# CONFIG_DVB_DUMMY_FE is not set - -# -# Graphics support -# -CONFIG_VGA_ARB=y -CONFIG_VGA_ARB_MAX_GPUS=16 -CONFIG_IMX_IPUV3_CORE=y - -# -# Direct Rendering Manager -# -CONFIG_DRM=y -CONFIG_DRM_KMS_HELPER=y -CONFIG_DRM_KMS_FB_HELPER=y -# CONFIG_DRM_LOAD_EDID_FIRMWARE is not set -CONFIG_DRM_GEM_CMA_HELPER=y -CONFIG_DRM_KMS_CMA_HELPER=y - -# -# I2C encoder or helper chips -# -# CONFIG_DRM_I2C_CH7006 is not set -# CONFIG_DRM_I2C_SIL164 is not set -# CONFIG_DRM_I2C_NXP_TDA998X is not set -# CONFIG_DRM_PTN3460 is not set -# CONFIG_DRM_TDFX is not set -# CONFIG_DRM_R128 is not set -# CONFIG_DRM_RADEON is not set -# CONFIG_DRM_NOUVEAU is not set -# CONFIG_DRM_MGA is not set -# CONFIG_DRM_VIA is not set -# CONFIG_DRM_SAVAGE is not set -# CONFIG_DRM_EXYNOS is not set -# CONFIG_DRM_VMWGFX is not set -# CONFIG_DRM_UDL is not set -# CONFIG_DRM_AST is not set -# CONFIG_DRM_MGAG200 is not set -# CONFIG_DRM_CIRRUS_QEMU is not set -# CONFIG_DRM_ARMADA is not set -# CONFIG_DRM_TILCDC is not set -# CONFIG_DRM_QXL is not set -# CONFIG_DRM_BOCHS is not set -CONFIG_DRM_PANEL=y - -# -# Display Panels -# -CONFIG_DRM_PANEL_SIMPLE=y -# CONFIG_DRM_PANEL_LD9040 is not set -# CONFIG_DRM_PANEL_S6E8AA0 is not set - -# -# Frame buffer Devices -# -CONFIG_FB=y -# CONFIG_FIRMWARE_EDID is not set -# CONFIG_FB_DDC is not set -# CONFIG_FB_BOOT_VESA_SUPPORT is not set -CONFIG_FB_CFB_FILLRECT=y -CONFIG_FB_CFB_COPYAREA=y -CONFIG_FB_CFB_IMAGEBLIT=y -# CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set -CONFIG_FB_SYS_FILLRECT=y -CONFIG_FB_SYS_COPYAREA=y -CONFIG_FB_SYS_IMAGEBLIT=y -# CONFIG_FB_FOREIGN_ENDIAN is not set -# CONFIG_FB_SYS_FOPS is not set -# CONFIG_FB_SVGALIB is not set -# CONFIG_FB_MACMODES is not set -# CONFIG_FB_BACKLIGHT is not set -# CONFIG_FB_MODE_HELPERS is not set -# CONFIG_FB_TILEBLITTING is not set - -# -# Frame buffer hardware drivers -# -# CONFIG_FB_CIRRUS is not set -# CONFIG_FB_PM2 is not set -# CONFIG_FB_IMX is not set -# CONFIG_FB_CYBER2000 is not set -# CONFIG_FB_ASILIANT is not set -# CONFIG_FB_IMSTT is not set -# CONFIG_FB_UVESA is not set -# CONFIG_FB_OPENCORES is not set -# CONFIG_FB_S1D13XXX is not set -# CONFIG_FB_NVIDIA is not set -# CONFIG_FB_RIVA is not set -# CONFIG_FB_I740 is not set -# CONFIG_FB_MATROX is not set -# CONFIG_FB_RADEON is not set -# CONFIG_FB_ATY128 is not set -# CONFIG_FB_ATY is not set -# CONFIG_FB_S3 is not set -# CONFIG_FB_SAVAGE is not set -# CONFIG_FB_SIS is not set -# CONFIG_FB_NEOMAGIC is not set -# CONFIG_FB_KYRO is not set -# CONFIG_FB_3DFX is not set -# CONFIG_FB_VOODOO1 is not set -# CONFIG_FB_VT8623 is not set -# CONFIG_FB_TRIDENT is not set -# CONFIG_FB_ARK is not set -# CONFIG_FB_PM3 is not set -# CONFIG_FB_CARMINE is not set -# CONFIG_FB_SMSCUFX is not set -# CONFIG_FB_UDL is not set -# CONFIG_FB_VIRTUAL is not set -# CONFIG_FB_METRONOME is not set -# CONFIG_FB_MB862XX is not set -CONFIG_FB_MX3=y -# CONFIG_FB_BROADSHEET is not set -# CONFIG_FB_AUO_K190X is not set -# CONFIG_FB_SIMPLE is not set -# CONFIG_FB_SSD1307 is not set -CONFIG_BACKLIGHT_LCD_SUPPORT=y -CONFIG_LCD_CLASS_DEVICE=y -CONFIG_LCD_L4F00242T03=y -# CONFIG_LCD_LMS283GF05 is not set -# CONFIG_LCD_LTV350QV is not set -# CONFIG_LCD_ILI922X is not set -# CONFIG_LCD_ILI9320 is not set -# CONFIG_LCD_TDO24M is not set -# CONFIG_LCD_VGG2432A4 is not set -CONFIG_LCD_PLATFORM=y -# CONFIG_LCD_S6E63M0 is not set -# CONFIG_LCD_LD9040 is not set -# CONFIG_LCD_AMS369FG06 is not set -# CONFIG_LCD_LMS501KF03 is not set -# CONFIG_LCD_HX8357 is not set -CONFIG_BACKLIGHT_CLASS_DEVICE=y -CONFIG_BACKLIGHT_GENERIC=y -CONFIG_BACKLIGHT_PWM=y -# CONFIG_BACKLIGHT_DA9052 is not set -# CONFIG_BACKLIGHT_ADP8860 is not set -# CONFIG_BACKLIGHT_ADP8870 is not set -# CONFIG_BACKLIGHT_LM3630A is not set -# CONFIG_BACKLIGHT_LM3639 is not set -# CONFIG_BACKLIGHT_LP855X is not set -CONFIG_BACKLIGHT_GPIO=y -# CONFIG_BACKLIGHT_LV5207LP is not set -# CONFIG_BACKLIGHT_BD6107 is not set -# CONFIG_VGASTATE is not set -CONFIG_VIDEOMODE_HELPERS=y -CONFIG_HDMI=y - -# -# Console display driver support -# -CONFIG_DUMMY_CONSOLE=y -CONFIG_FRAMEBUFFER_CONSOLE=y -CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY=y -# CONFIG_FRAMEBUFFER_CONSOLE_ROTATION is not set -CONFIG_LOGO=y -CONFIG_LOGO_LINUX_MONO=y -CONFIG_LOGO_LINUX_VGA16=y -CONFIG_LOGO_LINUX_CLUT224=y -CONFIG_SOUND=y -# CONFIG_SOUND_OSS_CORE is not set -CONFIG_SND=y -CONFIG_SND_TIMER=y -CONFIG_SND_PCM=y -CONFIG_SND_DMAENGINE_PCM=y -CONFIG_SND_COMPRESS_OFFLOAD=y -CONFIG_SND_JACK=y -# CONFIG_SND_SEQUENCER is not set -# CONFIG_SND_MIXER_OSS is not set -# CONFIG_SND_PCM_OSS is not set -# CONFIG_SND_HRTIMER is not set -# CONFIG_SND_DYNAMIC_MINORS is not set -CONFIG_SND_SUPPORT_OLD_API=y -CONFIG_SND_VERBOSE_PROCFS=y -# CONFIG_SND_VERBOSE_PRINTK is not set -# CONFIG_SND_DEBUG is not set -# CONFIG_SND_RAWMIDI_SEQ is not set -# CONFIG_SND_OPL3_LIB_SEQ is not set -# CONFIG_SND_OPL4_LIB_SEQ is not set -# CONFIG_SND_SBAWE_SEQ is not set -# CONFIG_SND_EMU10K1_SEQ is not set -CONFIG_SND_DRIVERS=y -# CONFIG_SND_DUMMY is not set -# CONFIG_SND_ALOOP is not set -# CONFIG_SND_MTPAV is not set -# CONFIG_SND_SERIAL_U16550 is not set -# CONFIG_SND_MPU401 is not set -CONFIG_SND_PCI=y -# CONFIG_SND_AD1889 is not set -# CONFIG_SND_ALS300 is not set -# CONFIG_SND_ALI5451 is not set -# CONFIG_SND_ATIIXP is not set -# CONFIG_SND_ATIIXP_MODEM is not set -# CONFIG_SND_AU8810 is not set -# CONFIG_SND_AU8820 is not set -# CONFIG_SND_AU8830 is not set -# CONFIG_SND_AW2 is not set -# CONFIG_SND_AZT3328 is not set -# CONFIG_SND_BT87X is not set -# CONFIG_SND_CA0106 is not set -# CONFIG_SND_CMIPCI is not set -# CONFIG_SND_OXYGEN is not set -# CONFIG_SND_CS4281 is not set -# CONFIG_SND_CS46XX is not set -# CONFIG_SND_CTXFI is not set -# CONFIG_SND_DARLA20 is not set -# CONFIG_SND_GINA20 is not set -# CONFIG_SND_LAYLA20 is not set -# CONFIG_SND_DARLA24 is not set -# CONFIG_SND_GINA24 is not set -# CONFIG_SND_LAYLA24 is not set -# CONFIG_SND_MONA is not set -# CONFIG_SND_MIA is not set -# CONFIG_SND_ECHO3G is not set -# CONFIG_SND_INDIGO is not set -# CONFIG_SND_INDIGOIO is not set -# CONFIG_SND_INDIGODJ is not set -# CONFIG_SND_INDIGOIOX is not set -# CONFIG_SND_INDIGODJX is not set -# CONFIG_SND_EMU10K1 is not set -# CONFIG_SND_EMU10K1X is not set -# CONFIG_SND_ENS1370 is not set -# CONFIG_SND_ENS1371 is not set -# CONFIG_SND_ES1938 is not set -# CONFIG_SND_ES1968 is not set -# CONFIG_SND_FM801 is not set -# CONFIG_SND_HDSP is not set -# CONFIG_SND_HDSPM is not set -# CONFIG_SND_ICE1712 is not set -# CONFIG_SND_ICE1724 is not set -# CONFIG_SND_INTEL8X0 is not set -# CONFIG_SND_INTEL8X0M is not set -# CONFIG_SND_KORG1212 is not set -# CONFIG_SND_LOLA is not set -# CONFIG_SND_LX6464ES is not set -# CONFIG_SND_MAESTRO3 is not set -# CONFIG_SND_MIXART is not set -# CONFIG_SND_NM256 is not set -# CONFIG_SND_PCXHR is not set -# CONFIG_SND_RIPTIDE is not set -# CONFIG_SND_RME32 is not set -# CONFIG_SND_RME96 is not set -# CONFIG_SND_RME9652 is not set -# CONFIG_SND_SONICVIBES is not set -# CONFIG_SND_TRIDENT is not set -# CONFIG_SND_VIA82XX is not set -# CONFIG_SND_VIA82XX_MODEM is not set -# CONFIG_SND_VIRTUOSO is not set -# CONFIG_SND_VX222 is not set -# CONFIG_SND_YMFPCI is not set - -# -# HD-Audio -# -# CONFIG_SND_HDA_INTEL is not set -CONFIG_SND_ARM=y -CONFIG_SND_SPI=y -CONFIG_SND_USB=y -# CONFIG_SND_USB_AUDIO is not set -# CONFIG_SND_USB_UA101 is not set -# CONFIG_SND_USB_CAIAQ is not set -# CONFIG_SND_USB_6FIRE is not set -# CONFIG_SND_USB_HIFACE is not set -# CONFIG_SND_BCD2000 is not set -CONFIG_SND_SOC=y -CONFIG_SND_SOC_AC97_BUS=y -CONFIG_SND_SOC_GENERIC_DMAENGINE_PCM=y -# CONFIG_SND_ATMEL_SOC is not set -# CONFIG_SND_DESIGNWARE_I2S is not set - -# -# SoC Audio for Freescale CPUs -# - -# -# Common SoC Audio options for Freescale CPUs: -# -# CONFIG_SND_SOC_FSL_SAI is not set -CONFIG_SND_SOC_FSL_SSI=y -CONFIG_SND_SOC_FSL_SPDIF=y -# CONFIG_SND_SOC_FSL_ESAI is not set -CONFIG_SND_SOC_FSL_UTILS=y -CONFIG_SND_SOC_IMX_PCM_DMA=y -CONFIG_SND_SOC_IMX_AUDMUX=y -CONFIG_SND_IMX_SOC=y -CONFIG_SND_SOC_IMX_SSI=y -CONFIG_SND_SOC_IMX_PCM_FIQ=y - -# -# SoC Audio support for Freescale i.MX boards: -# -CONFIG_SND_SOC_PHYCORE_AC97=y -CONFIG_SND_SOC_EUKREA_TLV320=y -CONFIG_SND_SOC_IMX_WM8962=y -CONFIG_SND_SOC_IMX_SGTL5000=y -CONFIG_SND_SOC_IMX_SPDIF=y -CONFIG_SND_SOC_IMX_MC13783=y -CONFIG_SND_SOC_I2C_AND_SPI=y - -# -# CODEC drivers -# -# CONFIG_SND_SOC_ADAU1701 is not set -# CONFIG_SND_SOC_AK4104 is not set -# CONFIG_SND_SOC_AK4554 is not set -# CONFIG_SND_SOC_AK4642 is not set -# CONFIG_SND_SOC_AK5386 is not set -# CONFIG_SND_SOC_ALC5623 is not set -# CONFIG_SND_SOC_CS42L52 is not set -# CONFIG_SND_SOC_CS42L56 is not set -# CONFIG_SND_SOC_CS42L73 is not set -# CONFIG_SND_SOC_CS4270 is not set -# CONFIG_SND_SOC_CS4271 is not set -# CONFIG_SND_SOC_CS42XX8_I2C is not set -# CONFIG_SND_SOC_HDMI_CODEC is not set -# CONFIG_SND_SOC_PCM1681 is not set -# CONFIG_SND_SOC_PCM1792A is not set -# CONFIG_SND_SOC_PCM512x_I2C is not set -# CONFIG_SND_SOC_PCM512x_SPI is not set -CONFIG_SND_SOC_SGTL5000=y -# CONFIG_SND_SOC_SIRF_AUDIO_CODEC is not set -# CONFIG_SND_SOC_SPDIF is not set -# CONFIG_SND_SOC_STA350 is not set -# CONFIG_SND_SOC_TAS5086 is not set -CONFIG_SND_SOC_TLV320AIC23=y -CONFIG_SND_SOC_TLV320AIC23_I2C=y -# CONFIG_SND_SOC_TLV320AIC3X is not set -# CONFIG_SND_SOC_WM8510 is not set -# CONFIG_SND_SOC_WM8523 is not set -# CONFIG_SND_SOC_WM8580 is not set -# CONFIG_SND_SOC_WM8711 is not set -# CONFIG_SND_SOC_WM8728 is not set -# CONFIG_SND_SOC_WM8731 is not set -# CONFIG_SND_SOC_WM8737 is not set -# CONFIG_SND_SOC_WM8741 is not set -# CONFIG_SND_SOC_WM8750 is not set -# CONFIG_SND_SOC_WM8753 is not set -# CONFIG_SND_SOC_WM8770 is not set -# CONFIG_SND_SOC_WM8776 is not set -# CONFIG_SND_SOC_WM8804 is not set -# CONFIG_SND_SOC_WM8903 is not set -CONFIG_SND_SOC_WM8962=y -CONFIG_SND_SOC_WM9712=y -CONFIG_SND_SOC_MC13783=y -# CONFIG_SND_SOC_TPA6130A2 is not set -# CONFIG_SND_SIMPLE_CARD is not set -# CONFIG_SOUND_PRIME is not set -CONFIG_AC97_BUS=y - -# -# HID support -# -CONFIG_HID=y -# CONFIG_HIDRAW is not set -# CONFIG_UHID is not set -CONFIG_HID_GENERIC=y - -# -# Special HID drivers -# -# CONFIG_HID_A4TECH is not set -# CONFIG_HID_ACRUX is not set -# CONFIG_HID_APPLE is not set -# CONFIG_HID_APPLEIR is not set -# CONFIG_HID_AUREAL is not set -# CONFIG_HID_BELKIN is not set -# CONFIG_HID_CHERRY is not set -# CONFIG_HID_CHICONY is not set -# CONFIG_HID_PRODIKEYS is not set -# CONFIG_HID_CP2112 is not set -# CONFIG_HID_CYPRESS is not set -# CONFIG_HID_DRAGONRISE is not set -# CONFIG_HID_EMS_FF is not set -# CONFIG_HID_ELECOM is not set -# CONFIG_HID_ELO is not set -# CONFIG_HID_EZKEY is not set -# CONFIG_HID_HOLTEK is not set -# CONFIG_HID_HUION is not set -# CONFIG_HID_KEYTOUCH is not set -# CONFIG_HID_KYE is not set -# CONFIG_HID_UCLOGIC is not set -# CONFIG_HID_WALTOP is not set -# CONFIG_HID_GYRATION is not set -# CONFIG_HID_ICADE is not set -# CONFIG_HID_TWINHAN is not set -# CONFIG_HID_KENSINGTON is not set -# CONFIG_HID_LCPOWER is not set -# CONFIG_HID_LENOVO_TPKBD is not set -# CONFIG_HID_LOGITECH is not set -# CONFIG_HID_MAGICMOUSE is not set -# CONFIG_HID_MICROSOFT is not set -# CONFIG_HID_MONTEREY is not set -# CONFIG_HID_MULTITOUCH is not set -# CONFIG_HID_NTRIG is not set -# CONFIG_HID_ORTEK is not set -# CONFIG_HID_PANTHERLORD is not set -# CONFIG_HID_PETALYNX is not set -# CONFIG_HID_PICOLCD is not set -# CONFIG_HID_PRIMAX is not set -# CONFIG_HID_ROCCAT is not set -# CONFIG_HID_SAITEK is not set -# CONFIG_HID_SAMSUNG is not set -# CONFIG_HID_SONY is not set -# CONFIG_HID_SPEEDLINK is not set -# CONFIG_HID_STEELSERIES is not set -# CONFIG_HID_SUNPLUS is not set -# CONFIG_HID_RMI is not set -# CONFIG_HID_GREENASIA is not set -# CONFIG_HID_SMARTJOYPLUS is not set -# CONFIG_HID_TIVO is not set -# CONFIG_HID_TOPSEED is not set -# CONFIG_HID_THINGM is not set -# CONFIG_HID_THRUSTMASTER is not set -# CONFIG_HID_WACOM is not set -# CONFIG_HID_WIIMOTE is not set -# CONFIG_HID_XINMO is not set -# CONFIG_HID_ZEROPLUS is not set -# CONFIG_HID_ZYDACRON is not set -# CONFIG_HID_SENSOR_HUB is not set - -# -# USB HID support -# -CONFIG_USB_HID=y -# CONFIG_HID_PID is not set -# CONFIG_USB_HIDDEV is not set - -# -# I2C HID support -# -# CONFIG_I2C_HID is not set -CONFIG_USB_OHCI_LITTLE_ENDIAN=y -CONFIG_USB_SUPPORT=y -CONFIG_USB_COMMON=y -CONFIG_USB_ARCH_HAS_HCD=y -CONFIG_USB=y -# CONFIG_USB_ANNOUNCE_NEW_DEVICES is not set - -# -# Miscellaneous USB options -# -CONFIG_USB_DEFAULT_PERSIST=y -# CONFIG_USB_DYNAMIC_MINORS is not set -# CONFIG_USB_OTG is not set -# CONFIG_USB_OTG_WHITELIST is not set -# CONFIG_USB_OTG_BLACKLIST_HUB is not set -# CONFIG_USB_OTG_FSM is not set -# CONFIG_USB_MON is not set -# CONFIG_USB_WUSB_CBAF is not set - -# -# USB Host Controller Drivers -# -# CONFIG_USB_C67X00_HCD is not set -# CONFIG_USB_XHCI_HCD is not set -CONFIG_USB_EHCI_HCD=y -CONFIG_USB_EHCI_ROOT_HUB_TT=y -CONFIG_USB_EHCI_TT_NEWSCHED=y -CONFIG_USB_EHCI_PCI=y -CONFIG_USB_EHCI_MXC=y -# CONFIG_USB_EHCI_HCD_PLATFORM is not set -# CONFIG_USB_OXU210HP_HCD is not set -# CONFIG_USB_ISP116X_HCD is not set -# CONFIG_USB_ISP1760_HCD is not set -# CONFIG_USB_ISP1362_HCD is not set -# CONFIG_USB_FUSBH200_HCD is not set -# CONFIG_USB_FOTG210_HCD is not set -# CONFIG_USB_MAX3421_HCD is not set -# CONFIG_USB_OHCI_HCD is not set -# CONFIG_USB_UHCI_HCD is not set -# CONFIG_USB_SL811_HCD is not set -# CONFIG_USB_R8A66597_HCD is not set -# CONFIG_USB_IMX21_HCD is not set -# CONFIG_USB_HCD_TEST_MODE is not set -# CONFIG_USB_RENESAS_USBHS is not set - -# -# USB Device Class drivers -# -# CONFIG_USB_ACM is not set -# CONFIG_USB_PRINTER is not set -# CONFIG_USB_WDM is not set -# CONFIG_USB_TMC is not set - -# -# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may -# - -# -# also be needed; see USB_STORAGE Help for more info -# -CONFIG_USB_STORAGE=y -# CONFIG_USB_STORAGE_DEBUG is not set -# CONFIG_USB_STORAGE_REALTEK is not set -# CONFIG_USB_STORAGE_DATAFAB is not set -# CONFIG_USB_STORAGE_FREECOM is not set -# CONFIG_USB_STORAGE_ISD200 is not set -# CONFIG_USB_STORAGE_USBAT is not set -# CONFIG_USB_STORAGE_SDDR09 is not set -# CONFIG_USB_STORAGE_SDDR55 is not set -# CONFIG_USB_STORAGE_JUMPSHOT is not set -# CONFIG_USB_STORAGE_ALAUDA is not set -# CONFIG_USB_STORAGE_ONETOUCH is not set -# CONFIG_USB_STORAGE_KARMA is not set -# CONFIG_USB_STORAGE_CYPRESS_ATACB is not set -# CONFIG_USB_STORAGE_ENE_UB6250 is not set -# CONFIG_USB_UAS is not set - -# -# USB Imaging devices -# -# CONFIG_USB_MDC800 is not set -# CONFIG_USB_MICROTEK is not set -# CONFIG_USB_MUSB_HDRC is not set -# CONFIG_USB_DWC3 is not set -# CONFIG_USB_DWC2 is not set -CONFIG_USB_CHIPIDEA=y -CONFIG_USB_CHIPIDEA_UDC=y -CONFIG_USB_CHIPIDEA_HOST=y -# CONFIG_USB_CHIPIDEA_DEBUG is not set - -# -# USB port drivers -# -# CONFIG_USB_SERIAL is not set - -# -# USB Miscellaneous drivers -# -# CONFIG_USB_EMI62 is not set -# CONFIG_USB_EMI26 is not set -# CONFIG_USB_ADUTUX is not set -# CONFIG_USB_SEVSEG is not set -# CONFIG_USB_RIO500 is not set -# CONFIG_USB_LEGOTOWER is not set -# CONFIG_USB_LCD is not set -# CONFIG_USB_LED is not set -# CONFIG_USB_CYPRESS_CY7C63 is not set -# CONFIG_USB_CYTHERM is not set -# CONFIG_USB_IDMOUSE is not set -# CONFIG_USB_FTDI_ELAN is not set -# CONFIG_USB_APPLEDISPLAY is not set -# CONFIG_USB_SISUSBVGA is not set -# CONFIG_USB_LD is not set -# CONFIG_USB_TRANCEVIBRATOR is not set -# CONFIG_USB_IOWARRIOR is not set -# CONFIG_USB_TEST is not set -# CONFIG_USB_EHSET_TEST_FIXTURE is not set -# CONFIG_USB_ISIGHTFW is not set -# CONFIG_USB_YUREX is not set -# CONFIG_USB_EZUSB_FX2 is not set -# CONFIG_USB_HSIC_USB3503 is not set - -# -# USB Physical Layer drivers -# -CONFIG_USB_PHY=y -CONFIG_NOP_USB_XCEIV=y -# CONFIG_AM335X_PHY_USB is not set -# CONFIG_SAMSUNG_USB2PHY is not set -# CONFIG_SAMSUNG_USB3PHY is not set -# CONFIG_USB_GPIO_VBUS is not set -# CONFIG_USB_ISP1301 is not set -CONFIG_USB_MXS_PHY=y -# CONFIG_USB_ULPI is not set -CONFIG_USB_GADGET=y -# CONFIG_USB_GADGET_DEBUG is not set -# CONFIG_USB_GADGET_DEBUG_FILES is not set -# CONFIG_USB_GADGET_DEBUG_FS is not set -CONFIG_USB_GADGET_VBUS_DRAW=2 -CONFIG_USB_GADGET_STORAGE_NUM_BUFFERS=2 - -# -# USB Peripheral Controller -# -# CONFIG_USB_FSL_USB2 is not set -# CONFIG_USB_FUSB300 is not set -# CONFIG_USB_FOTG210_UDC is not set -# CONFIG_USB_GR_UDC is not set -# CONFIG_USB_R8A66597 is not set -# CONFIG_USB_PXA27X is not set -# CONFIG_USB_MV_UDC is not set -# CONFIG_USB_MV_U3D is not set -# CONFIG_USB_M66592 is not set -# CONFIG_USB_AMD5536UDC is not set -# CONFIG_USB_NET2272 is not set -# CONFIG_USB_NET2280 is not set -# CONFIG_USB_GOKU is not set -# CONFIG_USB_EG20T is not set -# CONFIG_USB_DUMMY_HCD is not set -CONFIG_USB_LIBCOMPOSITE=m -CONFIG_USB_U_ETHER=m -CONFIG_USB_F_ECM=m -CONFIG_USB_F_SUBSET=m -CONFIG_USB_F_RNDIS=m -CONFIG_USB_F_MASS_STORAGE=m -# CONFIG_USB_CONFIGFS is not set -# CONFIG_USB_ZERO is not set -# CONFIG_USB_AUDIO is not set -CONFIG_USB_ETH=m -CONFIG_USB_ETH_RNDIS=y -# CONFIG_USB_ETH_EEM is not set -# CONFIG_USB_G_NCM is not set -# CONFIG_USB_GADGETFS is not set -# CONFIG_USB_FUNCTIONFS is not set -CONFIG_USB_MASS_STORAGE=m -# CONFIG_USB_G_SERIAL is not set -# CONFIG_USB_MIDI_GADGET is not set -# CONFIG_USB_G_PRINTER is not set -# CONFIG_USB_CDC_COMPOSITE is not set -# CONFIG_USB_G_ACM_MS is not set -# CONFIG_USB_G_MULTI is not set -# CONFIG_USB_G_HID is not set -# CONFIG_USB_G_DBGP is not set -# CONFIG_USB_G_WEBCAM is not set -# CONFIG_UWB is not set -CONFIG_MMC=y -# CONFIG_MMC_DEBUG is not set -# CONFIG_MMC_CLKGATE is not set - -# -# MMC/SD/SDIO Card Drivers -# -CONFIG_MMC_BLOCK=y -CONFIG_MMC_BLOCK_MINORS=8 -CONFIG_MMC_BLOCK_BOUNCE=y -# CONFIG_SDIO_UART is not set -# CONFIG_MMC_TEST is not set - -# -# MMC/SD/SDIO Host Controller Drivers -# -CONFIG_MMC_SDHCI=y -CONFIG_MMC_SDHCI_IO_ACCESSORS=y -# CONFIG_MMC_SDHCI_PCI is not set -CONFIG_MMC_SDHCI_PLTFM=y -# CONFIG_MMC_SDHCI_OF_ARASAN is not set -CONFIG_MMC_SDHCI_ESDHC_IMX=y -# CONFIG_MMC_SDHCI_PXAV3 is not set -# CONFIG_MMC_SDHCI_PXAV2 is not set -# CONFIG_MMC_MXC is not set -# CONFIG_MMC_TIFM_SD is not set -# CONFIG_MMC_CB710 is not set -# CONFIG_MMC_VIA_SDMMC is not set -# CONFIG_MMC_DW is not set -# CONFIG_MMC_VUB300 is not set -# CONFIG_MMC_USHC is not set -# CONFIG_MMC_USDHI6ROL0 is not set -# CONFIG_MEMSTICK is not set -CONFIG_LEDS_GPIO_REGISTER=y -CONFIG_NEW_LEDS=y -CONFIG_LEDS_CLASS=y - -# -# LED drivers -# -# CONFIG_LEDS_LM3530 is not set -# CONFIG_LEDS_LM3642 is not set -# CONFIG_LEDS_PCA9532 is not set -CONFIG_LEDS_GPIO=y -# CONFIG_LEDS_LP3944 is not set -# CONFIG_LEDS_LP5521 is not set -# CONFIG_LEDS_LP5523 is not set -# CONFIG_LEDS_LP5562 is not set -# CONFIG_LEDS_LP8501 is not set -# CONFIG_LEDS_PCA955X is not set -# CONFIG_LEDS_PCA963X is not set -# CONFIG_LEDS_DA9052 is not set -# CONFIG_LEDS_DAC124S085 is not set -# CONFIG_LEDS_PWM is not set -# CONFIG_LEDS_REGULATOR is not set -# CONFIG_LEDS_BD2802 is not set -# CONFIG_LEDS_LT3593 is not set -# CONFIG_LEDS_MC13783 is not set -# CONFIG_LEDS_TCA6507 is not set -# CONFIG_LEDS_LM355x is not set - -# -# LED driver for blink(1) USB RGB LED is under Special HID drivers (HID_THINGM) -# -# CONFIG_LEDS_BLINKM is not set - -# -# LED Triggers -# -CONFIG_LEDS_TRIGGERS=y -CONFIG_LEDS_TRIGGER_TIMER=y -CONFIG_LEDS_TRIGGER_ONESHOT=y -CONFIG_LEDS_TRIGGER_HEARTBEAT=y -CONFIG_LEDS_TRIGGER_BACKLIGHT=y -# CONFIG_LEDS_TRIGGER_CPU is not set -CONFIG_LEDS_TRIGGER_GPIO=y -# CONFIG_LEDS_TRIGGER_DEFAULT_ON is not set - -# -# iptables trigger is under Netfilter config (LED target) -# -# CONFIG_LEDS_TRIGGER_TRANSIENT is not set -# CONFIG_LEDS_TRIGGER_CAMERA is not set -# CONFIG_ACCESSIBILITY is not set -# CONFIG_INFINIBAND is not set -# CONFIG_EDAC is not set -CONFIG_RTC_LIB=y -CONFIG_RTC_CLASS=y -CONFIG_RTC_HCTOSYS=y -CONFIG_RTC_SYSTOHC=y -CONFIG_RTC_HCTOSYS_DEVICE="rtc0" -# CONFIG_RTC_DEBUG is not set - -# -# RTC interfaces -# -CONFIG_RTC_INTF_SYSFS=y -CONFIG_RTC_INTF_PROC=y -CONFIG_RTC_INTF_DEV=y -CONFIG_RTC_INTF_DEV_UIE_EMUL=y -# CONFIG_RTC_DRV_TEST is not set - -# -# I2C RTC drivers -# -# CONFIG_RTC_DRV_DS1307 is not set -# CONFIG_RTC_DRV_DS1374 is not set -# CONFIG_RTC_DRV_DS1672 is not set -# CONFIG_RTC_DRV_DS3232 is not set -# CONFIG_RTC_DRV_HYM8563 is not set -# CONFIG_RTC_DRV_MAX6900 is not set -# CONFIG_RTC_DRV_RS5C372 is not set -# CONFIG_RTC_DRV_ISL1208 is not set -# CONFIG_RTC_DRV_ISL12022 is not set -# CONFIG_RTC_DRV_ISL12057 is not set -# CONFIG_RTC_DRV_X1205 is not set -# CONFIG_RTC_DRV_PCF2127 is not set -# CONFIG_RTC_DRV_PCF8523 is not set -CONFIG_RTC_DRV_PCF8563=y -# CONFIG_RTC_DRV_PCF8583 is not set -# CONFIG_RTC_DRV_M41T80 is not set -# CONFIG_RTC_DRV_BQ32K is not set -# CONFIG_RTC_DRV_S35390A is not set -# CONFIG_RTC_DRV_FM3130 is not set -# CONFIG_RTC_DRV_RX8581 is not set -# CONFIG_RTC_DRV_RX8025 is not set -# CONFIG_RTC_DRV_EM3027 is not set -# CONFIG_RTC_DRV_RV3029C2 is not set - -# -# SPI RTC drivers -# -# CONFIG_RTC_DRV_M41T93 is not set -# CONFIG_RTC_DRV_M41T94 is not set -# CONFIG_RTC_DRV_DS1305 is not set -# CONFIG_RTC_DRV_DS1343 is not set -# CONFIG_RTC_DRV_DS1347 is not set -# CONFIG_RTC_DRV_DS1390 is not set -# CONFIG_RTC_DRV_MAX6902 is not set -# CONFIG_RTC_DRV_R9701 is not set -# CONFIG_RTC_DRV_RS5C348 is not set -# CONFIG_RTC_DRV_DS3234 is not set -# CONFIG_RTC_DRV_PCF2123 is not set -# CONFIG_RTC_DRV_RX4581 is not set -# CONFIG_RTC_DRV_MCP795 is not set - -# -# Platform RTC drivers -# -# CONFIG_RTC_DRV_CMOS is not set -# CONFIG_RTC_DRV_DS1286 is not set -# CONFIG_RTC_DRV_DS1511 is not set -# CONFIG_RTC_DRV_DS1553 is not set -# CONFIG_RTC_DRV_DS1742 is not set -# CONFIG_RTC_DRV_DA9052 is not set -# CONFIG_RTC_DRV_STK17TA8 is not set -# CONFIG_RTC_DRV_M48T86 is not set -# CONFIG_RTC_DRV_M48T35 is not set -# CONFIG_RTC_DRV_M48T59 is not set -# CONFIG_RTC_DRV_MSM6242 is not set -# CONFIG_RTC_DRV_BQ4802 is not set -# CONFIG_RTC_DRV_RP5C01 is not set -# CONFIG_RTC_DRV_V3020 is not set -# CONFIG_RTC_DRV_DS2404 is not set - -# -# on-CPU RTC drivers -# -# CONFIG_RTC_DRV_IMXDI is not set -CONFIG_RTC_DRV_MC13XXX=y -CONFIG_RTC_DRV_MXC=y -CONFIG_RTC_DRV_SNVS=y -# CONFIG_RTC_DRV_MOXART is not set -# CONFIG_RTC_DRV_XGENE is not set - -# -# HID Sensor RTC drivers -# -# CONFIG_RTC_DRV_HID_SENSOR_TIME is not set -CONFIG_DMADEVICES=y -# CONFIG_DMADEVICES_DEBUG is not set - -# -# DMA Devices -# -# CONFIG_DW_DMAC_CORE is not set -# CONFIG_DW_DMAC is not set -# CONFIG_DW_DMAC_PCI is not set -CONFIG_MX3_IPU=y -CONFIG_MX3_IPU_IRQS=4 -CONFIG_IMX_SDMA=y -# CONFIG_IMX_DMA is not set -CONFIG_MXS_DMA=y -# CONFIG_FSL_EDMA is not set -CONFIG_DMA_ENGINE=y -CONFIG_DMA_OF=y - -# -# DMA Clients -# -# CONFIG_ASYNC_TX_DMA is not set -# CONFIG_DMATEST is not set -# CONFIG_AUXDISPLAY is not set -# CONFIG_UIO is not set -# CONFIG_VIRT_DRIVERS is not set - -# -# Virtio drivers -# -# CONFIG_VIRTIO_PCI is not set -# CONFIG_VIRTIO_MMIO is not set - -# -# Microsoft Hyper-V guest support -# -CONFIG_STAGING=y -# CONFIG_ET131X is not set -# CONFIG_USBIP_CORE is not set -# CONFIG_W35UND is not set -# CONFIG_PRISM2_USB is not set -# CONFIG_COMEDI is not set -# CONFIG_RTL8192U is not set -# CONFIG_RTLLIB is not set -# CONFIG_R8712U is not set -# CONFIG_R8188EU is not set -# CONFIG_R8192EE is not set -# CONFIG_R8723AU is not set -# CONFIG_R8821AE is not set -# CONFIG_RTS5208 is not set -# CONFIG_TRANZPORT is not set -# CONFIG_IDE_PHISON is not set -# CONFIG_LINE6_USB is not set -# CONFIG_VT6655 is not set -# CONFIG_VT6656 is not set -# CONFIG_DX_SEP is not set -# CONFIG_CRYSTALHD is not set -# CONFIG_FB_XGI is not set -# CONFIG_USB_ENESTORAGE is not set -# CONFIG_BCM_WIMAX is not set -# CONFIG_FT1000 is not set - -# -# Speakup console speech -# -# CONFIG_SPEAKUP is not set -# CONFIG_TOUCHSCREEN_CLEARPAD_TM1217 is not set -# CONFIG_TOUCHSCREEN_SYNAPTICS_I2C_RMI4 is not set -# CONFIG_STAGING_MEDIA is not set - -# -# Android -# -# CONFIG_ANDROID is not set -# CONFIG_USB_WPAN_HCD is not set -# CONFIG_WIMAX_GDM72XX is not set -# CONFIG_LTE_GDM724X is not set -CONFIG_NET_VENDOR_SILICOM=y -# CONFIG_SBYPASS is not set -# CONFIG_BPCTL is not set -# CONFIG_CED1401 is not set -CONFIG_DRM_IMX=y -CONFIG_DRM_IMX_FB_HELPER=y -CONFIG_DRM_IMX_PARALLEL_DISPLAY=y -CONFIG_DRM_IMX_TVE=y -CONFIG_DRM_IMX_LDB=y -CONFIG_DRM_IMX_IPUV3=y -CONFIG_DRM_IMX_HDMI=y -# CONFIG_DGRP is not set -# CONFIG_MTD_SPINAND_MT29F is not set -# CONFIG_LUSTRE_FS is not set -# CONFIG_XILLYBUS is not set -# CONFIG_DGNC is not set -# CONFIG_DGAP is not set -# CONFIG_GS_FPGABOOT is not set - -# -# SOC (System On Chip) specific Drivers -# -CONFIG_CLKDEV_LOOKUP=y -CONFIG_HAVE_CLK_PREPARE=y -CONFIG_COMMON_CLK=y - -# -# Common Clock Framework -# -# CONFIG_COMMON_CLK_SI5351 is not set -# CONFIG_COMMON_CLK_SI570 is not set -# CONFIG_COMMON_CLK_QCOM is not set - -# -# Hardware Spinlock drivers -# -CONFIG_CLKSRC_OF=y -CONFIG_CLKSRC_MMIO=y -CONFIG_VF_PIT_TIMER=y -# CONFIG_SH_TIMER_CMT is not set -# CONFIG_SH_TIMER_MTU2 is not set -# CONFIG_SH_TIMER_TMU is not set -# CONFIG_EM_TIMER_STI is not set -# CONFIG_CLKSRC_VERSATILE is not set -# CONFIG_MAILBOX is not set -# CONFIG_IOMMU_SUPPORT is not set - -# -# Remoteproc drivers -# -# CONFIG_STE_MODEM_RPROC is not set - -# -# Rpmsg drivers -# -# CONFIG_PM_DEVFREQ is not set -# CONFIG_EXTCON is not set -# CONFIG_MEMORY is not set -# CONFIG_IIO is not set -# CONFIG_VME_BUS is not set -CONFIG_PWM=y -CONFIG_PWM_SYSFS=y -# CONFIG_PWM_FSL_FTM is not set -CONFIG_PWM_IMX=y -# CONFIG_PWM_PCA9685 is not set -CONFIG_IRQCHIP=y -CONFIG_ARM_GIC=y -# CONFIG_IPACK_BUS is not set -CONFIG_ARCH_HAS_RESET_CONTROLLER=y -CONFIG_RESET_CONTROLLER=y -# CONFIG_FMC is not set - -# -# PHY Subsystem -# -# CONFIG_GENERIC_PHY is not set -# CONFIG_BCM_KONA_USB2_PHY is not set -# CONFIG_PHY_SAMSUNG_USB2 is not set -# CONFIG_POWERCAP is not set -# CONFIG_MCB is not set - -# -# File systems -# -CONFIG_DCACHE_WORD_ACCESS=y -CONFIG_EXT2_FS=y -CONFIG_EXT2_FS_XATTR=y -CONFIG_EXT2_FS_POSIX_ACL=y -CONFIG_EXT2_FS_SECURITY=y -# CONFIG_EXT2_FS_XIP is not set -CONFIG_EXT3_FS=y -CONFIG_EXT3_DEFAULTS_TO_ORDERED=y -CONFIG_EXT3_FS_XATTR=y -CONFIG_EXT3_FS_POSIX_ACL=y -CONFIG_EXT3_FS_SECURITY=y -CONFIG_EXT4_FS=y -CONFIG_EXT4_FS_POSIX_ACL=y -CONFIG_EXT4_FS_SECURITY=y -# CONFIG_EXT4_DEBUG is not set -CONFIG_JBD=y -# CONFIG_JBD_DEBUG is not set -CONFIG_JBD2=y -# CONFIG_JBD2_DEBUG is not set -CONFIG_FS_MBCACHE=y -# CONFIG_REISERFS_FS is not set -# CONFIG_JFS_FS is not set -# CONFIG_XFS_FS is not set -# CONFIG_GFS2_FS is not set -# CONFIG_OCFS2_FS is not set -# CONFIG_BTRFS_FS is not set -# CONFIG_NILFS2_FS is not set -CONFIG_FS_POSIX_ACL=y -CONFIG_FILE_LOCKING=y -CONFIG_FSNOTIFY=y -CONFIG_DNOTIFY=y -CONFIG_INOTIFY_USER=y -# CONFIG_FANOTIFY is not set -CONFIG_QUOTA=y -CONFIG_QUOTA_NETLINK_INTERFACE=y -# CONFIG_PRINT_QUOTA_WARNING is not set -# CONFIG_QUOTA_DEBUG is not set -# CONFIG_QFMT_V1 is not set -# CONFIG_QFMT_V2 is not set -CONFIG_QUOTACTL=y -CONFIG_AUTOFS4_FS=y -CONFIG_FUSE_FS=y -# CONFIG_CUSE is not set - -# -# Caches -# -# CONFIG_FSCACHE is not set - -# -# CD-ROM/DVD Filesystems -# -CONFIG_ISO9660_FS=m -CONFIG_JOLIET=y -CONFIG_ZISOFS=y -CONFIG_UDF_FS=m -CONFIG_UDF_NLS=y - -# -# DOS/FAT/NT Filesystems -# -CONFIG_FAT_FS=y -CONFIG_MSDOS_FS=m -CONFIG_VFAT_FS=y -CONFIG_FAT_DEFAULT_CODEPAGE=437 -CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1" -# CONFIG_NTFS_FS is not set - -# -# Pseudo filesystems -# -CONFIG_PROC_FS=y -CONFIG_PROC_SYSCTL=y -CONFIG_PROC_PAGE_MONITOR=y -CONFIG_KERNFS=y -CONFIG_SYSFS=y -CONFIG_TMPFS=y -# CONFIG_TMPFS_POSIX_ACL is not set -# CONFIG_TMPFS_XATTR is not set -# CONFIG_HUGETLB_PAGE is not set -CONFIG_CONFIGFS_FS=m -CONFIG_MISC_FILESYSTEMS=y -# CONFIG_ADFS_FS is not set -# CONFIG_AFFS_FS is not set -# CONFIG_ECRYPT_FS is not set -# CONFIG_HFS_FS is not set -# CONFIG_HFSPLUS_FS is not set -# CONFIG_BEFS_FS is not set -# CONFIG_BFS_FS is not set -# CONFIG_EFS_FS is not set -CONFIG_JFFS2_FS=y -CONFIG_JFFS2_FS_DEBUG=0 -CONFIG_JFFS2_FS_WRITEBUFFER=y -# CONFIG_JFFS2_FS_WBUF_VERIFY is not set -# CONFIG_JFFS2_SUMMARY is not set -# CONFIG_JFFS2_FS_XATTR is not set -# CONFIG_JFFS2_COMPRESSION_OPTIONS is not set -CONFIG_JFFS2_ZLIB=y -# CONFIG_JFFS2_LZO is not set -CONFIG_JFFS2_RTIME=y -# CONFIG_JFFS2_RUBIN is not set -CONFIG_UBIFS_FS=y -# CONFIG_UBIFS_FS_ADVANCED_COMPR is not set -CONFIG_UBIFS_FS_LZO=y -CONFIG_UBIFS_FS_ZLIB=y -# CONFIG_LOGFS is not set -# CONFIG_CRAMFS is not set -# CONFIG_SQUASHFS is not set -# CONFIG_VXFS_FS is not set -# CONFIG_MINIX_FS is not set -# CONFIG_OMFS_FS is not set -# CONFIG_HPFS_FS is not set -# CONFIG_QNX4FS_FS is not set -# CONFIG_QNX6FS_FS is not set -# CONFIG_ROMFS_FS is not set -# CONFIG_PSTORE is not set -# CONFIG_SYSV_FS is not set -# CONFIG_UFS_FS is not set -# CONFIG_F2FS_FS is not set -CONFIG_NETWORK_FILESYSTEMS=y -CONFIG_NFS_FS=y -CONFIG_NFS_V2=y -CONFIG_NFS_V3=y -CONFIG_NFS_V3_ACL=y -CONFIG_NFS_V4=y -# CONFIG_NFS_SWAP is not set -# CONFIG_NFS_V4_1 is not set -CONFIG_ROOT_NFS=y -# CONFIG_NFS_USE_LEGACY_DNS is not set -CONFIG_NFS_USE_KERNEL_DNS=y -# CONFIG_NFSD is not set -CONFIG_LOCKD=y -CONFIG_LOCKD_V4=y -CONFIG_NFS_ACL_SUPPORT=y -CONFIG_NFS_COMMON=y -CONFIG_SUNRPC=y -CONFIG_SUNRPC_GSS=y -# CONFIG_SUNRPC_DEBUG is not set -# CONFIG_CEPH_FS is not set -# CONFIG_CIFS is not set -# CONFIG_NCP_FS is not set -# CONFIG_CODA_FS is not set -# CONFIG_AFS_FS is not set -CONFIG_NLS=y -CONFIG_NLS_DEFAULT="cp437" -CONFIG_NLS_CODEPAGE_437=y -# CONFIG_NLS_CODEPAGE_737 is not set -# CONFIG_NLS_CODEPAGE_775 is not set -# CONFIG_NLS_CODEPAGE_850 is not set -# CONFIG_NLS_CODEPAGE_852 is not set -# CONFIG_NLS_CODEPAGE_855 is not set -# CONFIG_NLS_CODEPAGE_857 is not set -# CONFIG_NLS_CODEPAGE_860 is not set -# CONFIG_NLS_CODEPAGE_861 is not set -# CONFIG_NLS_CODEPAGE_862 is not set -# CONFIG_NLS_CODEPAGE_863 is not set -# CONFIG_NLS_CODEPAGE_864 is not set -# CONFIG_NLS_CODEPAGE_865 is not set -# CONFIG_NLS_CODEPAGE_866 is not set -# CONFIG_NLS_CODEPAGE_869 is not set -# CONFIG_NLS_CODEPAGE_936 is not set -# CONFIG_NLS_CODEPAGE_950 is not set -# CONFIG_NLS_CODEPAGE_932 is not set -# CONFIG_NLS_CODEPAGE_949 is not set -# CONFIG_NLS_CODEPAGE_874 is not set -# CONFIG_NLS_ISO8859_8 is not set -# CONFIG_NLS_CODEPAGE_1250 is not set -# CONFIG_NLS_CODEPAGE_1251 is not set -CONFIG_NLS_ASCII=y -CONFIG_NLS_ISO8859_1=y -# CONFIG_NLS_ISO8859_2 is not set -# CONFIG_NLS_ISO8859_3 is not set -# CONFIG_NLS_ISO8859_4 is not set -# CONFIG_NLS_ISO8859_5 is not set -# CONFIG_NLS_ISO8859_6 is not set -# CONFIG_NLS_ISO8859_7 is not set -# CONFIG_NLS_ISO8859_9 is not set -# CONFIG_NLS_ISO8859_13 is not set -# CONFIG_NLS_ISO8859_14 is not set -CONFIG_NLS_ISO8859_15=m -# CONFIG_NLS_KOI8_R is not set -# CONFIG_NLS_KOI8_U is not set -# CONFIG_NLS_MAC_ROMAN is not set -# CONFIG_NLS_MAC_CELTIC is not set -# CONFIG_NLS_MAC_CENTEURO is not set -# CONFIG_NLS_MAC_CROATIAN is not set -# CONFIG_NLS_MAC_CYRILLIC is not set -# CONFIG_NLS_MAC_GAELIC is not set -# CONFIG_NLS_MAC_GREEK is not set -# CONFIG_NLS_MAC_ICELAND is not set -# CONFIG_NLS_MAC_INUIT is not set -# CONFIG_NLS_MAC_ROMANIAN is not set -# CONFIG_NLS_MAC_TURKISH is not set -CONFIG_NLS_UTF8=y -# CONFIG_DLM is not set - -# -# Kernel hacking -# - -# -# printk and dmesg options -# -# CONFIG_PRINTK_TIME is not set -CONFIG_DEFAULT_MESSAGE_LOGLEVEL=4 -# CONFIG_BOOT_PRINTK_DELAY is not set -# CONFIG_DYNAMIC_DEBUG is not set - -# -# Compile-time checks and compiler options -# -# CONFIG_DEBUG_INFO is not set -CONFIG_ENABLE_WARN_DEPRECATED=y -CONFIG_ENABLE_MUST_CHECK=y -CONFIG_FRAME_WARN=1024 -# CONFIG_STRIP_ASM_SYMS is not set -# CONFIG_READABLE_ASM is not set -# CONFIG_UNUSED_SYMBOLS is not set -CONFIG_DEBUG_FS=y -# CONFIG_HEADERS_CHECK is not set -# CONFIG_DEBUG_SECTION_MISMATCH is not set -CONFIG_FRAME_POINTER=y -# CONFIG_DEBUG_FORCE_WEAK_PER_CPU is not set -CONFIG_MAGIC_SYSRQ=y -CONFIG_MAGIC_SYSRQ_DEFAULT_ENABLE=0x1 -CONFIG_DEBUG_KERNEL=y - -# -# Memory Debugging -# -# CONFIG_DEBUG_PAGEALLOC is not set -# CONFIG_DEBUG_OBJECTS is not set -# CONFIG_SLUB_STATS is not set -CONFIG_HAVE_DEBUG_KMEMLEAK=y -# CONFIG_DEBUG_KMEMLEAK is not set -# CONFIG_DEBUG_STACK_USAGE is not set -# CONFIG_DEBUG_VM is not set -# CONFIG_DEBUG_MEMORY_INIT is not set -# CONFIG_DEBUG_PER_CPU_MAPS is not set -# CONFIG_DEBUG_HIGHMEM is not set -# CONFIG_DEBUG_SHIRQ is not set - -# -# Debug Lockups and Hangs -# -# CONFIG_LOCKUP_DETECTOR is not set -# CONFIG_DETECT_HUNG_TASK is not set -# CONFIG_PANIC_ON_OOPS is not set -CONFIG_PANIC_ON_OOPS_VALUE=0 -CONFIG_PANIC_TIMEOUT=0 -# CONFIG_SCHED_DEBUG is not set -# CONFIG_SCHEDSTATS is not set -# CONFIG_TIMER_STATS is not set - -# -# Lock Debugging (spinlocks, mutexes, etc...) -# -# CONFIG_DEBUG_RT_MUTEXES is not set -# CONFIG_RT_MUTEX_TESTER is not set -CONFIG_DEBUG_SPINLOCK=y -CONFIG_DEBUG_MUTEXES=y -# CONFIG_DEBUG_WW_MUTEX_SLOWPATH is not set -CONFIG_DEBUG_LOCK_ALLOC=y -CONFIG_PROVE_LOCKING=y -CONFIG_LOCKDEP=y -# CONFIG_LOCK_STAT is not set -# CONFIG_DEBUG_LOCKDEP is not set -# CONFIG_DEBUG_ATOMIC_SLEEP is not set -# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set -# CONFIG_LOCK_TORTURE_TEST is not set -CONFIG_TRACE_IRQFLAGS=y -CONFIG_STACKTRACE=y -# CONFIG_DEBUG_KOBJECT is not set -# CONFIG_DEBUG_BUGVERBOSE is not set -# CONFIG_DEBUG_LIST is not set -# CONFIG_DEBUG_PI_LIST is not set -# CONFIG_DEBUG_SG is not set -# CONFIG_DEBUG_NOTIFIERS is not set -# CONFIG_DEBUG_CREDENTIALS is not set - -# -# RCU Debugging -# -# CONFIG_PROVE_RCU is not set -# CONFIG_SPARSE_RCU_POINTER is not set -# CONFIG_TORTURE_TEST is not set -# CONFIG_RCU_TORTURE_TEST is not set -CONFIG_RCU_CPU_STALL_TIMEOUT=21 -# CONFIG_RCU_CPU_STALL_INFO is not set -# CONFIG_RCU_TRACE is not set -# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set -# CONFIG_NOTIFIER_ERROR_INJECTION is not set -# CONFIG_FAULT_INJECTION is not set -CONFIG_HAVE_FUNCTION_TRACER=y -CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y -CONFIG_HAVE_DYNAMIC_FTRACE=y -CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y -CONFIG_HAVE_SYSCALL_TRACEPOINTS=y -CONFIG_HAVE_C_RECORDMCOUNT=y -CONFIG_TRACING_SUPPORT=y -# CONFIG_FTRACE is not set - -# -# Runtime Testing -# -# CONFIG_LKDTM is not set -# CONFIG_TEST_LIST_SORT is not set -# CONFIG_BACKTRACE_SELF_TEST is not set -# CONFIG_RBTREE_TEST is not set -# CONFIG_INTERVAL_TREE_TEST is not set -# CONFIG_PERCPU_TEST is not set -# CONFIG_ATOMIC64_SELFTEST is not set -# CONFIG_TEST_STRING_HELPERS is not set -# CONFIG_TEST_KSTRTOX is not set -# CONFIG_DMA_API_DEBUG is not set -# CONFIG_TEST_MODULE is not set -# CONFIG_TEST_USER_COPY is not set -# CONFIG_TEST_BPF is not set -# CONFIG_SAMPLES is not set -CONFIG_HAVE_ARCH_KGDB=y -# CONFIG_KGDB is not set -# CONFIG_ARM_PTDUMP is not set -# CONFIG_STRICT_DEVMEM is not set -# CONFIG_ARM_UNWIND is not set -# CONFIG_DEBUG_USER is not set -# CONFIG_DEBUG_LL is not set -CONFIG_DEBUG_IMX_UART_PORT=1 -CONFIG_DEBUG_VF_UART_PORT=1 -CONFIG_DEBUG_LL_INCLUDE="mach/debug-macro.S" -# CONFIG_DEBUG_UART_PL01X is not set -# CONFIG_DEBUG_UART_8250 is not set -CONFIG_UNCOMPRESS_INCLUDE="debug/uncompress.h" -# CONFIG_PID_IN_CONTEXTIDR is not set -# CONFIG_DEBUG_SET_MODULE_RONX is not set - -# -# Security options -# -CONFIG_KEYS=y -# CONFIG_PERSISTENT_KEYRINGS is not set -# CONFIG_BIG_KEYS is not set -# CONFIG_ENCRYPTED_KEYS is not set -# CONFIG_KEYS_DEBUG_PROC_KEYS is not set -# CONFIG_SECURITY_DMESG_RESTRICT is not set -# CONFIG_SECURITY is not set -CONFIG_SECURITYFS=y -CONFIG_DEFAULT_SECURITY_DAC=y -CONFIG_DEFAULT_SECURITY="" -CONFIG_CRYPTO=y - -# -# Crypto core or helper -# -CONFIG_CRYPTO_ALGAPI=y -CONFIG_CRYPTO_ALGAPI2=y -CONFIG_CRYPTO_AEAD=y -CONFIG_CRYPTO_AEAD2=y -CONFIG_CRYPTO_BLKCIPHER=y -CONFIG_CRYPTO_BLKCIPHER2=y -CONFIG_CRYPTO_HASH=y -CONFIG_CRYPTO_HASH2=y -CONFIG_CRYPTO_RNG=y -CONFIG_CRYPTO_RNG2=y -CONFIG_CRYPTO_PCOMP2=y -CONFIG_CRYPTO_MANAGER=y -CONFIG_CRYPTO_MANAGER2=y -# CONFIG_CRYPTO_USER is not set -CONFIG_CRYPTO_MANAGER_DISABLE_TESTS=y -# CONFIG_CRYPTO_GF128MUL is not set -# CONFIG_CRYPTO_NULL is not set -# CONFIG_CRYPTO_PCRYPT is not set -CONFIG_CRYPTO_WORKQUEUE=y -# CONFIG_CRYPTO_CRYPTD is not set -# CONFIG_CRYPTO_AUTHENC is not set -# CONFIG_CRYPTO_TEST is not set - -# -# Authenticated Encryption with Associated Data -# -CONFIG_CRYPTO_CCM=y -# CONFIG_CRYPTO_GCM is not set -CONFIG_CRYPTO_SEQIV=y - -# -# Block modes -# -# CONFIG_CRYPTO_CBC is not set -CONFIG_CRYPTO_CTR=y -# CONFIG_CRYPTO_CTS is not set -# CONFIG_CRYPTO_ECB is not set -# CONFIG_CRYPTO_LRW is not set -# CONFIG_CRYPTO_PCBC is not set -# CONFIG_CRYPTO_XTS is not set - -# -# Hash modes -# -# CONFIG_CRYPTO_CMAC is not set -# CONFIG_CRYPTO_HMAC is not set -# CONFIG_CRYPTO_XCBC is not set -# CONFIG_CRYPTO_VMAC is not set - -# -# Digest -# -CONFIG_CRYPTO_CRC32C=y -# CONFIG_CRYPTO_CRC32 is not set -CONFIG_CRYPTO_CRCT10DIF=y -# CONFIG_CRYPTO_GHASH is not set -# CONFIG_CRYPTO_MD4 is not set -# CONFIG_CRYPTO_MD5 is not set -# CONFIG_CRYPTO_MICHAEL_MIC is not set -# CONFIG_CRYPTO_RMD128 is not set -# CONFIG_CRYPTO_RMD160 is not set -# CONFIG_CRYPTO_RMD256 is not set -# CONFIG_CRYPTO_RMD320 is not set -# CONFIG_CRYPTO_SHA1 is not set -# CONFIG_CRYPTO_SHA1_ARM is not set -# CONFIG_CRYPTO_SHA256 is not set -# CONFIG_CRYPTO_SHA512 is not set -# CONFIG_CRYPTO_TGR192 is not set -# CONFIG_CRYPTO_WP512 is not set - -# -# Ciphers -# -CONFIG_CRYPTO_AES=y -# CONFIG_CRYPTO_AES_ARM is not set -# CONFIG_CRYPTO_ANUBIS is not set -CONFIG_CRYPTO_ARC4=y -# CONFIG_CRYPTO_BLOWFISH is not set -# CONFIG_CRYPTO_CAMELLIA is not set -# CONFIG_CRYPTO_CAST5 is not set -# CONFIG_CRYPTO_CAST6 is not set -# CONFIG_CRYPTO_DES is not set -# CONFIG_CRYPTO_FCRYPT is not set -# CONFIG_CRYPTO_KHAZAD is not set -# CONFIG_CRYPTO_SALSA20 is not set -# CONFIG_CRYPTO_SEED is not set -# CONFIG_CRYPTO_SERPENT is not set -# CONFIG_CRYPTO_TEA is not set -# CONFIG_CRYPTO_TWOFISH is not set - -# -# Compression -# -CONFIG_CRYPTO_DEFLATE=y -# CONFIG_CRYPTO_ZLIB is not set -CONFIG_CRYPTO_LZO=y -# CONFIG_CRYPTO_LZ4 is not set -# CONFIG_CRYPTO_LZ4HC is not set - -# -# Random Number Generation -# -# CONFIG_CRYPTO_ANSI_CPRNG is not set -# CONFIG_CRYPTO_USER_API_HASH is not set -# CONFIG_CRYPTO_USER_API_SKCIPHER is not set -# CONFIG_CRYPTO_HW is not set -# CONFIG_ASYMMETRIC_KEY_TYPE is not set -# CONFIG_BINARY_PRINTF is not set - -# -# Library routines -# -CONFIG_BITREVERSE=y -CONFIG_RATIONAL=y -CONFIG_GENERIC_STRNCPY_FROM_USER=y -CONFIG_GENERIC_STRNLEN_USER=y -CONFIG_GENERIC_NET_UTILS=y -CONFIG_GENERIC_PCI_IOMAP=y -CONFIG_GENERIC_IO=y -CONFIG_STMP_DEVICE=y -CONFIG_ARCH_USE_CMPXCHG_LOCKREF=y -CONFIG_CRC_CCITT=m -CONFIG_CRC16=y -CONFIG_CRC_T10DIF=y -CONFIG_CRC_ITU_T=m -CONFIG_CRC32=y -# CONFIG_CRC32_SELFTEST is not set -CONFIG_CRC32_SLICEBY8=y -# CONFIG_CRC32_SLICEBY4 is not set -# CONFIG_CRC32_SARWATE is not set -# CONFIG_CRC32_BIT is not set -CONFIG_CRC7=m -CONFIG_LIBCRC32C=m -# CONFIG_CRC8 is not set -# CONFIG_AUDIT_ARCH_COMPAT_GENERIC is not set -# CONFIG_RANDOM32_SELFTEST is not set -CONFIG_ZLIB_INFLATE=y -CONFIG_ZLIB_DEFLATE=y -CONFIG_LZO_COMPRESS=y -CONFIG_LZO_DECOMPRESS=y -# CONFIG_XZ_DEC is not set -# CONFIG_XZ_DEC_BCJ is not set -CONFIG_DECOMPRESS_GZIP=y -CONFIG_GENERIC_ALLOCATOR=y -CONFIG_ASSOCIATIVE_ARRAY=y -CONFIG_HAS_IOMEM=y -CONFIG_HAS_IOPORT_MAP=y -CONFIG_HAS_DMA=y -CONFIG_CPU_RMAP=y -CONFIG_DQL=y -CONFIG_NLATTR=y -CONFIG_GENERIC_ATOMIC64=y -CONFIG_ARCH_HAS_ATOMIC64_DEC_IF_POSITIVE=y -CONFIG_AVERAGE=y -# CONFIG_CORDIC is not set -# CONFIG_DDR is not set -CONFIG_LIBFDT=y -CONFIG_OID_REGISTRY=y -CONFIG_FONT_SUPPORT=y -CONFIG_FONTS=y -CONFIG_FONT_8x8=y -CONFIG_FONT_8x16=y -# CONFIG_FONT_6x11 is not set -# CONFIG_FONT_7x14 is not set -# CONFIG_FONT_PEARL_8x8 is not set -# CONFIG_FONT_ACORN_8x8 is not set -# CONFIG_FONT_MINI_4x6 is not set -# CONFIG_FONT_SUN8x16 is not set -# CONFIG_FONT_SUN12x22 is not set -# CONFIG_FONT_10x18 is not set -# CONFIG_VIRTUALIZATION is not set diff --git a/distribution/yocto-advanced/poky/meta-mini/recipes-kernel/linux-vanilla/linux-vanilla_3.16.1.bb b/distribution/yocto-advanced/poky/meta-mini/recipes-kernel/linux-vanilla/linux-vanilla_3.16.1.bb deleted file mode 100644 index 4f1e406..0000000 --- a/distribution/yocto-advanced/poky/meta-mini/recipes-kernel/linux-vanilla/linux-vanilla_3.16.1.bb +++ /dev/null @@ -1,31 +0,0 @@ -SECTION = "kernel" -DESCRIPTION = "Linux vanilla kernel" -LICENSE = "GPLv2" -LIC_FILES_CHKSUM = "file://COPYING;md5=d7810fab7487fb0aad327b76f1be7cd7" -KERNEL_IMAGETYPE ?= "uImage" - -inherit kernel - -require recipes-kernel/linux/linux-dtb.inc - -COMPATIBLE_MACHINE_imx6qsabrelite = "imx6qsabrelite" -COMPATIBLE_MACHINE_beaglebone-black = "beaglebone-black" - -KERNEL_DEVICETREE_imx6qsabrelite = "arch/arm/boot/dts/imx6q-sabrelite.dts" -KERNEL_DEVICETREE_beaglebone-black = "arch/arm/boot/dts/am335x-boneblack.dts" - -S = "${WORKDIR}/linux-${PV}" - -SRC_URI = "https://www.kernel.org/pub/linux/kernel/v3.x/linux-${PV}.tar.xz \ - file://defconfig \ -" - -SRC_URI[md5sum] = "e7a985a243b7941b6bc6240fcbc797fc" -SRC_URI[sha256sum] = "be37dda8ea090525661d64e5c7fc8580f313b7f9ba8592e32120f1332bc57d71" - -LINUX_VERSION_EXTENSION = "-linutronix" -KERNEL_EXTRA_ARGS += "LOADADDR=${UBOOT_ENTRYPOINT}" - -do_configure_prepend () { - cp '${WORKDIR}/defconfig' '${S}/.config' -} diff --git a/distribution/yocto-advanced/poky/meta-mini/recipes-kernel/recipes-bsp/mini-image/maxi-mini-image.bb b/distribution/yocto-advanced/poky/meta-mini/recipes-kernel/recipes-bsp/mini-image/maxi-mini-image.bb deleted file mode 100644 index bae7f2a..0000000 --- a/distribution/yocto-advanced/poky/meta-mini/recipes-kernel/recipes-bsp/mini-image/maxi-mini-image.bb +++ /dev/null @@ -1,3 +0,0 @@ -require /home/local/src/poky/meta-mini/recipes-bsp/mini-image/mini-image.bb -IMAGE_INSTALL = "eglibc hello hellocm autohello" -DESCRIPTION = "" diff --git a/distribution/yocto-advanced/poky/meta-mini/recipes-kernel/recipes-bsp/mini-image/mini-image.bb b/distribution/yocto-advanced/poky/meta-mini/recipes-kernel/recipes-bsp/mini-image/mini-image.bb deleted file mode 100644 index 7049969..0000000 --- a/distribution/yocto-advanced/poky/meta-mini/recipes-kernel/recipes-bsp/mini-image/mini-image.bb +++ /dev/null @@ -1,2 +0,0 @@ -IMAGE_LINGUAS = " " -inherit core-image diff --git a/distribution/yocto-advanced/poky/meta-mini/recipes-kernel/recipes-bsp/u-boot/u-boot-script_git.bb b/distribution/yocto-advanced/poky/meta-mini/recipes-kernel/recipes-bsp/u-boot/u-boot-script_git.bb deleted file mode 100644 index c0b88e1..0000000 --- a/distribution/yocto-advanced/poky/meta-mini/recipes-kernel/recipes-bsp/u-boot/u-boot-script_git.bb +++ /dev/null @@ -1,63 +0,0 @@ -LICENSE = "GPLv2+" -LIC_FILES_CHKSUM = "file://Licenses/README;md5=025bf9f768cbcb1a165dbe1a110babfb" -DEPENDS = "u-boot-mkimage-native" - -PV = "v2014.01+git${SRCPV}" - -SRCREV = "aed9475361820a65e37ed936c833322cbbc0f2b5" -SRCBRANCH = "v2014.04-20140419" -SRC_URI = "git://github.com/boundarydevices/u-boot-imx6.git;protocol=https;branch=${SRCBRANCH}" - -S = "${WORKDIR}/git" - -inherit deploy - -do_mkimage () { - - # allow deploy to use the ${MACHINE} name to simplify things - if [ ! -d board/boundary/${MACHINE} ]; then - mkdir board/boundary/${MACHINE} - fi - bootscript=board/boundary/nitrogen6x/6x_bootscript-yocto.txt; - if ! [ -f $bootscript ]; then - bootscript=board/boundary/nitrogen6x/6x_bootscript-yocto.txt; - fi - echo "bootscript == $bootscript" - - upgradescript=board/boundary/nitrogen6x/6x_upgrade.txt; - if ! [ -f $upgradescript ]; then - upgradescript=board/boundary/nitrogen6x/6x_upgrade.txt; - fi - - uboot-mkimage -A arm -O linux -T script -C none -a 0 -e 0 \ - -n "boot script" -d $bootscript \ - board/boundary/${MACHINE}/6x_bootscript - - uboot-mkimage -A arm -O linux -T script -C none -a 0 -e 0 \ - -n "upgrade script" -d $upgradescript \ - board/boundary/${MACHINE}/6x_upgrade -} - -addtask mkimage after do_compile before do_install - -do_deploy () { - install -d ${DEPLOYDIR} - install ${S}/board/boundary/${MACHINE}/6x_bootscript \ - ${DEPLOYDIR}/6x_bootscript-${MACHINE}-${PV}-${PR} - install ${S}/board/boundary/${MACHINE}/6x_upgrade \ - ${DEPLOYDIR}/6x_upgrade-${MACHINE}-${PV}-${PR} - - cd ${DEPLOYDIR} - rm -f 6x_bootscript-${MACHINE} 6x_upgrade-${MACHINE} - ln -sf 6x_bootscript-${MACHINE}-${PV}-${PR} 6x_bootscript-${MACHINE} - ln -sf 6x_upgrade-${MACHINE}-${PV}-${PR} 6x_upgrade-${MACHINE} -} - -addtask deploy after do_install before do_build - -do_compile[noexec] = "1" -do_install[noexec] = "1" -do_populate_sysroot[noexec] = "1" - -PACKAGE_ARCH = "${MACHINE_ARCH}" -COMPATIBLE_MACHINE = "(imx6qsabrelite)" diff --git a/distribution/yocto-advanced/poky/meta-mini/recipes-kernel/recipes-core/eglibc/eglibc-locale_2.19.bbappend b/distribution/yocto-advanced/poky/meta-mini/recipes-kernel/recipes-core/eglibc/eglibc-locale_2.19.bbappend deleted file mode 100644 index 51f69e5..0000000 --- a/distribution/yocto-advanced/poky/meta-mini/recipes-kernel/recipes-core/eglibc/eglibc-locale_2.19.bbappend +++ /dev/null @@ -1,2 +0,0 @@ -do_package_qa () { -} diff --git a/distribution/yocto-advanced/poky/meta-mini/recipes-kernel/recipes-kernel/linux-vanilla/files/beaglebone-black/omap2plus_defconfig b/distribution/yocto-advanced/poky/meta-mini/recipes-kernel/recipes-kernel/linux-vanilla/files/beaglebone-black/omap2plus_defconfig deleted file mode 100644 index 536a137..0000000 --- a/distribution/yocto-advanced/poky/meta-mini/recipes-kernel/recipes-kernel/linux-vanilla/files/beaglebone-black/omap2plus_defconfig +++ /dev/null @@ -1,308 +0,0 @@ -CONFIG_SYSVIPC=y -CONFIG_POSIX_MQUEUE=y -CONFIG_NO_HZ=y -CONFIG_HIGH_RES_TIMERS=y -CONFIG_BSD_PROCESS_ACCT=y -CONFIG_IKCONFIG=y -CONFIG_IKCONFIG_PROC=y -CONFIG_LOG_BUF_SHIFT=16 -CONFIG_BLK_DEV_INITRD=y -CONFIG_EXPERT=y -CONFIG_SLAB=y -CONFIG_PROFILING=y -CONFIG_OPROFILE=y -CONFIG_KPROBES=y -CONFIG_MODULES=y -CONFIG_MODULE_FORCE_LOAD=y -CONFIG_MODULE_UNLOAD=y -CONFIG_MODULE_FORCE_UNLOAD=y -CONFIG_MODVERSIONS=y -CONFIG_MODULE_SRCVERSION_ALL=y -# CONFIG_BLK_DEV_BSG is not set -CONFIG_PARTITION_ADVANCED=y -CONFIG_ARCH_MULTI_V6=y -CONFIG_POWER_AVS_OMAP=y -CONFIG_POWER_AVS_OMAP_CLASS3=y -CONFIG_OMAP_RESET_CLOCKS=y -CONFIG_OMAP_MUX_DEBUG=y -CONFIG_ARCH_OMAP2=y -CONFIG_ARCH_OMAP3=y -CONFIG_ARCH_OMAP4=y -CONFIG_SOC_OMAP5=y -CONFIG_SOC_AM33XX=y -CONFIG_SOC_AM43XX=y -CONFIG_SOC_DRA7XX=y -CONFIG_CACHE_L2X0=y -CONFIG_ARM_THUMBEE=y -CONFIG_ARM_ERRATA_411920=y -CONFIG_SMP=y -CONFIG_NR_CPUS=2 -CONFIG_CMA=y -CONFIG_ZBOOT_ROM_TEXT=0x0 -CONFIG_ZBOOT_ROM_BSS=0x0 -CONFIG_ARM_APPENDED_DTB=y -CONFIG_ARM_ATAG_DTB_COMPAT=y -CONFIG_CMDLINE="root=/dev/mmcblk0p2 rootwait console=ttyO2,115200" -CONFIG_KEXEC=y -CONFIG_FPE_NWFPE=y -CONFIG_CPU_IDLE=y -CONFIG_BINFMT_MISC=y -CONFIG_PM_DEBUG=y -CONFIG_NET=y -CONFIG_PACKET=y -CONFIG_UNIX=y -CONFIG_XFRM_USER=y -CONFIG_NET_KEY=y -CONFIG_NET_KEY_MIGRATE=y -CONFIG_INET=y -CONFIG_IP_MULTICAST=y -CONFIG_IP_PNP=y -CONFIG_IP_PNP_DHCP=y -CONFIG_IP_PNP_BOOTP=y -CONFIG_IP_PNP_RARP=y -# CONFIG_INET_LRO is not set -# CONFIG_IPV6 is not set -CONFIG_NETFILTER=y -CONFIG_CAN=m -CONFIG_CAN_C_CAN=m -CONFIG_CAN_C_CAN_PLATFORM=m -CONFIG_BT=m -CONFIG_BT_HCIUART=m -CONFIG_BT_HCIUART_H4=y -CONFIG_BT_HCIUART_BCSP=y -CONFIG_BT_HCIUART_LL=y -CONFIG_BT_HCIBCM203X=m -CONFIG_BT_HCIBPA10X=m -CONFIG_CFG80211=m -CONFIG_MAC80211=m -CONFIG_MAC80211_RC_PID=y -CONFIG_MAC80211_RC_DEFAULT_PID=y -CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" -CONFIG_DEVTMPFS=y -CONFIG_DEVTMPFS_MOUNT=y -CONFIG_DMA_CMA=y -CONFIG_OMAP_OCP2SCP=y -CONFIG_CONNECTOR=y -CONFIG_MTD=y -CONFIG_MTD_CMDLINE_PARTS=y -CONFIG_MTD_BLOCK=y -CONFIG_MTD_OOPS=y -CONFIG_MTD_CFI=y -CONFIG_MTD_CFI_INTELEXT=y -CONFIG_MTD_NAND=y -CONFIG_MTD_NAND_OMAP2=y -CONFIG_MTD_ONENAND=y -CONFIG_MTD_ONENAND_VERIFY_WRITE=y -CONFIG_MTD_ONENAND_OMAP2=y -CONFIG_MTD_UBI=y -CONFIG_BLK_DEV_LOOP=y -CONFIG_BLK_DEV_RAM=y -CONFIG_BLK_DEV_RAM_SIZE=16384 -CONFIG_SENSORS_TSL2550=m -CONFIG_BMP085_I2C=m -CONFIG_SENSORS_LIS3_I2C=m -CONFIG_SCSI=y -CONFIG_BLK_DEV_SD=y -CONFIG_SCSI_MULTI_LUN=y -CONFIG_SCSI_SCAN_ASYNC=y -CONFIG_MD=y -CONFIG_NETDEVICES=y -CONFIG_KS8851=y -CONFIG_KS8851_MLL=y -CONFIG_SMC91X=y -CONFIG_SMSC911X=y -CONFIG_TI_CPSW=y -CONFIG_AT803X_PHY=y -CONFIG_SMSC_PHY=y -CONFIG_USB_USBNET=y -CONFIG_USB_NET_SMSC95XX=y -CONFIG_USB_ALI_M5632=y -CONFIG_USB_AN2720=y -CONFIG_USB_EPSON2888=y -CONFIG_USB_KC2190=y -CONFIG_LIBERTAS=m -CONFIG_LIBERTAS_USB=m -CONFIG_LIBERTAS_SDIO=m -CONFIG_LIBERTAS_DEBUG=y -CONFIG_WL_TI=y -CONFIG_WL12XX=m -CONFIG_WL18XX=m -CONFIG_WLCORE_SPI=m -CONFIG_WLCORE_SDIO=m -CONFIG_MWIFIEX=m -CONFIG_MWIFIEX_SDIO=m -CONFIG_MWIFIEX_USB=m -CONFIG_INPUT_JOYDEV=y -CONFIG_INPUT_EVDEV=y -CONFIG_KEYBOARD_GPIO=y -CONFIG_KEYBOARD_MATRIX=m -CONFIG_KEYBOARD_TWL4030=y -CONFIG_INPUT_TOUCHSCREEN=y -CONFIG_TOUCHSCREEN_ADS7846=y -CONFIG_INPUT_MISC=y -CONFIG_INPUT_TWL4030_PWRBUTTON=y -# CONFIG_LEGACY_PTYS is not set -CONFIG_SERIAL_8250=y -CONFIG_SERIAL_8250_CONSOLE=y -CONFIG_SERIAL_8250_NR_UARTS=32 -CONFIG_SERIAL_8250_EXTENDED=y -CONFIG_SERIAL_8250_MANY_PORTS=y -CONFIG_SERIAL_8250_SHARE_IRQ=y -CONFIG_SERIAL_8250_DETECT_IRQ=y -CONFIG_SERIAL_8250_RSA=y -CONFIG_SERIAL_OF_PLATFORM=y -CONFIG_SERIAL_OMAP=y -CONFIG_SERIAL_OMAP_CONSOLE=y -CONFIG_HW_RANDOM=y -CONFIG_I2C_CHARDEV=y -CONFIG_SPI=y -CONFIG_SPI_OMAP24XX=y -CONFIG_PINCTRL_SINGLE=y -CONFIG_DEBUG_GPIO=y -CONFIG_GPIO_SYSFS=y -CONFIG_GPIO_TWL4030=y -CONFIG_W1=y -CONFIG_POWER_SUPPLY=y -CONFIG_POWER_AVS=y -CONFIG_SENSORS_LM75=m -CONFIG_THERMAL=y -CONFIG_THERMAL_GOV_FAIR_SHARE=y -CONFIG_THERMAL_GOV_USER_SPACE=y -CONFIG_CPU_THERMAL=y -CONFIG_TI_SOC_THERMAL=y -CONFIG_TI_THERMAL=y -CONFIG_OMAP4_THERMAL=y -CONFIG_OMAP5_THERMAL=y -CONFIG_DRA752_THERMAL=y -CONFIG_WATCHDOG=y -CONFIG_OMAP_WATCHDOG=y -CONFIG_TWL4030_WATCHDOG=y -CONFIG_MFD_SYSCON=y -CONFIG_MFD_PALMAS=y -CONFIG_MFD_TPS65217=y -CONFIG_MFD_TPS65910=y -CONFIG_TWL6040_CORE=y -CONFIG_REGULATOR_FIXED_VOLTAGE=y -CONFIG_REGULATOR_PALMAS=y -CONFIG_REGULATOR_TI_ABB=y -CONFIG_REGULATOR_TPS65023=y -CONFIG_REGULATOR_TPS6507X=y -CONFIG_REGULATOR_TPS65217=y -CONFIG_REGULATOR_TPS65910=y -CONFIG_REGULATOR_TWL4030=y -CONFIG_REGULATOR_PBIAS=y -CONFIG_FB=y -CONFIG_FIRMWARE_EDID=y -CONFIG_FB_MODE_HELPERS=y -CONFIG_FB_TILEBLITTING=y -CONFIG_OMAP2_DSS=m -CONFIG_OMAP2_DSS_SDI=y -CONFIG_OMAP2_DSS_DSI=y -CONFIG_FB_OMAP2=m -CONFIG_DISPLAY_ENCODER_TFP410=m -CONFIG_DISPLAY_ENCODER_TPD12S015=m -CONFIG_DISPLAY_CONNECTOR_DVI=m -CONFIG_DISPLAY_CONNECTOR_HDMI=m -CONFIG_DISPLAY_PANEL_DPI=m -CONFIG_BACKLIGHT_LCD_SUPPORT=y -CONFIG_LCD_CLASS_DEVICE=y -CONFIG_LCD_PLATFORM=y -CONFIG_FRAMEBUFFER_CONSOLE=y -CONFIG_FRAMEBUFFER_CONSOLE_ROTATION=y -CONFIG_LOGO=y -CONFIG_SOUND=m -CONFIG_SND=m -CONFIG_SND_MIXER_OSS=m -CONFIG_SND_PCM_OSS=m -CONFIG_SND_VERBOSE_PRINTK=y -CONFIG_SND_DEBUG=y -CONFIG_SND_USB_AUDIO=m -CONFIG_SND_SOC=m -CONFIG_SND_OMAP_SOC=m -CONFIG_SND_AM33XX_SOC_EVM=m -CONFIG_SND_DAVINCI_SOC=m -CONFIG_SND_OMAP_SOC_OMAP_TWL4030=m -CONFIG_SND_OMAP_SOC_OMAP_ABE_TWL6040=m -CONFIG_SND_OMAP_SOC_OMAP3_PANDORA=m -CONFIG_USB=y -CONFIG_USB_ANNOUNCE_NEW_DEVICES=y -CONFIG_USB_MON=y -CONFIG_USB_WDM=y -CONFIG_USB_STORAGE=y -CONFIG_USB_DWC3=m -CONFIG_USB_TEST=y -CONFIG_NOP_USB_XCEIV=y -CONFIG_OMAP_USB2=y -CONFIG_TI_PIPE3=y -CONFIG_AM335X_PHY_USB=y -CONFIG_USB_GADGET=y -CONFIG_USB_GADGET_DEBUG=y -CONFIG_USB_GADGET_DEBUG_FILES=y -CONFIG_USB_GADGET_DEBUG_FS=y -CONFIG_USB_ZERO=m -CONFIG_MMC=y -CONFIG_MMC_UNSAFE_RESUME=y -CONFIG_SDIO_UART=y -CONFIG_MMC_OMAP=y -CONFIG_MMC_OMAP_HS=y -CONFIG_NEW_LEDS=y -CONFIG_LEDS_CLASS=y -CONFIG_LEDS_GPIO=y -CONFIG_LEDS_TRIGGERS=y -CONFIG_LEDS_TRIGGER_TIMER=y -CONFIG_LEDS_TRIGGER_ONESHOT=y -CONFIG_LEDS_TRIGGER_HEARTBEAT=y -CONFIG_LEDS_TRIGGER_BACKLIGHT=y -CONFIG_LEDS_TRIGGER_CPU=y -CONFIG_LEDS_TRIGGER_GPIO=y -CONFIG_LEDS_TRIGGER_DEFAULT_ON=y -CONFIG_RTC_CLASS=y -CONFIG_RTC_DRV_TWL92330=y -CONFIG_RTC_DRV_TWL4030=y -CONFIG_RTC_DRV_OMAP=y -CONFIG_DMADEVICES=y -CONFIG_TI_EDMA=y -CONFIG_DMA_OMAP=y -CONFIG_EXTCON=y -CONFIG_EXTCON_PALMAS=y -CONFIG_EXT2_FS=y -CONFIG_EXT3_FS=y -# CONFIG_EXT3_FS_XATTR is not set -CONFIG_EXT4_FS=y -CONFIG_QUOTA=y -CONFIG_QFMT_V2=y -CONFIG_MSDOS_FS=y -CONFIG_VFAT_FS=y -CONFIG_TMPFS=y -CONFIG_JFFS2_FS=y -CONFIG_JFFS2_SUMMARY=y -CONFIG_JFFS2_FS_XATTR=y -CONFIG_JFFS2_COMPRESSION_OPTIONS=y -CONFIG_JFFS2_LZO=y -CONFIG_JFFS2_RUBIN=y -CONFIG_UBIFS_FS=y -CONFIG_CRAMFS=y -CONFIG_NFS_FS=y -CONFIG_NFS_V3_ACL=y -CONFIG_NFS_V4=y -CONFIG_ROOT_NFS=y -CONFIG_NLS_CODEPAGE_437=y -CONFIG_NLS_ISO8859_1=y -CONFIG_PRINTK_TIME=y -CONFIG_DEBUG_INFO=y -CONFIG_MAGIC_SYSRQ=y -CONFIG_SCHEDSTATS=y -CONFIG_TIMER_STATS=y -CONFIG_PROVE_LOCKING=y -# CONFIG_DEBUG_BUGVERBOSE is not set -CONFIG_SECURITY=y -CONFIG_CRYPTO_MICHAEL_MIC=y -# CONFIG_CRYPTO_ANSI_CPRNG is not set -CONFIG_CRC_CCITT=y -CONFIG_CRC_T10DIF=y -CONFIG_CRC_ITU_T=y -CONFIG_CRC7=y -CONFIG_LIBCRC32C=y -CONFIG_FONTS=y -CONFIG_FONT_8x8=y -CONFIG_FONT_8x16=y diff --git a/distribution/yocto-advanced/poky/meta-mini/recipes-kernel/recipes-kernel/linux-vanilla/files/imx6qsabrelite/defconfig b/distribution/yocto-advanced/poky/meta-mini/recipes-kernel/recipes-kernel/linux-vanilla/files/imx6qsabrelite/defconfig deleted file mode 100644 index d4b216a..0000000 --- a/distribution/yocto-advanced/poky/meta-mini/recipes-kernel/recipes-kernel/linux-vanilla/files/imx6qsabrelite/defconfig +++ /dev/null @@ -1,3721 +0,0 @@ -# -# Automatically generated file; DO NOT EDIT. -# Linux/arm 3.16.1 Kernel Configuration -# -CONFIG_ARM=y -CONFIG_ARM_HAS_SG_CHAIN=y -CONFIG_MIGHT_HAVE_PCI=y -CONFIG_SYS_SUPPORTS_APM_EMULATION=y -CONFIG_HAVE_PROC_CPU=y -CONFIG_STACKTRACE_SUPPORT=y -CONFIG_LOCKDEP_SUPPORT=y -CONFIG_TRACE_IRQFLAGS_SUPPORT=y -CONFIG_RWSEM_XCHGADD_ALGORITHM=y -CONFIG_GENERIC_HWEIGHT=y -CONFIG_GENERIC_CALIBRATE_DELAY=y -CONFIG_NEED_DMA_MAP_STATE=y -CONFIG_ARCH_SUPPORTS_UPROBES=y -CONFIG_FIQ=y -CONFIG_VECTORS_BASE=0xffff0000 -CONFIG_ARM_PATCH_PHYS_VIRT=y -CONFIG_GENERIC_BUG=y -CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" -CONFIG_IRQ_WORK=y -CONFIG_BUILDTIME_EXTABLE_SORT=y - -# -# General setup -# -CONFIG_INIT_ENV_ARG_LIMIT=32 -CONFIG_CROSS_COMPILE="" -# CONFIG_COMPILE_TEST is not set -CONFIG_LOCALVERSION="" -CONFIG_LOCALVERSION_AUTO=y -CONFIG_HAVE_KERNEL_GZIP=y -CONFIG_HAVE_KERNEL_LZMA=y -CONFIG_HAVE_KERNEL_XZ=y -CONFIG_HAVE_KERNEL_LZO=y -CONFIG_HAVE_KERNEL_LZ4=y -# CONFIG_KERNEL_GZIP is not set -# CONFIG_KERNEL_LZMA is not set -# CONFIG_KERNEL_XZ is not set -CONFIG_KERNEL_LZO=y -# CONFIG_KERNEL_LZ4 is not set -CONFIG_DEFAULT_HOSTNAME="(none)" -CONFIG_SWAP=y -CONFIG_SYSVIPC=y -CONFIG_SYSVIPC_SYSCTL=y -# CONFIG_POSIX_MQUEUE is not set -CONFIG_CROSS_MEMORY_ATTACH=y -# CONFIG_FHANDLE is not set -CONFIG_USELIB=y -# CONFIG_AUDIT is not set -CONFIG_HAVE_ARCH_AUDITSYSCALL=y - -# -# IRQ subsystem -# -CONFIG_GENERIC_IRQ_PROBE=y -CONFIG_GENERIC_IRQ_SHOW=y -CONFIG_HARDIRQS_SW_RESEND=y -CONFIG_GENERIC_IRQ_CHIP=y -CONFIG_IRQ_DOMAIN=y -# CONFIG_IRQ_DOMAIN_DEBUG is not set -CONFIG_IRQ_FORCED_THREADING=y -CONFIG_SPARSE_IRQ=y -CONFIG_KTIME_SCALAR=y -CONFIG_GENERIC_CLOCKEVENTS=y -CONFIG_GENERIC_CLOCKEVENTS_BUILD=y -CONFIG_ARCH_HAS_TICK_BROADCAST=y -CONFIG_GENERIC_CLOCKEVENTS_BROADCAST=y - -# -# Timers subsystem -# -CONFIG_TICK_ONESHOT=y -CONFIG_NO_HZ_COMMON=y -# CONFIG_HZ_PERIODIC is not set -CONFIG_NO_HZ_IDLE=y -# CONFIG_NO_HZ_FULL is not set -CONFIG_NO_HZ=y -CONFIG_HIGH_RES_TIMERS=y - -# -# CPU/Task time and stats accounting -# -CONFIG_TICK_CPU_ACCOUNTING=y -# CONFIG_VIRT_CPU_ACCOUNTING_GEN is not set -# CONFIG_IRQ_TIME_ACCOUNTING is not set -# CONFIG_BSD_PROCESS_ACCT is not set -# CONFIG_TASKSTATS is not set - -# -# RCU Subsystem -# -CONFIG_TREE_RCU=y -# CONFIG_PREEMPT_RCU is not set -CONFIG_RCU_STALL_COMMON=y -# CONFIG_RCU_USER_QS is not set -CONFIG_RCU_FANOUT=32 -CONFIG_RCU_FANOUT_LEAF=16 -# CONFIG_RCU_FANOUT_EXACT is not set -# CONFIG_RCU_FAST_NO_HZ is not set -# CONFIG_TREE_RCU_TRACE is not set -# CONFIG_RCU_NOCB_CPU is not set -# CONFIG_IKCONFIG is not set -CONFIG_LOG_BUF_SHIFT=18 -CONFIG_GENERIC_SCHED_CLOCK=y -CONFIG_CGROUPS=y -# CONFIG_CGROUP_DEBUG is not set -# CONFIG_CGROUP_FREEZER is not set -# CONFIG_CGROUP_DEVICE is not set -# CONFIG_CPUSETS is not set -# CONFIG_CGROUP_CPUACCT is not set -# CONFIG_RESOURCE_COUNTERS is not set -# CONFIG_CGROUP_PERF is not set -# CONFIG_CGROUP_SCHED is not set -# CONFIG_BLK_CGROUP is not set -# CONFIG_CHECKPOINT_RESTORE is not set -# CONFIG_NAMESPACES is not set -# CONFIG_SCHED_AUTOGROUP is not set -# CONFIG_SYSFS_DEPRECATED is not set -CONFIG_RELAY=y -CONFIG_BLK_DEV_INITRD=y -CONFIG_INITRAMFS_SOURCE="" -CONFIG_RD_GZIP=y -# CONFIG_RD_BZIP2 is not set -# CONFIG_RD_LZMA is not set -# CONFIG_RD_XZ is not set -# CONFIG_RD_LZO is not set -# CONFIG_RD_LZ4 is not set -# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set -CONFIG_SYSCTL=y -CONFIG_ANON_INODES=y -CONFIG_HAVE_UID16=y -CONFIG_EXPERT=y -CONFIG_UID16=y -# CONFIG_SGETMASK_SYSCALL is not set -CONFIG_SYSFS_SYSCALL=y -# CONFIG_SYSCTL_SYSCALL is not set -CONFIG_KALLSYMS=y -CONFIG_KALLSYMS_ALL=y -CONFIG_PRINTK=y -CONFIG_BUG=y -CONFIG_ELF_CORE=y -CONFIG_BASE_FULL=y -CONFIG_FUTEX=y -CONFIG_EPOLL=y -CONFIG_SIGNALFD=y -CONFIG_TIMERFD=y -CONFIG_EVENTFD=y -CONFIG_SHMEM=y -CONFIG_AIO=y -CONFIG_PCI_QUIRKS=y -# CONFIG_EMBEDDED is not set -CONFIG_HAVE_PERF_EVENTS=y -CONFIG_PERF_USE_VMALLOC=y - -# -# Kernel Performance Events And Counters -# -CONFIG_PERF_EVENTS=y -# CONFIG_DEBUG_PERF_USE_VMALLOC is not set -CONFIG_VM_EVENT_COUNTERS=y -# CONFIG_SLUB_DEBUG is not set -# CONFIG_COMPAT_BRK is not set -# CONFIG_SLAB is not set -CONFIG_SLUB=y -# CONFIG_SLOB is not set -CONFIG_SLUB_CPU_PARTIAL=y -# CONFIG_SYSTEM_TRUSTED_KEYRING is not set -# CONFIG_PROFILING is not set -CONFIG_HAVE_OPROFILE=y -# CONFIG_KPROBES is not set -# CONFIG_JUMP_LABEL is not set -# CONFIG_UPROBES is not set -# CONFIG_HAVE_64BIT_ALIGNED_ACCESS is not set -CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y -CONFIG_ARCH_USE_BUILTIN_BSWAP=y -CONFIG_HAVE_KPROBES=y -CONFIG_HAVE_KRETPROBES=y -CONFIG_HAVE_ARCH_TRACEHOOK=y -CONFIG_HAVE_DMA_ATTRS=y -CONFIG_HAVE_DMA_CONTIGUOUS=y -CONFIG_GENERIC_SMP_IDLE_THREAD=y -CONFIG_GENERIC_IDLE_POLL_SETUP=y -CONFIG_HAVE_REGS_AND_STACK_ACCESS_API=y -CONFIG_HAVE_CLK=y -CONFIG_HAVE_DMA_API_DEBUG=y -CONFIG_HAVE_HW_BREAKPOINT=y -CONFIG_HAVE_PERF_REGS=y -CONFIG_HAVE_PERF_USER_STACK_DUMP=y -CONFIG_HAVE_ARCH_JUMP_LABEL=y -CONFIG_ARCH_WANT_IPC_PARSE_VERSION=y -CONFIG_HAVE_ARCH_SECCOMP_FILTER=y -CONFIG_HAVE_CC_STACKPROTECTOR=y -# CONFIG_CC_STACKPROTECTOR is not set -CONFIG_CC_STACKPROTECTOR_NONE=y -# CONFIG_CC_STACKPROTECTOR_REGULAR is not set -# CONFIG_CC_STACKPROTECTOR_STRONG is not set -CONFIG_HAVE_CONTEXT_TRACKING=y -CONFIG_HAVE_VIRT_CPU_ACCOUNTING_GEN=y -CONFIG_HAVE_IRQ_TIME_ACCOUNTING=y -CONFIG_MODULES_USE_ELF_REL=y -CONFIG_CLONE_BACKWARDS=y -CONFIG_OLD_SIGSUSPEND3=y -CONFIG_OLD_SIGACTION=y - -# -# GCOV-based kernel profiling -# -# CONFIG_GCOV_KERNEL is not set -CONFIG_HAVE_GENERIC_DMA_COHERENT=y -CONFIG_RT_MUTEXES=y -CONFIG_BASE_SMALL=0 -CONFIG_MODULES=y -# CONFIG_MODULE_FORCE_LOAD is not set -CONFIG_MODULE_UNLOAD=y -# CONFIG_MODULE_FORCE_UNLOAD is not set -CONFIG_MODVERSIONS=y -CONFIG_MODULE_SRCVERSION_ALL=y -# CONFIG_MODULE_SIG is not set -CONFIG_STOP_MACHINE=y -CONFIG_BLOCK=y -CONFIG_LBDAF=y -# CONFIG_BLK_DEV_BSG is not set -# CONFIG_BLK_DEV_BSGLIB is not set -# CONFIG_BLK_DEV_INTEGRITY is not set -# CONFIG_BLK_CMDLINE_PARSER is not set - -# -# Partition Types -# -# CONFIG_PARTITION_ADVANCED is not set -CONFIG_MSDOS_PARTITION=y -CONFIG_EFI_PARTITION=y - -# -# IO Schedulers -# -CONFIG_IOSCHED_NOOP=y -CONFIG_IOSCHED_DEADLINE=y -CONFIG_IOSCHED_CFQ=y -# CONFIG_DEFAULT_DEADLINE is not set -CONFIG_DEFAULT_CFQ=y -# CONFIG_DEFAULT_NOOP is not set -CONFIG_DEFAULT_IOSCHED="cfq" -CONFIG_UNINLINE_SPIN_UNLOCK=y -CONFIG_ARCH_SUPPORTS_ATOMIC_RMW=y -CONFIG_RWSEM_SPIN_ON_OWNER=y -CONFIG_FREEZER=y - -# -# System Type -# -CONFIG_MMU=y -CONFIG_ARCH_MULTIPLATFORM=y -# CONFIG_ARCH_INTEGRATOR is not set -# CONFIG_ARCH_REALVIEW is not set -# CONFIG_ARCH_VERSATILE is not set -# CONFIG_ARCH_AT91 is not set -# CONFIG_ARCH_CLPS711X is not set -# CONFIG_ARCH_GEMINI is not set -# CONFIG_ARCH_EBSA110 is not set -# CONFIG_ARCH_EP93XX is not set -# CONFIG_ARCH_FOOTBRIDGE is not set -# CONFIG_ARCH_NETX is not set -# CONFIG_ARCH_IOP13XX is not set -# CONFIG_ARCH_IOP32X is not set -# CONFIG_ARCH_IOP33X is not set -# CONFIG_ARCH_IXP4XX is not set -# CONFIG_ARCH_DOVE is not set -# CONFIG_ARCH_KIRKWOOD is not set -# CONFIG_ARCH_MV78XX0 is not set -# CONFIG_ARCH_ORION5X is not set -# CONFIG_ARCH_MMP is not set -# CONFIG_ARCH_KS8695 is not set -# CONFIG_ARCH_W90X900 is not set -# CONFIG_ARCH_LPC32XX is not set -# CONFIG_ARCH_PXA is not set -# CONFIG_ARCH_MSM is not set -# CONFIG_ARCH_SHMOBILE_LEGACY is not set -# CONFIG_ARCH_RPC is not set -# CONFIG_ARCH_SA1100 is not set -# CONFIG_ARCH_S3C24XX is not set -# CONFIG_ARCH_S3C64XX is not set -# CONFIG_ARCH_S5P64X0 is not set -# CONFIG_ARCH_S5PC100 is not set -# CONFIG_ARCH_S5PV210 is not set -# CONFIG_ARCH_DAVINCI is not set -# CONFIG_ARCH_OMAP1 is not set - -# -# Multiple platform selection -# - -# -# CPU Core family selection -# -CONFIG_ARCH_MULTI_V6=y -CONFIG_ARCH_MULTI_V7=y -CONFIG_ARCH_MULTI_V6_V7=y -# CONFIG_ARCH_MULTI_CPU_AUTO is not set -# CONFIG_ARCH_VIRT is not set -# CONFIG_ARCH_MVEBU is not set -# CONFIG_ARCH_BCM is not set -# CONFIG_ARCH_BERLIN is not set -# CONFIG_ARCH_CNS3XXX is not set -# CONFIG_ARCH_HIGHBANK is not set -# CONFIG_ARCH_HI3xxx is not set -# CONFIG_ARCH_KEYSTONE is not set -CONFIG_ARCH_MXC=y -CONFIG_MXC_TZIC=y -CONFIG_MXC_AVIC=y -CONFIG_MXC_DEBUG_BOARD=y -CONFIG_HAVE_EPIT=y -# CONFIG_MXC_USE_EPIT is not set -CONFIG_ARCH_HAS_RNGA=y -CONFIG_HAVE_IMX_ANATOP=y -CONFIG_HAVE_IMX_GPC=y -CONFIG_HAVE_IMX_MMDC=y -CONFIG_HAVE_IMX_SRC=y -CONFIG_ARCH_MXC_IOMUX_V3=y -CONFIG_SOC_IMX31=y -CONFIG_SOC_IMX35=y -CONFIG_SOC_IMX5=y -CONFIG_SOC_IMX51=y - -# -# MX31 platforms: -# -CONFIG_MACH_MX31ADS=y -CONFIG_MACH_MX31LILLY=y -CONFIG_MACH_MX31LITE=y -CONFIG_MACH_PCM037=y -CONFIG_MACH_PCM037_EET=y -CONFIG_MACH_MX31_3DS=y -# CONFIG_MACH_MX31_3DS_MXC_NAND_USE_BBT is not set -CONFIG_MACH_MX31MOBOARD=y -CONFIG_MACH_QONG=y -CONFIG_MACH_ARMADILLO5X0=y -CONFIG_MACH_KZM_ARM11_01=y -CONFIG_MACH_BUG=y -CONFIG_MACH_IMX31_DT=y - -# -# MX35 platforms: -# -CONFIG_MACH_IMX35_DT=y -CONFIG_MACH_PCM043=y -CONFIG_MACH_MX35_3DS=y -# CONFIG_MACH_EUKREA_CPUIMX35SD is not set -CONFIG_MACH_VPR200=y - -# -# Device tree only -# -CONFIG_SOC_IMX50=y -CONFIG_MACH_IMX51_DT=y -CONFIG_SOC_IMX53=y -CONFIG_SOC_IMX6=y -CONFIG_SOC_IMX6Q=y -CONFIG_SOC_IMX6SL=y -# CONFIG_SOC_IMX6SX is not set -CONFIG_SOC_VF610=y -CONFIG_IMX_HAVE_PLATFORM_FEC=y -CONFIG_IMX_HAVE_PLATFORM_FLEXCAN=y -CONFIG_IMX_HAVE_PLATFORM_FSL_USB2_UDC=y -CONFIG_IMX_HAVE_PLATFORM_GPIO_KEYS=y -CONFIG_IMX_HAVE_PLATFORM_IMX2_WDT=y -CONFIG_IMX_HAVE_PLATFORM_IMX_FB=y -CONFIG_IMX_HAVE_PLATFORM_IMX_I2C=y -CONFIG_IMX_HAVE_PLATFORM_IMX_KEYPAD=y -CONFIG_IMX_HAVE_PLATFORM_IMX_SSI=y -CONFIG_IMX_HAVE_PLATFORM_IMX_UART=y -CONFIG_IMX_HAVE_PLATFORM_IPU_CORE=y -CONFIG_IMX_HAVE_PLATFORM_MXC_EHCI=y -CONFIG_IMX_HAVE_PLATFORM_MXC_MMC=y -CONFIG_IMX_HAVE_PLATFORM_MXC_NAND=y -CONFIG_IMX_HAVE_PLATFORM_MXC_RNGA=y -CONFIG_IMX_HAVE_PLATFORM_MXC_RTC=y -CONFIG_IMX_HAVE_PLATFORM_MXC_W1=y -CONFIG_IMX_HAVE_PLATFORM_SDHCI_ESDHC_IMX=y -CONFIG_IMX_HAVE_PLATFORM_SPI_IMX=y - -# -# TI OMAP/AM/DM/DRA Family -# -# CONFIG_ARCH_OMAP2 is not set -# CONFIG_ARCH_OMAP3 is not set -# CONFIG_ARCH_OMAP4 is not set -# CONFIG_SOC_OMAP5 is not set -# CONFIG_SOC_AM33XX is not set -# CONFIG_SOC_AM43XX is not set -# CONFIG_SOC_DRA7XX is not set -# CONFIG_ARCH_PICOXCELL is not set -# CONFIG_ARCH_QCOM is not set -# CONFIG_ARCH_ROCKCHIP is not set -# CONFIG_ARCH_SOCFPGA is not set -# CONFIG_PLAT_SPEAR is not set -# CONFIG_ARCH_STI is not set -# CONFIG_ARCH_EXYNOS is not set -# CONFIG_ARCH_SHMOBILE_MULTI is not set -# CONFIG_ARCH_SUNXI is not set -# CONFIG_ARCH_SIRF is not set -# CONFIG_ARCH_TEGRA is not set -# CONFIG_ARCH_U8500 is not set -# CONFIG_ARCH_VEXPRESS is not set -# CONFIG_ARCH_WM8750 is not set -# CONFIG_ARCH_WM8850 is not set -# CONFIG_ARCH_ZYNQ is not set - -# -# Processor Type -# -CONFIG_CPU_V6=y -CONFIG_CPU_V6K=y -CONFIG_CPU_V7=y -CONFIG_CPU_32v6=y -CONFIG_CPU_32v6K=y -CONFIG_CPU_32v7=y -CONFIG_CPU_ABRT_EV6=y -CONFIG_CPU_ABRT_EV7=y -CONFIG_CPU_PABRT_V6=y -CONFIG_CPU_PABRT_V7=y -CONFIG_CPU_CACHE_V6=y -CONFIG_CPU_CACHE_V7=y -CONFIG_CPU_CACHE_VIPT=y -CONFIG_CPU_COPY_V6=y -CONFIG_CPU_TLB_V6=y -CONFIG_CPU_TLB_V7=y -CONFIG_CPU_HAS_ASID=y -CONFIG_CPU_CP15=y -CONFIG_CPU_CP15_MMU=y - -# -# Processor Features -# -# CONFIG_ARCH_PHYS_ADDR_T_64BIT is not set -CONFIG_ARM_THUMB=y -# CONFIG_ARM_THUMBEE is not set -CONFIG_ARM_VIRT_EXT=y -CONFIG_SWP_EMULATE=y -# CONFIG_CPU_ICACHE_DISABLE is not set -# CONFIG_CPU_DCACHE_DISABLE is not set -# CONFIG_CPU_BPREDICT_DISABLE is not set -CONFIG_KUSER_HELPERS=y -CONFIG_DMA_CACHE_RWFO=y -CONFIG_OUTER_CACHE=y -CONFIG_OUTER_CACHE_SYNC=y -CONFIG_MIGHT_HAVE_CACHE_L2X0=y -CONFIG_CACHE_L2X0=y -CONFIG_PL310_ERRATA_588369=y -CONFIG_PL310_ERRATA_727915=y -# CONFIG_PL310_ERRATA_753970 is not set -CONFIG_PL310_ERRATA_769419=y -CONFIG_ARM_L1_CACHE_SHIFT_6=y -CONFIG_ARM_L1_CACHE_SHIFT=6 -CONFIG_ARM_DMA_MEM_BUFFERABLE=y -CONFIG_MULTI_IRQ_HANDLER=y -# CONFIG_ARM_ERRATA_326103 is not set -# CONFIG_ARM_ERRATA_411920 is not set -# CONFIG_ARM_ERRATA_430973 is not set -# CONFIG_ARM_ERRATA_643719 is not set -# CONFIG_ARM_ERRATA_720789 is not set -CONFIG_ARM_ERRATA_754322=y -# CONFIG_ARM_ERRATA_754327 is not set -# CONFIG_ARM_ERRATA_364296 is not set -CONFIG_ARM_ERRATA_764369=y -CONFIG_ARM_ERRATA_775420=y -# CONFIG_ARM_ERRATA_798181 is not set -# CONFIG_ARM_ERRATA_773022 is not set - -# -# Bus support -# -CONFIG_PCI=y -CONFIG_PCI_DOMAINS=y -CONFIG_PCI_SYSCALL=y -# CONFIG_PCI_MSI is not set -# CONFIG_PCI_DEBUG is not set -# CONFIG_PCI_REALLOC_ENABLE_AUTO is not set -# CONFIG_PCI_STUB is not set -# CONFIG_PCI_IOV is not set -# CONFIG_PCI_PRI is not set -# CONFIG_PCI_PASID is not set - -# -# PCI host controller drivers -# -CONFIG_PCIE_DW=y -CONFIG_PCI_IMX6=y -# CONFIG_PCI_HOST_GENERIC is not set -CONFIG_PCIEPORTBUS=y -CONFIG_PCIEAER=y -# CONFIG_PCIE_ECRC is not set -# CONFIG_PCIEAER_INJECT is not set -CONFIG_PCIEASPM=y -# CONFIG_PCIEASPM_DEBUG is not set -CONFIG_PCIEASPM_DEFAULT=y -# CONFIG_PCIEASPM_POWERSAVE is not set -# CONFIG_PCIEASPM_PERFORMANCE is not set -CONFIG_PCIE_PME=y -# CONFIG_PCCARD is not set - -# -# Kernel Features -# -CONFIG_HAVE_SMP=y -CONFIG_SMP=y -CONFIG_SMP_ON_UP=y -CONFIG_ARM_CPU_TOPOLOGY=y -# CONFIG_SCHED_MC is not set -# CONFIG_SCHED_SMT is not set -CONFIG_HAVE_ARM_SCU=y -# CONFIG_HAVE_ARM_ARCH_TIMER is not set -CONFIG_HAVE_ARM_TWD=y -# CONFIG_MCPM is not set -# CONFIG_BIG_LITTLE is not set -# CONFIG_VMSPLIT_3G is not set -CONFIG_VMSPLIT_2G=y -# CONFIG_VMSPLIT_1G is not set -CONFIG_PAGE_OFFSET=0x80000000 -CONFIG_NR_CPUS=4 -CONFIG_HOTPLUG_CPU=y -# CONFIG_ARM_PSCI is not set -CONFIG_ARCH_NR_GPIO=0 -# CONFIG_PREEMPT_NONE is not set -CONFIG_PREEMPT_VOLUNTARY=y -# CONFIG_PREEMPT is not set -CONFIG_HZ_FIXED=0 -CONFIG_HZ_100=y -# CONFIG_HZ_200 is not set -# CONFIG_HZ_250 is not set -# CONFIG_HZ_300 is not set -# CONFIG_HZ_500 is not set -# CONFIG_HZ_1000 is not set -CONFIG_HZ=100 -CONFIG_SCHED_HRTICK=y -CONFIG_AEABI=y -# CONFIG_OABI_COMPAT is not set -# CONFIG_ARCH_SPARSEMEM_DEFAULT is not set -# CONFIG_ARCH_SELECT_MEMORY_MODEL is not set -CONFIG_HAVE_ARCH_PFN_VALID=y -CONFIG_HIGHMEM=y -# CONFIG_HIGHPTE is not set -CONFIG_HW_PERF_EVENTS=y -CONFIG_ARCH_WANT_GENERAL_HUGETLB=y -CONFIG_FLATMEM=y -CONFIG_FLAT_NODE_MEM_MAP=y -CONFIG_HAVE_MEMBLOCK=y -CONFIG_NO_BOOTMEM=y -CONFIG_MEMORY_ISOLATION=y -# CONFIG_HAVE_BOOTMEM_INFO_NODE is not set -CONFIG_PAGEFLAGS_EXTENDED=y -CONFIG_SPLIT_PTLOCK_CPUS=4 -CONFIG_COMPACTION=y -CONFIG_MIGRATION=y -# CONFIG_PHYS_ADDR_T_64BIT is not set -CONFIG_ZONE_DMA_FLAG=0 -CONFIG_BOUNCE=y -# CONFIG_KSM is not set -CONFIG_DEFAULT_MMAP_MIN_ADDR=4096 -# CONFIG_CLEANCACHE is not set -# CONFIG_FRONTSWAP is not set -CONFIG_CMA=y -# CONFIG_CMA_DEBUG is not set -# CONFIG_ZBUD is not set -# CONFIG_ZSMALLOC is not set -CONFIG_FORCE_MAX_ZONEORDER=11 -CONFIG_ALIGNMENT_TRAP=y -# CONFIG_UACCESS_WITH_MEMCPY is not set -# CONFIG_SECCOMP is not set -CONFIG_SWIOTLB=y -CONFIG_IOMMU_HELPER=y - -# -# Boot options -# -CONFIG_USE_OF=y -CONFIG_ATAGS=y -# CONFIG_DEPRECATED_PARAM_STRUCT is not set -CONFIG_ZBOOT_ROM_TEXT=0 -CONFIG_ZBOOT_ROM_BSS=0 -# CONFIG_ARM_APPENDED_DTB is not set -CONFIG_CMDLINE="noinitrd console=ttymxc1,115200 init=/usr/bin/hello root=/dev/m" -# CONFIG_CMDLINE_FROM_BOOTLOADER is not set -# CONFIG_CMDLINE_EXTEND is not set -CONFIG_CMDLINE_FORCE=y -# CONFIG_KEXEC is not set -# CONFIG_CRASH_DUMP is not set -CONFIG_AUTO_ZRELADDR=y - -# -# CPU Power Management -# - -# -# CPU Frequency scaling -# -CONFIG_CPU_FREQ=y -CONFIG_CPU_FREQ_GOV_COMMON=y -CONFIG_CPU_FREQ_STAT=y -# CONFIG_CPU_FREQ_STAT_DETAILS is not set -# CONFIG_CPU_FREQ_DEFAULT_GOV_PERFORMANCE is not set -# CONFIG_CPU_FREQ_DEFAULT_GOV_POWERSAVE is not set -# CONFIG_CPU_FREQ_DEFAULT_GOV_USERSPACE is not set -CONFIG_CPU_FREQ_DEFAULT_GOV_ONDEMAND=y -# CONFIG_CPU_FREQ_DEFAULT_GOV_CONSERVATIVE is not set -CONFIG_CPU_FREQ_GOV_PERFORMANCE=y -# CONFIG_CPU_FREQ_GOV_POWERSAVE is not set -# CONFIG_CPU_FREQ_GOV_USERSPACE is not set -CONFIG_CPU_FREQ_GOV_ONDEMAND=y -# CONFIG_CPU_FREQ_GOV_CONSERVATIVE is not set -# CONFIG_GENERIC_CPUFREQ_CPU0 is not set - -# -# ARM CPU frequency scaling drivers -# -CONFIG_ARM_IMX6Q_CPUFREQ=y -# CONFIG_ARM_KIRKWOOD_CPUFREQ is not set - -# -# CPU Idle -# -# CONFIG_CPU_IDLE is not set -# CONFIG_ARCH_NEEDS_CPU_IDLE_COUPLED is not set - -# -# Floating point emulation -# - -# -# At least one emulation must be selected -# -CONFIG_VFP=y -CONFIG_VFPv3=y -CONFIG_NEON=y -# CONFIG_KERNEL_MODE_NEON is not set - -# -# Userspace binary formats -# -CONFIG_BINFMT_ELF=y -CONFIG_ARCH_BINFMT_ELF_RANDOMIZE_PIE=y -CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS=y -CONFIG_BINFMT_SCRIPT=y -# CONFIG_HAVE_AOUT is not set -CONFIG_BINFMT_MISC=m -CONFIG_COREDUMP=y - -# -# Power management options -# -CONFIG_SUSPEND=y -CONFIG_SUSPEND_FREEZER=y -# CONFIG_HIBERNATION is not set -CONFIG_PM_SLEEP=y -CONFIG_PM_SLEEP_SMP=y -# CONFIG_PM_AUTOSLEEP is not set -# CONFIG_PM_WAKELOCKS is not set -CONFIG_PM_RUNTIME=y -CONFIG_PM=y -CONFIG_PM_DEBUG=y -# CONFIG_PM_ADVANCED_DEBUG is not set -CONFIG_PM_TEST_SUSPEND=y -CONFIG_PM_SLEEP_DEBUG=y -# CONFIG_APM_EMULATION is not set -CONFIG_ARCH_HAS_OPP=y -CONFIG_PM_OPP=y -CONFIG_PM_CLK=y -# CONFIG_WQ_POWER_EFFICIENT_DEFAULT is not set -CONFIG_CPU_PM=y -CONFIG_ARCH_SUSPEND_POSSIBLE=y -CONFIG_ARM_CPU_SUSPEND=y -CONFIG_ARCH_HIBERNATION_POSSIBLE=y -CONFIG_NET=y - -# -# Networking options -# -CONFIG_PACKET=y -# CONFIG_PACKET_DIAG is not set -CONFIG_UNIX=y -# CONFIG_UNIX_DIAG is not set -CONFIG_XFRM=y -# CONFIG_XFRM_USER is not set -# CONFIG_XFRM_SUB_POLICY is not set -# CONFIG_XFRM_MIGRATE is not set -# CONFIG_XFRM_STATISTICS is not set -# CONFIG_NET_KEY is not set -CONFIG_INET=y -# CONFIG_IP_MULTICAST is not set -# CONFIG_IP_ADVANCED_ROUTER is not set -CONFIG_IP_PNP=y -CONFIG_IP_PNP_DHCP=y -# CONFIG_IP_PNP_BOOTP is not set -# CONFIG_IP_PNP_RARP is not set -# CONFIG_NET_IPIP is not set -# CONFIG_NET_IPGRE_DEMUX is not set -CONFIG_NET_IP_TUNNEL=y -# CONFIG_SYN_COOKIES is not set -# CONFIG_INET_AH is not set -# CONFIG_INET_ESP is not set -# CONFIG_INET_IPCOMP is not set -# CONFIG_INET_XFRM_TUNNEL is not set -CONFIG_INET_TUNNEL=y -# CONFIG_INET_XFRM_MODE_TRANSPORT is not set -# CONFIG_INET_XFRM_MODE_TUNNEL is not set -# CONFIG_INET_XFRM_MODE_BEET is not set -# CONFIG_INET_LRO is not set -CONFIG_INET_DIAG=y -CONFIG_INET_TCP_DIAG=y -# CONFIG_INET_UDP_DIAG is not set -# CONFIG_TCP_CONG_ADVANCED is not set -CONFIG_TCP_CONG_CUBIC=y -CONFIG_DEFAULT_TCP_CONG="cubic" -# CONFIG_TCP_MD5SIG is not set -CONFIG_IPV6=y -# CONFIG_IPV6_ROUTER_PREF is not set -# CONFIG_IPV6_OPTIMISTIC_DAD is not set -# CONFIG_INET6_AH is not set -# CONFIG_INET6_ESP is not set -# CONFIG_INET6_IPCOMP is not set -# CONFIG_IPV6_MIP6 is not set -# CONFIG_INET6_XFRM_TUNNEL is not set -# CONFIG_INET6_TUNNEL is not set -CONFIG_INET6_XFRM_MODE_TRANSPORT=y -CONFIG_INET6_XFRM_MODE_TUNNEL=y -CONFIG_INET6_XFRM_MODE_BEET=y -# CONFIG_INET6_XFRM_MODE_ROUTEOPTIMIZATION is not set -# CONFIG_IPV6_VTI is not set -CONFIG_IPV6_SIT=y -# CONFIG_IPV6_SIT_6RD is not set -CONFIG_IPV6_NDISC_NODETYPE=y -# CONFIG_IPV6_TUNNEL is not set -# CONFIG_IPV6_GRE is not set -# CONFIG_IPV6_MULTIPLE_TABLES is not set -# CONFIG_IPV6_MROUTE is not set -# CONFIG_NETWORK_SECMARK is not set -CONFIG_NET_PTP_CLASSIFY=y -# CONFIG_NETWORK_PHY_TIMESTAMPING is not set -CONFIG_NETFILTER=y -# CONFIG_NETFILTER_DEBUG is not set -CONFIG_NETFILTER_ADVANCED=y - -# -# Core Netfilter Configuration -# -# CONFIG_NETFILTER_NETLINK_ACCT is not set -# CONFIG_NETFILTER_NETLINK_QUEUE is not set -# CONFIG_NETFILTER_NETLINK_LOG is not set -# CONFIG_NF_CONNTRACK is not set -# CONFIG_NF_TABLES is not set -# CONFIG_NETFILTER_XTABLES is not set -# CONFIG_IP_SET is not set -# CONFIG_IP_VS is not set - -# -# IP: Netfilter Configuration -# -# CONFIG_NF_DEFRAG_IPV4 is not set -# CONFIG_IP_NF_IPTABLES is not set -# CONFIG_IP_NF_ARPTABLES is not set - -# -# IPv6: Netfilter Configuration -# -# CONFIG_NF_DEFRAG_IPV6 is not set -# CONFIG_IP6_NF_IPTABLES is not set -# CONFIG_IP_DCCP is not set -# CONFIG_IP_SCTP is not set -# CONFIG_RDS is not set -# CONFIG_TIPC is not set -# CONFIG_ATM is not set -# CONFIG_L2TP is not set -# CONFIG_BRIDGE is not set -CONFIG_HAVE_NET_DSA=y -# CONFIG_VLAN_8021Q is not set -# CONFIG_DECNET is not set -# CONFIG_LLC2 is not set -# CONFIG_IPX is not set -# CONFIG_ATALK is not set -# CONFIG_X25 is not set -# CONFIG_LAPB is not set -# CONFIG_PHONET is not set -# CONFIG_IEEE802154 is not set -# CONFIG_NET_SCHED is not set -# CONFIG_DCB is not set -CONFIG_DNS_RESOLVER=y -# CONFIG_BATMAN_ADV is not set -# CONFIG_OPENVSWITCH is not set -# CONFIG_VSOCKETS is not set -# CONFIG_NETLINK_MMAP is not set -# CONFIG_NETLINK_DIAG is not set -# CONFIG_NET_MPLS_GSO is not set -# CONFIG_HSR is not set -CONFIG_RPS=y -CONFIG_RFS_ACCEL=y -CONFIG_XPS=y -# CONFIG_CGROUP_NET_PRIO is not set -# CONFIG_CGROUP_NET_CLASSID is not set -CONFIG_NET_RX_BUSY_POLL=y -CONFIG_BQL=y -# CONFIG_BPF_JIT is not set -CONFIG_NET_FLOW_LIMIT=y - -# -# Network testing -# -# CONFIG_NET_PKTGEN is not set -# CONFIG_HAMRADIO is not set -# CONFIG_CAN is not set -# CONFIG_IRDA is not set -# CONFIG_BT is not set -# CONFIG_AF_RXRPC is not set -CONFIG_WIRELESS=y -CONFIG_CFG80211=y -# CONFIG_NL80211_TESTMODE is not set -# CONFIG_CFG80211_DEVELOPER_WARNINGS is not set -# CONFIG_CFG80211_REG_DEBUG is not set -# CONFIG_CFG80211_CERTIFICATION_ONUS is not set -CONFIG_CFG80211_DEFAULT_PS=y -# CONFIG_CFG80211_DEBUGFS is not set -# CONFIG_CFG80211_INTERNAL_REGDB is not set -# CONFIG_CFG80211_WEXT is not set -# CONFIG_LIB80211 is not set -CONFIG_MAC80211=y -CONFIG_MAC80211_HAS_RC=y -# CONFIG_MAC80211_RC_PID is not set -CONFIG_MAC80211_RC_MINSTREL=y -CONFIG_MAC80211_RC_MINSTREL_HT=y -CONFIG_MAC80211_RC_DEFAULT_MINSTREL=y -CONFIG_MAC80211_RC_DEFAULT="minstrel_ht" -# CONFIG_MAC80211_MESH is not set -# CONFIG_MAC80211_LEDS is not set -# CONFIG_MAC80211_DEBUGFS is not set -# CONFIG_MAC80211_MESSAGE_TRACING is not set -# CONFIG_MAC80211_DEBUG_MENU is not set -# CONFIG_WIMAX is not set -CONFIG_RFKILL=y -CONFIG_RFKILL_LEDS=y -CONFIG_RFKILL_INPUT=y -# CONFIG_RFKILL_REGULATOR is not set -# CONFIG_RFKILL_GPIO is not set -# CONFIG_NET_9P is not set -# CONFIG_CAIF is not set -# CONFIG_CEPH_LIB is not set -# CONFIG_NFC is not set -CONFIG_HAVE_BPF_JIT=y - -# -# Device Drivers -# - -# -# Generic Driver Options -# -CONFIG_UEVENT_HELPER=y -CONFIG_UEVENT_HELPER_PATH="" -CONFIG_DEVTMPFS=y -CONFIG_DEVTMPFS_MOUNT=y -# CONFIG_STANDALONE is not set -CONFIG_PREVENT_FIRMWARE_BUILD=y -CONFIG_FW_LOADER=y -CONFIG_FIRMWARE_IN_KERNEL=y -CONFIG_EXTRA_FIRMWARE="" -CONFIG_FW_LOADER_USER_HELPER=y -# CONFIG_DEBUG_DRIVER is not set -# CONFIG_DEBUG_DEVRES is not set -# CONFIG_SYS_HYPERVISOR is not set -# CONFIG_GENERIC_CPU_DEVICES is not set -CONFIG_SOC_BUS=y -CONFIG_REGMAP=y -CONFIG_REGMAP_I2C=y -CONFIG_REGMAP_SPI=y -CONFIG_REGMAP_MMIO=y -CONFIG_REGMAP_IRQ=y -CONFIG_DMA_SHARED_BUFFER=y -CONFIG_DMA_CMA=y - -# -# Default contiguous memory area size: -# -CONFIG_CMA_SIZE_MBYTES=16 -CONFIG_CMA_SIZE_SEL_MBYTES=y -# CONFIG_CMA_SIZE_SEL_PERCENTAGE is not set -# CONFIG_CMA_SIZE_SEL_MIN is not set -# CONFIG_CMA_SIZE_SEL_MAX is not set -CONFIG_CMA_ALIGNMENT=8 -CONFIG_CMA_AREAS=7 - -# -# Bus devices -# -# CONFIG_BRCMSTB_GISB_ARB is not set -CONFIG_IMX_WEIM=y -# CONFIG_ARM_CCI is not set -# CONFIG_VEXPRESS_CONFIG is not set -CONFIG_CONNECTOR=y -CONFIG_PROC_EVENTS=y -CONFIG_MTD=y -# CONFIG_MTD_TESTS is not set -# CONFIG_MTD_REDBOOT_PARTS is not set -CONFIG_MTD_CMDLINE_PARTS=y -# CONFIG_MTD_AFS_PARTS is not set -CONFIG_MTD_OF_PARTS=y -# CONFIG_MTD_AR7_PARTS is not set - -# -# User Modules And Translation Layers -# -CONFIG_MTD_BLKDEVS=y -CONFIG_MTD_BLOCK=y -# CONFIG_FTL is not set -# CONFIG_NFTL is not set -# CONFIG_INFTL is not set -# CONFIG_RFD_FTL is not set -# CONFIG_SSFDC is not set -# CONFIG_SM_FTL is not set -# CONFIG_MTD_OOPS is not set -# CONFIG_MTD_SWAP is not set - -# -# RAM/ROM/Flash chip drivers -# -CONFIG_MTD_CFI=y -CONFIG_MTD_JEDECPROBE=y -CONFIG_MTD_GEN_PROBE=y -# CONFIG_MTD_CFI_ADV_OPTIONS is not set -CONFIG_MTD_MAP_BANK_WIDTH_1=y -CONFIG_MTD_MAP_BANK_WIDTH_2=y -CONFIG_MTD_MAP_BANK_WIDTH_4=y -# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set -# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set -# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set -CONFIG_MTD_CFI_I1=y -CONFIG_MTD_CFI_I2=y -# CONFIG_MTD_CFI_I4 is not set -# CONFIG_MTD_CFI_I8 is not set -CONFIG_MTD_CFI_INTELEXT=y -CONFIG_MTD_CFI_AMDSTD=y -CONFIG_MTD_CFI_STAA=y -CONFIG_MTD_CFI_UTIL=y -# CONFIG_MTD_RAM is not set -# CONFIG_MTD_ROM is not set -# CONFIG_MTD_ABSENT is not set - -# -# Mapping drivers for chip access -# -# CONFIG_MTD_COMPLEX_MAPPINGS is not set -# CONFIG_MTD_PHYSMAP is not set -CONFIG_MTD_PHYSMAP_OF=y -# CONFIG_MTD_IMPA7 is not set -# CONFIG_MTD_INTEL_VR_NOR is not set -# CONFIG_MTD_PLATRAM is not set - -# -# Self-contained MTD device drivers -# -# CONFIG_MTD_PMC551 is not set -CONFIG_MTD_DATAFLASH=y -# CONFIG_MTD_DATAFLASH_WRITE_VERIFY is not set -# CONFIG_MTD_DATAFLASH_OTP is not set -CONFIG_MTD_M25P80=y -CONFIG_MTD_SST25L=y -# CONFIG_MTD_SLRAM is not set -# CONFIG_MTD_PHRAM is not set -# CONFIG_MTD_MTDRAM is not set -# CONFIG_MTD_BLOCK2MTD is not set - -# -# Disk-On-Chip Device Drivers -# -# CONFIG_MTD_DOCG3 is not set -CONFIG_MTD_NAND_ECC=y -# CONFIG_MTD_NAND_ECC_SMC is not set -CONFIG_MTD_NAND=y -# CONFIG_MTD_NAND_ECC_BCH is not set -# CONFIG_MTD_SM_COMMON is not set -# CONFIG_MTD_NAND_DENALI is not set -# CONFIG_MTD_NAND_GPIO is not set -CONFIG_MTD_NAND_IDS=y -# CONFIG_MTD_NAND_RICOH is not set -# CONFIG_MTD_NAND_DISKONCHIP is not set -# CONFIG_MTD_NAND_DOCG4 is not set -# CONFIG_MTD_NAND_CAFE is not set -# CONFIG_MTD_NAND_NANDSIM is not set -CONFIG_MTD_NAND_GPMI_NAND=y -# CONFIG_MTD_NAND_PLATFORM is not set -CONFIG_MTD_NAND_MXC=y -# CONFIG_MTD_ONENAND is not set - -# -# LPDDR & LPDDR2 PCM memory drivers -# -# CONFIG_MTD_LPDDR is not set -# CONFIG_MTD_LPDDR2_NVM is not set -CONFIG_MTD_SPI_NOR=y -# CONFIG_SPI_FSL_QUADSPI is not set -CONFIG_MTD_UBI=y -CONFIG_MTD_UBI_WL_THRESHOLD=4096 -CONFIG_MTD_UBI_BEB_LIMIT=20 -# CONFIG_MTD_UBI_FASTMAP is not set -# CONFIG_MTD_UBI_GLUEBI is not set -# CONFIG_MTD_UBI_BLOCK is not set -CONFIG_DTC=y -CONFIG_OF=y - -# -# Device Tree and Open Firmware support -# -# CONFIG_OF_SELFTEST is not set -CONFIG_OF_FLATTREE=y -CONFIG_OF_EARLY_FLATTREE=y -CONFIG_OF_ADDRESS=y -CONFIG_OF_ADDRESS_PCI=y -CONFIG_OF_IRQ=y -CONFIG_OF_NET=y -CONFIG_OF_MDIO=y -CONFIG_OF_PCI=y -CONFIG_OF_PCI_IRQ=y -CONFIG_OF_MTD=y -CONFIG_OF_RESERVED_MEM=y -CONFIG_ARCH_MIGHT_HAVE_PC_PARPORT=y -# CONFIG_PARPORT is not set -CONFIG_BLK_DEV=y -# CONFIG_BLK_DEV_NULL_BLK is not set -# CONFIG_BLK_DEV_PCIESSD_MTIP32XX is not set -# CONFIG_BLK_CPQ_CISS_DA is not set -# CONFIG_BLK_DEV_DAC960 is not set -# CONFIG_BLK_DEV_UMEM is not set -# CONFIG_BLK_DEV_COW_COMMON is not set -CONFIG_BLK_DEV_LOOP=y -CONFIG_BLK_DEV_LOOP_MIN_COUNT=8 -# CONFIG_BLK_DEV_CRYPTOLOOP is not set -# CONFIG_BLK_DEV_DRBD is not set -# CONFIG_BLK_DEV_NBD is not set -# CONFIG_BLK_DEV_NVME is not set -# CONFIG_BLK_DEV_SX8 is not set -CONFIG_BLK_DEV_RAM=y -CONFIG_BLK_DEV_RAM_COUNT=16 -CONFIG_BLK_DEV_RAM_SIZE=65536 -# CONFIG_BLK_DEV_XIP is not set -# CONFIG_CDROM_PKTCDVD is not set -# CONFIG_ATA_OVER_ETH is not set -# CONFIG_MG_DISK is not set -# CONFIG_BLK_DEV_RBD is not set -# CONFIG_BLK_DEV_RSXX is not set - -# -# Misc devices -# -# CONFIG_SENSORS_LIS3LV02D is not set -# CONFIG_AD525X_DPOT is not set -# CONFIG_DUMMY_IRQ is not set -# CONFIG_PHANTOM is not set -# CONFIG_SGI_IOC4 is not set -# CONFIG_TIFM_CORE is not set -# CONFIG_ICS932S401 is not set -# CONFIG_ENCLOSURE_SERVICES is not set -# CONFIG_HP_ILO is not set -# CONFIG_APDS9802ALS is not set -# CONFIG_ISL29003 is not set -# CONFIG_ISL29020 is not set -# CONFIG_SENSORS_TSL2550 is not set -# CONFIG_SENSORS_BH1780 is not set -# CONFIG_SENSORS_BH1770 is not set -# CONFIG_SENSORS_APDS990X is not set -# CONFIG_HMC6352 is not set -# CONFIG_DS1682 is not set -# CONFIG_TI_DAC7512 is not set -# CONFIG_BMP085_I2C is not set -# CONFIG_BMP085_SPI is not set -# CONFIG_USB_SWITCH_FSA9480 is not set -# CONFIG_LATTICE_ECP3_CONFIG is not set -CONFIG_SRAM=y -# CONFIG_C2PORT is not set - -# -# EEPROM support -# -CONFIG_EEPROM_AT24=y -CONFIG_EEPROM_AT25=y -# CONFIG_EEPROM_LEGACY is not set -# CONFIG_EEPROM_MAX6875 is not set -# CONFIG_EEPROM_93CX6 is not set -# CONFIG_EEPROM_93XX46 is not set -# CONFIG_CB710_CORE is not set - -# -# Texas Instruments shared transport line discipline -# -# CONFIG_TI_ST is not set -# CONFIG_SENSORS_LIS3_SPI is not set -# CONFIG_SENSORS_LIS3_I2C is not set - -# -# Altera FPGA firmware download module -# -# CONFIG_ALTERA_STAPL is not set - -# -# Intel MIC Host Driver -# - -# -# Intel MIC Card Driver -# -# CONFIG_ECHO is not set -CONFIG_HAVE_IDE=y -# CONFIG_IDE is not set - -# -# SCSI device support -# -CONFIG_SCSI_MOD=y -# CONFIG_RAID_ATTRS is not set -CONFIG_SCSI=y -CONFIG_SCSI_DMA=y -# CONFIG_SCSI_TGT is not set -# CONFIG_SCSI_NETLINK is not set -# CONFIG_SCSI_PROC_FS is not set - -# -# SCSI support type (disk, tape, CD-ROM) -# -CONFIG_BLK_DEV_SD=y -# CONFIG_CHR_DEV_ST is not set -# CONFIG_CHR_DEV_OSST is not set -# CONFIG_BLK_DEV_SR is not set -# CONFIG_CHR_DEV_SG is not set -# CONFIG_CHR_DEV_SCH is not set -CONFIG_SCSI_MULTI_LUN=y -CONFIG_SCSI_CONSTANTS=y -CONFIG_SCSI_LOGGING=y -CONFIG_SCSI_SCAN_ASYNC=y - -# -# SCSI Transports -# -# CONFIG_SCSI_SPI_ATTRS is not set -# CONFIG_SCSI_FC_ATTRS is not set -# CONFIG_SCSI_ISCSI_ATTRS is not set -# CONFIG_SCSI_SAS_ATTRS is not set -# CONFIG_SCSI_SAS_LIBSAS is not set -# CONFIG_SCSI_SRP_ATTRS is not set -# CONFIG_SCSI_LOWLEVEL is not set -# CONFIG_SCSI_DH is not set -# CONFIG_SCSI_OSD_INITIATOR is not set -CONFIG_ATA=y -# CONFIG_ATA_NONSTANDARD is not set -CONFIG_ATA_VERBOSE_ERROR=y -CONFIG_SATA_PMP=y - -# -# Controllers with non-SFF native interface -# -# CONFIG_SATA_AHCI is not set -CONFIG_SATA_AHCI_PLATFORM=y -CONFIG_AHCI_IMX=y -# CONFIG_SATA_INIC162X is not set -# CONFIG_SATA_ACARD_AHCI is not set -# CONFIG_SATA_SIL24 is not set -CONFIG_ATA_SFF=y - -# -# SFF controllers with custom DMA interface -# -# CONFIG_PDC_ADMA is not set -# CONFIG_SATA_QSTOR is not set -# CONFIG_SATA_SX4 is not set -CONFIG_ATA_BMDMA=y - -# -# SATA SFF controllers with BMDMA -# -# CONFIG_ATA_PIIX is not set -# CONFIG_SATA_MV is not set -# CONFIG_SATA_NV is not set -# CONFIG_SATA_PROMISE is not set -# CONFIG_SATA_SIL is not set -# CONFIG_SATA_SIS is not set -# CONFIG_SATA_SVW is not set -# CONFIG_SATA_ULI is not set -# CONFIG_SATA_VIA is not set -# CONFIG_SATA_VITESSE is not set - -# -# PATA SFF controllers with BMDMA -# -# CONFIG_PATA_ALI is not set -# CONFIG_PATA_AMD is not set -# CONFIG_PATA_ARTOP is not set -# CONFIG_PATA_ATIIXP is not set -# CONFIG_PATA_ATP867X is not set -# CONFIG_PATA_CMD64X is not set -# CONFIG_PATA_CYPRESS is not set -# CONFIG_PATA_EFAR is not set -# CONFIG_PATA_HPT366 is not set -# CONFIG_PATA_HPT37X is not set -# CONFIG_PATA_HPT3X2N is not set -# CONFIG_PATA_HPT3X3 is not set -CONFIG_PATA_IMX=y -# CONFIG_PATA_IT8213 is not set -# CONFIG_PATA_IT821X is not set -# CONFIG_PATA_JMICRON is not set -# CONFIG_PATA_MARVELL is not set -# CONFIG_PATA_NETCELL is not set -# CONFIG_PATA_NINJA32 is not set -# CONFIG_PATA_NS87415 is not set -# CONFIG_PATA_OLDPIIX is not set -# CONFIG_PATA_OPTIDMA is not set -# CONFIG_PATA_PDC2027X is not set -# CONFIG_PATA_PDC_OLD is not set -# CONFIG_PATA_RADISYS is not set -# CONFIG_PATA_RDC is not set -# CONFIG_PATA_SCH is not set -# CONFIG_PATA_SERVERWORKS is not set -# CONFIG_PATA_SIL680 is not set -# CONFIG_PATA_SIS is not set -# CONFIG_PATA_TOSHIBA is not set -# CONFIG_PATA_TRIFLEX is not set -# CONFIG_PATA_VIA is not set -# CONFIG_PATA_WINBOND is not set - -# -# PIO-only SFF controllers -# -# CONFIG_PATA_CMD640_PCI is not set -# CONFIG_PATA_MPIIX is not set -# CONFIG_PATA_NS87410 is not set -# CONFIG_PATA_OPTI is not set -# CONFIG_PATA_PLATFORM is not set -# CONFIG_PATA_RZ1000 is not set - -# -# Generic fallback / legacy drivers -# -# CONFIG_ATA_GENERIC is not set -# CONFIG_PATA_LEGACY is not set -# CONFIG_MD is not set -# CONFIG_TARGET_CORE is not set -# CONFIG_FUSION is not set - -# -# IEEE 1394 (FireWire) support -# -# CONFIG_FIREWIRE is not set -# CONFIG_FIREWIRE_NOSY is not set -# CONFIG_I2O is not set -CONFIG_NETDEVICES=y -CONFIG_MII=y -CONFIG_NET_CORE=y -# CONFIG_BONDING is not set -# CONFIG_DUMMY is not set -# CONFIG_EQUALIZER is not set -# CONFIG_NET_FC is not set -# CONFIG_NET_TEAM is not set -# CONFIG_MACVLAN is not set -# CONFIG_VXLAN is not set -# CONFIG_NETCONSOLE is not set -# CONFIG_NETPOLL is not set -# CONFIG_NET_POLL_CONTROLLER is not set -# CONFIG_TUN is not set -# CONFIG_VETH is not set -# CONFIG_NLMON is not set -# CONFIG_ARCNET is not set - -# -# CAIF transport drivers -# - -# -# Distributed Switch Architecture drivers -# -# CONFIG_NET_DSA_MV88E6XXX is not set -# CONFIG_NET_DSA_MV88E6060 is not set -# CONFIG_NET_DSA_MV88E6XXX_NEED_PPU is not set -# CONFIG_NET_DSA_MV88E6131 is not set -# CONFIG_NET_DSA_MV88E6123_61_65 is not set -CONFIG_ETHERNET=y -CONFIG_NET_VENDOR_3COM=y -# CONFIG_VORTEX is not set -# CONFIG_TYPHOON is not set -CONFIG_NET_VENDOR_ADAPTEC=y -# CONFIG_ADAPTEC_STARFIRE is not set -CONFIG_NET_VENDOR_ALTEON=y -# CONFIG_ACENIC is not set -# CONFIG_ALTERA_TSE is not set -CONFIG_NET_VENDOR_AMD=y -# CONFIG_AMD8111_ETH is not set -# CONFIG_PCNET32 is not set -# CONFIG_AMD_XGBE is not set -CONFIG_NET_VENDOR_ARC=y -# CONFIG_ARC_EMAC is not set -CONFIG_NET_VENDOR_ATHEROS=y -# CONFIG_ATL2 is not set -# CONFIG_ATL1 is not set -# CONFIG_ATL1E is not set -# CONFIG_ATL1C is not set -# CONFIG_ALX is not set -CONFIG_NET_CADENCE=y -# CONFIG_NET_VENDOR_BROADCOM is not set -CONFIG_NET_VENDOR_BROCADE=y -# CONFIG_BNA is not set -# CONFIG_NET_CALXEDA_XGMAC is not set -CONFIG_NET_VENDOR_CHELSIO=y -# CONFIG_CHELSIO_T1 is not set -# CONFIG_CHELSIO_T3 is not set -# CONFIG_CHELSIO_T4 is not set -# CONFIG_CHELSIO_T4VF is not set -CONFIG_NET_VENDOR_CIRRUS=y -CONFIG_CS89x0=y -CONFIG_CS89x0_PLATFORM=y -CONFIG_NET_VENDOR_CISCO=y -# CONFIG_ENIC is not set -# CONFIG_DM9000 is not set -# CONFIG_DNET is not set -CONFIG_NET_VENDOR_DEC=y -# CONFIG_NET_TULIP is not set -CONFIG_NET_VENDOR_DLINK=y -# CONFIG_DL2K is not set -# CONFIG_SUNDANCE is not set -CONFIG_NET_VENDOR_EMULEX=y -# CONFIG_BE2NET is not set -CONFIG_NET_VENDOR_EXAR=y -# CONFIG_S2IO is not set -# CONFIG_VXGE is not set -# CONFIG_NET_VENDOR_FARADAY is not set -CONFIG_NET_VENDOR_FREESCALE=y -CONFIG_FEC=y -CONFIG_NET_VENDOR_HISILICON=y -# CONFIG_HIX5HD2_GMAC is not set -CONFIG_NET_VENDOR_HP=y -# CONFIG_HP100 is not set -# CONFIG_NET_VENDOR_INTEL is not set -# CONFIG_IP1000 is not set -# CONFIG_JME is not set -# CONFIG_NET_VENDOR_MARVELL is not set -CONFIG_NET_VENDOR_MELLANOX=y -# CONFIG_MLX4_EN is not set -# CONFIG_MLX4_CORE is not set -# CONFIG_MLX5_CORE is not set -# CONFIG_NET_VENDOR_MICREL is not set -# CONFIG_NET_VENDOR_MICROCHIP is not set -CONFIG_NET_VENDOR_MYRI=y -# CONFIG_MYRI10GE is not set -# CONFIG_FEALNX is not set -# CONFIG_NET_VENDOR_NATSEMI is not set -CONFIG_NET_VENDOR_NVIDIA=y -# CONFIG_FORCEDETH is not set -CONFIG_NET_VENDOR_OKI=y -# CONFIG_ETHOC is not set -CONFIG_NET_PACKET_ENGINE=y -# CONFIG_HAMACHI is not set -# CONFIG_YELLOWFIN is not set -CONFIG_NET_VENDOR_QLOGIC=y -# CONFIG_QLA3XXX is not set -# CONFIG_QLCNIC is not set -# CONFIG_QLGE is not set -# CONFIG_NETXEN_NIC is not set -CONFIG_NET_VENDOR_REALTEK=y -# CONFIG_8139CP is not set -# CONFIG_8139TOO is not set -# CONFIG_R8169 is not set -# CONFIG_SH_ETH is not set -CONFIG_NET_VENDOR_RDC=y -# CONFIG_R6040 is not set -CONFIG_NET_VENDOR_SAMSUNG=y -# CONFIG_SXGBE_ETH is not set -# CONFIG_NET_VENDOR_SEEQ is not set -CONFIG_NET_VENDOR_SILAN=y -# CONFIG_SC92031 is not set -CONFIG_NET_VENDOR_SIS=y -# CONFIG_SIS900 is not set -# CONFIG_SIS190 is not set -# CONFIG_SFC is not set -CONFIG_NET_VENDOR_SMSC=y -CONFIG_SMC91X=y -# CONFIG_EPIC100 is not set -CONFIG_SMC911X=y -CONFIG_SMSC911X=y -# CONFIG_SMSC911X_ARCH_HOOKS is not set -# CONFIG_SMSC9420 is not set -# CONFIG_NET_VENDOR_STMICRO is not set -CONFIG_NET_VENDOR_SUN=y -# CONFIG_HAPPYMEAL is not set -# CONFIG_SUNGEM is not set -# CONFIG_CASSINI is not set -# CONFIG_NIU is not set -CONFIG_NET_VENDOR_TEHUTI=y -# CONFIG_TEHUTI is not set -CONFIG_NET_VENDOR_TI=y -# CONFIG_TLAN is not set -CONFIG_NET_VENDOR_VIA=y -# CONFIG_VIA_RHINE is not set -# CONFIG_VIA_VELOCITY is not set -CONFIG_NET_VENDOR_WIZNET=y -# CONFIG_WIZNET_W5100 is not set -# CONFIG_WIZNET_W5300 is not set -# CONFIG_FDDI is not set -# CONFIG_HIPPI is not set -CONFIG_PHYLIB=y - -# -# MII PHY device drivers -# -CONFIG_AT803X_PHY=y -# CONFIG_AMD_PHY is not set -# CONFIG_AMD_XGBE_PHY is not set -# CONFIG_MARVELL_PHY is not set -# CONFIG_DAVICOM_PHY is not set -# CONFIG_QSEMI_PHY is not set -# CONFIG_LXT_PHY is not set -# CONFIG_CICADA_PHY is not set -# CONFIG_VITESSE_PHY is not set -# CONFIG_SMSC_PHY is not set -# CONFIG_BROADCOM_PHY is not set -# CONFIG_BCM7XXX_PHY is not set -# CONFIG_BCM87XX_PHY is not set -# CONFIG_ICPLUS_PHY is not set -# CONFIG_REALTEK_PHY is not set -# CONFIG_NATIONAL_PHY is not set -# CONFIG_STE10XP is not set -# CONFIG_LSI_ET1011C_PHY is not set -# CONFIG_MICREL_PHY is not set -# CONFIG_FIXED_PHY is not set -# CONFIG_MDIO_BITBANG is not set -# CONFIG_MDIO_BUS_MUX_GPIO is not set -# CONFIG_MDIO_BUS_MUX_MMIOREG is not set -# CONFIG_MICREL_KS8995MA is not set -# CONFIG_PPP is not set -# CONFIG_SLIP is not set - -# -# USB Network Adapters -# -# CONFIG_USB_CATC is not set -# CONFIG_USB_KAWETH is not set -# CONFIG_USB_PEGASUS is not set -# CONFIG_USB_RTL8150 is not set -# CONFIG_USB_RTL8152 is not set -# CONFIG_USB_USBNET is not set -# CONFIG_USB_HSO is not set -# CONFIG_USB_IPHETH is not set -CONFIG_WLAN=y -# CONFIG_LIBERTAS_THINFIRM is not set -# CONFIG_ATMEL is not set -# CONFIG_AT76C50X_USB is not set -# CONFIG_PRISM54 is not set -# CONFIG_USB_ZD1201 is not set -# CONFIG_USB_NET_RNDIS_WLAN is not set -# CONFIG_RTL8180 is not set -# CONFIG_RTL8187 is not set -# CONFIG_ADM8211 is not set -# CONFIG_MAC80211_HWSIM is not set -# CONFIG_MWL8K is not set -# CONFIG_ATH_CARDS is not set -# CONFIG_B43 is not set -# CONFIG_B43LEGACY is not set -CONFIG_BRCMUTIL=m -# CONFIG_BRCMSMAC is not set -CONFIG_BRCMFMAC=m -CONFIG_BRCMFMAC_SDIO=y -# CONFIG_BRCMFMAC_USB is not set -# CONFIG_BRCM_TRACING is not set -# CONFIG_BRCMDBG is not set -# CONFIG_HOSTAP is not set -# CONFIG_IPW2100 is not set -# CONFIG_IWLWIFI is not set -# CONFIG_IWL4965 is not set -# CONFIG_IWL3945 is not set -# CONFIG_LIBERTAS is not set -# CONFIG_P54_COMMON is not set -# CONFIG_RT2X00 is not set -CONFIG_RTL_CARDS=y -# CONFIG_RTL8192CE is not set -# CONFIG_RTL8192SE is not set -# CONFIG_RTL8192DE is not set -# CONFIG_RTL8723AE is not set -# CONFIG_RTL8723BE is not set -# CONFIG_RTL8188EE is not set -# CONFIG_RTL8192CU is not set -# CONFIG_WL_TI is not set -# CONFIG_ZD1211RW is not set -# CONFIG_MWIFIEX is not set -# CONFIG_CW1200 is not set -# CONFIG_RSI_91X is not set - -# -# Enable WiMAX (Networking options) to see the WiMAX drivers -# -# CONFIG_WAN is not set -# CONFIG_VMXNET3 is not set -# CONFIG_ISDN is not set - -# -# Input device support -# -CONFIG_INPUT=y -# CONFIG_INPUT_FF_MEMLESS is not set -CONFIG_INPUT_POLLDEV=y -# CONFIG_INPUT_SPARSEKMAP is not set -CONFIG_INPUT_MATRIXKMAP=y - -# -# Userland interfaces -# -CONFIG_INPUT_MOUSEDEV=y -# CONFIG_INPUT_MOUSEDEV_PSAUX is not set -CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024 -CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768 -# CONFIG_INPUT_JOYDEV is not set -CONFIG_INPUT_EVDEV=y -CONFIG_INPUT_EVBUG=m - -# -# Input Device Drivers -# -CONFIG_INPUT_KEYBOARD=y -# CONFIG_KEYBOARD_ADP5588 is not set -# CONFIG_KEYBOARD_ADP5589 is not set -CONFIG_KEYBOARD_ATKBD=y -# CONFIG_KEYBOARD_QT1070 is not set -# CONFIG_KEYBOARD_QT2160 is not set -# CONFIG_KEYBOARD_LKKBD is not set -CONFIG_KEYBOARD_GPIO=y -# CONFIG_KEYBOARD_GPIO_POLLED is not set -# CONFIG_KEYBOARD_TCA6416 is not set -# CONFIG_KEYBOARD_TCA8418 is not set -# CONFIG_KEYBOARD_MATRIX is not set -# CONFIG_KEYBOARD_LM8323 is not set -# CONFIG_KEYBOARD_LM8333 is not set -# CONFIG_KEYBOARD_MAX7359 is not set -# CONFIG_KEYBOARD_MCS is not set -# CONFIG_KEYBOARD_MPR121 is not set -CONFIG_KEYBOARD_IMX=y -# CONFIG_KEYBOARD_NEWTON is not set -# CONFIG_KEYBOARD_OPENCORES is not set -# CONFIG_KEYBOARD_SAMSUNG is not set -# CONFIG_KEYBOARD_STOWAWAY is not set -# CONFIG_KEYBOARD_SUNKBD is not set -# CONFIG_KEYBOARD_STMPE is not set -# CONFIG_KEYBOARD_OMAP4 is not set -# CONFIG_KEYBOARD_XTKBD is not set -CONFIG_INPUT_MOUSE=y -CONFIG_MOUSE_PS2=m -CONFIG_MOUSE_PS2_ALPS=y -CONFIG_MOUSE_PS2_LOGIPS2PP=y -CONFIG_MOUSE_PS2_SYNAPTICS=y -CONFIG_MOUSE_PS2_CYPRESS=y -CONFIG_MOUSE_PS2_TRACKPOINT=y -CONFIG_MOUSE_PS2_ELANTECH=y -# CONFIG_MOUSE_PS2_SENTELIC is not set -# CONFIG_MOUSE_PS2_TOUCHKIT is not set -# CONFIG_MOUSE_SERIAL is not set -# CONFIG_MOUSE_APPLETOUCH is not set -# CONFIG_MOUSE_BCM5974 is not set -# CONFIG_MOUSE_CYAPA is not set -# CONFIG_MOUSE_VSXXXAA is not set -# CONFIG_MOUSE_GPIO is not set -# CONFIG_MOUSE_SYNAPTICS_I2C is not set -# CONFIG_MOUSE_SYNAPTICS_USB is not set -# CONFIG_INPUT_JOYSTICK is not set -# CONFIG_INPUT_TABLET is not set -CONFIG_INPUT_TOUCHSCREEN=y -CONFIG_OF_TOUCHSCREEN=y -# CONFIG_TOUCHSCREEN_ADS7846 is not set -# CONFIG_TOUCHSCREEN_AD7877 is not set -# CONFIG_TOUCHSCREEN_AD7879 is not set -# CONFIG_TOUCHSCREEN_ATMEL_MXT is not set -# CONFIG_TOUCHSCREEN_AUO_PIXCIR is not set -# CONFIG_TOUCHSCREEN_BU21013 is not set -# CONFIG_TOUCHSCREEN_CY8CTMG110 is not set -# CONFIG_TOUCHSCREEN_CYTTSP_CORE is not set -# CONFIG_TOUCHSCREEN_CYTTSP4_CORE is not set -# CONFIG_TOUCHSCREEN_DA9052 is not set -# CONFIG_TOUCHSCREEN_DYNAPRO is not set -# CONFIG_TOUCHSCREEN_HAMPSHIRE is not set -# CONFIG_TOUCHSCREEN_EETI is not set -CONFIG_TOUCHSCREEN_EGALAX=y -# CONFIG_TOUCHSCREEN_FUJITSU is not set -# CONFIG_TOUCHSCREEN_ILI210X is not set -# CONFIG_TOUCHSCREEN_GUNZE is not set -# CONFIG_TOUCHSCREEN_ELO is not set -# CONFIG_TOUCHSCREEN_WACOM_W8001 is not set -# CONFIG_TOUCHSCREEN_WACOM_I2C is not set -# CONFIG_TOUCHSCREEN_MAX11801 is not set -# CONFIG_TOUCHSCREEN_MCS5000 is not set -# CONFIG_TOUCHSCREEN_MMS114 is not set -# CONFIG_TOUCHSCREEN_MTOUCH is not set -# CONFIG_TOUCHSCREEN_INEXIO is not set -# CONFIG_TOUCHSCREEN_MK712 is not set -# CONFIG_TOUCHSCREEN_PENMOUNT is not set -# CONFIG_TOUCHSCREEN_EDT_FT5X06 is not set -# CONFIG_TOUCHSCREEN_TOUCHRIGHT is not set -# CONFIG_TOUCHSCREEN_TOUCHWIN is not set -# CONFIG_TOUCHSCREEN_PIXCIR is not set -# CONFIG_TOUCHSCREEN_WM97XX is not set -# CONFIG_TOUCHSCREEN_USB_COMPOSITE is not set -CONFIG_TOUCHSCREEN_MC13783=y -# CONFIG_TOUCHSCREEN_TOUCHIT213 is not set -# CONFIG_TOUCHSCREEN_TSC_SERIO is not set -# CONFIG_TOUCHSCREEN_TSC2005 is not set -CONFIG_TOUCHSCREEN_TSC2007=y -# CONFIG_TOUCHSCREEN_ST1232 is not set -CONFIG_TOUCHSCREEN_STMPE=y -# CONFIG_TOUCHSCREEN_SUR40 is not set -# CONFIG_TOUCHSCREEN_TPS6507X is not set -# CONFIG_TOUCHSCREEN_ZFORCE is not set -CONFIG_INPUT_MISC=y -# CONFIG_INPUT_AD714X is not set -# CONFIG_INPUT_BMA150 is not set -# CONFIG_INPUT_MC13783_PWRBUTTON is not set -CONFIG_INPUT_MMA8450=y -# CONFIG_INPUT_MPU3050 is not set -# CONFIG_INPUT_GP2A is not set -# CONFIG_INPUT_GPIO_BEEPER is not set -# CONFIG_INPUT_GPIO_TILT_POLLED is not set -# CONFIG_INPUT_ATI_REMOTE2 is not set -# CONFIG_INPUT_KEYSPAN_REMOTE is not set -# CONFIG_INPUT_KXTJ9 is not set -# CONFIG_INPUT_POWERMATE is not set -# CONFIG_INPUT_YEALINK is not set -# CONFIG_INPUT_CM109 is not set -# CONFIG_INPUT_UINPUT is not set -# CONFIG_INPUT_PCF8574 is not set -# CONFIG_INPUT_PWM_BEEPER is not set -# CONFIG_INPUT_GPIO_ROTARY_ENCODER is not set -# CONFIG_INPUT_DA9052_ONKEY is not set -# CONFIG_INPUT_ADXL34X is not set -# CONFIG_INPUT_IMS_PCU is not set -# CONFIG_INPUT_CMA3000 is not set -# CONFIG_INPUT_SOC_BUTTON_ARRAY is not set - -# -# Hardware I/O ports -# -CONFIG_SERIO=y -CONFIG_SERIO_SERPORT=m -# CONFIG_SERIO_PCIPS2 is not set -CONFIG_SERIO_LIBPS2=y -# CONFIG_SERIO_RAW is not set -# CONFIG_SERIO_ALTERA_PS2 is not set -# CONFIG_SERIO_PS2MULT is not set -# CONFIG_SERIO_ARC_PS2 is not set -# CONFIG_SERIO_APBPS2 is not set -# CONFIG_GAMEPORT is not set - -# -# Character devices -# -CONFIG_TTY=y -CONFIG_VT=y -CONFIG_CONSOLE_TRANSLATIONS=y -CONFIG_VT_CONSOLE=y -CONFIG_VT_CONSOLE_SLEEP=y -CONFIG_HW_CONSOLE=y -CONFIG_VT_HW_CONSOLE_BINDING=y -CONFIG_UNIX98_PTYS=y -# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set -# CONFIG_LEGACY_PTYS is not set -# CONFIG_SERIAL_NONSTANDARD is not set -# CONFIG_NOZOMI is not set -# CONFIG_N_GSM is not set -# CONFIG_TRACE_SINK is not set -# CONFIG_DEVKMEM is not set - -# -# Serial drivers -# -# CONFIG_SERIAL_8250 is not set - -# -# Non-8250 serial port support -# -# CONFIG_SERIAL_EARLYCON_ARM_SEMIHOST is not set -# CONFIG_SERIAL_MAX3100 is not set -# CONFIG_SERIAL_MAX310X is not set -# CONFIG_SERIAL_MFD_HSU is not set -CONFIG_SERIAL_IMX=y -CONFIG_SERIAL_IMX_CONSOLE=y -CONFIG_SERIAL_CORE=y -CONFIG_SERIAL_CORE_CONSOLE=y -# CONFIG_SERIAL_JSM is not set -# CONFIG_SERIAL_SCCNXP is not set -# CONFIG_SERIAL_SC16IS7XX is not set -# CONFIG_SERIAL_ALTERA_JTAGUART is not set -# CONFIG_SERIAL_ALTERA_UART is not set -# CONFIG_SERIAL_IFX6X60 is not set -# CONFIG_SERIAL_XILINX_PS_UART is not set -# CONFIG_SERIAL_ARC is not set -# CONFIG_SERIAL_RP2 is not set -CONFIG_SERIAL_FSL_LPUART=y -CONFIG_SERIAL_FSL_LPUART_CONSOLE=y -# CONFIG_SERIAL_ST_ASC is not set -# CONFIG_TTY_PRINTK is not set -# CONFIG_HVC_DCC is not set -# CONFIG_IPMI_HANDLER is not set -CONFIG_HW_RANDOM=y -# CONFIG_HW_RANDOM_TIMERIOMEM is not set -CONFIG_HW_RANDOM_MXC_RNGA=y -# CONFIG_R3964 is not set -# CONFIG_APPLICOM is not set -# CONFIG_RAW_DRIVER is not set -# CONFIG_TCG_TPM is not set -CONFIG_DEVPORT=y -CONFIG_I2C=y -CONFIG_I2C_BOARDINFO=y -# CONFIG_I2C_COMPAT is not set -CONFIG_I2C_CHARDEV=y -CONFIG_I2C_MUX=y - -# -# Multiplexer I2C Chip support -# -# CONFIG_I2C_ARB_GPIO_CHALLENGE is not set -# CONFIG_I2C_MUX_GPIO is not set -# CONFIG_I2C_MUX_PCA9541 is not set -# CONFIG_I2C_MUX_PCA954x is not set -# CONFIG_I2C_MUX_PINCTRL is not set -# CONFIG_I2C_HELPER_AUTO is not set -# CONFIG_I2C_SMBUS is not set - -# -# I2C Algorithms -# -CONFIG_I2C_ALGOBIT=y -CONFIG_I2C_ALGOPCF=m -CONFIG_I2C_ALGOPCA=m - -# -# I2C Hardware Bus support -# - -# -# PC SMBus host controller drivers -# -# CONFIG_I2C_ALI1535 is not set -# CONFIG_I2C_ALI1563 is not set -# CONFIG_I2C_ALI15X3 is not set -# CONFIG_I2C_AMD756 is not set -# CONFIG_I2C_AMD8111 is not set -# CONFIG_I2C_I801 is not set -# CONFIG_I2C_ISCH is not set -# CONFIG_I2C_PIIX4 is not set -# CONFIG_I2C_NFORCE2 is not set -# CONFIG_I2C_SIS5595 is not set -# CONFIG_I2C_SIS630 is not set -# CONFIG_I2C_SIS96X is not set -# CONFIG_I2C_VIA is not set -# CONFIG_I2C_VIAPRO is not set - -# -# I2C system bus drivers (mostly embedded / system-on-chip) -# -# CONFIG_I2C_CBUS_GPIO is not set -# CONFIG_I2C_DESIGNWARE_PLATFORM is not set -# CONFIG_I2C_DESIGNWARE_PCI is not set -# CONFIG_I2C_GPIO is not set -CONFIG_I2C_IMX=y -# CONFIG_I2C_OCORES is not set -# CONFIG_I2C_PCA_PLATFORM is not set -# CONFIG_I2C_PXA_PCI is not set -# CONFIG_I2C_RK3X is not set -# CONFIG_I2C_SIMTEC is not set -# CONFIG_I2C_XILINX is not set - -# -# External I2C/SMBus adapter drivers -# -# CONFIG_I2C_DIOLAN_U2C is not set -# CONFIG_I2C_PARPORT_LIGHT is not set -# CONFIG_I2C_ROBOTFUZZ_OSIF is not set -# CONFIG_I2C_TAOS_EVM is not set -# CONFIG_I2C_TINY_USB is not set - -# -# Other I2C/SMBus bus drivers -# -# CONFIG_I2C_STUB is not set -# CONFIG_I2C_DEBUG_CORE is not set -# CONFIG_I2C_DEBUG_ALGO is not set -# CONFIG_I2C_DEBUG_BUS is not set -CONFIG_SPI=y -# CONFIG_SPI_DEBUG is not set -CONFIG_SPI_MASTER=y - -# -# SPI Master Controller Drivers -# -# CONFIG_SPI_ALTERA is not set -CONFIG_SPI_BITBANG=y -# CONFIG_SPI_CADENCE is not set -# CONFIG_SPI_GPIO is not set -CONFIG_SPI_IMX=y -# CONFIG_SPI_FSL_SPI is not set -# CONFIG_SPI_FSL_DSPI is not set -# CONFIG_SPI_OC_TINY is not set -# CONFIG_SPI_PXA2XX is not set -# CONFIG_SPI_PXA2XX_PCI is not set -# CONFIG_SPI_SC18IS602 is not set -# CONFIG_SPI_XCOMM is not set -# CONFIG_SPI_XILINX is not set -# CONFIG_SPI_DESIGNWARE is not set - -# -# SPI Protocol Masters -# -# CONFIG_SPI_SPIDEV is not set -# CONFIG_SPI_TLE62X0 is not set -# CONFIG_SPMI is not set -# CONFIG_HSI is not set - -# -# PPS support -# -CONFIG_PPS=y -# CONFIG_PPS_DEBUG is not set - -# -# PPS clients support -# -# CONFIG_PPS_CLIENT_KTIMER is not set -# CONFIG_PPS_CLIENT_LDISC is not set -# CONFIG_PPS_CLIENT_GPIO is not set - -# -# PPS generators support -# - -# -# PTP clock support -# -CONFIG_PTP_1588_CLOCK=y - -# -# Enable PHYLIB and NETWORK_PHY_TIMESTAMPING to see the additional clocks. -# -CONFIG_PINCTRL=y - -# -# Pin controllers -# -CONFIG_PINMUX=y -CONFIG_PINCONF=y -# CONFIG_DEBUG_PINCTRL is not set -# CONFIG_PINCTRL_BCM281XX is not set -CONFIG_PINCTRL_IMX=y -CONFIG_PINCTRL_IMX35=y -CONFIG_PINCTRL_IMX50=y -CONFIG_PINCTRL_IMX51=y -CONFIG_PINCTRL_IMX53=y -CONFIG_PINCTRL_IMX6Q=y -CONFIG_PINCTRL_IMX6SL=y -CONFIG_PINCTRL_VF610=y -# CONFIG_PINCTRL_APQ8064 is not set -# CONFIG_PINCTRL_IPQ8064 is not set -# CONFIG_PINCTRL_SINGLE is not set -CONFIG_ARCH_HAVE_CUSTOM_GPIO_H=y -CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y -CONFIG_ARCH_REQUIRE_GPIOLIB=y -CONFIG_GPIOLIB=y -CONFIG_GPIO_DEVRES=y -CONFIG_OF_GPIO=y -# CONFIG_DEBUG_GPIO is not set -CONFIG_GPIO_SYSFS=y -CONFIG_GPIO_GENERIC=y -# CONFIG_GPIO_DA9052 is not set - -# -# Memory mapped GPIO drivers: -# -# CONFIG_GPIO_GENERIC_PLATFORM is not set -# CONFIG_GPIO_DWAPB is not set -# CONFIG_GPIO_EM is not set -# CONFIG_GPIO_ZEVIO is not set -CONFIG_GPIO_MXC=y -# CONFIG_GPIO_SCH311X is not set -# CONFIG_GPIO_SYSCON is not set -# CONFIG_GPIO_VX855 is not set -# CONFIG_GPIO_GRGPIO is not set - -# -# I2C GPIO expanders: -# -# CONFIG_GPIO_MAX7300 is not set -# CONFIG_GPIO_MAX732X is not set -CONFIG_GPIO_MC9S08DZ60=y -# CONFIG_GPIO_PCA953X is not set -# CONFIG_GPIO_PCF857X is not set -# CONFIG_GPIO_SX150X is not set -# CONFIG_GPIO_STMPE is not set -# CONFIG_GPIO_ADP5588 is not set -# CONFIG_GPIO_ADNP is not set - -# -# PCI GPIO expanders: -# -# CONFIG_GPIO_BT8XX is not set -# CONFIG_GPIO_AMD8111 is not set -# CONFIG_GPIO_ML_IOH is not set -# CONFIG_GPIO_RDC321X is not set - -# -# SPI GPIO expanders: -# -# CONFIG_GPIO_MAX7301 is not set -# CONFIG_GPIO_MCP23S08 is not set -# CONFIG_GPIO_MC33880 is not set -# CONFIG_GPIO_74X164 is not set - -# -# AC97 GPIO expanders: -# - -# -# LPC GPIO expanders: -# - -# -# MODULbus GPIO expanders: -# -# CONFIG_GPIO_BCM_KONA is not set - -# -# USB GPIO expanders: -# -# CONFIG_W1 is not set -# CONFIG_POWER_SUPPLY is not set -# CONFIG_POWER_AVS is not set -# CONFIG_HWMON is not set -# CONFIG_THERMAL is not set -CONFIG_WATCHDOG=y -CONFIG_WATCHDOG_CORE=y -# CONFIG_WATCHDOG_NOWAYOUT is not set - -# -# Watchdog Device Drivers -# -# CONFIG_SOFT_WATCHDOG is not set -# CONFIG_DA9052_WATCHDOG is not set -# CONFIG_GPIO_WATCHDOG is not set -# CONFIG_XILINX_WATCHDOG is not set -# CONFIG_DW_WATCHDOG is not set -# CONFIG_MAX63XX_WATCHDOG is not set -CONFIG_IMX2_WDT=y -# CONFIG_ALIM7101_WDT is not set -# CONFIG_I6300ESB_WDT is not set -# CONFIG_MEN_A21_WDT is not set - -# -# PCI-based Watchdog Cards -# -# CONFIG_PCIPCWATCHDOG is not set -# CONFIG_WDTPCI is not set - -# -# USB-based Watchdog Cards -# -# CONFIG_USBPCWATCHDOG is not set -CONFIG_SSB_POSSIBLE=y - -# -# Sonics Silicon Backplane -# -# CONFIG_SSB is not set -CONFIG_BCMA_POSSIBLE=y - -# -# Broadcom specific AMBA -# -# CONFIG_BCMA is not set - -# -# Multifunction device drivers -# -CONFIG_MFD_CORE=y -# CONFIG_MFD_AS3711 is not set -# CONFIG_MFD_AS3722 is not set -# CONFIG_PMIC_ADP5520 is not set -# CONFIG_MFD_AAT2870_CORE is not set -# CONFIG_MFD_BCM590XX is not set -# CONFIG_MFD_AXP20X is not set -# CONFIG_MFD_CROS_EC is not set -# CONFIG_MFD_ASIC3 is not set -# CONFIG_PMIC_DA903X is not set -CONFIG_PMIC_DA9052=y -# CONFIG_MFD_DA9052_SPI is not set -CONFIG_MFD_DA9052_I2C=y -# CONFIG_MFD_DA9055 is not set -# CONFIG_MFD_DA9063 is not set -CONFIG_MFD_MC13XXX=y -CONFIG_MFD_MC13XXX_SPI=y -CONFIG_MFD_MC13XXX_I2C=y -# CONFIG_HTC_EGPIO is not set -# CONFIG_HTC_PASIC3 is not set -# CONFIG_HTC_I2CPLD is not set -# CONFIG_LPC_ICH is not set -# CONFIG_LPC_SCH is not set -# CONFIG_MFD_JANZ_CMODIO is not set -# CONFIG_MFD_KEMPLD is not set -# CONFIG_MFD_88PM800 is not set -# CONFIG_MFD_88PM805 is not set -# CONFIG_MFD_88PM860X is not set -# CONFIG_MFD_MAX14577 is not set -# CONFIG_MFD_MAX77686 is not set -# CONFIG_MFD_MAX77693 is not set -# CONFIG_MFD_MAX8907 is not set -# CONFIG_MFD_MAX8925 is not set -# CONFIG_MFD_MAX8997 is not set -# CONFIG_MFD_MAX8998 is not set -# CONFIG_EZX_PCAP is not set -# CONFIG_MFD_VIPERBOARD is not set -# CONFIG_MFD_RETU is not set -# CONFIG_MFD_PCF50633 is not set -# CONFIG_UCB1400_CORE is not set -# CONFIG_MFD_PM8921_CORE is not set -# CONFIG_MFD_RDC321X is not set -# CONFIG_MFD_RTSX_PCI is not set -# CONFIG_MFD_RTSX_USB is not set -# CONFIG_MFD_RC5T583 is not set -# CONFIG_MFD_SEC_CORE is not set -# CONFIG_MFD_SI476X_CORE is not set -# CONFIG_MFD_SM501 is not set -# CONFIG_MFD_SMSC is not set -# CONFIG_ABX500_CORE is not set -CONFIG_MFD_STMPE=y - -# -# STMicroelectronics STMPE Interface Drivers -# -CONFIG_STMPE_I2C=y -# CONFIG_STMPE_SPI is not set -CONFIG_MFD_SYSCON=y -# CONFIG_MFD_TI_AM335X_TSCADC is not set -# CONFIG_MFD_LP3943 is not set -# CONFIG_MFD_LP8788 is not set -# CONFIG_MFD_PALMAS is not set -# CONFIG_TPS6105X is not set -# CONFIG_TPS65010 is not set -# CONFIG_TPS6507X is not set -# CONFIG_MFD_TPS65090 is not set -# CONFIG_MFD_TPS65217 is not set -# CONFIG_MFD_TPS65218 is not set -# CONFIG_MFD_TPS6586X is not set -# CONFIG_MFD_TPS65910 is not set -# CONFIG_MFD_TPS65912 is not set -# CONFIG_MFD_TPS65912_I2C is not set -# CONFIG_MFD_TPS65912_SPI is not set -# CONFIG_MFD_TPS80031 is not set -# CONFIG_TWL4030_CORE is not set -# CONFIG_TWL6040_CORE is not set -# CONFIG_MFD_WL1273_CORE is not set -# CONFIG_MFD_LM3533 is not set -# CONFIG_MFD_TIMBERDALE is not set -# CONFIG_MFD_TC3589X is not set -# CONFIG_MFD_TMIO is not set -# CONFIG_MFD_T7L66XB is not set -# CONFIG_MFD_TC6387XB is not set -# CONFIG_MFD_TC6393XB is not set -# CONFIG_MFD_VX855 is not set -# CONFIG_MFD_ARIZONA_I2C is not set -# CONFIG_MFD_ARIZONA_SPI is not set -# CONFIG_MFD_WM8400 is not set -# CONFIG_MFD_WM831X_I2C is not set -# CONFIG_MFD_WM831X_SPI is not set -# CONFIG_MFD_WM8350_I2C is not set -# CONFIG_MFD_WM8994 is not set -CONFIG_REGULATOR=y -# CONFIG_REGULATOR_DEBUG is not set -CONFIG_REGULATOR_FIXED_VOLTAGE=y -# CONFIG_REGULATOR_VIRTUAL_CONSUMER is not set -# CONFIG_REGULATOR_USERSPACE_CONSUMER is not set -# CONFIG_REGULATOR_ACT8865 is not set -# CONFIG_REGULATOR_AD5398 is not set -CONFIG_REGULATOR_ANATOP=y -CONFIG_REGULATOR_DA9052=y -# CONFIG_REGULATOR_DA9210 is not set -# CONFIG_REGULATOR_FAN53555 is not set -CONFIG_REGULATOR_GPIO=y -# CONFIG_REGULATOR_ISL6271A is not set -# CONFIG_REGULATOR_LP3971 is not set -# CONFIG_REGULATOR_LP3972 is not set -# CONFIG_REGULATOR_LP872X is not set -# CONFIG_REGULATOR_LP8755 is not set -# CONFIG_REGULATOR_LTC3589 is not set -# CONFIG_REGULATOR_MAX1586 is not set -# CONFIG_REGULATOR_MAX8649 is not set -# CONFIG_REGULATOR_MAX8660 is not set -# CONFIG_REGULATOR_MAX8952 is not set -# CONFIG_REGULATOR_MAX8973 is not set -CONFIG_REGULATOR_MC13XXX_CORE=y -CONFIG_REGULATOR_MC13783=y -CONFIG_REGULATOR_MC13892=y -CONFIG_REGULATOR_PFUZE100=y -# CONFIG_REGULATOR_TPS51632 is not set -# CONFIG_REGULATOR_TPS62360 is not set -# CONFIG_REGULATOR_TPS65023 is not set -# CONFIG_REGULATOR_TPS6507X is not set -# CONFIG_REGULATOR_TPS6524X is not set -CONFIG_MEDIA_SUPPORT=y - -# -# Multimedia core support -# -CONFIG_MEDIA_CAMERA_SUPPORT=y -# CONFIG_MEDIA_ANALOG_TV_SUPPORT is not set -# CONFIG_MEDIA_DIGITAL_TV_SUPPORT is not set -# CONFIG_MEDIA_RADIO_SUPPORT is not set -CONFIG_MEDIA_RC_SUPPORT=y -# CONFIG_MEDIA_CONTROLLER is not set -CONFIG_VIDEO_DEV=y -CONFIG_VIDEO_V4L2=y -# CONFIG_VIDEO_ADV_DEBUG is not set -# CONFIG_VIDEO_FIXED_MINOR_RANGES is not set -CONFIG_V4L2_MEM2MEM_DEV=y -CONFIG_VIDEOBUF_GEN=y -CONFIG_VIDEOBUF2_CORE=y -CONFIG_VIDEOBUF2_MEMOPS=y -CONFIG_VIDEOBUF2_DMA_CONTIG=y -# CONFIG_TTPCI_EEPROM is not set - -# -# Media drivers -# -CONFIG_RC_CORE=y -CONFIG_RC_MAP=y -CONFIG_RC_DECODERS=y -# CONFIG_LIRC is not set -CONFIG_IR_NEC_DECODER=y -CONFIG_IR_RC5_DECODER=y -CONFIG_IR_RC6_DECODER=y -CONFIG_IR_JVC_DECODER=y -CONFIG_IR_SONY_DECODER=y -CONFIG_IR_RC5_SZ_DECODER=y -CONFIG_IR_SANYO_DECODER=y -CONFIG_IR_SHARP_DECODER=y -CONFIG_IR_MCE_KBD_DECODER=y -CONFIG_RC_DEVICES=y -# CONFIG_RC_ATI_REMOTE is not set -# CONFIG_IR_IMON is not set -# CONFIG_IR_MCEUSB is not set -# CONFIG_IR_REDRAT3 is not set -# CONFIG_IR_STREAMZAP is not set -# CONFIG_IR_IGUANA is not set -# CONFIG_IR_TTUSBIR is not set -# CONFIG_IR_IMG is not set -# CONFIG_RC_LOOPBACK is not set -CONFIG_IR_GPIO_CIR=y -# CONFIG_MEDIA_USB_SUPPORT is not set -# CONFIG_MEDIA_PCI_SUPPORT is not set -CONFIG_V4L_PLATFORM_DRIVERS=y -# CONFIG_VIDEO_CAFE_CCIC is not set -CONFIG_SOC_CAMERA=y -# CONFIG_SOC_CAMERA_PLATFORM is not set -CONFIG_VIDEO_MX3=y -# CONFIG_VIDEO_RCAR_VIN is not set -# CONFIG_VIDEO_SH_MOBILE_CSI2 is not set -# CONFIG_VIDEO_SH_MOBILE_CEU is not set -CONFIG_V4L_MEM2MEM_DRIVERS=y -CONFIG_VIDEO_CODA=y -# CONFIG_VIDEO_MEM2MEM_DEINTERLACE is not set -# CONFIG_VIDEO_SH_VEU is not set -# CONFIG_V4L_TEST_DRIVERS is not set - -# -# Supported MMC/SDIO adapters -# -# CONFIG_CYPRESS_FIRMWARE is not set - -# -# Media ancillary drivers (tuners, sensors, i2c, frontends) -# -CONFIG_MEDIA_SUBDRV_AUTOSELECT=y -CONFIG_VIDEO_IR_I2C=y - -# -# Audio decoders, processors and mixers -# - -# -# RDS decoders -# - -# -# Video decoders -# - -# -# Video and audio decoders -# - -# -# Video encoders -# - -# -# Camera sensor devices -# - -# -# Flash devices -# - -# -# Video improvement chips -# - -# -# Audio/Video compression chips -# - -# -# Miscellaneous helper chips -# - -# -# Sensors used on soc_camera driver -# - -# -# soc_camera sensor drivers -# -# CONFIG_SOC_CAMERA_IMX074 is not set -# CONFIG_SOC_CAMERA_MT9M001 is not set -# CONFIG_SOC_CAMERA_MT9M111 is not set -# CONFIG_SOC_CAMERA_MT9T031 is not set -# CONFIG_SOC_CAMERA_MT9T112 is not set -# CONFIG_SOC_CAMERA_MT9V022 is not set -CONFIG_SOC_CAMERA_OV2640=y -# CONFIG_SOC_CAMERA_OV5642 is not set -# CONFIG_SOC_CAMERA_OV6650 is not set -# CONFIG_SOC_CAMERA_OV772X is not set -# CONFIG_SOC_CAMERA_OV9640 is not set -# CONFIG_SOC_CAMERA_OV9740 is not set -# CONFIG_SOC_CAMERA_RJ54N1 is not set -# CONFIG_SOC_CAMERA_TW9910 is not set - -# -# Tools to develop new frontends -# -# CONFIG_DVB_DUMMY_FE is not set - -# -# Graphics support -# -CONFIG_VGA_ARB=y -CONFIG_VGA_ARB_MAX_GPUS=16 -CONFIG_IMX_IPUV3_CORE=y - -# -# Direct Rendering Manager -# -CONFIG_DRM=y -CONFIG_DRM_KMS_HELPER=y -CONFIG_DRM_KMS_FB_HELPER=y -# CONFIG_DRM_LOAD_EDID_FIRMWARE is not set -CONFIG_DRM_GEM_CMA_HELPER=y -CONFIG_DRM_KMS_CMA_HELPER=y - -# -# I2C encoder or helper chips -# -# CONFIG_DRM_I2C_CH7006 is not set -# CONFIG_DRM_I2C_SIL164 is not set -# CONFIG_DRM_I2C_NXP_TDA998X is not set -# CONFIG_DRM_PTN3460 is not set -# CONFIG_DRM_TDFX is not set -# CONFIG_DRM_R128 is not set -# CONFIG_DRM_RADEON is not set -# CONFIG_DRM_NOUVEAU is not set -# CONFIG_DRM_MGA is not set -# CONFIG_DRM_VIA is not set -# CONFIG_DRM_SAVAGE is not set -# CONFIG_DRM_EXYNOS is not set -# CONFIG_DRM_VMWGFX is not set -# CONFIG_DRM_UDL is not set -# CONFIG_DRM_AST is not set -# CONFIG_DRM_MGAG200 is not set -# CONFIG_DRM_CIRRUS_QEMU is not set -# CONFIG_DRM_ARMADA is not set -# CONFIG_DRM_TILCDC is not set -# CONFIG_DRM_QXL is not set -# CONFIG_DRM_BOCHS is not set -CONFIG_DRM_PANEL=y - -# -# Display Panels -# -CONFIG_DRM_PANEL_SIMPLE=y -# CONFIG_DRM_PANEL_LD9040 is not set -# CONFIG_DRM_PANEL_S6E8AA0 is not set - -# -# Frame buffer Devices -# -CONFIG_FB=y -# CONFIG_FIRMWARE_EDID is not set -# CONFIG_FB_DDC is not set -# CONFIG_FB_BOOT_VESA_SUPPORT is not set -CONFIG_FB_CFB_FILLRECT=y -CONFIG_FB_CFB_COPYAREA=y -CONFIG_FB_CFB_IMAGEBLIT=y -# CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set -CONFIG_FB_SYS_FILLRECT=y -CONFIG_FB_SYS_COPYAREA=y -CONFIG_FB_SYS_IMAGEBLIT=y -# CONFIG_FB_FOREIGN_ENDIAN is not set -# CONFIG_FB_SYS_FOPS is not set -# CONFIG_FB_SVGALIB is not set -# CONFIG_FB_MACMODES is not set -# CONFIG_FB_BACKLIGHT is not set -# CONFIG_FB_MODE_HELPERS is not set -# CONFIG_FB_TILEBLITTING is not set - -# -# Frame buffer hardware drivers -# -# CONFIG_FB_CIRRUS is not set -# CONFIG_FB_PM2 is not set -# CONFIG_FB_IMX is not set -# CONFIG_FB_CYBER2000 is not set -# CONFIG_FB_ASILIANT is not set -# CONFIG_FB_IMSTT is not set -# CONFIG_FB_UVESA is not set -# CONFIG_FB_OPENCORES is not set -# CONFIG_FB_S1D13XXX is not set -# CONFIG_FB_NVIDIA is not set -# CONFIG_FB_RIVA is not set -# CONFIG_FB_I740 is not set -# CONFIG_FB_MATROX is not set -# CONFIG_FB_RADEON is not set -# CONFIG_FB_ATY128 is not set -# CONFIG_FB_ATY is not set -# CONFIG_FB_S3 is not set -# CONFIG_FB_SAVAGE is not set -# CONFIG_FB_SIS is not set -# CONFIG_FB_NEOMAGIC is not set -# CONFIG_FB_KYRO is not set -# CONFIG_FB_3DFX is not set -# CONFIG_FB_VOODOO1 is not set -# CONFIG_FB_VT8623 is not set -# CONFIG_FB_TRIDENT is not set -# CONFIG_FB_ARK is not set -# CONFIG_FB_PM3 is not set -# CONFIG_FB_CARMINE is not set -# CONFIG_FB_SMSCUFX is not set -# CONFIG_FB_UDL is not set -# CONFIG_FB_VIRTUAL is not set -# CONFIG_FB_METRONOME is not set -# CONFIG_FB_MB862XX is not set -CONFIG_FB_MX3=y -# CONFIG_FB_BROADSHEET is not set -# CONFIG_FB_AUO_K190X is not set -# CONFIG_FB_SIMPLE is not set -# CONFIG_FB_SSD1307 is not set -CONFIG_BACKLIGHT_LCD_SUPPORT=y -CONFIG_LCD_CLASS_DEVICE=y -CONFIG_LCD_L4F00242T03=y -# CONFIG_LCD_LMS283GF05 is not set -# CONFIG_LCD_LTV350QV is not set -# CONFIG_LCD_ILI922X is not set -# CONFIG_LCD_ILI9320 is not set -# CONFIG_LCD_TDO24M is not set -# CONFIG_LCD_VGG2432A4 is not set -CONFIG_LCD_PLATFORM=y -# CONFIG_LCD_S6E63M0 is not set -# CONFIG_LCD_LD9040 is not set -# CONFIG_LCD_AMS369FG06 is not set -# CONFIG_LCD_LMS501KF03 is not set -# CONFIG_LCD_HX8357 is not set -CONFIG_BACKLIGHT_CLASS_DEVICE=y -CONFIG_BACKLIGHT_GENERIC=y -CONFIG_BACKLIGHT_PWM=y -# CONFIG_BACKLIGHT_DA9052 is not set -# CONFIG_BACKLIGHT_ADP8860 is not set -# CONFIG_BACKLIGHT_ADP8870 is not set -# CONFIG_BACKLIGHT_LM3630A is not set -# CONFIG_BACKLIGHT_LM3639 is not set -# CONFIG_BACKLIGHT_LP855X is not set -CONFIG_BACKLIGHT_GPIO=y -# CONFIG_BACKLIGHT_LV5207LP is not set -# CONFIG_BACKLIGHT_BD6107 is not set -# CONFIG_VGASTATE is not set -CONFIG_VIDEOMODE_HELPERS=y -CONFIG_HDMI=y - -# -# Console display driver support -# -CONFIG_DUMMY_CONSOLE=y -CONFIG_FRAMEBUFFER_CONSOLE=y -CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY=y -# CONFIG_FRAMEBUFFER_CONSOLE_ROTATION is not set -CONFIG_LOGO=y -CONFIG_LOGO_LINUX_MONO=y -CONFIG_LOGO_LINUX_VGA16=y -CONFIG_LOGO_LINUX_CLUT224=y -CONFIG_SOUND=y -# CONFIG_SOUND_OSS_CORE is not set -CONFIG_SND=y -CONFIG_SND_TIMER=y -CONFIG_SND_PCM=y -CONFIG_SND_DMAENGINE_PCM=y -CONFIG_SND_COMPRESS_OFFLOAD=y -CONFIG_SND_JACK=y -# CONFIG_SND_SEQUENCER is not set -# CONFIG_SND_MIXER_OSS is not set -# CONFIG_SND_PCM_OSS is not set -# CONFIG_SND_HRTIMER is not set -# CONFIG_SND_DYNAMIC_MINORS is not set -CONFIG_SND_SUPPORT_OLD_API=y -CONFIG_SND_VERBOSE_PROCFS=y -# CONFIG_SND_VERBOSE_PRINTK is not set -# CONFIG_SND_DEBUG is not set -# CONFIG_SND_RAWMIDI_SEQ is not set -# CONFIG_SND_OPL3_LIB_SEQ is not set -# CONFIG_SND_OPL4_LIB_SEQ is not set -# CONFIG_SND_SBAWE_SEQ is not set -# CONFIG_SND_EMU10K1_SEQ is not set -CONFIG_SND_DRIVERS=y -# CONFIG_SND_DUMMY is not set -# CONFIG_SND_ALOOP is not set -# CONFIG_SND_MTPAV is not set -# CONFIG_SND_SERIAL_U16550 is not set -# CONFIG_SND_MPU401 is not set -CONFIG_SND_PCI=y -# CONFIG_SND_AD1889 is not set -# CONFIG_SND_ALS300 is not set -# CONFIG_SND_ALI5451 is not set -# CONFIG_SND_ATIIXP is not set -# CONFIG_SND_ATIIXP_MODEM is not set -# CONFIG_SND_AU8810 is not set -# CONFIG_SND_AU8820 is not set -# CONFIG_SND_AU8830 is not set -# CONFIG_SND_AW2 is not set -# CONFIG_SND_AZT3328 is not set -# CONFIG_SND_BT87X is not set -# CONFIG_SND_CA0106 is not set -# CONFIG_SND_CMIPCI is not set -# CONFIG_SND_OXYGEN is not set -# CONFIG_SND_CS4281 is not set -# CONFIG_SND_CS46XX is not set -# CONFIG_SND_CTXFI is not set -# CONFIG_SND_DARLA20 is not set -# CONFIG_SND_GINA20 is not set -# CONFIG_SND_LAYLA20 is not set -# CONFIG_SND_DARLA24 is not set -# CONFIG_SND_GINA24 is not set -# CONFIG_SND_LAYLA24 is not set -# CONFIG_SND_MONA is not set -# CONFIG_SND_MIA is not set -# CONFIG_SND_ECHO3G is not set -# CONFIG_SND_INDIGO is not set -# CONFIG_SND_INDIGOIO is not set -# CONFIG_SND_INDIGODJ is not set -# CONFIG_SND_INDIGOIOX is not set -# CONFIG_SND_INDIGODJX is not set -# CONFIG_SND_EMU10K1 is not set -# CONFIG_SND_EMU10K1X is not set -# CONFIG_SND_ENS1370 is not set -# CONFIG_SND_ENS1371 is not set -# CONFIG_SND_ES1938 is not set -# CONFIG_SND_ES1968 is not set -# CONFIG_SND_FM801 is not set -# CONFIG_SND_HDSP is not set -# CONFIG_SND_HDSPM is not set -# CONFIG_SND_ICE1712 is not set -# CONFIG_SND_ICE1724 is not set -# CONFIG_SND_INTEL8X0 is not set -# CONFIG_SND_INTEL8X0M is not set -# CONFIG_SND_KORG1212 is not set -# CONFIG_SND_LOLA is not set -# CONFIG_SND_LX6464ES is not set -# CONFIG_SND_MAESTRO3 is not set -# CONFIG_SND_MIXART is not set -# CONFIG_SND_NM256 is not set -# CONFIG_SND_PCXHR is not set -# CONFIG_SND_RIPTIDE is not set -# CONFIG_SND_RME32 is not set -# CONFIG_SND_RME96 is not set -# CONFIG_SND_RME9652 is not set -# CONFIG_SND_SONICVIBES is not set -# CONFIG_SND_TRIDENT is not set -# CONFIG_SND_VIA82XX is not set -# CONFIG_SND_VIA82XX_MODEM is not set -# CONFIG_SND_VIRTUOSO is not set -# CONFIG_SND_VX222 is not set -# CONFIG_SND_YMFPCI is not set - -# -# HD-Audio -# -# CONFIG_SND_HDA_INTEL is not set -CONFIG_SND_ARM=y -CONFIG_SND_SPI=y -CONFIG_SND_USB=y -# CONFIG_SND_USB_AUDIO is not set -# CONFIG_SND_USB_UA101 is not set -# CONFIG_SND_USB_CAIAQ is not set -# CONFIG_SND_USB_6FIRE is not set -# CONFIG_SND_USB_HIFACE is not set -# CONFIG_SND_BCD2000 is not set -CONFIG_SND_SOC=y -CONFIG_SND_SOC_AC97_BUS=y -CONFIG_SND_SOC_GENERIC_DMAENGINE_PCM=y -# CONFIG_SND_ATMEL_SOC is not set -# CONFIG_SND_DESIGNWARE_I2S is not set - -# -# SoC Audio for Freescale CPUs -# - -# -# Common SoC Audio options for Freescale CPUs: -# -# CONFIG_SND_SOC_FSL_SAI is not set -CONFIG_SND_SOC_FSL_SSI=y -CONFIG_SND_SOC_FSL_SPDIF=y -# CONFIG_SND_SOC_FSL_ESAI is not set -CONFIG_SND_SOC_FSL_UTILS=y -CONFIG_SND_SOC_IMX_PCM_DMA=y -CONFIG_SND_SOC_IMX_AUDMUX=y -CONFIG_SND_IMX_SOC=y -CONFIG_SND_SOC_IMX_SSI=y -CONFIG_SND_SOC_IMX_PCM_FIQ=y - -# -# SoC Audio support for Freescale i.MX boards: -# -CONFIG_SND_SOC_PHYCORE_AC97=y -CONFIG_SND_SOC_EUKREA_TLV320=y -CONFIG_SND_SOC_IMX_WM8962=y -CONFIG_SND_SOC_IMX_SGTL5000=y -CONFIG_SND_SOC_IMX_SPDIF=y -CONFIG_SND_SOC_IMX_MC13783=y -CONFIG_SND_SOC_I2C_AND_SPI=y - -# -# CODEC drivers -# -# CONFIG_SND_SOC_ADAU1701 is not set -# CONFIG_SND_SOC_AK4104 is not set -# CONFIG_SND_SOC_AK4554 is not set -# CONFIG_SND_SOC_AK4642 is not set -# CONFIG_SND_SOC_AK5386 is not set -# CONFIG_SND_SOC_ALC5623 is not set -# CONFIG_SND_SOC_CS42L52 is not set -# CONFIG_SND_SOC_CS42L56 is not set -# CONFIG_SND_SOC_CS42L73 is not set -# CONFIG_SND_SOC_CS4270 is not set -# CONFIG_SND_SOC_CS4271 is not set -# CONFIG_SND_SOC_CS42XX8_I2C is not set -# CONFIG_SND_SOC_HDMI_CODEC is not set -# CONFIG_SND_SOC_PCM1681 is not set -# CONFIG_SND_SOC_PCM1792A is not set -# CONFIG_SND_SOC_PCM512x_I2C is not set -# CONFIG_SND_SOC_PCM512x_SPI is not set -CONFIG_SND_SOC_SGTL5000=y -# CONFIG_SND_SOC_SIRF_AUDIO_CODEC is not set -# CONFIG_SND_SOC_SPDIF is not set -# CONFIG_SND_SOC_STA350 is not set -# CONFIG_SND_SOC_TAS5086 is not set -CONFIG_SND_SOC_TLV320AIC23=y -CONFIG_SND_SOC_TLV320AIC23_I2C=y -# CONFIG_SND_SOC_TLV320AIC3X is not set -# CONFIG_SND_SOC_WM8510 is not set -# CONFIG_SND_SOC_WM8523 is not set -# CONFIG_SND_SOC_WM8580 is not set -# CONFIG_SND_SOC_WM8711 is not set -# CONFIG_SND_SOC_WM8728 is not set -# CONFIG_SND_SOC_WM8731 is not set -# CONFIG_SND_SOC_WM8737 is not set -# CONFIG_SND_SOC_WM8741 is not set -# CONFIG_SND_SOC_WM8750 is not set -# CONFIG_SND_SOC_WM8753 is not set -# CONFIG_SND_SOC_WM8770 is not set -# CONFIG_SND_SOC_WM8776 is not set -# CONFIG_SND_SOC_WM8804 is not set -# CONFIG_SND_SOC_WM8903 is not set -CONFIG_SND_SOC_WM8962=y -CONFIG_SND_SOC_WM9712=y -CONFIG_SND_SOC_MC13783=y -# CONFIG_SND_SOC_TPA6130A2 is not set -# CONFIG_SND_SIMPLE_CARD is not set -# CONFIG_SOUND_PRIME is not set -CONFIG_AC97_BUS=y - -# -# HID support -# -CONFIG_HID=y -# CONFIG_HIDRAW is not set -# CONFIG_UHID is not set -CONFIG_HID_GENERIC=y - -# -# Special HID drivers -# -# CONFIG_HID_A4TECH is not set -# CONFIG_HID_ACRUX is not set -# CONFIG_HID_APPLE is not set -# CONFIG_HID_APPLEIR is not set -# CONFIG_HID_AUREAL is not set -# CONFIG_HID_BELKIN is not set -# CONFIG_HID_CHERRY is not set -# CONFIG_HID_CHICONY is not set -# CONFIG_HID_PRODIKEYS is not set -# CONFIG_HID_CP2112 is not set -# CONFIG_HID_CYPRESS is not set -# CONFIG_HID_DRAGONRISE is not set -# CONFIG_HID_EMS_FF is not set -# CONFIG_HID_ELECOM is not set -# CONFIG_HID_ELO is not set -# CONFIG_HID_EZKEY is not set -# CONFIG_HID_HOLTEK is not set -# CONFIG_HID_HUION is not set -# CONFIG_HID_KEYTOUCH is not set -# CONFIG_HID_KYE is not set -# CONFIG_HID_UCLOGIC is not set -# CONFIG_HID_WALTOP is not set -# CONFIG_HID_GYRATION is not set -# CONFIG_HID_ICADE is not set -# CONFIG_HID_TWINHAN is not set -# CONFIG_HID_KENSINGTON is not set -# CONFIG_HID_LCPOWER is not set -# CONFIG_HID_LENOVO_TPKBD is not set -# CONFIG_HID_LOGITECH is not set -# CONFIG_HID_MAGICMOUSE is not set -# CONFIG_HID_MICROSOFT is not set -# CONFIG_HID_MONTEREY is not set -# CONFIG_HID_MULTITOUCH is not set -# CONFIG_HID_NTRIG is not set -# CONFIG_HID_ORTEK is not set -# CONFIG_HID_PANTHERLORD is not set -# CONFIG_HID_PETALYNX is not set -# CONFIG_HID_PICOLCD is not set -# CONFIG_HID_PRIMAX is not set -# CONFIG_HID_ROCCAT is not set -# CONFIG_HID_SAITEK is not set -# CONFIG_HID_SAMSUNG is not set -# CONFIG_HID_SONY is not set -# CONFIG_HID_SPEEDLINK is not set -# CONFIG_HID_STEELSERIES is not set -# CONFIG_HID_SUNPLUS is not set -# CONFIG_HID_RMI is not set -# CONFIG_HID_GREENASIA is not set -# CONFIG_HID_SMARTJOYPLUS is not set -# CONFIG_HID_TIVO is not set -# CONFIG_HID_TOPSEED is not set -# CONFIG_HID_THINGM is not set -# CONFIG_HID_THRUSTMASTER is not set -# CONFIG_HID_WACOM is not set -# CONFIG_HID_WIIMOTE is not set -# CONFIG_HID_XINMO is not set -# CONFIG_HID_ZEROPLUS is not set -# CONFIG_HID_ZYDACRON is not set -# CONFIG_HID_SENSOR_HUB is not set - -# -# USB HID support -# -CONFIG_USB_HID=y -# CONFIG_HID_PID is not set -# CONFIG_USB_HIDDEV is not set - -# -# I2C HID support -# -# CONFIG_I2C_HID is not set -CONFIG_USB_OHCI_LITTLE_ENDIAN=y -CONFIG_USB_SUPPORT=y -CONFIG_USB_COMMON=y -CONFIG_USB_ARCH_HAS_HCD=y -CONFIG_USB=y -# CONFIG_USB_ANNOUNCE_NEW_DEVICES is not set - -# -# Miscellaneous USB options -# -CONFIG_USB_DEFAULT_PERSIST=y -# CONFIG_USB_DYNAMIC_MINORS is not set -# CONFIG_USB_OTG is not set -# CONFIG_USB_OTG_WHITELIST is not set -# CONFIG_USB_OTG_BLACKLIST_HUB is not set -# CONFIG_USB_OTG_FSM is not set -# CONFIG_USB_MON is not set -# CONFIG_USB_WUSB_CBAF is not set - -# -# USB Host Controller Drivers -# -# CONFIG_USB_C67X00_HCD is not set -# CONFIG_USB_XHCI_HCD is not set -CONFIG_USB_EHCI_HCD=y -CONFIG_USB_EHCI_ROOT_HUB_TT=y -CONFIG_USB_EHCI_TT_NEWSCHED=y -CONFIG_USB_EHCI_PCI=y -CONFIG_USB_EHCI_MXC=y -# CONFIG_USB_EHCI_HCD_PLATFORM is not set -# CONFIG_USB_OXU210HP_HCD is not set -# CONFIG_USB_ISP116X_HCD is not set -# CONFIG_USB_ISP1760_HCD is not set -# CONFIG_USB_ISP1362_HCD is not set -# CONFIG_USB_FUSBH200_HCD is not set -# CONFIG_USB_FOTG210_HCD is not set -# CONFIG_USB_MAX3421_HCD is not set -# CONFIG_USB_OHCI_HCD is not set -# CONFIG_USB_UHCI_HCD is not set -# CONFIG_USB_SL811_HCD is not set -# CONFIG_USB_R8A66597_HCD is not set -# CONFIG_USB_IMX21_HCD is not set -# CONFIG_USB_HCD_TEST_MODE is not set -# CONFIG_USB_RENESAS_USBHS is not set - -# -# USB Device Class drivers -# -# CONFIG_USB_ACM is not set -# CONFIG_USB_PRINTER is not set -# CONFIG_USB_WDM is not set -# CONFIG_USB_TMC is not set - -# -# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may -# - -# -# also be needed; see USB_STORAGE Help for more info -# -CONFIG_USB_STORAGE=y -# CONFIG_USB_STORAGE_DEBUG is not set -# CONFIG_USB_STORAGE_REALTEK is not set -# CONFIG_USB_STORAGE_DATAFAB is not set -# CONFIG_USB_STORAGE_FREECOM is not set -# CONFIG_USB_STORAGE_ISD200 is not set -# CONFIG_USB_STORAGE_USBAT is not set -# CONFIG_USB_STORAGE_SDDR09 is not set -# CONFIG_USB_STORAGE_SDDR55 is not set -# CONFIG_USB_STORAGE_JUMPSHOT is not set -# CONFIG_USB_STORAGE_ALAUDA is not set -# CONFIG_USB_STORAGE_ONETOUCH is not set -# CONFIG_USB_STORAGE_KARMA is not set -# CONFIG_USB_STORAGE_CYPRESS_ATACB is not set -# CONFIG_USB_STORAGE_ENE_UB6250 is not set -# CONFIG_USB_UAS is not set - -# -# USB Imaging devices -# -# CONFIG_USB_MDC800 is not set -# CONFIG_USB_MICROTEK is not set -# CONFIG_USB_MUSB_HDRC is not set -# CONFIG_USB_DWC3 is not set -# CONFIG_USB_DWC2 is not set -CONFIG_USB_CHIPIDEA=y -CONFIG_USB_CHIPIDEA_UDC=y -CONFIG_USB_CHIPIDEA_HOST=y -# CONFIG_USB_CHIPIDEA_DEBUG is not set - -# -# USB port drivers -# -# CONFIG_USB_SERIAL is not set - -# -# USB Miscellaneous drivers -# -# CONFIG_USB_EMI62 is not set -# CONFIG_USB_EMI26 is not set -# CONFIG_USB_ADUTUX is not set -# CONFIG_USB_SEVSEG is not set -# CONFIG_USB_RIO500 is not set -# CONFIG_USB_LEGOTOWER is not set -# CONFIG_USB_LCD is not set -# CONFIG_USB_LED is not set -# CONFIG_USB_CYPRESS_CY7C63 is not set -# CONFIG_USB_CYTHERM is not set -# CONFIG_USB_IDMOUSE is not set -# CONFIG_USB_FTDI_ELAN is not set -# CONFIG_USB_APPLEDISPLAY is not set -# CONFIG_USB_SISUSBVGA is not set -# CONFIG_USB_LD is not set -# CONFIG_USB_TRANCEVIBRATOR is not set -# CONFIG_USB_IOWARRIOR is not set -# CONFIG_USB_TEST is not set -# CONFIG_USB_EHSET_TEST_FIXTURE is not set -# CONFIG_USB_ISIGHTFW is not set -# CONFIG_USB_YUREX is not set -# CONFIG_USB_EZUSB_FX2 is not set -# CONFIG_USB_HSIC_USB3503 is not set - -# -# USB Physical Layer drivers -# -CONFIG_USB_PHY=y -CONFIG_NOP_USB_XCEIV=y -# CONFIG_AM335X_PHY_USB is not set -# CONFIG_SAMSUNG_USB2PHY is not set -# CONFIG_SAMSUNG_USB3PHY is not set -# CONFIG_USB_GPIO_VBUS is not set -# CONFIG_USB_ISP1301 is not set -CONFIG_USB_MXS_PHY=y -# CONFIG_USB_ULPI is not set -CONFIG_USB_GADGET=y -# CONFIG_USB_GADGET_DEBUG is not set -# CONFIG_USB_GADGET_DEBUG_FILES is not set -# CONFIG_USB_GADGET_DEBUG_FS is not set -CONFIG_USB_GADGET_VBUS_DRAW=2 -CONFIG_USB_GADGET_STORAGE_NUM_BUFFERS=2 - -# -# USB Peripheral Controller -# -# CONFIG_USB_FSL_USB2 is not set -# CONFIG_USB_FUSB300 is not set -# CONFIG_USB_FOTG210_UDC is not set -# CONFIG_USB_GR_UDC is not set -# CONFIG_USB_R8A66597 is not set -# CONFIG_USB_PXA27X is not set -# CONFIG_USB_MV_UDC is not set -# CONFIG_USB_MV_U3D is not set -# CONFIG_USB_M66592 is not set -# CONFIG_USB_AMD5536UDC is not set -# CONFIG_USB_NET2272 is not set -# CONFIG_USB_NET2280 is not set -# CONFIG_USB_GOKU is not set -# CONFIG_USB_EG20T is not set -# CONFIG_USB_DUMMY_HCD is not set -CONFIG_USB_LIBCOMPOSITE=m -CONFIG_USB_U_ETHER=m -CONFIG_USB_F_ECM=m -CONFIG_USB_F_SUBSET=m -CONFIG_USB_F_RNDIS=m -CONFIG_USB_F_MASS_STORAGE=m -# CONFIG_USB_CONFIGFS is not set -# CONFIG_USB_ZERO is not set -# CONFIG_USB_AUDIO is not set -CONFIG_USB_ETH=m -CONFIG_USB_ETH_RNDIS=y -# CONFIG_USB_ETH_EEM is not set -# CONFIG_USB_G_NCM is not set -# CONFIG_USB_GADGETFS is not set -# CONFIG_USB_FUNCTIONFS is not set -CONFIG_USB_MASS_STORAGE=m -# CONFIG_USB_G_SERIAL is not set -# CONFIG_USB_MIDI_GADGET is not set -# CONFIG_USB_G_PRINTER is not set -# CONFIG_USB_CDC_COMPOSITE is not set -# CONFIG_USB_G_ACM_MS is not set -# CONFIG_USB_G_MULTI is not set -# CONFIG_USB_G_HID is not set -# CONFIG_USB_G_DBGP is not set -# CONFIG_USB_G_WEBCAM is not set -# CONFIG_UWB is not set -CONFIG_MMC=y -# CONFIG_MMC_DEBUG is not set -# CONFIG_MMC_CLKGATE is not set - -# -# MMC/SD/SDIO Card Drivers -# -CONFIG_MMC_BLOCK=y -CONFIG_MMC_BLOCK_MINORS=8 -CONFIG_MMC_BLOCK_BOUNCE=y -# CONFIG_SDIO_UART is not set -# CONFIG_MMC_TEST is not set - -# -# MMC/SD/SDIO Host Controller Drivers -# -CONFIG_MMC_SDHCI=y -CONFIG_MMC_SDHCI_IO_ACCESSORS=y -# CONFIG_MMC_SDHCI_PCI is not set -CONFIG_MMC_SDHCI_PLTFM=y -# CONFIG_MMC_SDHCI_OF_ARASAN is not set -CONFIG_MMC_SDHCI_ESDHC_IMX=y -# CONFIG_MMC_SDHCI_PXAV3 is not set -# CONFIG_MMC_SDHCI_PXAV2 is not set -# CONFIG_MMC_MXC is not set -# CONFIG_MMC_TIFM_SD is not set -# CONFIG_MMC_CB710 is not set -# CONFIG_MMC_VIA_SDMMC is not set -# CONFIG_MMC_DW is not set -# CONFIG_MMC_VUB300 is not set -# CONFIG_MMC_USHC is not set -# CONFIG_MMC_USDHI6ROL0 is not set -# CONFIG_MEMSTICK is not set -CONFIG_LEDS_GPIO_REGISTER=y -CONFIG_NEW_LEDS=y -CONFIG_LEDS_CLASS=y - -# -# LED drivers -# -# CONFIG_LEDS_LM3530 is not set -# CONFIG_LEDS_LM3642 is not set -# CONFIG_LEDS_PCA9532 is not set -CONFIG_LEDS_GPIO=y -# CONFIG_LEDS_LP3944 is not set -# CONFIG_LEDS_LP5521 is not set -# CONFIG_LEDS_LP5523 is not set -# CONFIG_LEDS_LP5562 is not set -# CONFIG_LEDS_LP8501 is not set -# CONFIG_LEDS_PCA955X is not set -# CONFIG_LEDS_PCA963X is not set -# CONFIG_LEDS_DA9052 is not set -# CONFIG_LEDS_DAC124S085 is not set -# CONFIG_LEDS_PWM is not set -# CONFIG_LEDS_REGULATOR is not set -# CONFIG_LEDS_BD2802 is not set -# CONFIG_LEDS_LT3593 is not set -# CONFIG_LEDS_MC13783 is not set -# CONFIG_LEDS_TCA6507 is not set -# CONFIG_LEDS_LM355x is not set - -# -# LED driver for blink(1) USB RGB LED is under Special HID drivers (HID_THINGM) -# -# CONFIG_LEDS_BLINKM is not set - -# -# LED Triggers -# -CONFIG_LEDS_TRIGGERS=y -CONFIG_LEDS_TRIGGER_TIMER=y -CONFIG_LEDS_TRIGGER_ONESHOT=y -CONFIG_LEDS_TRIGGER_HEARTBEAT=y -CONFIG_LEDS_TRIGGER_BACKLIGHT=y -# CONFIG_LEDS_TRIGGER_CPU is not set -CONFIG_LEDS_TRIGGER_GPIO=y -# CONFIG_LEDS_TRIGGER_DEFAULT_ON is not set - -# -# iptables trigger is under Netfilter config (LED target) -# -# CONFIG_LEDS_TRIGGER_TRANSIENT is not set -# CONFIG_LEDS_TRIGGER_CAMERA is not set -# CONFIG_ACCESSIBILITY is not set -# CONFIG_INFINIBAND is not set -# CONFIG_EDAC is not set -CONFIG_RTC_LIB=y -CONFIG_RTC_CLASS=y -CONFIG_RTC_HCTOSYS=y -CONFIG_RTC_SYSTOHC=y -CONFIG_RTC_HCTOSYS_DEVICE="rtc0" -# CONFIG_RTC_DEBUG is not set - -# -# RTC interfaces -# -CONFIG_RTC_INTF_SYSFS=y -CONFIG_RTC_INTF_PROC=y -CONFIG_RTC_INTF_DEV=y -CONFIG_RTC_INTF_DEV_UIE_EMUL=y -# CONFIG_RTC_DRV_TEST is not set - -# -# I2C RTC drivers -# -# CONFIG_RTC_DRV_DS1307 is not set -# CONFIG_RTC_DRV_DS1374 is not set -# CONFIG_RTC_DRV_DS1672 is not set -# CONFIG_RTC_DRV_DS3232 is not set -# CONFIG_RTC_DRV_HYM8563 is not set -# CONFIG_RTC_DRV_MAX6900 is not set -# CONFIG_RTC_DRV_RS5C372 is not set -# CONFIG_RTC_DRV_ISL1208 is not set -# CONFIG_RTC_DRV_ISL12022 is not set -# CONFIG_RTC_DRV_ISL12057 is not set -# CONFIG_RTC_DRV_X1205 is not set -# CONFIG_RTC_DRV_PCF2127 is not set -# CONFIG_RTC_DRV_PCF8523 is not set -CONFIG_RTC_DRV_PCF8563=y -# CONFIG_RTC_DRV_PCF8583 is not set -# CONFIG_RTC_DRV_M41T80 is not set -# CONFIG_RTC_DRV_BQ32K is not set -# CONFIG_RTC_DRV_S35390A is not set -# CONFIG_RTC_DRV_FM3130 is not set -# CONFIG_RTC_DRV_RX8581 is not set -# CONFIG_RTC_DRV_RX8025 is not set -# CONFIG_RTC_DRV_EM3027 is not set -# CONFIG_RTC_DRV_RV3029C2 is not set - -# -# SPI RTC drivers -# -# CONFIG_RTC_DRV_M41T93 is not set -# CONFIG_RTC_DRV_M41T94 is not set -# CONFIG_RTC_DRV_DS1305 is not set -# CONFIG_RTC_DRV_DS1343 is not set -# CONFIG_RTC_DRV_DS1347 is not set -# CONFIG_RTC_DRV_DS1390 is not set -# CONFIG_RTC_DRV_MAX6902 is not set -# CONFIG_RTC_DRV_R9701 is not set -# CONFIG_RTC_DRV_RS5C348 is not set -# CONFIG_RTC_DRV_DS3234 is not set -# CONFIG_RTC_DRV_PCF2123 is not set -# CONFIG_RTC_DRV_RX4581 is not set -# CONFIG_RTC_DRV_MCP795 is not set - -# -# Platform RTC drivers -# -# CONFIG_RTC_DRV_CMOS is not set -# CONFIG_RTC_DRV_DS1286 is not set -# CONFIG_RTC_DRV_DS1511 is not set -# CONFIG_RTC_DRV_DS1553 is not set -# CONFIG_RTC_DRV_DS1742 is not set -# CONFIG_RTC_DRV_DA9052 is not set -# CONFIG_RTC_DRV_STK17TA8 is not set -# CONFIG_RTC_DRV_M48T86 is not set -# CONFIG_RTC_DRV_M48T35 is not set -# CONFIG_RTC_DRV_M48T59 is not set -# CONFIG_RTC_DRV_MSM6242 is not set -# CONFIG_RTC_DRV_BQ4802 is not set -# CONFIG_RTC_DRV_RP5C01 is not set -# CONFIG_RTC_DRV_V3020 is not set -# CONFIG_RTC_DRV_DS2404 is not set - -# -# on-CPU RTC drivers -# -# CONFIG_RTC_DRV_IMXDI is not set -CONFIG_RTC_DRV_MC13XXX=y -CONFIG_RTC_DRV_MXC=y -CONFIG_RTC_DRV_SNVS=y -# CONFIG_RTC_DRV_MOXART is not set -# CONFIG_RTC_DRV_XGENE is not set - -# -# HID Sensor RTC drivers -# -# CONFIG_RTC_DRV_HID_SENSOR_TIME is not set -CONFIG_DMADEVICES=y -# CONFIG_DMADEVICES_DEBUG is not set - -# -# DMA Devices -# -# CONFIG_DW_DMAC_CORE is not set -# CONFIG_DW_DMAC is not set -# CONFIG_DW_DMAC_PCI is not set -CONFIG_MX3_IPU=y -CONFIG_MX3_IPU_IRQS=4 -CONFIG_IMX_SDMA=y -# CONFIG_IMX_DMA is not set -CONFIG_MXS_DMA=y -# CONFIG_FSL_EDMA is not set -CONFIG_DMA_ENGINE=y -CONFIG_DMA_OF=y - -# -# DMA Clients -# -# CONFIG_ASYNC_TX_DMA is not set -# CONFIG_DMATEST is not set -# CONFIG_AUXDISPLAY is not set -# CONFIG_UIO is not set -# CONFIG_VIRT_DRIVERS is not set - -# -# Virtio drivers -# -# CONFIG_VIRTIO_PCI is not set -# CONFIG_VIRTIO_MMIO is not set - -# -# Microsoft Hyper-V guest support -# -CONFIG_STAGING=y -# CONFIG_ET131X is not set -# CONFIG_USBIP_CORE is not set -# CONFIG_W35UND is not set -# CONFIG_PRISM2_USB is not set -# CONFIG_COMEDI is not set -# CONFIG_RTL8192U is not set -# CONFIG_RTLLIB is not set -# CONFIG_R8712U is not set -# CONFIG_R8188EU is not set -# CONFIG_R8192EE is not set -# CONFIG_R8723AU is not set -# CONFIG_R8821AE is not set -# CONFIG_RTS5208 is not set -# CONFIG_TRANZPORT is not set -# CONFIG_IDE_PHISON is not set -# CONFIG_LINE6_USB is not set -# CONFIG_VT6655 is not set -# CONFIG_VT6656 is not set -# CONFIG_DX_SEP is not set -# CONFIG_CRYSTALHD is not set -# CONFIG_FB_XGI is not set -# CONFIG_USB_ENESTORAGE is not set -# CONFIG_BCM_WIMAX is not set -# CONFIG_FT1000 is not set - -# -# Speakup console speech -# -# CONFIG_SPEAKUP is not set -# CONFIG_TOUCHSCREEN_CLEARPAD_TM1217 is not set -# CONFIG_TOUCHSCREEN_SYNAPTICS_I2C_RMI4 is not set -# CONFIG_STAGING_MEDIA is not set - -# -# Android -# -# CONFIG_ANDROID is not set -# CONFIG_USB_WPAN_HCD is not set -# CONFIG_WIMAX_GDM72XX is not set -# CONFIG_LTE_GDM724X is not set -CONFIG_NET_VENDOR_SILICOM=y -# CONFIG_SBYPASS is not set -# CONFIG_BPCTL is not set -# CONFIG_CED1401 is not set -CONFIG_DRM_IMX=y -CONFIG_DRM_IMX_FB_HELPER=y -CONFIG_DRM_IMX_PARALLEL_DISPLAY=y -CONFIG_DRM_IMX_TVE=y -CONFIG_DRM_IMX_LDB=y -CONFIG_DRM_IMX_IPUV3=y -CONFIG_DRM_IMX_HDMI=y -# CONFIG_DGRP is not set -# CONFIG_MTD_SPINAND_MT29F is not set -# CONFIG_LUSTRE_FS is not set -# CONFIG_XILLYBUS is not set -# CONFIG_DGNC is not set -# CONFIG_DGAP is not set -# CONFIG_GS_FPGABOOT is not set - -# -# SOC (System On Chip) specific Drivers -# -CONFIG_CLKDEV_LOOKUP=y -CONFIG_HAVE_CLK_PREPARE=y -CONFIG_COMMON_CLK=y - -# -# Common Clock Framework -# -# CONFIG_COMMON_CLK_SI5351 is not set -# CONFIG_COMMON_CLK_SI570 is not set -# CONFIG_COMMON_CLK_QCOM is not set - -# -# Hardware Spinlock drivers -# -CONFIG_CLKSRC_OF=y -CONFIG_CLKSRC_MMIO=y -CONFIG_VF_PIT_TIMER=y -# CONFIG_SH_TIMER_CMT is not set -# CONFIG_SH_TIMER_MTU2 is not set -# CONFIG_SH_TIMER_TMU is not set -# CONFIG_EM_TIMER_STI is not set -# CONFIG_CLKSRC_VERSATILE is not set -# CONFIG_MAILBOX is not set -# CONFIG_IOMMU_SUPPORT is not set - -# -# Remoteproc drivers -# -# CONFIG_STE_MODEM_RPROC is not set - -# -# Rpmsg drivers -# -# CONFIG_PM_DEVFREQ is not set -# CONFIG_EXTCON is not set -# CONFIG_MEMORY is not set -# CONFIG_IIO is not set -# CONFIG_VME_BUS is not set -CONFIG_PWM=y -CONFIG_PWM_SYSFS=y -# CONFIG_PWM_FSL_FTM is not set -CONFIG_PWM_IMX=y -# CONFIG_PWM_PCA9685 is not set -CONFIG_IRQCHIP=y -CONFIG_ARM_GIC=y -# CONFIG_IPACK_BUS is not set -CONFIG_ARCH_HAS_RESET_CONTROLLER=y -CONFIG_RESET_CONTROLLER=y -# CONFIG_FMC is not set - -# -# PHY Subsystem -# -# CONFIG_GENERIC_PHY is not set -# CONFIG_BCM_KONA_USB2_PHY is not set -# CONFIG_PHY_SAMSUNG_USB2 is not set -# CONFIG_POWERCAP is not set -# CONFIG_MCB is not set - -# -# File systems -# -CONFIG_DCACHE_WORD_ACCESS=y -CONFIG_EXT2_FS=y -CONFIG_EXT2_FS_XATTR=y -CONFIG_EXT2_FS_POSIX_ACL=y -CONFIG_EXT2_FS_SECURITY=y -# CONFIG_EXT2_FS_XIP is not set -CONFIG_EXT3_FS=y -CONFIG_EXT3_DEFAULTS_TO_ORDERED=y -CONFIG_EXT3_FS_XATTR=y -CONFIG_EXT3_FS_POSIX_ACL=y -CONFIG_EXT3_FS_SECURITY=y -CONFIG_EXT4_FS=y -CONFIG_EXT4_FS_POSIX_ACL=y -CONFIG_EXT4_FS_SECURITY=y -# CONFIG_EXT4_DEBUG is not set -CONFIG_JBD=y -# CONFIG_JBD_DEBUG is not set -CONFIG_JBD2=y -# CONFIG_JBD2_DEBUG is not set -CONFIG_FS_MBCACHE=y -# CONFIG_REISERFS_FS is not set -# CONFIG_JFS_FS is not set -# CONFIG_XFS_FS is not set -# CONFIG_GFS2_FS is not set -# CONFIG_OCFS2_FS is not set -# CONFIG_BTRFS_FS is not set -# CONFIG_NILFS2_FS is not set -CONFIG_FS_POSIX_ACL=y -CONFIG_FILE_LOCKING=y -CONFIG_FSNOTIFY=y -CONFIG_DNOTIFY=y -CONFIG_INOTIFY_USER=y -# CONFIG_FANOTIFY is not set -CONFIG_QUOTA=y -CONFIG_QUOTA_NETLINK_INTERFACE=y -# CONFIG_PRINT_QUOTA_WARNING is not set -# CONFIG_QUOTA_DEBUG is not set -# CONFIG_QFMT_V1 is not set -# CONFIG_QFMT_V2 is not set -CONFIG_QUOTACTL=y -CONFIG_AUTOFS4_FS=y -CONFIG_FUSE_FS=y -# CONFIG_CUSE is not set - -# -# Caches -# -# CONFIG_FSCACHE is not set - -# -# CD-ROM/DVD Filesystems -# -CONFIG_ISO9660_FS=m -CONFIG_JOLIET=y -CONFIG_ZISOFS=y -CONFIG_UDF_FS=m -CONFIG_UDF_NLS=y - -# -# DOS/FAT/NT Filesystems -# -CONFIG_FAT_FS=y -CONFIG_MSDOS_FS=m -CONFIG_VFAT_FS=y -CONFIG_FAT_DEFAULT_CODEPAGE=437 -CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1" -# CONFIG_NTFS_FS is not set - -# -# Pseudo filesystems -# -CONFIG_PROC_FS=y -CONFIG_PROC_SYSCTL=y -CONFIG_PROC_PAGE_MONITOR=y -CONFIG_KERNFS=y -CONFIG_SYSFS=y -CONFIG_TMPFS=y -# CONFIG_TMPFS_POSIX_ACL is not set -# CONFIG_TMPFS_XATTR is not set -# CONFIG_HUGETLB_PAGE is not set -CONFIG_CONFIGFS_FS=m -CONFIG_MISC_FILESYSTEMS=y -# CONFIG_ADFS_FS is not set -# CONFIG_AFFS_FS is not set -# CONFIG_ECRYPT_FS is not set -# CONFIG_HFS_FS is not set -# CONFIG_HFSPLUS_FS is not set -# CONFIG_BEFS_FS is not set -# CONFIG_BFS_FS is not set -# CONFIG_EFS_FS is not set -CONFIG_JFFS2_FS=y -CONFIG_JFFS2_FS_DEBUG=0 -CONFIG_JFFS2_FS_WRITEBUFFER=y -# CONFIG_JFFS2_FS_WBUF_VERIFY is not set -# CONFIG_JFFS2_SUMMARY is not set -# CONFIG_JFFS2_FS_XATTR is not set -# CONFIG_JFFS2_COMPRESSION_OPTIONS is not set -CONFIG_JFFS2_ZLIB=y -# CONFIG_JFFS2_LZO is not set -CONFIG_JFFS2_RTIME=y -# CONFIG_JFFS2_RUBIN is not set -CONFIG_UBIFS_FS=y -# CONFIG_UBIFS_FS_ADVANCED_COMPR is not set -CONFIG_UBIFS_FS_LZO=y -CONFIG_UBIFS_FS_ZLIB=y -# CONFIG_LOGFS is not set -# CONFIG_CRAMFS is not set -# CONFIG_SQUASHFS is not set -# CONFIG_VXFS_FS is not set -# CONFIG_MINIX_FS is not set -# CONFIG_OMFS_FS is not set -# CONFIG_HPFS_FS is not set -# CONFIG_QNX4FS_FS is not set -# CONFIG_QNX6FS_FS is not set -# CONFIG_ROMFS_FS is not set -# CONFIG_PSTORE is not set -# CONFIG_SYSV_FS is not set -# CONFIG_UFS_FS is not set -# CONFIG_F2FS_FS is not set -CONFIG_NETWORK_FILESYSTEMS=y -CONFIG_NFS_FS=y -CONFIG_NFS_V2=y -CONFIG_NFS_V3=y -CONFIG_NFS_V3_ACL=y -CONFIG_NFS_V4=y -# CONFIG_NFS_SWAP is not set -# CONFIG_NFS_V4_1 is not set -CONFIG_ROOT_NFS=y -# CONFIG_NFS_USE_LEGACY_DNS is not set -CONFIG_NFS_USE_KERNEL_DNS=y -# CONFIG_NFSD is not set -CONFIG_LOCKD=y -CONFIG_LOCKD_V4=y -CONFIG_NFS_ACL_SUPPORT=y -CONFIG_NFS_COMMON=y -CONFIG_SUNRPC=y -CONFIG_SUNRPC_GSS=y -# CONFIG_SUNRPC_DEBUG is not set -# CONFIG_CEPH_FS is not set -# CONFIG_CIFS is not set -# CONFIG_NCP_FS is not set -# CONFIG_CODA_FS is not set -# CONFIG_AFS_FS is not set -CONFIG_NLS=y -CONFIG_NLS_DEFAULT="cp437" -CONFIG_NLS_CODEPAGE_437=y -# CONFIG_NLS_CODEPAGE_737 is not set -# CONFIG_NLS_CODEPAGE_775 is not set -# CONFIG_NLS_CODEPAGE_850 is not set -# CONFIG_NLS_CODEPAGE_852 is not set -# CONFIG_NLS_CODEPAGE_855 is not set -# CONFIG_NLS_CODEPAGE_857 is not set -# CONFIG_NLS_CODEPAGE_860 is not set -# CONFIG_NLS_CODEPAGE_861 is not set -# CONFIG_NLS_CODEPAGE_862 is not set -# CONFIG_NLS_CODEPAGE_863 is not set -# CONFIG_NLS_CODEPAGE_864 is not set -# CONFIG_NLS_CODEPAGE_865 is not set -# CONFIG_NLS_CODEPAGE_866 is not set -# CONFIG_NLS_CODEPAGE_869 is not set -# CONFIG_NLS_CODEPAGE_936 is not set -# CONFIG_NLS_CODEPAGE_950 is not set -# CONFIG_NLS_CODEPAGE_932 is not set -# CONFIG_NLS_CODEPAGE_949 is not set -# CONFIG_NLS_CODEPAGE_874 is not set -# CONFIG_NLS_ISO8859_8 is not set -# CONFIG_NLS_CODEPAGE_1250 is not set -# CONFIG_NLS_CODEPAGE_1251 is not set -CONFIG_NLS_ASCII=y -CONFIG_NLS_ISO8859_1=y -# CONFIG_NLS_ISO8859_2 is not set -# CONFIG_NLS_ISO8859_3 is not set -# CONFIG_NLS_ISO8859_4 is not set -# CONFIG_NLS_ISO8859_5 is not set -# CONFIG_NLS_ISO8859_6 is not set -# CONFIG_NLS_ISO8859_7 is not set -# CONFIG_NLS_ISO8859_9 is not set -# CONFIG_NLS_ISO8859_13 is not set -# CONFIG_NLS_ISO8859_14 is not set -CONFIG_NLS_ISO8859_15=m -# CONFIG_NLS_KOI8_R is not set -# CONFIG_NLS_KOI8_U is not set -# CONFIG_NLS_MAC_ROMAN is not set -# CONFIG_NLS_MAC_CELTIC is not set -# CONFIG_NLS_MAC_CENTEURO is not set -# CONFIG_NLS_MAC_CROATIAN is not set -# CONFIG_NLS_MAC_CYRILLIC is not set -# CONFIG_NLS_MAC_GAELIC is not set -# CONFIG_NLS_MAC_GREEK is not set -# CONFIG_NLS_MAC_ICELAND is not set -# CONFIG_NLS_MAC_INUIT is not set -# CONFIG_NLS_MAC_ROMANIAN is not set -# CONFIG_NLS_MAC_TURKISH is not set -CONFIG_NLS_UTF8=y -# CONFIG_DLM is not set - -# -# Kernel hacking -# - -# -# printk and dmesg options -# -# CONFIG_PRINTK_TIME is not set -CONFIG_DEFAULT_MESSAGE_LOGLEVEL=4 -# CONFIG_BOOT_PRINTK_DELAY is not set -# CONFIG_DYNAMIC_DEBUG is not set - -# -# Compile-time checks and compiler options -# -# CONFIG_DEBUG_INFO is not set -CONFIG_ENABLE_WARN_DEPRECATED=y -CONFIG_ENABLE_MUST_CHECK=y -CONFIG_FRAME_WARN=1024 -# CONFIG_STRIP_ASM_SYMS is not set -# CONFIG_READABLE_ASM is not set -# CONFIG_UNUSED_SYMBOLS is not set -CONFIG_DEBUG_FS=y -# CONFIG_HEADERS_CHECK is not set -# CONFIG_DEBUG_SECTION_MISMATCH is not set -CONFIG_FRAME_POINTER=y -# CONFIG_DEBUG_FORCE_WEAK_PER_CPU is not set -CONFIG_MAGIC_SYSRQ=y -CONFIG_MAGIC_SYSRQ_DEFAULT_ENABLE=0x1 -CONFIG_DEBUG_KERNEL=y - -# -# Memory Debugging -# -# CONFIG_DEBUG_PAGEALLOC is not set -# CONFIG_DEBUG_OBJECTS is not set -# CONFIG_SLUB_STATS is not set -CONFIG_HAVE_DEBUG_KMEMLEAK=y -# CONFIG_DEBUG_KMEMLEAK is not set -# CONFIG_DEBUG_STACK_USAGE is not set -# CONFIG_DEBUG_VM is not set -# CONFIG_DEBUG_MEMORY_INIT is not set -# CONFIG_DEBUG_PER_CPU_MAPS is not set -# CONFIG_DEBUG_HIGHMEM is not set -# CONFIG_DEBUG_SHIRQ is not set - -# -# Debug Lockups and Hangs -# -# CONFIG_LOCKUP_DETECTOR is not set -# CONFIG_DETECT_HUNG_TASK is not set -# CONFIG_PANIC_ON_OOPS is not set -CONFIG_PANIC_ON_OOPS_VALUE=0 -CONFIG_PANIC_TIMEOUT=0 -# CONFIG_SCHED_DEBUG is not set -# CONFIG_SCHEDSTATS is not set -# CONFIG_TIMER_STATS is not set - -# -# Lock Debugging (spinlocks, mutexes, etc...) -# -# CONFIG_DEBUG_RT_MUTEXES is not set -# CONFIG_RT_MUTEX_TESTER is not set -CONFIG_DEBUG_SPINLOCK=y -CONFIG_DEBUG_MUTEXES=y -# CONFIG_DEBUG_WW_MUTEX_SLOWPATH is not set -CONFIG_DEBUG_LOCK_ALLOC=y -CONFIG_PROVE_LOCKING=y -CONFIG_LOCKDEP=y -# CONFIG_LOCK_STAT is not set -# CONFIG_DEBUG_LOCKDEP is not set -# CONFIG_DEBUG_ATOMIC_SLEEP is not set -# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set -# CONFIG_LOCK_TORTURE_TEST is not set -CONFIG_TRACE_IRQFLAGS=y -CONFIG_STACKTRACE=y -# CONFIG_DEBUG_KOBJECT is not set -# CONFIG_DEBUG_BUGVERBOSE is not set -# CONFIG_DEBUG_LIST is not set -# CONFIG_DEBUG_PI_LIST is not set -# CONFIG_DEBUG_SG is not set -# CONFIG_DEBUG_NOTIFIERS is not set -# CONFIG_DEBUG_CREDENTIALS is not set - -# -# RCU Debugging -# -# CONFIG_PROVE_RCU is not set -# CONFIG_SPARSE_RCU_POINTER is not set -# CONFIG_TORTURE_TEST is not set -# CONFIG_RCU_TORTURE_TEST is not set -CONFIG_RCU_CPU_STALL_TIMEOUT=21 -# CONFIG_RCU_CPU_STALL_INFO is not set -# CONFIG_RCU_TRACE is not set -# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set -# CONFIG_NOTIFIER_ERROR_INJECTION is not set -# CONFIG_FAULT_INJECTION is not set -CONFIG_HAVE_FUNCTION_TRACER=y -CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y -CONFIG_HAVE_DYNAMIC_FTRACE=y -CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y -CONFIG_HAVE_SYSCALL_TRACEPOINTS=y -CONFIG_HAVE_C_RECORDMCOUNT=y -CONFIG_TRACING_SUPPORT=y -# CONFIG_FTRACE is not set - -# -# Runtime Testing -# -# CONFIG_LKDTM is not set -# CONFIG_TEST_LIST_SORT is not set -# CONFIG_BACKTRACE_SELF_TEST is not set -# CONFIG_RBTREE_TEST is not set -# CONFIG_INTERVAL_TREE_TEST is not set -# CONFIG_PERCPU_TEST is not set -# CONFIG_ATOMIC64_SELFTEST is not set -# CONFIG_TEST_STRING_HELPERS is not set -# CONFIG_TEST_KSTRTOX is not set -# CONFIG_DMA_API_DEBUG is not set -# CONFIG_TEST_MODULE is not set -# CONFIG_TEST_USER_COPY is not set -# CONFIG_TEST_BPF is not set -# CONFIG_SAMPLES is not set -CONFIG_HAVE_ARCH_KGDB=y -# CONFIG_KGDB is not set -# CONFIG_ARM_PTDUMP is not set -# CONFIG_STRICT_DEVMEM is not set -# CONFIG_ARM_UNWIND is not set -# CONFIG_DEBUG_USER is not set -# CONFIG_DEBUG_LL is not set -CONFIG_DEBUG_IMX_UART_PORT=1 -CONFIG_DEBUG_VF_UART_PORT=1 -CONFIG_DEBUG_LL_INCLUDE="mach/debug-macro.S" -# CONFIG_DEBUG_UART_PL01X is not set -# CONFIG_DEBUG_UART_8250 is not set -CONFIG_UNCOMPRESS_INCLUDE="debug/uncompress.h" -# CONFIG_PID_IN_CONTEXTIDR is not set -# CONFIG_DEBUG_SET_MODULE_RONX is not set - -# -# Security options -# -CONFIG_KEYS=y -# CONFIG_PERSISTENT_KEYRINGS is not set -# CONFIG_BIG_KEYS is not set -# CONFIG_ENCRYPTED_KEYS is not set -# CONFIG_KEYS_DEBUG_PROC_KEYS is not set -# CONFIG_SECURITY_DMESG_RESTRICT is not set -# CONFIG_SECURITY is not set -CONFIG_SECURITYFS=y -CONFIG_DEFAULT_SECURITY_DAC=y -CONFIG_DEFAULT_SECURITY="" -CONFIG_CRYPTO=y - -# -# Crypto core or helper -# -CONFIG_CRYPTO_ALGAPI=y -CONFIG_CRYPTO_ALGAPI2=y -CONFIG_CRYPTO_AEAD=y -CONFIG_CRYPTO_AEAD2=y -CONFIG_CRYPTO_BLKCIPHER=y -CONFIG_CRYPTO_BLKCIPHER2=y -CONFIG_CRYPTO_HASH=y -CONFIG_CRYPTO_HASH2=y -CONFIG_CRYPTO_RNG=y -CONFIG_CRYPTO_RNG2=y -CONFIG_CRYPTO_PCOMP2=y -CONFIG_CRYPTO_MANAGER=y -CONFIG_CRYPTO_MANAGER2=y -# CONFIG_CRYPTO_USER is not set -CONFIG_CRYPTO_MANAGER_DISABLE_TESTS=y -# CONFIG_CRYPTO_GF128MUL is not set -# CONFIG_CRYPTO_NULL is not set -# CONFIG_CRYPTO_PCRYPT is not set -CONFIG_CRYPTO_WORKQUEUE=y -# CONFIG_CRYPTO_CRYPTD is not set -# CONFIG_CRYPTO_AUTHENC is not set -# CONFIG_CRYPTO_TEST is not set - -# -# Authenticated Encryption with Associated Data -# -CONFIG_CRYPTO_CCM=y -# CONFIG_CRYPTO_GCM is not set -CONFIG_CRYPTO_SEQIV=y - -# -# Block modes -# -# CONFIG_CRYPTO_CBC is not set -CONFIG_CRYPTO_CTR=y -# CONFIG_CRYPTO_CTS is not set -# CONFIG_CRYPTO_ECB is not set -# CONFIG_CRYPTO_LRW is not set -# CONFIG_CRYPTO_PCBC is not set -# CONFIG_CRYPTO_XTS is not set - -# -# Hash modes -# -# CONFIG_CRYPTO_CMAC is not set -# CONFIG_CRYPTO_HMAC is not set -# CONFIG_CRYPTO_XCBC is not set -# CONFIG_CRYPTO_VMAC is not set - -# -# Digest -# -CONFIG_CRYPTO_CRC32C=y -# CONFIG_CRYPTO_CRC32 is not set -CONFIG_CRYPTO_CRCT10DIF=y -# CONFIG_CRYPTO_GHASH is not set -# CONFIG_CRYPTO_MD4 is not set -# CONFIG_CRYPTO_MD5 is not set -# CONFIG_CRYPTO_MICHAEL_MIC is not set -# CONFIG_CRYPTO_RMD128 is not set -# CONFIG_CRYPTO_RMD160 is not set -# CONFIG_CRYPTO_RMD256 is not set -# CONFIG_CRYPTO_RMD320 is not set -# CONFIG_CRYPTO_SHA1 is not set -# CONFIG_CRYPTO_SHA1_ARM is not set -# CONFIG_CRYPTO_SHA256 is not set -# CONFIG_CRYPTO_SHA512 is not set -# CONFIG_CRYPTO_TGR192 is not set -# CONFIG_CRYPTO_WP512 is not set - -# -# Ciphers -# -CONFIG_CRYPTO_AES=y -# CONFIG_CRYPTO_AES_ARM is not set -# CONFIG_CRYPTO_ANUBIS is not set -CONFIG_CRYPTO_ARC4=y -# CONFIG_CRYPTO_BLOWFISH is not set -# CONFIG_CRYPTO_CAMELLIA is not set -# CONFIG_CRYPTO_CAST5 is not set -# CONFIG_CRYPTO_CAST6 is not set -# CONFIG_CRYPTO_DES is not set -# CONFIG_CRYPTO_FCRYPT is not set -# CONFIG_CRYPTO_KHAZAD is not set -# CONFIG_CRYPTO_SALSA20 is not set -# CONFIG_CRYPTO_SEED is not set -# CONFIG_CRYPTO_SERPENT is not set -# CONFIG_CRYPTO_TEA is not set -# CONFIG_CRYPTO_TWOFISH is not set - -# -# Compression -# -CONFIG_CRYPTO_DEFLATE=y -# CONFIG_CRYPTO_ZLIB is not set -CONFIG_CRYPTO_LZO=y -# CONFIG_CRYPTO_LZ4 is not set -# CONFIG_CRYPTO_LZ4HC is not set - -# -# Random Number Generation -# -# CONFIG_CRYPTO_ANSI_CPRNG is not set -# CONFIG_CRYPTO_USER_API_HASH is not set -# CONFIG_CRYPTO_USER_API_SKCIPHER is not set -# CONFIG_CRYPTO_HW is not set -# CONFIG_ASYMMETRIC_KEY_TYPE is not set -# CONFIG_BINARY_PRINTF is not set - -# -# Library routines -# -CONFIG_BITREVERSE=y -CONFIG_RATIONAL=y -CONFIG_GENERIC_STRNCPY_FROM_USER=y -CONFIG_GENERIC_STRNLEN_USER=y -CONFIG_GENERIC_NET_UTILS=y -CONFIG_GENERIC_PCI_IOMAP=y -CONFIG_GENERIC_IO=y -CONFIG_STMP_DEVICE=y -CONFIG_ARCH_USE_CMPXCHG_LOCKREF=y -CONFIG_CRC_CCITT=m -CONFIG_CRC16=y -CONFIG_CRC_T10DIF=y -CONFIG_CRC_ITU_T=m -CONFIG_CRC32=y -# CONFIG_CRC32_SELFTEST is not set -CONFIG_CRC32_SLICEBY8=y -# CONFIG_CRC32_SLICEBY4 is not set -# CONFIG_CRC32_SARWATE is not set -# CONFIG_CRC32_BIT is not set -CONFIG_CRC7=m -CONFIG_LIBCRC32C=m -# CONFIG_CRC8 is not set -# CONFIG_AUDIT_ARCH_COMPAT_GENERIC is not set -# CONFIG_RANDOM32_SELFTEST is not set -CONFIG_ZLIB_INFLATE=y -CONFIG_ZLIB_DEFLATE=y -CONFIG_LZO_COMPRESS=y -CONFIG_LZO_DECOMPRESS=y -# CONFIG_XZ_DEC is not set -# CONFIG_XZ_DEC_BCJ is not set -CONFIG_DECOMPRESS_GZIP=y -CONFIG_GENERIC_ALLOCATOR=y -CONFIG_ASSOCIATIVE_ARRAY=y -CONFIG_HAS_IOMEM=y -CONFIG_HAS_IOPORT_MAP=y -CONFIG_HAS_DMA=y -CONFIG_CPU_RMAP=y -CONFIG_DQL=y -CONFIG_NLATTR=y -CONFIG_GENERIC_ATOMIC64=y -CONFIG_ARCH_HAS_ATOMIC64_DEC_IF_POSITIVE=y -CONFIG_AVERAGE=y -# CONFIG_CORDIC is not set -# CONFIG_DDR is not set -CONFIG_LIBFDT=y -CONFIG_OID_REGISTRY=y -CONFIG_FONT_SUPPORT=y -CONFIG_FONTS=y -CONFIG_FONT_8x8=y -CONFIG_FONT_8x16=y -# CONFIG_FONT_6x11 is not set -# CONFIG_FONT_7x14 is not set -# CONFIG_FONT_PEARL_8x8 is not set -# CONFIG_FONT_ACORN_8x8 is not set -# CONFIG_FONT_MINI_4x6 is not set -# CONFIG_FONT_SUN8x16 is not set -# CONFIG_FONT_SUN12x22 is not set -# CONFIG_FONT_10x18 is not set -# CONFIG_VIRTUALIZATION is not set diff --git a/distribution/yocto-advanced/poky/meta-mini/recipes-kernel/recipes-kernel/linux-vanilla/linux-vanilla_3.16.1.bb b/distribution/yocto-advanced/poky/meta-mini/recipes-kernel/recipes-kernel/linux-vanilla/linux-vanilla_3.16.1.bb deleted file mode 100644 index 80b35c9..0000000 --- a/distribution/yocto-advanced/poky/meta-mini/recipes-kernel/recipes-kernel/linux-vanilla/linux-vanilla_3.16.1.bb +++ /dev/null @@ -1,29 +0,0 @@ -SECTION = "kernel" -DESCRIPTION = "Linux vanilla kernel" -LICENSE = "GPLv2" -LIC_FILES_CHKSUM = "file://COPYING;md5=d7810fab7487fb0aad327b76f1be7cd7" -KERNEL_IMAGETYPE = "uImage" - -inherit kernel - -require recipes-kernel/linux/linux-dtb.inc - -COMPATIBLE_MACHINE = "imx6qsabrelite" - -KERNEL_DEVICETREE_imx6qsabrelite = "arch/arm/boot/dts/imx6q-sabrelite.dts" -KERNEL_DEVICETREE_beaglebone-black = "arch/arm/boot/dts/beaglebone-black.dts" - -S = "${WORKDIR}/linux-${PV}" - -SRC_URI = "https://www.kernel.org/pub/linux/kernel/v3.x/linux-${PV}.tar.xz \ - file://defconfig \ -" -SRC_URI[md5sum] = "e7a985a243b7941b6bc6240fcbc797fc" -SRC_URI[sha256sum] = "be37dda8ea090525661d64e5c7fc8580f313b7f9ba8592e32120f1332bc57d71" - -LINUX_VERSION_EXTENSION = "-sabrelite" -KERNEL_EXTRA_ARGS += "LOADADDR=${UBOOT_ENTRYPOINT}" - -do_configure_prepend () { - cp '${WORKDIR}/defconfig' '${S}/.config' -} diff --git a/examples/yocto/meta-mini/COPYING.MIT b/examples/yocto/meta-mini/COPYING.MIT new file mode 100644 index 0000000..89de354 --- /dev/null +++ b/examples/yocto/meta-mini/COPYING.MIT @@ -0,0 +1,17 @@ +Permission is hereby granted, free of charge, to any person obtaining a copy +of this software and associated documentation files (the "Software"), to deal +in the Software without restriction, including without limitation the rights +to use, copy, modify, merge, publish, distribute, sublicense, and/or sell +copies of the Software, and to permit persons to whom the Software is +furnished to do so, subject to the following conditions: + +The above copyright notice and this permission notice shall be included in +all copies or substantial portions of the Software. + +THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR +IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, +FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE +AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER +LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, +OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN +THE SOFTWARE. diff --git a/examples/yocto/meta-mini/README b/examples/yocto/meta-mini/README new file mode 100644 index 0000000..8014dc2 --- /dev/null +++ b/examples/yocto/meta-mini/README @@ -0,0 +1,4 @@ +this is a mini layer for the sabrelite and beaglebone black board + +use DISTRO='lxt' MACHINE='beaglebone-black | sabrelite' in your local.conf +and 'bitbake mini-image' diff --git a/examples/yocto/meta-mini/classes/fsl-dynamic-packagearch.bbclass b/examples/yocto/meta-mini/classes/fsl-dynamic-packagearch.bbclass new file mode 100644 index 0000000..40eae6c --- /dev/null +++ b/examples/yocto/meta-mini/classes/fsl-dynamic-packagearch.bbclass @@ -0,0 +1,47 @@ +# Automatically set PACKAGE_ARCH for MACHINE_SOCARCH +# +# This allow to easy reuse of binary packages among similar SoCs. The +# usual use for this is to share SoC specific packages among different +# boards. +# +# MACHINE_SOCARCH_FILTER list all packages associated with +# MACHINE_SOCARCH and, when match, will set PACKAGE_ARCH as MACHINE_SOCARCH +# +# MACHINE_ARCH_FILTER list all packages associated with +# MACHINE_ARCH and, when match, will set PACKAGE_ARCH as MACHINE_ARCH +# +# For example, in meta-fsl-arm, this is used to share GPU packages for +# i.MX53 boards (as all them share the AMD GPU) and i.MX6 based boards +# (as all them share Vivante GPU). +# +# To use the class, specify, for example: +# +# MACHINE_SOCARCH_soc = "${TUNE_PKGARCH}-soc" +# +# and the need filters, as: +# +# MACHINE_ARCH_FILTER = "virtual/kernel" +# MACHINE_SOCARCH_FILTER_soc = "virtual/libgles1 ... virtual/libgl" +# +# Copyright 2013 (C) O.S. Systems Software LTDA. + +python __anonymous () { + machine_arch_filter = set((d.getVar("MACHINE_ARCH_FILTER", True) or "").split()) + machine_socarch_filter = set((d.getVar("MACHINE_SOCARCH_FILTER", True) or "").split()) + if machine_socarch_filter or machine_arch_filter: + provides = set((d.getVar("PROVIDES", True) or "").split()) + depends = set((d.getVar("DEPENDS", True) or "").split()) + PN = d.getVar("PN", True) + + package_arch = None + if list(machine_arch_filter & (provides | depends)): + package_arch = d.getVar("MACHINE_ARCH", True) + elif list(machine_socarch_filter & (provides | depends)): + package_arch = d.getVar("MACHINE_SOCARCH", True) + if not package_arch: + bb.parse.SkipPackage("You must set MACHINE_SOCARCH as MACHINE_SOCARCH_FILTER is set for this SoC.") + + if package_arch: + bb.debug(1, "Use '%s' as package archictecture for '%s'" % (package_arch, PN)) + d.setVar("PACKAGE_ARCH", package_arch) +} diff --git a/examples/yocto/meta-mini/classes/image_sdcard.bbclass b/examples/yocto/meta-mini/classes/image_sdcard.bbclass new file mode 100644 index 0000000..f70c4e5 --- /dev/null +++ b/examples/yocto/meta-mini/classes/image_sdcard.bbclass @@ -0,0 +1,73 @@ +inherit image_types + +IMAGE_BOOTLOADER ?= "u-boot" + +# Handle u-boot suffixes +UBOOT_SUFFIX ?= "bin" +UBOOT_PADDING ?= "0" +UBOOT_SUFFIX_SDCARD ?= "${UBOOT_SUFFIX}" + +# Linux bootstream +IMAGE_DEPENDS_linux.sb = "virtual/kernel:do_deploy" + +# Boot partition volume id +BOOTDD_VOLUME_ID ?= "Boot ${MACHINE}" +# Boot partition size [in KiB] +BOOT_SPACE ?= "8192" +# Set alignment to 4MB [in KiB] +IMAGE_ROOTFS_ALIGNMENT = "4096" + +IMAGE_DEPENDS_sdcard = "parted-native:do_populate_sysroot \ + dosfstools-native:do_populate_sysroot \ + mtools-native:do_populate_sysroot \ + virtual/kernel:do_deploy \ + ${@d.getVar('IMAGE_BOOTLOADER', True) and d.getVar('IMAGE_BOOTLOADER', True) + ':do_deploy' or ''}" + +SDCARD = "${DEPLOY_DIR_IMAGE}/${IMAGE_NAME}.rootfs.sdcard" + +SDCARD_GENERATION_COMMAND_ti33x = "generate_ti_sdcard" + +generate_ti_sdcard () { + parted -s ${SDCARD} mklabel msdos + parted -s ${SDCARD} unit KiB mkpart primary fat32 ${IMAGE_ROOTFS_ALIGNMENT} $(expr ${IMAGE_ROOTFS_ALIGNMENT} \+ ${BOOT_SPACE_ALIGNED}) + parted -s ${SDCARD} unit KiB mkpart primary $(expr ${IMAGE_ROOTFS_ALIGNMENT} \+ ${BOOT_SPACE_ALIGNED}) $(expr ${IMAGE_ROOTFS_ALIGNMENT} \+ ${BOOT_SPACE_ALIGNED} \+ $ROOTFS_SIZE) + parted -s ${SDCARD} set 1 boot on + parted ${SDCARD} print + + BOOT_BLOCKS=$(LC_ALL=C parted -s ${SDCARD} unit b print \ + | awk '/ 1 / { print substr($4, 1, length($4 -1)) / 1024 }') + mkfs.vfat -n "${BOOTDD_VOLUME_ID}" -S 512 -C ${WORKDIR}/boot.img $BOOT_BLOCKS + + # copy files to /boot + mcopy -i ${WORKDIR}/boot.img -s ${DEPLOY_DIR_IMAGE}/MLO-${MACHINE} ::/MLO + mcopy -i ${WORKDIR}/boot.img -s ${DEPLOY_DIR_IMAGE}/u-boot-${MACHINE}.img ::/u-boot.img + mmd -i ${WORKDIR}/boot.img ::/boot + mcopy -i ${WORKDIR}/boot.img -s ${DEPLOY_DIR_IMAGE}/${KERNEL_IMAGETYPE}-${MACHINE}.bin ::/boot/${KERNEL_IMAGETYPE} + mcopy -i ${WORKDIR}/boot.img -s ${DEPLOY_DIR_IMAGE}/${KERNEL_IMAGETYPE}-am335x-boneblack.dtb ::/boot/am335x-boneblack.dtb + mcopy -i ${WORKDIR}/boot.img -s ${DEPLOY_DIR_IMAGE}/uEnv.txt ::/uEnv.txt + + # Burn Partition + dd if=${WORKDIR}/boot.img of=${SDCARD} conv=notrunc seek=1 bs=$(expr ${IMAGE_ROOTFS_ALIGNMENT} \* 1024) && sync && sync + dd if=${SDCARD_ROOTFS} of=${SDCARD} conv=notrunc seek=1 bs=$(expr ${BOOT_SPACE_ALIGNED} \* 1024 + ${IMAGE_ROOTFS_ALIGNMENT} \* 1024) && sync && sync +} + +IMAGE_CMD_sdcard () { + if [ -z "${SDCARD_ROOTFS}" ]; then + bberror "SDCARD_ROOTFS is undefined. To use sdcard image from Freescale's BSP it needs to be defined." + exit 1 + fi + + # Align boot partition and calculate total SD card image size + BOOT_SPACE_ALIGNED=$(expr ${BOOT_SPACE} + ${IMAGE_ROOTFS_ALIGNMENT} - 1) + BOOT_SPACE_ALIGNED=$(expr ${BOOT_SPACE_ALIGNED} - ${BOOT_SPACE_ALIGNED} % ${IMAGE_ROOTFS_ALIGNMENT}) + SDCARD_SIZE=$(expr ${IMAGE_ROOTFS_ALIGNMENT} + ${BOOT_SPACE_ALIGNED} + $ROOTFS_SIZE + ${IMAGE_ROOTFS_ALIGNMENT}) + + # Initialize a sparse file + dd if=/dev/zero of=${SDCARD} bs=1 count=0 seek=$(expr 1024 \* ${SDCARD_SIZE}) + + ${SDCARD_GENERATION_COMMAND} +} + +# The sdcard requires the rootfs filesystem to be built before using +# it so we must make this dependency explicit. +IMAGE_TYPEDEP_sdcard = "${@d.getVar('SDCARD_ROOTFS', 1).split('.')[-1]}" diff --git a/examples/yocto/meta-mini/classes/image_types_fsl.bbclass b/examples/yocto/meta-mini/classes/image_types_fsl.bbclass new file mode 100644 index 0000000..deb6573 --- /dev/null +++ b/examples/yocto/meta-mini/classes/image_types_fsl.bbclass @@ -0,0 +1,344 @@ +inherit image_types + +IMAGE_BOOTLOADER ?= "u-boot" + +# Handle u-boot suffixes +UBOOT_SUFFIX ?= "bin" +UBOOT_PADDING ?= "0" +UBOOT_SUFFIX_SDCARD ?= "${UBOOT_SUFFIX}" + +# +# Handles i.MX mxs bootstream generation +# +MXSBOOT_NAND_ARGS ?= "" + +# IMX Bootlets Linux bootstream +IMAGE_DEPENDS_linux.sb = "elftosb-native:do_populate_sysroot \ + imx-bootlets:do_deploy \ + virtual/kernel:do_deploy" +IMAGE_LINK_NAME_linux.sb = "" +IMAGE_CMD_linux.sb () { + kernel_bin="`readlink ${DEPLOY_DIR_IMAGE}/${KERNEL_IMAGETYPE}-${MACHINE}.bin`" + kernel_dtb="`readlink ${DEPLOY_DIR_IMAGE}/${KERNEL_IMAGETYPE}-${MACHINE}.dtb || true`" + linux_bd_file=imx-bootlets-linux.bd-${MACHINE} + if [ `basename $kernel_bin .bin` = `basename $kernel_dtb .dtb` ]; then + # When using device tree we build a zImage with the dtb + # appended on the end of the image + linux_bd_file=imx-bootlets-linux.bd-dtb-${MACHINE} + cat $kernel_bin $kernel_dtb \ + > $kernel_bin-dtb + rm -f ${DEPLOY_DIR_IMAGE}/${KERNEL_IMAGETYPE}-${MACHINE}.bin-dtb + ln -s $kernel_bin-dtb ${DEPLOY_DIR_IMAGE}/${KERNEL_IMAGETYPE}-${MACHINE}.bin-dtb + fi + + # Ensure the file is generated + rm -f ${DEPLOY_DIR_IMAGE}/${IMAGE_NAME}.linux.sb + (cd ${DEPLOY_DIR_IMAGE}; elftosb -z -c $linux_bd_file -o ${IMAGE_NAME}.linux.sb) + + # Remove the appended file as it is only used here + rm -f ${DEPLOY_DIR_IMAGE}/$kernel_bin-dtb +} + +# IMX Bootlets barebox bootstream +IMAGE_DEPENDS_barebox.mxsboot-sdcard = "elftosb-native:do_populate_sysroot \ + u-boot-mxsboot-native:do_populate_sysroot \ + imx-bootlets:do_deploy \ + barebox:do_deploy" +IMAGE_CMD_barebox.mxsboot-sdcard () { + barebox_bd_file=imx-bootlets-barebox_ivt.bd-${MACHINE} + + # Ensure the files are generated + (cd ${DEPLOY_DIR_IMAGE}; rm -f ${IMAGE_NAME}.barebox.sb ${IMAGE_NAME}.barebox.mxsboot-sdcard; \ + elftosb -f mx28 -z -c $barebox_bd_file -o ${IMAGE_NAME}.barebox.sb; \ + mxsboot sd ${IMAGE_NAME}.barebox.sb ${IMAGE_NAME}.barebox.mxsboot-sdcard) +} + +# U-Boot mxsboot generation to SD-Card +UBOOT_SUFFIX_SDCARD_mxs ?= "mxsboot-sdcard" +IMAGE_DEPENDS_uboot.mxsboot-sdcard = "u-boot-mxsboot-native:do_populate_sysroot \ + u-boot:do_deploy" +IMAGE_CMD_uboot.mxsboot-sdcard = "mxsboot sd ${DEPLOY_DIR_IMAGE}/u-boot-${MACHINE}.${UBOOT_SUFFIX} \ + ${DEPLOY_DIR_IMAGE}/${IMAGE_NAME}.rootfs.uboot.mxsboot-sdcard" + +IMAGE_DEPENDS_uboot.mxsboot-nand = "u-boot-mxsboot-native:do_populate_sysroot \ + u-boot:do_deploy" +IMAGE_CMD_uboot.mxsboot-nand = "mxsboot ${MXSBOOT_NAND_ARGS} nand \ + ${DEPLOY_DIR_IMAGE}/u-boot-${MACHINE}.${UBOOT_SUFFIX} \ + ${DEPLOY_DIR_IMAGE}/${IMAGE_NAME}.rootfs.uboot.mxsboot-nand" + +# Boot partition volume id +BOOTDD_VOLUME_ID ?= "Boot ${MACHINE}" + +# Boot partition size [in KiB] +BOOT_SPACE ?= "8192" + +# Barebox environment size [in KiB] +BAREBOX_ENV_SPACE ?= "512" + +# Set alignment to 4MB [in KiB] +IMAGE_ROOTFS_ALIGNMENT = "4096" + +IMAGE_DEPENDS_sdcard = "parted-native:do_populate_sysroot \ + dosfstools-native:do_populate_sysroot \ + mtools-native:do_populate_sysroot \ + virtual/kernel:do_deploy \ + ${@d.getVar('IMAGE_BOOTLOADER', True) and d.getVar('IMAGE_BOOTLOADER', True) + ':do_deploy' or ''}" + +SDCARD = "${DEPLOY_DIR_IMAGE}/${IMAGE_NAME}.rootfs.sdcard" + +SDCARD_GENERATION_COMMAND_mxs = "generate_mxs_sdcard" +SDCARD_GENERATION_COMMAND_mx25 = "generate_imx_sdcard" +SDCARD_GENERATION_COMMAND_mx5 = "generate_imx_sdcard" +SDCARD_GENERATION_COMMAND_mx6 = "generate_imx_sdcard" +SDCARD_GENERATION_COMMAND_vf60 = "generate_imx_sdcard" +SDCARD_GENERATION_COMMAND_ti33x = "generate_ti_sdcard" + +generate_ti_sdcard () { + parted -s ${SDCARD} mklabel msdos + parted -s ${SDCARD} unit KiB mkpart primary fat32 ${IMAGE_ROOTFS_ALIGNMENT} $(expr ${IMAGE_ROOTFS_ALIGNMENT} \+ ${BOOT_SPACE_ALIGNED}) + parted -s ${SDCARD} unit KiB mkpart primary $(expr ${IMAGE_ROOTFS_ALIGNMENT} \+ ${BOOT_SPACE_ALIGNED}) $(expr ${IMAGE_ROOTFS_ALIGNMENT} \+ ${BOOT_SPACE_ALIGNED} \+ $ROOTFS_SIZE) + parted -s ${SDCARD} set 1 boot on + parted ${SDCARD} print + + BOOT_BLOCKS=$(LC_ALL=C parted -s ${SDCARD} unit b print \ + | awk '/ 1 / { print substr($4, 1, length($4 -1)) / 1024 }') + mkfs.vfat -n "${BOOTDD_VOLUME_ID}" -S 512 -C ${WORKDIR}/boot.img $BOOT_BLOCKS + + # copy files to /boot + mcopy -i ${WORKDIR}/boot.img -s ${DEPLOY_DIR_IMAGE}/MLO-${MACHINE} ::/MLO + mcopy -i ${WORKDIR}/boot.img -s ${DEPLOY_DIR_IMAGE}/u-boot-${MACHINE}.img ::/u-boot.img + mmd -i ${WORKDIR}/boot.img ::/boot + mcopy -i ${WORKDIR}/boot.img -s ${DEPLOY_DIR_IMAGE}/${KERNEL_IMAGETYPE}-${MACHINE}.bin ::/boot/${KERNEL_IMAGETYPE} + mcopy -i ${WORKDIR}/boot.img -s ${DEPLOY_DIR_IMAGE}/${KERNEL_IMAGETYPE}-am335x-boneblack.dtb ::/boot/am335x-boneblack.dtb + mcopy -i ${WORKDIR}/boot.img -s ${DEPLOY_DIR_IMAGE}/uEnv.txt ::/uEnv.txt + + # Burn Partition + dd if=${WORKDIR}/boot.img of=${SDCARD} conv=notrunc seek=1 bs=$(expr ${IMAGE_ROOTFS_ALIGNMENT} \* 1024) && sync && sync + dd if=${SDCARD_ROOTFS} of=${SDCARD} conv=notrunc seek=1 bs=$(expr ${BOOT_SPACE_ALIGNED} \* 1024 + ${IMAGE_ROOTFS_ALIGNMENT} \* 1024) && sync && sync +} + +# +# Create an image that can by written onto a SD card using dd for use +# with i.MX SoC family +# +# External variables needed: +# ${SDCARD_ROOTFS} - the rootfs image to incorporate +# ${IMAGE_BOOTLOADER} - bootloader to use {u-boot, barebox} +# +# The disk layout used is: +# +# 0 -> IMAGE_ROOTFS_ALIGNMENT - reserved to bootloader (not partitioned) +# IMAGE_ROOTFS_ALIGNMENT -> BOOT_SPACE - kernel and other data +# BOOT_SPACE -> SDIMG_SIZE - rootfs +# +# Default Free space = 1.3x +# Use IMAGE_OVERHEAD_FACTOR to add more space +# <---------> +# 4MiB 8MiB SDIMG_ROOTFS 4MiB +# <-----------------------> <----------> <----------------------> <------------------------------> +# ------------------------ ------------ ------------------------ ------------------------------- +# | IMAGE_ROOTFS_ALIGNMENT | BOOT_SPACE | ROOTFS_SIZE | IMAGE_ROOTFS_ALIGNMENT | +# ------------------------ ------------ ------------------------ ------------------------------- +# ^ ^ ^ ^ ^ +# | | | | | +# 0 4096 4MiB + 8MiB 4MiB + 8Mib + SDIMG_ROOTFS 4MiB + 8MiB + SDIMG_ROOTFS + 4MiB +generate_imx_sdcard () { + # Create partition table + parted -s ${SDCARD} mklabel msdos + parted -s ${SDCARD} unit KiB mkpart primary fat32 ${IMAGE_ROOTFS_ALIGNMENT} $(expr ${IMAGE_ROOTFS_ALIGNMENT} \+ ${BOOT_SPACE_ALIGNED}) + parted -s ${SDCARD} unit KiB mkpart primary $(expr ${IMAGE_ROOTFS_ALIGNMENT} \+ ${BOOT_SPACE_ALIGNED}) $(expr ${IMAGE_ROOTFS_ALIGNMENT} \+ ${BOOT_SPACE_ALIGNED} \+ $ROOTFS_SIZE) + parted ${SDCARD} print + + # Burn bootloader + case "${IMAGE_BOOTLOADER}" in + imx-bootlets) + bberror "The imx-bootlets is not supported for i.MX based machines" + exit 1 + ;; + u-boot) + if [ -n "${SPL_BINARY}" ]; then + dd if=${DEPLOY_DIR_IMAGE}/${SPL_BINARY} of=${SDCARD} conv=notrunc seek=2 bs=512 + dd if=${DEPLOY_DIR_IMAGE}/u-boot-${MACHINE}.${UBOOT_SUFFIX_SDCARD} of=${SDCARD} conv=notrunc seek=42 bs=1K + else + dd if=${DEPLOY_DIR_IMAGE}/u-boot-${MACHINE}.${UBOOT_SUFFIX_SDCARD} of=${SDCARD} conv=notrunc seek=2 skip=${UBOOT_PADDING} bs=512 + fi + ;; + barebox) + dd if=${DEPLOY_DIR_IMAGE}/barebox-${MACHINE}.bin of=${SDCARD} conv=notrunc seek=1 skip=1 bs=512 + dd if=${DEPLOY_DIR_IMAGE}/bareboxenv-${MACHINE}.bin of=${SDCARD} conv=notrunc seek=1 bs=512k + ;; + "") + ;; + *) + bberror "Unkown IMAGE_BOOTLOADER value" + exit 1 + ;; + esac + + # Create boot partition image + BOOT_BLOCKS=$(LC_ALL=C parted -s ${SDCARD} unit b print \ + | awk '/ 1 / { print substr($4, 1, length($4 -1)) / 1024 }') + mkfs.vfat -n "${BOOTDD_VOLUME_ID}" -S 512 -C ${WORKDIR}/boot.img $BOOT_BLOCKS + mcopy -i ${WORKDIR}/boot.img -s ${DEPLOY_DIR_IMAGE}/${KERNEL_IMAGETYPE}-${MACHINE}.bin ::/${KERNEL_IMAGETYPE} + + # Copy boot scripts + for item in ${BOOT_SCRIPTS}; do + src=`echo $item | awk -F':' '{ print $1 }'` + dst=`echo $item | awk -F':' '{ print $2 }'` + + mcopy -i ${WORKDIR}/boot.img -s ${DEPLOY_DIR_IMAGE}/$src ::/$dst + done + + # Copy device tree file + if test -n "${KERNEL_DEVICETREE}"; then + for DTS_FILE in ${KERNEL_DEVICETREE}; do + DTS_BASE_NAME=`basename ${DTS_FILE} | awk -F "." '{print $1}'` + if [ -e "${KERNEL_IMAGETYPE}-${DTS_BASE_NAME}.dtb" ]; then + kernel_bin="`readlink ${KERNEL_IMAGETYPE}-${MACHINE}.bin`" + kernel_bin_for_dtb="`readlink ${KERNEL_IMAGETYPE}-${DTS_BASE_NAME}.dtb | sed "s,$DTS_BASE_NAME,${MACHINE},g;s,\.dtb$,.bin,g"`" + if [ $kernel_bin = $kernel_bin_for_dtb ]; then + mcopy -i ${WORKDIR}/boot.img -s ${DEPLOY_DIR_IMAGE}/${KERNEL_IMAGETYPE}-${DTS_BASE_NAME}.dtb ::/${DTS_BASE_NAME}.dtb + fi + fi + done + fi + + # Burn Partition + dd if=${WORKDIR}/boot.img of=${SDCARD} conv=notrunc seek=1 bs=$(expr ${IMAGE_ROOTFS_ALIGNMENT} \* 1024) && sync && sync + dd if=${SDCARD_ROOTFS} of=${SDCARD} conv=notrunc seek=1 bs=$(expr ${BOOT_SPACE_ALIGNED} \* 1024 + ${IMAGE_ROOTFS_ALIGNMENT} \* 1024) && sync && sync +} + +# +# Create an image that can by written onto a SD card using dd for use +# with i.MXS SoC family +# +# External variables needed: +# ${SDCARD_ROOTFS} - the rootfs image to incorporate +# ${IMAGE_BOOTLOADER} - bootloader to use {imx-bootlets, u-boot} +# +generate_mxs_sdcard () { + # Create partition table + parted -s ${SDCARD} mklabel msdos + + case "${IMAGE_BOOTLOADER}" in + imx-bootlets) + # The disk layout used is: + # + # 0 -> 1024 - Unused (not partitioned) + # 1024 -> BOOT_SPACE - kernel and other data (bootstream) + # BOOT_SPACE -> SDIMG_SIZE - rootfs + # + # Default Free space = 1.3x + # Use IMAGE_OVERHEAD_FACTOR to add more space + # <---------> + # 1024 8MiB SDIMG_ROOTFS 4MiB + # <-------> <----------> <----------------------> <------------------------------> + # --------------------- ------------------------ ------------------------------- + # | Unused | BOOT_SPACE | ROOTFS_SIZE | IMAGE_ROOTFS_ALIGNMENT | + # --------------------- ------------------------ ------------------------------- + # ^ ^ ^ ^ ^ + # | | | | | + # 0 1024 1024 + 8MiB 1024 + 8Mib + SDIMG_ROOTFS 1024 + 8MiB + SDIMG_ROOTFS + 4MiB + parted -s ${SDCARD} unit KiB mkpart primary 1024 $(expr ${IMAGE_ROOTFS_ALIGNMENT} \+ ${BOOT_SPACE_ALIGNED}) + parted -s ${SDCARD} unit KiB mkpart primary $(expr ${IMAGE_ROOTFS_ALIGNMENT} \+ ${BOOT_SPACE_ALIGNED}) $(expr ${IMAGE_ROOTFS_ALIGNMENT} \+ ${BOOT_SPACE_ALIGNED} \+ $ROOTFS_SIZE) + + # Empty 4 bytes from boot partition + dd if=/dev/zero of=${SDCARD} conv=notrunc seek=2048 count=4 + + # Write the bootstream in (2048 + 4) bytes + dd if=${DEPLOY_DIR_IMAGE}/${IMAGE_NAME}.linux.sb of=${SDCARD} conv=notrunc seek=1 seek=2052 + ;; + u-boot) + # The disk layout used is: + # + # 1M - 2M - reserved to bootloader and other data + # 2M - BOOT_SPACE - kernel + # BOOT_SPACE - SDCARD_SIZE - rootfs + # + # The disk layout used is: + # + # 1M -> 2M - reserved to bootloader and other data + # 2M -> BOOT_SPACE - kernel and other data + # BOOT_SPACE -> SDIMG_SIZE - rootfs + # + # Default Free space = 1.3x + # Use IMAGE_OVERHEAD_FACTOR to add more space + # <---------> + # 4MiB 8MiB SDIMG_ROOTFS 4MiB + # <-----------------------> <-------------> <----------------------> <------------------------------> + # ---------------------------------------- ------------------------ ------------------------------- + # | | | |ROOTFS_SIZE | IMAGE_ROOTFS_ALIGNMENT | + # ---------------------------------------- ------------------------ ------------------------------- + # ^ ^ ^ ^ ^ ^ ^ + # | | | | | | | + # 0 1M 2M 4M 4MiB + BOOTSPACE 4MiB + BOOTSPACE + SDIMG_ROOTFS 4MiB + BOOTSPACE + SDIMG_ROOTFS + 4MiB + # + parted -s ${SDCARD} unit KiB mkpart primary 1024 2048 + parted -s ${SDCARD} unit KiB mkpart primary 2048 $(expr ${IMAGE_ROOTFS_ALIGNMENT} \+ ${BOOT_SPACE_ALIGNED}) + parted -s ${SDCARD} unit KiB mkpart primary $(expr ${IMAGE_ROOTFS_ALIGNMENT} \+ ${BOOT_SPACE_ALIGNED}) $(expr ${IMAGE_ROOTFS_ALIGNMENT} \+ ${BOOT_SPACE_ALIGNED} \+ $ROOTFS_SIZE) + + dd if=${DEPLOY_DIR_IMAGE}/${IMAGE_NAME}.rootfs.uboot.mxsboot-sdcard of=${SDCARD} conv=notrunc seek=1 skip=${UBOOT_PADDING} bs=$(expr 1024 \* 1024) + BOOT_BLOCKS=$(LC_ALL=C parted -s ${SDCARD} unit b print \ + | awk '/ 2 / { print substr($4, 1, length($4 -1)) / 1024 }') + + mkfs.vfat -n "${BOOTDD_VOLUME_ID}" -S 512 -C ${WORKDIR}/boot.img $BOOT_BLOCKS + mcopy -i ${WORKDIR}/boot.img -s ${DEPLOY_DIR_IMAGE}/${KERNEL_IMAGETYPE}-${MACHINE}.bin ::/${KERNEL_IMAGETYPE} + if test -n "${KERNEL_DEVICETREE}"; then + for DTS_FILE in ${KERNEL_DEVICETREE}; do + DTS_BASE_NAME=`basename ${DTS_FILE} | awk -F "." '{print $1}'` + if [ -e "${KERNEL_IMAGETYPE}-${DTS_BASE_NAME}.dtb" ]; then + kernel_bin="`readlink ${KERNEL_IMAGETYPE}-${MACHINE}.bin`" + kernel_bin_for_dtb="`readlink ${KERNEL_IMAGETYPE}-${DTS_BASE_NAME}.dtb | sed "s,$DTS_BASE_NAME,${MACHINE},g;s,\.dtb$,.bin,g"`" + if [ $kernel_bin = $kernel_bin_for_dtb ]; then + mcopy -i ${WORKDIR}/boot.img -s ${DEPLOY_DIR_IMAGE}/${KERNEL_IMAGETYPE}-${DTS_BASE_NAME}.dtb ::/${DTS_BASE_NAME}.dtb + fi + fi + done + fi + + dd if=${WORKDIR}/boot.img of=${SDCARD} conv=notrunc seek=2 bs=$(expr 1024 \* 1024) + ;; + barebox) + # BAREBOX_ENV_SPACE is taken on BOOT_SPACE_ALIGNED but it doesn't really matter as long as the rootfs is aligned + parted -s ${SDCARD} unit KiB mkpart primary 1024 $(expr ${IMAGE_ROOTFS_ALIGNMENT} \+ ${BOOT_SPACE_ALIGNED} - ${BAREBOX_ENV_SPACE}) + parted -s ${SDCARD} unit KiB mkpart primary $(expr ${IMAGE_ROOTFS_ALIGNMENT} \+ ${BOOT_SPACE_ALIGNED} - ${BAREBOX_ENV_SPACE}) $(expr ${IMAGE_ROOTFS_ALIGNMENT} \+ ${BOOT_SPACE_ALIGNED}) + parted -s ${SDCARD} unit KiB mkpart primary $(expr ${IMAGE_ROOTFS_ALIGNMENT} \+ ${BOOT_SPACE_ALIGNED}) $(expr ${IMAGE_ROOTFS_ALIGNMENT} \+ ${BOOT_SPACE_ALIGNED} \+ $ROOTFS_SIZE) + + dd if=${DEPLOY_DIR_IMAGE}/${IMAGE_NAME}.barebox.mxsboot-sdcard of=${SDCARD} conv=notrunc seek=1 bs=$(expr 1024 \* 1024) + dd if=${DEPLOY_DIR_IMAGE}/bareboxenv-${MACHINE}.bin of=${SDCARD} conv=notrunc seek=$(expr ${IMAGE_ROOTFS_ALIGNMENT} \+ ${BOOT_SPACE_ALIGNED} - ${BAREBOX_ENV_SPACE}) bs=1024 + ;; + *) + bberror "Unkown IMAGE_BOOTLOADER value" + exit 1 + ;; + esac + + # Change partition type for mxs processor family + bbnote "Setting partition type to 0x53 as required for mxs' SoC family." + echo -n S | dd of=${SDCARD} bs=1 count=1 seek=450 conv=notrunc + + parted ${SDCARD} print + + dd if=${SDCARD_ROOTFS} of=${SDCARD} conv=notrunc seek=1 bs=$(expr ${BOOT_SPACE_ALIGNED} \* 1024 + ${IMAGE_ROOTFS_ALIGNMENT} \* 1024) && sync && sync +} + +IMAGE_CMD_sdcard () { + if [ -z "${SDCARD_ROOTFS}" ]; then + bberror "SDCARD_ROOTFS is undefined. To use sdcard image from Freescale's BSP it needs to be defined." + exit 1 + fi + + # Align boot partition and calculate total SD card image size + BOOT_SPACE_ALIGNED=$(expr ${BOOT_SPACE} + ${IMAGE_ROOTFS_ALIGNMENT} - 1) + BOOT_SPACE_ALIGNED=$(expr ${BOOT_SPACE_ALIGNED} - ${BOOT_SPACE_ALIGNED} % ${IMAGE_ROOTFS_ALIGNMENT}) + SDCARD_SIZE=$(expr ${IMAGE_ROOTFS_ALIGNMENT} + ${BOOT_SPACE_ALIGNED} + $ROOTFS_SIZE + ${IMAGE_ROOTFS_ALIGNMENT}) + + # Initialize a sparse file + dd if=/dev/zero of=${SDCARD} bs=1 count=0 seek=$(expr 1024 \* ${SDCARD_SIZE}) + + ${SDCARD_GENERATION_COMMAND} +} + +# The sdcard requires the rootfs filesystem to be built before using +# it so we must make this dependency explicit. +IMAGE_TYPEDEP_sdcard = "${@d.getVar('SDCARD_ROOTFS', 1).split('.')[-1]}" diff --git a/examples/yocto/meta-mini/conf/distro/lxt.conf b/examples/yocto/meta-mini/conf/distro/lxt.conf new file mode 100644 index 0000000..945fdbb --- /dev/null +++ b/examples/yocto/meta-mini/conf/distro/lxt.conf @@ -0,0 +1,122 @@ +# Distribution definition for: lxt +# +# Copyright (c) 2011, Intel Corporation. +# All rights reserved. +# +# This file is released under the MIT license as described in +# ../meta/COPYING.MIT. +# +# Poky-tiny is intended to define a tiny Linux system comprised of a +# Linux kernel tailored to support each specific MACHINE and busybox. +# Poky-tiny sets some basic policy to ensure a usable system while still +# keeping the rootfs and kernel image as small as possible. +# +# The policies defined are intended to meet the following goals: +# o Serial consoles only (no framebuffer or VGA console) +# o Basic support for IPV4 networking +# o Single user ash shell +# o Static images (no support for adding packages or libraries later) +# o Read-only or RAMFS root filesystem +# o Combined Linux kernel + rootfs in under 4MB +# o Allow the user to select between eglibc or uclibc with the TCLIBC variable +# +# This is currently a partial definition, the following tasks remain: +# [ ] Integrate linux-yocto-tiny ktype into linux-yocto +# [ ] Define linux-yocto-tiny configs for all supported BSPs +# [ ] Drop ldconfig from the installation +# [ ] Modify the runqemu scripts to work with ext2 parameter: +# runqemu qemux86 qemuparams="-nographic" bootparams="console=ttyS0,115200 root=0800" +# [ ] Modify busybox to allow for DISTRO_FEATURES-like confiruration + +require conf/distro/poky.conf +DISTRO = "lxt" + +# FIXME: consider adding a new "tiny" feature +#DISTRO_FEATURES_append = " tiny" + +# We can use packagegroup-core-boot, but in the future we may need a new packagegroup-core-tiny +#POKY_DEFAULT_EXTRA_RDEPENDS += "packagegroup-core-boot" +# Drop kernel-module-af-packet from RRECOMMENDS +POKY_DEFAULT_EXTRA_RRECOMMENDS = "" + +# FIXME: what should we do with this? +TCLIBCAPPEND = "" + +# Disable wide char support for ncurses as we don't include it in +# in the LIBC features below. +ENABLE_WIDEC="false" + +SANITY_TESTED_DISTROS = "Debian-unstable Debian-testing" + +# Drop native language support. This removes the +# eglibc->bash->gettext->libc-posix-clang-wchar dependency. +USE_NLS="no" + +# Reconfigure eglibc for a smaller installation +# Comment out any of the lines below to disable them in the build +#DISTRO_FEATURES_LIBC_TINY = "libc-posix-clang-wchar libc-posix-regexp\ +# libc-posix-regexp-glibc libc-libm libc-crypt libc-spawn" +#DISTRO_FEATURES_LIBC_TINY_append_x86-64 = " libc-libm-big" +# +## Required for "who" +#DISTRO_FEATURES_LIBC_MINIMAL = "libc-utmp libc-getlogin" +#DISTRO_FEATURES_LIBC_REGEX = "libc-posix-regexp" +#DISTRO_FEATURES_LIBC_NET = "libc-inet libc-nis" +# +#DISTRO_FEATURES_LIBC = "${DISTRO_FEATURES_LIBC_TINY} \ +# ${DISTRO_FEATURES_LIBC_MINIMAL} \ +# ${DISTRO_FEATURES_LIBC_REGEX} \ +# ${DISTRO_FEATURES_LIBC_NET} \ +# " + +# Enable LFS - see bug YOCTO #5865 +DISTRO_FEATURES_append_libc-uclibc = " largefile" + +# Use tmpdevfs and the busybox runtime services +VIRTUAL-RUNTIME_dev_manager = "" +VIRTUAL-RUNTIME_login_manager = "" +VIRTUAL-RUNTIME_init_manager = "tiny-init" +VIRTUAL-RUNTIME_keymaps = "" + +# FIXME: Consider adding "modules" to MACHINE_FEATURES and using that in +# packagegroup-core-base to select modutils-initscripts or not. Similar with "net" and +# netbase. + +# By default we only support ext2 and initramfs. We don't build live as that +# pulls in a lot of dependencies for the live image and the installer, like +# udev, grub, etc. These pull in gettext, which fails to build with wide +# character support. +IMAGE_FSTYPES = "sdcard ext3 tar.gz" + +# Drop v86d from qemu dependency list (we support serial) +# Drop grub from meta-intel BSPs +# FIXME: A different mechanism is needed here. We could define -tiny +# variants of all compatible machines, but that leads to a lot +# more machine configs to maintain long term. +MACHINE_ESSENTIAL_EXTRA_RDEPENDS = "" + +# The mtrace script included by eglibc is a perl script. This means the system +# will build perl in case this package is installed. Since we don't care about +# this script for the purposes of tiny, remove the dependency from here. +RDEPENDS_${PN}-mtrace_pn-eglibc = "" + +INHERIT += "blacklist" +PNBLACKLIST[build-appliance-image] = "not buildable with lxt" +PNBLACKLIST[core-image-base] = "not buildable with lxt" +PNBLACKLIST[core-image-clutter] = "not buildable with lxt" +PNBLACKLIST[core-image-directfb] = "not buildable with lxt" +PNBLACKLIST[core-image-full-cmdline] = "not buildable with lxt" +PNBLACKLIST[core-image-lsb] = "not buildable with lxt" +PNBLACKLIST[core-image-lsb-dev] = "not buildable with lxt" +PNBLACKLIST[core-image-lsb-sdk] = "not buildable with lxt" +PNBLACKLIST[core-image-rt] = "not buildable with lxt" +PNBLACKLIST[core-image-rt-sdk] = "not buildable with lxt" +PNBLACKLIST[core-image-sato] = "not buildable with lxt" +PNBLACKLIST[core-image-sato-dev] = "not buildable with lxt" +PNBLACKLIST[core-image-sato-sdk] = "not buildable with lxt" +PNBLACKLIST[core-image-x11] = "not buildable with lxt" +PNBLACKLIST[qt4e-demo-image] = "not buildable with lxt" +PNBLACKLIST[core-image-weston] = "not buildable with lxt" + +# Disable python usage in opkg-utils since it won't build with tiny config +PACKAGECONFIG_pn-opkg-utils = "" diff --git a/examples/yocto/meta-mini/conf/layer.conf b/examples/yocto/meta-mini/conf/layer.conf new file mode 100644 index 0000000..35caf4b --- /dev/null +++ b/examples/yocto/meta-mini/conf/layer.conf @@ -0,0 +1,12 @@ +# We have a conf and classes directory, add to BBPATH +BBPATH .= ":${LAYERDIR}" + +# We have recipes-* directories, add to BBFILES +BBFILES += "${LAYERDIR}/recipes-*/*/*.bb \ + ${LAYERDIR}/recipes-*/*/*.bbappend" + +LAYERDEPENDS_fsl-arm-extra = "core linutronix" + +BBFILE_COLLECTIONS += "mini" +BBFILE_PATTERN_mini = "^${LAYERDIR}/" +BBFILE_PRIORITY_mini = "7" diff --git a/examples/yocto/meta-mini/conf/machine/beaglebone-black.conf b/examples/yocto/meta-mini/conf/machine/beaglebone-black.conf new file mode 100644 index 0000000..8e6dbcd --- /dev/null +++ b/examples/yocto/meta-mini/conf/machine/beaglebone-black.conf @@ -0,0 +1,24 @@ +#@TYPE: Machine +#@NAME: BeagleBone Black +#@DESCRIPTION: Machine configuration for the http://beagleboard.org/bone board + +require conf/machine/include/ti33x.inc + +IMAGE_FSTYPES += "sdcard ext3 tar.gz" +EXTRA_IMAGEDEPENDS += "u-boot" + +SERIAL_CONSOLE = "115200 ttyO0" + +PREFERRED_PROVIDER_virtual/kernel = "linux-vanilla" +PREFERRED_PROVIDER_virtual/bootloader = "u-boot" +PREFERRED_PROVIDER_u-boot= "u-boot" + +SPL_BINARY = "MLO" +UBOOT_SUFFIX = "img" +UBOOT_MACHINE = "am335x_boneblack_config" +UBOOT_ENTRYPOINT = "0x80008000" +UBOOT_LOADADDRESS = "0x80008000" + +IMAGE_CLASSES += "image_sdcard" +SDCARD_ROOTFS ?= "${DEPLOY_DIR_IMAGE}/${IMAGE_NAME}.rootfs.ext3" +IMAGE_FSTYPES += "sdcard" diff --git a/examples/yocto/meta-mini/conf/machine/imx6qsabrelite.conf b/examples/yocto/meta-mini/conf/machine/imx6qsabrelite.conf new file mode 100644 index 0000000..90f6864 --- /dev/null +++ b/examples/yocto/meta-mini/conf/machine/imx6qsabrelite.conf @@ -0,0 +1,37 @@ +#@TYPE: Machine +#@NAME: SabreLite +#@SOC: i.MX6Q +#@DESCRIPTION: Machine configuration for Boundary Devices SabreLite +#@MAINTAINER: Manuel Traut + +include conf/machine/include/imx-base.inc +include conf/machine/include/tune-cortexa9.inc + +SOC_FAMILY = "mx6:mx6dl:mx6q" + +PREFERRED_PROVIDER_virtual/kernel = "linux-vanilla" +KERNEL_DEVICETREE = "imx6q-sabrelite.dtb" + +# Ensure boot scripts will be available at rootfs time +do_rootfs[depends] += "u-boot-script:do_deploy" + +# Boot scripts to install +BOOT_SCRIPTS = "6x_bootscript-${MACHINE}:6x_bootscript" + +UBOOT_MACHINE ?= "nitrogen6q_config" +SERIAL_CONSOLE = "115200 ttymxc1" + +IMAGE_FSTYPES += "tar.bz2 ext3" + +# avoid this error +# ERROR: QA Issue: eglibc-locale: Files/directories were installed but not +# shipped +# /usr/bin +# /usr/lib +# /usr/share/i18n +# /usr/share/i18n/locales +# /usr/share/i18n/locales/POSIX +ENABLE_BINARY_LOCALE_GENERATION = "0" + +# custom init process +# APPEND = "${APPEND} init=/usr/bin/hello" diff --git a/examples/yocto/meta-mini/conf/machine/include/fsl-default-settings.inc b/examples/yocto/meta-mini/conf/machine/include/fsl-default-settings.inc new file mode 100644 index 0000000..b36e75a --- /dev/null +++ b/examples/yocto/meta-mini/conf/machine/include/fsl-default-settings.inc @@ -0,0 +1,3 @@ +# Freescale BSP default settings + +IMAGE_CLASSES += "image_types_fsl" diff --git a/examples/yocto/meta-mini/conf/machine/include/imx-base.inc b/examples/yocto/meta-mini/conf/machine/include/imx-base.inc new file mode 100644 index 0000000..247eb62 --- /dev/null +++ b/examples/yocto/meta-mini/conf/machine/include/imx-base.inc @@ -0,0 +1,30 @@ +# Provides the i.MX common settings + +include conf/machine/include/fsl-default-settings.inc +include conf/machine/include/soc-family.inc + +# Set specific make target and binary suffix +UBOOT_MAKE_TARGET = "u-boot.imx" +UBOOT_SUFFIX ?= "imx" + +UBOOT_ENTRYPOINT_mx6 = "0x10008000" + +# Float-Point setting +DEFAULTTUNE_mx6 ?= "cortexa9hf-neon" + +# Sub-architecture support +MACHINE_SOCARCH ?= "" +MACHINE_SOCARCH_mx6 = "${TUNE_PKGARCH}-mx6" +PACKAGE_EXTRA_ARCHS_append = " ${MACHINE_SOCARCH}" + +MACHINE_ARCH_FILTER = "virtual/kernel" +INHERIT += "fsl-dynamic-packagearch" + +SDCARD_ROOTFS ?= "${DEPLOY_DIR_IMAGE}/${IMAGE_NAME}.rootfs.ext3" +IMAGE_FSTYPES ?= "tar.bz2 ext3 sdcard" + +SERIAL_CONSOLE = "115200 ttymxc0" + +KERNEL_IMAGETYPE = "uImage" + +MACHINE_FEATURES = "" diff --git a/examples/yocto/meta-mini/conf/machine/include/imx6sabreauto-common.inc b/examples/yocto/meta-mini/conf/machine/include/imx6sabreauto-common.inc new file mode 100644 index 0000000..e35bc82 --- /dev/null +++ b/examples/yocto/meta-mini/conf/machine/include/imx6sabreauto-common.inc @@ -0,0 +1,6 @@ +# Provides the i.MX6 SABRE AUTO common settings + +require conf/machine/include/imx-base.inc +require conf/machine/include/tune-cortexa9.inc + +SERIAL_CONSOLE = "115200 ttymxc3" diff --git a/examples/yocto/meta-mini/conf/machine/include/imx6sabresd-common.inc b/examples/yocto/meta-mini/conf/machine/include/imx6sabresd-common.inc new file mode 100644 index 0000000..21a23b8 --- /dev/null +++ b/examples/yocto/meta-mini/conf/machine/include/imx6sabresd-common.inc @@ -0,0 +1,6 @@ +# Provides the i.MX6 SABRE SD common settings + +require conf/machine/include/imx-base.inc +require conf/machine/include/tune-cortexa9.inc + +SERIAL_CONSOLE = "115200 ttymxc0" diff --git a/examples/yocto/meta-mini/conf/machine/include/ti33x.inc b/examples/yocto/meta-mini/conf/machine/include/ti33x.inc new file mode 100644 index 0000000..6e47a6d --- /dev/null +++ b/examples/yocto/meta-mini/conf/machine/include/ti33x.inc @@ -0,0 +1,22 @@ +SOC_FAMILY = "ti33x" +require conf/machine/include/soc-family.inc + +DEFAULTTUNE ?= "cortexa8thf-neon" +require conf/machine/include/tune-cortexa8.inc + +KERNEL_IMAGETYPE = "zImage" + +UBOOT_ARCH = "arm" +UBOOT_MACHINE = "am335x_evm_config" + +UBOOT_ENTRYPOINT = "0x80008000" +UBOOT_LOADADDRESS = "0x80008000" + +# Use the expected value of the ubifs filesystem's volume name in the kernel +# and u-boot. +UBI_VOLNAME = "rootfs" + +# EXTRA_IMAGEDEPENDS += "u-boot" + +# List common SoC features, may need to add touchscreen for specific machines +MACHINE_FEATURES = " " diff --git a/examples/yocto/meta-mini/recipes-bsp/mini-image/maxi-mini-image.bb b/examples/yocto/meta-mini/recipes-bsp/mini-image/maxi-mini-image.bb new file mode 100644 index 0000000..3808764 --- /dev/null +++ b/examples/yocto/meta-mini/recipes-bsp/mini-image/maxi-mini-image.bb @@ -0,0 +1,3 @@ +require /home/local/src/poky/meta-mini/recipes-bsp/mini-image/mini-image.bb +IMAGE_INSTALL = "glibc hello hellocm autohello" +DESCRIPTION = "" diff --git a/examples/yocto/meta-mini/recipes-bsp/mini-image/mini-image.bb b/examples/yocto/meta-mini/recipes-bsp/mini-image/mini-image.bb new file mode 100644 index 0000000..e2536a9 --- /dev/null +++ b/examples/yocto/meta-mini/recipes-bsp/mini-image/mini-image.bb @@ -0,0 +1,3 @@ +IMAGE_LINGUAS = " " +inherit core-image +IMAGE_INSTALL += "sysvinit" diff --git a/examples/yocto/meta-mini/recipes-bsp/mini-image/tiny-image.bb b/examples/yocto/meta-mini/recipes-bsp/mini-image/tiny-image.bb new file mode 100644 index 0000000..ad787d5 --- /dev/null +++ b/examples/yocto/meta-mini/recipes-bsp/mini-image/tiny-image.bb @@ -0,0 +1,3 @@ +require recipes-bsp/mini-image/mini-image.bb +IMAGE_INSTALL = "eglibc hello hellocm autohello" +DESCRIPTION = "" diff --git a/examples/yocto/meta-mini/recipes-bsp/u-boot/u-boot-script_git.bb b/examples/yocto/meta-mini/recipes-bsp/u-boot/u-boot-script_git.bb new file mode 100644 index 0000000..c0b88e1 --- /dev/null +++ b/examples/yocto/meta-mini/recipes-bsp/u-boot/u-boot-script_git.bb @@ -0,0 +1,63 @@ +LICENSE = "GPLv2+" +LIC_FILES_CHKSUM = "file://Licenses/README;md5=025bf9f768cbcb1a165dbe1a110babfb" +DEPENDS = "u-boot-mkimage-native" + +PV = "v2014.01+git${SRCPV}" + +SRCREV = "aed9475361820a65e37ed936c833322cbbc0f2b5" +SRCBRANCH = "v2014.04-20140419" +SRC_URI = "git://github.com/boundarydevices/u-boot-imx6.git;protocol=https;branch=${SRCBRANCH}" + +S = "${WORKDIR}/git" + +inherit deploy + +do_mkimage () { + + # allow deploy to use the ${MACHINE} name to simplify things + if [ ! -d board/boundary/${MACHINE} ]; then + mkdir board/boundary/${MACHINE} + fi + bootscript=board/boundary/nitrogen6x/6x_bootscript-yocto.txt; + if ! [ -f $bootscript ]; then + bootscript=board/boundary/nitrogen6x/6x_bootscript-yocto.txt; + fi + echo "bootscript == $bootscript" + + upgradescript=board/boundary/nitrogen6x/6x_upgrade.txt; + if ! [ -f $upgradescript ]; then + upgradescript=board/boundary/nitrogen6x/6x_upgrade.txt; + fi + + uboot-mkimage -A arm -O linux -T script -C none -a 0 -e 0 \ + -n "boot script" -d $bootscript \ + board/boundary/${MACHINE}/6x_bootscript + + uboot-mkimage -A arm -O linux -T script -C none -a 0 -e 0 \ + -n "upgrade script" -d $upgradescript \ + board/boundary/${MACHINE}/6x_upgrade +} + +addtask mkimage after do_compile before do_install + +do_deploy () { + install -d ${DEPLOYDIR} + install ${S}/board/boundary/${MACHINE}/6x_bootscript \ + ${DEPLOYDIR}/6x_bootscript-${MACHINE}-${PV}-${PR} + install ${S}/board/boundary/${MACHINE}/6x_upgrade \ + ${DEPLOYDIR}/6x_upgrade-${MACHINE}-${PV}-${PR} + + cd ${DEPLOYDIR} + rm -f 6x_bootscript-${MACHINE} 6x_upgrade-${MACHINE} + ln -sf 6x_bootscript-${MACHINE}-${PV}-${PR} 6x_bootscript-${MACHINE} + ln -sf 6x_upgrade-${MACHINE}-${PV}-${PR} 6x_upgrade-${MACHINE} +} + +addtask deploy after do_install before do_build + +do_compile[noexec] = "1" +do_install[noexec] = "1" +do_populate_sysroot[noexec] = "1" + +PACKAGE_ARCH = "${MACHINE_ARCH}" +COMPATIBLE_MACHINE = "(imx6qsabrelite)" diff --git a/examples/yocto/meta-mini/recipes-bsp/u-boot/u-boot.inc b/examples/yocto/meta-mini/recipes-bsp/u-boot/u-boot.inc new file mode 100644 index 0000000..f49bb5d --- /dev/null +++ b/examples/yocto/meta-mini/recipes-bsp/u-boot/u-boot.inc @@ -0,0 +1,88 @@ +SUMMARY = "Universal Boot Loader for embedded devices" +HOMEPAGE = "http://www.denx.de/wiki/U-Boot/WebHome" +SECTION = "bootloaders" +PROVIDES = "virtual/bootloader" + +inherit uboot-config deploy + +EXTRA_OEMAKE = 'CROSS_COMPILE=${TARGET_PREFIX} CC="${TARGET_PREFIX}gcc ${TOOLCHAIN_OPTIONS}"' + +# Allow setting an additional version string that will be picked up by the +# u-boot build system and appended to the u-boot version. If the .scmversion +# file already exists it will not be overwritten. +UBOOT_LOCALVERSION ?= "" + +# Some versions of u-boot use .bin and others use .img. By default use .bin +# but enable individual recipes to change this value. +UBOOT_SUFFIX ?= "bin" +UBOOT_IMAGE ?= "u-boot-${MACHINE}-${PV}-${PR}.${UBOOT_SUFFIX}" +UBOOT_BINARY ?= "u-boot.${UBOOT_SUFFIX}" +UBOOT_SYMLINK ?= "u-boot-${MACHINE}.${UBOOT_SUFFIX}" +UBOOT_MAKE_TARGET ?= "all" + +# Some versions of u-boot build an SPL (Second Program Loader) image that +# should be packaged along with the u-boot binary as well as placed in the +# deploy directory. For those versions they can set the following variables +# to allow packaging the SPL. +SPL_BINARY ?= "" +SPL_IMAGE ?= "${SPL_BINARY}-${MACHINE}-${PV}-${PR}" +SPL_SYMLINK ?= "${SPL_BINARY}-${MACHINE}" + +do_compile () { + if [ "${@base_contains('DISTRO_FEATURES', 'ld-is-gold', 'ld-is-gold', '', d)}" = "ld-is-gold" ] ; then + sed -i 's/$(CROSS_COMPILE)ld$/$(CROSS_COMPILE)ld.bfd/g' config.mk + fi + + unset LDFLAGS + unset CFLAGS + unset CPPFLAGS + + if [ ! -e ${B}/.scmversion -a ! -e ${S}/.scmversion ] + then + echo ${UBOOT_LOCALVERSION} > ${B}/.scmversion + echo ${UBOOT_LOCALVERSION} > ${S}/.scmversion + fi + + oe_runmake ${UBOOT_MACHINE} + oe_runmake ${UBOOT_MAKE_TARGET} +} + +do_install () { + install -d ${D}/boot + install ${S}/${UBOOT_BINARY} ${D}/boot/${UBOOT_IMAGE} + ln -sf ${UBOOT_IMAGE} ${D}/boot/${UBOOT_BINARY} + + if [ -e ${WORKDIR}/fw_env.config ] ; then + install -d ${D}${sysconfdir} + install -m 644 ${WORKDIR}/fw_env.config ${D}${sysconfdir}/fw_env.config + fi + + if [ "x${SPL_BINARY}" != "x" ] + then + install ${S}/${SPL_BINARY} ${D}/boot/${SPL_IMAGE} + ln -sf ${SPL_IMAGE} ${D}/boot/${SPL_BINARY} + fi +} + +FILES_${PN} = "/boot ${sysconfdir}" +FILESPATH =. "${FILE_DIRNAME}/u-boot-git/${MACHINE}:" + +do_deploy () { + install -d ${DEPLOYDIR} + install ${S}/${UBOOT_BINARY} ${DEPLOYDIR}/${UBOOT_IMAGE} + + cd ${DEPLOYDIR} + rm -f ${UBOOT_BINARY} ${UBOOT_SYMLINK} + ln -sf ${UBOOT_IMAGE} ${UBOOT_SYMLINK} + ln -sf ${UBOOT_IMAGE} ${UBOOT_BINARY} + + if [ "x${SPL_BINARY}" != "x" ] + then + install ${S}/${SPL_BINARY} ${DEPLOYDIR}/${SPL_IMAGE} + rm -f ${DEPLOYDIR}/${SPL_BINARY} ${DEPLOYDIR}/${SPL_SYMLINK} + ln -sf ${SPL_IMAGE} ${DEPLOYDIR}/${SPL_BINARY} + ln -sf ${SPL_IMAGE} ${DEPLOYDIR}/${SPL_SYMLINK} + fi +} + +addtask deploy before do_build after do_compile diff --git a/examples/yocto/meta-mini/recipes-bsp/u-boot/u-boot_2014.07.bb b/examples/yocto/meta-mini/recipes-bsp/u-boot/u-boot_2014.07.bb new file mode 100644 index 0000000..e53f51e --- /dev/null +++ b/examples/yocto/meta-mini/recipes-bsp/u-boot/u-boot_2014.07.bb @@ -0,0 +1,26 @@ +require u-boot.inc + +# To build u-boot for your machine, provide the following lines in your machine +# config, replacing the assignments as appropriate for your machine. +# UBOOT_MACHINE = "omap3_beagle_config" +# UBOOT_ENTRYPOINT = "0x80008000" +# UBOOT_LOADADDRESS = "0x80008000" + +LICENSE = "GPLv2+" +LIC_FILES_CHKSUM = "file://README;beginline=1;endline=6;md5=157ab8408beab40cd8ce1dc69f702a6c" + +# This revision corresponds to the tag "v2013.07" +# We use the revision in order to avoid having to fetch it from the repo during parse +SRCREV = "524123a70761110c5cf3ccc5f52f6d4da071b959" + +PV = "v2014.07+git${SRCPV}" + +SRC_URI = "git://git.denx.de/u-boot.git;branch=master" + +S = "${WORKDIR}/git" + +PACKAGE_ARCH = "${MACHINE_ARCH}" + +do_deploy_append () { + echo "bootpart=0" > ${DEPLOYDIR}/uEnv.txt +} diff --git a/examples/yocto/meta-mini/recipes-core/eglibc/eglibc-locale_2.19.bbappend b/examples/yocto/meta-mini/recipes-core/eglibc/eglibc-locale_2.19.bbappend new file mode 100644 index 0000000..51f69e5 --- /dev/null +++ b/examples/yocto/meta-mini/recipes-core/eglibc/eglibc-locale_2.19.bbappend @@ -0,0 +1,2 @@ +do_package_qa () { +} diff --git a/examples/yocto/meta-mini/recipes-hello/autohello/autohello_1.0.bb b/examples/yocto/meta-mini/recipes-hello/autohello/autohello_1.0.bb new file mode 100644 index 0000000..e9c79f9 --- /dev/null +++ b/examples/yocto/meta-mini/recipes-hello/autohello/autohello_1.0.bb @@ -0,0 +1,9 @@ +DESCRIPTION = "GNU Helloworld application" +SECTION = "examples" +LICENSE = "GPLv2+" +LIC_FILES_CHKSUM = "file://COPYING;md5=d32239bcb673463ab874e80d47fae504" +PR = "r0" + +SRC_URI = "file://autohello-${PV}.tar.gz" +SRC_URI[md5sum] = "4bfc9bed4d5d67a266d93e99e5883211" +inherit autotools diff --git a/examples/yocto/meta-mini/recipes-hello/autohello/autohello_1.1.bb b/examples/yocto/meta-mini/recipes-hello/autohello/autohello_1.1.bb new file mode 100644 index 0000000..96d92f4 --- /dev/null +++ b/examples/yocto/meta-mini/recipes-hello/autohello/autohello_1.1.bb @@ -0,0 +1,8 @@ +DESCRIPTION = "GNU Helloworld application" +SECTION = "examples" +LICENSE = "GPLv2+" +LIC_FILES_CHKSUM = "file://COPYING;md5=d32239bcb673463ab874e80d47fae504" +PR = "r0" + +SRC_URI = "file://autohello-${PV}.tar.gz" +inherit autotools diff --git a/examples/yocto/meta-mini/recipes-hello/autohello/files/autohello-1.0.tar.gz b/examples/yocto/meta-mini/recipes-hello/autohello/files/autohello-1.0.tar.gz new file mode 100644 index 0000000..424b53c Binary files /dev/null and b/examples/yocto/meta-mini/recipes-hello/autohello/files/autohello-1.0.tar.gz differ diff --git a/examples/yocto/meta-mini/recipes-hello/autohello/files/autohello-1.1.tar.gz b/examples/yocto/meta-mini/recipes-hello/autohello/files/autohello-1.1.tar.gz new file mode 100644 index 0000000..60e820c Binary files /dev/null and b/examples/yocto/meta-mini/recipes-hello/autohello/files/autohello-1.1.tar.gz differ diff --git a/examples/yocto/meta-mini/recipes-hello/autohello/files/autohello/.deps/autohello.Po b/examples/yocto/meta-mini/recipes-hello/autohello/files/autohello/.deps/autohello.Po new file mode 100644 index 0000000..9ce06a8 --- /dev/null +++ b/examples/yocto/meta-mini/recipes-hello/autohello/files/autohello/.deps/autohello.Po @@ -0,0 +1 @@ +# dummy diff --git a/examples/yocto/meta-mini/recipes-hello/autohello/files/autohello/AUTHORS b/examples/yocto/meta-mini/recipes-hello/autohello/files/autohello/AUTHORS new file mode 100644 index 0000000..e69de29 diff --git a/examples/yocto/meta-mini/recipes-hello/autohello/files/autohello/COPYING b/examples/yocto/meta-mini/recipes-hello/autohello/files/autohello/COPYING new file mode 120000 index 0000000..caeca07 --- /dev/null +++ b/examples/yocto/meta-mini/recipes-hello/autohello/files/autohello/COPYING @@ -0,0 +1 @@ +/usr/share/automake-1.14/COPYING \ No newline at end of file diff --git a/examples/yocto/meta-mini/recipes-hello/autohello/files/autohello/ChangeLog b/examples/yocto/meta-mini/recipes-hello/autohello/files/autohello/ChangeLog new file mode 100644 index 0000000..e69de29 diff --git a/examples/yocto/meta-mini/recipes-hello/autohello/files/autohello/INSTALL b/examples/yocto/meta-mini/recipes-hello/autohello/files/autohello/INSTALL new file mode 120000 index 0000000..f812f5a --- /dev/null +++ b/examples/yocto/meta-mini/recipes-hello/autohello/files/autohello/INSTALL @@ -0,0 +1 @@ +/usr/share/automake-1.14/INSTALL \ No newline at end of file diff --git a/examples/yocto/meta-mini/recipes-hello/autohello/files/autohello/Makefile b/examples/yocto/meta-mini/recipes-hello/autohello/files/autohello/Makefile new file mode 100644 index 0000000..b693fd1 --- /dev/null +++ b/examples/yocto/meta-mini/recipes-hello/autohello/files/autohello/Makefile @@ -0,0 +1,736 @@ +# Makefile.in generated by automake 1.14.1 from Makefile.am. +# Makefile. Generated from Makefile.in by configure. + +# Copyright (C) 1994-2013 Free Software Foundation, Inc. + +# This Makefile.in is free software; the Free Software Foundation +# gives unlimited permission to copy and/or distribute it, +# with or without modifications, as long as this notice is preserved. + +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY, to the extent permitted by law; without +# even the implied warranty of MERCHANTABILITY or FITNESS FOR A +# PARTICULAR PURPOSE. + + + + +am__is_gnu_make = test -n '$(MAKEFILE_LIST)' && test -n '$(MAKELEVEL)' +am__make_running_with_option = \ + case $${target_option-} in \ + ?) ;; \ + *) echo "am__make_running_with_option: internal error: invalid" \ + "target option '$${target_option-}' specified" >&2; \ + exit 1;; \ + esac; \ + has_opt=no; \ + sane_makeflags=$$MAKEFLAGS; \ + if $(am__is_gnu_make); then \ + sane_makeflags=$$MFLAGS; \ + else \ + case $$MAKEFLAGS in \ + *\\[\ \ ]*) \ + bs=\\; \ + sane_makeflags=`printf '%s\n' "$$MAKEFLAGS" \ + | sed "s/$$bs$$bs[$$bs $$bs ]*//g"`;; \ + esac; \ + fi; \ + skip_next=no; \ + strip_trailopt () \ + { \ + flg=`printf '%s\n' "$$flg" | sed "s/$$1.*$$//"`; \ + }; \ + for flg in $$sane_makeflags; do \ + test $$skip_next = yes && { skip_next=no; continue; }; \ + case $$flg in \ + *=*|--*) continue;; \ + -*I) strip_trailopt 'I'; skip_next=yes;; \ + -*I?*) strip_trailopt 'I';; \ + -*O) strip_trailopt 'O'; skip_next=yes;; \ + -*O?*) strip_trailopt 'O';; \ + -*l) strip_trailopt 'l'; skip_next=yes;; \ + -*l?*) strip_trailopt 'l';; \ + -[dEDm]) skip_next=yes;; \ + -[JT]) skip_next=yes;; \ + esac; \ + case $$flg in \ + *$$target_option*) has_opt=yes; break;; \ + esac; \ + done; \ + test $$has_opt = yes +am__make_dryrun = (target_option=n; $(am__make_running_with_option)) +am__make_keepgoing = (target_option=k; $(am__make_running_with_option)) +pkgdatadir = $(datadir)/autohello +pkgincludedir = $(includedir)/autohello +pkglibdir = $(libdir)/autohello +pkglibexecdir = $(libexecdir)/autohello +am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd +install_sh_DATA = $(install_sh) -c -m 644 +install_sh_PROGRAM = $(install_sh) -c +install_sh_SCRIPT = $(install_sh) -c +INSTALL_HEADER = $(INSTALL_DATA) +transform = $(program_transform_name) +NORMAL_INSTALL = : +PRE_INSTALL = : +POST_INSTALL = : +NORMAL_UNINSTALL = : +PRE_UNINSTALL = : +POST_UNINSTALL = : +bin_PROGRAMS = autohello$(EXEEXT) +subdir = . +DIST_COMMON = INSTALL NEWS README AUTHORS ChangeLog \ + $(srcdir)/Makefile.in $(srcdir)/Makefile.am \ + $(top_srcdir)/configure $(am__configure_deps) \ + $(srcdir)/config.h.in depcomp COPYING compile install-sh \ + missing +ACLOCAL_M4 = $(top_srcdir)/aclocal.m4 +am__aclocal_m4_deps = $(top_srcdir)/configure.ac +am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \ + $(ACLOCAL_M4) +am__CONFIG_DISTCLEAN_FILES = config.status config.cache config.log \ + configure.lineno config.status.lineno +mkinstalldirs = $(install_sh) -d +CONFIG_HEADER = config.h +CONFIG_CLEAN_FILES = +CONFIG_CLEAN_VPATH_FILES = +am__installdirs = "$(DESTDIR)$(bindir)" +PROGRAMS = $(bin_PROGRAMS) +am_autohello_OBJECTS = autohello.$(OBJEXT) +autohello_OBJECTS = $(am_autohello_OBJECTS) +autohello_LDADD = $(LDADD) +AM_V_P = $(am__v_P_$(V)) +am__v_P_ = $(am__v_P_$(AM_DEFAULT_VERBOSITY)) +am__v_P_0 = false +am__v_P_1 = : +AM_V_GEN = $(am__v_GEN_$(V)) +am__v_GEN_ = $(am__v_GEN_$(AM_DEFAULT_VERBOSITY)) +am__v_GEN_0 = @echo " GEN " $@; +am__v_GEN_1 = +AM_V_at = $(am__v_at_$(V)) +am__v_at_ = $(am__v_at_$(AM_DEFAULT_VERBOSITY)) +am__v_at_0 = @ +am__v_at_1 = +DEFAULT_INCLUDES = -I. +depcomp = $(SHELL) $(top_srcdir)/depcomp +am__depfiles_maybe = depfiles +am__mv = mv -f +COMPILE = $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) \ + $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) +AM_V_CC = $(am__v_CC_$(V)) +am__v_CC_ = $(am__v_CC_$(AM_DEFAULT_VERBOSITY)) +am__v_CC_0 = @echo " CC " $@; +am__v_CC_1 = +CCLD = $(CC) +LINK = $(CCLD) $(AM_CFLAGS) $(CFLAGS) $(AM_LDFLAGS) $(LDFLAGS) -o $@ +AM_V_CCLD = $(am__v_CCLD_$(V)) +am__v_CCLD_ = $(am__v_CCLD_$(AM_DEFAULT_VERBOSITY)) +am__v_CCLD_0 = @echo " CCLD " $@; +am__v_CCLD_1 = +SOURCES = $(autohello_SOURCES) +DIST_SOURCES = $(autohello_SOURCES) +am__can_run_installinfo = \ + case $$AM_UPDATE_INFO_DIR in \ + n|no|NO) false;; \ + *) (install-info --version) >/dev/null 2>&1;; \ + esac +am__tagged_files = $(HEADERS) $(SOURCES) $(TAGS_FILES) \ + $(LISP)config.h.in +# Read a list of newline-separated strings from the standard input, +# and print each of them once, without duplicates. Input order is +# *not* preserved. +am__uniquify_input = $(AWK) '\ + BEGIN { nonempty = 0; } \ + { items[$$0] = 1; nonempty = 1; } \ + END { if (nonempty) { for (i in items) print i; }; } \ +' +# Make sure the list of sources is unique. This is necessary because, +# e.g., the same source file might be shared among _SOURCES variables +# for different programs/libraries. +am__define_uniq_tagged_files = \ + list='$(am__tagged_files)'; \ + unique=`for i in $$list; do \ + if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \ + done | $(am__uniquify_input)` +ETAGS = etags +CTAGS = ctags +CSCOPE = cscope +AM_RECURSIVE_TARGETS = cscope +DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST) +distdir = $(PACKAGE)-$(VERSION) +top_distdir = $(distdir) +am__remove_distdir = \ + if test -d "$(distdir)"; then \ + find "$(distdir)" -type d ! -perm -200 -exec chmod u+w {} ';' \ + && rm -rf "$(distdir)" \ + || { sleep 5 && rm -rf "$(distdir)"; }; \ + else :; fi +am__post_remove_distdir = $(am__remove_distdir) +DIST_ARCHIVES = $(distdir).tar.gz +GZIP_ENV = --best +DIST_TARGETS = dist-gzip +distuninstallcheck_listfiles = find . -type f -print +am__distuninstallcheck_listfiles = $(distuninstallcheck_listfiles) \ + | sed 's|^\./|$(prefix)/|' | grep -v '$(infodir)/dir$$' +distcleancheck_listfiles = find . -type f -print +ACLOCAL = ${SHELL} /home/local/src/poky/meta-linutronix/recipes-hello/autohello/files/autohello/missing aclocal-1.14 +AMTAR = $${TAR-tar} +AM_DEFAULT_VERBOSITY = 1 +AUTOCONF = ${SHELL} /home/local/src/poky/meta-linutronix/recipes-hello/autohello/files/autohello/missing autoconf +AUTOHEADER = ${SHELL} /home/local/src/poky/meta-linutronix/recipes-hello/autohello/files/autohello/missing autoheader +AUTOMAKE = ${SHELL} /home/local/src/poky/meta-linutronix/recipes-hello/autohello/files/autohello/missing automake-1.14 +AWK = gawk +CC = gcc +CCDEPMODE = depmode=gcc3 +CFLAGS = -g -O2 +CPPFLAGS = +CYGPATH_W = echo +DEFS = -DHAVE_CONFIG_H +DEPDIR = .deps +ECHO_C = +ECHO_N = -n +ECHO_T = +EXEEXT = +INSTALL = /usr/bin/install -c +INSTALL_DATA = ${INSTALL} -m 644 +INSTALL_PROGRAM = ${INSTALL} +INSTALL_SCRIPT = ${INSTALL} +INSTALL_STRIP_PROGRAM = $(install_sh) -c -s +LDFLAGS = +LIBOBJS = +LIBS = +LTLIBOBJS = +MAKEINFO = ${SHELL} /home/local/src/poky/meta-linutronix/recipes-hello/autohello/files/autohello/missing makeinfo +MKDIR_P = /bin/mkdir -p +OBJEXT = o +PACKAGE = autohello +PACKAGE_BUGREPORT = maunt@linutronix.de +PACKAGE_NAME = autohello +PACKAGE_STRING = autohello 1.1 +PACKAGE_TARNAME = autohello +PACKAGE_URL = +PACKAGE_VERSION = 1.1 +PATH_SEPARATOR = : +SET_MAKE = +SHELL = /bin/bash +STRIP = +VERSION = 1.1 +abs_builddir = /home/local/src/poky/meta-linutronix/recipes-hello/autohello/files/autohello +abs_srcdir = /home/local/src/poky/meta-linutronix/recipes-hello/autohello/files/autohello +abs_top_builddir = /home/local/src/poky/meta-linutronix/recipes-hello/autohello/files/autohello +abs_top_srcdir = /home/local/src/poky/meta-linutronix/recipes-hello/autohello/files/autohello +ac_ct_CC = gcc +am__include = include +am__leading_dot = . +am__quote = +am__tar = $${TAR-tar} chof - "$$tardir" +am__untar = $${TAR-tar} xf - +bindir = ${exec_prefix}/bin +build_alias = +builddir = . +datadir = ${datarootdir} +datarootdir = ${prefix}/share +docdir = ${datarootdir}/doc/${PACKAGE_TARNAME} +dvidir = ${docdir} +exec_prefix = ${prefix} +host_alias = +htmldir = ${docdir} +includedir = ${prefix}/include +infodir = ${datarootdir}/info +install_sh = ${SHELL} /home/local/src/poky/meta-linutronix/recipes-hello/autohello/files/autohello/install-sh +libdir = ${exec_prefix}/lib +libexecdir = ${exec_prefix}/libexec +localedir = ${datarootdir}/locale +localstatedir = ${prefix}/var +mandir = ${datarootdir}/man +mkdir_p = $(MKDIR_P) +oldincludedir = /usr/include +pdfdir = ${docdir} +prefix = /usr/local +program_transform_name = s,x,x, +psdir = ${docdir} +sbindir = ${exec_prefix}/sbin +sharedstatedir = ${prefix}/com +srcdir = . +sysconfdir = ${prefix}/etc +target_alias = +top_build_prefix = +top_builddir = . +top_srcdir = . +autohello_SOURCES = autohello.c +all: config.h + $(MAKE) $(AM_MAKEFLAGS) all-am + +.SUFFIXES: +.SUFFIXES: .c .o .obj +am--refresh: Makefile + @: +$(srcdir)/Makefile.in: $(srcdir)/Makefile.am $(am__configure_deps) + @for dep in $?; do \ + case '$(am__configure_deps)' in \ + *$$dep*) \ + echo ' cd $(srcdir) && $(AUTOMAKE) --gnu'; \ + $(am__cd) $(srcdir) && $(AUTOMAKE) --gnu \ + && exit 0; \ + exit 1;; \ + esac; \ + done; \ + echo ' cd $(top_srcdir) && $(AUTOMAKE) --gnu Makefile'; \ + $(am__cd) $(top_srcdir) && \ + $(AUTOMAKE) --gnu Makefile +.PRECIOUS: Makefile +Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status + @case '$?' in \ + *config.status*) \ + echo ' $(SHELL) ./config.status'; \ + $(SHELL) ./config.status;; \ + *) \ + echo ' cd $(top_builddir) && $(SHELL) ./config.status $@ $(am__depfiles_maybe)'; \ + cd $(top_builddir) && $(SHELL) ./config.status $@ $(am__depfiles_maybe);; \ + esac; + +$(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES) + $(SHELL) ./config.status --recheck + +$(top_srcdir)/configure: $(am__configure_deps) + $(am__cd) $(srcdir) && $(AUTOCONF) +$(ACLOCAL_M4): $(am__aclocal_m4_deps) + $(am__cd) $(srcdir) && $(ACLOCAL) $(ACLOCAL_AMFLAGS) +$(am__aclocal_m4_deps): + +config.h: stamp-h1 + @test -f $@ || rm -f stamp-h1 + @test -f $@ || $(MAKE) $(AM_MAKEFLAGS) stamp-h1 + +stamp-h1: $(srcdir)/config.h.in $(top_builddir)/config.status + @rm -f stamp-h1 + cd $(top_builddir) && $(SHELL) ./config.status config.h +$(srcdir)/config.h.in: $(am__configure_deps) + ($(am__cd) $(top_srcdir) && $(AUTOHEADER)) + rm -f stamp-h1 + touch $@ + +distclean-hdr: + -rm -f config.h stamp-h1 +install-binPROGRAMS: $(bin_PROGRAMS) + @$(NORMAL_INSTALL) + @list='$(bin_PROGRAMS)'; test -n "$(bindir)" || list=; \ + if test -n "$$list"; then \ + echo " $(MKDIR_P) '$(DESTDIR)$(bindir)'"; \ + $(MKDIR_P) "$(DESTDIR)$(bindir)" || exit 1; \ + fi; \ + for p in $$list; do echo "$$p $$p"; done | \ + sed 's/$(EXEEXT)$$//' | \ + while read p p1; do if test -f $$p \ + ; then echo "$$p"; echo "$$p"; else :; fi; \ + done | \ + sed -e 'p;s,.*/,,;n;h' \ + -e 's|.*|.|' \ + -e 'p;x;s,.*/,,;s/$(EXEEXT)$$//;$(transform);s/$$/$(EXEEXT)/' | \ + sed 'N;N;N;s,\n, ,g' | \ + $(AWK) 'BEGIN { files["."] = ""; dirs["."] = 1 } \ + { d=$$3; if (dirs[d] != 1) { print "d", d; dirs[d] = 1 } \ + if ($$2 == $$4) files[d] = files[d] " " $$1; \ + else { print "f", $$3 "/" $$4, $$1; } } \ + END { for (d in files) print "f", d, files[d] }' | \ + while read type dir files; do \ + if test "$$dir" = .; then dir=; else dir=/$$dir; fi; \ + test -z "$$files" || { \ + echo " $(INSTALL_PROGRAM_ENV) $(INSTALL_PROGRAM) $$files '$(DESTDIR)$(bindir)$$dir'"; \ + $(INSTALL_PROGRAM_ENV) $(INSTALL_PROGRAM) $$files "$(DESTDIR)$(bindir)$$dir" || exit $$?; \ + } \ + ; done + +uninstall-binPROGRAMS: + @$(NORMAL_UNINSTALL) + @list='$(bin_PROGRAMS)'; test -n "$(bindir)" || list=; \ + files=`for p in $$list; do echo "$$p"; done | \ + sed -e 'h;s,^.*/,,;s/$(EXEEXT)$$//;$(transform)' \ + -e 's/$$/$(EXEEXT)/' \ + `; \ + test -n "$$list" || exit 0; \ + echo " ( cd '$(DESTDIR)$(bindir)' && rm -f" $$files ")"; \ + cd "$(DESTDIR)$(bindir)" && rm -f $$files + +clean-binPROGRAMS: + -test -z "$(bin_PROGRAMS)" || rm -f $(bin_PROGRAMS) + +autohello$(EXEEXT): $(autohello_OBJECTS) $(autohello_DEPENDENCIES) $(EXTRA_autohello_DEPENDENCIES) + @rm -f autohello$(EXEEXT) + $(AM_V_CCLD)$(LINK) $(autohello_OBJECTS) $(autohello_LDADD) $(LIBS) + +mostlyclean-compile: + -rm -f *.$(OBJEXT) + +distclean-compile: + -rm -f *.tab.c + +include ./$(DEPDIR)/autohello.Po + +.c.o: + $(AM_V_CC)$(COMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ $< + $(AM_V_at)$(am__mv) $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po +# $(AM_V_CC)source='$<' object='$@' libtool=no \ +# DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) \ +# $(AM_V_CC_no)$(COMPILE) -c -o $@ $< + +.c.obj: + $(AM_V_CC)$(COMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ `$(CYGPATH_W) '$<'` + $(AM_V_at)$(am__mv) $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po +# $(AM_V_CC)source='$<' object='$@' libtool=no \ +# DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) \ +# $(AM_V_CC_no)$(COMPILE) -c -o $@ `$(CYGPATH_W) '$<'` + +ID: $(am__tagged_files) + $(am__define_uniq_tagged_files); mkid -fID $$unique +tags: tags-am +TAGS: tags + +tags-am: $(TAGS_DEPENDENCIES) $(am__tagged_files) + set x; \ + here=`pwd`; \ + $(am__define_uniq_tagged_files); \ + shift; \ + if test -z "$(ETAGS_ARGS)$$*$$unique"; then :; else \ + test -n "$$unique" || unique=$$empty_fix; \ + if test $$# -gt 0; then \ + $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \ + "$$@" $$unique; \ + else \ + $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \ + $$unique; \ + fi; \ + fi +ctags: ctags-am + +CTAGS: ctags +ctags-am: $(TAGS_DEPENDENCIES) $(am__tagged_files) + $(am__define_uniq_tagged_files); \ + test -z "$(CTAGS_ARGS)$$unique" \ + || $(CTAGS) $(CTAGSFLAGS) $(AM_CTAGSFLAGS) $(CTAGS_ARGS) \ + $$unique + +GTAGS: + here=`$(am__cd) $(top_builddir) && pwd` \ + && $(am__cd) $(top_srcdir) \ + && gtags -i $(GTAGS_ARGS) "$$here" +cscope: cscope.files + test ! -s cscope.files \ + || $(CSCOPE) -b -q $(AM_CSCOPEFLAGS) $(CSCOPEFLAGS) -i cscope.files $(CSCOPE_ARGS) +clean-cscope: + -rm -f cscope.files +cscope.files: clean-cscope cscopelist +cscopelist: cscopelist-am + +cscopelist-am: $(am__tagged_files) + list='$(am__tagged_files)'; \ + case "$(srcdir)" in \ + [\\/]* | ?:[\\/]*) sdir="$(srcdir)" ;; \ + *) sdir=$(subdir)/$(srcdir) ;; \ + esac; \ + for i in $$list; do \ + if test -f "$$i"; then \ + echo "$(subdir)/$$i"; \ + else \ + echo "$$sdir/$$i"; \ + fi; \ + done >> $(top_builddir)/cscope.files + +distclean-tags: + -rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags + -rm -f cscope.out cscope.in.out cscope.po.out cscope.files + +distdir: $(DISTFILES) + $(am__remove_distdir) + test -d "$(distdir)" || mkdir "$(distdir)" + @srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \ + topsrcdirstrip=`echo "$(top_srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \ + list='$(DISTFILES)'; \ + dist_files=`for file in $$list; do echo $$file; done | \ + sed -e "s|^$$srcdirstrip/||;t" \ + -e "s|^$$topsrcdirstrip/|$(top_builddir)/|;t"`; \ + case $$dist_files in \ + */*) $(MKDIR_P) `echo "$$dist_files" | \ + sed '/\//!d;s|^|$(distdir)/|;s,/[^/]*$$,,' | \ + sort -u` ;; \ + esac; \ + for file in $$dist_files; do \ + if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \ + if test -d $$d/$$file; then \ + dir=`echo "/$$file" | sed -e 's,/[^/]*$$,,'`; \ + if test -d "$(distdir)/$$file"; then \ + find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \ + fi; \ + if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \ + cp -fpR $(srcdir)/$$file "$(distdir)$$dir" || exit 1; \ + find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \ + fi; \ + cp -fpR $$d/$$file "$(distdir)$$dir" || exit 1; \ + else \ + test -f "$(distdir)/$$file" \ + || cp -p $$d/$$file "$(distdir)/$$file" \ + || exit 1; \ + fi; \ + done + -test -n "$(am__skip_mode_fix)" \ + || find "$(distdir)" -type d ! -perm -755 \ + -exec chmod u+rwx,go+rx {} \; -o \ + ! -type d ! -perm -444 -links 1 -exec chmod a+r {} \; -o \ + ! -type d ! -perm -400 -exec chmod a+r {} \; -o \ + ! -type d ! -perm -444 -exec $(install_sh) -c -m a+r {} {} \; \ + || chmod -R a+r "$(distdir)" +dist-gzip: distdir + tardir=$(distdir) && $(am__tar) | GZIP=$(GZIP_ENV) gzip -c >$(distdir).tar.gz + $(am__post_remove_distdir) + +dist-bzip2: distdir + tardir=$(distdir) && $(am__tar) | BZIP2=$${BZIP2--9} bzip2 -c >$(distdir).tar.bz2 + $(am__post_remove_distdir) + +dist-lzip: distdir + tardir=$(distdir) && $(am__tar) | lzip -c $${LZIP_OPT--9} >$(distdir).tar.lz + $(am__post_remove_distdir) + +dist-xz: distdir + tardir=$(distdir) && $(am__tar) | XZ_OPT=$${XZ_OPT--e} xz -c >$(distdir).tar.xz + $(am__post_remove_distdir) + +dist-tarZ: distdir + @echo WARNING: "Support for shar distribution archives is" \ + "deprecated." >&2 + @echo WARNING: "It will be removed altogether in Automake 2.0" >&2 + tardir=$(distdir) && $(am__tar) | compress -c >$(distdir).tar.Z + $(am__post_remove_distdir) + +dist-shar: distdir + @echo WARNING: "Support for distribution archives compressed with" \ + "legacy program 'compress' is deprecated." >&2 + @echo WARNING: "It will be removed altogether in Automake 2.0" >&2 + shar $(distdir) | GZIP=$(GZIP_ENV) gzip -c >$(distdir).shar.gz + $(am__post_remove_distdir) + +dist-zip: distdir + -rm -f $(distdir).zip + zip -rq $(distdir).zip $(distdir) + $(am__post_remove_distdir) + +dist dist-all: + $(MAKE) $(AM_MAKEFLAGS) $(DIST_TARGETS) am__post_remove_distdir='@:' + $(am__post_remove_distdir) + +# This target untars the dist file and tries a VPATH configuration. Then +# it guarantees that the distribution is self-contained by making another +# tarfile. +distcheck: dist + case '$(DIST_ARCHIVES)' in \ + *.tar.gz*) \ + GZIP=$(GZIP_ENV) gzip -dc $(distdir).tar.gz | $(am__untar) ;;\ + *.tar.bz2*) \ + bzip2 -dc $(distdir).tar.bz2 | $(am__untar) ;;\ + *.tar.lz*) \ + lzip -dc $(distdir).tar.lz | $(am__untar) ;;\ + *.tar.xz*) \ + xz -dc $(distdir).tar.xz | $(am__untar) ;;\ + *.tar.Z*) \ + uncompress -c $(distdir).tar.Z | $(am__untar) ;;\ + *.shar.gz*) \ + GZIP=$(GZIP_ENV) gzip -dc $(distdir).shar.gz | unshar ;;\ + *.zip*) \ + unzip $(distdir).zip ;;\ + esac + chmod -R a-w $(distdir) + chmod u+w $(distdir) + mkdir $(distdir)/_build $(distdir)/_inst + chmod a-w $(distdir) + test -d $(distdir)/_build || exit 0; \ + dc_install_base=`$(am__cd) $(distdir)/_inst && pwd | sed -e 's,^[^:\\/]:[\\/],/,'` \ + && dc_destdir="$${TMPDIR-/tmp}/am-dc-$$$$/" \ + && am__cwd=`pwd` \ + && $(am__cd) $(distdir)/_build \ + && ../configure \ + $(AM_DISTCHECK_CONFIGURE_FLAGS) \ + $(DISTCHECK_CONFIGURE_FLAGS) \ + --srcdir=.. --prefix="$$dc_install_base" \ + && $(MAKE) $(AM_MAKEFLAGS) \ + && $(MAKE) $(AM_MAKEFLAGS) dvi \ + && $(MAKE) $(AM_MAKEFLAGS) check \ + && $(MAKE) $(AM_MAKEFLAGS) install \ + && $(MAKE) $(AM_MAKEFLAGS) installcheck \ + && $(MAKE) $(AM_MAKEFLAGS) uninstall \ + && $(MAKE) $(AM_MAKEFLAGS) distuninstallcheck_dir="$$dc_install_base" \ + distuninstallcheck \ + && chmod -R a-w "$$dc_install_base" \ + && ({ \ + (cd ../.. && umask 077 && mkdir "$$dc_destdir") \ + && $(MAKE) $(AM_MAKEFLAGS) DESTDIR="$$dc_destdir" install \ + && $(MAKE) $(AM_MAKEFLAGS) DESTDIR="$$dc_destdir" uninstall \ + && $(MAKE) $(AM_MAKEFLAGS) DESTDIR="$$dc_destdir" \ + distuninstallcheck_dir="$$dc_destdir" distuninstallcheck; \ + } || { rm -rf "$$dc_destdir"; exit 1; }) \ + && rm -rf "$$dc_destdir" \ + && $(MAKE) $(AM_MAKEFLAGS) dist \ + && rm -rf $(DIST_ARCHIVES) \ + && $(MAKE) $(AM_MAKEFLAGS) distcleancheck \ + && cd "$$am__cwd" \ + || exit 1 + $(am__post_remove_distdir) + @(echo "$(distdir) archives ready for distribution: "; \ + list='$(DIST_ARCHIVES)'; for i in $$list; do echo $$i; done) | \ + sed -e 1h -e 1s/./=/g -e 1p -e 1x -e '$$p' -e '$$x' +distuninstallcheck: + @test -n '$(distuninstallcheck_dir)' || { \ + echo 'ERROR: trying to run $@ with an empty' \ + '$$(distuninstallcheck_dir)' >&2; \ + exit 1; \ + }; \ + $(am__cd) '$(distuninstallcheck_dir)' || { \ + echo 'ERROR: cannot chdir into $(distuninstallcheck_dir)' >&2; \ + exit 1; \ + }; \ + test `$(am__distuninstallcheck_listfiles) | wc -l` -eq 0 \ + || { echo "ERROR: files left after uninstall:" ; \ + if test -n "$(DESTDIR)"; then \ + echo " (check DESTDIR support)"; \ + fi ; \ + $(distuninstallcheck_listfiles) ; \ + exit 1; } >&2 +distcleancheck: distclean + @if test '$(srcdir)' = . ; then \ + echo "ERROR: distcleancheck can only run from a VPATH build" ; \ + exit 1 ; \ + fi + @test `$(distcleancheck_listfiles) | wc -l` -eq 0 \ + || { echo "ERROR: files left in build directory after distclean:" ; \ + $(distcleancheck_listfiles) ; \ + exit 1; } >&2 +check-am: all-am +check: check-am +all-am: Makefile $(PROGRAMS) config.h +installdirs: + for dir in "$(DESTDIR)$(bindir)"; do \ + test -z "$$dir" || $(MKDIR_P) "$$dir"; \ + done +install: install-am +install-exec: install-exec-am +install-data: install-data-am +uninstall: uninstall-am + +install-am: all-am + @$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am + +installcheck: installcheck-am +install-strip: + if test -z '$(STRIP)'; then \ + $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \ + install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \ + install; \ + else \ + $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \ + install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \ + "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'" install; \ + fi +mostlyclean-generic: + +clean-generic: + +distclean-generic: + -test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES) + -test . = "$(srcdir)" || test -z "$(CONFIG_CLEAN_VPATH_FILES)" || rm -f $(CONFIG_CLEAN_VPATH_FILES) + +maintainer-clean-generic: + @echo "This command is intended for maintainers to use" + @echo "it deletes files that may require special tools to rebuild." +clean: clean-am + +clean-am: clean-binPROGRAMS clean-generic mostlyclean-am + +distclean: distclean-am + -rm -f $(am__CONFIG_DISTCLEAN_FILES) + -rm -rf ./$(DEPDIR) + -rm -f Makefile +distclean-am: clean-am distclean-compile distclean-generic \ + distclean-hdr distclean-tags + +dvi: dvi-am + +dvi-am: + +html: html-am + +html-am: + +info: info-am + +info-am: + +install-data-am: + +install-dvi: install-dvi-am + +install-dvi-am: + +install-exec-am: install-binPROGRAMS + +install-html: install-html-am + +install-html-am: + +install-info: install-info-am + +install-info-am: + +install-man: + +install-pdf: install-pdf-am + +install-pdf-am: + +install-ps: install-ps-am + +install-ps-am: + +installcheck-am: + +maintainer-clean: maintainer-clean-am + -rm -f $(am__CONFIG_DISTCLEAN_FILES) + -rm -rf $(top_srcdir)/autom4te.cache + -rm -rf ./$(DEPDIR) + -rm -f Makefile +maintainer-clean-am: distclean-am maintainer-clean-generic + +mostlyclean: mostlyclean-am + +mostlyclean-am: mostlyclean-compile mostlyclean-generic + +pdf: pdf-am + +pdf-am: + +ps: ps-am + +ps-am: + +uninstall-am: uninstall-binPROGRAMS + +.MAKE: all install-am install-strip + +.PHONY: CTAGS GTAGS TAGS all all-am am--refresh check check-am clean \ + clean-binPROGRAMS clean-cscope clean-generic cscope \ + cscopelist-am ctags ctags-am dist dist-all dist-bzip2 \ + dist-gzip dist-lzip dist-shar dist-tarZ dist-xz dist-zip \ + distcheck distclean distclean-compile distclean-generic \ + distclean-hdr distclean-tags distcleancheck distdir \ + distuninstallcheck dvi dvi-am html html-am info info-am \ + install install-am install-binPROGRAMS install-data \ + install-data-am install-dvi install-dvi-am install-exec \ + install-exec-am install-html install-html-am install-info \ + install-info-am install-man install-pdf install-pdf-am \ + install-ps install-ps-am install-strip installcheck \ + installcheck-am installdirs maintainer-clean \ + maintainer-clean-generic mostlyclean mostlyclean-compile \ + mostlyclean-generic pdf pdf-am ps ps-am tags tags-am uninstall \ + uninstall-am uninstall-binPROGRAMS + + +# Tell versions [3.59,3.63) of GNU make to not export all variables. +# Otherwise a system limit (for SysV at least) may be exceeded. +.NOEXPORT: diff --git a/examples/yocto/meta-mini/recipes-hello/autohello/files/autohello/Makefile.am b/examples/yocto/meta-mini/recipes-hello/autohello/files/autohello/Makefile.am new file mode 100644 index 0000000..1b344bc --- /dev/null +++ b/examples/yocto/meta-mini/recipes-hello/autohello/files/autohello/Makefile.am @@ -0,0 +1,2 @@ +bin_PROGRAMS = autohello +autohello_SOURCES = autohello.c diff --git a/examples/yocto/meta-mini/recipes-hello/autohello/files/autohello/Makefile.in b/examples/yocto/meta-mini/recipes-hello/autohello/files/autohello/Makefile.in new file mode 100644 index 0000000..d09fe13 --- /dev/null +++ b/examples/yocto/meta-mini/recipes-hello/autohello/files/autohello/Makefile.in @@ -0,0 +1,736 @@ +# Makefile.in generated by automake 1.14.1 from Makefile.am. +# @configure_input@ + +# Copyright (C) 1994-2013 Free Software Foundation, Inc. + +# This Makefile.in is free software; the Free Software Foundation +# gives unlimited permission to copy and/or distribute it, +# with or without modifications, as long as this notice is preserved. + +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY, to the extent permitted by law; without +# even the implied warranty of MERCHANTABILITY or FITNESS FOR A +# PARTICULAR PURPOSE. + +@SET_MAKE@ + +VPATH = @srcdir@ +am__is_gnu_make = test -n '$(MAKEFILE_LIST)' && test -n '$(MAKELEVEL)' +am__make_running_with_option = \ + case $${target_option-} in \ + ?) ;; \ + *) echo "am__make_running_with_option: internal error: invalid" \ + "target option '$${target_option-}' specified" >&2; \ + exit 1;; \ + esac; \ + has_opt=no; \ + sane_makeflags=$$MAKEFLAGS; \ + if $(am__is_gnu_make); then \ + sane_makeflags=$$MFLAGS; \ + else \ + case $$MAKEFLAGS in \ + *\\[\ \ ]*) \ + bs=\\; \ + sane_makeflags=`printf '%s\n' "$$MAKEFLAGS" \ + | sed "s/$$bs$$bs[$$bs $$bs ]*//g"`;; \ + esac; \ + fi; \ + skip_next=no; \ + strip_trailopt () \ + { \ + flg=`printf '%s\n' "$$flg" | sed "s/$$1.*$$//"`; \ + }; \ + for flg in $$sane_makeflags; do \ + test $$skip_next = yes && { skip_next=no; continue; }; \ + case $$flg in \ + *=*|--*) continue;; \ + -*I) strip_trailopt 'I'; skip_next=yes;; \ + -*I?*) strip_trailopt 'I';; \ + -*O) strip_trailopt 'O'; skip_next=yes;; \ + -*O?*) strip_trailopt 'O';; \ + -*l) strip_trailopt 'l'; skip_next=yes;; \ + -*l?*) strip_trailopt 'l';; \ + -[dEDm]) skip_next=yes;; \ + -[JT]) skip_next=yes;; \ + esac; \ + case $$flg in \ + *$$target_option*) has_opt=yes; break;; \ + esac; \ + done; \ + test $$has_opt = yes +am__make_dryrun = (target_option=n; $(am__make_running_with_option)) +am__make_keepgoing = (target_option=k; $(am__make_running_with_option)) +pkgdatadir = $(datadir)/@PACKAGE@ +pkgincludedir = $(includedir)/@PACKAGE@ +pkglibdir = $(libdir)/@PACKAGE@ +pkglibexecdir = $(libexecdir)/@PACKAGE@ +am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd +install_sh_DATA = $(install_sh) -c -m 644 +install_sh_PROGRAM = $(install_sh) -c +install_sh_SCRIPT = $(install_sh) -c +INSTALL_HEADER = $(INSTALL_DATA) +transform = $(program_transform_name) +NORMAL_INSTALL = : +PRE_INSTALL = : +POST_INSTALL = : +NORMAL_UNINSTALL = : +PRE_UNINSTALL = : +POST_UNINSTALL = : +bin_PROGRAMS = autohello$(EXEEXT) +subdir = . +DIST_COMMON = INSTALL NEWS README AUTHORS ChangeLog \ + $(srcdir)/Makefile.in $(srcdir)/Makefile.am \ + $(top_srcdir)/configure $(am__configure_deps) \ + $(srcdir)/config.h.in depcomp COPYING compile install-sh \ + missing +ACLOCAL_M4 = $(top_srcdir)/aclocal.m4 +am__aclocal_m4_deps = $(top_srcdir)/configure.ac +am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \ + $(ACLOCAL_M4) +am__CONFIG_DISTCLEAN_FILES = config.status config.cache config.log \ + configure.lineno config.status.lineno +mkinstalldirs = $(install_sh) -d +CONFIG_HEADER = config.h +CONFIG_CLEAN_FILES = +CONFIG_CLEAN_VPATH_FILES = +am__installdirs = "$(DESTDIR)$(bindir)" +PROGRAMS = $(bin_PROGRAMS) +am_autohello_OBJECTS = autohello.$(OBJEXT) +autohello_OBJECTS = $(am_autohello_OBJECTS) +autohello_LDADD = $(LDADD) +AM_V_P = $(am__v_P_@AM_V@) +am__v_P_ = $(am__v_P_@AM_DEFAULT_V@) +am__v_P_0 = false +am__v_P_1 = : +AM_V_GEN = $(am__v_GEN_@AM_V@) +am__v_GEN_ = $(am__v_GEN_@AM_DEFAULT_V@) +am__v_GEN_0 = @echo " GEN " $@; +am__v_GEN_1 = +AM_V_at = $(am__v_at_@AM_V@) +am__v_at_ = $(am__v_at_@AM_DEFAULT_V@) +am__v_at_0 = @ +am__v_at_1 = +DEFAULT_INCLUDES = -I.@am__isrc@ +depcomp = $(SHELL) $(top_srcdir)/depcomp +am__depfiles_maybe = depfiles +am__mv = mv -f +COMPILE = $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) \ + $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) +AM_V_CC = $(am__v_CC_@AM_V@) +am__v_CC_ = $(am__v_CC_@AM_DEFAULT_V@) +am__v_CC_0 = @echo " CC " $@; +am__v_CC_1 = +CCLD = $(CC) +LINK = $(CCLD) $(AM_CFLAGS) $(CFLAGS) $(AM_LDFLAGS) $(LDFLAGS) -o $@ +AM_V_CCLD = $(am__v_CCLD_@AM_V@) +am__v_CCLD_ = $(am__v_CCLD_@AM_DEFAULT_V@) +am__v_CCLD_0 = @echo " CCLD " $@; +am__v_CCLD_1 = +SOURCES = $(autohello_SOURCES) +DIST_SOURCES = $(autohello_SOURCES) +am__can_run_installinfo = \ + case $$AM_UPDATE_INFO_DIR in \ + n|no|NO) false;; \ + *) (install-info --version) >/dev/null 2>&1;; \ + esac +am__tagged_files = $(HEADERS) $(SOURCES) $(TAGS_FILES) \ + $(LISP)config.h.in +# Read a list of newline-separated strings from the standard input, +# and print each of them once, without duplicates. Input order is +# *not* preserved. +am__uniquify_input = $(AWK) '\ + BEGIN { nonempty = 0; } \ + { items[$$0] = 1; nonempty = 1; } \ + END { if (nonempty) { for (i in items) print i; }; } \ +' +# Make sure the list of sources is unique. This is necessary because, +# e.g., the same source file might be shared among _SOURCES variables +# for different programs/libraries. +am__define_uniq_tagged_files = \ + list='$(am__tagged_files)'; \ + unique=`for i in $$list; do \ + if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \ + done | $(am__uniquify_input)` +ETAGS = etags +CTAGS = ctags +CSCOPE = cscope +AM_RECURSIVE_TARGETS = cscope +DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST) +distdir = $(PACKAGE)-$(VERSION) +top_distdir = $(distdir) +am__remove_distdir = \ + if test -d "$(distdir)"; then \ + find "$(distdir)" -type d ! -perm -200 -exec chmod u+w {} ';' \ + && rm -rf "$(distdir)" \ + || { sleep 5 && rm -rf "$(distdir)"; }; \ + else :; fi +am__post_remove_distdir = $(am__remove_distdir) +DIST_ARCHIVES = $(distdir).tar.gz +GZIP_ENV = --best +DIST_TARGETS = dist-gzip +distuninstallcheck_listfiles = find . -type f -print +am__distuninstallcheck_listfiles = $(distuninstallcheck_listfiles) \ + | sed 's|^\./|$(prefix)/|' | grep -v '$(infodir)/dir$$' +distcleancheck_listfiles = find . -type f -print +ACLOCAL = @ACLOCAL@ +AMTAR = @AMTAR@ +AM_DEFAULT_VERBOSITY = @AM_DEFAULT_VERBOSITY@ +AUTOCONF = @AUTOCONF@ +AUTOHEADER = @AUTOHEADER@ +AUTOMAKE = @AUTOMAKE@ +AWK = @AWK@ +CC = @CC@ +CCDEPMODE = @CCDEPMODE@ +CFLAGS = @CFLAGS@ +CPPFLAGS = @CPPFLAGS@ +CYGPATH_W = @CYGPATH_W@ +DEFS = @DEFS@ +DEPDIR = @DEPDIR@ +ECHO_C = @ECHO_C@ +ECHO_N = @ECHO_N@ +ECHO_T = @ECHO_T@ +EXEEXT = @EXEEXT@ +INSTALL = @INSTALL@ +INSTALL_DATA = @INSTALL_DATA@ +INSTALL_PROGRAM = @INSTALL_PROGRAM@ +INSTALL_SCRIPT = @INSTALL_SCRIPT@ +INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@ +LDFLAGS = @LDFLAGS@ +LIBOBJS = @LIBOBJS@ +LIBS = @LIBS@ +LTLIBOBJS = @LTLIBOBJS@ +MAKEINFO = @MAKEINFO@ +MKDIR_P = @MKDIR_P@ +OBJEXT = @OBJEXT@ +PACKAGE = @PACKAGE@ +PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@ +PACKAGE_NAME = @PACKAGE_NAME@ +PACKAGE_STRING = @PACKAGE_STRING@ +PACKAGE_TARNAME = @PACKAGE_TARNAME@ +PACKAGE_URL = @PACKAGE_URL@ +PACKAGE_VERSION = @PACKAGE_VERSION@ +PATH_SEPARATOR = @PATH_SEPARATOR@ +SET_MAKE = @SET_MAKE@ +SHELL = @SHELL@ +STRIP = @STRIP@ +VERSION = @VERSION@ +abs_builddir = @abs_builddir@ +abs_srcdir = @abs_srcdir@ +abs_top_builddir = @abs_top_builddir@ +abs_top_srcdir = @abs_top_srcdir@ +ac_ct_CC = @ac_ct_CC@ +am__include = @am__include@ +am__leading_dot = @am__leading_dot@ +am__quote = @am__quote@ +am__tar = @am__tar@ +am__untar = @am__untar@ +bindir = @bindir@ +build_alias = @build_alias@ +builddir = @builddir@ +datadir = @datadir@ +datarootdir = @datarootdir@ +docdir = @docdir@ +dvidir = @dvidir@ +exec_prefix = @exec_prefix@ +host_alias = @host_alias@ +htmldir = @htmldir@ +includedir = @includedir@ +infodir = @infodir@ +install_sh = @install_sh@ +libdir = @libdir@ +libexecdir = @libexecdir@ +localedir = @localedir@ +localstatedir = @localstatedir@ +mandir = @mandir@ +mkdir_p = @mkdir_p@ +oldincludedir = @oldincludedir@ +pdfdir = @pdfdir@ +prefix = @prefix@ +program_transform_name = @program_transform_name@ +psdir = @psdir@ +sbindir = @sbindir@ +sharedstatedir = @sharedstatedir@ +srcdir = @srcdir@ +sysconfdir = @sysconfdir@ +target_alias = @target_alias@ +top_build_prefix = @top_build_prefix@ +top_builddir = @top_builddir@ +top_srcdir = @top_srcdir@ +autohello_SOURCES = autohello.c +all: config.h + $(MAKE) $(AM_MAKEFLAGS) all-am + +.SUFFIXES: +.SUFFIXES: .c .o .obj +am--refresh: Makefile + @: +$(srcdir)/Makefile.in: $(srcdir)/Makefile.am $(am__configure_deps) + @for dep in $?; do \ + case '$(am__configure_deps)' in \ + *$$dep*) \ + echo ' cd $(srcdir) && $(AUTOMAKE) --gnu'; \ + $(am__cd) $(srcdir) && $(AUTOMAKE) --gnu \ + && exit 0; \ + exit 1;; \ + esac; \ + done; \ + echo ' cd $(top_srcdir) && $(AUTOMAKE) --gnu Makefile'; \ + $(am__cd) $(top_srcdir) && \ + $(AUTOMAKE) --gnu Makefile +.PRECIOUS: Makefile +Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status + @case '$?' in \ + *config.status*) \ + echo ' $(SHELL) ./config.status'; \ + $(SHELL) ./config.status;; \ + *) \ + echo ' cd $(top_builddir) && $(SHELL) ./config.status $@ $(am__depfiles_maybe)'; \ + cd $(top_builddir) && $(SHELL) ./config.status $@ $(am__depfiles_maybe);; \ + esac; + +$(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES) + $(SHELL) ./config.status --recheck + +$(top_srcdir)/configure: $(am__configure_deps) + $(am__cd) $(srcdir) && $(AUTOCONF) +$(ACLOCAL_M4): $(am__aclocal_m4_deps) + $(am__cd) $(srcdir) && $(ACLOCAL) $(ACLOCAL_AMFLAGS) +$(am__aclocal_m4_deps): + +config.h: stamp-h1 + @test -f $@ || rm -f stamp-h1 + @test -f $@ || $(MAKE) $(AM_MAKEFLAGS) stamp-h1 + +stamp-h1: $(srcdir)/config.h.in $(top_builddir)/config.status + @rm -f stamp-h1 + cd $(top_builddir) && $(SHELL) ./config.status config.h +$(srcdir)/config.h.in: $(am__configure_deps) + ($(am__cd) $(top_srcdir) && $(AUTOHEADER)) + rm -f stamp-h1 + touch $@ + +distclean-hdr: + -rm -f config.h stamp-h1 +install-binPROGRAMS: $(bin_PROGRAMS) + @$(NORMAL_INSTALL) + @list='$(bin_PROGRAMS)'; test -n "$(bindir)" || list=; \ + if test -n "$$list"; then \ + echo " $(MKDIR_P) '$(DESTDIR)$(bindir)'"; \ + $(MKDIR_P) "$(DESTDIR)$(bindir)" || exit 1; \ + fi; \ + for p in $$list; do echo "$$p $$p"; done | \ + sed 's/$(EXEEXT)$$//' | \ + while read p p1; do if test -f $$p \ + ; then echo "$$p"; echo "$$p"; else :; fi; \ + done | \ + sed -e 'p;s,.*/,,;n;h' \ + -e 's|.*|.|' \ + -e 'p;x;s,.*/,,;s/$(EXEEXT)$$//;$(transform);s/$$/$(EXEEXT)/' | \ + sed 'N;N;N;s,\n, ,g' | \ + $(AWK) 'BEGIN { files["."] = ""; dirs["."] = 1 } \ + { d=$$3; if (dirs[d] != 1) { print "d", d; dirs[d] = 1 } \ + if ($$2 == $$4) files[d] = files[d] " " $$1; \ + else { print "f", $$3 "/" $$4, $$1; } } \ + END { for (d in files) print "f", d, files[d] }' | \ + while read type dir files; do \ + if test "$$dir" = .; then dir=; else dir=/$$dir; fi; \ + test -z "$$files" || { \ + echo " $(INSTALL_PROGRAM_ENV) $(INSTALL_PROGRAM) $$files '$(DESTDIR)$(bindir)$$dir'"; \ + $(INSTALL_PROGRAM_ENV) $(INSTALL_PROGRAM) $$files "$(DESTDIR)$(bindir)$$dir" || exit $$?; \ + } \ + ; done + +uninstall-binPROGRAMS: + @$(NORMAL_UNINSTALL) + @list='$(bin_PROGRAMS)'; test -n "$(bindir)" || list=; \ + files=`for p in $$list; do echo "$$p"; done | \ + sed -e 'h;s,^.*/,,;s/$(EXEEXT)$$//;$(transform)' \ + -e 's/$$/$(EXEEXT)/' \ + `; \ + test -n "$$list" || exit 0; \ + echo " ( cd '$(DESTDIR)$(bindir)' && rm -f" $$files ")"; \ + cd "$(DESTDIR)$(bindir)" && rm -f $$files + +clean-binPROGRAMS: + -test -z "$(bin_PROGRAMS)" || rm -f $(bin_PROGRAMS) + +autohello$(EXEEXT): $(autohello_OBJECTS) $(autohello_DEPENDENCIES) $(EXTRA_autohello_DEPENDENCIES) + @rm -f autohello$(EXEEXT) + $(AM_V_CCLD)$(LINK) $(autohello_OBJECTS) $(autohello_LDADD) $(LIBS) + +mostlyclean-compile: + -rm -f *.$(OBJEXT) + +distclean-compile: + -rm -f *.tab.c + +@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/autohello.Po@am__quote@ + +.c.o: +@am__fastdepCC_TRUE@ $(AM_V_CC)$(COMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ $< +@am__fastdepCC_TRUE@ $(AM_V_at)$(am__mv) $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po +@AMDEP_TRUE@@am__fastdepCC_FALSE@ $(AM_V_CC)source='$<' object='$@' libtool=no @AMDEPBACKSLASH@ +@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@ +@am__fastdepCC_FALSE@ $(AM_V_CC@am__nodep@)$(COMPILE) -c -o $@ $< + +.c.obj: +@am__fastdepCC_TRUE@ $(AM_V_CC)$(COMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ `$(CYGPATH_W) '$<'` +@am__fastdepCC_TRUE@ $(AM_V_at)$(am__mv) $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po +@AMDEP_TRUE@@am__fastdepCC_FALSE@ $(AM_V_CC)source='$<' object='$@' libtool=no @AMDEPBACKSLASH@ +@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@ +@am__fastdepCC_FALSE@ $(AM_V_CC@am__nodep@)$(COMPILE) -c -o $@ `$(CYGPATH_W) '$<'` + +ID: $(am__tagged_files) + $(am__define_uniq_tagged_files); mkid -fID $$unique +tags: tags-am +TAGS: tags + +tags-am: $(TAGS_DEPENDENCIES) $(am__tagged_files) + set x; \ + here=`pwd`; \ + $(am__define_uniq_tagged_files); \ + shift; \ + if test -z "$(ETAGS_ARGS)$$*$$unique"; then :; else \ + test -n "$$unique" || unique=$$empty_fix; \ + if test $$# -gt 0; then \ + $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \ + "$$@" $$unique; \ + else \ + $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \ + $$unique; \ + fi; \ + fi +ctags: ctags-am + +CTAGS: ctags +ctags-am: $(TAGS_DEPENDENCIES) $(am__tagged_files) + $(am__define_uniq_tagged_files); \ + test -z "$(CTAGS_ARGS)$$unique" \ + || $(CTAGS) $(CTAGSFLAGS) $(AM_CTAGSFLAGS) $(CTAGS_ARGS) \ + $$unique + +GTAGS: + here=`$(am__cd) $(top_builddir) && pwd` \ + && $(am__cd) $(top_srcdir) \ + && gtags -i $(GTAGS_ARGS) "$$here" +cscope: cscope.files + test ! -s cscope.files \ + || $(CSCOPE) -b -q $(AM_CSCOPEFLAGS) $(CSCOPEFLAGS) -i cscope.files $(CSCOPE_ARGS) +clean-cscope: + -rm -f cscope.files +cscope.files: clean-cscope cscopelist +cscopelist: cscopelist-am + +cscopelist-am: $(am__tagged_files) + list='$(am__tagged_files)'; \ + case "$(srcdir)" in \ + [\\/]* | ?:[\\/]*) sdir="$(srcdir)" ;; \ + *) sdir=$(subdir)/$(srcdir) ;; \ + esac; \ + for i in $$list; do \ + if test -f "$$i"; then \ + echo "$(subdir)/$$i"; \ + else \ + echo "$$sdir/$$i"; \ + fi; \ + done >> $(top_builddir)/cscope.files + +distclean-tags: + -rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags + -rm -f cscope.out cscope.in.out cscope.po.out cscope.files + +distdir: $(DISTFILES) + $(am__remove_distdir) + test -d "$(distdir)" || mkdir "$(distdir)" + @srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \ + topsrcdirstrip=`echo "$(top_srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \ + list='$(DISTFILES)'; \ + dist_files=`for file in $$list; do echo $$file; done | \ + sed -e "s|^$$srcdirstrip/||;t" \ + -e "s|^$$topsrcdirstrip/|$(top_builddir)/|;t"`; \ + case $$dist_files in \ + */*) $(MKDIR_P) `echo "$$dist_files" | \ + sed '/\//!d;s|^|$(distdir)/|;s,/[^/]*$$,,' | \ + sort -u` ;; \ + esac; \ + for file in $$dist_files; do \ + if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \ + if test -d $$d/$$file; then \ + dir=`echo "/$$file" | sed -e 's,/[^/]*$$,,'`; \ + if test -d "$(distdir)/$$file"; then \ + find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \ + fi; \ + if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \ + cp -fpR $(srcdir)/$$file "$(distdir)$$dir" || exit 1; \ + find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \ + fi; \ + cp -fpR $$d/$$file "$(distdir)$$dir" || exit 1; \ + else \ + test -f "$(distdir)/$$file" \ + || cp -p $$d/$$file "$(distdir)/$$file" \ + || exit 1; \ + fi; \ + done + -test -n "$(am__skip_mode_fix)" \ + || find "$(distdir)" -type d ! -perm -755 \ + -exec chmod u+rwx,go+rx {} \; -o \ + ! -type d ! -perm -444 -links 1 -exec chmod a+r {} \; -o \ + ! -type d ! -perm -400 -exec chmod a+r {} \; -o \ + ! -type d ! -perm -444 -exec $(install_sh) -c -m a+r {} {} \; \ + || chmod -R a+r "$(distdir)" +dist-gzip: distdir + tardir=$(distdir) && $(am__tar) | GZIP=$(GZIP_ENV) gzip -c >$(distdir).tar.gz + $(am__post_remove_distdir) + +dist-bzip2: distdir + tardir=$(distdir) && $(am__tar) | BZIP2=$${BZIP2--9} bzip2 -c >$(distdir).tar.bz2 + $(am__post_remove_distdir) + +dist-lzip: distdir + tardir=$(distdir) && $(am__tar) | lzip -c $${LZIP_OPT--9} >$(distdir).tar.lz + $(am__post_remove_distdir) + +dist-xz: distdir + tardir=$(distdir) && $(am__tar) | XZ_OPT=$${XZ_OPT--e} xz -c >$(distdir).tar.xz + $(am__post_remove_distdir) + +dist-tarZ: distdir + @echo WARNING: "Support for shar distribution archives is" \ + "deprecated." >&2 + @echo WARNING: "It will be removed altogether in Automake 2.0" >&2 + tardir=$(distdir) && $(am__tar) | compress -c >$(distdir).tar.Z + $(am__post_remove_distdir) + +dist-shar: distdir + @echo WARNING: "Support for distribution archives compressed with" \ + "legacy program 'compress' is deprecated." >&2 + @echo WARNING: "It will be removed altogether in Automake 2.0" >&2 + shar $(distdir) | GZIP=$(GZIP_ENV) gzip -c >$(distdir).shar.gz + $(am__post_remove_distdir) + +dist-zip: distdir + -rm -f $(distdir).zip + zip -rq $(distdir).zip $(distdir) + $(am__post_remove_distdir) + +dist dist-all: + $(MAKE) $(AM_MAKEFLAGS) $(DIST_TARGETS) am__post_remove_distdir='@:' + $(am__post_remove_distdir) + +# This target untars the dist file and tries a VPATH configuration. Then +# it guarantees that the distribution is self-contained by making another +# tarfile. +distcheck: dist + case '$(DIST_ARCHIVES)' in \ + *.tar.gz*) \ + GZIP=$(GZIP_ENV) gzip -dc $(distdir).tar.gz | $(am__untar) ;;\ + *.tar.bz2*) \ + bzip2 -dc $(distdir).tar.bz2 | $(am__untar) ;;\ + *.tar.lz*) \ + lzip -dc $(distdir).tar.lz | $(am__untar) ;;\ + *.tar.xz*) \ + xz -dc $(distdir).tar.xz | $(am__untar) ;;\ + *.tar.Z*) \ + uncompress -c $(distdir).tar.Z | $(am__untar) ;;\ + *.shar.gz*) \ + GZIP=$(GZIP_ENV) gzip -dc $(distdir).shar.gz | unshar ;;\ + *.zip*) \ + unzip $(distdir).zip ;;\ + esac + chmod -R a-w $(distdir) + chmod u+w $(distdir) + mkdir $(distdir)/_build $(distdir)/_inst + chmod a-w $(distdir) + test -d $(distdir)/_build || exit 0; \ + dc_install_base=`$(am__cd) $(distdir)/_inst && pwd | sed -e 's,^[^:\\/]:[\\/],/,'` \ + && dc_destdir="$${TMPDIR-/tmp}/am-dc-$$$$/" \ + && am__cwd=`pwd` \ + && $(am__cd) $(distdir)/_build \ + && ../configure \ + $(AM_DISTCHECK_CONFIGURE_FLAGS) \ + $(DISTCHECK_CONFIGURE_FLAGS) \ + --srcdir=.. --prefix="$$dc_install_base" \ + && $(MAKE) $(AM_MAKEFLAGS) \ + && $(MAKE) $(AM_MAKEFLAGS) dvi \ + && $(MAKE) $(AM_MAKEFLAGS) check \ + && $(MAKE) $(AM_MAKEFLAGS) install \ + && $(MAKE) $(AM_MAKEFLAGS) installcheck \ + && $(MAKE) $(AM_MAKEFLAGS) uninstall \ + && $(MAKE) $(AM_MAKEFLAGS) distuninstallcheck_dir="$$dc_install_base" \ + distuninstallcheck \ + && chmod -R a-w "$$dc_install_base" \ + && ({ \ + (cd ../.. && umask 077 && mkdir "$$dc_destdir") \ + && $(MAKE) $(AM_MAKEFLAGS) DESTDIR="$$dc_destdir" install \ + && $(MAKE) $(AM_MAKEFLAGS) DESTDIR="$$dc_destdir" uninstall \ + && $(MAKE) $(AM_MAKEFLAGS) DESTDIR="$$dc_destdir" \ + distuninstallcheck_dir="$$dc_destdir" distuninstallcheck; \ + } || { rm -rf "$$dc_destdir"; exit 1; }) \ + && rm -rf "$$dc_destdir" \ + && $(MAKE) $(AM_MAKEFLAGS) dist \ + && rm -rf $(DIST_ARCHIVES) \ + && $(MAKE) $(AM_MAKEFLAGS) distcleancheck \ + && cd "$$am__cwd" \ + || exit 1 + $(am__post_remove_distdir) + @(echo "$(distdir) archives ready for distribution: "; \ + list='$(DIST_ARCHIVES)'; for i in $$list; do echo $$i; done) | \ + sed -e 1h -e 1s/./=/g -e 1p -e 1x -e '$$p' -e '$$x' +distuninstallcheck: + @test -n '$(distuninstallcheck_dir)' || { \ + echo 'ERROR: trying to run $@ with an empty' \ + '$$(distuninstallcheck_dir)' >&2; \ + exit 1; \ + }; \ + $(am__cd) '$(distuninstallcheck_dir)' || { \ + echo 'ERROR: cannot chdir into $(distuninstallcheck_dir)' >&2; \ + exit 1; \ + }; \ + test `$(am__distuninstallcheck_listfiles) | wc -l` -eq 0 \ + || { echo "ERROR: files left after uninstall:" ; \ + if test -n "$(DESTDIR)"; then \ + echo " (check DESTDIR support)"; \ + fi ; \ + $(distuninstallcheck_listfiles) ; \ + exit 1; } >&2 +distcleancheck: distclean + @if test '$(srcdir)' = . ; then \ + echo "ERROR: distcleancheck can only run from a VPATH build" ; \ + exit 1 ; \ + fi + @test `$(distcleancheck_listfiles) | wc -l` -eq 0 \ + || { echo "ERROR: files left in build directory after distclean:" ; \ + $(distcleancheck_listfiles) ; \ + exit 1; } >&2 +check-am: all-am +check: check-am +all-am: Makefile $(PROGRAMS) config.h +installdirs: + for dir in "$(DESTDIR)$(bindir)"; do \ + test -z "$$dir" || $(MKDIR_P) "$$dir"; \ + done +install: install-am +install-exec: install-exec-am +install-data: install-data-am +uninstall: uninstall-am + +install-am: all-am + @$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am + +installcheck: installcheck-am +install-strip: + if test -z '$(STRIP)'; then \ + $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \ + install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \ + install; \ + else \ + $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \ + install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \ + "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'" install; \ + fi +mostlyclean-generic: + +clean-generic: + +distclean-generic: + -test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES) + -test . = "$(srcdir)" || test -z "$(CONFIG_CLEAN_VPATH_FILES)" || rm -f $(CONFIG_CLEAN_VPATH_FILES) + +maintainer-clean-generic: + @echo "This command is intended for maintainers to use" + @echo "it deletes files that may require special tools to rebuild." +clean: clean-am + +clean-am: clean-binPROGRAMS clean-generic mostlyclean-am + +distclean: distclean-am + -rm -f $(am__CONFIG_DISTCLEAN_FILES) + -rm -rf ./$(DEPDIR) + -rm -f Makefile +distclean-am: clean-am distclean-compile distclean-generic \ + distclean-hdr distclean-tags + +dvi: dvi-am + +dvi-am: + +html: html-am + +html-am: + +info: info-am + +info-am: + +install-data-am: + +install-dvi: install-dvi-am + +install-dvi-am: + +install-exec-am: install-binPROGRAMS + +install-html: install-html-am + +install-html-am: + +install-info: install-info-am + +install-info-am: + +install-man: + +install-pdf: install-pdf-am + +install-pdf-am: + +install-ps: install-ps-am + +install-ps-am: + +installcheck-am: + +maintainer-clean: maintainer-clean-am + -rm -f $(am__CONFIG_DISTCLEAN_FILES) + -rm -rf $(top_srcdir)/autom4te.cache + -rm -rf ./$(DEPDIR) + -rm -f Makefile +maintainer-clean-am: distclean-am maintainer-clean-generic + +mostlyclean: mostlyclean-am + +mostlyclean-am: mostlyclean-compile mostlyclean-generic + +pdf: pdf-am + +pdf-am: + +ps: ps-am + +ps-am: + +uninstall-am: uninstall-binPROGRAMS + +.MAKE: all install-am install-strip + +.PHONY: CTAGS GTAGS TAGS all all-am am--refresh check check-am clean \ + clean-binPROGRAMS clean-cscope clean-generic cscope \ + cscopelist-am ctags ctags-am dist dist-all dist-bzip2 \ + dist-gzip dist-lzip dist-shar dist-tarZ dist-xz dist-zip \ + distcheck distclean distclean-compile distclean-generic \ + distclean-hdr distclean-tags distcleancheck distdir \ + distuninstallcheck dvi dvi-am html html-am info info-am \ + install install-am install-binPROGRAMS install-data \ + install-data-am install-dvi install-dvi-am install-exec \ + install-exec-am install-html install-html-am install-info \ + install-info-am install-man install-pdf install-pdf-am \ + install-ps install-ps-am install-strip installcheck \ + installcheck-am installdirs maintainer-clean \ + maintainer-clean-generic mostlyclean mostlyclean-compile \ + mostlyclean-generic pdf pdf-am ps ps-am tags tags-am uninstall \ + uninstall-am uninstall-binPROGRAMS + + +# Tell versions [3.59,3.63) of GNU make to not export all variables. +# Otherwise a system limit (for SysV at least) may be exceeded. +.NOEXPORT: diff --git a/examples/yocto/meta-mini/recipes-hello/autohello/files/autohello/NEWS b/examples/yocto/meta-mini/recipes-hello/autohello/files/autohello/NEWS new file mode 100644 index 0000000..e69de29 diff --git a/examples/yocto/meta-mini/recipes-hello/autohello/files/autohello/README b/examples/yocto/meta-mini/recipes-hello/autohello/files/autohello/README new file mode 100644 index 0000000..e69de29 diff --git a/examples/yocto/meta-mini/recipes-hello/autohello/files/autohello/aclocal.m4 b/examples/yocto/meta-mini/recipes-hello/autohello/files/autohello/aclocal.m4 new file mode 100644 index 0000000..f79440d --- /dev/null +++ b/examples/yocto/meta-mini/recipes-hello/autohello/files/autohello/aclocal.m4 @@ -0,0 +1,1150 @@ +# generated automatically by aclocal 1.14.1 -*- Autoconf -*- + +# Copyright (C) 1996-2013 Free Software Foundation, Inc. + +# This file is free software; the Free Software Foundation +# gives unlimited permission to copy and/or distribute it, +# with or without modifications, as long as this notice is preserved. + +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY, to the extent permitted by law; without +# even the implied warranty of MERCHANTABILITY or FITNESS FOR A +# PARTICULAR PURPOSE. + +m4_ifndef([AC_CONFIG_MACRO_DIRS], [m4_defun([_AM_CONFIG_MACRO_DIRS], [])m4_defun([AC_CONFIG_MACRO_DIRS], [_AM_CONFIG_MACRO_DIRS($@)])]) +m4_ifndef([AC_AUTOCONF_VERSION], + [m4_copy([m4_PACKAGE_VERSION], [AC_AUTOCONF_VERSION])])dnl +m4_if(m4_defn([AC_AUTOCONF_VERSION]), [2.69],, +[m4_warning([this file was generated for autoconf 2.69. +You have another version of autoconf. It may work, but is not guaranteed to. +If you have problems, you may need to regenerate the build system entirely. +To do so, use the procedure documented by the package, typically 'autoreconf'.])]) + +# Copyright (C) 2002-2013 Free Software Foundation, Inc. +# +# This file is free software; the Free Software Foundation +# gives unlimited permission to copy and/or distribute it, +# with or without modifications, as long as this notice is preserved. + +# AM_AUTOMAKE_VERSION(VERSION) +# ---------------------------- +# Automake X.Y traces this macro to ensure aclocal.m4 has been +# generated from the m4 files accompanying Automake X.Y. +# (This private macro should not be called outside this file.) +AC_DEFUN([AM_AUTOMAKE_VERSION], +[am__api_version='1.14' +dnl Some users find AM_AUTOMAKE_VERSION and mistake it for a way to +dnl require some minimum version. Point them to the right macro. +m4_if([$1], [1.14.1], [], + [AC_FATAL([Do not call $0, use AM_INIT_AUTOMAKE([$1]).])])dnl +]) + +# _AM_AUTOCONF_VERSION(VERSION) +# ----------------------------- +# aclocal traces this macro to find the Autoconf version. +# This is a private macro too. Using m4_define simplifies +# the logic in aclocal, which can simply ignore this definition. +m4_define([_AM_AUTOCONF_VERSION], []) + +# AM_SET_CURRENT_AUTOMAKE_VERSION +# ------------------------------- +# Call AM_AUTOMAKE_VERSION and AM_AUTOMAKE_VERSION so they can be traced. +# This function is AC_REQUIREd by AM_INIT_AUTOMAKE. +AC_DEFUN([AM_SET_CURRENT_AUTOMAKE_VERSION], +[AM_AUTOMAKE_VERSION([1.14.1])dnl +m4_ifndef([AC_AUTOCONF_VERSION], + [m4_copy([m4_PACKAGE_VERSION], [AC_AUTOCONF_VERSION])])dnl +_AM_AUTOCONF_VERSION(m4_defn([AC_AUTOCONF_VERSION]))]) + +# AM_AUX_DIR_EXPAND -*- Autoconf -*- + +# Copyright (C) 2001-2013 Free Software Foundation, Inc. +# +# This file is free software; the Free Software Foundation +# gives unlimited permission to copy and/or distribute it, +# with or without modifications, as long as this notice is preserved. + +# For projects using AC_CONFIG_AUX_DIR([foo]), Autoconf sets +# $ac_aux_dir to '$srcdir/foo'. In other projects, it is set to +# '$srcdir', '$srcdir/..', or '$srcdir/../..'. +# +# Of course, Automake must honor this variable whenever it calls a +# tool from the auxiliary directory. The problem is that $srcdir (and +# therefore $ac_aux_dir as well) can be either absolute or relative, +# depending on how configure is run. This is pretty annoying, since +# it makes $ac_aux_dir quite unusable in subdirectories: in the top +# source directory, any form will work fine, but in subdirectories a +# relative path needs to be adjusted first. +# +# $ac_aux_dir/missing +# fails when called from a subdirectory if $ac_aux_dir is relative +# $top_srcdir/$ac_aux_dir/missing +# fails if $ac_aux_dir is absolute, +# fails when called from a subdirectory in a VPATH build with +# a relative $ac_aux_dir +# +# The reason of the latter failure is that $top_srcdir and $ac_aux_dir +# are both prefixed by $srcdir. In an in-source build this is usually +# harmless because $srcdir is '.', but things will broke when you +# start a VPATH build or use an absolute $srcdir. +# +# So we could use something similar to $top_srcdir/$ac_aux_dir/missing, +# iff we strip the leading $srcdir from $ac_aux_dir. That would be: +# am_aux_dir='\$(top_srcdir)/'`expr "$ac_aux_dir" : "$srcdir//*\(.*\)"` +# and then we would define $MISSING as +# MISSING="\${SHELL} $am_aux_dir/missing" +# This will work as long as MISSING is not called from configure, because +# unfortunately $(top_srcdir) has no meaning in configure. +# However there are other variables, like CC, which are often used in +# configure, and could therefore not use this "fixed" $ac_aux_dir. +# +# Another solution, used here, is to always expand $ac_aux_dir to an +# absolute PATH. The drawback is that using absolute paths prevent a +# configured tree to be moved without reconfiguration. + +AC_DEFUN([AM_AUX_DIR_EXPAND], +[dnl Rely on autoconf to set up CDPATH properly. +AC_PREREQ([2.50])dnl +# expand $ac_aux_dir to an absolute path +am_aux_dir=`cd $ac_aux_dir && pwd` +]) + +# AM_CONDITIONAL -*- Autoconf -*- + +# Copyright (C) 1997-2013 Free Software Foundation, Inc. +# +# This file is free software; the Free Software Foundation +# gives unlimited permission to copy and/or distribute it, +# with or without modifications, as long as this notice is preserved. + +# AM_CONDITIONAL(NAME, SHELL-CONDITION) +# ------------------------------------- +# Define a conditional. +AC_DEFUN([AM_CONDITIONAL], +[AC_PREREQ([2.52])dnl + m4_if([$1], [TRUE], [AC_FATAL([$0: invalid condition: $1])], + [$1], [FALSE], [AC_FATAL([$0: invalid condition: $1])])dnl +AC_SUBST([$1_TRUE])dnl +AC_SUBST([$1_FALSE])dnl +_AM_SUBST_NOTMAKE([$1_TRUE])dnl +_AM_SUBST_NOTMAKE([$1_FALSE])dnl +m4_define([_AM_COND_VALUE_$1], [$2])dnl +if $2; then + $1_TRUE= + $1_FALSE='#' +else + $1_TRUE='#' + $1_FALSE= +fi +AC_CONFIG_COMMANDS_PRE( +[if test -z "${$1_TRUE}" && test -z "${$1_FALSE}"; then + AC_MSG_ERROR([[conditional "$1" was never defined. +Usually this means the macro was only invoked conditionally.]]) +fi])]) + +# Copyright (C) 1999-2013 Free Software Foundation, Inc. +# +# This file is free software; the Free Software Foundation +# gives unlimited permission to copy and/or distribute it, +# with or without modifications, as long as this notice is preserved. + + +# There are a few dirty hacks below to avoid letting 'AC_PROG_CC' be +# written in clear, in which case automake, when reading aclocal.m4, +# will think it sees a *use*, and therefore will trigger all it's +# C support machinery. Also note that it means that autoscan, seeing +# CC etc. in the Makefile, will ask for an AC_PROG_CC use... + + +# _AM_DEPENDENCIES(NAME) +# ---------------------- +# See how the compiler implements dependency checking. +# NAME is "CC", "CXX", "OBJC", "OBJCXX", "UPC", or "GJC". +# We try a few techniques and use that to set a single cache variable. +# +# We don't AC_REQUIRE the corresponding AC_PROG_CC since the latter was +# modified to invoke _AM_DEPENDENCIES(CC); we would have a circular +# dependency, and given that the user is not expected to run this macro, +# just rely on AC_PROG_CC. +AC_DEFUN([_AM_DEPENDENCIES], +[AC_REQUIRE([AM_SET_DEPDIR])dnl +AC_REQUIRE([AM_OUTPUT_DEPENDENCY_COMMANDS])dnl +AC_REQUIRE([AM_MAKE_INCLUDE])dnl +AC_REQUIRE([AM_DEP_TRACK])dnl + +m4_if([$1], [CC], [depcc="$CC" am_compiler_list=], + [$1], [CXX], [depcc="$CXX" am_compiler_list=], + [$1], [OBJC], [depcc="$OBJC" am_compiler_list='gcc3 gcc'], + [$1], [OBJCXX], [depcc="$OBJCXX" am_compiler_list='gcc3 gcc'], + [$1], [UPC], [depcc="$UPC" am_compiler_list=], + [$1], [GCJ], [depcc="$GCJ" am_compiler_list='gcc3 gcc'], + [depcc="$$1" am_compiler_list=]) + +AC_CACHE_CHECK([dependency style of $depcc], + [am_cv_$1_dependencies_compiler_type], +[if test -z "$AMDEP_TRUE" && test -f "$am_depcomp"; then + # We make a subdir and do the tests there. Otherwise we can end up + # making bogus files that we don't know about and never remove. For + # instance it was reported that on HP-UX the gcc test will end up + # making a dummy file named 'D' -- because '-MD' means "put the output + # in D". + rm -rf conftest.dir + mkdir conftest.dir + # Copy depcomp to subdir because otherwise we won't find it if we're + # using a relative directory. + cp "$am_depcomp" conftest.dir + cd conftest.dir + # We will build objects and dependencies in a subdirectory because + # it helps to detect inapplicable dependency modes. For instance + # both Tru64's cc and ICC support -MD to output dependencies as a + # side effect of compilation, but ICC will put the dependencies in + # the current directory while Tru64 will put them in the object + # directory. + mkdir sub + + am_cv_$1_dependencies_compiler_type=none + if test "$am_compiler_list" = ""; then + am_compiler_list=`sed -n ['s/^#*\([a-zA-Z0-9]*\))$/\1/p'] < ./depcomp` + fi + am__universal=false + m4_case([$1], [CC], + [case " $depcc " in #( + *\ -arch\ *\ -arch\ *) am__universal=true ;; + esac], + [CXX], + [case " $depcc " in #( + *\ -arch\ *\ -arch\ *) am__universal=true ;; + esac]) + + for depmode in $am_compiler_list; do + # Setup a source with many dependencies, because some compilers + # like to wrap large dependency lists on column 80 (with \), and + # we should not choose a depcomp mode which is confused by this. + # + # We need to recreate these files for each test, as the compiler may + # overwrite some of them when testing with obscure command lines. + # This happens at least with the AIX C compiler. + : > sub/conftest.c + for i in 1 2 3 4 5 6; do + echo '#include "conftst'$i'.h"' >> sub/conftest.c + # Using ": > sub/conftst$i.h" creates only sub/conftst1.h with + # Solaris 10 /bin/sh. + echo '/* dummy */' > sub/conftst$i.h + done + echo "${am__include} ${am__quote}sub/conftest.Po${am__quote}" > confmf + + # We check with '-c' and '-o' for the sake of the "dashmstdout" + # mode. It turns out that the SunPro C++ compiler does not properly + # handle '-M -o', and we need to detect this. Also, some Intel + # versions had trouble with output in subdirs. + am__obj=sub/conftest.${OBJEXT-o} + am__minus_obj="-o $am__obj" + case $depmode in + gcc) + # This depmode causes a compiler race in universal mode. + test "$am__universal" = false || continue + ;; + nosideeffect) + # After this tag, mechanisms are not by side-effect, so they'll + # only be used when explicitly requested. + if test "x$enable_dependency_tracking" = xyes; then + continue + else + break + fi + ;; + msvc7 | msvc7msys | msvisualcpp | msvcmsys) + # This compiler won't grok '-c -o', but also, the minuso test has + # not run yet. These depmodes are late enough in the game, and + # so weak that their functioning should not be impacted. + am__obj=conftest.${OBJEXT-o} + am__minus_obj= + ;; + none) break ;; + esac + if depmode=$depmode \ + source=sub/conftest.c object=$am__obj \ + depfile=sub/conftest.Po tmpdepfile=sub/conftest.TPo \ + $SHELL ./depcomp $depcc -c $am__minus_obj sub/conftest.c \ + >/dev/null 2>conftest.err && + grep sub/conftst1.h sub/conftest.Po > /dev/null 2>&1 && + grep sub/conftst6.h sub/conftest.Po > /dev/null 2>&1 && + grep $am__obj sub/conftest.Po > /dev/null 2>&1 && + ${MAKE-make} -s -f confmf > /dev/null 2>&1; then + # icc doesn't choke on unknown options, it will just issue warnings + # or remarks (even with -Werror). So we grep stderr for any message + # that says an option was ignored or not supported. + # When given -MP, icc 7.0 and 7.1 complain thusly: + # icc: Command line warning: ignoring option '-M'; no argument required + # The diagnosis changed in icc 8.0: + # icc: Command line remark: option '-MP' not supported + if (grep 'ignoring option' conftest.err || + grep 'not supported' conftest.err) >/dev/null 2>&1; then :; else + am_cv_$1_dependencies_compiler_type=$depmode + break + fi + fi + done + + cd .. + rm -rf conftest.dir +else + am_cv_$1_dependencies_compiler_type=none +fi +]) +AC_SUBST([$1DEPMODE], [depmode=$am_cv_$1_dependencies_compiler_type]) +AM_CONDITIONAL([am__fastdep$1], [ + test "x$enable_dependency_tracking" != xno \ + && test "$am_cv_$1_dependencies_compiler_type" = gcc3]) +]) + + +# AM_SET_DEPDIR +# ------------- +# Choose a directory name for dependency files. +# This macro is AC_REQUIREd in _AM_DEPENDENCIES. +AC_DEFUN([AM_SET_DEPDIR], +[AC_REQUIRE([AM_SET_LEADING_DOT])dnl +AC_SUBST([DEPDIR], ["${am__leading_dot}deps"])dnl +]) + + +# AM_DEP_TRACK +# ------------ +AC_DEFUN([AM_DEP_TRACK], +[AC_ARG_ENABLE([dependency-tracking], [dnl +AS_HELP_STRING( + [--enable-dependency-tracking], + [do not reject slow dependency extractors]) +AS_HELP_STRING( + [--disable-dependency-tracking], + [speeds up one-time build])]) +if test "x$enable_dependency_tracking" != xno; then + am_depcomp="$ac_aux_dir/depcomp" + AMDEPBACKSLASH='\' + am__nodep='_no' +fi +AM_CONDITIONAL([AMDEP], [test "x$enable_dependency_tracking" != xno]) +AC_SUBST([AMDEPBACKSLASH])dnl +_AM_SUBST_NOTMAKE([AMDEPBACKSLASH])dnl +AC_SUBST([am__nodep])dnl +_AM_SUBST_NOTMAKE([am__nodep])dnl +]) + +# Generate code to set up dependency tracking. -*- Autoconf -*- + +# Copyright (C) 1999-2013 Free Software Foundation, Inc. +# +# This file is free software; the Free Software Foundation +# gives unlimited permission to copy and/or distribute it, +# with or without modifications, as long as this notice is preserved. + + +# _AM_OUTPUT_DEPENDENCY_COMMANDS +# ------------------------------ +AC_DEFUN([_AM_OUTPUT_DEPENDENCY_COMMANDS], +[{ + # Older Autoconf quotes --file arguments for eval, but not when files + # are listed without --file. Let's play safe and only enable the eval + # if we detect the quoting. + case $CONFIG_FILES in + *\'*) eval set x "$CONFIG_FILES" ;; + *) set x $CONFIG_FILES ;; + esac + shift + for mf + do + # Strip MF so we end up with the name of the file. + mf=`echo "$mf" | sed -e 's/:.*$//'` + # Check whether this is an Automake generated Makefile or not. + # We used to match only the files named 'Makefile.in', but + # some people rename them; so instead we look at the file content. + # Grep'ing the first line is not enough: some people post-process + # each Makefile.in and add a new line on top of each file to say so. + # Grep'ing the whole file is not good either: AIX grep has a line + # limit of 2048, but all sed's we know have understand at least 4000. + if sed -n 's,^#.*generated by automake.*,X,p' "$mf" | grep X >/dev/null 2>&1; then + dirpart=`AS_DIRNAME("$mf")` + else + continue + fi + # Extract the definition of DEPDIR, am__include, and am__quote + # from the Makefile without running 'make'. + DEPDIR=`sed -n 's/^DEPDIR = //p' < "$mf"` + test -z "$DEPDIR" && continue + am__include=`sed -n 's/^am__include = //p' < "$mf"` + test -z "$am__include" && continue + am__quote=`sed -n 's/^am__quote = //p' < "$mf"` + # Find all dependency output files, they are included files with + # $(DEPDIR) in their names. We invoke sed twice because it is the + # simplest approach to changing $(DEPDIR) to its actual value in the + # expansion. + for file in `sed -n " + s/^$am__include $am__quote\(.*(DEPDIR).*\)$am__quote"'$/\1/p' <"$mf" | \ + sed -e 's/\$(DEPDIR)/'"$DEPDIR"'/g'`; do + # Make sure the directory exists. + test -f "$dirpart/$file" && continue + fdir=`AS_DIRNAME(["$file"])` + AS_MKDIR_P([$dirpart/$fdir]) + # echo "creating $dirpart/$file" + echo '# dummy' > "$dirpart/$file" + done + done +} +])# _AM_OUTPUT_DEPENDENCY_COMMANDS + + +# AM_OUTPUT_DEPENDENCY_COMMANDS +# ----------------------------- +# This macro should only be invoked once -- use via AC_REQUIRE. +# +# This code is only required when automatic dependency tracking +# is enabled. FIXME. This creates each '.P' file that we will +# need in order to bootstrap the dependency handling code. +AC_DEFUN([AM_OUTPUT_DEPENDENCY_COMMANDS], +[AC_CONFIG_COMMANDS([depfiles], + [test x"$AMDEP_TRUE" != x"" || _AM_OUTPUT_DEPENDENCY_COMMANDS], + [AMDEP_TRUE="$AMDEP_TRUE" ac_aux_dir="$ac_aux_dir"]) +]) + +# Do all the work for Automake. -*- Autoconf -*- + +# Copyright (C) 1996-2013 Free Software Foundation, Inc. +# +# This file is free software; the Free Software Foundation +# gives unlimited permission to copy and/or distribute it, +# with or without modifications, as long as this notice is preserved. + +# This macro actually does too much. Some checks are only needed if +# your package does certain things. But this isn't really a big deal. + +dnl Redefine AC_PROG_CC to automatically invoke _AM_PROG_CC_C_O. +m4_define([AC_PROG_CC], +m4_defn([AC_PROG_CC]) +[_AM_PROG_CC_C_O +]) + +# AM_INIT_AUTOMAKE(PACKAGE, VERSION, [NO-DEFINE]) +# AM_INIT_AUTOMAKE([OPTIONS]) +# ----------------------------------------------- +# The call with PACKAGE and VERSION arguments is the old style +# call (pre autoconf-2.50), which is being phased out. PACKAGE +# and VERSION should now be passed to AC_INIT and removed from +# the call to AM_INIT_AUTOMAKE. +# We support both call styles for the transition. After +# the next Automake release, Autoconf can make the AC_INIT +# arguments mandatory, and then we can depend on a new Autoconf +# release and drop the old call support. +AC_DEFUN([AM_INIT_AUTOMAKE], +[AC_PREREQ([2.65])dnl +dnl Autoconf wants to disallow AM_ names. We explicitly allow +dnl the ones we care about. +m4_pattern_allow([^AM_[A-Z]+FLAGS$])dnl +AC_REQUIRE([AM_SET_CURRENT_AUTOMAKE_VERSION])dnl +AC_REQUIRE([AC_PROG_INSTALL])dnl +if test "`cd $srcdir && pwd`" != "`pwd`"; then + # Use -I$(srcdir) only when $(srcdir) != ., so that make's output + # is not polluted with repeated "-I." + AC_SUBST([am__isrc], [' -I$(srcdir)'])_AM_SUBST_NOTMAKE([am__isrc])dnl + # test to see if srcdir already configured + if test -f $srcdir/config.status; then + AC_MSG_ERROR([source directory already configured; run "make distclean" there first]) + fi +fi + +# test whether we have cygpath +if test -z "$CYGPATH_W"; then + if (cygpath --version) >/dev/null 2>/dev/null; then + CYGPATH_W='cygpath -w' + else + CYGPATH_W=echo + fi +fi +AC_SUBST([CYGPATH_W]) + +# Define the identity of the package. +dnl Distinguish between old-style and new-style calls. +m4_ifval([$2], +[AC_DIAGNOSE([obsolete], + [$0: two- and three-arguments forms are deprecated.]) +m4_ifval([$3], [_AM_SET_OPTION([no-define])])dnl + AC_SUBST([PACKAGE], [$1])dnl + AC_SUBST([VERSION], [$2])], +[_AM_SET_OPTIONS([$1])dnl +dnl Diagnose old-style AC_INIT with new-style AM_AUTOMAKE_INIT. +m4_if( + m4_ifdef([AC_PACKAGE_NAME], [ok]):m4_ifdef([AC_PACKAGE_VERSION], [ok]), + [ok:ok],, + [m4_fatal([AC_INIT should be called with package and version arguments])])dnl + AC_SUBST([PACKAGE], ['AC_PACKAGE_TARNAME'])dnl + AC_SUBST([VERSION], ['AC_PACKAGE_VERSION'])])dnl + +_AM_IF_OPTION([no-define],, +[AC_DEFINE_UNQUOTED([PACKAGE], ["$PACKAGE"], [Name of package]) + AC_DEFINE_UNQUOTED([VERSION], ["$VERSION"], [Version number of package])])dnl + +# Some tools Automake needs. +AC_REQUIRE([AM_SANITY_CHECK])dnl +AC_REQUIRE([AC_ARG_PROGRAM])dnl +AM_MISSING_PROG([ACLOCAL], [aclocal-${am__api_version}]) +AM_MISSING_PROG([AUTOCONF], [autoconf]) +AM_MISSING_PROG([AUTOMAKE], [automake-${am__api_version}]) +AM_MISSING_PROG([AUTOHEADER], [autoheader]) +AM_MISSING_PROG([MAKEINFO], [makeinfo]) +AC_REQUIRE([AM_PROG_INSTALL_SH])dnl +AC_REQUIRE([AM_PROG_INSTALL_STRIP])dnl +AC_REQUIRE([AC_PROG_MKDIR_P])dnl +# For better backward compatibility. To be removed once Automake 1.9.x +# dies out for good. For more background, see: +# +# +AC_SUBST([mkdir_p], ['$(MKDIR_P)']) +# We need awk for the "check" target. The system "awk" is bad on +# some platforms. +AC_REQUIRE([AC_PROG_AWK])dnl +AC_REQUIRE([AC_PROG_MAKE_SET])dnl +AC_REQUIRE([AM_SET_LEADING_DOT])dnl +_AM_IF_OPTION([tar-ustar], [_AM_PROG_TAR([ustar])], + [_AM_IF_OPTION([tar-pax], [_AM_PROG_TAR([pax])], + [_AM_PROG_TAR([v7])])]) +_AM_IF_OPTION([no-dependencies],, +[AC_PROVIDE_IFELSE([AC_PROG_CC], + [_AM_DEPENDENCIES([CC])], + [m4_define([AC_PROG_CC], + m4_defn([AC_PROG_CC])[_AM_DEPENDENCIES([CC])])])dnl +AC_PROVIDE_IFELSE([AC_PROG_CXX], + [_AM_DEPENDENCIES([CXX])], + [m4_define([AC_PROG_CXX], + m4_defn([AC_PROG_CXX])[_AM_DEPENDENCIES([CXX])])])dnl +AC_PROVIDE_IFELSE([AC_PROG_OBJC], + [_AM_DEPENDENCIES([OBJC])], + [m4_define([AC_PROG_OBJC], + m4_defn([AC_PROG_OBJC])[_AM_DEPENDENCIES([OBJC])])])dnl +AC_PROVIDE_IFELSE([AC_PROG_OBJCXX], + [_AM_DEPENDENCIES([OBJCXX])], + [m4_define([AC_PROG_OBJCXX], + m4_defn([AC_PROG_OBJCXX])[_AM_DEPENDENCIES([OBJCXX])])])dnl +]) +AC_REQUIRE([AM_SILENT_RULES])dnl +dnl The testsuite driver may need to know about EXEEXT, so add the +dnl 'am__EXEEXT' conditional if _AM_COMPILER_EXEEXT was seen. This +dnl macro is hooked onto _AC_COMPILER_EXEEXT early, see below. +AC_CONFIG_COMMANDS_PRE(dnl +[m4_provide_if([_AM_COMPILER_EXEEXT], + [AM_CONDITIONAL([am__EXEEXT], [test -n "$EXEEXT"])])])dnl + +# POSIX will say in a future version that running "rm -f" with no argument +# is OK; and we want to be able to make that assumption in our Makefile +# recipes. So use an aggressive probe to check that the usage we want is +# actually supported "in the wild" to an acceptable degree. +# See automake bug#10828. +# To make any issue more visible, cause the running configure to be aborted +# by default if the 'rm' program in use doesn't match our expectations; the +# user can still override this though. +if rm -f && rm -fr && rm -rf; then : OK; else + cat >&2 <<'END' +Oops! + +Your 'rm' program seems unable to run without file operands specified +on the command line, even when the '-f' option is present. This is contrary +to the behaviour of most rm programs out there, and not conforming with +the upcoming POSIX standard: + +Please tell bug-automake@gnu.org about your system, including the value +of your $PATH and any error possibly output before this message. This +can help us improve future automake versions. + +END + if test x"$ACCEPT_INFERIOR_RM_PROGRAM" = x"yes"; then + echo 'Configuration will proceed anyway, since you have set the' >&2 + echo 'ACCEPT_INFERIOR_RM_PROGRAM variable to "yes"' >&2 + echo >&2 + else + cat >&2 <<'END' +Aborting the configuration process, to ensure you take notice of the issue. + +You can download and install GNU coreutils to get an 'rm' implementation +that behaves properly: . + +If you want to complete the configuration process using your problematic +'rm' anyway, export the environment variable ACCEPT_INFERIOR_RM_PROGRAM +to "yes", and re-run configure. + +END + AC_MSG_ERROR([Your 'rm' program is bad, sorry.]) + fi +fi +]) + +dnl Hook into '_AC_COMPILER_EXEEXT' early to learn its expansion. Do not +dnl add the conditional right here, as _AC_COMPILER_EXEEXT may be further +dnl mangled by Autoconf and run in a shell conditional statement. +m4_define([_AC_COMPILER_EXEEXT], +m4_defn([_AC_COMPILER_EXEEXT])[m4_provide([_AM_COMPILER_EXEEXT])]) + +# When config.status generates a header, we must update the stamp-h file. +# This file resides in the same directory as the config header +# that is generated. The stamp files are numbered to have different names. + +# Autoconf calls _AC_AM_CONFIG_HEADER_HOOK (when defined) in the +# loop where config.status creates the headers, so we can generate +# our stamp files there. +AC_DEFUN([_AC_AM_CONFIG_HEADER_HOOK], +[# Compute $1's index in $config_headers. +_am_arg=$1 +_am_stamp_count=1 +for _am_header in $config_headers :; do + case $_am_header in + $_am_arg | $_am_arg:* ) + break ;; + * ) + _am_stamp_count=`expr $_am_stamp_count + 1` ;; + esac +done +echo "timestamp for $_am_arg" >`AS_DIRNAME(["$_am_arg"])`/stamp-h[]$_am_stamp_count]) + +# Copyright (C) 2001-2013 Free Software Foundation, Inc. +# +# This file is free software; the Free Software Foundation +# gives unlimited permission to copy and/or distribute it, +# with or without modifications, as long as this notice is preserved. + +# AM_PROG_INSTALL_SH +# ------------------ +# Define $install_sh. +AC_DEFUN([AM_PROG_INSTALL_SH], +[AC_REQUIRE([AM_AUX_DIR_EXPAND])dnl +if test x"${install_sh}" != xset; then + case $am_aux_dir in + *\ * | *\ *) + install_sh="\${SHELL} '$am_aux_dir/install-sh'" ;; + *) + install_sh="\${SHELL} $am_aux_dir/install-sh" + esac +fi +AC_SUBST([install_sh])]) + +# Copyright (C) 2003-2013 Free Software Foundation, Inc. +# +# This file is free software; the Free Software Foundation +# gives unlimited permission to copy and/or distribute it, +# with or without modifications, as long as this notice is preserved. + +# Check whether the underlying file-system supports filenames +# with a leading dot. For instance MS-DOS doesn't. +AC_DEFUN([AM_SET_LEADING_DOT], +[rm -rf .tst 2>/dev/null +mkdir .tst 2>/dev/null +if test -d .tst; then + am__leading_dot=. +else + am__leading_dot=_ +fi +rmdir .tst 2>/dev/null +AC_SUBST([am__leading_dot])]) + +# Check to see how 'make' treats includes. -*- Autoconf -*- + +# Copyright (C) 2001-2013 Free Software Foundation, Inc. +# +# This file is free software; the Free Software Foundation +# gives unlimited permission to copy and/or distribute it, +# with or without modifications, as long as this notice is preserved. + +# AM_MAKE_INCLUDE() +# ----------------- +# Check to see how make treats includes. +AC_DEFUN([AM_MAKE_INCLUDE], +[am_make=${MAKE-make} +cat > confinc << 'END' +am__doit: + @echo this is the am__doit target +.PHONY: am__doit +END +# If we don't find an include directive, just comment out the code. +AC_MSG_CHECKING([for style of include used by $am_make]) +am__include="#" +am__quote= +_am_result=none +# First try GNU make style include. +echo "include confinc" > confmf +# Ignore all kinds of additional output from 'make'. +case `$am_make -s -f confmf 2> /dev/null` in #( +*the\ am__doit\ target*) + am__include=include + am__quote= + _am_result=GNU + ;; +esac +# Now try BSD make style include. +if test "$am__include" = "#"; then + echo '.include "confinc"' > confmf + case `$am_make -s -f confmf 2> /dev/null` in #( + *the\ am__doit\ target*) + am__include=.include + am__quote="\"" + _am_result=BSD + ;; + esac +fi +AC_SUBST([am__include]) +AC_SUBST([am__quote]) +AC_MSG_RESULT([$_am_result]) +rm -f confinc confmf +]) + +# Fake the existence of programs that GNU maintainers use. -*- Autoconf -*- + +# Copyright (C) 1997-2013 Free Software Foundation, Inc. +# +# This file is free software; the Free Software Foundation +# gives unlimited permission to copy and/or distribute it, +# with or without modifications, as long as this notice is preserved. + +# AM_MISSING_PROG(NAME, PROGRAM) +# ------------------------------ +AC_DEFUN([AM_MISSING_PROG], +[AC_REQUIRE([AM_MISSING_HAS_RUN]) +$1=${$1-"${am_missing_run}$2"} +AC_SUBST($1)]) + +# AM_MISSING_HAS_RUN +# ------------------ +# Define MISSING if not defined so far and test if it is modern enough. +# If it is, set am_missing_run to use it, otherwise, to nothing. +AC_DEFUN([AM_MISSING_HAS_RUN], +[AC_REQUIRE([AM_AUX_DIR_EXPAND])dnl +AC_REQUIRE_AUX_FILE([missing])dnl +if test x"${MISSING+set}" != xset; then + case $am_aux_dir in + *\ * | *\ *) + MISSING="\${SHELL} \"$am_aux_dir/missing\"" ;; + *) + MISSING="\${SHELL} $am_aux_dir/missing" ;; + esac +fi +# Use eval to expand $SHELL +if eval "$MISSING --is-lightweight"; then + am_missing_run="$MISSING " +else + am_missing_run= + AC_MSG_WARN(['missing' script is too old or missing]) +fi +]) + +# Helper functions for option handling. -*- Autoconf -*- + +# Copyright (C) 2001-2013 Free Software Foundation, Inc. +# +# This file is free software; the Free Software Foundation +# gives unlimited permission to copy and/or distribute it, +# with or without modifications, as long as this notice is preserved. + +# _AM_MANGLE_OPTION(NAME) +# ----------------------- +AC_DEFUN([_AM_MANGLE_OPTION], +[[_AM_OPTION_]m4_bpatsubst($1, [[^a-zA-Z0-9_]], [_])]) + +# _AM_SET_OPTION(NAME) +# -------------------- +# Set option NAME. Presently that only means defining a flag for this option. +AC_DEFUN([_AM_SET_OPTION], +[m4_define(_AM_MANGLE_OPTION([$1]), [1])]) + +# _AM_SET_OPTIONS(OPTIONS) +# ------------------------ +# OPTIONS is a space-separated list of Automake options. +AC_DEFUN([_AM_SET_OPTIONS], +[m4_foreach_w([_AM_Option], [$1], [_AM_SET_OPTION(_AM_Option)])]) + +# _AM_IF_OPTION(OPTION, IF-SET, [IF-NOT-SET]) +# ------------------------------------------- +# Execute IF-SET if OPTION is set, IF-NOT-SET otherwise. +AC_DEFUN([_AM_IF_OPTION], +[m4_ifset(_AM_MANGLE_OPTION([$1]), [$2], [$3])]) + +# Copyright (C) 1999-2013 Free Software Foundation, Inc. +# +# This file is free software; the Free Software Foundation +# gives unlimited permission to copy and/or distribute it, +# with or without modifications, as long as this notice is preserved. + +# _AM_PROG_CC_C_O +# --------------- +# Like AC_PROG_CC_C_O, but changed for automake. We rewrite AC_PROG_CC +# to automatically call this. +AC_DEFUN([_AM_PROG_CC_C_O], +[AC_REQUIRE([AM_AUX_DIR_EXPAND])dnl +AC_REQUIRE_AUX_FILE([compile])dnl +AC_LANG_PUSH([C])dnl +AC_CACHE_CHECK( + [whether $CC understands -c and -o together], + [am_cv_prog_cc_c_o], + [AC_LANG_CONFTEST([AC_LANG_PROGRAM([])]) + # Make sure it works both with $CC and with simple cc. + # Following AC_PROG_CC_C_O, we do the test twice because some + # compilers refuse to overwrite an existing .o file with -o, + # though they will create one. + am_cv_prog_cc_c_o=yes + for am_i in 1 2; do + if AM_RUN_LOG([$CC -c conftest.$ac_ext -o conftest2.$ac_objext]) \ + && test -f conftest2.$ac_objext; then + : OK + else + am_cv_prog_cc_c_o=no + break + fi + done + rm -f core conftest* + unset am_i]) +if test "$am_cv_prog_cc_c_o" != yes; then + # Losing compiler, so override with the script. + # FIXME: It is wrong to rewrite CC. + # But if we don't then we get into trouble of one sort or another. + # A longer-term fix would be to have automake use am__CC in this case, + # and then we could set am__CC="\$(top_srcdir)/compile \$(CC)" + CC="$am_aux_dir/compile $CC" +fi +AC_LANG_POP([C])]) + +# For backward compatibility. +AC_DEFUN_ONCE([AM_PROG_CC_C_O], [AC_REQUIRE([AC_PROG_CC])]) + +# Copyright (C) 2001-2013 Free Software Foundation, Inc. +# +# This file is free software; the Free Software Foundation +# gives unlimited permission to copy and/or distribute it, +# with or without modifications, as long as this notice is preserved. + +# AM_RUN_LOG(COMMAND) +# ------------------- +# Run COMMAND, save the exit status in ac_status, and log it. +# (This has been adapted from Autoconf's _AC_RUN_LOG macro.) +AC_DEFUN([AM_RUN_LOG], +[{ echo "$as_me:$LINENO: $1" >&AS_MESSAGE_LOG_FD + ($1) >&AS_MESSAGE_LOG_FD 2>&AS_MESSAGE_LOG_FD + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&AS_MESSAGE_LOG_FD + (exit $ac_status); }]) + +# Check to make sure that the build environment is sane. -*- Autoconf -*- + +# Copyright (C) 1996-2013 Free Software Foundation, Inc. +# +# This file is free software; the Free Software Foundation +# gives unlimited permission to copy and/or distribute it, +# with or without modifications, as long as this notice is preserved. + +# AM_SANITY_CHECK +# --------------- +AC_DEFUN([AM_SANITY_CHECK], +[AC_MSG_CHECKING([whether build environment is sane]) +# Reject unsafe characters in $srcdir or the absolute working directory +# name. Accept space and tab only in the latter. +am_lf=' +' +case `pwd` in + *[[\\\"\#\$\&\'\`$am_lf]]*) + AC_MSG_ERROR([unsafe absolute working directory name]);; +esac +case $srcdir in + *[[\\\"\#\$\&\'\`$am_lf\ \ ]]*) + AC_MSG_ERROR([unsafe srcdir value: '$srcdir']);; +esac + +# Do 'set' in a subshell so we don't clobber the current shell's +# arguments. Must try -L first in case configure is actually a +# symlink; some systems play weird games with the mod time of symlinks +# (eg FreeBSD returns the mod time of the symlink's containing +# directory). +if ( + am_has_slept=no + for am_try in 1 2; do + echo "timestamp, slept: $am_has_slept" > conftest.file + set X `ls -Lt "$srcdir/configure" conftest.file 2> /dev/null` + if test "$[*]" = "X"; then + # -L didn't work. + set X `ls -t "$srcdir/configure" conftest.file` + fi + if test "$[*]" != "X $srcdir/configure conftest.file" \ + && test "$[*]" != "X conftest.file $srcdir/configure"; then + + # If neither matched, then we have a broken ls. This can happen + # if, for instance, CONFIG_SHELL is bash and it inherits a + # broken ls alias from the environment. This has actually + # happened. Such a system could not be considered "sane". + AC_MSG_ERROR([ls -t appears to fail. Make sure there is not a broken + alias in your environment]) + fi + if test "$[2]" = conftest.file || test $am_try -eq 2; then + break + fi + # Just in case. + sleep 1 + am_has_slept=yes + done + test "$[2]" = conftest.file + ) +then + # Ok. + : +else + AC_MSG_ERROR([newly created file is older than distributed files! +Check your system clock]) +fi +AC_MSG_RESULT([yes]) +# If we didn't sleep, we still need to ensure time stamps of config.status and +# generated files are strictly newer. +am_sleep_pid= +if grep 'slept: no' conftest.file >/dev/null 2>&1; then + ( sleep 1 ) & + am_sleep_pid=$! +fi +AC_CONFIG_COMMANDS_PRE( + [AC_MSG_CHECKING([that generated files are newer than configure]) + if test -n "$am_sleep_pid"; then + # Hide warnings about reused PIDs. + wait $am_sleep_pid 2>/dev/null + fi + AC_MSG_RESULT([done])]) +rm -f conftest.file +]) + +# Copyright (C) 2009-2013 Free Software Foundation, Inc. +# +# This file is free software; the Free Software Foundation +# gives unlimited permission to copy and/or distribute it, +# with or without modifications, as long as this notice is preserved. + +# AM_SILENT_RULES([DEFAULT]) +# -------------------------- +# Enable less verbose build rules; with the default set to DEFAULT +# ("yes" being less verbose, "no" or empty being verbose). +AC_DEFUN([AM_SILENT_RULES], +[AC_ARG_ENABLE([silent-rules], [dnl +AS_HELP_STRING( + [--enable-silent-rules], + [less verbose build output (undo: "make V=1")]) +AS_HELP_STRING( + [--disable-silent-rules], + [verbose build output (undo: "make V=0")])dnl +]) +case $enable_silent_rules in @%:@ ((( + yes) AM_DEFAULT_VERBOSITY=0;; + no) AM_DEFAULT_VERBOSITY=1;; + *) AM_DEFAULT_VERBOSITY=m4_if([$1], [yes], [0], [1]);; +esac +dnl +dnl A few 'make' implementations (e.g., NonStop OS and NextStep) +dnl do not support nested variable expansions. +dnl See automake bug#9928 and bug#10237. +am_make=${MAKE-make} +AC_CACHE_CHECK([whether $am_make supports nested variables], + [am_cv_make_support_nested_variables], + [if AS_ECHO([['TRUE=$(BAR$(V)) +BAR0=false +BAR1=true +V=1 +am__doit: + @$(TRUE) +.PHONY: am__doit']]) | $am_make -f - >/dev/null 2>&1; then + am_cv_make_support_nested_variables=yes +else + am_cv_make_support_nested_variables=no +fi]) +if test $am_cv_make_support_nested_variables = yes; then + dnl Using '$V' instead of '$(V)' breaks IRIX make. + AM_V='$(V)' + AM_DEFAULT_V='$(AM_DEFAULT_VERBOSITY)' +else + AM_V=$AM_DEFAULT_VERBOSITY + AM_DEFAULT_V=$AM_DEFAULT_VERBOSITY +fi +AC_SUBST([AM_V])dnl +AM_SUBST_NOTMAKE([AM_V])dnl +AC_SUBST([AM_DEFAULT_V])dnl +AM_SUBST_NOTMAKE([AM_DEFAULT_V])dnl +AC_SUBST([AM_DEFAULT_VERBOSITY])dnl +AM_BACKSLASH='\' +AC_SUBST([AM_BACKSLASH])dnl +_AM_SUBST_NOTMAKE([AM_BACKSLASH])dnl +]) + +# Copyright (C) 2001-2013 Free Software Foundation, Inc. +# +# This file is free software; the Free Software Foundation +# gives unlimited permission to copy and/or distribute it, +# with or without modifications, as long as this notice is preserved. + +# AM_PROG_INSTALL_STRIP +# --------------------- +# One issue with vendor 'install' (even GNU) is that you can't +# specify the program used to strip binaries. This is especially +# annoying in cross-compiling environments, where the build's strip +# is unlikely to handle the host's binaries. +# Fortunately install-sh will honor a STRIPPROG variable, so we +# always use install-sh in "make install-strip", and initialize +# STRIPPROG with the value of the STRIP variable (set by the user). +AC_DEFUN([AM_PROG_INSTALL_STRIP], +[AC_REQUIRE([AM_PROG_INSTALL_SH])dnl +# Installed binaries are usually stripped using 'strip' when the user +# run "make install-strip". However 'strip' might not be the right +# tool to use in cross-compilation environments, therefore Automake +# will honor the 'STRIP' environment variable to overrule this program. +dnl Don't test for $cross_compiling = yes, because it might be 'maybe'. +if test "$cross_compiling" != no; then + AC_CHECK_TOOL([STRIP], [strip], :) +fi +INSTALL_STRIP_PROGRAM="\$(install_sh) -c -s" +AC_SUBST([INSTALL_STRIP_PROGRAM])]) + +# Copyright (C) 2006-2013 Free Software Foundation, Inc. +# +# This file is free software; the Free Software Foundation +# gives unlimited permission to copy and/or distribute it, +# with or without modifications, as long as this notice is preserved. + +# _AM_SUBST_NOTMAKE(VARIABLE) +# --------------------------- +# Prevent Automake from outputting VARIABLE = @VARIABLE@ in Makefile.in. +# This macro is traced by Automake. +AC_DEFUN([_AM_SUBST_NOTMAKE]) + +# AM_SUBST_NOTMAKE(VARIABLE) +# -------------------------- +# Public sister of _AM_SUBST_NOTMAKE. +AC_DEFUN([AM_SUBST_NOTMAKE], [_AM_SUBST_NOTMAKE($@)]) + +# Check how to create a tarball. -*- Autoconf -*- + +# Copyright (C) 2004-2013 Free Software Foundation, Inc. +# +# This file is free software; the Free Software Foundation +# gives unlimited permission to copy and/or distribute it, +# with or without modifications, as long as this notice is preserved. + +# _AM_PROG_TAR(FORMAT) +# -------------------- +# Check how to create a tarball in format FORMAT. +# FORMAT should be one of 'v7', 'ustar', or 'pax'. +# +# Substitute a variable $(am__tar) that is a command +# writing to stdout a FORMAT-tarball containing the directory +# $tardir. +# tardir=directory && $(am__tar) > result.tar +# +# Substitute a variable $(am__untar) that extract such +# a tarball read from stdin. +# $(am__untar) < result.tar +# +AC_DEFUN([_AM_PROG_TAR], +[# Always define AMTAR for backward compatibility. Yes, it's still used +# in the wild :-( We should find a proper way to deprecate it ... +AC_SUBST([AMTAR], ['$${TAR-tar}']) + +# We'll loop over all known methods to create a tar archive until one works. +_am_tools='gnutar m4_if([$1], [ustar], [plaintar]) pax cpio none' + +m4_if([$1], [v7], + [am__tar='$${TAR-tar} chof - "$$tardir"' am__untar='$${TAR-tar} xf -'], + + [m4_case([$1], + [ustar], + [# The POSIX 1988 'ustar' format is defined with fixed-size fields. + # There is notably a 21 bits limit for the UID and the GID. In fact, + # the 'pax' utility can hang on bigger UID/GID (see automake bug#8343 + # and bug#13588). + am_max_uid=2097151 # 2^21 - 1 + am_max_gid=$am_max_uid + # The $UID and $GID variables are not portable, so we need to resort + # to the POSIX-mandated id(1) utility. Errors in the 'id' calls + # below are definitely unexpected, so allow the users to see them + # (that is, avoid stderr redirection). + am_uid=`id -u || echo unknown` + am_gid=`id -g || echo unknown` + AC_MSG_CHECKING([whether UID '$am_uid' is supported by ustar format]) + if test $am_uid -le $am_max_uid; then + AC_MSG_RESULT([yes]) + else + AC_MSG_RESULT([no]) + _am_tools=none + fi + AC_MSG_CHECKING([whether GID '$am_gid' is supported by ustar format]) + if test $am_gid -le $am_max_gid; then + AC_MSG_RESULT([yes]) + else + AC_MSG_RESULT([no]) + _am_tools=none + fi], + + [pax], + [], + + [m4_fatal([Unknown tar format])]) + + AC_MSG_CHECKING([how to create a $1 tar archive]) + + # Go ahead even if we have the value already cached. We do so because we + # need to set the values for the 'am__tar' and 'am__untar' variables. + _am_tools=${am_cv_prog_tar_$1-$_am_tools} + + for _am_tool in $_am_tools; do + case $_am_tool in + gnutar) + for _am_tar in tar gnutar gtar; do + AM_RUN_LOG([$_am_tar --version]) && break + done + am__tar="$_am_tar --format=m4_if([$1], [pax], [posix], [$1]) -chf - "'"$$tardir"' + am__tar_="$_am_tar --format=m4_if([$1], [pax], [posix], [$1]) -chf - "'"$tardir"' + am__untar="$_am_tar -xf -" + ;; + plaintar) + # Must skip GNU tar: if it does not support --format= it doesn't create + # ustar tarball either. + (tar --version) >/dev/null 2>&1 && continue + am__tar='tar chf - "$$tardir"' + am__tar_='tar chf - "$tardir"' + am__untar='tar xf -' + ;; + pax) + am__tar='pax -L -x $1 -w "$$tardir"' + am__tar_='pax -L -x $1 -w "$tardir"' + am__untar='pax -r' + ;; + cpio) + am__tar='find "$$tardir" -print | cpio -o -H $1 -L' + am__tar_='find "$tardir" -print | cpio -o -H $1 -L' + am__untar='cpio -i -H $1 -d' + ;; + none) + am__tar=false + am__tar_=false + am__untar=false + ;; + esac + + # If the value was cached, stop now. We just wanted to have am__tar + # and am__untar set. + test -n "${am_cv_prog_tar_$1}" && break + + # tar/untar a dummy directory, and stop if the command works. + rm -rf conftest.dir + mkdir conftest.dir + echo GrepMe > conftest.dir/file + AM_RUN_LOG([tardir=conftest.dir && eval $am__tar_ >conftest.tar]) + rm -rf conftest.dir + if test -s conftest.tar; then + AM_RUN_LOG([$am__untar /dev/null 2>&1 && break + fi + done + rm -rf conftest.dir + + AC_CACHE_VAL([am_cv_prog_tar_$1], [am_cv_prog_tar_$1=$_am_tool]) + AC_MSG_RESULT([$am_cv_prog_tar_$1])]) + +AC_SUBST([am__tar]) +AC_SUBST([am__untar]) +]) # _AM_PROG_TAR + diff --git a/examples/yocto/meta-mini/recipes-hello/autohello/files/autohello/autogen.sh b/examples/yocto/meta-mini/recipes-hello/autohello/files/autohello/autogen.sh new file mode 100755 index 0000000..9088512 --- /dev/null +++ b/examples/yocto/meta-mini/recipes-hello/autohello/files/autohello/autogen.sh @@ -0,0 +1,2 @@ +#!/bin/bash +autoreconf -sif diff --git a/examples/yocto/meta-mini/recipes-hello/autohello/files/autohello/autohello-1.0.tar.gz b/examples/yocto/meta-mini/recipes-hello/autohello/files/autohello/autohello-1.0.tar.gz new file mode 100644 index 0000000..a0099eb Binary files /dev/null and b/examples/yocto/meta-mini/recipes-hello/autohello/files/autohello/autohello-1.0.tar.gz differ diff --git a/examples/yocto/meta-mini/recipes-hello/autohello/files/autohello/autohello-1.1.tar.gz b/examples/yocto/meta-mini/recipes-hello/autohello/files/autohello/autohello-1.1.tar.gz new file mode 100644 index 0000000..60e820c Binary files /dev/null and b/examples/yocto/meta-mini/recipes-hello/autohello/files/autohello/autohello-1.1.tar.gz differ diff --git a/examples/yocto/meta-mini/recipes-hello/autohello/files/autohello/autohello.c b/examples/yocto/meta-mini/recipes-hello/autohello/files/autohello/autohello.c new file mode 100644 index 0000000..d035085 --- /dev/null +++ b/examples/yocto/meta-mini/recipes-hello/autohello/files/autohello/autohello.c @@ -0,0 +1,12 @@ +#ifdef HAVE_CONFIG_H +#include "config.h" +#endif + +#include + +int main (int argc, char **argv) +{ + printf ("autohello poky world\n"); + + return 0; +} diff --git a/examples/yocto/meta-mini/recipes-hello/autohello/files/autohello/autom4te.cache/output.0 b/examples/yocto/meta-mini/recipes-hello/autohello/files/autohello/autom4te.cache/output.0 new file mode 100644 index 0000000..d8629ca --- /dev/null +++ b/examples/yocto/meta-mini/recipes-hello/autohello/files/autohello/autom4te.cache/output.0 @@ -0,0 +1,4905 @@ +@%:@! /bin/sh +@%:@ Guess values for system-dependent variables and create Makefiles. +@%:@ Generated by GNU Autoconf 2.69 for autohello 1.1. +@%:@ +@%:@ Report bugs to . +@%:@ +@%:@ +@%:@ Copyright (C) 1992-1996, 1998-2012 Free Software Foundation, Inc. +@%:@ +@%:@ +@%:@ This configure script is free software; the Free Software Foundation +@%:@ gives unlimited permission to copy, distribute and modify it. +## -------------------- ## +## M4sh Initialization. ## +## -------------------- ## + +# Be more Bourne compatible +DUALCASE=1; export DUALCASE # for MKS sh +if test -n "${ZSH_VERSION+set}" && (emulate sh) >/dev/null 2>&1; then : + emulate sh + NULLCMD=: + # Pre-4.2 versions of Zsh do word splitting on ${1+"$@"}, which + # is contrary to our usage. Disable this feature. + alias -g '${1+"$@"}'='"$@"' + setopt NO_GLOB_SUBST +else + case `(set -o) 2>/dev/null` in @%:@( + *posix*) : + set -o posix ;; @%:@( + *) : + ;; +esac +fi + + +as_nl=' +' +export as_nl +# Printing a long string crashes Solaris 7 /usr/bin/printf. +as_echo='\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\' +as_echo=$as_echo$as_echo$as_echo$as_echo$as_echo +as_echo=$as_echo$as_echo$as_echo$as_echo$as_echo$as_echo +# Prefer a ksh shell builtin over an external printf program on Solaris, +# but without wasting forks for bash or zsh. +if test -z "$BASH_VERSION$ZSH_VERSION" \ + && (test "X`print -r -- $as_echo`" = "X$as_echo") 2>/dev/null; then + as_echo='print -r --' + as_echo_n='print -rn --' +elif (test "X`printf %s $as_echo`" = "X$as_echo") 2>/dev/null; then + as_echo='printf %s\n' + as_echo_n='printf %s' +else + if test "X`(/usr/ucb/echo -n -n $as_echo) 2>/dev/null`" = "X-n $as_echo"; then + as_echo_body='eval /usr/ucb/echo -n "$1$as_nl"' + as_echo_n='/usr/ucb/echo -n' + else + as_echo_body='eval expr "X$1" : "X\\(.*\\)"' + as_echo_n_body='eval + arg=$1; + case $arg in @%:@( + *"$as_nl"*) + expr "X$arg" : "X\\(.*\\)$as_nl"; + arg=`expr "X$arg" : ".*$as_nl\\(.*\\)"`;; + esac; + expr "X$arg" : "X\\(.*\\)" | tr -d "$as_nl" + ' + export as_echo_n_body + as_echo_n='sh -c $as_echo_n_body as_echo' + fi + export as_echo_body + as_echo='sh -c $as_echo_body as_echo' +fi + +# The user is always right. +if test "${PATH_SEPARATOR+set}" != set; then + PATH_SEPARATOR=: + (PATH='/bin;/bin'; FPATH=$PATH; sh -c :) >/dev/null 2>&1 && { + (PATH='/bin:/bin'; FPATH=$PATH; sh -c :) >/dev/null 2>&1 || + PATH_SEPARATOR=';' + } +fi + + +# IFS +# We need space, tab and new line, in precisely that order. Quoting is +# there to prevent editors from complaining about space-tab. +# (If _AS_PATH_WALK were called with IFS unset, it would disable word +# splitting by setting IFS to empty value.) +IFS=" "" $as_nl" + +# Find who we are. Look in the path if we contain no directory separator. +as_myself= +case $0 in @%:@(( + *[\\/]* ) as_myself=$0 ;; + *) as_save_IFS=$IFS; IFS=$PATH_SEPARATOR +for as_dir in $PATH +do + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. + test -r "$as_dir/$0" && as_myself=$as_dir/$0 && break + done +IFS=$as_save_IFS + + ;; +esac +# We did not find ourselves, most probably we were run as `sh COMMAND' +# in which case we are not to be found in the path. +if test "x$as_myself" = x; then + as_myself=$0 +fi +if test ! -f "$as_myself"; then + $as_echo "$as_myself: error: cannot find myself; rerun with an absolute file name" >&2 + exit 1 +fi + +# Unset variables that we do not need and which cause bugs (e.g. in +# pre-3.0 UWIN ksh). But do not cause bugs in bash 2.01; the "|| exit 1" +# suppresses any "Segmentation fault" message there. '((' could +# trigger a bug in pdksh 5.2.14. +for as_var in BASH_ENV ENV MAIL MAILPATH +do eval test x\${$as_var+set} = xset \ + && ( (unset $as_var) || exit 1) >/dev/null 2>&1 && unset $as_var || : +done +PS1='$ ' +PS2='> ' +PS4='+ ' + +# NLS nuisances. +LC_ALL=C +export LC_ALL +LANGUAGE=C +export LANGUAGE + +# CDPATH. +(unset CDPATH) >/dev/null 2>&1 && unset CDPATH + +# Use a proper internal environment variable to ensure we don't fall + # into an infinite loop, continuously re-executing ourselves. + if test x"${_as_can_reexec}" != xno && test "x$CONFIG_SHELL" != x; then + _as_can_reexec=no; export _as_can_reexec; + # We cannot yet assume a decent shell, so we have to provide a +# neutralization value for shells without unset; and this also +# works around shells that cannot unset nonexistent variables. +# Preserve -v and -x to the replacement shell. +BASH_ENV=/dev/null +ENV=/dev/null +(unset BASH_ENV) >/dev/null 2>&1 && unset BASH_ENV ENV +case $- in @%:@ (((( + *v*x* | *x*v* ) as_opts=-vx ;; + *v* ) as_opts=-v ;; + *x* ) as_opts=-x ;; + * ) as_opts= ;; +esac +exec $CONFIG_SHELL $as_opts "$as_myself" ${1+"$@"} +# Admittedly, this is quite paranoid, since all the known shells bail +# out after a failed `exec'. +$as_echo "$0: could not re-execute with $CONFIG_SHELL" >&2 +as_fn_exit 255 + fi + # We don't want this to propagate to other subprocesses. + { _as_can_reexec=; unset _as_can_reexec;} +if test "x$CONFIG_SHELL" = x; then + as_bourne_compatible="if test -n \"\${ZSH_VERSION+set}\" && (emulate sh) >/dev/null 2>&1; then : + emulate sh + NULLCMD=: + # Pre-4.2 versions of Zsh do word splitting on \${1+\"\$@\"}, which + # is contrary to our usage. Disable this feature. + alias -g '\${1+\"\$@\"}'='\"\$@\"' + setopt NO_GLOB_SUBST +else + case \`(set -o) 2>/dev/null\` in @%:@( + *posix*) : + set -o posix ;; @%:@( + *) : + ;; +esac +fi +" + as_required="as_fn_return () { (exit \$1); } +as_fn_success () { as_fn_return 0; } +as_fn_failure () { as_fn_return 1; } +as_fn_ret_success () { return 0; } +as_fn_ret_failure () { return 1; } + +exitcode=0 +as_fn_success || { exitcode=1; echo as_fn_success failed.; } +as_fn_failure && { exitcode=1; echo as_fn_failure succeeded.; } +as_fn_ret_success || { exitcode=1; echo as_fn_ret_success failed.; } +as_fn_ret_failure && { exitcode=1; echo as_fn_ret_failure succeeded.; } +if ( set x; as_fn_ret_success y && test x = \"\$1\" ); then : + +else + exitcode=1; echo positional parameters were not saved. +fi +test x\$exitcode = x0 || exit 1 +test -x / || exit 1" + as_suggested=" as_lineno_1=";as_suggested=$as_suggested$LINENO;as_suggested=$as_suggested" as_lineno_1a=\$LINENO + as_lineno_2=";as_suggested=$as_suggested$LINENO;as_suggested=$as_suggested" as_lineno_2a=\$LINENO + eval 'test \"x\$as_lineno_1'\$as_run'\" != \"x\$as_lineno_2'\$as_run'\" && + test \"x\`expr \$as_lineno_1'\$as_run' + 1\`\" = \"x\$as_lineno_2'\$as_run'\"' || exit 1" + if (eval "$as_required") 2>/dev/null; then : + as_have_required=yes +else + as_have_required=no +fi + if test x$as_have_required = xyes && (eval "$as_suggested") 2>/dev/null; then : + +else + as_save_IFS=$IFS; IFS=$PATH_SEPARATOR +as_found=false +for as_dir in /bin$PATH_SEPARATOR/usr/bin$PATH_SEPARATOR$PATH +do + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. + as_found=: + case $as_dir in @%:@( + /*) + for as_base in sh bash ksh sh5; do + # Try only shells that exist, to save several forks. + as_shell=$as_dir/$as_base + if { test -f "$as_shell" || test -f "$as_shell.exe"; } && + { $as_echo "$as_bourne_compatible""$as_required" | as_run=a "$as_shell"; } 2>/dev/null; then : + CONFIG_SHELL=$as_shell as_have_required=yes + if { $as_echo "$as_bourne_compatible""$as_suggested" | as_run=a "$as_shell"; } 2>/dev/null; then : + break 2 +fi +fi + done;; + esac + as_found=false +done +$as_found || { if { test -f "$SHELL" || test -f "$SHELL.exe"; } && + { $as_echo "$as_bourne_compatible""$as_required" | as_run=a "$SHELL"; } 2>/dev/null; then : + CONFIG_SHELL=$SHELL as_have_required=yes +fi; } +IFS=$as_save_IFS + + + if test "x$CONFIG_SHELL" != x; then : + export CONFIG_SHELL + # We cannot yet assume a decent shell, so we have to provide a +# neutralization value for shells without unset; and this also +# works around shells that cannot unset nonexistent variables. +# Preserve -v and -x to the replacement shell. +BASH_ENV=/dev/null +ENV=/dev/null +(unset BASH_ENV) >/dev/null 2>&1 && unset BASH_ENV ENV +case $- in @%:@ (((( + *v*x* | *x*v* ) as_opts=-vx ;; + *v* ) as_opts=-v ;; + *x* ) as_opts=-x ;; + * ) as_opts= ;; +esac +exec $CONFIG_SHELL $as_opts "$as_myself" ${1+"$@"} +# Admittedly, this is quite paranoid, since all the known shells bail +# out after a failed `exec'. +$as_echo "$0: could not re-execute with $CONFIG_SHELL" >&2 +exit 255 +fi + + if test x$as_have_required = xno; then : + $as_echo "$0: This script requires a shell more modern than all" + $as_echo "$0: the shells that I found on your system." + if test x${ZSH_VERSION+set} = xset ; then + $as_echo "$0: In particular, zsh $ZSH_VERSION has bugs and should" + $as_echo "$0: be upgraded to zsh 4.3.4 or later." + else + $as_echo "$0: Please tell bug-autoconf@gnu.org and +$0: maunt@linutronix.de about your system, including any +$0: error possibly output before this message. Then install +$0: a modern shell, or manually run the script under such a +$0: shell if you do have one." + fi + exit 1 +fi +fi +fi +SHELL=${CONFIG_SHELL-/bin/sh} +export SHELL +# Unset more variables known to interfere with behavior of common tools. +CLICOLOR_FORCE= GREP_OPTIONS= +unset CLICOLOR_FORCE GREP_OPTIONS + +## --------------------- ## +## M4sh Shell Functions. ## +## --------------------- ## +@%:@ as_fn_unset VAR +@%:@ --------------- +@%:@ Portably unset VAR. +as_fn_unset () +{ + { eval $1=; unset $1;} +} +as_unset=as_fn_unset + +@%:@ as_fn_set_status STATUS +@%:@ ----------------------- +@%:@ Set @S|@? to STATUS, without forking. +as_fn_set_status () +{ + return $1 +} @%:@ as_fn_set_status + +@%:@ as_fn_exit STATUS +@%:@ ----------------- +@%:@ Exit the shell with STATUS, even in a "trap 0" or "set -e" context. +as_fn_exit () +{ + set +e + as_fn_set_status $1 + exit $1 +} @%:@ as_fn_exit + +@%:@ as_fn_mkdir_p +@%:@ ------------- +@%:@ Create "@S|@as_dir" as a directory, including parents if necessary. +as_fn_mkdir_p () +{ + + case $as_dir in #( + -*) as_dir=./$as_dir;; + esac + test -d "$as_dir" || eval $as_mkdir_p || { + as_dirs= + while :; do + case $as_dir in #( + *\'*) as_qdir=`$as_echo "$as_dir" | sed "s/'/'\\\\\\\\''/g"`;; #'( + *) as_qdir=$as_dir;; + esac + as_dirs="'$as_qdir' $as_dirs" + as_dir=`$as_dirname -- "$as_dir" || +$as_expr X"$as_dir" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \ + X"$as_dir" : 'X\(//\)[^/]' \| \ + X"$as_dir" : 'X\(//\)$' \| \ + X"$as_dir" : 'X\(/\)' \| . 2>/dev/null || +$as_echo X"$as_dir" | + sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ + s//\1/ + q + } + /^X\(\/\/\)[^/].*/{ + s//\1/ + q + } + /^X\(\/\/\)$/{ + s//\1/ + q + } + /^X\(\/\).*/{ + s//\1/ + q + } + s/.*/./; q'` + test -d "$as_dir" && break + done + test -z "$as_dirs" || eval "mkdir $as_dirs" + } || test -d "$as_dir" || as_fn_error $? "cannot create directory $as_dir" + + +} @%:@ as_fn_mkdir_p + +@%:@ as_fn_executable_p FILE +@%:@ ----------------------- +@%:@ Test if FILE is an executable regular file. +as_fn_executable_p () +{ + test -f "$1" && test -x "$1" +} @%:@ as_fn_executable_p +@%:@ as_fn_append VAR VALUE +@%:@ ---------------------- +@%:@ Append the text in VALUE to the end of the definition contained in VAR. Take +@%:@ advantage of any shell optimizations that allow amortized linear growth over +@%:@ repeated appends, instead of the typical quadratic growth present in naive +@%:@ implementations. +if (eval "as_var=1; as_var+=2; test x\$as_var = x12") 2>/dev/null; then : + eval 'as_fn_append () + { + eval $1+=\$2 + }' +else + as_fn_append () + { + eval $1=\$$1\$2 + } +fi # as_fn_append + +@%:@ as_fn_arith ARG... +@%:@ ------------------ +@%:@ Perform arithmetic evaluation on the ARGs, and store the result in the +@%:@ global @S|@as_val. Take advantage of shells that can avoid forks. The arguments +@%:@ must be portable across @S|@(()) and expr. +if (eval "test \$(( 1 + 1 )) = 2") 2>/dev/null; then : + eval 'as_fn_arith () + { + as_val=$(( $* )) + }' +else + as_fn_arith () + { + as_val=`expr "$@" || test $? -eq 1` + } +fi # as_fn_arith + + +@%:@ as_fn_error STATUS ERROR [LINENO LOG_FD] +@%:@ ---------------------------------------- +@%:@ Output "`basename @S|@0`: error: ERROR" to stderr. If LINENO and LOG_FD are +@%:@ provided, also output the error to LOG_FD, referencing LINENO. Then exit the +@%:@ script with STATUS, using 1 if that was 0. +as_fn_error () +{ + as_status=$1; test $as_status -eq 0 && as_status=1 + if test "$4"; then + as_lineno=${as_lineno-"$3"} as_lineno_stack=as_lineno_stack=$as_lineno_stack + $as_echo "$as_me:${as_lineno-$LINENO}: error: $2" >&$4 + fi + $as_echo "$as_me: error: $2" >&2 + as_fn_exit $as_status +} @%:@ as_fn_error + +if expr a : '\(a\)' >/dev/null 2>&1 && + test "X`expr 00001 : '.*\(...\)'`" = X001; then + as_expr=expr +else + as_expr=false +fi + +if (basename -- /) >/dev/null 2>&1 && test "X`basename -- / 2>&1`" = "X/"; then + as_basename=basename +else + as_basename=false +fi + +if (as_dir=`dirname -- /` && test "X$as_dir" = X/) >/dev/null 2>&1; then + as_dirname=dirname +else + as_dirname=false +fi + +as_me=`$as_basename -- "$0" || +$as_expr X/"$0" : '.*/\([^/][^/]*\)/*$' \| \ + X"$0" : 'X\(//\)$' \| \ + X"$0" : 'X\(/\)' \| . 2>/dev/null || +$as_echo X/"$0" | + sed '/^.*\/\([^/][^/]*\)\/*$/{ + s//\1/ + q + } + /^X\/\(\/\/\)$/{ + s//\1/ + q + } + /^X\/\(\/\).*/{ + s//\1/ + q + } + s/.*/./; q'` + +# Avoid depending upon Character Ranges. +as_cr_letters='abcdefghijklmnopqrstuvwxyz' +as_cr_LETTERS='ABCDEFGHIJKLMNOPQRSTUVWXYZ' +as_cr_Letters=$as_cr_letters$as_cr_LETTERS +as_cr_digits='0123456789' +as_cr_alnum=$as_cr_Letters$as_cr_digits + + + as_lineno_1=$LINENO as_lineno_1a=$LINENO + as_lineno_2=$LINENO as_lineno_2a=$LINENO + eval 'test "x$as_lineno_1'$as_run'" != "x$as_lineno_2'$as_run'" && + test "x`expr $as_lineno_1'$as_run' + 1`" = "x$as_lineno_2'$as_run'"' || { + # Blame Lee E. McMahon (1931-1989) for sed's syntax. :-) + sed -n ' + p + /[$]LINENO/= + ' <$as_myself | + sed ' + s/[$]LINENO.*/&-/ + t lineno + b + :lineno + N + :loop + s/[$]LINENO\([^'$as_cr_alnum'_].*\n\)\(.*\)/\2\1\2/ + t loop + s/-\n.*// + ' >$as_me.lineno && + chmod +x "$as_me.lineno" || + { $as_echo "$as_me: error: cannot create $as_me.lineno; rerun with a POSIX shell" >&2; as_fn_exit 1; } + + # If we had to re-execute with $CONFIG_SHELL, we're ensured to have + # already done that, so ensure we don't try to do so again and fall + # in an infinite loop. This has already happened in practice. + _as_can_reexec=no; export _as_can_reexec + # Don't try to exec as it changes $[0], causing all sort of problems + # (the dirname of $[0] is not the place where we might find the + # original and so on. Autoconf is especially sensitive to this). + . "./$as_me.lineno" + # Exit status is that of the last command. + exit +} + +ECHO_C= ECHO_N= ECHO_T= +case `echo -n x` in @%:@((((( +-n*) + case `echo 'xy\c'` in + *c*) ECHO_T=' ';; # ECHO_T is single tab character. + xy) ECHO_C='\c';; + *) echo `echo ksh88 bug on AIX 6.1` > /dev/null + ECHO_T=' ';; + esac;; +*) + ECHO_N='-n';; +esac + +rm -f conf$$ conf$$.exe conf$$.file +if test -d conf$$.dir; then + rm -f conf$$.dir/conf$$.file +else + rm -f conf$$.dir + mkdir conf$$.dir 2>/dev/null +fi +if (echo >conf$$.file) 2>/dev/null; then + if ln -s conf$$.file conf$$ 2>/dev/null; then + as_ln_s='ln -s' + # ... but there are two gotchas: + # 1) On MSYS, both `ln -s file dir' and `ln file dir' fail. + # 2) DJGPP < 2.04 has no symlinks; `ln -s' creates a wrapper executable. + # In both cases, we have to default to `cp -pR'. + ln -s conf$$.file conf$$.dir 2>/dev/null && test ! -f conf$$.exe || + as_ln_s='cp -pR' + elif ln conf$$.file conf$$ 2>/dev/null; then + as_ln_s=ln + else + as_ln_s='cp -pR' + fi +else + as_ln_s='cp -pR' +fi +rm -f conf$$ conf$$.exe conf$$.dir/conf$$.file conf$$.file +rmdir conf$$.dir 2>/dev/null + +if mkdir -p . 2>/dev/null; then + as_mkdir_p='mkdir -p "$as_dir"' +else + test -d ./-p && rmdir ./-p + as_mkdir_p=false +fi + +as_test_x='test -x' +as_executable_p=as_fn_executable_p + +# Sed expression to map a string onto a valid CPP name. +as_tr_cpp="eval sed 'y%*$as_cr_letters%P$as_cr_LETTERS%;s%[^_$as_cr_alnum]%_%g'" + +# Sed expression to map a string onto a valid variable name. +as_tr_sh="eval sed 'y%*+%pp%;s%[^_$as_cr_alnum]%_%g'" + + +test -n "$DJDIR" || exec 7<&0 &1 + +# Name of the host. +# hostname on some systems (SVR3.2, old GNU/Linux) returns a bogus exit status, +# so uname gets run too. +ac_hostname=`(hostname || uname -n) 2>/dev/null | sed 1q` + +# +# Initializations. +# +ac_default_prefix=/usr/local +ac_clean_files= +ac_config_libobj_dir=. +LIB@&t@OBJS= +cross_compiling=no +subdirs= +MFLAGS= +MAKEFLAGS= + +# Identity of this package. +PACKAGE_NAME='autohello' +PACKAGE_TARNAME='autohello' +PACKAGE_VERSION='1.1' +PACKAGE_STRING='autohello 1.1' +PACKAGE_BUGREPORT='maunt@linutronix.de' +PACKAGE_URL='' + +ac_unique_file="autohello.c" +ac_subst_vars='am__EXEEXT_FALSE +am__EXEEXT_TRUE +LTLIBOBJS +LIB@&t@OBJS +am__fastdepCC_FALSE +am__fastdepCC_TRUE +CCDEPMODE +am__nodep +AMDEPBACKSLASH +AMDEP_FALSE +AMDEP_TRUE +am__quote +am__include +DEPDIR +OBJEXT +EXEEXT +ac_ct_CC +CPPFLAGS +LDFLAGS +CFLAGS +CC +AM_BACKSLASH +AM_DEFAULT_VERBOSITY +AM_DEFAULT_V +AM_V +am__untar +am__tar +AMTAR +am__leading_dot +SET_MAKE +AWK +mkdir_p +MKDIR_P +INSTALL_STRIP_PROGRAM +STRIP +install_sh +MAKEINFO +AUTOHEADER +AUTOMAKE +AUTOCONF +ACLOCAL +VERSION +PACKAGE +CYGPATH_W +am__isrc +INSTALL_DATA +INSTALL_SCRIPT +INSTALL_PROGRAM +target_alias +host_alias +build_alias +LIBS +ECHO_T +ECHO_N +ECHO_C +DEFS +mandir +localedir +libdir +psdir +pdfdir +dvidir +htmldir +infodir +docdir +oldincludedir +includedir +localstatedir +sharedstatedir +sysconfdir +datadir +datarootdir +libexecdir +sbindir +bindir +program_transform_name +prefix +exec_prefix +PACKAGE_URL +PACKAGE_BUGREPORT +PACKAGE_STRING +PACKAGE_VERSION +PACKAGE_TARNAME +PACKAGE_NAME +PATH_SEPARATOR +SHELL' +ac_subst_files='' +ac_user_opts=' +enable_option_checking +enable_silent_rules +enable_dependency_tracking +' + ac_precious_vars='build_alias +host_alias +target_alias +CC +CFLAGS +LDFLAGS +LIBS +CPPFLAGS' + + +# Initialize some variables set by options. +ac_init_help= +ac_init_version=false +ac_unrecognized_opts= +ac_unrecognized_sep= +# The variables have the same names as the options, with +# dashes changed to underlines. +cache_file=/dev/null +exec_prefix=NONE +no_create= +no_recursion= +prefix=NONE +program_prefix=NONE +program_suffix=NONE +program_transform_name=s,x,x, +silent= +site= +srcdir= +verbose= +x_includes=NONE +x_libraries=NONE + +# Installation directory options. +# These are left unexpanded so users can "make install exec_prefix=/foo" +# and all the variables that are supposed to be based on exec_prefix +# by default will actually change. +# Use braces instead of parens because sh, perl, etc. also accept them. +# (The list follows the same order as the GNU Coding Standards.) +bindir='${exec_prefix}/bin' +sbindir='${exec_prefix}/sbin' +libexecdir='${exec_prefix}/libexec' +datarootdir='${prefix}/share' +datadir='${datarootdir}' +sysconfdir='${prefix}/etc' +sharedstatedir='${prefix}/com' +localstatedir='${prefix}/var' +includedir='${prefix}/include' +oldincludedir='/usr/include' +docdir='${datarootdir}/doc/${PACKAGE_TARNAME}' +infodir='${datarootdir}/info' +htmldir='${docdir}' +dvidir='${docdir}' +pdfdir='${docdir}' +psdir='${docdir}' +libdir='${exec_prefix}/lib' +localedir='${datarootdir}/locale' +mandir='${datarootdir}/man' + +ac_prev= +ac_dashdash= +for ac_option +do + # If the previous option needs an argument, assign it. + if test -n "$ac_prev"; then + eval $ac_prev=\$ac_option + ac_prev= + continue + fi + + case $ac_option in + *=?*) ac_optarg=`expr "X$ac_option" : '[^=]*=\(.*\)'` ;; + *=) ac_optarg= ;; + *) ac_optarg=yes ;; + esac + + # Accept the important Cygnus configure options, so we can diagnose typos. + + case $ac_dashdash$ac_option in + --) + ac_dashdash=yes ;; + + -bindir | --bindir | --bindi | --bind | --bin | --bi) + ac_prev=bindir ;; + -bindir=* | --bindir=* | --bindi=* | --bind=* | --bin=* | --bi=*) + bindir=$ac_optarg ;; + + -build | --build | --buil | --bui | --bu) + ac_prev=build_alias ;; + -build=* | --build=* | --buil=* | --bui=* | --bu=*) + build_alias=$ac_optarg ;; + + -cache-file | --cache-file | --cache-fil | --cache-fi \ + | --cache-f | --cache- | --cache | --cach | --cac | --ca | --c) + ac_prev=cache_file ;; + -cache-file=* | --cache-file=* | --cache-fil=* | --cache-fi=* \ + | --cache-f=* | --cache-=* | --cache=* | --cach=* | --cac=* | --ca=* | --c=*) + cache_file=$ac_optarg ;; + + --config-cache | -C) + cache_file=config.cache ;; + + -datadir | --datadir | --datadi | --datad) + ac_prev=datadir ;; + -datadir=* | --datadir=* | --datadi=* | --datad=*) + datadir=$ac_optarg ;; + + -datarootdir | --datarootdir | --datarootdi | --datarootd | --dataroot \ + | --dataroo | --dataro | --datar) + ac_prev=datarootdir ;; + -datarootdir=* | --datarootdir=* | --datarootdi=* | --datarootd=* \ + | --dataroot=* | --dataroo=* | --dataro=* | --datar=*) + datarootdir=$ac_optarg ;; + + -disable-* | --disable-*) + ac_useropt=`expr "x$ac_option" : 'x-*disable-\(.*\)'` + # Reject names that are not valid shell variable names. + expr "x$ac_useropt" : ".*[^-+._$as_cr_alnum]" >/dev/null && + as_fn_error $? "invalid feature name: $ac_useropt" + ac_useropt_orig=$ac_useropt + ac_useropt=`$as_echo "$ac_useropt" | sed 's/[-+.]/_/g'` + case $ac_user_opts in + *" +"enable_$ac_useropt" +"*) ;; + *) ac_unrecognized_opts="$ac_unrecognized_opts$ac_unrecognized_sep--disable-$ac_useropt_orig" + ac_unrecognized_sep=', ';; + esac + eval enable_$ac_useropt=no ;; + + -docdir | --docdir | --docdi | --doc | --do) + ac_prev=docdir ;; + -docdir=* | --docdir=* | --docdi=* | --doc=* | --do=*) + docdir=$ac_optarg ;; + + -dvidir | --dvidir | --dvidi | --dvid | --dvi | --dv) + ac_prev=dvidir ;; + -dvidir=* | --dvidir=* | --dvidi=* | --dvid=* | --dvi=* | --dv=*) + dvidir=$ac_optarg ;; + + -enable-* | --enable-*) + ac_useropt=`expr "x$ac_option" : 'x-*enable-\([^=]*\)'` + # Reject names that are not valid shell variable names. + expr "x$ac_useropt" : ".*[^-+._$as_cr_alnum]" >/dev/null && + as_fn_error $? "invalid feature name: $ac_useropt" + ac_useropt_orig=$ac_useropt + ac_useropt=`$as_echo "$ac_useropt" | sed 's/[-+.]/_/g'` + case $ac_user_opts in + *" +"enable_$ac_useropt" +"*) ;; + *) ac_unrecognized_opts="$ac_unrecognized_opts$ac_unrecognized_sep--enable-$ac_useropt_orig" + ac_unrecognized_sep=', ';; + esac + eval enable_$ac_useropt=\$ac_optarg ;; + + -exec-prefix | --exec_prefix | --exec-prefix | --exec-prefi \ + | --exec-pref | --exec-pre | --exec-pr | --exec-p | --exec- \ + | --exec | --exe | --ex) + ac_prev=exec_prefix ;; + -exec-prefix=* | --exec_prefix=* | --exec-prefix=* | --exec-prefi=* \ + | --exec-pref=* | --exec-pre=* | --exec-pr=* | --exec-p=* | --exec-=* \ + | --exec=* | --exe=* | --ex=*) + exec_prefix=$ac_optarg ;; + + -gas | --gas | --ga | --g) + # Obsolete; use --with-gas. + with_gas=yes ;; + + -help | --help | --hel | --he | -h) + ac_init_help=long ;; + -help=r* | --help=r* | --hel=r* | --he=r* | -hr*) + ac_init_help=recursive ;; + -help=s* | --help=s* | --hel=s* | --he=s* | -hs*) + ac_init_help=short ;; + + -host | --host | --hos | --ho) + ac_prev=host_alias ;; + -host=* | --host=* | --hos=* | --ho=*) + host_alias=$ac_optarg ;; + + -htmldir | --htmldir | --htmldi | --htmld | --html | --htm | --ht) + ac_prev=htmldir ;; + -htmldir=* | --htmldir=* | --htmldi=* | --htmld=* | --html=* | --htm=* \ + | --ht=*) + htmldir=$ac_optarg ;; + + -includedir | --includedir | --includedi | --included | --include \ + | --includ | --inclu | --incl | --inc) + ac_prev=includedir ;; + -includedir=* | --includedir=* | --includedi=* | --included=* | --include=* \ + | --includ=* | --inclu=* | --incl=* | --inc=*) + includedir=$ac_optarg ;; + + -infodir | --infodir | --infodi | --infod | --info | --inf) + ac_prev=infodir ;; + -infodir=* | --infodir=* | --infodi=* | --infod=* | --info=* | --inf=*) + infodir=$ac_optarg ;; + + -libdir | --libdir | --libdi | --libd) + ac_prev=libdir ;; + -libdir=* | --libdir=* | --libdi=* | --libd=*) + libdir=$ac_optarg ;; + + -libexecdir | --libexecdir | --libexecdi | --libexecd | --libexec \ + | --libexe | --libex | --libe) + ac_prev=libexecdir ;; + -libexecdir=* | --libexecdir=* | --libexecdi=* | --libexecd=* | --libexec=* \ + | --libexe=* | --libex=* | --libe=*) + libexecdir=$ac_optarg ;; + + -localedir | --localedir | --localedi | --localed | --locale) + ac_prev=localedir ;; + -localedir=* | --localedir=* | --localedi=* | --localed=* | --locale=*) + localedir=$ac_optarg ;; + + -localstatedir | --localstatedir | --localstatedi | --localstated \ + | --localstate | --localstat | --localsta | --localst | --locals) + ac_prev=localstatedir ;; + -localstatedir=* | --localstatedir=* | --localstatedi=* | --localstated=* \ + | --localstate=* | --localstat=* | --localsta=* | --localst=* | --locals=*) + localstatedir=$ac_optarg ;; + + -mandir | --mandir | --mandi | --mand | --man | --ma | --m) + ac_prev=mandir ;; + -mandir=* | --mandir=* | --mandi=* | --mand=* | --man=* | --ma=* | --m=*) + mandir=$ac_optarg ;; + + -nfp | --nfp | --nf) + # Obsolete; use --without-fp. + with_fp=no ;; + + -no-create | --no-create | --no-creat | --no-crea | --no-cre \ + | --no-cr | --no-c | -n) + no_create=yes ;; + + -no-recursion | --no-recursion | --no-recursio | --no-recursi \ + | --no-recurs | --no-recur | --no-recu | --no-rec | --no-re | --no-r) + no_recursion=yes ;; + + -oldincludedir | --oldincludedir | --oldincludedi | --oldincluded \ + | --oldinclude | --oldinclud | --oldinclu | --oldincl | --oldinc \ + | --oldin | --oldi | --old | --ol | --o) + ac_prev=oldincludedir ;; + -oldincludedir=* | --oldincludedir=* | --oldincludedi=* | --oldincluded=* \ + | --oldinclude=* | --oldinclud=* | --oldinclu=* | --oldincl=* | --oldinc=* \ + | --oldin=* | --oldi=* | --old=* | --ol=* | --o=*) + oldincludedir=$ac_optarg ;; + + -prefix | --prefix | --prefi | --pref | --pre | --pr | --p) + ac_prev=prefix ;; + -prefix=* | --prefix=* | --prefi=* | --pref=* | --pre=* | --pr=* | --p=*) + prefix=$ac_optarg ;; + + -program-prefix | --program-prefix | --program-prefi | --program-pref \ + | --program-pre | --program-pr | --program-p) + ac_prev=program_prefix ;; + -program-prefix=* | --program-prefix=* | --program-prefi=* \ + | --program-pref=* | --program-pre=* | --program-pr=* | --program-p=*) + program_prefix=$ac_optarg ;; + + -program-suffix | --program-suffix | --program-suffi | --program-suff \ + | --program-suf | --program-su | --program-s) + ac_prev=program_suffix ;; + -program-suffix=* | --program-suffix=* | --program-suffi=* \ + | --program-suff=* | --program-suf=* | --program-su=* | --program-s=*) + program_suffix=$ac_optarg ;; + + -program-transform-name | --program-transform-name \ + | --program-transform-nam | --program-transform-na \ + | --program-transform-n | --program-transform- \ + | --program-transform | --program-transfor \ + | --program-transfo | --program-transf \ + | --program-trans | --program-tran \ + | --progr-tra | --program-tr | --program-t) + ac_prev=program_transform_name ;; + -program-transform-name=* | --program-transform-name=* \ + | --program-transform-nam=* | --program-transform-na=* \ + | --program-transform-n=* | --program-transform-=* \ + | --program-transform=* | --program-transfor=* \ + | --program-transfo=* | --program-transf=* \ + | --program-trans=* | --program-tran=* \ + | --progr-tra=* | --program-tr=* | --program-t=*) + program_transform_name=$ac_optarg ;; + + -pdfdir | --pdfdir | --pdfdi | --pdfd | --pdf | --pd) + ac_prev=pdfdir ;; + -pdfdir=* | --pdfdir=* | --pdfdi=* | --pdfd=* | --pdf=* | --pd=*) + pdfdir=$ac_optarg ;; + + -psdir | --psdir | --psdi | --psd | --ps) + ac_prev=psdir ;; + -psdir=* | --psdir=* | --psdi=* | --psd=* | --ps=*) + psdir=$ac_optarg ;; + + -q | -quiet | --quiet | --quie | --qui | --qu | --q \ + | -silent | --silent | --silen | --sile | --sil) + silent=yes ;; + + -sbindir | --sbindir | --sbindi | --sbind | --sbin | --sbi | --sb) + ac_prev=sbindir ;; + -sbindir=* | --sbindir=* | --sbindi=* | --sbind=* | --sbin=* \ + | --sbi=* | --sb=*) + sbindir=$ac_optarg ;; + + -sharedstatedir | --sharedstatedir | --sharedstatedi \ + | --sharedstated | --sharedstate | --sharedstat | --sharedsta \ + | --sharedst | --shareds | --shared | --share | --shar \ + | --sha | --sh) + ac_prev=sharedstatedir ;; + -sharedstatedir=* | --sharedstatedir=* | --sharedstatedi=* \ + | --sharedstated=* | --sharedstate=* | --sharedstat=* | --sharedsta=* \ + | --sharedst=* | --shareds=* | --shared=* | --share=* | --shar=* \ + | --sha=* | --sh=*) + sharedstatedir=$ac_optarg ;; + + -site | --site | --sit) + ac_prev=site ;; + -site=* | --site=* | --sit=*) + site=$ac_optarg ;; + + -srcdir | --srcdir | --srcdi | --srcd | --src | --sr) + ac_prev=srcdir ;; + -srcdir=* | --srcdir=* | --srcdi=* | --srcd=* | --src=* | --sr=*) + srcdir=$ac_optarg ;; + + -sysconfdir | --sysconfdir | --sysconfdi | --sysconfd | --sysconf \ + | --syscon | --sysco | --sysc | --sys | --sy) + ac_prev=sysconfdir ;; + -sysconfdir=* | --sysconfdir=* | --sysconfdi=* | --sysconfd=* | --sysconf=* \ + | --syscon=* | --sysco=* | --sysc=* | --sys=* | --sy=*) + sysconfdir=$ac_optarg ;; + + -target | --target | --targe | --targ | --tar | --ta | --t) + ac_prev=target_alias ;; + -target=* | --target=* | --targe=* | --targ=* | --tar=* | --ta=* | --t=*) + target_alias=$ac_optarg ;; + + -v | -verbose | --verbose | --verbos | --verbo | --verb) + verbose=yes ;; + + -version | --version | --versio | --versi | --vers | -V) + ac_init_version=: ;; + + -with-* | --with-*) + ac_useropt=`expr "x$ac_option" : 'x-*with-\([^=]*\)'` + # Reject names that are not valid shell variable names. + expr "x$ac_useropt" : ".*[^-+._$as_cr_alnum]" >/dev/null && + as_fn_error $? "invalid package name: $ac_useropt" + ac_useropt_orig=$ac_useropt + ac_useropt=`$as_echo "$ac_useropt" | sed 's/[-+.]/_/g'` + case $ac_user_opts in + *" +"with_$ac_useropt" +"*) ;; + *) ac_unrecognized_opts="$ac_unrecognized_opts$ac_unrecognized_sep--with-$ac_useropt_orig" + ac_unrecognized_sep=', ';; + esac + eval with_$ac_useropt=\$ac_optarg ;; + + -without-* | --without-*) + ac_useropt=`expr "x$ac_option" : 'x-*without-\(.*\)'` + # Reject names that are not valid shell variable names. + expr "x$ac_useropt" : ".*[^-+._$as_cr_alnum]" >/dev/null && + as_fn_error $? "invalid package name: $ac_useropt" + ac_useropt_orig=$ac_useropt + ac_useropt=`$as_echo "$ac_useropt" | sed 's/[-+.]/_/g'` + case $ac_user_opts in + *" +"with_$ac_useropt" +"*) ;; + *) ac_unrecognized_opts="$ac_unrecognized_opts$ac_unrecognized_sep--without-$ac_useropt_orig" + ac_unrecognized_sep=', ';; + esac + eval with_$ac_useropt=no ;; + + --x) + # Obsolete; use --with-x. + with_x=yes ;; + + -x-includes | --x-includes | --x-include | --x-includ | --x-inclu \ + | --x-incl | --x-inc | --x-in | --x-i) + ac_prev=x_includes ;; + -x-includes=* | --x-includes=* | --x-include=* | --x-includ=* | --x-inclu=* \ + | --x-incl=* | --x-inc=* | --x-in=* | --x-i=*) + x_includes=$ac_optarg ;; + + -x-libraries | --x-libraries | --x-librarie | --x-librari \ + | --x-librar | --x-libra | --x-libr | --x-lib | --x-li | --x-l) + ac_prev=x_libraries ;; + -x-libraries=* | --x-libraries=* | --x-librarie=* | --x-librari=* \ + | --x-librar=* | --x-libra=* | --x-libr=* | --x-lib=* | --x-li=* | --x-l=*) + x_libraries=$ac_optarg ;; + + -*) as_fn_error $? "unrecognized option: \`$ac_option' +Try \`$0 --help' for more information" + ;; + + *=*) + ac_envvar=`expr "x$ac_option" : 'x\([^=]*\)='` + # Reject names that are not valid shell variable names. + case $ac_envvar in #( + '' | [0-9]* | *[!_$as_cr_alnum]* ) + as_fn_error $? "invalid variable name: \`$ac_envvar'" ;; + esac + eval $ac_envvar=\$ac_optarg + export $ac_envvar ;; + + *) + # FIXME: should be removed in autoconf 3.0. + $as_echo "$as_me: WARNING: you should use --build, --host, --target" >&2 + expr "x$ac_option" : ".*[^-._$as_cr_alnum]" >/dev/null && + $as_echo "$as_me: WARNING: invalid host type: $ac_option" >&2 + : "${build_alias=$ac_option} ${host_alias=$ac_option} ${target_alias=$ac_option}" + ;; + + esac +done + +if test -n "$ac_prev"; then + ac_option=--`echo $ac_prev | sed 's/_/-/g'` + as_fn_error $? "missing argument to $ac_option" +fi + +if test -n "$ac_unrecognized_opts"; then + case $enable_option_checking in + no) ;; + fatal) as_fn_error $? "unrecognized options: $ac_unrecognized_opts" ;; + *) $as_echo "$as_me: WARNING: unrecognized options: $ac_unrecognized_opts" >&2 ;; + esac +fi + +# Check all directory arguments for consistency. +for ac_var in exec_prefix prefix bindir sbindir libexecdir datarootdir \ + datadir sysconfdir sharedstatedir localstatedir includedir \ + oldincludedir docdir infodir htmldir dvidir pdfdir psdir \ + libdir localedir mandir +do + eval ac_val=\$$ac_var + # Remove trailing slashes. + case $ac_val in + */ ) + ac_val=`expr "X$ac_val" : 'X\(.*[^/]\)' \| "X$ac_val" : 'X\(.*\)'` + eval $ac_var=\$ac_val;; + esac + # Be sure to have absolute directory names. + case $ac_val in + [\\/$]* | ?:[\\/]* ) continue;; + NONE | '' ) case $ac_var in *prefix ) continue;; esac;; + esac + as_fn_error $? "expected an absolute directory name for --$ac_var: $ac_val" +done + +# There might be people who depend on the old broken behavior: `$host' +# used to hold the argument of --host etc. +# FIXME: To remove some day. +build=$build_alias +host=$host_alias +target=$target_alias + +# FIXME: To remove some day. +if test "x$host_alias" != x; then + if test "x$build_alias" = x; then + cross_compiling=maybe + elif test "x$build_alias" != "x$host_alias"; then + cross_compiling=yes + fi +fi + +ac_tool_prefix= +test -n "$host_alias" && ac_tool_prefix=$host_alias- + +test "$silent" = yes && exec 6>/dev/null + + +ac_pwd=`pwd` && test -n "$ac_pwd" && +ac_ls_di=`ls -di .` && +ac_pwd_ls_di=`cd "$ac_pwd" && ls -di .` || + as_fn_error $? "working directory cannot be determined" +test "X$ac_ls_di" = "X$ac_pwd_ls_di" || + as_fn_error $? "pwd does not report name of working directory" + + +# Find the source files, if location was not specified. +if test -z "$srcdir"; then + ac_srcdir_defaulted=yes + # Try the directory containing this script, then the parent directory. + ac_confdir=`$as_dirname -- "$as_myself" || +$as_expr X"$as_myself" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \ + X"$as_myself" : 'X\(//\)[^/]' \| \ + X"$as_myself" : 'X\(//\)$' \| \ + X"$as_myself" : 'X\(/\)' \| . 2>/dev/null || +$as_echo X"$as_myself" | + sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ + s//\1/ + q + } + /^X\(\/\/\)[^/].*/{ + s//\1/ + q + } + /^X\(\/\/\)$/{ + s//\1/ + q + } + /^X\(\/\).*/{ + s//\1/ + q + } + s/.*/./; q'` + srcdir=$ac_confdir + if test ! -r "$srcdir/$ac_unique_file"; then + srcdir=.. + fi +else + ac_srcdir_defaulted=no +fi +if test ! -r "$srcdir/$ac_unique_file"; then + test "$ac_srcdir_defaulted" = yes && srcdir="$ac_confdir or .." + as_fn_error $? "cannot find sources ($ac_unique_file) in $srcdir" +fi +ac_msg="sources are in $srcdir, but \`cd $srcdir' does not work" +ac_abs_confdir=`( + cd "$srcdir" && test -r "./$ac_unique_file" || as_fn_error $? "$ac_msg" + pwd)` +# When building in place, set srcdir=. +if test "$ac_abs_confdir" = "$ac_pwd"; then + srcdir=. +fi +# Remove unnecessary trailing slashes from srcdir. +# Double slashes in file names in object file debugging info +# mess up M-x gdb in Emacs. +case $srcdir in +*/) srcdir=`expr "X$srcdir" : 'X\(.*[^/]\)' \| "X$srcdir" : 'X\(.*\)'`;; +esac +for ac_var in $ac_precious_vars; do + eval ac_env_${ac_var}_set=\${${ac_var}+set} + eval ac_env_${ac_var}_value=\$${ac_var} + eval ac_cv_env_${ac_var}_set=\${${ac_var}+set} + eval ac_cv_env_${ac_var}_value=\$${ac_var} +done + +# +# Report the --help message. +# +if test "$ac_init_help" = "long"; then + # Omit some internal or obsolete options to make the list less imposing. + # This message is too long to be a string in the A/UX 3.1 sh. + cat <<_ACEOF +\`configure' configures autohello 1.1 to adapt to many kinds of systems. + +Usage: $0 [OPTION]... [VAR=VALUE]... + +To assign environment variables (e.g., CC, CFLAGS...), specify them as +VAR=VALUE. See below for descriptions of some of the useful variables. + +Defaults for the options are specified in brackets. + +Configuration: + -h, --help display this help and exit + --help=short display options specific to this package + --help=recursive display the short help of all the included packages + -V, --version display version information and exit + -q, --quiet, --silent do not print \`checking ...' messages + --cache-file=FILE cache test results in FILE [disabled] + -C, --config-cache alias for \`--cache-file=config.cache' + -n, --no-create do not create output files + --srcdir=DIR find the sources in DIR [configure dir or \`..'] + +Installation directories: + --prefix=PREFIX install architecture-independent files in PREFIX + @<:@@S|@ac_default_prefix@:>@ + --exec-prefix=EPREFIX install architecture-dependent files in EPREFIX + @<:@PREFIX@:>@ + +By default, \`make install' will install all the files in +\`$ac_default_prefix/bin', \`$ac_default_prefix/lib' etc. You can specify +an installation prefix other than \`$ac_default_prefix' using \`--prefix', +for instance \`--prefix=\$HOME'. + +For better control, use the options below. + +Fine tuning of the installation directories: + --bindir=DIR user executables [EPREFIX/bin] + --sbindir=DIR system admin executables [EPREFIX/sbin] + --libexecdir=DIR program executables [EPREFIX/libexec] + --sysconfdir=DIR read-only single-machine data [PREFIX/etc] + --sharedstatedir=DIR modifiable architecture-independent data [PREFIX/com] + --localstatedir=DIR modifiable single-machine data [PREFIX/var] + --libdir=DIR object code libraries [EPREFIX/lib] + --includedir=DIR C header files [PREFIX/include] + --oldincludedir=DIR C header files for non-gcc [/usr/include] + --datarootdir=DIR read-only arch.-independent data root [PREFIX/share] + --datadir=DIR read-only architecture-independent data [DATAROOTDIR] + --infodir=DIR info documentation [DATAROOTDIR/info] + --localedir=DIR locale-dependent data [DATAROOTDIR/locale] + --mandir=DIR man documentation [DATAROOTDIR/man] + --docdir=DIR documentation root @<:@DATAROOTDIR/doc/autohello@:>@ + --htmldir=DIR html documentation [DOCDIR] + --dvidir=DIR dvi documentation [DOCDIR] + --pdfdir=DIR pdf documentation [DOCDIR] + --psdir=DIR ps documentation [DOCDIR] +_ACEOF + + cat <<\_ACEOF + +Program names: + --program-prefix=PREFIX prepend PREFIX to installed program names + --program-suffix=SUFFIX append SUFFIX to installed program names + --program-transform-name=PROGRAM run sed PROGRAM on installed program names +_ACEOF +fi + +if test -n "$ac_init_help"; then + case $ac_init_help in + short | recursive ) echo "Configuration of autohello 1.1:";; + esac + cat <<\_ACEOF + +Optional Features: + --disable-option-checking ignore unrecognized --enable/--with options + --disable-FEATURE do not include FEATURE (same as --enable-FEATURE=no) + --enable-FEATURE[=ARG] include FEATURE [ARG=yes] + --enable-silent-rules less verbose build output (undo: "make V=1") + --disable-silent-rules verbose build output (undo: "make V=0") + --enable-dependency-tracking + do not reject slow dependency extractors + --disable-dependency-tracking + speeds up one-time build + +Some influential environment variables: + CC C compiler command + CFLAGS C compiler flags + LDFLAGS linker flags, e.g. -L if you have libraries in a + nonstandard directory + LIBS libraries to pass to the linker, e.g. -l + CPPFLAGS (Objective) C/C++ preprocessor flags, e.g. -I if + you have headers in a nonstandard directory + +Use these variables to override the choices made by `configure' or to help +it to find libraries and programs with nonstandard names/locations. + +Report bugs to . +_ACEOF +ac_status=$? +fi + +if test "$ac_init_help" = "recursive"; then + # If there are subdirs, report their specific --help. + for ac_dir in : $ac_subdirs_all; do test "x$ac_dir" = x: && continue + test -d "$ac_dir" || + { cd "$srcdir" && ac_pwd=`pwd` && srcdir=. && test -d "$ac_dir"; } || + continue + ac_builddir=. + +case "$ac_dir" in +.) ac_dir_suffix= ac_top_builddir_sub=. ac_top_build_prefix= ;; +*) + ac_dir_suffix=/`$as_echo "$ac_dir" | sed 's|^\.[\\/]||'` + # A ".." for each directory in $ac_dir_suffix. + ac_top_builddir_sub=`$as_echo "$ac_dir_suffix" | sed 's|/[^\\/]*|/..|g;s|/||'` + case $ac_top_builddir_sub in + "") ac_top_builddir_sub=. ac_top_build_prefix= ;; + *) ac_top_build_prefix=$ac_top_builddir_sub/ ;; + esac ;; +esac +ac_abs_top_builddir=$ac_pwd +ac_abs_builddir=$ac_pwd$ac_dir_suffix +# for backward compatibility: +ac_top_builddir=$ac_top_build_prefix + +case $srcdir in + .) # We are building in place. + ac_srcdir=. + ac_top_srcdir=$ac_top_builddir_sub + ac_abs_top_srcdir=$ac_pwd ;; + [\\/]* | ?:[\\/]* ) # Absolute name. + ac_srcdir=$srcdir$ac_dir_suffix; + ac_top_srcdir=$srcdir + ac_abs_top_srcdir=$srcdir ;; + *) # Relative name. + ac_srcdir=$ac_top_build_prefix$srcdir$ac_dir_suffix + ac_top_srcdir=$ac_top_build_prefix$srcdir + ac_abs_top_srcdir=$ac_pwd/$srcdir ;; +esac +ac_abs_srcdir=$ac_abs_top_srcdir$ac_dir_suffix + + cd "$ac_dir" || { ac_status=$?; continue; } + # Check for guested configure. + if test -f "$ac_srcdir/configure.gnu"; then + echo && + $SHELL "$ac_srcdir/configure.gnu" --help=recursive + elif test -f "$ac_srcdir/configure"; then + echo && + $SHELL "$ac_srcdir/configure" --help=recursive + else + $as_echo "$as_me: WARNING: no configuration information is in $ac_dir" >&2 + fi || ac_status=$? + cd "$ac_pwd" || { ac_status=$?; break; } + done +fi + +test -n "$ac_init_help" && exit $ac_status +if $ac_init_version; then + cat <<\_ACEOF +autohello configure 1.1 +generated by GNU Autoconf 2.69 + +Copyright (C) 2012 Free Software Foundation, Inc. +This configure script is free software; the Free Software Foundation +gives unlimited permission to copy, distribute and modify it. +_ACEOF + exit +fi + +## ------------------------ ## +## Autoconf initialization. ## +## ------------------------ ## + +@%:@ ac_fn_c_try_compile LINENO +@%:@ -------------------------- +@%:@ Try to compile conftest.@S|@ac_ext, and return whether this succeeded. +ac_fn_c_try_compile () +{ + as_lineno=${as_lineno-"$1"} as_lineno_stack=as_lineno_stack=$as_lineno_stack + rm -f conftest.$ac_objext + if { { ac_try="$ac_compile" +case "(($ac_try" in + *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; + *) ac_try_echo=$ac_try;; +esac +eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\"" +$as_echo "$ac_try_echo"; } >&5 + (eval "$ac_compile") 2>conftest.err + ac_status=$? + if test -s conftest.err; then + grep -v '^ *+' conftest.err >conftest.er1 + cat conftest.er1 >&5 + mv -f conftest.er1 conftest.err + fi + $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 + test $ac_status = 0; } && { + test -z "$ac_c_werror_flag" || + test ! -s conftest.err + } && test -s conftest.$ac_objext; then : + ac_retval=0 +else + $as_echo "$as_me: failed program was:" >&5 +sed 's/^/| /' conftest.$ac_ext >&5 + + ac_retval=1 +fi + eval $as_lineno_stack; ${as_lineno_stack:+:} unset as_lineno + as_fn_set_status $ac_retval + +} @%:@ ac_fn_c_try_compile +cat >config.log <<_ACEOF +This file contains any messages produced by compilers while +running configure, to aid debugging if configure makes a mistake. + +It was created by autohello $as_me 1.1, which was +generated by GNU Autoconf 2.69. Invocation command line was + + $ $0 $@ + +_ACEOF +exec 5>>config.log +{ +cat <<_ASUNAME +## --------- ## +## Platform. ## +## --------- ## + +hostname = `(hostname || uname -n) 2>/dev/null | sed 1q` +uname -m = `(uname -m) 2>/dev/null || echo unknown` +uname -r = `(uname -r) 2>/dev/null || echo unknown` +uname -s = `(uname -s) 2>/dev/null || echo unknown` +uname -v = `(uname -v) 2>/dev/null || echo unknown` + +/usr/bin/uname -p = `(/usr/bin/uname -p) 2>/dev/null || echo unknown` +/bin/uname -X = `(/bin/uname -X) 2>/dev/null || echo unknown` + +/bin/arch = `(/bin/arch) 2>/dev/null || echo unknown` +/usr/bin/arch -k = `(/usr/bin/arch -k) 2>/dev/null || echo unknown` +/usr/convex/getsysinfo = `(/usr/convex/getsysinfo) 2>/dev/null || echo unknown` +/usr/bin/hostinfo = `(/usr/bin/hostinfo) 2>/dev/null || echo unknown` +/bin/machine = `(/bin/machine) 2>/dev/null || echo unknown` +/usr/bin/oslevel = `(/usr/bin/oslevel) 2>/dev/null || echo unknown` +/bin/universe = `(/bin/universe) 2>/dev/null || echo unknown` + +_ASUNAME + +as_save_IFS=$IFS; IFS=$PATH_SEPARATOR +for as_dir in $PATH +do + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. + $as_echo "PATH: $as_dir" + done +IFS=$as_save_IFS + +} >&5 + +cat >&5 <<_ACEOF + + +## ----------- ## +## Core tests. ## +## ----------- ## + +_ACEOF + + +# Keep a trace of the command line. +# Strip out --no-create and --no-recursion so they do not pile up. +# Strip out --silent because we don't want to record it for future runs. +# Also quote any args containing shell meta-characters. +# Make two passes to allow for proper duplicate-argument suppression. +ac_configure_args= +ac_configure_args0= +ac_configure_args1= +ac_must_keep_next=false +for ac_pass in 1 2 +do + for ac_arg + do + case $ac_arg in + -no-create | --no-c* | -n | -no-recursion | --no-r*) continue ;; + -q | -quiet | --quiet | --quie | --qui | --qu | --q \ + | -silent | --silent | --silen | --sile | --sil) + continue ;; + *\'*) + ac_arg=`$as_echo "$ac_arg" | sed "s/'/'\\\\\\\\''/g"` ;; + esac + case $ac_pass in + 1) as_fn_append ac_configure_args0 " '$ac_arg'" ;; + 2) + as_fn_append ac_configure_args1 " '$ac_arg'" + if test $ac_must_keep_next = true; then + ac_must_keep_next=false # Got value, back to normal. + else + case $ac_arg in + *=* | --config-cache | -C | -disable-* | --disable-* \ + | -enable-* | --enable-* | -gas | --g* | -nfp | --nf* \ + | -q | -quiet | --q* | -silent | --sil* | -v | -verb* \ + | -with-* | --with-* | -without-* | --without-* | --x) + case "$ac_configure_args0 " in + "$ac_configure_args1"*" '$ac_arg' "* ) continue ;; + esac + ;; + -* ) ac_must_keep_next=true ;; + esac + fi + as_fn_append ac_configure_args " '$ac_arg'" + ;; + esac + done +done +{ ac_configure_args0=; unset ac_configure_args0;} +{ ac_configure_args1=; unset ac_configure_args1;} + +# When interrupted or exit'd, cleanup temporary files, and complete +# config.log. We remove comments because anyway the quotes in there +# would cause problems or look ugly. +# WARNING: Use '\'' to represent an apostrophe within the trap. +# WARNING: Do not start the trap code with a newline, due to a FreeBSD 4.0 bug. +trap 'exit_status=$? + # Save into config.log some information that might help in debugging. + { + echo + + $as_echo "## ---------------- ## +## Cache variables. ## +## ---------------- ##" + echo + # The following way of writing the cache mishandles newlines in values, +( + for ac_var in `(set) 2>&1 | sed -n '\''s/^\([a-zA-Z_][a-zA-Z0-9_]*\)=.*/\1/p'\''`; do + eval ac_val=\$$ac_var + case $ac_val in #( + *${as_nl}*) + case $ac_var in #( + *_cv_*) { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: cache variable $ac_var contains a newline" >&5 +$as_echo "$as_me: WARNING: cache variable $ac_var contains a newline" >&2;} ;; + esac + case $ac_var in #( + _ | IFS | as_nl) ;; #( + BASH_ARGV | BASH_SOURCE) eval $ac_var= ;; #( + *) { eval $ac_var=; unset $ac_var;} ;; + esac ;; + esac + done + (set) 2>&1 | + case $as_nl`(ac_space='\'' '\''; set) 2>&1` in #( + *${as_nl}ac_space=\ *) + sed -n \ + "s/'\''/'\''\\\\'\'''\''/g; + s/^\\([_$as_cr_alnum]*_cv_[_$as_cr_alnum]*\\)=\\(.*\\)/\\1='\''\\2'\''/p" + ;; #( + *) + sed -n "/^[_$as_cr_alnum]*_cv_[_$as_cr_alnum]*=/p" + ;; + esac | + sort +) + echo + + $as_echo "## ----------------- ## +## Output variables. ## +## ----------------- ##" + echo + for ac_var in $ac_subst_vars + do + eval ac_val=\$$ac_var + case $ac_val in + *\'\''*) ac_val=`$as_echo "$ac_val" | sed "s/'\''/'\''\\\\\\\\'\'''\''/g"`;; + esac + $as_echo "$ac_var='\''$ac_val'\''" + done | sort + echo + + if test -n "$ac_subst_files"; then + $as_echo "## ------------------- ## +## File substitutions. ## +## ------------------- ##" + echo + for ac_var in $ac_subst_files + do + eval ac_val=\$$ac_var + case $ac_val in + *\'\''*) ac_val=`$as_echo "$ac_val" | sed "s/'\''/'\''\\\\\\\\'\'''\''/g"`;; + esac + $as_echo "$ac_var='\''$ac_val'\''" + done | sort + echo + fi + + if test -s confdefs.h; then + $as_echo "## ----------- ## +## confdefs.h. ## +## ----------- ##" + echo + cat confdefs.h + echo + fi + test "$ac_signal" != 0 && + $as_echo "$as_me: caught signal $ac_signal" + $as_echo "$as_me: exit $exit_status" + } >&5 + rm -f core *.core core.conftest.* && + rm -f -r conftest* confdefs* conf$$* $ac_clean_files && + exit $exit_status +' 0 +for ac_signal in 1 2 13 15; do + trap 'ac_signal='$ac_signal'; as_fn_exit 1' $ac_signal +done +ac_signal=0 + +# confdefs.h avoids OS command line length limits that DEFS can exceed. +rm -f -r conftest* confdefs.h + +$as_echo "/* confdefs.h */" > confdefs.h + +# Predefined preprocessor variables. + +cat >>confdefs.h <<_ACEOF +@%:@define PACKAGE_NAME "$PACKAGE_NAME" +_ACEOF + +cat >>confdefs.h <<_ACEOF +@%:@define PACKAGE_TARNAME "$PACKAGE_TARNAME" +_ACEOF + +cat >>confdefs.h <<_ACEOF +@%:@define PACKAGE_VERSION "$PACKAGE_VERSION" +_ACEOF + +cat >>confdefs.h <<_ACEOF +@%:@define PACKAGE_STRING "$PACKAGE_STRING" +_ACEOF + +cat >>confdefs.h <<_ACEOF +@%:@define PACKAGE_BUGREPORT "$PACKAGE_BUGREPORT" +_ACEOF + +cat >>confdefs.h <<_ACEOF +@%:@define PACKAGE_URL "$PACKAGE_URL" +_ACEOF + + +# Let the site file select an alternate cache file if it wants to. +# Prefer an explicitly selected file to automatically selected ones. +ac_site_file1=NONE +ac_site_file2=NONE +if test -n "$CONFIG_SITE"; then + # We do not want a PATH search for config.site. + case $CONFIG_SITE in @%:@(( + -*) ac_site_file1=./$CONFIG_SITE;; + */*) ac_site_file1=$CONFIG_SITE;; + *) ac_site_file1=./$CONFIG_SITE;; + esac +elif test "x$prefix" != xNONE; then + ac_site_file1=$prefix/share/config.site + ac_site_file2=$prefix/etc/config.site +else + ac_site_file1=$ac_default_prefix/share/config.site + ac_site_file2=$ac_default_prefix/etc/config.site +fi +for ac_site_file in "$ac_site_file1" "$ac_site_file2" +do + test "x$ac_site_file" = xNONE && continue + if test /dev/null != "$ac_site_file" && test -r "$ac_site_file"; then + { $as_echo "$as_me:${as_lineno-$LINENO}: loading site script $ac_site_file" >&5 +$as_echo "$as_me: loading site script $ac_site_file" >&6;} + sed 's/^/| /' "$ac_site_file" >&5 + . "$ac_site_file" \ + || { { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5 +$as_echo "$as_me: error: in \`$ac_pwd':" >&2;} +as_fn_error $? "failed to load site script $ac_site_file +See \`config.log' for more details" "$LINENO" 5; } + fi +done + +if test -r "$cache_file"; then + # Some versions of bash will fail to source /dev/null (special files + # actually), so we avoid doing that. DJGPP emulates it as a regular file. + if test /dev/null != "$cache_file" && test -f "$cache_file"; then + { $as_echo "$as_me:${as_lineno-$LINENO}: loading cache $cache_file" >&5 +$as_echo "$as_me: loading cache $cache_file" >&6;} + case $cache_file in + [\\/]* | ?:[\\/]* ) . "$cache_file";; + *) . "./$cache_file";; + esac + fi +else + { $as_echo "$as_me:${as_lineno-$LINENO}: creating cache $cache_file" >&5 +$as_echo "$as_me: creating cache $cache_file" >&6;} + >$cache_file +fi + +# Check that the precious variables saved in the cache have kept the same +# value. +ac_cache_corrupted=false +for ac_var in $ac_precious_vars; do + eval ac_old_set=\$ac_cv_env_${ac_var}_set + eval ac_new_set=\$ac_env_${ac_var}_set + eval ac_old_val=\$ac_cv_env_${ac_var}_value + eval ac_new_val=\$ac_env_${ac_var}_value + case $ac_old_set,$ac_new_set in + set,) + { $as_echo "$as_me:${as_lineno-$LINENO}: error: \`$ac_var' was set to \`$ac_old_val' in the previous run" >&5 +$as_echo "$as_me: error: \`$ac_var' was set to \`$ac_old_val' in the previous run" >&2;} + ac_cache_corrupted=: ;; + ,set) + { $as_echo "$as_me:${as_lineno-$LINENO}: error: \`$ac_var' was not set in the previous run" >&5 +$as_echo "$as_me: error: \`$ac_var' was not set in the previous run" >&2;} + ac_cache_corrupted=: ;; + ,);; + *) + if test "x$ac_old_val" != "x$ac_new_val"; then + # differences in whitespace do not lead to failure. + ac_old_val_w=`echo x $ac_old_val` + ac_new_val_w=`echo x $ac_new_val` + if test "$ac_old_val_w" != "$ac_new_val_w"; then + { $as_echo "$as_me:${as_lineno-$LINENO}: error: \`$ac_var' has changed since the previous run:" >&5 +$as_echo "$as_me: error: \`$ac_var' has changed since the previous run:" >&2;} + ac_cache_corrupted=: + else + { $as_echo "$as_me:${as_lineno-$LINENO}: warning: ignoring whitespace changes in \`$ac_var' since the previous run:" >&5 +$as_echo "$as_me: warning: ignoring whitespace changes in \`$ac_var' since the previous run:" >&2;} + eval $ac_var=\$ac_old_val + fi + { $as_echo "$as_me:${as_lineno-$LINENO}: former value: \`$ac_old_val'" >&5 +$as_echo "$as_me: former value: \`$ac_old_val'" >&2;} + { $as_echo "$as_me:${as_lineno-$LINENO}: current value: \`$ac_new_val'" >&5 +$as_echo "$as_me: current value: \`$ac_new_val'" >&2;} + fi;; + esac + # Pass precious variables to config.status. + if test "$ac_new_set" = set; then + case $ac_new_val in + *\'*) ac_arg=$ac_var=`$as_echo "$ac_new_val" | sed "s/'/'\\\\\\\\''/g"` ;; + *) ac_arg=$ac_var=$ac_new_val ;; + esac + case " $ac_configure_args " in + *" '$ac_arg' "*) ;; # Avoid dups. Use of quotes ensures accuracy. + *) as_fn_append ac_configure_args " '$ac_arg'" ;; + esac + fi +done +if $ac_cache_corrupted; then + { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5 +$as_echo "$as_me: error: in \`$ac_pwd':" >&2;} + { $as_echo "$as_me:${as_lineno-$LINENO}: error: changes in the environment can compromise the build" >&5 +$as_echo "$as_me: error: changes in the environment can compromise the build" >&2;} + as_fn_error $? "run \`make distclean' and/or \`rm $cache_file' and start over" "$LINENO" 5 +fi +## -------------------- ## +## Main body of script. ## +## -------------------- ## + +ac_ext=c +ac_cpp='$CPP $CPPFLAGS' +ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5' +ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5' +ac_compiler_gnu=$ac_cv_c_compiler_gnu + + +am__api_version='1.14' + +ac_aux_dir= +for ac_dir in "$srcdir" "$srcdir/.." "$srcdir/../.."; do + if test -f "$ac_dir/install-sh"; then + ac_aux_dir=$ac_dir + ac_install_sh="$ac_aux_dir/install-sh -c" + break + elif test -f "$ac_dir/install.sh"; then + ac_aux_dir=$ac_dir + ac_install_sh="$ac_aux_dir/install.sh -c" + break + elif test -f "$ac_dir/shtool"; then + ac_aux_dir=$ac_dir + ac_install_sh="$ac_aux_dir/shtool install -c" + break + fi +done +if test -z "$ac_aux_dir"; then + as_fn_error $? "cannot find install-sh, install.sh, or shtool in \"$srcdir\" \"$srcdir/..\" \"$srcdir/../..\"" "$LINENO" 5 +fi + +# These three variables are undocumented and unsupported, +# and are intended to be withdrawn in a future Autoconf release. +# They can cause serious problems if a builder's source tree is in a directory +# whose full name contains unusual characters. +ac_config_guess="$SHELL $ac_aux_dir/config.guess" # Please don't use this var. +ac_config_sub="$SHELL $ac_aux_dir/config.sub" # Please don't use this var. +ac_configure="$SHELL $ac_aux_dir/configure" # Please don't use this var. + + +# Find a good install program. We prefer a C program (faster), +# so one script is as good as another. But avoid the broken or +# incompatible versions: +# SysV /etc/install, /usr/sbin/install +# SunOS /usr/etc/install +# IRIX /sbin/install +# AIX /bin/install +# AmigaOS /C/install, which installs bootblocks on floppy discs +# AIX 4 /usr/bin/installbsd, which doesn't work without a -g flag +# AFS /usr/afsws/bin/install, which mishandles nonexistent args +# SVR4 /usr/ucb/install, which tries to use the nonexistent group "staff" +# OS/2's system install, which has a completely different semantic +# ./install, which can be erroneously created by make from ./install.sh. +# Reject install programs that cannot install multiple files. +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for a BSD-compatible install" >&5 +$as_echo_n "checking for a BSD-compatible install... " >&6; } +if test -z "$INSTALL"; then +if ${ac_cv_path_install+:} false; then : + $as_echo_n "(cached) " >&6 +else + as_save_IFS=$IFS; IFS=$PATH_SEPARATOR +for as_dir in $PATH +do + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. + # Account for people who put trailing slashes in PATH elements. +case $as_dir/ in @%:@(( + ./ | .// | /[cC]/* | \ + /etc/* | /usr/sbin/* | /usr/etc/* | /sbin/* | /usr/afsws/bin/* | \ + ?:[\\/]os2[\\/]install[\\/]* | ?:[\\/]OS2[\\/]INSTALL[\\/]* | \ + /usr/ucb/* ) ;; + *) + # OSF1 and SCO ODT 3.0 have their own names for install. + # Don't use installbsd from OSF since it installs stuff as root + # by default. + for ac_prog in ginstall scoinst install; do + for ac_exec_ext in '' $ac_executable_extensions; do + if as_fn_executable_p "$as_dir/$ac_prog$ac_exec_ext"; then + if test $ac_prog = install && + grep dspmsg "$as_dir/$ac_prog$ac_exec_ext" >/dev/null 2>&1; then + # AIX install. It has an incompatible calling convention. + : + elif test $ac_prog = install && + grep pwplus "$as_dir/$ac_prog$ac_exec_ext" >/dev/null 2>&1; then + # program-specific install script used by HP pwplus--don't use. + : + else + rm -rf conftest.one conftest.two conftest.dir + echo one > conftest.one + echo two > conftest.two + mkdir conftest.dir + if "$as_dir/$ac_prog$ac_exec_ext" -c conftest.one conftest.two "`pwd`/conftest.dir" && + test -s conftest.one && test -s conftest.two && + test -s conftest.dir/conftest.one && + test -s conftest.dir/conftest.two + then + ac_cv_path_install="$as_dir/$ac_prog$ac_exec_ext -c" + break 3 + fi + fi + fi + done + done + ;; +esac + + done +IFS=$as_save_IFS + +rm -rf conftest.one conftest.two conftest.dir + +fi + if test "${ac_cv_path_install+set}" = set; then + INSTALL=$ac_cv_path_install + else + # As a last resort, use the slow shell script. Don't cache a + # value for INSTALL within a source directory, because that will + # break other packages using the cache if that directory is + # removed, or if the value is a relative name. + INSTALL=$ac_install_sh + fi +fi +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $INSTALL" >&5 +$as_echo "$INSTALL" >&6; } + +# Use test -z because SunOS4 sh mishandles braces in ${var-val}. +# It thinks the first close brace ends the variable substitution. +test -z "$INSTALL_PROGRAM" && INSTALL_PROGRAM='${INSTALL}' + +test -z "$INSTALL_SCRIPT" && INSTALL_SCRIPT='${INSTALL}' + +test -z "$INSTALL_DATA" && INSTALL_DATA='${INSTALL} -m 644' + +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether build environment is sane" >&5 +$as_echo_n "checking whether build environment is sane... " >&6; } +# Reject unsafe characters in $srcdir or the absolute working directory +# name. Accept space and tab only in the latter. +am_lf=' +' +case `pwd` in + *[\\\"\#\$\&\'\`$am_lf]*) + as_fn_error $? "unsafe absolute working directory name" "$LINENO" 5;; +esac +case $srcdir in + *[\\\"\#\$\&\'\`$am_lf\ \ ]*) + as_fn_error $? "unsafe srcdir value: '$srcdir'" "$LINENO" 5;; +esac + +# Do 'set' in a subshell so we don't clobber the current shell's +# arguments. Must try -L first in case configure is actually a +# symlink; some systems play weird games with the mod time of symlinks +# (eg FreeBSD returns the mod time of the symlink's containing +# directory). +if ( + am_has_slept=no + for am_try in 1 2; do + echo "timestamp, slept: $am_has_slept" > conftest.file + set X `ls -Lt "$srcdir/configure" conftest.file 2> /dev/null` + if test "$*" = "X"; then + # -L didn't work. + set X `ls -t "$srcdir/configure" conftest.file` + fi + if test "$*" != "X $srcdir/configure conftest.file" \ + && test "$*" != "X conftest.file $srcdir/configure"; then + + # If neither matched, then we have a broken ls. This can happen + # if, for instance, CONFIG_SHELL is bash and it inherits a + # broken ls alias from the environment. This has actually + # happened. Such a system could not be considered "sane". + as_fn_error $? "ls -t appears to fail. Make sure there is not a broken + alias in your environment" "$LINENO" 5 + fi + if test "$2" = conftest.file || test $am_try -eq 2; then + break + fi + # Just in case. + sleep 1 + am_has_slept=yes + done + test "$2" = conftest.file + ) +then + # Ok. + : +else + as_fn_error $? "newly created file is older than distributed files! +Check your system clock" "$LINENO" 5 +fi +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: yes" >&5 +$as_echo "yes" >&6; } +# If we didn't sleep, we still need to ensure time stamps of config.status and +# generated files are strictly newer. +am_sleep_pid= +if grep 'slept: no' conftest.file >/dev/null 2>&1; then + ( sleep 1 ) & + am_sleep_pid=$! +fi + +rm -f conftest.file + +test "$program_prefix" != NONE && + program_transform_name="s&^&$program_prefix&;$program_transform_name" +# Use a double $ so make ignores it. +test "$program_suffix" != NONE && + program_transform_name="s&\$&$program_suffix&;$program_transform_name" +# Double any \ or $. +# By default was `s,x,x', remove it if useless. +ac_script='s/[\\$]/&&/g;s/;s,x,x,$//' +program_transform_name=`$as_echo "$program_transform_name" | sed "$ac_script"` + +# expand $ac_aux_dir to an absolute path +am_aux_dir=`cd $ac_aux_dir && pwd` + +if test x"${MISSING+set}" != xset; then + case $am_aux_dir in + *\ * | *\ *) + MISSING="\${SHELL} \"$am_aux_dir/missing\"" ;; + *) + MISSING="\${SHELL} $am_aux_dir/missing" ;; + esac +fi +# Use eval to expand $SHELL +if eval "$MISSING --is-lightweight"; then + am_missing_run="$MISSING " +else + am_missing_run= + { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: 'missing' script is too old or missing" >&5 +$as_echo "$as_me: WARNING: 'missing' script is too old or missing" >&2;} +fi + +if test x"${install_sh}" != xset; then + case $am_aux_dir in + *\ * | *\ *) + install_sh="\${SHELL} '$am_aux_dir/install-sh'" ;; + *) + install_sh="\${SHELL} $am_aux_dir/install-sh" + esac +fi + +# Installed binaries are usually stripped using 'strip' when the user +# run "make install-strip". However 'strip' might not be the right +# tool to use in cross-compilation environments, therefore Automake +# will honor the 'STRIP' environment variable to overrule this program. +if test "$cross_compiling" != no; then + if test -n "$ac_tool_prefix"; then + # Extract the first word of "${ac_tool_prefix}strip", so it can be a program name with args. +set dummy ${ac_tool_prefix}strip; ac_word=$2 +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 +$as_echo_n "checking for $ac_word... " >&6; } +if ${ac_cv_prog_STRIP+:} false; then : + $as_echo_n "(cached) " >&6 +else + if test -n "$STRIP"; then + ac_cv_prog_STRIP="$STRIP" # Let the user override the test. +else +as_save_IFS=$IFS; IFS=$PATH_SEPARATOR +for as_dir in $PATH +do + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. + for ac_exec_ext in '' $ac_executable_extensions; do + if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then + ac_cv_prog_STRIP="${ac_tool_prefix}strip" + $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 + break 2 + fi +done + done +IFS=$as_save_IFS + +fi +fi +STRIP=$ac_cv_prog_STRIP +if test -n "$STRIP"; then + { $as_echo "$as_me:${as_lineno-$LINENO}: result: $STRIP" >&5 +$as_echo "$STRIP" >&6; } +else + { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 +$as_echo "no" >&6; } +fi + + +fi +if test -z "$ac_cv_prog_STRIP"; then + ac_ct_STRIP=$STRIP + # Extract the first word of "strip", so it can be a program name with args. +set dummy strip; ac_word=$2 +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 +$as_echo_n "checking for $ac_word... " >&6; } +if ${ac_cv_prog_ac_ct_STRIP+:} false; then : + $as_echo_n "(cached) " >&6 +else + if test -n "$ac_ct_STRIP"; then + ac_cv_prog_ac_ct_STRIP="$ac_ct_STRIP" # Let the user override the test. +else +as_save_IFS=$IFS; IFS=$PATH_SEPARATOR +for as_dir in $PATH +do + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. + for ac_exec_ext in '' $ac_executable_extensions; do + if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then + ac_cv_prog_ac_ct_STRIP="strip" + $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 + break 2 + fi +done + done +IFS=$as_save_IFS + +fi +fi +ac_ct_STRIP=$ac_cv_prog_ac_ct_STRIP +if test -n "$ac_ct_STRIP"; then + { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_ct_STRIP" >&5 +$as_echo "$ac_ct_STRIP" >&6; } +else + { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 +$as_echo "no" >&6; } +fi + + if test "x$ac_ct_STRIP" = x; then + STRIP=":" + else + case $cross_compiling:$ac_tool_warned in +yes:) +{ $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5 +$as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;} +ac_tool_warned=yes ;; +esac + STRIP=$ac_ct_STRIP + fi +else + STRIP="$ac_cv_prog_STRIP" +fi + +fi +INSTALL_STRIP_PROGRAM="\$(install_sh) -c -s" + +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for a thread-safe mkdir -p" >&5 +$as_echo_n "checking for a thread-safe mkdir -p... " >&6; } +if test -z "$MKDIR_P"; then + if ${ac_cv_path_mkdir+:} false; then : + $as_echo_n "(cached) " >&6 +else + as_save_IFS=$IFS; IFS=$PATH_SEPARATOR +for as_dir in $PATH$PATH_SEPARATOR/opt/sfw/bin +do + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. + for ac_prog in mkdir gmkdir; do + for ac_exec_ext in '' $ac_executable_extensions; do + as_fn_executable_p "$as_dir/$ac_prog$ac_exec_ext" || continue + case `"$as_dir/$ac_prog$ac_exec_ext" --version 2>&1` in #( + 'mkdir (GNU coreutils) '* | \ + 'mkdir (coreutils) '* | \ + 'mkdir (fileutils) '4.1*) + ac_cv_path_mkdir=$as_dir/$ac_prog$ac_exec_ext + break 3;; + esac + done + done + done +IFS=$as_save_IFS + +fi + + test -d ./--version && rmdir ./--version + if test "${ac_cv_path_mkdir+set}" = set; then + MKDIR_P="$ac_cv_path_mkdir -p" + else + # As a last resort, use the slow shell script. Don't cache a + # value for MKDIR_P within a source directory, because that will + # break other packages using the cache if that directory is + # removed, or if the value is a relative name. + MKDIR_P="$ac_install_sh -d" + fi +fi +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $MKDIR_P" >&5 +$as_echo "$MKDIR_P" >&6; } + +for ac_prog in gawk mawk nawk awk +do + # Extract the first word of "$ac_prog", so it can be a program name with args. +set dummy $ac_prog; ac_word=$2 +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 +$as_echo_n "checking for $ac_word... " >&6; } +if ${ac_cv_prog_AWK+:} false; then : + $as_echo_n "(cached) " >&6 +else + if test -n "$AWK"; then + ac_cv_prog_AWK="$AWK" # Let the user override the test. +else +as_save_IFS=$IFS; IFS=$PATH_SEPARATOR +for as_dir in $PATH +do + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. + for ac_exec_ext in '' $ac_executable_extensions; do + if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then + ac_cv_prog_AWK="$ac_prog" + $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 + break 2 + fi +done + done +IFS=$as_save_IFS + +fi +fi +AWK=$ac_cv_prog_AWK +if test -n "$AWK"; then + { $as_echo "$as_me:${as_lineno-$LINENO}: result: $AWK" >&5 +$as_echo "$AWK" >&6; } +else + { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 +$as_echo "no" >&6; } +fi + + + test -n "$AWK" && break +done + +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether ${MAKE-make} sets \$(MAKE)" >&5 +$as_echo_n "checking whether ${MAKE-make} sets \$(MAKE)... " >&6; } +set x ${MAKE-make} +ac_make=`$as_echo "$2" | sed 's/+/p/g; s/[^a-zA-Z0-9_]/_/g'` +if eval \${ac_cv_prog_make_${ac_make}_set+:} false; then : + $as_echo_n "(cached) " >&6 +else + cat >conftest.make <<\_ACEOF +SHELL = /bin/sh +all: + @echo '@@@%%%=$(MAKE)=@@@%%%' +_ACEOF +# GNU make sometimes prints "make[1]: Entering ...", which would confuse us. +case `${MAKE-make} -f conftest.make 2>/dev/null` in + *@@@%%%=?*=@@@%%%*) + eval ac_cv_prog_make_${ac_make}_set=yes;; + *) + eval ac_cv_prog_make_${ac_make}_set=no;; +esac +rm -f conftest.make +fi +if eval test \$ac_cv_prog_make_${ac_make}_set = yes; then + { $as_echo "$as_me:${as_lineno-$LINENO}: result: yes" >&5 +$as_echo "yes" >&6; } + SET_MAKE= +else + { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 +$as_echo "no" >&6; } + SET_MAKE="MAKE=${MAKE-make}" +fi + +rm -rf .tst 2>/dev/null +mkdir .tst 2>/dev/null +if test -d .tst; then + am__leading_dot=. +else + am__leading_dot=_ +fi +rmdir .tst 2>/dev/null + +@%:@ Check whether --enable-silent-rules was given. +if test "${enable_silent_rules+set}" = set; then : + enableval=$enable_silent_rules; +fi + +case $enable_silent_rules in @%:@ ((( + yes) AM_DEFAULT_VERBOSITY=0;; + no) AM_DEFAULT_VERBOSITY=1;; + *) AM_DEFAULT_VERBOSITY=1;; +esac +am_make=${MAKE-make} +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether $am_make supports nested variables" >&5 +$as_echo_n "checking whether $am_make supports nested variables... " >&6; } +if ${am_cv_make_support_nested_variables+:} false; then : + $as_echo_n "(cached) " >&6 +else + if $as_echo 'TRUE=$(BAR$(V)) +BAR0=false +BAR1=true +V=1 +am__doit: + @$(TRUE) +.PHONY: am__doit' | $am_make -f - >/dev/null 2>&1; then + am_cv_make_support_nested_variables=yes +else + am_cv_make_support_nested_variables=no +fi +fi +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $am_cv_make_support_nested_variables" >&5 +$as_echo "$am_cv_make_support_nested_variables" >&6; } +if test $am_cv_make_support_nested_variables = yes; then + AM_V='$(V)' + AM_DEFAULT_V='$(AM_DEFAULT_VERBOSITY)' +else + AM_V=$AM_DEFAULT_VERBOSITY + AM_DEFAULT_V=$AM_DEFAULT_VERBOSITY +fi +AM_BACKSLASH='\' + +if test "`cd $srcdir && pwd`" != "`pwd`"; then + # Use -I$(srcdir) only when $(srcdir) != ., so that make's output + # is not polluted with repeated "-I." + am__isrc=' -I$(srcdir)' + # test to see if srcdir already configured + if test -f $srcdir/config.status; then + as_fn_error $? "source directory already configured; run \"make distclean\" there first" "$LINENO" 5 + fi +fi + +# test whether we have cygpath +if test -z "$CYGPATH_W"; then + if (cygpath --version) >/dev/null 2>/dev/null; then + CYGPATH_W='cygpath -w' + else + CYGPATH_W=echo + fi +fi + + +# Define the identity of the package. + PACKAGE='autohello' + VERSION='1.1' + + +cat >>confdefs.h <<_ACEOF +@%:@define PACKAGE "$PACKAGE" +_ACEOF + + +cat >>confdefs.h <<_ACEOF +@%:@define VERSION "$VERSION" +_ACEOF + +# Some tools Automake needs. + +ACLOCAL=${ACLOCAL-"${am_missing_run}aclocal-${am__api_version}"} + + +AUTOCONF=${AUTOCONF-"${am_missing_run}autoconf"} + + +AUTOMAKE=${AUTOMAKE-"${am_missing_run}automake-${am__api_version}"} + + +AUTOHEADER=${AUTOHEADER-"${am_missing_run}autoheader"} + + +MAKEINFO=${MAKEINFO-"${am_missing_run}makeinfo"} + +# For better backward compatibility. To be removed once Automake 1.9.x +# dies out for good. For more background, see: +# +# +mkdir_p='$(MKDIR_P)' + +# We need awk for the "check" target. The system "awk" is bad on +# some platforms. +# Always define AMTAR for backward compatibility. Yes, it's still used +# in the wild :-( We should find a proper way to deprecate it ... +AMTAR='$${TAR-tar}' + + +# We'll loop over all known methods to create a tar archive until one works. +_am_tools='gnutar pax cpio none' + +am__tar='$${TAR-tar} chof - "$$tardir"' am__untar='$${TAR-tar} xf -' + + + + + + +# POSIX will say in a future version that running "rm -f" with no argument +# is OK; and we want to be able to make that assumption in our Makefile +# recipes. So use an aggressive probe to check that the usage we want is +# actually supported "in the wild" to an acceptable degree. +# See automake bug#10828. +# To make any issue more visible, cause the running configure to be aborted +# by default if the 'rm' program in use doesn't match our expectations; the +# user can still override this though. +if rm -f && rm -fr && rm -rf; then : OK; else + cat >&2 <<'END' +Oops! + +Your 'rm' program seems unable to run without file operands specified +on the command line, even when the '-f' option is present. This is contrary +to the behaviour of most rm programs out there, and not conforming with +the upcoming POSIX standard: + +Please tell bug-automake@gnu.org about your system, including the value +of your $PATH and any error possibly output before this message. This +can help us improve future automake versions. + +END + if test x"$ACCEPT_INFERIOR_RM_PROGRAM" = x"yes"; then + echo 'Configuration will proceed anyway, since you have set the' >&2 + echo 'ACCEPT_INFERIOR_RM_PROGRAM variable to "yes"' >&2 + echo >&2 + else + cat >&2 <<'END' +Aborting the configuration process, to ensure you take notice of the issue. + +You can download and install GNU coreutils to get an 'rm' implementation +that behaves properly: . + +If you want to complete the configuration process using your problematic +'rm' anyway, export the environment variable ACCEPT_INFERIOR_RM_PROGRAM +to "yes", and re-run configure. + +END + as_fn_error $? "Your 'rm' program is bad, sorry." "$LINENO" 5 + fi +fi + + +ac_config_headers="$ac_config_headers config.h" + + +# Checks for programs. +ac_ext=c +ac_cpp='$CPP $CPPFLAGS' +ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5' +ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5' +ac_compiler_gnu=$ac_cv_c_compiler_gnu +if test -n "$ac_tool_prefix"; then + # Extract the first word of "${ac_tool_prefix}gcc", so it can be a program name with args. +set dummy ${ac_tool_prefix}gcc; ac_word=$2 +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 +$as_echo_n "checking for $ac_word... " >&6; } +if ${ac_cv_prog_CC+:} false; then : + $as_echo_n "(cached) " >&6 +else + if test -n "$CC"; then + ac_cv_prog_CC="$CC" # Let the user override the test. +else +as_save_IFS=$IFS; IFS=$PATH_SEPARATOR +for as_dir in $PATH +do + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. + for ac_exec_ext in '' $ac_executable_extensions; do + if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then + ac_cv_prog_CC="${ac_tool_prefix}gcc" + $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 + break 2 + fi +done + done +IFS=$as_save_IFS + +fi +fi +CC=$ac_cv_prog_CC +if test -n "$CC"; then + { $as_echo "$as_me:${as_lineno-$LINENO}: result: $CC" >&5 +$as_echo "$CC" >&6; } +else + { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 +$as_echo "no" >&6; } +fi + + +fi +if test -z "$ac_cv_prog_CC"; then + ac_ct_CC=$CC + # Extract the first word of "gcc", so it can be a program name with args. +set dummy gcc; ac_word=$2 +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 +$as_echo_n "checking for $ac_word... " >&6; } +if ${ac_cv_prog_ac_ct_CC+:} false; then : + $as_echo_n "(cached) " >&6 +else + if test -n "$ac_ct_CC"; then + ac_cv_prog_ac_ct_CC="$ac_ct_CC" # Let the user override the test. +else +as_save_IFS=$IFS; IFS=$PATH_SEPARATOR +for as_dir in $PATH +do + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. + for ac_exec_ext in '' $ac_executable_extensions; do + if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then + ac_cv_prog_ac_ct_CC="gcc" + $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 + break 2 + fi +done + done +IFS=$as_save_IFS + +fi +fi +ac_ct_CC=$ac_cv_prog_ac_ct_CC +if test -n "$ac_ct_CC"; then + { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_ct_CC" >&5 +$as_echo "$ac_ct_CC" >&6; } +else + { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 +$as_echo "no" >&6; } +fi + + if test "x$ac_ct_CC" = x; then + CC="" + else + case $cross_compiling:$ac_tool_warned in +yes:) +{ $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5 +$as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;} +ac_tool_warned=yes ;; +esac + CC=$ac_ct_CC + fi +else + CC="$ac_cv_prog_CC" +fi + +if test -z "$CC"; then + if test -n "$ac_tool_prefix"; then + # Extract the first word of "${ac_tool_prefix}cc", so it can be a program name with args. +set dummy ${ac_tool_prefix}cc; ac_word=$2 +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 +$as_echo_n "checking for $ac_word... " >&6; } +if ${ac_cv_prog_CC+:} false; then : + $as_echo_n "(cached) " >&6 +else + if test -n "$CC"; then + ac_cv_prog_CC="$CC" # Let the user override the test. +else +as_save_IFS=$IFS; IFS=$PATH_SEPARATOR +for as_dir in $PATH +do + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. + for ac_exec_ext in '' $ac_executable_extensions; do + if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then + ac_cv_prog_CC="${ac_tool_prefix}cc" + $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 + break 2 + fi +done + done +IFS=$as_save_IFS + +fi +fi +CC=$ac_cv_prog_CC +if test -n "$CC"; then + { $as_echo "$as_me:${as_lineno-$LINENO}: result: $CC" >&5 +$as_echo "$CC" >&6; } +else + { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 +$as_echo "no" >&6; } +fi + + + fi +fi +if test -z "$CC"; then + # Extract the first word of "cc", so it can be a program name with args. +set dummy cc; ac_word=$2 +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 +$as_echo_n "checking for $ac_word... " >&6; } +if ${ac_cv_prog_CC+:} false; then : + $as_echo_n "(cached) " >&6 +else + if test -n "$CC"; then + ac_cv_prog_CC="$CC" # Let the user override the test. +else + ac_prog_rejected=no +as_save_IFS=$IFS; IFS=$PATH_SEPARATOR +for as_dir in $PATH +do + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. + for ac_exec_ext in '' $ac_executable_extensions; do + if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then + if test "$as_dir/$ac_word$ac_exec_ext" = "/usr/ucb/cc"; then + ac_prog_rejected=yes + continue + fi + ac_cv_prog_CC="cc" + $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 + break 2 + fi +done + done +IFS=$as_save_IFS + +if test $ac_prog_rejected = yes; then + # We found a bogon in the path, so make sure we never use it. + set dummy $ac_cv_prog_CC + shift + if test $@%:@ != 0; then + # We chose a different compiler from the bogus one. + # However, it has the same basename, so the bogon will be chosen + # first if we set CC to just the basename; use the full file name. + shift + ac_cv_prog_CC="$as_dir/$ac_word${1+' '}$@" + fi +fi +fi +fi +CC=$ac_cv_prog_CC +if test -n "$CC"; then + { $as_echo "$as_me:${as_lineno-$LINENO}: result: $CC" >&5 +$as_echo "$CC" >&6; } +else + { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 +$as_echo "no" >&6; } +fi + + +fi +if test -z "$CC"; then + if test -n "$ac_tool_prefix"; then + for ac_prog in cl.exe + do + # Extract the first word of "$ac_tool_prefix$ac_prog", so it can be a program name with args. +set dummy $ac_tool_prefix$ac_prog; ac_word=$2 +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 +$as_echo_n "checking for $ac_word... " >&6; } +if ${ac_cv_prog_CC+:} false; then : + $as_echo_n "(cached) " >&6 +else + if test -n "$CC"; then + ac_cv_prog_CC="$CC" # Let the user override the test. +else +as_save_IFS=$IFS; IFS=$PATH_SEPARATOR +for as_dir in $PATH +do + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. + for ac_exec_ext in '' $ac_executable_extensions; do + if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then + ac_cv_prog_CC="$ac_tool_prefix$ac_prog" + $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 + break 2 + fi +done + done +IFS=$as_save_IFS + +fi +fi +CC=$ac_cv_prog_CC +if test -n "$CC"; then + { $as_echo "$as_me:${as_lineno-$LINENO}: result: $CC" >&5 +$as_echo "$CC" >&6; } +else + { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 +$as_echo "no" >&6; } +fi + + + test -n "$CC" && break + done +fi +if test -z "$CC"; then + ac_ct_CC=$CC + for ac_prog in cl.exe +do + # Extract the first word of "$ac_prog", so it can be a program name with args. +set dummy $ac_prog; ac_word=$2 +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 +$as_echo_n "checking for $ac_word... " >&6; } +if ${ac_cv_prog_ac_ct_CC+:} false; then : + $as_echo_n "(cached) " >&6 +else + if test -n "$ac_ct_CC"; then + ac_cv_prog_ac_ct_CC="$ac_ct_CC" # Let the user override the test. +else +as_save_IFS=$IFS; IFS=$PATH_SEPARATOR +for as_dir in $PATH +do + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. + for ac_exec_ext in '' $ac_executable_extensions; do + if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then + ac_cv_prog_ac_ct_CC="$ac_prog" + $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 + break 2 + fi +done + done +IFS=$as_save_IFS + +fi +fi +ac_ct_CC=$ac_cv_prog_ac_ct_CC +if test -n "$ac_ct_CC"; then + { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_ct_CC" >&5 +$as_echo "$ac_ct_CC" >&6; } +else + { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 +$as_echo "no" >&6; } +fi + + + test -n "$ac_ct_CC" && break +done + + if test "x$ac_ct_CC" = x; then + CC="" + else + case $cross_compiling:$ac_tool_warned in +yes:) +{ $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5 +$as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;} +ac_tool_warned=yes ;; +esac + CC=$ac_ct_CC + fi +fi + +fi + + +test -z "$CC" && { { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5 +$as_echo "$as_me: error: in \`$ac_pwd':" >&2;} +as_fn_error $? "no acceptable C compiler found in \$PATH +See \`config.log' for more details" "$LINENO" 5; } + +# Provide some information about the compiler. +$as_echo "$as_me:${as_lineno-$LINENO}: checking for C compiler version" >&5 +set X $ac_compile +ac_compiler=$2 +for ac_option in --version -v -V -qversion; do + { { ac_try="$ac_compiler $ac_option >&5" +case "(($ac_try" in + *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; + *) ac_try_echo=$ac_try;; +esac +eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\"" +$as_echo "$ac_try_echo"; } >&5 + (eval "$ac_compiler $ac_option >&5") 2>conftest.err + ac_status=$? + if test -s conftest.err; then + sed '10a\ +... rest of stderr output deleted ... + 10q' conftest.err >conftest.er1 + cat conftest.er1 >&5 + fi + rm -f conftest.er1 conftest.err + $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 + test $ac_status = 0; } +done + +cat confdefs.h - <<_ACEOF >conftest.$ac_ext +/* end confdefs.h. */ + +int +main () +{ + + ; + return 0; +} +_ACEOF +ac_clean_files_save=$ac_clean_files +ac_clean_files="$ac_clean_files a.out a.out.dSYM a.exe b.out" +# Try to create an executable without -o first, disregard a.out. +# It will help us diagnose broken compilers, and finding out an intuition +# of exeext. +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether the C compiler works" >&5 +$as_echo_n "checking whether the C compiler works... " >&6; } +ac_link_default=`$as_echo "$ac_link" | sed 's/ -o *conftest[^ ]*//'` + +# The possible output files: +ac_files="a.out conftest.exe conftest a.exe a_out.exe b.out conftest.*" + +ac_rmfiles= +for ac_file in $ac_files +do + case $ac_file in + *.$ac_ext | *.xcoff | *.tds | *.d | *.pdb | *.xSYM | *.bb | *.bbg | *.map | *.inf | *.dSYM | *.o | *.obj ) ;; + * ) ac_rmfiles="$ac_rmfiles $ac_file";; + esac +done +rm -f $ac_rmfiles + +if { { ac_try="$ac_link_default" +case "(($ac_try" in + *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; + *) ac_try_echo=$ac_try;; +esac +eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\"" +$as_echo "$ac_try_echo"; } >&5 + (eval "$ac_link_default") 2>&5 + ac_status=$? + $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 + test $ac_status = 0; }; then : + # Autoconf-2.13 could set the ac_cv_exeext variable to `no'. +# So ignore a value of `no', otherwise this would lead to `EXEEXT = no' +# in a Makefile. We should not override ac_cv_exeext if it was cached, +# so that the user can short-circuit this test for compilers unknown to +# Autoconf. +for ac_file in $ac_files '' +do + test -f "$ac_file" || continue + case $ac_file in + *.$ac_ext | *.xcoff | *.tds | *.d | *.pdb | *.xSYM | *.bb | *.bbg | *.map | *.inf | *.dSYM | *.o | *.obj ) + ;; + [ab].out ) + # We found the default executable, but exeext='' is most + # certainly right. + break;; + *.* ) + if test "${ac_cv_exeext+set}" = set && test "$ac_cv_exeext" != no; + then :; else + ac_cv_exeext=`expr "$ac_file" : '[^.]*\(\..*\)'` + fi + # We set ac_cv_exeext here because the later test for it is not + # safe: cross compilers may not add the suffix if given an `-o' + # argument, so we may need to know it at that point already. + # Even if this section looks crufty: it has the advantage of + # actually working. + break;; + * ) + break;; + esac +done +test "$ac_cv_exeext" = no && ac_cv_exeext= + +else + ac_file='' +fi +if test -z "$ac_file"; then : + { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 +$as_echo "no" >&6; } +$as_echo "$as_me: failed program was:" >&5 +sed 's/^/| /' conftest.$ac_ext >&5 + +{ { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5 +$as_echo "$as_me: error: in \`$ac_pwd':" >&2;} +as_fn_error 77 "C compiler cannot create executables +See \`config.log' for more details" "$LINENO" 5; } +else + { $as_echo "$as_me:${as_lineno-$LINENO}: result: yes" >&5 +$as_echo "yes" >&6; } +fi +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for C compiler default output file name" >&5 +$as_echo_n "checking for C compiler default output file name... " >&6; } +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_file" >&5 +$as_echo "$ac_file" >&6; } +ac_exeext=$ac_cv_exeext + +rm -f -r a.out a.out.dSYM a.exe conftest$ac_cv_exeext b.out +ac_clean_files=$ac_clean_files_save +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for suffix of executables" >&5 +$as_echo_n "checking for suffix of executables... " >&6; } +if { { ac_try="$ac_link" +case "(($ac_try" in + *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; + *) ac_try_echo=$ac_try;; +esac +eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\"" +$as_echo "$ac_try_echo"; } >&5 + (eval "$ac_link") 2>&5 + ac_status=$? + $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 + test $ac_status = 0; }; then : + # If both `conftest.exe' and `conftest' are `present' (well, observable) +# catch `conftest.exe'. For instance with Cygwin, `ls conftest' will +# work properly (i.e., refer to `conftest.exe'), while it won't with +# `rm'. +for ac_file in conftest.exe conftest conftest.*; do + test -f "$ac_file" || continue + case $ac_file in + *.$ac_ext | *.xcoff | *.tds | *.d | *.pdb | *.xSYM | *.bb | *.bbg | *.map | *.inf | *.dSYM | *.o | *.obj ) ;; + *.* ) ac_cv_exeext=`expr "$ac_file" : '[^.]*\(\..*\)'` + break;; + * ) break;; + esac +done +else + { { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5 +$as_echo "$as_me: error: in \`$ac_pwd':" >&2;} +as_fn_error $? "cannot compute suffix of executables: cannot compile and link +See \`config.log' for more details" "$LINENO" 5; } +fi +rm -f conftest conftest$ac_cv_exeext +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_exeext" >&5 +$as_echo "$ac_cv_exeext" >&6; } + +rm -f conftest.$ac_ext +EXEEXT=$ac_cv_exeext +ac_exeext=$EXEEXT +cat confdefs.h - <<_ACEOF >conftest.$ac_ext +/* end confdefs.h. */ +@%:@include +int +main () +{ +FILE *f = fopen ("conftest.out", "w"); + return ferror (f) || fclose (f) != 0; + + ; + return 0; +} +_ACEOF +ac_clean_files="$ac_clean_files conftest.out" +# Check that the compiler produces executables we can run. If not, either +# the compiler is broken, or we cross compile. +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether we are cross compiling" >&5 +$as_echo_n "checking whether we are cross compiling... " >&6; } +if test "$cross_compiling" != yes; then + { { ac_try="$ac_link" +case "(($ac_try" in + *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; + *) ac_try_echo=$ac_try;; +esac +eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\"" +$as_echo "$ac_try_echo"; } >&5 + (eval "$ac_link") 2>&5 + ac_status=$? + $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 + test $ac_status = 0; } + if { ac_try='./conftest$ac_cv_exeext' + { { case "(($ac_try" in + *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; + *) ac_try_echo=$ac_try;; +esac +eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\"" +$as_echo "$ac_try_echo"; } >&5 + (eval "$ac_try") 2>&5 + ac_status=$? + $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 + test $ac_status = 0; }; }; then + cross_compiling=no + else + if test "$cross_compiling" = maybe; then + cross_compiling=yes + else + { { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5 +$as_echo "$as_me: error: in \`$ac_pwd':" >&2;} +as_fn_error $? "cannot run C compiled programs. +If you meant to cross compile, use \`--host'. +See \`config.log' for more details" "$LINENO" 5; } + fi + fi +fi +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $cross_compiling" >&5 +$as_echo "$cross_compiling" >&6; } + +rm -f conftest.$ac_ext conftest$ac_cv_exeext conftest.out +ac_clean_files=$ac_clean_files_save +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for suffix of object files" >&5 +$as_echo_n "checking for suffix of object files... " >&6; } +if ${ac_cv_objext+:} false; then : + $as_echo_n "(cached) " >&6 +else + cat confdefs.h - <<_ACEOF >conftest.$ac_ext +/* end confdefs.h. */ + +int +main () +{ + + ; + return 0; +} +_ACEOF +rm -f conftest.o conftest.obj +if { { ac_try="$ac_compile" +case "(($ac_try" in + *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; + *) ac_try_echo=$ac_try;; +esac +eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\"" +$as_echo "$ac_try_echo"; } >&5 + (eval "$ac_compile") 2>&5 + ac_status=$? + $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 + test $ac_status = 0; }; then : + for ac_file in conftest.o conftest.obj conftest.*; do + test -f "$ac_file" || continue; + case $ac_file in + *.$ac_ext | *.xcoff | *.tds | *.d | *.pdb | *.xSYM | *.bb | *.bbg | *.map | *.inf | *.dSYM ) ;; + *) ac_cv_objext=`expr "$ac_file" : '.*\.\(.*\)'` + break;; + esac +done +else + $as_echo "$as_me: failed program was:" >&5 +sed 's/^/| /' conftest.$ac_ext >&5 + +{ { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5 +$as_echo "$as_me: error: in \`$ac_pwd':" >&2;} +as_fn_error $? "cannot compute suffix of object files: cannot compile +See \`config.log' for more details" "$LINENO" 5; } +fi +rm -f conftest.$ac_cv_objext conftest.$ac_ext +fi +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_objext" >&5 +$as_echo "$ac_cv_objext" >&6; } +OBJEXT=$ac_cv_objext +ac_objext=$OBJEXT +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether we are using the GNU C compiler" >&5 +$as_echo_n "checking whether we are using the GNU C compiler... " >&6; } +if ${ac_cv_c_compiler_gnu+:} false; then : + $as_echo_n "(cached) " >&6 +else + cat confdefs.h - <<_ACEOF >conftest.$ac_ext +/* end confdefs.h. */ + +int +main () +{ +#ifndef __GNUC__ + choke me +#endif + + ; + return 0; +} +_ACEOF +if ac_fn_c_try_compile "$LINENO"; then : + ac_compiler_gnu=yes +else + ac_compiler_gnu=no +fi +rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext +ac_cv_c_compiler_gnu=$ac_compiler_gnu + +fi +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_c_compiler_gnu" >&5 +$as_echo "$ac_cv_c_compiler_gnu" >&6; } +if test $ac_compiler_gnu = yes; then + GCC=yes +else + GCC= +fi +ac_test_CFLAGS=${CFLAGS+set} +ac_save_CFLAGS=$CFLAGS +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether $CC accepts -g" >&5 +$as_echo_n "checking whether $CC accepts -g... " >&6; } +if ${ac_cv_prog_cc_g+:} false; then : + $as_echo_n "(cached) " >&6 +else + ac_save_c_werror_flag=$ac_c_werror_flag + ac_c_werror_flag=yes + ac_cv_prog_cc_g=no + CFLAGS="-g" + cat confdefs.h - <<_ACEOF >conftest.$ac_ext +/* end confdefs.h. */ + +int +main () +{ + + ; + return 0; +} +_ACEOF +if ac_fn_c_try_compile "$LINENO"; then : + ac_cv_prog_cc_g=yes +else + CFLAGS="" + cat confdefs.h - <<_ACEOF >conftest.$ac_ext +/* end confdefs.h. */ + +int +main () +{ + + ; + return 0; +} +_ACEOF +if ac_fn_c_try_compile "$LINENO"; then : + +else + ac_c_werror_flag=$ac_save_c_werror_flag + CFLAGS="-g" + cat confdefs.h - <<_ACEOF >conftest.$ac_ext +/* end confdefs.h. */ + +int +main () +{ + + ; + return 0; +} +_ACEOF +if ac_fn_c_try_compile "$LINENO"; then : + ac_cv_prog_cc_g=yes +fi +rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext +fi +rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext +fi +rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext + ac_c_werror_flag=$ac_save_c_werror_flag +fi +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_prog_cc_g" >&5 +$as_echo "$ac_cv_prog_cc_g" >&6; } +if test "$ac_test_CFLAGS" = set; then + CFLAGS=$ac_save_CFLAGS +elif test $ac_cv_prog_cc_g = yes; then + if test "$GCC" = yes; then + CFLAGS="-g -O2" + else + CFLAGS="-g" + fi +else + if test "$GCC" = yes; then + CFLAGS="-O2" + else + CFLAGS= + fi +fi +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $CC option to accept ISO C89" >&5 +$as_echo_n "checking for $CC option to accept ISO C89... " >&6; } +if ${ac_cv_prog_cc_c89+:} false; then : + $as_echo_n "(cached) " >&6 +else + ac_cv_prog_cc_c89=no +ac_save_CC=$CC +cat confdefs.h - <<_ACEOF >conftest.$ac_ext +/* end confdefs.h. */ +#include +#include +struct stat; +/* Most of the following tests are stolen from RCS 5.7's src/conf.sh. */ +struct buf { int x; }; +FILE * (*rcsopen) (struct buf *, struct stat *, int); +static char *e (p, i) + char **p; + int i; +{ + return p[i]; +} +static char *f (char * (*g) (char **, int), char **p, ...) +{ + char *s; + va_list v; + va_start (v,p); + s = g (p, va_arg (v,int)); + va_end (v); + return s; +} + +/* OSF 4.0 Compaq cc is some sort of almost-ANSI by default. It has + function prototypes and stuff, but not '\xHH' hex character constants. + These don't provoke an error unfortunately, instead are silently treated + as 'x'. The following induces an error, until -std is added to get + proper ANSI mode. Curiously '\x00'!='x' always comes out true, for an + array size at least. It's necessary to write '\x00'==0 to get something + that's true only with -std. */ +int osf4_cc_array ['\x00' == 0 ? 1 : -1]; + +/* IBM C 6 for AIX is almost-ANSI by default, but it replaces macro parameters + inside strings and character constants. */ +#define FOO(x) 'x' +int xlc6_cc_array[FOO(a) == 'x' ? 1 : -1]; + +int test (int i, double x); +struct s1 {int (*f) (int a);}; +struct s2 {int (*f) (double a);}; +int pairnames (int, char **, FILE *(*)(struct buf *, struct stat *, int), int, int); +int argc; +char **argv; +int +main () +{ +return f (e, argv, 0) != argv[0] || f (e, argv, 1) != argv[1]; + ; + return 0; +} +_ACEOF +for ac_arg in '' -qlanglvl=extc89 -qlanglvl=ansi -std \ + -Ae "-Aa -D_HPUX_SOURCE" "-Xc -D__EXTENSIONS__" +do + CC="$ac_save_CC $ac_arg" + if ac_fn_c_try_compile "$LINENO"; then : + ac_cv_prog_cc_c89=$ac_arg +fi +rm -f core conftest.err conftest.$ac_objext + test "x$ac_cv_prog_cc_c89" != "xno" && break +done +rm -f conftest.$ac_ext +CC=$ac_save_CC + +fi +# AC_CACHE_VAL +case "x$ac_cv_prog_cc_c89" in + x) + { $as_echo "$as_me:${as_lineno-$LINENO}: result: none needed" >&5 +$as_echo "none needed" >&6; } ;; + xno) + { $as_echo "$as_me:${as_lineno-$LINENO}: result: unsupported" >&5 +$as_echo "unsupported" >&6; } ;; + *) + CC="$CC $ac_cv_prog_cc_c89" + { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_prog_cc_c89" >&5 +$as_echo "$ac_cv_prog_cc_c89" >&6; } ;; +esac +if test "x$ac_cv_prog_cc_c89" != xno; then : + +fi + +ac_ext=c +ac_cpp='$CPP $CPPFLAGS' +ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5' +ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5' +ac_compiler_gnu=$ac_cv_c_compiler_gnu + +ac_ext=c +ac_cpp='$CPP $CPPFLAGS' +ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5' +ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5' +ac_compiler_gnu=$ac_cv_c_compiler_gnu +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether $CC understands -c and -o together" >&5 +$as_echo_n "checking whether $CC understands -c and -o together... " >&6; } +if ${am_cv_prog_cc_c_o+:} false; then : + $as_echo_n "(cached) " >&6 +else + cat confdefs.h - <<_ACEOF >conftest.$ac_ext +/* end confdefs.h. */ + +int +main () +{ + + ; + return 0; +} +_ACEOF + # Make sure it works both with $CC and with simple cc. + # Following AC_PROG_CC_C_O, we do the test twice because some + # compilers refuse to overwrite an existing .o file with -o, + # though they will create one. + am_cv_prog_cc_c_o=yes + for am_i in 1 2; do + if { echo "$as_me:$LINENO: $CC -c conftest.$ac_ext -o conftest2.$ac_objext" >&5 + ($CC -c conftest.$ac_ext -o conftest2.$ac_objext) >&5 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } \ + && test -f conftest2.$ac_objext; then + : OK + else + am_cv_prog_cc_c_o=no + break + fi + done + rm -f core conftest* + unset am_i +fi +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $am_cv_prog_cc_c_o" >&5 +$as_echo "$am_cv_prog_cc_c_o" >&6; } +if test "$am_cv_prog_cc_c_o" != yes; then + # Losing compiler, so override with the script. + # FIXME: It is wrong to rewrite CC. + # But if we don't then we get into trouble of one sort or another. + # A longer-term fix would be to have automake use am__CC in this case, + # and then we could set am__CC="\$(top_srcdir)/compile \$(CC)" + CC="$am_aux_dir/compile $CC" +fi +ac_ext=c +ac_cpp='$CPP $CPPFLAGS' +ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5' +ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5' +ac_compiler_gnu=$ac_cv_c_compiler_gnu + +DEPDIR="${am__leading_dot}deps" + +ac_config_commands="$ac_config_commands depfiles" + + +am_make=${MAKE-make} +cat > confinc << 'END' +am__doit: + @echo this is the am__doit target +.PHONY: am__doit +END +# If we don't find an include directive, just comment out the code. +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for style of include used by $am_make" >&5 +$as_echo_n "checking for style of include used by $am_make... " >&6; } +am__include="#" +am__quote= +_am_result=none +# First try GNU make style include. +echo "include confinc" > confmf +# Ignore all kinds of additional output from 'make'. +case `$am_make -s -f confmf 2> /dev/null` in #( +*the\ am__doit\ target*) + am__include=include + am__quote= + _am_result=GNU + ;; +esac +# Now try BSD make style include. +if test "$am__include" = "#"; then + echo '.include "confinc"' > confmf + case `$am_make -s -f confmf 2> /dev/null` in #( + *the\ am__doit\ target*) + am__include=.include + am__quote="\"" + _am_result=BSD + ;; + esac +fi + + +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $_am_result" >&5 +$as_echo "$_am_result" >&6; } +rm -f confinc confmf + +@%:@ Check whether --enable-dependency-tracking was given. +if test "${enable_dependency_tracking+set}" = set; then : + enableval=$enable_dependency_tracking; +fi + +if test "x$enable_dependency_tracking" != xno; then + am_depcomp="$ac_aux_dir/depcomp" + AMDEPBACKSLASH='\' + am__nodep='_no' +fi + if test "x$enable_dependency_tracking" != xno; then + AMDEP_TRUE= + AMDEP_FALSE='#' +else + AMDEP_TRUE='#' + AMDEP_FALSE= +fi + + + +depcc="$CC" am_compiler_list= + +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking dependency style of $depcc" >&5 +$as_echo_n "checking dependency style of $depcc... " >&6; } +if ${am_cv_CC_dependencies_compiler_type+:} false; then : + $as_echo_n "(cached) " >&6 +else + if test -z "$AMDEP_TRUE" && test -f "$am_depcomp"; then + # We make a subdir and do the tests there. Otherwise we can end up + # making bogus files that we don't know about and never remove. For + # instance it was reported that on HP-UX the gcc test will end up + # making a dummy file named 'D' -- because '-MD' means "put the output + # in D". + rm -rf conftest.dir + mkdir conftest.dir + # Copy depcomp to subdir because otherwise we won't find it if we're + # using a relative directory. + cp "$am_depcomp" conftest.dir + cd conftest.dir + # We will build objects and dependencies in a subdirectory because + # it helps to detect inapplicable dependency modes. For instance + # both Tru64's cc and ICC support -MD to output dependencies as a + # side effect of compilation, but ICC will put the dependencies in + # the current directory while Tru64 will put them in the object + # directory. + mkdir sub + + am_cv_CC_dependencies_compiler_type=none + if test "$am_compiler_list" = ""; then + am_compiler_list=`sed -n 's/^#*\([a-zA-Z0-9]*\))$/\1/p' < ./depcomp` + fi + am__universal=false + case " $depcc " in #( + *\ -arch\ *\ -arch\ *) am__universal=true ;; + esac + + for depmode in $am_compiler_list; do + # Setup a source with many dependencies, because some compilers + # like to wrap large dependency lists on column 80 (with \), and + # we should not choose a depcomp mode which is confused by this. + # + # We need to recreate these files for each test, as the compiler may + # overwrite some of them when testing with obscure command lines. + # This happens at least with the AIX C compiler. + : > sub/conftest.c + for i in 1 2 3 4 5 6; do + echo '#include "conftst'$i'.h"' >> sub/conftest.c + # Using ": > sub/conftst$i.h" creates only sub/conftst1.h with + # Solaris 10 /bin/sh. + echo '/* dummy */' > sub/conftst$i.h + done + echo "${am__include} ${am__quote}sub/conftest.Po${am__quote}" > confmf + + # We check with '-c' and '-o' for the sake of the "dashmstdout" + # mode. It turns out that the SunPro C++ compiler does not properly + # handle '-M -o', and we need to detect this. Also, some Intel + # versions had trouble with output in subdirs. + am__obj=sub/conftest.${OBJEXT-o} + am__minus_obj="-o $am__obj" + case $depmode in + gcc) + # This depmode causes a compiler race in universal mode. + test "$am__universal" = false || continue + ;; + nosideeffect) + # After this tag, mechanisms are not by side-effect, so they'll + # only be used when explicitly requested. + if test "x$enable_dependency_tracking" = xyes; then + continue + else + break + fi + ;; + msvc7 | msvc7msys | msvisualcpp | msvcmsys) + # This compiler won't grok '-c -o', but also, the minuso test has + # not run yet. These depmodes are late enough in the game, and + # so weak that their functioning should not be impacted. + am__obj=conftest.${OBJEXT-o} + am__minus_obj= + ;; + none) break ;; + esac + if depmode=$depmode \ + source=sub/conftest.c object=$am__obj \ + depfile=sub/conftest.Po tmpdepfile=sub/conftest.TPo \ + $SHELL ./depcomp $depcc -c $am__minus_obj sub/conftest.c \ + >/dev/null 2>conftest.err && + grep sub/conftst1.h sub/conftest.Po > /dev/null 2>&1 && + grep sub/conftst6.h sub/conftest.Po > /dev/null 2>&1 && + grep $am__obj sub/conftest.Po > /dev/null 2>&1 && + ${MAKE-make} -s -f confmf > /dev/null 2>&1; then + # icc doesn't choke on unknown options, it will just issue warnings + # or remarks (even with -Werror). So we grep stderr for any message + # that says an option was ignored or not supported. + # When given -MP, icc 7.0 and 7.1 complain thusly: + # icc: Command line warning: ignoring option '-M'; no argument required + # The diagnosis changed in icc 8.0: + # icc: Command line remark: option '-MP' not supported + if (grep 'ignoring option' conftest.err || + grep 'not supported' conftest.err) >/dev/null 2>&1; then :; else + am_cv_CC_dependencies_compiler_type=$depmode + break + fi + fi + done + + cd .. + rm -rf conftest.dir +else + am_cv_CC_dependencies_compiler_type=none +fi + +fi +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $am_cv_CC_dependencies_compiler_type" >&5 +$as_echo "$am_cv_CC_dependencies_compiler_type" >&6; } +CCDEPMODE=depmode=$am_cv_CC_dependencies_compiler_type + + if + test "x$enable_dependency_tracking" != xno \ + && test "$am_cv_CC_dependencies_compiler_type" = gcc3; then + am__fastdepCC_TRUE= + am__fastdepCC_FALSE='#' +else + am__fastdepCC_TRUE='#' + am__fastdepCC_FALSE= +fi + + + + + +# Checks for libraries. + +# Checks for header files. + +# Checks for typedefs, structures, and compiler characteristics. + +# Checks for library functions. + +ac_config_files="$ac_config_files Makefile" + +cat >confcache <<\_ACEOF +# This file is a shell script that caches the results of configure +# tests run on this system so they can be shared between configure +# scripts and configure runs, see configure's option --config-cache. +# It is not useful on other systems. If it contains results you don't +# want to keep, you may remove or edit it. +# +# config.status only pays attention to the cache file if you give it +# the --recheck option to rerun configure. +# +# `ac_cv_env_foo' variables (set or unset) will be overridden when +# loading this file, other *unset* `ac_cv_foo' will be assigned the +# following values. + +_ACEOF + +# The following way of writing the cache mishandles newlines in values, +# but we know of no workaround that is simple, portable, and efficient. +# So, we kill variables containing newlines. +# Ultrix sh set writes to stderr and can't be redirected directly, +# and sets the high bit in the cache file unless we assign to the vars. +( + for ac_var in `(set) 2>&1 | sed -n 's/^\([a-zA-Z_][a-zA-Z0-9_]*\)=.*/\1/p'`; do + eval ac_val=\$$ac_var + case $ac_val in #( + *${as_nl}*) + case $ac_var in #( + *_cv_*) { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: cache variable $ac_var contains a newline" >&5 +$as_echo "$as_me: WARNING: cache variable $ac_var contains a newline" >&2;} ;; + esac + case $ac_var in #( + _ | IFS | as_nl) ;; #( + BASH_ARGV | BASH_SOURCE) eval $ac_var= ;; #( + *) { eval $ac_var=; unset $ac_var;} ;; + esac ;; + esac + done + + (set) 2>&1 | + case $as_nl`(ac_space=' '; set) 2>&1` in #( + *${as_nl}ac_space=\ *) + # `set' does not quote correctly, so add quotes: double-quote + # substitution turns \\\\ into \\, and sed turns \\ into \. + sed -n \ + "s/'/'\\\\''/g; + s/^\\([_$as_cr_alnum]*_cv_[_$as_cr_alnum]*\\)=\\(.*\\)/\\1='\\2'/p" + ;; #( + *) + # `set' quotes correctly as required by POSIX, so do not add quotes. + sed -n "/^[_$as_cr_alnum]*_cv_[_$as_cr_alnum]*=/p" + ;; + esac | + sort +) | + sed ' + /^ac_cv_env_/b end + t clear + :clear + s/^\([^=]*\)=\(.*[{}].*\)$/test "${\1+set}" = set || &/ + t end + s/^\([^=]*\)=\(.*\)$/\1=${\1=\2}/ + :end' >>confcache +if diff "$cache_file" confcache >/dev/null 2>&1; then :; else + if test -w "$cache_file"; then + if test "x$cache_file" != "x/dev/null"; then + { $as_echo "$as_me:${as_lineno-$LINENO}: updating cache $cache_file" >&5 +$as_echo "$as_me: updating cache $cache_file" >&6;} + if test ! -f "$cache_file" || test -h "$cache_file"; then + cat confcache >"$cache_file" + else + case $cache_file in #( + */* | ?:*) + mv -f confcache "$cache_file"$$ && + mv -f "$cache_file"$$ "$cache_file" ;; #( + *) + mv -f confcache "$cache_file" ;; + esac + fi + fi + else + { $as_echo "$as_me:${as_lineno-$LINENO}: not updating unwritable cache $cache_file" >&5 +$as_echo "$as_me: not updating unwritable cache $cache_file" >&6;} + fi +fi +rm -f confcache + +test "x$prefix" = xNONE && prefix=$ac_default_prefix +# Let make expand exec_prefix. +test "x$exec_prefix" = xNONE && exec_prefix='${prefix}' + +DEFS=-DHAVE_CONFIG_H + +ac_libobjs= +ac_ltlibobjs= +U= +for ac_i in : $LIB@&t@OBJS; do test "x$ac_i" = x: && continue + # 1. Remove the extension, and $U if already installed. + ac_script='s/\$U\././;s/\.o$//;s/\.obj$//' + ac_i=`$as_echo "$ac_i" | sed "$ac_script"` + # 2. Prepend LIBOBJDIR. When used with automake>=1.10 LIBOBJDIR + # will be set to the directory where LIBOBJS objects are built. + as_fn_append ac_libobjs " \${LIBOBJDIR}$ac_i\$U.$ac_objext" + as_fn_append ac_ltlibobjs " \${LIBOBJDIR}$ac_i"'$U.lo' +done +LIB@&t@OBJS=$ac_libobjs + +LTLIBOBJS=$ac_ltlibobjs + + +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking that generated files are newer than configure" >&5 +$as_echo_n "checking that generated files are newer than configure... " >&6; } + if test -n "$am_sleep_pid"; then + # Hide warnings about reused PIDs. + wait $am_sleep_pid 2>/dev/null + fi + { $as_echo "$as_me:${as_lineno-$LINENO}: result: done" >&5 +$as_echo "done" >&6; } + if test -n "$EXEEXT"; then + am__EXEEXT_TRUE= + am__EXEEXT_FALSE='#' +else + am__EXEEXT_TRUE='#' + am__EXEEXT_FALSE= +fi + +if test -z "${AMDEP_TRUE}" && test -z "${AMDEP_FALSE}"; then + as_fn_error $? "conditional \"AMDEP\" was never defined. +Usually this means the macro was only invoked conditionally." "$LINENO" 5 +fi +if test -z "${am__fastdepCC_TRUE}" && test -z "${am__fastdepCC_FALSE}"; then + as_fn_error $? "conditional \"am__fastdepCC\" was never defined. +Usually this means the macro was only invoked conditionally." "$LINENO" 5 +fi + +: "${CONFIG_STATUS=./config.status}" +ac_write_fail=0 +ac_clean_files_save=$ac_clean_files +ac_clean_files="$ac_clean_files $CONFIG_STATUS" +{ $as_echo "$as_me:${as_lineno-$LINENO}: creating $CONFIG_STATUS" >&5 +$as_echo "$as_me: creating $CONFIG_STATUS" >&6;} +as_write_fail=0 +cat >$CONFIG_STATUS <<_ASEOF || as_write_fail=1 +#! $SHELL +# Generated by $as_me. +# Run this file to recreate the current configuration. +# Compiler output produced by configure, useful for debugging +# configure, is in config.log if it exists. + +debug=false +ac_cs_recheck=false +ac_cs_silent=false + +SHELL=\${CONFIG_SHELL-$SHELL} +export SHELL +_ASEOF +cat >>$CONFIG_STATUS <<\_ASEOF || as_write_fail=1 +## -------------------- ## +## M4sh Initialization. ## +## -------------------- ## + +# Be more Bourne compatible +DUALCASE=1; export DUALCASE # for MKS sh +if test -n "${ZSH_VERSION+set}" && (emulate sh) >/dev/null 2>&1; then : + emulate sh + NULLCMD=: + # Pre-4.2 versions of Zsh do word splitting on ${1+"$@"}, which + # is contrary to our usage. Disable this feature. + alias -g '${1+"$@"}'='"$@"' + setopt NO_GLOB_SUBST +else + case `(set -o) 2>/dev/null` in @%:@( + *posix*) : + set -o posix ;; @%:@( + *) : + ;; +esac +fi + + +as_nl=' +' +export as_nl +# Printing a long string crashes Solaris 7 /usr/bin/printf. +as_echo='\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\' +as_echo=$as_echo$as_echo$as_echo$as_echo$as_echo +as_echo=$as_echo$as_echo$as_echo$as_echo$as_echo$as_echo +# Prefer a ksh shell builtin over an external printf program on Solaris, +# but without wasting forks for bash or zsh. +if test -z "$BASH_VERSION$ZSH_VERSION" \ + && (test "X`print -r -- $as_echo`" = "X$as_echo") 2>/dev/null; then + as_echo='print -r --' + as_echo_n='print -rn --' +elif (test "X`printf %s $as_echo`" = "X$as_echo") 2>/dev/null; then + as_echo='printf %s\n' + as_echo_n='printf %s' +else + if test "X`(/usr/ucb/echo -n -n $as_echo) 2>/dev/null`" = "X-n $as_echo"; then + as_echo_body='eval /usr/ucb/echo -n "$1$as_nl"' + as_echo_n='/usr/ucb/echo -n' + else + as_echo_body='eval expr "X$1" : "X\\(.*\\)"' + as_echo_n_body='eval + arg=$1; + case $arg in @%:@( + *"$as_nl"*) + expr "X$arg" : "X\\(.*\\)$as_nl"; + arg=`expr "X$arg" : ".*$as_nl\\(.*\\)"`;; + esac; + expr "X$arg" : "X\\(.*\\)" | tr -d "$as_nl" + ' + export as_echo_n_body + as_echo_n='sh -c $as_echo_n_body as_echo' + fi + export as_echo_body + as_echo='sh -c $as_echo_body as_echo' +fi + +# The user is always right. +if test "${PATH_SEPARATOR+set}" != set; then + PATH_SEPARATOR=: + (PATH='/bin;/bin'; FPATH=$PATH; sh -c :) >/dev/null 2>&1 && { + (PATH='/bin:/bin'; FPATH=$PATH; sh -c :) >/dev/null 2>&1 || + PATH_SEPARATOR=';' + } +fi + + +# IFS +# We need space, tab and new line, in precisely that order. Quoting is +# there to prevent editors from complaining about space-tab. +# (If _AS_PATH_WALK were called with IFS unset, it would disable word +# splitting by setting IFS to empty value.) +IFS=" "" $as_nl" + +# Find who we are. Look in the path if we contain no directory separator. +as_myself= +case $0 in @%:@(( + *[\\/]* ) as_myself=$0 ;; + *) as_save_IFS=$IFS; IFS=$PATH_SEPARATOR +for as_dir in $PATH +do + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. + test -r "$as_dir/$0" && as_myself=$as_dir/$0 && break + done +IFS=$as_save_IFS + + ;; +esac +# We did not find ourselves, most probably we were run as `sh COMMAND' +# in which case we are not to be found in the path. +if test "x$as_myself" = x; then + as_myself=$0 +fi +if test ! -f "$as_myself"; then + $as_echo "$as_myself: error: cannot find myself; rerun with an absolute file name" >&2 + exit 1 +fi + +# Unset variables that we do not need and which cause bugs (e.g. in +# pre-3.0 UWIN ksh). But do not cause bugs in bash 2.01; the "|| exit 1" +# suppresses any "Segmentation fault" message there. '((' could +# trigger a bug in pdksh 5.2.14. +for as_var in BASH_ENV ENV MAIL MAILPATH +do eval test x\${$as_var+set} = xset \ + && ( (unset $as_var) || exit 1) >/dev/null 2>&1 && unset $as_var || : +done +PS1='$ ' +PS2='> ' +PS4='+ ' + +# NLS nuisances. +LC_ALL=C +export LC_ALL +LANGUAGE=C +export LANGUAGE + +# CDPATH. +(unset CDPATH) >/dev/null 2>&1 && unset CDPATH + + +@%:@ as_fn_error STATUS ERROR [LINENO LOG_FD] +@%:@ ---------------------------------------- +@%:@ Output "`basename @S|@0`: error: ERROR" to stderr. If LINENO and LOG_FD are +@%:@ provided, also output the error to LOG_FD, referencing LINENO. Then exit the +@%:@ script with STATUS, using 1 if that was 0. +as_fn_error () +{ + as_status=$1; test $as_status -eq 0 && as_status=1 + if test "$4"; then + as_lineno=${as_lineno-"$3"} as_lineno_stack=as_lineno_stack=$as_lineno_stack + $as_echo "$as_me:${as_lineno-$LINENO}: error: $2" >&$4 + fi + $as_echo "$as_me: error: $2" >&2 + as_fn_exit $as_status +} @%:@ as_fn_error + + +@%:@ as_fn_set_status STATUS +@%:@ ----------------------- +@%:@ Set @S|@? to STATUS, without forking. +as_fn_set_status () +{ + return $1 +} @%:@ as_fn_set_status + +@%:@ as_fn_exit STATUS +@%:@ ----------------- +@%:@ Exit the shell with STATUS, even in a "trap 0" or "set -e" context. +as_fn_exit () +{ + set +e + as_fn_set_status $1 + exit $1 +} @%:@ as_fn_exit + +@%:@ as_fn_unset VAR +@%:@ --------------- +@%:@ Portably unset VAR. +as_fn_unset () +{ + { eval $1=; unset $1;} +} +as_unset=as_fn_unset +@%:@ as_fn_append VAR VALUE +@%:@ ---------------------- +@%:@ Append the text in VALUE to the end of the definition contained in VAR. Take +@%:@ advantage of any shell optimizations that allow amortized linear growth over +@%:@ repeated appends, instead of the typical quadratic growth present in naive +@%:@ implementations. +if (eval "as_var=1; as_var+=2; test x\$as_var = x12") 2>/dev/null; then : + eval 'as_fn_append () + { + eval $1+=\$2 + }' +else + as_fn_append () + { + eval $1=\$$1\$2 + } +fi # as_fn_append + +@%:@ as_fn_arith ARG... +@%:@ ------------------ +@%:@ Perform arithmetic evaluation on the ARGs, and store the result in the +@%:@ global @S|@as_val. Take advantage of shells that can avoid forks. The arguments +@%:@ must be portable across @S|@(()) and expr. +if (eval "test \$(( 1 + 1 )) = 2") 2>/dev/null; then : + eval 'as_fn_arith () + { + as_val=$(( $* )) + }' +else + as_fn_arith () + { + as_val=`expr "$@" || test $? -eq 1` + } +fi # as_fn_arith + + +if expr a : '\(a\)' >/dev/null 2>&1 && + test "X`expr 00001 : '.*\(...\)'`" = X001; then + as_expr=expr +else + as_expr=false +fi + +if (basename -- /) >/dev/null 2>&1 && test "X`basename -- / 2>&1`" = "X/"; then + as_basename=basename +else + as_basename=false +fi + +if (as_dir=`dirname -- /` && test "X$as_dir" = X/) >/dev/null 2>&1; then + as_dirname=dirname +else + as_dirname=false +fi + +as_me=`$as_basename -- "$0" || +$as_expr X/"$0" : '.*/\([^/][^/]*\)/*$' \| \ + X"$0" : 'X\(//\)$' \| \ + X"$0" : 'X\(/\)' \| . 2>/dev/null || +$as_echo X/"$0" | + sed '/^.*\/\([^/][^/]*\)\/*$/{ + s//\1/ + q + } + /^X\/\(\/\/\)$/{ + s//\1/ + q + } + /^X\/\(\/\).*/{ + s//\1/ + q + } + s/.*/./; q'` + +# Avoid depending upon Character Ranges. +as_cr_letters='abcdefghijklmnopqrstuvwxyz' +as_cr_LETTERS='ABCDEFGHIJKLMNOPQRSTUVWXYZ' +as_cr_Letters=$as_cr_letters$as_cr_LETTERS +as_cr_digits='0123456789' +as_cr_alnum=$as_cr_Letters$as_cr_digits + +ECHO_C= ECHO_N= ECHO_T= +case `echo -n x` in @%:@((((( +-n*) + case `echo 'xy\c'` in + *c*) ECHO_T=' ';; # ECHO_T is single tab character. + xy) ECHO_C='\c';; + *) echo `echo ksh88 bug on AIX 6.1` > /dev/null + ECHO_T=' ';; + esac;; +*) + ECHO_N='-n';; +esac + +rm -f conf$$ conf$$.exe conf$$.file +if test -d conf$$.dir; then + rm -f conf$$.dir/conf$$.file +else + rm -f conf$$.dir + mkdir conf$$.dir 2>/dev/null +fi +if (echo >conf$$.file) 2>/dev/null; then + if ln -s conf$$.file conf$$ 2>/dev/null; then + as_ln_s='ln -s' + # ... but there are two gotchas: + # 1) On MSYS, both `ln -s file dir' and `ln file dir' fail. + # 2) DJGPP < 2.04 has no symlinks; `ln -s' creates a wrapper executable. + # In both cases, we have to default to `cp -pR'. + ln -s conf$$.file conf$$.dir 2>/dev/null && test ! -f conf$$.exe || + as_ln_s='cp -pR' + elif ln conf$$.file conf$$ 2>/dev/null; then + as_ln_s=ln + else + as_ln_s='cp -pR' + fi +else + as_ln_s='cp -pR' +fi +rm -f conf$$ conf$$.exe conf$$.dir/conf$$.file conf$$.file +rmdir conf$$.dir 2>/dev/null + + +@%:@ as_fn_mkdir_p +@%:@ ------------- +@%:@ Create "@S|@as_dir" as a directory, including parents if necessary. +as_fn_mkdir_p () +{ + + case $as_dir in #( + -*) as_dir=./$as_dir;; + esac + test -d "$as_dir" || eval $as_mkdir_p || { + as_dirs= + while :; do + case $as_dir in #( + *\'*) as_qdir=`$as_echo "$as_dir" | sed "s/'/'\\\\\\\\''/g"`;; #'( + *) as_qdir=$as_dir;; + esac + as_dirs="'$as_qdir' $as_dirs" + as_dir=`$as_dirname -- "$as_dir" || +$as_expr X"$as_dir" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \ + X"$as_dir" : 'X\(//\)[^/]' \| \ + X"$as_dir" : 'X\(//\)$' \| \ + X"$as_dir" : 'X\(/\)' \| . 2>/dev/null || +$as_echo X"$as_dir" | + sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ + s//\1/ + q + } + /^X\(\/\/\)[^/].*/{ + s//\1/ + q + } + /^X\(\/\/\)$/{ + s//\1/ + q + } + /^X\(\/\).*/{ + s//\1/ + q + } + s/.*/./; q'` + test -d "$as_dir" && break + done + test -z "$as_dirs" || eval "mkdir $as_dirs" + } || test -d "$as_dir" || as_fn_error $? "cannot create directory $as_dir" + + +} @%:@ as_fn_mkdir_p +if mkdir -p . 2>/dev/null; then + as_mkdir_p='mkdir -p "$as_dir"' +else + test -d ./-p && rmdir ./-p + as_mkdir_p=false +fi + + +@%:@ as_fn_executable_p FILE +@%:@ ----------------------- +@%:@ Test if FILE is an executable regular file. +as_fn_executable_p () +{ + test -f "$1" && test -x "$1" +} @%:@ as_fn_executable_p +as_test_x='test -x' +as_executable_p=as_fn_executable_p + +# Sed expression to map a string onto a valid CPP name. +as_tr_cpp="eval sed 'y%*$as_cr_letters%P$as_cr_LETTERS%;s%[^_$as_cr_alnum]%_%g'" + +# Sed expression to map a string onto a valid variable name. +as_tr_sh="eval sed 'y%*+%pp%;s%[^_$as_cr_alnum]%_%g'" + + +exec 6>&1 +## ----------------------------------- ## +## Main body of $CONFIG_STATUS script. ## +## ----------------------------------- ## +_ASEOF +test $as_write_fail = 0 && chmod +x $CONFIG_STATUS || ac_write_fail=1 + +cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1 +# Save the log message, to keep $0 and so on meaningful, and to +# report actual input values of CONFIG_FILES etc. instead of their +# values after options handling. +ac_log=" +This file was extended by autohello $as_me 1.1, which was +generated by GNU Autoconf 2.69. Invocation command line was + + CONFIG_FILES = $CONFIG_FILES + CONFIG_HEADERS = $CONFIG_HEADERS + CONFIG_LINKS = $CONFIG_LINKS + CONFIG_COMMANDS = $CONFIG_COMMANDS + $ $0 $@ + +on `(hostname || uname -n) 2>/dev/null | sed 1q` +" + +_ACEOF + +case $ac_config_files in *" +"*) set x $ac_config_files; shift; ac_config_files=$*;; +esac + +case $ac_config_headers in *" +"*) set x $ac_config_headers; shift; ac_config_headers=$*;; +esac + + +cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1 +# Files that config.status was made for. +config_files="$ac_config_files" +config_headers="$ac_config_headers" +config_commands="$ac_config_commands" + +_ACEOF + +cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1 +ac_cs_usage="\ +\`$as_me' instantiates files and other configuration actions +from templates according to the current configuration. Unless the files +and actions are specified as TAGs, all are instantiated by default. + +Usage: $0 [OPTION]... [TAG]... + + -h, --help print this help, then exit + -V, --version print version number and configuration settings, then exit + --config print configuration, then exit + -q, --quiet, --silent + do not print progress messages + -d, --debug don't remove temporary files + --recheck update $as_me by reconfiguring in the same conditions + --file=FILE[:TEMPLATE] + instantiate the configuration file FILE + --header=FILE[:TEMPLATE] + instantiate the configuration header FILE + +Configuration files: +$config_files + +Configuration headers: +$config_headers + +Configuration commands: +$config_commands + +Report bugs to ." + +_ACEOF +cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1 +ac_cs_config="`$as_echo "$ac_configure_args" | sed 's/^ //; s/[\\""\`\$]/\\\\&/g'`" +ac_cs_version="\\ +autohello config.status 1.1 +configured by $0, generated by GNU Autoconf 2.69, + with options \\"\$ac_cs_config\\" + +Copyright (C) 2012 Free Software Foundation, Inc. +This config.status script is free software; the Free Software Foundation +gives unlimited permission to copy, distribute and modify it." + +ac_pwd='$ac_pwd' +srcdir='$srcdir' +INSTALL='$INSTALL' +MKDIR_P='$MKDIR_P' +AWK='$AWK' +test -n "\$AWK" || AWK=awk +_ACEOF + +cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1 +# The default lists apply if the user does not specify any file. +ac_need_defaults=: +while test $# != 0 +do + case $1 in + --*=?*) + ac_option=`expr "X$1" : 'X\([^=]*\)='` + ac_optarg=`expr "X$1" : 'X[^=]*=\(.*\)'` + ac_shift=: + ;; + --*=) + ac_option=`expr "X$1" : 'X\([^=]*\)='` + ac_optarg= + ac_shift=: + ;; + *) + ac_option=$1 + ac_optarg=$2 + ac_shift=shift + ;; + esac + + case $ac_option in + # Handling of the options. + -recheck | --recheck | --rechec | --reche | --rech | --rec | --re | --r) + ac_cs_recheck=: ;; + --version | --versio | --versi | --vers | --ver | --ve | --v | -V ) + $as_echo "$ac_cs_version"; exit ;; + --config | --confi | --conf | --con | --co | --c ) + $as_echo "$ac_cs_config"; exit ;; + --debug | --debu | --deb | --de | --d | -d ) + debug=: ;; + --file | --fil | --fi | --f ) + $ac_shift + case $ac_optarg in + *\'*) ac_optarg=`$as_echo "$ac_optarg" | sed "s/'/'\\\\\\\\''/g"` ;; + '') as_fn_error $? "missing file argument" ;; + esac + as_fn_append CONFIG_FILES " '$ac_optarg'" + ac_need_defaults=false;; + --header | --heade | --head | --hea ) + $ac_shift + case $ac_optarg in + *\'*) ac_optarg=`$as_echo "$ac_optarg" | sed "s/'/'\\\\\\\\''/g"` ;; + esac + as_fn_append CONFIG_HEADERS " '$ac_optarg'" + ac_need_defaults=false;; + --he | --h) + # Conflict between --help and --header + as_fn_error $? "ambiguous option: \`$1' +Try \`$0 --help' for more information.";; + --help | --hel | -h ) + $as_echo "$ac_cs_usage"; exit ;; + -q | -quiet | --quiet | --quie | --qui | --qu | --q \ + | -silent | --silent | --silen | --sile | --sil | --si | --s) + ac_cs_silent=: ;; + + # This is an error. + -*) as_fn_error $? "unrecognized option: \`$1' +Try \`$0 --help' for more information." ;; + + *) as_fn_append ac_config_targets " $1" + ac_need_defaults=false ;; + + esac + shift +done + +ac_configure_extra_args= + +if $ac_cs_silent; then + exec 6>/dev/null + ac_configure_extra_args="$ac_configure_extra_args --silent" +fi + +_ACEOF +cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1 +if \$ac_cs_recheck; then + set X $SHELL '$0' $ac_configure_args \$ac_configure_extra_args --no-create --no-recursion + shift + \$as_echo "running CONFIG_SHELL=$SHELL \$*" >&6 + CONFIG_SHELL='$SHELL' + export CONFIG_SHELL + exec "\$@" +fi + +_ACEOF +cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1 +exec 5>>config.log +{ + echo + sed 'h;s/./-/g;s/^.../@%:@@%:@ /;s/...$/ @%:@@%:@/;p;x;p;x' <<_ASBOX +@%:@@%:@ Running $as_me. @%:@@%:@ +_ASBOX + $as_echo "$ac_log" +} >&5 + +_ACEOF +cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1 +# +# INIT-COMMANDS +# +AMDEP_TRUE="$AMDEP_TRUE" ac_aux_dir="$ac_aux_dir" + +_ACEOF + +cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1 + +# Handling of arguments. +for ac_config_target in $ac_config_targets +do + case $ac_config_target in + "config.h") CONFIG_HEADERS="$CONFIG_HEADERS config.h" ;; + "depfiles") CONFIG_COMMANDS="$CONFIG_COMMANDS depfiles" ;; + "Makefile") CONFIG_FILES="$CONFIG_FILES Makefile" ;; + + *) as_fn_error $? "invalid argument: \`$ac_config_target'" "$LINENO" 5;; + esac +done + + +# If the user did not use the arguments to specify the items to instantiate, +# then the envvar interface is used. Set only those that are not. +# We use the long form for the default assignment because of an extremely +# bizarre bug on SunOS 4.1.3. +if $ac_need_defaults; then + test "${CONFIG_FILES+set}" = set || CONFIG_FILES=$config_files + test "${CONFIG_HEADERS+set}" = set || CONFIG_HEADERS=$config_headers + test "${CONFIG_COMMANDS+set}" = set || CONFIG_COMMANDS=$config_commands +fi + +# Have a temporary directory for convenience. Make it in the build tree +# simply because there is no reason against having it here, and in addition, +# creating and moving files from /tmp can sometimes cause problems. +# Hook for its removal unless debugging. +# Note that there is a small window in which the directory will not be cleaned: +# after its creation but before its name has been assigned to `$tmp'. +$debug || +{ + tmp= ac_tmp= + trap 'exit_status=$? + : "${ac_tmp:=$tmp}" + { test ! -d "$ac_tmp" || rm -fr "$ac_tmp"; } && exit $exit_status +' 0 + trap 'as_fn_exit 1' 1 2 13 15 +} +# Create a (secure) tmp directory for tmp files. + +{ + tmp=`(umask 077 && mktemp -d "./confXXXXXX") 2>/dev/null` && + test -d "$tmp" +} || +{ + tmp=./conf$$-$RANDOM + (umask 077 && mkdir "$tmp") +} || as_fn_error $? "cannot create a temporary directory in ." "$LINENO" 5 +ac_tmp=$tmp + +# Set up the scripts for CONFIG_FILES section. +# No need to generate them if there are no CONFIG_FILES. +# This happens for instance with `./config.status config.h'. +if test -n "$CONFIG_FILES"; then + + +ac_cr=`echo X | tr X '\015'` +# On cygwin, bash can eat \r inside `` if the user requested igncr. +# But we know of no other shell where ac_cr would be empty at this +# point, so we can use a bashism as a fallback. +if test "x$ac_cr" = x; then + eval ac_cr=\$\'\\r\' +fi +ac_cs_awk_cr=`$AWK 'BEGIN { print "a\rb" }' /dev/null` +if test "$ac_cs_awk_cr" = "a${ac_cr}b"; then + ac_cs_awk_cr='\\r' +else + ac_cs_awk_cr=$ac_cr +fi + +echo 'BEGIN {' >"$ac_tmp/subs1.awk" && +_ACEOF + + +{ + echo "cat >conf$$subs.awk <<_ACEOF" && + echo "$ac_subst_vars" | sed 's/.*/&!$&$ac_delim/' && + echo "_ACEOF" +} >conf$$subs.sh || + as_fn_error $? "could not make $CONFIG_STATUS" "$LINENO" 5 +ac_delim_num=`echo "$ac_subst_vars" | grep -c '^'` +ac_delim='%!_!# ' +for ac_last_try in false false false false false :; do + . ./conf$$subs.sh || + as_fn_error $? "could not make $CONFIG_STATUS" "$LINENO" 5 + + ac_delim_n=`sed -n "s/.*$ac_delim\$/X/p" conf$$subs.awk | grep -c X` + if test $ac_delim_n = $ac_delim_num; then + break + elif $ac_last_try; then + as_fn_error $? "could not make $CONFIG_STATUS" "$LINENO" 5 + else + ac_delim="$ac_delim!$ac_delim _$ac_delim!! " + fi +done +rm -f conf$$subs.sh + +cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1 +cat >>"\$ac_tmp/subs1.awk" <<\\_ACAWK && +_ACEOF +sed -n ' +h +s/^/S["/; s/!.*/"]=/ +p +g +s/^[^!]*!// +:repl +t repl +s/'"$ac_delim"'$// +t delim +:nl +h +s/\(.\{148\}\)..*/\1/ +t more1 +s/["\\]/\\&/g; s/^/"/; s/$/\\n"\\/ +p +n +b repl +:more1 +s/["\\]/\\&/g; s/^/"/; s/$/"\\/ +p +g +s/.\{148\}// +t nl +:delim +h +s/\(.\{148\}\)..*/\1/ +t more2 +s/["\\]/\\&/g; s/^/"/; s/$/"/ +p +b +:more2 +s/["\\]/\\&/g; s/^/"/; s/$/"\\/ +p +g +s/.\{148\}// +t delim +' >$CONFIG_STATUS || ac_write_fail=1 +rm -f conf$$subs.awk +cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1 +_ACAWK +cat >>"\$ac_tmp/subs1.awk" <<_ACAWK && + for (key in S) S_is_set[key] = 1 + FS = "" + +} +{ + line = $ 0 + nfields = split(line, field, "@") + substed = 0 + len = length(field[1]) + for (i = 2; i < nfields; i++) { + key = field[i] + keylen = length(key) + if (S_is_set[key]) { + value = S[key] + line = substr(line, 1, len) "" value "" substr(line, len + keylen + 3) + len += length(value) + length(field[++i]) + substed = 1 + } else + len += 1 + keylen + } + + print line +} + +_ACAWK +_ACEOF +cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1 +if sed "s/$ac_cr//" < /dev/null > /dev/null 2>&1; then + sed "s/$ac_cr\$//; s/$ac_cr/$ac_cs_awk_cr/g" +else + cat +fi < "$ac_tmp/subs1.awk" > "$ac_tmp/subs.awk" \ + || as_fn_error $? "could not setup config files machinery" "$LINENO" 5 +_ACEOF + +# VPATH may cause trouble with some makes, so we remove sole $(srcdir), +# ${srcdir} and @srcdir@ entries from VPATH if srcdir is ".", strip leading and +# trailing colons and then remove the whole line if VPATH becomes empty +# (actually we leave an empty line to preserve line numbers). +if test "x$srcdir" = x.; then + ac_vpsub='/^[ ]*VPATH[ ]*=[ ]*/{ +h +s/// +s/^/:/ +s/[ ]*$/:/ +s/:\$(srcdir):/:/g +s/:\${srcdir}:/:/g +s/:@srcdir@:/:/g +s/^:*// +s/:*$// +x +s/\(=[ ]*\).*/\1/ +G +s/\n// +s/^[^=]*=[ ]*$// +}' +fi + +cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1 +fi # test -n "$CONFIG_FILES" + +# Set up the scripts for CONFIG_HEADERS section. +# No need to generate them if there are no CONFIG_HEADERS. +# This happens for instance with `./config.status Makefile'. +if test -n "$CONFIG_HEADERS"; then +cat >"$ac_tmp/defines.awk" <<\_ACAWK || +BEGIN { +_ACEOF + +# Transform confdefs.h into an awk script `defines.awk', embedded as +# here-document in config.status, that substitutes the proper values into +# config.h.in to produce config.h. + +# Create a delimiter string that does not exist in confdefs.h, to ease +# handling of long lines. +ac_delim='%!_!# ' +for ac_last_try in false false :; do + ac_tt=`sed -n "/$ac_delim/p" confdefs.h` + if test -z "$ac_tt"; then + break + elif $ac_last_try; then + as_fn_error $? "could not make $CONFIG_HEADERS" "$LINENO" 5 + else + ac_delim="$ac_delim!$ac_delim _$ac_delim!! " + fi +done + +# For the awk script, D is an array of macro values keyed by name, +# likewise P contains macro parameters if any. Preserve backslash +# newline sequences. + +ac_word_re=[_$as_cr_Letters][_$as_cr_alnum]* +sed -n ' +s/.\{148\}/&'"$ac_delim"'/g +t rset +:rset +s/^[ ]*#[ ]*define[ ][ ]*/ / +t def +d +:def +s/\\$// +t bsnl +s/["\\]/\\&/g +s/^ \('"$ac_word_re"'\)\(([^()]*)\)[ ]*\(.*\)/P["\1"]="\2"\ +D["\1"]=" \3"/p +s/^ \('"$ac_word_re"'\)[ ]*\(.*\)/D["\1"]=" \2"/p +d +:bsnl +s/["\\]/\\&/g +s/^ \('"$ac_word_re"'\)\(([^()]*)\)[ ]*\(.*\)/P["\1"]="\2"\ +D["\1"]=" \3\\\\\\n"\\/p +t cont +s/^ \('"$ac_word_re"'\)[ ]*\(.*\)/D["\1"]=" \2\\\\\\n"\\/p +t cont +d +:cont +n +s/.\{148\}/&'"$ac_delim"'/g +t clear +:clear +s/\\$// +t bsnlc +s/["\\]/\\&/g; s/^/"/; s/$/"/p +d +:bsnlc +s/["\\]/\\&/g; s/^/"/; s/$/\\\\\\n"\\/p +b cont +' >$CONFIG_STATUS || ac_write_fail=1 + +cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1 + for (key in D) D_is_set[key] = 1 + FS = "" +} +/^[\t ]*#[\t ]*(define|undef)[\t ]+$ac_word_re([\t (]|\$)/ { + line = \$ 0 + split(line, arg, " ") + if (arg[1] == "#") { + defundef = arg[2] + mac1 = arg[3] + } else { + defundef = substr(arg[1], 2) + mac1 = arg[2] + } + split(mac1, mac2, "(") #) + macro = mac2[1] + prefix = substr(line, 1, index(line, defundef) - 1) + if (D_is_set[macro]) { + # Preserve the white space surrounding the "#". + print prefix "define", macro P[macro] D[macro] + next + } else { + # Replace #undef with comments. This is necessary, for example, + # in the case of _POSIX_SOURCE, which is predefined and required + # on some systems where configure will not decide to define it. + if (defundef == "undef") { + print "/*", prefix defundef, macro, "*/" + next + } + } +} +{ print } +_ACAWK +_ACEOF +cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1 + as_fn_error $? "could not setup config headers machinery" "$LINENO" 5 +fi # test -n "$CONFIG_HEADERS" + + +eval set X " :F $CONFIG_FILES :H $CONFIG_HEADERS :C $CONFIG_COMMANDS" +shift +for ac_tag +do + case $ac_tag in + :[FHLC]) ac_mode=$ac_tag; continue;; + esac + case $ac_mode$ac_tag in + :[FHL]*:*);; + :L* | :C*:*) as_fn_error $? "invalid tag \`$ac_tag'" "$LINENO" 5;; + :[FH]-) ac_tag=-:-;; + :[FH]*) ac_tag=$ac_tag:$ac_tag.in;; + esac + ac_save_IFS=$IFS + IFS=: + set x $ac_tag + IFS=$ac_save_IFS + shift + ac_file=$1 + shift + + case $ac_mode in + :L) ac_source=$1;; + :[FH]) + ac_file_inputs= + for ac_f + do + case $ac_f in + -) ac_f="$ac_tmp/stdin";; + *) # Look for the file first in the build tree, then in the source tree + # (if the path is not absolute). The absolute path cannot be DOS-style, + # because $ac_f cannot contain `:'. + test -f "$ac_f" || + case $ac_f in + [\\/$]*) false;; + *) test -f "$srcdir/$ac_f" && ac_f="$srcdir/$ac_f";; + esac || + as_fn_error 1 "cannot find input file: \`$ac_f'" "$LINENO" 5;; + esac + case $ac_f in *\'*) ac_f=`$as_echo "$ac_f" | sed "s/'/'\\\\\\\\''/g"`;; esac + as_fn_append ac_file_inputs " '$ac_f'" + done + + # Let's still pretend it is `configure' which instantiates (i.e., don't + # use $as_me), people would be surprised to read: + # /* config.h. Generated by config.status. */ + configure_input='Generated from '` + $as_echo "$*" | sed 's|^[^:]*/||;s|:[^:]*/|, |g' + `' by configure.' + if test x"$ac_file" != x-; then + configure_input="$ac_file. $configure_input" + { $as_echo "$as_me:${as_lineno-$LINENO}: creating $ac_file" >&5 +$as_echo "$as_me: creating $ac_file" >&6;} + fi + # Neutralize special characters interpreted by sed in replacement strings. + case $configure_input in #( + *\&* | *\|* | *\\* ) + ac_sed_conf_input=`$as_echo "$configure_input" | + sed 's/[\\\\&|]/\\\\&/g'`;; #( + *) ac_sed_conf_input=$configure_input;; + esac + + case $ac_tag in + *:-:* | *:-) cat >"$ac_tmp/stdin" \ + || as_fn_error $? "could not create $ac_file" "$LINENO" 5 ;; + esac + ;; + esac + + ac_dir=`$as_dirname -- "$ac_file" || +$as_expr X"$ac_file" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \ + X"$ac_file" : 'X\(//\)[^/]' \| \ + X"$ac_file" : 'X\(//\)$' \| \ + X"$ac_file" : 'X\(/\)' \| . 2>/dev/null || +$as_echo X"$ac_file" | + sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ + s//\1/ + q + } + /^X\(\/\/\)[^/].*/{ + s//\1/ + q + } + /^X\(\/\/\)$/{ + s//\1/ + q + } + /^X\(\/\).*/{ + s//\1/ + q + } + s/.*/./; q'` + as_dir="$ac_dir"; as_fn_mkdir_p + ac_builddir=. + +case "$ac_dir" in +.) ac_dir_suffix= ac_top_builddir_sub=. ac_top_build_prefix= ;; +*) + ac_dir_suffix=/`$as_echo "$ac_dir" | sed 's|^\.[\\/]||'` + # A ".." for each directory in $ac_dir_suffix. + ac_top_builddir_sub=`$as_echo "$ac_dir_suffix" | sed 's|/[^\\/]*|/..|g;s|/||'` + case $ac_top_builddir_sub in + "") ac_top_builddir_sub=. ac_top_build_prefix= ;; + *) ac_top_build_prefix=$ac_top_builddir_sub/ ;; + esac ;; +esac +ac_abs_top_builddir=$ac_pwd +ac_abs_builddir=$ac_pwd$ac_dir_suffix +# for backward compatibility: +ac_top_builddir=$ac_top_build_prefix + +case $srcdir in + .) # We are building in place. + ac_srcdir=. + ac_top_srcdir=$ac_top_builddir_sub + ac_abs_top_srcdir=$ac_pwd ;; + [\\/]* | ?:[\\/]* ) # Absolute name. + ac_srcdir=$srcdir$ac_dir_suffix; + ac_top_srcdir=$srcdir + ac_abs_top_srcdir=$srcdir ;; + *) # Relative name. + ac_srcdir=$ac_top_build_prefix$srcdir$ac_dir_suffix + ac_top_srcdir=$ac_top_build_prefix$srcdir + ac_abs_top_srcdir=$ac_pwd/$srcdir ;; +esac +ac_abs_srcdir=$ac_abs_top_srcdir$ac_dir_suffix + + + case $ac_mode in + :F) + # + # CONFIG_FILE + # + + case $INSTALL in + [\\/$]* | ?:[\\/]* ) ac_INSTALL=$INSTALL ;; + *) ac_INSTALL=$ac_top_build_prefix$INSTALL ;; + esac + ac_MKDIR_P=$MKDIR_P + case $MKDIR_P in + [\\/$]* | ?:[\\/]* ) ;; + */*) ac_MKDIR_P=$ac_top_build_prefix$MKDIR_P ;; + esac +_ACEOF + +cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1 +# If the template does not know about datarootdir, expand it. +# FIXME: This hack should be removed a few years after 2.60. +ac_datarootdir_hack=; ac_datarootdir_seen= +ac_sed_dataroot=' +/datarootdir/ { + p + q +} +/@datadir@/p +/@docdir@/p +/@infodir@/p +/@localedir@/p +/@mandir@/p' +case `eval "sed -n \"\$ac_sed_dataroot\" $ac_file_inputs"` in +*datarootdir*) ac_datarootdir_seen=yes;; +*@datadir@*|*@docdir@*|*@infodir@*|*@localedir@*|*@mandir@*) + { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: $ac_file_inputs seems to ignore the --datarootdir setting" >&5 +$as_echo "$as_me: WARNING: $ac_file_inputs seems to ignore the --datarootdir setting" >&2;} +_ACEOF +cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1 + ac_datarootdir_hack=' + s&@datadir@&$datadir&g + s&@docdir@&$docdir&g + s&@infodir@&$infodir&g + s&@localedir@&$localedir&g + s&@mandir@&$mandir&g + s&\\\${datarootdir}&$datarootdir&g' ;; +esac +_ACEOF + +# Neutralize VPATH when `$srcdir' = `.'. +# Shell code in configure.ac might set extrasub. +# FIXME: do we really want to maintain this feature? +cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1 +ac_sed_extra="$ac_vpsub +$extrasub +_ACEOF +cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1 +:t +/@[a-zA-Z_][a-zA-Z_0-9]*@/!b +s|@configure_input@|$ac_sed_conf_input|;t t +s&@top_builddir@&$ac_top_builddir_sub&;t t +s&@top_build_prefix@&$ac_top_build_prefix&;t t +s&@srcdir@&$ac_srcdir&;t t +s&@abs_srcdir@&$ac_abs_srcdir&;t t +s&@top_srcdir@&$ac_top_srcdir&;t t +s&@abs_top_srcdir@&$ac_abs_top_srcdir&;t t +s&@builddir@&$ac_builddir&;t t +s&@abs_builddir@&$ac_abs_builddir&;t t +s&@abs_top_builddir@&$ac_abs_top_builddir&;t t +s&@INSTALL@&$ac_INSTALL&;t t +s&@MKDIR_P@&$ac_MKDIR_P&;t t +$ac_datarootdir_hack +" +eval sed \"\$ac_sed_extra\" "$ac_file_inputs" | $AWK -f "$ac_tmp/subs.awk" \ + >$ac_tmp/out || as_fn_error $? "could not create $ac_file" "$LINENO" 5 + +test -z "$ac_datarootdir_hack$ac_datarootdir_seen" && + { ac_out=`sed -n '/\${datarootdir}/p' "$ac_tmp/out"`; test -n "$ac_out"; } && + { ac_out=`sed -n '/^[ ]*datarootdir[ ]*:*=/p' \ + "$ac_tmp/out"`; test -z "$ac_out"; } && + { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: $ac_file contains a reference to the variable \`datarootdir' +which seems to be undefined. Please make sure it is defined" >&5 +$as_echo "$as_me: WARNING: $ac_file contains a reference to the variable \`datarootdir' +which seems to be undefined. Please make sure it is defined" >&2;} + + rm -f "$ac_tmp/stdin" + case $ac_file in + -) cat "$ac_tmp/out" && rm -f "$ac_tmp/out";; + *) rm -f "$ac_file" && mv "$ac_tmp/out" "$ac_file";; + esac \ + || as_fn_error $? "could not create $ac_file" "$LINENO" 5 + ;; + :H) + # + # CONFIG_HEADER + # + if test x"$ac_file" != x-; then + { + $as_echo "/* $configure_input */" \ + && eval '$AWK -f "$ac_tmp/defines.awk"' "$ac_file_inputs" + } >"$ac_tmp/config.h" \ + || as_fn_error $? "could not create $ac_file" "$LINENO" 5 + if diff "$ac_file" "$ac_tmp/config.h" >/dev/null 2>&1; then + { $as_echo "$as_me:${as_lineno-$LINENO}: $ac_file is unchanged" >&5 +$as_echo "$as_me: $ac_file is unchanged" >&6;} + else + rm -f "$ac_file" + mv "$ac_tmp/config.h" "$ac_file" \ + || as_fn_error $? "could not create $ac_file" "$LINENO" 5 + fi + else + $as_echo "/* $configure_input */" \ + && eval '$AWK -f "$ac_tmp/defines.awk"' "$ac_file_inputs" \ + || as_fn_error $? "could not create -" "$LINENO" 5 + fi +# Compute "$ac_file"'s index in $config_headers. +_am_arg="$ac_file" +_am_stamp_count=1 +for _am_header in $config_headers :; do + case $_am_header in + $_am_arg | $_am_arg:* ) + break ;; + * ) + _am_stamp_count=`expr $_am_stamp_count + 1` ;; + esac +done +echo "timestamp for $_am_arg" >`$as_dirname -- "$_am_arg" || +$as_expr X"$_am_arg" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \ + X"$_am_arg" : 'X\(//\)[^/]' \| \ + X"$_am_arg" : 'X\(//\)$' \| \ + X"$_am_arg" : 'X\(/\)' \| . 2>/dev/null || +$as_echo X"$_am_arg" | + sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ + s//\1/ + q + } + /^X\(\/\/\)[^/].*/{ + s//\1/ + q + } + /^X\(\/\/\)$/{ + s//\1/ + q + } + /^X\(\/\).*/{ + s//\1/ + q + } + s/.*/./; q'`/stamp-h$_am_stamp_count + ;; + + :C) { $as_echo "$as_me:${as_lineno-$LINENO}: executing $ac_file commands" >&5 +$as_echo "$as_me: executing $ac_file commands" >&6;} + ;; + esac + + + case $ac_file$ac_mode in + "depfiles":C) test x"$AMDEP_TRUE" != x"" || { + # Older Autoconf quotes --file arguments for eval, but not when files + # are listed without --file. Let's play safe and only enable the eval + # if we detect the quoting. + case $CONFIG_FILES in + *\'*) eval set x "$CONFIG_FILES" ;; + *) set x $CONFIG_FILES ;; + esac + shift + for mf + do + # Strip MF so we end up with the name of the file. + mf=`echo "$mf" | sed -e 's/:.*$//'` + # Check whether this is an Automake generated Makefile or not. + # We used to match only the files named 'Makefile.in', but + # some people rename them; so instead we look at the file content. + # Grep'ing the first line is not enough: some people post-process + # each Makefile.in and add a new line on top of each file to say so. + # Grep'ing the whole file is not good either: AIX grep has a line + # limit of 2048, but all sed's we know have understand at least 4000. + if sed -n 's,^#.*generated by automake.*,X,p' "$mf" | grep X >/dev/null 2>&1; then + dirpart=`$as_dirname -- "$mf" || +$as_expr X"$mf" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \ + X"$mf" : 'X\(//\)[^/]' \| \ + X"$mf" : 'X\(//\)$' \| \ + X"$mf" : 'X\(/\)' \| . 2>/dev/null || +$as_echo X"$mf" | + sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ + s//\1/ + q + } + /^X\(\/\/\)[^/].*/{ + s//\1/ + q + } + /^X\(\/\/\)$/{ + s//\1/ + q + } + /^X\(\/\).*/{ + s//\1/ + q + } + s/.*/./; q'` + else + continue + fi + # Extract the definition of DEPDIR, am__include, and am__quote + # from the Makefile without running 'make'. + DEPDIR=`sed -n 's/^DEPDIR = //p' < "$mf"` + test -z "$DEPDIR" && continue + am__include=`sed -n 's/^am__include = //p' < "$mf"` + test -z "$am__include" && continue + am__quote=`sed -n 's/^am__quote = //p' < "$mf"` + # Find all dependency output files, they are included files with + # $(DEPDIR) in their names. We invoke sed twice because it is the + # simplest approach to changing $(DEPDIR) to its actual value in the + # expansion. + for file in `sed -n " + s/^$am__include $am__quote\(.*(DEPDIR).*\)$am__quote"'$/\1/p' <"$mf" | \ + sed -e 's/\$(DEPDIR)/'"$DEPDIR"'/g'`; do + # Make sure the directory exists. + test -f "$dirpart/$file" && continue + fdir=`$as_dirname -- "$file" || +$as_expr X"$file" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \ + X"$file" : 'X\(//\)[^/]' \| \ + X"$file" : 'X\(//\)$' \| \ + X"$file" : 'X\(/\)' \| . 2>/dev/null || +$as_echo X"$file" | + sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ + s//\1/ + q + } + /^X\(\/\/\)[^/].*/{ + s//\1/ + q + } + /^X\(\/\/\)$/{ + s//\1/ + q + } + /^X\(\/\).*/{ + s//\1/ + q + } + s/.*/./; q'` + as_dir=$dirpart/$fdir; as_fn_mkdir_p + # echo "creating $dirpart/$file" + echo '# dummy' > "$dirpart/$file" + done + done +} + ;; + + esac +done # for ac_tag + + +as_fn_exit 0 +_ACEOF +ac_clean_files=$ac_clean_files_save + +test $ac_write_fail = 0 || + as_fn_error $? "write failure creating $CONFIG_STATUS" "$LINENO" 5 + + +# configure is writing to config.log, and then calls config.status. +# config.status does its own redirection, appending to config.log. +# Unfortunately, on DOS this fails, as config.log is still kept open +# by configure, so config.status won't be able to write to it; its +# output is simply discarded. So we exec the FD to /dev/null, +# effectively closing config.log, so it can be properly (re)opened and +# appended to by config.status. When coming back to configure, we +# need to make the FD available again. +if test "$no_create" != yes; then + ac_cs_success=: + ac_config_status_args= + test "$silent" = yes && + ac_config_status_args="$ac_config_status_args --quiet" + exec 5>/dev/null + $SHELL $CONFIG_STATUS $ac_config_status_args || ac_cs_success=false + exec 5>>config.log + # Use ||, not &&, to avoid exiting from the if with $? = 1, which + # would make configure fail if this is the last instruction. + $ac_cs_success || as_fn_exit 1 +fi +if test -n "$ac_unrecognized_opts" && test "$enable_option_checking" != no; then + { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: unrecognized options: $ac_unrecognized_opts" >&5 +$as_echo "$as_me: WARNING: unrecognized options: $ac_unrecognized_opts" >&2;} +fi + diff --git a/examples/yocto/meta-mini/recipes-hello/autohello/files/autohello/autom4te.cache/output.1 b/examples/yocto/meta-mini/recipes-hello/autohello/files/autohello/autom4te.cache/output.1 new file mode 100644 index 0000000..d8629ca --- /dev/null +++ b/examples/yocto/meta-mini/recipes-hello/autohello/files/autohello/autom4te.cache/output.1 @@ -0,0 +1,4905 @@ +@%:@! /bin/sh +@%:@ Guess values for system-dependent variables and create Makefiles. +@%:@ Generated by GNU Autoconf 2.69 for autohello 1.1. +@%:@ +@%:@ Report bugs to . +@%:@ +@%:@ +@%:@ Copyright (C) 1992-1996, 1998-2012 Free Software Foundation, Inc. +@%:@ +@%:@ +@%:@ This configure script is free software; the Free Software Foundation +@%:@ gives unlimited permission to copy, distribute and modify it. +## -------------------- ## +## M4sh Initialization. ## +## -------------------- ## + +# Be more Bourne compatible +DUALCASE=1; export DUALCASE # for MKS sh +if test -n "${ZSH_VERSION+set}" && (emulate sh) >/dev/null 2>&1; then : + emulate sh + NULLCMD=: + # Pre-4.2 versions of Zsh do word splitting on ${1+"$@"}, which + # is contrary to our usage. Disable this feature. + alias -g '${1+"$@"}'='"$@"' + setopt NO_GLOB_SUBST +else + case `(set -o) 2>/dev/null` in @%:@( + *posix*) : + set -o posix ;; @%:@( + *) : + ;; +esac +fi + + +as_nl=' +' +export as_nl +# Printing a long string crashes Solaris 7 /usr/bin/printf. +as_echo='\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\' +as_echo=$as_echo$as_echo$as_echo$as_echo$as_echo +as_echo=$as_echo$as_echo$as_echo$as_echo$as_echo$as_echo +# Prefer a ksh shell builtin over an external printf program on Solaris, +# but without wasting forks for bash or zsh. +if test -z "$BASH_VERSION$ZSH_VERSION" \ + && (test "X`print -r -- $as_echo`" = "X$as_echo") 2>/dev/null; then + as_echo='print -r --' + as_echo_n='print -rn --' +elif (test "X`printf %s $as_echo`" = "X$as_echo") 2>/dev/null; then + as_echo='printf %s\n' + as_echo_n='printf %s' +else + if test "X`(/usr/ucb/echo -n -n $as_echo) 2>/dev/null`" = "X-n $as_echo"; then + as_echo_body='eval /usr/ucb/echo -n "$1$as_nl"' + as_echo_n='/usr/ucb/echo -n' + else + as_echo_body='eval expr "X$1" : "X\\(.*\\)"' + as_echo_n_body='eval + arg=$1; + case $arg in @%:@( + *"$as_nl"*) + expr "X$arg" : "X\\(.*\\)$as_nl"; + arg=`expr "X$arg" : ".*$as_nl\\(.*\\)"`;; + esac; + expr "X$arg" : "X\\(.*\\)" | tr -d "$as_nl" + ' + export as_echo_n_body + as_echo_n='sh -c $as_echo_n_body as_echo' + fi + export as_echo_body + as_echo='sh -c $as_echo_body as_echo' +fi + +# The user is always right. +if test "${PATH_SEPARATOR+set}" != set; then + PATH_SEPARATOR=: + (PATH='/bin;/bin'; FPATH=$PATH; sh -c :) >/dev/null 2>&1 && { + (PATH='/bin:/bin'; FPATH=$PATH; sh -c :) >/dev/null 2>&1 || + PATH_SEPARATOR=';' + } +fi + + +# IFS +# We need space, tab and new line, in precisely that order. Quoting is +# there to prevent editors from complaining about space-tab. +# (If _AS_PATH_WALK were called with IFS unset, it would disable word +# splitting by setting IFS to empty value.) +IFS=" "" $as_nl" + +# Find who we are. Look in the path if we contain no directory separator. +as_myself= +case $0 in @%:@(( + *[\\/]* ) as_myself=$0 ;; + *) as_save_IFS=$IFS; IFS=$PATH_SEPARATOR +for as_dir in $PATH +do + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. + test -r "$as_dir/$0" && as_myself=$as_dir/$0 && break + done +IFS=$as_save_IFS + + ;; +esac +# We did not find ourselves, most probably we were run as `sh COMMAND' +# in which case we are not to be found in the path. +if test "x$as_myself" = x; then + as_myself=$0 +fi +if test ! -f "$as_myself"; then + $as_echo "$as_myself: error: cannot find myself; rerun with an absolute file name" >&2 + exit 1 +fi + +# Unset variables that we do not need and which cause bugs (e.g. in +# pre-3.0 UWIN ksh). But do not cause bugs in bash 2.01; the "|| exit 1" +# suppresses any "Segmentation fault" message there. '((' could +# trigger a bug in pdksh 5.2.14. +for as_var in BASH_ENV ENV MAIL MAILPATH +do eval test x\${$as_var+set} = xset \ + && ( (unset $as_var) || exit 1) >/dev/null 2>&1 && unset $as_var || : +done +PS1='$ ' +PS2='> ' +PS4='+ ' + +# NLS nuisances. +LC_ALL=C +export LC_ALL +LANGUAGE=C +export LANGUAGE + +# CDPATH. +(unset CDPATH) >/dev/null 2>&1 && unset CDPATH + +# Use a proper internal environment variable to ensure we don't fall + # into an infinite loop, continuously re-executing ourselves. + if test x"${_as_can_reexec}" != xno && test "x$CONFIG_SHELL" != x; then + _as_can_reexec=no; export _as_can_reexec; + # We cannot yet assume a decent shell, so we have to provide a +# neutralization value for shells without unset; and this also +# works around shells that cannot unset nonexistent variables. +# Preserve -v and -x to the replacement shell. +BASH_ENV=/dev/null +ENV=/dev/null +(unset BASH_ENV) >/dev/null 2>&1 && unset BASH_ENV ENV +case $- in @%:@ (((( + *v*x* | *x*v* ) as_opts=-vx ;; + *v* ) as_opts=-v ;; + *x* ) as_opts=-x ;; + * ) as_opts= ;; +esac +exec $CONFIG_SHELL $as_opts "$as_myself" ${1+"$@"} +# Admittedly, this is quite paranoid, since all the known shells bail +# out after a failed `exec'. +$as_echo "$0: could not re-execute with $CONFIG_SHELL" >&2 +as_fn_exit 255 + fi + # We don't want this to propagate to other subprocesses. + { _as_can_reexec=; unset _as_can_reexec;} +if test "x$CONFIG_SHELL" = x; then + as_bourne_compatible="if test -n \"\${ZSH_VERSION+set}\" && (emulate sh) >/dev/null 2>&1; then : + emulate sh + NULLCMD=: + # Pre-4.2 versions of Zsh do word splitting on \${1+\"\$@\"}, which + # is contrary to our usage. Disable this feature. + alias -g '\${1+\"\$@\"}'='\"\$@\"' + setopt NO_GLOB_SUBST +else + case \`(set -o) 2>/dev/null\` in @%:@( + *posix*) : + set -o posix ;; @%:@( + *) : + ;; +esac +fi +" + as_required="as_fn_return () { (exit \$1); } +as_fn_success () { as_fn_return 0; } +as_fn_failure () { as_fn_return 1; } +as_fn_ret_success () { return 0; } +as_fn_ret_failure () { return 1; } + +exitcode=0 +as_fn_success || { exitcode=1; echo as_fn_success failed.; } +as_fn_failure && { exitcode=1; echo as_fn_failure succeeded.; } +as_fn_ret_success || { exitcode=1; echo as_fn_ret_success failed.; } +as_fn_ret_failure && { exitcode=1; echo as_fn_ret_failure succeeded.; } +if ( set x; as_fn_ret_success y && test x = \"\$1\" ); then : + +else + exitcode=1; echo positional parameters were not saved. +fi +test x\$exitcode = x0 || exit 1 +test -x / || exit 1" + as_suggested=" as_lineno_1=";as_suggested=$as_suggested$LINENO;as_suggested=$as_suggested" as_lineno_1a=\$LINENO + as_lineno_2=";as_suggested=$as_suggested$LINENO;as_suggested=$as_suggested" as_lineno_2a=\$LINENO + eval 'test \"x\$as_lineno_1'\$as_run'\" != \"x\$as_lineno_2'\$as_run'\" && + test \"x\`expr \$as_lineno_1'\$as_run' + 1\`\" = \"x\$as_lineno_2'\$as_run'\"' || exit 1" + if (eval "$as_required") 2>/dev/null; then : + as_have_required=yes +else + as_have_required=no +fi + if test x$as_have_required = xyes && (eval "$as_suggested") 2>/dev/null; then : + +else + as_save_IFS=$IFS; IFS=$PATH_SEPARATOR +as_found=false +for as_dir in /bin$PATH_SEPARATOR/usr/bin$PATH_SEPARATOR$PATH +do + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. + as_found=: + case $as_dir in @%:@( + /*) + for as_base in sh bash ksh sh5; do + # Try only shells that exist, to save several forks. + as_shell=$as_dir/$as_base + if { test -f "$as_shell" || test -f "$as_shell.exe"; } && + { $as_echo "$as_bourne_compatible""$as_required" | as_run=a "$as_shell"; } 2>/dev/null; then : + CONFIG_SHELL=$as_shell as_have_required=yes + if { $as_echo "$as_bourne_compatible""$as_suggested" | as_run=a "$as_shell"; } 2>/dev/null; then : + break 2 +fi +fi + done;; + esac + as_found=false +done +$as_found || { if { test -f "$SHELL" || test -f "$SHELL.exe"; } && + { $as_echo "$as_bourne_compatible""$as_required" | as_run=a "$SHELL"; } 2>/dev/null; then : + CONFIG_SHELL=$SHELL as_have_required=yes +fi; } +IFS=$as_save_IFS + + + if test "x$CONFIG_SHELL" != x; then : + export CONFIG_SHELL + # We cannot yet assume a decent shell, so we have to provide a +# neutralization value for shells without unset; and this also +# works around shells that cannot unset nonexistent variables. +# Preserve -v and -x to the replacement shell. +BASH_ENV=/dev/null +ENV=/dev/null +(unset BASH_ENV) >/dev/null 2>&1 && unset BASH_ENV ENV +case $- in @%:@ (((( + *v*x* | *x*v* ) as_opts=-vx ;; + *v* ) as_opts=-v ;; + *x* ) as_opts=-x ;; + * ) as_opts= ;; +esac +exec $CONFIG_SHELL $as_opts "$as_myself" ${1+"$@"} +# Admittedly, this is quite paranoid, since all the known shells bail +# out after a failed `exec'. +$as_echo "$0: could not re-execute with $CONFIG_SHELL" >&2 +exit 255 +fi + + if test x$as_have_required = xno; then : + $as_echo "$0: This script requires a shell more modern than all" + $as_echo "$0: the shells that I found on your system." + if test x${ZSH_VERSION+set} = xset ; then + $as_echo "$0: In particular, zsh $ZSH_VERSION has bugs and should" + $as_echo "$0: be upgraded to zsh 4.3.4 or later." + else + $as_echo "$0: Please tell bug-autoconf@gnu.org and +$0: maunt@linutronix.de about your system, including any +$0: error possibly output before this message. Then install +$0: a modern shell, or manually run the script under such a +$0: shell if you do have one." + fi + exit 1 +fi +fi +fi +SHELL=${CONFIG_SHELL-/bin/sh} +export SHELL +# Unset more variables known to interfere with behavior of common tools. +CLICOLOR_FORCE= GREP_OPTIONS= +unset CLICOLOR_FORCE GREP_OPTIONS + +## --------------------- ## +## M4sh Shell Functions. ## +## --------------------- ## +@%:@ as_fn_unset VAR +@%:@ --------------- +@%:@ Portably unset VAR. +as_fn_unset () +{ + { eval $1=; unset $1;} +} +as_unset=as_fn_unset + +@%:@ as_fn_set_status STATUS +@%:@ ----------------------- +@%:@ Set @S|@? to STATUS, without forking. +as_fn_set_status () +{ + return $1 +} @%:@ as_fn_set_status + +@%:@ as_fn_exit STATUS +@%:@ ----------------- +@%:@ Exit the shell with STATUS, even in a "trap 0" or "set -e" context. +as_fn_exit () +{ + set +e + as_fn_set_status $1 + exit $1 +} @%:@ as_fn_exit + +@%:@ as_fn_mkdir_p +@%:@ ------------- +@%:@ Create "@S|@as_dir" as a directory, including parents if necessary. +as_fn_mkdir_p () +{ + + case $as_dir in #( + -*) as_dir=./$as_dir;; + esac + test -d "$as_dir" || eval $as_mkdir_p || { + as_dirs= + while :; do + case $as_dir in #( + *\'*) as_qdir=`$as_echo "$as_dir" | sed "s/'/'\\\\\\\\''/g"`;; #'( + *) as_qdir=$as_dir;; + esac + as_dirs="'$as_qdir' $as_dirs" + as_dir=`$as_dirname -- "$as_dir" || +$as_expr X"$as_dir" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \ + X"$as_dir" : 'X\(//\)[^/]' \| \ + X"$as_dir" : 'X\(//\)$' \| \ + X"$as_dir" : 'X\(/\)' \| . 2>/dev/null || +$as_echo X"$as_dir" | + sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ + s//\1/ + q + } + /^X\(\/\/\)[^/].*/{ + s//\1/ + q + } + /^X\(\/\/\)$/{ + s//\1/ + q + } + /^X\(\/\).*/{ + s//\1/ + q + } + s/.*/./; q'` + test -d "$as_dir" && break + done + test -z "$as_dirs" || eval "mkdir $as_dirs" + } || test -d "$as_dir" || as_fn_error $? "cannot create directory $as_dir" + + +} @%:@ as_fn_mkdir_p + +@%:@ as_fn_executable_p FILE +@%:@ ----------------------- +@%:@ Test if FILE is an executable regular file. +as_fn_executable_p () +{ + test -f "$1" && test -x "$1" +} @%:@ as_fn_executable_p +@%:@ as_fn_append VAR VALUE +@%:@ ---------------------- +@%:@ Append the text in VALUE to the end of the definition contained in VAR. Take +@%:@ advantage of any shell optimizations that allow amortized linear growth over +@%:@ repeated appends, instead of the typical quadratic growth present in naive +@%:@ implementations. +if (eval "as_var=1; as_var+=2; test x\$as_var = x12") 2>/dev/null; then : + eval 'as_fn_append () + { + eval $1+=\$2 + }' +else + as_fn_append () + { + eval $1=\$$1\$2 + } +fi # as_fn_append + +@%:@ as_fn_arith ARG... +@%:@ ------------------ +@%:@ Perform arithmetic evaluation on the ARGs, and store the result in the +@%:@ global @S|@as_val. Take advantage of shells that can avoid forks. The arguments +@%:@ must be portable across @S|@(()) and expr. +if (eval "test \$(( 1 + 1 )) = 2") 2>/dev/null; then : + eval 'as_fn_arith () + { + as_val=$(( $* )) + }' +else + as_fn_arith () + { + as_val=`expr "$@" || test $? -eq 1` + } +fi # as_fn_arith + + +@%:@ as_fn_error STATUS ERROR [LINENO LOG_FD] +@%:@ ---------------------------------------- +@%:@ Output "`basename @S|@0`: error: ERROR" to stderr. If LINENO and LOG_FD are +@%:@ provided, also output the error to LOG_FD, referencing LINENO. Then exit the +@%:@ script with STATUS, using 1 if that was 0. +as_fn_error () +{ + as_status=$1; test $as_status -eq 0 && as_status=1 + if test "$4"; then + as_lineno=${as_lineno-"$3"} as_lineno_stack=as_lineno_stack=$as_lineno_stack + $as_echo "$as_me:${as_lineno-$LINENO}: error: $2" >&$4 + fi + $as_echo "$as_me: error: $2" >&2 + as_fn_exit $as_status +} @%:@ as_fn_error + +if expr a : '\(a\)' >/dev/null 2>&1 && + test "X`expr 00001 : '.*\(...\)'`" = X001; then + as_expr=expr +else + as_expr=false +fi + +if (basename -- /) >/dev/null 2>&1 && test "X`basename -- / 2>&1`" = "X/"; then + as_basename=basename +else + as_basename=false +fi + +if (as_dir=`dirname -- /` && test "X$as_dir" = X/) >/dev/null 2>&1; then + as_dirname=dirname +else + as_dirname=false +fi + +as_me=`$as_basename -- "$0" || +$as_expr X/"$0" : '.*/\([^/][^/]*\)/*$' \| \ + X"$0" : 'X\(//\)$' \| \ + X"$0" : 'X\(/\)' \| . 2>/dev/null || +$as_echo X/"$0" | + sed '/^.*\/\([^/][^/]*\)\/*$/{ + s//\1/ + q + } + /^X\/\(\/\/\)$/{ + s//\1/ + q + } + /^X\/\(\/\).*/{ + s//\1/ + q + } + s/.*/./; q'` + +# Avoid depending upon Character Ranges. +as_cr_letters='abcdefghijklmnopqrstuvwxyz' +as_cr_LETTERS='ABCDEFGHIJKLMNOPQRSTUVWXYZ' +as_cr_Letters=$as_cr_letters$as_cr_LETTERS +as_cr_digits='0123456789' +as_cr_alnum=$as_cr_Letters$as_cr_digits + + + as_lineno_1=$LINENO as_lineno_1a=$LINENO + as_lineno_2=$LINENO as_lineno_2a=$LINENO + eval 'test "x$as_lineno_1'$as_run'" != "x$as_lineno_2'$as_run'" && + test "x`expr $as_lineno_1'$as_run' + 1`" = "x$as_lineno_2'$as_run'"' || { + # Blame Lee E. McMahon (1931-1989) for sed's syntax. :-) + sed -n ' + p + /[$]LINENO/= + ' <$as_myself | + sed ' + s/[$]LINENO.*/&-/ + t lineno + b + :lineno + N + :loop + s/[$]LINENO\([^'$as_cr_alnum'_].*\n\)\(.*\)/\2\1\2/ + t loop + s/-\n.*// + ' >$as_me.lineno && + chmod +x "$as_me.lineno" || + { $as_echo "$as_me: error: cannot create $as_me.lineno; rerun with a POSIX shell" >&2; as_fn_exit 1; } + + # If we had to re-execute with $CONFIG_SHELL, we're ensured to have + # already done that, so ensure we don't try to do so again and fall + # in an infinite loop. This has already happened in practice. + _as_can_reexec=no; export _as_can_reexec + # Don't try to exec as it changes $[0], causing all sort of problems + # (the dirname of $[0] is not the place where we might find the + # original and so on. Autoconf is especially sensitive to this). + . "./$as_me.lineno" + # Exit status is that of the last command. + exit +} + +ECHO_C= ECHO_N= ECHO_T= +case `echo -n x` in @%:@((((( +-n*) + case `echo 'xy\c'` in + *c*) ECHO_T=' ';; # ECHO_T is single tab character. + xy) ECHO_C='\c';; + *) echo `echo ksh88 bug on AIX 6.1` > /dev/null + ECHO_T=' ';; + esac;; +*) + ECHO_N='-n';; +esac + +rm -f conf$$ conf$$.exe conf$$.file +if test -d conf$$.dir; then + rm -f conf$$.dir/conf$$.file +else + rm -f conf$$.dir + mkdir conf$$.dir 2>/dev/null +fi +if (echo >conf$$.file) 2>/dev/null; then + if ln -s conf$$.file conf$$ 2>/dev/null; then + as_ln_s='ln -s' + # ... but there are two gotchas: + # 1) On MSYS, both `ln -s file dir' and `ln file dir' fail. + # 2) DJGPP < 2.04 has no symlinks; `ln -s' creates a wrapper executable. + # In both cases, we have to default to `cp -pR'. + ln -s conf$$.file conf$$.dir 2>/dev/null && test ! -f conf$$.exe || + as_ln_s='cp -pR' + elif ln conf$$.file conf$$ 2>/dev/null; then + as_ln_s=ln + else + as_ln_s='cp -pR' + fi +else + as_ln_s='cp -pR' +fi +rm -f conf$$ conf$$.exe conf$$.dir/conf$$.file conf$$.file +rmdir conf$$.dir 2>/dev/null + +if mkdir -p . 2>/dev/null; then + as_mkdir_p='mkdir -p "$as_dir"' +else + test -d ./-p && rmdir ./-p + as_mkdir_p=false +fi + +as_test_x='test -x' +as_executable_p=as_fn_executable_p + +# Sed expression to map a string onto a valid CPP name. +as_tr_cpp="eval sed 'y%*$as_cr_letters%P$as_cr_LETTERS%;s%[^_$as_cr_alnum]%_%g'" + +# Sed expression to map a string onto a valid variable name. +as_tr_sh="eval sed 'y%*+%pp%;s%[^_$as_cr_alnum]%_%g'" + + +test -n "$DJDIR" || exec 7<&0 &1 + +# Name of the host. +# hostname on some systems (SVR3.2, old GNU/Linux) returns a bogus exit status, +# so uname gets run too. +ac_hostname=`(hostname || uname -n) 2>/dev/null | sed 1q` + +# +# Initializations. +# +ac_default_prefix=/usr/local +ac_clean_files= +ac_config_libobj_dir=. +LIB@&t@OBJS= +cross_compiling=no +subdirs= +MFLAGS= +MAKEFLAGS= + +# Identity of this package. +PACKAGE_NAME='autohello' +PACKAGE_TARNAME='autohello' +PACKAGE_VERSION='1.1' +PACKAGE_STRING='autohello 1.1' +PACKAGE_BUGREPORT='maunt@linutronix.de' +PACKAGE_URL='' + +ac_unique_file="autohello.c" +ac_subst_vars='am__EXEEXT_FALSE +am__EXEEXT_TRUE +LTLIBOBJS +LIB@&t@OBJS +am__fastdepCC_FALSE +am__fastdepCC_TRUE +CCDEPMODE +am__nodep +AMDEPBACKSLASH +AMDEP_FALSE +AMDEP_TRUE +am__quote +am__include +DEPDIR +OBJEXT +EXEEXT +ac_ct_CC +CPPFLAGS +LDFLAGS +CFLAGS +CC +AM_BACKSLASH +AM_DEFAULT_VERBOSITY +AM_DEFAULT_V +AM_V +am__untar +am__tar +AMTAR +am__leading_dot +SET_MAKE +AWK +mkdir_p +MKDIR_P +INSTALL_STRIP_PROGRAM +STRIP +install_sh +MAKEINFO +AUTOHEADER +AUTOMAKE +AUTOCONF +ACLOCAL +VERSION +PACKAGE +CYGPATH_W +am__isrc +INSTALL_DATA +INSTALL_SCRIPT +INSTALL_PROGRAM +target_alias +host_alias +build_alias +LIBS +ECHO_T +ECHO_N +ECHO_C +DEFS +mandir +localedir +libdir +psdir +pdfdir +dvidir +htmldir +infodir +docdir +oldincludedir +includedir +localstatedir +sharedstatedir +sysconfdir +datadir +datarootdir +libexecdir +sbindir +bindir +program_transform_name +prefix +exec_prefix +PACKAGE_URL +PACKAGE_BUGREPORT +PACKAGE_STRING +PACKAGE_VERSION +PACKAGE_TARNAME +PACKAGE_NAME +PATH_SEPARATOR +SHELL' +ac_subst_files='' +ac_user_opts=' +enable_option_checking +enable_silent_rules +enable_dependency_tracking +' + ac_precious_vars='build_alias +host_alias +target_alias +CC +CFLAGS +LDFLAGS +LIBS +CPPFLAGS' + + +# Initialize some variables set by options. +ac_init_help= +ac_init_version=false +ac_unrecognized_opts= +ac_unrecognized_sep= +# The variables have the same names as the options, with +# dashes changed to underlines. +cache_file=/dev/null +exec_prefix=NONE +no_create= +no_recursion= +prefix=NONE +program_prefix=NONE +program_suffix=NONE +program_transform_name=s,x,x, +silent= +site= +srcdir= +verbose= +x_includes=NONE +x_libraries=NONE + +# Installation directory options. +# These are left unexpanded so users can "make install exec_prefix=/foo" +# and all the variables that are supposed to be based on exec_prefix +# by default will actually change. +# Use braces instead of parens because sh, perl, etc. also accept them. +# (The list follows the same order as the GNU Coding Standards.) +bindir='${exec_prefix}/bin' +sbindir='${exec_prefix}/sbin' +libexecdir='${exec_prefix}/libexec' +datarootdir='${prefix}/share' +datadir='${datarootdir}' +sysconfdir='${prefix}/etc' +sharedstatedir='${prefix}/com' +localstatedir='${prefix}/var' +includedir='${prefix}/include' +oldincludedir='/usr/include' +docdir='${datarootdir}/doc/${PACKAGE_TARNAME}' +infodir='${datarootdir}/info' +htmldir='${docdir}' +dvidir='${docdir}' +pdfdir='${docdir}' +psdir='${docdir}' +libdir='${exec_prefix}/lib' +localedir='${datarootdir}/locale' +mandir='${datarootdir}/man' + +ac_prev= +ac_dashdash= +for ac_option +do + # If the previous option needs an argument, assign it. + if test -n "$ac_prev"; then + eval $ac_prev=\$ac_option + ac_prev= + continue + fi + + case $ac_option in + *=?*) ac_optarg=`expr "X$ac_option" : '[^=]*=\(.*\)'` ;; + *=) ac_optarg= ;; + *) ac_optarg=yes ;; + esac + + # Accept the important Cygnus configure options, so we can diagnose typos. + + case $ac_dashdash$ac_option in + --) + ac_dashdash=yes ;; + + -bindir | --bindir | --bindi | --bind | --bin | --bi) + ac_prev=bindir ;; + -bindir=* | --bindir=* | --bindi=* | --bind=* | --bin=* | --bi=*) + bindir=$ac_optarg ;; + + -build | --build | --buil | --bui | --bu) + ac_prev=build_alias ;; + -build=* | --build=* | --buil=* | --bui=* | --bu=*) + build_alias=$ac_optarg ;; + + -cache-file | --cache-file | --cache-fil | --cache-fi \ + | --cache-f | --cache- | --cache | --cach | --cac | --ca | --c) + ac_prev=cache_file ;; + -cache-file=* | --cache-file=* | --cache-fil=* | --cache-fi=* \ + | --cache-f=* | --cache-=* | --cache=* | --cach=* | --cac=* | --ca=* | --c=*) + cache_file=$ac_optarg ;; + + --config-cache | -C) + cache_file=config.cache ;; + + -datadir | --datadir | --datadi | --datad) + ac_prev=datadir ;; + -datadir=* | --datadir=* | --datadi=* | --datad=*) + datadir=$ac_optarg ;; + + -datarootdir | --datarootdir | --datarootdi | --datarootd | --dataroot \ + | --dataroo | --dataro | --datar) + ac_prev=datarootdir ;; + -datarootdir=* | --datarootdir=* | --datarootdi=* | --datarootd=* \ + | --dataroot=* | --dataroo=* | --dataro=* | --datar=*) + datarootdir=$ac_optarg ;; + + -disable-* | --disable-*) + ac_useropt=`expr "x$ac_option" : 'x-*disable-\(.*\)'` + # Reject names that are not valid shell variable names. + expr "x$ac_useropt" : ".*[^-+._$as_cr_alnum]" >/dev/null && + as_fn_error $? "invalid feature name: $ac_useropt" + ac_useropt_orig=$ac_useropt + ac_useropt=`$as_echo "$ac_useropt" | sed 's/[-+.]/_/g'` + case $ac_user_opts in + *" +"enable_$ac_useropt" +"*) ;; + *) ac_unrecognized_opts="$ac_unrecognized_opts$ac_unrecognized_sep--disable-$ac_useropt_orig" + ac_unrecognized_sep=', ';; + esac + eval enable_$ac_useropt=no ;; + + -docdir | --docdir | --docdi | --doc | --do) + ac_prev=docdir ;; + -docdir=* | --docdir=* | --docdi=* | --doc=* | --do=*) + docdir=$ac_optarg ;; + + -dvidir | --dvidir | --dvidi | --dvid | --dvi | --dv) + ac_prev=dvidir ;; + -dvidir=* | --dvidir=* | --dvidi=* | --dvid=* | --dvi=* | --dv=*) + dvidir=$ac_optarg ;; + + -enable-* | --enable-*) + ac_useropt=`expr "x$ac_option" : 'x-*enable-\([^=]*\)'` + # Reject names that are not valid shell variable names. + expr "x$ac_useropt" : ".*[^-+._$as_cr_alnum]" >/dev/null && + as_fn_error $? "invalid feature name: $ac_useropt" + ac_useropt_orig=$ac_useropt + ac_useropt=`$as_echo "$ac_useropt" | sed 's/[-+.]/_/g'` + case $ac_user_opts in + *" +"enable_$ac_useropt" +"*) ;; + *) ac_unrecognized_opts="$ac_unrecognized_opts$ac_unrecognized_sep--enable-$ac_useropt_orig" + ac_unrecognized_sep=', ';; + esac + eval enable_$ac_useropt=\$ac_optarg ;; + + -exec-prefix | --exec_prefix | --exec-prefix | --exec-prefi \ + | --exec-pref | --exec-pre | --exec-pr | --exec-p | --exec- \ + | --exec | --exe | --ex) + ac_prev=exec_prefix ;; + -exec-prefix=* | --exec_prefix=* | --exec-prefix=* | --exec-prefi=* \ + | --exec-pref=* | --exec-pre=* | --exec-pr=* | --exec-p=* | --exec-=* \ + | --exec=* | --exe=* | --ex=*) + exec_prefix=$ac_optarg ;; + + -gas | --gas | --ga | --g) + # Obsolete; use --with-gas. + with_gas=yes ;; + + -help | --help | --hel | --he | -h) + ac_init_help=long ;; + -help=r* | --help=r* | --hel=r* | --he=r* | -hr*) + ac_init_help=recursive ;; + -help=s* | --help=s* | --hel=s* | --he=s* | -hs*) + ac_init_help=short ;; + + -host | --host | --hos | --ho) + ac_prev=host_alias ;; + -host=* | --host=* | --hos=* | --ho=*) + host_alias=$ac_optarg ;; + + -htmldir | --htmldir | --htmldi | --htmld | --html | --htm | --ht) + ac_prev=htmldir ;; + -htmldir=* | --htmldir=* | --htmldi=* | --htmld=* | --html=* | --htm=* \ + | --ht=*) + htmldir=$ac_optarg ;; + + -includedir | --includedir | --includedi | --included | --include \ + | --includ | --inclu | --incl | --inc) + ac_prev=includedir ;; + -includedir=* | --includedir=* | --includedi=* | --included=* | --include=* \ + | --includ=* | --inclu=* | --incl=* | --inc=*) + includedir=$ac_optarg ;; + + -infodir | --infodir | --infodi | --infod | --info | --inf) + ac_prev=infodir ;; + -infodir=* | --infodir=* | --infodi=* | --infod=* | --info=* | --inf=*) + infodir=$ac_optarg ;; + + -libdir | --libdir | --libdi | --libd) + ac_prev=libdir ;; + -libdir=* | --libdir=* | --libdi=* | --libd=*) + libdir=$ac_optarg ;; + + -libexecdir | --libexecdir | --libexecdi | --libexecd | --libexec \ + | --libexe | --libex | --libe) + ac_prev=libexecdir ;; + -libexecdir=* | --libexecdir=* | --libexecdi=* | --libexecd=* | --libexec=* \ + | --libexe=* | --libex=* | --libe=*) + libexecdir=$ac_optarg ;; + + -localedir | --localedir | --localedi | --localed | --locale) + ac_prev=localedir ;; + -localedir=* | --localedir=* | --localedi=* | --localed=* | --locale=*) + localedir=$ac_optarg ;; + + -localstatedir | --localstatedir | --localstatedi | --localstated \ + | --localstate | --localstat | --localsta | --localst | --locals) + ac_prev=localstatedir ;; + -localstatedir=* | --localstatedir=* | --localstatedi=* | --localstated=* \ + | --localstate=* | --localstat=* | --localsta=* | --localst=* | --locals=*) + localstatedir=$ac_optarg ;; + + -mandir | --mandir | --mandi | --mand | --man | --ma | --m) + ac_prev=mandir ;; + -mandir=* | --mandir=* | --mandi=* | --mand=* | --man=* | --ma=* | --m=*) + mandir=$ac_optarg ;; + + -nfp | --nfp | --nf) + # Obsolete; use --without-fp. + with_fp=no ;; + + -no-create | --no-create | --no-creat | --no-crea | --no-cre \ + | --no-cr | --no-c | -n) + no_create=yes ;; + + -no-recursion | --no-recursion | --no-recursio | --no-recursi \ + | --no-recurs | --no-recur | --no-recu | --no-rec | --no-re | --no-r) + no_recursion=yes ;; + + -oldincludedir | --oldincludedir | --oldincludedi | --oldincluded \ + | --oldinclude | --oldinclud | --oldinclu | --oldincl | --oldinc \ + | --oldin | --oldi | --old | --ol | --o) + ac_prev=oldincludedir ;; + -oldincludedir=* | --oldincludedir=* | --oldincludedi=* | --oldincluded=* \ + | --oldinclude=* | --oldinclud=* | --oldinclu=* | --oldincl=* | --oldinc=* \ + | --oldin=* | --oldi=* | --old=* | --ol=* | --o=*) + oldincludedir=$ac_optarg ;; + + -prefix | --prefix | --prefi | --pref | --pre | --pr | --p) + ac_prev=prefix ;; + -prefix=* | --prefix=* | --prefi=* | --pref=* | --pre=* | --pr=* | --p=*) + prefix=$ac_optarg ;; + + -program-prefix | --program-prefix | --program-prefi | --program-pref \ + | --program-pre | --program-pr | --program-p) + ac_prev=program_prefix ;; + -program-prefix=* | --program-prefix=* | --program-prefi=* \ + | --program-pref=* | --program-pre=* | --program-pr=* | --program-p=*) + program_prefix=$ac_optarg ;; + + -program-suffix | --program-suffix | --program-suffi | --program-suff \ + | --program-suf | --program-su | --program-s) + ac_prev=program_suffix ;; + -program-suffix=* | --program-suffix=* | --program-suffi=* \ + | --program-suff=* | --program-suf=* | --program-su=* | --program-s=*) + program_suffix=$ac_optarg ;; + + -program-transform-name | --program-transform-name \ + | --program-transform-nam | --program-transform-na \ + | --program-transform-n | --program-transform- \ + | --program-transform | --program-transfor \ + | --program-transfo | --program-transf \ + | --program-trans | --program-tran \ + | --progr-tra | --program-tr | --program-t) + ac_prev=program_transform_name ;; + -program-transform-name=* | --program-transform-name=* \ + | --program-transform-nam=* | --program-transform-na=* \ + | --program-transform-n=* | --program-transform-=* \ + | --program-transform=* | --program-transfor=* \ + | --program-transfo=* | --program-transf=* \ + | --program-trans=* | --program-tran=* \ + | --progr-tra=* | --program-tr=* | --program-t=*) + program_transform_name=$ac_optarg ;; + + -pdfdir | --pdfdir | --pdfdi | --pdfd | --pdf | --pd) + ac_prev=pdfdir ;; + -pdfdir=* | --pdfdir=* | --pdfdi=* | --pdfd=* | --pdf=* | --pd=*) + pdfdir=$ac_optarg ;; + + -psdir | --psdir | --psdi | --psd | --ps) + ac_prev=psdir ;; + -psdir=* | --psdir=* | --psdi=* | --psd=* | --ps=*) + psdir=$ac_optarg ;; + + -q | -quiet | --quiet | --quie | --qui | --qu | --q \ + | -silent | --silent | --silen | --sile | --sil) + silent=yes ;; + + -sbindir | --sbindir | --sbindi | --sbind | --sbin | --sbi | --sb) + ac_prev=sbindir ;; + -sbindir=* | --sbindir=* | --sbindi=* | --sbind=* | --sbin=* \ + | --sbi=* | --sb=*) + sbindir=$ac_optarg ;; + + -sharedstatedir | --sharedstatedir | --sharedstatedi \ + | --sharedstated | --sharedstate | --sharedstat | --sharedsta \ + | --sharedst | --shareds | --shared | --share | --shar \ + | --sha | --sh) + ac_prev=sharedstatedir ;; + -sharedstatedir=* | --sharedstatedir=* | --sharedstatedi=* \ + | --sharedstated=* | --sharedstate=* | --sharedstat=* | --sharedsta=* \ + | --sharedst=* | --shareds=* | --shared=* | --share=* | --shar=* \ + | --sha=* | --sh=*) + sharedstatedir=$ac_optarg ;; + + -site | --site | --sit) + ac_prev=site ;; + -site=* | --site=* | --sit=*) + site=$ac_optarg ;; + + -srcdir | --srcdir | --srcdi | --srcd | --src | --sr) + ac_prev=srcdir ;; + -srcdir=* | --srcdir=* | --srcdi=* | --srcd=* | --src=* | --sr=*) + srcdir=$ac_optarg ;; + + -sysconfdir | --sysconfdir | --sysconfdi | --sysconfd | --sysconf \ + | --syscon | --sysco | --sysc | --sys | --sy) + ac_prev=sysconfdir ;; + -sysconfdir=* | --sysconfdir=* | --sysconfdi=* | --sysconfd=* | --sysconf=* \ + | --syscon=* | --sysco=* | --sysc=* | --sys=* | --sy=*) + sysconfdir=$ac_optarg ;; + + -target | --target | --targe | --targ | --tar | --ta | --t) + ac_prev=target_alias ;; + -target=* | --target=* | --targe=* | --targ=* | --tar=* | --ta=* | --t=*) + target_alias=$ac_optarg ;; + + -v | -verbose | --verbose | --verbos | --verbo | --verb) + verbose=yes ;; + + -version | --version | --versio | --versi | --vers | -V) + ac_init_version=: ;; + + -with-* | --with-*) + ac_useropt=`expr "x$ac_option" : 'x-*with-\([^=]*\)'` + # Reject names that are not valid shell variable names. + expr "x$ac_useropt" : ".*[^-+._$as_cr_alnum]" >/dev/null && + as_fn_error $? "invalid package name: $ac_useropt" + ac_useropt_orig=$ac_useropt + ac_useropt=`$as_echo "$ac_useropt" | sed 's/[-+.]/_/g'` + case $ac_user_opts in + *" +"with_$ac_useropt" +"*) ;; + *) ac_unrecognized_opts="$ac_unrecognized_opts$ac_unrecognized_sep--with-$ac_useropt_orig" + ac_unrecognized_sep=', ';; + esac + eval with_$ac_useropt=\$ac_optarg ;; + + -without-* | --without-*) + ac_useropt=`expr "x$ac_option" : 'x-*without-\(.*\)'` + # Reject names that are not valid shell variable names. + expr "x$ac_useropt" : ".*[^-+._$as_cr_alnum]" >/dev/null && + as_fn_error $? "invalid package name: $ac_useropt" + ac_useropt_orig=$ac_useropt + ac_useropt=`$as_echo "$ac_useropt" | sed 's/[-+.]/_/g'` + case $ac_user_opts in + *" +"with_$ac_useropt" +"*) ;; + *) ac_unrecognized_opts="$ac_unrecognized_opts$ac_unrecognized_sep--without-$ac_useropt_orig" + ac_unrecognized_sep=', ';; + esac + eval with_$ac_useropt=no ;; + + --x) + # Obsolete; use --with-x. + with_x=yes ;; + + -x-includes | --x-includes | --x-include | --x-includ | --x-inclu \ + | --x-incl | --x-inc | --x-in | --x-i) + ac_prev=x_includes ;; + -x-includes=* | --x-includes=* | --x-include=* | --x-includ=* | --x-inclu=* \ + | --x-incl=* | --x-inc=* | --x-in=* | --x-i=*) + x_includes=$ac_optarg ;; + + -x-libraries | --x-libraries | --x-librarie | --x-librari \ + | --x-librar | --x-libra | --x-libr | --x-lib | --x-li | --x-l) + ac_prev=x_libraries ;; + -x-libraries=* | --x-libraries=* | --x-librarie=* | --x-librari=* \ + | --x-librar=* | --x-libra=* | --x-libr=* | --x-lib=* | --x-li=* | --x-l=*) + x_libraries=$ac_optarg ;; + + -*) as_fn_error $? "unrecognized option: \`$ac_option' +Try \`$0 --help' for more information" + ;; + + *=*) + ac_envvar=`expr "x$ac_option" : 'x\([^=]*\)='` + # Reject names that are not valid shell variable names. + case $ac_envvar in #( + '' | [0-9]* | *[!_$as_cr_alnum]* ) + as_fn_error $? "invalid variable name: \`$ac_envvar'" ;; + esac + eval $ac_envvar=\$ac_optarg + export $ac_envvar ;; + + *) + # FIXME: should be removed in autoconf 3.0. + $as_echo "$as_me: WARNING: you should use --build, --host, --target" >&2 + expr "x$ac_option" : ".*[^-._$as_cr_alnum]" >/dev/null && + $as_echo "$as_me: WARNING: invalid host type: $ac_option" >&2 + : "${build_alias=$ac_option} ${host_alias=$ac_option} ${target_alias=$ac_option}" + ;; + + esac +done + +if test -n "$ac_prev"; then + ac_option=--`echo $ac_prev | sed 's/_/-/g'` + as_fn_error $? "missing argument to $ac_option" +fi + +if test -n "$ac_unrecognized_opts"; then + case $enable_option_checking in + no) ;; + fatal) as_fn_error $? "unrecognized options: $ac_unrecognized_opts" ;; + *) $as_echo "$as_me: WARNING: unrecognized options: $ac_unrecognized_opts" >&2 ;; + esac +fi + +# Check all directory arguments for consistency. +for ac_var in exec_prefix prefix bindir sbindir libexecdir datarootdir \ + datadir sysconfdir sharedstatedir localstatedir includedir \ + oldincludedir docdir infodir htmldir dvidir pdfdir psdir \ + libdir localedir mandir +do + eval ac_val=\$$ac_var + # Remove trailing slashes. + case $ac_val in + */ ) + ac_val=`expr "X$ac_val" : 'X\(.*[^/]\)' \| "X$ac_val" : 'X\(.*\)'` + eval $ac_var=\$ac_val;; + esac + # Be sure to have absolute directory names. + case $ac_val in + [\\/$]* | ?:[\\/]* ) continue;; + NONE | '' ) case $ac_var in *prefix ) continue;; esac;; + esac + as_fn_error $? "expected an absolute directory name for --$ac_var: $ac_val" +done + +# There might be people who depend on the old broken behavior: `$host' +# used to hold the argument of --host etc. +# FIXME: To remove some day. +build=$build_alias +host=$host_alias +target=$target_alias + +# FIXME: To remove some day. +if test "x$host_alias" != x; then + if test "x$build_alias" = x; then + cross_compiling=maybe + elif test "x$build_alias" != "x$host_alias"; then + cross_compiling=yes + fi +fi + +ac_tool_prefix= +test -n "$host_alias" && ac_tool_prefix=$host_alias- + +test "$silent" = yes && exec 6>/dev/null + + +ac_pwd=`pwd` && test -n "$ac_pwd" && +ac_ls_di=`ls -di .` && +ac_pwd_ls_di=`cd "$ac_pwd" && ls -di .` || + as_fn_error $? "working directory cannot be determined" +test "X$ac_ls_di" = "X$ac_pwd_ls_di" || + as_fn_error $? "pwd does not report name of working directory" + + +# Find the source files, if location was not specified. +if test -z "$srcdir"; then + ac_srcdir_defaulted=yes + # Try the directory containing this script, then the parent directory. + ac_confdir=`$as_dirname -- "$as_myself" || +$as_expr X"$as_myself" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \ + X"$as_myself" : 'X\(//\)[^/]' \| \ + X"$as_myself" : 'X\(//\)$' \| \ + X"$as_myself" : 'X\(/\)' \| . 2>/dev/null || +$as_echo X"$as_myself" | + sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ + s//\1/ + q + } + /^X\(\/\/\)[^/].*/{ + s//\1/ + q + } + /^X\(\/\/\)$/{ + s//\1/ + q + } + /^X\(\/\).*/{ + s//\1/ + q + } + s/.*/./; q'` + srcdir=$ac_confdir + if test ! -r "$srcdir/$ac_unique_file"; then + srcdir=.. + fi +else + ac_srcdir_defaulted=no +fi +if test ! -r "$srcdir/$ac_unique_file"; then + test "$ac_srcdir_defaulted" = yes && srcdir="$ac_confdir or .." + as_fn_error $? "cannot find sources ($ac_unique_file) in $srcdir" +fi +ac_msg="sources are in $srcdir, but \`cd $srcdir' does not work" +ac_abs_confdir=`( + cd "$srcdir" && test -r "./$ac_unique_file" || as_fn_error $? "$ac_msg" + pwd)` +# When building in place, set srcdir=. +if test "$ac_abs_confdir" = "$ac_pwd"; then + srcdir=. +fi +# Remove unnecessary trailing slashes from srcdir. +# Double slashes in file names in object file debugging info +# mess up M-x gdb in Emacs. +case $srcdir in +*/) srcdir=`expr "X$srcdir" : 'X\(.*[^/]\)' \| "X$srcdir" : 'X\(.*\)'`;; +esac +for ac_var in $ac_precious_vars; do + eval ac_env_${ac_var}_set=\${${ac_var}+set} + eval ac_env_${ac_var}_value=\$${ac_var} + eval ac_cv_env_${ac_var}_set=\${${ac_var}+set} + eval ac_cv_env_${ac_var}_value=\$${ac_var} +done + +# +# Report the --help message. +# +if test "$ac_init_help" = "long"; then + # Omit some internal or obsolete options to make the list less imposing. + # This message is too long to be a string in the A/UX 3.1 sh. + cat <<_ACEOF +\`configure' configures autohello 1.1 to adapt to many kinds of systems. + +Usage: $0 [OPTION]... [VAR=VALUE]... + +To assign environment variables (e.g., CC, CFLAGS...), specify them as +VAR=VALUE. See below for descriptions of some of the useful variables. + +Defaults for the options are specified in brackets. + +Configuration: + -h, --help display this help and exit + --help=short display options specific to this package + --help=recursive display the short help of all the included packages + -V, --version display version information and exit + -q, --quiet, --silent do not print \`checking ...' messages + --cache-file=FILE cache test results in FILE [disabled] + -C, --config-cache alias for \`--cache-file=config.cache' + -n, --no-create do not create output files + --srcdir=DIR find the sources in DIR [configure dir or \`..'] + +Installation directories: + --prefix=PREFIX install architecture-independent files in PREFIX + @<:@@S|@ac_default_prefix@:>@ + --exec-prefix=EPREFIX install architecture-dependent files in EPREFIX + @<:@PREFIX@:>@ + +By default, \`make install' will install all the files in +\`$ac_default_prefix/bin', \`$ac_default_prefix/lib' etc. You can specify +an installation prefix other than \`$ac_default_prefix' using \`--prefix', +for instance \`--prefix=\$HOME'. + +For better control, use the options below. + +Fine tuning of the installation directories: + --bindir=DIR user executables [EPREFIX/bin] + --sbindir=DIR system admin executables [EPREFIX/sbin] + --libexecdir=DIR program executables [EPREFIX/libexec] + --sysconfdir=DIR read-only single-machine data [PREFIX/etc] + --sharedstatedir=DIR modifiable architecture-independent data [PREFIX/com] + --localstatedir=DIR modifiable single-machine data [PREFIX/var] + --libdir=DIR object code libraries [EPREFIX/lib] + --includedir=DIR C header files [PREFIX/include] + --oldincludedir=DIR C header files for non-gcc [/usr/include] + --datarootdir=DIR read-only arch.-independent data root [PREFIX/share] + --datadir=DIR read-only architecture-independent data [DATAROOTDIR] + --infodir=DIR info documentation [DATAROOTDIR/info] + --localedir=DIR locale-dependent data [DATAROOTDIR/locale] + --mandir=DIR man documentation [DATAROOTDIR/man] + --docdir=DIR documentation root @<:@DATAROOTDIR/doc/autohello@:>@ + --htmldir=DIR html documentation [DOCDIR] + --dvidir=DIR dvi documentation [DOCDIR] + --pdfdir=DIR pdf documentation [DOCDIR] + --psdir=DIR ps documentation [DOCDIR] +_ACEOF + + cat <<\_ACEOF + +Program names: + --program-prefix=PREFIX prepend PREFIX to installed program names + --program-suffix=SUFFIX append SUFFIX to installed program names + --program-transform-name=PROGRAM run sed PROGRAM on installed program names +_ACEOF +fi + +if test -n "$ac_init_help"; then + case $ac_init_help in + short | recursive ) echo "Configuration of autohello 1.1:";; + esac + cat <<\_ACEOF + +Optional Features: + --disable-option-checking ignore unrecognized --enable/--with options + --disable-FEATURE do not include FEATURE (same as --enable-FEATURE=no) + --enable-FEATURE[=ARG] include FEATURE [ARG=yes] + --enable-silent-rules less verbose build output (undo: "make V=1") + --disable-silent-rules verbose build output (undo: "make V=0") + --enable-dependency-tracking + do not reject slow dependency extractors + --disable-dependency-tracking + speeds up one-time build + +Some influential environment variables: + CC C compiler command + CFLAGS C compiler flags + LDFLAGS linker flags, e.g. -L if you have libraries in a + nonstandard directory + LIBS libraries to pass to the linker, e.g. -l + CPPFLAGS (Objective) C/C++ preprocessor flags, e.g. -I if + you have headers in a nonstandard directory + +Use these variables to override the choices made by `configure' or to help +it to find libraries and programs with nonstandard names/locations. + +Report bugs to . +_ACEOF +ac_status=$? +fi + +if test "$ac_init_help" = "recursive"; then + # If there are subdirs, report their specific --help. + for ac_dir in : $ac_subdirs_all; do test "x$ac_dir" = x: && continue + test -d "$ac_dir" || + { cd "$srcdir" && ac_pwd=`pwd` && srcdir=. && test -d "$ac_dir"; } || + continue + ac_builddir=. + +case "$ac_dir" in +.) ac_dir_suffix= ac_top_builddir_sub=. ac_top_build_prefix= ;; +*) + ac_dir_suffix=/`$as_echo "$ac_dir" | sed 's|^\.[\\/]||'` + # A ".." for each directory in $ac_dir_suffix. + ac_top_builddir_sub=`$as_echo "$ac_dir_suffix" | sed 's|/[^\\/]*|/..|g;s|/||'` + case $ac_top_builddir_sub in + "") ac_top_builddir_sub=. ac_top_build_prefix= ;; + *) ac_top_build_prefix=$ac_top_builddir_sub/ ;; + esac ;; +esac +ac_abs_top_builddir=$ac_pwd +ac_abs_builddir=$ac_pwd$ac_dir_suffix +# for backward compatibility: +ac_top_builddir=$ac_top_build_prefix + +case $srcdir in + .) # We are building in place. + ac_srcdir=. + ac_top_srcdir=$ac_top_builddir_sub + ac_abs_top_srcdir=$ac_pwd ;; + [\\/]* | ?:[\\/]* ) # Absolute name. + ac_srcdir=$srcdir$ac_dir_suffix; + ac_top_srcdir=$srcdir + ac_abs_top_srcdir=$srcdir ;; + *) # Relative name. + ac_srcdir=$ac_top_build_prefix$srcdir$ac_dir_suffix + ac_top_srcdir=$ac_top_build_prefix$srcdir + ac_abs_top_srcdir=$ac_pwd/$srcdir ;; +esac +ac_abs_srcdir=$ac_abs_top_srcdir$ac_dir_suffix + + cd "$ac_dir" || { ac_status=$?; continue; } + # Check for guested configure. + if test -f "$ac_srcdir/configure.gnu"; then + echo && + $SHELL "$ac_srcdir/configure.gnu" --help=recursive + elif test -f "$ac_srcdir/configure"; then + echo && + $SHELL "$ac_srcdir/configure" --help=recursive + else + $as_echo "$as_me: WARNING: no configuration information is in $ac_dir" >&2 + fi || ac_status=$? + cd "$ac_pwd" || { ac_status=$?; break; } + done +fi + +test -n "$ac_init_help" && exit $ac_status +if $ac_init_version; then + cat <<\_ACEOF +autohello configure 1.1 +generated by GNU Autoconf 2.69 + +Copyright (C) 2012 Free Software Foundation, Inc. +This configure script is free software; the Free Software Foundation +gives unlimited permission to copy, distribute and modify it. +_ACEOF + exit +fi + +## ------------------------ ## +## Autoconf initialization. ## +## ------------------------ ## + +@%:@ ac_fn_c_try_compile LINENO +@%:@ -------------------------- +@%:@ Try to compile conftest.@S|@ac_ext, and return whether this succeeded. +ac_fn_c_try_compile () +{ + as_lineno=${as_lineno-"$1"} as_lineno_stack=as_lineno_stack=$as_lineno_stack + rm -f conftest.$ac_objext + if { { ac_try="$ac_compile" +case "(($ac_try" in + *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; + *) ac_try_echo=$ac_try;; +esac +eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\"" +$as_echo "$ac_try_echo"; } >&5 + (eval "$ac_compile") 2>conftest.err + ac_status=$? + if test -s conftest.err; then + grep -v '^ *+' conftest.err >conftest.er1 + cat conftest.er1 >&5 + mv -f conftest.er1 conftest.err + fi + $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 + test $ac_status = 0; } && { + test -z "$ac_c_werror_flag" || + test ! -s conftest.err + } && test -s conftest.$ac_objext; then : + ac_retval=0 +else + $as_echo "$as_me: failed program was:" >&5 +sed 's/^/| /' conftest.$ac_ext >&5 + + ac_retval=1 +fi + eval $as_lineno_stack; ${as_lineno_stack:+:} unset as_lineno + as_fn_set_status $ac_retval + +} @%:@ ac_fn_c_try_compile +cat >config.log <<_ACEOF +This file contains any messages produced by compilers while +running configure, to aid debugging if configure makes a mistake. + +It was created by autohello $as_me 1.1, which was +generated by GNU Autoconf 2.69. Invocation command line was + + $ $0 $@ + +_ACEOF +exec 5>>config.log +{ +cat <<_ASUNAME +## --------- ## +## Platform. ## +## --------- ## + +hostname = `(hostname || uname -n) 2>/dev/null | sed 1q` +uname -m = `(uname -m) 2>/dev/null || echo unknown` +uname -r = `(uname -r) 2>/dev/null || echo unknown` +uname -s = `(uname -s) 2>/dev/null || echo unknown` +uname -v = `(uname -v) 2>/dev/null || echo unknown` + +/usr/bin/uname -p = `(/usr/bin/uname -p) 2>/dev/null || echo unknown` +/bin/uname -X = `(/bin/uname -X) 2>/dev/null || echo unknown` + +/bin/arch = `(/bin/arch) 2>/dev/null || echo unknown` +/usr/bin/arch -k = `(/usr/bin/arch -k) 2>/dev/null || echo unknown` +/usr/convex/getsysinfo = `(/usr/convex/getsysinfo) 2>/dev/null || echo unknown` +/usr/bin/hostinfo = `(/usr/bin/hostinfo) 2>/dev/null || echo unknown` +/bin/machine = `(/bin/machine) 2>/dev/null || echo unknown` +/usr/bin/oslevel = `(/usr/bin/oslevel) 2>/dev/null || echo unknown` +/bin/universe = `(/bin/universe) 2>/dev/null || echo unknown` + +_ASUNAME + +as_save_IFS=$IFS; IFS=$PATH_SEPARATOR +for as_dir in $PATH +do + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. + $as_echo "PATH: $as_dir" + done +IFS=$as_save_IFS + +} >&5 + +cat >&5 <<_ACEOF + + +## ----------- ## +## Core tests. ## +## ----------- ## + +_ACEOF + + +# Keep a trace of the command line. +# Strip out --no-create and --no-recursion so they do not pile up. +# Strip out --silent because we don't want to record it for future runs. +# Also quote any args containing shell meta-characters. +# Make two passes to allow for proper duplicate-argument suppression. +ac_configure_args= +ac_configure_args0= +ac_configure_args1= +ac_must_keep_next=false +for ac_pass in 1 2 +do + for ac_arg + do + case $ac_arg in + -no-create | --no-c* | -n | -no-recursion | --no-r*) continue ;; + -q | -quiet | --quiet | --quie | --qui | --qu | --q \ + | -silent | --silent | --silen | --sile | --sil) + continue ;; + *\'*) + ac_arg=`$as_echo "$ac_arg" | sed "s/'/'\\\\\\\\''/g"` ;; + esac + case $ac_pass in + 1) as_fn_append ac_configure_args0 " '$ac_arg'" ;; + 2) + as_fn_append ac_configure_args1 " '$ac_arg'" + if test $ac_must_keep_next = true; then + ac_must_keep_next=false # Got value, back to normal. + else + case $ac_arg in + *=* | --config-cache | -C | -disable-* | --disable-* \ + | -enable-* | --enable-* | -gas | --g* | -nfp | --nf* \ + | -q | -quiet | --q* | -silent | --sil* | -v | -verb* \ + | -with-* | --with-* | -without-* | --without-* | --x) + case "$ac_configure_args0 " in + "$ac_configure_args1"*" '$ac_arg' "* ) continue ;; + esac + ;; + -* ) ac_must_keep_next=true ;; + esac + fi + as_fn_append ac_configure_args " '$ac_arg'" + ;; + esac + done +done +{ ac_configure_args0=; unset ac_configure_args0;} +{ ac_configure_args1=; unset ac_configure_args1;} + +# When interrupted or exit'd, cleanup temporary files, and complete +# config.log. We remove comments because anyway the quotes in there +# would cause problems or look ugly. +# WARNING: Use '\'' to represent an apostrophe within the trap. +# WARNING: Do not start the trap code with a newline, due to a FreeBSD 4.0 bug. +trap 'exit_status=$? + # Save into config.log some information that might help in debugging. + { + echo + + $as_echo "## ---------------- ## +## Cache variables. ## +## ---------------- ##" + echo + # The following way of writing the cache mishandles newlines in values, +( + for ac_var in `(set) 2>&1 | sed -n '\''s/^\([a-zA-Z_][a-zA-Z0-9_]*\)=.*/\1/p'\''`; do + eval ac_val=\$$ac_var + case $ac_val in #( + *${as_nl}*) + case $ac_var in #( + *_cv_*) { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: cache variable $ac_var contains a newline" >&5 +$as_echo "$as_me: WARNING: cache variable $ac_var contains a newline" >&2;} ;; + esac + case $ac_var in #( + _ | IFS | as_nl) ;; #( + BASH_ARGV | BASH_SOURCE) eval $ac_var= ;; #( + *) { eval $ac_var=; unset $ac_var;} ;; + esac ;; + esac + done + (set) 2>&1 | + case $as_nl`(ac_space='\'' '\''; set) 2>&1` in #( + *${as_nl}ac_space=\ *) + sed -n \ + "s/'\''/'\''\\\\'\'''\''/g; + s/^\\([_$as_cr_alnum]*_cv_[_$as_cr_alnum]*\\)=\\(.*\\)/\\1='\''\\2'\''/p" + ;; #( + *) + sed -n "/^[_$as_cr_alnum]*_cv_[_$as_cr_alnum]*=/p" + ;; + esac | + sort +) + echo + + $as_echo "## ----------------- ## +## Output variables. ## +## ----------------- ##" + echo + for ac_var in $ac_subst_vars + do + eval ac_val=\$$ac_var + case $ac_val in + *\'\''*) ac_val=`$as_echo "$ac_val" | sed "s/'\''/'\''\\\\\\\\'\'''\''/g"`;; + esac + $as_echo "$ac_var='\''$ac_val'\''" + done | sort + echo + + if test -n "$ac_subst_files"; then + $as_echo "## ------------------- ## +## File substitutions. ## +## ------------------- ##" + echo + for ac_var in $ac_subst_files + do + eval ac_val=\$$ac_var + case $ac_val in + *\'\''*) ac_val=`$as_echo "$ac_val" | sed "s/'\''/'\''\\\\\\\\'\'''\''/g"`;; + esac + $as_echo "$ac_var='\''$ac_val'\''" + done | sort + echo + fi + + if test -s confdefs.h; then + $as_echo "## ----------- ## +## confdefs.h. ## +## ----------- ##" + echo + cat confdefs.h + echo + fi + test "$ac_signal" != 0 && + $as_echo "$as_me: caught signal $ac_signal" + $as_echo "$as_me: exit $exit_status" + } >&5 + rm -f core *.core core.conftest.* && + rm -f -r conftest* confdefs* conf$$* $ac_clean_files && + exit $exit_status +' 0 +for ac_signal in 1 2 13 15; do + trap 'ac_signal='$ac_signal'; as_fn_exit 1' $ac_signal +done +ac_signal=0 + +# confdefs.h avoids OS command line length limits that DEFS can exceed. +rm -f -r conftest* confdefs.h + +$as_echo "/* confdefs.h */" > confdefs.h + +# Predefined preprocessor variables. + +cat >>confdefs.h <<_ACEOF +@%:@define PACKAGE_NAME "$PACKAGE_NAME" +_ACEOF + +cat >>confdefs.h <<_ACEOF +@%:@define PACKAGE_TARNAME "$PACKAGE_TARNAME" +_ACEOF + +cat >>confdefs.h <<_ACEOF +@%:@define PACKAGE_VERSION "$PACKAGE_VERSION" +_ACEOF + +cat >>confdefs.h <<_ACEOF +@%:@define PACKAGE_STRING "$PACKAGE_STRING" +_ACEOF + +cat >>confdefs.h <<_ACEOF +@%:@define PACKAGE_BUGREPORT "$PACKAGE_BUGREPORT" +_ACEOF + +cat >>confdefs.h <<_ACEOF +@%:@define PACKAGE_URL "$PACKAGE_URL" +_ACEOF + + +# Let the site file select an alternate cache file if it wants to. +# Prefer an explicitly selected file to automatically selected ones. +ac_site_file1=NONE +ac_site_file2=NONE +if test -n "$CONFIG_SITE"; then + # We do not want a PATH search for config.site. + case $CONFIG_SITE in @%:@(( + -*) ac_site_file1=./$CONFIG_SITE;; + */*) ac_site_file1=$CONFIG_SITE;; + *) ac_site_file1=./$CONFIG_SITE;; + esac +elif test "x$prefix" != xNONE; then + ac_site_file1=$prefix/share/config.site + ac_site_file2=$prefix/etc/config.site +else + ac_site_file1=$ac_default_prefix/share/config.site + ac_site_file2=$ac_default_prefix/etc/config.site +fi +for ac_site_file in "$ac_site_file1" "$ac_site_file2" +do + test "x$ac_site_file" = xNONE && continue + if test /dev/null != "$ac_site_file" && test -r "$ac_site_file"; then + { $as_echo "$as_me:${as_lineno-$LINENO}: loading site script $ac_site_file" >&5 +$as_echo "$as_me: loading site script $ac_site_file" >&6;} + sed 's/^/| /' "$ac_site_file" >&5 + . "$ac_site_file" \ + || { { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5 +$as_echo "$as_me: error: in \`$ac_pwd':" >&2;} +as_fn_error $? "failed to load site script $ac_site_file +See \`config.log' for more details" "$LINENO" 5; } + fi +done + +if test -r "$cache_file"; then + # Some versions of bash will fail to source /dev/null (special files + # actually), so we avoid doing that. DJGPP emulates it as a regular file. + if test /dev/null != "$cache_file" && test -f "$cache_file"; then + { $as_echo "$as_me:${as_lineno-$LINENO}: loading cache $cache_file" >&5 +$as_echo "$as_me: loading cache $cache_file" >&6;} + case $cache_file in + [\\/]* | ?:[\\/]* ) . "$cache_file";; + *) . "./$cache_file";; + esac + fi +else + { $as_echo "$as_me:${as_lineno-$LINENO}: creating cache $cache_file" >&5 +$as_echo "$as_me: creating cache $cache_file" >&6;} + >$cache_file +fi + +# Check that the precious variables saved in the cache have kept the same +# value. +ac_cache_corrupted=false +for ac_var in $ac_precious_vars; do + eval ac_old_set=\$ac_cv_env_${ac_var}_set + eval ac_new_set=\$ac_env_${ac_var}_set + eval ac_old_val=\$ac_cv_env_${ac_var}_value + eval ac_new_val=\$ac_env_${ac_var}_value + case $ac_old_set,$ac_new_set in + set,) + { $as_echo "$as_me:${as_lineno-$LINENO}: error: \`$ac_var' was set to \`$ac_old_val' in the previous run" >&5 +$as_echo "$as_me: error: \`$ac_var' was set to \`$ac_old_val' in the previous run" >&2;} + ac_cache_corrupted=: ;; + ,set) + { $as_echo "$as_me:${as_lineno-$LINENO}: error: \`$ac_var' was not set in the previous run" >&5 +$as_echo "$as_me: error: \`$ac_var' was not set in the previous run" >&2;} + ac_cache_corrupted=: ;; + ,);; + *) + if test "x$ac_old_val" != "x$ac_new_val"; then + # differences in whitespace do not lead to failure. + ac_old_val_w=`echo x $ac_old_val` + ac_new_val_w=`echo x $ac_new_val` + if test "$ac_old_val_w" != "$ac_new_val_w"; then + { $as_echo "$as_me:${as_lineno-$LINENO}: error: \`$ac_var' has changed since the previous run:" >&5 +$as_echo "$as_me: error: \`$ac_var' has changed since the previous run:" >&2;} + ac_cache_corrupted=: + else + { $as_echo "$as_me:${as_lineno-$LINENO}: warning: ignoring whitespace changes in \`$ac_var' since the previous run:" >&5 +$as_echo "$as_me: warning: ignoring whitespace changes in \`$ac_var' since the previous run:" >&2;} + eval $ac_var=\$ac_old_val + fi + { $as_echo "$as_me:${as_lineno-$LINENO}: former value: \`$ac_old_val'" >&5 +$as_echo "$as_me: former value: \`$ac_old_val'" >&2;} + { $as_echo "$as_me:${as_lineno-$LINENO}: current value: \`$ac_new_val'" >&5 +$as_echo "$as_me: current value: \`$ac_new_val'" >&2;} + fi;; + esac + # Pass precious variables to config.status. + if test "$ac_new_set" = set; then + case $ac_new_val in + *\'*) ac_arg=$ac_var=`$as_echo "$ac_new_val" | sed "s/'/'\\\\\\\\''/g"` ;; + *) ac_arg=$ac_var=$ac_new_val ;; + esac + case " $ac_configure_args " in + *" '$ac_arg' "*) ;; # Avoid dups. Use of quotes ensures accuracy. + *) as_fn_append ac_configure_args " '$ac_arg'" ;; + esac + fi +done +if $ac_cache_corrupted; then + { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5 +$as_echo "$as_me: error: in \`$ac_pwd':" >&2;} + { $as_echo "$as_me:${as_lineno-$LINENO}: error: changes in the environment can compromise the build" >&5 +$as_echo "$as_me: error: changes in the environment can compromise the build" >&2;} + as_fn_error $? "run \`make distclean' and/or \`rm $cache_file' and start over" "$LINENO" 5 +fi +## -------------------- ## +## Main body of script. ## +## -------------------- ## + +ac_ext=c +ac_cpp='$CPP $CPPFLAGS' +ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5' +ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5' +ac_compiler_gnu=$ac_cv_c_compiler_gnu + + +am__api_version='1.14' + +ac_aux_dir= +for ac_dir in "$srcdir" "$srcdir/.." "$srcdir/../.."; do + if test -f "$ac_dir/install-sh"; then + ac_aux_dir=$ac_dir + ac_install_sh="$ac_aux_dir/install-sh -c" + break + elif test -f "$ac_dir/install.sh"; then + ac_aux_dir=$ac_dir + ac_install_sh="$ac_aux_dir/install.sh -c" + break + elif test -f "$ac_dir/shtool"; then + ac_aux_dir=$ac_dir + ac_install_sh="$ac_aux_dir/shtool install -c" + break + fi +done +if test -z "$ac_aux_dir"; then + as_fn_error $? "cannot find install-sh, install.sh, or shtool in \"$srcdir\" \"$srcdir/..\" \"$srcdir/../..\"" "$LINENO" 5 +fi + +# These three variables are undocumented and unsupported, +# and are intended to be withdrawn in a future Autoconf release. +# They can cause serious problems if a builder's source tree is in a directory +# whose full name contains unusual characters. +ac_config_guess="$SHELL $ac_aux_dir/config.guess" # Please don't use this var. +ac_config_sub="$SHELL $ac_aux_dir/config.sub" # Please don't use this var. +ac_configure="$SHELL $ac_aux_dir/configure" # Please don't use this var. + + +# Find a good install program. We prefer a C program (faster), +# so one script is as good as another. But avoid the broken or +# incompatible versions: +# SysV /etc/install, /usr/sbin/install +# SunOS /usr/etc/install +# IRIX /sbin/install +# AIX /bin/install +# AmigaOS /C/install, which installs bootblocks on floppy discs +# AIX 4 /usr/bin/installbsd, which doesn't work without a -g flag +# AFS /usr/afsws/bin/install, which mishandles nonexistent args +# SVR4 /usr/ucb/install, which tries to use the nonexistent group "staff" +# OS/2's system install, which has a completely different semantic +# ./install, which can be erroneously created by make from ./install.sh. +# Reject install programs that cannot install multiple files. +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for a BSD-compatible install" >&5 +$as_echo_n "checking for a BSD-compatible install... " >&6; } +if test -z "$INSTALL"; then +if ${ac_cv_path_install+:} false; then : + $as_echo_n "(cached) " >&6 +else + as_save_IFS=$IFS; IFS=$PATH_SEPARATOR +for as_dir in $PATH +do + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. + # Account for people who put trailing slashes in PATH elements. +case $as_dir/ in @%:@(( + ./ | .// | /[cC]/* | \ + /etc/* | /usr/sbin/* | /usr/etc/* | /sbin/* | /usr/afsws/bin/* | \ + ?:[\\/]os2[\\/]install[\\/]* | ?:[\\/]OS2[\\/]INSTALL[\\/]* | \ + /usr/ucb/* ) ;; + *) + # OSF1 and SCO ODT 3.0 have their own names for install. + # Don't use installbsd from OSF since it installs stuff as root + # by default. + for ac_prog in ginstall scoinst install; do + for ac_exec_ext in '' $ac_executable_extensions; do + if as_fn_executable_p "$as_dir/$ac_prog$ac_exec_ext"; then + if test $ac_prog = install && + grep dspmsg "$as_dir/$ac_prog$ac_exec_ext" >/dev/null 2>&1; then + # AIX install. It has an incompatible calling convention. + : + elif test $ac_prog = install && + grep pwplus "$as_dir/$ac_prog$ac_exec_ext" >/dev/null 2>&1; then + # program-specific install script used by HP pwplus--don't use. + : + else + rm -rf conftest.one conftest.two conftest.dir + echo one > conftest.one + echo two > conftest.two + mkdir conftest.dir + if "$as_dir/$ac_prog$ac_exec_ext" -c conftest.one conftest.two "`pwd`/conftest.dir" && + test -s conftest.one && test -s conftest.two && + test -s conftest.dir/conftest.one && + test -s conftest.dir/conftest.two + then + ac_cv_path_install="$as_dir/$ac_prog$ac_exec_ext -c" + break 3 + fi + fi + fi + done + done + ;; +esac + + done +IFS=$as_save_IFS + +rm -rf conftest.one conftest.two conftest.dir + +fi + if test "${ac_cv_path_install+set}" = set; then + INSTALL=$ac_cv_path_install + else + # As a last resort, use the slow shell script. Don't cache a + # value for INSTALL within a source directory, because that will + # break other packages using the cache if that directory is + # removed, or if the value is a relative name. + INSTALL=$ac_install_sh + fi +fi +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $INSTALL" >&5 +$as_echo "$INSTALL" >&6; } + +# Use test -z because SunOS4 sh mishandles braces in ${var-val}. +# It thinks the first close brace ends the variable substitution. +test -z "$INSTALL_PROGRAM" && INSTALL_PROGRAM='${INSTALL}' + +test -z "$INSTALL_SCRIPT" && INSTALL_SCRIPT='${INSTALL}' + +test -z "$INSTALL_DATA" && INSTALL_DATA='${INSTALL} -m 644' + +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether build environment is sane" >&5 +$as_echo_n "checking whether build environment is sane... " >&6; } +# Reject unsafe characters in $srcdir or the absolute working directory +# name. Accept space and tab only in the latter. +am_lf=' +' +case `pwd` in + *[\\\"\#\$\&\'\`$am_lf]*) + as_fn_error $? "unsafe absolute working directory name" "$LINENO" 5;; +esac +case $srcdir in + *[\\\"\#\$\&\'\`$am_lf\ \ ]*) + as_fn_error $? "unsafe srcdir value: '$srcdir'" "$LINENO" 5;; +esac + +# Do 'set' in a subshell so we don't clobber the current shell's +# arguments. Must try -L first in case configure is actually a +# symlink; some systems play weird games with the mod time of symlinks +# (eg FreeBSD returns the mod time of the symlink's containing +# directory). +if ( + am_has_slept=no + for am_try in 1 2; do + echo "timestamp, slept: $am_has_slept" > conftest.file + set X `ls -Lt "$srcdir/configure" conftest.file 2> /dev/null` + if test "$*" = "X"; then + # -L didn't work. + set X `ls -t "$srcdir/configure" conftest.file` + fi + if test "$*" != "X $srcdir/configure conftest.file" \ + && test "$*" != "X conftest.file $srcdir/configure"; then + + # If neither matched, then we have a broken ls. This can happen + # if, for instance, CONFIG_SHELL is bash and it inherits a + # broken ls alias from the environment. This has actually + # happened. Such a system could not be considered "sane". + as_fn_error $? "ls -t appears to fail. Make sure there is not a broken + alias in your environment" "$LINENO" 5 + fi + if test "$2" = conftest.file || test $am_try -eq 2; then + break + fi + # Just in case. + sleep 1 + am_has_slept=yes + done + test "$2" = conftest.file + ) +then + # Ok. + : +else + as_fn_error $? "newly created file is older than distributed files! +Check your system clock" "$LINENO" 5 +fi +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: yes" >&5 +$as_echo "yes" >&6; } +# If we didn't sleep, we still need to ensure time stamps of config.status and +# generated files are strictly newer. +am_sleep_pid= +if grep 'slept: no' conftest.file >/dev/null 2>&1; then + ( sleep 1 ) & + am_sleep_pid=$! +fi + +rm -f conftest.file + +test "$program_prefix" != NONE && + program_transform_name="s&^&$program_prefix&;$program_transform_name" +# Use a double $ so make ignores it. +test "$program_suffix" != NONE && + program_transform_name="s&\$&$program_suffix&;$program_transform_name" +# Double any \ or $. +# By default was `s,x,x', remove it if useless. +ac_script='s/[\\$]/&&/g;s/;s,x,x,$//' +program_transform_name=`$as_echo "$program_transform_name" | sed "$ac_script"` + +# expand $ac_aux_dir to an absolute path +am_aux_dir=`cd $ac_aux_dir && pwd` + +if test x"${MISSING+set}" != xset; then + case $am_aux_dir in + *\ * | *\ *) + MISSING="\${SHELL} \"$am_aux_dir/missing\"" ;; + *) + MISSING="\${SHELL} $am_aux_dir/missing" ;; + esac +fi +# Use eval to expand $SHELL +if eval "$MISSING --is-lightweight"; then + am_missing_run="$MISSING " +else + am_missing_run= + { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: 'missing' script is too old or missing" >&5 +$as_echo "$as_me: WARNING: 'missing' script is too old or missing" >&2;} +fi + +if test x"${install_sh}" != xset; then + case $am_aux_dir in + *\ * | *\ *) + install_sh="\${SHELL} '$am_aux_dir/install-sh'" ;; + *) + install_sh="\${SHELL} $am_aux_dir/install-sh" + esac +fi + +# Installed binaries are usually stripped using 'strip' when the user +# run "make install-strip". However 'strip' might not be the right +# tool to use in cross-compilation environments, therefore Automake +# will honor the 'STRIP' environment variable to overrule this program. +if test "$cross_compiling" != no; then + if test -n "$ac_tool_prefix"; then + # Extract the first word of "${ac_tool_prefix}strip", so it can be a program name with args. +set dummy ${ac_tool_prefix}strip; ac_word=$2 +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 +$as_echo_n "checking for $ac_word... " >&6; } +if ${ac_cv_prog_STRIP+:} false; then : + $as_echo_n "(cached) " >&6 +else + if test -n "$STRIP"; then + ac_cv_prog_STRIP="$STRIP" # Let the user override the test. +else +as_save_IFS=$IFS; IFS=$PATH_SEPARATOR +for as_dir in $PATH +do + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. + for ac_exec_ext in '' $ac_executable_extensions; do + if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then + ac_cv_prog_STRIP="${ac_tool_prefix}strip" + $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 + break 2 + fi +done + done +IFS=$as_save_IFS + +fi +fi +STRIP=$ac_cv_prog_STRIP +if test -n "$STRIP"; then + { $as_echo "$as_me:${as_lineno-$LINENO}: result: $STRIP" >&5 +$as_echo "$STRIP" >&6; } +else + { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 +$as_echo "no" >&6; } +fi + + +fi +if test -z "$ac_cv_prog_STRIP"; then + ac_ct_STRIP=$STRIP + # Extract the first word of "strip", so it can be a program name with args. +set dummy strip; ac_word=$2 +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 +$as_echo_n "checking for $ac_word... " >&6; } +if ${ac_cv_prog_ac_ct_STRIP+:} false; then : + $as_echo_n "(cached) " >&6 +else + if test -n "$ac_ct_STRIP"; then + ac_cv_prog_ac_ct_STRIP="$ac_ct_STRIP" # Let the user override the test. +else +as_save_IFS=$IFS; IFS=$PATH_SEPARATOR +for as_dir in $PATH +do + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. + for ac_exec_ext in '' $ac_executable_extensions; do + if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then + ac_cv_prog_ac_ct_STRIP="strip" + $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 + break 2 + fi +done + done +IFS=$as_save_IFS + +fi +fi +ac_ct_STRIP=$ac_cv_prog_ac_ct_STRIP +if test -n "$ac_ct_STRIP"; then + { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_ct_STRIP" >&5 +$as_echo "$ac_ct_STRIP" >&6; } +else + { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 +$as_echo "no" >&6; } +fi + + if test "x$ac_ct_STRIP" = x; then + STRIP=":" + else + case $cross_compiling:$ac_tool_warned in +yes:) +{ $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5 +$as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;} +ac_tool_warned=yes ;; +esac + STRIP=$ac_ct_STRIP + fi +else + STRIP="$ac_cv_prog_STRIP" +fi + +fi +INSTALL_STRIP_PROGRAM="\$(install_sh) -c -s" + +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for a thread-safe mkdir -p" >&5 +$as_echo_n "checking for a thread-safe mkdir -p... " >&6; } +if test -z "$MKDIR_P"; then + if ${ac_cv_path_mkdir+:} false; then : + $as_echo_n "(cached) " >&6 +else + as_save_IFS=$IFS; IFS=$PATH_SEPARATOR +for as_dir in $PATH$PATH_SEPARATOR/opt/sfw/bin +do + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. + for ac_prog in mkdir gmkdir; do + for ac_exec_ext in '' $ac_executable_extensions; do + as_fn_executable_p "$as_dir/$ac_prog$ac_exec_ext" || continue + case `"$as_dir/$ac_prog$ac_exec_ext" --version 2>&1` in #( + 'mkdir (GNU coreutils) '* | \ + 'mkdir (coreutils) '* | \ + 'mkdir (fileutils) '4.1*) + ac_cv_path_mkdir=$as_dir/$ac_prog$ac_exec_ext + break 3;; + esac + done + done + done +IFS=$as_save_IFS + +fi + + test -d ./--version && rmdir ./--version + if test "${ac_cv_path_mkdir+set}" = set; then + MKDIR_P="$ac_cv_path_mkdir -p" + else + # As a last resort, use the slow shell script. Don't cache a + # value for MKDIR_P within a source directory, because that will + # break other packages using the cache if that directory is + # removed, or if the value is a relative name. + MKDIR_P="$ac_install_sh -d" + fi +fi +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $MKDIR_P" >&5 +$as_echo "$MKDIR_P" >&6; } + +for ac_prog in gawk mawk nawk awk +do + # Extract the first word of "$ac_prog", so it can be a program name with args. +set dummy $ac_prog; ac_word=$2 +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 +$as_echo_n "checking for $ac_word... " >&6; } +if ${ac_cv_prog_AWK+:} false; then : + $as_echo_n "(cached) " >&6 +else + if test -n "$AWK"; then + ac_cv_prog_AWK="$AWK" # Let the user override the test. +else +as_save_IFS=$IFS; IFS=$PATH_SEPARATOR +for as_dir in $PATH +do + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. + for ac_exec_ext in '' $ac_executable_extensions; do + if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then + ac_cv_prog_AWK="$ac_prog" + $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 + break 2 + fi +done + done +IFS=$as_save_IFS + +fi +fi +AWK=$ac_cv_prog_AWK +if test -n "$AWK"; then + { $as_echo "$as_me:${as_lineno-$LINENO}: result: $AWK" >&5 +$as_echo "$AWK" >&6; } +else + { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 +$as_echo "no" >&6; } +fi + + + test -n "$AWK" && break +done + +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether ${MAKE-make} sets \$(MAKE)" >&5 +$as_echo_n "checking whether ${MAKE-make} sets \$(MAKE)... " >&6; } +set x ${MAKE-make} +ac_make=`$as_echo "$2" | sed 's/+/p/g; s/[^a-zA-Z0-9_]/_/g'` +if eval \${ac_cv_prog_make_${ac_make}_set+:} false; then : + $as_echo_n "(cached) " >&6 +else + cat >conftest.make <<\_ACEOF +SHELL = /bin/sh +all: + @echo '@@@%%%=$(MAKE)=@@@%%%' +_ACEOF +# GNU make sometimes prints "make[1]: Entering ...", which would confuse us. +case `${MAKE-make} -f conftest.make 2>/dev/null` in + *@@@%%%=?*=@@@%%%*) + eval ac_cv_prog_make_${ac_make}_set=yes;; + *) + eval ac_cv_prog_make_${ac_make}_set=no;; +esac +rm -f conftest.make +fi +if eval test \$ac_cv_prog_make_${ac_make}_set = yes; then + { $as_echo "$as_me:${as_lineno-$LINENO}: result: yes" >&5 +$as_echo "yes" >&6; } + SET_MAKE= +else + { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 +$as_echo "no" >&6; } + SET_MAKE="MAKE=${MAKE-make}" +fi + +rm -rf .tst 2>/dev/null +mkdir .tst 2>/dev/null +if test -d .tst; then + am__leading_dot=. +else + am__leading_dot=_ +fi +rmdir .tst 2>/dev/null + +@%:@ Check whether --enable-silent-rules was given. +if test "${enable_silent_rules+set}" = set; then : + enableval=$enable_silent_rules; +fi + +case $enable_silent_rules in @%:@ ((( + yes) AM_DEFAULT_VERBOSITY=0;; + no) AM_DEFAULT_VERBOSITY=1;; + *) AM_DEFAULT_VERBOSITY=1;; +esac +am_make=${MAKE-make} +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether $am_make supports nested variables" >&5 +$as_echo_n "checking whether $am_make supports nested variables... " >&6; } +if ${am_cv_make_support_nested_variables+:} false; then : + $as_echo_n "(cached) " >&6 +else + if $as_echo 'TRUE=$(BAR$(V)) +BAR0=false +BAR1=true +V=1 +am__doit: + @$(TRUE) +.PHONY: am__doit' | $am_make -f - >/dev/null 2>&1; then + am_cv_make_support_nested_variables=yes +else + am_cv_make_support_nested_variables=no +fi +fi +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $am_cv_make_support_nested_variables" >&5 +$as_echo "$am_cv_make_support_nested_variables" >&6; } +if test $am_cv_make_support_nested_variables = yes; then + AM_V='$(V)' + AM_DEFAULT_V='$(AM_DEFAULT_VERBOSITY)' +else + AM_V=$AM_DEFAULT_VERBOSITY + AM_DEFAULT_V=$AM_DEFAULT_VERBOSITY +fi +AM_BACKSLASH='\' + +if test "`cd $srcdir && pwd`" != "`pwd`"; then + # Use -I$(srcdir) only when $(srcdir) != ., so that make's output + # is not polluted with repeated "-I." + am__isrc=' -I$(srcdir)' + # test to see if srcdir already configured + if test -f $srcdir/config.status; then + as_fn_error $? "source directory already configured; run \"make distclean\" there first" "$LINENO" 5 + fi +fi + +# test whether we have cygpath +if test -z "$CYGPATH_W"; then + if (cygpath --version) >/dev/null 2>/dev/null; then + CYGPATH_W='cygpath -w' + else + CYGPATH_W=echo + fi +fi + + +# Define the identity of the package. + PACKAGE='autohello' + VERSION='1.1' + + +cat >>confdefs.h <<_ACEOF +@%:@define PACKAGE "$PACKAGE" +_ACEOF + + +cat >>confdefs.h <<_ACEOF +@%:@define VERSION "$VERSION" +_ACEOF + +# Some tools Automake needs. + +ACLOCAL=${ACLOCAL-"${am_missing_run}aclocal-${am__api_version}"} + + +AUTOCONF=${AUTOCONF-"${am_missing_run}autoconf"} + + +AUTOMAKE=${AUTOMAKE-"${am_missing_run}automake-${am__api_version}"} + + +AUTOHEADER=${AUTOHEADER-"${am_missing_run}autoheader"} + + +MAKEINFO=${MAKEINFO-"${am_missing_run}makeinfo"} + +# For better backward compatibility. To be removed once Automake 1.9.x +# dies out for good. For more background, see: +# +# +mkdir_p='$(MKDIR_P)' + +# We need awk for the "check" target. The system "awk" is bad on +# some platforms. +# Always define AMTAR for backward compatibility. Yes, it's still used +# in the wild :-( We should find a proper way to deprecate it ... +AMTAR='$${TAR-tar}' + + +# We'll loop over all known methods to create a tar archive until one works. +_am_tools='gnutar pax cpio none' + +am__tar='$${TAR-tar} chof - "$$tardir"' am__untar='$${TAR-tar} xf -' + + + + + + +# POSIX will say in a future version that running "rm -f" with no argument +# is OK; and we want to be able to make that assumption in our Makefile +# recipes. So use an aggressive probe to check that the usage we want is +# actually supported "in the wild" to an acceptable degree. +# See automake bug#10828. +# To make any issue more visible, cause the running configure to be aborted +# by default if the 'rm' program in use doesn't match our expectations; the +# user can still override this though. +if rm -f && rm -fr && rm -rf; then : OK; else + cat >&2 <<'END' +Oops! + +Your 'rm' program seems unable to run without file operands specified +on the command line, even when the '-f' option is present. This is contrary +to the behaviour of most rm programs out there, and not conforming with +the upcoming POSIX standard: + +Please tell bug-automake@gnu.org about your system, including the value +of your $PATH and any error possibly output before this message. This +can help us improve future automake versions. + +END + if test x"$ACCEPT_INFERIOR_RM_PROGRAM" = x"yes"; then + echo 'Configuration will proceed anyway, since you have set the' >&2 + echo 'ACCEPT_INFERIOR_RM_PROGRAM variable to "yes"' >&2 + echo >&2 + else + cat >&2 <<'END' +Aborting the configuration process, to ensure you take notice of the issue. + +You can download and install GNU coreutils to get an 'rm' implementation +that behaves properly: . + +If you want to complete the configuration process using your problematic +'rm' anyway, export the environment variable ACCEPT_INFERIOR_RM_PROGRAM +to "yes", and re-run configure. + +END + as_fn_error $? "Your 'rm' program is bad, sorry." "$LINENO" 5 + fi +fi + + +ac_config_headers="$ac_config_headers config.h" + + +# Checks for programs. +ac_ext=c +ac_cpp='$CPP $CPPFLAGS' +ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5' +ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5' +ac_compiler_gnu=$ac_cv_c_compiler_gnu +if test -n "$ac_tool_prefix"; then + # Extract the first word of "${ac_tool_prefix}gcc", so it can be a program name with args. +set dummy ${ac_tool_prefix}gcc; ac_word=$2 +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 +$as_echo_n "checking for $ac_word... " >&6; } +if ${ac_cv_prog_CC+:} false; then : + $as_echo_n "(cached) " >&6 +else + if test -n "$CC"; then + ac_cv_prog_CC="$CC" # Let the user override the test. +else +as_save_IFS=$IFS; IFS=$PATH_SEPARATOR +for as_dir in $PATH +do + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. + for ac_exec_ext in '' $ac_executable_extensions; do + if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then + ac_cv_prog_CC="${ac_tool_prefix}gcc" + $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 + break 2 + fi +done + done +IFS=$as_save_IFS + +fi +fi +CC=$ac_cv_prog_CC +if test -n "$CC"; then + { $as_echo "$as_me:${as_lineno-$LINENO}: result: $CC" >&5 +$as_echo "$CC" >&6; } +else + { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 +$as_echo "no" >&6; } +fi + + +fi +if test -z "$ac_cv_prog_CC"; then + ac_ct_CC=$CC + # Extract the first word of "gcc", so it can be a program name with args. +set dummy gcc; ac_word=$2 +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 +$as_echo_n "checking for $ac_word... " >&6; } +if ${ac_cv_prog_ac_ct_CC+:} false; then : + $as_echo_n "(cached) " >&6 +else + if test -n "$ac_ct_CC"; then + ac_cv_prog_ac_ct_CC="$ac_ct_CC" # Let the user override the test. +else +as_save_IFS=$IFS; IFS=$PATH_SEPARATOR +for as_dir in $PATH +do + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. + for ac_exec_ext in '' $ac_executable_extensions; do + if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then + ac_cv_prog_ac_ct_CC="gcc" + $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 + break 2 + fi +done + done +IFS=$as_save_IFS + +fi +fi +ac_ct_CC=$ac_cv_prog_ac_ct_CC +if test -n "$ac_ct_CC"; then + { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_ct_CC" >&5 +$as_echo "$ac_ct_CC" >&6; } +else + { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 +$as_echo "no" >&6; } +fi + + if test "x$ac_ct_CC" = x; then + CC="" + else + case $cross_compiling:$ac_tool_warned in +yes:) +{ $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5 +$as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;} +ac_tool_warned=yes ;; +esac + CC=$ac_ct_CC + fi +else + CC="$ac_cv_prog_CC" +fi + +if test -z "$CC"; then + if test -n "$ac_tool_prefix"; then + # Extract the first word of "${ac_tool_prefix}cc", so it can be a program name with args. +set dummy ${ac_tool_prefix}cc; ac_word=$2 +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 +$as_echo_n "checking for $ac_word... " >&6; } +if ${ac_cv_prog_CC+:} false; then : + $as_echo_n "(cached) " >&6 +else + if test -n "$CC"; then + ac_cv_prog_CC="$CC" # Let the user override the test. +else +as_save_IFS=$IFS; IFS=$PATH_SEPARATOR +for as_dir in $PATH +do + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. + for ac_exec_ext in '' $ac_executable_extensions; do + if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then + ac_cv_prog_CC="${ac_tool_prefix}cc" + $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 + break 2 + fi +done + done +IFS=$as_save_IFS + +fi +fi +CC=$ac_cv_prog_CC +if test -n "$CC"; then + { $as_echo "$as_me:${as_lineno-$LINENO}: result: $CC" >&5 +$as_echo "$CC" >&6; } +else + { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 +$as_echo "no" >&6; } +fi + + + fi +fi +if test -z "$CC"; then + # Extract the first word of "cc", so it can be a program name with args. +set dummy cc; ac_word=$2 +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 +$as_echo_n "checking for $ac_word... " >&6; } +if ${ac_cv_prog_CC+:} false; then : + $as_echo_n "(cached) " >&6 +else + if test -n "$CC"; then + ac_cv_prog_CC="$CC" # Let the user override the test. +else + ac_prog_rejected=no +as_save_IFS=$IFS; IFS=$PATH_SEPARATOR +for as_dir in $PATH +do + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. + for ac_exec_ext in '' $ac_executable_extensions; do + if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then + if test "$as_dir/$ac_word$ac_exec_ext" = "/usr/ucb/cc"; then + ac_prog_rejected=yes + continue + fi + ac_cv_prog_CC="cc" + $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 + break 2 + fi +done + done +IFS=$as_save_IFS + +if test $ac_prog_rejected = yes; then + # We found a bogon in the path, so make sure we never use it. + set dummy $ac_cv_prog_CC + shift + if test $@%:@ != 0; then + # We chose a different compiler from the bogus one. + # However, it has the same basename, so the bogon will be chosen + # first if we set CC to just the basename; use the full file name. + shift + ac_cv_prog_CC="$as_dir/$ac_word${1+' '}$@" + fi +fi +fi +fi +CC=$ac_cv_prog_CC +if test -n "$CC"; then + { $as_echo "$as_me:${as_lineno-$LINENO}: result: $CC" >&5 +$as_echo "$CC" >&6; } +else + { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 +$as_echo "no" >&6; } +fi + + +fi +if test -z "$CC"; then + if test -n "$ac_tool_prefix"; then + for ac_prog in cl.exe + do + # Extract the first word of "$ac_tool_prefix$ac_prog", so it can be a program name with args. +set dummy $ac_tool_prefix$ac_prog; ac_word=$2 +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 +$as_echo_n "checking for $ac_word... " >&6; } +if ${ac_cv_prog_CC+:} false; then : + $as_echo_n "(cached) " >&6 +else + if test -n "$CC"; then + ac_cv_prog_CC="$CC" # Let the user override the test. +else +as_save_IFS=$IFS; IFS=$PATH_SEPARATOR +for as_dir in $PATH +do + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. + for ac_exec_ext in '' $ac_executable_extensions; do + if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then + ac_cv_prog_CC="$ac_tool_prefix$ac_prog" + $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 + break 2 + fi +done + done +IFS=$as_save_IFS + +fi +fi +CC=$ac_cv_prog_CC +if test -n "$CC"; then + { $as_echo "$as_me:${as_lineno-$LINENO}: result: $CC" >&5 +$as_echo "$CC" >&6; } +else + { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 +$as_echo "no" >&6; } +fi + + + test -n "$CC" && break + done +fi +if test -z "$CC"; then + ac_ct_CC=$CC + for ac_prog in cl.exe +do + # Extract the first word of "$ac_prog", so it can be a program name with args. +set dummy $ac_prog; ac_word=$2 +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 +$as_echo_n "checking for $ac_word... " >&6; } +if ${ac_cv_prog_ac_ct_CC+:} false; then : + $as_echo_n "(cached) " >&6 +else + if test -n "$ac_ct_CC"; then + ac_cv_prog_ac_ct_CC="$ac_ct_CC" # Let the user override the test. +else +as_save_IFS=$IFS; IFS=$PATH_SEPARATOR +for as_dir in $PATH +do + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. + for ac_exec_ext in '' $ac_executable_extensions; do + if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then + ac_cv_prog_ac_ct_CC="$ac_prog" + $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 + break 2 + fi +done + done +IFS=$as_save_IFS + +fi +fi +ac_ct_CC=$ac_cv_prog_ac_ct_CC +if test -n "$ac_ct_CC"; then + { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_ct_CC" >&5 +$as_echo "$ac_ct_CC" >&6; } +else + { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 +$as_echo "no" >&6; } +fi + + + test -n "$ac_ct_CC" && break +done + + if test "x$ac_ct_CC" = x; then + CC="" + else + case $cross_compiling:$ac_tool_warned in +yes:) +{ $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5 +$as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;} +ac_tool_warned=yes ;; +esac + CC=$ac_ct_CC + fi +fi + +fi + + +test -z "$CC" && { { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5 +$as_echo "$as_me: error: in \`$ac_pwd':" >&2;} +as_fn_error $? "no acceptable C compiler found in \$PATH +See \`config.log' for more details" "$LINENO" 5; } + +# Provide some information about the compiler. +$as_echo "$as_me:${as_lineno-$LINENO}: checking for C compiler version" >&5 +set X $ac_compile +ac_compiler=$2 +for ac_option in --version -v -V -qversion; do + { { ac_try="$ac_compiler $ac_option >&5" +case "(($ac_try" in + *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; + *) ac_try_echo=$ac_try;; +esac +eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\"" +$as_echo "$ac_try_echo"; } >&5 + (eval "$ac_compiler $ac_option >&5") 2>conftest.err + ac_status=$? + if test -s conftest.err; then + sed '10a\ +... rest of stderr output deleted ... + 10q' conftest.err >conftest.er1 + cat conftest.er1 >&5 + fi + rm -f conftest.er1 conftest.err + $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 + test $ac_status = 0; } +done + +cat confdefs.h - <<_ACEOF >conftest.$ac_ext +/* end confdefs.h. */ + +int +main () +{ + + ; + return 0; +} +_ACEOF +ac_clean_files_save=$ac_clean_files +ac_clean_files="$ac_clean_files a.out a.out.dSYM a.exe b.out" +# Try to create an executable without -o first, disregard a.out. +# It will help us diagnose broken compilers, and finding out an intuition +# of exeext. +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether the C compiler works" >&5 +$as_echo_n "checking whether the C compiler works... " >&6; } +ac_link_default=`$as_echo "$ac_link" | sed 's/ -o *conftest[^ ]*//'` + +# The possible output files: +ac_files="a.out conftest.exe conftest a.exe a_out.exe b.out conftest.*" + +ac_rmfiles= +for ac_file in $ac_files +do + case $ac_file in + *.$ac_ext | *.xcoff | *.tds | *.d | *.pdb | *.xSYM | *.bb | *.bbg | *.map | *.inf | *.dSYM | *.o | *.obj ) ;; + * ) ac_rmfiles="$ac_rmfiles $ac_file";; + esac +done +rm -f $ac_rmfiles + +if { { ac_try="$ac_link_default" +case "(($ac_try" in + *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; + *) ac_try_echo=$ac_try;; +esac +eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\"" +$as_echo "$ac_try_echo"; } >&5 + (eval "$ac_link_default") 2>&5 + ac_status=$? + $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 + test $ac_status = 0; }; then : + # Autoconf-2.13 could set the ac_cv_exeext variable to `no'. +# So ignore a value of `no', otherwise this would lead to `EXEEXT = no' +# in a Makefile. We should not override ac_cv_exeext if it was cached, +# so that the user can short-circuit this test for compilers unknown to +# Autoconf. +for ac_file in $ac_files '' +do + test -f "$ac_file" || continue + case $ac_file in + *.$ac_ext | *.xcoff | *.tds | *.d | *.pdb | *.xSYM | *.bb | *.bbg | *.map | *.inf | *.dSYM | *.o | *.obj ) + ;; + [ab].out ) + # We found the default executable, but exeext='' is most + # certainly right. + break;; + *.* ) + if test "${ac_cv_exeext+set}" = set && test "$ac_cv_exeext" != no; + then :; else + ac_cv_exeext=`expr "$ac_file" : '[^.]*\(\..*\)'` + fi + # We set ac_cv_exeext here because the later test for it is not + # safe: cross compilers may not add the suffix if given an `-o' + # argument, so we may need to know it at that point already. + # Even if this section looks crufty: it has the advantage of + # actually working. + break;; + * ) + break;; + esac +done +test "$ac_cv_exeext" = no && ac_cv_exeext= + +else + ac_file='' +fi +if test -z "$ac_file"; then : + { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 +$as_echo "no" >&6; } +$as_echo "$as_me: failed program was:" >&5 +sed 's/^/| /' conftest.$ac_ext >&5 + +{ { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5 +$as_echo "$as_me: error: in \`$ac_pwd':" >&2;} +as_fn_error 77 "C compiler cannot create executables +See \`config.log' for more details" "$LINENO" 5; } +else + { $as_echo "$as_me:${as_lineno-$LINENO}: result: yes" >&5 +$as_echo "yes" >&6; } +fi +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for C compiler default output file name" >&5 +$as_echo_n "checking for C compiler default output file name... " >&6; } +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_file" >&5 +$as_echo "$ac_file" >&6; } +ac_exeext=$ac_cv_exeext + +rm -f -r a.out a.out.dSYM a.exe conftest$ac_cv_exeext b.out +ac_clean_files=$ac_clean_files_save +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for suffix of executables" >&5 +$as_echo_n "checking for suffix of executables... " >&6; } +if { { ac_try="$ac_link" +case "(($ac_try" in + *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; + *) ac_try_echo=$ac_try;; +esac +eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\"" +$as_echo "$ac_try_echo"; } >&5 + (eval "$ac_link") 2>&5 + ac_status=$? + $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 + test $ac_status = 0; }; then : + # If both `conftest.exe' and `conftest' are `present' (well, observable) +# catch `conftest.exe'. For instance with Cygwin, `ls conftest' will +# work properly (i.e., refer to `conftest.exe'), while it won't with +# `rm'. +for ac_file in conftest.exe conftest conftest.*; do + test -f "$ac_file" || continue + case $ac_file in + *.$ac_ext | *.xcoff | *.tds | *.d | *.pdb | *.xSYM | *.bb | *.bbg | *.map | *.inf | *.dSYM | *.o | *.obj ) ;; + *.* ) ac_cv_exeext=`expr "$ac_file" : '[^.]*\(\..*\)'` + break;; + * ) break;; + esac +done +else + { { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5 +$as_echo "$as_me: error: in \`$ac_pwd':" >&2;} +as_fn_error $? "cannot compute suffix of executables: cannot compile and link +See \`config.log' for more details" "$LINENO" 5; } +fi +rm -f conftest conftest$ac_cv_exeext +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_exeext" >&5 +$as_echo "$ac_cv_exeext" >&6; } + +rm -f conftest.$ac_ext +EXEEXT=$ac_cv_exeext +ac_exeext=$EXEEXT +cat confdefs.h - <<_ACEOF >conftest.$ac_ext +/* end confdefs.h. */ +@%:@include +int +main () +{ +FILE *f = fopen ("conftest.out", "w"); + return ferror (f) || fclose (f) != 0; + + ; + return 0; +} +_ACEOF +ac_clean_files="$ac_clean_files conftest.out" +# Check that the compiler produces executables we can run. If not, either +# the compiler is broken, or we cross compile. +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether we are cross compiling" >&5 +$as_echo_n "checking whether we are cross compiling... " >&6; } +if test "$cross_compiling" != yes; then + { { ac_try="$ac_link" +case "(($ac_try" in + *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; + *) ac_try_echo=$ac_try;; +esac +eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\"" +$as_echo "$ac_try_echo"; } >&5 + (eval "$ac_link") 2>&5 + ac_status=$? + $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 + test $ac_status = 0; } + if { ac_try='./conftest$ac_cv_exeext' + { { case "(($ac_try" in + *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; + *) ac_try_echo=$ac_try;; +esac +eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\"" +$as_echo "$ac_try_echo"; } >&5 + (eval "$ac_try") 2>&5 + ac_status=$? + $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 + test $ac_status = 0; }; }; then + cross_compiling=no + else + if test "$cross_compiling" = maybe; then + cross_compiling=yes + else + { { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5 +$as_echo "$as_me: error: in \`$ac_pwd':" >&2;} +as_fn_error $? "cannot run C compiled programs. +If you meant to cross compile, use \`--host'. +See \`config.log' for more details" "$LINENO" 5; } + fi + fi +fi +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $cross_compiling" >&5 +$as_echo "$cross_compiling" >&6; } + +rm -f conftest.$ac_ext conftest$ac_cv_exeext conftest.out +ac_clean_files=$ac_clean_files_save +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for suffix of object files" >&5 +$as_echo_n "checking for suffix of object files... " >&6; } +if ${ac_cv_objext+:} false; then : + $as_echo_n "(cached) " >&6 +else + cat confdefs.h - <<_ACEOF >conftest.$ac_ext +/* end confdefs.h. */ + +int +main () +{ + + ; + return 0; +} +_ACEOF +rm -f conftest.o conftest.obj +if { { ac_try="$ac_compile" +case "(($ac_try" in + *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; + *) ac_try_echo=$ac_try;; +esac +eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\"" +$as_echo "$ac_try_echo"; } >&5 + (eval "$ac_compile") 2>&5 + ac_status=$? + $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 + test $ac_status = 0; }; then : + for ac_file in conftest.o conftest.obj conftest.*; do + test -f "$ac_file" || continue; + case $ac_file in + *.$ac_ext | *.xcoff | *.tds | *.d | *.pdb | *.xSYM | *.bb | *.bbg | *.map | *.inf | *.dSYM ) ;; + *) ac_cv_objext=`expr "$ac_file" : '.*\.\(.*\)'` + break;; + esac +done +else + $as_echo "$as_me: failed program was:" >&5 +sed 's/^/| /' conftest.$ac_ext >&5 + +{ { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5 +$as_echo "$as_me: error: in \`$ac_pwd':" >&2;} +as_fn_error $? "cannot compute suffix of object files: cannot compile +See \`config.log' for more details" "$LINENO" 5; } +fi +rm -f conftest.$ac_cv_objext conftest.$ac_ext +fi +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_objext" >&5 +$as_echo "$ac_cv_objext" >&6; } +OBJEXT=$ac_cv_objext +ac_objext=$OBJEXT +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether we are using the GNU C compiler" >&5 +$as_echo_n "checking whether we are using the GNU C compiler... " >&6; } +if ${ac_cv_c_compiler_gnu+:} false; then : + $as_echo_n "(cached) " >&6 +else + cat confdefs.h - <<_ACEOF >conftest.$ac_ext +/* end confdefs.h. */ + +int +main () +{ +#ifndef __GNUC__ + choke me +#endif + + ; + return 0; +} +_ACEOF +if ac_fn_c_try_compile "$LINENO"; then : + ac_compiler_gnu=yes +else + ac_compiler_gnu=no +fi +rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext +ac_cv_c_compiler_gnu=$ac_compiler_gnu + +fi +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_c_compiler_gnu" >&5 +$as_echo "$ac_cv_c_compiler_gnu" >&6; } +if test $ac_compiler_gnu = yes; then + GCC=yes +else + GCC= +fi +ac_test_CFLAGS=${CFLAGS+set} +ac_save_CFLAGS=$CFLAGS +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether $CC accepts -g" >&5 +$as_echo_n "checking whether $CC accepts -g... " >&6; } +if ${ac_cv_prog_cc_g+:} false; then : + $as_echo_n "(cached) " >&6 +else + ac_save_c_werror_flag=$ac_c_werror_flag + ac_c_werror_flag=yes + ac_cv_prog_cc_g=no + CFLAGS="-g" + cat confdefs.h - <<_ACEOF >conftest.$ac_ext +/* end confdefs.h. */ + +int +main () +{ + + ; + return 0; +} +_ACEOF +if ac_fn_c_try_compile "$LINENO"; then : + ac_cv_prog_cc_g=yes +else + CFLAGS="" + cat confdefs.h - <<_ACEOF >conftest.$ac_ext +/* end confdefs.h. */ + +int +main () +{ + + ; + return 0; +} +_ACEOF +if ac_fn_c_try_compile "$LINENO"; then : + +else + ac_c_werror_flag=$ac_save_c_werror_flag + CFLAGS="-g" + cat confdefs.h - <<_ACEOF >conftest.$ac_ext +/* end confdefs.h. */ + +int +main () +{ + + ; + return 0; +} +_ACEOF +if ac_fn_c_try_compile "$LINENO"; then : + ac_cv_prog_cc_g=yes +fi +rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext +fi +rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext +fi +rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext + ac_c_werror_flag=$ac_save_c_werror_flag +fi +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_prog_cc_g" >&5 +$as_echo "$ac_cv_prog_cc_g" >&6; } +if test "$ac_test_CFLAGS" = set; then + CFLAGS=$ac_save_CFLAGS +elif test $ac_cv_prog_cc_g = yes; then + if test "$GCC" = yes; then + CFLAGS="-g -O2" + else + CFLAGS="-g" + fi +else + if test "$GCC" = yes; then + CFLAGS="-O2" + else + CFLAGS= + fi +fi +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $CC option to accept ISO C89" >&5 +$as_echo_n "checking for $CC option to accept ISO C89... " >&6; } +if ${ac_cv_prog_cc_c89+:} false; then : + $as_echo_n "(cached) " >&6 +else + ac_cv_prog_cc_c89=no +ac_save_CC=$CC +cat confdefs.h - <<_ACEOF >conftest.$ac_ext +/* end confdefs.h. */ +#include +#include +struct stat; +/* Most of the following tests are stolen from RCS 5.7's src/conf.sh. */ +struct buf { int x; }; +FILE * (*rcsopen) (struct buf *, struct stat *, int); +static char *e (p, i) + char **p; + int i; +{ + return p[i]; +} +static char *f (char * (*g) (char **, int), char **p, ...) +{ + char *s; + va_list v; + va_start (v,p); + s = g (p, va_arg (v,int)); + va_end (v); + return s; +} + +/* OSF 4.0 Compaq cc is some sort of almost-ANSI by default. It has + function prototypes and stuff, but not '\xHH' hex character constants. + These don't provoke an error unfortunately, instead are silently treated + as 'x'. The following induces an error, until -std is added to get + proper ANSI mode. Curiously '\x00'!='x' always comes out true, for an + array size at least. It's necessary to write '\x00'==0 to get something + that's true only with -std. */ +int osf4_cc_array ['\x00' == 0 ? 1 : -1]; + +/* IBM C 6 for AIX is almost-ANSI by default, but it replaces macro parameters + inside strings and character constants. */ +#define FOO(x) 'x' +int xlc6_cc_array[FOO(a) == 'x' ? 1 : -1]; + +int test (int i, double x); +struct s1 {int (*f) (int a);}; +struct s2 {int (*f) (double a);}; +int pairnames (int, char **, FILE *(*)(struct buf *, struct stat *, int), int, int); +int argc; +char **argv; +int +main () +{ +return f (e, argv, 0) != argv[0] || f (e, argv, 1) != argv[1]; + ; + return 0; +} +_ACEOF +for ac_arg in '' -qlanglvl=extc89 -qlanglvl=ansi -std \ + -Ae "-Aa -D_HPUX_SOURCE" "-Xc -D__EXTENSIONS__" +do + CC="$ac_save_CC $ac_arg" + if ac_fn_c_try_compile "$LINENO"; then : + ac_cv_prog_cc_c89=$ac_arg +fi +rm -f core conftest.err conftest.$ac_objext + test "x$ac_cv_prog_cc_c89" != "xno" && break +done +rm -f conftest.$ac_ext +CC=$ac_save_CC + +fi +# AC_CACHE_VAL +case "x$ac_cv_prog_cc_c89" in + x) + { $as_echo "$as_me:${as_lineno-$LINENO}: result: none needed" >&5 +$as_echo "none needed" >&6; } ;; + xno) + { $as_echo "$as_me:${as_lineno-$LINENO}: result: unsupported" >&5 +$as_echo "unsupported" >&6; } ;; + *) + CC="$CC $ac_cv_prog_cc_c89" + { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_prog_cc_c89" >&5 +$as_echo "$ac_cv_prog_cc_c89" >&6; } ;; +esac +if test "x$ac_cv_prog_cc_c89" != xno; then : + +fi + +ac_ext=c +ac_cpp='$CPP $CPPFLAGS' +ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5' +ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5' +ac_compiler_gnu=$ac_cv_c_compiler_gnu + +ac_ext=c +ac_cpp='$CPP $CPPFLAGS' +ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5' +ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5' +ac_compiler_gnu=$ac_cv_c_compiler_gnu +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether $CC understands -c and -o together" >&5 +$as_echo_n "checking whether $CC understands -c and -o together... " >&6; } +if ${am_cv_prog_cc_c_o+:} false; then : + $as_echo_n "(cached) " >&6 +else + cat confdefs.h - <<_ACEOF >conftest.$ac_ext +/* end confdefs.h. */ + +int +main () +{ + + ; + return 0; +} +_ACEOF + # Make sure it works both with $CC and with simple cc. + # Following AC_PROG_CC_C_O, we do the test twice because some + # compilers refuse to overwrite an existing .o file with -o, + # though they will create one. + am_cv_prog_cc_c_o=yes + for am_i in 1 2; do + if { echo "$as_me:$LINENO: $CC -c conftest.$ac_ext -o conftest2.$ac_objext" >&5 + ($CC -c conftest.$ac_ext -o conftest2.$ac_objext) >&5 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } \ + && test -f conftest2.$ac_objext; then + : OK + else + am_cv_prog_cc_c_o=no + break + fi + done + rm -f core conftest* + unset am_i +fi +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $am_cv_prog_cc_c_o" >&5 +$as_echo "$am_cv_prog_cc_c_o" >&6; } +if test "$am_cv_prog_cc_c_o" != yes; then + # Losing compiler, so override with the script. + # FIXME: It is wrong to rewrite CC. + # But if we don't then we get into trouble of one sort or another. + # A longer-term fix would be to have automake use am__CC in this case, + # and then we could set am__CC="\$(top_srcdir)/compile \$(CC)" + CC="$am_aux_dir/compile $CC" +fi +ac_ext=c +ac_cpp='$CPP $CPPFLAGS' +ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5' +ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5' +ac_compiler_gnu=$ac_cv_c_compiler_gnu + +DEPDIR="${am__leading_dot}deps" + +ac_config_commands="$ac_config_commands depfiles" + + +am_make=${MAKE-make} +cat > confinc << 'END' +am__doit: + @echo this is the am__doit target +.PHONY: am__doit +END +# If we don't find an include directive, just comment out the code. +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for style of include used by $am_make" >&5 +$as_echo_n "checking for style of include used by $am_make... " >&6; } +am__include="#" +am__quote= +_am_result=none +# First try GNU make style include. +echo "include confinc" > confmf +# Ignore all kinds of additional output from 'make'. +case `$am_make -s -f confmf 2> /dev/null` in #( +*the\ am__doit\ target*) + am__include=include + am__quote= + _am_result=GNU + ;; +esac +# Now try BSD make style include. +if test "$am__include" = "#"; then + echo '.include "confinc"' > confmf + case `$am_make -s -f confmf 2> /dev/null` in #( + *the\ am__doit\ target*) + am__include=.include + am__quote="\"" + _am_result=BSD + ;; + esac +fi + + +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $_am_result" >&5 +$as_echo "$_am_result" >&6; } +rm -f confinc confmf + +@%:@ Check whether --enable-dependency-tracking was given. +if test "${enable_dependency_tracking+set}" = set; then : + enableval=$enable_dependency_tracking; +fi + +if test "x$enable_dependency_tracking" != xno; then + am_depcomp="$ac_aux_dir/depcomp" + AMDEPBACKSLASH='\' + am__nodep='_no' +fi + if test "x$enable_dependency_tracking" != xno; then + AMDEP_TRUE= + AMDEP_FALSE='#' +else + AMDEP_TRUE='#' + AMDEP_FALSE= +fi + + + +depcc="$CC" am_compiler_list= + +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking dependency style of $depcc" >&5 +$as_echo_n "checking dependency style of $depcc... " >&6; } +if ${am_cv_CC_dependencies_compiler_type+:} false; then : + $as_echo_n "(cached) " >&6 +else + if test -z "$AMDEP_TRUE" && test -f "$am_depcomp"; then + # We make a subdir and do the tests there. Otherwise we can end up + # making bogus files that we don't know about and never remove. For + # instance it was reported that on HP-UX the gcc test will end up + # making a dummy file named 'D' -- because '-MD' means "put the output + # in D". + rm -rf conftest.dir + mkdir conftest.dir + # Copy depcomp to subdir because otherwise we won't find it if we're + # using a relative directory. + cp "$am_depcomp" conftest.dir + cd conftest.dir + # We will build objects and dependencies in a subdirectory because + # it helps to detect inapplicable dependency modes. For instance + # both Tru64's cc and ICC support -MD to output dependencies as a + # side effect of compilation, but ICC will put the dependencies in + # the current directory while Tru64 will put them in the object + # directory. + mkdir sub + + am_cv_CC_dependencies_compiler_type=none + if test "$am_compiler_list" = ""; then + am_compiler_list=`sed -n 's/^#*\([a-zA-Z0-9]*\))$/\1/p' < ./depcomp` + fi + am__universal=false + case " $depcc " in #( + *\ -arch\ *\ -arch\ *) am__universal=true ;; + esac + + for depmode in $am_compiler_list; do + # Setup a source with many dependencies, because some compilers + # like to wrap large dependency lists on column 80 (with \), and + # we should not choose a depcomp mode which is confused by this. + # + # We need to recreate these files for each test, as the compiler may + # overwrite some of them when testing with obscure command lines. + # This happens at least with the AIX C compiler. + : > sub/conftest.c + for i in 1 2 3 4 5 6; do + echo '#include "conftst'$i'.h"' >> sub/conftest.c + # Using ": > sub/conftst$i.h" creates only sub/conftst1.h with + # Solaris 10 /bin/sh. + echo '/* dummy */' > sub/conftst$i.h + done + echo "${am__include} ${am__quote}sub/conftest.Po${am__quote}" > confmf + + # We check with '-c' and '-o' for the sake of the "dashmstdout" + # mode. It turns out that the SunPro C++ compiler does not properly + # handle '-M -o', and we need to detect this. Also, some Intel + # versions had trouble with output in subdirs. + am__obj=sub/conftest.${OBJEXT-o} + am__minus_obj="-o $am__obj" + case $depmode in + gcc) + # This depmode causes a compiler race in universal mode. + test "$am__universal" = false || continue + ;; + nosideeffect) + # After this tag, mechanisms are not by side-effect, so they'll + # only be used when explicitly requested. + if test "x$enable_dependency_tracking" = xyes; then + continue + else + break + fi + ;; + msvc7 | msvc7msys | msvisualcpp | msvcmsys) + # This compiler won't grok '-c -o', but also, the minuso test has + # not run yet. These depmodes are late enough in the game, and + # so weak that their functioning should not be impacted. + am__obj=conftest.${OBJEXT-o} + am__minus_obj= + ;; + none) break ;; + esac + if depmode=$depmode \ + source=sub/conftest.c object=$am__obj \ + depfile=sub/conftest.Po tmpdepfile=sub/conftest.TPo \ + $SHELL ./depcomp $depcc -c $am__minus_obj sub/conftest.c \ + >/dev/null 2>conftest.err && + grep sub/conftst1.h sub/conftest.Po > /dev/null 2>&1 && + grep sub/conftst6.h sub/conftest.Po > /dev/null 2>&1 && + grep $am__obj sub/conftest.Po > /dev/null 2>&1 && + ${MAKE-make} -s -f confmf > /dev/null 2>&1; then + # icc doesn't choke on unknown options, it will just issue warnings + # or remarks (even with -Werror). So we grep stderr for any message + # that says an option was ignored or not supported. + # When given -MP, icc 7.0 and 7.1 complain thusly: + # icc: Command line warning: ignoring option '-M'; no argument required + # The diagnosis changed in icc 8.0: + # icc: Command line remark: option '-MP' not supported + if (grep 'ignoring option' conftest.err || + grep 'not supported' conftest.err) >/dev/null 2>&1; then :; else + am_cv_CC_dependencies_compiler_type=$depmode + break + fi + fi + done + + cd .. + rm -rf conftest.dir +else + am_cv_CC_dependencies_compiler_type=none +fi + +fi +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $am_cv_CC_dependencies_compiler_type" >&5 +$as_echo "$am_cv_CC_dependencies_compiler_type" >&6; } +CCDEPMODE=depmode=$am_cv_CC_dependencies_compiler_type + + if + test "x$enable_dependency_tracking" != xno \ + && test "$am_cv_CC_dependencies_compiler_type" = gcc3; then + am__fastdepCC_TRUE= + am__fastdepCC_FALSE='#' +else + am__fastdepCC_TRUE='#' + am__fastdepCC_FALSE= +fi + + + + + +# Checks for libraries. + +# Checks for header files. + +# Checks for typedefs, structures, and compiler characteristics. + +# Checks for library functions. + +ac_config_files="$ac_config_files Makefile" + +cat >confcache <<\_ACEOF +# This file is a shell script that caches the results of configure +# tests run on this system so they can be shared between configure +# scripts and configure runs, see configure's option --config-cache. +# It is not useful on other systems. If it contains results you don't +# want to keep, you may remove or edit it. +# +# config.status only pays attention to the cache file if you give it +# the --recheck option to rerun configure. +# +# `ac_cv_env_foo' variables (set or unset) will be overridden when +# loading this file, other *unset* `ac_cv_foo' will be assigned the +# following values. + +_ACEOF + +# The following way of writing the cache mishandles newlines in values, +# but we know of no workaround that is simple, portable, and efficient. +# So, we kill variables containing newlines. +# Ultrix sh set writes to stderr and can't be redirected directly, +# and sets the high bit in the cache file unless we assign to the vars. +( + for ac_var in `(set) 2>&1 | sed -n 's/^\([a-zA-Z_][a-zA-Z0-9_]*\)=.*/\1/p'`; do + eval ac_val=\$$ac_var + case $ac_val in #( + *${as_nl}*) + case $ac_var in #( + *_cv_*) { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: cache variable $ac_var contains a newline" >&5 +$as_echo "$as_me: WARNING: cache variable $ac_var contains a newline" >&2;} ;; + esac + case $ac_var in #( + _ | IFS | as_nl) ;; #( + BASH_ARGV | BASH_SOURCE) eval $ac_var= ;; #( + *) { eval $ac_var=; unset $ac_var;} ;; + esac ;; + esac + done + + (set) 2>&1 | + case $as_nl`(ac_space=' '; set) 2>&1` in #( + *${as_nl}ac_space=\ *) + # `set' does not quote correctly, so add quotes: double-quote + # substitution turns \\\\ into \\, and sed turns \\ into \. + sed -n \ + "s/'/'\\\\''/g; + s/^\\([_$as_cr_alnum]*_cv_[_$as_cr_alnum]*\\)=\\(.*\\)/\\1='\\2'/p" + ;; #( + *) + # `set' quotes correctly as required by POSIX, so do not add quotes. + sed -n "/^[_$as_cr_alnum]*_cv_[_$as_cr_alnum]*=/p" + ;; + esac | + sort +) | + sed ' + /^ac_cv_env_/b end + t clear + :clear + s/^\([^=]*\)=\(.*[{}].*\)$/test "${\1+set}" = set || &/ + t end + s/^\([^=]*\)=\(.*\)$/\1=${\1=\2}/ + :end' >>confcache +if diff "$cache_file" confcache >/dev/null 2>&1; then :; else + if test -w "$cache_file"; then + if test "x$cache_file" != "x/dev/null"; then + { $as_echo "$as_me:${as_lineno-$LINENO}: updating cache $cache_file" >&5 +$as_echo "$as_me: updating cache $cache_file" >&6;} + if test ! -f "$cache_file" || test -h "$cache_file"; then + cat confcache >"$cache_file" + else + case $cache_file in #( + */* | ?:*) + mv -f confcache "$cache_file"$$ && + mv -f "$cache_file"$$ "$cache_file" ;; #( + *) + mv -f confcache "$cache_file" ;; + esac + fi + fi + else + { $as_echo "$as_me:${as_lineno-$LINENO}: not updating unwritable cache $cache_file" >&5 +$as_echo "$as_me: not updating unwritable cache $cache_file" >&6;} + fi +fi +rm -f confcache + +test "x$prefix" = xNONE && prefix=$ac_default_prefix +# Let make expand exec_prefix. +test "x$exec_prefix" = xNONE && exec_prefix='${prefix}' + +DEFS=-DHAVE_CONFIG_H + +ac_libobjs= +ac_ltlibobjs= +U= +for ac_i in : $LIB@&t@OBJS; do test "x$ac_i" = x: && continue + # 1. Remove the extension, and $U if already installed. + ac_script='s/\$U\././;s/\.o$//;s/\.obj$//' + ac_i=`$as_echo "$ac_i" | sed "$ac_script"` + # 2. Prepend LIBOBJDIR. When used with automake>=1.10 LIBOBJDIR + # will be set to the directory where LIBOBJS objects are built. + as_fn_append ac_libobjs " \${LIBOBJDIR}$ac_i\$U.$ac_objext" + as_fn_append ac_ltlibobjs " \${LIBOBJDIR}$ac_i"'$U.lo' +done +LIB@&t@OBJS=$ac_libobjs + +LTLIBOBJS=$ac_ltlibobjs + + +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking that generated files are newer than configure" >&5 +$as_echo_n "checking that generated files are newer than configure... " >&6; } + if test -n "$am_sleep_pid"; then + # Hide warnings about reused PIDs. + wait $am_sleep_pid 2>/dev/null + fi + { $as_echo "$as_me:${as_lineno-$LINENO}: result: done" >&5 +$as_echo "done" >&6; } + if test -n "$EXEEXT"; then + am__EXEEXT_TRUE= + am__EXEEXT_FALSE='#' +else + am__EXEEXT_TRUE='#' + am__EXEEXT_FALSE= +fi + +if test -z "${AMDEP_TRUE}" && test -z "${AMDEP_FALSE}"; then + as_fn_error $? "conditional \"AMDEP\" was never defined. +Usually this means the macro was only invoked conditionally." "$LINENO" 5 +fi +if test -z "${am__fastdepCC_TRUE}" && test -z "${am__fastdepCC_FALSE}"; then + as_fn_error $? "conditional \"am__fastdepCC\" was never defined. +Usually this means the macro was only invoked conditionally." "$LINENO" 5 +fi + +: "${CONFIG_STATUS=./config.status}" +ac_write_fail=0 +ac_clean_files_save=$ac_clean_files +ac_clean_files="$ac_clean_files $CONFIG_STATUS" +{ $as_echo "$as_me:${as_lineno-$LINENO}: creating $CONFIG_STATUS" >&5 +$as_echo "$as_me: creating $CONFIG_STATUS" >&6;} +as_write_fail=0 +cat >$CONFIG_STATUS <<_ASEOF || as_write_fail=1 +#! $SHELL +# Generated by $as_me. +# Run this file to recreate the current configuration. +# Compiler output produced by configure, useful for debugging +# configure, is in config.log if it exists. + +debug=false +ac_cs_recheck=false +ac_cs_silent=false + +SHELL=\${CONFIG_SHELL-$SHELL} +export SHELL +_ASEOF +cat >>$CONFIG_STATUS <<\_ASEOF || as_write_fail=1 +## -------------------- ## +## M4sh Initialization. ## +## -------------------- ## + +# Be more Bourne compatible +DUALCASE=1; export DUALCASE # for MKS sh +if test -n "${ZSH_VERSION+set}" && (emulate sh) >/dev/null 2>&1; then : + emulate sh + NULLCMD=: + # Pre-4.2 versions of Zsh do word splitting on ${1+"$@"}, which + # is contrary to our usage. Disable this feature. + alias -g '${1+"$@"}'='"$@"' + setopt NO_GLOB_SUBST +else + case `(set -o) 2>/dev/null` in @%:@( + *posix*) : + set -o posix ;; @%:@( + *) : + ;; +esac +fi + + +as_nl=' +' +export as_nl +# Printing a long string crashes Solaris 7 /usr/bin/printf. +as_echo='\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\' +as_echo=$as_echo$as_echo$as_echo$as_echo$as_echo +as_echo=$as_echo$as_echo$as_echo$as_echo$as_echo$as_echo +# Prefer a ksh shell builtin over an external printf program on Solaris, +# but without wasting forks for bash or zsh. +if test -z "$BASH_VERSION$ZSH_VERSION" \ + && (test "X`print -r -- $as_echo`" = "X$as_echo") 2>/dev/null; then + as_echo='print -r --' + as_echo_n='print -rn --' +elif (test "X`printf %s $as_echo`" = "X$as_echo") 2>/dev/null; then + as_echo='printf %s\n' + as_echo_n='printf %s' +else + if test "X`(/usr/ucb/echo -n -n $as_echo) 2>/dev/null`" = "X-n $as_echo"; then + as_echo_body='eval /usr/ucb/echo -n "$1$as_nl"' + as_echo_n='/usr/ucb/echo -n' + else + as_echo_body='eval expr "X$1" : "X\\(.*\\)"' + as_echo_n_body='eval + arg=$1; + case $arg in @%:@( + *"$as_nl"*) + expr "X$arg" : "X\\(.*\\)$as_nl"; + arg=`expr "X$arg" : ".*$as_nl\\(.*\\)"`;; + esac; + expr "X$arg" : "X\\(.*\\)" | tr -d "$as_nl" + ' + export as_echo_n_body + as_echo_n='sh -c $as_echo_n_body as_echo' + fi + export as_echo_body + as_echo='sh -c $as_echo_body as_echo' +fi + +# The user is always right. +if test "${PATH_SEPARATOR+set}" != set; then + PATH_SEPARATOR=: + (PATH='/bin;/bin'; FPATH=$PATH; sh -c :) >/dev/null 2>&1 && { + (PATH='/bin:/bin'; FPATH=$PATH; sh -c :) >/dev/null 2>&1 || + PATH_SEPARATOR=';' + } +fi + + +# IFS +# We need space, tab and new line, in precisely that order. Quoting is +# there to prevent editors from complaining about space-tab. +# (If _AS_PATH_WALK were called with IFS unset, it would disable word +# splitting by setting IFS to empty value.) +IFS=" "" $as_nl" + +# Find who we are. Look in the path if we contain no directory separator. +as_myself= +case $0 in @%:@(( + *[\\/]* ) as_myself=$0 ;; + *) as_save_IFS=$IFS; IFS=$PATH_SEPARATOR +for as_dir in $PATH +do + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. + test -r "$as_dir/$0" && as_myself=$as_dir/$0 && break + done +IFS=$as_save_IFS + + ;; +esac +# We did not find ourselves, most probably we were run as `sh COMMAND' +# in which case we are not to be found in the path. +if test "x$as_myself" = x; then + as_myself=$0 +fi +if test ! -f "$as_myself"; then + $as_echo "$as_myself: error: cannot find myself; rerun with an absolute file name" >&2 + exit 1 +fi + +# Unset variables that we do not need and which cause bugs (e.g. in +# pre-3.0 UWIN ksh). But do not cause bugs in bash 2.01; the "|| exit 1" +# suppresses any "Segmentation fault" message there. '((' could +# trigger a bug in pdksh 5.2.14. +for as_var in BASH_ENV ENV MAIL MAILPATH +do eval test x\${$as_var+set} = xset \ + && ( (unset $as_var) || exit 1) >/dev/null 2>&1 && unset $as_var || : +done +PS1='$ ' +PS2='> ' +PS4='+ ' + +# NLS nuisances. +LC_ALL=C +export LC_ALL +LANGUAGE=C +export LANGUAGE + +# CDPATH. +(unset CDPATH) >/dev/null 2>&1 && unset CDPATH + + +@%:@ as_fn_error STATUS ERROR [LINENO LOG_FD] +@%:@ ---------------------------------------- +@%:@ Output "`basename @S|@0`: error: ERROR" to stderr. If LINENO and LOG_FD are +@%:@ provided, also output the error to LOG_FD, referencing LINENO. Then exit the +@%:@ script with STATUS, using 1 if that was 0. +as_fn_error () +{ + as_status=$1; test $as_status -eq 0 && as_status=1 + if test "$4"; then + as_lineno=${as_lineno-"$3"} as_lineno_stack=as_lineno_stack=$as_lineno_stack + $as_echo "$as_me:${as_lineno-$LINENO}: error: $2" >&$4 + fi + $as_echo "$as_me: error: $2" >&2 + as_fn_exit $as_status +} @%:@ as_fn_error + + +@%:@ as_fn_set_status STATUS +@%:@ ----------------------- +@%:@ Set @S|@? to STATUS, without forking. +as_fn_set_status () +{ + return $1 +} @%:@ as_fn_set_status + +@%:@ as_fn_exit STATUS +@%:@ ----------------- +@%:@ Exit the shell with STATUS, even in a "trap 0" or "set -e" context. +as_fn_exit () +{ + set +e + as_fn_set_status $1 + exit $1 +} @%:@ as_fn_exit + +@%:@ as_fn_unset VAR +@%:@ --------------- +@%:@ Portably unset VAR. +as_fn_unset () +{ + { eval $1=; unset $1;} +} +as_unset=as_fn_unset +@%:@ as_fn_append VAR VALUE +@%:@ ---------------------- +@%:@ Append the text in VALUE to the end of the definition contained in VAR. Take +@%:@ advantage of any shell optimizations that allow amortized linear growth over +@%:@ repeated appends, instead of the typical quadratic growth present in naive +@%:@ implementations. +if (eval "as_var=1; as_var+=2; test x\$as_var = x12") 2>/dev/null; then : + eval 'as_fn_append () + { + eval $1+=\$2 + }' +else + as_fn_append () + { + eval $1=\$$1\$2 + } +fi # as_fn_append + +@%:@ as_fn_arith ARG... +@%:@ ------------------ +@%:@ Perform arithmetic evaluation on the ARGs, and store the result in the +@%:@ global @S|@as_val. Take advantage of shells that can avoid forks. The arguments +@%:@ must be portable across @S|@(()) and expr. +if (eval "test \$(( 1 + 1 )) = 2") 2>/dev/null; then : + eval 'as_fn_arith () + { + as_val=$(( $* )) + }' +else + as_fn_arith () + { + as_val=`expr "$@" || test $? -eq 1` + } +fi # as_fn_arith + + +if expr a : '\(a\)' >/dev/null 2>&1 && + test "X`expr 00001 : '.*\(...\)'`" = X001; then + as_expr=expr +else + as_expr=false +fi + +if (basename -- /) >/dev/null 2>&1 && test "X`basename -- / 2>&1`" = "X/"; then + as_basename=basename +else + as_basename=false +fi + +if (as_dir=`dirname -- /` && test "X$as_dir" = X/) >/dev/null 2>&1; then + as_dirname=dirname +else + as_dirname=false +fi + +as_me=`$as_basename -- "$0" || +$as_expr X/"$0" : '.*/\([^/][^/]*\)/*$' \| \ + X"$0" : 'X\(//\)$' \| \ + X"$0" : 'X\(/\)' \| . 2>/dev/null || +$as_echo X/"$0" | + sed '/^.*\/\([^/][^/]*\)\/*$/{ + s//\1/ + q + } + /^X\/\(\/\/\)$/{ + s//\1/ + q + } + /^X\/\(\/\).*/{ + s//\1/ + q + } + s/.*/./; q'` + +# Avoid depending upon Character Ranges. +as_cr_letters='abcdefghijklmnopqrstuvwxyz' +as_cr_LETTERS='ABCDEFGHIJKLMNOPQRSTUVWXYZ' +as_cr_Letters=$as_cr_letters$as_cr_LETTERS +as_cr_digits='0123456789' +as_cr_alnum=$as_cr_Letters$as_cr_digits + +ECHO_C= ECHO_N= ECHO_T= +case `echo -n x` in @%:@((((( +-n*) + case `echo 'xy\c'` in + *c*) ECHO_T=' ';; # ECHO_T is single tab character. + xy) ECHO_C='\c';; + *) echo `echo ksh88 bug on AIX 6.1` > /dev/null + ECHO_T=' ';; + esac;; +*) + ECHO_N='-n';; +esac + +rm -f conf$$ conf$$.exe conf$$.file +if test -d conf$$.dir; then + rm -f conf$$.dir/conf$$.file +else + rm -f conf$$.dir + mkdir conf$$.dir 2>/dev/null +fi +if (echo >conf$$.file) 2>/dev/null; then + if ln -s conf$$.file conf$$ 2>/dev/null; then + as_ln_s='ln -s' + # ... but there are two gotchas: + # 1) On MSYS, both `ln -s file dir' and `ln file dir' fail. + # 2) DJGPP < 2.04 has no symlinks; `ln -s' creates a wrapper executable. + # In both cases, we have to default to `cp -pR'. + ln -s conf$$.file conf$$.dir 2>/dev/null && test ! -f conf$$.exe || + as_ln_s='cp -pR' + elif ln conf$$.file conf$$ 2>/dev/null; then + as_ln_s=ln + else + as_ln_s='cp -pR' + fi +else + as_ln_s='cp -pR' +fi +rm -f conf$$ conf$$.exe conf$$.dir/conf$$.file conf$$.file +rmdir conf$$.dir 2>/dev/null + + +@%:@ as_fn_mkdir_p +@%:@ ------------- +@%:@ Create "@S|@as_dir" as a directory, including parents if necessary. +as_fn_mkdir_p () +{ + + case $as_dir in #( + -*) as_dir=./$as_dir;; + esac + test -d "$as_dir" || eval $as_mkdir_p || { + as_dirs= + while :; do + case $as_dir in #( + *\'*) as_qdir=`$as_echo "$as_dir" | sed "s/'/'\\\\\\\\''/g"`;; #'( + *) as_qdir=$as_dir;; + esac + as_dirs="'$as_qdir' $as_dirs" + as_dir=`$as_dirname -- "$as_dir" || +$as_expr X"$as_dir" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \ + X"$as_dir" : 'X\(//\)[^/]' \| \ + X"$as_dir" : 'X\(//\)$' \| \ + X"$as_dir" : 'X\(/\)' \| . 2>/dev/null || +$as_echo X"$as_dir" | + sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ + s//\1/ + q + } + /^X\(\/\/\)[^/].*/{ + s//\1/ + q + } + /^X\(\/\/\)$/{ + s//\1/ + q + } + /^X\(\/\).*/{ + s//\1/ + q + } + s/.*/./; q'` + test -d "$as_dir" && break + done + test -z "$as_dirs" || eval "mkdir $as_dirs" + } || test -d "$as_dir" || as_fn_error $? "cannot create directory $as_dir" + + +} @%:@ as_fn_mkdir_p +if mkdir -p . 2>/dev/null; then + as_mkdir_p='mkdir -p "$as_dir"' +else + test -d ./-p && rmdir ./-p + as_mkdir_p=false +fi + + +@%:@ as_fn_executable_p FILE +@%:@ ----------------------- +@%:@ Test if FILE is an executable regular file. +as_fn_executable_p () +{ + test -f "$1" && test -x "$1" +} @%:@ as_fn_executable_p +as_test_x='test -x' +as_executable_p=as_fn_executable_p + +# Sed expression to map a string onto a valid CPP name. +as_tr_cpp="eval sed 'y%*$as_cr_letters%P$as_cr_LETTERS%;s%[^_$as_cr_alnum]%_%g'" + +# Sed expression to map a string onto a valid variable name. +as_tr_sh="eval sed 'y%*+%pp%;s%[^_$as_cr_alnum]%_%g'" + + +exec 6>&1 +## ----------------------------------- ## +## Main body of $CONFIG_STATUS script. ## +## ----------------------------------- ## +_ASEOF +test $as_write_fail = 0 && chmod +x $CONFIG_STATUS || ac_write_fail=1 + +cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1 +# Save the log message, to keep $0 and so on meaningful, and to +# report actual input values of CONFIG_FILES etc. instead of their +# values after options handling. +ac_log=" +This file was extended by autohello $as_me 1.1, which was +generated by GNU Autoconf 2.69. Invocation command line was + + CONFIG_FILES = $CONFIG_FILES + CONFIG_HEADERS = $CONFIG_HEADERS + CONFIG_LINKS = $CONFIG_LINKS + CONFIG_COMMANDS = $CONFIG_COMMANDS + $ $0 $@ + +on `(hostname || uname -n) 2>/dev/null | sed 1q` +" + +_ACEOF + +case $ac_config_files in *" +"*) set x $ac_config_files; shift; ac_config_files=$*;; +esac + +case $ac_config_headers in *" +"*) set x $ac_config_headers; shift; ac_config_headers=$*;; +esac + + +cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1 +# Files that config.status was made for. +config_files="$ac_config_files" +config_headers="$ac_config_headers" +config_commands="$ac_config_commands" + +_ACEOF + +cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1 +ac_cs_usage="\ +\`$as_me' instantiates files and other configuration actions +from templates according to the current configuration. Unless the files +and actions are specified as TAGs, all are instantiated by default. + +Usage: $0 [OPTION]... [TAG]... + + -h, --help print this help, then exit + -V, --version print version number and configuration settings, then exit + --config print configuration, then exit + -q, --quiet, --silent + do not print progress messages + -d, --debug don't remove temporary files + --recheck update $as_me by reconfiguring in the same conditions + --file=FILE[:TEMPLATE] + instantiate the configuration file FILE + --header=FILE[:TEMPLATE] + instantiate the configuration header FILE + +Configuration files: +$config_files + +Configuration headers: +$config_headers + +Configuration commands: +$config_commands + +Report bugs to ." + +_ACEOF +cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1 +ac_cs_config="`$as_echo "$ac_configure_args" | sed 's/^ //; s/[\\""\`\$]/\\\\&/g'`" +ac_cs_version="\\ +autohello config.status 1.1 +configured by $0, generated by GNU Autoconf 2.69, + with options \\"\$ac_cs_config\\" + +Copyright (C) 2012 Free Software Foundation, Inc. +This config.status script is free software; the Free Software Foundation +gives unlimited permission to copy, distribute and modify it." + +ac_pwd='$ac_pwd' +srcdir='$srcdir' +INSTALL='$INSTALL' +MKDIR_P='$MKDIR_P' +AWK='$AWK' +test -n "\$AWK" || AWK=awk +_ACEOF + +cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1 +# The default lists apply if the user does not specify any file. +ac_need_defaults=: +while test $# != 0 +do + case $1 in + --*=?*) + ac_option=`expr "X$1" : 'X\([^=]*\)='` + ac_optarg=`expr "X$1" : 'X[^=]*=\(.*\)'` + ac_shift=: + ;; + --*=) + ac_option=`expr "X$1" : 'X\([^=]*\)='` + ac_optarg= + ac_shift=: + ;; + *) + ac_option=$1 + ac_optarg=$2 + ac_shift=shift + ;; + esac + + case $ac_option in + # Handling of the options. + -recheck | --recheck | --rechec | --reche | --rech | --rec | --re | --r) + ac_cs_recheck=: ;; + --version | --versio | --versi | --vers | --ver | --ve | --v | -V ) + $as_echo "$ac_cs_version"; exit ;; + --config | --confi | --conf | --con | --co | --c ) + $as_echo "$ac_cs_config"; exit ;; + --debug | --debu | --deb | --de | --d | -d ) + debug=: ;; + --file | --fil | --fi | --f ) + $ac_shift + case $ac_optarg in + *\'*) ac_optarg=`$as_echo "$ac_optarg" | sed "s/'/'\\\\\\\\''/g"` ;; + '') as_fn_error $? "missing file argument" ;; + esac + as_fn_append CONFIG_FILES " '$ac_optarg'" + ac_need_defaults=false;; + --header | --heade | --head | --hea ) + $ac_shift + case $ac_optarg in + *\'*) ac_optarg=`$as_echo "$ac_optarg" | sed "s/'/'\\\\\\\\''/g"` ;; + esac + as_fn_append CONFIG_HEADERS " '$ac_optarg'" + ac_need_defaults=false;; + --he | --h) + # Conflict between --help and --header + as_fn_error $? "ambiguous option: \`$1' +Try \`$0 --help' for more information.";; + --help | --hel | -h ) + $as_echo "$ac_cs_usage"; exit ;; + -q | -quiet | --quiet | --quie | --qui | --qu | --q \ + | -silent | --silent | --silen | --sile | --sil | --si | --s) + ac_cs_silent=: ;; + + # This is an error. + -*) as_fn_error $? "unrecognized option: \`$1' +Try \`$0 --help' for more information." ;; + + *) as_fn_append ac_config_targets " $1" + ac_need_defaults=false ;; + + esac + shift +done + +ac_configure_extra_args= + +if $ac_cs_silent; then + exec 6>/dev/null + ac_configure_extra_args="$ac_configure_extra_args --silent" +fi + +_ACEOF +cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1 +if \$ac_cs_recheck; then + set X $SHELL '$0' $ac_configure_args \$ac_configure_extra_args --no-create --no-recursion + shift + \$as_echo "running CONFIG_SHELL=$SHELL \$*" >&6 + CONFIG_SHELL='$SHELL' + export CONFIG_SHELL + exec "\$@" +fi + +_ACEOF +cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1 +exec 5>>config.log +{ + echo + sed 'h;s/./-/g;s/^.../@%:@@%:@ /;s/...$/ @%:@@%:@/;p;x;p;x' <<_ASBOX +@%:@@%:@ Running $as_me. @%:@@%:@ +_ASBOX + $as_echo "$ac_log" +} >&5 + +_ACEOF +cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1 +# +# INIT-COMMANDS +# +AMDEP_TRUE="$AMDEP_TRUE" ac_aux_dir="$ac_aux_dir" + +_ACEOF + +cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1 + +# Handling of arguments. +for ac_config_target in $ac_config_targets +do + case $ac_config_target in + "config.h") CONFIG_HEADERS="$CONFIG_HEADERS config.h" ;; + "depfiles") CONFIG_COMMANDS="$CONFIG_COMMANDS depfiles" ;; + "Makefile") CONFIG_FILES="$CONFIG_FILES Makefile" ;; + + *) as_fn_error $? "invalid argument: \`$ac_config_target'" "$LINENO" 5;; + esac +done + + +# If the user did not use the arguments to specify the items to instantiate, +# then the envvar interface is used. Set only those that are not. +# We use the long form for the default assignment because of an extremely +# bizarre bug on SunOS 4.1.3. +if $ac_need_defaults; then + test "${CONFIG_FILES+set}" = set || CONFIG_FILES=$config_files + test "${CONFIG_HEADERS+set}" = set || CONFIG_HEADERS=$config_headers + test "${CONFIG_COMMANDS+set}" = set || CONFIG_COMMANDS=$config_commands +fi + +# Have a temporary directory for convenience. Make it in the build tree +# simply because there is no reason against having it here, and in addition, +# creating and moving files from /tmp can sometimes cause problems. +# Hook for its removal unless debugging. +# Note that there is a small window in which the directory will not be cleaned: +# after its creation but before its name has been assigned to `$tmp'. +$debug || +{ + tmp= ac_tmp= + trap 'exit_status=$? + : "${ac_tmp:=$tmp}" + { test ! -d "$ac_tmp" || rm -fr "$ac_tmp"; } && exit $exit_status +' 0 + trap 'as_fn_exit 1' 1 2 13 15 +} +# Create a (secure) tmp directory for tmp files. + +{ + tmp=`(umask 077 && mktemp -d "./confXXXXXX") 2>/dev/null` && + test -d "$tmp" +} || +{ + tmp=./conf$$-$RANDOM + (umask 077 && mkdir "$tmp") +} || as_fn_error $? "cannot create a temporary directory in ." "$LINENO" 5 +ac_tmp=$tmp + +# Set up the scripts for CONFIG_FILES section. +# No need to generate them if there are no CONFIG_FILES. +# This happens for instance with `./config.status config.h'. +if test -n "$CONFIG_FILES"; then + + +ac_cr=`echo X | tr X '\015'` +# On cygwin, bash can eat \r inside `` if the user requested igncr. +# But we know of no other shell where ac_cr would be empty at this +# point, so we can use a bashism as a fallback. +if test "x$ac_cr" = x; then + eval ac_cr=\$\'\\r\' +fi +ac_cs_awk_cr=`$AWK 'BEGIN { print "a\rb" }' /dev/null` +if test "$ac_cs_awk_cr" = "a${ac_cr}b"; then + ac_cs_awk_cr='\\r' +else + ac_cs_awk_cr=$ac_cr +fi + +echo 'BEGIN {' >"$ac_tmp/subs1.awk" && +_ACEOF + + +{ + echo "cat >conf$$subs.awk <<_ACEOF" && + echo "$ac_subst_vars" | sed 's/.*/&!$&$ac_delim/' && + echo "_ACEOF" +} >conf$$subs.sh || + as_fn_error $? "could not make $CONFIG_STATUS" "$LINENO" 5 +ac_delim_num=`echo "$ac_subst_vars" | grep -c '^'` +ac_delim='%!_!# ' +for ac_last_try in false false false false false :; do + . ./conf$$subs.sh || + as_fn_error $? "could not make $CONFIG_STATUS" "$LINENO" 5 + + ac_delim_n=`sed -n "s/.*$ac_delim\$/X/p" conf$$subs.awk | grep -c X` + if test $ac_delim_n = $ac_delim_num; then + break + elif $ac_last_try; then + as_fn_error $? "could not make $CONFIG_STATUS" "$LINENO" 5 + else + ac_delim="$ac_delim!$ac_delim _$ac_delim!! " + fi +done +rm -f conf$$subs.sh + +cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1 +cat >>"\$ac_tmp/subs1.awk" <<\\_ACAWK && +_ACEOF +sed -n ' +h +s/^/S["/; s/!.*/"]=/ +p +g +s/^[^!]*!// +:repl +t repl +s/'"$ac_delim"'$// +t delim +:nl +h +s/\(.\{148\}\)..*/\1/ +t more1 +s/["\\]/\\&/g; s/^/"/; s/$/\\n"\\/ +p +n +b repl +:more1 +s/["\\]/\\&/g; s/^/"/; s/$/"\\/ +p +g +s/.\{148\}// +t nl +:delim +h +s/\(.\{148\}\)..*/\1/ +t more2 +s/["\\]/\\&/g; s/^/"/; s/$/"/ +p +b +:more2 +s/["\\]/\\&/g; s/^/"/; s/$/"\\/ +p +g +s/.\{148\}// +t delim +' >$CONFIG_STATUS || ac_write_fail=1 +rm -f conf$$subs.awk +cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1 +_ACAWK +cat >>"\$ac_tmp/subs1.awk" <<_ACAWK && + for (key in S) S_is_set[key] = 1 + FS = "" + +} +{ + line = $ 0 + nfields = split(line, field, "@") + substed = 0 + len = length(field[1]) + for (i = 2; i < nfields; i++) { + key = field[i] + keylen = length(key) + if (S_is_set[key]) { + value = S[key] + line = substr(line, 1, len) "" value "" substr(line, len + keylen + 3) + len += length(value) + length(field[++i]) + substed = 1 + } else + len += 1 + keylen + } + + print line +} + +_ACAWK +_ACEOF +cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1 +if sed "s/$ac_cr//" < /dev/null > /dev/null 2>&1; then + sed "s/$ac_cr\$//; s/$ac_cr/$ac_cs_awk_cr/g" +else + cat +fi < "$ac_tmp/subs1.awk" > "$ac_tmp/subs.awk" \ + || as_fn_error $? "could not setup config files machinery" "$LINENO" 5 +_ACEOF + +# VPATH may cause trouble with some makes, so we remove sole $(srcdir), +# ${srcdir} and @srcdir@ entries from VPATH if srcdir is ".", strip leading and +# trailing colons and then remove the whole line if VPATH becomes empty +# (actually we leave an empty line to preserve line numbers). +if test "x$srcdir" = x.; then + ac_vpsub='/^[ ]*VPATH[ ]*=[ ]*/{ +h +s/// +s/^/:/ +s/[ ]*$/:/ +s/:\$(srcdir):/:/g +s/:\${srcdir}:/:/g +s/:@srcdir@:/:/g +s/^:*// +s/:*$// +x +s/\(=[ ]*\).*/\1/ +G +s/\n// +s/^[^=]*=[ ]*$// +}' +fi + +cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1 +fi # test -n "$CONFIG_FILES" + +# Set up the scripts for CONFIG_HEADERS section. +# No need to generate them if there are no CONFIG_HEADERS. +# This happens for instance with `./config.status Makefile'. +if test -n "$CONFIG_HEADERS"; then +cat >"$ac_tmp/defines.awk" <<\_ACAWK || +BEGIN { +_ACEOF + +# Transform confdefs.h into an awk script `defines.awk', embedded as +# here-document in config.status, that substitutes the proper values into +# config.h.in to produce config.h. + +# Create a delimiter string that does not exist in confdefs.h, to ease +# handling of long lines. +ac_delim='%!_!# ' +for ac_last_try in false false :; do + ac_tt=`sed -n "/$ac_delim/p" confdefs.h` + if test -z "$ac_tt"; then + break + elif $ac_last_try; then + as_fn_error $? "could not make $CONFIG_HEADERS" "$LINENO" 5 + else + ac_delim="$ac_delim!$ac_delim _$ac_delim!! " + fi +done + +# For the awk script, D is an array of macro values keyed by name, +# likewise P contains macro parameters if any. Preserve backslash +# newline sequences. + +ac_word_re=[_$as_cr_Letters][_$as_cr_alnum]* +sed -n ' +s/.\{148\}/&'"$ac_delim"'/g +t rset +:rset +s/^[ ]*#[ ]*define[ ][ ]*/ / +t def +d +:def +s/\\$// +t bsnl +s/["\\]/\\&/g +s/^ \('"$ac_word_re"'\)\(([^()]*)\)[ ]*\(.*\)/P["\1"]="\2"\ +D["\1"]=" \3"/p +s/^ \('"$ac_word_re"'\)[ ]*\(.*\)/D["\1"]=" \2"/p +d +:bsnl +s/["\\]/\\&/g +s/^ \('"$ac_word_re"'\)\(([^()]*)\)[ ]*\(.*\)/P["\1"]="\2"\ +D["\1"]=" \3\\\\\\n"\\/p +t cont +s/^ \('"$ac_word_re"'\)[ ]*\(.*\)/D["\1"]=" \2\\\\\\n"\\/p +t cont +d +:cont +n +s/.\{148\}/&'"$ac_delim"'/g +t clear +:clear +s/\\$// +t bsnlc +s/["\\]/\\&/g; s/^/"/; s/$/"/p +d +:bsnlc +s/["\\]/\\&/g; s/^/"/; s/$/\\\\\\n"\\/p +b cont +' >$CONFIG_STATUS || ac_write_fail=1 + +cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1 + for (key in D) D_is_set[key] = 1 + FS = "" +} +/^[\t ]*#[\t ]*(define|undef)[\t ]+$ac_word_re([\t (]|\$)/ { + line = \$ 0 + split(line, arg, " ") + if (arg[1] == "#") { + defundef = arg[2] + mac1 = arg[3] + } else { + defundef = substr(arg[1], 2) + mac1 = arg[2] + } + split(mac1, mac2, "(") #) + macro = mac2[1] + prefix = substr(line, 1, index(line, defundef) - 1) + if (D_is_set[macro]) { + # Preserve the white space surrounding the "#". + print prefix "define", macro P[macro] D[macro] + next + } else { + # Replace #undef with comments. This is necessary, for example, + # in the case of _POSIX_SOURCE, which is predefined and required + # on some systems where configure will not decide to define it. + if (defundef == "undef") { + print "/*", prefix defundef, macro, "*/" + next + } + } +} +{ print } +_ACAWK +_ACEOF +cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1 + as_fn_error $? "could not setup config headers machinery" "$LINENO" 5 +fi # test -n "$CONFIG_HEADERS" + + +eval set X " :F $CONFIG_FILES :H $CONFIG_HEADERS :C $CONFIG_COMMANDS" +shift +for ac_tag +do + case $ac_tag in + :[FHLC]) ac_mode=$ac_tag; continue;; + esac + case $ac_mode$ac_tag in + :[FHL]*:*);; + :L* | :C*:*) as_fn_error $? "invalid tag \`$ac_tag'" "$LINENO" 5;; + :[FH]-) ac_tag=-:-;; + :[FH]*) ac_tag=$ac_tag:$ac_tag.in;; + esac + ac_save_IFS=$IFS + IFS=: + set x $ac_tag + IFS=$ac_save_IFS + shift + ac_file=$1 + shift + + case $ac_mode in + :L) ac_source=$1;; + :[FH]) + ac_file_inputs= + for ac_f + do + case $ac_f in + -) ac_f="$ac_tmp/stdin";; + *) # Look for the file first in the build tree, then in the source tree + # (if the path is not absolute). The absolute path cannot be DOS-style, + # because $ac_f cannot contain `:'. + test -f "$ac_f" || + case $ac_f in + [\\/$]*) false;; + *) test -f "$srcdir/$ac_f" && ac_f="$srcdir/$ac_f";; + esac || + as_fn_error 1 "cannot find input file: \`$ac_f'" "$LINENO" 5;; + esac + case $ac_f in *\'*) ac_f=`$as_echo "$ac_f" | sed "s/'/'\\\\\\\\''/g"`;; esac + as_fn_append ac_file_inputs " '$ac_f'" + done + + # Let's still pretend it is `configure' which instantiates (i.e., don't + # use $as_me), people would be surprised to read: + # /* config.h. Generated by config.status. */ + configure_input='Generated from '` + $as_echo "$*" | sed 's|^[^:]*/||;s|:[^:]*/|, |g' + `' by configure.' + if test x"$ac_file" != x-; then + configure_input="$ac_file. $configure_input" + { $as_echo "$as_me:${as_lineno-$LINENO}: creating $ac_file" >&5 +$as_echo "$as_me: creating $ac_file" >&6;} + fi + # Neutralize special characters interpreted by sed in replacement strings. + case $configure_input in #( + *\&* | *\|* | *\\* ) + ac_sed_conf_input=`$as_echo "$configure_input" | + sed 's/[\\\\&|]/\\\\&/g'`;; #( + *) ac_sed_conf_input=$configure_input;; + esac + + case $ac_tag in + *:-:* | *:-) cat >"$ac_tmp/stdin" \ + || as_fn_error $? "could not create $ac_file" "$LINENO" 5 ;; + esac + ;; + esac + + ac_dir=`$as_dirname -- "$ac_file" || +$as_expr X"$ac_file" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \ + X"$ac_file" : 'X\(//\)[^/]' \| \ + X"$ac_file" : 'X\(//\)$' \| \ + X"$ac_file" : 'X\(/\)' \| . 2>/dev/null || +$as_echo X"$ac_file" | + sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ + s//\1/ + q + } + /^X\(\/\/\)[^/].*/{ + s//\1/ + q + } + /^X\(\/\/\)$/{ + s//\1/ + q + } + /^X\(\/\).*/{ + s//\1/ + q + } + s/.*/./; q'` + as_dir="$ac_dir"; as_fn_mkdir_p + ac_builddir=. + +case "$ac_dir" in +.) ac_dir_suffix= ac_top_builddir_sub=. ac_top_build_prefix= ;; +*) + ac_dir_suffix=/`$as_echo "$ac_dir" | sed 's|^\.[\\/]||'` + # A ".." for each directory in $ac_dir_suffix. + ac_top_builddir_sub=`$as_echo "$ac_dir_suffix" | sed 's|/[^\\/]*|/..|g;s|/||'` + case $ac_top_builddir_sub in + "") ac_top_builddir_sub=. ac_top_build_prefix= ;; + *) ac_top_build_prefix=$ac_top_builddir_sub/ ;; + esac ;; +esac +ac_abs_top_builddir=$ac_pwd +ac_abs_builddir=$ac_pwd$ac_dir_suffix +# for backward compatibility: +ac_top_builddir=$ac_top_build_prefix + +case $srcdir in + .) # We are building in place. + ac_srcdir=. + ac_top_srcdir=$ac_top_builddir_sub + ac_abs_top_srcdir=$ac_pwd ;; + [\\/]* | ?:[\\/]* ) # Absolute name. + ac_srcdir=$srcdir$ac_dir_suffix; + ac_top_srcdir=$srcdir + ac_abs_top_srcdir=$srcdir ;; + *) # Relative name. + ac_srcdir=$ac_top_build_prefix$srcdir$ac_dir_suffix + ac_top_srcdir=$ac_top_build_prefix$srcdir + ac_abs_top_srcdir=$ac_pwd/$srcdir ;; +esac +ac_abs_srcdir=$ac_abs_top_srcdir$ac_dir_suffix + + + case $ac_mode in + :F) + # + # CONFIG_FILE + # + + case $INSTALL in + [\\/$]* | ?:[\\/]* ) ac_INSTALL=$INSTALL ;; + *) ac_INSTALL=$ac_top_build_prefix$INSTALL ;; + esac + ac_MKDIR_P=$MKDIR_P + case $MKDIR_P in + [\\/$]* | ?:[\\/]* ) ;; + */*) ac_MKDIR_P=$ac_top_build_prefix$MKDIR_P ;; + esac +_ACEOF + +cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1 +# If the template does not know about datarootdir, expand it. +# FIXME: This hack should be removed a few years after 2.60. +ac_datarootdir_hack=; ac_datarootdir_seen= +ac_sed_dataroot=' +/datarootdir/ { + p + q +} +/@datadir@/p +/@docdir@/p +/@infodir@/p +/@localedir@/p +/@mandir@/p' +case `eval "sed -n \"\$ac_sed_dataroot\" $ac_file_inputs"` in +*datarootdir*) ac_datarootdir_seen=yes;; +*@datadir@*|*@docdir@*|*@infodir@*|*@localedir@*|*@mandir@*) + { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: $ac_file_inputs seems to ignore the --datarootdir setting" >&5 +$as_echo "$as_me: WARNING: $ac_file_inputs seems to ignore the --datarootdir setting" >&2;} +_ACEOF +cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1 + ac_datarootdir_hack=' + s&@datadir@&$datadir&g + s&@docdir@&$docdir&g + s&@infodir@&$infodir&g + s&@localedir@&$localedir&g + s&@mandir@&$mandir&g + s&\\\${datarootdir}&$datarootdir&g' ;; +esac +_ACEOF + +# Neutralize VPATH when `$srcdir' = `.'. +# Shell code in configure.ac might set extrasub. +# FIXME: do we really want to maintain this feature? +cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1 +ac_sed_extra="$ac_vpsub +$extrasub +_ACEOF +cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1 +:t +/@[a-zA-Z_][a-zA-Z_0-9]*@/!b +s|@configure_input@|$ac_sed_conf_input|;t t +s&@top_builddir@&$ac_top_builddir_sub&;t t +s&@top_build_prefix@&$ac_top_build_prefix&;t t +s&@srcdir@&$ac_srcdir&;t t +s&@abs_srcdir@&$ac_abs_srcdir&;t t +s&@top_srcdir@&$ac_top_srcdir&;t t +s&@abs_top_srcdir@&$ac_abs_top_srcdir&;t t +s&@builddir@&$ac_builddir&;t t +s&@abs_builddir@&$ac_abs_builddir&;t t +s&@abs_top_builddir@&$ac_abs_top_builddir&;t t +s&@INSTALL@&$ac_INSTALL&;t t +s&@MKDIR_P@&$ac_MKDIR_P&;t t +$ac_datarootdir_hack +" +eval sed \"\$ac_sed_extra\" "$ac_file_inputs" | $AWK -f "$ac_tmp/subs.awk" \ + >$ac_tmp/out || as_fn_error $? "could not create $ac_file" "$LINENO" 5 + +test -z "$ac_datarootdir_hack$ac_datarootdir_seen" && + { ac_out=`sed -n '/\${datarootdir}/p' "$ac_tmp/out"`; test -n "$ac_out"; } && + { ac_out=`sed -n '/^[ ]*datarootdir[ ]*:*=/p' \ + "$ac_tmp/out"`; test -z "$ac_out"; } && + { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: $ac_file contains a reference to the variable \`datarootdir' +which seems to be undefined. Please make sure it is defined" >&5 +$as_echo "$as_me: WARNING: $ac_file contains a reference to the variable \`datarootdir' +which seems to be undefined. Please make sure it is defined" >&2;} + + rm -f "$ac_tmp/stdin" + case $ac_file in + -) cat "$ac_tmp/out" && rm -f "$ac_tmp/out";; + *) rm -f "$ac_file" && mv "$ac_tmp/out" "$ac_file";; + esac \ + || as_fn_error $? "could not create $ac_file" "$LINENO" 5 + ;; + :H) + # + # CONFIG_HEADER + # + if test x"$ac_file" != x-; then + { + $as_echo "/* $configure_input */" \ + && eval '$AWK -f "$ac_tmp/defines.awk"' "$ac_file_inputs" + } >"$ac_tmp/config.h" \ + || as_fn_error $? "could not create $ac_file" "$LINENO" 5 + if diff "$ac_file" "$ac_tmp/config.h" >/dev/null 2>&1; then + { $as_echo "$as_me:${as_lineno-$LINENO}: $ac_file is unchanged" >&5 +$as_echo "$as_me: $ac_file is unchanged" >&6;} + else + rm -f "$ac_file" + mv "$ac_tmp/config.h" "$ac_file" \ + || as_fn_error $? "could not create $ac_file" "$LINENO" 5 + fi + else + $as_echo "/* $configure_input */" \ + && eval '$AWK -f "$ac_tmp/defines.awk"' "$ac_file_inputs" \ + || as_fn_error $? "could not create -" "$LINENO" 5 + fi +# Compute "$ac_file"'s index in $config_headers. +_am_arg="$ac_file" +_am_stamp_count=1 +for _am_header in $config_headers :; do + case $_am_header in + $_am_arg | $_am_arg:* ) + break ;; + * ) + _am_stamp_count=`expr $_am_stamp_count + 1` ;; + esac +done +echo "timestamp for $_am_arg" >`$as_dirname -- "$_am_arg" || +$as_expr X"$_am_arg" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \ + X"$_am_arg" : 'X\(//\)[^/]' \| \ + X"$_am_arg" : 'X\(//\)$' \| \ + X"$_am_arg" : 'X\(/\)' \| . 2>/dev/null || +$as_echo X"$_am_arg" | + sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ + s//\1/ + q + } + /^X\(\/\/\)[^/].*/{ + s//\1/ + q + } + /^X\(\/\/\)$/{ + s//\1/ + q + } + /^X\(\/\).*/{ + s//\1/ + q + } + s/.*/./; q'`/stamp-h$_am_stamp_count + ;; + + :C) { $as_echo "$as_me:${as_lineno-$LINENO}: executing $ac_file commands" >&5 +$as_echo "$as_me: executing $ac_file commands" >&6;} + ;; + esac + + + case $ac_file$ac_mode in + "depfiles":C) test x"$AMDEP_TRUE" != x"" || { + # Older Autoconf quotes --file arguments for eval, but not when files + # are listed without --file. Let's play safe and only enable the eval + # if we detect the quoting. + case $CONFIG_FILES in + *\'*) eval set x "$CONFIG_FILES" ;; + *) set x $CONFIG_FILES ;; + esac + shift + for mf + do + # Strip MF so we end up with the name of the file. + mf=`echo "$mf" | sed -e 's/:.*$//'` + # Check whether this is an Automake generated Makefile or not. + # We used to match only the files named 'Makefile.in', but + # some people rename them; so instead we look at the file content. + # Grep'ing the first line is not enough: some people post-process + # each Makefile.in and add a new line on top of each file to say so. + # Grep'ing the whole file is not good either: AIX grep has a line + # limit of 2048, but all sed's we know have understand at least 4000. + if sed -n 's,^#.*generated by automake.*,X,p' "$mf" | grep X >/dev/null 2>&1; then + dirpart=`$as_dirname -- "$mf" || +$as_expr X"$mf" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \ + X"$mf" : 'X\(//\)[^/]' \| \ + X"$mf" : 'X\(//\)$' \| \ + X"$mf" : 'X\(/\)' \| . 2>/dev/null || +$as_echo X"$mf" | + sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ + s//\1/ + q + } + /^X\(\/\/\)[^/].*/{ + s//\1/ + q + } + /^X\(\/\/\)$/{ + s//\1/ + q + } + /^X\(\/\).*/{ + s//\1/ + q + } + s/.*/./; q'` + else + continue + fi + # Extract the definition of DEPDIR, am__include, and am__quote + # from the Makefile without running 'make'. + DEPDIR=`sed -n 's/^DEPDIR = //p' < "$mf"` + test -z "$DEPDIR" && continue + am__include=`sed -n 's/^am__include = //p' < "$mf"` + test -z "$am__include" && continue + am__quote=`sed -n 's/^am__quote = //p' < "$mf"` + # Find all dependency output files, they are included files with + # $(DEPDIR) in their names. We invoke sed twice because it is the + # simplest approach to changing $(DEPDIR) to its actual value in the + # expansion. + for file in `sed -n " + s/^$am__include $am__quote\(.*(DEPDIR).*\)$am__quote"'$/\1/p' <"$mf" | \ + sed -e 's/\$(DEPDIR)/'"$DEPDIR"'/g'`; do + # Make sure the directory exists. + test -f "$dirpart/$file" && continue + fdir=`$as_dirname -- "$file" || +$as_expr X"$file" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \ + X"$file" : 'X\(//\)[^/]' \| \ + X"$file" : 'X\(//\)$' \| \ + X"$file" : 'X\(/\)' \| . 2>/dev/null || +$as_echo X"$file" | + sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ + s//\1/ + q + } + /^X\(\/\/\)[^/].*/{ + s//\1/ + q + } + /^X\(\/\/\)$/{ + s//\1/ + q + } + /^X\(\/\).*/{ + s//\1/ + q + } + s/.*/./; q'` + as_dir=$dirpart/$fdir; as_fn_mkdir_p + # echo "creating $dirpart/$file" + echo '# dummy' > "$dirpart/$file" + done + done +} + ;; + + esac +done # for ac_tag + + +as_fn_exit 0 +_ACEOF +ac_clean_files=$ac_clean_files_save + +test $ac_write_fail = 0 || + as_fn_error $? "write failure creating $CONFIG_STATUS" "$LINENO" 5 + + +# configure is writing to config.log, and then calls config.status. +# config.status does its own redirection, appending to config.log. +# Unfortunately, on DOS this fails, as config.log is still kept open +# by configure, so config.status won't be able to write to it; its +# output is simply discarded. So we exec the FD to /dev/null, +# effectively closing config.log, so it can be properly (re)opened and +# appended to by config.status. When coming back to configure, we +# need to make the FD available again. +if test "$no_create" != yes; then + ac_cs_success=: + ac_config_status_args= + test "$silent" = yes && + ac_config_status_args="$ac_config_status_args --quiet" + exec 5>/dev/null + $SHELL $CONFIG_STATUS $ac_config_status_args || ac_cs_success=false + exec 5>>config.log + # Use ||, not &&, to avoid exiting from the if with $? = 1, which + # would make configure fail if this is the last instruction. + $ac_cs_success || as_fn_exit 1 +fi +if test -n "$ac_unrecognized_opts" && test "$enable_option_checking" != no; then + { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: unrecognized options: $ac_unrecognized_opts" >&5 +$as_echo "$as_me: WARNING: unrecognized options: $ac_unrecognized_opts" >&2;} +fi + diff --git a/examples/yocto/meta-mini/recipes-hello/autohello/files/autohello/autom4te.cache/requests b/examples/yocto/meta-mini/recipes-hello/autohello/files/autohello/autom4te.cache/requests new file mode 100644 index 0000000..a724ae0 --- /dev/null +++ b/examples/yocto/meta-mini/recipes-hello/autohello/files/autohello/autom4te.cache/requests @@ -0,0 +1,154 @@ +# This file was generated by Autom4te Sun Jun 29 17:42:32 UTC 2014. +# It contains the lists of macros which have been traced. +# It can be safely removed. + +@request = ( + bless( [ + '0', + 1, + [ + '/usr/share/autoconf' + ], + [ + '/usr/share/autoconf/autoconf/autoconf.m4f', + '-', + '/usr/share/aclocal-1.14/internal/ac-config-macro-dirs.m4', + '/usr/share/aclocal-1.14/amversion.m4', + '/usr/share/aclocal-1.14/auxdir.m4', + '/usr/share/aclocal-1.14/cond.m4', + '/usr/share/aclocal-1.14/depend.m4', + '/usr/share/aclocal-1.14/depout.m4', + '/usr/share/aclocal-1.14/init.m4', + '/usr/share/aclocal-1.14/install-sh.m4', + '/usr/share/aclocal-1.14/lead-dot.m4', + '/usr/share/aclocal-1.14/make.m4', + '/usr/share/aclocal-1.14/missing.m4', + '/usr/share/aclocal-1.14/options.m4', + '/usr/share/aclocal-1.14/prog-cc-c-o.m4', + '/usr/share/aclocal-1.14/runlog.m4', + '/usr/share/aclocal-1.14/sanity.m4', + '/usr/share/aclocal-1.14/silent.m4', + '/usr/share/aclocal-1.14/strip.m4', + '/usr/share/aclocal-1.14/substnot.m4', + '/usr/share/aclocal-1.14/tar.m4', + 'configure.ac' + ], + { + 'AC_DEFUN' => 1, + 'AC_CONFIG_MACRO_DIR_TRACE' => 1, + 'AM_DEP_TRACK' => 1, + 'AM_RUN_LOG' => 1, + '_AM_SUBST_NOTMAKE' => 1, + 'AM_SILENT_RULES' => 1, + 'AM_INIT_AUTOMAKE' => 1, + '_AM_IF_OPTION' => 1, + 'AM_AUTOMAKE_VERSION' => 1, + 'AM_PROG_INSTALL_SH' => 1, + 'AM_MAKE_INCLUDE' => 1, + 'AM_CONDITIONAL' => 1, + 'AM_SUBST_NOTMAKE' => 1, + 'AU_DEFUN' => 1, + 'AC_DEFUN_ONCE' => 1, + 'AC_CONFIG_MACRO_DIR' => 1, + 'include' => 1, + '_AM_AUTOCONF_VERSION' => 1, + 'AM_PROG_CC_C_O' => 1, + 'm4_pattern_forbid' => 1, + 'AM_SET_DEPDIR' => 1, + '_AM_OUTPUT_DEPENDENCY_COMMANDS' => 1, + '_m4_warn' => 1, + 'm4_pattern_allow' => 1, + 'AM_MISSING_PROG' => 1, + 'AM_SET_LEADING_DOT' => 1, + 'AM_SANITY_CHECK' => 1, + 'AM_PROG_INSTALL_STRIP' => 1, + 'AM_OUTPUT_DEPENDENCY_COMMANDS' => 1, + '_AM_CONFIG_MACRO_DIRS' => 1, + 'm4_include' => 1, + '_AC_AM_CONFIG_HEADER_HOOK' => 1, + '_AM_PROG_TAR' => 1, + '_AM_SET_OPTIONS' => 1, + '_AM_DEPENDENCIES' => 1, + '_AM_MANGLE_OPTION' => 1, + 'AM_SET_CURRENT_AUTOMAKE_VERSION' => 1, + '_AM_PROG_CC_C_O' => 1, + 'AM_AUX_DIR_EXPAND' => 1, + 'AM_MISSING_HAS_RUN' => 1, + '_AM_SET_OPTION' => 1 + } + ], 'Autom4te::Request' ), + bless( [ + '1', + 1, + [ + '/usr/share/autoconf' + ], + [ + '/usr/share/autoconf/autoconf/autoconf.m4f', + 'aclocal.m4', + 'configure.ac' + ], + { + 'AM_SILENT_RULES' => 1, + 'sinclude' => 1, + 'AM_INIT_AUTOMAKE' => 1, + 'AM_EXTRA_RECURSIVE_TARGETS' => 1, + 'AM_AUTOMAKE_VERSION' => 1, + 'AM_CONDITIONAL' => 1, + 'AC_CONFIG_SUBDIRS' => 1, + 'AC_CANONICAL_HOST' => 1, + 'AC_CONFIG_LIBOBJ_DIR' => 1, + 'AM_PATH_GUILE' => 1, + 'LT_SUPPORTED_TAG' => 1, + 'AC_FC_FREEFORM' => 1, + '_LT_AC_TAGCONFIG' => 1, + '_AM_SUBST_NOTMAKE' => 1, + 'include' => 1, + 'm4_sinclude' => 1, + 'AM_PROG_CXX_C_O' => 1, + 'AM_XGETTEXT_OPTION' => 1, + 'AM_PROG_CC_C_O' => 1, + 'AC_CANONICAL_BUILD' => 1, + 'AM_PROG_FC_C_O' => 1, + 'm4_pattern_forbid' => 1, + 'AC_DEFINE_TRACE_LITERAL' => 1, + '_AM_COND_ELSE' => 1, + 'AH_OUTPUT' => 1, + 'AC_LIBSOURCE' => 1, + 'AM_MAKEFILE_INCLUDE' => 1, + 'AC_CONFIG_HEADERS' => 1, + 'AM_NLS' => 1, + 'AC_CANONICAL_SYSTEM' => 1, + 'AM_MAINTAINER_MODE' => 1, + 'AM_PROG_MOC' => 1, + 'AM_POT_TOOLS' => 1, + 'm4_pattern_allow' => 1, + 'AC_FC_PP_SRCEXT' => 1, + 'LT_INIT' => 1, + 'AC_CONFIG_LINKS' => 1, + 'AC_FC_PP_DEFINE' => 1, + 'AC_REQUIRE_AUX_FILE' => 1, + '_AM_COND_IF' => 1, + 'AC_CANONICAL_TARGET' => 1, + '_m4_warn' => 1, + 'AC_SUBST_TRACE' => 1, + 'AM_PROG_MKDIR_P' => 1, + 'AM_PROG_AR' => 1, + 'AM_ENABLE_MULTILIB' => 1, + '_AM_COND_ENDIF' => 1, + 'AC_CONFIG_AUX_DIR' => 1, + 'AM_GNU_GETTEXT' => 1, + '_AM_MAKEFILE_INCLUDE' => 1, + 'AC_FC_SRCEXT' => 1, + 'AM_PROG_F77_C_O' => 1, + 'AC_SUBST' => 1, + 'AC_INIT' => 1, + 'AC_CONFIG_FILES' => 1, + 'm4_include' => 1, + 'LT_CONFIG_LTDL_DIR' => 1, + 'AM_GNU_GETTEXT_INTL_SUBDIR' => 1, + 'AC_PROG_LIBTOOL' => 1 + } + ], 'Autom4te::Request' ) + ); + diff --git a/examples/yocto/meta-mini/recipes-hello/autohello/files/autohello/autom4te.cache/traces.0 b/examples/yocto/meta-mini/recipes-hello/autohello/files/autohello/autom4te.cache/traces.0 new file mode 100644 index 0000000..8621358 --- /dev/null +++ b/examples/yocto/meta-mini/recipes-hello/autohello/files/autohello/autom4te.cache/traces.0 @@ -0,0 +1,932 @@ +m4trace:/usr/share/aclocal-1.14/amversion.m4:14: -1- AC_DEFUN([AM_AUTOMAKE_VERSION], [am__api_version='1.14' +dnl Some users find AM_AUTOMAKE_VERSION and mistake it for a way to +dnl require some minimum version. Point them to the right macro. +m4_if([$1], [1.14.1], [], + [AC_FATAL([Do not call $0, use AM_INIT_AUTOMAKE([$1]).])])dnl +]) +m4trace:/usr/share/aclocal-1.14/amversion.m4:33: -1- AC_DEFUN([AM_SET_CURRENT_AUTOMAKE_VERSION], [AM_AUTOMAKE_VERSION([1.14.1])dnl +m4_ifndef([AC_AUTOCONF_VERSION], + [m4_copy([m4_PACKAGE_VERSION], [AC_AUTOCONF_VERSION])])dnl +_AM_AUTOCONF_VERSION(m4_defn([AC_AUTOCONF_VERSION]))]) +m4trace:/usr/share/aclocal-1.14/auxdir.m4:47: -1- AC_DEFUN([AM_AUX_DIR_EXPAND], [dnl Rely on autoconf to set up CDPATH properly. +AC_PREREQ([2.50])dnl +# expand $ac_aux_dir to an absolute path +am_aux_dir=`cd $ac_aux_dir && pwd` +]) +m4trace:/usr/share/aclocal-1.14/cond.m4:12: -1- AC_DEFUN([AM_CONDITIONAL], [AC_PREREQ([2.52])dnl + m4_if([$1], [TRUE], [AC_FATAL([$0: invalid condition: $1])], + [$1], [FALSE], [AC_FATAL([$0: invalid condition: $1])])dnl +AC_SUBST([$1_TRUE])dnl +AC_SUBST([$1_FALSE])dnl +_AM_SUBST_NOTMAKE([$1_TRUE])dnl +_AM_SUBST_NOTMAKE([$1_FALSE])dnl +m4_define([_AM_COND_VALUE_$1], [$2])dnl +if $2; then + $1_TRUE= + $1_FALSE='#' +else + $1_TRUE='#' + $1_FALSE= +fi +AC_CONFIG_COMMANDS_PRE( +[if test -z "${$1_TRUE}" && test -z "${$1_FALSE}"; then + AC_MSG_ERROR([[conditional "$1" was never defined. +Usually this means the macro was only invoked conditionally.]]) +fi])]) +m4trace:/usr/share/aclocal-1.14/depend.m4:26: -1- AC_DEFUN([_AM_DEPENDENCIES], [AC_REQUIRE([AM_SET_DEPDIR])dnl +AC_REQUIRE([AM_OUTPUT_DEPENDENCY_COMMANDS])dnl +AC_REQUIRE([AM_MAKE_INCLUDE])dnl +AC_REQUIRE([AM_DEP_TRACK])dnl + +m4_if([$1], [CC], [depcc="$CC" am_compiler_list=], + [$1], [CXX], [depcc="$CXX" am_compiler_list=], + [$1], [OBJC], [depcc="$OBJC" am_compiler_list='gcc3 gcc'], + [$1], [OBJCXX], [depcc="$OBJCXX" am_compiler_list='gcc3 gcc'], + [$1], [UPC], [depcc="$UPC" am_compiler_list=], + [$1], [GCJ], [depcc="$GCJ" am_compiler_list='gcc3 gcc'], + [depcc="$$1" am_compiler_list=]) + +AC_CACHE_CHECK([dependency style of $depcc], + [am_cv_$1_dependencies_compiler_type], +[if test -z "$AMDEP_TRUE" && test -f "$am_depcomp"; then + # We make a subdir and do the tests there. Otherwise we can end up + # making bogus files that we don't know about and never remove. For + # instance it was reported that on HP-UX the gcc test will end up + # making a dummy file named 'D' -- because '-MD' means "put the output + # in D". + rm -rf conftest.dir + mkdir conftest.dir + # Copy depcomp to subdir because otherwise we won't find it if we're + # using a relative directory. + cp "$am_depcomp" conftest.dir + cd conftest.dir + # We will build objects and dependencies in a subdirectory because + # it helps to detect inapplicable dependency modes. For instance + # both Tru64's cc and ICC support -MD to output dependencies as a + # side effect of compilation, but ICC will put the dependencies in + # the current directory while Tru64 will put them in the object + # directory. + mkdir sub + + am_cv_$1_dependencies_compiler_type=none + if test "$am_compiler_list" = ""; then + am_compiler_list=`sed -n ['s/^#*\([a-zA-Z0-9]*\))$/\1/p'] < ./depcomp` + fi + am__universal=false + m4_case([$1], [CC], + [case " $depcc " in #( + *\ -arch\ *\ -arch\ *) am__universal=true ;; + esac], + [CXX], + [case " $depcc " in #( + *\ -arch\ *\ -arch\ *) am__universal=true ;; + esac]) + + for depmode in $am_compiler_list; do + # Setup a source with many dependencies, because some compilers + # like to wrap large dependency lists on column 80 (with \), and + # we should not choose a depcomp mode which is confused by this. + # + # We need to recreate these files for each test, as the compiler may + # overwrite some of them when testing with obscure command lines. + # This happens at least with the AIX C compiler. + : > sub/conftest.c + for i in 1 2 3 4 5 6; do + echo '#include "conftst'$i'.h"' >> sub/conftest.c + # Using ": > sub/conftst$i.h" creates only sub/conftst1.h with + # Solaris 10 /bin/sh. + echo '/* dummy */' > sub/conftst$i.h + done + echo "${am__include} ${am__quote}sub/conftest.Po${am__quote}" > confmf + + # We check with '-c' and '-o' for the sake of the "dashmstdout" + # mode. It turns out that the SunPro C++ compiler does not properly + # handle '-M -o', and we need to detect this. Also, some Intel + # versions had trouble with output in subdirs. + am__obj=sub/conftest.${OBJEXT-o} + am__minus_obj="-o $am__obj" + case $depmode in + gcc) + # This depmode causes a compiler race in universal mode. + test "$am__universal" = false || continue + ;; + nosideeffect) + # After this tag, mechanisms are not by side-effect, so they'll + # only be used when explicitly requested. + if test "x$enable_dependency_tracking" = xyes; then + continue + else + break + fi + ;; + msvc7 | msvc7msys | msvisualcpp | msvcmsys) + # This compiler won't grok '-c -o', but also, the minuso test has + # not run yet. These depmodes are late enough in the game, and + # so weak that their functioning should not be impacted. + am__obj=conftest.${OBJEXT-o} + am__minus_obj= + ;; + none) break ;; + esac + if depmode=$depmode \ + source=sub/conftest.c object=$am__obj \ + depfile=sub/conftest.Po tmpdepfile=sub/conftest.TPo \ + $SHELL ./depcomp $depcc -c $am__minus_obj sub/conftest.c \ + >/dev/null 2>conftest.err && + grep sub/conftst1.h sub/conftest.Po > /dev/null 2>&1 && + grep sub/conftst6.h sub/conftest.Po > /dev/null 2>&1 && + grep $am__obj sub/conftest.Po > /dev/null 2>&1 && + ${MAKE-make} -s -f confmf > /dev/null 2>&1; then + # icc doesn't choke on unknown options, it will just issue warnings + # or remarks (even with -Werror). So we grep stderr for any message + # that says an option was ignored or not supported. + # When given -MP, icc 7.0 and 7.1 complain thusly: + # icc: Command line warning: ignoring option '-M'; no argument required + # The diagnosis changed in icc 8.0: + # icc: Command line remark: option '-MP' not supported + if (grep 'ignoring option' conftest.err || + grep 'not supported' conftest.err) >/dev/null 2>&1; then :; else + am_cv_$1_dependencies_compiler_type=$depmode + break + fi + fi + done + + cd .. + rm -rf conftest.dir +else + am_cv_$1_dependencies_compiler_type=none +fi +]) +AC_SUBST([$1DEPMODE], [depmode=$am_cv_$1_dependencies_compiler_type]) +AM_CONDITIONAL([am__fastdep$1], [ + test "x$enable_dependency_tracking" != xno \ + && test "$am_cv_$1_dependencies_compiler_type" = gcc3]) +]) +m4trace:/usr/share/aclocal-1.14/depend.m4:163: -1- AC_DEFUN([AM_SET_DEPDIR], [AC_REQUIRE([AM_SET_LEADING_DOT])dnl +AC_SUBST([DEPDIR], ["${am__leading_dot}deps"])dnl +]) +m4trace:/usr/share/aclocal-1.14/depend.m4:171: -1- AC_DEFUN([AM_DEP_TRACK], [AC_ARG_ENABLE([dependency-tracking], [dnl +AS_HELP_STRING( + [--enable-dependency-tracking], + [do not reject slow dependency extractors]) +AS_HELP_STRING( + [--disable-dependency-tracking], + [speeds up one-time build])]) +if test "x$enable_dependency_tracking" != xno; then + am_depcomp="$ac_aux_dir/depcomp" + AMDEPBACKSLASH='\' + am__nodep='_no' +fi +AM_CONDITIONAL([AMDEP], [test "x$enable_dependency_tracking" != xno]) +AC_SUBST([AMDEPBACKSLASH])dnl +_AM_SUBST_NOTMAKE([AMDEPBACKSLASH])dnl +AC_SUBST([am__nodep])dnl +_AM_SUBST_NOTMAKE([am__nodep])dnl +]) +m4trace:/usr/share/aclocal-1.14/depout.m4:12: -1- AC_DEFUN([_AM_OUTPUT_DEPENDENCY_COMMANDS], [{ + # Older Autoconf quotes --file arguments for eval, but not when files + # are listed without --file. Let's play safe and only enable the eval + # if we detect the quoting. + case $CONFIG_FILES in + *\'*) eval set x "$CONFIG_FILES" ;; + *) set x $CONFIG_FILES ;; + esac + shift + for mf + do + # Strip MF so we end up with the name of the file. + mf=`echo "$mf" | sed -e 's/:.*$//'` + # Check whether this is an Automake generated Makefile or not. + # We used to match only the files named 'Makefile.in', but + # some people rename them; so instead we look at the file content. + # Grep'ing the first line is not enough: some people post-process + # each Makefile.in and add a new line on top of each file to say so. + # Grep'ing the whole file is not good either: AIX grep has a line + # limit of 2048, but all sed's we know have understand at least 4000. + if sed -n 's,^#.*generated by automake.*,X,p' "$mf" | grep X >/dev/null 2>&1; then + dirpart=`AS_DIRNAME("$mf")` + else + continue + fi + # Extract the definition of DEPDIR, am__include, and am__quote + # from the Makefile without running 'make'. + DEPDIR=`sed -n 's/^DEPDIR = //p' < "$mf"` + test -z "$DEPDIR" && continue + am__include=`sed -n 's/^am__include = //p' < "$mf"` + test -z "$am__include" && continue + am__quote=`sed -n 's/^am__quote = //p' < "$mf"` + # Find all dependency output files, they are included files with + # $(DEPDIR) in their names. We invoke sed twice because it is the + # simplest approach to changing $(DEPDIR) to its actual value in the + # expansion. + for file in `sed -n " + s/^$am__include $am__quote\(.*(DEPDIR).*\)$am__quote"'$/\1/p' <"$mf" | \ + sed -e 's/\$(DEPDIR)/'"$DEPDIR"'/g'`; do + # Make sure the directory exists. + test -f "$dirpart/$file" && continue + fdir=`AS_DIRNAME(["$file"])` + AS_MKDIR_P([$dirpart/$fdir]) + # echo "creating $dirpart/$file" + echo '# dummy' > "$dirpart/$file" + done + done +} +]) +m4trace:/usr/share/aclocal-1.14/depout.m4:71: -1- AC_DEFUN([AM_OUTPUT_DEPENDENCY_COMMANDS], [AC_CONFIG_COMMANDS([depfiles], + [test x"$AMDEP_TRUE" != x"" || _AM_OUTPUT_DEPENDENCY_COMMANDS], + [AMDEP_TRUE="$AMDEP_TRUE" ac_aux_dir="$ac_aux_dir"]) +]) +m4trace:/usr/share/aclocal-1.14/init.m4:29: -1- AC_DEFUN([AM_INIT_AUTOMAKE], [AC_PREREQ([2.65])dnl +dnl Autoconf wants to disallow AM_ names. We explicitly allow +dnl the ones we care about. +m4_pattern_allow([^AM_[A-Z]+FLAGS$])dnl +AC_REQUIRE([AM_SET_CURRENT_AUTOMAKE_VERSION])dnl +AC_REQUIRE([AC_PROG_INSTALL])dnl +if test "`cd $srcdir && pwd`" != "`pwd`"; then + # Use -I$(srcdir) only when $(srcdir) != ., so that make's output + # is not polluted with repeated "-I." + AC_SUBST([am__isrc], [' -I$(srcdir)'])_AM_SUBST_NOTMAKE([am__isrc])dnl + # test to see if srcdir already configured + if test -f $srcdir/config.status; then + AC_MSG_ERROR([source directory already configured; run "make distclean" there first]) + fi +fi + +# test whether we have cygpath +if test -z "$CYGPATH_W"; then + if (cygpath --version) >/dev/null 2>/dev/null; then + CYGPATH_W='cygpath -w' + else + CYGPATH_W=echo + fi +fi +AC_SUBST([CYGPATH_W]) + +# Define the identity of the package. +dnl Distinguish between old-style and new-style calls. +m4_ifval([$2], +[AC_DIAGNOSE([obsolete], + [$0: two- and three-arguments forms are deprecated.]) +m4_ifval([$3], [_AM_SET_OPTION([no-define])])dnl + AC_SUBST([PACKAGE], [$1])dnl + AC_SUBST([VERSION], [$2])], +[_AM_SET_OPTIONS([$1])dnl +dnl Diagnose old-style AC_INIT with new-style AM_AUTOMAKE_INIT. +m4_if( + m4_ifdef([AC_PACKAGE_NAME], [ok]):m4_ifdef([AC_PACKAGE_VERSION], [ok]), + [ok:ok],, + [m4_fatal([AC_INIT should be called with package and version arguments])])dnl + AC_SUBST([PACKAGE], ['AC_PACKAGE_TARNAME'])dnl + AC_SUBST([VERSION], ['AC_PACKAGE_VERSION'])])dnl + +_AM_IF_OPTION([no-define],, +[AC_DEFINE_UNQUOTED([PACKAGE], ["$PACKAGE"], [Name of package]) + AC_DEFINE_UNQUOTED([VERSION], ["$VERSION"], [Version number of package])])dnl + +# Some tools Automake needs. +AC_REQUIRE([AM_SANITY_CHECK])dnl +AC_REQUIRE([AC_ARG_PROGRAM])dnl +AM_MISSING_PROG([ACLOCAL], [aclocal-${am__api_version}]) +AM_MISSING_PROG([AUTOCONF], [autoconf]) +AM_MISSING_PROG([AUTOMAKE], [automake-${am__api_version}]) +AM_MISSING_PROG([AUTOHEADER], [autoheader]) +AM_MISSING_PROG([MAKEINFO], [makeinfo]) +AC_REQUIRE([AM_PROG_INSTALL_SH])dnl +AC_REQUIRE([AM_PROG_INSTALL_STRIP])dnl +AC_REQUIRE([AC_PROG_MKDIR_P])dnl +# For better backward compatibility. To be removed once Automake 1.9.x +# dies out for good. For more background, see: +# +# +AC_SUBST([mkdir_p], ['$(MKDIR_P)']) +# We need awk for the "check" target. The system "awk" is bad on +# some platforms. +AC_REQUIRE([AC_PROG_AWK])dnl +AC_REQUIRE([AC_PROG_MAKE_SET])dnl +AC_REQUIRE([AM_SET_LEADING_DOT])dnl +_AM_IF_OPTION([tar-ustar], [_AM_PROG_TAR([ustar])], + [_AM_IF_OPTION([tar-pax], [_AM_PROG_TAR([pax])], + [_AM_PROG_TAR([v7])])]) +_AM_IF_OPTION([no-dependencies],, +[AC_PROVIDE_IFELSE([AC_PROG_CC], + [_AM_DEPENDENCIES([CC])], + [m4_define([AC_PROG_CC], + m4_defn([AC_PROG_CC])[_AM_DEPENDENCIES([CC])])])dnl +AC_PROVIDE_IFELSE([AC_PROG_CXX], + [_AM_DEPENDENCIES([CXX])], + [m4_define([AC_PROG_CXX], + m4_defn([AC_PROG_CXX])[_AM_DEPENDENCIES([CXX])])])dnl +AC_PROVIDE_IFELSE([AC_PROG_OBJC], + [_AM_DEPENDENCIES([OBJC])], + [m4_define([AC_PROG_OBJC], + m4_defn([AC_PROG_OBJC])[_AM_DEPENDENCIES([OBJC])])])dnl +AC_PROVIDE_IFELSE([AC_PROG_OBJCXX], + [_AM_DEPENDENCIES([OBJCXX])], + [m4_define([AC_PROG_OBJCXX], + m4_defn([AC_PROG_OBJCXX])[_AM_DEPENDENCIES([OBJCXX])])])dnl +]) +AC_REQUIRE([AM_SILENT_RULES])dnl +dnl The testsuite driver may need to know about EXEEXT, so add the +dnl 'am__EXEEXT' conditional if _AM_COMPILER_EXEEXT was seen. This +dnl macro is hooked onto _AC_COMPILER_EXEEXT early, see below. +AC_CONFIG_COMMANDS_PRE(dnl +[m4_provide_if([_AM_COMPILER_EXEEXT], + [AM_CONDITIONAL([am__EXEEXT], [test -n "$EXEEXT"])])])dnl + +# POSIX will say in a future version that running "rm -f" with no argument +# is OK; and we want to be able to make that assumption in our Makefile +# recipes. So use an aggressive probe to check that the usage we want is +# actually supported "in the wild" to an acceptable degree. +# See automake bug#10828. +# To make any issue more visible, cause the running configure to be aborted +# by default if the 'rm' program in use doesn't match our expectations; the +# user can still override this though. +if rm -f && rm -fr && rm -rf; then : OK; else + cat >&2 <<'END' +Oops! + +Your 'rm' program seems unable to run without file operands specified +on the command line, even when the '-f' option is present. This is contrary +to the behaviour of most rm programs out there, and not conforming with +the upcoming POSIX standard: + +Please tell bug-automake@gnu.org about your system, including the value +of your $PATH and any error possibly output before this message. This +can help us improve future automake versions. + +END + if test x"$ACCEPT_INFERIOR_RM_PROGRAM" = x"yes"; then + echo 'Configuration will proceed anyway, since you have set the' >&2 + echo 'ACCEPT_INFERIOR_RM_PROGRAM variable to "yes"' >&2 + echo >&2 + else + cat >&2 <<'END' +Aborting the configuration process, to ensure you take notice of the issue. + +You can download and install GNU coreutils to get an 'rm' implementation +that behaves properly: . + +If you want to complete the configuration process using your problematic +'rm' anyway, export the environment variable ACCEPT_INFERIOR_RM_PROGRAM +to "yes", and re-run configure. + +END + AC_MSG_ERROR([Your 'rm' program is bad, sorry.]) + fi +fi +]) +m4trace:/usr/share/aclocal-1.14/init.m4:183: -1- AC_DEFUN([_AC_AM_CONFIG_HEADER_HOOK], [# Compute $1's index in $config_headers. +_am_arg=$1 +_am_stamp_count=1 +for _am_header in $config_headers :; do + case $_am_header in + $_am_arg | $_am_arg:* ) + break ;; + * ) + _am_stamp_count=`expr $_am_stamp_count + 1` ;; + esac +done +echo "timestamp for $_am_arg" >`AS_DIRNAME(["$_am_arg"])`/stamp-h[]$_am_stamp_count]) +m4trace:/usr/share/aclocal-1.14/install-sh.m4:11: -1- AC_DEFUN([AM_PROG_INSTALL_SH], [AC_REQUIRE([AM_AUX_DIR_EXPAND])dnl +if test x"${install_sh}" != xset; then + case $am_aux_dir in + *\ * | *\ *) + install_sh="\${SHELL} '$am_aux_dir/install-sh'" ;; + *) + install_sh="\${SHELL} $am_aux_dir/install-sh" + esac +fi +AC_SUBST([install_sh])]) +m4trace:/usr/share/aclocal-1.14/lead-dot.m4:10: -1- AC_DEFUN([AM_SET_LEADING_DOT], [rm -rf .tst 2>/dev/null +mkdir .tst 2>/dev/null +if test -d .tst; then + am__leading_dot=. +else + am__leading_dot=_ +fi +rmdir .tst 2>/dev/null +AC_SUBST([am__leading_dot])]) +m4trace:/usr/share/aclocal-1.14/make.m4:12: -1- AC_DEFUN([AM_MAKE_INCLUDE], [am_make=${MAKE-make} +cat > confinc << 'END' +am__doit: + @echo this is the am__doit target +.PHONY: am__doit +END +# If we don't find an include directive, just comment out the code. +AC_MSG_CHECKING([for style of include used by $am_make]) +am__include="#" +am__quote= +_am_result=none +# First try GNU make style include. +echo "include confinc" > confmf +# Ignore all kinds of additional output from 'make'. +case `$am_make -s -f confmf 2> /dev/null` in #( +*the\ am__doit\ target*) + am__include=include + am__quote= + _am_result=GNU + ;; +esac +# Now try BSD make style include. +if test "$am__include" = "#"; then + echo '.include "confinc"' > confmf + case `$am_make -s -f confmf 2> /dev/null` in #( + *the\ am__doit\ target*) + am__include=.include + am__quote="\"" + _am_result=BSD + ;; + esac +fi +AC_SUBST([am__include]) +AC_SUBST([am__quote]) +AC_MSG_RESULT([$_am_result]) +rm -f confinc confmf +]) +m4trace:/usr/share/aclocal-1.14/missing.m4:11: -1- AC_DEFUN([AM_MISSING_PROG], [AC_REQUIRE([AM_MISSING_HAS_RUN]) +$1=${$1-"${am_missing_run}$2"} +AC_SUBST($1)]) +m4trace:/usr/share/aclocal-1.14/missing.m4:20: -1- AC_DEFUN([AM_MISSING_HAS_RUN], [AC_REQUIRE([AM_AUX_DIR_EXPAND])dnl +AC_REQUIRE_AUX_FILE([missing])dnl +if test x"${MISSING+set}" != xset; then + case $am_aux_dir in + *\ * | *\ *) + MISSING="\${SHELL} \"$am_aux_dir/missing\"" ;; + *) + MISSING="\${SHELL} $am_aux_dir/missing" ;; + esac +fi +# Use eval to expand $SHELL +if eval "$MISSING --is-lightweight"; then + am_missing_run="$MISSING " +else + am_missing_run= + AC_MSG_WARN(['missing' script is too old or missing]) +fi +]) +m4trace:/usr/share/aclocal-1.14/options.m4:11: -1- AC_DEFUN([_AM_MANGLE_OPTION], [[_AM_OPTION_]m4_bpatsubst($1, [[^a-zA-Z0-9_]], [_])]) +m4trace:/usr/share/aclocal-1.14/options.m4:17: -1- AC_DEFUN([_AM_SET_OPTION], [m4_define(_AM_MANGLE_OPTION([$1]), [1])]) +m4trace:/usr/share/aclocal-1.14/options.m4:23: -1- AC_DEFUN([_AM_SET_OPTIONS], [m4_foreach_w([_AM_Option], [$1], [_AM_SET_OPTION(_AM_Option)])]) +m4trace:/usr/share/aclocal-1.14/options.m4:29: -1- AC_DEFUN([_AM_IF_OPTION], [m4_ifset(_AM_MANGLE_OPTION([$1]), [$2], [$3])]) +m4trace:/usr/share/aclocal-1.14/prog-cc-c-o.m4:12: -1- AC_DEFUN([_AM_PROG_CC_C_O], [AC_REQUIRE([AM_AUX_DIR_EXPAND])dnl +AC_REQUIRE_AUX_FILE([compile])dnl +AC_LANG_PUSH([C])dnl +AC_CACHE_CHECK( + [whether $CC understands -c and -o together], + [am_cv_prog_cc_c_o], + [AC_LANG_CONFTEST([AC_LANG_PROGRAM([])]) + # Make sure it works both with $CC and with simple cc. + # Following AC_PROG_CC_C_O, we do the test twice because some + # compilers refuse to overwrite an existing .o file with -o, + # though they will create one. + am_cv_prog_cc_c_o=yes + for am_i in 1 2; do + if AM_RUN_LOG([$CC -c conftest.$ac_ext -o conftest2.$ac_objext]) \ + && test -f conftest2.$ac_objext; then + : OK + else + am_cv_prog_cc_c_o=no + break + fi + done + rm -f core conftest* + unset am_i]) +if test "$am_cv_prog_cc_c_o" != yes; then + # Losing compiler, so override with the script. + # FIXME: It is wrong to rewrite CC. + # But if we don't then we get into trouble of one sort or another. + # A longer-term fix would be to have automake use am__CC in this case, + # and then we could set am__CC="\$(top_srcdir)/compile \$(CC)" + CC="$am_aux_dir/compile $CC" +fi +AC_LANG_POP([C])]) +m4trace:/usr/share/aclocal-1.14/prog-cc-c-o.m4:47: -1- AC_DEFUN_ONCE([AM_PROG_CC_C_O], [AC_REQUIRE([AC_PROG_CC])]) +m4trace:/usr/share/aclocal-1.14/runlog.m4:12: -1- AC_DEFUN([AM_RUN_LOG], [{ echo "$as_me:$LINENO: $1" >&AS_MESSAGE_LOG_FD + ($1) >&AS_MESSAGE_LOG_FD 2>&AS_MESSAGE_LOG_FD + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&AS_MESSAGE_LOG_FD + (exit $ac_status); }]) +m4trace:/usr/share/aclocal-1.14/sanity.m4:11: -1- AC_DEFUN([AM_SANITY_CHECK], [AC_MSG_CHECKING([whether build environment is sane]) +# Reject unsafe characters in $srcdir or the absolute working directory +# name. Accept space and tab only in the latter. +am_lf=' +' +case `pwd` in + *[[\\\"\#\$\&\'\`$am_lf]]*) + AC_MSG_ERROR([unsafe absolute working directory name]);; +esac +case $srcdir in + *[[\\\"\#\$\&\'\`$am_lf\ \ ]]*) + AC_MSG_ERROR([unsafe srcdir value: '$srcdir']);; +esac + +# Do 'set' in a subshell so we don't clobber the current shell's +# arguments. Must try -L first in case configure is actually a +# symlink; some systems play weird games with the mod time of symlinks +# (eg FreeBSD returns the mod time of the symlink's containing +# directory). +if ( + am_has_slept=no + for am_try in 1 2; do + echo "timestamp, slept: $am_has_slept" > conftest.file + set X `ls -Lt "$srcdir/configure" conftest.file 2> /dev/null` + if test "$[*]" = "X"; then + # -L didn't work. + set X `ls -t "$srcdir/configure" conftest.file` + fi + if test "$[*]" != "X $srcdir/configure conftest.file" \ + && test "$[*]" != "X conftest.file $srcdir/configure"; then + + # If neither matched, then we have a broken ls. This can happen + # if, for instance, CONFIG_SHELL is bash and it inherits a + # broken ls alias from the environment. This has actually + # happened. Such a system could not be considered "sane". + AC_MSG_ERROR([ls -t appears to fail. Make sure there is not a broken + alias in your environment]) + fi + if test "$[2]" = conftest.file || test $am_try -eq 2; then + break + fi + # Just in case. + sleep 1 + am_has_slept=yes + done + test "$[2]" = conftest.file + ) +then + # Ok. + : +else + AC_MSG_ERROR([newly created file is older than distributed files! +Check your system clock]) +fi +AC_MSG_RESULT([yes]) +# If we didn't sleep, we still need to ensure time stamps of config.status and +# generated files are strictly newer. +am_sleep_pid= +if grep 'slept: no' conftest.file >/dev/null 2>&1; then + ( sleep 1 ) & + am_sleep_pid=$! +fi +AC_CONFIG_COMMANDS_PRE( + [AC_MSG_CHECKING([that generated files are newer than configure]) + if test -n "$am_sleep_pid"; then + # Hide warnings about reused PIDs. + wait $am_sleep_pid 2>/dev/null + fi + AC_MSG_RESULT([done])]) +rm -f conftest.file +]) +m4trace:/usr/share/aclocal-1.14/silent.m4:12: -1- AC_DEFUN([AM_SILENT_RULES], [AC_ARG_ENABLE([silent-rules], [dnl +AS_HELP_STRING( + [--enable-silent-rules], + [less verbose build output (undo: "make V=1")]) +AS_HELP_STRING( + [--disable-silent-rules], + [verbose build output (undo: "make V=0")])dnl +]) +case $enable_silent_rules in @%:@ ((( + yes) AM_DEFAULT_VERBOSITY=0;; + no) AM_DEFAULT_VERBOSITY=1;; + *) AM_DEFAULT_VERBOSITY=m4_if([$1], [yes], [0], [1]);; +esac +dnl +dnl A few 'make' implementations (e.g., NonStop OS and NextStep) +dnl do not support nested variable expansions. +dnl See automake bug#9928 and bug#10237. +am_make=${MAKE-make} +AC_CACHE_CHECK([whether $am_make supports nested variables], + [am_cv_make_support_nested_variables], + [if AS_ECHO([['TRUE=$(BAR$(V)) +BAR0=false +BAR1=true +V=1 +am__doit: + @$(TRUE) +.PHONY: am__doit']]) | $am_make -f - >/dev/null 2>&1; then + am_cv_make_support_nested_variables=yes +else + am_cv_make_support_nested_variables=no +fi]) +if test $am_cv_make_support_nested_variables = yes; then + dnl Using '$V' instead of '$(V)' breaks IRIX make. + AM_V='$(V)' + AM_DEFAULT_V='$(AM_DEFAULT_VERBOSITY)' +else + AM_V=$AM_DEFAULT_VERBOSITY + AM_DEFAULT_V=$AM_DEFAULT_VERBOSITY +fi +AC_SUBST([AM_V])dnl +AM_SUBST_NOTMAKE([AM_V])dnl +AC_SUBST([AM_DEFAULT_V])dnl +AM_SUBST_NOTMAKE([AM_DEFAULT_V])dnl +AC_SUBST([AM_DEFAULT_VERBOSITY])dnl +AM_BACKSLASH='\' +AC_SUBST([AM_BACKSLASH])dnl +_AM_SUBST_NOTMAKE([AM_BACKSLASH])dnl +]) +m4trace:/usr/share/aclocal-1.14/strip.m4:17: -1- AC_DEFUN([AM_PROG_INSTALL_STRIP], [AC_REQUIRE([AM_PROG_INSTALL_SH])dnl +# Installed binaries are usually stripped using 'strip' when the user +# run "make install-strip". However 'strip' might not be the right +# tool to use in cross-compilation environments, therefore Automake +# will honor the 'STRIP' environment variable to overrule this program. +dnl Don't test for $cross_compiling = yes, because it might be 'maybe'. +if test "$cross_compiling" != no; then + AC_CHECK_TOOL([STRIP], [strip], :) +fi +INSTALL_STRIP_PROGRAM="\$(install_sh) -c -s" +AC_SUBST([INSTALL_STRIP_PROGRAM])]) +m4trace:/usr/share/aclocal-1.14/substnot.m4:12: -1- AC_DEFUN([_AM_SUBST_NOTMAKE]) +m4trace:/usr/share/aclocal-1.14/substnot.m4:17: -1- AC_DEFUN([AM_SUBST_NOTMAKE], [_AM_SUBST_NOTMAKE($@)]) +m4trace:/usr/share/aclocal-1.14/tar.m4:23: -1- AC_DEFUN([_AM_PROG_TAR], [# Always define AMTAR for backward compatibility. Yes, it's still used +# in the wild :-( We should find a proper way to deprecate it ... +AC_SUBST([AMTAR], ['$${TAR-tar}']) + +# We'll loop over all known methods to create a tar archive until one works. +_am_tools='gnutar m4_if([$1], [ustar], [plaintar]) pax cpio none' + +m4_if([$1], [v7], + [am__tar='$${TAR-tar} chof - "$$tardir"' am__untar='$${TAR-tar} xf -'], + + [m4_case([$1], + [ustar], + [# The POSIX 1988 'ustar' format is defined with fixed-size fields. + # There is notably a 21 bits limit for the UID and the GID. In fact, + # the 'pax' utility can hang on bigger UID/GID (see automake bug#8343 + # and bug#13588). + am_max_uid=2097151 # 2^21 - 1 + am_max_gid=$am_max_uid + # The $UID and $GID variables are not portable, so we need to resort + # to the POSIX-mandated id(1) utility. Errors in the 'id' calls + # below are definitely unexpected, so allow the users to see them + # (that is, avoid stderr redirection). + am_uid=`id -u || echo unknown` + am_gid=`id -g || echo unknown` + AC_MSG_CHECKING([whether UID '$am_uid' is supported by ustar format]) + if test $am_uid -le $am_max_uid; then + AC_MSG_RESULT([yes]) + else + AC_MSG_RESULT([no]) + _am_tools=none + fi + AC_MSG_CHECKING([whether GID '$am_gid' is supported by ustar format]) + if test $am_gid -le $am_max_gid; then + AC_MSG_RESULT([yes]) + else + AC_MSG_RESULT([no]) + _am_tools=none + fi], + + [pax], + [], + + [m4_fatal([Unknown tar format])]) + + AC_MSG_CHECKING([how to create a $1 tar archive]) + + # Go ahead even if we have the value already cached. We do so because we + # need to set the values for the 'am__tar' and 'am__untar' variables. + _am_tools=${am_cv_prog_tar_$1-$_am_tools} + + for _am_tool in $_am_tools; do + case $_am_tool in + gnutar) + for _am_tar in tar gnutar gtar; do + AM_RUN_LOG([$_am_tar --version]) && break + done + am__tar="$_am_tar --format=m4_if([$1], [pax], [posix], [$1]) -chf - "'"$$tardir"' + am__tar_="$_am_tar --format=m4_if([$1], [pax], [posix], [$1]) -chf - "'"$tardir"' + am__untar="$_am_tar -xf -" + ;; + plaintar) + # Must skip GNU tar: if it does not support --format= it doesn't create + # ustar tarball either. + (tar --version) >/dev/null 2>&1 && continue + am__tar='tar chf - "$$tardir"' + am__tar_='tar chf - "$tardir"' + am__untar='tar xf -' + ;; + pax) + am__tar='pax -L -x $1 -w "$$tardir"' + am__tar_='pax -L -x $1 -w "$tardir"' + am__untar='pax -r' + ;; + cpio) + am__tar='find "$$tardir" -print | cpio -o -H $1 -L' + am__tar_='find "$tardir" -print | cpio -o -H $1 -L' + am__untar='cpio -i -H $1 -d' + ;; + none) + am__tar=false + am__tar_=false + am__untar=false + ;; + esac + + # If the value was cached, stop now. We just wanted to have am__tar + # and am__untar set. + test -n "${am_cv_prog_tar_$1}" && break + + # tar/untar a dummy directory, and stop if the command works. + rm -rf conftest.dir + mkdir conftest.dir + echo GrepMe > conftest.dir/file + AM_RUN_LOG([tardir=conftest.dir && eval $am__tar_ >conftest.tar]) + rm -rf conftest.dir + if test -s conftest.tar; then + AM_RUN_LOG([$am__untar /dev/null 2>&1 && break + fi + done + rm -rf conftest.dir + + AC_CACHE_VAL([am_cv_prog_tar_$1], [am_cv_prog_tar_$1=$_am_tool]) + AC_MSG_RESULT([$am_cv_prog_tar_$1])]) + +AC_SUBST([am__tar]) +AC_SUBST([am__untar]) +]) +m4trace:configure.ac:2: -1- m4_pattern_forbid([^_?A[CHUM]_]) +m4trace:configure.ac:2: -1- m4_pattern_forbid([_AC_]) +m4trace:configure.ac:2: -1- m4_pattern_forbid([^LIBOBJS$], [do not use LIBOBJS directly, use AC_LIBOBJ (see section `AC_LIBOBJ vs LIBOBJS']) +m4trace:configure.ac:2: -1- m4_pattern_allow([^AS_FLAGS$]) +m4trace:configure.ac:2: -1- m4_pattern_forbid([^_?m4_]) +m4trace:configure.ac:2: -1- m4_pattern_forbid([^dnl$]) +m4trace:configure.ac:2: -1- m4_pattern_forbid([^_?AS_]) +m4trace:configure.ac:2: -1- m4_pattern_allow([^SHELL$]) +m4trace:configure.ac:2: -1- m4_pattern_allow([^PATH_SEPARATOR$]) +m4trace:configure.ac:2: -1- m4_pattern_allow([^PACKAGE_NAME$]) +m4trace:configure.ac:2: -1- m4_pattern_allow([^PACKAGE_TARNAME$]) +m4trace:configure.ac:2: -1- m4_pattern_allow([^PACKAGE_VERSION$]) +m4trace:configure.ac:2: -1- m4_pattern_allow([^PACKAGE_STRING$]) +m4trace:configure.ac:2: -1- m4_pattern_allow([^PACKAGE_BUGREPORT$]) +m4trace:configure.ac:2: -1- m4_pattern_allow([^PACKAGE_URL$]) +m4trace:configure.ac:2: -1- m4_pattern_allow([^exec_prefix$]) +m4trace:configure.ac:2: -1- m4_pattern_allow([^prefix$]) +m4trace:configure.ac:2: -1- m4_pattern_allow([^program_transform_name$]) +m4trace:configure.ac:2: -1- m4_pattern_allow([^bindir$]) +m4trace:configure.ac:2: -1- m4_pattern_allow([^sbindir$]) +m4trace:configure.ac:2: -1- m4_pattern_allow([^libexecdir$]) +m4trace:configure.ac:2: -1- m4_pattern_allow([^datarootdir$]) +m4trace:configure.ac:2: -1- m4_pattern_allow([^datadir$]) +m4trace:configure.ac:2: -1- m4_pattern_allow([^sysconfdir$]) +m4trace:configure.ac:2: -1- m4_pattern_allow([^sharedstatedir$]) +m4trace:configure.ac:2: -1- m4_pattern_allow([^localstatedir$]) +m4trace:configure.ac:2: -1- m4_pattern_allow([^includedir$]) +m4trace:configure.ac:2: -1- m4_pattern_allow([^oldincludedir$]) +m4trace:configure.ac:2: -1- m4_pattern_allow([^docdir$]) +m4trace:configure.ac:2: -1- m4_pattern_allow([^infodir$]) +m4trace:configure.ac:2: -1- m4_pattern_allow([^htmldir$]) +m4trace:configure.ac:2: -1- m4_pattern_allow([^dvidir$]) +m4trace:configure.ac:2: -1- m4_pattern_allow([^pdfdir$]) +m4trace:configure.ac:2: -1- m4_pattern_allow([^psdir$]) +m4trace:configure.ac:2: -1- m4_pattern_allow([^libdir$]) +m4trace:configure.ac:2: -1- m4_pattern_allow([^localedir$]) +m4trace:configure.ac:2: -1- m4_pattern_allow([^mandir$]) +m4trace:configure.ac:2: -1- m4_pattern_allow([^PACKAGE_NAME$]) +m4trace:configure.ac:2: -1- m4_pattern_allow([^PACKAGE_TARNAME$]) +m4trace:configure.ac:2: -1- m4_pattern_allow([^PACKAGE_VERSION$]) +m4trace:configure.ac:2: -1- m4_pattern_allow([^PACKAGE_STRING$]) +m4trace:configure.ac:2: -1- m4_pattern_allow([^PACKAGE_BUGREPORT$]) +m4trace:configure.ac:2: -1- m4_pattern_allow([^PACKAGE_URL$]) +m4trace:configure.ac:2: -1- m4_pattern_allow([^DEFS$]) +m4trace:configure.ac:2: -1- m4_pattern_allow([^ECHO_C$]) +m4trace:configure.ac:2: -1- m4_pattern_allow([^ECHO_N$]) +m4trace:configure.ac:2: -1- m4_pattern_allow([^ECHO_T$]) +m4trace:configure.ac:2: -1- m4_pattern_allow([^LIBS$]) +m4trace:configure.ac:2: -1- m4_pattern_allow([^build_alias$]) +m4trace:configure.ac:2: -1- m4_pattern_allow([^host_alias$]) +m4trace:configure.ac:2: -1- m4_pattern_allow([^target_alias$]) +m4trace:configure.ac:3: -1- AM_INIT_AUTOMAKE([silent-rules]) +m4trace:configure.ac:3: -1- m4_pattern_allow([^AM_[A-Z]+FLAGS$]) +m4trace:configure.ac:3: -1- AM_SET_CURRENT_AUTOMAKE_VERSION +m4trace:configure.ac:3: -1- AM_AUTOMAKE_VERSION([1.14.1]) +m4trace:configure.ac:3: -1- _AM_AUTOCONF_VERSION([2.69]) +m4trace:configure.ac:3: -1- m4_pattern_allow([^INSTALL_PROGRAM$]) +m4trace:configure.ac:3: -1- m4_pattern_allow([^INSTALL_SCRIPT$]) +m4trace:configure.ac:3: -1- m4_pattern_allow([^INSTALL_DATA$]) +m4trace:configure.ac:3: -1- m4_pattern_allow([^am__isrc$]) +m4trace:configure.ac:3: -1- _AM_SUBST_NOTMAKE([am__isrc]) +m4trace:configure.ac:3: -1- m4_pattern_allow([^CYGPATH_W$]) +m4trace:configure.ac:3: -1- _AM_SET_OPTIONS([silent-rules]) +m4trace:configure.ac:3: -1- _AM_SET_OPTION([silent-rules]) +m4trace:configure.ac:3: -2- _AM_MANGLE_OPTION([silent-rules]) +m4trace:configure.ac:3: -1- m4_pattern_allow([^PACKAGE$]) +m4trace:configure.ac:3: -1- m4_pattern_allow([^VERSION$]) +m4trace:configure.ac:3: -1- _AM_IF_OPTION([no-define], [], [AC_DEFINE_UNQUOTED([PACKAGE], ["$PACKAGE"], [Name of package]) + AC_DEFINE_UNQUOTED([VERSION], ["$VERSION"], [Version number of package])]) +m4trace:configure.ac:3: -2- _AM_MANGLE_OPTION([no-define]) +m4trace:configure.ac:3: -1- m4_pattern_allow([^PACKAGE$]) +m4trace:configure.ac:3: -1- m4_pattern_allow([^VERSION$]) +m4trace:configure.ac:3: -1- AM_SANITY_CHECK +m4trace:configure.ac:3: -1- AM_MISSING_PROG([ACLOCAL], [aclocal-${am__api_version}]) +m4trace:configure.ac:3: -1- AM_MISSING_HAS_RUN +m4trace:configure.ac:3: -1- AM_AUX_DIR_EXPAND +m4trace:configure.ac:3: -1- m4_pattern_allow([^ACLOCAL$]) +m4trace:configure.ac:3: -1- AM_MISSING_PROG([AUTOCONF], [autoconf]) +m4trace:configure.ac:3: -1- m4_pattern_allow([^AUTOCONF$]) +m4trace:configure.ac:3: -1- AM_MISSING_PROG([AUTOMAKE], [automake-${am__api_version}]) +m4trace:configure.ac:3: -1- m4_pattern_allow([^AUTOMAKE$]) +m4trace:configure.ac:3: -1- AM_MISSING_PROG([AUTOHEADER], [autoheader]) +m4trace:configure.ac:3: -1- m4_pattern_allow([^AUTOHEADER$]) +m4trace:configure.ac:3: -1- AM_MISSING_PROG([MAKEINFO], [makeinfo]) +m4trace:configure.ac:3: -1- m4_pattern_allow([^MAKEINFO$]) +m4trace:configure.ac:3: -1- AM_PROG_INSTALL_SH +m4trace:configure.ac:3: -1- m4_pattern_allow([^install_sh$]) +m4trace:configure.ac:3: -1- AM_PROG_INSTALL_STRIP +m4trace:configure.ac:3: -1- m4_pattern_allow([^STRIP$]) +m4trace:configure.ac:3: -1- m4_pattern_allow([^INSTALL_STRIP_PROGRAM$]) +m4trace:configure.ac:3: -1- m4_pattern_allow([^MKDIR_P$]) +m4trace:configure.ac:3: -1- m4_pattern_allow([^mkdir_p$]) +m4trace:configure.ac:3: -1- m4_pattern_allow([^AWK$]) +m4trace:configure.ac:3: -1- m4_pattern_allow([^SET_MAKE$]) +m4trace:configure.ac:3: -1- AM_SET_LEADING_DOT +m4trace:configure.ac:3: -1- m4_pattern_allow([^am__leading_dot$]) +m4trace:configure.ac:3: -1- _AM_IF_OPTION([tar-ustar], [_AM_PROG_TAR([ustar])], [_AM_IF_OPTION([tar-pax], [_AM_PROG_TAR([pax])], + [_AM_PROG_TAR([v7])])]) +m4trace:configure.ac:3: -2- _AM_MANGLE_OPTION([tar-ustar]) +m4trace:configure.ac:3: -1- _AM_IF_OPTION([tar-pax], [_AM_PROG_TAR([pax])], [_AM_PROG_TAR([v7])]) +m4trace:configure.ac:3: -2- _AM_MANGLE_OPTION([tar-pax]) +m4trace:configure.ac:3: -1- _AM_PROG_TAR([v7]) +m4trace:configure.ac:3: -1- m4_pattern_allow([^AMTAR$]) +m4trace:configure.ac:3: -1- m4_pattern_allow([^am__tar$]) +m4trace:configure.ac:3: -1- m4_pattern_allow([^am__untar$]) +m4trace:configure.ac:3: -1- _AM_IF_OPTION([no-dependencies], [], [AC_PROVIDE_IFELSE([AC_PROG_CC], + [_AM_DEPENDENCIES([CC])], + [m4_define([AC_PROG_CC], + m4_defn([AC_PROG_CC])[_AM_DEPENDENCIES([CC])])])dnl +AC_PROVIDE_IFELSE([AC_PROG_CXX], + [_AM_DEPENDENCIES([CXX])], + [m4_define([AC_PROG_CXX], + m4_defn([AC_PROG_CXX])[_AM_DEPENDENCIES([CXX])])])dnl +AC_PROVIDE_IFELSE([AC_PROG_OBJC], + [_AM_DEPENDENCIES([OBJC])], + [m4_define([AC_PROG_OBJC], + m4_defn([AC_PROG_OBJC])[_AM_DEPENDENCIES([OBJC])])])dnl +AC_PROVIDE_IFELSE([AC_PROG_OBJCXX], + [_AM_DEPENDENCIES([OBJCXX])], + [m4_define([AC_PROG_OBJCXX], + m4_defn([AC_PROG_OBJCXX])[_AM_DEPENDENCIES([OBJCXX])])])dnl +]) +m4trace:configure.ac:3: -2- _AM_MANGLE_OPTION([no-dependencies]) +m4trace:configure.ac:3: -1- AM_SILENT_RULES +m4trace:configure.ac:3: -1- m4_pattern_allow([^AM_V$]) +m4trace:configure.ac:3: -1- AM_SUBST_NOTMAKE([AM_V]) +m4trace:configure.ac:3: -1- _AM_SUBST_NOTMAKE([AM_V]) +m4trace:configure.ac:3: -1- m4_pattern_allow([^AM_DEFAULT_V$]) +m4trace:configure.ac:3: -1- AM_SUBST_NOTMAKE([AM_DEFAULT_V]) +m4trace:configure.ac:3: -1- _AM_SUBST_NOTMAKE([AM_DEFAULT_V]) +m4trace:configure.ac:3: -1- m4_pattern_allow([^AM_DEFAULT_VERBOSITY$]) +m4trace:configure.ac:3: -1- m4_pattern_allow([^AM_BACKSLASH$]) +m4trace:configure.ac:3: -1- _AM_SUBST_NOTMAKE([AM_BACKSLASH]) +m4trace:configure.ac:8: -1- m4_pattern_allow([^CC$]) +m4trace:configure.ac:8: -1- m4_pattern_allow([^CFLAGS$]) +m4trace:configure.ac:8: -1- m4_pattern_allow([^LDFLAGS$]) +m4trace:configure.ac:8: -1- m4_pattern_allow([^LIBS$]) +m4trace:configure.ac:8: -1- m4_pattern_allow([^CPPFLAGS$]) +m4trace:configure.ac:8: -1- m4_pattern_allow([^CC$]) +m4trace:configure.ac:8: -1- m4_pattern_allow([^CC$]) +m4trace:configure.ac:8: -1- m4_pattern_allow([^CC$]) +m4trace:configure.ac:8: -1- m4_pattern_allow([^CC$]) +m4trace:configure.ac:8: -1- m4_pattern_allow([^ac_ct_CC$]) +m4trace:configure.ac:8: -1- m4_pattern_allow([^EXEEXT$]) +m4trace:configure.ac:8: -1- m4_pattern_allow([^OBJEXT$]) +m4trace:configure.ac:8: -1- _AM_PROG_CC_C_O +m4trace:configure.ac:8: -1- AM_RUN_LOG([$CC -c conftest.$ac_ext -o conftest2.$ac_objext]) +m4trace:configure.ac:8: -1- _AM_DEPENDENCIES([CC]) +m4trace:configure.ac:8: -1- AM_SET_DEPDIR +m4trace:configure.ac:8: -1- m4_pattern_allow([^DEPDIR$]) +m4trace:configure.ac:8: -1- AM_OUTPUT_DEPENDENCY_COMMANDS +m4trace:configure.ac:8: -1- AM_MAKE_INCLUDE +m4trace:configure.ac:8: -1- m4_pattern_allow([^am__include$]) +m4trace:configure.ac:8: -1- m4_pattern_allow([^am__quote$]) +m4trace:configure.ac:8: -1- AM_DEP_TRACK +m4trace:configure.ac:8: -1- AM_CONDITIONAL([AMDEP], [test "x$enable_dependency_tracking" != xno]) +m4trace:configure.ac:8: -1- m4_pattern_allow([^AMDEP_TRUE$]) +m4trace:configure.ac:8: -1- m4_pattern_allow([^AMDEP_FALSE$]) +m4trace:configure.ac:8: -1- _AM_SUBST_NOTMAKE([AMDEP_TRUE]) +m4trace:configure.ac:8: -1- _AM_SUBST_NOTMAKE([AMDEP_FALSE]) +m4trace:configure.ac:8: -1- m4_pattern_allow([^AMDEPBACKSLASH$]) +m4trace:configure.ac:8: -1- _AM_SUBST_NOTMAKE([AMDEPBACKSLASH]) +m4trace:configure.ac:8: -1- m4_pattern_allow([^am__nodep$]) +m4trace:configure.ac:8: -1- _AM_SUBST_NOTMAKE([am__nodep]) +m4trace:configure.ac:8: -1- m4_pattern_allow([^CCDEPMODE$]) +m4trace:configure.ac:8: -1- AM_CONDITIONAL([am__fastdepCC], [ + test "x$enable_dependency_tracking" != xno \ + && test "$am_cv_CC_dependencies_compiler_type" = gcc3]) +m4trace:configure.ac:8: -1- m4_pattern_allow([^am__fastdepCC_TRUE$]) +m4trace:configure.ac:8: -1- m4_pattern_allow([^am__fastdepCC_FALSE$]) +m4trace:configure.ac:8: -1- _AM_SUBST_NOTMAKE([am__fastdepCC_TRUE]) +m4trace:configure.ac:8: -1- _AM_SUBST_NOTMAKE([am__fastdepCC_FALSE]) +m4trace:configure.ac:10: -1- AM_PROG_CC_C_O +m4trace:configure.ac:21: -1- m4_pattern_allow([^LIB@&t@OBJS$]) +m4trace:configure.ac:21: -1- m4_pattern_allow([^LTLIBOBJS$]) +m4trace:configure.ac:21: -1- AM_CONDITIONAL([am__EXEEXT], [test -n "$EXEEXT"]) +m4trace:configure.ac:21: -1- m4_pattern_allow([^am__EXEEXT_TRUE$]) +m4trace:configure.ac:21: -1- m4_pattern_allow([^am__EXEEXT_FALSE$]) +m4trace:configure.ac:21: -1- _AM_SUBST_NOTMAKE([am__EXEEXT_TRUE]) +m4trace:configure.ac:21: -1- _AM_SUBST_NOTMAKE([am__EXEEXT_FALSE]) +m4trace:configure.ac:21: -1- _AC_AM_CONFIG_HEADER_HOOK(["$ac_file"]) +m4trace:configure.ac:21: -1- _AM_OUTPUT_DEPENDENCY_COMMANDS diff --git a/examples/yocto/meta-mini/recipes-hello/autohello/files/autohello/autom4te.cache/traces.1 b/examples/yocto/meta-mini/recipes-hello/autohello/files/autohello/autom4te.cache/traces.1 new file mode 100644 index 0000000..b0c03d0 --- /dev/null +++ b/examples/yocto/meta-mini/recipes-hello/autohello/files/autohello/autom4te.cache/traces.1 @@ -0,0 +1,354 @@ +m4trace:configure.ac:2: -1- AC_INIT([autohello], [1.1], [maunt@linutronix.de]) +m4trace:configure.ac:2: -1- m4_pattern_forbid([^_?A[CHUM]_]) +m4trace:configure.ac:2: -1- m4_pattern_forbid([_AC_]) +m4trace:configure.ac:2: -1- m4_pattern_forbid([^LIBOBJS$], [do not use LIBOBJS directly, use AC_LIBOBJ (see section `AC_LIBOBJ vs LIBOBJS']) +m4trace:configure.ac:2: -1- m4_pattern_allow([^AS_FLAGS$]) +m4trace:configure.ac:2: -1- m4_pattern_forbid([^_?m4_]) +m4trace:configure.ac:2: -1- m4_pattern_forbid([^dnl$]) +m4trace:configure.ac:2: -1- m4_pattern_forbid([^_?AS_]) +m4trace:configure.ac:2: -1- AC_SUBST([SHELL]) +m4trace:configure.ac:2: -1- AC_SUBST_TRACE([SHELL]) +m4trace:configure.ac:2: -1- m4_pattern_allow([^SHELL$]) +m4trace:configure.ac:2: -1- AC_SUBST([PATH_SEPARATOR]) +m4trace:configure.ac:2: -1- AC_SUBST_TRACE([PATH_SEPARATOR]) +m4trace:configure.ac:2: -1- m4_pattern_allow([^PATH_SEPARATOR$]) +m4trace:configure.ac:2: -1- AC_SUBST([PACKAGE_NAME], [m4_ifdef([AC_PACKAGE_NAME], ['AC_PACKAGE_NAME'])]) +m4trace:configure.ac:2: -1- AC_SUBST_TRACE([PACKAGE_NAME]) +m4trace:configure.ac:2: -1- m4_pattern_allow([^PACKAGE_NAME$]) +m4trace:configure.ac:2: -1- AC_SUBST([PACKAGE_TARNAME], [m4_ifdef([AC_PACKAGE_TARNAME], ['AC_PACKAGE_TARNAME'])]) +m4trace:configure.ac:2: -1- AC_SUBST_TRACE([PACKAGE_TARNAME]) +m4trace:configure.ac:2: -1- m4_pattern_allow([^PACKAGE_TARNAME$]) +m4trace:configure.ac:2: -1- AC_SUBST([PACKAGE_VERSION], [m4_ifdef([AC_PACKAGE_VERSION], ['AC_PACKAGE_VERSION'])]) +m4trace:configure.ac:2: -1- AC_SUBST_TRACE([PACKAGE_VERSION]) +m4trace:configure.ac:2: -1- m4_pattern_allow([^PACKAGE_VERSION$]) +m4trace:configure.ac:2: -1- AC_SUBST([PACKAGE_STRING], [m4_ifdef([AC_PACKAGE_STRING], ['AC_PACKAGE_STRING'])]) +m4trace:configure.ac:2: -1- AC_SUBST_TRACE([PACKAGE_STRING]) +m4trace:configure.ac:2: -1- m4_pattern_allow([^PACKAGE_STRING$]) +m4trace:configure.ac:2: -1- AC_SUBST([PACKAGE_BUGREPORT], [m4_ifdef([AC_PACKAGE_BUGREPORT], ['AC_PACKAGE_BUGREPORT'])]) +m4trace:configure.ac:2: -1- AC_SUBST_TRACE([PACKAGE_BUGREPORT]) +m4trace:configure.ac:2: -1- m4_pattern_allow([^PACKAGE_BUGREPORT$]) +m4trace:configure.ac:2: -1- AC_SUBST([PACKAGE_URL], [m4_ifdef([AC_PACKAGE_URL], ['AC_PACKAGE_URL'])]) +m4trace:configure.ac:2: -1- AC_SUBST_TRACE([PACKAGE_URL]) +m4trace:configure.ac:2: -1- m4_pattern_allow([^PACKAGE_URL$]) +m4trace:configure.ac:2: -1- AC_SUBST([exec_prefix], [NONE]) +m4trace:configure.ac:2: -1- AC_SUBST_TRACE([exec_prefix]) +m4trace:configure.ac:2: -1- m4_pattern_allow([^exec_prefix$]) +m4trace:configure.ac:2: -1- AC_SUBST([prefix], [NONE]) +m4trace:configure.ac:2: -1- AC_SUBST_TRACE([prefix]) +m4trace:configure.ac:2: -1- m4_pattern_allow([^prefix$]) +m4trace:configure.ac:2: -1- AC_SUBST([program_transform_name], [s,x,x,]) +m4trace:configure.ac:2: -1- AC_SUBST_TRACE([program_transform_name]) +m4trace:configure.ac:2: -1- m4_pattern_allow([^program_transform_name$]) +m4trace:configure.ac:2: -1- AC_SUBST([bindir], ['${exec_prefix}/bin']) +m4trace:configure.ac:2: -1- AC_SUBST_TRACE([bindir]) +m4trace:configure.ac:2: -1- m4_pattern_allow([^bindir$]) +m4trace:configure.ac:2: -1- AC_SUBST([sbindir], ['${exec_prefix}/sbin']) +m4trace:configure.ac:2: -1- AC_SUBST_TRACE([sbindir]) +m4trace:configure.ac:2: -1- m4_pattern_allow([^sbindir$]) +m4trace:configure.ac:2: -1- AC_SUBST([libexecdir], ['${exec_prefix}/libexec']) +m4trace:configure.ac:2: -1- AC_SUBST_TRACE([libexecdir]) +m4trace:configure.ac:2: -1- m4_pattern_allow([^libexecdir$]) +m4trace:configure.ac:2: -1- AC_SUBST([datarootdir], ['${prefix}/share']) +m4trace:configure.ac:2: -1- AC_SUBST_TRACE([datarootdir]) +m4trace:configure.ac:2: -1- m4_pattern_allow([^datarootdir$]) +m4trace:configure.ac:2: -1- AC_SUBST([datadir], ['${datarootdir}']) +m4trace:configure.ac:2: -1- AC_SUBST_TRACE([datadir]) +m4trace:configure.ac:2: -1- m4_pattern_allow([^datadir$]) +m4trace:configure.ac:2: -1- AC_SUBST([sysconfdir], ['${prefix}/etc']) +m4trace:configure.ac:2: -1- AC_SUBST_TRACE([sysconfdir]) +m4trace:configure.ac:2: -1- m4_pattern_allow([^sysconfdir$]) +m4trace:configure.ac:2: -1- AC_SUBST([sharedstatedir], ['${prefix}/com']) +m4trace:configure.ac:2: -1- AC_SUBST_TRACE([sharedstatedir]) +m4trace:configure.ac:2: -1- m4_pattern_allow([^sharedstatedir$]) +m4trace:configure.ac:2: -1- AC_SUBST([localstatedir], ['${prefix}/var']) +m4trace:configure.ac:2: -1- AC_SUBST_TRACE([localstatedir]) +m4trace:configure.ac:2: -1- m4_pattern_allow([^localstatedir$]) +m4trace:configure.ac:2: -1- AC_SUBST([includedir], ['${prefix}/include']) +m4trace:configure.ac:2: -1- AC_SUBST_TRACE([includedir]) +m4trace:configure.ac:2: -1- m4_pattern_allow([^includedir$]) +m4trace:configure.ac:2: -1- AC_SUBST([oldincludedir], ['/usr/include']) +m4trace:configure.ac:2: -1- AC_SUBST_TRACE([oldincludedir]) +m4trace:configure.ac:2: -1- m4_pattern_allow([^oldincludedir$]) +m4trace:configure.ac:2: -1- AC_SUBST([docdir], [m4_ifset([AC_PACKAGE_TARNAME], + ['${datarootdir}/doc/${PACKAGE_TARNAME}'], + ['${datarootdir}/doc/${PACKAGE}'])]) +m4trace:configure.ac:2: -1- AC_SUBST_TRACE([docdir]) +m4trace:configure.ac:2: -1- m4_pattern_allow([^docdir$]) +m4trace:configure.ac:2: -1- AC_SUBST([infodir], ['${datarootdir}/info']) +m4trace:configure.ac:2: -1- AC_SUBST_TRACE([infodir]) +m4trace:configure.ac:2: -1- m4_pattern_allow([^infodir$]) +m4trace:configure.ac:2: -1- AC_SUBST([htmldir], ['${docdir}']) +m4trace:configure.ac:2: -1- AC_SUBST_TRACE([htmldir]) +m4trace:configure.ac:2: -1- m4_pattern_allow([^htmldir$]) +m4trace:configure.ac:2: -1- AC_SUBST([dvidir], ['${docdir}']) +m4trace:configure.ac:2: -1- AC_SUBST_TRACE([dvidir]) +m4trace:configure.ac:2: -1- m4_pattern_allow([^dvidir$]) +m4trace:configure.ac:2: -1- AC_SUBST([pdfdir], ['${docdir}']) +m4trace:configure.ac:2: -1- AC_SUBST_TRACE([pdfdir]) +m4trace:configure.ac:2: -1- m4_pattern_allow([^pdfdir$]) +m4trace:configure.ac:2: -1- AC_SUBST([psdir], ['${docdir}']) +m4trace:configure.ac:2: -1- AC_SUBST_TRACE([psdir]) +m4trace:configure.ac:2: -1- m4_pattern_allow([^psdir$]) +m4trace:configure.ac:2: -1- AC_SUBST([libdir], ['${exec_prefix}/lib']) +m4trace:configure.ac:2: -1- AC_SUBST_TRACE([libdir]) +m4trace:configure.ac:2: -1- m4_pattern_allow([^libdir$]) +m4trace:configure.ac:2: -1- AC_SUBST([localedir], ['${datarootdir}/locale']) +m4trace:configure.ac:2: -1- AC_SUBST_TRACE([localedir]) +m4trace:configure.ac:2: -1- m4_pattern_allow([^localedir$]) +m4trace:configure.ac:2: -1- AC_SUBST([mandir], ['${datarootdir}/man']) +m4trace:configure.ac:2: -1- AC_SUBST_TRACE([mandir]) +m4trace:configure.ac:2: -1- m4_pattern_allow([^mandir$]) +m4trace:configure.ac:2: -1- AC_DEFINE_TRACE_LITERAL([PACKAGE_NAME]) +m4trace:configure.ac:2: -1- m4_pattern_allow([^PACKAGE_NAME$]) +m4trace:configure.ac:2: -1- AH_OUTPUT([PACKAGE_NAME], [/* Define to the full name of this package. */ +@%:@undef PACKAGE_NAME]) +m4trace:configure.ac:2: -1- AC_DEFINE_TRACE_LITERAL([PACKAGE_TARNAME]) +m4trace:configure.ac:2: -1- m4_pattern_allow([^PACKAGE_TARNAME$]) +m4trace:configure.ac:2: -1- AH_OUTPUT([PACKAGE_TARNAME], [/* Define to the one symbol short name of this package. */ +@%:@undef PACKAGE_TARNAME]) +m4trace:configure.ac:2: -1- AC_DEFINE_TRACE_LITERAL([PACKAGE_VERSION]) +m4trace:configure.ac:2: -1- m4_pattern_allow([^PACKAGE_VERSION$]) +m4trace:configure.ac:2: -1- AH_OUTPUT([PACKAGE_VERSION], [/* Define to the version of this package. */ +@%:@undef PACKAGE_VERSION]) +m4trace:configure.ac:2: -1- AC_DEFINE_TRACE_LITERAL([PACKAGE_STRING]) +m4trace:configure.ac:2: -1- m4_pattern_allow([^PACKAGE_STRING$]) +m4trace:configure.ac:2: -1- AH_OUTPUT([PACKAGE_STRING], [/* Define to the full name and version of this package. */ +@%:@undef PACKAGE_STRING]) +m4trace:configure.ac:2: -1- AC_DEFINE_TRACE_LITERAL([PACKAGE_BUGREPORT]) +m4trace:configure.ac:2: -1- m4_pattern_allow([^PACKAGE_BUGREPORT$]) +m4trace:configure.ac:2: -1- AH_OUTPUT([PACKAGE_BUGREPORT], [/* Define to the address where bug reports for this package should be sent. */ +@%:@undef PACKAGE_BUGREPORT]) +m4trace:configure.ac:2: -1- AC_DEFINE_TRACE_LITERAL([PACKAGE_URL]) +m4trace:configure.ac:2: -1- m4_pattern_allow([^PACKAGE_URL$]) +m4trace:configure.ac:2: -1- AH_OUTPUT([PACKAGE_URL], [/* Define to the home page for this package. */ +@%:@undef PACKAGE_URL]) +m4trace:configure.ac:2: -1- AC_SUBST([DEFS]) +m4trace:configure.ac:2: -1- AC_SUBST_TRACE([DEFS]) +m4trace:configure.ac:2: -1- m4_pattern_allow([^DEFS$]) +m4trace:configure.ac:2: -1- AC_SUBST([ECHO_C]) +m4trace:configure.ac:2: -1- AC_SUBST_TRACE([ECHO_C]) +m4trace:configure.ac:2: -1- m4_pattern_allow([^ECHO_C$]) +m4trace:configure.ac:2: -1- AC_SUBST([ECHO_N]) +m4trace:configure.ac:2: -1- AC_SUBST_TRACE([ECHO_N]) +m4trace:configure.ac:2: -1- m4_pattern_allow([^ECHO_N$]) +m4trace:configure.ac:2: -1- AC_SUBST([ECHO_T]) +m4trace:configure.ac:2: -1- AC_SUBST_TRACE([ECHO_T]) +m4trace:configure.ac:2: -1- m4_pattern_allow([^ECHO_T$]) +m4trace:configure.ac:2: -1- AC_SUBST([LIBS]) +m4trace:configure.ac:2: -1- AC_SUBST_TRACE([LIBS]) +m4trace:configure.ac:2: -1- m4_pattern_allow([^LIBS$]) +m4trace:configure.ac:2: -1- AC_SUBST([build_alias]) +m4trace:configure.ac:2: -1- AC_SUBST_TRACE([build_alias]) +m4trace:configure.ac:2: -1- m4_pattern_allow([^build_alias$]) +m4trace:configure.ac:2: -1- AC_SUBST([host_alias]) +m4trace:configure.ac:2: -1- AC_SUBST_TRACE([host_alias]) +m4trace:configure.ac:2: -1- m4_pattern_allow([^host_alias$]) +m4trace:configure.ac:2: -1- AC_SUBST([target_alias]) +m4trace:configure.ac:2: -1- AC_SUBST_TRACE([target_alias]) +m4trace:configure.ac:2: -1- m4_pattern_allow([^target_alias$]) +m4trace:configure.ac:3: -1- AM_INIT_AUTOMAKE([silent-rules]) +m4trace:configure.ac:3: -1- m4_pattern_allow([^AM_[A-Z]+FLAGS$]) +m4trace:configure.ac:3: -1- AM_AUTOMAKE_VERSION([1.14.1]) +m4trace:configure.ac:3: -1- AC_REQUIRE_AUX_FILE([install-sh]) +m4trace:configure.ac:3: -1- AC_SUBST([INSTALL_PROGRAM]) +m4trace:configure.ac:3: -1- AC_SUBST_TRACE([INSTALL_PROGRAM]) +m4trace:configure.ac:3: -1- m4_pattern_allow([^INSTALL_PROGRAM$]) +m4trace:configure.ac:3: -1- AC_SUBST([INSTALL_SCRIPT]) +m4trace:configure.ac:3: -1- AC_SUBST_TRACE([INSTALL_SCRIPT]) +m4trace:configure.ac:3: -1- m4_pattern_allow([^INSTALL_SCRIPT$]) +m4trace:configure.ac:3: -1- AC_SUBST([INSTALL_DATA]) +m4trace:configure.ac:3: -1- AC_SUBST_TRACE([INSTALL_DATA]) +m4trace:configure.ac:3: -1- m4_pattern_allow([^INSTALL_DATA$]) +m4trace:configure.ac:3: -1- AC_SUBST([am__isrc], [' -I$(srcdir)']) +m4trace:configure.ac:3: -1- AC_SUBST_TRACE([am__isrc]) +m4trace:configure.ac:3: -1- m4_pattern_allow([^am__isrc$]) +m4trace:configure.ac:3: -1- _AM_SUBST_NOTMAKE([am__isrc]) +m4trace:configure.ac:3: -1- AC_SUBST([CYGPATH_W]) +m4trace:configure.ac:3: -1- AC_SUBST_TRACE([CYGPATH_W]) +m4trace:configure.ac:3: -1- m4_pattern_allow([^CYGPATH_W$]) +m4trace:configure.ac:3: -1- AC_SUBST([PACKAGE], ['AC_PACKAGE_TARNAME']) +m4trace:configure.ac:3: -1- AC_SUBST_TRACE([PACKAGE]) +m4trace:configure.ac:3: -1- m4_pattern_allow([^PACKAGE$]) +m4trace:configure.ac:3: -1- AC_SUBST([VERSION], ['AC_PACKAGE_VERSION']) +m4trace:configure.ac:3: -1- AC_SUBST_TRACE([VERSION]) +m4trace:configure.ac:3: -1- m4_pattern_allow([^VERSION$]) +m4trace:configure.ac:3: -1- AC_DEFINE_TRACE_LITERAL([PACKAGE]) +m4trace:configure.ac:3: -1- m4_pattern_allow([^PACKAGE$]) +m4trace:configure.ac:3: -1- AH_OUTPUT([PACKAGE], [/* Name of package */ +@%:@undef PACKAGE]) +m4trace:configure.ac:3: -1- AC_DEFINE_TRACE_LITERAL([VERSION]) +m4trace:configure.ac:3: -1- m4_pattern_allow([^VERSION$]) +m4trace:configure.ac:3: -1- AH_OUTPUT([VERSION], [/* Version number of package */ +@%:@undef VERSION]) +m4trace:configure.ac:3: -1- AC_REQUIRE_AUX_FILE([missing]) +m4trace:configure.ac:3: -1- AC_SUBST([ACLOCAL]) +m4trace:configure.ac:3: -1- AC_SUBST_TRACE([ACLOCAL]) +m4trace:configure.ac:3: -1- m4_pattern_allow([^ACLOCAL$]) +m4trace:configure.ac:3: -1- AC_SUBST([AUTOCONF]) +m4trace:configure.ac:3: -1- AC_SUBST_TRACE([AUTOCONF]) +m4trace:configure.ac:3: -1- m4_pattern_allow([^AUTOCONF$]) +m4trace:configure.ac:3: -1- AC_SUBST([AUTOMAKE]) +m4trace:configure.ac:3: -1- AC_SUBST_TRACE([AUTOMAKE]) +m4trace:configure.ac:3: -1- m4_pattern_allow([^AUTOMAKE$]) +m4trace:configure.ac:3: -1- AC_SUBST([AUTOHEADER]) +m4trace:configure.ac:3: -1- AC_SUBST_TRACE([AUTOHEADER]) +m4trace:configure.ac:3: -1- m4_pattern_allow([^AUTOHEADER$]) +m4trace:configure.ac:3: -1- AC_SUBST([MAKEINFO]) +m4trace:configure.ac:3: -1- AC_SUBST_TRACE([MAKEINFO]) +m4trace:configure.ac:3: -1- m4_pattern_allow([^MAKEINFO$]) +m4trace:configure.ac:3: -1- AC_SUBST([install_sh]) +m4trace:configure.ac:3: -1- AC_SUBST_TRACE([install_sh]) +m4trace:configure.ac:3: -1- m4_pattern_allow([^install_sh$]) +m4trace:configure.ac:3: -1- AC_SUBST([STRIP]) +m4trace:configure.ac:3: -1- AC_SUBST_TRACE([STRIP]) +m4trace:configure.ac:3: -1- m4_pattern_allow([^STRIP$]) +m4trace:configure.ac:3: -1- AC_SUBST([INSTALL_STRIP_PROGRAM]) +m4trace:configure.ac:3: -1- AC_SUBST_TRACE([INSTALL_STRIP_PROGRAM]) +m4trace:configure.ac:3: -1- m4_pattern_allow([^INSTALL_STRIP_PROGRAM$]) +m4trace:configure.ac:3: -1- AC_REQUIRE_AUX_FILE([install-sh]) +m4trace:configure.ac:3: -1- AC_SUBST([MKDIR_P]) +m4trace:configure.ac:3: -1- AC_SUBST_TRACE([MKDIR_P]) +m4trace:configure.ac:3: -1- m4_pattern_allow([^MKDIR_P$]) +m4trace:configure.ac:3: -1- AC_SUBST([mkdir_p], ['$(MKDIR_P)']) +m4trace:configure.ac:3: -1- AC_SUBST_TRACE([mkdir_p]) +m4trace:configure.ac:3: -1- m4_pattern_allow([^mkdir_p$]) +m4trace:configure.ac:3: -1- AC_SUBST([AWK]) +m4trace:configure.ac:3: -1- AC_SUBST_TRACE([AWK]) +m4trace:configure.ac:3: -1- m4_pattern_allow([^AWK$]) +m4trace:configure.ac:3: -1- AC_SUBST([SET_MAKE]) +m4trace:configure.ac:3: -1- AC_SUBST_TRACE([SET_MAKE]) +m4trace:configure.ac:3: -1- m4_pattern_allow([^SET_MAKE$]) +m4trace:configure.ac:3: -1- AC_SUBST([am__leading_dot]) +m4trace:configure.ac:3: -1- AC_SUBST_TRACE([am__leading_dot]) +m4trace:configure.ac:3: -1- m4_pattern_allow([^am__leading_dot$]) +m4trace:configure.ac:3: -1- AC_SUBST([AMTAR], ['$${TAR-tar}']) +m4trace:configure.ac:3: -1- AC_SUBST_TRACE([AMTAR]) +m4trace:configure.ac:3: -1- m4_pattern_allow([^AMTAR$]) +m4trace:configure.ac:3: -1- AC_SUBST([am__tar]) +m4trace:configure.ac:3: -1- AC_SUBST_TRACE([am__tar]) +m4trace:configure.ac:3: -1- m4_pattern_allow([^am__tar$]) +m4trace:configure.ac:3: -1- AC_SUBST([am__untar]) +m4trace:configure.ac:3: -1- AC_SUBST_TRACE([am__untar]) +m4trace:configure.ac:3: -1- m4_pattern_allow([^am__untar$]) +m4trace:configure.ac:3: -1- AM_SILENT_RULES +m4trace:configure.ac:3: -1- AC_SUBST([AM_V]) +m4trace:configure.ac:3: -1- AC_SUBST_TRACE([AM_V]) +m4trace:configure.ac:3: -1- m4_pattern_allow([^AM_V$]) +m4trace:configure.ac:3: -1- _AM_SUBST_NOTMAKE([AM_V]) +m4trace:configure.ac:3: -1- AC_SUBST([AM_DEFAULT_V]) +m4trace:configure.ac:3: -1- AC_SUBST_TRACE([AM_DEFAULT_V]) +m4trace:configure.ac:3: -1- m4_pattern_allow([^AM_DEFAULT_V$]) +m4trace:configure.ac:3: -1- _AM_SUBST_NOTMAKE([AM_DEFAULT_V]) +m4trace:configure.ac:3: -1- AC_SUBST([AM_DEFAULT_VERBOSITY]) +m4trace:configure.ac:3: -1- AC_SUBST_TRACE([AM_DEFAULT_VERBOSITY]) +m4trace:configure.ac:3: -1- m4_pattern_allow([^AM_DEFAULT_VERBOSITY$]) +m4trace:configure.ac:3: -1- AC_SUBST([AM_BACKSLASH]) +m4trace:configure.ac:3: -1- AC_SUBST_TRACE([AM_BACKSLASH]) +m4trace:configure.ac:3: -1- m4_pattern_allow([^AM_BACKSLASH$]) +m4trace:configure.ac:3: -1- _AM_SUBST_NOTMAKE([AM_BACKSLASH]) +m4trace:configure.ac:5: -1- AC_CONFIG_HEADERS([config.h]) +m4trace:configure.ac:8: -1- AC_SUBST([CC]) +m4trace:configure.ac:8: -1- AC_SUBST_TRACE([CC]) +m4trace:configure.ac:8: -1- m4_pattern_allow([^CC$]) +m4trace:configure.ac:8: -1- AC_SUBST([CFLAGS]) +m4trace:configure.ac:8: -1- AC_SUBST_TRACE([CFLAGS]) +m4trace:configure.ac:8: -1- m4_pattern_allow([^CFLAGS$]) +m4trace:configure.ac:8: -1- AC_SUBST([LDFLAGS]) +m4trace:configure.ac:8: -1- AC_SUBST_TRACE([LDFLAGS]) +m4trace:configure.ac:8: -1- m4_pattern_allow([^LDFLAGS$]) +m4trace:configure.ac:8: -1- AC_SUBST([LIBS]) +m4trace:configure.ac:8: -1- AC_SUBST_TRACE([LIBS]) +m4trace:configure.ac:8: -1- m4_pattern_allow([^LIBS$]) +m4trace:configure.ac:8: -1- AC_SUBST([CPPFLAGS]) +m4trace:configure.ac:8: -1- AC_SUBST_TRACE([CPPFLAGS]) +m4trace:configure.ac:8: -1- m4_pattern_allow([^CPPFLAGS$]) +m4trace:configure.ac:8: -1- AC_SUBST([CC]) +m4trace:configure.ac:8: -1- AC_SUBST_TRACE([CC]) +m4trace:configure.ac:8: -1- m4_pattern_allow([^CC$]) +m4trace:configure.ac:8: -1- AC_SUBST([CC]) +m4trace:configure.ac:8: -1- AC_SUBST_TRACE([CC]) +m4trace:configure.ac:8: -1- m4_pattern_allow([^CC$]) +m4trace:configure.ac:8: -1- AC_SUBST([CC]) +m4trace:configure.ac:8: -1- AC_SUBST_TRACE([CC]) +m4trace:configure.ac:8: -1- m4_pattern_allow([^CC$]) +m4trace:configure.ac:8: -1- AC_SUBST([CC]) +m4trace:configure.ac:8: -1- AC_SUBST_TRACE([CC]) +m4trace:configure.ac:8: -1- m4_pattern_allow([^CC$]) +m4trace:configure.ac:8: -1- AC_SUBST([ac_ct_CC]) +m4trace:configure.ac:8: -1- AC_SUBST_TRACE([ac_ct_CC]) +m4trace:configure.ac:8: -1- m4_pattern_allow([^ac_ct_CC$]) +m4trace:configure.ac:8: -1- AC_SUBST([EXEEXT], [$ac_cv_exeext]) +m4trace:configure.ac:8: -1- AC_SUBST_TRACE([EXEEXT]) +m4trace:configure.ac:8: -1- m4_pattern_allow([^EXEEXT$]) +m4trace:configure.ac:8: -1- AC_SUBST([OBJEXT], [$ac_cv_objext]) +m4trace:configure.ac:8: -1- AC_SUBST_TRACE([OBJEXT]) +m4trace:configure.ac:8: -1- m4_pattern_allow([^OBJEXT$]) +m4trace:configure.ac:8: -1- AC_REQUIRE_AUX_FILE([compile]) +m4trace:configure.ac:8: -1- AC_SUBST([DEPDIR], ["${am__leading_dot}deps"]) +m4trace:configure.ac:8: -1- AC_SUBST_TRACE([DEPDIR]) +m4trace:configure.ac:8: -1- m4_pattern_allow([^DEPDIR$]) +m4trace:configure.ac:8: -1- AC_SUBST([am__include]) +m4trace:configure.ac:8: -1- AC_SUBST_TRACE([am__include]) +m4trace:configure.ac:8: -1- m4_pattern_allow([^am__include$]) +m4trace:configure.ac:8: -1- AC_SUBST([am__quote]) +m4trace:configure.ac:8: -1- AC_SUBST_TRACE([am__quote]) +m4trace:configure.ac:8: -1- m4_pattern_allow([^am__quote$]) +m4trace:configure.ac:8: -1- AM_CONDITIONAL([AMDEP], [test "x$enable_dependency_tracking" != xno]) +m4trace:configure.ac:8: -1- AC_SUBST([AMDEP_TRUE]) +m4trace:configure.ac:8: -1- AC_SUBST_TRACE([AMDEP_TRUE]) +m4trace:configure.ac:8: -1- m4_pattern_allow([^AMDEP_TRUE$]) +m4trace:configure.ac:8: -1- AC_SUBST([AMDEP_FALSE]) +m4trace:configure.ac:8: -1- AC_SUBST_TRACE([AMDEP_FALSE]) +m4trace:configure.ac:8: -1- m4_pattern_allow([^AMDEP_FALSE$]) +m4trace:configure.ac:8: -1- _AM_SUBST_NOTMAKE([AMDEP_TRUE]) +m4trace:configure.ac:8: -1- _AM_SUBST_NOTMAKE([AMDEP_FALSE]) +m4trace:configure.ac:8: -1- AC_SUBST([AMDEPBACKSLASH]) +m4trace:configure.ac:8: -1- AC_SUBST_TRACE([AMDEPBACKSLASH]) +m4trace:configure.ac:8: -1- m4_pattern_allow([^AMDEPBACKSLASH$]) +m4trace:configure.ac:8: -1- _AM_SUBST_NOTMAKE([AMDEPBACKSLASH]) +m4trace:configure.ac:8: -1- AC_SUBST([am__nodep]) +m4trace:configure.ac:8: -1- AC_SUBST_TRACE([am__nodep]) +m4trace:configure.ac:8: -1- m4_pattern_allow([^am__nodep$]) +m4trace:configure.ac:8: -1- _AM_SUBST_NOTMAKE([am__nodep]) +m4trace:configure.ac:8: -1- AC_SUBST([CCDEPMODE], [depmode=$am_cv_CC_dependencies_compiler_type]) +m4trace:configure.ac:8: -1- AC_SUBST_TRACE([CCDEPMODE]) +m4trace:configure.ac:8: -1- m4_pattern_allow([^CCDEPMODE$]) +m4trace:configure.ac:8: -1- AM_CONDITIONAL([am__fastdepCC], [ + test "x$enable_dependency_tracking" != xno \ + && test "$am_cv_CC_dependencies_compiler_type" = gcc3]) +m4trace:configure.ac:8: -1- AC_SUBST([am__fastdepCC_TRUE]) +m4trace:configure.ac:8: -1- AC_SUBST_TRACE([am__fastdepCC_TRUE]) +m4trace:configure.ac:8: -1- m4_pattern_allow([^am__fastdepCC_TRUE$]) +m4trace:configure.ac:8: -1- AC_SUBST([am__fastdepCC_FALSE]) +m4trace:configure.ac:8: -1- AC_SUBST_TRACE([am__fastdepCC_FALSE]) +m4trace:configure.ac:8: -1- m4_pattern_allow([^am__fastdepCC_FALSE$]) +m4trace:configure.ac:8: -1- _AM_SUBST_NOTMAKE([am__fastdepCC_TRUE]) +m4trace:configure.ac:8: -1- _AM_SUBST_NOTMAKE([am__fastdepCC_FALSE]) +m4trace:configure.ac:10: -1- AM_PROG_CC_C_O +m4trace:configure.ac:20: -1- AC_CONFIG_FILES([Makefile]) +m4trace:configure.ac:21: -1- AC_SUBST([LIB@&t@OBJS], [$ac_libobjs]) +m4trace:configure.ac:21: -1- AC_SUBST_TRACE([LIB@&t@OBJS]) +m4trace:configure.ac:21: -1- m4_pattern_allow([^LIB@&t@OBJS$]) +m4trace:configure.ac:21: -1- AC_SUBST([LTLIBOBJS], [$ac_ltlibobjs]) +m4trace:configure.ac:21: -1- AC_SUBST_TRACE([LTLIBOBJS]) +m4trace:configure.ac:21: -1- m4_pattern_allow([^LTLIBOBJS$]) +m4trace:configure.ac:21: -1- AM_CONDITIONAL([am__EXEEXT], [test -n "$EXEEXT"]) +m4trace:configure.ac:21: -1- AC_SUBST([am__EXEEXT_TRUE]) +m4trace:configure.ac:21: -1- AC_SUBST_TRACE([am__EXEEXT_TRUE]) +m4trace:configure.ac:21: -1- m4_pattern_allow([^am__EXEEXT_TRUE$]) +m4trace:configure.ac:21: -1- AC_SUBST([am__EXEEXT_FALSE]) +m4trace:configure.ac:21: -1- AC_SUBST_TRACE([am__EXEEXT_FALSE]) +m4trace:configure.ac:21: -1- m4_pattern_allow([^am__EXEEXT_FALSE$]) +m4trace:configure.ac:21: -1- _AM_SUBST_NOTMAKE([am__EXEEXT_TRUE]) +m4trace:configure.ac:21: -1- _AM_SUBST_NOTMAKE([am__EXEEXT_FALSE]) +m4trace:configure.ac:21: -1- AC_SUBST_TRACE([top_builddir]) +m4trace:configure.ac:21: -1- AC_SUBST_TRACE([top_build_prefix]) +m4trace:configure.ac:21: -1- AC_SUBST_TRACE([srcdir]) +m4trace:configure.ac:21: -1- AC_SUBST_TRACE([abs_srcdir]) +m4trace:configure.ac:21: -1- AC_SUBST_TRACE([top_srcdir]) +m4trace:configure.ac:21: -1- AC_SUBST_TRACE([abs_top_srcdir]) +m4trace:configure.ac:21: -1- AC_SUBST_TRACE([builddir]) +m4trace:configure.ac:21: -1- AC_SUBST_TRACE([abs_builddir]) +m4trace:configure.ac:21: -1- AC_SUBST_TRACE([abs_top_builddir]) +m4trace:configure.ac:21: -1- AC_SUBST_TRACE([INSTALL]) +m4trace:configure.ac:21: -1- AC_SUBST_TRACE([MKDIR_P]) diff --git a/examples/yocto/meta-mini/recipes-hello/autohello/files/autohello/compile b/examples/yocto/meta-mini/recipes-hello/autohello/files/autohello/compile new file mode 120000 index 0000000..d3164c8 --- /dev/null +++ b/examples/yocto/meta-mini/recipes-hello/autohello/files/autohello/compile @@ -0,0 +1 @@ +/usr/share/automake-1.14/compile \ No newline at end of file diff --git a/examples/yocto/meta-mini/recipes-hello/autohello/files/autohello/config.h b/examples/yocto/meta-mini/recipes-hello/autohello/files/autohello/config.h new file mode 100644 index 0000000..8393208 --- /dev/null +++ b/examples/yocto/meta-mini/recipes-hello/autohello/files/autohello/config.h @@ -0,0 +1,26 @@ +/* config.h. Generated from config.h.in by configure. */ +/* config.h.in. Generated from configure.ac by autoheader. */ + +/* Name of package */ +#define PACKAGE "autohello" + +/* Define to the address where bug reports for this package should be sent. */ +#define PACKAGE_BUGREPORT "maunt@linutronix.de" + +/* Define to the full name of this package. */ +#define PACKAGE_NAME "autohello" + +/* Define to the full name and version of this package. */ +#define PACKAGE_STRING "autohello 1.1" + +/* Define to the one symbol short name of this package. */ +#define PACKAGE_TARNAME "autohello" + +/* Define to the home page for this package. */ +#define PACKAGE_URL "" + +/* Define to the version of this package. */ +#define PACKAGE_VERSION "1.1" + +/* Version number of package */ +#define VERSION "1.1" diff --git a/examples/yocto/meta-mini/recipes-hello/autohello/files/autohello/config.h.in b/examples/yocto/meta-mini/recipes-hello/autohello/files/autohello/config.h.in new file mode 100644 index 0000000..dd3b02c --- /dev/null +++ b/examples/yocto/meta-mini/recipes-hello/autohello/files/autohello/config.h.in @@ -0,0 +1,25 @@ +/* config.h.in. Generated from configure.ac by autoheader. */ + +/* Name of package */ +#undef PACKAGE + +/* Define to the address where bug reports for this package should be sent. */ +#undef PACKAGE_BUGREPORT + +/* Define to the full name of this package. */ +#undef PACKAGE_NAME + +/* Define to the full name and version of this package. */ +#undef PACKAGE_STRING + +/* Define to the one symbol short name of this package. */ +#undef PACKAGE_TARNAME + +/* Define to the home page for this package. */ +#undef PACKAGE_URL + +/* Define to the version of this package. */ +#undef PACKAGE_VERSION + +/* Version number of package */ +#undef VERSION diff --git a/examples/yocto/meta-mini/recipes-hello/autohello/files/autohello/config.status b/examples/yocto/meta-mini/recipes-hello/autohello/files/autohello/config.status new file mode 100755 index 0000000..8efae30 --- /dev/null +++ b/examples/yocto/meta-mini/recipes-hello/autohello/files/autohello/config.status @@ -0,0 +1,1173 @@ +#! /bin/bash +# Generated by configure. +# Run this file to recreate the current configuration. +# Compiler output produced by configure, useful for debugging +# configure, is in config.log if it exists. + +debug=false +ac_cs_recheck=false +ac_cs_silent=false + +SHELL=${CONFIG_SHELL-/bin/bash} +export SHELL +## -------------------- ## +## M4sh Initialization. ## +## -------------------- ## + +# Be more Bourne compatible +DUALCASE=1; export DUALCASE # for MKS sh +if test -n "${ZSH_VERSION+set}" && (emulate sh) >/dev/null 2>&1; then : + emulate sh + NULLCMD=: + # Pre-4.2 versions of Zsh do word splitting on ${1+"$@"}, which + # is contrary to our usage. Disable this feature. + alias -g '${1+"$@"}'='"$@"' + setopt NO_GLOB_SUBST +else + case `(set -o) 2>/dev/null` in #( + *posix*) : + set -o posix ;; #( + *) : + ;; +esac +fi + + +as_nl=' +' +export as_nl +# Printing a long string crashes Solaris 7 /usr/bin/printf. +as_echo='\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\' +as_echo=$as_echo$as_echo$as_echo$as_echo$as_echo +as_echo=$as_echo$as_echo$as_echo$as_echo$as_echo$as_echo +# Prefer a ksh shell builtin over an external printf program on Solaris, +# but without wasting forks for bash or zsh. +if test -z "$BASH_VERSION$ZSH_VERSION" \ + && (test "X`print -r -- $as_echo`" = "X$as_echo") 2>/dev/null; then + as_echo='print -r --' + as_echo_n='print -rn --' +elif (test "X`printf %s $as_echo`" = "X$as_echo") 2>/dev/null; then + as_echo='printf %s\n' + as_echo_n='printf %s' +else + if test "X`(/usr/ucb/echo -n -n $as_echo) 2>/dev/null`" = "X-n $as_echo"; then + as_echo_body='eval /usr/ucb/echo -n "$1$as_nl"' + as_echo_n='/usr/ucb/echo -n' + else + as_echo_body='eval expr "X$1" : "X\\(.*\\)"' + as_echo_n_body='eval + arg=$1; + case $arg in #( + *"$as_nl"*) + expr "X$arg" : "X\\(.*\\)$as_nl"; + arg=`expr "X$arg" : ".*$as_nl\\(.*\\)"`;; + esac; + expr "X$arg" : "X\\(.*\\)" | tr -d "$as_nl" + ' + export as_echo_n_body + as_echo_n='sh -c $as_echo_n_body as_echo' + fi + export as_echo_body + as_echo='sh -c $as_echo_body as_echo' +fi + +# The user is always right. +if test "${PATH_SEPARATOR+set}" != set; then + PATH_SEPARATOR=: + (PATH='/bin;/bin'; FPATH=$PATH; sh -c :) >/dev/null 2>&1 && { + (PATH='/bin:/bin'; FPATH=$PATH; sh -c :) >/dev/null 2>&1 || + PATH_SEPARATOR=';' + } +fi + + +# IFS +# We need space, tab and new line, in precisely that order. Quoting is +# there to prevent editors from complaining about space-tab. +# (If _AS_PATH_WALK were called with IFS unset, it would disable word +# splitting by setting IFS to empty value.) +IFS=" "" $as_nl" + +# Find who we are. Look in the path if we contain no directory separator. +as_myself= +case $0 in #(( + *[\\/]* ) as_myself=$0 ;; + *) as_save_IFS=$IFS; IFS=$PATH_SEPARATOR +for as_dir in $PATH +do + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. + test -r "$as_dir/$0" && as_myself=$as_dir/$0 && break + done +IFS=$as_save_IFS + + ;; +esac +# We did not find ourselves, most probably we were run as `sh COMMAND' +# in which case we are not to be found in the path. +if test "x$as_myself" = x; then + as_myself=$0 +fi +if test ! -f "$as_myself"; then + $as_echo "$as_myself: error: cannot find myself; rerun with an absolute file name" >&2 + exit 1 +fi + +# Unset variables that we do not need and which cause bugs (e.g. in +# pre-3.0 UWIN ksh). But do not cause bugs in bash 2.01; the "|| exit 1" +# suppresses any "Segmentation fault" message there. '((' could +# trigger a bug in pdksh 5.2.14. +for as_var in BASH_ENV ENV MAIL MAILPATH +do eval test x\${$as_var+set} = xset \ + && ( (unset $as_var) || exit 1) >/dev/null 2>&1 && unset $as_var || : +done +PS1='$ ' +PS2='> ' +PS4='+ ' + +# NLS nuisances. +LC_ALL=C +export LC_ALL +LANGUAGE=C +export LANGUAGE + +# CDPATH. +(unset CDPATH) >/dev/null 2>&1 && unset CDPATH + + +# as_fn_error STATUS ERROR [LINENO LOG_FD] +# ---------------------------------------- +# Output "`basename $0`: error: ERROR" to stderr. If LINENO and LOG_FD are +# provided, also output the error to LOG_FD, referencing LINENO. Then exit the +# script with STATUS, using 1 if that was 0. +as_fn_error () +{ + as_status=$1; test $as_status -eq 0 && as_status=1 + if test "$4"; then + as_lineno=${as_lineno-"$3"} as_lineno_stack=as_lineno_stack=$as_lineno_stack + $as_echo "$as_me:${as_lineno-$LINENO}: error: $2" >&$4 + fi + $as_echo "$as_me: error: $2" >&2 + as_fn_exit $as_status +} # as_fn_error + + +# as_fn_set_status STATUS +# ----------------------- +# Set $? to STATUS, without forking. +as_fn_set_status () +{ + return $1 +} # as_fn_set_status + +# as_fn_exit STATUS +# ----------------- +# Exit the shell with STATUS, even in a "trap 0" or "set -e" context. +as_fn_exit () +{ + set +e + as_fn_set_status $1 + exit $1 +} # as_fn_exit + +# as_fn_unset VAR +# --------------- +# Portably unset VAR. +as_fn_unset () +{ + { eval $1=; unset $1;} +} +as_unset=as_fn_unset +# as_fn_append VAR VALUE +# ---------------------- +# Append the text in VALUE to the end of the definition contained in VAR. Take +# advantage of any shell optimizations that allow amortized linear growth over +# repeated appends, instead of the typical quadratic growth present in naive +# implementations. +if (eval "as_var=1; as_var+=2; test x\$as_var = x12") 2>/dev/null; then : + eval 'as_fn_append () + { + eval $1+=\$2 + }' +else + as_fn_append () + { + eval $1=\$$1\$2 + } +fi # as_fn_append + +# as_fn_arith ARG... +# ------------------ +# Perform arithmetic evaluation on the ARGs, and store the result in the +# global $as_val. Take advantage of shells that can avoid forks. The arguments +# must be portable across $(()) and expr. +if (eval "test \$(( 1 + 1 )) = 2") 2>/dev/null; then : + eval 'as_fn_arith () + { + as_val=$(( $* )) + }' +else + as_fn_arith () + { + as_val=`expr "$@" || test $? -eq 1` + } +fi # as_fn_arith + + +if expr a : '\(a\)' >/dev/null 2>&1 && + test "X`expr 00001 : '.*\(...\)'`" = X001; then + as_expr=expr +else + as_expr=false +fi + +if (basename -- /) >/dev/null 2>&1 && test "X`basename -- / 2>&1`" = "X/"; then + as_basename=basename +else + as_basename=false +fi + +if (as_dir=`dirname -- /` && test "X$as_dir" = X/) >/dev/null 2>&1; then + as_dirname=dirname +else + as_dirname=false +fi + +as_me=`$as_basename -- "$0" || +$as_expr X/"$0" : '.*/\([^/][^/]*\)/*$' \| \ + X"$0" : 'X\(//\)$' \| \ + X"$0" : 'X\(/\)' \| . 2>/dev/null || +$as_echo X/"$0" | + sed '/^.*\/\([^/][^/]*\)\/*$/{ + s//\1/ + q + } + /^X\/\(\/\/\)$/{ + s//\1/ + q + } + /^X\/\(\/\).*/{ + s//\1/ + q + } + s/.*/./; q'` + +# Avoid depending upon Character Ranges. +as_cr_letters='abcdefghijklmnopqrstuvwxyz' +as_cr_LETTERS='ABCDEFGHIJKLMNOPQRSTUVWXYZ' +as_cr_Letters=$as_cr_letters$as_cr_LETTERS +as_cr_digits='0123456789' +as_cr_alnum=$as_cr_Letters$as_cr_digits + +ECHO_C= ECHO_N= ECHO_T= +case `echo -n x` in #((((( +-n*) + case `echo 'xy\c'` in + *c*) ECHO_T=' ';; # ECHO_T is single tab character. + xy) ECHO_C='\c';; + *) echo `echo ksh88 bug on AIX 6.1` > /dev/null + ECHO_T=' ';; + esac;; +*) + ECHO_N='-n';; +esac + +rm -f conf$$ conf$$.exe conf$$.file +if test -d conf$$.dir; then + rm -f conf$$.dir/conf$$.file +else + rm -f conf$$.dir + mkdir conf$$.dir 2>/dev/null +fi +if (echo >conf$$.file) 2>/dev/null; then + if ln -s conf$$.file conf$$ 2>/dev/null; then + as_ln_s='ln -s' + # ... but there are two gotchas: + # 1) On MSYS, both `ln -s file dir' and `ln file dir' fail. + # 2) DJGPP < 2.04 has no symlinks; `ln -s' creates a wrapper executable. + # In both cases, we have to default to `cp -pR'. + ln -s conf$$.file conf$$.dir 2>/dev/null && test ! -f conf$$.exe || + as_ln_s='cp -pR' + elif ln conf$$.file conf$$ 2>/dev/null; then + as_ln_s=ln + else + as_ln_s='cp -pR' + fi +else + as_ln_s='cp -pR' +fi +rm -f conf$$ conf$$.exe conf$$.dir/conf$$.file conf$$.file +rmdir conf$$.dir 2>/dev/null + + +# as_fn_mkdir_p +# ------------- +# Create "$as_dir" as a directory, including parents if necessary. +as_fn_mkdir_p () +{ + + case $as_dir in #( + -*) as_dir=./$as_dir;; + esac + test -d "$as_dir" || eval $as_mkdir_p || { + as_dirs= + while :; do + case $as_dir in #( + *\'*) as_qdir=`$as_echo "$as_dir" | sed "s/'/'\\\\\\\\''/g"`;; #'( + *) as_qdir=$as_dir;; + esac + as_dirs="'$as_qdir' $as_dirs" + as_dir=`$as_dirname -- "$as_dir" || +$as_expr X"$as_dir" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \ + X"$as_dir" : 'X\(//\)[^/]' \| \ + X"$as_dir" : 'X\(//\)$' \| \ + X"$as_dir" : 'X\(/\)' \| . 2>/dev/null || +$as_echo X"$as_dir" | + sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ + s//\1/ + q + } + /^X\(\/\/\)[^/].*/{ + s//\1/ + q + } + /^X\(\/\/\)$/{ + s//\1/ + q + } + /^X\(\/\).*/{ + s//\1/ + q + } + s/.*/./; q'` + test -d "$as_dir" && break + done + test -z "$as_dirs" || eval "mkdir $as_dirs" + } || test -d "$as_dir" || as_fn_error $? "cannot create directory $as_dir" + + +} # as_fn_mkdir_p +if mkdir -p . 2>/dev/null; then + as_mkdir_p='mkdir -p "$as_dir"' +else + test -d ./-p && rmdir ./-p + as_mkdir_p=false +fi + + +# as_fn_executable_p FILE +# ----------------------- +# Test if FILE is an executable regular file. +as_fn_executable_p () +{ + test -f "$1" && test -x "$1" +} # as_fn_executable_p +as_test_x='test -x' +as_executable_p=as_fn_executable_p + +# Sed expression to map a string onto a valid CPP name. +as_tr_cpp="eval sed 'y%*$as_cr_letters%P$as_cr_LETTERS%;s%[^_$as_cr_alnum]%_%g'" + +# Sed expression to map a string onto a valid variable name. +as_tr_sh="eval sed 'y%*+%pp%;s%[^_$as_cr_alnum]%_%g'" + + +exec 6>&1 +## ----------------------------------- ## +## Main body of $CONFIG_STATUS script. ## +## ----------------------------------- ## +# Save the log message, to keep $0 and so on meaningful, and to +# report actual input values of CONFIG_FILES etc. instead of their +# values after options handling. +ac_log=" +This file was extended by autohello $as_me 1.1, which was +generated by GNU Autoconf 2.69. Invocation command line was + + CONFIG_FILES = $CONFIG_FILES + CONFIG_HEADERS = $CONFIG_HEADERS + CONFIG_LINKS = $CONFIG_LINKS + CONFIG_COMMANDS = $CONFIG_COMMANDS + $ $0 $@ + +on `(hostname || uname -n) 2>/dev/null | sed 1q` +" + +# Files that config.status was made for. +config_files=" Makefile" +config_headers=" config.h" +config_commands=" depfiles" + +ac_cs_usage="\ +\`$as_me' instantiates files and other configuration actions +from templates according to the current configuration. Unless the files +and actions are specified as TAGs, all are instantiated by default. + +Usage: $0 [OPTION]... [TAG]... + + -h, --help print this help, then exit + -V, --version print version number and configuration settings, then exit + --config print configuration, then exit + -q, --quiet, --silent + do not print progress messages + -d, --debug don't remove temporary files + --recheck update $as_me by reconfiguring in the same conditions + --file=FILE[:TEMPLATE] + instantiate the configuration file FILE + --header=FILE[:TEMPLATE] + instantiate the configuration header FILE + +Configuration files: +$config_files + +Configuration headers: +$config_headers + +Configuration commands: +$config_commands + +Report bugs to ." + +ac_cs_config="" +ac_cs_version="\ +autohello config.status 1.1 +configured by ./configure, generated by GNU Autoconf 2.69, + with options \"$ac_cs_config\" + +Copyright (C) 2012 Free Software Foundation, Inc. +This config.status script is free software; the Free Software Foundation +gives unlimited permission to copy, distribute and modify it." + +ac_pwd='/home/local/src/poky/meta-linutronix/recipes-hello/autohello/files/autohello' +srcdir='.' +INSTALL='/usr/bin/install -c' +MKDIR_P='/bin/mkdir -p' +AWK='gawk' +test -n "$AWK" || AWK=awk +# The default lists apply if the user does not specify any file. +ac_need_defaults=: +while test $# != 0 +do + case $1 in + --*=?*) + ac_option=`expr "X$1" : 'X\([^=]*\)='` + ac_optarg=`expr "X$1" : 'X[^=]*=\(.*\)'` + ac_shift=: + ;; + --*=) + ac_option=`expr "X$1" : 'X\([^=]*\)='` + ac_optarg= + ac_shift=: + ;; + *) + ac_option=$1 + ac_optarg=$2 + ac_shift=shift + ;; + esac + + case $ac_option in + # Handling of the options. + -recheck | --recheck | --rechec | --reche | --rech | --rec | --re | --r) + ac_cs_recheck=: ;; + --version | --versio | --versi | --vers | --ver | --ve | --v | -V ) + $as_echo "$ac_cs_version"; exit ;; + --config | --confi | --conf | --con | --co | --c ) + $as_echo "$ac_cs_config"; exit ;; + --debug | --debu | --deb | --de | --d | -d ) + debug=: ;; + --file | --fil | --fi | --f ) + $ac_shift + case $ac_optarg in + *\'*) ac_optarg=`$as_echo "$ac_optarg" | sed "s/'/'\\\\\\\\''/g"` ;; + '') as_fn_error $? "missing file argument" ;; + esac + as_fn_append CONFIG_FILES " '$ac_optarg'" + ac_need_defaults=false;; + --header | --heade | --head | --hea ) + $ac_shift + case $ac_optarg in + *\'*) ac_optarg=`$as_echo "$ac_optarg" | sed "s/'/'\\\\\\\\''/g"` ;; + esac + as_fn_append CONFIG_HEADERS " '$ac_optarg'" + ac_need_defaults=false;; + --he | --h) + # Conflict between --help and --header + as_fn_error $? "ambiguous option: \`$1' +Try \`$0 --help' for more information.";; + --help | --hel | -h ) + $as_echo "$ac_cs_usage"; exit ;; + -q | -quiet | --quiet | --quie | --qui | --qu | --q \ + | -silent | --silent | --silen | --sile | --sil | --si | --s) + ac_cs_silent=: ;; + + # This is an error. + -*) as_fn_error $? "unrecognized option: \`$1' +Try \`$0 --help' for more information." ;; + + *) as_fn_append ac_config_targets " $1" + ac_need_defaults=false ;; + + esac + shift +done + +ac_configure_extra_args= + +if $ac_cs_silent; then + exec 6>/dev/null + ac_configure_extra_args="$ac_configure_extra_args --silent" +fi + +if $ac_cs_recheck; then + set X /bin/bash './configure' $ac_configure_extra_args --no-create --no-recursion + shift + $as_echo "running CONFIG_SHELL=/bin/bash $*" >&6 + CONFIG_SHELL='/bin/bash' + export CONFIG_SHELL + exec "$@" +fi + +exec 5>>config.log +{ + echo + sed 'h;s/./-/g;s/^.../## /;s/...$/ ##/;p;x;p;x' <<_ASBOX +## Running $as_me. ## +_ASBOX + $as_echo "$ac_log" +} >&5 + +# +# INIT-COMMANDS +# +AMDEP_TRUE="" ac_aux_dir="." + + +# Handling of arguments. +for ac_config_target in $ac_config_targets +do + case $ac_config_target in + "config.h") CONFIG_HEADERS="$CONFIG_HEADERS config.h" ;; + "depfiles") CONFIG_COMMANDS="$CONFIG_COMMANDS depfiles" ;; + "Makefile") CONFIG_FILES="$CONFIG_FILES Makefile" ;; + + *) as_fn_error $? "invalid argument: \`$ac_config_target'" "$LINENO" 5;; + esac +done + + +# If the user did not use the arguments to specify the items to instantiate, +# then the envvar interface is used. Set only those that are not. +# We use the long form for the default assignment because of an extremely +# bizarre bug on SunOS 4.1.3. +if $ac_need_defaults; then + test "${CONFIG_FILES+set}" = set || CONFIG_FILES=$config_files + test "${CONFIG_HEADERS+set}" = set || CONFIG_HEADERS=$config_headers + test "${CONFIG_COMMANDS+set}" = set || CONFIG_COMMANDS=$config_commands +fi + +# Have a temporary directory for convenience. Make it in the build tree +# simply because there is no reason against having it here, and in addition, +# creating and moving files from /tmp can sometimes cause problems. +# Hook for its removal unless debugging. +# Note that there is a small window in which the directory will not be cleaned: +# after its creation but before its name has been assigned to `$tmp'. +$debug || +{ + tmp= ac_tmp= + trap 'exit_status=$? + : "${ac_tmp:=$tmp}" + { test ! -d "$ac_tmp" || rm -fr "$ac_tmp"; } && exit $exit_status +' 0 + trap 'as_fn_exit 1' 1 2 13 15 +} +# Create a (secure) tmp directory for tmp files. + +{ + tmp=`(umask 077 && mktemp -d "./confXXXXXX") 2>/dev/null` && + test -d "$tmp" +} || +{ + tmp=./conf$$-$RANDOM + (umask 077 && mkdir "$tmp") +} || as_fn_error $? "cannot create a temporary directory in ." "$LINENO" 5 +ac_tmp=$tmp + +# Set up the scripts for CONFIG_FILES section. +# No need to generate them if there are no CONFIG_FILES. +# This happens for instance with `./config.status config.h'. +if test -n "$CONFIG_FILES"; then + + +ac_cr=`echo X | tr X '\015'` +# On cygwin, bash can eat \r inside `` if the user requested igncr. +# But we know of no other shell where ac_cr would be empty at this +# point, so we can use a bashism as a fallback. +if test "x$ac_cr" = x; then + eval ac_cr=\$\'\\r\' +fi +ac_cs_awk_cr=`$AWK 'BEGIN { print "a\rb" }' /dev/null` +if test "$ac_cs_awk_cr" = "a${ac_cr}b"; then + ac_cs_awk_cr='\\r' +else + ac_cs_awk_cr=$ac_cr +fi + +echo 'BEGIN {' >"$ac_tmp/subs1.awk" && +cat >>"$ac_tmp/subs1.awk" <<\_ACAWK && +S["am__EXEEXT_FALSE"]="" +S["am__EXEEXT_TRUE"]="#" +S["LTLIBOBJS"]="" +S["LIBOBJS"]="" +S["am__fastdepCC_FALSE"]="#" +S["am__fastdepCC_TRUE"]="" +S["CCDEPMODE"]="depmode=gcc3" +S["am__nodep"]="_no" +S["AMDEPBACKSLASH"]="\\" +S["AMDEP_FALSE"]="#" +S["AMDEP_TRUE"]="" +S["am__quote"]="" +S["am__include"]="include" +S["DEPDIR"]=".deps" +S["OBJEXT"]="o" +S["EXEEXT"]="" +S["ac_ct_CC"]="gcc" +S["CPPFLAGS"]="" +S["LDFLAGS"]="" +S["CFLAGS"]="-g -O2" +S["CC"]="gcc" +S["AM_BACKSLASH"]="\\" +S["AM_DEFAULT_VERBOSITY"]="1" +S["AM_DEFAULT_V"]="$(AM_DEFAULT_VERBOSITY)" +S["AM_V"]="$(V)" +S["am__untar"]="$${TAR-tar} xf -" +S["am__tar"]="$${TAR-tar} chof - \"$$tardir\"" +S["AMTAR"]="$${TAR-tar}" +S["am__leading_dot"]="." +S["SET_MAKE"]="" +S["AWK"]="gawk" +S["mkdir_p"]="$(MKDIR_P)" +S["MKDIR_P"]="/bin/mkdir -p" +S["INSTALL_STRIP_PROGRAM"]="$(install_sh) -c -s" +S["STRIP"]="" +S["install_sh"]="${SHELL} /home/local/src/poky/meta-linutronix/recipes-hello/autohello/files/autohello/install-sh" +S["MAKEINFO"]="${SHELL} /home/local/src/poky/meta-linutronix/recipes-hello/autohello/files/autohello/missing makeinfo" +S["AUTOHEADER"]="${SHELL} /home/local/src/poky/meta-linutronix/recipes-hello/autohello/files/autohello/missing autoheader" +S["AUTOMAKE"]="${SHELL} /home/local/src/poky/meta-linutronix/recipes-hello/autohello/files/autohello/missing automake-1.14" +S["AUTOCONF"]="${SHELL} /home/local/src/poky/meta-linutronix/recipes-hello/autohello/files/autohello/missing autoconf" +S["ACLOCAL"]="${SHELL} /home/local/src/poky/meta-linutronix/recipes-hello/autohello/files/autohello/missing aclocal-1.14" +S["VERSION"]="1.1" +S["PACKAGE"]="autohello" +S["CYGPATH_W"]="echo" +S["am__isrc"]="" +S["INSTALL_DATA"]="${INSTALL} -m 644" +S["INSTALL_SCRIPT"]="${INSTALL}" +S["INSTALL_PROGRAM"]="${INSTALL}" +S["target_alias"]="" +S["host_alias"]="" +S["build_alias"]="" +S["LIBS"]="" +S["ECHO_T"]="" +S["ECHO_N"]="-n" +S["ECHO_C"]="" +S["DEFS"]="-DHAVE_CONFIG_H" +S["mandir"]="${datarootdir}/man" +S["localedir"]="${datarootdir}/locale" +S["libdir"]="${exec_prefix}/lib" +S["psdir"]="${docdir}" +S["pdfdir"]="${docdir}" +S["dvidir"]="${docdir}" +S["htmldir"]="${docdir}" +S["infodir"]="${datarootdir}/info" +S["docdir"]="${datarootdir}/doc/${PACKAGE_TARNAME}" +S["oldincludedir"]="/usr/include" +S["includedir"]="${prefix}/include" +S["localstatedir"]="${prefix}/var" +S["sharedstatedir"]="${prefix}/com" +S["sysconfdir"]="${prefix}/etc" +S["datadir"]="${datarootdir}" +S["datarootdir"]="${prefix}/share" +S["libexecdir"]="${exec_prefix}/libexec" +S["sbindir"]="${exec_prefix}/sbin" +S["bindir"]="${exec_prefix}/bin" +S["program_transform_name"]="s,x,x," +S["prefix"]="/usr/local" +S["exec_prefix"]="${prefix}" +S["PACKAGE_URL"]="" +S["PACKAGE_BUGREPORT"]="maunt@linutronix.de" +S["PACKAGE_STRING"]="autohello 1.1" +S["PACKAGE_VERSION"]="1.1" +S["PACKAGE_TARNAME"]="autohello" +S["PACKAGE_NAME"]="autohello" +S["PATH_SEPARATOR"]=":" +S["SHELL"]="/bin/bash" +_ACAWK +cat >>"$ac_tmp/subs1.awk" <<_ACAWK && + for (key in S) S_is_set[key] = 1 + FS = "" + +} +{ + line = $ 0 + nfields = split(line, field, "@") + substed = 0 + len = length(field[1]) + for (i = 2; i < nfields; i++) { + key = field[i] + keylen = length(key) + if (S_is_set[key]) { + value = S[key] + line = substr(line, 1, len) "" value "" substr(line, len + keylen + 3) + len += length(value) + length(field[++i]) + substed = 1 + } else + len += 1 + keylen + } + + print line +} + +_ACAWK +if sed "s/$ac_cr//" < /dev/null > /dev/null 2>&1; then + sed "s/$ac_cr\$//; s/$ac_cr/$ac_cs_awk_cr/g" +else + cat +fi < "$ac_tmp/subs1.awk" > "$ac_tmp/subs.awk" \ + || as_fn_error $? "could not setup config files machinery" "$LINENO" 5 +fi # test -n "$CONFIG_FILES" + +# Set up the scripts for CONFIG_HEADERS section. +# No need to generate them if there are no CONFIG_HEADERS. +# This happens for instance with `./config.status Makefile'. +if test -n "$CONFIG_HEADERS"; then +cat >"$ac_tmp/defines.awk" <<\_ACAWK || +BEGIN { +D["PACKAGE_NAME"]=" \"autohello\"" +D["PACKAGE_TARNAME"]=" \"autohello\"" +D["PACKAGE_VERSION"]=" \"1.1\"" +D["PACKAGE_STRING"]=" \"autohello 1.1\"" +D["PACKAGE_BUGREPORT"]=" \"maunt@linutronix.de\"" +D["PACKAGE_URL"]=" \"\"" +D["PACKAGE"]=" \"autohello\"" +D["VERSION"]=" \"1.1\"" + for (key in D) D_is_set[key] = 1 + FS = "" +} +/^[\t ]*#[\t ]*(define|undef)[\t ]+[_abcdefghijklmnopqrstuvwxyzABCDEFGHIJKLMNOPQRSTUVWXYZ][_abcdefghijklmnopqrstuvwxyzABCDEFGHIJKLMNOPQRSTUVWXYZ0123456789]*([\t (]|$)/ { + line = $ 0 + split(line, arg, " ") + if (arg[1] == "#") { + defundef = arg[2] + mac1 = arg[3] + } else { + defundef = substr(arg[1], 2) + mac1 = arg[2] + } + split(mac1, mac2, "(") #) + macro = mac2[1] + prefix = substr(line, 1, index(line, defundef) - 1) + if (D_is_set[macro]) { + # Preserve the white space surrounding the "#". + print prefix "define", macro P[macro] D[macro] + next + } else { + # Replace #undef with comments. This is necessary, for example, + # in the case of _POSIX_SOURCE, which is predefined and required + # on some systems where configure will not decide to define it. + if (defundef == "undef") { + print "/*", prefix defundef, macro, "*/" + next + } + } +} +{ print } +_ACAWK + as_fn_error $? "could not setup config headers machinery" "$LINENO" 5 +fi # test -n "$CONFIG_HEADERS" + + +eval set X " :F $CONFIG_FILES :H $CONFIG_HEADERS :C $CONFIG_COMMANDS" +shift +for ac_tag +do + case $ac_tag in + :[FHLC]) ac_mode=$ac_tag; continue;; + esac + case $ac_mode$ac_tag in + :[FHL]*:*);; + :L* | :C*:*) as_fn_error $? "invalid tag \`$ac_tag'" "$LINENO" 5;; + :[FH]-) ac_tag=-:-;; + :[FH]*) ac_tag=$ac_tag:$ac_tag.in;; + esac + ac_save_IFS=$IFS + IFS=: + set x $ac_tag + IFS=$ac_save_IFS + shift + ac_file=$1 + shift + + case $ac_mode in + :L) ac_source=$1;; + :[FH]) + ac_file_inputs= + for ac_f + do + case $ac_f in + -) ac_f="$ac_tmp/stdin";; + *) # Look for the file first in the build tree, then in the source tree + # (if the path is not absolute). The absolute path cannot be DOS-style, + # because $ac_f cannot contain `:'. + test -f "$ac_f" || + case $ac_f in + [\\/$]*) false;; + *) test -f "$srcdir/$ac_f" && ac_f="$srcdir/$ac_f";; + esac || + as_fn_error 1 "cannot find input file: \`$ac_f'" "$LINENO" 5;; + esac + case $ac_f in *\'*) ac_f=`$as_echo "$ac_f" | sed "s/'/'\\\\\\\\''/g"`;; esac + as_fn_append ac_file_inputs " '$ac_f'" + done + + # Let's still pretend it is `configure' which instantiates (i.e., don't + # use $as_me), people would be surprised to read: + # /* config.h. Generated by config.status. */ + configure_input='Generated from '` + $as_echo "$*" | sed 's|^[^:]*/||;s|:[^:]*/|, |g' + `' by configure.' + if test x"$ac_file" != x-; then + configure_input="$ac_file. $configure_input" + { $as_echo "$as_me:${as_lineno-$LINENO}: creating $ac_file" >&5 +$as_echo "$as_me: creating $ac_file" >&6;} + fi + # Neutralize special characters interpreted by sed in replacement strings. + case $configure_input in #( + *\&* | *\|* | *\\* ) + ac_sed_conf_input=`$as_echo "$configure_input" | + sed 's/[\\\\&|]/\\\\&/g'`;; #( + *) ac_sed_conf_input=$configure_input;; + esac + + case $ac_tag in + *:-:* | *:-) cat >"$ac_tmp/stdin" \ + || as_fn_error $? "could not create $ac_file" "$LINENO" 5 ;; + esac + ;; + esac + + ac_dir=`$as_dirname -- "$ac_file" || +$as_expr X"$ac_file" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \ + X"$ac_file" : 'X\(//\)[^/]' \| \ + X"$ac_file" : 'X\(//\)$' \| \ + X"$ac_file" : 'X\(/\)' \| . 2>/dev/null || +$as_echo X"$ac_file" | + sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ + s//\1/ + q + } + /^X\(\/\/\)[^/].*/{ + s//\1/ + q + } + /^X\(\/\/\)$/{ + s//\1/ + q + } + /^X\(\/\).*/{ + s//\1/ + q + } + s/.*/./; q'` + as_dir="$ac_dir"; as_fn_mkdir_p + ac_builddir=. + +case "$ac_dir" in +.) ac_dir_suffix= ac_top_builddir_sub=. ac_top_build_prefix= ;; +*) + ac_dir_suffix=/`$as_echo "$ac_dir" | sed 's|^\.[\\/]||'` + # A ".." for each directory in $ac_dir_suffix. + ac_top_builddir_sub=`$as_echo "$ac_dir_suffix" | sed 's|/[^\\/]*|/..|g;s|/||'` + case $ac_top_builddir_sub in + "") ac_top_builddir_sub=. ac_top_build_prefix= ;; + *) ac_top_build_prefix=$ac_top_builddir_sub/ ;; + esac ;; +esac +ac_abs_top_builddir=$ac_pwd +ac_abs_builddir=$ac_pwd$ac_dir_suffix +# for backward compatibility: +ac_top_builddir=$ac_top_build_prefix + +case $srcdir in + .) # We are building in place. + ac_srcdir=. + ac_top_srcdir=$ac_top_builddir_sub + ac_abs_top_srcdir=$ac_pwd ;; + [\\/]* | ?:[\\/]* ) # Absolute name. + ac_srcdir=$srcdir$ac_dir_suffix; + ac_top_srcdir=$srcdir + ac_abs_top_srcdir=$srcdir ;; + *) # Relative name. + ac_srcdir=$ac_top_build_prefix$srcdir$ac_dir_suffix + ac_top_srcdir=$ac_top_build_prefix$srcdir + ac_abs_top_srcdir=$ac_pwd/$srcdir ;; +esac +ac_abs_srcdir=$ac_abs_top_srcdir$ac_dir_suffix + + + case $ac_mode in + :F) + # + # CONFIG_FILE + # + + case $INSTALL in + [\\/$]* | ?:[\\/]* ) ac_INSTALL=$INSTALL ;; + *) ac_INSTALL=$ac_top_build_prefix$INSTALL ;; + esac + ac_MKDIR_P=$MKDIR_P + case $MKDIR_P in + [\\/$]* | ?:[\\/]* ) ;; + */*) ac_MKDIR_P=$ac_top_build_prefix$MKDIR_P ;; + esac +# If the template does not know about datarootdir, expand it. +# FIXME: This hack should be removed a few years after 2.60. +ac_datarootdir_hack=; ac_datarootdir_seen= +ac_sed_dataroot=' +/datarootdir/ { + p + q +} +/@datadir@/p +/@docdir@/p +/@infodir@/p +/@localedir@/p +/@mandir@/p' +case `eval "sed -n \"\$ac_sed_dataroot\" $ac_file_inputs"` in +*datarootdir*) ac_datarootdir_seen=yes;; +*@datadir@*|*@docdir@*|*@infodir@*|*@localedir@*|*@mandir@*) + { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: $ac_file_inputs seems to ignore the --datarootdir setting" >&5 +$as_echo "$as_me: WARNING: $ac_file_inputs seems to ignore the --datarootdir setting" >&2;} + ac_datarootdir_hack=' + s&@datadir@&${datarootdir}&g + s&@docdir@&${datarootdir}/doc/${PACKAGE_TARNAME}&g + s&@infodir@&${datarootdir}/info&g + s&@localedir@&${datarootdir}/locale&g + s&@mandir@&${datarootdir}/man&g + s&\${datarootdir}&${prefix}/share&g' ;; +esac +ac_sed_extra="/^[ ]*VPATH[ ]*=[ ]*/{ +h +s/// +s/^/:/ +s/[ ]*$/:/ +s/:\$(srcdir):/:/g +s/:\${srcdir}:/:/g +s/:@srcdir@:/:/g +s/^:*// +s/:*$// +x +s/\(=[ ]*\).*/\1/ +G +s/\n// +s/^[^=]*=[ ]*$// +} + +:t +/@[a-zA-Z_][a-zA-Z_0-9]*@/!b +s|@configure_input@|$ac_sed_conf_input|;t t +s&@top_builddir@&$ac_top_builddir_sub&;t t +s&@top_build_prefix@&$ac_top_build_prefix&;t t +s&@srcdir@&$ac_srcdir&;t t +s&@abs_srcdir@&$ac_abs_srcdir&;t t +s&@top_srcdir@&$ac_top_srcdir&;t t +s&@abs_top_srcdir@&$ac_abs_top_srcdir&;t t +s&@builddir@&$ac_builddir&;t t +s&@abs_builddir@&$ac_abs_builddir&;t t +s&@abs_top_builddir@&$ac_abs_top_builddir&;t t +s&@INSTALL@&$ac_INSTALL&;t t +s&@MKDIR_P@&$ac_MKDIR_P&;t t +$ac_datarootdir_hack +" +eval sed \"\$ac_sed_extra\" "$ac_file_inputs" | $AWK -f "$ac_tmp/subs.awk" \ + >$ac_tmp/out || as_fn_error $? "could not create $ac_file" "$LINENO" 5 + +test -z "$ac_datarootdir_hack$ac_datarootdir_seen" && + { ac_out=`sed -n '/\${datarootdir}/p' "$ac_tmp/out"`; test -n "$ac_out"; } && + { ac_out=`sed -n '/^[ ]*datarootdir[ ]*:*=/p' \ + "$ac_tmp/out"`; test -z "$ac_out"; } && + { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: $ac_file contains a reference to the variable \`datarootdir' +which seems to be undefined. Please make sure it is defined" >&5 +$as_echo "$as_me: WARNING: $ac_file contains a reference to the variable \`datarootdir' +which seems to be undefined. Please make sure it is defined" >&2;} + + rm -f "$ac_tmp/stdin" + case $ac_file in + -) cat "$ac_tmp/out" && rm -f "$ac_tmp/out";; + *) rm -f "$ac_file" && mv "$ac_tmp/out" "$ac_file";; + esac \ + || as_fn_error $? "could not create $ac_file" "$LINENO" 5 + ;; + :H) + # + # CONFIG_HEADER + # + if test x"$ac_file" != x-; then + { + $as_echo "/* $configure_input */" \ + && eval '$AWK -f "$ac_tmp/defines.awk"' "$ac_file_inputs" + } >"$ac_tmp/config.h" \ + || as_fn_error $? "could not create $ac_file" "$LINENO" 5 + if diff "$ac_file" "$ac_tmp/config.h" >/dev/null 2>&1; then + { $as_echo "$as_me:${as_lineno-$LINENO}: $ac_file is unchanged" >&5 +$as_echo "$as_me: $ac_file is unchanged" >&6;} + else + rm -f "$ac_file" + mv "$ac_tmp/config.h" "$ac_file" \ + || as_fn_error $? "could not create $ac_file" "$LINENO" 5 + fi + else + $as_echo "/* $configure_input */" \ + && eval '$AWK -f "$ac_tmp/defines.awk"' "$ac_file_inputs" \ + || as_fn_error $? "could not create -" "$LINENO" 5 + fi +# Compute "$ac_file"'s index in $config_headers. +_am_arg="$ac_file" +_am_stamp_count=1 +for _am_header in $config_headers :; do + case $_am_header in + $_am_arg | $_am_arg:* ) + break ;; + * ) + _am_stamp_count=`expr $_am_stamp_count + 1` ;; + esac +done +echo "timestamp for $_am_arg" >`$as_dirname -- "$_am_arg" || +$as_expr X"$_am_arg" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \ + X"$_am_arg" : 'X\(//\)[^/]' \| \ + X"$_am_arg" : 'X\(//\)$' \| \ + X"$_am_arg" : 'X\(/\)' \| . 2>/dev/null || +$as_echo X"$_am_arg" | + sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ + s//\1/ + q + } + /^X\(\/\/\)[^/].*/{ + s//\1/ + q + } + /^X\(\/\/\)$/{ + s//\1/ + q + } + /^X\(\/\).*/{ + s//\1/ + q + } + s/.*/./; q'`/stamp-h$_am_stamp_count + ;; + + :C) { $as_echo "$as_me:${as_lineno-$LINENO}: executing $ac_file commands" >&5 +$as_echo "$as_me: executing $ac_file commands" >&6;} + ;; + esac + + + case $ac_file$ac_mode in + "depfiles":C) test x"$AMDEP_TRUE" != x"" || { + # Older Autoconf quotes --file arguments for eval, but not when files + # are listed without --file. Let's play safe and only enable the eval + # if we detect the quoting. + case $CONFIG_FILES in + *\'*) eval set x "$CONFIG_FILES" ;; + *) set x $CONFIG_FILES ;; + esac + shift + for mf + do + # Strip MF so we end up with the name of the file. + mf=`echo "$mf" | sed -e 's/:.*$//'` + # Check whether this is an Automake generated Makefile or not. + # We used to match only the files named 'Makefile.in', but + # some people rename them; so instead we look at the file content. + # Grep'ing the first line is not enough: some people post-process + # each Makefile.in and add a new line on top of each file to say so. + # Grep'ing the whole file is not good either: AIX grep has a line + # limit of 2048, but all sed's we know have understand at least 4000. + if sed -n 's,^#.*generated by automake.*,X,p' "$mf" | grep X >/dev/null 2>&1; then + dirpart=`$as_dirname -- "$mf" || +$as_expr X"$mf" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \ + X"$mf" : 'X\(//\)[^/]' \| \ + X"$mf" : 'X\(//\)$' \| \ + X"$mf" : 'X\(/\)' \| . 2>/dev/null || +$as_echo X"$mf" | + sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ + s//\1/ + q + } + /^X\(\/\/\)[^/].*/{ + s//\1/ + q + } + /^X\(\/\/\)$/{ + s//\1/ + q + } + /^X\(\/\).*/{ + s//\1/ + q + } + s/.*/./; q'` + else + continue + fi + # Extract the definition of DEPDIR, am__include, and am__quote + # from the Makefile without running 'make'. + DEPDIR=`sed -n 's/^DEPDIR = //p' < "$mf"` + test -z "$DEPDIR" && continue + am__include=`sed -n 's/^am__include = //p' < "$mf"` + test -z "$am__include" && continue + am__quote=`sed -n 's/^am__quote = //p' < "$mf"` + # Find all dependency output files, they are included files with + # $(DEPDIR) in their names. We invoke sed twice because it is the + # simplest approach to changing $(DEPDIR) to its actual value in the + # expansion. + for file in `sed -n " + s/^$am__include $am__quote\(.*(DEPDIR).*\)$am__quote"'$/\1/p' <"$mf" | \ + sed -e 's/\$(DEPDIR)/'"$DEPDIR"'/g'`; do + # Make sure the directory exists. + test -f "$dirpart/$file" && continue + fdir=`$as_dirname -- "$file" || +$as_expr X"$file" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \ + X"$file" : 'X\(//\)[^/]' \| \ + X"$file" : 'X\(//\)$' \| \ + X"$file" : 'X\(/\)' \| . 2>/dev/null || +$as_echo X"$file" | + sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ + s//\1/ + q + } + /^X\(\/\/\)[^/].*/{ + s//\1/ + q + } + /^X\(\/\/\)$/{ + s//\1/ + q + } + /^X\(\/\).*/{ + s//\1/ + q + } + s/.*/./; q'` + as_dir=$dirpart/$fdir; as_fn_mkdir_p + # echo "creating $dirpart/$file" + echo '# dummy' > "$dirpart/$file" + done + done +} + ;; + + esac +done # for ac_tag + + +as_fn_exit 0 diff --git a/examples/yocto/meta-mini/recipes-hello/autohello/files/autohello/configure b/examples/yocto/meta-mini/recipes-hello/autohello/files/autohello/configure new file mode 100755 index 0000000..339a062 --- /dev/null +++ b/examples/yocto/meta-mini/recipes-hello/autohello/files/autohello/configure @@ -0,0 +1,4905 @@ +#! /bin/sh +# Guess values for system-dependent variables and create Makefiles. +# Generated by GNU Autoconf 2.69 for autohello 1.1. +# +# Report bugs to . +# +# +# Copyright (C) 1992-1996, 1998-2012 Free Software Foundation, Inc. +# +# +# This configure script is free software; the Free Software Foundation +# gives unlimited permission to copy, distribute and modify it. +## -------------------- ## +## M4sh Initialization. ## +## -------------------- ## + +# Be more Bourne compatible +DUALCASE=1; export DUALCASE # for MKS sh +if test -n "${ZSH_VERSION+set}" && (emulate sh) >/dev/null 2>&1; then : + emulate sh + NULLCMD=: + # Pre-4.2 versions of Zsh do word splitting on ${1+"$@"}, which + # is contrary to our usage. Disable this feature. + alias -g '${1+"$@"}'='"$@"' + setopt NO_GLOB_SUBST +else + case `(set -o) 2>/dev/null` in #( + *posix*) : + set -o posix ;; #( + *) : + ;; +esac +fi + + +as_nl=' +' +export as_nl +# Printing a long string crashes Solaris 7 /usr/bin/printf. +as_echo='\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\' +as_echo=$as_echo$as_echo$as_echo$as_echo$as_echo +as_echo=$as_echo$as_echo$as_echo$as_echo$as_echo$as_echo +# Prefer a ksh shell builtin over an external printf program on Solaris, +# but without wasting forks for bash or zsh. +if test -z "$BASH_VERSION$ZSH_VERSION" \ + && (test "X`print -r -- $as_echo`" = "X$as_echo") 2>/dev/null; then + as_echo='print -r --' + as_echo_n='print -rn --' +elif (test "X`printf %s $as_echo`" = "X$as_echo") 2>/dev/null; then + as_echo='printf %s\n' + as_echo_n='printf %s' +else + if test "X`(/usr/ucb/echo -n -n $as_echo) 2>/dev/null`" = "X-n $as_echo"; then + as_echo_body='eval /usr/ucb/echo -n "$1$as_nl"' + as_echo_n='/usr/ucb/echo -n' + else + as_echo_body='eval expr "X$1" : "X\\(.*\\)"' + as_echo_n_body='eval + arg=$1; + case $arg in #( + *"$as_nl"*) + expr "X$arg" : "X\\(.*\\)$as_nl"; + arg=`expr "X$arg" : ".*$as_nl\\(.*\\)"`;; + esac; + expr "X$arg" : "X\\(.*\\)" | tr -d "$as_nl" + ' + export as_echo_n_body + as_echo_n='sh -c $as_echo_n_body as_echo' + fi + export as_echo_body + as_echo='sh -c $as_echo_body as_echo' +fi + +# The user is always right. +if test "${PATH_SEPARATOR+set}" != set; then + PATH_SEPARATOR=: + (PATH='/bin;/bin'; FPATH=$PATH; sh -c :) >/dev/null 2>&1 && { + (PATH='/bin:/bin'; FPATH=$PATH; sh -c :) >/dev/null 2>&1 || + PATH_SEPARATOR=';' + } +fi + + +# IFS +# We need space, tab and new line, in precisely that order. Quoting is +# there to prevent editors from complaining about space-tab. +# (If _AS_PATH_WALK were called with IFS unset, it would disable word +# splitting by setting IFS to empty value.) +IFS=" "" $as_nl" + +# Find who we are. Look in the path if we contain no directory separator. +as_myself= +case $0 in #(( + *[\\/]* ) as_myself=$0 ;; + *) as_save_IFS=$IFS; IFS=$PATH_SEPARATOR +for as_dir in $PATH +do + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. + test -r "$as_dir/$0" && as_myself=$as_dir/$0 && break + done +IFS=$as_save_IFS + + ;; +esac +# We did not find ourselves, most probably we were run as `sh COMMAND' +# in which case we are not to be found in the path. +if test "x$as_myself" = x; then + as_myself=$0 +fi +if test ! -f "$as_myself"; then + $as_echo "$as_myself: error: cannot find myself; rerun with an absolute file name" >&2 + exit 1 +fi + +# Unset variables that we do not need and which cause bugs (e.g. in +# pre-3.0 UWIN ksh). But do not cause bugs in bash 2.01; the "|| exit 1" +# suppresses any "Segmentation fault" message there. '((' could +# trigger a bug in pdksh 5.2.14. +for as_var in BASH_ENV ENV MAIL MAILPATH +do eval test x\${$as_var+set} = xset \ + && ( (unset $as_var) || exit 1) >/dev/null 2>&1 && unset $as_var || : +done +PS1='$ ' +PS2='> ' +PS4='+ ' + +# NLS nuisances. +LC_ALL=C +export LC_ALL +LANGUAGE=C +export LANGUAGE + +# CDPATH. +(unset CDPATH) >/dev/null 2>&1 && unset CDPATH + +# Use a proper internal environment variable to ensure we don't fall + # into an infinite loop, continuously re-executing ourselves. + if test x"${_as_can_reexec}" != xno && test "x$CONFIG_SHELL" != x; then + _as_can_reexec=no; export _as_can_reexec; + # We cannot yet assume a decent shell, so we have to provide a +# neutralization value for shells without unset; and this also +# works around shells that cannot unset nonexistent variables. +# Preserve -v and -x to the replacement shell. +BASH_ENV=/dev/null +ENV=/dev/null +(unset BASH_ENV) >/dev/null 2>&1 && unset BASH_ENV ENV +case $- in # (((( + *v*x* | *x*v* ) as_opts=-vx ;; + *v* ) as_opts=-v ;; + *x* ) as_opts=-x ;; + * ) as_opts= ;; +esac +exec $CONFIG_SHELL $as_opts "$as_myself" ${1+"$@"} +# Admittedly, this is quite paranoid, since all the known shells bail +# out after a failed `exec'. +$as_echo "$0: could not re-execute with $CONFIG_SHELL" >&2 +as_fn_exit 255 + fi + # We don't want this to propagate to other subprocesses. + { _as_can_reexec=; unset _as_can_reexec;} +if test "x$CONFIG_SHELL" = x; then + as_bourne_compatible="if test -n \"\${ZSH_VERSION+set}\" && (emulate sh) >/dev/null 2>&1; then : + emulate sh + NULLCMD=: + # Pre-4.2 versions of Zsh do word splitting on \${1+\"\$@\"}, which + # is contrary to our usage. Disable this feature. + alias -g '\${1+\"\$@\"}'='\"\$@\"' + setopt NO_GLOB_SUBST +else + case \`(set -o) 2>/dev/null\` in #( + *posix*) : + set -o posix ;; #( + *) : + ;; +esac +fi +" + as_required="as_fn_return () { (exit \$1); } +as_fn_success () { as_fn_return 0; } +as_fn_failure () { as_fn_return 1; } +as_fn_ret_success () { return 0; } +as_fn_ret_failure () { return 1; } + +exitcode=0 +as_fn_success || { exitcode=1; echo as_fn_success failed.; } +as_fn_failure && { exitcode=1; echo as_fn_failure succeeded.; } +as_fn_ret_success || { exitcode=1; echo as_fn_ret_success failed.; } +as_fn_ret_failure && { exitcode=1; echo as_fn_ret_failure succeeded.; } +if ( set x; as_fn_ret_success y && test x = \"\$1\" ); then : + +else + exitcode=1; echo positional parameters were not saved. +fi +test x\$exitcode = x0 || exit 1 +test -x / || exit 1" + as_suggested=" as_lineno_1=";as_suggested=$as_suggested$LINENO;as_suggested=$as_suggested" as_lineno_1a=\$LINENO + as_lineno_2=";as_suggested=$as_suggested$LINENO;as_suggested=$as_suggested" as_lineno_2a=\$LINENO + eval 'test \"x\$as_lineno_1'\$as_run'\" != \"x\$as_lineno_2'\$as_run'\" && + test \"x\`expr \$as_lineno_1'\$as_run' + 1\`\" = \"x\$as_lineno_2'\$as_run'\"' || exit 1" + if (eval "$as_required") 2>/dev/null; then : + as_have_required=yes +else + as_have_required=no +fi + if test x$as_have_required = xyes && (eval "$as_suggested") 2>/dev/null; then : + +else + as_save_IFS=$IFS; IFS=$PATH_SEPARATOR +as_found=false +for as_dir in /bin$PATH_SEPARATOR/usr/bin$PATH_SEPARATOR$PATH +do + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. + as_found=: + case $as_dir in #( + /*) + for as_base in sh bash ksh sh5; do + # Try only shells that exist, to save several forks. + as_shell=$as_dir/$as_base + if { test -f "$as_shell" || test -f "$as_shell.exe"; } && + { $as_echo "$as_bourne_compatible""$as_required" | as_run=a "$as_shell"; } 2>/dev/null; then : + CONFIG_SHELL=$as_shell as_have_required=yes + if { $as_echo "$as_bourne_compatible""$as_suggested" | as_run=a "$as_shell"; } 2>/dev/null; then : + break 2 +fi +fi + done;; + esac + as_found=false +done +$as_found || { if { test -f "$SHELL" || test -f "$SHELL.exe"; } && + { $as_echo "$as_bourne_compatible""$as_required" | as_run=a "$SHELL"; } 2>/dev/null; then : + CONFIG_SHELL=$SHELL as_have_required=yes +fi; } +IFS=$as_save_IFS + + + if test "x$CONFIG_SHELL" != x; then : + export CONFIG_SHELL + # We cannot yet assume a decent shell, so we have to provide a +# neutralization value for shells without unset; and this also +# works around shells that cannot unset nonexistent variables. +# Preserve -v and -x to the replacement shell. +BASH_ENV=/dev/null +ENV=/dev/null +(unset BASH_ENV) >/dev/null 2>&1 && unset BASH_ENV ENV +case $- in # (((( + *v*x* | *x*v* ) as_opts=-vx ;; + *v* ) as_opts=-v ;; + *x* ) as_opts=-x ;; + * ) as_opts= ;; +esac +exec $CONFIG_SHELL $as_opts "$as_myself" ${1+"$@"} +# Admittedly, this is quite paranoid, since all the known shells bail +# out after a failed `exec'. +$as_echo "$0: could not re-execute with $CONFIG_SHELL" >&2 +exit 255 +fi + + if test x$as_have_required = xno; then : + $as_echo "$0: This script requires a shell more modern than all" + $as_echo "$0: the shells that I found on your system." + if test x${ZSH_VERSION+set} = xset ; then + $as_echo "$0: In particular, zsh $ZSH_VERSION has bugs and should" + $as_echo "$0: be upgraded to zsh 4.3.4 or later." + else + $as_echo "$0: Please tell bug-autoconf@gnu.org and +$0: maunt@linutronix.de about your system, including any +$0: error possibly output before this message. Then install +$0: a modern shell, or manually run the script under such a +$0: shell if you do have one." + fi + exit 1 +fi +fi +fi +SHELL=${CONFIG_SHELL-/bin/sh} +export SHELL +# Unset more variables known to interfere with behavior of common tools. +CLICOLOR_FORCE= GREP_OPTIONS= +unset CLICOLOR_FORCE GREP_OPTIONS + +## --------------------- ## +## M4sh Shell Functions. ## +## --------------------- ## +# as_fn_unset VAR +# --------------- +# Portably unset VAR. +as_fn_unset () +{ + { eval $1=; unset $1;} +} +as_unset=as_fn_unset + +# as_fn_set_status STATUS +# ----------------------- +# Set $? to STATUS, without forking. +as_fn_set_status () +{ + return $1 +} # as_fn_set_status + +# as_fn_exit STATUS +# ----------------- +# Exit the shell with STATUS, even in a "trap 0" or "set -e" context. +as_fn_exit () +{ + set +e + as_fn_set_status $1 + exit $1 +} # as_fn_exit + +# as_fn_mkdir_p +# ------------- +# Create "$as_dir" as a directory, including parents if necessary. +as_fn_mkdir_p () +{ + + case $as_dir in #( + -*) as_dir=./$as_dir;; + esac + test -d "$as_dir" || eval $as_mkdir_p || { + as_dirs= + while :; do + case $as_dir in #( + *\'*) as_qdir=`$as_echo "$as_dir" | sed "s/'/'\\\\\\\\''/g"`;; #'( + *) as_qdir=$as_dir;; + esac + as_dirs="'$as_qdir' $as_dirs" + as_dir=`$as_dirname -- "$as_dir" || +$as_expr X"$as_dir" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \ + X"$as_dir" : 'X\(//\)[^/]' \| \ + X"$as_dir" : 'X\(//\)$' \| \ + X"$as_dir" : 'X\(/\)' \| . 2>/dev/null || +$as_echo X"$as_dir" | + sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ + s//\1/ + q + } + /^X\(\/\/\)[^/].*/{ + s//\1/ + q + } + /^X\(\/\/\)$/{ + s//\1/ + q + } + /^X\(\/\).*/{ + s//\1/ + q + } + s/.*/./; q'` + test -d "$as_dir" && break + done + test -z "$as_dirs" || eval "mkdir $as_dirs" + } || test -d "$as_dir" || as_fn_error $? "cannot create directory $as_dir" + + +} # as_fn_mkdir_p + +# as_fn_executable_p FILE +# ----------------------- +# Test if FILE is an executable regular file. +as_fn_executable_p () +{ + test -f "$1" && test -x "$1" +} # as_fn_executable_p +# as_fn_append VAR VALUE +# ---------------------- +# Append the text in VALUE to the end of the definition contained in VAR. Take +# advantage of any shell optimizations that allow amortized linear growth over +# repeated appends, instead of the typical quadratic growth present in naive +# implementations. +if (eval "as_var=1; as_var+=2; test x\$as_var = x12") 2>/dev/null; then : + eval 'as_fn_append () + { + eval $1+=\$2 + }' +else + as_fn_append () + { + eval $1=\$$1\$2 + } +fi # as_fn_append + +# as_fn_arith ARG... +# ------------------ +# Perform arithmetic evaluation on the ARGs, and store the result in the +# global $as_val. Take advantage of shells that can avoid forks. The arguments +# must be portable across $(()) and expr. +if (eval "test \$(( 1 + 1 )) = 2") 2>/dev/null; then : + eval 'as_fn_arith () + { + as_val=$(( $* )) + }' +else + as_fn_arith () + { + as_val=`expr "$@" || test $? -eq 1` + } +fi # as_fn_arith + + +# as_fn_error STATUS ERROR [LINENO LOG_FD] +# ---------------------------------------- +# Output "`basename $0`: error: ERROR" to stderr. If LINENO and LOG_FD are +# provided, also output the error to LOG_FD, referencing LINENO. Then exit the +# script with STATUS, using 1 if that was 0. +as_fn_error () +{ + as_status=$1; test $as_status -eq 0 && as_status=1 + if test "$4"; then + as_lineno=${as_lineno-"$3"} as_lineno_stack=as_lineno_stack=$as_lineno_stack + $as_echo "$as_me:${as_lineno-$LINENO}: error: $2" >&$4 + fi + $as_echo "$as_me: error: $2" >&2 + as_fn_exit $as_status +} # as_fn_error + +if expr a : '\(a\)' >/dev/null 2>&1 && + test "X`expr 00001 : '.*\(...\)'`" = X001; then + as_expr=expr +else + as_expr=false +fi + +if (basename -- /) >/dev/null 2>&1 && test "X`basename -- / 2>&1`" = "X/"; then + as_basename=basename +else + as_basename=false +fi + +if (as_dir=`dirname -- /` && test "X$as_dir" = X/) >/dev/null 2>&1; then + as_dirname=dirname +else + as_dirname=false +fi + +as_me=`$as_basename -- "$0" || +$as_expr X/"$0" : '.*/\([^/][^/]*\)/*$' \| \ + X"$0" : 'X\(//\)$' \| \ + X"$0" : 'X\(/\)' \| . 2>/dev/null || +$as_echo X/"$0" | + sed '/^.*\/\([^/][^/]*\)\/*$/{ + s//\1/ + q + } + /^X\/\(\/\/\)$/{ + s//\1/ + q + } + /^X\/\(\/\).*/{ + s//\1/ + q + } + s/.*/./; q'` + +# Avoid depending upon Character Ranges. +as_cr_letters='abcdefghijklmnopqrstuvwxyz' +as_cr_LETTERS='ABCDEFGHIJKLMNOPQRSTUVWXYZ' +as_cr_Letters=$as_cr_letters$as_cr_LETTERS +as_cr_digits='0123456789' +as_cr_alnum=$as_cr_Letters$as_cr_digits + + + as_lineno_1=$LINENO as_lineno_1a=$LINENO + as_lineno_2=$LINENO as_lineno_2a=$LINENO + eval 'test "x$as_lineno_1'$as_run'" != "x$as_lineno_2'$as_run'" && + test "x`expr $as_lineno_1'$as_run' + 1`" = "x$as_lineno_2'$as_run'"' || { + # Blame Lee E. McMahon (1931-1989) for sed's syntax. :-) + sed -n ' + p + /[$]LINENO/= + ' <$as_myself | + sed ' + s/[$]LINENO.*/&-/ + t lineno + b + :lineno + N + :loop + s/[$]LINENO\([^'$as_cr_alnum'_].*\n\)\(.*\)/\2\1\2/ + t loop + s/-\n.*// + ' >$as_me.lineno && + chmod +x "$as_me.lineno" || + { $as_echo "$as_me: error: cannot create $as_me.lineno; rerun with a POSIX shell" >&2; as_fn_exit 1; } + + # If we had to re-execute with $CONFIG_SHELL, we're ensured to have + # already done that, so ensure we don't try to do so again and fall + # in an infinite loop. This has already happened in practice. + _as_can_reexec=no; export _as_can_reexec + # Don't try to exec as it changes $[0], causing all sort of problems + # (the dirname of $[0] is not the place where we might find the + # original and so on. Autoconf is especially sensitive to this). + . "./$as_me.lineno" + # Exit status is that of the last command. + exit +} + +ECHO_C= ECHO_N= ECHO_T= +case `echo -n x` in #((((( +-n*) + case `echo 'xy\c'` in + *c*) ECHO_T=' ';; # ECHO_T is single tab character. + xy) ECHO_C='\c';; + *) echo `echo ksh88 bug on AIX 6.1` > /dev/null + ECHO_T=' ';; + esac;; +*) + ECHO_N='-n';; +esac + +rm -f conf$$ conf$$.exe conf$$.file +if test -d conf$$.dir; then + rm -f conf$$.dir/conf$$.file +else + rm -f conf$$.dir + mkdir conf$$.dir 2>/dev/null +fi +if (echo >conf$$.file) 2>/dev/null; then + if ln -s conf$$.file conf$$ 2>/dev/null; then + as_ln_s='ln -s' + # ... but there are two gotchas: + # 1) On MSYS, both `ln -s file dir' and `ln file dir' fail. + # 2) DJGPP < 2.04 has no symlinks; `ln -s' creates a wrapper executable. + # In both cases, we have to default to `cp -pR'. + ln -s conf$$.file conf$$.dir 2>/dev/null && test ! -f conf$$.exe || + as_ln_s='cp -pR' + elif ln conf$$.file conf$$ 2>/dev/null; then + as_ln_s=ln + else + as_ln_s='cp -pR' + fi +else + as_ln_s='cp -pR' +fi +rm -f conf$$ conf$$.exe conf$$.dir/conf$$.file conf$$.file +rmdir conf$$.dir 2>/dev/null + +if mkdir -p . 2>/dev/null; then + as_mkdir_p='mkdir -p "$as_dir"' +else + test -d ./-p && rmdir ./-p + as_mkdir_p=false +fi + +as_test_x='test -x' +as_executable_p=as_fn_executable_p + +# Sed expression to map a string onto a valid CPP name. +as_tr_cpp="eval sed 'y%*$as_cr_letters%P$as_cr_LETTERS%;s%[^_$as_cr_alnum]%_%g'" + +# Sed expression to map a string onto a valid variable name. +as_tr_sh="eval sed 'y%*+%pp%;s%[^_$as_cr_alnum]%_%g'" + + +test -n "$DJDIR" || exec 7<&0 &1 + +# Name of the host. +# hostname on some systems (SVR3.2, old GNU/Linux) returns a bogus exit status, +# so uname gets run too. +ac_hostname=`(hostname || uname -n) 2>/dev/null | sed 1q` + +# +# Initializations. +# +ac_default_prefix=/usr/local +ac_clean_files= +ac_config_libobj_dir=. +LIBOBJS= +cross_compiling=no +subdirs= +MFLAGS= +MAKEFLAGS= + +# Identity of this package. +PACKAGE_NAME='autohello' +PACKAGE_TARNAME='autohello' +PACKAGE_VERSION='1.1' +PACKAGE_STRING='autohello 1.1' +PACKAGE_BUGREPORT='maunt@linutronix.de' +PACKAGE_URL='' + +ac_unique_file="autohello.c" +ac_subst_vars='am__EXEEXT_FALSE +am__EXEEXT_TRUE +LTLIBOBJS +LIBOBJS +am__fastdepCC_FALSE +am__fastdepCC_TRUE +CCDEPMODE +am__nodep +AMDEPBACKSLASH +AMDEP_FALSE +AMDEP_TRUE +am__quote +am__include +DEPDIR +OBJEXT +EXEEXT +ac_ct_CC +CPPFLAGS +LDFLAGS +CFLAGS +CC +AM_BACKSLASH +AM_DEFAULT_VERBOSITY +AM_DEFAULT_V +AM_V +am__untar +am__tar +AMTAR +am__leading_dot +SET_MAKE +AWK +mkdir_p +MKDIR_P +INSTALL_STRIP_PROGRAM +STRIP +install_sh +MAKEINFO +AUTOHEADER +AUTOMAKE +AUTOCONF +ACLOCAL +VERSION +PACKAGE +CYGPATH_W +am__isrc +INSTALL_DATA +INSTALL_SCRIPT +INSTALL_PROGRAM +target_alias +host_alias +build_alias +LIBS +ECHO_T +ECHO_N +ECHO_C +DEFS +mandir +localedir +libdir +psdir +pdfdir +dvidir +htmldir +infodir +docdir +oldincludedir +includedir +localstatedir +sharedstatedir +sysconfdir +datadir +datarootdir +libexecdir +sbindir +bindir +program_transform_name +prefix +exec_prefix +PACKAGE_URL +PACKAGE_BUGREPORT +PACKAGE_STRING +PACKAGE_VERSION +PACKAGE_TARNAME +PACKAGE_NAME +PATH_SEPARATOR +SHELL' +ac_subst_files='' +ac_user_opts=' +enable_option_checking +enable_silent_rules +enable_dependency_tracking +' + ac_precious_vars='build_alias +host_alias +target_alias +CC +CFLAGS +LDFLAGS +LIBS +CPPFLAGS' + + +# Initialize some variables set by options. +ac_init_help= +ac_init_version=false +ac_unrecognized_opts= +ac_unrecognized_sep= +# The variables have the same names as the options, with +# dashes changed to underlines. +cache_file=/dev/null +exec_prefix=NONE +no_create= +no_recursion= +prefix=NONE +program_prefix=NONE +program_suffix=NONE +program_transform_name=s,x,x, +silent= +site= +srcdir= +verbose= +x_includes=NONE +x_libraries=NONE + +# Installation directory options. +# These are left unexpanded so users can "make install exec_prefix=/foo" +# and all the variables that are supposed to be based on exec_prefix +# by default will actually change. +# Use braces instead of parens because sh, perl, etc. also accept them. +# (The list follows the same order as the GNU Coding Standards.) +bindir='${exec_prefix}/bin' +sbindir='${exec_prefix}/sbin' +libexecdir='${exec_prefix}/libexec' +datarootdir='${prefix}/share' +datadir='${datarootdir}' +sysconfdir='${prefix}/etc' +sharedstatedir='${prefix}/com' +localstatedir='${prefix}/var' +includedir='${prefix}/include' +oldincludedir='/usr/include' +docdir='${datarootdir}/doc/${PACKAGE_TARNAME}' +infodir='${datarootdir}/info' +htmldir='${docdir}' +dvidir='${docdir}' +pdfdir='${docdir}' +psdir='${docdir}' +libdir='${exec_prefix}/lib' +localedir='${datarootdir}/locale' +mandir='${datarootdir}/man' + +ac_prev= +ac_dashdash= +for ac_option +do + # If the previous option needs an argument, assign it. + if test -n "$ac_prev"; then + eval $ac_prev=\$ac_option + ac_prev= + continue + fi + + case $ac_option in + *=?*) ac_optarg=`expr "X$ac_option" : '[^=]*=\(.*\)'` ;; + *=) ac_optarg= ;; + *) ac_optarg=yes ;; + esac + + # Accept the important Cygnus configure options, so we can diagnose typos. + + case $ac_dashdash$ac_option in + --) + ac_dashdash=yes ;; + + -bindir | --bindir | --bindi | --bind | --bin | --bi) + ac_prev=bindir ;; + -bindir=* | --bindir=* | --bindi=* | --bind=* | --bin=* | --bi=*) + bindir=$ac_optarg ;; + + -build | --build | --buil | --bui | --bu) + ac_prev=build_alias ;; + -build=* | --build=* | --buil=* | --bui=* | --bu=*) + build_alias=$ac_optarg ;; + + -cache-file | --cache-file | --cache-fil | --cache-fi \ + | --cache-f | --cache- | --cache | --cach | --cac | --ca | --c) + ac_prev=cache_file ;; + -cache-file=* | --cache-file=* | --cache-fil=* | --cache-fi=* \ + | --cache-f=* | --cache-=* | --cache=* | --cach=* | --cac=* | --ca=* | --c=*) + cache_file=$ac_optarg ;; + + --config-cache | -C) + cache_file=config.cache ;; + + -datadir | --datadir | --datadi | --datad) + ac_prev=datadir ;; + -datadir=* | --datadir=* | --datadi=* | --datad=*) + datadir=$ac_optarg ;; + + -datarootdir | --datarootdir | --datarootdi | --datarootd | --dataroot \ + | --dataroo | --dataro | --datar) + ac_prev=datarootdir ;; + -datarootdir=* | --datarootdir=* | --datarootdi=* | --datarootd=* \ + | --dataroot=* | --dataroo=* | --dataro=* | --datar=*) + datarootdir=$ac_optarg ;; + + -disable-* | --disable-*) + ac_useropt=`expr "x$ac_option" : 'x-*disable-\(.*\)'` + # Reject names that are not valid shell variable names. + expr "x$ac_useropt" : ".*[^-+._$as_cr_alnum]" >/dev/null && + as_fn_error $? "invalid feature name: $ac_useropt" + ac_useropt_orig=$ac_useropt + ac_useropt=`$as_echo "$ac_useropt" | sed 's/[-+.]/_/g'` + case $ac_user_opts in + *" +"enable_$ac_useropt" +"*) ;; + *) ac_unrecognized_opts="$ac_unrecognized_opts$ac_unrecognized_sep--disable-$ac_useropt_orig" + ac_unrecognized_sep=', ';; + esac + eval enable_$ac_useropt=no ;; + + -docdir | --docdir | --docdi | --doc | --do) + ac_prev=docdir ;; + -docdir=* | --docdir=* | --docdi=* | --doc=* | --do=*) + docdir=$ac_optarg ;; + + -dvidir | --dvidir | --dvidi | --dvid | --dvi | --dv) + ac_prev=dvidir ;; + -dvidir=* | --dvidir=* | --dvidi=* | --dvid=* | --dvi=* | --dv=*) + dvidir=$ac_optarg ;; + + -enable-* | --enable-*) + ac_useropt=`expr "x$ac_option" : 'x-*enable-\([^=]*\)'` + # Reject names that are not valid shell variable names. + expr "x$ac_useropt" : ".*[^-+._$as_cr_alnum]" >/dev/null && + as_fn_error $? "invalid feature name: $ac_useropt" + ac_useropt_orig=$ac_useropt + ac_useropt=`$as_echo "$ac_useropt" | sed 's/[-+.]/_/g'` + case $ac_user_opts in + *" +"enable_$ac_useropt" +"*) ;; + *) ac_unrecognized_opts="$ac_unrecognized_opts$ac_unrecognized_sep--enable-$ac_useropt_orig" + ac_unrecognized_sep=', ';; + esac + eval enable_$ac_useropt=\$ac_optarg ;; + + -exec-prefix | --exec_prefix | --exec-prefix | --exec-prefi \ + | --exec-pref | --exec-pre | --exec-pr | --exec-p | --exec- \ + | --exec | --exe | --ex) + ac_prev=exec_prefix ;; + -exec-prefix=* | --exec_prefix=* | --exec-prefix=* | --exec-prefi=* \ + | --exec-pref=* | --exec-pre=* | --exec-pr=* | --exec-p=* | --exec-=* \ + | --exec=* | --exe=* | --ex=*) + exec_prefix=$ac_optarg ;; + + -gas | --gas | --ga | --g) + # Obsolete; use --with-gas. + with_gas=yes ;; + + -help | --help | --hel | --he | -h) + ac_init_help=long ;; + -help=r* | --help=r* | --hel=r* | --he=r* | -hr*) + ac_init_help=recursive ;; + -help=s* | --help=s* | --hel=s* | --he=s* | -hs*) + ac_init_help=short ;; + + -host | --host | --hos | --ho) + ac_prev=host_alias ;; + -host=* | --host=* | --hos=* | --ho=*) + host_alias=$ac_optarg ;; + + -htmldir | --htmldir | --htmldi | --htmld | --html | --htm | --ht) + ac_prev=htmldir ;; + -htmldir=* | --htmldir=* | --htmldi=* | --htmld=* | --html=* | --htm=* \ + | --ht=*) + htmldir=$ac_optarg ;; + + -includedir | --includedir | --includedi | --included | --include \ + | --includ | --inclu | --incl | --inc) + ac_prev=includedir ;; + -includedir=* | --includedir=* | --includedi=* | --included=* | --include=* \ + | --includ=* | --inclu=* | --incl=* | --inc=*) + includedir=$ac_optarg ;; + + -infodir | --infodir | --infodi | --infod | --info | --inf) + ac_prev=infodir ;; + -infodir=* | --infodir=* | --infodi=* | --infod=* | --info=* | --inf=*) + infodir=$ac_optarg ;; + + -libdir | --libdir | --libdi | --libd) + ac_prev=libdir ;; + -libdir=* | --libdir=* | --libdi=* | --libd=*) + libdir=$ac_optarg ;; + + -libexecdir | --libexecdir | --libexecdi | --libexecd | --libexec \ + | --libexe | --libex | --libe) + ac_prev=libexecdir ;; + -libexecdir=* | --libexecdir=* | --libexecdi=* | --libexecd=* | --libexec=* \ + | --libexe=* | --libex=* | --libe=*) + libexecdir=$ac_optarg ;; + + -localedir | --localedir | --localedi | --localed | --locale) + ac_prev=localedir ;; + -localedir=* | --localedir=* | --localedi=* | --localed=* | --locale=*) + localedir=$ac_optarg ;; + + -localstatedir | --localstatedir | --localstatedi | --localstated \ + | --localstate | --localstat | --localsta | --localst | --locals) + ac_prev=localstatedir ;; + -localstatedir=* | --localstatedir=* | --localstatedi=* | --localstated=* \ + | --localstate=* | --localstat=* | --localsta=* | --localst=* | --locals=*) + localstatedir=$ac_optarg ;; + + -mandir | --mandir | --mandi | --mand | --man | --ma | --m) + ac_prev=mandir ;; + -mandir=* | --mandir=* | --mandi=* | --mand=* | --man=* | --ma=* | --m=*) + mandir=$ac_optarg ;; + + -nfp | --nfp | --nf) + # Obsolete; use --without-fp. + with_fp=no ;; + + -no-create | --no-create | --no-creat | --no-crea | --no-cre \ + | --no-cr | --no-c | -n) + no_create=yes ;; + + -no-recursion | --no-recursion | --no-recursio | --no-recursi \ + | --no-recurs | --no-recur | --no-recu | --no-rec | --no-re | --no-r) + no_recursion=yes ;; + + -oldincludedir | --oldincludedir | --oldincludedi | --oldincluded \ + | --oldinclude | --oldinclud | --oldinclu | --oldincl | --oldinc \ + | --oldin | --oldi | --old | --ol | --o) + ac_prev=oldincludedir ;; + -oldincludedir=* | --oldincludedir=* | --oldincludedi=* | --oldincluded=* \ + | --oldinclude=* | --oldinclud=* | --oldinclu=* | --oldincl=* | --oldinc=* \ + | --oldin=* | --oldi=* | --old=* | --ol=* | --o=*) + oldincludedir=$ac_optarg ;; + + -prefix | --prefix | --prefi | --pref | --pre | --pr | --p) + ac_prev=prefix ;; + -prefix=* | --prefix=* | --prefi=* | --pref=* | --pre=* | --pr=* | --p=*) + prefix=$ac_optarg ;; + + -program-prefix | --program-prefix | --program-prefi | --program-pref \ + | --program-pre | --program-pr | --program-p) + ac_prev=program_prefix ;; + -program-prefix=* | --program-prefix=* | --program-prefi=* \ + | --program-pref=* | --program-pre=* | --program-pr=* | --program-p=*) + program_prefix=$ac_optarg ;; + + -program-suffix | --program-suffix | --program-suffi | --program-suff \ + | --program-suf | --program-su | --program-s) + ac_prev=program_suffix ;; + -program-suffix=* | --program-suffix=* | --program-suffi=* \ + | --program-suff=* | --program-suf=* | --program-su=* | --program-s=*) + program_suffix=$ac_optarg ;; + + -program-transform-name | --program-transform-name \ + | --program-transform-nam | --program-transform-na \ + | --program-transform-n | --program-transform- \ + | --program-transform | --program-transfor \ + | --program-transfo | --program-transf \ + | --program-trans | --program-tran \ + | --progr-tra | --program-tr | --program-t) + ac_prev=program_transform_name ;; + -program-transform-name=* | --program-transform-name=* \ + | --program-transform-nam=* | --program-transform-na=* \ + | --program-transform-n=* | --program-transform-=* \ + | --program-transform=* | --program-transfor=* \ + | --program-transfo=* | --program-transf=* \ + | --program-trans=* | --program-tran=* \ + | --progr-tra=* | --program-tr=* | --program-t=*) + program_transform_name=$ac_optarg ;; + + -pdfdir | --pdfdir | --pdfdi | --pdfd | --pdf | --pd) + ac_prev=pdfdir ;; + -pdfdir=* | --pdfdir=* | --pdfdi=* | --pdfd=* | --pdf=* | --pd=*) + pdfdir=$ac_optarg ;; + + -psdir | --psdir | --psdi | --psd | --ps) + ac_prev=psdir ;; + -psdir=* | --psdir=* | --psdi=* | --psd=* | --ps=*) + psdir=$ac_optarg ;; + + -q | -quiet | --quiet | --quie | --qui | --qu | --q \ + | -silent | --silent | --silen | --sile | --sil) + silent=yes ;; + + -sbindir | --sbindir | --sbindi | --sbind | --sbin | --sbi | --sb) + ac_prev=sbindir ;; + -sbindir=* | --sbindir=* | --sbindi=* | --sbind=* | --sbin=* \ + | --sbi=* | --sb=*) + sbindir=$ac_optarg ;; + + -sharedstatedir | --sharedstatedir | --sharedstatedi \ + | --sharedstated | --sharedstate | --sharedstat | --sharedsta \ + | --sharedst | --shareds | --shared | --share | --shar \ + | --sha | --sh) + ac_prev=sharedstatedir ;; + -sharedstatedir=* | --sharedstatedir=* | --sharedstatedi=* \ + | --sharedstated=* | --sharedstate=* | --sharedstat=* | --sharedsta=* \ + | --sharedst=* | --shareds=* | --shared=* | --share=* | --shar=* \ + | --sha=* | --sh=*) + sharedstatedir=$ac_optarg ;; + + -site | --site | --sit) + ac_prev=site ;; + -site=* | --site=* | --sit=*) + site=$ac_optarg ;; + + -srcdir | --srcdir | --srcdi | --srcd | --src | --sr) + ac_prev=srcdir ;; + -srcdir=* | --srcdir=* | --srcdi=* | --srcd=* | --src=* | --sr=*) + srcdir=$ac_optarg ;; + + -sysconfdir | --sysconfdir | --sysconfdi | --sysconfd | --sysconf \ + | --syscon | --sysco | --sysc | --sys | --sy) + ac_prev=sysconfdir ;; + -sysconfdir=* | --sysconfdir=* | --sysconfdi=* | --sysconfd=* | --sysconf=* \ + | --syscon=* | --sysco=* | --sysc=* | --sys=* | --sy=*) + sysconfdir=$ac_optarg ;; + + -target | --target | --targe | --targ | --tar | --ta | --t) + ac_prev=target_alias ;; + -target=* | --target=* | --targe=* | --targ=* | --tar=* | --ta=* | --t=*) + target_alias=$ac_optarg ;; + + -v | -verbose | --verbose | --verbos | --verbo | --verb) + verbose=yes ;; + + -version | --version | --versio | --versi | --vers | -V) + ac_init_version=: ;; + + -with-* | --with-*) + ac_useropt=`expr "x$ac_option" : 'x-*with-\([^=]*\)'` + # Reject names that are not valid shell variable names. + expr "x$ac_useropt" : ".*[^-+._$as_cr_alnum]" >/dev/null && + as_fn_error $? "invalid package name: $ac_useropt" + ac_useropt_orig=$ac_useropt + ac_useropt=`$as_echo "$ac_useropt" | sed 's/[-+.]/_/g'` + case $ac_user_opts in + *" +"with_$ac_useropt" +"*) ;; + *) ac_unrecognized_opts="$ac_unrecognized_opts$ac_unrecognized_sep--with-$ac_useropt_orig" + ac_unrecognized_sep=', ';; + esac + eval with_$ac_useropt=\$ac_optarg ;; + + -without-* | --without-*) + ac_useropt=`expr "x$ac_option" : 'x-*without-\(.*\)'` + # Reject names that are not valid shell variable names. + expr "x$ac_useropt" : ".*[^-+._$as_cr_alnum]" >/dev/null && + as_fn_error $? "invalid package name: $ac_useropt" + ac_useropt_orig=$ac_useropt + ac_useropt=`$as_echo "$ac_useropt" | sed 's/[-+.]/_/g'` + case $ac_user_opts in + *" +"with_$ac_useropt" +"*) ;; + *) ac_unrecognized_opts="$ac_unrecognized_opts$ac_unrecognized_sep--without-$ac_useropt_orig" + ac_unrecognized_sep=', ';; + esac + eval with_$ac_useropt=no ;; + + --x) + # Obsolete; use --with-x. + with_x=yes ;; + + -x-includes | --x-includes | --x-include | --x-includ | --x-inclu \ + | --x-incl | --x-inc | --x-in | --x-i) + ac_prev=x_includes ;; + -x-includes=* | --x-includes=* | --x-include=* | --x-includ=* | --x-inclu=* \ + | --x-incl=* | --x-inc=* | --x-in=* | --x-i=*) + x_includes=$ac_optarg ;; + + -x-libraries | --x-libraries | --x-librarie | --x-librari \ + | --x-librar | --x-libra | --x-libr | --x-lib | --x-li | --x-l) + ac_prev=x_libraries ;; + -x-libraries=* | --x-libraries=* | --x-librarie=* | --x-librari=* \ + | --x-librar=* | --x-libra=* | --x-libr=* | --x-lib=* | --x-li=* | --x-l=*) + x_libraries=$ac_optarg ;; + + -*) as_fn_error $? "unrecognized option: \`$ac_option' +Try \`$0 --help' for more information" + ;; + + *=*) + ac_envvar=`expr "x$ac_option" : 'x\([^=]*\)='` + # Reject names that are not valid shell variable names. + case $ac_envvar in #( + '' | [0-9]* | *[!_$as_cr_alnum]* ) + as_fn_error $? "invalid variable name: \`$ac_envvar'" ;; + esac + eval $ac_envvar=\$ac_optarg + export $ac_envvar ;; + + *) + # FIXME: should be removed in autoconf 3.0. + $as_echo "$as_me: WARNING: you should use --build, --host, --target" >&2 + expr "x$ac_option" : ".*[^-._$as_cr_alnum]" >/dev/null && + $as_echo "$as_me: WARNING: invalid host type: $ac_option" >&2 + : "${build_alias=$ac_option} ${host_alias=$ac_option} ${target_alias=$ac_option}" + ;; + + esac +done + +if test -n "$ac_prev"; then + ac_option=--`echo $ac_prev | sed 's/_/-/g'` + as_fn_error $? "missing argument to $ac_option" +fi + +if test -n "$ac_unrecognized_opts"; then + case $enable_option_checking in + no) ;; + fatal) as_fn_error $? "unrecognized options: $ac_unrecognized_opts" ;; + *) $as_echo "$as_me: WARNING: unrecognized options: $ac_unrecognized_opts" >&2 ;; + esac +fi + +# Check all directory arguments for consistency. +for ac_var in exec_prefix prefix bindir sbindir libexecdir datarootdir \ + datadir sysconfdir sharedstatedir localstatedir includedir \ + oldincludedir docdir infodir htmldir dvidir pdfdir psdir \ + libdir localedir mandir +do + eval ac_val=\$$ac_var + # Remove trailing slashes. + case $ac_val in + */ ) + ac_val=`expr "X$ac_val" : 'X\(.*[^/]\)' \| "X$ac_val" : 'X\(.*\)'` + eval $ac_var=\$ac_val;; + esac + # Be sure to have absolute directory names. + case $ac_val in + [\\/$]* | ?:[\\/]* ) continue;; + NONE | '' ) case $ac_var in *prefix ) continue;; esac;; + esac + as_fn_error $? "expected an absolute directory name for --$ac_var: $ac_val" +done + +# There might be people who depend on the old broken behavior: `$host' +# used to hold the argument of --host etc. +# FIXME: To remove some day. +build=$build_alias +host=$host_alias +target=$target_alias + +# FIXME: To remove some day. +if test "x$host_alias" != x; then + if test "x$build_alias" = x; then + cross_compiling=maybe + elif test "x$build_alias" != "x$host_alias"; then + cross_compiling=yes + fi +fi + +ac_tool_prefix= +test -n "$host_alias" && ac_tool_prefix=$host_alias- + +test "$silent" = yes && exec 6>/dev/null + + +ac_pwd=`pwd` && test -n "$ac_pwd" && +ac_ls_di=`ls -di .` && +ac_pwd_ls_di=`cd "$ac_pwd" && ls -di .` || + as_fn_error $? "working directory cannot be determined" +test "X$ac_ls_di" = "X$ac_pwd_ls_di" || + as_fn_error $? "pwd does not report name of working directory" + + +# Find the source files, if location was not specified. +if test -z "$srcdir"; then + ac_srcdir_defaulted=yes + # Try the directory containing this script, then the parent directory. + ac_confdir=`$as_dirname -- "$as_myself" || +$as_expr X"$as_myself" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \ + X"$as_myself" : 'X\(//\)[^/]' \| \ + X"$as_myself" : 'X\(//\)$' \| \ + X"$as_myself" : 'X\(/\)' \| . 2>/dev/null || +$as_echo X"$as_myself" | + sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ + s//\1/ + q + } + /^X\(\/\/\)[^/].*/{ + s//\1/ + q + } + /^X\(\/\/\)$/{ + s//\1/ + q + } + /^X\(\/\).*/{ + s//\1/ + q + } + s/.*/./; q'` + srcdir=$ac_confdir + if test ! -r "$srcdir/$ac_unique_file"; then + srcdir=.. + fi +else + ac_srcdir_defaulted=no +fi +if test ! -r "$srcdir/$ac_unique_file"; then + test "$ac_srcdir_defaulted" = yes && srcdir="$ac_confdir or .." + as_fn_error $? "cannot find sources ($ac_unique_file) in $srcdir" +fi +ac_msg="sources are in $srcdir, but \`cd $srcdir' does not work" +ac_abs_confdir=`( + cd "$srcdir" && test -r "./$ac_unique_file" || as_fn_error $? "$ac_msg" + pwd)` +# When building in place, set srcdir=. +if test "$ac_abs_confdir" = "$ac_pwd"; then + srcdir=. +fi +# Remove unnecessary trailing slashes from srcdir. +# Double slashes in file names in object file debugging info +# mess up M-x gdb in Emacs. +case $srcdir in +*/) srcdir=`expr "X$srcdir" : 'X\(.*[^/]\)' \| "X$srcdir" : 'X\(.*\)'`;; +esac +for ac_var in $ac_precious_vars; do + eval ac_env_${ac_var}_set=\${${ac_var}+set} + eval ac_env_${ac_var}_value=\$${ac_var} + eval ac_cv_env_${ac_var}_set=\${${ac_var}+set} + eval ac_cv_env_${ac_var}_value=\$${ac_var} +done + +# +# Report the --help message. +# +if test "$ac_init_help" = "long"; then + # Omit some internal or obsolete options to make the list less imposing. + # This message is too long to be a string in the A/UX 3.1 sh. + cat <<_ACEOF +\`configure' configures autohello 1.1 to adapt to many kinds of systems. + +Usage: $0 [OPTION]... [VAR=VALUE]... + +To assign environment variables (e.g., CC, CFLAGS...), specify them as +VAR=VALUE. See below for descriptions of some of the useful variables. + +Defaults for the options are specified in brackets. + +Configuration: + -h, --help display this help and exit + --help=short display options specific to this package + --help=recursive display the short help of all the included packages + -V, --version display version information and exit + -q, --quiet, --silent do not print \`checking ...' messages + --cache-file=FILE cache test results in FILE [disabled] + -C, --config-cache alias for \`--cache-file=config.cache' + -n, --no-create do not create output files + --srcdir=DIR find the sources in DIR [configure dir or \`..'] + +Installation directories: + --prefix=PREFIX install architecture-independent files in PREFIX + [$ac_default_prefix] + --exec-prefix=EPREFIX install architecture-dependent files in EPREFIX + [PREFIX] + +By default, \`make install' will install all the files in +\`$ac_default_prefix/bin', \`$ac_default_prefix/lib' etc. You can specify +an installation prefix other than \`$ac_default_prefix' using \`--prefix', +for instance \`--prefix=\$HOME'. + +For better control, use the options below. + +Fine tuning of the installation directories: + --bindir=DIR user executables [EPREFIX/bin] + --sbindir=DIR system admin executables [EPREFIX/sbin] + --libexecdir=DIR program executables [EPREFIX/libexec] + --sysconfdir=DIR read-only single-machine data [PREFIX/etc] + --sharedstatedir=DIR modifiable architecture-independent data [PREFIX/com] + --localstatedir=DIR modifiable single-machine data [PREFIX/var] + --libdir=DIR object code libraries [EPREFIX/lib] + --includedir=DIR C header files [PREFIX/include] + --oldincludedir=DIR C header files for non-gcc [/usr/include] + --datarootdir=DIR read-only arch.-independent data root [PREFIX/share] + --datadir=DIR read-only architecture-independent data [DATAROOTDIR] + --infodir=DIR info documentation [DATAROOTDIR/info] + --localedir=DIR locale-dependent data [DATAROOTDIR/locale] + --mandir=DIR man documentation [DATAROOTDIR/man] + --docdir=DIR documentation root [DATAROOTDIR/doc/autohello] + --htmldir=DIR html documentation [DOCDIR] + --dvidir=DIR dvi documentation [DOCDIR] + --pdfdir=DIR pdf documentation [DOCDIR] + --psdir=DIR ps documentation [DOCDIR] +_ACEOF + + cat <<\_ACEOF + +Program names: + --program-prefix=PREFIX prepend PREFIX to installed program names + --program-suffix=SUFFIX append SUFFIX to installed program names + --program-transform-name=PROGRAM run sed PROGRAM on installed program names +_ACEOF +fi + +if test -n "$ac_init_help"; then + case $ac_init_help in + short | recursive ) echo "Configuration of autohello 1.1:";; + esac + cat <<\_ACEOF + +Optional Features: + --disable-option-checking ignore unrecognized --enable/--with options + --disable-FEATURE do not include FEATURE (same as --enable-FEATURE=no) + --enable-FEATURE[=ARG] include FEATURE [ARG=yes] + --enable-silent-rules less verbose build output (undo: "make V=1") + --disable-silent-rules verbose build output (undo: "make V=0") + --enable-dependency-tracking + do not reject slow dependency extractors + --disable-dependency-tracking + speeds up one-time build + +Some influential environment variables: + CC C compiler command + CFLAGS C compiler flags + LDFLAGS linker flags, e.g. -L if you have libraries in a + nonstandard directory + LIBS libraries to pass to the linker, e.g. -l + CPPFLAGS (Objective) C/C++ preprocessor flags, e.g. -I if + you have headers in a nonstandard directory + +Use these variables to override the choices made by `configure' or to help +it to find libraries and programs with nonstandard names/locations. + +Report bugs to . +_ACEOF +ac_status=$? +fi + +if test "$ac_init_help" = "recursive"; then + # If there are subdirs, report their specific --help. + for ac_dir in : $ac_subdirs_all; do test "x$ac_dir" = x: && continue + test -d "$ac_dir" || + { cd "$srcdir" && ac_pwd=`pwd` && srcdir=. && test -d "$ac_dir"; } || + continue + ac_builddir=. + +case "$ac_dir" in +.) ac_dir_suffix= ac_top_builddir_sub=. ac_top_build_prefix= ;; +*) + ac_dir_suffix=/`$as_echo "$ac_dir" | sed 's|^\.[\\/]||'` + # A ".." for each directory in $ac_dir_suffix. + ac_top_builddir_sub=`$as_echo "$ac_dir_suffix" | sed 's|/[^\\/]*|/..|g;s|/||'` + case $ac_top_builddir_sub in + "") ac_top_builddir_sub=. ac_top_build_prefix= ;; + *) ac_top_build_prefix=$ac_top_builddir_sub/ ;; + esac ;; +esac +ac_abs_top_builddir=$ac_pwd +ac_abs_builddir=$ac_pwd$ac_dir_suffix +# for backward compatibility: +ac_top_builddir=$ac_top_build_prefix + +case $srcdir in + .) # We are building in place. + ac_srcdir=. + ac_top_srcdir=$ac_top_builddir_sub + ac_abs_top_srcdir=$ac_pwd ;; + [\\/]* | ?:[\\/]* ) # Absolute name. + ac_srcdir=$srcdir$ac_dir_suffix; + ac_top_srcdir=$srcdir + ac_abs_top_srcdir=$srcdir ;; + *) # Relative name. + ac_srcdir=$ac_top_build_prefix$srcdir$ac_dir_suffix + ac_top_srcdir=$ac_top_build_prefix$srcdir + ac_abs_top_srcdir=$ac_pwd/$srcdir ;; +esac +ac_abs_srcdir=$ac_abs_top_srcdir$ac_dir_suffix + + cd "$ac_dir" || { ac_status=$?; continue; } + # Check for guested configure. + if test -f "$ac_srcdir/configure.gnu"; then + echo && + $SHELL "$ac_srcdir/configure.gnu" --help=recursive + elif test -f "$ac_srcdir/configure"; then + echo && + $SHELL "$ac_srcdir/configure" --help=recursive + else + $as_echo "$as_me: WARNING: no configuration information is in $ac_dir" >&2 + fi || ac_status=$? + cd "$ac_pwd" || { ac_status=$?; break; } + done +fi + +test -n "$ac_init_help" && exit $ac_status +if $ac_init_version; then + cat <<\_ACEOF +autohello configure 1.1 +generated by GNU Autoconf 2.69 + +Copyright (C) 2012 Free Software Foundation, Inc. +This configure script is free software; the Free Software Foundation +gives unlimited permission to copy, distribute and modify it. +_ACEOF + exit +fi + +## ------------------------ ## +## Autoconf initialization. ## +## ------------------------ ## + +# ac_fn_c_try_compile LINENO +# -------------------------- +# Try to compile conftest.$ac_ext, and return whether this succeeded. +ac_fn_c_try_compile () +{ + as_lineno=${as_lineno-"$1"} as_lineno_stack=as_lineno_stack=$as_lineno_stack + rm -f conftest.$ac_objext + if { { ac_try="$ac_compile" +case "(($ac_try" in + *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; + *) ac_try_echo=$ac_try;; +esac +eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\"" +$as_echo "$ac_try_echo"; } >&5 + (eval "$ac_compile") 2>conftest.err + ac_status=$? + if test -s conftest.err; then + grep -v '^ *+' conftest.err >conftest.er1 + cat conftest.er1 >&5 + mv -f conftest.er1 conftest.err + fi + $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 + test $ac_status = 0; } && { + test -z "$ac_c_werror_flag" || + test ! -s conftest.err + } && test -s conftest.$ac_objext; then : + ac_retval=0 +else + $as_echo "$as_me: failed program was:" >&5 +sed 's/^/| /' conftest.$ac_ext >&5 + + ac_retval=1 +fi + eval $as_lineno_stack; ${as_lineno_stack:+:} unset as_lineno + as_fn_set_status $ac_retval + +} # ac_fn_c_try_compile +cat >config.log <<_ACEOF +This file contains any messages produced by compilers while +running configure, to aid debugging if configure makes a mistake. + +It was created by autohello $as_me 1.1, which was +generated by GNU Autoconf 2.69. Invocation command line was + + $ $0 $@ + +_ACEOF +exec 5>>config.log +{ +cat <<_ASUNAME +## --------- ## +## Platform. ## +## --------- ## + +hostname = `(hostname || uname -n) 2>/dev/null | sed 1q` +uname -m = `(uname -m) 2>/dev/null || echo unknown` +uname -r = `(uname -r) 2>/dev/null || echo unknown` +uname -s = `(uname -s) 2>/dev/null || echo unknown` +uname -v = `(uname -v) 2>/dev/null || echo unknown` + +/usr/bin/uname -p = `(/usr/bin/uname -p) 2>/dev/null || echo unknown` +/bin/uname -X = `(/bin/uname -X) 2>/dev/null || echo unknown` + +/bin/arch = `(/bin/arch) 2>/dev/null || echo unknown` +/usr/bin/arch -k = `(/usr/bin/arch -k) 2>/dev/null || echo unknown` +/usr/convex/getsysinfo = `(/usr/convex/getsysinfo) 2>/dev/null || echo unknown` +/usr/bin/hostinfo = `(/usr/bin/hostinfo) 2>/dev/null || echo unknown` +/bin/machine = `(/bin/machine) 2>/dev/null || echo unknown` +/usr/bin/oslevel = `(/usr/bin/oslevel) 2>/dev/null || echo unknown` +/bin/universe = `(/bin/universe) 2>/dev/null || echo unknown` + +_ASUNAME + +as_save_IFS=$IFS; IFS=$PATH_SEPARATOR +for as_dir in $PATH +do + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. + $as_echo "PATH: $as_dir" + done +IFS=$as_save_IFS + +} >&5 + +cat >&5 <<_ACEOF + + +## ----------- ## +## Core tests. ## +## ----------- ## + +_ACEOF + + +# Keep a trace of the command line. +# Strip out --no-create and --no-recursion so they do not pile up. +# Strip out --silent because we don't want to record it for future runs. +# Also quote any args containing shell meta-characters. +# Make two passes to allow for proper duplicate-argument suppression. +ac_configure_args= +ac_configure_args0= +ac_configure_args1= +ac_must_keep_next=false +for ac_pass in 1 2 +do + for ac_arg + do + case $ac_arg in + -no-create | --no-c* | -n | -no-recursion | --no-r*) continue ;; + -q | -quiet | --quiet | --quie | --qui | --qu | --q \ + | -silent | --silent | --silen | --sile | --sil) + continue ;; + *\'*) + ac_arg=`$as_echo "$ac_arg" | sed "s/'/'\\\\\\\\''/g"` ;; + esac + case $ac_pass in + 1) as_fn_append ac_configure_args0 " '$ac_arg'" ;; + 2) + as_fn_append ac_configure_args1 " '$ac_arg'" + if test $ac_must_keep_next = true; then + ac_must_keep_next=false # Got value, back to normal. + else + case $ac_arg in + *=* | --config-cache | -C | -disable-* | --disable-* \ + | -enable-* | --enable-* | -gas | --g* | -nfp | --nf* \ + | -q | -quiet | --q* | -silent | --sil* | -v | -verb* \ + | -with-* | --with-* | -without-* | --without-* | --x) + case "$ac_configure_args0 " in + "$ac_configure_args1"*" '$ac_arg' "* ) continue ;; + esac + ;; + -* ) ac_must_keep_next=true ;; + esac + fi + as_fn_append ac_configure_args " '$ac_arg'" + ;; + esac + done +done +{ ac_configure_args0=; unset ac_configure_args0;} +{ ac_configure_args1=; unset ac_configure_args1;} + +# When interrupted or exit'd, cleanup temporary files, and complete +# config.log. We remove comments because anyway the quotes in there +# would cause problems or look ugly. +# WARNING: Use '\'' to represent an apostrophe within the trap. +# WARNING: Do not start the trap code with a newline, due to a FreeBSD 4.0 bug. +trap 'exit_status=$? + # Save into config.log some information that might help in debugging. + { + echo + + $as_echo "## ---------------- ## +## Cache variables. ## +## ---------------- ##" + echo + # The following way of writing the cache mishandles newlines in values, +( + for ac_var in `(set) 2>&1 | sed -n '\''s/^\([a-zA-Z_][a-zA-Z0-9_]*\)=.*/\1/p'\''`; do + eval ac_val=\$$ac_var + case $ac_val in #( + *${as_nl}*) + case $ac_var in #( + *_cv_*) { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: cache variable $ac_var contains a newline" >&5 +$as_echo "$as_me: WARNING: cache variable $ac_var contains a newline" >&2;} ;; + esac + case $ac_var in #( + _ | IFS | as_nl) ;; #( + BASH_ARGV | BASH_SOURCE) eval $ac_var= ;; #( + *) { eval $ac_var=; unset $ac_var;} ;; + esac ;; + esac + done + (set) 2>&1 | + case $as_nl`(ac_space='\'' '\''; set) 2>&1` in #( + *${as_nl}ac_space=\ *) + sed -n \ + "s/'\''/'\''\\\\'\'''\''/g; + s/^\\([_$as_cr_alnum]*_cv_[_$as_cr_alnum]*\\)=\\(.*\\)/\\1='\''\\2'\''/p" + ;; #( + *) + sed -n "/^[_$as_cr_alnum]*_cv_[_$as_cr_alnum]*=/p" + ;; + esac | + sort +) + echo + + $as_echo "## ----------------- ## +## Output variables. ## +## ----------------- ##" + echo + for ac_var in $ac_subst_vars + do + eval ac_val=\$$ac_var + case $ac_val in + *\'\''*) ac_val=`$as_echo "$ac_val" | sed "s/'\''/'\''\\\\\\\\'\'''\''/g"`;; + esac + $as_echo "$ac_var='\''$ac_val'\''" + done | sort + echo + + if test -n "$ac_subst_files"; then + $as_echo "## ------------------- ## +## File substitutions. ## +## ------------------- ##" + echo + for ac_var in $ac_subst_files + do + eval ac_val=\$$ac_var + case $ac_val in + *\'\''*) ac_val=`$as_echo "$ac_val" | sed "s/'\''/'\''\\\\\\\\'\'''\''/g"`;; + esac + $as_echo "$ac_var='\''$ac_val'\''" + done | sort + echo + fi + + if test -s confdefs.h; then + $as_echo "## ----------- ## +## confdefs.h. ## +## ----------- ##" + echo + cat confdefs.h + echo + fi + test "$ac_signal" != 0 && + $as_echo "$as_me: caught signal $ac_signal" + $as_echo "$as_me: exit $exit_status" + } >&5 + rm -f core *.core core.conftest.* && + rm -f -r conftest* confdefs* conf$$* $ac_clean_files && + exit $exit_status +' 0 +for ac_signal in 1 2 13 15; do + trap 'ac_signal='$ac_signal'; as_fn_exit 1' $ac_signal +done +ac_signal=0 + +# confdefs.h avoids OS command line length limits that DEFS can exceed. +rm -f -r conftest* confdefs.h + +$as_echo "/* confdefs.h */" > confdefs.h + +# Predefined preprocessor variables. + +cat >>confdefs.h <<_ACEOF +#define PACKAGE_NAME "$PACKAGE_NAME" +_ACEOF + +cat >>confdefs.h <<_ACEOF +#define PACKAGE_TARNAME "$PACKAGE_TARNAME" +_ACEOF + +cat >>confdefs.h <<_ACEOF +#define PACKAGE_VERSION "$PACKAGE_VERSION" +_ACEOF + +cat >>confdefs.h <<_ACEOF +#define PACKAGE_STRING "$PACKAGE_STRING" +_ACEOF + +cat >>confdefs.h <<_ACEOF +#define PACKAGE_BUGREPORT "$PACKAGE_BUGREPORT" +_ACEOF + +cat >>confdefs.h <<_ACEOF +#define PACKAGE_URL "$PACKAGE_URL" +_ACEOF + + +# Let the site file select an alternate cache file if it wants to. +# Prefer an explicitly selected file to automatically selected ones. +ac_site_file1=NONE +ac_site_file2=NONE +if test -n "$CONFIG_SITE"; then + # We do not want a PATH search for config.site. + case $CONFIG_SITE in #(( + -*) ac_site_file1=./$CONFIG_SITE;; + */*) ac_site_file1=$CONFIG_SITE;; + *) ac_site_file1=./$CONFIG_SITE;; + esac +elif test "x$prefix" != xNONE; then + ac_site_file1=$prefix/share/config.site + ac_site_file2=$prefix/etc/config.site +else + ac_site_file1=$ac_default_prefix/share/config.site + ac_site_file2=$ac_default_prefix/etc/config.site +fi +for ac_site_file in "$ac_site_file1" "$ac_site_file2" +do + test "x$ac_site_file" = xNONE && continue + if test /dev/null != "$ac_site_file" && test -r "$ac_site_file"; then + { $as_echo "$as_me:${as_lineno-$LINENO}: loading site script $ac_site_file" >&5 +$as_echo "$as_me: loading site script $ac_site_file" >&6;} + sed 's/^/| /' "$ac_site_file" >&5 + . "$ac_site_file" \ + || { { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5 +$as_echo "$as_me: error: in \`$ac_pwd':" >&2;} +as_fn_error $? "failed to load site script $ac_site_file +See \`config.log' for more details" "$LINENO" 5; } + fi +done + +if test -r "$cache_file"; then + # Some versions of bash will fail to source /dev/null (special files + # actually), so we avoid doing that. DJGPP emulates it as a regular file. + if test /dev/null != "$cache_file" && test -f "$cache_file"; then + { $as_echo "$as_me:${as_lineno-$LINENO}: loading cache $cache_file" >&5 +$as_echo "$as_me: loading cache $cache_file" >&6;} + case $cache_file in + [\\/]* | ?:[\\/]* ) . "$cache_file";; + *) . "./$cache_file";; + esac + fi +else + { $as_echo "$as_me:${as_lineno-$LINENO}: creating cache $cache_file" >&5 +$as_echo "$as_me: creating cache $cache_file" >&6;} + >$cache_file +fi + +# Check that the precious variables saved in the cache have kept the same +# value. +ac_cache_corrupted=false +for ac_var in $ac_precious_vars; do + eval ac_old_set=\$ac_cv_env_${ac_var}_set + eval ac_new_set=\$ac_env_${ac_var}_set + eval ac_old_val=\$ac_cv_env_${ac_var}_value + eval ac_new_val=\$ac_env_${ac_var}_value + case $ac_old_set,$ac_new_set in + set,) + { $as_echo "$as_me:${as_lineno-$LINENO}: error: \`$ac_var' was set to \`$ac_old_val' in the previous run" >&5 +$as_echo "$as_me: error: \`$ac_var' was set to \`$ac_old_val' in the previous run" >&2;} + ac_cache_corrupted=: ;; + ,set) + { $as_echo "$as_me:${as_lineno-$LINENO}: error: \`$ac_var' was not set in the previous run" >&5 +$as_echo "$as_me: error: \`$ac_var' was not set in the previous run" >&2;} + ac_cache_corrupted=: ;; + ,);; + *) + if test "x$ac_old_val" != "x$ac_new_val"; then + # differences in whitespace do not lead to failure. + ac_old_val_w=`echo x $ac_old_val` + ac_new_val_w=`echo x $ac_new_val` + if test "$ac_old_val_w" != "$ac_new_val_w"; then + { $as_echo "$as_me:${as_lineno-$LINENO}: error: \`$ac_var' has changed since the previous run:" >&5 +$as_echo "$as_me: error: \`$ac_var' has changed since the previous run:" >&2;} + ac_cache_corrupted=: + else + { $as_echo "$as_me:${as_lineno-$LINENO}: warning: ignoring whitespace changes in \`$ac_var' since the previous run:" >&5 +$as_echo "$as_me: warning: ignoring whitespace changes in \`$ac_var' since the previous run:" >&2;} + eval $ac_var=\$ac_old_val + fi + { $as_echo "$as_me:${as_lineno-$LINENO}: former value: \`$ac_old_val'" >&5 +$as_echo "$as_me: former value: \`$ac_old_val'" >&2;} + { $as_echo "$as_me:${as_lineno-$LINENO}: current value: \`$ac_new_val'" >&5 +$as_echo "$as_me: current value: \`$ac_new_val'" >&2;} + fi;; + esac + # Pass precious variables to config.status. + if test "$ac_new_set" = set; then + case $ac_new_val in + *\'*) ac_arg=$ac_var=`$as_echo "$ac_new_val" | sed "s/'/'\\\\\\\\''/g"` ;; + *) ac_arg=$ac_var=$ac_new_val ;; + esac + case " $ac_configure_args " in + *" '$ac_arg' "*) ;; # Avoid dups. Use of quotes ensures accuracy. + *) as_fn_append ac_configure_args " '$ac_arg'" ;; + esac + fi +done +if $ac_cache_corrupted; then + { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5 +$as_echo "$as_me: error: in \`$ac_pwd':" >&2;} + { $as_echo "$as_me:${as_lineno-$LINENO}: error: changes in the environment can compromise the build" >&5 +$as_echo "$as_me: error: changes in the environment can compromise the build" >&2;} + as_fn_error $? "run \`make distclean' and/or \`rm $cache_file' and start over" "$LINENO" 5 +fi +## -------------------- ## +## Main body of script. ## +## -------------------- ## + +ac_ext=c +ac_cpp='$CPP $CPPFLAGS' +ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5' +ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5' +ac_compiler_gnu=$ac_cv_c_compiler_gnu + + +am__api_version='1.14' + +ac_aux_dir= +for ac_dir in "$srcdir" "$srcdir/.." "$srcdir/../.."; do + if test -f "$ac_dir/install-sh"; then + ac_aux_dir=$ac_dir + ac_install_sh="$ac_aux_dir/install-sh -c" + break + elif test -f "$ac_dir/install.sh"; then + ac_aux_dir=$ac_dir + ac_install_sh="$ac_aux_dir/install.sh -c" + break + elif test -f "$ac_dir/shtool"; then + ac_aux_dir=$ac_dir + ac_install_sh="$ac_aux_dir/shtool install -c" + break + fi +done +if test -z "$ac_aux_dir"; then + as_fn_error $? "cannot find install-sh, install.sh, or shtool in \"$srcdir\" \"$srcdir/..\" \"$srcdir/../..\"" "$LINENO" 5 +fi + +# These three variables are undocumented and unsupported, +# and are intended to be withdrawn in a future Autoconf release. +# They can cause serious problems if a builder's source tree is in a directory +# whose full name contains unusual characters. +ac_config_guess="$SHELL $ac_aux_dir/config.guess" # Please don't use this var. +ac_config_sub="$SHELL $ac_aux_dir/config.sub" # Please don't use this var. +ac_configure="$SHELL $ac_aux_dir/configure" # Please don't use this var. + + +# Find a good install program. We prefer a C program (faster), +# so one script is as good as another. But avoid the broken or +# incompatible versions: +# SysV /etc/install, /usr/sbin/install +# SunOS /usr/etc/install +# IRIX /sbin/install +# AIX /bin/install +# AmigaOS /C/install, which installs bootblocks on floppy discs +# AIX 4 /usr/bin/installbsd, which doesn't work without a -g flag +# AFS /usr/afsws/bin/install, which mishandles nonexistent args +# SVR4 /usr/ucb/install, which tries to use the nonexistent group "staff" +# OS/2's system install, which has a completely different semantic +# ./install, which can be erroneously created by make from ./install.sh. +# Reject install programs that cannot install multiple files. +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for a BSD-compatible install" >&5 +$as_echo_n "checking for a BSD-compatible install... " >&6; } +if test -z "$INSTALL"; then +if ${ac_cv_path_install+:} false; then : + $as_echo_n "(cached) " >&6 +else + as_save_IFS=$IFS; IFS=$PATH_SEPARATOR +for as_dir in $PATH +do + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. + # Account for people who put trailing slashes in PATH elements. +case $as_dir/ in #(( + ./ | .// | /[cC]/* | \ + /etc/* | /usr/sbin/* | /usr/etc/* | /sbin/* | /usr/afsws/bin/* | \ + ?:[\\/]os2[\\/]install[\\/]* | ?:[\\/]OS2[\\/]INSTALL[\\/]* | \ + /usr/ucb/* ) ;; + *) + # OSF1 and SCO ODT 3.0 have their own names for install. + # Don't use installbsd from OSF since it installs stuff as root + # by default. + for ac_prog in ginstall scoinst install; do + for ac_exec_ext in '' $ac_executable_extensions; do + if as_fn_executable_p "$as_dir/$ac_prog$ac_exec_ext"; then + if test $ac_prog = install && + grep dspmsg "$as_dir/$ac_prog$ac_exec_ext" >/dev/null 2>&1; then + # AIX install. It has an incompatible calling convention. + : + elif test $ac_prog = install && + grep pwplus "$as_dir/$ac_prog$ac_exec_ext" >/dev/null 2>&1; then + # program-specific install script used by HP pwplus--don't use. + : + else + rm -rf conftest.one conftest.two conftest.dir + echo one > conftest.one + echo two > conftest.two + mkdir conftest.dir + if "$as_dir/$ac_prog$ac_exec_ext" -c conftest.one conftest.two "`pwd`/conftest.dir" && + test -s conftest.one && test -s conftest.two && + test -s conftest.dir/conftest.one && + test -s conftest.dir/conftest.two + then + ac_cv_path_install="$as_dir/$ac_prog$ac_exec_ext -c" + break 3 + fi + fi + fi + done + done + ;; +esac + + done +IFS=$as_save_IFS + +rm -rf conftest.one conftest.two conftest.dir + +fi + if test "${ac_cv_path_install+set}" = set; then + INSTALL=$ac_cv_path_install + else + # As a last resort, use the slow shell script. Don't cache a + # value for INSTALL within a source directory, because that will + # break other packages using the cache if that directory is + # removed, or if the value is a relative name. + INSTALL=$ac_install_sh + fi +fi +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $INSTALL" >&5 +$as_echo "$INSTALL" >&6; } + +# Use test -z because SunOS4 sh mishandles braces in ${var-val}. +# It thinks the first close brace ends the variable substitution. +test -z "$INSTALL_PROGRAM" && INSTALL_PROGRAM='${INSTALL}' + +test -z "$INSTALL_SCRIPT" && INSTALL_SCRIPT='${INSTALL}' + +test -z "$INSTALL_DATA" && INSTALL_DATA='${INSTALL} -m 644' + +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether build environment is sane" >&5 +$as_echo_n "checking whether build environment is sane... " >&6; } +# Reject unsafe characters in $srcdir or the absolute working directory +# name. Accept space and tab only in the latter. +am_lf=' +' +case `pwd` in + *[\\\"\#\$\&\'\`$am_lf]*) + as_fn_error $? "unsafe absolute working directory name" "$LINENO" 5;; +esac +case $srcdir in + *[\\\"\#\$\&\'\`$am_lf\ \ ]*) + as_fn_error $? "unsafe srcdir value: '$srcdir'" "$LINENO" 5;; +esac + +# Do 'set' in a subshell so we don't clobber the current shell's +# arguments. Must try -L first in case configure is actually a +# symlink; some systems play weird games with the mod time of symlinks +# (eg FreeBSD returns the mod time of the symlink's containing +# directory). +if ( + am_has_slept=no + for am_try in 1 2; do + echo "timestamp, slept: $am_has_slept" > conftest.file + set X `ls -Lt "$srcdir/configure" conftest.file 2> /dev/null` + if test "$*" = "X"; then + # -L didn't work. + set X `ls -t "$srcdir/configure" conftest.file` + fi + if test "$*" != "X $srcdir/configure conftest.file" \ + && test "$*" != "X conftest.file $srcdir/configure"; then + + # If neither matched, then we have a broken ls. This can happen + # if, for instance, CONFIG_SHELL is bash and it inherits a + # broken ls alias from the environment. This has actually + # happened. Such a system could not be considered "sane". + as_fn_error $? "ls -t appears to fail. Make sure there is not a broken + alias in your environment" "$LINENO" 5 + fi + if test "$2" = conftest.file || test $am_try -eq 2; then + break + fi + # Just in case. + sleep 1 + am_has_slept=yes + done + test "$2" = conftest.file + ) +then + # Ok. + : +else + as_fn_error $? "newly created file is older than distributed files! +Check your system clock" "$LINENO" 5 +fi +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: yes" >&5 +$as_echo "yes" >&6; } +# If we didn't sleep, we still need to ensure time stamps of config.status and +# generated files are strictly newer. +am_sleep_pid= +if grep 'slept: no' conftest.file >/dev/null 2>&1; then + ( sleep 1 ) & + am_sleep_pid=$! +fi + +rm -f conftest.file + +test "$program_prefix" != NONE && + program_transform_name="s&^&$program_prefix&;$program_transform_name" +# Use a double $ so make ignores it. +test "$program_suffix" != NONE && + program_transform_name="s&\$&$program_suffix&;$program_transform_name" +# Double any \ or $. +# By default was `s,x,x', remove it if useless. +ac_script='s/[\\$]/&&/g;s/;s,x,x,$//' +program_transform_name=`$as_echo "$program_transform_name" | sed "$ac_script"` + +# expand $ac_aux_dir to an absolute path +am_aux_dir=`cd $ac_aux_dir && pwd` + +if test x"${MISSING+set}" != xset; then + case $am_aux_dir in + *\ * | *\ *) + MISSING="\${SHELL} \"$am_aux_dir/missing\"" ;; + *) + MISSING="\${SHELL} $am_aux_dir/missing" ;; + esac +fi +# Use eval to expand $SHELL +if eval "$MISSING --is-lightweight"; then + am_missing_run="$MISSING " +else + am_missing_run= + { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: 'missing' script is too old or missing" >&5 +$as_echo "$as_me: WARNING: 'missing' script is too old or missing" >&2;} +fi + +if test x"${install_sh}" != xset; then + case $am_aux_dir in + *\ * | *\ *) + install_sh="\${SHELL} '$am_aux_dir/install-sh'" ;; + *) + install_sh="\${SHELL} $am_aux_dir/install-sh" + esac +fi + +# Installed binaries are usually stripped using 'strip' when the user +# run "make install-strip". However 'strip' might not be the right +# tool to use in cross-compilation environments, therefore Automake +# will honor the 'STRIP' environment variable to overrule this program. +if test "$cross_compiling" != no; then + if test -n "$ac_tool_prefix"; then + # Extract the first word of "${ac_tool_prefix}strip", so it can be a program name with args. +set dummy ${ac_tool_prefix}strip; ac_word=$2 +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 +$as_echo_n "checking for $ac_word... " >&6; } +if ${ac_cv_prog_STRIP+:} false; then : + $as_echo_n "(cached) " >&6 +else + if test -n "$STRIP"; then + ac_cv_prog_STRIP="$STRIP" # Let the user override the test. +else +as_save_IFS=$IFS; IFS=$PATH_SEPARATOR +for as_dir in $PATH +do + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. + for ac_exec_ext in '' $ac_executable_extensions; do + if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then + ac_cv_prog_STRIP="${ac_tool_prefix}strip" + $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 + break 2 + fi +done + done +IFS=$as_save_IFS + +fi +fi +STRIP=$ac_cv_prog_STRIP +if test -n "$STRIP"; then + { $as_echo "$as_me:${as_lineno-$LINENO}: result: $STRIP" >&5 +$as_echo "$STRIP" >&6; } +else + { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 +$as_echo "no" >&6; } +fi + + +fi +if test -z "$ac_cv_prog_STRIP"; then + ac_ct_STRIP=$STRIP + # Extract the first word of "strip", so it can be a program name with args. +set dummy strip; ac_word=$2 +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 +$as_echo_n "checking for $ac_word... " >&6; } +if ${ac_cv_prog_ac_ct_STRIP+:} false; then : + $as_echo_n "(cached) " >&6 +else + if test -n "$ac_ct_STRIP"; then + ac_cv_prog_ac_ct_STRIP="$ac_ct_STRIP" # Let the user override the test. +else +as_save_IFS=$IFS; IFS=$PATH_SEPARATOR +for as_dir in $PATH +do + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. + for ac_exec_ext in '' $ac_executable_extensions; do + if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then + ac_cv_prog_ac_ct_STRIP="strip" + $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 + break 2 + fi +done + done +IFS=$as_save_IFS + +fi +fi +ac_ct_STRIP=$ac_cv_prog_ac_ct_STRIP +if test -n "$ac_ct_STRIP"; then + { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_ct_STRIP" >&5 +$as_echo "$ac_ct_STRIP" >&6; } +else + { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 +$as_echo "no" >&6; } +fi + + if test "x$ac_ct_STRIP" = x; then + STRIP=":" + else + case $cross_compiling:$ac_tool_warned in +yes:) +{ $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5 +$as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;} +ac_tool_warned=yes ;; +esac + STRIP=$ac_ct_STRIP + fi +else + STRIP="$ac_cv_prog_STRIP" +fi + +fi +INSTALL_STRIP_PROGRAM="\$(install_sh) -c -s" + +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for a thread-safe mkdir -p" >&5 +$as_echo_n "checking for a thread-safe mkdir -p... " >&6; } +if test -z "$MKDIR_P"; then + if ${ac_cv_path_mkdir+:} false; then : + $as_echo_n "(cached) " >&6 +else + as_save_IFS=$IFS; IFS=$PATH_SEPARATOR +for as_dir in $PATH$PATH_SEPARATOR/opt/sfw/bin +do + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. + for ac_prog in mkdir gmkdir; do + for ac_exec_ext in '' $ac_executable_extensions; do + as_fn_executable_p "$as_dir/$ac_prog$ac_exec_ext" || continue + case `"$as_dir/$ac_prog$ac_exec_ext" --version 2>&1` in #( + 'mkdir (GNU coreutils) '* | \ + 'mkdir (coreutils) '* | \ + 'mkdir (fileutils) '4.1*) + ac_cv_path_mkdir=$as_dir/$ac_prog$ac_exec_ext + break 3;; + esac + done + done + done +IFS=$as_save_IFS + +fi + + test -d ./--version && rmdir ./--version + if test "${ac_cv_path_mkdir+set}" = set; then + MKDIR_P="$ac_cv_path_mkdir -p" + else + # As a last resort, use the slow shell script. Don't cache a + # value for MKDIR_P within a source directory, because that will + # break other packages using the cache if that directory is + # removed, or if the value is a relative name. + MKDIR_P="$ac_install_sh -d" + fi +fi +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $MKDIR_P" >&5 +$as_echo "$MKDIR_P" >&6; } + +for ac_prog in gawk mawk nawk awk +do + # Extract the first word of "$ac_prog", so it can be a program name with args. +set dummy $ac_prog; ac_word=$2 +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 +$as_echo_n "checking for $ac_word... " >&6; } +if ${ac_cv_prog_AWK+:} false; then : + $as_echo_n "(cached) " >&6 +else + if test -n "$AWK"; then + ac_cv_prog_AWK="$AWK" # Let the user override the test. +else +as_save_IFS=$IFS; IFS=$PATH_SEPARATOR +for as_dir in $PATH +do + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. + for ac_exec_ext in '' $ac_executable_extensions; do + if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then + ac_cv_prog_AWK="$ac_prog" + $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 + break 2 + fi +done + done +IFS=$as_save_IFS + +fi +fi +AWK=$ac_cv_prog_AWK +if test -n "$AWK"; then + { $as_echo "$as_me:${as_lineno-$LINENO}: result: $AWK" >&5 +$as_echo "$AWK" >&6; } +else + { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 +$as_echo "no" >&6; } +fi + + + test -n "$AWK" && break +done + +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether ${MAKE-make} sets \$(MAKE)" >&5 +$as_echo_n "checking whether ${MAKE-make} sets \$(MAKE)... " >&6; } +set x ${MAKE-make} +ac_make=`$as_echo "$2" | sed 's/+/p/g; s/[^a-zA-Z0-9_]/_/g'` +if eval \${ac_cv_prog_make_${ac_make}_set+:} false; then : + $as_echo_n "(cached) " >&6 +else + cat >conftest.make <<\_ACEOF +SHELL = /bin/sh +all: + @echo '@@@%%%=$(MAKE)=@@@%%%' +_ACEOF +# GNU make sometimes prints "make[1]: Entering ...", which would confuse us. +case `${MAKE-make} -f conftest.make 2>/dev/null` in + *@@@%%%=?*=@@@%%%*) + eval ac_cv_prog_make_${ac_make}_set=yes;; + *) + eval ac_cv_prog_make_${ac_make}_set=no;; +esac +rm -f conftest.make +fi +if eval test \$ac_cv_prog_make_${ac_make}_set = yes; then + { $as_echo "$as_me:${as_lineno-$LINENO}: result: yes" >&5 +$as_echo "yes" >&6; } + SET_MAKE= +else + { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 +$as_echo "no" >&6; } + SET_MAKE="MAKE=${MAKE-make}" +fi + +rm -rf .tst 2>/dev/null +mkdir .tst 2>/dev/null +if test -d .tst; then + am__leading_dot=. +else + am__leading_dot=_ +fi +rmdir .tst 2>/dev/null + +# Check whether --enable-silent-rules was given. +if test "${enable_silent_rules+set}" = set; then : + enableval=$enable_silent_rules; +fi + +case $enable_silent_rules in # ((( + yes) AM_DEFAULT_VERBOSITY=0;; + no) AM_DEFAULT_VERBOSITY=1;; + *) AM_DEFAULT_VERBOSITY=1;; +esac +am_make=${MAKE-make} +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether $am_make supports nested variables" >&5 +$as_echo_n "checking whether $am_make supports nested variables... " >&6; } +if ${am_cv_make_support_nested_variables+:} false; then : + $as_echo_n "(cached) " >&6 +else + if $as_echo 'TRUE=$(BAR$(V)) +BAR0=false +BAR1=true +V=1 +am__doit: + @$(TRUE) +.PHONY: am__doit' | $am_make -f - >/dev/null 2>&1; then + am_cv_make_support_nested_variables=yes +else + am_cv_make_support_nested_variables=no +fi +fi +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $am_cv_make_support_nested_variables" >&5 +$as_echo "$am_cv_make_support_nested_variables" >&6; } +if test $am_cv_make_support_nested_variables = yes; then + AM_V='$(V)' + AM_DEFAULT_V='$(AM_DEFAULT_VERBOSITY)' +else + AM_V=$AM_DEFAULT_VERBOSITY + AM_DEFAULT_V=$AM_DEFAULT_VERBOSITY +fi +AM_BACKSLASH='\' + +if test "`cd $srcdir && pwd`" != "`pwd`"; then + # Use -I$(srcdir) only when $(srcdir) != ., so that make's output + # is not polluted with repeated "-I." + am__isrc=' -I$(srcdir)' + # test to see if srcdir already configured + if test -f $srcdir/config.status; then + as_fn_error $? "source directory already configured; run \"make distclean\" there first" "$LINENO" 5 + fi +fi + +# test whether we have cygpath +if test -z "$CYGPATH_W"; then + if (cygpath --version) >/dev/null 2>/dev/null; then + CYGPATH_W='cygpath -w' + else + CYGPATH_W=echo + fi +fi + + +# Define the identity of the package. + PACKAGE='autohello' + VERSION='1.1' + + +cat >>confdefs.h <<_ACEOF +#define PACKAGE "$PACKAGE" +_ACEOF + + +cat >>confdefs.h <<_ACEOF +#define VERSION "$VERSION" +_ACEOF + +# Some tools Automake needs. + +ACLOCAL=${ACLOCAL-"${am_missing_run}aclocal-${am__api_version}"} + + +AUTOCONF=${AUTOCONF-"${am_missing_run}autoconf"} + + +AUTOMAKE=${AUTOMAKE-"${am_missing_run}automake-${am__api_version}"} + + +AUTOHEADER=${AUTOHEADER-"${am_missing_run}autoheader"} + + +MAKEINFO=${MAKEINFO-"${am_missing_run}makeinfo"} + +# For better backward compatibility. To be removed once Automake 1.9.x +# dies out for good. For more background, see: +# +# +mkdir_p='$(MKDIR_P)' + +# We need awk for the "check" target. The system "awk" is bad on +# some platforms. +# Always define AMTAR for backward compatibility. Yes, it's still used +# in the wild :-( We should find a proper way to deprecate it ... +AMTAR='$${TAR-tar}' + + +# We'll loop over all known methods to create a tar archive until one works. +_am_tools='gnutar pax cpio none' + +am__tar='$${TAR-tar} chof - "$$tardir"' am__untar='$${TAR-tar} xf -' + + + + + + +# POSIX will say in a future version that running "rm -f" with no argument +# is OK; and we want to be able to make that assumption in our Makefile +# recipes. So use an aggressive probe to check that the usage we want is +# actually supported "in the wild" to an acceptable degree. +# See automake bug#10828. +# To make any issue more visible, cause the running configure to be aborted +# by default if the 'rm' program in use doesn't match our expectations; the +# user can still override this though. +if rm -f && rm -fr && rm -rf; then : OK; else + cat >&2 <<'END' +Oops! + +Your 'rm' program seems unable to run without file operands specified +on the command line, even when the '-f' option is present. This is contrary +to the behaviour of most rm programs out there, and not conforming with +the upcoming POSIX standard: + +Please tell bug-automake@gnu.org about your system, including the value +of your $PATH and any error possibly output before this message. This +can help us improve future automake versions. + +END + if test x"$ACCEPT_INFERIOR_RM_PROGRAM" = x"yes"; then + echo 'Configuration will proceed anyway, since you have set the' >&2 + echo 'ACCEPT_INFERIOR_RM_PROGRAM variable to "yes"' >&2 + echo >&2 + else + cat >&2 <<'END' +Aborting the configuration process, to ensure you take notice of the issue. + +You can download and install GNU coreutils to get an 'rm' implementation +that behaves properly: . + +If you want to complete the configuration process using your problematic +'rm' anyway, export the environment variable ACCEPT_INFERIOR_RM_PROGRAM +to "yes", and re-run configure. + +END + as_fn_error $? "Your 'rm' program is bad, sorry." "$LINENO" 5 + fi +fi + + +ac_config_headers="$ac_config_headers config.h" + + +# Checks for programs. +ac_ext=c +ac_cpp='$CPP $CPPFLAGS' +ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5' +ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5' +ac_compiler_gnu=$ac_cv_c_compiler_gnu +if test -n "$ac_tool_prefix"; then + # Extract the first word of "${ac_tool_prefix}gcc", so it can be a program name with args. +set dummy ${ac_tool_prefix}gcc; ac_word=$2 +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 +$as_echo_n "checking for $ac_word... " >&6; } +if ${ac_cv_prog_CC+:} false; then : + $as_echo_n "(cached) " >&6 +else + if test -n "$CC"; then + ac_cv_prog_CC="$CC" # Let the user override the test. +else +as_save_IFS=$IFS; IFS=$PATH_SEPARATOR +for as_dir in $PATH +do + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. + for ac_exec_ext in '' $ac_executable_extensions; do + if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then + ac_cv_prog_CC="${ac_tool_prefix}gcc" + $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 + break 2 + fi +done + done +IFS=$as_save_IFS + +fi +fi +CC=$ac_cv_prog_CC +if test -n "$CC"; then + { $as_echo "$as_me:${as_lineno-$LINENO}: result: $CC" >&5 +$as_echo "$CC" >&6; } +else + { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 +$as_echo "no" >&6; } +fi + + +fi +if test -z "$ac_cv_prog_CC"; then + ac_ct_CC=$CC + # Extract the first word of "gcc", so it can be a program name with args. +set dummy gcc; ac_word=$2 +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 +$as_echo_n "checking for $ac_word... " >&6; } +if ${ac_cv_prog_ac_ct_CC+:} false; then : + $as_echo_n "(cached) " >&6 +else + if test -n "$ac_ct_CC"; then + ac_cv_prog_ac_ct_CC="$ac_ct_CC" # Let the user override the test. +else +as_save_IFS=$IFS; IFS=$PATH_SEPARATOR +for as_dir in $PATH +do + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. + for ac_exec_ext in '' $ac_executable_extensions; do + if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then + ac_cv_prog_ac_ct_CC="gcc" + $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 + break 2 + fi +done + done +IFS=$as_save_IFS + +fi +fi +ac_ct_CC=$ac_cv_prog_ac_ct_CC +if test -n "$ac_ct_CC"; then + { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_ct_CC" >&5 +$as_echo "$ac_ct_CC" >&6; } +else + { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 +$as_echo "no" >&6; } +fi + + if test "x$ac_ct_CC" = x; then + CC="" + else + case $cross_compiling:$ac_tool_warned in +yes:) +{ $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5 +$as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;} +ac_tool_warned=yes ;; +esac + CC=$ac_ct_CC + fi +else + CC="$ac_cv_prog_CC" +fi + +if test -z "$CC"; then + if test -n "$ac_tool_prefix"; then + # Extract the first word of "${ac_tool_prefix}cc", so it can be a program name with args. +set dummy ${ac_tool_prefix}cc; ac_word=$2 +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 +$as_echo_n "checking for $ac_word... " >&6; } +if ${ac_cv_prog_CC+:} false; then : + $as_echo_n "(cached) " >&6 +else + if test -n "$CC"; then + ac_cv_prog_CC="$CC" # Let the user override the test. +else +as_save_IFS=$IFS; IFS=$PATH_SEPARATOR +for as_dir in $PATH +do + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. + for ac_exec_ext in '' $ac_executable_extensions; do + if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then + ac_cv_prog_CC="${ac_tool_prefix}cc" + $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 + break 2 + fi +done + done +IFS=$as_save_IFS + +fi +fi +CC=$ac_cv_prog_CC +if test -n "$CC"; then + { $as_echo "$as_me:${as_lineno-$LINENO}: result: $CC" >&5 +$as_echo "$CC" >&6; } +else + { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 +$as_echo "no" >&6; } +fi + + + fi +fi +if test -z "$CC"; then + # Extract the first word of "cc", so it can be a program name with args. +set dummy cc; ac_word=$2 +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 +$as_echo_n "checking for $ac_word... " >&6; } +if ${ac_cv_prog_CC+:} false; then : + $as_echo_n "(cached) " >&6 +else + if test -n "$CC"; then + ac_cv_prog_CC="$CC" # Let the user override the test. +else + ac_prog_rejected=no +as_save_IFS=$IFS; IFS=$PATH_SEPARATOR +for as_dir in $PATH +do + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. + for ac_exec_ext in '' $ac_executable_extensions; do + if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then + if test "$as_dir/$ac_word$ac_exec_ext" = "/usr/ucb/cc"; then + ac_prog_rejected=yes + continue + fi + ac_cv_prog_CC="cc" + $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 + break 2 + fi +done + done +IFS=$as_save_IFS + +if test $ac_prog_rejected = yes; then + # We found a bogon in the path, so make sure we never use it. + set dummy $ac_cv_prog_CC + shift + if test $# != 0; then + # We chose a different compiler from the bogus one. + # However, it has the same basename, so the bogon will be chosen + # first if we set CC to just the basename; use the full file name. + shift + ac_cv_prog_CC="$as_dir/$ac_word${1+' '}$@" + fi +fi +fi +fi +CC=$ac_cv_prog_CC +if test -n "$CC"; then + { $as_echo "$as_me:${as_lineno-$LINENO}: result: $CC" >&5 +$as_echo "$CC" >&6; } +else + { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 +$as_echo "no" >&6; } +fi + + +fi +if test -z "$CC"; then + if test -n "$ac_tool_prefix"; then + for ac_prog in cl.exe + do + # Extract the first word of "$ac_tool_prefix$ac_prog", so it can be a program name with args. +set dummy $ac_tool_prefix$ac_prog; ac_word=$2 +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 +$as_echo_n "checking for $ac_word... " >&6; } +if ${ac_cv_prog_CC+:} false; then : + $as_echo_n "(cached) " >&6 +else + if test -n "$CC"; then + ac_cv_prog_CC="$CC" # Let the user override the test. +else +as_save_IFS=$IFS; IFS=$PATH_SEPARATOR +for as_dir in $PATH +do + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. + for ac_exec_ext in '' $ac_executable_extensions; do + if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then + ac_cv_prog_CC="$ac_tool_prefix$ac_prog" + $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 + break 2 + fi +done + done +IFS=$as_save_IFS + +fi +fi +CC=$ac_cv_prog_CC +if test -n "$CC"; then + { $as_echo "$as_me:${as_lineno-$LINENO}: result: $CC" >&5 +$as_echo "$CC" >&6; } +else + { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 +$as_echo "no" >&6; } +fi + + + test -n "$CC" && break + done +fi +if test -z "$CC"; then + ac_ct_CC=$CC + for ac_prog in cl.exe +do + # Extract the first word of "$ac_prog", so it can be a program name with args. +set dummy $ac_prog; ac_word=$2 +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 +$as_echo_n "checking for $ac_word... " >&6; } +if ${ac_cv_prog_ac_ct_CC+:} false; then : + $as_echo_n "(cached) " >&6 +else + if test -n "$ac_ct_CC"; then + ac_cv_prog_ac_ct_CC="$ac_ct_CC" # Let the user override the test. +else +as_save_IFS=$IFS; IFS=$PATH_SEPARATOR +for as_dir in $PATH +do + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. + for ac_exec_ext in '' $ac_executable_extensions; do + if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then + ac_cv_prog_ac_ct_CC="$ac_prog" + $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 + break 2 + fi +done + done +IFS=$as_save_IFS + +fi +fi +ac_ct_CC=$ac_cv_prog_ac_ct_CC +if test -n "$ac_ct_CC"; then + { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_ct_CC" >&5 +$as_echo "$ac_ct_CC" >&6; } +else + { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 +$as_echo "no" >&6; } +fi + + + test -n "$ac_ct_CC" && break +done + + if test "x$ac_ct_CC" = x; then + CC="" + else + case $cross_compiling:$ac_tool_warned in +yes:) +{ $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5 +$as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;} +ac_tool_warned=yes ;; +esac + CC=$ac_ct_CC + fi +fi + +fi + + +test -z "$CC" && { { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5 +$as_echo "$as_me: error: in \`$ac_pwd':" >&2;} +as_fn_error $? "no acceptable C compiler found in \$PATH +See \`config.log' for more details" "$LINENO" 5; } + +# Provide some information about the compiler. +$as_echo "$as_me:${as_lineno-$LINENO}: checking for C compiler version" >&5 +set X $ac_compile +ac_compiler=$2 +for ac_option in --version -v -V -qversion; do + { { ac_try="$ac_compiler $ac_option >&5" +case "(($ac_try" in + *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; + *) ac_try_echo=$ac_try;; +esac +eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\"" +$as_echo "$ac_try_echo"; } >&5 + (eval "$ac_compiler $ac_option >&5") 2>conftest.err + ac_status=$? + if test -s conftest.err; then + sed '10a\ +... rest of stderr output deleted ... + 10q' conftest.err >conftest.er1 + cat conftest.er1 >&5 + fi + rm -f conftest.er1 conftest.err + $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 + test $ac_status = 0; } +done + +cat confdefs.h - <<_ACEOF >conftest.$ac_ext +/* end confdefs.h. */ + +int +main () +{ + + ; + return 0; +} +_ACEOF +ac_clean_files_save=$ac_clean_files +ac_clean_files="$ac_clean_files a.out a.out.dSYM a.exe b.out" +# Try to create an executable without -o first, disregard a.out. +# It will help us diagnose broken compilers, and finding out an intuition +# of exeext. +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether the C compiler works" >&5 +$as_echo_n "checking whether the C compiler works... " >&6; } +ac_link_default=`$as_echo "$ac_link" | sed 's/ -o *conftest[^ ]*//'` + +# The possible output files: +ac_files="a.out conftest.exe conftest a.exe a_out.exe b.out conftest.*" + +ac_rmfiles= +for ac_file in $ac_files +do + case $ac_file in + *.$ac_ext | *.xcoff | *.tds | *.d | *.pdb | *.xSYM | *.bb | *.bbg | *.map | *.inf | *.dSYM | *.o | *.obj ) ;; + * ) ac_rmfiles="$ac_rmfiles $ac_file";; + esac +done +rm -f $ac_rmfiles + +if { { ac_try="$ac_link_default" +case "(($ac_try" in + *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; + *) ac_try_echo=$ac_try;; +esac +eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\"" +$as_echo "$ac_try_echo"; } >&5 + (eval "$ac_link_default") 2>&5 + ac_status=$? + $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 + test $ac_status = 0; }; then : + # Autoconf-2.13 could set the ac_cv_exeext variable to `no'. +# So ignore a value of `no', otherwise this would lead to `EXEEXT = no' +# in a Makefile. We should not override ac_cv_exeext if it was cached, +# so that the user can short-circuit this test for compilers unknown to +# Autoconf. +for ac_file in $ac_files '' +do + test -f "$ac_file" || continue + case $ac_file in + *.$ac_ext | *.xcoff | *.tds | *.d | *.pdb | *.xSYM | *.bb | *.bbg | *.map | *.inf | *.dSYM | *.o | *.obj ) + ;; + [ab].out ) + # We found the default executable, but exeext='' is most + # certainly right. + break;; + *.* ) + if test "${ac_cv_exeext+set}" = set && test "$ac_cv_exeext" != no; + then :; else + ac_cv_exeext=`expr "$ac_file" : '[^.]*\(\..*\)'` + fi + # We set ac_cv_exeext here because the later test for it is not + # safe: cross compilers may not add the suffix if given an `-o' + # argument, so we may need to know it at that point already. + # Even if this section looks crufty: it has the advantage of + # actually working. + break;; + * ) + break;; + esac +done +test "$ac_cv_exeext" = no && ac_cv_exeext= + +else + ac_file='' +fi +if test -z "$ac_file"; then : + { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 +$as_echo "no" >&6; } +$as_echo "$as_me: failed program was:" >&5 +sed 's/^/| /' conftest.$ac_ext >&5 + +{ { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5 +$as_echo "$as_me: error: in \`$ac_pwd':" >&2;} +as_fn_error 77 "C compiler cannot create executables +See \`config.log' for more details" "$LINENO" 5; } +else + { $as_echo "$as_me:${as_lineno-$LINENO}: result: yes" >&5 +$as_echo "yes" >&6; } +fi +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for C compiler default output file name" >&5 +$as_echo_n "checking for C compiler default output file name... " >&6; } +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_file" >&5 +$as_echo "$ac_file" >&6; } +ac_exeext=$ac_cv_exeext + +rm -f -r a.out a.out.dSYM a.exe conftest$ac_cv_exeext b.out +ac_clean_files=$ac_clean_files_save +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for suffix of executables" >&5 +$as_echo_n "checking for suffix of executables... " >&6; } +if { { ac_try="$ac_link" +case "(($ac_try" in + *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; + *) ac_try_echo=$ac_try;; +esac +eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\"" +$as_echo "$ac_try_echo"; } >&5 + (eval "$ac_link") 2>&5 + ac_status=$? + $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 + test $ac_status = 0; }; then : + # If both `conftest.exe' and `conftest' are `present' (well, observable) +# catch `conftest.exe'. For instance with Cygwin, `ls conftest' will +# work properly (i.e., refer to `conftest.exe'), while it won't with +# `rm'. +for ac_file in conftest.exe conftest conftest.*; do + test -f "$ac_file" || continue + case $ac_file in + *.$ac_ext | *.xcoff | *.tds | *.d | *.pdb | *.xSYM | *.bb | *.bbg | *.map | *.inf | *.dSYM | *.o | *.obj ) ;; + *.* ) ac_cv_exeext=`expr "$ac_file" : '[^.]*\(\..*\)'` + break;; + * ) break;; + esac +done +else + { { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5 +$as_echo "$as_me: error: in \`$ac_pwd':" >&2;} +as_fn_error $? "cannot compute suffix of executables: cannot compile and link +See \`config.log' for more details" "$LINENO" 5; } +fi +rm -f conftest conftest$ac_cv_exeext +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_exeext" >&5 +$as_echo "$ac_cv_exeext" >&6; } + +rm -f conftest.$ac_ext +EXEEXT=$ac_cv_exeext +ac_exeext=$EXEEXT +cat confdefs.h - <<_ACEOF >conftest.$ac_ext +/* end confdefs.h. */ +#include +int +main () +{ +FILE *f = fopen ("conftest.out", "w"); + return ferror (f) || fclose (f) != 0; + + ; + return 0; +} +_ACEOF +ac_clean_files="$ac_clean_files conftest.out" +# Check that the compiler produces executables we can run. If not, either +# the compiler is broken, or we cross compile. +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether we are cross compiling" >&5 +$as_echo_n "checking whether we are cross compiling... " >&6; } +if test "$cross_compiling" != yes; then + { { ac_try="$ac_link" +case "(($ac_try" in + *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; + *) ac_try_echo=$ac_try;; +esac +eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\"" +$as_echo "$ac_try_echo"; } >&5 + (eval "$ac_link") 2>&5 + ac_status=$? + $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 + test $ac_status = 0; } + if { ac_try='./conftest$ac_cv_exeext' + { { case "(($ac_try" in + *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; + *) ac_try_echo=$ac_try;; +esac +eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\"" +$as_echo "$ac_try_echo"; } >&5 + (eval "$ac_try") 2>&5 + ac_status=$? + $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 + test $ac_status = 0; }; }; then + cross_compiling=no + else + if test "$cross_compiling" = maybe; then + cross_compiling=yes + else + { { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5 +$as_echo "$as_me: error: in \`$ac_pwd':" >&2;} +as_fn_error $? "cannot run C compiled programs. +If you meant to cross compile, use \`--host'. +See \`config.log' for more details" "$LINENO" 5; } + fi + fi +fi +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $cross_compiling" >&5 +$as_echo "$cross_compiling" >&6; } + +rm -f conftest.$ac_ext conftest$ac_cv_exeext conftest.out +ac_clean_files=$ac_clean_files_save +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for suffix of object files" >&5 +$as_echo_n "checking for suffix of object files... " >&6; } +if ${ac_cv_objext+:} false; then : + $as_echo_n "(cached) " >&6 +else + cat confdefs.h - <<_ACEOF >conftest.$ac_ext +/* end confdefs.h. */ + +int +main () +{ + + ; + return 0; +} +_ACEOF +rm -f conftest.o conftest.obj +if { { ac_try="$ac_compile" +case "(($ac_try" in + *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; + *) ac_try_echo=$ac_try;; +esac +eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\"" +$as_echo "$ac_try_echo"; } >&5 + (eval "$ac_compile") 2>&5 + ac_status=$? + $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 + test $ac_status = 0; }; then : + for ac_file in conftest.o conftest.obj conftest.*; do + test -f "$ac_file" || continue; + case $ac_file in + *.$ac_ext | *.xcoff | *.tds | *.d | *.pdb | *.xSYM | *.bb | *.bbg | *.map | *.inf | *.dSYM ) ;; + *) ac_cv_objext=`expr "$ac_file" : '.*\.\(.*\)'` + break;; + esac +done +else + $as_echo "$as_me: failed program was:" >&5 +sed 's/^/| /' conftest.$ac_ext >&5 + +{ { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5 +$as_echo "$as_me: error: in \`$ac_pwd':" >&2;} +as_fn_error $? "cannot compute suffix of object files: cannot compile +See \`config.log' for more details" "$LINENO" 5; } +fi +rm -f conftest.$ac_cv_objext conftest.$ac_ext +fi +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_objext" >&5 +$as_echo "$ac_cv_objext" >&6; } +OBJEXT=$ac_cv_objext +ac_objext=$OBJEXT +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether we are using the GNU C compiler" >&5 +$as_echo_n "checking whether we are using the GNU C compiler... " >&6; } +if ${ac_cv_c_compiler_gnu+:} false; then : + $as_echo_n "(cached) " >&6 +else + cat confdefs.h - <<_ACEOF >conftest.$ac_ext +/* end confdefs.h. */ + +int +main () +{ +#ifndef __GNUC__ + choke me +#endif + + ; + return 0; +} +_ACEOF +if ac_fn_c_try_compile "$LINENO"; then : + ac_compiler_gnu=yes +else + ac_compiler_gnu=no +fi +rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext +ac_cv_c_compiler_gnu=$ac_compiler_gnu + +fi +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_c_compiler_gnu" >&5 +$as_echo "$ac_cv_c_compiler_gnu" >&6; } +if test $ac_compiler_gnu = yes; then + GCC=yes +else + GCC= +fi +ac_test_CFLAGS=${CFLAGS+set} +ac_save_CFLAGS=$CFLAGS +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether $CC accepts -g" >&5 +$as_echo_n "checking whether $CC accepts -g... " >&6; } +if ${ac_cv_prog_cc_g+:} false; then : + $as_echo_n "(cached) " >&6 +else + ac_save_c_werror_flag=$ac_c_werror_flag + ac_c_werror_flag=yes + ac_cv_prog_cc_g=no + CFLAGS="-g" + cat confdefs.h - <<_ACEOF >conftest.$ac_ext +/* end confdefs.h. */ + +int +main () +{ + + ; + return 0; +} +_ACEOF +if ac_fn_c_try_compile "$LINENO"; then : + ac_cv_prog_cc_g=yes +else + CFLAGS="" + cat confdefs.h - <<_ACEOF >conftest.$ac_ext +/* end confdefs.h. */ + +int +main () +{ + + ; + return 0; +} +_ACEOF +if ac_fn_c_try_compile "$LINENO"; then : + +else + ac_c_werror_flag=$ac_save_c_werror_flag + CFLAGS="-g" + cat confdefs.h - <<_ACEOF >conftest.$ac_ext +/* end confdefs.h. */ + +int +main () +{ + + ; + return 0; +} +_ACEOF +if ac_fn_c_try_compile "$LINENO"; then : + ac_cv_prog_cc_g=yes +fi +rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext +fi +rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext +fi +rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext + ac_c_werror_flag=$ac_save_c_werror_flag +fi +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_prog_cc_g" >&5 +$as_echo "$ac_cv_prog_cc_g" >&6; } +if test "$ac_test_CFLAGS" = set; then + CFLAGS=$ac_save_CFLAGS +elif test $ac_cv_prog_cc_g = yes; then + if test "$GCC" = yes; then + CFLAGS="-g -O2" + else + CFLAGS="-g" + fi +else + if test "$GCC" = yes; then + CFLAGS="-O2" + else + CFLAGS= + fi +fi +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $CC option to accept ISO C89" >&5 +$as_echo_n "checking for $CC option to accept ISO C89... " >&6; } +if ${ac_cv_prog_cc_c89+:} false; then : + $as_echo_n "(cached) " >&6 +else + ac_cv_prog_cc_c89=no +ac_save_CC=$CC +cat confdefs.h - <<_ACEOF >conftest.$ac_ext +/* end confdefs.h. */ +#include +#include +struct stat; +/* Most of the following tests are stolen from RCS 5.7's src/conf.sh. */ +struct buf { int x; }; +FILE * (*rcsopen) (struct buf *, struct stat *, int); +static char *e (p, i) + char **p; + int i; +{ + return p[i]; +} +static char *f (char * (*g) (char **, int), char **p, ...) +{ + char *s; + va_list v; + va_start (v,p); + s = g (p, va_arg (v,int)); + va_end (v); + return s; +} + +/* OSF 4.0 Compaq cc is some sort of almost-ANSI by default. It has + function prototypes and stuff, but not '\xHH' hex character constants. + These don't provoke an error unfortunately, instead are silently treated + as 'x'. The following induces an error, until -std is added to get + proper ANSI mode. Curiously '\x00'!='x' always comes out true, for an + array size at least. It's necessary to write '\x00'==0 to get something + that's true only with -std. */ +int osf4_cc_array ['\x00' == 0 ? 1 : -1]; + +/* IBM C 6 for AIX is almost-ANSI by default, but it replaces macro parameters + inside strings and character constants. */ +#define FOO(x) 'x' +int xlc6_cc_array[FOO(a) == 'x' ? 1 : -1]; + +int test (int i, double x); +struct s1 {int (*f) (int a);}; +struct s2 {int (*f) (double a);}; +int pairnames (int, char **, FILE *(*)(struct buf *, struct stat *, int), int, int); +int argc; +char **argv; +int +main () +{ +return f (e, argv, 0) != argv[0] || f (e, argv, 1) != argv[1]; + ; + return 0; +} +_ACEOF +for ac_arg in '' -qlanglvl=extc89 -qlanglvl=ansi -std \ + -Ae "-Aa -D_HPUX_SOURCE" "-Xc -D__EXTENSIONS__" +do + CC="$ac_save_CC $ac_arg" + if ac_fn_c_try_compile "$LINENO"; then : + ac_cv_prog_cc_c89=$ac_arg +fi +rm -f core conftest.err conftest.$ac_objext + test "x$ac_cv_prog_cc_c89" != "xno" && break +done +rm -f conftest.$ac_ext +CC=$ac_save_CC + +fi +# AC_CACHE_VAL +case "x$ac_cv_prog_cc_c89" in + x) + { $as_echo "$as_me:${as_lineno-$LINENO}: result: none needed" >&5 +$as_echo "none needed" >&6; } ;; + xno) + { $as_echo "$as_me:${as_lineno-$LINENO}: result: unsupported" >&5 +$as_echo "unsupported" >&6; } ;; + *) + CC="$CC $ac_cv_prog_cc_c89" + { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_prog_cc_c89" >&5 +$as_echo "$ac_cv_prog_cc_c89" >&6; } ;; +esac +if test "x$ac_cv_prog_cc_c89" != xno; then : + +fi + +ac_ext=c +ac_cpp='$CPP $CPPFLAGS' +ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5' +ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5' +ac_compiler_gnu=$ac_cv_c_compiler_gnu + +ac_ext=c +ac_cpp='$CPP $CPPFLAGS' +ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5' +ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5' +ac_compiler_gnu=$ac_cv_c_compiler_gnu +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether $CC understands -c and -o together" >&5 +$as_echo_n "checking whether $CC understands -c and -o together... " >&6; } +if ${am_cv_prog_cc_c_o+:} false; then : + $as_echo_n "(cached) " >&6 +else + cat confdefs.h - <<_ACEOF >conftest.$ac_ext +/* end confdefs.h. */ + +int +main () +{ + + ; + return 0; +} +_ACEOF + # Make sure it works both with $CC and with simple cc. + # Following AC_PROG_CC_C_O, we do the test twice because some + # compilers refuse to overwrite an existing .o file with -o, + # though they will create one. + am_cv_prog_cc_c_o=yes + for am_i in 1 2; do + if { echo "$as_me:$LINENO: $CC -c conftest.$ac_ext -o conftest2.$ac_objext" >&5 + ($CC -c conftest.$ac_ext -o conftest2.$ac_objext) >&5 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } \ + && test -f conftest2.$ac_objext; then + : OK + else + am_cv_prog_cc_c_o=no + break + fi + done + rm -f core conftest* + unset am_i +fi +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $am_cv_prog_cc_c_o" >&5 +$as_echo "$am_cv_prog_cc_c_o" >&6; } +if test "$am_cv_prog_cc_c_o" != yes; then + # Losing compiler, so override with the script. + # FIXME: It is wrong to rewrite CC. + # But if we don't then we get into trouble of one sort or another. + # A longer-term fix would be to have automake use am__CC in this case, + # and then we could set am__CC="\$(top_srcdir)/compile \$(CC)" + CC="$am_aux_dir/compile $CC" +fi +ac_ext=c +ac_cpp='$CPP $CPPFLAGS' +ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5' +ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5' +ac_compiler_gnu=$ac_cv_c_compiler_gnu + +DEPDIR="${am__leading_dot}deps" + +ac_config_commands="$ac_config_commands depfiles" + + +am_make=${MAKE-make} +cat > confinc << 'END' +am__doit: + @echo this is the am__doit target +.PHONY: am__doit +END +# If we don't find an include directive, just comment out the code. +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for style of include used by $am_make" >&5 +$as_echo_n "checking for style of include used by $am_make... " >&6; } +am__include="#" +am__quote= +_am_result=none +# First try GNU make style include. +echo "include confinc" > confmf +# Ignore all kinds of additional output from 'make'. +case `$am_make -s -f confmf 2> /dev/null` in #( +*the\ am__doit\ target*) + am__include=include + am__quote= + _am_result=GNU + ;; +esac +# Now try BSD make style include. +if test "$am__include" = "#"; then + echo '.include "confinc"' > confmf + case `$am_make -s -f confmf 2> /dev/null` in #( + *the\ am__doit\ target*) + am__include=.include + am__quote="\"" + _am_result=BSD + ;; + esac +fi + + +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $_am_result" >&5 +$as_echo "$_am_result" >&6; } +rm -f confinc confmf + +# Check whether --enable-dependency-tracking was given. +if test "${enable_dependency_tracking+set}" = set; then : + enableval=$enable_dependency_tracking; +fi + +if test "x$enable_dependency_tracking" != xno; then + am_depcomp="$ac_aux_dir/depcomp" + AMDEPBACKSLASH='\' + am__nodep='_no' +fi + if test "x$enable_dependency_tracking" != xno; then + AMDEP_TRUE= + AMDEP_FALSE='#' +else + AMDEP_TRUE='#' + AMDEP_FALSE= +fi + + + +depcc="$CC" am_compiler_list= + +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking dependency style of $depcc" >&5 +$as_echo_n "checking dependency style of $depcc... " >&6; } +if ${am_cv_CC_dependencies_compiler_type+:} false; then : + $as_echo_n "(cached) " >&6 +else + if test -z "$AMDEP_TRUE" && test -f "$am_depcomp"; then + # We make a subdir and do the tests there. Otherwise we can end up + # making bogus files that we don't know about and never remove. For + # instance it was reported that on HP-UX the gcc test will end up + # making a dummy file named 'D' -- because '-MD' means "put the output + # in D". + rm -rf conftest.dir + mkdir conftest.dir + # Copy depcomp to subdir because otherwise we won't find it if we're + # using a relative directory. + cp "$am_depcomp" conftest.dir + cd conftest.dir + # We will build objects and dependencies in a subdirectory because + # it helps to detect inapplicable dependency modes. For instance + # both Tru64's cc and ICC support -MD to output dependencies as a + # side effect of compilation, but ICC will put the dependencies in + # the current directory while Tru64 will put them in the object + # directory. + mkdir sub + + am_cv_CC_dependencies_compiler_type=none + if test "$am_compiler_list" = ""; then + am_compiler_list=`sed -n 's/^#*\([a-zA-Z0-9]*\))$/\1/p' < ./depcomp` + fi + am__universal=false + case " $depcc " in #( + *\ -arch\ *\ -arch\ *) am__universal=true ;; + esac + + for depmode in $am_compiler_list; do + # Setup a source with many dependencies, because some compilers + # like to wrap large dependency lists on column 80 (with \), and + # we should not choose a depcomp mode which is confused by this. + # + # We need to recreate these files for each test, as the compiler may + # overwrite some of them when testing with obscure command lines. + # This happens at least with the AIX C compiler. + : > sub/conftest.c + for i in 1 2 3 4 5 6; do + echo '#include "conftst'$i'.h"' >> sub/conftest.c + # Using ": > sub/conftst$i.h" creates only sub/conftst1.h with + # Solaris 10 /bin/sh. + echo '/* dummy */' > sub/conftst$i.h + done + echo "${am__include} ${am__quote}sub/conftest.Po${am__quote}" > confmf + + # We check with '-c' and '-o' for the sake of the "dashmstdout" + # mode. It turns out that the SunPro C++ compiler does not properly + # handle '-M -o', and we need to detect this. Also, some Intel + # versions had trouble with output in subdirs. + am__obj=sub/conftest.${OBJEXT-o} + am__minus_obj="-o $am__obj" + case $depmode in + gcc) + # This depmode causes a compiler race in universal mode. + test "$am__universal" = false || continue + ;; + nosideeffect) + # After this tag, mechanisms are not by side-effect, so they'll + # only be used when explicitly requested. + if test "x$enable_dependency_tracking" = xyes; then + continue + else + break + fi + ;; + msvc7 | msvc7msys | msvisualcpp | msvcmsys) + # This compiler won't grok '-c -o', but also, the minuso test has + # not run yet. These depmodes are late enough in the game, and + # so weak that their functioning should not be impacted. + am__obj=conftest.${OBJEXT-o} + am__minus_obj= + ;; + none) break ;; + esac + if depmode=$depmode \ + source=sub/conftest.c object=$am__obj \ + depfile=sub/conftest.Po tmpdepfile=sub/conftest.TPo \ + $SHELL ./depcomp $depcc -c $am__minus_obj sub/conftest.c \ + >/dev/null 2>conftest.err && + grep sub/conftst1.h sub/conftest.Po > /dev/null 2>&1 && + grep sub/conftst6.h sub/conftest.Po > /dev/null 2>&1 && + grep $am__obj sub/conftest.Po > /dev/null 2>&1 && + ${MAKE-make} -s -f confmf > /dev/null 2>&1; then + # icc doesn't choke on unknown options, it will just issue warnings + # or remarks (even with -Werror). So we grep stderr for any message + # that says an option was ignored or not supported. + # When given -MP, icc 7.0 and 7.1 complain thusly: + # icc: Command line warning: ignoring option '-M'; no argument required + # The diagnosis changed in icc 8.0: + # icc: Command line remark: option '-MP' not supported + if (grep 'ignoring option' conftest.err || + grep 'not supported' conftest.err) >/dev/null 2>&1; then :; else + am_cv_CC_dependencies_compiler_type=$depmode + break + fi + fi + done + + cd .. + rm -rf conftest.dir +else + am_cv_CC_dependencies_compiler_type=none +fi + +fi +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $am_cv_CC_dependencies_compiler_type" >&5 +$as_echo "$am_cv_CC_dependencies_compiler_type" >&6; } +CCDEPMODE=depmode=$am_cv_CC_dependencies_compiler_type + + if + test "x$enable_dependency_tracking" != xno \ + && test "$am_cv_CC_dependencies_compiler_type" = gcc3; then + am__fastdepCC_TRUE= + am__fastdepCC_FALSE='#' +else + am__fastdepCC_TRUE='#' + am__fastdepCC_FALSE= +fi + + + + + +# Checks for libraries. + +# Checks for header files. + +# Checks for typedefs, structures, and compiler characteristics. + +# Checks for library functions. + +ac_config_files="$ac_config_files Makefile" + +cat >confcache <<\_ACEOF +# This file is a shell script that caches the results of configure +# tests run on this system so they can be shared between configure +# scripts and configure runs, see configure's option --config-cache. +# It is not useful on other systems. If it contains results you don't +# want to keep, you may remove or edit it. +# +# config.status only pays attention to the cache file if you give it +# the --recheck option to rerun configure. +# +# `ac_cv_env_foo' variables (set or unset) will be overridden when +# loading this file, other *unset* `ac_cv_foo' will be assigned the +# following values. + +_ACEOF + +# The following way of writing the cache mishandles newlines in values, +# but we know of no workaround that is simple, portable, and efficient. +# So, we kill variables containing newlines. +# Ultrix sh set writes to stderr and can't be redirected directly, +# and sets the high bit in the cache file unless we assign to the vars. +( + for ac_var in `(set) 2>&1 | sed -n 's/^\([a-zA-Z_][a-zA-Z0-9_]*\)=.*/\1/p'`; do + eval ac_val=\$$ac_var + case $ac_val in #( + *${as_nl}*) + case $ac_var in #( + *_cv_*) { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: cache variable $ac_var contains a newline" >&5 +$as_echo "$as_me: WARNING: cache variable $ac_var contains a newline" >&2;} ;; + esac + case $ac_var in #( + _ | IFS | as_nl) ;; #( + BASH_ARGV | BASH_SOURCE) eval $ac_var= ;; #( + *) { eval $ac_var=; unset $ac_var;} ;; + esac ;; + esac + done + + (set) 2>&1 | + case $as_nl`(ac_space=' '; set) 2>&1` in #( + *${as_nl}ac_space=\ *) + # `set' does not quote correctly, so add quotes: double-quote + # substitution turns \\\\ into \\, and sed turns \\ into \. + sed -n \ + "s/'/'\\\\''/g; + s/^\\([_$as_cr_alnum]*_cv_[_$as_cr_alnum]*\\)=\\(.*\\)/\\1='\\2'/p" + ;; #( + *) + # `set' quotes correctly as required by POSIX, so do not add quotes. + sed -n "/^[_$as_cr_alnum]*_cv_[_$as_cr_alnum]*=/p" + ;; + esac | + sort +) | + sed ' + /^ac_cv_env_/b end + t clear + :clear + s/^\([^=]*\)=\(.*[{}].*\)$/test "${\1+set}" = set || &/ + t end + s/^\([^=]*\)=\(.*\)$/\1=${\1=\2}/ + :end' >>confcache +if diff "$cache_file" confcache >/dev/null 2>&1; then :; else + if test -w "$cache_file"; then + if test "x$cache_file" != "x/dev/null"; then + { $as_echo "$as_me:${as_lineno-$LINENO}: updating cache $cache_file" >&5 +$as_echo "$as_me: updating cache $cache_file" >&6;} + if test ! -f "$cache_file" || test -h "$cache_file"; then + cat confcache >"$cache_file" + else + case $cache_file in #( + */* | ?:*) + mv -f confcache "$cache_file"$$ && + mv -f "$cache_file"$$ "$cache_file" ;; #( + *) + mv -f confcache "$cache_file" ;; + esac + fi + fi + else + { $as_echo "$as_me:${as_lineno-$LINENO}: not updating unwritable cache $cache_file" >&5 +$as_echo "$as_me: not updating unwritable cache $cache_file" >&6;} + fi +fi +rm -f confcache + +test "x$prefix" = xNONE && prefix=$ac_default_prefix +# Let make expand exec_prefix. +test "x$exec_prefix" = xNONE && exec_prefix='${prefix}' + +DEFS=-DHAVE_CONFIG_H + +ac_libobjs= +ac_ltlibobjs= +U= +for ac_i in : $LIBOBJS; do test "x$ac_i" = x: && continue + # 1. Remove the extension, and $U if already installed. + ac_script='s/\$U\././;s/\.o$//;s/\.obj$//' + ac_i=`$as_echo "$ac_i" | sed "$ac_script"` + # 2. Prepend LIBOBJDIR. When used with automake>=1.10 LIBOBJDIR + # will be set to the directory where LIBOBJS objects are built. + as_fn_append ac_libobjs " \${LIBOBJDIR}$ac_i\$U.$ac_objext" + as_fn_append ac_ltlibobjs " \${LIBOBJDIR}$ac_i"'$U.lo' +done +LIBOBJS=$ac_libobjs + +LTLIBOBJS=$ac_ltlibobjs + + +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking that generated files are newer than configure" >&5 +$as_echo_n "checking that generated files are newer than configure... " >&6; } + if test -n "$am_sleep_pid"; then + # Hide warnings about reused PIDs. + wait $am_sleep_pid 2>/dev/null + fi + { $as_echo "$as_me:${as_lineno-$LINENO}: result: done" >&5 +$as_echo "done" >&6; } + if test -n "$EXEEXT"; then + am__EXEEXT_TRUE= + am__EXEEXT_FALSE='#' +else + am__EXEEXT_TRUE='#' + am__EXEEXT_FALSE= +fi + +if test -z "${AMDEP_TRUE}" && test -z "${AMDEP_FALSE}"; then + as_fn_error $? "conditional \"AMDEP\" was never defined. +Usually this means the macro was only invoked conditionally." "$LINENO" 5 +fi +if test -z "${am__fastdepCC_TRUE}" && test -z "${am__fastdepCC_FALSE}"; then + as_fn_error $? "conditional \"am__fastdepCC\" was never defined. +Usually this means the macro was only invoked conditionally." "$LINENO" 5 +fi + +: "${CONFIG_STATUS=./config.status}" +ac_write_fail=0 +ac_clean_files_save=$ac_clean_files +ac_clean_files="$ac_clean_files $CONFIG_STATUS" +{ $as_echo "$as_me:${as_lineno-$LINENO}: creating $CONFIG_STATUS" >&5 +$as_echo "$as_me: creating $CONFIG_STATUS" >&6;} +as_write_fail=0 +cat >$CONFIG_STATUS <<_ASEOF || as_write_fail=1 +#! $SHELL +# Generated by $as_me. +# Run this file to recreate the current configuration. +# Compiler output produced by configure, useful for debugging +# configure, is in config.log if it exists. + +debug=false +ac_cs_recheck=false +ac_cs_silent=false + +SHELL=\${CONFIG_SHELL-$SHELL} +export SHELL +_ASEOF +cat >>$CONFIG_STATUS <<\_ASEOF || as_write_fail=1 +## -------------------- ## +## M4sh Initialization. ## +## -------------------- ## + +# Be more Bourne compatible +DUALCASE=1; export DUALCASE # for MKS sh +if test -n "${ZSH_VERSION+set}" && (emulate sh) >/dev/null 2>&1; then : + emulate sh + NULLCMD=: + # Pre-4.2 versions of Zsh do word splitting on ${1+"$@"}, which + # is contrary to our usage. Disable this feature. + alias -g '${1+"$@"}'='"$@"' + setopt NO_GLOB_SUBST +else + case `(set -o) 2>/dev/null` in #( + *posix*) : + set -o posix ;; #( + *) : + ;; +esac +fi + + +as_nl=' +' +export as_nl +# Printing a long string crashes Solaris 7 /usr/bin/printf. +as_echo='\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\' +as_echo=$as_echo$as_echo$as_echo$as_echo$as_echo +as_echo=$as_echo$as_echo$as_echo$as_echo$as_echo$as_echo +# Prefer a ksh shell builtin over an external printf program on Solaris, +# but without wasting forks for bash or zsh. +if test -z "$BASH_VERSION$ZSH_VERSION" \ + && (test "X`print -r -- $as_echo`" = "X$as_echo") 2>/dev/null; then + as_echo='print -r --' + as_echo_n='print -rn --' +elif (test "X`printf %s $as_echo`" = "X$as_echo") 2>/dev/null; then + as_echo='printf %s\n' + as_echo_n='printf %s' +else + if test "X`(/usr/ucb/echo -n -n $as_echo) 2>/dev/null`" = "X-n $as_echo"; then + as_echo_body='eval /usr/ucb/echo -n "$1$as_nl"' + as_echo_n='/usr/ucb/echo -n' + else + as_echo_body='eval expr "X$1" : "X\\(.*\\)"' + as_echo_n_body='eval + arg=$1; + case $arg in #( + *"$as_nl"*) + expr "X$arg" : "X\\(.*\\)$as_nl"; + arg=`expr "X$arg" : ".*$as_nl\\(.*\\)"`;; + esac; + expr "X$arg" : "X\\(.*\\)" | tr -d "$as_nl" + ' + export as_echo_n_body + as_echo_n='sh -c $as_echo_n_body as_echo' + fi + export as_echo_body + as_echo='sh -c $as_echo_body as_echo' +fi + +# The user is always right. +if test "${PATH_SEPARATOR+set}" != set; then + PATH_SEPARATOR=: + (PATH='/bin;/bin'; FPATH=$PATH; sh -c :) >/dev/null 2>&1 && { + (PATH='/bin:/bin'; FPATH=$PATH; sh -c :) >/dev/null 2>&1 || + PATH_SEPARATOR=';' + } +fi + + +# IFS +# We need space, tab and new line, in precisely that order. Quoting is +# there to prevent editors from complaining about space-tab. +# (If _AS_PATH_WALK were called with IFS unset, it would disable word +# splitting by setting IFS to empty value.) +IFS=" "" $as_nl" + +# Find who we are. Look in the path if we contain no directory separator. +as_myself= +case $0 in #(( + *[\\/]* ) as_myself=$0 ;; + *) as_save_IFS=$IFS; IFS=$PATH_SEPARATOR +for as_dir in $PATH +do + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. + test -r "$as_dir/$0" && as_myself=$as_dir/$0 && break + done +IFS=$as_save_IFS + + ;; +esac +# We did not find ourselves, most probably we were run as `sh COMMAND' +# in which case we are not to be found in the path. +if test "x$as_myself" = x; then + as_myself=$0 +fi +if test ! -f "$as_myself"; then + $as_echo "$as_myself: error: cannot find myself; rerun with an absolute file name" >&2 + exit 1 +fi + +# Unset variables that we do not need and which cause bugs (e.g. in +# pre-3.0 UWIN ksh). But do not cause bugs in bash 2.01; the "|| exit 1" +# suppresses any "Segmentation fault" message there. '((' could +# trigger a bug in pdksh 5.2.14. +for as_var in BASH_ENV ENV MAIL MAILPATH +do eval test x\${$as_var+set} = xset \ + && ( (unset $as_var) || exit 1) >/dev/null 2>&1 && unset $as_var || : +done +PS1='$ ' +PS2='> ' +PS4='+ ' + +# NLS nuisances. +LC_ALL=C +export LC_ALL +LANGUAGE=C +export LANGUAGE + +# CDPATH. +(unset CDPATH) >/dev/null 2>&1 && unset CDPATH + + +# as_fn_error STATUS ERROR [LINENO LOG_FD] +# ---------------------------------------- +# Output "`basename $0`: error: ERROR" to stderr. If LINENO and LOG_FD are +# provided, also output the error to LOG_FD, referencing LINENO. Then exit the +# script with STATUS, using 1 if that was 0. +as_fn_error () +{ + as_status=$1; test $as_status -eq 0 && as_status=1 + if test "$4"; then + as_lineno=${as_lineno-"$3"} as_lineno_stack=as_lineno_stack=$as_lineno_stack + $as_echo "$as_me:${as_lineno-$LINENO}: error: $2" >&$4 + fi + $as_echo "$as_me: error: $2" >&2 + as_fn_exit $as_status +} # as_fn_error + + +# as_fn_set_status STATUS +# ----------------------- +# Set $? to STATUS, without forking. +as_fn_set_status () +{ + return $1 +} # as_fn_set_status + +# as_fn_exit STATUS +# ----------------- +# Exit the shell with STATUS, even in a "trap 0" or "set -e" context. +as_fn_exit () +{ + set +e + as_fn_set_status $1 + exit $1 +} # as_fn_exit + +# as_fn_unset VAR +# --------------- +# Portably unset VAR. +as_fn_unset () +{ + { eval $1=; unset $1;} +} +as_unset=as_fn_unset +# as_fn_append VAR VALUE +# ---------------------- +# Append the text in VALUE to the end of the definition contained in VAR. Take +# advantage of any shell optimizations that allow amortized linear growth over +# repeated appends, instead of the typical quadratic growth present in naive +# implementations. +if (eval "as_var=1; as_var+=2; test x\$as_var = x12") 2>/dev/null; then : + eval 'as_fn_append () + { + eval $1+=\$2 + }' +else + as_fn_append () + { + eval $1=\$$1\$2 + } +fi # as_fn_append + +# as_fn_arith ARG... +# ------------------ +# Perform arithmetic evaluation on the ARGs, and store the result in the +# global $as_val. Take advantage of shells that can avoid forks. The arguments +# must be portable across $(()) and expr. +if (eval "test \$(( 1 + 1 )) = 2") 2>/dev/null; then : + eval 'as_fn_arith () + { + as_val=$(( $* )) + }' +else + as_fn_arith () + { + as_val=`expr "$@" || test $? -eq 1` + } +fi # as_fn_arith + + +if expr a : '\(a\)' >/dev/null 2>&1 && + test "X`expr 00001 : '.*\(...\)'`" = X001; then + as_expr=expr +else + as_expr=false +fi + +if (basename -- /) >/dev/null 2>&1 && test "X`basename -- / 2>&1`" = "X/"; then + as_basename=basename +else + as_basename=false +fi + +if (as_dir=`dirname -- /` && test "X$as_dir" = X/) >/dev/null 2>&1; then + as_dirname=dirname +else + as_dirname=false +fi + +as_me=`$as_basename -- "$0" || +$as_expr X/"$0" : '.*/\([^/][^/]*\)/*$' \| \ + X"$0" : 'X\(//\)$' \| \ + X"$0" : 'X\(/\)' \| . 2>/dev/null || +$as_echo X/"$0" | + sed '/^.*\/\([^/][^/]*\)\/*$/{ + s//\1/ + q + } + /^X\/\(\/\/\)$/{ + s//\1/ + q + } + /^X\/\(\/\).*/{ + s//\1/ + q + } + s/.*/./; q'` + +# Avoid depending upon Character Ranges. +as_cr_letters='abcdefghijklmnopqrstuvwxyz' +as_cr_LETTERS='ABCDEFGHIJKLMNOPQRSTUVWXYZ' +as_cr_Letters=$as_cr_letters$as_cr_LETTERS +as_cr_digits='0123456789' +as_cr_alnum=$as_cr_Letters$as_cr_digits + +ECHO_C= ECHO_N= ECHO_T= +case `echo -n x` in #((((( +-n*) + case `echo 'xy\c'` in + *c*) ECHO_T=' ';; # ECHO_T is single tab character. + xy) ECHO_C='\c';; + *) echo `echo ksh88 bug on AIX 6.1` > /dev/null + ECHO_T=' ';; + esac;; +*) + ECHO_N='-n';; +esac + +rm -f conf$$ conf$$.exe conf$$.file +if test -d conf$$.dir; then + rm -f conf$$.dir/conf$$.file +else + rm -f conf$$.dir + mkdir conf$$.dir 2>/dev/null +fi +if (echo >conf$$.file) 2>/dev/null; then + if ln -s conf$$.file conf$$ 2>/dev/null; then + as_ln_s='ln -s' + # ... but there are two gotchas: + # 1) On MSYS, both `ln -s file dir' and `ln file dir' fail. + # 2) DJGPP < 2.04 has no symlinks; `ln -s' creates a wrapper executable. + # In both cases, we have to default to `cp -pR'. + ln -s conf$$.file conf$$.dir 2>/dev/null && test ! -f conf$$.exe || + as_ln_s='cp -pR' + elif ln conf$$.file conf$$ 2>/dev/null; then + as_ln_s=ln + else + as_ln_s='cp -pR' + fi +else + as_ln_s='cp -pR' +fi +rm -f conf$$ conf$$.exe conf$$.dir/conf$$.file conf$$.file +rmdir conf$$.dir 2>/dev/null + + +# as_fn_mkdir_p +# ------------- +# Create "$as_dir" as a directory, including parents if necessary. +as_fn_mkdir_p () +{ + + case $as_dir in #( + -*) as_dir=./$as_dir;; + esac + test -d "$as_dir" || eval $as_mkdir_p || { + as_dirs= + while :; do + case $as_dir in #( + *\'*) as_qdir=`$as_echo "$as_dir" | sed "s/'/'\\\\\\\\''/g"`;; #'( + *) as_qdir=$as_dir;; + esac + as_dirs="'$as_qdir' $as_dirs" + as_dir=`$as_dirname -- "$as_dir" || +$as_expr X"$as_dir" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \ + X"$as_dir" : 'X\(//\)[^/]' \| \ + X"$as_dir" : 'X\(//\)$' \| \ + X"$as_dir" : 'X\(/\)' \| . 2>/dev/null || +$as_echo X"$as_dir" | + sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ + s//\1/ + q + } + /^X\(\/\/\)[^/].*/{ + s//\1/ + q + } + /^X\(\/\/\)$/{ + s//\1/ + q + } + /^X\(\/\).*/{ + s//\1/ + q + } + s/.*/./; q'` + test -d "$as_dir" && break + done + test -z "$as_dirs" || eval "mkdir $as_dirs" + } || test -d "$as_dir" || as_fn_error $? "cannot create directory $as_dir" + + +} # as_fn_mkdir_p +if mkdir -p . 2>/dev/null; then + as_mkdir_p='mkdir -p "$as_dir"' +else + test -d ./-p && rmdir ./-p + as_mkdir_p=false +fi + + +# as_fn_executable_p FILE +# ----------------------- +# Test if FILE is an executable regular file. +as_fn_executable_p () +{ + test -f "$1" && test -x "$1" +} # as_fn_executable_p +as_test_x='test -x' +as_executable_p=as_fn_executable_p + +# Sed expression to map a string onto a valid CPP name. +as_tr_cpp="eval sed 'y%*$as_cr_letters%P$as_cr_LETTERS%;s%[^_$as_cr_alnum]%_%g'" + +# Sed expression to map a string onto a valid variable name. +as_tr_sh="eval sed 'y%*+%pp%;s%[^_$as_cr_alnum]%_%g'" + + +exec 6>&1 +## ----------------------------------- ## +## Main body of $CONFIG_STATUS script. ## +## ----------------------------------- ## +_ASEOF +test $as_write_fail = 0 && chmod +x $CONFIG_STATUS || ac_write_fail=1 + +cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1 +# Save the log message, to keep $0 and so on meaningful, and to +# report actual input values of CONFIG_FILES etc. instead of their +# values after options handling. +ac_log=" +This file was extended by autohello $as_me 1.1, which was +generated by GNU Autoconf 2.69. Invocation command line was + + CONFIG_FILES = $CONFIG_FILES + CONFIG_HEADERS = $CONFIG_HEADERS + CONFIG_LINKS = $CONFIG_LINKS + CONFIG_COMMANDS = $CONFIG_COMMANDS + $ $0 $@ + +on `(hostname || uname -n) 2>/dev/null | sed 1q` +" + +_ACEOF + +case $ac_config_files in *" +"*) set x $ac_config_files; shift; ac_config_files=$*;; +esac + +case $ac_config_headers in *" +"*) set x $ac_config_headers; shift; ac_config_headers=$*;; +esac + + +cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1 +# Files that config.status was made for. +config_files="$ac_config_files" +config_headers="$ac_config_headers" +config_commands="$ac_config_commands" + +_ACEOF + +cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1 +ac_cs_usage="\ +\`$as_me' instantiates files and other configuration actions +from templates according to the current configuration. Unless the files +and actions are specified as TAGs, all are instantiated by default. + +Usage: $0 [OPTION]... [TAG]... + + -h, --help print this help, then exit + -V, --version print version number and configuration settings, then exit + --config print configuration, then exit + -q, --quiet, --silent + do not print progress messages + -d, --debug don't remove temporary files + --recheck update $as_me by reconfiguring in the same conditions + --file=FILE[:TEMPLATE] + instantiate the configuration file FILE + --header=FILE[:TEMPLATE] + instantiate the configuration header FILE + +Configuration files: +$config_files + +Configuration headers: +$config_headers + +Configuration commands: +$config_commands + +Report bugs to ." + +_ACEOF +cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1 +ac_cs_config="`$as_echo "$ac_configure_args" | sed 's/^ //; s/[\\""\`\$]/\\\\&/g'`" +ac_cs_version="\\ +autohello config.status 1.1 +configured by $0, generated by GNU Autoconf 2.69, + with options \\"\$ac_cs_config\\" + +Copyright (C) 2012 Free Software Foundation, Inc. +This config.status script is free software; the Free Software Foundation +gives unlimited permission to copy, distribute and modify it." + +ac_pwd='$ac_pwd' +srcdir='$srcdir' +INSTALL='$INSTALL' +MKDIR_P='$MKDIR_P' +AWK='$AWK' +test -n "\$AWK" || AWK=awk +_ACEOF + +cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1 +# The default lists apply if the user does not specify any file. +ac_need_defaults=: +while test $# != 0 +do + case $1 in + --*=?*) + ac_option=`expr "X$1" : 'X\([^=]*\)='` + ac_optarg=`expr "X$1" : 'X[^=]*=\(.*\)'` + ac_shift=: + ;; + --*=) + ac_option=`expr "X$1" : 'X\([^=]*\)='` + ac_optarg= + ac_shift=: + ;; + *) + ac_option=$1 + ac_optarg=$2 + ac_shift=shift + ;; + esac + + case $ac_option in + # Handling of the options. + -recheck | --recheck | --rechec | --reche | --rech | --rec | --re | --r) + ac_cs_recheck=: ;; + --version | --versio | --versi | --vers | --ver | --ve | --v | -V ) + $as_echo "$ac_cs_version"; exit ;; + --config | --confi | --conf | --con | --co | --c ) + $as_echo "$ac_cs_config"; exit ;; + --debug | --debu | --deb | --de | --d | -d ) + debug=: ;; + --file | --fil | --fi | --f ) + $ac_shift + case $ac_optarg in + *\'*) ac_optarg=`$as_echo "$ac_optarg" | sed "s/'/'\\\\\\\\''/g"` ;; + '') as_fn_error $? "missing file argument" ;; + esac + as_fn_append CONFIG_FILES " '$ac_optarg'" + ac_need_defaults=false;; + --header | --heade | --head | --hea ) + $ac_shift + case $ac_optarg in + *\'*) ac_optarg=`$as_echo "$ac_optarg" | sed "s/'/'\\\\\\\\''/g"` ;; + esac + as_fn_append CONFIG_HEADERS " '$ac_optarg'" + ac_need_defaults=false;; + --he | --h) + # Conflict between --help and --header + as_fn_error $? "ambiguous option: \`$1' +Try \`$0 --help' for more information.";; + --help | --hel | -h ) + $as_echo "$ac_cs_usage"; exit ;; + -q | -quiet | --quiet | --quie | --qui | --qu | --q \ + | -silent | --silent | --silen | --sile | --sil | --si | --s) + ac_cs_silent=: ;; + + # This is an error. + -*) as_fn_error $? "unrecognized option: \`$1' +Try \`$0 --help' for more information." ;; + + *) as_fn_append ac_config_targets " $1" + ac_need_defaults=false ;; + + esac + shift +done + +ac_configure_extra_args= + +if $ac_cs_silent; then + exec 6>/dev/null + ac_configure_extra_args="$ac_configure_extra_args --silent" +fi + +_ACEOF +cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1 +if \$ac_cs_recheck; then + set X $SHELL '$0' $ac_configure_args \$ac_configure_extra_args --no-create --no-recursion + shift + \$as_echo "running CONFIG_SHELL=$SHELL \$*" >&6 + CONFIG_SHELL='$SHELL' + export CONFIG_SHELL + exec "\$@" +fi + +_ACEOF +cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1 +exec 5>>config.log +{ + echo + sed 'h;s/./-/g;s/^.../## /;s/...$/ ##/;p;x;p;x' <<_ASBOX +## Running $as_me. ## +_ASBOX + $as_echo "$ac_log" +} >&5 + +_ACEOF +cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1 +# +# INIT-COMMANDS +# +AMDEP_TRUE="$AMDEP_TRUE" ac_aux_dir="$ac_aux_dir" + +_ACEOF + +cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1 + +# Handling of arguments. +for ac_config_target in $ac_config_targets +do + case $ac_config_target in + "config.h") CONFIG_HEADERS="$CONFIG_HEADERS config.h" ;; + "depfiles") CONFIG_COMMANDS="$CONFIG_COMMANDS depfiles" ;; + "Makefile") CONFIG_FILES="$CONFIG_FILES Makefile" ;; + + *) as_fn_error $? "invalid argument: \`$ac_config_target'" "$LINENO" 5;; + esac +done + + +# If the user did not use the arguments to specify the items to instantiate, +# then the envvar interface is used. Set only those that are not. +# We use the long form for the default assignment because of an extremely +# bizarre bug on SunOS 4.1.3. +if $ac_need_defaults; then + test "${CONFIG_FILES+set}" = set || CONFIG_FILES=$config_files + test "${CONFIG_HEADERS+set}" = set || CONFIG_HEADERS=$config_headers + test "${CONFIG_COMMANDS+set}" = set || CONFIG_COMMANDS=$config_commands +fi + +# Have a temporary directory for convenience. Make it in the build tree +# simply because there is no reason against having it here, and in addition, +# creating and moving files from /tmp can sometimes cause problems. +# Hook for its removal unless debugging. +# Note that there is a small window in which the directory will not be cleaned: +# after its creation but before its name has been assigned to `$tmp'. +$debug || +{ + tmp= ac_tmp= + trap 'exit_status=$? + : "${ac_tmp:=$tmp}" + { test ! -d "$ac_tmp" || rm -fr "$ac_tmp"; } && exit $exit_status +' 0 + trap 'as_fn_exit 1' 1 2 13 15 +} +# Create a (secure) tmp directory for tmp files. + +{ + tmp=`(umask 077 && mktemp -d "./confXXXXXX") 2>/dev/null` && + test -d "$tmp" +} || +{ + tmp=./conf$$-$RANDOM + (umask 077 && mkdir "$tmp") +} || as_fn_error $? "cannot create a temporary directory in ." "$LINENO" 5 +ac_tmp=$tmp + +# Set up the scripts for CONFIG_FILES section. +# No need to generate them if there are no CONFIG_FILES. +# This happens for instance with `./config.status config.h'. +if test -n "$CONFIG_FILES"; then + + +ac_cr=`echo X | tr X '\015'` +# On cygwin, bash can eat \r inside `` if the user requested igncr. +# But we know of no other shell where ac_cr would be empty at this +# point, so we can use a bashism as a fallback. +if test "x$ac_cr" = x; then + eval ac_cr=\$\'\\r\' +fi +ac_cs_awk_cr=`$AWK 'BEGIN { print "a\rb" }' /dev/null` +if test "$ac_cs_awk_cr" = "a${ac_cr}b"; then + ac_cs_awk_cr='\\r' +else + ac_cs_awk_cr=$ac_cr +fi + +echo 'BEGIN {' >"$ac_tmp/subs1.awk" && +_ACEOF + + +{ + echo "cat >conf$$subs.awk <<_ACEOF" && + echo "$ac_subst_vars" | sed 's/.*/&!$&$ac_delim/' && + echo "_ACEOF" +} >conf$$subs.sh || + as_fn_error $? "could not make $CONFIG_STATUS" "$LINENO" 5 +ac_delim_num=`echo "$ac_subst_vars" | grep -c '^'` +ac_delim='%!_!# ' +for ac_last_try in false false false false false :; do + . ./conf$$subs.sh || + as_fn_error $? "could not make $CONFIG_STATUS" "$LINENO" 5 + + ac_delim_n=`sed -n "s/.*$ac_delim\$/X/p" conf$$subs.awk | grep -c X` + if test $ac_delim_n = $ac_delim_num; then + break + elif $ac_last_try; then + as_fn_error $? "could not make $CONFIG_STATUS" "$LINENO" 5 + else + ac_delim="$ac_delim!$ac_delim _$ac_delim!! " + fi +done +rm -f conf$$subs.sh + +cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1 +cat >>"\$ac_tmp/subs1.awk" <<\\_ACAWK && +_ACEOF +sed -n ' +h +s/^/S["/; s/!.*/"]=/ +p +g +s/^[^!]*!// +:repl +t repl +s/'"$ac_delim"'$// +t delim +:nl +h +s/\(.\{148\}\)..*/\1/ +t more1 +s/["\\]/\\&/g; s/^/"/; s/$/\\n"\\/ +p +n +b repl +:more1 +s/["\\]/\\&/g; s/^/"/; s/$/"\\/ +p +g +s/.\{148\}// +t nl +:delim +h +s/\(.\{148\}\)..*/\1/ +t more2 +s/["\\]/\\&/g; s/^/"/; s/$/"/ +p +b +:more2 +s/["\\]/\\&/g; s/^/"/; s/$/"\\/ +p +g +s/.\{148\}// +t delim +' >$CONFIG_STATUS || ac_write_fail=1 +rm -f conf$$subs.awk +cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1 +_ACAWK +cat >>"\$ac_tmp/subs1.awk" <<_ACAWK && + for (key in S) S_is_set[key] = 1 + FS = "" + +} +{ + line = $ 0 + nfields = split(line, field, "@") + substed = 0 + len = length(field[1]) + for (i = 2; i < nfields; i++) { + key = field[i] + keylen = length(key) + if (S_is_set[key]) { + value = S[key] + line = substr(line, 1, len) "" value "" substr(line, len + keylen + 3) + len += length(value) + length(field[++i]) + substed = 1 + } else + len += 1 + keylen + } + + print line +} + +_ACAWK +_ACEOF +cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1 +if sed "s/$ac_cr//" < /dev/null > /dev/null 2>&1; then + sed "s/$ac_cr\$//; s/$ac_cr/$ac_cs_awk_cr/g" +else + cat +fi < "$ac_tmp/subs1.awk" > "$ac_tmp/subs.awk" \ + || as_fn_error $? "could not setup config files machinery" "$LINENO" 5 +_ACEOF + +# VPATH may cause trouble with some makes, so we remove sole $(srcdir), +# ${srcdir} and @srcdir@ entries from VPATH if srcdir is ".", strip leading and +# trailing colons and then remove the whole line if VPATH becomes empty +# (actually we leave an empty line to preserve line numbers). +if test "x$srcdir" = x.; then + ac_vpsub='/^[ ]*VPATH[ ]*=[ ]*/{ +h +s/// +s/^/:/ +s/[ ]*$/:/ +s/:\$(srcdir):/:/g +s/:\${srcdir}:/:/g +s/:@srcdir@:/:/g +s/^:*// +s/:*$// +x +s/\(=[ ]*\).*/\1/ +G +s/\n// +s/^[^=]*=[ ]*$// +}' +fi + +cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1 +fi # test -n "$CONFIG_FILES" + +# Set up the scripts for CONFIG_HEADERS section. +# No need to generate them if there are no CONFIG_HEADERS. +# This happens for instance with `./config.status Makefile'. +if test -n "$CONFIG_HEADERS"; then +cat >"$ac_tmp/defines.awk" <<\_ACAWK || +BEGIN { +_ACEOF + +# Transform confdefs.h into an awk script `defines.awk', embedded as +# here-document in config.status, that substitutes the proper values into +# config.h.in to produce config.h. + +# Create a delimiter string that does not exist in confdefs.h, to ease +# handling of long lines. +ac_delim='%!_!# ' +for ac_last_try in false false :; do + ac_tt=`sed -n "/$ac_delim/p" confdefs.h` + if test -z "$ac_tt"; then + break + elif $ac_last_try; then + as_fn_error $? "could not make $CONFIG_HEADERS" "$LINENO" 5 + else + ac_delim="$ac_delim!$ac_delim _$ac_delim!! " + fi +done + +# For the awk script, D is an array of macro values keyed by name, +# likewise P contains macro parameters if any. Preserve backslash +# newline sequences. + +ac_word_re=[_$as_cr_Letters][_$as_cr_alnum]* +sed -n ' +s/.\{148\}/&'"$ac_delim"'/g +t rset +:rset +s/^[ ]*#[ ]*define[ ][ ]*/ / +t def +d +:def +s/\\$// +t bsnl +s/["\\]/\\&/g +s/^ \('"$ac_word_re"'\)\(([^()]*)\)[ ]*\(.*\)/P["\1"]="\2"\ +D["\1"]=" \3"/p +s/^ \('"$ac_word_re"'\)[ ]*\(.*\)/D["\1"]=" \2"/p +d +:bsnl +s/["\\]/\\&/g +s/^ \('"$ac_word_re"'\)\(([^()]*)\)[ ]*\(.*\)/P["\1"]="\2"\ +D["\1"]=" \3\\\\\\n"\\/p +t cont +s/^ \('"$ac_word_re"'\)[ ]*\(.*\)/D["\1"]=" \2\\\\\\n"\\/p +t cont +d +:cont +n +s/.\{148\}/&'"$ac_delim"'/g +t clear +:clear +s/\\$// +t bsnlc +s/["\\]/\\&/g; s/^/"/; s/$/"/p +d +:bsnlc +s/["\\]/\\&/g; s/^/"/; s/$/\\\\\\n"\\/p +b cont +' >$CONFIG_STATUS || ac_write_fail=1 + +cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1 + for (key in D) D_is_set[key] = 1 + FS = "" +} +/^[\t ]*#[\t ]*(define|undef)[\t ]+$ac_word_re([\t (]|\$)/ { + line = \$ 0 + split(line, arg, " ") + if (arg[1] == "#") { + defundef = arg[2] + mac1 = arg[3] + } else { + defundef = substr(arg[1], 2) + mac1 = arg[2] + } + split(mac1, mac2, "(") #) + macro = mac2[1] + prefix = substr(line, 1, index(line, defundef) - 1) + if (D_is_set[macro]) { + # Preserve the white space surrounding the "#". + print prefix "define", macro P[macro] D[macro] + next + } else { + # Replace #undef with comments. This is necessary, for example, + # in the case of _POSIX_SOURCE, which is predefined and required + # on some systems where configure will not decide to define it. + if (defundef == "undef") { + print "/*", prefix defundef, macro, "*/" + next + } + } +} +{ print } +_ACAWK +_ACEOF +cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1 + as_fn_error $? "could not setup config headers machinery" "$LINENO" 5 +fi # test -n "$CONFIG_HEADERS" + + +eval set X " :F $CONFIG_FILES :H $CONFIG_HEADERS :C $CONFIG_COMMANDS" +shift +for ac_tag +do + case $ac_tag in + :[FHLC]) ac_mode=$ac_tag; continue;; + esac + case $ac_mode$ac_tag in + :[FHL]*:*);; + :L* | :C*:*) as_fn_error $? "invalid tag \`$ac_tag'" "$LINENO" 5;; + :[FH]-) ac_tag=-:-;; + :[FH]*) ac_tag=$ac_tag:$ac_tag.in;; + esac + ac_save_IFS=$IFS + IFS=: + set x $ac_tag + IFS=$ac_save_IFS + shift + ac_file=$1 + shift + + case $ac_mode in + :L) ac_source=$1;; + :[FH]) + ac_file_inputs= + for ac_f + do + case $ac_f in + -) ac_f="$ac_tmp/stdin";; + *) # Look for the file first in the build tree, then in the source tree + # (if the path is not absolute). The absolute path cannot be DOS-style, + # because $ac_f cannot contain `:'. + test -f "$ac_f" || + case $ac_f in + [\\/$]*) false;; + *) test -f "$srcdir/$ac_f" && ac_f="$srcdir/$ac_f";; + esac || + as_fn_error 1 "cannot find input file: \`$ac_f'" "$LINENO" 5;; + esac + case $ac_f in *\'*) ac_f=`$as_echo "$ac_f" | sed "s/'/'\\\\\\\\''/g"`;; esac + as_fn_append ac_file_inputs " '$ac_f'" + done + + # Let's still pretend it is `configure' which instantiates (i.e., don't + # use $as_me), people would be surprised to read: + # /* config.h. Generated by config.status. */ + configure_input='Generated from '` + $as_echo "$*" | sed 's|^[^:]*/||;s|:[^:]*/|, |g' + `' by configure.' + if test x"$ac_file" != x-; then + configure_input="$ac_file. $configure_input" + { $as_echo "$as_me:${as_lineno-$LINENO}: creating $ac_file" >&5 +$as_echo "$as_me: creating $ac_file" >&6;} + fi + # Neutralize special characters interpreted by sed in replacement strings. + case $configure_input in #( + *\&* | *\|* | *\\* ) + ac_sed_conf_input=`$as_echo "$configure_input" | + sed 's/[\\\\&|]/\\\\&/g'`;; #( + *) ac_sed_conf_input=$configure_input;; + esac + + case $ac_tag in + *:-:* | *:-) cat >"$ac_tmp/stdin" \ + || as_fn_error $? "could not create $ac_file" "$LINENO" 5 ;; + esac + ;; + esac + + ac_dir=`$as_dirname -- "$ac_file" || +$as_expr X"$ac_file" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \ + X"$ac_file" : 'X\(//\)[^/]' \| \ + X"$ac_file" : 'X\(//\)$' \| \ + X"$ac_file" : 'X\(/\)' \| . 2>/dev/null || +$as_echo X"$ac_file" | + sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ + s//\1/ + q + } + /^X\(\/\/\)[^/].*/{ + s//\1/ + q + } + /^X\(\/\/\)$/{ + s//\1/ + q + } + /^X\(\/\).*/{ + s//\1/ + q + } + s/.*/./; q'` + as_dir="$ac_dir"; as_fn_mkdir_p + ac_builddir=. + +case "$ac_dir" in +.) ac_dir_suffix= ac_top_builddir_sub=. ac_top_build_prefix= ;; +*) + ac_dir_suffix=/`$as_echo "$ac_dir" | sed 's|^\.[\\/]||'` + # A ".." for each directory in $ac_dir_suffix. + ac_top_builddir_sub=`$as_echo "$ac_dir_suffix" | sed 's|/[^\\/]*|/..|g;s|/||'` + case $ac_top_builddir_sub in + "") ac_top_builddir_sub=. ac_top_build_prefix= ;; + *) ac_top_build_prefix=$ac_top_builddir_sub/ ;; + esac ;; +esac +ac_abs_top_builddir=$ac_pwd +ac_abs_builddir=$ac_pwd$ac_dir_suffix +# for backward compatibility: +ac_top_builddir=$ac_top_build_prefix + +case $srcdir in + .) # We are building in place. + ac_srcdir=. + ac_top_srcdir=$ac_top_builddir_sub + ac_abs_top_srcdir=$ac_pwd ;; + [\\/]* | ?:[\\/]* ) # Absolute name. + ac_srcdir=$srcdir$ac_dir_suffix; + ac_top_srcdir=$srcdir + ac_abs_top_srcdir=$srcdir ;; + *) # Relative name. + ac_srcdir=$ac_top_build_prefix$srcdir$ac_dir_suffix + ac_top_srcdir=$ac_top_build_prefix$srcdir + ac_abs_top_srcdir=$ac_pwd/$srcdir ;; +esac +ac_abs_srcdir=$ac_abs_top_srcdir$ac_dir_suffix + + + case $ac_mode in + :F) + # + # CONFIG_FILE + # + + case $INSTALL in + [\\/$]* | ?:[\\/]* ) ac_INSTALL=$INSTALL ;; + *) ac_INSTALL=$ac_top_build_prefix$INSTALL ;; + esac + ac_MKDIR_P=$MKDIR_P + case $MKDIR_P in + [\\/$]* | ?:[\\/]* ) ;; + */*) ac_MKDIR_P=$ac_top_build_prefix$MKDIR_P ;; + esac +_ACEOF + +cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1 +# If the template does not know about datarootdir, expand it. +# FIXME: This hack should be removed a few years after 2.60. +ac_datarootdir_hack=; ac_datarootdir_seen= +ac_sed_dataroot=' +/datarootdir/ { + p + q +} +/@datadir@/p +/@docdir@/p +/@infodir@/p +/@localedir@/p +/@mandir@/p' +case `eval "sed -n \"\$ac_sed_dataroot\" $ac_file_inputs"` in +*datarootdir*) ac_datarootdir_seen=yes;; +*@datadir@*|*@docdir@*|*@infodir@*|*@localedir@*|*@mandir@*) + { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: $ac_file_inputs seems to ignore the --datarootdir setting" >&5 +$as_echo "$as_me: WARNING: $ac_file_inputs seems to ignore the --datarootdir setting" >&2;} +_ACEOF +cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1 + ac_datarootdir_hack=' + s&@datadir@&$datadir&g + s&@docdir@&$docdir&g + s&@infodir@&$infodir&g + s&@localedir@&$localedir&g + s&@mandir@&$mandir&g + s&\\\${datarootdir}&$datarootdir&g' ;; +esac +_ACEOF + +# Neutralize VPATH when `$srcdir' = `.'. +# Shell code in configure.ac might set extrasub. +# FIXME: do we really want to maintain this feature? +cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1 +ac_sed_extra="$ac_vpsub +$extrasub +_ACEOF +cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1 +:t +/@[a-zA-Z_][a-zA-Z_0-9]*@/!b +s|@configure_input@|$ac_sed_conf_input|;t t +s&@top_builddir@&$ac_top_builddir_sub&;t t +s&@top_build_prefix@&$ac_top_build_prefix&;t t +s&@srcdir@&$ac_srcdir&;t t +s&@abs_srcdir@&$ac_abs_srcdir&;t t +s&@top_srcdir@&$ac_top_srcdir&;t t +s&@abs_top_srcdir@&$ac_abs_top_srcdir&;t t +s&@builddir@&$ac_builddir&;t t +s&@abs_builddir@&$ac_abs_builddir&;t t +s&@abs_top_builddir@&$ac_abs_top_builddir&;t t +s&@INSTALL@&$ac_INSTALL&;t t +s&@MKDIR_P@&$ac_MKDIR_P&;t t +$ac_datarootdir_hack +" +eval sed \"\$ac_sed_extra\" "$ac_file_inputs" | $AWK -f "$ac_tmp/subs.awk" \ + >$ac_tmp/out || as_fn_error $? "could not create $ac_file" "$LINENO" 5 + +test -z "$ac_datarootdir_hack$ac_datarootdir_seen" && + { ac_out=`sed -n '/\${datarootdir}/p' "$ac_tmp/out"`; test -n "$ac_out"; } && + { ac_out=`sed -n '/^[ ]*datarootdir[ ]*:*=/p' \ + "$ac_tmp/out"`; test -z "$ac_out"; } && + { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: $ac_file contains a reference to the variable \`datarootdir' +which seems to be undefined. Please make sure it is defined" >&5 +$as_echo "$as_me: WARNING: $ac_file contains a reference to the variable \`datarootdir' +which seems to be undefined. Please make sure it is defined" >&2;} + + rm -f "$ac_tmp/stdin" + case $ac_file in + -) cat "$ac_tmp/out" && rm -f "$ac_tmp/out";; + *) rm -f "$ac_file" && mv "$ac_tmp/out" "$ac_file";; + esac \ + || as_fn_error $? "could not create $ac_file" "$LINENO" 5 + ;; + :H) + # + # CONFIG_HEADER + # + if test x"$ac_file" != x-; then + { + $as_echo "/* $configure_input */" \ + && eval '$AWK -f "$ac_tmp/defines.awk"' "$ac_file_inputs" + } >"$ac_tmp/config.h" \ + || as_fn_error $? "could not create $ac_file" "$LINENO" 5 + if diff "$ac_file" "$ac_tmp/config.h" >/dev/null 2>&1; then + { $as_echo "$as_me:${as_lineno-$LINENO}: $ac_file is unchanged" >&5 +$as_echo "$as_me: $ac_file is unchanged" >&6;} + else + rm -f "$ac_file" + mv "$ac_tmp/config.h" "$ac_file" \ + || as_fn_error $? "could not create $ac_file" "$LINENO" 5 + fi + else + $as_echo "/* $configure_input */" \ + && eval '$AWK -f "$ac_tmp/defines.awk"' "$ac_file_inputs" \ + || as_fn_error $? "could not create -" "$LINENO" 5 + fi +# Compute "$ac_file"'s index in $config_headers. +_am_arg="$ac_file" +_am_stamp_count=1 +for _am_header in $config_headers :; do + case $_am_header in + $_am_arg | $_am_arg:* ) + break ;; + * ) + _am_stamp_count=`expr $_am_stamp_count + 1` ;; + esac +done +echo "timestamp for $_am_arg" >`$as_dirname -- "$_am_arg" || +$as_expr X"$_am_arg" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \ + X"$_am_arg" : 'X\(//\)[^/]' \| \ + X"$_am_arg" : 'X\(//\)$' \| \ + X"$_am_arg" : 'X\(/\)' \| . 2>/dev/null || +$as_echo X"$_am_arg" | + sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ + s//\1/ + q + } + /^X\(\/\/\)[^/].*/{ + s//\1/ + q + } + /^X\(\/\/\)$/{ + s//\1/ + q + } + /^X\(\/\).*/{ + s//\1/ + q + } + s/.*/./; q'`/stamp-h$_am_stamp_count + ;; + + :C) { $as_echo "$as_me:${as_lineno-$LINENO}: executing $ac_file commands" >&5 +$as_echo "$as_me: executing $ac_file commands" >&6;} + ;; + esac + + + case $ac_file$ac_mode in + "depfiles":C) test x"$AMDEP_TRUE" != x"" || { + # Older Autoconf quotes --file arguments for eval, but not when files + # are listed without --file. Let's play safe and only enable the eval + # if we detect the quoting. + case $CONFIG_FILES in + *\'*) eval set x "$CONFIG_FILES" ;; + *) set x $CONFIG_FILES ;; + esac + shift + for mf + do + # Strip MF so we end up with the name of the file. + mf=`echo "$mf" | sed -e 's/:.*$//'` + # Check whether this is an Automake generated Makefile or not. + # We used to match only the files named 'Makefile.in', but + # some people rename them; so instead we look at the file content. + # Grep'ing the first line is not enough: some people post-process + # each Makefile.in and add a new line on top of each file to say so. + # Grep'ing the whole file is not good either: AIX grep has a line + # limit of 2048, but all sed's we know have understand at least 4000. + if sed -n 's,^#.*generated by automake.*,X,p' "$mf" | grep X >/dev/null 2>&1; then + dirpart=`$as_dirname -- "$mf" || +$as_expr X"$mf" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \ + X"$mf" : 'X\(//\)[^/]' \| \ + X"$mf" : 'X\(//\)$' \| \ + X"$mf" : 'X\(/\)' \| . 2>/dev/null || +$as_echo X"$mf" | + sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ + s//\1/ + q + } + /^X\(\/\/\)[^/].*/{ + s//\1/ + q + } + /^X\(\/\/\)$/{ + s//\1/ + q + } + /^X\(\/\).*/{ + s//\1/ + q + } + s/.*/./; q'` + else + continue + fi + # Extract the definition of DEPDIR, am__include, and am__quote + # from the Makefile without running 'make'. + DEPDIR=`sed -n 's/^DEPDIR = //p' < "$mf"` + test -z "$DEPDIR" && continue + am__include=`sed -n 's/^am__include = //p' < "$mf"` + test -z "$am__include" && continue + am__quote=`sed -n 's/^am__quote = //p' < "$mf"` + # Find all dependency output files, they are included files with + # $(DEPDIR) in their names. We invoke sed twice because it is the + # simplest approach to changing $(DEPDIR) to its actual value in the + # expansion. + for file in `sed -n " + s/^$am__include $am__quote\(.*(DEPDIR).*\)$am__quote"'$/\1/p' <"$mf" | \ + sed -e 's/\$(DEPDIR)/'"$DEPDIR"'/g'`; do + # Make sure the directory exists. + test -f "$dirpart/$file" && continue + fdir=`$as_dirname -- "$file" || +$as_expr X"$file" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \ + X"$file" : 'X\(//\)[^/]' \| \ + X"$file" : 'X\(//\)$' \| \ + X"$file" : 'X\(/\)' \| . 2>/dev/null || +$as_echo X"$file" | + sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ + s//\1/ + q + } + /^X\(\/\/\)[^/].*/{ + s//\1/ + q + } + /^X\(\/\/\)$/{ + s//\1/ + q + } + /^X\(\/\).*/{ + s//\1/ + q + } + s/.*/./; q'` + as_dir=$dirpart/$fdir; as_fn_mkdir_p + # echo "creating $dirpart/$file" + echo '# dummy' > "$dirpart/$file" + done + done +} + ;; + + esac +done # for ac_tag + + +as_fn_exit 0 +_ACEOF +ac_clean_files=$ac_clean_files_save + +test $ac_write_fail = 0 || + as_fn_error $? "write failure creating $CONFIG_STATUS" "$LINENO" 5 + + +# configure is writing to config.log, and then calls config.status. +# config.status does its own redirection, appending to config.log. +# Unfortunately, on DOS this fails, as config.log is still kept open +# by configure, so config.status won't be able to write to it; its +# output is simply discarded. So we exec the FD to /dev/null, +# effectively closing config.log, so it can be properly (re)opened and +# appended to by config.status. When coming back to configure, we +# need to make the FD available again. +if test "$no_create" != yes; then + ac_cs_success=: + ac_config_status_args= + test "$silent" = yes && + ac_config_status_args="$ac_config_status_args --quiet" + exec 5>/dev/null + $SHELL $CONFIG_STATUS $ac_config_status_args || ac_cs_success=false + exec 5>>config.log + # Use ||, not &&, to avoid exiting from the if with $? = 1, which + # would make configure fail if this is the last instruction. + $ac_cs_success || as_fn_exit 1 +fi +if test -n "$ac_unrecognized_opts" && test "$enable_option_checking" != no; then + { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: unrecognized options: $ac_unrecognized_opts" >&5 +$as_echo "$as_me: WARNING: unrecognized options: $ac_unrecognized_opts" >&2;} +fi + diff --git a/examples/yocto/meta-mini/recipes-hello/autohello/files/autohello/configure.ac b/examples/yocto/meta-mini/recipes-hello/autohello/files/autohello/configure.ac new file mode 100644 index 0000000..8acdba3 --- /dev/null +++ b/examples/yocto/meta-mini/recipes-hello/autohello/files/autohello/configure.ac @@ -0,0 +1,21 @@ +AC_PREREQ([2.69]) +AC_INIT([autohello], [1.1], [maunt@linutronix.de]) +AM_INIT_AUTOMAKE([silent-rules]) +AC_CONFIG_SRCDIR([autohello.c]) +AC_CONFIG_HEADERS([config.h]) + +# Checks for programs. +AC_PROG_CC +AC_PROG_INSTALL +AM_PROG_CC_C_O + +# Checks for libraries. + +# Checks for header files. + +# Checks for typedefs, structures, and compiler characteristics. + +# Checks for library functions. + +AC_CONFIG_FILES([Makefile]) +AC_OUTPUT diff --git a/examples/yocto/meta-mini/recipes-hello/autohello/files/autohello/configure.scan b/examples/yocto/meta-mini/recipes-hello/autohello/files/autohello/configure.scan new file mode 100644 index 0000000..be0eb9f --- /dev/null +++ b/examples/yocto/meta-mini/recipes-hello/autohello/files/autohello/configure.scan @@ -0,0 +1,21 @@ +# -*- Autoconf -*- +# Process this file with autoconf to produce a configure script. + +AC_PREREQ([2.69]) +AC_INIT([FULL-PACKAGE-NAME], [VERSION], [BUG-REPORT-ADDRESS]) +AC_CONFIG_SRCDIR([autohello.c]) +AC_CONFIG_HEADERS([config.h]) + +# Checks for programs. +AC_PROG_CC + +# Checks for libraries. + +# Checks for header files. + +# Checks for typedefs, structures, and compiler characteristics. + +# Checks for library functions. + +AC_CONFIG_FILES([Makefile]) +AC_OUTPUT diff --git a/examples/yocto/meta-mini/recipes-hello/autohello/files/autohello/depcomp b/examples/yocto/meta-mini/recipes-hello/autohello/files/autohello/depcomp new file mode 120000 index 0000000..a062b8e --- /dev/null +++ b/examples/yocto/meta-mini/recipes-hello/autohello/files/autohello/depcomp @@ -0,0 +1 @@ +/usr/share/automake-1.14/depcomp \ No newline at end of file diff --git a/examples/yocto/meta-mini/recipes-hello/autohello/files/autohello/install-sh b/examples/yocto/meta-mini/recipes-hello/autohello/files/autohello/install-sh new file mode 120000 index 0000000..292a426 --- /dev/null +++ b/examples/yocto/meta-mini/recipes-hello/autohello/files/autohello/install-sh @@ -0,0 +1 @@ +/usr/share/automake-1.14/install-sh \ No newline at end of file diff --git a/examples/yocto/meta-mini/recipes-hello/autohello/files/autohello/missing b/examples/yocto/meta-mini/recipes-hello/autohello/files/autohello/missing new file mode 120000 index 0000000..bc0fe73 --- /dev/null +++ b/examples/yocto/meta-mini/recipes-hello/autohello/files/autohello/missing @@ -0,0 +1 @@ +/usr/share/automake-1.14/missing \ No newline at end of file diff --git a/examples/yocto/meta-mini/recipes-hello/hello/files/hello.c b/examples/yocto/meta-mini/recipes-hello/hello/files/hello.c new file mode 100644 index 0000000..f202e2f --- /dev/null +++ b/examples/yocto/meta-mini/recipes-hello/hello/files/hello.c @@ -0,0 +1,8 @@ +#include + +int main (int argc, char **argv) +{ + printf ("hello yocto world\n"); + + return 0; +} diff --git a/examples/yocto/meta-mini/recipes-hello/hello/hello.bb b/examples/yocto/meta-mini/recipes-hello/hello/hello.bb new file mode 100644 index 0000000..6969b44 --- /dev/null +++ b/examples/yocto/meta-mini/recipes-hello/hello/hello.bb @@ -0,0 +1,18 @@ +DESCRIPTION = "Simple helloworld application" +SECTION = "examples" +LICENSE = "MIT" +LIC_FILES_CHKSUM = "file://${COMMON_LICENSE_DIR}/MIT;md5=0835ade698e0bcf8506ecda2f7b4f302" +PR = "r0" + +SRC_URI = "file://hello.c" + +S = "${WORKDIR}" + +do_compile() { + ${CC} hello.c -o hello +} + +do_install() { + install -d ${D}${bindir} + install -m 0755 hello ${D}${bindir} +} diff --git a/examples/yocto/meta-mini/recipes-hello/hellocm/files/hellocm-0.1.tar.bz2 b/examples/yocto/meta-mini/recipes-hello/hellocm/files/hellocm-0.1.tar.bz2 new file mode 100644 index 0000000..1292ea5 Binary files /dev/null and b/examples/yocto/meta-mini/recipes-hello/hellocm/files/hellocm-0.1.tar.bz2 differ diff --git a/examples/yocto/meta-mini/recipes-hello/hellocm/files/hellocm-0.1/CMakeLists.txt b/examples/yocto/meta-mini/recipes-hello/hellocm/files/hellocm-0.1/CMakeLists.txt new file mode 100644 index 0000000..a811deb --- /dev/null +++ b/examples/yocto/meta-mini/recipes-hello/hellocm/files/hellocm-0.1/CMakeLists.txt @@ -0,0 +1,7 @@ +CMAKE_MINIMUM_REQUIRED (VERSION 2.6) +PROJECT (hellocm) +SET (CPACK_PACKAGE_VERSION_MAJOR "0") +SET (CPACK_PACKAGE_VERSION_MINOR "1") +SET (src ${CMAKE_CURRENT_SOURCE_DIR}/hello.c) +ADD_EXECUTABLE (hellocm ${src}) +INSTALL(TARGETS hellocm RUNTIME DESTINATION bin LIBRARY DESTINATION lib) diff --git a/examples/yocto/meta-mini/recipes-hello/hellocm/files/hellocm-0.1/hello.c b/examples/yocto/meta-mini/recipes-hello/hellocm/files/hellocm-0.1/hello.c new file mode 100644 index 0000000..f202e2f --- /dev/null +++ b/examples/yocto/meta-mini/recipes-hello/hellocm/files/hellocm-0.1/hello.c @@ -0,0 +1,8 @@ +#include + +int main (int argc, char **argv) +{ + printf ("hello yocto world\n"); + + return 0; +} diff --git a/examples/yocto/meta-mini/recipes-hello/hellocm/hellocm_0.1.bb b/examples/yocto/meta-mini/recipes-hello/hellocm/hellocm_0.1.bb new file mode 100644 index 0000000..c87bdec --- /dev/null +++ b/examples/yocto/meta-mini/recipes-hello/hellocm/hellocm_0.1.bb @@ -0,0 +1,10 @@ +DESCRIPTION = "hellocm cmake example" +LICENSE = "MIT" +LIC_FILES_CHKSUM = "file://${COMMON_LICENSE_DIR}/MIT;md5=0835ade698e0bcf8506ecda2f7b4f302" +SECTION = "examples" +SRC_URI = "file://${BPN}-${PV}.tar.bz2;md5=123" +inherit cmake + +#export EXTRA_OECMAKE = '-DBLUBB="bla" + +FILES_{PN} = "${bindir}/hellocm" diff --git a/examples/yocto/meta-mini/recipes-hello/helloqt/files/helloqt-1.0.tar.bz2 b/examples/yocto/meta-mini/recipes-hello/helloqt/files/helloqt-1.0.tar.bz2 new file mode 100644 index 0000000..4ac91e9 Binary files /dev/null and b/examples/yocto/meta-mini/recipes-hello/helloqt/files/helloqt-1.0.tar.bz2 differ diff --git a/examples/yocto/meta-mini/recipes-hello/helloqt/files/helloqt-1.0/helloqt.pro b/examples/yocto/meta-mini/recipes-hello/helloqt/files/helloqt-1.0/helloqt.pro new file mode 100644 index 0000000..c3cfcc0 --- /dev/null +++ b/examples/yocto/meta-mini/recipes-hello/helloqt/files/helloqt-1.0/helloqt.pro @@ -0,0 +1,25 @@ +#------------------------------------------------- +# +# Project created by QtCreator 2013-06-04T20:56:37 +# +#------------------------------------------------- + +QT += core gui + +greaterThan(QT_MAJOR_VERSION, 4): QT += widgets + +TARGET = helloqt +TEMPLATE = app + + +SOURCES += main.cpp\ + mainwindow.cpp + +HEADERS += mainwindow.h + +FORMS += mainwindow.ui + +target.path = /opt/helloqt +target.files = helloqt + +INSTALLS += target diff --git a/examples/yocto/meta-mini/recipes-hello/helloqt/files/helloqt-1.0/main.cpp b/examples/yocto/meta-mini/recipes-hello/helloqt/files/helloqt-1.0/main.cpp new file mode 100644 index 0000000..9e2d83c --- /dev/null +++ b/examples/yocto/meta-mini/recipes-hello/helloqt/files/helloqt-1.0/main.cpp @@ -0,0 +1,11 @@ +#include "mainwindow.h" +#include + +int main(int argc, char *argv[]) +{ + QApplication a(argc, argv); + MainWindow w; + w.show(); + + return a.exec(); +} diff --git a/examples/yocto/meta-mini/recipes-hello/helloqt/files/helloqt-1.0/mainwindow.cpp b/examples/yocto/meta-mini/recipes-hello/helloqt/files/helloqt-1.0/mainwindow.cpp new file mode 100644 index 0000000..49d64fc --- /dev/null +++ b/examples/yocto/meta-mini/recipes-hello/helloqt/files/helloqt-1.0/mainwindow.cpp @@ -0,0 +1,14 @@ +#include "mainwindow.h" +#include "ui_mainwindow.h" + +MainWindow::MainWindow(QWidget *parent) : + QMainWindow(parent), + ui(new Ui::MainWindow) +{ + ui->setupUi(this); +} + +MainWindow::~MainWindow() +{ + delete ui; +} diff --git a/examples/yocto/meta-mini/recipes-hello/helloqt/files/helloqt-1.0/mainwindow.h b/examples/yocto/meta-mini/recipes-hello/helloqt/files/helloqt-1.0/mainwindow.h new file mode 100644 index 0000000..112fda1 --- /dev/null +++ b/examples/yocto/meta-mini/recipes-hello/helloqt/files/helloqt-1.0/mainwindow.h @@ -0,0 +1,22 @@ +#ifndef MAINWINDOW_H +#define MAINWINDOW_H + +#include + +namespace Ui { +class MainWindow; +} + +class MainWindow : public QMainWindow +{ + Q_OBJECT + +public: + explicit MainWindow(QWidget *parent = 0); + ~MainWindow(); + +private: + Ui::MainWindow *ui; +}; + +#endif // MAINWINDOW_H diff --git a/examples/yocto/meta-mini/recipes-hello/helloqt/files/helloqt-1.0/mainwindow.ui b/examples/yocto/meta-mini/recipes-hello/helloqt/files/helloqt-1.0/mainwindow.ui new file mode 100644 index 0000000..6050363 --- /dev/null +++ b/examples/yocto/meta-mini/recipes-hello/helloqt/files/helloqt-1.0/mainwindow.ui @@ -0,0 +1,24 @@ + + MainWindow + + + + 0 + 0 + 400 + 300 + + + + MainWindow + + + + + + + + + + + diff --git a/examples/yocto/meta-mini/recipes-hello/helloqt/helloqt_1.0.bb b/examples/yocto/meta-mini/recipes-hello/helloqt/helloqt_1.0.bb new file mode 100644 index 0000000..e9d7b90 --- /dev/null +++ b/examples/yocto/meta-mini/recipes-hello/helloqt/helloqt_1.0.bb @@ -0,0 +1,14 @@ +DESCRIPTION = "helloqt QT example" +LICENSE = "MIT" +LIC_FILES_CHKSUM = "file://${COMMON_LICENSE_DIR}/MIT;md5=0835ade698e0bcf8506ecda2f7b4f302" +SECTION = "examples" +SRC_URI = "file://${BPN}-${PV}.tar.bz2" + +inherit qt4e + +PR = "r4" + +do_install() { + install -d ${D}${bindir} + install -m 0755 helloqt ${D}${bindir} +} diff --git a/examples/yocto/meta-mini/recipes-kernel/COPYING.MIT b/examples/yocto/meta-mini/recipes-kernel/COPYING.MIT new file mode 100644 index 0000000..89de354 --- /dev/null +++ b/examples/yocto/meta-mini/recipes-kernel/COPYING.MIT @@ -0,0 +1,17 @@ +Permission is hereby granted, free of charge, to any person obtaining a copy +of this software and associated documentation files (the "Software"), to deal +in the Software without restriction, including without limitation the rights +to use, copy, modify, merge, publish, distribute, sublicense, and/or sell +copies of the Software, and to permit persons to whom the Software is +furnished to do so, subject to the following conditions: + +The above copyright notice and this permission notice shall be included in +all copies or substantial portions of the Software. + +THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR +IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, +FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE +AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER +LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, +OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN +THE SOFTWARE. diff --git a/examples/yocto/meta-mini/recipes-kernel/README b/examples/yocto/meta-mini/recipes-kernel/README new file mode 100644 index 0000000..bd9fb9e --- /dev/null +++ b/examples/yocto/meta-mini/recipes-kernel/README @@ -0,0 +1,64 @@ +This README file contains information on the contents of the +mini layer. + +Please see the corresponding sections below for details. + + +Dependencies +============ + +This layer depends on: + + URI: git://git.openembedded.org/bitbake + branch: master + + URI: git://git.openembedded.org/openembedded-core + layers: meta + branch: master + + URI: git://git.yoctoproject.org/xxxx + layers: xxxx + branch: master + + +Patches +======= + +Please submit any patches against the mini layer to the +xxxx mailing list (xxxx@zzzz.org) and cc: the maintainer: + +Maintainer: XXX YYYYYY + + +Table of Contents +================= + + I. Adding the mini layer to your build + II. Misc + + +I. Adding the mini layer to your build +================================================= + +--- replace with specific instructions for the mini layer --- + +In order to use this layer, you need to make the build system aware of +it. + +Assuming the mini layer exists at the top-level of your +yocto build tree, you can add it to the build system by adding the +location of the mini layer to bblayers.conf, along with any +other layers needed. e.g.: + + BBLAYERS ?= " \ + /path/to/yocto/meta \ + /path/to/yocto/meta-yocto \ + /path/to/yocto/meta-yocto-bsp \ + /path/to/yocto/meta-mini \ + " + + +II. Misc +======== + +--- replace with specific information about the mini layer --- diff --git a/examples/yocto/meta-mini/recipes-kernel/classes/fsl-dynamic-packagearch.bbclass b/examples/yocto/meta-mini/recipes-kernel/classes/fsl-dynamic-packagearch.bbclass new file mode 100644 index 0000000..40eae6c --- /dev/null +++ b/examples/yocto/meta-mini/recipes-kernel/classes/fsl-dynamic-packagearch.bbclass @@ -0,0 +1,47 @@ +# Automatically set PACKAGE_ARCH for MACHINE_SOCARCH +# +# This allow to easy reuse of binary packages among similar SoCs. The +# usual use for this is to share SoC specific packages among different +# boards. +# +# MACHINE_SOCARCH_FILTER list all packages associated with +# MACHINE_SOCARCH and, when match, will set PACKAGE_ARCH as MACHINE_SOCARCH +# +# MACHINE_ARCH_FILTER list all packages associated with +# MACHINE_ARCH and, when match, will set PACKAGE_ARCH as MACHINE_ARCH +# +# For example, in meta-fsl-arm, this is used to share GPU packages for +# i.MX53 boards (as all them share the AMD GPU) and i.MX6 based boards +# (as all them share Vivante GPU). +# +# To use the class, specify, for example: +# +# MACHINE_SOCARCH_soc = "${TUNE_PKGARCH}-soc" +# +# and the need filters, as: +# +# MACHINE_ARCH_FILTER = "virtual/kernel" +# MACHINE_SOCARCH_FILTER_soc = "virtual/libgles1 ... virtual/libgl" +# +# Copyright 2013 (C) O.S. Systems Software LTDA. + +python __anonymous () { + machine_arch_filter = set((d.getVar("MACHINE_ARCH_FILTER", True) or "").split()) + machine_socarch_filter = set((d.getVar("MACHINE_SOCARCH_FILTER", True) or "").split()) + if machine_socarch_filter or machine_arch_filter: + provides = set((d.getVar("PROVIDES", True) or "").split()) + depends = set((d.getVar("DEPENDS", True) or "").split()) + PN = d.getVar("PN", True) + + package_arch = None + if list(machine_arch_filter & (provides | depends)): + package_arch = d.getVar("MACHINE_ARCH", True) + elif list(machine_socarch_filter & (provides | depends)): + package_arch = d.getVar("MACHINE_SOCARCH", True) + if not package_arch: + bb.parse.SkipPackage("You must set MACHINE_SOCARCH as MACHINE_SOCARCH_FILTER is set for this SoC.") + + if package_arch: + bb.debug(1, "Use '%s' as package archictecture for '%s'" % (package_arch, PN)) + d.setVar("PACKAGE_ARCH", package_arch) +} diff --git a/examples/yocto/meta-mini/recipes-kernel/classes/image_types_fsl.bbclass b/examples/yocto/meta-mini/recipes-kernel/classes/image_types_fsl.bbclass new file mode 100644 index 0000000..c0fa9b6 --- /dev/null +++ b/examples/yocto/meta-mini/recipes-kernel/classes/image_types_fsl.bbclass @@ -0,0 +1,319 @@ +inherit image_types + +IMAGE_BOOTLOADER ?= "u-boot" + +# Handle u-boot suffixes +UBOOT_SUFFIX ?= "bin" +UBOOT_PADDING ?= "0" +UBOOT_SUFFIX_SDCARD ?= "${UBOOT_SUFFIX}" + +# +# Handles i.MX mxs bootstream generation +# +MXSBOOT_NAND_ARGS ?= "" + +# IMX Bootlets Linux bootstream +IMAGE_DEPENDS_linux.sb = "elftosb-native:do_populate_sysroot \ + imx-bootlets:do_deploy \ + virtual/kernel:do_deploy" +IMAGE_LINK_NAME_linux.sb = "" +IMAGE_CMD_linux.sb () { + kernel_bin="`readlink ${DEPLOY_DIR_IMAGE}/${KERNEL_IMAGETYPE}-${MACHINE}.bin`" + kernel_dtb="`readlink ${DEPLOY_DIR_IMAGE}/${KERNEL_IMAGETYPE}-${MACHINE}.dtb || true`" + linux_bd_file=imx-bootlets-linux.bd-${MACHINE} + if [ `basename $kernel_bin .bin` = `basename $kernel_dtb .dtb` ]; then + # When using device tree we build a zImage with the dtb + # appended on the end of the image + linux_bd_file=imx-bootlets-linux.bd-dtb-${MACHINE} + cat $kernel_bin $kernel_dtb \ + > $kernel_bin-dtb + rm -f ${DEPLOY_DIR_IMAGE}/${KERNEL_IMAGETYPE}-${MACHINE}.bin-dtb + ln -s $kernel_bin-dtb ${DEPLOY_DIR_IMAGE}/${KERNEL_IMAGETYPE}-${MACHINE}.bin-dtb + fi + + # Ensure the file is generated + rm -f ${DEPLOY_DIR_IMAGE}/${IMAGE_NAME}.linux.sb + (cd ${DEPLOY_DIR_IMAGE}; elftosb -z -c $linux_bd_file -o ${IMAGE_NAME}.linux.sb) + + # Remove the appended file as it is only used here + rm -f ${DEPLOY_DIR_IMAGE}/$kernel_bin-dtb +} + +# IMX Bootlets barebox bootstream +IMAGE_DEPENDS_barebox.mxsboot-sdcard = "elftosb-native:do_populate_sysroot \ + u-boot-mxsboot-native:do_populate_sysroot \ + imx-bootlets:do_deploy \ + barebox:do_deploy" +IMAGE_CMD_barebox.mxsboot-sdcard () { + barebox_bd_file=imx-bootlets-barebox_ivt.bd-${MACHINE} + + # Ensure the files are generated + (cd ${DEPLOY_DIR_IMAGE}; rm -f ${IMAGE_NAME}.barebox.sb ${IMAGE_NAME}.barebox.mxsboot-sdcard; \ + elftosb -f mx28 -z -c $barebox_bd_file -o ${IMAGE_NAME}.barebox.sb; \ + mxsboot sd ${IMAGE_NAME}.barebox.sb ${IMAGE_NAME}.barebox.mxsboot-sdcard) +} + +# U-Boot mxsboot generation to SD-Card +UBOOT_SUFFIX_SDCARD_mxs ?= "mxsboot-sdcard" +IMAGE_DEPENDS_uboot.mxsboot-sdcard = "u-boot-mxsboot-native:do_populate_sysroot \ + u-boot:do_deploy" +IMAGE_CMD_uboot.mxsboot-sdcard = "mxsboot sd ${DEPLOY_DIR_IMAGE}/u-boot-${MACHINE}.${UBOOT_SUFFIX} \ + ${DEPLOY_DIR_IMAGE}/${IMAGE_NAME}.rootfs.uboot.mxsboot-sdcard" + +IMAGE_DEPENDS_uboot.mxsboot-nand = "u-boot-mxsboot-native:do_populate_sysroot \ + u-boot:do_deploy" +IMAGE_CMD_uboot.mxsboot-nand = "mxsboot ${MXSBOOT_NAND_ARGS} nand \ + ${DEPLOY_DIR_IMAGE}/u-boot-${MACHINE}.${UBOOT_SUFFIX} \ + ${DEPLOY_DIR_IMAGE}/${IMAGE_NAME}.rootfs.uboot.mxsboot-nand" + +# Boot partition volume id +BOOTDD_VOLUME_ID ?= "Boot ${MACHINE}" + +# Boot partition size [in KiB] +BOOT_SPACE ?= "8192" + +# Barebox environment size [in KiB] +BAREBOX_ENV_SPACE ?= "512" + +# Set alignment to 4MB [in KiB] +IMAGE_ROOTFS_ALIGNMENT = "4096" + +IMAGE_DEPENDS_sdcard = "parted-native:do_populate_sysroot \ + dosfstools-native:do_populate_sysroot \ + mtools-native:do_populate_sysroot \ + virtual/kernel:do_deploy \ + ${@d.getVar('IMAGE_BOOTLOADER', True) and d.getVar('IMAGE_BOOTLOADER', True) + ':do_deploy' or ''}" + +SDCARD = "${DEPLOY_DIR_IMAGE}/${IMAGE_NAME}.rootfs.sdcard" + +SDCARD_GENERATION_COMMAND_mxs = "generate_mxs_sdcard" +SDCARD_GENERATION_COMMAND_mx25 = "generate_imx_sdcard" +SDCARD_GENERATION_COMMAND_mx5 = "generate_imx_sdcard" +SDCARD_GENERATION_COMMAND_mx6 = "generate_imx_sdcard" +SDCARD_GENERATION_COMMAND_vf60 = "generate_imx_sdcard" + +# +# Create an image that can by written onto a SD card using dd for use +# with i.MX SoC family +# +# External variables needed: +# ${SDCARD_ROOTFS} - the rootfs image to incorporate +# ${IMAGE_BOOTLOADER} - bootloader to use {u-boot, barebox} +# +# The disk layout used is: +# +# 0 -> IMAGE_ROOTFS_ALIGNMENT - reserved to bootloader (not partitioned) +# IMAGE_ROOTFS_ALIGNMENT -> BOOT_SPACE - kernel and other data +# BOOT_SPACE -> SDIMG_SIZE - rootfs +# +# Default Free space = 1.3x +# Use IMAGE_OVERHEAD_FACTOR to add more space +# <---------> +# 4MiB 8MiB SDIMG_ROOTFS 4MiB +# <-----------------------> <----------> <----------------------> <------------------------------> +# ------------------------ ------------ ------------------------ ------------------------------- +# | IMAGE_ROOTFS_ALIGNMENT | BOOT_SPACE | ROOTFS_SIZE | IMAGE_ROOTFS_ALIGNMENT | +# ------------------------ ------------ ------------------------ ------------------------------- +# ^ ^ ^ ^ ^ +# | | | | | +# 0 4096 4MiB + 8MiB 4MiB + 8Mib + SDIMG_ROOTFS 4MiB + 8MiB + SDIMG_ROOTFS + 4MiB +generate_imx_sdcard () { + # Create partition table + parted -s ${SDCARD} mklabel msdos + parted -s ${SDCARD} unit KiB mkpart primary fat32 ${IMAGE_ROOTFS_ALIGNMENT} $(expr ${IMAGE_ROOTFS_ALIGNMENT} \+ ${BOOT_SPACE_ALIGNED}) + parted -s ${SDCARD} unit KiB mkpart primary $(expr ${IMAGE_ROOTFS_ALIGNMENT} \+ ${BOOT_SPACE_ALIGNED}) $(expr ${IMAGE_ROOTFS_ALIGNMENT} \+ ${BOOT_SPACE_ALIGNED} \+ $ROOTFS_SIZE) + parted ${SDCARD} print + + # Burn bootloader + case "${IMAGE_BOOTLOADER}" in + imx-bootlets) + bberror "The imx-bootlets is not supported for i.MX based machines" + exit 1 + ;; + u-boot) + if [ -n "${SPL_BINARY}" ]; then + dd if=${DEPLOY_DIR_IMAGE}/${SPL_BINARY} of=${SDCARD} conv=notrunc seek=2 bs=512 + dd if=${DEPLOY_DIR_IMAGE}/u-boot-${MACHINE}.${UBOOT_SUFFIX_SDCARD} of=${SDCARD} conv=notrunc seek=42 bs=1K + else + dd if=${DEPLOY_DIR_IMAGE}/u-boot-${MACHINE}.${UBOOT_SUFFIX_SDCARD} of=${SDCARD} conv=notrunc seek=2 skip=${UBOOT_PADDING} bs=512 + fi + ;; + barebox) + dd if=${DEPLOY_DIR_IMAGE}/barebox-${MACHINE}.bin of=${SDCARD} conv=notrunc seek=1 skip=1 bs=512 + dd if=${DEPLOY_DIR_IMAGE}/bareboxenv-${MACHINE}.bin of=${SDCARD} conv=notrunc seek=1 bs=512k + ;; + "") + ;; + *) + bberror "Unkown IMAGE_BOOTLOADER value" + exit 1 + ;; + esac + + # Create boot partition image + BOOT_BLOCKS=$(LC_ALL=C parted -s ${SDCARD} unit b print \ + | awk '/ 1 / { print substr($4, 1, length($4 -1)) / 1024 }') + mkfs.vfat -n "${BOOTDD_VOLUME_ID}" -S 512 -C ${WORKDIR}/boot.img $BOOT_BLOCKS + mcopy -i ${WORKDIR}/boot.img -s ${DEPLOY_DIR_IMAGE}/${KERNEL_IMAGETYPE}-${MACHINE}.bin ::/${KERNEL_IMAGETYPE} + + # Copy boot scripts + for item in ${BOOT_SCRIPTS}; do + src=`echo $item | awk -F':' '{ print $1 }'` + dst=`echo $item | awk -F':' '{ print $2 }'` + + mcopy -i ${WORKDIR}/boot.img -s ${DEPLOY_DIR_IMAGE}/$src ::/$dst + done + + # Copy device tree file + if test -n "${KERNEL_DEVICETREE}"; then + for DTS_FILE in ${KERNEL_DEVICETREE}; do + DTS_BASE_NAME=`basename ${DTS_FILE} | awk -F "." '{print $1}'` + if [ -e "${KERNEL_IMAGETYPE}-${DTS_BASE_NAME}.dtb" ]; then + kernel_bin="`readlink ${KERNEL_IMAGETYPE}-${MACHINE}.bin`" + kernel_bin_for_dtb="`readlink ${KERNEL_IMAGETYPE}-${DTS_BASE_NAME}.dtb | sed "s,$DTS_BASE_NAME,${MACHINE},g;s,\.dtb$,.bin,g"`" + if [ $kernel_bin = $kernel_bin_for_dtb ]; then + mcopy -i ${WORKDIR}/boot.img -s ${DEPLOY_DIR_IMAGE}/${KERNEL_IMAGETYPE}-${DTS_BASE_NAME}.dtb ::/${DTS_BASE_NAME}.dtb + fi + fi + done + fi + + # Burn Partition + dd if=${WORKDIR}/boot.img of=${SDCARD} conv=notrunc seek=1 bs=$(expr ${IMAGE_ROOTFS_ALIGNMENT} \* 1024) && sync && sync + dd if=${SDCARD_ROOTFS} of=${SDCARD} conv=notrunc seek=1 bs=$(expr ${BOOT_SPACE_ALIGNED} \* 1024 + ${IMAGE_ROOTFS_ALIGNMENT} \* 1024) && sync && sync +} + +# +# Create an image that can by written onto a SD card using dd for use +# with i.MXS SoC family +# +# External variables needed: +# ${SDCARD_ROOTFS} - the rootfs image to incorporate +# ${IMAGE_BOOTLOADER} - bootloader to use {imx-bootlets, u-boot} +# +generate_mxs_sdcard () { + # Create partition table + parted -s ${SDCARD} mklabel msdos + + case "${IMAGE_BOOTLOADER}" in + imx-bootlets) + # The disk layout used is: + # + # 0 -> 1024 - Unused (not partitioned) + # 1024 -> BOOT_SPACE - kernel and other data (bootstream) + # BOOT_SPACE -> SDIMG_SIZE - rootfs + # + # Default Free space = 1.3x + # Use IMAGE_OVERHEAD_FACTOR to add more space + # <---------> + # 1024 8MiB SDIMG_ROOTFS 4MiB + # <-------> <----------> <----------------------> <------------------------------> + # --------------------- ------------------------ ------------------------------- + # | Unused | BOOT_SPACE | ROOTFS_SIZE | IMAGE_ROOTFS_ALIGNMENT | + # --------------------- ------------------------ ------------------------------- + # ^ ^ ^ ^ ^ + # | | | | | + # 0 1024 1024 + 8MiB 1024 + 8Mib + SDIMG_ROOTFS 1024 + 8MiB + SDIMG_ROOTFS + 4MiB + parted -s ${SDCARD} unit KiB mkpart primary 1024 $(expr ${IMAGE_ROOTFS_ALIGNMENT} \+ ${BOOT_SPACE_ALIGNED}) + parted -s ${SDCARD} unit KiB mkpart primary $(expr ${IMAGE_ROOTFS_ALIGNMENT} \+ ${BOOT_SPACE_ALIGNED}) $(expr ${IMAGE_ROOTFS_ALIGNMENT} \+ ${BOOT_SPACE_ALIGNED} \+ $ROOTFS_SIZE) + + # Empty 4 bytes from boot partition + dd if=/dev/zero of=${SDCARD} conv=notrunc seek=2048 count=4 + + # Write the bootstream in (2048 + 4) bytes + dd if=${DEPLOY_DIR_IMAGE}/${IMAGE_NAME}.linux.sb of=${SDCARD} conv=notrunc seek=1 seek=2052 + ;; + u-boot) + # The disk layout used is: + # + # 1M - 2M - reserved to bootloader and other data + # 2M - BOOT_SPACE - kernel + # BOOT_SPACE - SDCARD_SIZE - rootfs + # + # The disk layout used is: + # + # 1M -> 2M - reserved to bootloader and other data + # 2M -> BOOT_SPACE - kernel and other data + # BOOT_SPACE -> SDIMG_SIZE - rootfs + # + # Default Free space = 1.3x + # Use IMAGE_OVERHEAD_FACTOR to add more space + # <---------> + # 4MiB 8MiB SDIMG_ROOTFS 4MiB + # <-----------------------> <-------------> <----------------------> <------------------------------> + # ---------------------------------------- ------------------------ ------------------------------- + # | | | |ROOTFS_SIZE | IMAGE_ROOTFS_ALIGNMENT | + # ---------------------------------------- ------------------------ ------------------------------- + # ^ ^ ^ ^ ^ ^ ^ + # | | | | | | | + # 0 1M 2M 4M 4MiB + BOOTSPACE 4MiB + BOOTSPACE + SDIMG_ROOTFS 4MiB + BOOTSPACE + SDIMG_ROOTFS + 4MiB + # + parted -s ${SDCARD} unit KiB mkpart primary 1024 2048 + parted -s ${SDCARD} unit KiB mkpart primary 2048 $(expr ${IMAGE_ROOTFS_ALIGNMENT} \+ ${BOOT_SPACE_ALIGNED}) + parted -s ${SDCARD} unit KiB mkpart primary $(expr ${IMAGE_ROOTFS_ALIGNMENT} \+ ${BOOT_SPACE_ALIGNED}) $(expr ${IMAGE_ROOTFS_ALIGNMENT} \+ ${BOOT_SPACE_ALIGNED} \+ $ROOTFS_SIZE) + + dd if=${DEPLOY_DIR_IMAGE}/${IMAGE_NAME}.rootfs.uboot.mxsboot-sdcard of=${SDCARD} conv=notrunc seek=1 skip=${UBOOT_PADDING} bs=$(expr 1024 \* 1024) + BOOT_BLOCKS=$(LC_ALL=C parted -s ${SDCARD} unit b print \ + | awk '/ 2 / { print substr($4, 1, length($4 -1)) / 1024 }') + + mkfs.vfat -n "${BOOTDD_VOLUME_ID}" -S 512 -C ${WORKDIR}/boot.img $BOOT_BLOCKS + mcopy -i ${WORKDIR}/boot.img -s ${DEPLOY_DIR_IMAGE}/${KERNEL_IMAGETYPE}-${MACHINE}.bin ::/${KERNEL_IMAGETYPE} + if test -n "${KERNEL_DEVICETREE}"; then + for DTS_FILE in ${KERNEL_DEVICETREE}; do + DTS_BASE_NAME=`basename ${DTS_FILE} | awk -F "." '{print $1}'` + if [ -e "${KERNEL_IMAGETYPE}-${DTS_BASE_NAME}.dtb" ]; then + kernel_bin="`readlink ${KERNEL_IMAGETYPE}-${MACHINE}.bin`" + kernel_bin_for_dtb="`readlink ${KERNEL_IMAGETYPE}-${DTS_BASE_NAME}.dtb | sed "s,$DTS_BASE_NAME,${MACHINE},g;s,\.dtb$,.bin,g"`" + if [ $kernel_bin = $kernel_bin_for_dtb ]; then + mcopy -i ${WORKDIR}/boot.img -s ${DEPLOY_DIR_IMAGE}/${KERNEL_IMAGETYPE}-${DTS_BASE_NAME}.dtb ::/${DTS_BASE_NAME}.dtb + fi + fi + done + fi + + dd if=${WORKDIR}/boot.img of=${SDCARD} conv=notrunc seek=2 bs=$(expr 1024 \* 1024) + ;; + barebox) + # BAREBOX_ENV_SPACE is taken on BOOT_SPACE_ALIGNED but it doesn't really matter as long as the rootfs is aligned + parted -s ${SDCARD} unit KiB mkpart primary 1024 $(expr ${IMAGE_ROOTFS_ALIGNMENT} \+ ${BOOT_SPACE_ALIGNED} - ${BAREBOX_ENV_SPACE}) + parted -s ${SDCARD} unit KiB mkpart primary $(expr ${IMAGE_ROOTFS_ALIGNMENT} \+ ${BOOT_SPACE_ALIGNED} - ${BAREBOX_ENV_SPACE}) $(expr ${IMAGE_ROOTFS_ALIGNMENT} \+ ${BOOT_SPACE_ALIGNED}) + parted -s ${SDCARD} unit KiB mkpart primary $(expr ${IMAGE_ROOTFS_ALIGNMENT} \+ ${BOOT_SPACE_ALIGNED}) $(expr ${IMAGE_ROOTFS_ALIGNMENT} \+ ${BOOT_SPACE_ALIGNED} \+ $ROOTFS_SIZE) + + dd if=${DEPLOY_DIR_IMAGE}/${IMAGE_NAME}.barebox.mxsboot-sdcard of=${SDCARD} conv=notrunc seek=1 bs=$(expr 1024 \* 1024) + dd if=${DEPLOY_DIR_IMAGE}/bareboxenv-${MACHINE}.bin of=${SDCARD} conv=notrunc seek=$(expr ${IMAGE_ROOTFS_ALIGNMENT} \+ ${BOOT_SPACE_ALIGNED} - ${BAREBOX_ENV_SPACE}) bs=1024 + ;; + *) + bberror "Unkown IMAGE_BOOTLOADER value" + exit 1 + ;; + esac + + # Change partition type for mxs processor family + bbnote "Setting partition type to 0x53 as required for mxs' SoC family." + echo -n S | dd of=${SDCARD} bs=1 count=1 seek=450 conv=notrunc + + parted ${SDCARD} print + + dd if=${SDCARD_ROOTFS} of=${SDCARD} conv=notrunc seek=1 bs=$(expr ${BOOT_SPACE_ALIGNED} \* 1024 + ${IMAGE_ROOTFS_ALIGNMENT} \* 1024) && sync && sync +} + +IMAGE_CMD_sdcard () { + if [ -z "${SDCARD_ROOTFS}" ]; then + bberror "SDCARD_ROOTFS is undefined. To use sdcard image from Freescale's BSP it needs to be defined." + exit 1 + fi + + # Align boot partition and calculate total SD card image size + BOOT_SPACE_ALIGNED=$(expr ${BOOT_SPACE} + ${IMAGE_ROOTFS_ALIGNMENT} - 1) + BOOT_SPACE_ALIGNED=$(expr ${BOOT_SPACE_ALIGNED} - ${BOOT_SPACE_ALIGNED} % ${IMAGE_ROOTFS_ALIGNMENT}) + SDCARD_SIZE=$(expr ${IMAGE_ROOTFS_ALIGNMENT} + ${BOOT_SPACE_ALIGNED} + $ROOTFS_SIZE + ${IMAGE_ROOTFS_ALIGNMENT}) + + # Initialize a sparse file + dd if=/dev/zero of=${SDCARD} bs=1 count=0 seek=$(expr 1024 \* ${SDCARD_SIZE}) + + ${SDCARD_GENERATION_COMMAND} +} + +# The sdcard requires the rootfs filesystem to be built before using +# it so we must make this dependency explicit. +IMAGE_TYPEDEP_sdcard = "${@d.getVar('SDCARD_ROOTFS', 1).split('.')[-1]}" diff --git a/examples/yocto/meta-mini/recipes-kernel/conf/distro/lxt.conf b/examples/yocto/meta-mini/recipes-kernel/conf/distro/lxt.conf new file mode 100644 index 0000000..85aef9c --- /dev/null +++ b/examples/yocto/meta-mini/recipes-kernel/conf/distro/lxt.conf @@ -0,0 +1,141 @@ +# Distribution definition for: lxt +# +# Copyright (c) 2011, Intel Corporation. +# All rights reserved. +# +# This file is released under the MIT license as described in +# ../meta/COPYING.MIT. +# +# Poky-tiny is intended to define a tiny Linux system comprised of a +# Linux kernel tailored to support each specific MACHINE and busybox. +# Poky-tiny sets some basic policy to ensure a usable system while still +# keeping the rootfs and kernel image as small as possible. +# +# The policies defined are intended to meet the following goals: +# o Serial consoles only (no framebuffer or VGA console) +# o Basic support for IPV4 networking +# o Single user ash shell +# o Static images (no support for adding packages or libraries later) +# o Read-only or RAMFS root filesystem +# o Combined Linux kernel + rootfs in under 4MB +# o Allow the user to select between eglibc or uclibc with the TCLIBC variable +# +# This is currently a partial definition, the following tasks remain: +# [ ] Integrate linux-yocto-tiny ktype into linux-yocto +# [ ] Define linux-yocto-tiny configs for all supported BSPs +# [ ] Drop ldconfig from the installation +# [ ] Modify the runqemu scripts to work with ext2 parameter: +# runqemu qemux86 qemuparams="-nographic" bootparams="console=ttyS0,115200 root=0800" +# [ ] Modify busybox to allow for DISTRO_FEATURES-like confiruration + +require conf/distro/poky.conf +DISTRO = "lxt" + +# FIXME: consider adding a new "tiny" feature +#DISTRO_FEATURES_append = " tiny" + +# Distro config is evaluated after the machine config, so we have to explicitly +# set the kernel provider to override a machine config. +PREFERRED_PROVIDER_virtual/kernel = "linux-yocto-tiny" +PREFERRED_VERSION_linux-yocto-tiny = "3.8%" + +# We can use packagegroup-core-boot, but in the future we may need a new packagegroup-core-tiny +#POKY_DEFAULT_EXTRA_RDEPENDS += "packagegroup-core-boot" +# Drop kernel-module-af-packet from RRECOMMENDS +POKY_DEFAULT_EXTRA_RRECOMMENDS = "" + +# FIXME: what should we do with this? +TCLIBCAPPEND = "" + +# Disable wide char support for ncurses as we don't include it in +# in the LIBC features below. +ENABLE_WIDEC="false" + +# Drop native language support. This removes the +# eglibc->bash->gettext->libc-posix-clang-wchar dependency. +USE_NLS="no" + +# Reconfigure eglibc for a smaller installation +# Comment out any of the lines below to disable them in the build +DISTRO_FEATURES_LIBC_TINY = "libc-libm libc-crypt" +DISTRO_FEATURES_LIBC_TINY_append_x86-64 = " libc-libm-big" + +# Required for "who" +DISTRO_FEATURES_LIBC_MINIMAL = "libc-utmp libc-getlogin" +DISTRO_FEATURES_LIBC_REGEX = "libc-posix-regexp" +DISTRO_FEATURES_LIBC_NET = "libc-inet libc-nis" + +DISTRO_FEATURES_LIBC = "${DISTRO_FEATURES_LIBC_TINY} \ + ${DISTRO_FEATURES_LIBC_MINIMAL} \ + ${DISTRO_FEATURES_LIBC_REGEX} \ + ${DISTRO_FEATURES_LIBC_NET} \ + " + +# Comment out any of the lines below to disable them in the build +# DISTRO_FEATURES options: +# alsa bluetooth ext2 irda pcmcia usbgadget usbhost wifi nfs zeroconf pci +DISTRO_FEATURES_TINY = "pci" +DISTRO_FEATURES_NET = "ipv4" +DISTRO_FEATURES_USB = "usbhost" +#DISTRO_FEATURES_USBGADGET = "usbgadget" +#DISTRO_FEATURES_WIFI = "wifi" + +DISTRO_FEATURES = "${DISTRO_FEATURES_TINY} \ + ${DISTRO_FEATURES_NET} \ + ${DISTRO_FEATURES_USB} \ + ${DISTRO_FEATURES_USBGADGET} \ + ${DISTRO_FEATURES_WIFI} \ + ${DISTRO_FEATURES_LIBC} \ + " + +# Enable LFS - see bug YOCTO #5865 +DISTRO_FEATURES_append_libc-uclibc = " largefile" + +# Use tmpdevfs and the busybox runtime services +VIRTUAL-RUNTIME_dev_manager = "" +VIRTUAL-RUNTIME_login_manager = "" +VIRTUAL-RUNTIME_init_manager = "tiny-init" +VIRTUAL-RUNTIME_keymaps = "" + +# FIXME: Consider adding "modules" to MACHINE_FEATURES and using that in +# packagegroup-core-base to select modutils-initscripts or not. Similar with "net" and +# netbase. + +# By default we only support ext2 and initramfs. We don't build live as that +# pulls in a lot of dependencies for the live image and the installer, like +# udev, grub, etc. These pull in gettext, which fails to build with wide +# character support. +IMAGE_FSTYPES = "sdcard ext3 tar.gz" + +# Drop v86d from qemu dependency list (we support serial) +# Drop grub from meta-intel BSPs +# FIXME: A different mechanism is needed here. We could define -tiny +# variants of all compatible machines, but that leads to a lot +# more machine configs to maintain long term. +MACHINE_ESSENTIAL_EXTRA_RDEPENDS = "" + +# The mtrace script included by eglibc is a perl script. This means the system +# will build perl in case this package is installed. Since we don't care about +# this script for the purposes of tiny, remove the dependency from here. +RDEPENDS_${PN}-mtrace_pn-eglibc = "" + +INHERIT += "blacklist" +PNBLACKLIST[build-appliance-image] = "not buildable with lxt" +PNBLACKLIST[core-image-base] = "not buildable with lxt" +PNBLACKLIST[core-image-clutter] = "not buildable with lxt" +PNBLACKLIST[core-image-directfb] = "not buildable with lxt" +PNBLACKLIST[core-image-full-cmdline] = "not buildable with lxt" +PNBLACKLIST[core-image-lsb] = "not buildable with lxt" +PNBLACKLIST[core-image-lsb-dev] = "not buildable with lxt" +PNBLACKLIST[core-image-lsb-sdk] = "not buildable with lxt" +PNBLACKLIST[core-image-rt] = "not buildable with lxt" +PNBLACKLIST[core-image-rt-sdk] = "not buildable with lxt" +PNBLACKLIST[core-image-sato] = "not buildable with lxt" +PNBLACKLIST[core-image-sato-dev] = "not buildable with lxt" +PNBLACKLIST[core-image-sato-sdk] = "not buildable with lxt" +PNBLACKLIST[core-image-x11] = "not buildable with lxt" +PNBLACKLIST[qt4e-demo-image] = "not buildable with lxt" +PNBLACKLIST[core-image-weston] = "not buildable with lxt" + +# Disable python usage in opkg-utils since it won't build with tiny config +PACKAGECONFIG_pn-opkg-utils = "" diff --git a/examples/yocto/meta-mini/recipes-kernel/conf/layer.conf b/examples/yocto/meta-mini/recipes-kernel/conf/layer.conf new file mode 100644 index 0000000..b1c4f1e --- /dev/null +++ b/examples/yocto/meta-mini/recipes-kernel/conf/layer.conf @@ -0,0 +1,10 @@ +# We have a conf and classes directory, add to BBPATH +BBPATH .= ":${LAYERDIR}" + +# We have recipes-* directories, add to BBFILES +BBFILES += "${LAYERDIR}/recipes-*/*/*.bb \ + ${LAYERDIR}/recipes-*/*/*.bbappend" + +BBFILE_COLLECTIONS += "mini" +BBFILE_PATTERN_mini = "^${LAYERDIR}/" +BBFILE_PRIORITY_mini = "7" diff --git a/examples/yocto/meta-mini/recipes-kernel/conf/machine/imx6qsabrelite.conf b/examples/yocto/meta-mini/recipes-kernel/conf/machine/imx6qsabrelite.conf new file mode 100644 index 0000000..0de7f20 --- /dev/null +++ b/examples/yocto/meta-mini/recipes-kernel/conf/machine/imx6qsabrelite.conf @@ -0,0 +1,34 @@ +#@TYPE: Machine +#@NAME: SabreLite +#@SOC: i.MX6Q +#@DESCRIPTION: Machine configuration for Boundary Devices SabreLite +#@MAINTAINER: Manuel Traut + +include conf/machine/include/imx-base.inc +include conf/machine/include/tune-cortexa9.inc + +SOC_FAMILY = "mx6:mx6dl:mx6q" + +PREFERRED_PROVIDER_virtual/kernel = "linux-vanilla" +KERNEL_DEVICETREE = "imx6q-sabrelite.dtb" + +# Ensure boot scripts will be available at rootfs time +do_rootfs[depends] += "u-boot-script:do_deploy" + +# Boot scripts to install +BOOT_SCRIPTS = "6x_bootscript-${MACHINE}:6x_bootscript" + +UBOOT_MACHINE ?= "nitrogen6q_config" +SERIAL_CONSOLE = "115200 ttymxc1" + +IMAGE_FSTYPES += "tar.bz2 ext3" + +# avoid this error +# ERROR: QA Issue: eglibc-locale: Files/directories were installed but not +# shipped +# /usr/bin +# /usr/lib +# /usr/share/i18n +# /usr/share/i18n/locales +# /usr/share/i18n/locales/POSIX +ENABLE_BINARY_LOCALE_GENERATION = "0" diff --git a/examples/yocto/meta-mini/recipes-kernel/conf/machine/include/fsl-default-settings.inc b/examples/yocto/meta-mini/recipes-kernel/conf/machine/include/fsl-default-settings.inc new file mode 100644 index 0000000..b36e75a --- /dev/null +++ b/examples/yocto/meta-mini/recipes-kernel/conf/machine/include/fsl-default-settings.inc @@ -0,0 +1,3 @@ +# Freescale BSP default settings + +IMAGE_CLASSES += "image_types_fsl" diff --git a/examples/yocto/meta-mini/recipes-kernel/conf/machine/include/imx-base.inc b/examples/yocto/meta-mini/recipes-kernel/conf/machine/include/imx-base.inc new file mode 100644 index 0000000..fcd45ff --- /dev/null +++ b/examples/yocto/meta-mini/recipes-kernel/conf/machine/include/imx-base.inc @@ -0,0 +1,38 @@ +# Provides the i.MX common settings + +include conf/machine/include/fsl-default-settings.inc +include conf/machine/include/soc-family.inc + +# Set specific make target and binary suffix +UBOOT_MAKE_TARGET = "u-boot.imx" +UBOOT_SUFFIX ?= "imx" + +UBOOT_ENTRYPOINT_mx3 = "0x80008000" +UBOOT_ENTRYPOINT_mx51 = "0x90008000" +UBOOT_ENTRYPOINT_mx53 = "0x70008000" +UBOOT_ENTRYPOINT_mx6 = "0x10008000" +UBOOT_ENTRYPOINT_mx6sl = "0x80008000" +UBOOT_ENTRYPOINT_vf60 = "0x80008000" + +# Float-Point setting +DEFAULTTUNE_mx6 ?= "cortexa9hf-neon" + +# Sub-architecture support +MACHINE_SOCARCH ?= "" +MACHINE_SOCARCH_mx3 = "${TUNE_PKGARCH}-mx3" +MACHINE_SOCARCH_mx5 = "${TUNE_PKGARCH}-mx5" +MACHINE_SOCARCH_mx6 = "${TUNE_PKGARCH}-mx6" +MACHINE_SOCARCH_vf60 = "${TUNE_PKGARCH}-vf60" +PACKAGE_EXTRA_ARCHS_append = " ${MACHINE_SOCARCH}" + +MACHINE_ARCH_FILTER = "virtual/kernel" +INHERIT += "fsl-dynamic-packagearch" + +SDCARD_ROOTFS ?= "${DEPLOY_DIR_IMAGE}/${IMAGE_NAME}.rootfs.ext3" +IMAGE_FSTYPES ?= "tar.bz2 ext3 sdcard" + +SERIAL_CONSOLE = "115200 ttymxc0" + +KERNEL_IMAGETYPE = "uImage" + +MACHINE_FEATURES = "" diff --git a/examples/yocto/meta-mini/recipes-kernel/conf/machine/include/imx6sabreauto-common.inc b/examples/yocto/meta-mini/recipes-kernel/conf/machine/include/imx6sabreauto-common.inc new file mode 100644 index 0000000..e35bc82 --- /dev/null +++ b/examples/yocto/meta-mini/recipes-kernel/conf/machine/include/imx6sabreauto-common.inc @@ -0,0 +1,6 @@ +# Provides the i.MX6 SABRE AUTO common settings + +require conf/machine/include/imx-base.inc +require conf/machine/include/tune-cortexa9.inc + +SERIAL_CONSOLE = "115200 ttymxc3" diff --git a/examples/yocto/meta-mini/recipes-kernel/conf/machine/include/imx6sabresd-common.inc b/examples/yocto/meta-mini/recipes-kernel/conf/machine/include/imx6sabresd-common.inc new file mode 100644 index 0000000..21a23b8 --- /dev/null +++ b/examples/yocto/meta-mini/recipes-kernel/conf/machine/include/imx6sabresd-common.inc @@ -0,0 +1,6 @@ +# Provides the i.MX6 SABRE SD common settings + +require conf/machine/include/imx-base.inc +require conf/machine/include/tune-cortexa9.inc + +SERIAL_CONSOLE = "115200 ttymxc0" diff --git a/examples/yocto/meta-mini/recipes-kernel/linux-vanilla/files/beaglebone-black/defconfig b/examples/yocto/meta-mini/recipes-kernel/linux-vanilla/files/beaglebone-black/defconfig new file mode 100644 index 0000000..536a137 --- /dev/null +++ b/examples/yocto/meta-mini/recipes-kernel/linux-vanilla/files/beaglebone-black/defconfig @@ -0,0 +1,308 @@ +CONFIG_SYSVIPC=y +CONFIG_POSIX_MQUEUE=y +CONFIG_NO_HZ=y +CONFIG_HIGH_RES_TIMERS=y +CONFIG_BSD_PROCESS_ACCT=y +CONFIG_IKCONFIG=y +CONFIG_IKCONFIG_PROC=y +CONFIG_LOG_BUF_SHIFT=16 +CONFIG_BLK_DEV_INITRD=y +CONFIG_EXPERT=y +CONFIG_SLAB=y +CONFIG_PROFILING=y +CONFIG_OPROFILE=y +CONFIG_KPROBES=y +CONFIG_MODULES=y +CONFIG_MODULE_FORCE_LOAD=y +CONFIG_MODULE_UNLOAD=y +CONFIG_MODULE_FORCE_UNLOAD=y +CONFIG_MODVERSIONS=y +CONFIG_MODULE_SRCVERSION_ALL=y +# CONFIG_BLK_DEV_BSG is not set +CONFIG_PARTITION_ADVANCED=y +CONFIG_ARCH_MULTI_V6=y +CONFIG_POWER_AVS_OMAP=y +CONFIG_POWER_AVS_OMAP_CLASS3=y +CONFIG_OMAP_RESET_CLOCKS=y +CONFIG_OMAP_MUX_DEBUG=y +CONFIG_ARCH_OMAP2=y +CONFIG_ARCH_OMAP3=y +CONFIG_ARCH_OMAP4=y +CONFIG_SOC_OMAP5=y +CONFIG_SOC_AM33XX=y +CONFIG_SOC_AM43XX=y +CONFIG_SOC_DRA7XX=y +CONFIG_CACHE_L2X0=y +CONFIG_ARM_THUMBEE=y +CONFIG_ARM_ERRATA_411920=y +CONFIG_SMP=y +CONFIG_NR_CPUS=2 +CONFIG_CMA=y +CONFIG_ZBOOT_ROM_TEXT=0x0 +CONFIG_ZBOOT_ROM_BSS=0x0 +CONFIG_ARM_APPENDED_DTB=y +CONFIG_ARM_ATAG_DTB_COMPAT=y +CONFIG_CMDLINE="root=/dev/mmcblk0p2 rootwait console=ttyO2,115200" +CONFIG_KEXEC=y +CONFIG_FPE_NWFPE=y +CONFIG_CPU_IDLE=y +CONFIG_BINFMT_MISC=y +CONFIG_PM_DEBUG=y +CONFIG_NET=y +CONFIG_PACKET=y +CONFIG_UNIX=y +CONFIG_XFRM_USER=y +CONFIG_NET_KEY=y +CONFIG_NET_KEY_MIGRATE=y +CONFIG_INET=y +CONFIG_IP_MULTICAST=y +CONFIG_IP_PNP=y +CONFIG_IP_PNP_DHCP=y +CONFIG_IP_PNP_BOOTP=y +CONFIG_IP_PNP_RARP=y +# CONFIG_INET_LRO is not set +# CONFIG_IPV6 is not set +CONFIG_NETFILTER=y +CONFIG_CAN=m +CONFIG_CAN_C_CAN=m +CONFIG_CAN_C_CAN_PLATFORM=m +CONFIG_BT=m +CONFIG_BT_HCIUART=m +CONFIG_BT_HCIUART_H4=y +CONFIG_BT_HCIUART_BCSP=y +CONFIG_BT_HCIUART_LL=y +CONFIG_BT_HCIBCM203X=m +CONFIG_BT_HCIBPA10X=m +CONFIG_CFG80211=m +CONFIG_MAC80211=m +CONFIG_MAC80211_RC_PID=y +CONFIG_MAC80211_RC_DEFAULT_PID=y +CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" +CONFIG_DEVTMPFS=y +CONFIG_DEVTMPFS_MOUNT=y +CONFIG_DMA_CMA=y +CONFIG_OMAP_OCP2SCP=y +CONFIG_CONNECTOR=y +CONFIG_MTD=y +CONFIG_MTD_CMDLINE_PARTS=y +CONFIG_MTD_BLOCK=y +CONFIG_MTD_OOPS=y +CONFIG_MTD_CFI=y +CONFIG_MTD_CFI_INTELEXT=y +CONFIG_MTD_NAND=y +CONFIG_MTD_NAND_OMAP2=y +CONFIG_MTD_ONENAND=y +CONFIG_MTD_ONENAND_VERIFY_WRITE=y +CONFIG_MTD_ONENAND_OMAP2=y +CONFIG_MTD_UBI=y +CONFIG_BLK_DEV_LOOP=y +CONFIG_BLK_DEV_RAM=y +CONFIG_BLK_DEV_RAM_SIZE=16384 +CONFIG_SENSORS_TSL2550=m +CONFIG_BMP085_I2C=m +CONFIG_SENSORS_LIS3_I2C=m +CONFIG_SCSI=y +CONFIG_BLK_DEV_SD=y +CONFIG_SCSI_MULTI_LUN=y +CONFIG_SCSI_SCAN_ASYNC=y +CONFIG_MD=y +CONFIG_NETDEVICES=y +CONFIG_KS8851=y +CONFIG_KS8851_MLL=y +CONFIG_SMC91X=y +CONFIG_SMSC911X=y +CONFIG_TI_CPSW=y +CONFIG_AT803X_PHY=y +CONFIG_SMSC_PHY=y +CONFIG_USB_USBNET=y +CONFIG_USB_NET_SMSC95XX=y +CONFIG_USB_ALI_M5632=y +CONFIG_USB_AN2720=y +CONFIG_USB_EPSON2888=y +CONFIG_USB_KC2190=y +CONFIG_LIBERTAS=m +CONFIG_LIBERTAS_USB=m +CONFIG_LIBERTAS_SDIO=m +CONFIG_LIBERTAS_DEBUG=y +CONFIG_WL_TI=y +CONFIG_WL12XX=m +CONFIG_WL18XX=m +CONFIG_WLCORE_SPI=m +CONFIG_WLCORE_SDIO=m +CONFIG_MWIFIEX=m +CONFIG_MWIFIEX_SDIO=m +CONFIG_MWIFIEX_USB=m +CONFIG_INPUT_JOYDEV=y +CONFIG_INPUT_EVDEV=y +CONFIG_KEYBOARD_GPIO=y +CONFIG_KEYBOARD_MATRIX=m +CONFIG_KEYBOARD_TWL4030=y +CONFIG_INPUT_TOUCHSCREEN=y +CONFIG_TOUCHSCREEN_ADS7846=y +CONFIG_INPUT_MISC=y +CONFIG_INPUT_TWL4030_PWRBUTTON=y +# CONFIG_LEGACY_PTYS is not set +CONFIG_SERIAL_8250=y +CONFIG_SERIAL_8250_CONSOLE=y +CONFIG_SERIAL_8250_NR_UARTS=32 +CONFIG_SERIAL_8250_EXTENDED=y +CONFIG_SERIAL_8250_MANY_PORTS=y +CONFIG_SERIAL_8250_SHARE_IRQ=y +CONFIG_SERIAL_8250_DETECT_IRQ=y +CONFIG_SERIAL_8250_RSA=y +CONFIG_SERIAL_OF_PLATFORM=y +CONFIG_SERIAL_OMAP=y +CONFIG_SERIAL_OMAP_CONSOLE=y +CONFIG_HW_RANDOM=y +CONFIG_I2C_CHARDEV=y +CONFIG_SPI=y +CONFIG_SPI_OMAP24XX=y +CONFIG_PINCTRL_SINGLE=y +CONFIG_DEBUG_GPIO=y +CONFIG_GPIO_SYSFS=y +CONFIG_GPIO_TWL4030=y +CONFIG_W1=y +CONFIG_POWER_SUPPLY=y +CONFIG_POWER_AVS=y +CONFIG_SENSORS_LM75=m +CONFIG_THERMAL=y +CONFIG_THERMAL_GOV_FAIR_SHARE=y +CONFIG_THERMAL_GOV_USER_SPACE=y +CONFIG_CPU_THERMAL=y +CONFIG_TI_SOC_THERMAL=y +CONFIG_TI_THERMAL=y +CONFIG_OMAP4_THERMAL=y +CONFIG_OMAP5_THERMAL=y +CONFIG_DRA752_THERMAL=y +CONFIG_WATCHDOG=y +CONFIG_OMAP_WATCHDOG=y +CONFIG_TWL4030_WATCHDOG=y +CONFIG_MFD_SYSCON=y +CONFIG_MFD_PALMAS=y +CONFIG_MFD_TPS65217=y +CONFIG_MFD_TPS65910=y +CONFIG_TWL6040_CORE=y +CONFIG_REGULATOR_FIXED_VOLTAGE=y +CONFIG_REGULATOR_PALMAS=y +CONFIG_REGULATOR_TI_ABB=y +CONFIG_REGULATOR_TPS65023=y +CONFIG_REGULATOR_TPS6507X=y +CONFIG_REGULATOR_TPS65217=y +CONFIG_REGULATOR_TPS65910=y +CONFIG_REGULATOR_TWL4030=y +CONFIG_REGULATOR_PBIAS=y +CONFIG_FB=y +CONFIG_FIRMWARE_EDID=y +CONFIG_FB_MODE_HELPERS=y +CONFIG_FB_TILEBLITTING=y +CONFIG_OMAP2_DSS=m +CONFIG_OMAP2_DSS_SDI=y +CONFIG_OMAP2_DSS_DSI=y +CONFIG_FB_OMAP2=m +CONFIG_DISPLAY_ENCODER_TFP410=m +CONFIG_DISPLAY_ENCODER_TPD12S015=m +CONFIG_DISPLAY_CONNECTOR_DVI=m +CONFIG_DISPLAY_CONNECTOR_HDMI=m +CONFIG_DISPLAY_PANEL_DPI=m +CONFIG_BACKLIGHT_LCD_SUPPORT=y +CONFIG_LCD_CLASS_DEVICE=y +CONFIG_LCD_PLATFORM=y +CONFIG_FRAMEBUFFER_CONSOLE=y +CONFIG_FRAMEBUFFER_CONSOLE_ROTATION=y +CONFIG_LOGO=y +CONFIG_SOUND=m +CONFIG_SND=m +CONFIG_SND_MIXER_OSS=m +CONFIG_SND_PCM_OSS=m +CONFIG_SND_VERBOSE_PRINTK=y +CONFIG_SND_DEBUG=y +CONFIG_SND_USB_AUDIO=m +CONFIG_SND_SOC=m +CONFIG_SND_OMAP_SOC=m +CONFIG_SND_AM33XX_SOC_EVM=m +CONFIG_SND_DAVINCI_SOC=m +CONFIG_SND_OMAP_SOC_OMAP_TWL4030=m +CONFIG_SND_OMAP_SOC_OMAP_ABE_TWL6040=m +CONFIG_SND_OMAP_SOC_OMAP3_PANDORA=m +CONFIG_USB=y +CONFIG_USB_ANNOUNCE_NEW_DEVICES=y +CONFIG_USB_MON=y +CONFIG_USB_WDM=y +CONFIG_USB_STORAGE=y +CONFIG_USB_DWC3=m +CONFIG_USB_TEST=y +CONFIG_NOP_USB_XCEIV=y +CONFIG_OMAP_USB2=y +CONFIG_TI_PIPE3=y +CONFIG_AM335X_PHY_USB=y +CONFIG_USB_GADGET=y +CONFIG_USB_GADGET_DEBUG=y +CONFIG_USB_GADGET_DEBUG_FILES=y +CONFIG_USB_GADGET_DEBUG_FS=y +CONFIG_USB_ZERO=m +CONFIG_MMC=y +CONFIG_MMC_UNSAFE_RESUME=y +CONFIG_SDIO_UART=y +CONFIG_MMC_OMAP=y +CONFIG_MMC_OMAP_HS=y +CONFIG_NEW_LEDS=y +CONFIG_LEDS_CLASS=y +CONFIG_LEDS_GPIO=y +CONFIG_LEDS_TRIGGERS=y +CONFIG_LEDS_TRIGGER_TIMER=y +CONFIG_LEDS_TRIGGER_ONESHOT=y +CONFIG_LEDS_TRIGGER_HEARTBEAT=y +CONFIG_LEDS_TRIGGER_BACKLIGHT=y +CONFIG_LEDS_TRIGGER_CPU=y +CONFIG_LEDS_TRIGGER_GPIO=y +CONFIG_LEDS_TRIGGER_DEFAULT_ON=y +CONFIG_RTC_CLASS=y +CONFIG_RTC_DRV_TWL92330=y +CONFIG_RTC_DRV_TWL4030=y +CONFIG_RTC_DRV_OMAP=y +CONFIG_DMADEVICES=y +CONFIG_TI_EDMA=y +CONFIG_DMA_OMAP=y +CONFIG_EXTCON=y +CONFIG_EXTCON_PALMAS=y +CONFIG_EXT2_FS=y +CONFIG_EXT3_FS=y +# CONFIG_EXT3_FS_XATTR is not set +CONFIG_EXT4_FS=y +CONFIG_QUOTA=y +CONFIG_QFMT_V2=y +CONFIG_MSDOS_FS=y +CONFIG_VFAT_FS=y +CONFIG_TMPFS=y +CONFIG_JFFS2_FS=y +CONFIG_JFFS2_SUMMARY=y +CONFIG_JFFS2_FS_XATTR=y +CONFIG_JFFS2_COMPRESSION_OPTIONS=y +CONFIG_JFFS2_LZO=y +CONFIG_JFFS2_RUBIN=y +CONFIG_UBIFS_FS=y +CONFIG_CRAMFS=y +CONFIG_NFS_FS=y +CONFIG_NFS_V3_ACL=y +CONFIG_NFS_V4=y +CONFIG_ROOT_NFS=y +CONFIG_NLS_CODEPAGE_437=y +CONFIG_NLS_ISO8859_1=y +CONFIG_PRINTK_TIME=y +CONFIG_DEBUG_INFO=y +CONFIG_MAGIC_SYSRQ=y +CONFIG_SCHEDSTATS=y +CONFIG_TIMER_STATS=y +CONFIG_PROVE_LOCKING=y +# CONFIG_DEBUG_BUGVERBOSE is not set +CONFIG_SECURITY=y +CONFIG_CRYPTO_MICHAEL_MIC=y +# CONFIG_CRYPTO_ANSI_CPRNG is not set +CONFIG_CRC_CCITT=y +CONFIG_CRC_T10DIF=y +CONFIG_CRC_ITU_T=y +CONFIG_CRC7=y +CONFIG_LIBCRC32C=y +CONFIG_FONTS=y +CONFIG_FONT_8x8=y +CONFIG_FONT_8x16=y diff --git a/examples/yocto/meta-mini/recipes-kernel/linux-vanilla/files/imx6qsabrelite/defconfig b/examples/yocto/meta-mini/recipes-kernel/linux-vanilla/files/imx6qsabrelite/defconfig new file mode 100644 index 0000000..d4b216a --- /dev/null +++ b/examples/yocto/meta-mini/recipes-kernel/linux-vanilla/files/imx6qsabrelite/defconfig @@ -0,0 +1,3721 @@ +# +# Automatically generated file; DO NOT EDIT. +# Linux/arm 3.16.1 Kernel Configuration +# +CONFIG_ARM=y +CONFIG_ARM_HAS_SG_CHAIN=y +CONFIG_MIGHT_HAVE_PCI=y +CONFIG_SYS_SUPPORTS_APM_EMULATION=y +CONFIG_HAVE_PROC_CPU=y +CONFIG_STACKTRACE_SUPPORT=y +CONFIG_LOCKDEP_SUPPORT=y +CONFIG_TRACE_IRQFLAGS_SUPPORT=y +CONFIG_RWSEM_XCHGADD_ALGORITHM=y +CONFIG_GENERIC_HWEIGHT=y +CONFIG_GENERIC_CALIBRATE_DELAY=y +CONFIG_NEED_DMA_MAP_STATE=y +CONFIG_ARCH_SUPPORTS_UPROBES=y +CONFIG_FIQ=y +CONFIG_VECTORS_BASE=0xffff0000 +CONFIG_ARM_PATCH_PHYS_VIRT=y +CONFIG_GENERIC_BUG=y +CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" +CONFIG_IRQ_WORK=y +CONFIG_BUILDTIME_EXTABLE_SORT=y + +# +# General setup +# +CONFIG_INIT_ENV_ARG_LIMIT=32 +CONFIG_CROSS_COMPILE="" +# CONFIG_COMPILE_TEST is not set +CONFIG_LOCALVERSION="" +CONFIG_LOCALVERSION_AUTO=y +CONFIG_HAVE_KERNEL_GZIP=y +CONFIG_HAVE_KERNEL_LZMA=y +CONFIG_HAVE_KERNEL_XZ=y +CONFIG_HAVE_KERNEL_LZO=y +CONFIG_HAVE_KERNEL_LZ4=y +# CONFIG_KERNEL_GZIP is not set +# CONFIG_KERNEL_LZMA is not set +# CONFIG_KERNEL_XZ is not set +CONFIG_KERNEL_LZO=y +# CONFIG_KERNEL_LZ4 is not set +CONFIG_DEFAULT_HOSTNAME="(none)" +CONFIG_SWAP=y +CONFIG_SYSVIPC=y +CONFIG_SYSVIPC_SYSCTL=y +# CONFIG_POSIX_MQUEUE is not set +CONFIG_CROSS_MEMORY_ATTACH=y +# CONFIG_FHANDLE is not set +CONFIG_USELIB=y +# CONFIG_AUDIT is not set +CONFIG_HAVE_ARCH_AUDITSYSCALL=y + +# +# IRQ subsystem +# +CONFIG_GENERIC_IRQ_PROBE=y +CONFIG_GENERIC_IRQ_SHOW=y +CONFIG_HARDIRQS_SW_RESEND=y +CONFIG_GENERIC_IRQ_CHIP=y +CONFIG_IRQ_DOMAIN=y +# CONFIG_IRQ_DOMAIN_DEBUG is not set +CONFIG_IRQ_FORCED_THREADING=y +CONFIG_SPARSE_IRQ=y +CONFIG_KTIME_SCALAR=y +CONFIG_GENERIC_CLOCKEVENTS=y +CONFIG_GENERIC_CLOCKEVENTS_BUILD=y +CONFIG_ARCH_HAS_TICK_BROADCAST=y +CONFIG_GENERIC_CLOCKEVENTS_BROADCAST=y + +# +# Timers subsystem +# +CONFIG_TICK_ONESHOT=y +CONFIG_NO_HZ_COMMON=y +# CONFIG_HZ_PERIODIC is not set +CONFIG_NO_HZ_IDLE=y +# CONFIG_NO_HZ_FULL is not set +CONFIG_NO_HZ=y +CONFIG_HIGH_RES_TIMERS=y + +# +# CPU/Task time and stats accounting +# +CONFIG_TICK_CPU_ACCOUNTING=y +# CONFIG_VIRT_CPU_ACCOUNTING_GEN is not set +# CONFIG_IRQ_TIME_ACCOUNTING is not set +# CONFIG_BSD_PROCESS_ACCT is not set +# CONFIG_TASKSTATS is not set + +# +# RCU Subsystem +# +CONFIG_TREE_RCU=y +# CONFIG_PREEMPT_RCU is not set +CONFIG_RCU_STALL_COMMON=y +# CONFIG_RCU_USER_QS is not set +CONFIG_RCU_FANOUT=32 +CONFIG_RCU_FANOUT_LEAF=16 +# CONFIG_RCU_FANOUT_EXACT is not set +# CONFIG_RCU_FAST_NO_HZ is not set +# CONFIG_TREE_RCU_TRACE is not set +# CONFIG_RCU_NOCB_CPU is not set +# CONFIG_IKCONFIG is not set +CONFIG_LOG_BUF_SHIFT=18 +CONFIG_GENERIC_SCHED_CLOCK=y +CONFIG_CGROUPS=y +# CONFIG_CGROUP_DEBUG is not set +# CONFIG_CGROUP_FREEZER is not set +# CONFIG_CGROUP_DEVICE is not set +# CONFIG_CPUSETS is not set +# CONFIG_CGROUP_CPUACCT is not set +# CONFIG_RESOURCE_COUNTERS is not set +# CONFIG_CGROUP_PERF is not set +# CONFIG_CGROUP_SCHED is not set +# CONFIG_BLK_CGROUP is not set +# CONFIG_CHECKPOINT_RESTORE is not set +# CONFIG_NAMESPACES is not set +# CONFIG_SCHED_AUTOGROUP is not set +# CONFIG_SYSFS_DEPRECATED is not set +CONFIG_RELAY=y +CONFIG_BLK_DEV_INITRD=y +CONFIG_INITRAMFS_SOURCE="" +CONFIG_RD_GZIP=y +# CONFIG_RD_BZIP2 is not set +# CONFIG_RD_LZMA is not set +# CONFIG_RD_XZ is not set +# CONFIG_RD_LZO is not set +# CONFIG_RD_LZ4 is not set +# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set +CONFIG_SYSCTL=y +CONFIG_ANON_INODES=y +CONFIG_HAVE_UID16=y +CONFIG_EXPERT=y +CONFIG_UID16=y +# CONFIG_SGETMASK_SYSCALL is not set +CONFIG_SYSFS_SYSCALL=y +# CONFIG_SYSCTL_SYSCALL is not set +CONFIG_KALLSYMS=y +CONFIG_KALLSYMS_ALL=y +CONFIG_PRINTK=y +CONFIG_BUG=y +CONFIG_ELF_CORE=y +CONFIG_BASE_FULL=y +CONFIG_FUTEX=y +CONFIG_EPOLL=y +CONFIG_SIGNALFD=y +CONFIG_TIMERFD=y +CONFIG_EVENTFD=y +CONFIG_SHMEM=y +CONFIG_AIO=y +CONFIG_PCI_QUIRKS=y +# CONFIG_EMBEDDED is not set +CONFIG_HAVE_PERF_EVENTS=y +CONFIG_PERF_USE_VMALLOC=y + +# +# Kernel Performance Events And Counters +# +CONFIG_PERF_EVENTS=y +# CONFIG_DEBUG_PERF_USE_VMALLOC is not set +CONFIG_VM_EVENT_COUNTERS=y +# CONFIG_SLUB_DEBUG is not set +# CONFIG_COMPAT_BRK is not set +# CONFIG_SLAB is not set +CONFIG_SLUB=y +# CONFIG_SLOB is not set +CONFIG_SLUB_CPU_PARTIAL=y +# CONFIG_SYSTEM_TRUSTED_KEYRING is not set +# CONFIG_PROFILING is not set +CONFIG_HAVE_OPROFILE=y +# CONFIG_KPROBES is not set +# CONFIG_JUMP_LABEL is not set +# CONFIG_UPROBES is not set +# CONFIG_HAVE_64BIT_ALIGNED_ACCESS is not set +CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y +CONFIG_ARCH_USE_BUILTIN_BSWAP=y +CONFIG_HAVE_KPROBES=y +CONFIG_HAVE_KRETPROBES=y +CONFIG_HAVE_ARCH_TRACEHOOK=y +CONFIG_HAVE_DMA_ATTRS=y +CONFIG_HAVE_DMA_CONTIGUOUS=y +CONFIG_GENERIC_SMP_IDLE_THREAD=y +CONFIG_GENERIC_IDLE_POLL_SETUP=y +CONFIG_HAVE_REGS_AND_STACK_ACCESS_API=y +CONFIG_HAVE_CLK=y +CONFIG_HAVE_DMA_API_DEBUG=y +CONFIG_HAVE_HW_BREAKPOINT=y +CONFIG_HAVE_PERF_REGS=y +CONFIG_HAVE_PERF_USER_STACK_DUMP=y +CONFIG_HAVE_ARCH_JUMP_LABEL=y +CONFIG_ARCH_WANT_IPC_PARSE_VERSION=y +CONFIG_HAVE_ARCH_SECCOMP_FILTER=y +CONFIG_HAVE_CC_STACKPROTECTOR=y +# CONFIG_CC_STACKPROTECTOR is not set +CONFIG_CC_STACKPROTECTOR_NONE=y +# CONFIG_CC_STACKPROTECTOR_REGULAR is not set +# CONFIG_CC_STACKPROTECTOR_STRONG is not set +CONFIG_HAVE_CONTEXT_TRACKING=y +CONFIG_HAVE_VIRT_CPU_ACCOUNTING_GEN=y +CONFIG_HAVE_IRQ_TIME_ACCOUNTING=y +CONFIG_MODULES_USE_ELF_REL=y +CONFIG_CLONE_BACKWARDS=y +CONFIG_OLD_SIGSUSPEND3=y +CONFIG_OLD_SIGACTION=y + +# +# GCOV-based kernel profiling +# +# CONFIG_GCOV_KERNEL is not set +CONFIG_HAVE_GENERIC_DMA_COHERENT=y +CONFIG_RT_MUTEXES=y +CONFIG_BASE_SMALL=0 +CONFIG_MODULES=y +# CONFIG_MODULE_FORCE_LOAD is not set +CONFIG_MODULE_UNLOAD=y +# CONFIG_MODULE_FORCE_UNLOAD is not set +CONFIG_MODVERSIONS=y +CONFIG_MODULE_SRCVERSION_ALL=y +# CONFIG_MODULE_SIG is not set +CONFIG_STOP_MACHINE=y +CONFIG_BLOCK=y +CONFIG_LBDAF=y +# CONFIG_BLK_DEV_BSG is not set +# CONFIG_BLK_DEV_BSGLIB is not set +# CONFIG_BLK_DEV_INTEGRITY is not set +# CONFIG_BLK_CMDLINE_PARSER is not set + +# +# Partition Types +# +# CONFIG_PARTITION_ADVANCED is not set +CONFIG_MSDOS_PARTITION=y +CONFIG_EFI_PARTITION=y + +# +# IO Schedulers +# +CONFIG_IOSCHED_NOOP=y +CONFIG_IOSCHED_DEADLINE=y +CONFIG_IOSCHED_CFQ=y +# CONFIG_DEFAULT_DEADLINE is not set +CONFIG_DEFAULT_CFQ=y +# CONFIG_DEFAULT_NOOP is not set +CONFIG_DEFAULT_IOSCHED="cfq" +CONFIG_UNINLINE_SPIN_UNLOCK=y +CONFIG_ARCH_SUPPORTS_ATOMIC_RMW=y +CONFIG_RWSEM_SPIN_ON_OWNER=y +CONFIG_FREEZER=y + +# +# System Type +# +CONFIG_MMU=y +CONFIG_ARCH_MULTIPLATFORM=y +# CONFIG_ARCH_INTEGRATOR is not set +# CONFIG_ARCH_REALVIEW is not set +# CONFIG_ARCH_VERSATILE is not set +# CONFIG_ARCH_AT91 is not set +# CONFIG_ARCH_CLPS711X is not set +# CONFIG_ARCH_GEMINI is not set +# CONFIG_ARCH_EBSA110 is not set +# CONFIG_ARCH_EP93XX is not set +# CONFIG_ARCH_FOOTBRIDGE is not set +# CONFIG_ARCH_NETX is not set +# CONFIG_ARCH_IOP13XX is not set +# CONFIG_ARCH_IOP32X is not set +# CONFIG_ARCH_IOP33X is not set +# CONFIG_ARCH_IXP4XX is not set +# CONFIG_ARCH_DOVE is not set +# CONFIG_ARCH_KIRKWOOD is not set +# CONFIG_ARCH_MV78XX0 is not set +# CONFIG_ARCH_ORION5X is not set +# CONFIG_ARCH_MMP is not set +# CONFIG_ARCH_KS8695 is not set +# CONFIG_ARCH_W90X900 is not set +# CONFIG_ARCH_LPC32XX is not set +# CONFIG_ARCH_PXA is not set +# CONFIG_ARCH_MSM is not set +# CONFIG_ARCH_SHMOBILE_LEGACY is not set +# CONFIG_ARCH_RPC is not set +# CONFIG_ARCH_SA1100 is not set +# CONFIG_ARCH_S3C24XX is not set +# CONFIG_ARCH_S3C64XX is not set +# CONFIG_ARCH_S5P64X0 is not set +# CONFIG_ARCH_S5PC100 is not set +# CONFIG_ARCH_S5PV210 is not set +# CONFIG_ARCH_DAVINCI is not set +# CONFIG_ARCH_OMAP1 is not set + +# +# Multiple platform selection +# + +# +# CPU Core family selection +# +CONFIG_ARCH_MULTI_V6=y +CONFIG_ARCH_MULTI_V7=y +CONFIG_ARCH_MULTI_V6_V7=y +# CONFIG_ARCH_MULTI_CPU_AUTO is not set +# CONFIG_ARCH_VIRT is not set +# CONFIG_ARCH_MVEBU is not set +# CONFIG_ARCH_BCM is not set +# CONFIG_ARCH_BERLIN is not set +# CONFIG_ARCH_CNS3XXX is not set +# CONFIG_ARCH_HIGHBANK is not set +# CONFIG_ARCH_HI3xxx is not set +# CONFIG_ARCH_KEYSTONE is not set +CONFIG_ARCH_MXC=y +CONFIG_MXC_TZIC=y +CONFIG_MXC_AVIC=y +CONFIG_MXC_DEBUG_BOARD=y +CONFIG_HAVE_EPIT=y +# CONFIG_MXC_USE_EPIT is not set +CONFIG_ARCH_HAS_RNGA=y +CONFIG_HAVE_IMX_ANATOP=y +CONFIG_HAVE_IMX_GPC=y +CONFIG_HAVE_IMX_MMDC=y +CONFIG_HAVE_IMX_SRC=y +CONFIG_ARCH_MXC_IOMUX_V3=y +CONFIG_SOC_IMX31=y +CONFIG_SOC_IMX35=y +CONFIG_SOC_IMX5=y +CONFIG_SOC_IMX51=y + +# +# MX31 platforms: +# +CONFIG_MACH_MX31ADS=y +CONFIG_MACH_MX31LILLY=y +CONFIG_MACH_MX31LITE=y +CONFIG_MACH_PCM037=y +CONFIG_MACH_PCM037_EET=y +CONFIG_MACH_MX31_3DS=y +# CONFIG_MACH_MX31_3DS_MXC_NAND_USE_BBT is not set +CONFIG_MACH_MX31MOBOARD=y +CONFIG_MACH_QONG=y +CONFIG_MACH_ARMADILLO5X0=y +CONFIG_MACH_KZM_ARM11_01=y +CONFIG_MACH_BUG=y +CONFIG_MACH_IMX31_DT=y + +# +# MX35 platforms: +# +CONFIG_MACH_IMX35_DT=y +CONFIG_MACH_PCM043=y +CONFIG_MACH_MX35_3DS=y +# CONFIG_MACH_EUKREA_CPUIMX35SD is not set +CONFIG_MACH_VPR200=y + +# +# Device tree only +# +CONFIG_SOC_IMX50=y +CONFIG_MACH_IMX51_DT=y +CONFIG_SOC_IMX53=y +CONFIG_SOC_IMX6=y +CONFIG_SOC_IMX6Q=y +CONFIG_SOC_IMX6SL=y +# CONFIG_SOC_IMX6SX is not set +CONFIG_SOC_VF610=y +CONFIG_IMX_HAVE_PLATFORM_FEC=y +CONFIG_IMX_HAVE_PLATFORM_FLEXCAN=y +CONFIG_IMX_HAVE_PLATFORM_FSL_USB2_UDC=y +CONFIG_IMX_HAVE_PLATFORM_GPIO_KEYS=y +CONFIG_IMX_HAVE_PLATFORM_IMX2_WDT=y +CONFIG_IMX_HAVE_PLATFORM_IMX_FB=y +CONFIG_IMX_HAVE_PLATFORM_IMX_I2C=y +CONFIG_IMX_HAVE_PLATFORM_IMX_KEYPAD=y +CONFIG_IMX_HAVE_PLATFORM_IMX_SSI=y +CONFIG_IMX_HAVE_PLATFORM_IMX_UART=y +CONFIG_IMX_HAVE_PLATFORM_IPU_CORE=y +CONFIG_IMX_HAVE_PLATFORM_MXC_EHCI=y +CONFIG_IMX_HAVE_PLATFORM_MXC_MMC=y +CONFIG_IMX_HAVE_PLATFORM_MXC_NAND=y +CONFIG_IMX_HAVE_PLATFORM_MXC_RNGA=y +CONFIG_IMX_HAVE_PLATFORM_MXC_RTC=y +CONFIG_IMX_HAVE_PLATFORM_MXC_W1=y +CONFIG_IMX_HAVE_PLATFORM_SDHCI_ESDHC_IMX=y +CONFIG_IMX_HAVE_PLATFORM_SPI_IMX=y + +# +# TI OMAP/AM/DM/DRA Family +# +# CONFIG_ARCH_OMAP2 is not set +# CONFIG_ARCH_OMAP3 is not set +# CONFIG_ARCH_OMAP4 is not set +# CONFIG_SOC_OMAP5 is not set +# CONFIG_SOC_AM33XX is not set +# CONFIG_SOC_AM43XX is not set +# CONFIG_SOC_DRA7XX is not set +# CONFIG_ARCH_PICOXCELL is not set +# CONFIG_ARCH_QCOM is not set +# CONFIG_ARCH_ROCKCHIP is not set +# CONFIG_ARCH_SOCFPGA is not set +# CONFIG_PLAT_SPEAR is not set +# CONFIG_ARCH_STI is not set +# CONFIG_ARCH_EXYNOS is not set +# CONFIG_ARCH_SHMOBILE_MULTI is not set +# CONFIG_ARCH_SUNXI is not set +# CONFIG_ARCH_SIRF is not set +# CONFIG_ARCH_TEGRA is not set +# CONFIG_ARCH_U8500 is not set +# CONFIG_ARCH_VEXPRESS is not set +# CONFIG_ARCH_WM8750 is not set +# CONFIG_ARCH_WM8850 is not set +# CONFIG_ARCH_ZYNQ is not set + +# +# Processor Type +# +CONFIG_CPU_V6=y +CONFIG_CPU_V6K=y +CONFIG_CPU_V7=y +CONFIG_CPU_32v6=y +CONFIG_CPU_32v6K=y +CONFIG_CPU_32v7=y +CONFIG_CPU_ABRT_EV6=y +CONFIG_CPU_ABRT_EV7=y +CONFIG_CPU_PABRT_V6=y +CONFIG_CPU_PABRT_V7=y +CONFIG_CPU_CACHE_V6=y +CONFIG_CPU_CACHE_V7=y +CONFIG_CPU_CACHE_VIPT=y +CONFIG_CPU_COPY_V6=y +CONFIG_CPU_TLB_V6=y +CONFIG_CPU_TLB_V7=y +CONFIG_CPU_HAS_ASID=y +CONFIG_CPU_CP15=y +CONFIG_CPU_CP15_MMU=y + +# +# Processor Features +# +# CONFIG_ARCH_PHYS_ADDR_T_64BIT is not set +CONFIG_ARM_THUMB=y +# CONFIG_ARM_THUMBEE is not set +CONFIG_ARM_VIRT_EXT=y +CONFIG_SWP_EMULATE=y +# CONFIG_CPU_ICACHE_DISABLE is not set +# CONFIG_CPU_DCACHE_DISABLE is not set +# CONFIG_CPU_BPREDICT_DISABLE is not set +CONFIG_KUSER_HELPERS=y +CONFIG_DMA_CACHE_RWFO=y +CONFIG_OUTER_CACHE=y +CONFIG_OUTER_CACHE_SYNC=y +CONFIG_MIGHT_HAVE_CACHE_L2X0=y +CONFIG_CACHE_L2X0=y +CONFIG_PL310_ERRATA_588369=y +CONFIG_PL310_ERRATA_727915=y +# CONFIG_PL310_ERRATA_753970 is not set +CONFIG_PL310_ERRATA_769419=y +CONFIG_ARM_L1_CACHE_SHIFT_6=y +CONFIG_ARM_L1_CACHE_SHIFT=6 +CONFIG_ARM_DMA_MEM_BUFFERABLE=y +CONFIG_MULTI_IRQ_HANDLER=y +# CONFIG_ARM_ERRATA_326103 is not set +# CONFIG_ARM_ERRATA_411920 is not set +# CONFIG_ARM_ERRATA_430973 is not set +# CONFIG_ARM_ERRATA_643719 is not set +# CONFIG_ARM_ERRATA_720789 is not set +CONFIG_ARM_ERRATA_754322=y +# CONFIG_ARM_ERRATA_754327 is not set +# CONFIG_ARM_ERRATA_364296 is not set +CONFIG_ARM_ERRATA_764369=y +CONFIG_ARM_ERRATA_775420=y +# CONFIG_ARM_ERRATA_798181 is not set +# CONFIG_ARM_ERRATA_773022 is not set + +# +# Bus support +# +CONFIG_PCI=y +CONFIG_PCI_DOMAINS=y +CONFIG_PCI_SYSCALL=y +# CONFIG_PCI_MSI is not set +# CONFIG_PCI_DEBUG is not set +# CONFIG_PCI_REALLOC_ENABLE_AUTO is not set +# CONFIG_PCI_STUB is not set +# CONFIG_PCI_IOV is not set +# CONFIG_PCI_PRI is not set +# CONFIG_PCI_PASID is not set + +# +# PCI host controller drivers +# +CONFIG_PCIE_DW=y +CONFIG_PCI_IMX6=y +# CONFIG_PCI_HOST_GENERIC is not set +CONFIG_PCIEPORTBUS=y +CONFIG_PCIEAER=y +# CONFIG_PCIE_ECRC is not set +# CONFIG_PCIEAER_INJECT is not set +CONFIG_PCIEASPM=y +# CONFIG_PCIEASPM_DEBUG is not set +CONFIG_PCIEASPM_DEFAULT=y +# CONFIG_PCIEASPM_POWERSAVE is not set +# CONFIG_PCIEASPM_PERFORMANCE is not set +CONFIG_PCIE_PME=y +# CONFIG_PCCARD is not set + +# +# Kernel Features +# +CONFIG_HAVE_SMP=y +CONFIG_SMP=y +CONFIG_SMP_ON_UP=y +CONFIG_ARM_CPU_TOPOLOGY=y +# CONFIG_SCHED_MC is not set +# CONFIG_SCHED_SMT is not set +CONFIG_HAVE_ARM_SCU=y +# CONFIG_HAVE_ARM_ARCH_TIMER is not set +CONFIG_HAVE_ARM_TWD=y +# CONFIG_MCPM is not set +# CONFIG_BIG_LITTLE is not set +# CONFIG_VMSPLIT_3G is not set +CONFIG_VMSPLIT_2G=y +# CONFIG_VMSPLIT_1G is not set +CONFIG_PAGE_OFFSET=0x80000000 +CONFIG_NR_CPUS=4 +CONFIG_HOTPLUG_CPU=y +# CONFIG_ARM_PSCI is not set +CONFIG_ARCH_NR_GPIO=0 +# CONFIG_PREEMPT_NONE is not set +CONFIG_PREEMPT_VOLUNTARY=y +# CONFIG_PREEMPT is not set +CONFIG_HZ_FIXED=0 +CONFIG_HZ_100=y +# CONFIG_HZ_200 is not set +# CONFIG_HZ_250 is not set +# CONFIG_HZ_300 is not set +# CONFIG_HZ_500 is not set +# CONFIG_HZ_1000 is not set +CONFIG_HZ=100 +CONFIG_SCHED_HRTICK=y +CONFIG_AEABI=y +# CONFIG_OABI_COMPAT is not set +# CONFIG_ARCH_SPARSEMEM_DEFAULT is not set +# CONFIG_ARCH_SELECT_MEMORY_MODEL is not set +CONFIG_HAVE_ARCH_PFN_VALID=y +CONFIG_HIGHMEM=y +# CONFIG_HIGHPTE is not set +CONFIG_HW_PERF_EVENTS=y +CONFIG_ARCH_WANT_GENERAL_HUGETLB=y +CONFIG_FLATMEM=y +CONFIG_FLAT_NODE_MEM_MAP=y +CONFIG_HAVE_MEMBLOCK=y +CONFIG_NO_BOOTMEM=y +CONFIG_MEMORY_ISOLATION=y +# CONFIG_HAVE_BOOTMEM_INFO_NODE is not set +CONFIG_PAGEFLAGS_EXTENDED=y +CONFIG_SPLIT_PTLOCK_CPUS=4 +CONFIG_COMPACTION=y +CONFIG_MIGRATION=y +# CONFIG_PHYS_ADDR_T_64BIT is not set +CONFIG_ZONE_DMA_FLAG=0 +CONFIG_BOUNCE=y +# CONFIG_KSM is not set +CONFIG_DEFAULT_MMAP_MIN_ADDR=4096 +# CONFIG_CLEANCACHE is not set +# CONFIG_FRONTSWAP is not set +CONFIG_CMA=y +# CONFIG_CMA_DEBUG is not set +# CONFIG_ZBUD is not set +# CONFIG_ZSMALLOC is not set +CONFIG_FORCE_MAX_ZONEORDER=11 +CONFIG_ALIGNMENT_TRAP=y +# CONFIG_UACCESS_WITH_MEMCPY is not set +# CONFIG_SECCOMP is not set +CONFIG_SWIOTLB=y +CONFIG_IOMMU_HELPER=y + +# +# Boot options +# +CONFIG_USE_OF=y +CONFIG_ATAGS=y +# CONFIG_DEPRECATED_PARAM_STRUCT is not set +CONFIG_ZBOOT_ROM_TEXT=0 +CONFIG_ZBOOT_ROM_BSS=0 +# CONFIG_ARM_APPENDED_DTB is not set +CONFIG_CMDLINE="noinitrd console=ttymxc1,115200 init=/usr/bin/hello root=/dev/m" +# CONFIG_CMDLINE_FROM_BOOTLOADER is not set +# CONFIG_CMDLINE_EXTEND is not set +CONFIG_CMDLINE_FORCE=y +# CONFIG_KEXEC is not set +# CONFIG_CRASH_DUMP is not set +CONFIG_AUTO_ZRELADDR=y + +# +# CPU Power Management +# + +# +# CPU Frequency scaling +# +CONFIG_CPU_FREQ=y +CONFIG_CPU_FREQ_GOV_COMMON=y +CONFIG_CPU_FREQ_STAT=y +# CONFIG_CPU_FREQ_STAT_DETAILS is not set +# CONFIG_CPU_FREQ_DEFAULT_GOV_PERFORMANCE is not set +# CONFIG_CPU_FREQ_DEFAULT_GOV_POWERSAVE is not set +# CONFIG_CPU_FREQ_DEFAULT_GOV_USERSPACE is not set +CONFIG_CPU_FREQ_DEFAULT_GOV_ONDEMAND=y +# CONFIG_CPU_FREQ_DEFAULT_GOV_CONSERVATIVE is not set +CONFIG_CPU_FREQ_GOV_PERFORMANCE=y +# CONFIG_CPU_FREQ_GOV_POWERSAVE is not set +# CONFIG_CPU_FREQ_GOV_USERSPACE is not set +CONFIG_CPU_FREQ_GOV_ONDEMAND=y +# CONFIG_CPU_FREQ_GOV_CONSERVATIVE is not set +# CONFIG_GENERIC_CPUFREQ_CPU0 is not set + +# +# ARM CPU frequency scaling drivers +# +CONFIG_ARM_IMX6Q_CPUFREQ=y +# CONFIG_ARM_KIRKWOOD_CPUFREQ is not set + +# +# CPU Idle +# +# CONFIG_CPU_IDLE is not set +# CONFIG_ARCH_NEEDS_CPU_IDLE_COUPLED is not set + +# +# Floating point emulation +# + +# +# At least one emulation must be selected +# +CONFIG_VFP=y +CONFIG_VFPv3=y +CONFIG_NEON=y +# CONFIG_KERNEL_MODE_NEON is not set + +# +# Userspace binary formats +# +CONFIG_BINFMT_ELF=y +CONFIG_ARCH_BINFMT_ELF_RANDOMIZE_PIE=y +CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS=y +CONFIG_BINFMT_SCRIPT=y +# CONFIG_HAVE_AOUT is not set +CONFIG_BINFMT_MISC=m +CONFIG_COREDUMP=y + +# +# Power management options +# +CONFIG_SUSPEND=y +CONFIG_SUSPEND_FREEZER=y +# CONFIG_HIBERNATION is not set +CONFIG_PM_SLEEP=y +CONFIG_PM_SLEEP_SMP=y +# CONFIG_PM_AUTOSLEEP is not set +# CONFIG_PM_WAKELOCKS is not set +CONFIG_PM_RUNTIME=y +CONFIG_PM=y +CONFIG_PM_DEBUG=y +# CONFIG_PM_ADVANCED_DEBUG is not set +CONFIG_PM_TEST_SUSPEND=y +CONFIG_PM_SLEEP_DEBUG=y +# CONFIG_APM_EMULATION is not set +CONFIG_ARCH_HAS_OPP=y +CONFIG_PM_OPP=y +CONFIG_PM_CLK=y +# CONFIG_WQ_POWER_EFFICIENT_DEFAULT is not set +CONFIG_CPU_PM=y +CONFIG_ARCH_SUSPEND_POSSIBLE=y +CONFIG_ARM_CPU_SUSPEND=y +CONFIG_ARCH_HIBERNATION_POSSIBLE=y +CONFIG_NET=y + +# +# Networking options +# +CONFIG_PACKET=y +# CONFIG_PACKET_DIAG is not set +CONFIG_UNIX=y +# CONFIG_UNIX_DIAG is not set +CONFIG_XFRM=y +# CONFIG_XFRM_USER is not set +# CONFIG_XFRM_SUB_POLICY is not set +# CONFIG_XFRM_MIGRATE is not set +# CONFIG_XFRM_STATISTICS is not set +# CONFIG_NET_KEY is not set +CONFIG_INET=y +# CONFIG_IP_MULTICAST is not set +# CONFIG_IP_ADVANCED_ROUTER is not set +CONFIG_IP_PNP=y +CONFIG_IP_PNP_DHCP=y +# CONFIG_IP_PNP_BOOTP is not set +# CONFIG_IP_PNP_RARP is not set +# CONFIG_NET_IPIP is not set +# CONFIG_NET_IPGRE_DEMUX is not set +CONFIG_NET_IP_TUNNEL=y +# CONFIG_SYN_COOKIES is not set +# CONFIG_INET_AH is not set +# CONFIG_INET_ESP is not set +# CONFIG_INET_IPCOMP is not set +# CONFIG_INET_XFRM_TUNNEL is not set +CONFIG_INET_TUNNEL=y +# CONFIG_INET_XFRM_MODE_TRANSPORT is not set +# CONFIG_INET_XFRM_MODE_TUNNEL is not set +# CONFIG_INET_XFRM_MODE_BEET is not set +# CONFIG_INET_LRO is not set +CONFIG_INET_DIAG=y +CONFIG_INET_TCP_DIAG=y +# CONFIG_INET_UDP_DIAG is not set +# CONFIG_TCP_CONG_ADVANCED is not set +CONFIG_TCP_CONG_CUBIC=y +CONFIG_DEFAULT_TCP_CONG="cubic" +# CONFIG_TCP_MD5SIG is not set +CONFIG_IPV6=y +# CONFIG_IPV6_ROUTER_PREF is not set +# CONFIG_IPV6_OPTIMISTIC_DAD is not set +# CONFIG_INET6_AH is not set +# CONFIG_INET6_ESP is not set +# CONFIG_INET6_IPCOMP is not set +# CONFIG_IPV6_MIP6 is not set +# CONFIG_INET6_XFRM_TUNNEL is not set +# CONFIG_INET6_TUNNEL is not set +CONFIG_INET6_XFRM_MODE_TRANSPORT=y +CONFIG_INET6_XFRM_MODE_TUNNEL=y +CONFIG_INET6_XFRM_MODE_BEET=y +# CONFIG_INET6_XFRM_MODE_ROUTEOPTIMIZATION is not set +# CONFIG_IPV6_VTI is not set +CONFIG_IPV6_SIT=y +# CONFIG_IPV6_SIT_6RD is not set +CONFIG_IPV6_NDISC_NODETYPE=y +# CONFIG_IPV6_TUNNEL is not set +# CONFIG_IPV6_GRE is not set +# CONFIG_IPV6_MULTIPLE_TABLES is not set +# CONFIG_IPV6_MROUTE is not set +# CONFIG_NETWORK_SECMARK is not set +CONFIG_NET_PTP_CLASSIFY=y +# CONFIG_NETWORK_PHY_TIMESTAMPING is not set +CONFIG_NETFILTER=y +# CONFIG_NETFILTER_DEBUG is not set +CONFIG_NETFILTER_ADVANCED=y + +# +# Core Netfilter Configuration +# +# CONFIG_NETFILTER_NETLINK_ACCT is not set +# CONFIG_NETFILTER_NETLINK_QUEUE is not set +# CONFIG_NETFILTER_NETLINK_LOG is not set +# CONFIG_NF_CONNTRACK is not set +# CONFIG_NF_TABLES is not set +# CONFIG_NETFILTER_XTABLES is not set +# CONFIG_IP_SET is not set +# CONFIG_IP_VS is not set + +# +# IP: Netfilter Configuration +# +# CONFIG_NF_DEFRAG_IPV4 is not set +# CONFIG_IP_NF_IPTABLES is not set +# CONFIG_IP_NF_ARPTABLES is not set + +# +# IPv6: Netfilter Configuration +# +# CONFIG_NF_DEFRAG_IPV6 is not set +# CONFIG_IP6_NF_IPTABLES is not set +# CONFIG_IP_DCCP is not set +# CONFIG_IP_SCTP is not set +# CONFIG_RDS is not set +# CONFIG_TIPC is not set +# CONFIG_ATM is not set +# CONFIG_L2TP is not set +# CONFIG_BRIDGE is not set +CONFIG_HAVE_NET_DSA=y +# CONFIG_VLAN_8021Q is not set +# CONFIG_DECNET is not set +# CONFIG_LLC2 is not set +# CONFIG_IPX is not set +# CONFIG_ATALK is not set +# CONFIG_X25 is not set +# CONFIG_LAPB is not set +# CONFIG_PHONET is not set +# CONFIG_IEEE802154 is not set +# CONFIG_NET_SCHED is not set +# CONFIG_DCB is not set +CONFIG_DNS_RESOLVER=y +# CONFIG_BATMAN_ADV is not set +# CONFIG_OPENVSWITCH is not set +# CONFIG_VSOCKETS is not set +# CONFIG_NETLINK_MMAP is not set +# CONFIG_NETLINK_DIAG is not set +# CONFIG_NET_MPLS_GSO is not set +# CONFIG_HSR is not set +CONFIG_RPS=y +CONFIG_RFS_ACCEL=y +CONFIG_XPS=y +# CONFIG_CGROUP_NET_PRIO is not set +# CONFIG_CGROUP_NET_CLASSID is not set +CONFIG_NET_RX_BUSY_POLL=y +CONFIG_BQL=y +# CONFIG_BPF_JIT is not set +CONFIG_NET_FLOW_LIMIT=y + +# +# Network testing +# +# CONFIG_NET_PKTGEN is not set +# CONFIG_HAMRADIO is not set +# CONFIG_CAN is not set +# CONFIG_IRDA is not set +# CONFIG_BT is not set +# CONFIG_AF_RXRPC is not set +CONFIG_WIRELESS=y +CONFIG_CFG80211=y +# CONFIG_NL80211_TESTMODE is not set +# CONFIG_CFG80211_DEVELOPER_WARNINGS is not set +# CONFIG_CFG80211_REG_DEBUG is not set +# CONFIG_CFG80211_CERTIFICATION_ONUS is not set +CONFIG_CFG80211_DEFAULT_PS=y +# CONFIG_CFG80211_DEBUGFS is not set +# CONFIG_CFG80211_INTERNAL_REGDB is not set +# CONFIG_CFG80211_WEXT is not set +# CONFIG_LIB80211 is not set +CONFIG_MAC80211=y +CONFIG_MAC80211_HAS_RC=y +# CONFIG_MAC80211_RC_PID is not set +CONFIG_MAC80211_RC_MINSTREL=y +CONFIG_MAC80211_RC_MINSTREL_HT=y +CONFIG_MAC80211_RC_DEFAULT_MINSTREL=y +CONFIG_MAC80211_RC_DEFAULT="minstrel_ht" +# CONFIG_MAC80211_MESH is not set +# CONFIG_MAC80211_LEDS is not set +# CONFIG_MAC80211_DEBUGFS is not set +# CONFIG_MAC80211_MESSAGE_TRACING is not set +# CONFIG_MAC80211_DEBUG_MENU is not set +# CONFIG_WIMAX is not set +CONFIG_RFKILL=y +CONFIG_RFKILL_LEDS=y +CONFIG_RFKILL_INPUT=y +# CONFIG_RFKILL_REGULATOR is not set +# CONFIG_RFKILL_GPIO is not set +# CONFIG_NET_9P is not set +# CONFIG_CAIF is not set +# CONFIG_CEPH_LIB is not set +# CONFIG_NFC is not set +CONFIG_HAVE_BPF_JIT=y + +# +# Device Drivers +# + +# +# Generic Driver Options +# +CONFIG_UEVENT_HELPER=y +CONFIG_UEVENT_HELPER_PATH="" +CONFIG_DEVTMPFS=y +CONFIG_DEVTMPFS_MOUNT=y +# CONFIG_STANDALONE is not set +CONFIG_PREVENT_FIRMWARE_BUILD=y +CONFIG_FW_LOADER=y +CONFIG_FIRMWARE_IN_KERNEL=y +CONFIG_EXTRA_FIRMWARE="" +CONFIG_FW_LOADER_USER_HELPER=y +# CONFIG_DEBUG_DRIVER is not set +# CONFIG_DEBUG_DEVRES is not set +# CONFIG_SYS_HYPERVISOR is not set +# CONFIG_GENERIC_CPU_DEVICES is not set +CONFIG_SOC_BUS=y +CONFIG_REGMAP=y +CONFIG_REGMAP_I2C=y +CONFIG_REGMAP_SPI=y +CONFIG_REGMAP_MMIO=y +CONFIG_REGMAP_IRQ=y +CONFIG_DMA_SHARED_BUFFER=y +CONFIG_DMA_CMA=y + +# +# Default contiguous memory area size: +# +CONFIG_CMA_SIZE_MBYTES=16 +CONFIG_CMA_SIZE_SEL_MBYTES=y +# CONFIG_CMA_SIZE_SEL_PERCENTAGE is not set +# CONFIG_CMA_SIZE_SEL_MIN is not set +# CONFIG_CMA_SIZE_SEL_MAX is not set +CONFIG_CMA_ALIGNMENT=8 +CONFIG_CMA_AREAS=7 + +# +# Bus devices +# +# CONFIG_BRCMSTB_GISB_ARB is not set +CONFIG_IMX_WEIM=y +# CONFIG_ARM_CCI is not set +# CONFIG_VEXPRESS_CONFIG is not set +CONFIG_CONNECTOR=y +CONFIG_PROC_EVENTS=y +CONFIG_MTD=y +# CONFIG_MTD_TESTS is not set +# CONFIG_MTD_REDBOOT_PARTS is not set +CONFIG_MTD_CMDLINE_PARTS=y +# CONFIG_MTD_AFS_PARTS is not set +CONFIG_MTD_OF_PARTS=y +# CONFIG_MTD_AR7_PARTS is not set + +# +# User Modules And Translation Layers +# +CONFIG_MTD_BLKDEVS=y +CONFIG_MTD_BLOCK=y +# CONFIG_FTL is not set +# CONFIG_NFTL is not set +# CONFIG_INFTL is not set +# CONFIG_RFD_FTL is not set +# CONFIG_SSFDC is not set +# CONFIG_SM_FTL is not set +# CONFIG_MTD_OOPS is not set +# CONFIG_MTD_SWAP is not set + +# +# RAM/ROM/Flash chip drivers +# +CONFIG_MTD_CFI=y +CONFIG_MTD_JEDECPROBE=y +CONFIG_MTD_GEN_PROBE=y +# CONFIG_MTD_CFI_ADV_OPTIONS is not set +CONFIG_MTD_MAP_BANK_WIDTH_1=y +CONFIG_MTD_MAP_BANK_WIDTH_2=y +CONFIG_MTD_MAP_BANK_WIDTH_4=y +# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set +# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set +# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set +CONFIG_MTD_CFI_I1=y +CONFIG_MTD_CFI_I2=y +# CONFIG_MTD_CFI_I4 is not set +# CONFIG_MTD_CFI_I8 is not set +CONFIG_MTD_CFI_INTELEXT=y +CONFIG_MTD_CFI_AMDSTD=y +CONFIG_MTD_CFI_STAA=y +CONFIG_MTD_CFI_UTIL=y +# CONFIG_MTD_RAM is not set +# CONFIG_MTD_ROM is not set +# CONFIG_MTD_ABSENT is not set + +# +# Mapping drivers for chip access +# +# CONFIG_MTD_COMPLEX_MAPPINGS is not set +# CONFIG_MTD_PHYSMAP is not set +CONFIG_MTD_PHYSMAP_OF=y +# CONFIG_MTD_IMPA7 is not set +# CONFIG_MTD_INTEL_VR_NOR is not set +# CONFIG_MTD_PLATRAM is not set + +# +# Self-contained MTD device drivers +# +# CONFIG_MTD_PMC551 is not set +CONFIG_MTD_DATAFLASH=y +# CONFIG_MTD_DATAFLASH_WRITE_VERIFY is not set +# CONFIG_MTD_DATAFLASH_OTP is not set +CONFIG_MTD_M25P80=y +CONFIG_MTD_SST25L=y +# CONFIG_MTD_SLRAM is not set +# CONFIG_MTD_PHRAM is not set +# CONFIG_MTD_MTDRAM is not set +# CONFIG_MTD_BLOCK2MTD is not set + +# +# Disk-On-Chip Device Drivers +# +# CONFIG_MTD_DOCG3 is not set +CONFIG_MTD_NAND_ECC=y +# CONFIG_MTD_NAND_ECC_SMC is not set +CONFIG_MTD_NAND=y +# CONFIG_MTD_NAND_ECC_BCH is not set +# CONFIG_MTD_SM_COMMON is not set +# CONFIG_MTD_NAND_DENALI is not set +# CONFIG_MTD_NAND_GPIO is not set +CONFIG_MTD_NAND_IDS=y +# CONFIG_MTD_NAND_RICOH is not set +# CONFIG_MTD_NAND_DISKONCHIP is not set +# CONFIG_MTD_NAND_DOCG4 is not set +# CONFIG_MTD_NAND_CAFE is not set +# CONFIG_MTD_NAND_NANDSIM is not set +CONFIG_MTD_NAND_GPMI_NAND=y +# CONFIG_MTD_NAND_PLATFORM is not set +CONFIG_MTD_NAND_MXC=y +# CONFIG_MTD_ONENAND is not set + +# +# LPDDR & LPDDR2 PCM memory drivers +# +# CONFIG_MTD_LPDDR is not set +# CONFIG_MTD_LPDDR2_NVM is not set +CONFIG_MTD_SPI_NOR=y +# CONFIG_SPI_FSL_QUADSPI is not set +CONFIG_MTD_UBI=y +CONFIG_MTD_UBI_WL_THRESHOLD=4096 +CONFIG_MTD_UBI_BEB_LIMIT=20 +# CONFIG_MTD_UBI_FASTMAP is not set +# CONFIG_MTD_UBI_GLUEBI is not set +# CONFIG_MTD_UBI_BLOCK is not set +CONFIG_DTC=y +CONFIG_OF=y + +# +# Device Tree and Open Firmware support +# +# CONFIG_OF_SELFTEST is not set +CONFIG_OF_FLATTREE=y +CONFIG_OF_EARLY_FLATTREE=y +CONFIG_OF_ADDRESS=y +CONFIG_OF_ADDRESS_PCI=y +CONFIG_OF_IRQ=y +CONFIG_OF_NET=y +CONFIG_OF_MDIO=y +CONFIG_OF_PCI=y +CONFIG_OF_PCI_IRQ=y +CONFIG_OF_MTD=y +CONFIG_OF_RESERVED_MEM=y +CONFIG_ARCH_MIGHT_HAVE_PC_PARPORT=y +# CONFIG_PARPORT is not set +CONFIG_BLK_DEV=y +# CONFIG_BLK_DEV_NULL_BLK is not set +# CONFIG_BLK_DEV_PCIESSD_MTIP32XX is not set +# CONFIG_BLK_CPQ_CISS_DA is not set +# CONFIG_BLK_DEV_DAC960 is not set +# CONFIG_BLK_DEV_UMEM is not set +# CONFIG_BLK_DEV_COW_COMMON is not set +CONFIG_BLK_DEV_LOOP=y +CONFIG_BLK_DEV_LOOP_MIN_COUNT=8 +# CONFIG_BLK_DEV_CRYPTOLOOP is not set +# CONFIG_BLK_DEV_DRBD is not set +# CONFIG_BLK_DEV_NBD is not set +# CONFIG_BLK_DEV_NVME is not set +# CONFIG_BLK_DEV_SX8 is not set +CONFIG_BLK_DEV_RAM=y +CONFIG_BLK_DEV_RAM_COUNT=16 +CONFIG_BLK_DEV_RAM_SIZE=65536 +# CONFIG_BLK_DEV_XIP is not set +# CONFIG_CDROM_PKTCDVD is not set +# CONFIG_ATA_OVER_ETH is not set +# CONFIG_MG_DISK is not set +# CONFIG_BLK_DEV_RBD is not set +# CONFIG_BLK_DEV_RSXX is not set + +# +# Misc devices +# +# CONFIG_SENSORS_LIS3LV02D is not set +# CONFIG_AD525X_DPOT is not set +# CONFIG_DUMMY_IRQ is not set +# CONFIG_PHANTOM is not set +# CONFIG_SGI_IOC4 is not set +# CONFIG_TIFM_CORE is not set +# CONFIG_ICS932S401 is not set +# CONFIG_ENCLOSURE_SERVICES is not set +# CONFIG_HP_ILO is not set +# CONFIG_APDS9802ALS is not set +# CONFIG_ISL29003 is not set +# CONFIG_ISL29020 is not set +# CONFIG_SENSORS_TSL2550 is not set +# CONFIG_SENSORS_BH1780 is not set +# CONFIG_SENSORS_BH1770 is not set +# CONFIG_SENSORS_APDS990X is not set +# CONFIG_HMC6352 is not set +# CONFIG_DS1682 is not set +# CONFIG_TI_DAC7512 is not set +# CONFIG_BMP085_I2C is not set +# CONFIG_BMP085_SPI is not set +# CONFIG_USB_SWITCH_FSA9480 is not set +# CONFIG_LATTICE_ECP3_CONFIG is not set +CONFIG_SRAM=y +# CONFIG_C2PORT is not set + +# +# EEPROM support +# +CONFIG_EEPROM_AT24=y +CONFIG_EEPROM_AT25=y +# CONFIG_EEPROM_LEGACY is not set +# CONFIG_EEPROM_MAX6875 is not set +# CONFIG_EEPROM_93CX6 is not set +# CONFIG_EEPROM_93XX46 is not set +# CONFIG_CB710_CORE is not set + +# +# Texas Instruments shared transport line discipline +# +# CONFIG_TI_ST is not set +# CONFIG_SENSORS_LIS3_SPI is not set +# CONFIG_SENSORS_LIS3_I2C is not set + +# +# Altera FPGA firmware download module +# +# CONFIG_ALTERA_STAPL is not set + +# +# Intel MIC Host Driver +# + +# +# Intel MIC Card Driver +# +# CONFIG_ECHO is not set +CONFIG_HAVE_IDE=y +# CONFIG_IDE is not set + +# +# SCSI device support +# +CONFIG_SCSI_MOD=y +# CONFIG_RAID_ATTRS is not set +CONFIG_SCSI=y +CONFIG_SCSI_DMA=y +# CONFIG_SCSI_TGT is not set +# CONFIG_SCSI_NETLINK is not set +# CONFIG_SCSI_PROC_FS is not set + +# +# SCSI support type (disk, tape, CD-ROM) +# +CONFIG_BLK_DEV_SD=y +# CONFIG_CHR_DEV_ST is not set +# CONFIG_CHR_DEV_OSST is not set +# CONFIG_BLK_DEV_SR is not set +# CONFIG_CHR_DEV_SG is not set +# CONFIG_CHR_DEV_SCH is not set +CONFIG_SCSI_MULTI_LUN=y +CONFIG_SCSI_CONSTANTS=y +CONFIG_SCSI_LOGGING=y +CONFIG_SCSI_SCAN_ASYNC=y + +# +# SCSI Transports +# +# CONFIG_SCSI_SPI_ATTRS is not set +# CONFIG_SCSI_FC_ATTRS is not set +# CONFIG_SCSI_ISCSI_ATTRS is not set +# CONFIG_SCSI_SAS_ATTRS is not set +# CONFIG_SCSI_SAS_LIBSAS is not set +# CONFIG_SCSI_SRP_ATTRS is not set +# CONFIG_SCSI_LOWLEVEL is not set +# CONFIG_SCSI_DH is not set +# CONFIG_SCSI_OSD_INITIATOR is not set +CONFIG_ATA=y +# CONFIG_ATA_NONSTANDARD is not set +CONFIG_ATA_VERBOSE_ERROR=y +CONFIG_SATA_PMP=y + +# +# Controllers with non-SFF native interface +# +# CONFIG_SATA_AHCI is not set +CONFIG_SATA_AHCI_PLATFORM=y +CONFIG_AHCI_IMX=y +# CONFIG_SATA_INIC162X is not set +# CONFIG_SATA_ACARD_AHCI is not set +# CONFIG_SATA_SIL24 is not set +CONFIG_ATA_SFF=y + +# +# SFF controllers with custom DMA interface +# +# CONFIG_PDC_ADMA is not set +# CONFIG_SATA_QSTOR is not set +# CONFIG_SATA_SX4 is not set +CONFIG_ATA_BMDMA=y + +# +# SATA SFF controllers with BMDMA +# +# CONFIG_ATA_PIIX is not set +# CONFIG_SATA_MV is not set +# CONFIG_SATA_NV is not set +# CONFIG_SATA_PROMISE is not set +# CONFIG_SATA_SIL is not set +# CONFIG_SATA_SIS is not set +# CONFIG_SATA_SVW is not set +# CONFIG_SATA_ULI is not set +# CONFIG_SATA_VIA is not set +# CONFIG_SATA_VITESSE is not set + +# +# PATA SFF controllers with BMDMA +# +# CONFIG_PATA_ALI is not set +# CONFIG_PATA_AMD is not set +# CONFIG_PATA_ARTOP is not set +# CONFIG_PATA_ATIIXP is not set +# CONFIG_PATA_ATP867X is not set +# CONFIG_PATA_CMD64X is not set +# CONFIG_PATA_CYPRESS is not set +# CONFIG_PATA_EFAR is not set +# CONFIG_PATA_HPT366 is not set +# CONFIG_PATA_HPT37X is not set +# CONFIG_PATA_HPT3X2N is not set +# CONFIG_PATA_HPT3X3 is not set +CONFIG_PATA_IMX=y +# CONFIG_PATA_IT8213 is not set +# CONFIG_PATA_IT821X is not set +# CONFIG_PATA_JMICRON is not set +# CONFIG_PATA_MARVELL is not set +# CONFIG_PATA_NETCELL is not set +# CONFIG_PATA_NINJA32 is not set +# CONFIG_PATA_NS87415 is not set +# CONFIG_PATA_OLDPIIX is not set +# CONFIG_PATA_OPTIDMA is not set +# CONFIG_PATA_PDC2027X is not set +# CONFIG_PATA_PDC_OLD is not set +# CONFIG_PATA_RADISYS is not set +# CONFIG_PATA_RDC is not set +# CONFIG_PATA_SCH is not set +# CONFIG_PATA_SERVERWORKS is not set +# CONFIG_PATA_SIL680 is not set +# CONFIG_PATA_SIS is not set +# CONFIG_PATA_TOSHIBA is not set +# CONFIG_PATA_TRIFLEX is not set +# CONFIG_PATA_VIA is not set +# CONFIG_PATA_WINBOND is not set + +# +# PIO-only SFF controllers +# +# CONFIG_PATA_CMD640_PCI is not set +# CONFIG_PATA_MPIIX is not set +# CONFIG_PATA_NS87410 is not set +# CONFIG_PATA_OPTI is not set +# CONFIG_PATA_PLATFORM is not set +# CONFIG_PATA_RZ1000 is not set + +# +# Generic fallback / legacy drivers +# +# CONFIG_ATA_GENERIC is not set +# CONFIG_PATA_LEGACY is not set +# CONFIG_MD is not set +# CONFIG_TARGET_CORE is not set +# CONFIG_FUSION is not set + +# +# IEEE 1394 (FireWire) support +# +# CONFIG_FIREWIRE is not set +# CONFIG_FIREWIRE_NOSY is not set +# CONFIG_I2O is not set +CONFIG_NETDEVICES=y +CONFIG_MII=y +CONFIG_NET_CORE=y +# CONFIG_BONDING is not set +# CONFIG_DUMMY is not set +# CONFIG_EQUALIZER is not set +# CONFIG_NET_FC is not set +# CONFIG_NET_TEAM is not set +# CONFIG_MACVLAN is not set +# CONFIG_VXLAN is not set +# CONFIG_NETCONSOLE is not set +# CONFIG_NETPOLL is not set +# CONFIG_NET_POLL_CONTROLLER is not set +# CONFIG_TUN is not set +# CONFIG_VETH is not set +# CONFIG_NLMON is not set +# CONFIG_ARCNET is not set + +# +# CAIF transport drivers +# + +# +# Distributed Switch Architecture drivers +# +# CONFIG_NET_DSA_MV88E6XXX is not set +# CONFIG_NET_DSA_MV88E6060 is not set +# CONFIG_NET_DSA_MV88E6XXX_NEED_PPU is not set +# CONFIG_NET_DSA_MV88E6131 is not set +# CONFIG_NET_DSA_MV88E6123_61_65 is not set +CONFIG_ETHERNET=y +CONFIG_NET_VENDOR_3COM=y +# CONFIG_VORTEX is not set +# CONFIG_TYPHOON is not set +CONFIG_NET_VENDOR_ADAPTEC=y +# CONFIG_ADAPTEC_STARFIRE is not set +CONFIG_NET_VENDOR_ALTEON=y +# CONFIG_ACENIC is not set +# CONFIG_ALTERA_TSE is not set +CONFIG_NET_VENDOR_AMD=y +# CONFIG_AMD8111_ETH is not set +# CONFIG_PCNET32 is not set +# CONFIG_AMD_XGBE is not set +CONFIG_NET_VENDOR_ARC=y +# CONFIG_ARC_EMAC is not set +CONFIG_NET_VENDOR_ATHEROS=y +# CONFIG_ATL2 is not set +# CONFIG_ATL1 is not set +# CONFIG_ATL1E is not set +# CONFIG_ATL1C is not set +# CONFIG_ALX is not set +CONFIG_NET_CADENCE=y +# CONFIG_NET_VENDOR_BROADCOM is not set +CONFIG_NET_VENDOR_BROCADE=y +# CONFIG_BNA is not set +# CONFIG_NET_CALXEDA_XGMAC is not set +CONFIG_NET_VENDOR_CHELSIO=y +# CONFIG_CHELSIO_T1 is not set +# CONFIG_CHELSIO_T3 is not set +# CONFIG_CHELSIO_T4 is not set +# CONFIG_CHELSIO_T4VF is not set +CONFIG_NET_VENDOR_CIRRUS=y +CONFIG_CS89x0=y +CONFIG_CS89x0_PLATFORM=y +CONFIG_NET_VENDOR_CISCO=y +# CONFIG_ENIC is not set +# CONFIG_DM9000 is not set +# CONFIG_DNET is not set +CONFIG_NET_VENDOR_DEC=y +# CONFIG_NET_TULIP is not set +CONFIG_NET_VENDOR_DLINK=y +# CONFIG_DL2K is not set +# CONFIG_SUNDANCE is not set +CONFIG_NET_VENDOR_EMULEX=y +# CONFIG_BE2NET is not set +CONFIG_NET_VENDOR_EXAR=y +# CONFIG_S2IO is not set +# CONFIG_VXGE is not set +# CONFIG_NET_VENDOR_FARADAY is not set +CONFIG_NET_VENDOR_FREESCALE=y +CONFIG_FEC=y +CONFIG_NET_VENDOR_HISILICON=y +# CONFIG_HIX5HD2_GMAC is not set +CONFIG_NET_VENDOR_HP=y +# CONFIG_HP100 is not set +# CONFIG_NET_VENDOR_INTEL is not set +# CONFIG_IP1000 is not set +# CONFIG_JME is not set +# CONFIG_NET_VENDOR_MARVELL is not set +CONFIG_NET_VENDOR_MELLANOX=y +# CONFIG_MLX4_EN is not set +# CONFIG_MLX4_CORE is not set +# CONFIG_MLX5_CORE is not set +# CONFIG_NET_VENDOR_MICREL is not set +# CONFIG_NET_VENDOR_MICROCHIP is not set +CONFIG_NET_VENDOR_MYRI=y +# CONFIG_MYRI10GE is not set +# CONFIG_FEALNX is not set +# CONFIG_NET_VENDOR_NATSEMI is not set +CONFIG_NET_VENDOR_NVIDIA=y +# CONFIG_FORCEDETH is not set +CONFIG_NET_VENDOR_OKI=y +# CONFIG_ETHOC is not set +CONFIG_NET_PACKET_ENGINE=y +# CONFIG_HAMACHI is not set +# CONFIG_YELLOWFIN is not set +CONFIG_NET_VENDOR_QLOGIC=y +# CONFIG_QLA3XXX is not set +# CONFIG_QLCNIC is not set +# CONFIG_QLGE is not set +# CONFIG_NETXEN_NIC is not set +CONFIG_NET_VENDOR_REALTEK=y +# CONFIG_8139CP is not set +# CONFIG_8139TOO is not set +# CONFIG_R8169 is not set +# CONFIG_SH_ETH is not set +CONFIG_NET_VENDOR_RDC=y +# CONFIG_R6040 is not set +CONFIG_NET_VENDOR_SAMSUNG=y +# CONFIG_SXGBE_ETH is not set +# CONFIG_NET_VENDOR_SEEQ is not set +CONFIG_NET_VENDOR_SILAN=y +# CONFIG_SC92031 is not set +CONFIG_NET_VENDOR_SIS=y +# CONFIG_SIS900 is not set +# CONFIG_SIS190 is not set +# CONFIG_SFC is not set +CONFIG_NET_VENDOR_SMSC=y +CONFIG_SMC91X=y +# CONFIG_EPIC100 is not set +CONFIG_SMC911X=y +CONFIG_SMSC911X=y +# CONFIG_SMSC911X_ARCH_HOOKS is not set +# CONFIG_SMSC9420 is not set +# CONFIG_NET_VENDOR_STMICRO is not set +CONFIG_NET_VENDOR_SUN=y +# CONFIG_HAPPYMEAL is not set +# CONFIG_SUNGEM is not set +# CONFIG_CASSINI is not set +# CONFIG_NIU is not set +CONFIG_NET_VENDOR_TEHUTI=y +# CONFIG_TEHUTI is not set +CONFIG_NET_VENDOR_TI=y +# CONFIG_TLAN is not set +CONFIG_NET_VENDOR_VIA=y +# CONFIG_VIA_RHINE is not set +# CONFIG_VIA_VELOCITY is not set +CONFIG_NET_VENDOR_WIZNET=y +# CONFIG_WIZNET_W5100 is not set +# CONFIG_WIZNET_W5300 is not set +# CONFIG_FDDI is not set +# CONFIG_HIPPI is not set +CONFIG_PHYLIB=y + +# +# MII PHY device drivers +# +CONFIG_AT803X_PHY=y +# CONFIG_AMD_PHY is not set +# CONFIG_AMD_XGBE_PHY is not set +# CONFIG_MARVELL_PHY is not set +# CONFIG_DAVICOM_PHY is not set +# CONFIG_QSEMI_PHY is not set +# CONFIG_LXT_PHY is not set +# CONFIG_CICADA_PHY is not set +# CONFIG_VITESSE_PHY is not set +# CONFIG_SMSC_PHY is not set +# CONFIG_BROADCOM_PHY is not set +# CONFIG_BCM7XXX_PHY is not set +# CONFIG_BCM87XX_PHY is not set +# CONFIG_ICPLUS_PHY is not set +# CONFIG_REALTEK_PHY is not set +# CONFIG_NATIONAL_PHY is not set +# CONFIG_STE10XP is not set +# CONFIG_LSI_ET1011C_PHY is not set +# CONFIG_MICREL_PHY is not set +# CONFIG_FIXED_PHY is not set +# CONFIG_MDIO_BITBANG is not set +# CONFIG_MDIO_BUS_MUX_GPIO is not set +# CONFIG_MDIO_BUS_MUX_MMIOREG is not set +# CONFIG_MICREL_KS8995MA is not set +# CONFIG_PPP is not set +# CONFIG_SLIP is not set + +# +# USB Network Adapters +# +# CONFIG_USB_CATC is not set +# CONFIG_USB_KAWETH is not set +# CONFIG_USB_PEGASUS is not set +# CONFIG_USB_RTL8150 is not set +# CONFIG_USB_RTL8152 is not set +# CONFIG_USB_USBNET is not set +# CONFIG_USB_HSO is not set +# CONFIG_USB_IPHETH is not set +CONFIG_WLAN=y +# CONFIG_LIBERTAS_THINFIRM is not set +# CONFIG_ATMEL is not set +# CONFIG_AT76C50X_USB is not set +# CONFIG_PRISM54 is not set +# CONFIG_USB_ZD1201 is not set +# CONFIG_USB_NET_RNDIS_WLAN is not set +# CONFIG_RTL8180 is not set +# CONFIG_RTL8187 is not set +# CONFIG_ADM8211 is not set +# CONFIG_MAC80211_HWSIM is not set +# CONFIG_MWL8K is not set +# CONFIG_ATH_CARDS is not set +# CONFIG_B43 is not set +# CONFIG_B43LEGACY is not set +CONFIG_BRCMUTIL=m +# CONFIG_BRCMSMAC is not set +CONFIG_BRCMFMAC=m +CONFIG_BRCMFMAC_SDIO=y +# CONFIG_BRCMFMAC_USB is not set +# CONFIG_BRCM_TRACING is not set +# CONFIG_BRCMDBG is not set +# CONFIG_HOSTAP is not set +# CONFIG_IPW2100 is not set +# CONFIG_IWLWIFI is not set +# CONFIG_IWL4965 is not set +# CONFIG_IWL3945 is not set +# CONFIG_LIBERTAS is not set +# CONFIG_P54_COMMON is not set +# CONFIG_RT2X00 is not set +CONFIG_RTL_CARDS=y +# CONFIG_RTL8192CE is not set +# CONFIG_RTL8192SE is not set +# CONFIG_RTL8192DE is not set +# CONFIG_RTL8723AE is not set +# CONFIG_RTL8723BE is not set +# CONFIG_RTL8188EE is not set +# CONFIG_RTL8192CU is not set +# CONFIG_WL_TI is not set +# CONFIG_ZD1211RW is not set +# CONFIG_MWIFIEX is not set +# CONFIG_CW1200 is not set +# CONFIG_RSI_91X is not set + +# +# Enable WiMAX (Networking options) to see the WiMAX drivers +# +# CONFIG_WAN is not set +# CONFIG_VMXNET3 is not set +# CONFIG_ISDN is not set + +# +# Input device support +# +CONFIG_INPUT=y +# CONFIG_INPUT_FF_MEMLESS is not set +CONFIG_INPUT_POLLDEV=y +# CONFIG_INPUT_SPARSEKMAP is not set +CONFIG_INPUT_MATRIXKMAP=y + +# +# Userland interfaces +# +CONFIG_INPUT_MOUSEDEV=y +# CONFIG_INPUT_MOUSEDEV_PSAUX is not set +CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024 +CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768 +# CONFIG_INPUT_JOYDEV is not set +CONFIG_INPUT_EVDEV=y +CONFIG_INPUT_EVBUG=m + +# +# Input Device Drivers +# +CONFIG_INPUT_KEYBOARD=y +# CONFIG_KEYBOARD_ADP5588 is not set +# CONFIG_KEYBOARD_ADP5589 is not set +CONFIG_KEYBOARD_ATKBD=y +# CONFIG_KEYBOARD_QT1070 is not set +# CONFIG_KEYBOARD_QT2160 is not set +# CONFIG_KEYBOARD_LKKBD is not set +CONFIG_KEYBOARD_GPIO=y +# CONFIG_KEYBOARD_GPIO_POLLED is not set +# CONFIG_KEYBOARD_TCA6416 is not set +# CONFIG_KEYBOARD_TCA8418 is not set +# CONFIG_KEYBOARD_MATRIX is not set +# CONFIG_KEYBOARD_LM8323 is not set +# CONFIG_KEYBOARD_LM8333 is not set +# CONFIG_KEYBOARD_MAX7359 is not set +# CONFIG_KEYBOARD_MCS is not set +# CONFIG_KEYBOARD_MPR121 is not set +CONFIG_KEYBOARD_IMX=y +# CONFIG_KEYBOARD_NEWTON is not set +# CONFIG_KEYBOARD_OPENCORES is not set +# CONFIG_KEYBOARD_SAMSUNG is not set +# CONFIG_KEYBOARD_STOWAWAY is not set +# CONFIG_KEYBOARD_SUNKBD is not set +# CONFIG_KEYBOARD_STMPE is not set +# CONFIG_KEYBOARD_OMAP4 is not set +# CONFIG_KEYBOARD_XTKBD is not set +CONFIG_INPUT_MOUSE=y +CONFIG_MOUSE_PS2=m +CONFIG_MOUSE_PS2_ALPS=y +CONFIG_MOUSE_PS2_LOGIPS2PP=y +CONFIG_MOUSE_PS2_SYNAPTICS=y +CONFIG_MOUSE_PS2_CYPRESS=y +CONFIG_MOUSE_PS2_TRACKPOINT=y +CONFIG_MOUSE_PS2_ELANTECH=y +# CONFIG_MOUSE_PS2_SENTELIC is not set +# CONFIG_MOUSE_PS2_TOUCHKIT is not set +# CONFIG_MOUSE_SERIAL is not set +# CONFIG_MOUSE_APPLETOUCH is not set +# CONFIG_MOUSE_BCM5974 is not set +# CONFIG_MOUSE_CYAPA is not set +# CONFIG_MOUSE_VSXXXAA is not set +# CONFIG_MOUSE_GPIO is not set +# CONFIG_MOUSE_SYNAPTICS_I2C is not set +# CONFIG_MOUSE_SYNAPTICS_USB is not set +# CONFIG_INPUT_JOYSTICK is not set +# CONFIG_INPUT_TABLET is not set +CONFIG_INPUT_TOUCHSCREEN=y +CONFIG_OF_TOUCHSCREEN=y +# CONFIG_TOUCHSCREEN_ADS7846 is not set +# CONFIG_TOUCHSCREEN_AD7877 is not set +# CONFIG_TOUCHSCREEN_AD7879 is not set +# CONFIG_TOUCHSCREEN_ATMEL_MXT is not set +# CONFIG_TOUCHSCREEN_AUO_PIXCIR is not set +# CONFIG_TOUCHSCREEN_BU21013 is not set +# CONFIG_TOUCHSCREEN_CY8CTMG110 is not set +# CONFIG_TOUCHSCREEN_CYTTSP_CORE is not set +# CONFIG_TOUCHSCREEN_CYTTSP4_CORE is not set +# CONFIG_TOUCHSCREEN_DA9052 is not set +# CONFIG_TOUCHSCREEN_DYNAPRO is not set +# CONFIG_TOUCHSCREEN_HAMPSHIRE is not set +# CONFIG_TOUCHSCREEN_EETI is not set +CONFIG_TOUCHSCREEN_EGALAX=y +# CONFIG_TOUCHSCREEN_FUJITSU is not set +# CONFIG_TOUCHSCREEN_ILI210X is not set +# CONFIG_TOUCHSCREEN_GUNZE is not set +# CONFIG_TOUCHSCREEN_ELO is not set +# CONFIG_TOUCHSCREEN_WACOM_W8001 is not set +# CONFIG_TOUCHSCREEN_WACOM_I2C is not set +# CONFIG_TOUCHSCREEN_MAX11801 is not set +# CONFIG_TOUCHSCREEN_MCS5000 is not set +# CONFIG_TOUCHSCREEN_MMS114 is not set +# CONFIG_TOUCHSCREEN_MTOUCH is not set +# CONFIG_TOUCHSCREEN_INEXIO is not set +# CONFIG_TOUCHSCREEN_MK712 is not set +# CONFIG_TOUCHSCREEN_PENMOUNT is not set +# CONFIG_TOUCHSCREEN_EDT_FT5X06 is not set +# CONFIG_TOUCHSCREEN_TOUCHRIGHT is not set +# CONFIG_TOUCHSCREEN_TOUCHWIN is not set +# CONFIG_TOUCHSCREEN_PIXCIR is not set +# CONFIG_TOUCHSCREEN_WM97XX is not set +# CONFIG_TOUCHSCREEN_USB_COMPOSITE is not set +CONFIG_TOUCHSCREEN_MC13783=y +# CONFIG_TOUCHSCREEN_TOUCHIT213 is not set +# CONFIG_TOUCHSCREEN_TSC_SERIO is not set +# CONFIG_TOUCHSCREEN_TSC2005 is not set +CONFIG_TOUCHSCREEN_TSC2007=y +# CONFIG_TOUCHSCREEN_ST1232 is not set +CONFIG_TOUCHSCREEN_STMPE=y +# CONFIG_TOUCHSCREEN_SUR40 is not set +# CONFIG_TOUCHSCREEN_TPS6507X is not set +# CONFIG_TOUCHSCREEN_ZFORCE is not set +CONFIG_INPUT_MISC=y +# CONFIG_INPUT_AD714X is not set +# CONFIG_INPUT_BMA150 is not set +# CONFIG_INPUT_MC13783_PWRBUTTON is not set +CONFIG_INPUT_MMA8450=y +# CONFIG_INPUT_MPU3050 is not set +# CONFIG_INPUT_GP2A is not set +# CONFIG_INPUT_GPIO_BEEPER is not set +# CONFIG_INPUT_GPIO_TILT_POLLED is not set +# CONFIG_INPUT_ATI_REMOTE2 is not set +# CONFIG_INPUT_KEYSPAN_REMOTE is not set +# CONFIG_INPUT_KXTJ9 is not set +# CONFIG_INPUT_POWERMATE is not set +# CONFIG_INPUT_YEALINK is not set +# CONFIG_INPUT_CM109 is not set +# CONFIG_INPUT_UINPUT is not set +# CONFIG_INPUT_PCF8574 is not set +# CONFIG_INPUT_PWM_BEEPER is not set +# CONFIG_INPUT_GPIO_ROTARY_ENCODER is not set +# CONFIG_INPUT_DA9052_ONKEY is not set +# CONFIG_INPUT_ADXL34X is not set +# CONFIG_INPUT_IMS_PCU is not set +# CONFIG_INPUT_CMA3000 is not set +# CONFIG_INPUT_SOC_BUTTON_ARRAY is not set + +# +# Hardware I/O ports +# +CONFIG_SERIO=y +CONFIG_SERIO_SERPORT=m +# CONFIG_SERIO_PCIPS2 is not set +CONFIG_SERIO_LIBPS2=y +# CONFIG_SERIO_RAW is not set +# CONFIG_SERIO_ALTERA_PS2 is not set +# CONFIG_SERIO_PS2MULT is not set +# CONFIG_SERIO_ARC_PS2 is not set +# CONFIG_SERIO_APBPS2 is not set +# CONFIG_GAMEPORT is not set + +# +# Character devices +# +CONFIG_TTY=y +CONFIG_VT=y +CONFIG_CONSOLE_TRANSLATIONS=y +CONFIG_VT_CONSOLE=y +CONFIG_VT_CONSOLE_SLEEP=y +CONFIG_HW_CONSOLE=y +CONFIG_VT_HW_CONSOLE_BINDING=y +CONFIG_UNIX98_PTYS=y +# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set +# CONFIG_LEGACY_PTYS is not set +# CONFIG_SERIAL_NONSTANDARD is not set +# CONFIG_NOZOMI is not set +# CONFIG_N_GSM is not set +# CONFIG_TRACE_SINK is not set +# CONFIG_DEVKMEM is not set + +# +# Serial drivers +# +# CONFIG_SERIAL_8250 is not set + +# +# Non-8250 serial port support +# +# CONFIG_SERIAL_EARLYCON_ARM_SEMIHOST is not set +# CONFIG_SERIAL_MAX3100 is not set +# CONFIG_SERIAL_MAX310X is not set +# CONFIG_SERIAL_MFD_HSU is not set +CONFIG_SERIAL_IMX=y +CONFIG_SERIAL_IMX_CONSOLE=y +CONFIG_SERIAL_CORE=y +CONFIG_SERIAL_CORE_CONSOLE=y +# CONFIG_SERIAL_JSM is not set +# CONFIG_SERIAL_SCCNXP is not set +# CONFIG_SERIAL_SC16IS7XX is not set +# CONFIG_SERIAL_ALTERA_JTAGUART is not set +# CONFIG_SERIAL_ALTERA_UART is not set +# CONFIG_SERIAL_IFX6X60 is not set +# CONFIG_SERIAL_XILINX_PS_UART is not set +# CONFIG_SERIAL_ARC is not set +# CONFIG_SERIAL_RP2 is not set +CONFIG_SERIAL_FSL_LPUART=y +CONFIG_SERIAL_FSL_LPUART_CONSOLE=y +# CONFIG_SERIAL_ST_ASC is not set +# CONFIG_TTY_PRINTK is not set +# CONFIG_HVC_DCC is not set +# CONFIG_IPMI_HANDLER is not set +CONFIG_HW_RANDOM=y +# CONFIG_HW_RANDOM_TIMERIOMEM is not set +CONFIG_HW_RANDOM_MXC_RNGA=y +# CONFIG_R3964 is not set +# CONFIG_APPLICOM is not set +# CONFIG_RAW_DRIVER is not set +# CONFIG_TCG_TPM is not set +CONFIG_DEVPORT=y +CONFIG_I2C=y +CONFIG_I2C_BOARDINFO=y +# CONFIG_I2C_COMPAT is not set +CONFIG_I2C_CHARDEV=y +CONFIG_I2C_MUX=y + +# +# Multiplexer I2C Chip support +# +# CONFIG_I2C_ARB_GPIO_CHALLENGE is not set +# CONFIG_I2C_MUX_GPIO is not set +# CONFIG_I2C_MUX_PCA9541 is not set +# CONFIG_I2C_MUX_PCA954x is not set +# CONFIG_I2C_MUX_PINCTRL is not set +# CONFIG_I2C_HELPER_AUTO is not set +# CONFIG_I2C_SMBUS is not set + +# +# I2C Algorithms +# +CONFIG_I2C_ALGOBIT=y +CONFIG_I2C_ALGOPCF=m +CONFIG_I2C_ALGOPCA=m + +# +# I2C Hardware Bus support +# + +# +# PC SMBus host controller drivers +# +# CONFIG_I2C_ALI1535 is not set +# CONFIG_I2C_ALI1563 is not set +# CONFIG_I2C_ALI15X3 is not set +# CONFIG_I2C_AMD756 is not set +# CONFIG_I2C_AMD8111 is not set +# CONFIG_I2C_I801 is not set +# CONFIG_I2C_ISCH is not set +# CONFIG_I2C_PIIX4 is not set +# CONFIG_I2C_NFORCE2 is not set +# CONFIG_I2C_SIS5595 is not set +# CONFIG_I2C_SIS630 is not set +# CONFIG_I2C_SIS96X is not set +# CONFIG_I2C_VIA is not set +# CONFIG_I2C_VIAPRO is not set + +# +# I2C system bus drivers (mostly embedded / system-on-chip) +# +# CONFIG_I2C_CBUS_GPIO is not set +# CONFIG_I2C_DESIGNWARE_PLATFORM is not set +# CONFIG_I2C_DESIGNWARE_PCI is not set +# CONFIG_I2C_GPIO is not set +CONFIG_I2C_IMX=y +# CONFIG_I2C_OCORES is not set +# CONFIG_I2C_PCA_PLATFORM is not set +# CONFIG_I2C_PXA_PCI is not set +# CONFIG_I2C_RK3X is not set +# CONFIG_I2C_SIMTEC is not set +# CONFIG_I2C_XILINX is not set + +# +# External I2C/SMBus adapter drivers +# +# CONFIG_I2C_DIOLAN_U2C is not set +# CONFIG_I2C_PARPORT_LIGHT is not set +# CONFIG_I2C_ROBOTFUZZ_OSIF is not set +# CONFIG_I2C_TAOS_EVM is not set +# CONFIG_I2C_TINY_USB is not set + +# +# Other I2C/SMBus bus drivers +# +# CONFIG_I2C_STUB is not set +# CONFIG_I2C_DEBUG_CORE is not set +# CONFIG_I2C_DEBUG_ALGO is not set +# CONFIG_I2C_DEBUG_BUS is not set +CONFIG_SPI=y +# CONFIG_SPI_DEBUG is not set +CONFIG_SPI_MASTER=y + +# +# SPI Master Controller Drivers +# +# CONFIG_SPI_ALTERA is not set +CONFIG_SPI_BITBANG=y +# CONFIG_SPI_CADENCE is not set +# CONFIG_SPI_GPIO is not set +CONFIG_SPI_IMX=y +# CONFIG_SPI_FSL_SPI is not set +# CONFIG_SPI_FSL_DSPI is not set +# CONFIG_SPI_OC_TINY is not set +# CONFIG_SPI_PXA2XX is not set +# CONFIG_SPI_PXA2XX_PCI is not set +# CONFIG_SPI_SC18IS602 is not set +# CONFIG_SPI_XCOMM is not set +# CONFIG_SPI_XILINX is not set +# CONFIG_SPI_DESIGNWARE is not set + +# +# SPI Protocol Masters +# +# CONFIG_SPI_SPIDEV is not set +# CONFIG_SPI_TLE62X0 is not set +# CONFIG_SPMI is not set +# CONFIG_HSI is not set + +# +# PPS support +# +CONFIG_PPS=y +# CONFIG_PPS_DEBUG is not set + +# +# PPS clients support +# +# CONFIG_PPS_CLIENT_KTIMER is not set +# CONFIG_PPS_CLIENT_LDISC is not set +# CONFIG_PPS_CLIENT_GPIO is not set + +# +# PPS generators support +# + +# +# PTP clock support +# +CONFIG_PTP_1588_CLOCK=y + +# +# Enable PHYLIB and NETWORK_PHY_TIMESTAMPING to see the additional clocks. +# +CONFIG_PINCTRL=y + +# +# Pin controllers +# +CONFIG_PINMUX=y +CONFIG_PINCONF=y +# CONFIG_DEBUG_PINCTRL is not set +# CONFIG_PINCTRL_BCM281XX is not set +CONFIG_PINCTRL_IMX=y +CONFIG_PINCTRL_IMX35=y +CONFIG_PINCTRL_IMX50=y +CONFIG_PINCTRL_IMX51=y +CONFIG_PINCTRL_IMX53=y +CONFIG_PINCTRL_IMX6Q=y +CONFIG_PINCTRL_IMX6SL=y +CONFIG_PINCTRL_VF610=y +# CONFIG_PINCTRL_APQ8064 is not set +# CONFIG_PINCTRL_IPQ8064 is not set +# CONFIG_PINCTRL_SINGLE is not set +CONFIG_ARCH_HAVE_CUSTOM_GPIO_H=y +CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y +CONFIG_ARCH_REQUIRE_GPIOLIB=y +CONFIG_GPIOLIB=y +CONFIG_GPIO_DEVRES=y +CONFIG_OF_GPIO=y +# CONFIG_DEBUG_GPIO is not set +CONFIG_GPIO_SYSFS=y +CONFIG_GPIO_GENERIC=y +# CONFIG_GPIO_DA9052 is not set + +# +# Memory mapped GPIO drivers: +# +# CONFIG_GPIO_GENERIC_PLATFORM is not set +# CONFIG_GPIO_DWAPB is not set +# CONFIG_GPIO_EM is not set +# CONFIG_GPIO_ZEVIO is not set +CONFIG_GPIO_MXC=y +# CONFIG_GPIO_SCH311X is not set +# CONFIG_GPIO_SYSCON is not set +# CONFIG_GPIO_VX855 is not set +# CONFIG_GPIO_GRGPIO is not set + +# +# I2C GPIO expanders: +# +# CONFIG_GPIO_MAX7300 is not set +# CONFIG_GPIO_MAX732X is not set +CONFIG_GPIO_MC9S08DZ60=y +# CONFIG_GPIO_PCA953X is not set +# CONFIG_GPIO_PCF857X is not set +# CONFIG_GPIO_SX150X is not set +# CONFIG_GPIO_STMPE is not set +# CONFIG_GPIO_ADP5588 is not set +# CONFIG_GPIO_ADNP is not set + +# +# PCI GPIO expanders: +# +# CONFIG_GPIO_BT8XX is not set +# CONFIG_GPIO_AMD8111 is not set +# CONFIG_GPIO_ML_IOH is not set +# CONFIG_GPIO_RDC321X is not set + +# +# SPI GPIO expanders: +# +# CONFIG_GPIO_MAX7301 is not set +# CONFIG_GPIO_MCP23S08 is not set +# CONFIG_GPIO_MC33880 is not set +# CONFIG_GPIO_74X164 is not set + +# +# AC97 GPIO expanders: +# + +# +# LPC GPIO expanders: +# + +# +# MODULbus GPIO expanders: +# +# CONFIG_GPIO_BCM_KONA is not set + +# +# USB GPIO expanders: +# +# CONFIG_W1 is not set +# CONFIG_POWER_SUPPLY is not set +# CONFIG_POWER_AVS is not set +# CONFIG_HWMON is not set +# CONFIG_THERMAL is not set +CONFIG_WATCHDOG=y +CONFIG_WATCHDOG_CORE=y +# CONFIG_WATCHDOG_NOWAYOUT is not set + +# +# Watchdog Device Drivers +# +# CONFIG_SOFT_WATCHDOG is not set +# CONFIG_DA9052_WATCHDOG is not set +# CONFIG_GPIO_WATCHDOG is not set +# CONFIG_XILINX_WATCHDOG is not set +# CONFIG_DW_WATCHDOG is not set +# CONFIG_MAX63XX_WATCHDOG is not set +CONFIG_IMX2_WDT=y +# CONFIG_ALIM7101_WDT is not set +# CONFIG_I6300ESB_WDT is not set +# CONFIG_MEN_A21_WDT is not set + +# +# PCI-based Watchdog Cards +# +# CONFIG_PCIPCWATCHDOG is not set +# CONFIG_WDTPCI is not set + +# +# USB-based Watchdog Cards +# +# CONFIG_USBPCWATCHDOG is not set +CONFIG_SSB_POSSIBLE=y + +# +# Sonics Silicon Backplane +# +# CONFIG_SSB is not set +CONFIG_BCMA_POSSIBLE=y + +# +# Broadcom specific AMBA +# +# CONFIG_BCMA is not set + +# +# Multifunction device drivers +# +CONFIG_MFD_CORE=y +# CONFIG_MFD_AS3711 is not set +# CONFIG_MFD_AS3722 is not set +# CONFIG_PMIC_ADP5520 is not set +# CONFIG_MFD_AAT2870_CORE is not set +# CONFIG_MFD_BCM590XX is not set +# CONFIG_MFD_AXP20X is not set +# CONFIG_MFD_CROS_EC is not set +# CONFIG_MFD_ASIC3 is not set +# CONFIG_PMIC_DA903X is not set +CONFIG_PMIC_DA9052=y +# CONFIG_MFD_DA9052_SPI is not set +CONFIG_MFD_DA9052_I2C=y +# CONFIG_MFD_DA9055 is not set +# CONFIG_MFD_DA9063 is not set +CONFIG_MFD_MC13XXX=y +CONFIG_MFD_MC13XXX_SPI=y +CONFIG_MFD_MC13XXX_I2C=y +# CONFIG_HTC_EGPIO is not set +# CONFIG_HTC_PASIC3 is not set +# CONFIG_HTC_I2CPLD is not set +# CONFIG_LPC_ICH is not set +# CONFIG_LPC_SCH is not set +# CONFIG_MFD_JANZ_CMODIO is not set +# CONFIG_MFD_KEMPLD is not set +# CONFIG_MFD_88PM800 is not set +# CONFIG_MFD_88PM805 is not set +# CONFIG_MFD_88PM860X is not set +# CONFIG_MFD_MAX14577 is not set +# CONFIG_MFD_MAX77686 is not set +# CONFIG_MFD_MAX77693 is not set +# CONFIG_MFD_MAX8907 is not set +# CONFIG_MFD_MAX8925 is not set +# CONFIG_MFD_MAX8997 is not set +# CONFIG_MFD_MAX8998 is not set +# CONFIG_EZX_PCAP is not set +# CONFIG_MFD_VIPERBOARD is not set +# CONFIG_MFD_RETU is not set +# CONFIG_MFD_PCF50633 is not set +# CONFIG_UCB1400_CORE is not set +# CONFIG_MFD_PM8921_CORE is not set +# CONFIG_MFD_RDC321X is not set +# CONFIG_MFD_RTSX_PCI is not set +# CONFIG_MFD_RTSX_USB is not set +# CONFIG_MFD_RC5T583 is not set +# CONFIG_MFD_SEC_CORE is not set +# CONFIG_MFD_SI476X_CORE is not set +# CONFIG_MFD_SM501 is not set +# CONFIG_MFD_SMSC is not set +# CONFIG_ABX500_CORE is not set +CONFIG_MFD_STMPE=y + +# +# STMicroelectronics STMPE Interface Drivers +# +CONFIG_STMPE_I2C=y +# CONFIG_STMPE_SPI is not set +CONFIG_MFD_SYSCON=y +# CONFIG_MFD_TI_AM335X_TSCADC is not set +# CONFIG_MFD_LP3943 is not set +# CONFIG_MFD_LP8788 is not set +# CONFIG_MFD_PALMAS is not set +# CONFIG_TPS6105X is not set +# CONFIG_TPS65010 is not set +# CONFIG_TPS6507X is not set +# CONFIG_MFD_TPS65090 is not set +# CONFIG_MFD_TPS65217 is not set +# CONFIG_MFD_TPS65218 is not set +# CONFIG_MFD_TPS6586X is not set +# CONFIG_MFD_TPS65910 is not set +# CONFIG_MFD_TPS65912 is not set +# CONFIG_MFD_TPS65912_I2C is not set +# CONFIG_MFD_TPS65912_SPI is not set +# CONFIG_MFD_TPS80031 is not set +# CONFIG_TWL4030_CORE is not set +# CONFIG_TWL6040_CORE is not set +# CONFIG_MFD_WL1273_CORE is not set +# CONFIG_MFD_LM3533 is not set +# CONFIG_MFD_TIMBERDALE is not set +# CONFIG_MFD_TC3589X is not set +# CONFIG_MFD_TMIO is not set +# CONFIG_MFD_T7L66XB is not set +# CONFIG_MFD_TC6387XB is not set +# CONFIG_MFD_TC6393XB is not set +# CONFIG_MFD_VX855 is not set +# CONFIG_MFD_ARIZONA_I2C is not set +# CONFIG_MFD_ARIZONA_SPI is not set +# CONFIG_MFD_WM8400 is not set +# CONFIG_MFD_WM831X_I2C is not set +# CONFIG_MFD_WM831X_SPI is not set +# CONFIG_MFD_WM8350_I2C is not set +# CONFIG_MFD_WM8994 is not set +CONFIG_REGULATOR=y +# CONFIG_REGULATOR_DEBUG is not set +CONFIG_REGULATOR_FIXED_VOLTAGE=y +# CONFIG_REGULATOR_VIRTUAL_CONSUMER is not set +# CONFIG_REGULATOR_USERSPACE_CONSUMER is not set +# CONFIG_REGULATOR_ACT8865 is not set +# CONFIG_REGULATOR_AD5398 is not set +CONFIG_REGULATOR_ANATOP=y +CONFIG_REGULATOR_DA9052=y +# CONFIG_REGULATOR_DA9210 is not set +# CONFIG_REGULATOR_FAN53555 is not set +CONFIG_REGULATOR_GPIO=y +# CONFIG_REGULATOR_ISL6271A is not set +# CONFIG_REGULATOR_LP3971 is not set +# CONFIG_REGULATOR_LP3972 is not set +# CONFIG_REGULATOR_LP872X is not set +# CONFIG_REGULATOR_LP8755 is not set +# CONFIG_REGULATOR_LTC3589 is not set +# CONFIG_REGULATOR_MAX1586 is not set +# CONFIG_REGULATOR_MAX8649 is not set +# CONFIG_REGULATOR_MAX8660 is not set +# CONFIG_REGULATOR_MAX8952 is not set +# CONFIG_REGULATOR_MAX8973 is not set +CONFIG_REGULATOR_MC13XXX_CORE=y +CONFIG_REGULATOR_MC13783=y +CONFIG_REGULATOR_MC13892=y +CONFIG_REGULATOR_PFUZE100=y +# CONFIG_REGULATOR_TPS51632 is not set +# CONFIG_REGULATOR_TPS62360 is not set +# CONFIG_REGULATOR_TPS65023 is not set +# CONFIG_REGULATOR_TPS6507X is not set +# CONFIG_REGULATOR_TPS6524X is not set +CONFIG_MEDIA_SUPPORT=y + +# +# Multimedia core support +# +CONFIG_MEDIA_CAMERA_SUPPORT=y +# CONFIG_MEDIA_ANALOG_TV_SUPPORT is not set +# CONFIG_MEDIA_DIGITAL_TV_SUPPORT is not set +# CONFIG_MEDIA_RADIO_SUPPORT is not set +CONFIG_MEDIA_RC_SUPPORT=y +# CONFIG_MEDIA_CONTROLLER is not set +CONFIG_VIDEO_DEV=y +CONFIG_VIDEO_V4L2=y +# CONFIG_VIDEO_ADV_DEBUG is not set +# CONFIG_VIDEO_FIXED_MINOR_RANGES is not set +CONFIG_V4L2_MEM2MEM_DEV=y +CONFIG_VIDEOBUF_GEN=y +CONFIG_VIDEOBUF2_CORE=y +CONFIG_VIDEOBUF2_MEMOPS=y +CONFIG_VIDEOBUF2_DMA_CONTIG=y +# CONFIG_TTPCI_EEPROM is not set + +# +# Media drivers +# +CONFIG_RC_CORE=y +CONFIG_RC_MAP=y +CONFIG_RC_DECODERS=y +# CONFIG_LIRC is not set +CONFIG_IR_NEC_DECODER=y +CONFIG_IR_RC5_DECODER=y +CONFIG_IR_RC6_DECODER=y +CONFIG_IR_JVC_DECODER=y +CONFIG_IR_SONY_DECODER=y +CONFIG_IR_RC5_SZ_DECODER=y +CONFIG_IR_SANYO_DECODER=y +CONFIG_IR_SHARP_DECODER=y +CONFIG_IR_MCE_KBD_DECODER=y +CONFIG_RC_DEVICES=y +# CONFIG_RC_ATI_REMOTE is not set +# CONFIG_IR_IMON is not set +# CONFIG_IR_MCEUSB is not set +# CONFIG_IR_REDRAT3 is not set +# CONFIG_IR_STREAMZAP is not set +# CONFIG_IR_IGUANA is not set +# CONFIG_IR_TTUSBIR is not set +# CONFIG_IR_IMG is not set +# CONFIG_RC_LOOPBACK is not set +CONFIG_IR_GPIO_CIR=y +# CONFIG_MEDIA_USB_SUPPORT is not set +# CONFIG_MEDIA_PCI_SUPPORT is not set +CONFIG_V4L_PLATFORM_DRIVERS=y +# CONFIG_VIDEO_CAFE_CCIC is not set +CONFIG_SOC_CAMERA=y +# CONFIG_SOC_CAMERA_PLATFORM is not set +CONFIG_VIDEO_MX3=y +# CONFIG_VIDEO_RCAR_VIN is not set +# CONFIG_VIDEO_SH_MOBILE_CSI2 is not set +# CONFIG_VIDEO_SH_MOBILE_CEU is not set +CONFIG_V4L_MEM2MEM_DRIVERS=y +CONFIG_VIDEO_CODA=y +# CONFIG_VIDEO_MEM2MEM_DEINTERLACE is not set +# CONFIG_VIDEO_SH_VEU is not set +# CONFIG_V4L_TEST_DRIVERS is not set + +# +# Supported MMC/SDIO adapters +# +# CONFIG_CYPRESS_FIRMWARE is not set + +# +# Media ancillary drivers (tuners, sensors, i2c, frontends) +# +CONFIG_MEDIA_SUBDRV_AUTOSELECT=y +CONFIG_VIDEO_IR_I2C=y + +# +# Audio decoders, processors and mixers +# + +# +# RDS decoders +# + +# +# Video decoders +# + +# +# Video and audio decoders +# + +# +# Video encoders +# + +# +# Camera sensor devices +# + +# +# Flash devices +# + +# +# Video improvement chips +# + +# +# Audio/Video compression chips +# + +# +# Miscellaneous helper chips +# + +# +# Sensors used on soc_camera driver +# + +# +# soc_camera sensor drivers +# +# CONFIG_SOC_CAMERA_IMX074 is not set +# CONFIG_SOC_CAMERA_MT9M001 is not set +# CONFIG_SOC_CAMERA_MT9M111 is not set +# CONFIG_SOC_CAMERA_MT9T031 is not set +# CONFIG_SOC_CAMERA_MT9T112 is not set +# CONFIG_SOC_CAMERA_MT9V022 is not set +CONFIG_SOC_CAMERA_OV2640=y +# CONFIG_SOC_CAMERA_OV5642 is not set +# CONFIG_SOC_CAMERA_OV6650 is not set +# CONFIG_SOC_CAMERA_OV772X is not set +# CONFIG_SOC_CAMERA_OV9640 is not set +# CONFIG_SOC_CAMERA_OV9740 is not set +# CONFIG_SOC_CAMERA_RJ54N1 is not set +# CONFIG_SOC_CAMERA_TW9910 is not set + +# +# Tools to develop new frontends +# +# CONFIG_DVB_DUMMY_FE is not set + +# +# Graphics support +# +CONFIG_VGA_ARB=y +CONFIG_VGA_ARB_MAX_GPUS=16 +CONFIG_IMX_IPUV3_CORE=y + +# +# Direct Rendering Manager +# +CONFIG_DRM=y +CONFIG_DRM_KMS_HELPER=y +CONFIG_DRM_KMS_FB_HELPER=y +# CONFIG_DRM_LOAD_EDID_FIRMWARE is not set +CONFIG_DRM_GEM_CMA_HELPER=y +CONFIG_DRM_KMS_CMA_HELPER=y + +# +# I2C encoder or helper chips +# +# CONFIG_DRM_I2C_CH7006 is not set +# CONFIG_DRM_I2C_SIL164 is not set +# CONFIG_DRM_I2C_NXP_TDA998X is not set +# CONFIG_DRM_PTN3460 is not set +# CONFIG_DRM_TDFX is not set +# CONFIG_DRM_R128 is not set +# CONFIG_DRM_RADEON is not set +# CONFIG_DRM_NOUVEAU is not set +# CONFIG_DRM_MGA is not set +# CONFIG_DRM_VIA is not set +# CONFIG_DRM_SAVAGE is not set +# CONFIG_DRM_EXYNOS is not set +# CONFIG_DRM_VMWGFX is not set +# CONFIG_DRM_UDL is not set +# CONFIG_DRM_AST is not set +# CONFIG_DRM_MGAG200 is not set +# CONFIG_DRM_CIRRUS_QEMU is not set +# CONFIG_DRM_ARMADA is not set +# CONFIG_DRM_TILCDC is not set +# CONFIG_DRM_QXL is not set +# CONFIG_DRM_BOCHS is not set +CONFIG_DRM_PANEL=y + +# +# Display Panels +# +CONFIG_DRM_PANEL_SIMPLE=y +# CONFIG_DRM_PANEL_LD9040 is not set +# CONFIG_DRM_PANEL_S6E8AA0 is not set + +# +# Frame buffer Devices +# +CONFIG_FB=y +# CONFIG_FIRMWARE_EDID is not set +# CONFIG_FB_DDC is not set +# CONFIG_FB_BOOT_VESA_SUPPORT is not set +CONFIG_FB_CFB_FILLRECT=y +CONFIG_FB_CFB_COPYAREA=y +CONFIG_FB_CFB_IMAGEBLIT=y +# CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set +CONFIG_FB_SYS_FILLRECT=y +CONFIG_FB_SYS_COPYAREA=y +CONFIG_FB_SYS_IMAGEBLIT=y +# CONFIG_FB_FOREIGN_ENDIAN is not set +# CONFIG_FB_SYS_FOPS is not set +# CONFIG_FB_SVGALIB is not set +# CONFIG_FB_MACMODES is not set +# CONFIG_FB_BACKLIGHT is not set +# CONFIG_FB_MODE_HELPERS is not set +# CONFIG_FB_TILEBLITTING is not set + +# +# Frame buffer hardware drivers +# +# CONFIG_FB_CIRRUS is not set +# CONFIG_FB_PM2 is not set +# CONFIG_FB_IMX is not set +# CONFIG_FB_CYBER2000 is not set +# CONFIG_FB_ASILIANT is not set +# CONFIG_FB_IMSTT is not set +# CONFIG_FB_UVESA is not set +# CONFIG_FB_OPENCORES is not set +# CONFIG_FB_S1D13XXX is not set +# CONFIG_FB_NVIDIA is not set +# CONFIG_FB_RIVA is not set +# CONFIG_FB_I740 is not set +# CONFIG_FB_MATROX is not set +# CONFIG_FB_RADEON is not set +# CONFIG_FB_ATY128 is not set +# CONFIG_FB_ATY is not set +# CONFIG_FB_S3 is not set +# CONFIG_FB_SAVAGE is not set +# CONFIG_FB_SIS is not set +# CONFIG_FB_NEOMAGIC is not set +# CONFIG_FB_KYRO is not set +# CONFIG_FB_3DFX is not set +# CONFIG_FB_VOODOO1 is not set +# CONFIG_FB_VT8623 is not set +# CONFIG_FB_TRIDENT is not set +# CONFIG_FB_ARK is not set +# CONFIG_FB_PM3 is not set +# CONFIG_FB_CARMINE is not set +# CONFIG_FB_SMSCUFX is not set +# CONFIG_FB_UDL is not set +# CONFIG_FB_VIRTUAL is not set +# CONFIG_FB_METRONOME is not set +# CONFIG_FB_MB862XX is not set +CONFIG_FB_MX3=y +# CONFIG_FB_BROADSHEET is not set +# CONFIG_FB_AUO_K190X is not set +# CONFIG_FB_SIMPLE is not set +# CONFIG_FB_SSD1307 is not set +CONFIG_BACKLIGHT_LCD_SUPPORT=y +CONFIG_LCD_CLASS_DEVICE=y +CONFIG_LCD_L4F00242T03=y +# CONFIG_LCD_LMS283GF05 is not set +# CONFIG_LCD_LTV350QV is not set +# CONFIG_LCD_ILI922X is not set +# CONFIG_LCD_ILI9320 is not set +# CONFIG_LCD_TDO24M is not set +# CONFIG_LCD_VGG2432A4 is not set +CONFIG_LCD_PLATFORM=y +# CONFIG_LCD_S6E63M0 is not set +# CONFIG_LCD_LD9040 is not set +# CONFIG_LCD_AMS369FG06 is not set +# CONFIG_LCD_LMS501KF03 is not set +# CONFIG_LCD_HX8357 is not set +CONFIG_BACKLIGHT_CLASS_DEVICE=y +CONFIG_BACKLIGHT_GENERIC=y +CONFIG_BACKLIGHT_PWM=y +# CONFIG_BACKLIGHT_DA9052 is not set +# CONFIG_BACKLIGHT_ADP8860 is not set +# CONFIG_BACKLIGHT_ADP8870 is not set +# CONFIG_BACKLIGHT_LM3630A is not set +# CONFIG_BACKLIGHT_LM3639 is not set +# CONFIG_BACKLIGHT_LP855X is not set +CONFIG_BACKLIGHT_GPIO=y +# CONFIG_BACKLIGHT_LV5207LP is not set +# CONFIG_BACKLIGHT_BD6107 is not set +# CONFIG_VGASTATE is not set +CONFIG_VIDEOMODE_HELPERS=y +CONFIG_HDMI=y + +# +# Console display driver support +# +CONFIG_DUMMY_CONSOLE=y +CONFIG_FRAMEBUFFER_CONSOLE=y +CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY=y +# CONFIG_FRAMEBUFFER_CONSOLE_ROTATION is not set +CONFIG_LOGO=y +CONFIG_LOGO_LINUX_MONO=y +CONFIG_LOGO_LINUX_VGA16=y +CONFIG_LOGO_LINUX_CLUT224=y +CONFIG_SOUND=y +# CONFIG_SOUND_OSS_CORE is not set +CONFIG_SND=y +CONFIG_SND_TIMER=y +CONFIG_SND_PCM=y +CONFIG_SND_DMAENGINE_PCM=y +CONFIG_SND_COMPRESS_OFFLOAD=y +CONFIG_SND_JACK=y +# CONFIG_SND_SEQUENCER is not set +# CONFIG_SND_MIXER_OSS is not set +# CONFIG_SND_PCM_OSS is not set +# CONFIG_SND_HRTIMER is not set +# CONFIG_SND_DYNAMIC_MINORS is not set +CONFIG_SND_SUPPORT_OLD_API=y +CONFIG_SND_VERBOSE_PROCFS=y +# CONFIG_SND_VERBOSE_PRINTK is not set +# CONFIG_SND_DEBUG is not set +# CONFIG_SND_RAWMIDI_SEQ is not set +# CONFIG_SND_OPL3_LIB_SEQ is not set +# CONFIG_SND_OPL4_LIB_SEQ is not set +# CONFIG_SND_SBAWE_SEQ is not set +# CONFIG_SND_EMU10K1_SEQ is not set +CONFIG_SND_DRIVERS=y +# CONFIG_SND_DUMMY is not set +# CONFIG_SND_ALOOP is not set +# CONFIG_SND_MTPAV is not set +# CONFIG_SND_SERIAL_U16550 is not set +# CONFIG_SND_MPU401 is not set +CONFIG_SND_PCI=y +# CONFIG_SND_AD1889 is not set +# CONFIG_SND_ALS300 is not set +# CONFIG_SND_ALI5451 is not set +# CONFIG_SND_ATIIXP is not set +# CONFIG_SND_ATIIXP_MODEM is not set +# CONFIG_SND_AU8810 is not set +# CONFIG_SND_AU8820 is not set +# CONFIG_SND_AU8830 is not set +# CONFIG_SND_AW2 is not set +# CONFIG_SND_AZT3328 is not set +# CONFIG_SND_BT87X is not set +# CONFIG_SND_CA0106 is not set +# CONFIG_SND_CMIPCI is not set +# CONFIG_SND_OXYGEN is not set +# CONFIG_SND_CS4281 is not set +# CONFIG_SND_CS46XX is not set +# CONFIG_SND_CTXFI is not set +# CONFIG_SND_DARLA20 is not set +# CONFIG_SND_GINA20 is not set +# CONFIG_SND_LAYLA20 is not set +# CONFIG_SND_DARLA24 is not set +# CONFIG_SND_GINA24 is not set +# CONFIG_SND_LAYLA24 is not set +# CONFIG_SND_MONA is not set +# CONFIG_SND_MIA is not set +# CONFIG_SND_ECHO3G is not set +# CONFIG_SND_INDIGO is not set +# CONFIG_SND_INDIGOIO is not set +# CONFIG_SND_INDIGODJ is not set +# CONFIG_SND_INDIGOIOX is not set +# CONFIG_SND_INDIGODJX is not set +# CONFIG_SND_EMU10K1 is not set +# CONFIG_SND_EMU10K1X is not set +# CONFIG_SND_ENS1370 is not set +# CONFIG_SND_ENS1371 is not set +# CONFIG_SND_ES1938 is not set +# CONFIG_SND_ES1968 is not set +# CONFIG_SND_FM801 is not set +# CONFIG_SND_HDSP is not set +# CONFIG_SND_HDSPM is not set +# CONFIG_SND_ICE1712 is not set +# CONFIG_SND_ICE1724 is not set +# CONFIG_SND_INTEL8X0 is not set +# CONFIG_SND_INTEL8X0M is not set +# CONFIG_SND_KORG1212 is not set +# CONFIG_SND_LOLA is not set +# CONFIG_SND_LX6464ES is not set +# CONFIG_SND_MAESTRO3 is not set +# CONFIG_SND_MIXART is not set +# CONFIG_SND_NM256 is not set +# CONFIG_SND_PCXHR is not set +# CONFIG_SND_RIPTIDE is not set +# CONFIG_SND_RME32 is not set +# CONFIG_SND_RME96 is not set +# CONFIG_SND_RME9652 is not set +# CONFIG_SND_SONICVIBES is not set +# CONFIG_SND_TRIDENT is not set +# CONFIG_SND_VIA82XX is not set +# CONFIG_SND_VIA82XX_MODEM is not set +# CONFIG_SND_VIRTUOSO is not set +# CONFIG_SND_VX222 is not set +# CONFIG_SND_YMFPCI is not set + +# +# HD-Audio +# +# CONFIG_SND_HDA_INTEL is not set +CONFIG_SND_ARM=y +CONFIG_SND_SPI=y +CONFIG_SND_USB=y +# CONFIG_SND_USB_AUDIO is not set +# CONFIG_SND_USB_UA101 is not set +# CONFIG_SND_USB_CAIAQ is not set +# CONFIG_SND_USB_6FIRE is not set +# CONFIG_SND_USB_HIFACE is not set +# CONFIG_SND_BCD2000 is not set +CONFIG_SND_SOC=y +CONFIG_SND_SOC_AC97_BUS=y +CONFIG_SND_SOC_GENERIC_DMAENGINE_PCM=y +# CONFIG_SND_ATMEL_SOC is not set +# CONFIG_SND_DESIGNWARE_I2S is not set + +# +# SoC Audio for Freescale CPUs +# + +# +# Common SoC Audio options for Freescale CPUs: +# +# CONFIG_SND_SOC_FSL_SAI is not set +CONFIG_SND_SOC_FSL_SSI=y +CONFIG_SND_SOC_FSL_SPDIF=y +# CONFIG_SND_SOC_FSL_ESAI is not set +CONFIG_SND_SOC_FSL_UTILS=y +CONFIG_SND_SOC_IMX_PCM_DMA=y +CONFIG_SND_SOC_IMX_AUDMUX=y +CONFIG_SND_IMX_SOC=y +CONFIG_SND_SOC_IMX_SSI=y +CONFIG_SND_SOC_IMX_PCM_FIQ=y + +# +# SoC Audio support for Freescale i.MX boards: +# +CONFIG_SND_SOC_PHYCORE_AC97=y +CONFIG_SND_SOC_EUKREA_TLV320=y +CONFIG_SND_SOC_IMX_WM8962=y +CONFIG_SND_SOC_IMX_SGTL5000=y +CONFIG_SND_SOC_IMX_SPDIF=y +CONFIG_SND_SOC_IMX_MC13783=y +CONFIG_SND_SOC_I2C_AND_SPI=y + +# +# CODEC drivers +# +# CONFIG_SND_SOC_ADAU1701 is not set +# CONFIG_SND_SOC_AK4104 is not set +# CONFIG_SND_SOC_AK4554 is not set +# CONFIG_SND_SOC_AK4642 is not set +# CONFIG_SND_SOC_AK5386 is not set +# CONFIG_SND_SOC_ALC5623 is not set +# CONFIG_SND_SOC_CS42L52 is not set +# CONFIG_SND_SOC_CS42L56 is not set +# CONFIG_SND_SOC_CS42L73 is not set +# CONFIG_SND_SOC_CS4270 is not set +# CONFIG_SND_SOC_CS4271 is not set +# CONFIG_SND_SOC_CS42XX8_I2C is not set +# CONFIG_SND_SOC_HDMI_CODEC is not set +# CONFIG_SND_SOC_PCM1681 is not set +# CONFIG_SND_SOC_PCM1792A is not set +# CONFIG_SND_SOC_PCM512x_I2C is not set +# CONFIG_SND_SOC_PCM512x_SPI is not set +CONFIG_SND_SOC_SGTL5000=y +# CONFIG_SND_SOC_SIRF_AUDIO_CODEC is not set +# CONFIG_SND_SOC_SPDIF is not set +# CONFIG_SND_SOC_STA350 is not set +# CONFIG_SND_SOC_TAS5086 is not set +CONFIG_SND_SOC_TLV320AIC23=y +CONFIG_SND_SOC_TLV320AIC23_I2C=y +# CONFIG_SND_SOC_TLV320AIC3X is not set +# CONFIG_SND_SOC_WM8510 is not set +# CONFIG_SND_SOC_WM8523 is not set +# CONFIG_SND_SOC_WM8580 is not set +# CONFIG_SND_SOC_WM8711 is not set +# CONFIG_SND_SOC_WM8728 is not set +# CONFIG_SND_SOC_WM8731 is not set +# CONFIG_SND_SOC_WM8737 is not set +# CONFIG_SND_SOC_WM8741 is not set +# CONFIG_SND_SOC_WM8750 is not set +# CONFIG_SND_SOC_WM8753 is not set +# CONFIG_SND_SOC_WM8770 is not set +# CONFIG_SND_SOC_WM8776 is not set +# CONFIG_SND_SOC_WM8804 is not set +# CONFIG_SND_SOC_WM8903 is not set +CONFIG_SND_SOC_WM8962=y +CONFIG_SND_SOC_WM9712=y +CONFIG_SND_SOC_MC13783=y +# CONFIG_SND_SOC_TPA6130A2 is not set +# CONFIG_SND_SIMPLE_CARD is not set +# CONFIG_SOUND_PRIME is not set +CONFIG_AC97_BUS=y + +# +# HID support +# +CONFIG_HID=y +# CONFIG_HIDRAW is not set +# CONFIG_UHID is not set +CONFIG_HID_GENERIC=y + +# +# Special HID drivers +# +# CONFIG_HID_A4TECH is not set +# CONFIG_HID_ACRUX is not set +# CONFIG_HID_APPLE is not set +# CONFIG_HID_APPLEIR is not set +# CONFIG_HID_AUREAL is not set +# CONFIG_HID_BELKIN is not set +# CONFIG_HID_CHERRY is not set +# CONFIG_HID_CHICONY is not set +# CONFIG_HID_PRODIKEYS is not set +# CONFIG_HID_CP2112 is not set +# CONFIG_HID_CYPRESS is not set +# CONFIG_HID_DRAGONRISE is not set +# CONFIG_HID_EMS_FF is not set +# CONFIG_HID_ELECOM is not set +# CONFIG_HID_ELO is not set +# CONFIG_HID_EZKEY is not set +# CONFIG_HID_HOLTEK is not set +# CONFIG_HID_HUION is not set +# CONFIG_HID_KEYTOUCH is not set +# CONFIG_HID_KYE is not set +# CONFIG_HID_UCLOGIC is not set +# CONFIG_HID_WALTOP is not set +# CONFIG_HID_GYRATION is not set +# CONFIG_HID_ICADE is not set +# CONFIG_HID_TWINHAN is not set +# CONFIG_HID_KENSINGTON is not set +# CONFIG_HID_LCPOWER is not set +# CONFIG_HID_LENOVO_TPKBD is not set +# CONFIG_HID_LOGITECH is not set +# CONFIG_HID_MAGICMOUSE is not set +# CONFIG_HID_MICROSOFT is not set +# CONFIG_HID_MONTEREY is not set +# CONFIG_HID_MULTITOUCH is not set +# CONFIG_HID_NTRIG is not set +# CONFIG_HID_ORTEK is not set +# CONFIG_HID_PANTHERLORD is not set +# CONFIG_HID_PETALYNX is not set +# CONFIG_HID_PICOLCD is not set +# CONFIG_HID_PRIMAX is not set +# CONFIG_HID_ROCCAT is not set +# CONFIG_HID_SAITEK is not set +# CONFIG_HID_SAMSUNG is not set +# CONFIG_HID_SONY is not set +# CONFIG_HID_SPEEDLINK is not set +# CONFIG_HID_STEELSERIES is not set +# CONFIG_HID_SUNPLUS is not set +# CONFIG_HID_RMI is not set +# CONFIG_HID_GREENASIA is not set +# CONFIG_HID_SMARTJOYPLUS is not set +# CONFIG_HID_TIVO is not set +# CONFIG_HID_TOPSEED is not set +# CONFIG_HID_THINGM is not set +# CONFIG_HID_THRUSTMASTER is not set +# CONFIG_HID_WACOM is not set +# CONFIG_HID_WIIMOTE is not set +# CONFIG_HID_XINMO is not set +# CONFIG_HID_ZEROPLUS is not set +# CONFIG_HID_ZYDACRON is not set +# CONFIG_HID_SENSOR_HUB is not set + +# +# USB HID support +# +CONFIG_USB_HID=y +# CONFIG_HID_PID is not set +# CONFIG_USB_HIDDEV is not set + +# +# I2C HID support +# +# CONFIG_I2C_HID is not set +CONFIG_USB_OHCI_LITTLE_ENDIAN=y +CONFIG_USB_SUPPORT=y +CONFIG_USB_COMMON=y +CONFIG_USB_ARCH_HAS_HCD=y +CONFIG_USB=y +# CONFIG_USB_ANNOUNCE_NEW_DEVICES is not set + +# +# Miscellaneous USB options +# +CONFIG_USB_DEFAULT_PERSIST=y +# CONFIG_USB_DYNAMIC_MINORS is not set +# CONFIG_USB_OTG is not set +# CONFIG_USB_OTG_WHITELIST is not set +# CONFIG_USB_OTG_BLACKLIST_HUB is not set +# CONFIG_USB_OTG_FSM is not set +# CONFIG_USB_MON is not set +# CONFIG_USB_WUSB_CBAF is not set + +# +# USB Host Controller Drivers +# +# CONFIG_USB_C67X00_HCD is not set +# CONFIG_USB_XHCI_HCD is not set +CONFIG_USB_EHCI_HCD=y +CONFIG_USB_EHCI_ROOT_HUB_TT=y +CONFIG_USB_EHCI_TT_NEWSCHED=y +CONFIG_USB_EHCI_PCI=y +CONFIG_USB_EHCI_MXC=y +# CONFIG_USB_EHCI_HCD_PLATFORM is not set +# CONFIG_USB_OXU210HP_HCD is not set +# CONFIG_USB_ISP116X_HCD is not set +# CONFIG_USB_ISP1760_HCD is not set +# CONFIG_USB_ISP1362_HCD is not set +# CONFIG_USB_FUSBH200_HCD is not set +# CONFIG_USB_FOTG210_HCD is not set +# CONFIG_USB_MAX3421_HCD is not set +# CONFIG_USB_OHCI_HCD is not set +# CONFIG_USB_UHCI_HCD is not set +# CONFIG_USB_SL811_HCD is not set +# CONFIG_USB_R8A66597_HCD is not set +# CONFIG_USB_IMX21_HCD is not set +# CONFIG_USB_HCD_TEST_MODE is not set +# CONFIG_USB_RENESAS_USBHS is not set + +# +# USB Device Class drivers +# +# CONFIG_USB_ACM is not set +# CONFIG_USB_PRINTER is not set +# CONFIG_USB_WDM is not set +# CONFIG_USB_TMC is not set + +# +# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may +# + +# +# also be needed; see USB_STORAGE Help for more info +# +CONFIG_USB_STORAGE=y +# CONFIG_USB_STORAGE_DEBUG is not set +# CONFIG_USB_STORAGE_REALTEK is not set +# CONFIG_USB_STORAGE_DATAFAB is not set +# CONFIG_USB_STORAGE_FREECOM is not set +# CONFIG_USB_STORAGE_ISD200 is not set +# CONFIG_USB_STORAGE_USBAT is not set +# CONFIG_USB_STORAGE_SDDR09 is not set +# CONFIG_USB_STORAGE_SDDR55 is not set +# CONFIG_USB_STORAGE_JUMPSHOT is not set +# CONFIG_USB_STORAGE_ALAUDA is not set +# CONFIG_USB_STORAGE_ONETOUCH is not set +# CONFIG_USB_STORAGE_KARMA is not set +# CONFIG_USB_STORAGE_CYPRESS_ATACB is not set +# CONFIG_USB_STORAGE_ENE_UB6250 is not set +# CONFIG_USB_UAS is not set + +# +# USB Imaging devices +# +# CONFIG_USB_MDC800 is not set +# CONFIG_USB_MICROTEK is not set +# CONFIG_USB_MUSB_HDRC is not set +# CONFIG_USB_DWC3 is not set +# CONFIG_USB_DWC2 is not set +CONFIG_USB_CHIPIDEA=y +CONFIG_USB_CHIPIDEA_UDC=y +CONFIG_USB_CHIPIDEA_HOST=y +# CONFIG_USB_CHIPIDEA_DEBUG is not set + +# +# USB port drivers +# +# CONFIG_USB_SERIAL is not set + +# +# USB Miscellaneous drivers +# +# CONFIG_USB_EMI62 is not set +# CONFIG_USB_EMI26 is not set +# CONFIG_USB_ADUTUX is not set +# CONFIG_USB_SEVSEG is not set +# CONFIG_USB_RIO500 is not set +# CONFIG_USB_LEGOTOWER is not set +# CONFIG_USB_LCD is not set +# CONFIG_USB_LED is not set +# CONFIG_USB_CYPRESS_CY7C63 is not set +# CONFIG_USB_CYTHERM is not set +# CONFIG_USB_IDMOUSE is not set +# CONFIG_USB_FTDI_ELAN is not set +# CONFIG_USB_APPLEDISPLAY is not set +# CONFIG_USB_SISUSBVGA is not set +# CONFIG_USB_LD is not set +# CONFIG_USB_TRANCEVIBRATOR is not set +# CONFIG_USB_IOWARRIOR is not set +# CONFIG_USB_TEST is not set +# CONFIG_USB_EHSET_TEST_FIXTURE is not set +# CONFIG_USB_ISIGHTFW is not set +# CONFIG_USB_YUREX is not set +# CONFIG_USB_EZUSB_FX2 is not set +# CONFIG_USB_HSIC_USB3503 is not set + +# +# USB Physical Layer drivers +# +CONFIG_USB_PHY=y +CONFIG_NOP_USB_XCEIV=y +# CONFIG_AM335X_PHY_USB is not set +# CONFIG_SAMSUNG_USB2PHY is not set +# CONFIG_SAMSUNG_USB3PHY is not set +# CONFIG_USB_GPIO_VBUS is not set +# CONFIG_USB_ISP1301 is not set +CONFIG_USB_MXS_PHY=y +# CONFIG_USB_ULPI is not set +CONFIG_USB_GADGET=y +# CONFIG_USB_GADGET_DEBUG is not set +# CONFIG_USB_GADGET_DEBUG_FILES is not set +# CONFIG_USB_GADGET_DEBUG_FS is not set +CONFIG_USB_GADGET_VBUS_DRAW=2 +CONFIG_USB_GADGET_STORAGE_NUM_BUFFERS=2 + +# +# USB Peripheral Controller +# +# CONFIG_USB_FSL_USB2 is not set +# CONFIG_USB_FUSB300 is not set +# CONFIG_USB_FOTG210_UDC is not set +# CONFIG_USB_GR_UDC is not set +# CONFIG_USB_R8A66597 is not set +# CONFIG_USB_PXA27X is not set +# CONFIG_USB_MV_UDC is not set +# CONFIG_USB_MV_U3D is not set +# CONFIG_USB_M66592 is not set +# CONFIG_USB_AMD5536UDC is not set +# CONFIG_USB_NET2272 is not set +# CONFIG_USB_NET2280 is not set +# CONFIG_USB_GOKU is not set +# CONFIG_USB_EG20T is not set +# CONFIG_USB_DUMMY_HCD is not set +CONFIG_USB_LIBCOMPOSITE=m +CONFIG_USB_U_ETHER=m +CONFIG_USB_F_ECM=m +CONFIG_USB_F_SUBSET=m +CONFIG_USB_F_RNDIS=m +CONFIG_USB_F_MASS_STORAGE=m +# CONFIG_USB_CONFIGFS is not set +# CONFIG_USB_ZERO is not set +# CONFIG_USB_AUDIO is not set +CONFIG_USB_ETH=m +CONFIG_USB_ETH_RNDIS=y +# CONFIG_USB_ETH_EEM is not set +# CONFIG_USB_G_NCM is not set +# CONFIG_USB_GADGETFS is not set +# CONFIG_USB_FUNCTIONFS is not set +CONFIG_USB_MASS_STORAGE=m +# CONFIG_USB_G_SERIAL is not set +# CONFIG_USB_MIDI_GADGET is not set +# CONFIG_USB_G_PRINTER is not set +# CONFIG_USB_CDC_COMPOSITE is not set +# CONFIG_USB_G_ACM_MS is not set +# CONFIG_USB_G_MULTI is not set +# CONFIG_USB_G_HID is not set +# CONFIG_USB_G_DBGP is not set +# CONFIG_USB_G_WEBCAM is not set +# CONFIG_UWB is not set +CONFIG_MMC=y +# CONFIG_MMC_DEBUG is not set +# CONFIG_MMC_CLKGATE is not set + +# +# MMC/SD/SDIO Card Drivers +# +CONFIG_MMC_BLOCK=y +CONFIG_MMC_BLOCK_MINORS=8 +CONFIG_MMC_BLOCK_BOUNCE=y +# CONFIG_SDIO_UART is not set +# CONFIG_MMC_TEST is not set + +# +# MMC/SD/SDIO Host Controller Drivers +# +CONFIG_MMC_SDHCI=y +CONFIG_MMC_SDHCI_IO_ACCESSORS=y +# CONFIG_MMC_SDHCI_PCI is not set +CONFIG_MMC_SDHCI_PLTFM=y +# CONFIG_MMC_SDHCI_OF_ARASAN is not set +CONFIG_MMC_SDHCI_ESDHC_IMX=y +# CONFIG_MMC_SDHCI_PXAV3 is not set +# CONFIG_MMC_SDHCI_PXAV2 is not set +# CONFIG_MMC_MXC is not set +# CONFIG_MMC_TIFM_SD is not set +# CONFIG_MMC_CB710 is not set +# CONFIG_MMC_VIA_SDMMC is not set +# CONFIG_MMC_DW is not set +# CONFIG_MMC_VUB300 is not set +# CONFIG_MMC_USHC is not set +# CONFIG_MMC_USDHI6ROL0 is not set +# CONFIG_MEMSTICK is not set +CONFIG_LEDS_GPIO_REGISTER=y +CONFIG_NEW_LEDS=y +CONFIG_LEDS_CLASS=y + +# +# LED drivers +# +# CONFIG_LEDS_LM3530 is not set +# CONFIG_LEDS_LM3642 is not set +# CONFIG_LEDS_PCA9532 is not set +CONFIG_LEDS_GPIO=y +# CONFIG_LEDS_LP3944 is not set +# CONFIG_LEDS_LP5521 is not set +# CONFIG_LEDS_LP5523 is not set +# CONFIG_LEDS_LP5562 is not set +# CONFIG_LEDS_LP8501 is not set +# CONFIG_LEDS_PCA955X is not set +# CONFIG_LEDS_PCA963X is not set +# CONFIG_LEDS_DA9052 is not set +# CONFIG_LEDS_DAC124S085 is not set +# CONFIG_LEDS_PWM is not set +# CONFIG_LEDS_REGULATOR is not set +# CONFIG_LEDS_BD2802 is not set +# CONFIG_LEDS_LT3593 is not set +# CONFIG_LEDS_MC13783 is not set +# CONFIG_LEDS_TCA6507 is not set +# CONFIG_LEDS_LM355x is not set + +# +# LED driver for blink(1) USB RGB LED is under Special HID drivers (HID_THINGM) +# +# CONFIG_LEDS_BLINKM is not set + +# +# LED Triggers +# +CONFIG_LEDS_TRIGGERS=y +CONFIG_LEDS_TRIGGER_TIMER=y +CONFIG_LEDS_TRIGGER_ONESHOT=y +CONFIG_LEDS_TRIGGER_HEARTBEAT=y +CONFIG_LEDS_TRIGGER_BACKLIGHT=y +# CONFIG_LEDS_TRIGGER_CPU is not set +CONFIG_LEDS_TRIGGER_GPIO=y +# CONFIG_LEDS_TRIGGER_DEFAULT_ON is not set + +# +# iptables trigger is under Netfilter config (LED target) +# +# CONFIG_LEDS_TRIGGER_TRANSIENT is not set +# CONFIG_LEDS_TRIGGER_CAMERA is not set +# CONFIG_ACCESSIBILITY is not set +# CONFIG_INFINIBAND is not set +# CONFIG_EDAC is not set +CONFIG_RTC_LIB=y +CONFIG_RTC_CLASS=y +CONFIG_RTC_HCTOSYS=y +CONFIG_RTC_SYSTOHC=y +CONFIG_RTC_HCTOSYS_DEVICE="rtc0" +# CONFIG_RTC_DEBUG is not set + +# +# RTC interfaces +# +CONFIG_RTC_INTF_SYSFS=y +CONFIG_RTC_INTF_PROC=y +CONFIG_RTC_INTF_DEV=y +CONFIG_RTC_INTF_DEV_UIE_EMUL=y +# CONFIG_RTC_DRV_TEST is not set + +# +# I2C RTC drivers +# +# CONFIG_RTC_DRV_DS1307 is not set +# CONFIG_RTC_DRV_DS1374 is not set +# CONFIG_RTC_DRV_DS1672 is not set +# CONFIG_RTC_DRV_DS3232 is not set +# CONFIG_RTC_DRV_HYM8563 is not set +# CONFIG_RTC_DRV_MAX6900 is not set +# CONFIG_RTC_DRV_RS5C372 is not set +# CONFIG_RTC_DRV_ISL1208 is not set +# CONFIG_RTC_DRV_ISL12022 is not set +# CONFIG_RTC_DRV_ISL12057 is not set +# CONFIG_RTC_DRV_X1205 is not set +# CONFIG_RTC_DRV_PCF2127 is not set +# CONFIG_RTC_DRV_PCF8523 is not set +CONFIG_RTC_DRV_PCF8563=y +# CONFIG_RTC_DRV_PCF8583 is not set +# CONFIG_RTC_DRV_M41T80 is not set +# CONFIG_RTC_DRV_BQ32K is not set +# CONFIG_RTC_DRV_S35390A is not set +# CONFIG_RTC_DRV_FM3130 is not set +# CONFIG_RTC_DRV_RX8581 is not set +# CONFIG_RTC_DRV_RX8025 is not set +# CONFIG_RTC_DRV_EM3027 is not set +# CONFIG_RTC_DRV_RV3029C2 is not set + +# +# SPI RTC drivers +# +# CONFIG_RTC_DRV_M41T93 is not set +# CONFIG_RTC_DRV_M41T94 is not set +# CONFIG_RTC_DRV_DS1305 is not set +# CONFIG_RTC_DRV_DS1343 is not set +# CONFIG_RTC_DRV_DS1347 is not set +# CONFIG_RTC_DRV_DS1390 is not set +# CONFIG_RTC_DRV_MAX6902 is not set +# CONFIG_RTC_DRV_R9701 is not set +# CONFIG_RTC_DRV_RS5C348 is not set +# CONFIG_RTC_DRV_DS3234 is not set +# CONFIG_RTC_DRV_PCF2123 is not set +# CONFIG_RTC_DRV_RX4581 is not set +# CONFIG_RTC_DRV_MCP795 is not set + +# +# Platform RTC drivers +# +# CONFIG_RTC_DRV_CMOS is not set +# CONFIG_RTC_DRV_DS1286 is not set +# CONFIG_RTC_DRV_DS1511 is not set +# CONFIG_RTC_DRV_DS1553 is not set +# CONFIG_RTC_DRV_DS1742 is not set +# CONFIG_RTC_DRV_DA9052 is not set +# CONFIG_RTC_DRV_STK17TA8 is not set +# CONFIG_RTC_DRV_M48T86 is not set +# CONFIG_RTC_DRV_M48T35 is not set +# CONFIG_RTC_DRV_M48T59 is not set +# CONFIG_RTC_DRV_MSM6242 is not set +# CONFIG_RTC_DRV_BQ4802 is not set +# CONFIG_RTC_DRV_RP5C01 is not set +# CONFIG_RTC_DRV_V3020 is not set +# CONFIG_RTC_DRV_DS2404 is not set + +# +# on-CPU RTC drivers +# +# CONFIG_RTC_DRV_IMXDI is not set +CONFIG_RTC_DRV_MC13XXX=y +CONFIG_RTC_DRV_MXC=y +CONFIG_RTC_DRV_SNVS=y +# CONFIG_RTC_DRV_MOXART is not set +# CONFIG_RTC_DRV_XGENE is not set + +# +# HID Sensor RTC drivers +# +# CONFIG_RTC_DRV_HID_SENSOR_TIME is not set +CONFIG_DMADEVICES=y +# CONFIG_DMADEVICES_DEBUG is not set + +# +# DMA Devices +# +# CONFIG_DW_DMAC_CORE is not set +# CONFIG_DW_DMAC is not set +# CONFIG_DW_DMAC_PCI is not set +CONFIG_MX3_IPU=y +CONFIG_MX3_IPU_IRQS=4 +CONFIG_IMX_SDMA=y +# CONFIG_IMX_DMA is not set +CONFIG_MXS_DMA=y +# CONFIG_FSL_EDMA is not set +CONFIG_DMA_ENGINE=y +CONFIG_DMA_OF=y + +# +# DMA Clients +# +# CONFIG_ASYNC_TX_DMA is not set +# CONFIG_DMATEST is not set +# CONFIG_AUXDISPLAY is not set +# CONFIG_UIO is not set +# CONFIG_VIRT_DRIVERS is not set + +# +# Virtio drivers +# +# CONFIG_VIRTIO_PCI is not set +# CONFIG_VIRTIO_MMIO is not set + +# +# Microsoft Hyper-V guest support +# +CONFIG_STAGING=y +# CONFIG_ET131X is not set +# CONFIG_USBIP_CORE is not set +# CONFIG_W35UND is not set +# CONFIG_PRISM2_USB is not set +# CONFIG_COMEDI is not set +# CONFIG_RTL8192U is not set +# CONFIG_RTLLIB is not set +# CONFIG_R8712U is not set +# CONFIG_R8188EU is not set +# CONFIG_R8192EE is not set +# CONFIG_R8723AU is not set +# CONFIG_R8821AE is not set +# CONFIG_RTS5208 is not set +# CONFIG_TRANZPORT is not set +# CONFIG_IDE_PHISON is not set +# CONFIG_LINE6_USB is not set +# CONFIG_VT6655 is not set +# CONFIG_VT6656 is not set +# CONFIG_DX_SEP is not set +# CONFIG_CRYSTALHD is not set +# CONFIG_FB_XGI is not set +# CONFIG_USB_ENESTORAGE is not set +# CONFIG_BCM_WIMAX is not set +# CONFIG_FT1000 is not set + +# +# Speakup console speech +# +# CONFIG_SPEAKUP is not set +# CONFIG_TOUCHSCREEN_CLEARPAD_TM1217 is not set +# CONFIG_TOUCHSCREEN_SYNAPTICS_I2C_RMI4 is not set +# CONFIG_STAGING_MEDIA is not set + +# +# Android +# +# CONFIG_ANDROID is not set +# CONFIG_USB_WPAN_HCD is not set +# CONFIG_WIMAX_GDM72XX is not set +# CONFIG_LTE_GDM724X is not set +CONFIG_NET_VENDOR_SILICOM=y +# CONFIG_SBYPASS is not set +# CONFIG_BPCTL is not set +# CONFIG_CED1401 is not set +CONFIG_DRM_IMX=y +CONFIG_DRM_IMX_FB_HELPER=y +CONFIG_DRM_IMX_PARALLEL_DISPLAY=y +CONFIG_DRM_IMX_TVE=y +CONFIG_DRM_IMX_LDB=y +CONFIG_DRM_IMX_IPUV3=y +CONFIG_DRM_IMX_HDMI=y +# CONFIG_DGRP is not set +# CONFIG_MTD_SPINAND_MT29F is not set +# CONFIG_LUSTRE_FS is not set +# CONFIG_XILLYBUS is not set +# CONFIG_DGNC is not set +# CONFIG_DGAP is not set +# CONFIG_GS_FPGABOOT is not set + +# +# SOC (System On Chip) specific Drivers +# +CONFIG_CLKDEV_LOOKUP=y +CONFIG_HAVE_CLK_PREPARE=y +CONFIG_COMMON_CLK=y + +# +# Common Clock Framework +# +# CONFIG_COMMON_CLK_SI5351 is not set +# CONFIG_COMMON_CLK_SI570 is not set +# CONFIG_COMMON_CLK_QCOM is not set + +# +# Hardware Spinlock drivers +# +CONFIG_CLKSRC_OF=y +CONFIG_CLKSRC_MMIO=y +CONFIG_VF_PIT_TIMER=y +# CONFIG_SH_TIMER_CMT is not set +# CONFIG_SH_TIMER_MTU2 is not set +# CONFIG_SH_TIMER_TMU is not set +# CONFIG_EM_TIMER_STI is not set +# CONFIG_CLKSRC_VERSATILE is not set +# CONFIG_MAILBOX is not set +# CONFIG_IOMMU_SUPPORT is not set + +# +# Remoteproc drivers +# +# CONFIG_STE_MODEM_RPROC is not set + +# +# Rpmsg drivers +# +# CONFIG_PM_DEVFREQ is not set +# CONFIG_EXTCON is not set +# CONFIG_MEMORY is not set +# CONFIG_IIO is not set +# CONFIG_VME_BUS is not set +CONFIG_PWM=y +CONFIG_PWM_SYSFS=y +# CONFIG_PWM_FSL_FTM is not set +CONFIG_PWM_IMX=y +# CONFIG_PWM_PCA9685 is not set +CONFIG_IRQCHIP=y +CONFIG_ARM_GIC=y +# CONFIG_IPACK_BUS is not set +CONFIG_ARCH_HAS_RESET_CONTROLLER=y +CONFIG_RESET_CONTROLLER=y +# CONFIG_FMC is not set + +# +# PHY Subsystem +# +# CONFIG_GENERIC_PHY is not set +# CONFIG_BCM_KONA_USB2_PHY is not set +# CONFIG_PHY_SAMSUNG_USB2 is not set +# CONFIG_POWERCAP is not set +# CONFIG_MCB is not set + +# +# File systems +# +CONFIG_DCACHE_WORD_ACCESS=y +CONFIG_EXT2_FS=y +CONFIG_EXT2_FS_XATTR=y +CONFIG_EXT2_FS_POSIX_ACL=y +CONFIG_EXT2_FS_SECURITY=y +# CONFIG_EXT2_FS_XIP is not set +CONFIG_EXT3_FS=y +CONFIG_EXT3_DEFAULTS_TO_ORDERED=y +CONFIG_EXT3_FS_XATTR=y +CONFIG_EXT3_FS_POSIX_ACL=y +CONFIG_EXT3_FS_SECURITY=y +CONFIG_EXT4_FS=y +CONFIG_EXT4_FS_POSIX_ACL=y +CONFIG_EXT4_FS_SECURITY=y +# CONFIG_EXT4_DEBUG is not set +CONFIG_JBD=y +# CONFIG_JBD_DEBUG is not set +CONFIG_JBD2=y +# CONFIG_JBD2_DEBUG is not set +CONFIG_FS_MBCACHE=y +# CONFIG_REISERFS_FS is not set +# CONFIG_JFS_FS is not set +# CONFIG_XFS_FS is not set +# CONFIG_GFS2_FS is not set +# CONFIG_OCFS2_FS is not set +# CONFIG_BTRFS_FS is not set +# CONFIG_NILFS2_FS is not set +CONFIG_FS_POSIX_ACL=y +CONFIG_FILE_LOCKING=y +CONFIG_FSNOTIFY=y +CONFIG_DNOTIFY=y +CONFIG_INOTIFY_USER=y +# CONFIG_FANOTIFY is not set +CONFIG_QUOTA=y +CONFIG_QUOTA_NETLINK_INTERFACE=y +# CONFIG_PRINT_QUOTA_WARNING is not set +# CONFIG_QUOTA_DEBUG is not set +# CONFIG_QFMT_V1 is not set +# CONFIG_QFMT_V2 is not set +CONFIG_QUOTACTL=y +CONFIG_AUTOFS4_FS=y +CONFIG_FUSE_FS=y +# CONFIG_CUSE is not set + +# +# Caches +# +# CONFIG_FSCACHE is not set + +# +# CD-ROM/DVD Filesystems +# +CONFIG_ISO9660_FS=m +CONFIG_JOLIET=y +CONFIG_ZISOFS=y +CONFIG_UDF_FS=m +CONFIG_UDF_NLS=y + +# +# DOS/FAT/NT Filesystems +# +CONFIG_FAT_FS=y +CONFIG_MSDOS_FS=m +CONFIG_VFAT_FS=y +CONFIG_FAT_DEFAULT_CODEPAGE=437 +CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1" +# CONFIG_NTFS_FS is not set + +# +# Pseudo filesystems +# +CONFIG_PROC_FS=y +CONFIG_PROC_SYSCTL=y +CONFIG_PROC_PAGE_MONITOR=y +CONFIG_KERNFS=y +CONFIG_SYSFS=y +CONFIG_TMPFS=y +# CONFIG_TMPFS_POSIX_ACL is not set +# CONFIG_TMPFS_XATTR is not set +# CONFIG_HUGETLB_PAGE is not set +CONFIG_CONFIGFS_FS=m +CONFIG_MISC_FILESYSTEMS=y +# CONFIG_ADFS_FS is not set +# CONFIG_AFFS_FS is not set +# CONFIG_ECRYPT_FS is not set +# CONFIG_HFS_FS is not set +# CONFIG_HFSPLUS_FS is not set +# CONFIG_BEFS_FS is not set +# CONFIG_BFS_FS is not set +# CONFIG_EFS_FS is not set +CONFIG_JFFS2_FS=y +CONFIG_JFFS2_FS_DEBUG=0 +CONFIG_JFFS2_FS_WRITEBUFFER=y +# CONFIG_JFFS2_FS_WBUF_VERIFY is not set +# CONFIG_JFFS2_SUMMARY is not set +# CONFIG_JFFS2_FS_XATTR is not set +# CONFIG_JFFS2_COMPRESSION_OPTIONS is not set +CONFIG_JFFS2_ZLIB=y +# CONFIG_JFFS2_LZO is not set +CONFIG_JFFS2_RTIME=y +# CONFIG_JFFS2_RUBIN is not set +CONFIG_UBIFS_FS=y +# CONFIG_UBIFS_FS_ADVANCED_COMPR is not set +CONFIG_UBIFS_FS_LZO=y +CONFIG_UBIFS_FS_ZLIB=y +# CONFIG_LOGFS is not set +# CONFIG_CRAMFS is not set +# CONFIG_SQUASHFS is not set +# CONFIG_VXFS_FS is not set +# CONFIG_MINIX_FS is not set +# CONFIG_OMFS_FS is not set +# CONFIG_HPFS_FS is not set +# CONFIG_QNX4FS_FS is not set +# CONFIG_QNX6FS_FS is not set +# CONFIG_ROMFS_FS is not set +# CONFIG_PSTORE is not set +# CONFIG_SYSV_FS is not set +# CONFIG_UFS_FS is not set +# CONFIG_F2FS_FS is not set +CONFIG_NETWORK_FILESYSTEMS=y +CONFIG_NFS_FS=y +CONFIG_NFS_V2=y +CONFIG_NFS_V3=y +CONFIG_NFS_V3_ACL=y +CONFIG_NFS_V4=y +# CONFIG_NFS_SWAP is not set +# CONFIG_NFS_V4_1 is not set +CONFIG_ROOT_NFS=y +# CONFIG_NFS_USE_LEGACY_DNS is not set +CONFIG_NFS_USE_KERNEL_DNS=y +# CONFIG_NFSD is not set +CONFIG_LOCKD=y +CONFIG_LOCKD_V4=y +CONFIG_NFS_ACL_SUPPORT=y +CONFIG_NFS_COMMON=y +CONFIG_SUNRPC=y +CONFIG_SUNRPC_GSS=y +# CONFIG_SUNRPC_DEBUG is not set +# CONFIG_CEPH_FS is not set +# CONFIG_CIFS is not set +# CONFIG_NCP_FS is not set +# CONFIG_CODA_FS is not set +# CONFIG_AFS_FS is not set +CONFIG_NLS=y +CONFIG_NLS_DEFAULT="cp437" +CONFIG_NLS_CODEPAGE_437=y +# CONFIG_NLS_CODEPAGE_737 is not set +# CONFIG_NLS_CODEPAGE_775 is not set +# CONFIG_NLS_CODEPAGE_850 is not set +# CONFIG_NLS_CODEPAGE_852 is not set +# CONFIG_NLS_CODEPAGE_855 is not set +# CONFIG_NLS_CODEPAGE_857 is not set +# CONFIG_NLS_CODEPAGE_860 is not set +# CONFIG_NLS_CODEPAGE_861 is not set +# CONFIG_NLS_CODEPAGE_862 is not set +# CONFIG_NLS_CODEPAGE_863 is not set +# CONFIG_NLS_CODEPAGE_864 is not set +# CONFIG_NLS_CODEPAGE_865 is not set +# CONFIG_NLS_CODEPAGE_866 is not set +# CONFIG_NLS_CODEPAGE_869 is not set +# CONFIG_NLS_CODEPAGE_936 is not set +# CONFIG_NLS_CODEPAGE_950 is not set +# CONFIG_NLS_CODEPAGE_932 is not set +# CONFIG_NLS_CODEPAGE_949 is not set +# CONFIG_NLS_CODEPAGE_874 is not set +# CONFIG_NLS_ISO8859_8 is not set +# CONFIG_NLS_CODEPAGE_1250 is not set +# CONFIG_NLS_CODEPAGE_1251 is not set +CONFIG_NLS_ASCII=y +CONFIG_NLS_ISO8859_1=y +# CONFIG_NLS_ISO8859_2 is not set +# CONFIG_NLS_ISO8859_3 is not set +# CONFIG_NLS_ISO8859_4 is not set +# CONFIG_NLS_ISO8859_5 is not set +# CONFIG_NLS_ISO8859_6 is not set +# CONFIG_NLS_ISO8859_7 is not set +# CONFIG_NLS_ISO8859_9 is not set +# CONFIG_NLS_ISO8859_13 is not set +# CONFIG_NLS_ISO8859_14 is not set +CONFIG_NLS_ISO8859_15=m +# CONFIG_NLS_KOI8_R is not set +# CONFIG_NLS_KOI8_U is not set +# CONFIG_NLS_MAC_ROMAN is not set +# CONFIG_NLS_MAC_CELTIC is not set +# CONFIG_NLS_MAC_CENTEURO is not set +# CONFIG_NLS_MAC_CROATIAN is not set +# CONFIG_NLS_MAC_CYRILLIC is not set +# CONFIG_NLS_MAC_GAELIC is not set +# CONFIG_NLS_MAC_GREEK is not set +# CONFIG_NLS_MAC_ICELAND is not set +# CONFIG_NLS_MAC_INUIT is not set +# CONFIG_NLS_MAC_ROMANIAN is not set +# CONFIG_NLS_MAC_TURKISH is not set +CONFIG_NLS_UTF8=y +# CONFIG_DLM is not set + +# +# Kernel hacking +# + +# +# printk and dmesg options +# +# CONFIG_PRINTK_TIME is not set +CONFIG_DEFAULT_MESSAGE_LOGLEVEL=4 +# CONFIG_BOOT_PRINTK_DELAY is not set +# CONFIG_DYNAMIC_DEBUG is not set + +# +# Compile-time checks and compiler options +# +# CONFIG_DEBUG_INFO is not set +CONFIG_ENABLE_WARN_DEPRECATED=y +CONFIG_ENABLE_MUST_CHECK=y +CONFIG_FRAME_WARN=1024 +# CONFIG_STRIP_ASM_SYMS is not set +# CONFIG_READABLE_ASM is not set +# CONFIG_UNUSED_SYMBOLS is not set +CONFIG_DEBUG_FS=y +# CONFIG_HEADERS_CHECK is not set +# CONFIG_DEBUG_SECTION_MISMATCH is not set +CONFIG_FRAME_POINTER=y +# CONFIG_DEBUG_FORCE_WEAK_PER_CPU is not set +CONFIG_MAGIC_SYSRQ=y +CONFIG_MAGIC_SYSRQ_DEFAULT_ENABLE=0x1 +CONFIG_DEBUG_KERNEL=y + +# +# Memory Debugging +# +# CONFIG_DEBUG_PAGEALLOC is not set +# CONFIG_DEBUG_OBJECTS is not set +# CONFIG_SLUB_STATS is not set +CONFIG_HAVE_DEBUG_KMEMLEAK=y +# CONFIG_DEBUG_KMEMLEAK is not set +# CONFIG_DEBUG_STACK_USAGE is not set +# CONFIG_DEBUG_VM is not set +# CONFIG_DEBUG_MEMORY_INIT is not set +# CONFIG_DEBUG_PER_CPU_MAPS is not set +# CONFIG_DEBUG_HIGHMEM is not set +# CONFIG_DEBUG_SHIRQ is not set + +# +# Debug Lockups and Hangs +# +# CONFIG_LOCKUP_DETECTOR is not set +# CONFIG_DETECT_HUNG_TASK is not set +# CONFIG_PANIC_ON_OOPS is not set +CONFIG_PANIC_ON_OOPS_VALUE=0 +CONFIG_PANIC_TIMEOUT=0 +# CONFIG_SCHED_DEBUG is not set +# CONFIG_SCHEDSTATS is not set +# CONFIG_TIMER_STATS is not set + +# +# Lock Debugging (spinlocks, mutexes, etc...) +# +# CONFIG_DEBUG_RT_MUTEXES is not set +# CONFIG_RT_MUTEX_TESTER is not set +CONFIG_DEBUG_SPINLOCK=y +CONFIG_DEBUG_MUTEXES=y +# CONFIG_DEBUG_WW_MUTEX_SLOWPATH is not set +CONFIG_DEBUG_LOCK_ALLOC=y +CONFIG_PROVE_LOCKING=y +CONFIG_LOCKDEP=y +# CONFIG_LOCK_STAT is not set +# CONFIG_DEBUG_LOCKDEP is not set +# CONFIG_DEBUG_ATOMIC_SLEEP is not set +# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set +# CONFIG_LOCK_TORTURE_TEST is not set +CONFIG_TRACE_IRQFLAGS=y +CONFIG_STACKTRACE=y +# CONFIG_DEBUG_KOBJECT is not set +# CONFIG_DEBUG_BUGVERBOSE is not set +# CONFIG_DEBUG_LIST is not set +# CONFIG_DEBUG_PI_LIST is not set +# CONFIG_DEBUG_SG is not set +# CONFIG_DEBUG_NOTIFIERS is not set +# CONFIG_DEBUG_CREDENTIALS is not set + +# +# RCU Debugging +# +# CONFIG_PROVE_RCU is not set +# CONFIG_SPARSE_RCU_POINTER is not set +# CONFIG_TORTURE_TEST is not set +# CONFIG_RCU_TORTURE_TEST is not set +CONFIG_RCU_CPU_STALL_TIMEOUT=21 +# CONFIG_RCU_CPU_STALL_INFO is not set +# CONFIG_RCU_TRACE is not set +# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set +# CONFIG_NOTIFIER_ERROR_INJECTION is not set +# CONFIG_FAULT_INJECTION is not set +CONFIG_HAVE_FUNCTION_TRACER=y +CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y +CONFIG_HAVE_DYNAMIC_FTRACE=y +CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y +CONFIG_HAVE_SYSCALL_TRACEPOINTS=y +CONFIG_HAVE_C_RECORDMCOUNT=y +CONFIG_TRACING_SUPPORT=y +# CONFIG_FTRACE is not set + +# +# Runtime Testing +# +# CONFIG_LKDTM is not set +# CONFIG_TEST_LIST_SORT is not set +# CONFIG_BACKTRACE_SELF_TEST is not set +# CONFIG_RBTREE_TEST is not set +# CONFIG_INTERVAL_TREE_TEST is not set +# CONFIG_PERCPU_TEST is not set +# CONFIG_ATOMIC64_SELFTEST is not set +# CONFIG_TEST_STRING_HELPERS is not set +# CONFIG_TEST_KSTRTOX is not set +# CONFIG_DMA_API_DEBUG is not set +# CONFIG_TEST_MODULE is not set +# CONFIG_TEST_USER_COPY is not set +# CONFIG_TEST_BPF is not set +# CONFIG_SAMPLES is not set +CONFIG_HAVE_ARCH_KGDB=y +# CONFIG_KGDB is not set +# CONFIG_ARM_PTDUMP is not set +# CONFIG_STRICT_DEVMEM is not set +# CONFIG_ARM_UNWIND is not set +# CONFIG_DEBUG_USER is not set +# CONFIG_DEBUG_LL is not set +CONFIG_DEBUG_IMX_UART_PORT=1 +CONFIG_DEBUG_VF_UART_PORT=1 +CONFIG_DEBUG_LL_INCLUDE="mach/debug-macro.S" +# CONFIG_DEBUG_UART_PL01X is not set +# CONFIG_DEBUG_UART_8250 is not set +CONFIG_UNCOMPRESS_INCLUDE="debug/uncompress.h" +# CONFIG_PID_IN_CONTEXTIDR is not set +# CONFIG_DEBUG_SET_MODULE_RONX is not set + +# +# Security options +# +CONFIG_KEYS=y +# CONFIG_PERSISTENT_KEYRINGS is not set +# CONFIG_BIG_KEYS is not set +# CONFIG_ENCRYPTED_KEYS is not set +# CONFIG_KEYS_DEBUG_PROC_KEYS is not set +# CONFIG_SECURITY_DMESG_RESTRICT is not set +# CONFIG_SECURITY is not set +CONFIG_SECURITYFS=y +CONFIG_DEFAULT_SECURITY_DAC=y +CONFIG_DEFAULT_SECURITY="" +CONFIG_CRYPTO=y + +# +# Crypto core or helper +# +CONFIG_CRYPTO_ALGAPI=y +CONFIG_CRYPTO_ALGAPI2=y +CONFIG_CRYPTO_AEAD=y +CONFIG_CRYPTO_AEAD2=y +CONFIG_CRYPTO_BLKCIPHER=y +CONFIG_CRYPTO_BLKCIPHER2=y +CONFIG_CRYPTO_HASH=y +CONFIG_CRYPTO_HASH2=y +CONFIG_CRYPTO_RNG=y +CONFIG_CRYPTO_RNG2=y +CONFIG_CRYPTO_PCOMP2=y +CONFIG_CRYPTO_MANAGER=y +CONFIG_CRYPTO_MANAGER2=y +# CONFIG_CRYPTO_USER is not set +CONFIG_CRYPTO_MANAGER_DISABLE_TESTS=y +# CONFIG_CRYPTO_GF128MUL is not set +# CONFIG_CRYPTO_NULL is not set +# CONFIG_CRYPTO_PCRYPT is not set +CONFIG_CRYPTO_WORKQUEUE=y +# CONFIG_CRYPTO_CRYPTD is not set +# CONFIG_CRYPTO_AUTHENC is not set +# CONFIG_CRYPTO_TEST is not set + +# +# Authenticated Encryption with Associated Data +# +CONFIG_CRYPTO_CCM=y +# CONFIG_CRYPTO_GCM is not set +CONFIG_CRYPTO_SEQIV=y + +# +# Block modes +# +# CONFIG_CRYPTO_CBC is not set +CONFIG_CRYPTO_CTR=y +# CONFIG_CRYPTO_CTS is not set +# CONFIG_CRYPTO_ECB is not set +# CONFIG_CRYPTO_LRW is not set +# CONFIG_CRYPTO_PCBC is not set +# CONFIG_CRYPTO_XTS is not set + +# +# Hash modes +# +# CONFIG_CRYPTO_CMAC is not set +# CONFIG_CRYPTO_HMAC is not set +# CONFIG_CRYPTO_XCBC is not set +# CONFIG_CRYPTO_VMAC is not set + +# +# Digest +# +CONFIG_CRYPTO_CRC32C=y +# CONFIG_CRYPTO_CRC32 is not set +CONFIG_CRYPTO_CRCT10DIF=y +# CONFIG_CRYPTO_GHASH is not set +# CONFIG_CRYPTO_MD4 is not set +# CONFIG_CRYPTO_MD5 is not set +# CONFIG_CRYPTO_MICHAEL_MIC is not set +# CONFIG_CRYPTO_RMD128 is not set +# CONFIG_CRYPTO_RMD160 is not set +# CONFIG_CRYPTO_RMD256 is not set +# CONFIG_CRYPTO_RMD320 is not set +# CONFIG_CRYPTO_SHA1 is not set +# CONFIG_CRYPTO_SHA1_ARM is not set +# CONFIG_CRYPTO_SHA256 is not set +# CONFIG_CRYPTO_SHA512 is not set +# CONFIG_CRYPTO_TGR192 is not set +# CONFIG_CRYPTO_WP512 is not set + +# +# Ciphers +# +CONFIG_CRYPTO_AES=y +# CONFIG_CRYPTO_AES_ARM is not set +# CONFIG_CRYPTO_ANUBIS is not set +CONFIG_CRYPTO_ARC4=y +# CONFIG_CRYPTO_BLOWFISH is not set +# CONFIG_CRYPTO_CAMELLIA is not set +# CONFIG_CRYPTO_CAST5 is not set +# CONFIG_CRYPTO_CAST6 is not set +# CONFIG_CRYPTO_DES is not set +# CONFIG_CRYPTO_FCRYPT is not set +# CONFIG_CRYPTO_KHAZAD is not set +# CONFIG_CRYPTO_SALSA20 is not set +# CONFIG_CRYPTO_SEED is not set +# CONFIG_CRYPTO_SERPENT is not set +# CONFIG_CRYPTO_TEA is not set +# CONFIG_CRYPTO_TWOFISH is not set + +# +# Compression +# +CONFIG_CRYPTO_DEFLATE=y +# CONFIG_CRYPTO_ZLIB is not set +CONFIG_CRYPTO_LZO=y +# CONFIG_CRYPTO_LZ4 is not set +# CONFIG_CRYPTO_LZ4HC is not set + +# +# Random Number Generation +# +# CONFIG_CRYPTO_ANSI_CPRNG is not set +# CONFIG_CRYPTO_USER_API_HASH is not set +# CONFIG_CRYPTO_USER_API_SKCIPHER is not set +# CONFIG_CRYPTO_HW is not set +# CONFIG_ASYMMETRIC_KEY_TYPE is not set +# CONFIG_BINARY_PRINTF is not set + +# +# Library routines +# +CONFIG_BITREVERSE=y +CONFIG_RATIONAL=y +CONFIG_GENERIC_STRNCPY_FROM_USER=y +CONFIG_GENERIC_STRNLEN_USER=y +CONFIG_GENERIC_NET_UTILS=y +CONFIG_GENERIC_PCI_IOMAP=y +CONFIG_GENERIC_IO=y +CONFIG_STMP_DEVICE=y +CONFIG_ARCH_USE_CMPXCHG_LOCKREF=y +CONFIG_CRC_CCITT=m +CONFIG_CRC16=y +CONFIG_CRC_T10DIF=y +CONFIG_CRC_ITU_T=m +CONFIG_CRC32=y +# CONFIG_CRC32_SELFTEST is not set +CONFIG_CRC32_SLICEBY8=y +# CONFIG_CRC32_SLICEBY4 is not set +# CONFIG_CRC32_SARWATE is not set +# CONFIG_CRC32_BIT is not set +CONFIG_CRC7=m +CONFIG_LIBCRC32C=m +# CONFIG_CRC8 is not set +# CONFIG_AUDIT_ARCH_COMPAT_GENERIC is not set +# CONFIG_RANDOM32_SELFTEST is not set +CONFIG_ZLIB_INFLATE=y +CONFIG_ZLIB_DEFLATE=y +CONFIG_LZO_COMPRESS=y +CONFIG_LZO_DECOMPRESS=y +# CONFIG_XZ_DEC is not set +# CONFIG_XZ_DEC_BCJ is not set +CONFIG_DECOMPRESS_GZIP=y +CONFIG_GENERIC_ALLOCATOR=y +CONFIG_ASSOCIATIVE_ARRAY=y +CONFIG_HAS_IOMEM=y +CONFIG_HAS_IOPORT_MAP=y +CONFIG_HAS_DMA=y +CONFIG_CPU_RMAP=y +CONFIG_DQL=y +CONFIG_NLATTR=y +CONFIG_GENERIC_ATOMIC64=y +CONFIG_ARCH_HAS_ATOMIC64_DEC_IF_POSITIVE=y +CONFIG_AVERAGE=y +# CONFIG_CORDIC is not set +# CONFIG_DDR is not set +CONFIG_LIBFDT=y +CONFIG_OID_REGISTRY=y +CONFIG_FONT_SUPPORT=y +CONFIG_FONTS=y +CONFIG_FONT_8x8=y +CONFIG_FONT_8x16=y +# CONFIG_FONT_6x11 is not set +# CONFIG_FONT_7x14 is not set +# CONFIG_FONT_PEARL_8x8 is not set +# CONFIG_FONT_ACORN_8x8 is not set +# CONFIG_FONT_MINI_4x6 is not set +# CONFIG_FONT_SUN8x16 is not set +# CONFIG_FONT_SUN12x22 is not set +# CONFIG_FONT_10x18 is not set +# CONFIG_VIRTUALIZATION is not set diff --git a/examples/yocto/meta-mini/recipes-kernel/linux-vanilla/linux-vanilla_3.16.1.bb b/examples/yocto/meta-mini/recipes-kernel/linux-vanilla/linux-vanilla_3.16.1.bb new file mode 100644 index 0000000..4f1e406 --- /dev/null +++ b/examples/yocto/meta-mini/recipes-kernel/linux-vanilla/linux-vanilla_3.16.1.bb @@ -0,0 +1,31 @@ +SECTION = "kernel" +DESCRIPTION = "Linux vanilla kernel" +LICENSE = "GPLv2" +LIC_FILES_CHKSUM = "file://COPYING;md5=d7810fab7487fb0aad327b76f1be7cd7" +KERNEL_IMAGETYPE ?= "uImage" + +inherit kernel + +require recipes-kernel/linux/linux-dtb.inc + +COMPATIBLE_MACHINE_imx6qsabrelite = "imx6qsabrelite" +COMPATIBLE_MACHINE_beaglebone-black = "beaglebone-black" + +KERNEL_DEVICETREE_imx6qsabrelite = "arch/arm/boot/dts/imx6q-sabrelite.dts" +KERNEL_DEVICETREE_beaglebone-black = "arch/arm/boot/dts/am335x-boneblack.dts" + +S = "${WORKDIR}/linux-${PV}" + +SRC_URI = "https://www.kernel.org/pub/linux/kernel/v3.x/linux-${PV}.tar.xz \ + file://defconfig \ +" + +SRC_URI[md5sum] = "e7a985a243b7941b6bc6240fcbc797fc" +SRC_URI[sha256sum] = "be37dda8ea090525661d64e5c7fc8580f313b7f9ba8592e32120f1332bc57d71" + +LINUX_VERSION_EXTENSION = "-linutronix" +KERNEL_EXTRA_ARGS += "LOADADDR=${UBOOT_ENTRYPOINT}" + +do_configure_prepend () { + cp '${WORKDIR}/defconfig' '${S}/.config' +} diff --git a/examples/yocto/meta-mini/recipes-kernel/recipes-bsp/mini-image/maxi-mini-image.bb b/examples/yocto/meta-mini/recipes-kernel/recipes-bsp/mini-image/maxi-mini-image.bb new file mode 100644 index 0000000..bae7f2a --- /dev/null +++ b/examples/yocto/meta-mini/recipes-kernel/recipes-bsp/mini-image/maxi-mini-image.bb @@ -0,0 +1,3 @@ +require /home/local/src/poky/meta-mini/recipes-bsp/mini-image/mini-image.bb +IMAGE_INSTALL = "eglibc hello hellocm autohello" +DESCRIPTION = "" diff --git a/examples/yocto/meta-mini/recipes-kernel/recipes-bsp/mini-image/mini-image.bb b/examples/yocto/meta-mini/recipes-kernel/recipes-bsp/mini-image/mini-image.bb new file mode 100644 index 0000000..7049969 --- /dev/null +++ b/examples/yocto/meta-mini/recipes-kernel/recipes-bsp/mini-image/mini-image.bb @@ -0,0 +1,2 @@ +IMAGE_LINGUAS = " " +inherit core-image diff --git a/examples/yocto/meta-mini/recipes-kernel/recipes-bsp/u-boot/u-boot-script_git.bb b/examples/yocto/meta-mini/recipes-kernel/recipes-bsp/u-boot/u-boot-script_git.bb new file mode 100644 index 0000000..c0b88e1 --- /dev/null +++ b/examples/yocto/meta-mini/recipes-kernel/recipes-bsp/u-boot/u-boot-script_git.bb @@ -0,0 +1,63 @@ +LICENSE = "GPLv2+" +LIC_FILES_CHKSUM = "file://Licenses/README;md5=025bf9f768cbcb1a165dbe1a110babfb" +DEPENDS = "u-boot-mkimage-native" + +PV = "v2014.01+git${SRCPV}" + +SRCREV = "aed9475361820a65e37ed936c833322cbbc0f2b5" +SRCBRANCH = "v2014.04-20140419" +SRC_URI = "git://github.com/boundarydevices/u-boot-imx6.git;protocol=https;branch=${SRCBRANCH}" + +S = "${WORKDIR}/git" + +inherit deploy + +do_mkimage () { + + # allow deploy to use the ${MACHINE} name to simplify things + if [ ! -d board/boundary/${MACHINE} ]; then + mkdir board/boundary/${MACHINE} + fi + bootscript=board/boundary/nitrogen6x/6x_bootscript-yocto.txt; + if ! [ -f $bootscript ]; then + bootscript=board/boundary/nitrogen6x/6x_bootscript-yocto.txt; + fi + echo "bootscript == $bootscript" + + upgradescript=board/boundary/nitrogen6x/6x_upgrade.txt; + if ! [ -f $upgradescript ]; then + upgradescript=board/boundary/nitrogen6x/6x_upgrade.txt; + fi + + uboot-mkimage -A arm -O linux -T script -C none -a 0 -e 0 \ + -n "boot script" -d $bootscript \ + board/boundary/${MACHINE}/6x_bootscript + + uboot-mkimage -A arm -O linux -T script -C none -a 0 -e 0 \ + -n "upgrade script" -d $upgradescript \ + board/boundary/${MACHINE}/6x_upgrade +} + +addtask mkimage after do_compile before do_install + +do_deploy () { + install -d ${DEPLOYDIR} + install ${S}/board/boundary/${MACHINE}/6x_bootscript \ + ${DEPLOYDIR}/6x_bootscript-${MACHINE}-${PV}-${PR} + install ${S}/board/boundary/${MACHINE}/6x_upgrade \ + ${DEPLOYDIR}/6x_upgrade-${MACHINE}-${PV}-${PR} + + cd ${DEPLOYDIR} + rm -f 6x_bootscript-${MACHINE} 6x_upgrade-${MACHINE} + ln -sf 6x_bootscript-${MACHINE}-${PV}-${PR} 6x_bootscript-${MACHINE} + ln -sf 6x_upgrade-${MACHINE}-${PV}-${PR} 6x_upgrade-${MACHINE} +} + +addtask deploy after do_install before do_build + +do_compile[noexec] = "1" +do_install[noexec] = "1" +do_populate_sysroot[noexec] = "1" + +PACKAGE_ARCH = "${MACHINE_ARCH}" +COMPATIBLE_MACHINE = "(imx6qsabrelite)" diff --git a/examples/yocto/meta-mini/recipes-kernel/recipes-core/eglibc/eglibc-locale_2.19.bbappend b/examples/yocto/meta-mini/recipes-kernel/recipes-core/eglibc/eglibc-locale_2.19.bbappend new file mode 100644 index 0000000..51f69e5 --- /dev/null +++ b/examples/yocto/meta-mini/recipes-kernel/recipes-core/eglibc/eglibc-locale_2.19.bbappend @@ -0,0 +1,2 @@ +do_package_qa () { +} diff --git a/examples/yocto/meta-mini/recipes-kernel/recipes-kernel/linux-vanilla/files/beaglebone-black/omap2plus_defconfig b/examples/yocto/meta-mini/recipes-kernel/recipes-kernel/linux-vanilla/files/beaglebone-black/omap2plus_defconfig new file mode 100644 index 0000000..536a137 --- /dev/null +++ b/examples/yocto/meta-mini/recipes-kernel/recipes-kernel/linux-vanilla/files/beaglebone-black/omap2plus_defconfig @@ -0,0 +1,308 @@ +CONFIG_SYSVIPC=y +CONFIG_POSIX_MQUEUE=y +CONFIG_NO_HZ=y +CONFIG_HIGH_RES_TIMERS=y +CONFIG_BSD_PROCESS_ACCT=y +CONFIG_IKCONFIG=y +CONFIG_IKCONFIG_PROC=y +CONFIG_LOG_BUF_SHIFT=16 +CONFIG_BLK_DEV_INITRD=y +CONFIG_EXPERT=y +CONFIG_SLAB=y +CONFIG_PROFILING=y +CONFIG_OPROFILE=y +CONFIG_KPROBES=y +CONFIG_MODULES=y +CONFIG_MODULE_FORCE_LOAD=y +CONFIG_MODULE_UNLOAD=y +CONFIG_MODULE_FORCE_UNLOAD=y +CONFIG_MODVERSIONS=y +CONFIG_MODULE_SRCVERSION_ALL=y +# CONFIG_BLK_DEV_BSG is not set +CONFIG_PARTITION_ADVANCED=y +CONFIG_ARCH_MULTI_V6=y +CONFIG_POWER_AVS_OMAP=y +CONFIG_POWER_AVS_OMAP_CLASS3=y +CONFIG_OMAP_RESET_CLOCKS=y +CONFIG_OMAP_MUX_DEBUG=y +CONFIG_ARCH_OMAP2=y +CONFIG_ARCH_OMAP3=y +CONFIG_ARCH_OMAP4=y +CONFIG_SOC_OMAP5=y +CONFIG_SOC_AM33XX=y +CONFIG_SOC_AM43XX=y +CONFIG_SOC_DRA7XX=y +CONFIG_CACHE_L2X0=y +CONFIG_ARM_THUMBEE=y +CONFIG_ARM_ERRATA_411920=y +CONFIG_SMP=y +CONFIG_NR_CPUS=2 +CONFIG_CMA=y +CONFIG_ZBOOT_ROM_TEXT=0x0 +CONFIG_ZBOOT_ROM_BSS=0x0 +CONFIG_ARM_APPENDED_DTB=y +CONFIG_ARM_ATAG_DTB_COMPAT=y +CONFIG_CMDLINE="root=/dev/mmcblk0p2 rootwait console=ttyO2,115200" +CONFIG_KEXEC=y +CONFIG_FPE_NWFPE=y +CONFIG_CPU_IDLE=y +CONFIG_BINFMT_MISC=y +CONFIG_PM_DEBUG=y +CONFIG_NET=y +CONFIG_PACKET=y +CONFIG_UNIX=y +CONFIG_XFRM_USER=y +CONFIG_NET_KEY=y +CONFIG_NET_KEY_MIGRATE=y +CONFIG_INET=y +CONFIG_IP_MULTICAST=y +CONFIG_IP_PNP=y +CONFIG_IP_PNP_DHCP=y +CONFIG_IP_PNP_BOOTP=y +CONFIG_IP_PNP_RARP=y +# CONFIG_INET_LRO is not set +# CONFIG_IPV6 is not set +CONFIG_NETFILTER=y +CONFIG_CAN=m +CONFIG_CAN_C_CAN=m +CONFIG_CAN_C_CAN_PLATFORM=m +CONFIG_BT=m +CONFIG_BT_HCIUART=m +CONFIG_BT_HCIUART_H4=y +CONFIG_BT_HCIUART_BCSP=y +CONFIG_BT_HCIUART_LL=y +CONFIG_BT_HCIBCM203X=m +CONFIG_BT_HCIBPA10X=m +CONFIG_CFG80211=m +CONFIG_MAC80211=m +CONFIG_MAC80211_RC_PID=y +CONFIG_MAC80211_RC_DEFAULT_PID=y +CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" +CONFIG_DEVTMPFS=y +CONFIG_DEVTMPFS_MOUNT=y +CONFIG_DMA_CMA=y +CONFIG_OMAP_OCP2SCP=y +CONFIG_CONNECTOR=y +CONFIG_MTD=y +CONFIG_MTD_CMDLINE_PARTS=y +CONFIG_MTD_BLOCK=y +CONFIG_MTD_OOPS=y +CONFIG_MTD_CFI=y +CONFIG_MTD_CFI_INTELEXT=y +CONFIG_MTD_NAND=y +CONFIG_MTD_NAND_OMAP2=y +CONFIG_MTD_ONENAND=y +CONFIG_MTD_ONENAND_VERIFY_WRITE=y +CONFIG_MTD_ONENAND_OMAP2=y +CONFIG_MTD_UBI=y +CONFIG_BLK_DEV_LOOP=y +CONFIG_BLK_DEV_RAM=y +CONFIG_BLK_DEV_RAM_SIZE=16384 +CONFIG_SENSORS_TSL2550=m +CONFIG_BMP085_I2C=m +CONFIG_SENSORS_LIS3_I2C=m +CONFIG_SCSI=y +CONFIG_BLK_DEV_SD=y +CONFIG_SCSI_MULTI_LUN=y +CONFIG_SCSI_SCAN_ASYNC=y +CONFIG_MD=y +CONFIG_NETDEVICES=y +CONFIG_KS8851=y +CONFIG_KS8851_MLL=y +CONFIG_SMC91X=y +CONFIG_SMSC911X=y +CONFIG_TI_CPSW=y +CONFIG_AT803X_PHY=y +CONFIG_SMSC_PHY=y +CONFIG_USB_USBNET=y +CONFIG_USB_NET_SMSC95XX=y +CONFIG_USB_ALI_M5632=y +CONFIG_USB_AN2720=y +CONFIG_USB_EPSON2888=y +CONFIG_USB_KC2190=y +CONFIG_LIBERTAS=m +CONFIG_LIBERTAS_USB=m +CONFIG_LIBERTAS_SDIO=m +CONFIG_LIBERTAS_DEBUG=y +CONFIG_WL_TI=y +CONFIG_WL12XX=m +CONFIG_WL18XX=m +CONFIG_WLCORE_SPI=m +CONFIG_WLCORE_SDIO=m +CONFIG_MWIFIEX=m +CONFIG_MWIFIEX_SDIO=m +CONFIG_MWIFIEX_USB=m +CONFIG_INPUT_JOYDEV=y +CONFIG_INPUT_EVDEV=y +CONFIG_KEYBOARD_GPIO=y +CONFIG_KEYBOARD_MATRIX=m +CONFIG_KEYBOARD_TWL4030=y +CONFIG_INPUT_TOUCHSCREEN=y +CONFIG_TOUCHSCREEN_ADS7846=y +CONFIG_INPUT_MISC=y +CONFIG_INPUT_TWL4030_PWRBUTTON=y +# CONFIG_LEGACY_PTYS is not set +CONFIG_SERIAL_8250=y +CONFIG_SERIAL_8250_CONSOLE=y +CONFIG_SERIAL_8250_NR_UARTS=32 +CONFIG_SERIAL_8250_EXTENDED=y +CONFIG_SERIAL_8250_MANY_PORTS=y +CONFIG_SERIAL_8250_SHARE_IRQ=y +CONFIG_SERIAL_8250_DETECT_IRQ=y +CONFIG_SERIAL_8250_RSA=y +CONFIG_SERIAL_OF_PLATFORM=y +CONFIG_SERIAL_OMAP=y +CONFIG_SERIAL_OMAP_CONSOLE=y +CONFIG_HW_RANDOM=y +CONFIG_I2C_CHARDEV=y +CONFIG_SPI=y +CONFIG_SPI_OMAP24XX=y +CONFIG_PINCTRL_SINGLE=y +CONFIG_DEBUG_GPIO=y +CONFIG_GPIO_SYSFS=y +CONFIG_GPIO_TWL4030=y +CONFIG_W1=y +CONFIG_POWER_SUPPLY=y +CONFIG_POWER_AVS=y +CONFIG_SENSORS_LM75=m +CONFIG_THERMAL=y +CONFIG_THERMAL_GOV_FAIR_SHARE=y +CONFIG_THERMAL_GOV_USER_SPACE=y +CONFIG_CPU_THERMAL=y +CONFIG_TI_SOC_THERMAL=y +CONFIG_TI_THERMAL=y +CONFIG_OMAP4_THERMAL=y +CONFIG_OMAP5_THERMAL=y +CONFIG_DRA752_THERMAL=y +CONFIG_WATCHDOG=y +CONFIG_OMAP_WATCHDOG=y +CONFIG_TWL4030_WATCHDOG=y +CONFIG_MFD_SYSCON=y +CONFIG_MFD_PALMAS=y +CONFIG_MFD_TPS65217=y +CONFIG_MFD_TPS65910=y +CONFIG_TWL6040_CORE=y +CONFIG_REGULATOR_FIXED_VOLTAGE=y +CONFIG_REGULATOR_PALMAS=y +CONFIG_REGULATOR_TI_ABB=y +CONFIG_REGULATOR_TPS65023=y +CONFIG_REGULATOR_TPS6507X=y +CONFIG_REGULATOR_TPS65217=y +CONFIG_REGULATOR_TPS65910=y +CONFIG_REGULATOR_TWL4030=y +CONFIG_REGULATOR_PBIAS=y +CONFIG_FB=y +CONFIG_FIRMWARE_EDID=y +CONFIG_FB_MODE_HELPERS=y +CONFIG_FB_TILEBLITTING=y +CONFIG_OMAP2_DSS=m +CONFIG_OMAP2_DSS_SDI=y +CONFIG_OMAP2_DSS_DSI=y +CONFIG_FB_OMAP2=m +CONFIG_DISPLAY_ENCODER_TFP410=m +CONFIG_DISPLAY_ENCODER_TPD12S015=m +CONFIG_DISPLAY_CONNECTOR_DVI=m +CONFIG_DISPLAY_CONNECTOR_HDMI=m +CONFIG_DISPLAY_PANEL_DPI=m +CONFIG_BACKLIGHT_LCD_SUPPORT=y +CONFIG_LCD_CLASS_DEVICE=y +CONFIG_LCD_PLATFORM=y +CONFIG_FRAMEBUFFER_CONSOLE=y +CONFIG_FRAMEBUFFER_CONSOLE_ROTATION=y +CONFIG_LOGO=y +CONFIG_SOUND=m +CONFIG_SND=m +CONFIG_SND_MIXER_OSS=m +CONFIG_SND_PCM_OSS=m +CONFIG_SND_VERBOSE_PRINTK=y +CONFIG_SND_DEBUG=y +CONFIG_SND_USB_AUDIO=m +CONFIG_SND_SOC=m +CONFIG_SND_OMAP_SOC=m +CONFIG_SND_AM33XX_SOC_EVM=m +CONFIG_SND_DAVINCI_SOC=m +CONFIG_SND_OMAP_SOC_OMAP_TWL4030=m +CONFIG_SND_OMAP_SOC_OMAP_ABE_TWL6040=m +CONFIG_SND_OMAP_SOC_OMAP3_PANDORA=m +CONFIG_USB=y +CONFIG_USB_ANNOUNCE_NEW_DEVICES=y +CONFIG_USB_MON=y +CONFIG_USB_WDM=y +CONFIG_USB_STORAGE=y +CONFIG_USB_DWC3=m +CONFIG_USB_TEST=y +CONFIG_NOP_USB_XCEIV=y +CONFIG_OMAP_USB2=y +CONFIG_TI_PIPE3=y +CONFIG_AM335X_PHY_USB=y +CONFIG_USB_GADGET=y +CONFIG_USB_GADGET_DEBUG=y +CONFIG_USB_GADGET_DEBUG_FILES=y +CONFIG_USB_GADGET_DEBUG_FS=y +CONFIG_USB_ZERO=m +CONFIG_MMC=y +CONFIG_MMC_UNSAFE_RESUME=y +CONFIG_SDIO_UART=y +CONFIG_MMC_OMAP=y +CONFIG_MMC_OMAP_HS=y +CONFIG_NEW_LEDS=y +CONFIG_LEDS_CLASS=y +CONFIG_LEDS_GPIO=y +CONFIG_LEDS_TRIGGERS=y +CONFIG_LEDS_TRIGGER_TIMER=y +CONFIG_LEDS_TRIGGER_ONESHOT=y +CONFIG_LEDS_TRIGGER_HEARTBEAT=y +CONFIG_LEDS_TRIGGER_BACKLIGHT=y +CONFIG_LEDS_TRIGGER_CPU=y +CONFIG_LEDS_TRIGGER_GPIO=y +CONFIG_LEDS_TRIGGER_DEFAULT_ON=y +CONFIG_RTC_CLASS=y +CONFIG_RTC_DRV_TWL92330=y +CONFIG_RTC_DRV_TWL4030=y +CONFIG_RTC_DRV_OMAP=y +CONFIG_DMADEVICES=y +CONFIG_TI_EDMA=y +CONFIG_DMA_OMAP=y +CONFIG_EXTCON=y +CONFIG_EXTCON_PALMAS=y +CONFIG_EXT2_FS=y +CONFIG_EXT3_FS=y +# CONFIG_EXT3_FS_XATTR is not set +CONFIG_EXT4_FS=y +CONFIG_QUOTA=y +CONFIG_QFMT_V2=y +CONFIG_MSDOS_FS=y +CONFIG_VFAT_FS=y +CONFIG_TMPFS=y +CONFIG_JFFS2_FS=y +CONFIG_JFFS2_SUMMARY=y +CONFIG_JFFS2_FS_XATTR=y +CONFIG_JFFS2_COMPRESSION_OPTIONS=y +CONFIG_JFFS2_LZO=y +CONFIG_JFFS2_RUBIN=y +CONFIG_UBIFS_FS=y +CONFIG_CRAMFS=y +CONFIG_NFS_FS=y +CONFIG_NFS_V3_ACL=y +CONFIG_NFS_V4=y +CONFIG_ROOT_NFS=y +CONFIG_NLS_CODEPAGE_437=y +CONFIG_NLS_ISO8859_1=y +CONFIG_PRINTK_TIME=y +CONFIG_DEBUG_INFO=y +CONFIG_MAGIC_SYSRQ=y +CONFIG_SCHEDSTATS=y +CONFIG_TIMER_STATS=y +CONFIG_PROVE_LOCKING=y +# CONFIG_DEBUG_BUGVERBOSE is not set +CONFIG_SECURITY=y +CONFIG_CRYPTO_MICHAEL_MIC=y +# CONFIG_CRYPTO_ANSI_CPRNG is not set +CONFIG_CRC_CCITT=y +CONFIG_CRC_T10DIF=y +CONFIG_CRC_ITU_T=y +CONFIG_CRC7=y +CONFIG_LIBCRC32C=y +CONFIG_FONTS=y +CONFIG_FONT_8x8=y +CONFIG_FONT_8x16=y diff --git a/examples/yocto/meta-mini/recipes-kernel/recipes-kernel/linux-vanilla/files/imx6qsabrelite/defconfig b/examples/yocto/meta-mini/recipes-kernel/recipes-kernel/linux-vanilla/files/imx6qsabrelite/defconfig new file mode 100644 index 0000000..d4b216a --- /dev/null +++ b/examples/yocto/meta-mini/recipes-kernel/recipes-kernel/linux-vanilla/files/imx6qsabrelite/defconfig @@ -0,0 +1,3721 @@ +# +# Automatically generated file; DO NOT EDIT. +# Linux/arm 3.16.1 Kernel Configuration +# +CONFIG_ARM=y +CONFIG_ARM_HAS_SG_CHAIN=y +CONFIG_MIGHT_HAVE_PCI=y +CONFIG_SYS_SUPPORTS_APM_EMULATION=y +CONFIG_HAVE_PROC_CPU=y +CONFIG_STACKTRACE_SUPPORT=y +CONFIG_LOCKDEP_SUPPORT=y +CONFIG_TRACE_IRQFLAGS_SUPPORT=y +CONFIG_RWSEM_XCHGADD_ALGORITHM=y +CONFIG_GENERIC_HWEIGHT=y +CONFIG_GENERIC_CALIBRATE_DELAY=y +CONFIG_NEED_DMA_MAP_STATE=y +CONFIG_ARCH_SUPPORTS_UPROBES=y +CONFIG_FIQ=y +CONFIG_VECTORS_BASE=0xffff0000 +CONFIG_ARM_PATCH_PHYS_VIRT=y +CONFIG_GENERIC_BUG=y +CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" +CONFIG_IRQ_WORK=y +CONFIG_BUILDTIME_EXTABLE_SORT=y + +# +# General setup +# +CONFIG_INIT_ENV_ARG_LIMIT=32 +CONFIG_CROSS_COMPILE="" +# CONFIG_COMPILE_TEST is not set +CONFIG_LOCALVERSION="" +CONFIG_LOCALVERSION_AUTO=y +CONFIG_HAVE_KERNEL_GZIP=y +CONFIG_HAVE_KERNEL_LZMA=y +CONFIG_HAVE_KERNEL_XZ=y +CONFIG_HAVE_KERNEL_LZO=y +CONFIG_HAVE_KERNEL_LZ4=y +# CONFIG_KERNEL_GZIP is not set +# CONFIG_KERNEL_LZMA is not set +# CONFIG_KERNEL_XZ is not set +CONFIG_KERNEL_LZO=y +# CONFIG_KERNEL_LZ4 is not set +CONFIG_DEFAULT_HOSTNAME="(none)" +CONFIG_SWAP=y +CONFIG_SYSVIPC=y +CONFIG_SYSVIPC_SYSCTL=y +# CONFIG_POSIX_MQUEUE is not set +CONFIG_CROSS_MEMORY_ATTACH=y +# CONFIG_FHANDLE is not set +CONFIG_USELIB=y +# CONFIG_AUDIT is not set +CONFIG_HAVE_ARCH_AUDITSYSCALL=y + +# +# IRQ subsystem +# +CONFIG_GENERIC_IRQ_PROBE=y +CONFIG_GENERIC_IRQ_SHOW=y +CONFIG_HARDIRQS_SW_RESEND=y +CONFIG_GENERIC_IRQ_CHIP=y +CONFIG_IRQ_DOMAIN=y +# CONFIG_IRQ_DOMAIN_DEBUG is not set +CONFIG_IRQ_FORCED_THREADING=y +CONFIG_SPARSE_IRQ=y +CONFIG_KTIME_SCALAR=y +CONFIG_GENERIC_CLOCKEVENTS=y +CONFIG_GENERIC_CLOCKEVENTS_BUILD=y +CONFIG_ARCH_HAS_TICK_BROADCAST=y +CONFIG_GENERIC_CLOCKEVENTS_BROADCAST=y + +# +# Timers subsystem +# +CONFIG_TICK_ONESHOT=y +CONFIG_NO_HZ_COMMON=y +# CONFIG_HZ_PERIODIC is not set +CONFIG_NO_HZ_IDLE=y +# CONFIG_NO_HZ_FULL is not set +CONFIG_NO_HZ=y +CONFIG_HIGH_RES_TIMERS=y + +# +# CPU/Task time and stats accounting +# +CONFIG_TICK_CPU_ACCOUNTING=y +# CONFIG_VIRT_CPU_ACCOUNTING_GEN is not set +# CONFIG_IRQ_TIME_ACCOUNTING is not set +# CONFIG_BSD_PROCESS_ACCT is not set +# CONFIG_TASKSTATS is not set + +# +# RCU Subsystem +# +CONFIG_TREE_RCU=y +# CONFIG_PREEMPT_RCU is not set +CONFIG_RCU_STALL_COMMON=y +# CONFIG_RCU_USER_QS is not set +CONFIG_RCU_FANOUT=32 +CONFIG_RCU_FANOUT_LEAF=16 +# CONFIG_RCU_FANOUT_EXACT is not set +# CONFIG_RCU_FAST_NO_HZ is not set +# CONFIG_TREE_RCU_TRACE is not set +# CONFIG_RCU_NOCB_CPU is not set +# CONFIG_IKCONFIG is not set +CONFIG_LOG_BUF_SHIFT=18 +CONFIG_GENERIC_SCHED_CLOCK=y +CONFIG_CGROUPS=y +# CONFIG_CGROUP_DEBUG is not set +# CONFIG_CGROUP_FREEZER is not set +# CONFIG_CGROUP_DEVICE is not set +# CONFIG_CPUSETS is not set +# CONFIG_CGROUP_CPUACCT is not set +# CONFIG_RESOURCE_COUNTERS is not set +# CONFIG_CGROUP_PERF is not set +# CONFIG_CGROUP_SCHED is not set +# CONFIG_BLK_CGROUP is not set +# CONFIG_CHECKPOINT_RESTORE is not set +# CONFIG_NAMESPACES is not set +# CONFIG_SCHED_AUTOGROUP is not set +# CONFIG_SYSFS_DEPRECATED is not set +CONFIG_RELAY=y +CONFIG_BLK_DEV_INITRD=y +CONFIG_INITRAMFS_SOURCE="" +CONFIG_RD_GZIP=y +# CONFIG_RD_BZIP2 is not set +# CONFIG_RD_LZMA is not set +# CONFIG_RD_XZ is not set +# CONFIG_RD_LZO is not set +# CONFIG_RD_LZ4 is not set +# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set +CONFIG_SYSCTL=y +CONFIG_ANON_INODES=y +CONFIG_HAVE_UID16=y +CONFIG_EXPERT=y +CONFIG_UID16=y +# CONFIG_SGETMASK_SYSCALL is not set +CONFIG_SYSFS_SYSCALL=y +# CONFIG_SYSCTL_SYSCALL is not set +CONFIG_KALLSYMS=y +CONFIG_KALLSYMS_ALL=y +CONFIG_PRINTK=y +CONFIG_BUG=y +CONFIG_ELF_CORE=y +CONFIG_BASE_FULL=y +CONFIG_FUTEX=y +CONFIG_EPOLL=y +CONFIG_SIGNALFD=y +CONFIG_TIMERFD=y +CONFIG_EVENTFD=y +CONFIG_SHMEM=y +CONFIG_AIO=y +CONFIG_PCI_QUIRKS=y +# CONFIG_EMBEDDED is not set +CONFIG_HAVE_PERF_EVENTS=y +CONFIG_PERF_USE_VMALLOC=y + +# +# Kernel Performance Events And Counters +# +CONFIG_PERF_EVENTS=y +# CONFIG_DEBUG_PERF_USE_VMALLOC is not set +CONFIG_VM_EVENT_COUNTERS=y +# CONFIG_SLUB_DEBUG is not set +# CONFIG_COMPAT_BRK is not set +# CONFIG_SLAB is not set +CONFIG_SLUB=y +# CONFIG_SLOB is not set +CONFIG_SLUB_CPU_PARTIAL=y +# CONFIG_SYSTEM_TRUSTED_KEYRING is not set +# CONFIG_PROFILING is not set +CONFIG_HAVE_OPROFILE=y +# CONFIG_KPROBES is not set +# CONFIG_JUMP_LABEL is not set +# CONFIG_UPROBES is not set +# CONFIG_HAVE_64BIT_ALIGNED_ACCESS is not set +CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y +CONFIG_ARCH_USE_BUILTIN_BSWAP=y +CONFIG_HAVE_KPROBES=y +CONFIG_HAVE_KRETPROBES=y +CONFIG_HAVE_ARCH_TRACEHOOK=y +CONFIG_HAVE_DMA_ATTRS=y +CONFIG_HAVE_DMA_CONTIGUOUS=y +CONFIG_GENERIC_SMP_IDLE_THREAD=y +CONFIG_GENERIC_IDLE_POLL_SETUP=y +CONFIG_HAVE_REGS_AND_STACK_ACCESS_API=y +CONFIG_HAVE_CLK=y +CONFIG_HAVE_DMA_API_DEBUG=y +CONFIG_HAVE_HW_BREAKPOINT=y +CONFIG_HAVE_PERF_REGS=y +CONFIG_HAVE_PERF_USER_STACK_DUMP=y +CONFIG_HAVE_ARCH_JUMP_LABEL=y +CONFIG_ARCH_WANT_IPC_PARSE_VERSION=y +CONFIG_HAVE_ARCH_SECCOMP_FILTER=y +CONFIG_HAVE_CC_STACKPROTECTOR=y +# CONFIG_CC_STACKPROTECTOR is not set +CONFIG_CC_STACKPROTECTOR_NONE=y +# CONFIG_CC_STACKPROTECTOR_REGULAR is not set +# CONFIG_CC_STACKPROTECTOR_STRONG is not set +CONFIG_HAVE_CONTEXT_TRACKING=y +CONFIG_HAVE_VIRT_CPU_ACCOUNTING_GEN=y +CONFIG_HAVE_IRQ_TIME_ACCOUNTING=y +CONFIG_MODULES_USE_ELF_REL=y +CONFIG_CLONE_BACKWARDS=y +CONFIG_OLD_SIGSUSPEND3=y +CONFIG_OLD_SIGACTION=y + +# +# GCOV-based kernel profiling +# +# CONFIG_GCOV_KERNEL is not set +CONFIG_HAVE_GENERIC_DMA_COHERENT=y +CONFIG_RT_MUTEXES=y +CONFIG_BASE_SMALL=0 +CONFIG_MODULES=y +# CONFIG_MODULE_FORCE_LOAD is not set +CONFIG_MODULE_UNLOAD=y +# CONFIG_MODULE_FORCE_UNLOAD is not set +CONFIG_MODVERSIONS=y +CONFIG_MODULE_SRCVERSION_ALL=y +# CONFIG_MODULE_SIG is not set +CONFIG_STOP_MACHINE=y +CONFIG_BLOCK=y +CONFIG_LBDAF=y +# CONFIG_BLK_DEV_BSG is not set +# CONFIG_BLK_DEV_BSGLIB is not set +# CONFIG_BLK_DEV_INTEGRITY is not set +# CONFIG_BLK_CMDLINE_PARSER is not set + +# +# Partition Types +# +# CONFIG_PARTITION_ADVANCED is not set +CONFIG_MSDOS_PARTITION=y +CONFIG_EFI_PARTITION=y + +# +# IO Schedulers +# +CONFIG_IOSCHED_NOOP=y +CONFIG_IOSCHED_DEADLINE=y +CONFIG_IOSCHED_CFQ=y +# CONFIG_DEFAULT_DEADLINE is not set +CONFIG_DEFAULT_CFQ=y +# CONFIG_DEFAULT_NOOP is not set +CONFIG_DEFAULT_IOSCHED="cfq" +CONFIG_UNINLINE_SPIN_UNLOCK=y +CONFIG_ARCH_SUPPORTS_ATOMIC_RMW=y +CONFIG_RWSEM_SPIN_ON_OWNER=y +CONFIG_FREEZER=y + +# +# System Type +# +CONFIG_MMU=y +CONFIG_ARCH_MULTIPLATFORM=y +# CONFIG_ARCH_INTEGRATOR is not set +# CONFIG_ARCH_REALVIEW is not set +# CONFIG_ARCH_VERSATILE is not set +# CONFIG_ARCH_AT91 is not set +# CONFIG_ARCH_CLPS711X is not set +# CONFIG_ARCH_GEMINI is not set +# CONFIG_ARCH_EBSA110 is not set +# CONFIG_ARCH_EP93XX is not set +# CONFIG_ARCH_FOOTBRIDGE is not set +# CONFIG_ARCH_NETX is not set +# CONFIG_ARCH_IOP13XX is not set +# CONFIG_ARCH_IOP32X is not set +# CONFIG_ARCH_IOP33X is not set +# CONFIG_ARCH_IXP4XX is not set +# CONFIG_ARCH_DOVE is not set +# CONFIG_ARCH_KIRKWOOD is not set +# CONFIG_ARCH_MV78XX0 is not set +# CONFIG_ARCH_ORION5X is not set +# CONFIG_ARCH_MMP is not set +# CONFIG_ARCH_KS8695 is not set +# CONFIG_ARCH_W90X900 is not set +# CONFIG_ARCH_LPC32XX is not set +# CONFIG_ARCH_PXA is not set +# CONFIG_ARCH_MSM is not set +# CONFIG_ARCH_SHMOBILE_LEGACY is not set +# CONFIG_ARCH_RPC is not set +# CONFIG_ARCH_SA1100 is not set +# CONFIG_ARCH_S3C24XX is not set +# CONFIG_ARCH_S3C64XX is not set +# CONFIG_ARCH_S5P64X0 is not set +# CONFIG_ARCH_S5PC100 is not set +# CONFIG_ARCH_S5PV210 is not set +# CONFIG_ARCH_DAVINCI is not set +# CONFIG_ARCH_OMAP1 is not set + +# +# Multiple platform selection +# + +# +# CPU Core family selection +# +CONFIG_ARCH_MULTI_V6=y +CONFIG_ARCH_MULTI_V7=y +CONFIG_ARCH_MULTI_V6_V7=y +# CONFIG_ARCH_MULTI_CPU_AUTO is not set +# CONFIG_ARCH_VIRT is not set +# CONFIG_ARCH_MVEBU is not set +# CONFIG_ARCH_BCM is not set +# CONFIG_ARCH_BERLIN is not set +# CONFIG_ARCH_CNS3XXX is not set +# CONFIG_ARCH_HIGHBANK is not set +# CONFIG_ARCH_HI3xxx is not set +# CONFIG_ARCH_KEYSTONE is not set +CONFIG_ARCH_MXC=y +CONFIG_MXC_TZIC=y +CONFIG_MXC_AVIC=y +CONFIG_MXC_DEBUG_BOARD=y +CONFIG_HAVE_EPIT=y +# CONFIG_MXC_USE_EPIT is not set +CONFIG_ARCH_HAS_RNGA=y +CONFIG_HAVE_IMX_ANATOP=y +CONFIG_HAVE_IMX_GPC=y +CONFIG_HAVE_IMX_MMDC=y +CONFIG_HAVE_IMX_SRC=y +CONFIG_ARCH_MXC_IOMUX_V3=y +CONFIG_SOC_IMX31=y +CONFIG_SOC_IMX35=y +CONFIG_SOC_IMX5=y +CONFIG_SOC_IMX51=y + +# +# MX31 platforms: +# +CONFIG_MACH_MX31ADS=y +CONFIG_MACH_MX31LILLY=y +CONFIG_MACH_MX31LITE=y +CONFIG_MACH_PCM037=y +CONFIG_MACH_PCM037_EET=y +CONFIG_MACH_MX31_3DS=y +# CONFIG_MACH_MX31_3DS_MXC_NAND_USE_BBT is not set +CONFIG_MACH_MX31MOBOARD=y +CONFIG_MACH_QONG=y +CONFIG_MACH_ARMADILLO5X0=y +CONFIG_MACH_KZM_ARM11_01=y +CONFIG_MACH_BUG=y +CONFIG_MACH_IMX31_DT=y + +# +# MX35 platforms: +# +CONFIG_MACH_IMX35_DT=y +CONFIG_MACH_PCM043=y +CONFIG_MACH_MX35_3DS=y +# CONFIG_MACH_EUKREA_CPUIMX35SD is not set +CONFIG_MACH_VPR200=y + +# +# Device tree only +# +CONFIG_SOC_IMX50=y +CONFIG_MACH_IMX51_DT=y +CONFIG_SOC_IMX53=y +CONFIG_SOC_IMX6=y +CONFIG_SOC_IMX6Q=y +CONFIG_SOC_IMX6SL=y +# CONFIG_SOC_IMX6SX is not set +CONFIG_SOC_VF610=y +CONFIG_IMX_HAVE_PLATFORM_FEC=y +CONFIG_IMX_HAVE_PLATFORM_FLEXCAN=y +CONFIG_IMX_HAVE_PLATFORM_FSL_USB2_UDC=y +CONFIG_IMX_HAVE_PLATFORM_GPIO_KEYS=y +CONFIG_IMX_HAVE_PLATFORM_IMX2_WDT=y +CONFIG_IMX_HAVE_PLATFORM_IMX_FB=y +CONFIG_IMX_HAVE_PLATFORM_IMX_I2C=y +CONFIG_IMX_HAVE_PLATFORM_IMX_KEYPAD=y +CONFIG_IMX_HAVE_PLATFORM_IMX_SSI=y +CONFIG_IMX_HAVE_PLATFORM_IMX_UART=y +CONFIG_IMX_HAVE_PLATFORM_IPU_CORE=y +CONFIG_IMX_HAVE_PLATFORM_MXC_EHCI=y +CONFIG_IMX_HAVE_PLATFORM_MXC_MMC=y +CONFIG_IMX_HAVE_PLATFORM_MXC_NAND=y +CONFIG_IMX_HAVE_PLATFORM_MXC_RNGA=y +CONFIG_IMX_HAVE_PLATFORM_MXC_RTC=y +CONFIG_IMX_HAVE_PLATFORM_MXC_W1=y +CONFIG_IMX_HAVE_PLATFORM_SDHCI_ESDHC_IMX=y +CONFIG_IMX_HAVE_PLATFORM_SPI_IMX=y + +# +# TI OMAP/AM/DM/DRA Family +# +# CONFIG_ARCH_OMAP2 is not set +# CONFIG_ARCH_OMAP3 is not set +# CONFIG_ARCH_OMAP4 is not set +# CONFIG_SOC_OMAP5 is not set +# CONFIG_SOC_AM33XX is not set +# CONFIG_SOC_AM43XX is not set +# CONFIG_SOC_DRA7XX is not set +# CONFIG_ARCH_PICOXCELL is not set +# CONFIG_ARCH_QCOM is not set +# CONFIG_ARCH_ROCKCHIP is not set +# CONFIG_ARCH_SOCFPGA is not set +# CONFIG_PLAT_SPEAR is not set +# CONFIG_ARCH_STI is not set +# CONFIG_ARCH_EXYNOS is not set +# CONFIG_ARCH_SHMOBILE_MULTI is not set +# CONFIG_ARCH_SUNXI is not set +# CONFIG_ARCH_SIRF is not set +# CONFIG_ARCH_TEGRA is not set +# CONFIG_ARCH_U8500 is not set +# CONFIG_ARCH_VEXPRESS is not set +# CONFIG_ARCH_WM8750 is not set +# CONFIG_ARCH_WM8850 is not set +# CONFIG_ARCH_ZYNQ is not set + +# +# Processor Type +# +CONFIG_CPU_V6=y +CONFIG_CPU_V6K=y +CONFIG_CPU_V7=y +CONFIG_CPU_32v6=y +CONFIG_CPU_32v6K=y +CONFIG_CPU_32v7=y +CONFIG_CPU_ABRT_EV6=y +CONFIG_CPU_ABRT_EV7=y +CONFIG_CPU_PABRT_V6=y +CONFIG_CPU_PABRT_V7=y +CONFIG_CPU_CACHE_V6=y +CONFIG_CPU_CACHE_V7=y +CONFIG_CPU_CACHE_VIPT=y +CONFIG_CPU_COPY_V6=y +CONFIG_CPU_TLB_V6=y +CONFIG_CPU_TLB_V7=y +CONFIG_CPU_HAS_ASID=y +CONFIG_CPU_CP15=y +CONFIG_CPU_CP15_MMU=y + +# +# Processor Features +# +# CONFIG_ARCH_PHYS_ADDR_T_64BIT is not set +CONFIG_ARM_THUMB=y +# CONFIG_ARM_THUMBEE is not set +CONFIG_ARM_VIRT_EXT=y +CONFIG_SWP_EMULATE=y +# CONFIG_CPU_ICACHE_DISABLE is not set +# CONFIG_CPU_DCACHE_DISABLE is not set +# CONFIG_CPU_BPREDICT_DISABLE is not set +CONFIG_KUSER_HELPERS=y +CONFIG_DMA_CACHE_RWFO=y +CONFIG_OUTER_CACHE=y +CONFIG_OUTER_CACHE_SYNC=y +CONFIG_MIGHT_HAVE_CACHE_L2X0=y +CONFIG_CACHE_L2X0=y +CONFIG_PL310_ERRATA_588369=y +CONFIG_PL310_ERRATA_727915=y +# CONFIG_PL310_ERRATA_753970 is not set +CONFIG_PL310_ERRATA_769419=y +CONFIG_ARM_L1_CACHE_SHIFT_6=y +CONFIG_ARM_L1_CACHE_SHIFT=6 +CONFIG_ARM_DMA_MEM_BUFFERABLE=y +CONFIG_MULTI_IRQ_HANDLER=y +# CONFIG_ARM_ERRATA_326103 is not set +# CONFIG_ARM_ERRATA_411920 is not set +# CONFIG_ARM_ERRATA_430973 is not set +# CONFIG_ARM_ERRATA_643719 is not set +# CONFIG_ARM_ERRATA_720789 is not set +CONFIG_ARM_ERRATA_754322=y +# CONFIG_ARM_ERRATA_754327 is not set +# CONFIG_ARM_ERRATA_364296 is not set +CONFIG_ARM_ERRATA_764369=y +CONFIG_ARM_ERRATA_775420=y +# CONFIG_ARM_ERRATA_798181 is not set +# CONFIG_ARM_ERRATA_773022 is not set + +# +# Bus support +# +CONFIG_PCI=y +CONFIG_PCI_DOMAINS=y +CONFIG_PCI_SYSCALL=y +# CONFIG_PCI_MSI is not set +# CONFIG_PCI_DEBUG is not set +# CONFIG_PCI_REALLOC_ENABLE_AUTO is not set +# CONFIG_PCI_STUB is not set +# CONFIG_PCI_IOV is not set +# CONFIG_PCI_PRI is not set +# CONFIG_PCI_PASID is not set + +# +# PCI host controller drivers +# +CONFIG_PCIE_DW=y +CONFIG_PCI_IMX6=y +# CONFIG_PCI_HOST_GENERIC is not set +CONFIG_PCIEPORTBUS=y +CONFIG_PCIEAER=y +# CONFIG_PCIE_ECRC is not set +# CONFIG_PCIEAER_INJECT is not set +CONFIG_PCIEASPM=y +# CONFIG_PCIEASPM_DEBUG is not set +CONFIG_PCIEASPM_DEFAULT=y +# CONFIG_PCIEASPM_POWERSAVE is not set +# CONFIG_PCIEASPM_PERFORMANCE is not set +CONFIG_PCIE_PME=y +# CONFIG_PCCARD is not set + +# +# Kernel Features +# +CONFIG_HAVE_SMP=y +CONFIG_SMP=y +CONFIG_SMP_ON_UP=y +CONFIG_ARM_CPU_TOPOLOGY=y +# CONFIG_SCHED_MC is not set +# CONFIG_SCHED_SMT is not set +CONFIG_HAVE_ARM_SCU=y +# CONFIG_HAVE_ARM_ARCH_TIMER is not set +CONFIG_HAVE_ARM_TWD=y +# CONFIG_MCPM is not set +# CONFIG_BIG_LITTLE is not set +# CONFIG_VMSPLIT_3G is not set +CONFIG_VMSPLIT_2G=y +# CONFIG_VMSPLIT_1G is not set +CONFIG_PAGE_OFFSET=0x80000000 +CONFIG_NR_CPUS=4 +CONFIG_HOTPLUG_CPU=y +# CONFIG_ARM_PSCI is not set +CONFIG_ARCH_NR_GPIO=0 +# CONFIG_PREEMPT_NONE is not set +CONFIG_PREEMPT_VOLUNTARY=y +# CONFIG_PREEMPT is not set +CONFIG_HZ_FIXED=0 +CONFIG_HZ_100=y +# CONFIG_HZ_200 is not set +# CONFIG_HZ_250 is not set +# CONFIG_HZ_300 is not set +# CONFIG_HZ_500 is not set +# CONFIG_HZ_1000 is not set +CONFIG_HZ=100 +CONFIG_SCHED_HRTICK=y +CONFIG_AEABI=y +# CONFIG_OABI_COMPAT is not set +# CONFIG_ARCH_SPARSEMEM_DEFAULT is not set +# CONFIG_ARCH_SELECT_MEMORY_MODEL is not set +CONFIG_HAVE_ARCH_PFN_VALID=y +CONFIG_HIGHMEM=y +# CONFIG_HIGHPTE is not set +CONFIG_HW_PERF_EVENTS=y +CONFIG_ARCH_WANT_GENERAL_HUGETLB=y +CONFIG_FLATMEM=y +CONFIG_FLAT_NODE_MEM_MAP=y +CONFIG_HAVE_MEMBLOCK=y +CONFIG_NO_BOOTMEM=y +CONFIG_MEMORY_ISOLATION=y +# CONFIG_HAVE_BOOTMEM_INFO_NODE is not set +CONFIG_PAGEFLAGS_EXTENDED=y +CONFIG_SPLIT_PTLOCK_CPUS=4 +CONFIG_COMPACTION=y +CONFIG_MIGRATION=y +# CONFIG_PHYS_ADDR_T_64BIT is not set +CONFIG_ZONE_DMA_FLAG=0 +CONFIG_BOUNCE=y +# CONFIG_KSM is not set +CONFIG_DEFAULT_MMAP_MIN_ADDR=4096 +# CONFIG_CLEANCACHE is not set +# CONFIG_FRONTSWAP is not set +CONFIG_CMA=y +# CONFIG_CMA_DEBUG is not set +# CONFIG_ZBUD is not set +# CONFIG_ZSMALLOC is not set +CONFIG_FORCE_MAX_ZONEORDER=11 +CONFIG_ALIGNMENT_TRAP=y +# CONFIG_UACCESS_WITH_MEMCPY is not set +# CONFIG_SECCOMP is not set +CONFIG_SWIOTLB=y +CONFIG_IOMMU_HELPER=y + +# +# Boot options +# +CONFIG_USE_OF=y +CONFIG_ATAGS=y +# CONFIG_DEPRECATED_PARAM_STRUCT is not set +CONFIG_ZBOOT_ROM_TEXT=0 +CONFIG_ZBOOT_ROM_BSS=0 +# CONFIG_ARM_APPENDED_DTB is not set +CONFIG_CMDLINE="noinitrd console=ttymxc1,115200 init=/usr/bin/hello root=/dev/m" +# CONFIG_CMDLINE_FROM_BOOTLOADER is not set +# CONFIG_CMDLINE_EXTEND is not set +CONFIG_CMDLINE_FORCE=y +# CONFIG_KEXEC is not set +# CONFIG_CRASH_DUMP is not set +CONFIG_AUTO_ZRELADDR=y + +# +# CPU Power Management +# + +# +# CPU Frequency scaling +# +CONFIG_CPU_FREQ=y +CONFIG_CPU_FREQ_GOV_COMMON=y +CONFIG_CPU_FREQ_STAT=y +# CONFIG_CPU_FREQ_STAT_DETAILS is not set +# CONFIG_CPU_FREQ_DEFAULT_GOV_PERFORMANCE is not set +# CONFIG_CPU_FREQ_DEFAULT_GOV_POWERSAVE is not set +# CONFIG_CPU_FREQ_DEFAULT_GOV_USERSPACE is not set +CONFIG_CPU_FREQ_DEFAULT_GOV_ONDEMAND=y +# CONFIG_CPU_FREQ_DEFAULT_GOV_CONSERVATIVE is not set +CONFIG_CPU_FREQ_GOV_PERFORMANCE=y +# CONFIG_CPU_FREQ_GOV_POWERSAVE is not set +# CONFIG_CPU_FREQ_GOV_USERSPACE is not set +CONFIG_CPU_FREQ_GOV_ONDEMAND=y +# CONFIG_CPU_FREQ_GOV_CONSERVATIVE is not set +# CONFIG_GENERIC_CPUFREQ_CPU0 is not set + +# +# ARM CPU frequency scaling drivers +# +CONFIG_ARM_IMX6Q_CPUFREQ=y +# CONFIG_ARM_KIRKWOOD_CPUFREQ is not set + +# +# CPU Idle +# +# CONFIG_CPU_IDLE is not set +# CONFIG_ARCH_NEEDS_CPU_IDLE_COUPLED is not set + +# +# Floating point emulation +# + +# +# At least one emulation must be selected +# +CONFIG_VFP=y +CONFIG_VFPv3=y +CONFIG_NEON=y +# CONFIG_KERNEL_MODE_NEON is not set + +# +# Userspace binary formats +# +CONFIG_BINFMT_ELF=y +CONFIG_ARCH_BINFMT_ELF_RANDOMIZE_PIE=y +CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS=y +CONFIG_BINFMT_SCRIPT=y +# CONFIG_HAVE_AOUT is not set +CONFIG_BINFMT_MISC=m +CONFIG_COREDUMP=y + +# +# Power management options +# +CONFIG_SUSPEND=y +CONFIG_SUSPEND_FREEZER=y +# CONFIG_HIBERNATION is not set +CONFIG_PM_SLEEP=y +CONFIG_PM_SLEEP_SMP=y +# CONFIG_PM_AUTOSLEEP is not set +# CONFIG_PM_WAKELOCKS is not set +CONFIG_PM_RUNTIME=y +CONFIG_PM=y +CONFIG_PM_DEBUG=y +# CONFIG_PM_ADVANCED_DEBUG is not set +CONFIG_PM_TEST_SUSPEND=y +CONFIG_PM_SLEEP_DEBUG=y +# CONFIG_APM_EMULATION is not set +CONFIG_ARCH_HAS_OPP=y +CONFIG_PM_OPP=y +CONFIG_PM_CLK=y +# CONFIG_WQ_POWER_EFFICIENT_DEFAULT is not set +CONFIG_CPU_PM=y +CONFIG_ARCH_SUSPEND_POSSIBLE=y +CONFIG_ARM_CPU_SUSPEND=y +CONFIG_ARCH_HIBERNATION_POSSIBLE=y +CONFIG_NET=y + +# +# Networking options +# +CONFIG_PACKET=y +# CONFIG_PACKET_DIAG is not set +CONFIG_UNIX=y +# CONFIG_UNIX_DIAG is not set +CONFIG_XFRM=y +# CONFIG_XFRM_USER is not set +# CONFIG_XFRM_SUB_POLICY is not set +# CONFIG_XFRM_MIGRATE is not set +# CONFIG_XFRM_STATISTICS is not set +# CONFIG_NET_KEY is not set +CONFIG_INET=y +# CONFIG_IP_MULTICAST is not set +# CONFIG_IP_ADVANCED_ROUTER is not set +CONFIG_IP_PNP=y +CONFIG_IP_PNP_DHCP=y +# CONFIG_IP_PNP_BOOTP is not set +# CONFIG_IP_PNP_RARP is not set +# CONFIG_NET_IPIP is not set +# CONFIG_NET_IPGRE_DEMUX is not set +CONFIG_NET_IP_TUNNEL=y +# CONFIG_SYN_COOKIES is not set +# CONFIG_INET_AH is not set +# CONFIG_INET_ESP is not set +# CONFIG_INET_IPCOMP is not set +# CONFIG_INET_XFRM_TUNNEL is not set +CONFIG_INET_TUNNEL=y +# CONFIG_INET_XFRM_MODE_TRANSPORT is not set +# CONFIG_INET_XFRM_MODE_TUNNEL is not set +# CONFIG_INET_XFRM_MODE_BEET is not set +# CONFIG_INET_LRO is not set +CONFIG_INET_DIAG=y +CONFIG_INET_TCP_DIAG=y +# CONFIG_INET_UDP_DIAG is not set +# CONFIG_TCP_CONG_ADVANCED is not set +CONFIG_TCP_CONG_CUBIC=y +CONFIG_DEFAULT_TCP_CONG="cubic" +# CONFIG_TCP_MD5SIG is not set +CONFIG_IPV6=y +# CONFIG_IPV6_ROUTER_PREF is not set +# CONFIG_IPV6_OPTIMISTIC_DAD is not set +# CONFIG_INET6_AH is not set +# CONFIG_INET6_ESP is not set +# CONFIG_INET6_IPCOMP is not set +# CONFIG_IPV6_MIP6 is not set +# CONFIG_INET6_XFRM_TUNNEL is not set +# CONFIG_INET6_TUNNEL is not set +CONFIG_INET6_XFRM_MODE_TRANSPORT=y +CONFIG_INET6_XFRM_MODE_TUNNEL=y +CONFIG_INET6_XFRM_MODE_BEET=y +# CONFIG_INET6_XFRM_MODE_ROUTEOPTIMIZATION is not set +# CONFIG_IPV6_VTI is not set +CONFIG_IPV6_SIT=y +# CONFIG_IPV6_SIT_6RD is not set +CONFIG_IPV6_NDISC_NODETYPE=y +# CONFIG_IPV6_TUNNEL is not set +# CONFIG_IPV6_GRE is not set +# CONFIG_IPV6_MULTIPLE_TABLES is not set +# CONFIG_IPV6_MROUTE is not set +# CONFIG_NETWORK_SECMARK is not set +CONFIG_NET_PTP_CLASSIFY=y +# CONFIG_NETWORK_PHY_TIMESTAMPING is not set +CONFIG_NETFILTER=y +# CONFIG_NETFILTER_DEBUG is not set +CONFIG_NETFILTER_ADVANCED=y + +# +# Core Netfilter Configuration +# +# CONFIG_NETFILTER_NETLINK_ACCT is not set +# CONFIG_NETFILTER_NETLINK_QUEUE is not set +# CONFIG_NETFILTER_NETLINK_LOG is not set +# CONFIG_NF_CONNTRACK is not set +# CONFIG_NF_TABLES is not set +# CONFIG_NETFILTER_XTABLES is not set +# CONFIG_IP_SET is not set +# CONFIG_IP_VS is not set + +# +# IP: Netfilter Configuration +# +# CONFIG_NF_DEFRAG_IPV4 is not set +# CONFIG_IP_NF_IPTABLES is not set +# CONFIG_IP_NF_ARPTABLES is not set + +# +# IPv6: Netfilter Configuration +# +# CONFIG_NF_DEFRAG_IPV6 is not set +# CONFIG_IP6_NF_IPTABLES is not set +# CONFIG_IP_DCCP is not set +# CONFIG_IP_SCTP is not set +# CONFIG_RDS is not set +# CONFIG_TIPC is not set +# CONFIG_ATM is not set +# CONFIG_L2TP is not set +# CONFIG_BRIDGE is not set +CONFIG_HAVE_NET_DSA=y +# CONFIG_VLAN_8021Q is not set +# CONFIG_DECNET is not set +# CONFIG_LLC2 is not set +# CONFIG_IPX is not set +# CONFIG_ATALK is not set +# CONFIG_X25 is not set +# CONFIG_LAPB is not set +# CONFIG_PHONET is not set +# CONFIG_IEEE802154 is not set +# CONFIG_NET_SCHED is not set +# CONFIG_DCB is not set +CONFIG_DNS_RESOLVER=y +# CONFIG_BATMAN_ADV is not set +# CONFIG_OPENVSWITCH is not set +# CONFIG_VSOCKETS is not set +# CONFIG_NETLINK_MMAP is not set +# CONFIG_NETLINK_DIAG is not set +# CONFIG_NET_MPLS_GSO is not set +# CONFIG_HSR is not set +CONFIG_RPS=y +CONFIG_RFS_ACCEL=y +CONFIG_XPS=y +# CONFIG_CGROUP_NET_PRIO is not set +# CONFIG_CGROUP_NET_CLASSID is not set +CONFIG_NET_RX_BUSY_POLL=y +CONFIG_BQL=y +# CONFIG_BPF_JIT is not set +CONFIG_NET_FLOW_LIMIT=y + +# +# Network testing +# +# CONFIG_NET_PKTGEN is not set +# CONFIG_HAMRADIO is not set +# CONFIG_CAN is not set +# CONFIG_IRDA is not set +# CONFIG_BT is not set +# CONFIG_AF_RXRPC is not set +CONFIG_WIRELESS=y +CONFIG_CFG80211=y +# CONFIG_NL80211_TESTMODE is not set +# CONFIG_CFG80211_DEVELOPER_WARNINGS is not set +# CONFIG_CFG80211_REG_DEBUG is not set +# CONFIG_CFG80211_CERTIFICATION_ONUS is not set +CONFIG_CFG80211_DEFAULT_PS=y +# CONFIG_CFG80211_DEBUGFS is not set +# CONFIG_CFG80211_INTERNAL_REGDB is not set +# CONFIG_CFG80211_WEXT is not set +# CONFIG_LIB80211 is not set +CONFIG_MAC80211=y +CONFIG_MAC80211_HAS_RC=y +# CONFIG_MAC80211_RC_PID is not set +CONFIG_MAC80211_RC_MINSTREL=y +CONFIG_MAC80211_RC_MINSTREL_HT=y +CONFIG_MAC80211_RC_DEFAULT_MINSTREL=y +CONFIG_MAC80211_RC_DEFAULT="minstrel_ht" +# CONFIG_MAC80211_MESH is not set +# CONFIG_MAC80211_LEDS is not set +# CONFIG_MAC80211_DEBUGFS is not set +# CONFIG_MAC80211_MESSAGE_TRACING is not set +# CONFIG_MAC80211_DEBUG_MENU is not set +# CONFIG_WIMAX is not set +CONFIG_RFKILL=y +CONFIG_RFKILL_LEDS=y +CONFIG_RFKILL_INPUT=y +# CONFIG_RFKILL_REGULATOR is not set +# CONFIG_RFKILL_GPIO is not set +# CONFIG_NET_9P is not set +# CONFIG_CAIF is not set +# CONFIG_CEPH_LIB is not set +# CONFIG_NFC is not set +CONFIG_HAVE_BPF_JIT=y + +# +# Device Drivers +# + +# +# Generic Driver Options +# +CONFIG_UEVENT_HELPER=y +CONFIG_UEVENT_HELPER_PATH="" +CONFIG_DEVTMPFS=y +CONFIG_DEVTMPFS_MOUNT=y +# CONFIG_STANDALONE is not set +CONFIG_PREVENT_FIRMWARE_BUILD=y +CONFIG_FW_LOADER=y +CONFIG_FIRMWARE_IN_KERNEL=y +CONFIG_EXTRA_FIRMWARE="" +CONFIG_FW_LOADER_USER_HELPER=y +# CONFIG_DEBUG_DRIVER is not set +# CONFIG_DEBUG_DEVRES is not set +# CONFIG_SYS_HYPERVISOR is not set +# CONFIG_GENERIC_CPU_DEVICES is not set +CONFIG_SOC_BUS=y +CONFIG_REGMAP=y +CONFIG_REGMAP_I2C=y +CONFIG_REGMAP_SPI=y +CONFIG_REGMAP_MMIO=y +CONFIG_REGMAP_IRQ=y +CONFIG_DMA_SHARED_BUFFER=y +CONFIG_DMA_CMA=y + +# +# Default contiguous memory area size: +# +CONFIG_CMA_SIZE_MBYTES=16 +CONFIG_CMA_SIZE_SEL_MBYTES=y +# CONFIG_CMA_SIZE_SEL_PERCENTAGE is not set +# CONFIG_CMA_SIZE_SEL_MIN is not set +# CONFIG_CMA_SIZE_SEL_MAX is not set +CONFIG_CMA_ALIGNMENT=8 +CONFIG_CMA_AREAS=7 + +# +# Bus devices +# +# CONFIG_BRCMSTB_GISB_ARB is not set +CONFIG_IMX_WEIM=y +# CONFIG_ARM_CCI is not set +# CONFIG_VEXPRESS_CONFIG is not set +CONFIG_CONNECTOR=y +CONFIG_PROC_EVENTS=y +CONFIG_MTD=y +# CONFIG_MTD_TESTS is not set +# CONFIG_MTD_REDBOOT_PARTS is not set +CONFIG_MTD_CMDLINE_PARTS=y +# CONFIG_MTD_AFS_PARTS is not set +CONFIG_MTD_OF_PARTS=y +# CONFIG_MTD_AR7_PARTS is not set + +# +# User Modules And Translation Layers +# +CONFIG_MTD_BLKDEVS=y +CONFIG_MTD_BLOCK=y +# CONFIG_FTL is not set +# CONFIG_NFTL is not set +# CONFIG_INFTL is not set +# CONFIG_RFD_FTL is not set +# CONFIG_SSFDC is not set +# CONFIG_SM_FTL is not set +# CONFIG_MTD_OOPS is not set +# CONFIG_MTD_SWAP is not set + +# +# RAM/ROM/Flash chip drivers +# +CONFIG_MTD_CFI=y +CONFIG_MTD_JEDECPROBE=y +CONFIG_MTD_GEN_PROBE=y +# CONFIG_MTD_CFI_ADV_OPTIONS is not set +CONFIG_MTD_MAP_BANK_WIDTH_1=y +CONFIG_MTD_MAP_BANK_WIDTH_2=y +CONFIG_MTD_MAP_BANK_WIDTH_4=y +# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set +# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set +# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set +CONFIG_MTD_CFI_I1=y +CONFIG_MTD_CFI_I2=y +# CONFIG_MTD_CFI_I4 is not set +# CONFIG_MTD_CFI_I8 is not set +CONFIG_MTD_CFI_INTELEXT=y +CONFIG_MTD_CFI_AMDSTD=y +CONFIG_MTD_CFI_STAA=y +CONFIG_MTD_CFI_UTIL=y +# CONFIG_MTD_RAM is not set +# CONFIG_MTD_ROM is not set +# CONFIG_MTD_ABSENT is not set + +# +# Mapping drivers for chip access +# +# CONFIG_MTD_COMPLEX_MAPPINGS is not set +# CONFIG_MTD_PHYSMAP is not set +CONFIG_MTD_PHYSMAP_OF=y +# CONFIG_MTD_IMPA7 is not set +# CONFIG_MTD_INTEL_VR_NOR is not set +# CONFIG_MTD_PLATRAM is not set + +# +# Self-contained MTD device drivers +# +# CONFIG_MTD_PMC551 is not set +CONFIG_MTD_DATAFLASH=y +# CONFIG_MTD_DATAFLASH_WRITE_VERIFY is not set +# CONFIG_MTD_DATAFLASH_OTP is not set +CONFIG_MTD_M25P80=y +CONFIG_MTD_SST25L=y +# CONFIG_MTD_SLRAM is not set +# CONFIG_MTD_PHRAM is not set +# CONFIG_MTD_MTDRAM is not set +# CONFIG_MTD_BLOCK2MTD is not set + +# +# Disk-On-Chip Device Drivers +# +# CONFIG_MTD_DOCG3 is not set +CONFIG_MTD_NAND_ECC=y +# CONFIG_MTD_NAND_ECC_SMC is not set +CONFIG_MTD_NAND=y +# CONFIG_MTD_NAND_ECC_BCH is not set +# CONFIG_MTD_SM_COMMON is not set +# CONFIG_MTD_NAND_DENALI is not set +# CONFIG_MTD_NAND_GPIO is not set +CONFIG_MTD_NAND_IDS=y +# CONFIG_MTD_NAND_RICOH is not set +# CONFIG_MTD_NAND_DISKONCHIP is not set +# CONFIG_MTD_NAND_DOCG4 is not set +# CONFIG_MTD_NAND_CAFE is not set +# CONFIG_MTD_NAND_NANDSIM is not set +CONFIG_MTD_NAND_GPMI_NAND=y +# CONFIG_MTD_NAND_PLATFORM is not set +CONFIG_MTD_NAND_MXC=y +# CONFIG_MTD_ONENAND is not set + +# +# LPDDR & LPDDR2 PCM memory drivers +# +# CONFIG_MTD_LPDDR is not set +# CONFIG_MTD_LPDDR2_NVM is not set +CONFIG_MTD_SPI_NOR=y +# CONFIG_SPI_FSL_QUADSPI is not set +CONFIG_MTD_UBI=y +CONFIG_MTD_UBI_WL_THRESHOLD=4096 +CONFIG_MTD_UBI_BEB_LIMIT=20 +# CONFIG_MTD_UBI_FASTMAP is not set +# CONFIG_MTD_UBI_GLUEBI is not set +# CONFIG_MTD_UBI_BLOCK is not set +CONFIG_DTC=y +CONFIG_OF=y + +# +# Device Tree and Open Firmware support +# +# CONFIG_OF_SELFTEST is not set +CONFIG_OF_FLATTREE=y +CONFIG_OF_EARLY_FLATTREE=y +CONFIG_OF_ADDRESS=y +CONFIG_OF_ADDRESS_PCI=y +CONFIG_OF_IRQ=y +CONFIG_OF_NET=y +CONFIG_OF_MDIO=y +CONFIG_OF_PCI=y +CONFIG_OF_PCI_IRQ=y +CONFIG_OF_MTD=y +CONFIG_OF_RESERVED_MEM=y +CONFIG_ARCH_MIGHT_HAVE_PC_PARPORT=y +# CONFIG_PARPORT is not set +CONFIG_BLK_DEV=y +# CONFIG_BLK_DEV_NULL_BLK is not set +# CONFIG_BLK_DEV_PCIESSD_MTIP32XX is not set +# CONFIG_BLK_CPQ_CISS_DA is not set +# CONFIG_BLK_DEV_DAC960 is not set +# CONFIG_BLK_DEV_UMEM is not set +# CONFIG_BLK_DEV_COW_COMMON is not set +CONFIG_BLK_DEV_LOOP=y +CONFIG_BLK_DEV_LOOP_MIN_COUNT=8 +# CONFIG_BLK_DEV_CRYPTOLOOP is not set +# CONFIG_BLK_DEV_DRBD is not set +# CONFIG_BLK_DEV_NBD is not set +# CONFIG_BLK_DEV_NVME is not set +# CONFIG_BLK_DEV_SX8 is not set +CONFIG_BLK_DEV_RAM=y +CONFIG_BLK_DEV_RAM_COUNT=16 +CONFIG_BLK_DEV_RAM_SIZE=65536 +# CONFIG_BLK_DEV_XIP is not set +# CONFIG_CDROM_PKTCDVD is not set +# CONFIG_ATA_OVER_ETH is not set +# CONFIG_MG_DISK is not set +# CONFIG_BLK_DEV_RBD is not set +# CONFIG_BLK_DEV_RSXX is not set + +# +# Misc devices +# +# CONFIG_SENSORS_LIS3LV02D is not set +# CONFIG_AD525X_DPOT is not set +# CONFIG_DUMMY_IRQ is not set +# CONFIG_PHANTOM is not set +# CONFIG_SGI_IOC4 is not set +# CONFIG_TIFM_CORE is not set +# CONFIG_ICS932S401 is not set +# CONFIG_ENCLOSURE_SERVICES is not set +# CONFIG_HP_ILO is not set +# CONFIG_APDS9802ALS is not set +# CONFIG_ISL29003 is not set +# CONFIG_ISL29020 is not set +# CONFIG_SENSORS_TSL2550 is not set +# CONFIG_SENSORS_BH1780 is not set +# CONFIG_SENSORS_BH1770 is not set +# CONFIG_SENSORS_APDS990X is not set +# CONFIG_HMC6352 is not set +# CONFIG_DS1682 is not set +# CONFIG_TI_DAC7512 is not set +# CONFIG_BMP085_I2C is not set +# CONFIG_BMP085_SPI is not set +# CONFIG_USB_SWITCH_FSA9480 is not set +# CONFIG_LATTICE_ECP3_CONFIG is not set +CONFIG_SRAM=y +# CONFIG_C2PORT is not set + +# +# EEPROM support +# +CONFIG_EEPROM_AT24=y +CONFIG_EEPROM_AT25=y +# CONFIG_EEPROM_LEGACY is not set +# CONFIG_EEPROM_MAX6875 is not set +# CONFIG_EEPROM_93CX6 is not set +# CONFIG_EEPROM_93XX46 is not set +# CONFIG_CB710_CORE is not set + +# +# Texas Instruments shared transport line discipline +# +# CONFIG_TI_ST is not set +# CONFIG_SENSORS_LIS3_SPI is not set +# CONFIG_SENSORS_LIS3_I2C is not set + +# +# Altera FPGA firmware download module +# +# CONFIG_ALTERA_STAPL is not set + +# +# Intel MIC Host Driver +# + +# +# Intel MIC Card Driver +# +# CONFIG_ECHO is not set +CONFIG_HAVE_IDE=y +# CONFIG_IDE is not set + +# +# SCSI device support +# +CONFIG_SCSI_MOD=y +# CONFIG_RAID_ATTRS is not set +CONFIG_SCSI=y +CONFIG_SCSI_DMA=y +# CONFIG_SCSI_TGT is not set +# CONFIG_SCSI_NETLINK is not set +# CONFIG_SCSI_PROC_FS is not set + +# +# SCSI support type (disk, tape, CD-ROM) +# +CONFIG_BLK_DEV_SD=y +# CONFIG_CHR_DEV_ST is not set +# CONFIG_CHR_DEV_OSST is not set +# CONFIG_BLK_DEV_SR is not set +# CONFIG_CHR_DEV_SG is not set +# CONFIG_CHR_DEV_SCH is not set +CONFIG_SCSI_MULTI_LUN=y +CONFIG_SCSI_CONSTANTS=y +CONFIG_SCSI_LOGGING=y +CONFIG_SCSI_SCAN_ASYNC=y + +# +# SCSI Transports +# +# CONFIG_SCSI_SPI_ATTRS is not set +# CONFIG_SCSI_FC_ATTRS is not set +# CONFIG_SCSI_ISCSI_ATTRS is not set +# CONFIG_SCSI_SAS_ATTRS is not set +# CONFIG_SCSI_SAS_LIBSAS is not set +# CONFIG_SCSI_SRP_ATTRS is not set +# CONFIG_SCSI_LOWLEVEL is not set +# CONFIG_SCSI_DH is not set +# CONFIG_SCSI_OSD_INITIATOR is not set +CONFIG_ATA=y +# CONFIG_ATA_NONSTANDARD is not set +CONFIG_ATA_VERBOSE_ERROR=y +CONFIG_SATA_PMP=y + +# +# Controllers with non-SFF native interface +# +# CONFIG_SATA_AHCI is not set +CONFIG_SATA_AHCI_PLATFORM=y +CONFIG_AHCI_IMX=y +# CONFIG_SATA_INIC162X is not set +# CONFIG_SATA_ACARD_AHCI is not set +# CONFIG_SATA_SIL24 is not set +CONFIG_ATA_SFF=y + +# +# SFF controllers with custom DMA interface +# +# CONFIG_PDC_ADMA is not set +# CONFIG_SATA_QSTOR is not set +# CONFIG_SATA_SX4 is not set +CONFIG_ATA_BMDMA=y + +# +# SATA SFF controllers with BMDMA +# +# CONFIG_ATA_PIIX is not set +# CONFIG_SATA_MV is not set +# CONFIG_SATA_NV is not set +# CONFIG_SATA_PROMISE is not set +# CONFIG_SATA_SIL is not set +# CONFIG_SATA_SIS is not set +# CONFIG_SATA_SVW is not set +# CONFIG_SATA_ULI is not set +# CONFIG_SATA_VIA is not set +# CONFIG_SATA_VITESSE is not set + +# +# PATA SFF controllers with BMDMA +# +# CONFIG_PATA_ALI is not set +# CONFIG_PATA_AMD is not set +# CONFIG_PATA_ARTOP is not set +# CONFIG_PATA_ATIIXP is not set +# CONFIG_PATA_ATP867X is not set +# CONFIG_PATA_CMD64X is not set +# CONFIG_PATA_CYPRESS is not set +# CONFIG_PATA_EFAR is not set +# CONFIG_PATA_HPT366 is not set +# CONFIG_PATA_HPT37X is not set +# CONFIG_PATA_HPT3X2N is not set +# CONFIG_PATA_HPT3X3 is not set +CONFIG_PATA_IMX=y +# CONFIG_PATA_IT8213 is not set +# CONFIG_PATA_IT821X is not set +# CONFIG_PATA_JMICRON is not set +# CONFIG_PATA_MARVELL is not set +# CONFIG_PATA_NETCELL is not set +# CONFIG_PATA_NINJA32 is not set +# CONFIG_PATA_NS87415 is not set +# CONFIG_PATA_OLDPIIX is not set +# CONFIG_PATA_OPTIDMA is not set +# CONFIG_PATA_PDC2027X is not set +# CONFIG_PATA_PDC_OLD is not set +# CONFIG_PATA_RADISYS is not set +# CONFIG_PATA_RDC is not set +# CONFIG_PATA_SCH is not set +# CONFIG_PATA_SERVERWORKS is not set +# CONFIG_PATA_SIL680 is not set +# CONFIG_PATA_SIS is not set +# CONFIG_PATA_TOSHIBA is not set +# CONFIG_PATA_TRIFLEX is not set +# CONFIG_PATA_VIA is not set +# CONFIG_PATA_WINBOND is not set + +# +# PIO-only SFF controllers +# +# CONFIG_PATA_CMD640_PCI is not set +# CONFIG_PATA_MPIIX is not set +# CONFIG_PATA_NS87410 is not set +# CONFIG_PATA_OPTI is not set +# CONFIG_PATA_PLATFORM is not set +# CONFIG_PATA_RZ1000 is not set + +# +# Generic fallback / legacy drivers +# +# CONFIG_ATA_GENERIC is not set +# CONFIG_PATA_LEGACY is not set +# CONFIG_MD is not set +# CONFIG_TARGET_CORE is not set +# CONFIG_FUSION is not set + +# +# IEEE 1394 (FireWire) support +# +# CONFIG_FIREWIRE is not set +# CONFIG_FIREWIRE_NOSY is not set +# CONFIG_I2O is not set +CONFIG_NETDEVICES=y +CONFIG_MII=y +CONFIG_NET_CORE=y +# CONFIG_BONDING is not set +# CONFIG_DUMMY is not set +# CONFIG_EQUALIZER is not set +# CONFIG_NET_FC is not set +# CONFIG_NET_TEAM is not set +# CONFIG_MACVLAN is not set +# CONFIG_VXLAN is not set +# CONFIG_NETCONSOLE is not set +# CONFIG_NETPOLL is not set +# CONFIG_NET_POLL_CONTROLLER is not set +# CONFIG_TUN is not set +# CONFIG_VETH is not set +# CONFIG_NLMON is not set +# CONFIG_ARCNET is not set + +# +# CAIF transport drivers +# + +# +# Distributed Switch Architecture drivers +# +# CONFIG_NET_DSA_MV88E6XXX is not set +# CONFIG_NET_DSA_MV88E6060 is not set +# CONFIG_NET_DSA_MV88E6XXX_NEED_PPU is not set +# CONFIG_NET_DSA_MV88E6131 is not set +# CONFIG_NET_DSA_MV88E6123_61_65 is not set +CONFIG_ETHERNET=y +CONFIG_NET_VENDOR_3COM=y +# CONFIG_VORTEX is not set +# CONFIG_TYPHOON is not set +CONFIG_NET_VENDOR_ADAPTEC=y +# CONFIG_ADAPTEC_STARFIRE is not set +CONFIG_NET_VENDOR_ALTEON=y +# CONFIG_ACENIC is not set +# CONFIG_ALTERA_TSE is not set +CONFIG_NET_VENDOR_AMD=y +# CONFIG_AMD8111_ETH is not set +# CONFIG_PCNET32 is not set +# CONFIG_AMD_XGBE is not set +CONFIG_NET_VENDOR_ARC=y +# CONFIG_ARC_EMAC is not set +CONFIG_NET_VENDOR_ATHEROS=y +# CONFIG_ATL2 is not set +# CONFIG_ATL1 is not set +# CONFIG_ATL1E is not set +# CONFIG_ATL1C is not set +# CONFIG_ALX is not set +CONFIG_NET_CADENCE=y +# CONFIG_NET_VENDOR_BROADCOM is not set +CONFIG_NET_VENDOR_BROCADE=y +# CONFIG_BNA is not set +# CONFIG_NET_CALXEDA_XGMAC is not set +CONFIG_NET_VENDOR_CHELSIO=y +# CONFIG_CHELSIO_T1 is not set +# CONFIG_CHELSIO_T3 is not set +# CONFIG_CHELSIO_T4 is not set +# CONFIG_CHELSIO_T4VF is not set +CONFIG_NET_VENDOR_CIRRUS=y +CONFIG_CS89x0=y +CONFIG_CS89x0_PLATFORM=y +CONFIG_NET_VENDOR_CISCO=y +# CONFIG_ENIC is not set +# CONFIG_DM9000 is not set +# CONFIG_DNET is not set +CONFIG_NET_VENDOR_DEC=y +# CONFIG_NET_TULIP is not set +CONFIG_NET_VENDOR_DLINK=y +# CONFIG_DL2K is not set +# CONFIG_SUNDANCE is not set +CONFIG_NET_VENDOR_EMULEX=y +# CONFIG_BE2NET is not set +CONFIG_NET_VENDOR_EXAR=y +# CONFIG_S2IO is not set +# CONFIG_VXGE is not set +# CONFIG_NET_VENDOR_FARADAY is not set +CONFIG_NET_VENDOR_FREESCALE=y +CONFIG_FEC=y +CONFIG_NET_VENDOR_HISILICON=y +# CONFIG_HIX5HD2_GMAC is not set +CONFIG_NET_VENDOR_HP=y +# CONFIG_HP100 is not set +# CONFIG_NET_VENDOR_INTEL is not set +# CONFIG_IP1000 is not set +# CONFIG_JME is not set +# CONFIG_NET_VENDOR_MARVELL is not set +CONFIG_NET_VENDOR_MELLANOX=y +# CONFIG_MLX4_EN is not set +# CONFIG_MLX4_CORE is not set +# CONFIG_MLX5_CORE is not set +# CONFIG_NET_VENDOR_MICREL is not set +# CONFIG_NET_VENDOR_MICROCHIP is not set +CONFIG_NET_VENDOR_MYRI=y +# CONFIG_MYRI10GE is not set +# CONFIG_FEALNX is not set +# CONFIG_NET_VENDOR_NATSEMI is not set +CONFIG_NET_VENDOR_NVIDIA=y +# CONFIG_FORCEDETH is not set +CONFIG_NET_VENDOR_OKI=y +# CONFIG_ETHOC is not set +CONFIG_NET_PACKET_ENGINE=y +# CONFIG_HAMACHI is not set +# CONFIG_YELLOWFIN is not set +CONFIG_NET_VENDOR_QLOGIC=y +# CONFIG_QLA3XXX is not set +# CONFIG_QLCNIC is not set +# CONFIG_QLGE is not set +# CONFIG_NETXEN_NIC is not set +CONFIG_NET_VENDOR_REALTEK=y +# CONFIG_8139CP is not set +# CONFIG_8139TOO is not set +# CONFIG_R8169 is not set +# CONFIG_SH_ETH is not set +CONFIG_NET_VENDOR_RDC=y +# CONFIG_R6040 is not set +CONFIG_NET_VENDOR_SAMSUNG=y +# CONFIG_SXGBE_ETH is not set +# CONFIG_NET_VENDOR_SEEQ is not set +CONFIG_NET_VENDOR_SILAN=y +# CONFIG_SC92031 is not set +CONFIG_NET_VENDOR_SIS=y +# CONFIG_SIS900 is not set +# CONFIG_SIS190 is not set +# CONFIG_SFC is not set +CONFIG_NET_VENDOR_SMSC=y +CONFIG_SMC91X=y +# CONFIG_EPIC100 is not set +CONFIG_SMC911X=y +CONFIG_SMSC911X=y +# CONFIG_SMSC911X_ARCH_HOOKS is not set +# CONFIG_SMSC9420 is not set +# CONFIG_NET_VENDOR_STMICRO is not set +CONFIG_NET_VENDOR_SUN=y +# CONFIG_HAPPYMEAL is not set +# CONFIG_SUNGEM is not set +# CONFIG_CASSINI is not set +# CONFIG_NIU is not set +CONFIG_NET_VENDOR_TEHUTI=y +# CONFIG_TEHUTI is not set +CONFIG_NET_VENDOR_TI=y +# CONFIG_TLAN is not set +CONFIG_NET_VENDOR_VIA=y +# CONFIG_VIA_RHINE is not set +# CONFIG_VIA_VELOCITY is not set +CONFIG_NET_VENDOR_WIZNET=y +# CONFIG_WIZNET_W5100 is not set +# CONFIG_WIZNET_W5300 is not set +# CONFIG_FDDI is not set +# CONFIG_HIPPI is not set +CONFIG_PHYLIB=y + +# +# MII PHY device drivers +# +CONFIG_AT803X_PHY=y +# CONFIG_AMD_PHY is not set +# CONFIG_AMD_XGBE_PHY is not set +# CONFIG_MARVELL_PHY is not set +# CONFIG_DAVICOM_PHY is not set +# CONFIG_QSEMI_PHY is not set +# CONFIG_LXT_PHY is not set +# CONFIG_CICADA_PHY is not set +# CONFIG_VITESSE_PHY is not set +# CONFIG_SMSC_PHY is not set +# CONFIG_BROADCOM_PHY is not set +# CONFIG_BCM7XXX_PHY is not set +# CONFIG_BCM87XX_PHY is not set +# CONFIG_ICPLUS_PHY is not set +# CONFIG_REALTEK_PHY is not set +# CONFIG_NATIONAL_PHY is not set +# CONFIG_STE10XP is not set +# CONFIG_LSI_ET1011C_PHY is not set +# CONFIG_MICREL_PHY is not set +# CONFIG_FIXED_PHY is not set +# CONFIG_MDIO_BITBANG is not set +# CONFIG_MDIO_BUS_MUX_GPIO is not set +# CONFIG_MDIO_BUS_MUX_MMIOREG is not set +# CONFIG_MICREL_KS8995MA is not set +# CONFIG_PPP is not set +# CONFIG_SLIP is not set + +# +# USB Network Adapters +# +# CONFIG_USB_CATC is not set +# CONFIG_USB_KAWETH is not set +# CONFIG_USB_PEGASUS is not set +# CONFIG_USB_RTL8150 is not set +# CONFIG_USB_RTL8152 is not set +# CONFIG_USB_USBNET is not set +# CONFIG_USB_HSO is not set +# CONFIG_USB_IPHETH is not set +CONFIG_WLAN=y +# CONFIG_LIBERTAS_THINFIRM is not set +# CONFIG_ATMEL is not set +# CONFIG_AT76C50X_USB is not set +# CONFIG_PRISM54 is not set +# CONFIG_USB_ZD1201 is not set +# CONFIG_USB_NET_RNDIS_WLAN is not set +# CONFIG_RTL8180 is not set +# CONFIG_RTL8187 is not set +# CONFIG_ADM8211 is not set +# CONFIG_MAC80211_HWSIM is not set +# CONFIG_MWL8K is not set +# CONFIG_ATH_CARDS is not set +# CONFIG_B43 is not set +# CONFIG_B43LEGACY is not set +CONFIG_BRCMUTIL=m +# CONFIG_BRCMSMAC is not set +CONFIG_BRCMFMAC=m +CONFIG_BRCMFMAC_SDIO=y +# CONFIG_BRCMFMAC_USB is not set +# CONFIG_BRCM_TRACING is not set +# CONFIG_BRCMDBG is not set +# CONFIG_HOSTAP is not set +# CONFIG_IPW2100 is not set +# CONFIG_IWLWIFI is not set +# CONFIG_IWL4965 is not set +# CONFIG_IWL3945 is not set +# CONFIG_LIBERTAS is not set +# CONFIG_P54_COMMON is not set +# CONFIG_RT2X00 is not set +CONFIG_RTL_CARDS=y +# CONFIG_RTL8192CE is not set +# CONFIG_RTL8192SE is not set +# CONFIG_RTL8192DE is not set +# CONFIG_RTL8723AE is not set +# CONFIG_RTL8723BE is not set +# CONFIG_RTL8188EE is not set +# CONFIG_RTL8192CU is not set +# CONFIG_WL_TI is not set +# CONFIG_ZD1211RW is not set +# CONFIG_MWIFIEX is not set +# CONFIG_CW1200 is not set +# CONFIG_RSI_91X is not set + +# +# Enable WiMAX (Networking options) to see the WiMAX drivers +# +# CONFIG_WAN is not set +# CONFIG_VMXNET3 is not set +# CONFIG_ISDN is not set + +# +# Input device support +# +CONFIG_INPUT=y +# CONFIG_INPUT_FF_MEMLESS is not set +CONFIG_INPUT_POLLDEV=y +# CONFIG_INPUT_SPARSEKMAP is not set +CONFIG_INPUT_MATRIXKMAP=y + +# +# Userland interfaces +# +CONFIG_INPUT_MOUSEDEV=y +# CONFIG_INPUT_MOUSEDEV_PSAUX is not set +CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024 +CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768 +# CONFIG_INPUT_JOYDEV is not set +CONFIG_INPUT_EVDEV=y +CONFIG_INPUT_EVBUG=m + +# +# Input Device Drivers +# +CONFIG_INPUT_KEYBOARD=y +# CONFIG_KEYBOARD_ADP5588 is not set +# CONFIG_KEYBOARD_ADP5589 is not set +CONFIG_KEYBOARD_ATKBD=y +# CONFIG_KEYBOARD_QT1070 is not set +# CONFIG_KEYBOARD_QT2160 is not set +# CONFIG_KEYBOARD_LKKBD is not set +CONFIG_KEYBOARD_GPIO=y +# CONFIG_KEYBOARD_GPIO_POLLED is not set +# CONFIG_KEYBOARD_TCA6416 is not set +# CONFIG_KEYBOARD_TCA8418 is not set +# CONFIG_KEYBOARD_MATRIX is not set +# CONFIG_KEYBOARD_LM8323 is not set +# CONFIG_KEYBOARD_LM8333 is not set +# CONFIG_KEYBOARD_MAX7359 is not set +# CONFIG_KEYBOARD_MCS is not set +# CONFIG_KEYBOARD_MPR121 is not set +CONFIG_KEYBOARD_IMX=y +# CONFIG_KEYBOARD_NEWTON is not set +# CONFIG_KEYBOARD_OPENCORES is not set +# CONFIG_KEYBOARD_SAMSUNG is not set +# CONFIG_KEYBOARD_STOWAWAY is not set +# CONFIG_KEYBOARD_SUNKBD is not set +# CONFIG_KEYBOARD_STMPE is not set +# CONFIG_KEYBOARD_OMAP4 is not set +# CONFIG_KEYBOARD_XTKBD is not set +CONFIG_INPUT_MOUSE=y +CONFIG_MOUSE_PS2=m +CONFIG_MOUSE_PS2_ALPS=y +CONFIG_MOUSE_PS2_LOGIPS2PP=y +CONFIG_MOUSE_PS2_SYNAPTICS=y +CONFIG_MOUSE_PS2_CYPRESS=y +CONFIG_MOUSE_PS2_TRACKPOINT=y +CONFIG_MOUSE_PS2_ELANTECH=y +# CONFIG_MOUSE_PS2_SENTELIC is not set +# CONFIG_MOUSE_PS2_TOUCHKIT is not set +# CONFIG_MOUSE_SERIAL is not set +# CONFIG_MOUSE_APPLETOUCH is not set +# CONFIG_MOUSE_BCM5974 is not set +# CONFIG_MOUSE_CYAPA is not set +# CONFIG_MOUSE_VSXXXAA is not set +# CONFIG_MOUSE_GPIO is not set +# CONFIG_MOUSE_SYNAPTICS_I2C is not set +# CONFIG_MOUSE_SYNAPTICS_USB is not set +# CONFIG_INPUT_JOYSTICK is not set +# CONFIG_INPUT_TABLET is not set +CONFIG_INPUT_TOUCHSCREEN=y +CONFIG_OF_TOUCHSCREEN=y +# CONFIG_TOUCHSCREEN_ADS7846 is not set +# CONFIG_TOUCHSCREEN_AD7877 is not set +# CONFIG_TOUCHSCREEN_AD7879 is not set +# CONFIG_TOUCHSCREEN_ATMEL_MXT is not set +# CONFIG_TOUCHSCREEN_AUO_PIXCIR is not set +# CONFIG_TOUCHSCREEN_BU21013 is not set +# CONFIG_TOUCHSCREEN_CY8CTMG110 is not set +# CONFIG_TOUCHSCREEN_CYTTSP_CORE is not set +# CONFIG_TOUCHSCREEN_CYTTSP4_CORE is not set +# CONFIG_TOUCHSCREEN_DA9052 is not set +# CONFIG_TOUCHSCREEN_DYNAPRO is not set +# CONFIG_TOUCHSCREEN_HAMPSHIRE is not set +# CONFIG_TOUCHSCREEN_EETI is not set +CONFIG_TOUCHSCREEN_EGALAX=y +# CONFIG_TOUCHSCREEN_FUJITSU is not set +# CONFIG_TOUCHSCREEN_ILI210X is not set +# CONFIG_TOUCHSCREEN_GUNZE is not set +# CONFIG_TOUCHSCREEN_ELO is not set +# CONFIG_TOUCHSCREEN_WACOM_W8001 is not set +# CONFIG_TOUCHSCREEN_WACOM_I2C is not set +# CONFIG_TOUCHSCREEN_MAX11801 is not set +# CONFIG_TOUCHSCREEN_MCS5000 is not set +# CONFIG_TOUCHSCREEN_MMS114 is not set +# CONFIG_TOUCHSCREEN_MTOUCH is not set +# CONFIG_TOUCHSCREEN_INEXIO is not set +# CONFIG_TOUCHSCREEN_MK712 is not set +# CONFIG_TOUCHSCREEN_PENMOUNT is not set +# CONFIG_TOUCHSCREEN_EDT_FT5X06 is not set +# CONFIG_TOUCHSCREEN_TOUCHRIGHT is not set +# CONFIG_TOUCHSCREEN_TOUCHWIN is not set +# CONFIG_TOUCHSCREEN_PIXCIR is not set +# CONFIG_TOUCHSCREEN_WM97XX is not set +# CONFIG_TOUCHSCREEN_USB_COMPOSITE is not set +CONFIG_TOUCHSCREEN_MC13783=y +# CONFIG_TOUCHSCREEN_TOUCHIT213 is not set +# CONFIG_TOUCHSCREEN_TSC_SERIO is not set +# CONFIG_TOUCHSCREEN_TSC2005 is not set +CONFIG_TOUCHSCREEN_TSC2007=y +# CONFIG_TOUCHSCREEN_ST1232 is not set +CONFIG_TOUCHSCREEN_STMPE=y +# CONFIG_TOUCHSCREEN_SUR40 is not set +# CONFIG_TOUCHSCREEN_TPS6507X is not set +# CONFIG_TOUCHSCREEN_ZFORCE is not set +CONFIG_INPUT_MISC=y +# CONFIG_INPUT_AD714X is not set +# CONFIG_INPUT_BMA150 is not set +# CONFIG_INPUT_MC13783_PWRBUTTON is not set +CONFIG_INPUT_MMA8450=y +# CONFIG_INPUT_MPU3050 is not set +# CONFIG_INPUT_GP2A is not set +# CONFIG_INPUT_GPIO_BEEPER is not set +# CONFIG_INPUT_GPIO_TILT_POLLED is not set +# CONFIG_INPUT_ATI_REMOTE2 is not set +# CONFIG_INPUT_KEYSPAN_REMOTE is not set +# CONFIG_INPUT_KXTJ9 is not set +# CONFIG_INPUT_POWERMATE is not set +# CONFIG_INPUT_YEALINK is not set +# CONFIG_INPUT_CM109 is not set +# CONFIG_INPUT_UINPUT is not set +# CONFIG_INPUT_PCF8574 is not set +# CONFIG_INPUT_PWM_BEEPER is not set +# CONFIG_INPUT_GPIO_ROTARY_ENCODER is not set +# CONFIG_INPUT_DA9052_ONKEY is not set +# CONFIG_INPUT_ADXL34X is not set +# CONFIG_INPUT_IMS_PCU is not set +# CONFIG_INPUT_CMA3000 is not set +# CONFIG_INPUT_SOC_BUTTON_ARRAY is not set + +# +# Hardware I/O ports +# +CONFIG_SERIO=y +CONFIG_SERIO_SERPORT=m +# CONFIG_SERIO_PCIPS2 is not set +CONFIG_SERIO_LIBPS2=y +# CONFIG_SERIO_RAW is not set +# CONFIG_SERIO_ALTERA_PS2 is not set +# CONFIG_SERIO_PS2MULT is not set +# CONFIG_SERIO_ARC_PS2 is not set +# CONFIG_SERIO_APBPS2 is not set +# CONFIG_GAMEPORT is not set + +# +# Character devices +# +CONFIG_TTY=y +CONFIG_VT=y +CONFIG_CONSOLE_TRANSLATIONS=y +CONFIG_VT_CONSOLE=y +CONFIG_VT_CONSOLE_SLEEP=y +CONFIG_HW_CONSOLE=y +CONFIG_VT_HW_CONSOLE_BINDING=y +CONFIG_UNIX98_PTYS=y +# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set +# CONFIG_LEGACY_PTYS is not set +# CONFIG_SERIAL_NONSTANDARD is not set +# CONFIG_NOZOMI is not set +# CONFIG_N_GSM is not set +# CONFIG_TRACE_SINK is not set +# CONFIG_DEVKMEM is not set + +# +# Serial drivers +# +# CONFIG_SERIAL_8250 is not set + +# +# Non-8250 serial port support +# +# CONFIG_SERIAL_EARLYCON_ARM_SEMIHOST is not set +# CONFIG_SERIAL_MAX3100 is not set +# CONFIG_SERIAL_MAX310X is not set +# CONFIG_SERIAL_MFD_HSU is not set +CONFIG_SERIAL_IMX=y +CONFIG_SERIAL_IMX_CONSOLE=y +CONFIG_SERIAL_CORE=y +CONFIG_SERIAL_CORE_CONSOLE=y +# CONFIG_SERIAL_JSM is not set +# CONFIG_SERIAL_SCCNXP is not set +# CONFIG_SERIAL_SC16IS7XX is not set +# CONFIG_SERIAL_ALTERA_JTAGUART is not set +# CONFIG_SERIAL_ALTERA_UART is not set +# CONFIG_SERIAL_IFX6X60 is not set +# CONFIG_SERIAL_XILINX_PS_UART is not set +# CONFIG_SERIAL_ARC is not set +# CONFIG_SERIAL_RP2 is not set +CONFIG_SERIAL_FSL_LPUART=y +CONFIG_SERIAL_FSL_LPUART_CONSOLE=y +# CONFIG_SERIAL_ST_ASC is not set +# CONFIG_TTY_PRINTK is not set +# CONFIG_HVC_DCC is not set +# CONFIG_IPMI_HANDLER is not set +CONFIG_HW_RANDOM=y +# CONFIG_HW_RANDOM_TIMERIOMEM is not set +CONFIG_HW_RANDOM_MXC_RNGA=y +# CONFIG_R3964 is not set +# CONFIG_APPLICOM is not set +# CONFIG_RAW_DRIVER is not set +# CONFIG_TCG_TPM is not set +CONFIG_DEVPORT=y +CONFIG_I2C=y +CONFIG_I2C_BOARDINFO=y +# CONFIG_I2C_COMPAT is not set +CONFIG_I2C_CHARDEV=y +CONFIG_I2C_MUX=y + +# +# Multiplexer I2C Chip support +# +# CONFIG_I2C_ARB_GPIO_CHALLENGE is not set +# CONFIG_I2C_MUX_GPIO is not set +# CONFIG_I2C_MUX_PCA9541 is not set +# CONFIG_I2C_MUX_PCA954x is not set +# CONFIG_I2C_MUX_PINCTRL is not set +# CONFIG_I2C_HELPER_AUTO is not set +# CONFIG_I2C_SMBUS is not set + +# +# I2C Algorithms +# +CONFIG_I2C_ALGOBIT=y +CONFIG_I2C_ALGOPCF=m +CONFIG_I2C_ALGOPCA=m + +# +# I2C Hardware Bus support +# + +# +# PC SMBus host controller drivers +# +# CONFIG_I2C_ALI1535 is not set +# CONFIG_I2C_ALI1563 is not set +# CONFIG_I2C_ALI15X3 is not set +# CONFIG_I2C_AMD756 is not set +# CONFIG_I2C_AMD8111 is not set +# CONFIG_I2C_I801 is not set +# CONFIG_I2C_ISCH is not set +# CONFIG_I2C_PIIX4 is not set +# CONFIG_I2C_NFORCE2 is not set +# CONFIG_I2C_SIS5595 is not set +# CONFIG_I2C_SIS630 is not set +# CONFIG_I2C_SIS96X is not set +# CONFIG_I2C_VIA is not set +# CONFIG_I2C_VIAPRO is not set + +# +# I2C system bus drivers (mostly embedded / system-on-chip) +# +# CONFIG_I2C_CBUS_GPIO is not set +# CONFIG_I2C_DESIGNWARE_PLATFORM is not set +# CONFIG_I2C_DESIGNWARE_PCI is not set +# CONFIG_I2C_GPIO is not set +CONFIG_I2C_IMX=y +# CONFIG_I2C_OCORES is not set +# CONFIG_I2C_PCA_PLATFORM is not set +# CONFIG_I2C_PXA_PCI is not set +# CONFIG_I2C_RK3X is not set +# CONFIG_I2C_SIMTEC is not set +# CONFIG_I2C_XILINX is not set + +# +# External I2C/SMBus adapter drivers +# +# CONFIG_I2C_DIOLAN_U2C is not set +# CONFIG_I2C_PARPORT_LIGHT is not set +# CONFIG_I2C_ROBOTFUZZ_OSIF is not set +# CONFIG_I2C_TAOS_EVM is not set +# CONFIG_I2C_TINY_USB is not set + +# +# Other I2C/SMBus bus drivers +# +# CONFIG_I2C_STUB is not set +# CONFIG_I2C_DEBUG_CORE is not set +# CONFIG_I2C_DEBUG_ALGO is not set +# CONFIG_I2C_DEBUG_BUS is not set +CONFIG_SPI=y +# CONFIG_SPI_DEBUG is not set +CONFIG_SPI_MASTER=y + +# +# SPI Master Controller Drivers +# +# CONFIG_SPI_ALTERA is not set +CONFIG_SPI_BITBANG=y +# CONFIG_SPI_CADENCE is not set +# CONFIG_SPI_GPIO is not set +CONFIG_SPI_IMX=y +# CONFIG_SPI_FSL_SPI is not set +# CONFIG_SPI_FSL_DSPI is not set +# CONFIG_SPI_OC_TINY is not set +# CONFIG_SPI_PXA2XX is not set +# CONFIG_SPI_PXA2XX_PCI is not set +# CONFIG_SPI_SC18IS602 is not set +# CONFIG_SPI_XCOMM is not set +# CONFIG_SPI_XILINX is not set +# CONFIG_SPI_DESIGNWARE is not set + +# +# SPI Protocol Masters +# +# CONFIG_SPI_SPIDEV is not set +# CONFIG_SPI_TLE62X0 is not set +# CONFIG_SPMI is not set +# CONFIG_HSI is not set + +# +# PPS support +# +CONFIG_PPS=y +# CONFIG_PPS_DEBUG is not set + +# +# PPS clients support +# +# CONFIG_PPS_CLIENT_KTIMER is not set +# CONFIG_PPS_CLIENT_LDISC is not set +# CONFIG_PPS_CLIENT_GPIO is not set + +# +# PPS generators support +# + +# +# PTP clock support +# +CONFIG_PTP_1588_CLOCK=y + +# +# Enable PHYLIB and NETWORK_PHY_TIMESTAMPING to see the additional clocks. +# +CONFIG_PINCTRL=y + +# +# Pin controllers +# +CONFIG_PINMUX=y +CONFIG_PINCONF=y +# CONFIG_DEBUG_PINCTRL is not set +# CONFIG_PINCTRL_BCM281XX is not set +CONFIG_PINCTRL_IMX=y +CONFIG_PINCTRL_IMX35=y +CONFIG_PINCTRL_IMX50=y +CONFIG_PINCTRL_IMX51=y +CONFIG_PINCTRL_IMX53=y +CONFIG_PINCTRL_IMX6Q=y +CONFIG_PINCTRL_IMX6SL=y +CONFIG_PINCTRL_VF610=y +# CONFIG_PINCTRL_APQ8064 is not set +# CONFIG_PINCTRL_IPQ8064 is not set +# CONFIG_PINCTRL_SINGLE is not set +CONFIG_ARCH_HAVE_CUSTOM_GPIO_H=y +CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y +CONFIG_ARCH_REQUIRE_GPIOLIB=y +CONFIG_GPIOLIB=y +CONFIG_GPIO_DEVRES=y +CONFIG_OF_GPIO=y +# CONFIG_DEBUG_GPIO is not set +CONFIG_GPIO_SYSFS=y +CONFIG_GPIO_GENERIC=y +# CONFIG_GPIO_DA9052 is not set + +# +# Memory mapped GPIO drivers: +# +# CONFIG_GPIO_GENERIC_PLATFORM is not set +# CONFIG_GPIO_DWAPB is not set +# CONFIG_GPIO_EM is not set +# CONFIG_GPIO_ZEVIO is not set +CONFIG_GPIO_MXC=y +# CONFIG_GPIO_SCH311X is not set +# CONFIG_GPIO_SYSCON is not set +# CONFIG_GPIO_VX855 is not set +# CONFIG_GPIO_GRGPIO is not set + +# +# I2C GPIO expanders: +# +# CONFIG_GPIO_MAX7300 is not set +# CONFIG_GPIO_MAX732X is not set +CONFIG_GPIO_MC9S08DZ60=y +# CONFIG_GPIO_PCA953X is not set +# CONFIG_GPIO_PCF857X is not set +# CONFIG_GPIO_SX150X is not set +# CONFIG_GPIO_STMPE is not set +# CONFIG_GPIO_ADP5588 is not set +# CONFIG_GPIO_ADNP is not set + +# +# PCI GPIO expanders: +# +# CONFIG_GPIO_BT8XX is not set +# CONFIG_GPIO_AMD8111 is not set +# CONFIG_GPIO_ML_IOH is not set +# CONFIG_GPIO_RDC321X is not set + +# +# SPI GPIO expanders: +# +# CONFIG_GPIO_MAX7301 is not set +# CONFIG_GPIO_MCP23S08 is not set +# CONFIG_GPIO_MC33880 is not set +# CONFIG_GPIO_74X164 is not set + +# +# AC97 GPIO expanders: +# + +# +# LPC GPIO expanders: +# + +# +# MODULbus GPIO expanders: +# +# CONFIG_GPIO_BCM_KONA is not set + +# +# USB GPIO expanders: +# +# CONFIG_W1 is not set +# CONFIG_POWER_SUPPLY is not set +# CONFIG_POWER_AVS is not set +# CONFIG_HWMON is not set +# CONFIG_THERMAL is not set +CONFIG_WATCHDOG=y +CONFIG_WATCHDOG_CORE=y +# CONFIG_WATCHDOG_NOWAYOUT is not set + +# +# Watchdog Device Drivers +# +# CONFIG_SOFT_WATCHDOG is not set +# CONFIG_DA9052_WATCHDOG is not set +# CONFIG_GPIO_WATCHDOG is not set +# CONFIG_XILINX_WATCHDOG is not set +# CONFIG_DW_WATCHDOG is not set +# CONFIG_MAX63XX_WATCHDOG is not set +CONFIG_IMX2_WDT=y +# CONFIG_ALIM7101_WDT is not set +# CONFIG_I6300ESB_WDT is not set +# CONFIG_MEN_A21_WDT is not set + +# +# PCI-based Watchdog Cards +# +# CONFIG_PCIPCWATCHDOG is not set +# CONFIG_WDTPCI is not set + +# +# USB-based Watchdog Cards +# +# CONFIG_USBPCWATCHDOG is not set +CONFIG_SSB_POSSIBLE=y + +# +# Sonics Silicon Backplane +# +# CONFIG_SSB is not set +CONFIG_BCMA_POSSIBLE=y + +# +# Broadcom specific AMBA +# +# CONFIG_BCMA is not set + +# +# Multifunction device drivers +# +CONFIG_MFD_CORE=y +# CONFIG_MFD_AS3711 is not set +# CONFIG_MFD_AS3722 is not set +# CONFIG_PMIC_ADP5520 is not set +# CONFIG_MFD_AAT2870_CORE is not set +# CONFIG_MFD_BCM590XX is not set +# CONFIG_MFD_AXP20X is not set +# CONFIG_MFD_CROS_EC is not set +# CONFIG_MFD_ASIC3 is not set +# CONFIG_PMIC_DA903X is not set +CONFIG_PMIC_DA9052=y +# CONFIG_MFD_DA9052_SPI is not set +CONFIG_MFD_DA9052_I2C=y +# CONFIG_MFD_DA9055 is not set +# CONFIG_MFD_DA9063 is not set +CONFIG_MFD_MC13XXX=y +CONFIG_MFD_MC13XXX_SPI=y +CONFIG_MFD_MC13XXX_I2C=y +# CONFIG_HTC_EGPIO is not set +# CONFIG_HTC_PASIC3 is not set +# CONFIG_HTC_I2CPLD is not set +# CONFIG_LPC_ICH is not set +# CONFIG_LPC_SCH is not set +# CONFIG_MFD_JANZ_CMODIO is not set +# CONFIG_MFD_KEMPLD is not set +# CONFIG_MFD_88PM800 is not set +# CONFIG_MFD_88PM805 is not set +# CONFIG_MFD_88PM860X is not set +# CONFIG_MFD_MAX14577 is not set +# CONFIG_MFD_MAX77686 is not set +# CONFIG_MFD_MAX77693 is not set +# CONFIG_MFD_MAX8907 is not set +# CONFIG_MFD_MAX8925 is not set +# CONFIG_MFD_MAX8997 is not set +# CONFIG_MFD_MAX8998 is not set +# CONFIG_EZX_PCAP is not set +# CONFIG_MFD_VIPERBOARD is not set +# CONFIG_MFD_RETU is not set +# CONFIG_MFD_PCF50633 is not set +# CONFIG_UCB1400_CORE is not set +# CONFIG_MFD_PM8921_CORE is not set +# CONFIG_MFD_RDC321X is not set +# CONFIG_MFD_RTSX_PCI is not set +# CONFIG_MFD_RTSX_USB is not set +# CONFIG_MFD_RC5T583 is not set +# CONFIG_MFD_SEC_CORE is not set +# CONFIG_MFD_SI476X_CORE is not set +# CONFIG_MFD_SM501 is not set +# CONFIG_MFD_SMSC is not set +# CONFIG_ABX500_CORE is not set +CONFIG_MFD_STMPE=y + +# +# STMicroelectronics STMPE Interface Drivers +# +CONFIG_STMPE_I2C=y +# CONFIG_STMPE_SPI is not set +CONFIG_MFD_SYSCON=y +# CONFIG_MFD_TI_AM335X_TSCADC is not set +# CONFIG_MFD_LP3943 is not set +# CONFIG_MFD_LP8788 is not set +# CONFIG_MFD_PALMAS is not set +# CONFIG_TPS6105X is not set +# CONFIG_TPS65010 is not set +# CONFIG_TPS6507X is not set +# CONFIG_MFD_TPS65090 is not set +# CONFIG_MFD_TPS65217 is not set +# CONFIG_MFD_TPS65218 is not set +# CONFIG_MFD_TPS6586X is not set +# CONFIG_MFD_TPS65910 is not set +# CONFIG_MFD_TPS65912 is not set +# CONFIG_MFD_TPS65912_I2C is not set +# CONFIG_MFD_TPS65912_SPI is not set +# CONFIG_MFD_TPS80031 is not set +# CONFIG_TWL4030_CORE is not set +# CONFIG_TWL6040_CORE is not set +# CONFIG_MFD_WL1273_CORE is not set +# CONFIG_MFD_LM3533 is not set +# CONFIG_MFD_TIMBERDALE is not set +# CONFIG_MFD_TC3589X is not set +# CONFIG_MFD_TMIO is not set +# CONFIG_MFD_T7L66XB is not set +# CONFIG_MFD_TC6387XB is not set +# CONFIG_MFD_TC6393XB is not set +# CONFIG_MFD_VX855 is not set +# CONFIG_MFD_ARIZONA_I2C is not set +# CONFIG_MFD_ARIZONA_SPI is not set +# CONFIG_MFD_WM8400 is not set +# CONFIG_MFD_WM831X_I2C is not set +# CONFIG_MFD_WM831X_SPI is not set +# CONFIG_MFD_WM8350_I2C is not set +# CONFIG_MFD_WM8994 is not set +CONFIG_REGULATOR=y +# CONFIG_REGULATOR_DEBUG is not set +CONFIG_REGULATOR_FIXED_VOLTAGE=y +# CONFIG_REGULATOR_VIRTUAL_CONSUMER is not set +# CONFIG_REGULATOR_USERSPACE_CONSUMER is not set +# CONFIG_REGULATOR_ACT8865 is not set +# CONFIG_REGULATOR_AD5398 is not set +CONFIG_REGULATOR_ANATOP=y +CONFIG_REGULATOR_DA9052=y +# CONFIG_REGULATOR_DA9210 is not set +# CONFIG_REGULATOR_FAN53555 is not set +CONFIG_REGULATOR_GPIO=y +# CONFIG_REGULATOR_ISL6271A is not set +# CONFIG_REGULATOR_LP3971 is not set +# CONFIG_REGULATOR_LP3972 is not set +# CONFIG_REGULATOR_LP872X is not set +# CONFIG_REGULATOR_LP8755 is not set +# CONFIG_REGULATOR_LTC3589 is not set +# CONFIG_REGULATOR_MAX1586 is not set +# CONFIG_REGULATOR_MAX8649 is not set +# CONFIG_REGULATOR_MAX8660 is not set +# CONFIG_REGULATOR_MAX8952 is not set +# CONFIG_REGULATOR_MAX8973 is not set +CONFIG_REGULATOR_MC13XXX_CORE=y +CONFIG_REGULATOR_MC13783=y +CONFIG_REGULATOR_MC13892=y +CONFIG_REGULATOR_PFUZE100=y +# CONFIG_REGULATOR_TPS51632 is not set +# CONFIG_REGULATOR_TPS62360 is not set +# CONFIG_REGULATOR_TPS65023 is not set +# CONFIG_REGULATOR_TPS6507X is not set +# CONFIG_REGULATOR_TPS6524X is not set +CONFIG_MEDIA_SUPPORT=y + +# +# Multimedia core support +# +CONFIG_MEDIA_CAMERA_SUPPORT=y +# CONFIG_MEDIA_ANALOG_TV_SUPPORT is not set +# CONFIG_MEDIA_DIGITAL_TV_SUPPORT is not set +# CONFIG_MEDIA_RADIO_SUPPORT is not set +CONFIG_MEDIA_RC_SUPPORT=y +# CONFIG_MEDIA_CONTROLLER is not set +CONFIG_VIDEO_DEV=y +CONFIG_VIDEO_V4L2=y +# CONFIG_VIDEO_ADV_DEBUG is not set +# CONFIG_VIDEO_FIXED_MINOR_RANGES is not set +CONFIG_V4L2_MEM2MEM_DEV=y +CONFIG_VIDEOBUF_GEN=y +CONFIG_VIDEOBUF2_CORE=y +CONFIG_VIDEOBUF2_MEMOPS=y +CONFIG_VIDEOBUF2_DMA_CONTIG=y +# CONFIG_TTPCI_EEPROM is not set + +# +# Media drivers +# +CONFIG_RC_CORE=y +CONFIG_RC_MAP=y +CONFIG_RC_DECODERS=y +# CONFIG_LIRC is not set +CONFIG_IR_NEC_DECODER=y +CONFIG_IR_RC5_DECODER=y +CONFIG_IR_RC6_DECODER=y +CONFIG_IR_JVC_DECODER=y +CONFIG_IR_SONY_DECODER=y +CONFIG_IR_RC5_SZ_DECODER=y +CONFIG_IR_SANYO_DECODER=y +CONFIG_IR_SHARP_DECODER=y +CONFIG_IR_MCE_KBD_DECODER=y +CONFIG_RC_DEVICES=y +# CONFIG_RC_ATI_REMOTE is not set +# CONFIG_IR_IMON is not set +# CONFIG_IR_MCEUSB is not set +# CONFIG_IR_REDRAT3 is not set +# CONFIG_IR_STREAMZAP is not set +# CONFIG_IR_IGUANA is not set +# CONFIG_IR_TTUSBIR is not set +# CONFIG_IR_IMG is not set +# CONFIG_RC_LOOPBACK is not set +CONFIG_IR_GPIO_CIR=y +# CONFIG_MEDIA_USB_SUPPORT is not set +# CONFIG_MEDIA_PCI_SUPPORT is not set +CONFIG_V4L_PLATFORM_DRIVERS=y +# CONFIG_VIDEO_CAFE_CCIC is not set +CONFIG_SOC_CAMERA=y +# CONFIG_SOC_CAMERA_PLATFORM is not set +CONFIG_VIDEO_MX3=y +# CONFIG_VIDEO_RCAR_VIN is not set +# CONFIG_VIDEO_SH_MOBILE_CSI2 is not set +# CONFIG_VIDEO_SH_MOBILE_CEU is not set +CONFIG_V4L_MEM2MEM_DRIVERS=y +CONFIG_VIDEO_CODA=y +# CONFIG_VIDEO_MEM2MEM_DEINTERLACE is not set +# CONFIG_VIDEO_SH_VEU is not set +# CONFIG_V4L_TEST_DRIVERS is not set + +# +# Supported MMC/SDIO adapters +# +# CONFIG_CYPRESS_FIRMWARE is not set + +# +# Media ancillary drivers (tuners, sensors, i2c, frontends) +# +CONFIG_MEDIA_SUBDRV_AUTOSELECT=y +CONFIG_VIDEO_IR_I2C=y + +# +# Audio decoders, processors and mixers +# + +# +# RDS decoders +# + +# +# Video decoders +# + +# +# Video and audio decoders +# + +# +# Video encoders +# + +# +# Camera sensor devices +# + +# +# Flash devices +# + +# +# Video improvement chips +# + +# +# Audio/Video compression chips +# + +# +# Miscellaneous helper chips +# + +# +# Sensors used on soc_camera driver +# + +# +# soc_camera sensor drivers +# +# CONFIG_SOC_CAMERA_IMX074 is not set +# CONFIG_SOC_CAMERA_MT9M001 is not set +# CONFIG_SOC_CAMERA_MT9M111 is not set +# CONFIG_SOC_CAMERA_MT9T031 is not set +# CONFIG_SOC_CAMERA_MT9T112 is not set +# CONFIG_SOC_CAMERA_MT9V022 is not set +CONFIG_SOC_CAMERA_OV2640=y +# CONFIG_SOC_CAMERA_OV5642 is not set +# CONFIG_SOC_CAMERA_OV6650 is not set +# CONFIG_SOC_CAMERA_OV772X is not set +# CONFIG_SOC_CAMERA_OV9640 is not set +# CONFIG_SOC_CAMERA_OV9740 is not set +# CONFIG_SOC_CAMERA_RJ54N1 is not set +# CONFIG_SOC_CAMERA_TW9910 is not set + +# +# Tools to develop new frontends +# +# CONFIG_DVB_DUMMY_FE is not set + +# +# Graphics support +# +CONFIG_VGA_ARB=y +CONFIG_VGA_ARB_MAX_GPUS=16 +CONFIG_IMX_IPUV3_CORE=y + +# +# Direct Rendering Manager +# +CONFIG_DRM=y +CONFIG_DRM_KMS_HELPER=y +CONFIG_DRM_KMS_FB_HELPER=y +# CONFIG_DRM_LOAD_EDID_FIRMWARE is not set +CONFIG_DRM_GEM_CMA_HELPER=y +CONFIG_DRM_KMS_CMA_HELPER=y + +# +# I2C encoder or helper chips +# +# CONFIG_DRM_I2C_CH7006 is not set +# CONFIG_DRM_I2C_SIL164 is not set +# CONFIG_DRM_I2C_NXP_TDA998X is not set +# CONFIG_DRM_PTN3460 is not set +# CONFIG_DRM_TDFX is not set +# CONFIG_DRM_R128 is not set +# CONFIG_DRM_RADEON is not set +# CONFIG_DRM_NOUVEAU is not set +# CONFIG_DRM_MGA is not set +# CONFIG_DRM_VIA is not set +# CONFIG_DRM_SAVAGE is not set +# CONFIG_DRM_EXYNOS is not set +# CONFIG_DRM_VMWGFX is not set +# CONFIG_DRM_UDL is not set +# CONFIG_DRM_AST is not set +# CONFIG_DRM_MGAG200 is not set +# CONFIG_DRM_CIRRUS_QEMU is not set +# CONFIG_DRM_ARMADA is not set +# CONFIG_DRM_TILCDC is not set +# CONFIG_DRM_QXL is not set +# CONFIG_DRM_BOCHS is not set +CONFIG_DRM_PANEL=y + +# +# Display Panels +# +CONFIG_DRM_PANEL_SIMPLE=y +# CONFIG_DRM_PANEL_LD9040 is not set +# CONFIG_DRM_PANEL_S6E8AA0 is not set + +# +# Frame buffer Devices +# +CONFIG_FB=y +# CONFIG_FIRMWARE_EDID is not set +# CONFIG_FB_DDC is not set +# CONFIG_FB_BOOT_VESA_SUPPORT is not set +CONFIG_FB_CFB_FILLRECT=y +CONFIG_FB_CFB_COPYAREA=y +CONFIG_FB_CFB_IMAGEBLIT=y +# CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set +CONFIG_FB_SYS_FILLRECT=y +CONFIG_FB_SYS_COPYAREA=y +CONFIG_FB_SYS_IMAGEBLIT=y +# CONFIG_FB_FOREIGN_ENDIAN is not set +# CONFIG_FB_SYS_FOPS is not set +# CONFIG_FB_SVGALIB is not set +# CONFIG_FB_MACMODES is not set +# CONFIG_FB_BACKLIGHT is not set +# CONFIG_FB_MODE_HELPERS is not set +# CONFIG_FB_TILEBLITTING is not set + +# +# Frame buffer hardware drivers +# +# CONFIG_FB_CIRRUS is not set +# CONFIG_FB_PM2 is not set +# CONFIG_FB_IMX is not set +# CONFIG_FB_CYBER2000 is not set +# CONFIG_FB_ASILIANT is not set +# CONFIG_FB_IMSTT is not set +# CONFIG_FB_UVESA is not set +# CONFIG_FB_OPENCORES is not set +# CONFIG_FB_S1D13XXX is not set +# CONFIG_FB_NVIDIA is not set +# CONFIG_FB_RIVA is not set +# CONFIG_FB_I740 is not set +# CONFIG_FB_MATROX is not set +# CONFIG_FB_RADEON is not set +# CONFIG_FB_ATY128 is not set +# CONFIG_FB_ATY is not set +# CONFIG_FB_S3 is not set +# CONFIG_FB_SAVAGE is not set +# CONFIG_FB_SIS is not set +# CONFIG_FB_NEOMAGIC is not set +# CONFIG_FB_KYRO is not set +# CONFIG_FB_3DFX is not set +# CONFIG_FB_VOODOO1 is not set +# CONFIG_FB_VT8623 is not set +# CONFIG_FB_TRIDENT is not set +# CONFIG_FB_ARK is not set +# CONFIG_FB_PM3 is not set +# CONFIG_FB_CARMINE is not set +# CONFIG_FB_SMSCUFX is not set +# CONFIG_FB_UDL is not set +# CONFIG_FB_VIRTUAL is not set +# CONFIG_FB_METRONOME is not set +# CONFIG_FB_MB862XX is not set +CONFIG_FB_MX3=y +# CONFIG_FB_BROADSHEET is not set +# CONFIG_FB_AUO_K190X is not set +# CONFIG_FB_SIMPLE is not set +# CONFIG_FB_SSD1307 is not set +CONFIG_BACKLIGHT_LCD_SUPPORT=y +CONFIG_LCD_CLASS_DEVICE=y +CONFIG_LCD_L4F00242T03=y +# CONFIG_LCD_LMS283GF05 is not set +# CONFIG_LCD_LTV350QV is not set +# CONFIG_LCD_ILI922X is not set +# CONFIG_LCD_ILI9320 is not set +# CONFIG_LCD_TDO24M is not set +# CONFIG_LCD_VGG2432A4 is not set +CONFIG_LCD_PLATFORM=y +# CONFIG_LCD_S6E63M0 is not set +# CONFIG_LCD_LD9040 is not set +# CONFIG_LCD_AMS369FG06 is not set +# CONFIG_LCD_LMS501KF03 is not set +# CONFIG_LCD_HX8357 is not set +CONFIG_BACKLIGHT_CLASS_DEVICE=y +CONFIG_BACKLIGHT_GENERIC=y +CONFIG_BACKLIGHT_PWM=y +# CONFIG_BACKLIGHT_DA9052 is not set +# CONFIG_BACKLIGHT_ADP8860 is not set +# CONFIG_BACKLIGHT_ADP8870 is not set +# CONFIG_BACKLIGHT_LM3630A is not set +# CONFIG_BACKLIGHT_LM3639 is not set +# CONFIG_BACKLIGHT_LP855X is not set +CONFIG_BACKLIGHT_GPIO=y +# CONFIG_BACKLIGHT_LV5207LP is not set +# CONFIG_BACKLIGHT_BD6107 is not set +# CONFIG_VGASTATE is not set +CONFIG_VIDEOMODE_HELPERS=y +CONFIG_HDMI=y + +# +# Console display driver support +# +CONFIG_DUMMY_CONSOLE=y +CONFIG_FRAMEBUFFER_CONSOLE=y +CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY=y +# CONFIG_FRAMEBUFFER_CONSOLE_ROTATION is not set +CONFIG_LOGO=y +CONFIG_LOGO_LINUX_MONO=y +CONFIG_LOGO_LINUX_VGA16=y +CONFIG_LOGO_LINUX_CLUT224=y +CONFIG_SOUND=y +# CONFIG_SOUND_OSS_CORE is not set +CONFIG_SND=y +CONFIG_SND_TIMER=y +CONFIG_SND_PCM=y +CONFIG_SND_DMAENGINE_PCM=y +CONFIG_SND_COMPRESS_OFFLOAD=y +CONFIG_SND_JACK=y +# CONFIG_SND_SEQUENCER is not set +# CONFIG_SND_MIXER_OSS is not set +# CONFIG_SND_PCM_OSS is not set +# CONFIG_SND_HRTIMER is not set +# CONFIG_SND_DYNAMIC_MINORS is not set +CONFIG_SND_SUPPORT_OLD_API=y +CONFIG_SND_VERBOSE_PROCFS=y +# CONFIG_SND_VERBOSE_PRINTK is not set +# CONFIG_SND_DEBUG is not set +# CONFIG_SND_RAWMIDI_SEQ is not set +# CONFIG_SND_OPL3_LIB_SEQ is not set +# CONFIG_SND_OPL4_LIB_SEQ is not set +# CONFIG_SND_SBAWE_SEQ is not set +# CONFIG_SND_EMU10K1_SEQ is not set +CONFIG_SND_DRIVERS=y +# CONFIG_SND_DUMMY is not set +# CONFIG_SND_ALOOP is not set +# CONFIG_SND_MTPAV is not set +# CONFIG_SND_SERIAL_U16550 is not set +# CONFIG_SND_MPU401 is not set +CONFIG_SND_PCI=y +# CONFIG_SND_AD1889 is not set +# CONFIG_SND_ALS300 is not set +# CONFIG_SND_ALI5451 is not set +# CONFIG_SND_ATIIXP is not set +# CONFIG_SND_ATIIXP_MODEM is not set +# CONFIG_SND_AU8810 is not set +# CONFIG_SND_AU8820 is not set +# CONFIG_SND_AU8830 is not set +# CONFIG_SND_AW2 is not set +# CONFIG_SND_AZT3328 is not set +# CONFIG_SND_BT87X is not set +# CONFIG_SND_CA0106 is not set +# CONFIG_SND_CMIPCI is not set +# CONFIG_SND_OXYGEN is not set +# CONFIG_SND_CS4281 is not set +# CONFIG_SND_CS46XX is not set +# CONFIG_SND_CTXFI is not set +# CONFIG_SND_DARLA20 is not set +# CONFIG_SND_GINA20 is not set +# CONFIG_SND_LAYLA20 is not set +# CONFIG_SND_DARLA24 is not set +# CONFIG_SND_GINA24 is not set +# CONFIG_SND_LAYLA24 is not set +# CONFIG_SND_MONA is not set +# CONFIG_SND_MIA is not set +# CONFIG_SND_ECHO3G is not set +# CONFIG_SND_INDIGO is not set +# CONFIG_SND_INDIGOIO is not set +# CONFIG_SND_INDIGODJ is not set +# CONFIG_SND_INDIGOIOX is not set +# CONFIG_SND_INDIGODJX is not set +# CONFIG_SND_EMU10K1 is not set +# CONFIG_SND_EMU10K1X is not set +# CONFIG_SND_ENS1370 is not set +# CONFIG_SND_ENS1371 is not set +# CONFIG_SND_ES1938 is not set +# CONFIG_SND_ES1968 is not set +# CONFIG_SND_FM801 is not set +# CONFIG_SND_HDSP is not set +# CONFIG_SND_HDSPM is not set +# CONFIG_SND_ICE1712 is not set +# CONFIG_SND_ICE1724 is not set +# CONFIG_SND_INTEL8X0 is not set +# CONFIG_SND_INTEL8X0M is not set +# CONFIG_SND_KORG1212 is not set +# CONFIG_SND_LOLA is not set +# CONFIG_SND_LX6464ES is not set +# CONFIG_SND_MAESTRO3 is not set +# CONFIG_SND_MIXART is not set +# CONFIG_SND_NM256 is not set +# CONFIG_SND_PCXHR is not set +# CONFIG_SND_RIPTIDE is not set +# CONFIG_SND_RME32 is not set +# CONFIG_SND_RME96 is not set +# CONFIG_SND_RME9652 is not set +# CONFIG_SND_SONICVIBES is not set +# CONFIG_SND_TRIDENT is not set +# CONFIG_SND_VIA82XX is not set +# CONFIG_SND_VIA82XX_MODEM is not set +# CONFIG_SND_VIRTUOSO is not set +# CONFIG_SND_VX222 is not set +# CONFIG_SND_YMFPCI is not set + +# +# HD-Audio +# +# CONFIG_SND_HDA_INTEL is not set +CONFIG_SND_ARM=y +CONFIG_SND_SPI=y +CONFIG_SND_USB=y +# CONFIG_SND_USB_AUDIO is not set +# CONFIG_SND_USB_UA101 is not set +# CONFIG_SND_USB_CAIAQ is not set +# CONFIG_SND_USB_6FIRE is not set +# CONFIG_SND_USB_HIFACE is not set +# CONFIG_SND_BCD2000 is not set +CONFIG_SND_SOC=y +CONFIG_SND_SOC_AC97_BUS=y +CONFIG_SND_SOC_GENERIC_DMAENGINE_PCM=y +# CONFIG_SND_ATMEL_SOC is not set +# CONFIG_SND_DESIGNWARE_I2S is not set + +# +# SoC Audio for Freescale CPUs +# + +# +# Common SoC Audio options for Freescale CPUs: +# +# CONFIG_SND_SOC_FSL_SAI is not set +CONFIG_SND_SOC_FSL_SSI=y +CONFIG_SND_SOC_FSL_SPDIF=y +# CONFIG_SND_SOC_FSL_ESAI is not set +CONFIG_SND_SOC_FSL_UTILS=y +CONFIG_SND_SOC_IMX_PCM_DMA=y +CONFIG_SND_SOC_IMX_AUDMUX=y +CONFIG_SND_IMX_SOC=y +CONFIG_SND_SOC_IMX_SSI=y +CONFIG_SND_SOC_IMX_PCM_FIQ=y + +# +# SoC Audio support for Freescale i.MX boards: +# +CONFIG_SND_SOC_PHYCORE_AC97=y +CONFIG_SND_SOC_EUKREA_TLV320=y +CONFIG_SND_SOC_IMX_WM8962=y +CONFIG_SND_SOC_IMX_SGTL5000=y +CONFIG_SND_SOC_IMX_SPDIF=y +CONFIG_SND_SOC_IMX_MC13783=y +CONFIG_SND_SOC_I2C_AND_SPI=y + +# +# CODEC drivers +# +# CONFIG_SND_SOC_ADAU1701 is not set +# CONFIG_SND_SOC_AK4104 is not set +# CONFIG_SND_SOC_AK4554 is not set +# CONFIG_SND_SOC_AK4642 is not set +# CONFIG_SND_SOC_AK5386 is not set +# CONFIG_SND_SOC_ALC5623 is not set +# CONFIG_SND_SOC_CS42L52 is not set +# CONFIG_SND_SOC_CS42L56 is not set +# CONFIG_SND_SOC_CS42L73 is not set +# CONFIG_SND_SOC_CS4270 is not set +# CONFIG_SND_SOC_CS4271 is not set +# CONFIG_SND_SOC_CS42XX8_I2C is not set +# CONFIG_SND_SOC_HDMI_CODEC is not set +# CONFIG_SND_SOC_PCM1681 is not set +# CONFIG_SND_SOC_PCM1792A is not set +# CONFIG_SND_SOC_PCM512x_I2C is not set +# CONFIG_SND_SOC_PCM512x_SPI is not set +CONFIG_SND_SOC_SGTL5000=y +# CONFIG_SND_SOC_SIRF_AUDIO_CODEC is not set +# CONFIG_SND_SOC_SPDIF is not set +# CONFIG_SND_SOC_STA350 is not set +# CONFIG_SND_SOC_TAS5086 is not set +CONFIG_SND_SOC_TLV320AIC23=y +CONFIG_SND_SOC_TLV320AIC23_I2C=y +# CONFIG_SND_SOC_TLV320AIC3X is not set +# CONFIG_SND_SOC_WM8510 is not set +# CONFIG_SND_SOC_WM8523 is not set +# CONFIG_SND_SOC_WM8580 is not set +# CONFIG_SND_SOC_WM8711 is not set +# CONFIG_SND_SOC_WM8728 is not set +# CONFIG_SND_SOC_WM8731 is not set +# CONFIG_SND_SOC_WM8737 is not set +# CONFIG_SND_SOC_WM8741 is not set +# CONFIG_SND_SOC_WM8750 is not set +# CONFIG_SND_SOC_WM8753 is not set +# CONFIG_SND_SOC_WM8770 is not set +# CONFIG_SND_SOC_WM8776 is not set +# CONFIG_SND_SOC_WM8804 is not set +# CONFIG_SND_SOC_WM8903 is not set +CONFIG_SND_SOC_WM8962=y +CONFIG_SND_SOC_WM9712=y +CONFIG_SND_SOC_MC13783=y +# CONFIG_SND_SOC_TPA6130A2 is not set +# CONFIG_SND_SIMPLE_CARD is not set +# CONFIG_SOUND_PRIME is not set +CONFIG_AC97_BUS=y + +# +# HID support +# +CONFIG_HID=y +# CONFIG_HIDRAW is not set +# CONFIG_UHID is not set +CONFIG_HID_GENERIC=y + +# +# Special HID drivers +# +# CONFIG_HID_A4TECH is not set +# CONFIG_HID_ACRUX is not set +# CONFIG_HID_APPLE is not set +# CONFIG_HID_APPLEIR is not set +# CONFIG_HID_AUREAL is not set +# CONFIG_HID_BELKIN is not set +# CONFIG_HID_CHERRY is not set +# CONFIG_HID_CHICONY is not set +# CONFIG_HID_PRODIKEYS is not set +# CONFIG_HID_CP2112 is not set +# CONFIG_HID_CYPRESS is not set +# CONFIG_HID_DRAGONRISE is not set +# CONFIG_HID_EMS_FF is not set +# CONFIG_HID_ELECOM is not set +# CONFIG_HID_ELO is not set +# CONFIG_HID_EZKEY is not set +# CONFIG_HID_HOLTEK is not set +# CONFIG_HID_HUION is not set +# CONFIG_HID_KEYTOUCH is not set +# CONFIG_HID_KYE is not set +# CONFIG_HID_UCLOGIC is not set +# CONFIG_HID_WALTOP is not set +# CONFIG_HID_GYRATION is not set +# CONFIG_HID_ICADE is not set +# CONFIG_HID_TWINHAN is not set +# CONFIG_HID_KENSINGTON is not set +# CONFIG_HID_LCPOWER is not set +# CONFIG_HID_LENOVO_TPKBD is not set +# CONFIG_HID_LOGITECH is not set +# CONFIG_HID_MAGICMOUSE is not set +# CONFIG_HID_MICROSOFT is not set +# CONFIG_HID_MONTEREY is not set +# CONFIG_HID_MULTITOUCH is not set +# CONFIG_HID_NTRIG is not set +# CONFIG_HID_ORTEK is not set +# CONFIG_HID_PANTHERLORD is not set +# CONFIG_HID_PETALYNX is not set +# CONFIG_HID_PICOLCD is not set +# CONFIG_HID_PRIMAX is not set +# CONFIG_HID_ROCCAT is not set +# CONFIG_HID_SAITEK is not set +# CONFIG_HID_SAMSUNG is not set +# CONFIG_HID_SONY is not set +# CONFIG_HID_SPEEDLINK is not set +# CONFIG_HID_STEELSERIES is not set +# CONFIG_HID_SUNPLUS is not set +# CONFIG_HID_RMI is not set +# CONFIG_HID_GREENASIA is not set +# CONFIG_HID_SMARTJOYPLUS is not set +# CONFIG_HID_TIVO is not set +# CONFIG_HID_TOPSEED is not set +# CONFIG_HID_THINGM is not set +# CONFIG_HID_THRUSTMASTER is not set +# CONFIG_HID_WACOM is not set +# CONFIG_HID_WIIMOTE is not set +# CONFIG_HID_XINMO is not set +# CONFIG_HID_ZEROPLUS is not set +# CONFIG_HID_ZYDACRON is not set +# CONFIG_HID_SENSOR_HUB is not set + +# +# USB HID support +# +CONFIG_USB_HID=y +# CONFIG_HID_PID is not set +# CONFIG_USB_HIDDEV is not set + +# +# I2C HID support +# +# CONFIG_I2C_HID is not set +CONFIG_USB_OHCI_LITTLE_ENDIAN=y +CONFIG_USB_SUPPORT=y +CONFIG_USB_COMMON=y +CONFIG_USB_ARCH_HAS_HCD=y +CONFIG_USB=y +# CONFIG_USB_ANNOUNCE_NEW_DEVICES is not set + +# +# Miscellaneous USB options +# +CONFIG_USB_DEFAULT_PERSIST=y +# CONFIG_USB_DYNAMIC_MINORS is not set +# CONFIG_USB_OTG is not set +# CONFIG_USB_OTG_WHITELIST is not set +# CONFIG_USB_OTG_BLACKLIST_HUB is not set +# CONFIG_USB_OTG_FSM is not set +# CONFIG_USB_MON is not set +# CONFIG_USB_WUSB_CBAF is not set + +# +# USB Host Controller Drivers +# +# CONFIG_USB_C67X00_HCD is not set +# CONFIG_USB_XHCI_HCD is not set +CONFIG_USB_EHCI_HCD=y +CONFIG_USB_EHCI_ROOT_HUB_TT=y +CONFIG_USB_EHCI_TT_NEWSCHED=y +CONFIG_USB_EHCI_PCI=y +CONFIG_USB_EHCI_MXC=y +# CONFIG_USB_EHCI_HCD_PLATFORM is not set +# CONFIG_USB_OXU210HP_HCD is not set +# CONFIG_USB_ISP116X_HCD is not set +# CONFIG_USB_ISP1760_HCD is not set +# CONFIG_USB_ISP1362_HCD is not set +# CONFIG_USB_FUSBH200_HCD is not set +# CONFIG_USB_FOTG210_HCD is not set +# CONFIG_USB_MAX3421_HCD is not set +# CONFIG_USB_OHCI_HCD is not set +# CONFIG_USB_UHCI_HCD is not set +# CONFIG_USB_SL811_HCD is not set +# CONFIG_USB_R8A66597_HCD is not set +# CONFIG_USB_IMX21_HCD is not set +# CONFIG_USB_HCD_TEST_MODE is not set +# CONFIG_USB_RENESAS_USBHS is not set + +# +# USB Device Class drivers +# +# CONFIG_USB_ACM is not set +# CONFIG_USB_PRINTER is not set +# CONFIG_USB_WDM is not set +# CONFIG_USB_TMC is not set + +# +# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may +# + +# +# also be needed; see USB_STORAGE Help for more info +# +CONFIG_USB_STORAGE=y +# CONFIG_USB_STORAGE_DEBUG is not set +# CONFIG_USB_STORAGE_REALTEK is not set +# CONFIG_USB_STORAGE_DATAFAB is not set +# CONFIG_USB_STORAGE_FREECOM is not set +# CONFIG_USB_STORAGE_ISD200 is not set +# CONFIG_USB_STORAGE_USBAT is not set +# CONFIG_USB_STORAGE_SDDR09 is not set +# CONFIG_USB_STORAGE_SDDR55 is not set +# CONFIG_USB_STORAGE_JUMPSHOT is not set +# CONFIG_USB_STORAGE_ALAUDA is not set +# CONFIG_USB_STORAGE_ONETOUCH is not set +# CONFIG_USB_STORAGE_KARMA is not set +# CONFIG_USB_STORAGE_CYPRESS_ATACB is not set +# CONFIG_USB_STORAGE_ENE_UB6250 is not set +# CONFIG_USB_UAS is not set + +# +# USB Imaging devices +# +# CONFIG_USB_MDC800 is not set +# CONFIG_USB_MICROTEK is not set +# CONFIG_USB_MUSB_HDRC is not set +# CONFIG_USB_DWC3 is not set +# CONFIG_USB_DWC2 is not set +CONFIG_USB_CHIPIDEA=y +CONFIG_USB_CHIPIDEA_UDC=y +CONFIG_USB_CHIPIDEA_HOST=y +# CONFIG_USB_CHIPIDEA_DEBUG is not set + +# +# USB port drivers +# +# CONFIG_USB_SERIAL is not set + +# +# USB Miscellaneous drivers +# +# CONFIG_USB_EMI62 is not set +# CONFIG_USB_EMI26 is not set +# CONFIG_USB_ADUTUX is not set +# CONFIG_USB_SEVSEG is not set +# CONFIG_USB_RIO500 is not set +# CONFIG_USB_LEGOTOWER is not set +# CONFIG_USB_LCD is not set +# CONFIG_USB_LED is not set +# CONFIG_USB_CYPRESS_CY7C63 is not set +# CONFIG_USB_CYTHERM is not set +# CONFIG_USB_IDMOUSE is not set +# CONFIG_USB_FTDI_ELAN is not set +# CONFIG_USB_APPLEDISPLAY is not set +# CONFIG_USB_SISUSBVGA is not set +# CONFIG_USB_LD is not set +# CONFIG_USB_TRANCEVIBRATOR is not set +# CONFIG_USB_IOWARRIOR is not set +# CONFIG_USB_TEST is not set +# CONFIG_USB_EHSET_TEST_FIXTURE is not set +# CONFIG_USB_ISIGHTFW is not set +# CONFIG_USB_YUREX is not set +# CONFIG_USB_EZUSB_FX2 is not set +# CONFIG_USB_HSIC_USB3503 is not set + +# +# USB Physical Layer drivers +# +CONFIG_USB_PHY=y +CONFIG_NOP_USB_XCEIV=y +# CONFIG_AM335X_PHY_USB is not set +# CONFIG_SAMSUNG_USB2PHY is not set +# CONFIG_SAMSUNG_USB3PHY is not set +# CONFIG_USB_GPIO_VBUS is not set +# CONFIG_USB_ISP1301 is not set +CONFIG_USB_MXS_PHY=y +# CONFIG_USB_ULPI is not set +CONFIG_USB_GADGET=y +# CONFIG_USB_GADGET_DEBUG is not set +# CONFIG_USB_GADGET_DEBUG_FILES is not set +# CONFIG_USB_GADGET_DEBUG_FS is not set +CONFIG_USB_GADGET_VBUS_DRAW=2 +CONFIG_USB_GADGET_STORAGE_NUM_BUFFERS=2 + +# +# USB Peripheral Controller +# +# CONFIG_USB_FSL_USB2 is not set +# CONFIG_USB_FUSB300 is not set +# CONFIG_USB_FOTG210_UDC is not set +# CONFIG_USB_GR_UDC is not set +# CONFIG_USB_R8A66597 is not set +# CONFIG_USB_PXA27X is not set +# CONFIG_USB_MV_UDC is not set +# CONFIG_USB_MV_U3D is not set +# CONFIG_USB_M66592 is not set +# CONFIG_USB_AMD5536UDC is not set +# CONFIG_USB_NET2272 is not set +# CONFIG_USB_NET2280 is not set +# CONFIG_USB_GOKU is not set +# CONFIG_USB_EG20T is not set +# CONFIG_USB_DUMMY_HCD is not set +CONFIG_USB_LIBCOMPOSITE=m +CONFIG_USB_U_ETHER=m +CONFIG_USB_F_ECM=m +CONFIG_USB_F_SUBSET=m +CONFIG_USB_F_RNDIS=m +CONFIG_USB_F_MASS_STORAGE=m +# CONFIG_USB_CONFIGFS is not set +# CONFIG_USB_ZERO is not set +# CONFIG_USB_AUDIO is not set +CONFIG_USB_ETH=m +CONFIG_USB_ETH_RNDIS=y +# CONFIG_USB_ETH_EEM is not set +# CONFIG_USB_G_NCM is not set +# CONFIG_USB_GADGETFS is not set +# CONFIG_USB_FUNCTIONFS is not set +CONFIG_USB_MASS_STORAGE=m +# CONFIG_USB_G_SERIAL is not set +# CONFIG_USB_MIDI_GADGET is not set +# CONFIG_USB_G_PRINTER is not set +# CONFIG_USB_CDC_COMPOSITE is not set +# CONFIG_USB_G_ACM_MS is not set +# CONFIG_USB_G_MULTI is not set +# CONFIG_USB_G_HID is not set +# CONFIG_USB_G_DBGP is not set +# CONFIG_USB_G_WEBCAM is not set +# CONFIG_UWB is not set +CONFIG_MMC=y +# CONFIG_MMC_DEBUG is not set +# CONFIG_MMC_CLKGATE is not set + +# +# MMC/SD/SDIO Card Drivers +# +CONFIG_MMC_BLOCK=y +CONFIG_MMC_BLOCK_MINORS=8 +CONFIG_MMC_BLOCK_BOUNCE=y +# CONFIG_SDIO_UART is not set +# CONFIG_MMC_TEST is not set + +# +# MMC/SD/SDIO Host Controller Drivers +# +CONFIG_MMC_SDHCI=y +CONFIG_MMC_SDHCI_IO_ACCESSORS=y +# CONFIG_MMC_SDHCI_PCI is not set +CONFIG_MMC_SDHCI_PLTFM=y +# CONFIG_MMC_SDHCI_OF_ARASAN is not set +CONFIG_MMC_SDHCI_ESDHC_IMX=y +# CONFIG_MMC_SDHCI_PXAV3 is not set +# CONFIG_MMC_SDHCI_PXAV2 is not set +# CONFIG_MMC_MXC is not set +# CONFIG_MMC_TIFM_SD is not set +# CONFIG_MMC_CB710 is not set +# CONFIG_MMC_VIA_SDMMC is not set +# CONFIG_MMC_DW is not set +# CONFIG_MMC_VUB300 is not set +# CONFIG_MMC_USHC is not set +# CONFIG_MMC_USDHI6ROL0 is not set +# CONFIG_MEMSTICK is not set +CONFIG_LEDS_GPIO_REGISTER=y +CONFIG_NEW_LEDS=y +CONFIG_LEDS_CLASS=y + +# +# LED drivers +# +# CONFIG_LEDS_LM3530 is not set +# CONFIG_LEDS_LM3642 is not set +# CONFIG_LEDS_PCA9532 is not set +CONFIG_LEDS_GPIO=y +# CONFIG_LEDS_LP3944 is not set +# CONFIG_LEDS_LP5521 is not set +# CONFIG_LEDS_LP5523 is not set +# CONFIG_LEDS_LP5562 is not set +# CONFIG_LEDS_LP8501 is not set +# CONFIG_LEDS_PCA955X is not set +# CONFIG_LEDS_PCA963X is not set +# CONFIG_LEDS_DA9052 is not set +# CONFIG_LEDS_DAC124S085 is not set +# CONFIG_LEDS_PWM is not set +# CONFIG_LEDS_REGULATOR is not set +# CONFIG_LEDS_BD2802 is not set +# CONFIG_LEDS_LT3593 is not set +# CONFIG_LEDS_MC13783 is not set +# CONFIG_LEDS_TCA6507 is not set +# CONFIG_LEDS_LM355x is not set + +# +# LED driver for blink(1) USB RGB LED is under Special HID drivers (HID_THINGM) +# +# CONFIG_LEDS_BLINKM is not set + +# +# LED Triggers +# +CONFIG_LEDS_TRIGGERS=y +CONFIG_LEDS_TRIGGER_TIMER=y +CONFIG_LEDS_TRIGGER_ONESHOT=y +CONFIG_LEDS_TRIGGER_HEARTBEAT=y +CONFIG_LEDS_TRIGGER_BACKLIGHT=y +# CONFIG_LEDS_TRIGGER_CPU is not set +CONFIG_LEDS_TRIGGER_GPIO=y +# CONFIG_LEDS_TRIGGER_DEFAULT_ON is not set + +# +# iptables trigger is under Netfilter config (LED target) +# +# CONFIG_LEDS_TRIGGER_TRANSIENT is not set +# CONFIG_LEDS_TRIGGER_CAMERA is not set +# CONFIG_ACCESSIBILITY is not set +# CONFIG_INFINIBAND is not set +# CONFIG_EDAC is not set +CONFIG_RTC_LIB=y +CONFIG_RTC_CLASS=y +CONFIG_RTC_HCTOSYS=y +CONFIG_RTC_SYSTOHC=y +CONFIG_RTC_HCTOSYS_DEVICE="rtc0" +# CONFIG_RTC_DEBUG is not set + +# +# RTC interfaces +# +CONFIG_RTC_INTF_SYSFS=y +CONFIG_RTC_INTF_PROC=y +CONFIG_RTC_INTF_DEV=y +CONFIG_RTC_INTF_DEV_UIE_EMUL=y +# CONFIG_RTC_DRV_TEST is not set + +# +# I2C RTC drivers +# +# CONFIG_RTC_DRV_DS1307 is not set +# CONFIG_RTC_DRV_DS1374 is not set +# CONFIG_RTC_DRV_DS1672 is not set +# CONFIG_RTC_DRV_DS3232 is not set +# CONFIG_RTC_DRV_HYM8563 is not set +# CONFIG_RTC_DRV_MAX6900 is not set +# CONFIG_RTC_DRV_RS5C372 is not set +# CONFIG_RTC_DRV_ISL1208 is not set +# CONFIG_RTC_DRV_ISL12022 is not set +# CONFIG_RTC_DRV_ISL12057 is not set +# CONFIG_RTC_DRV_X1205 is not set +# CONFIG_RTC_DRV_PCF2127 is not set +# CONFIG_RTC_DRV_PCF8523 is not set +CONFIG_RTC_DRV_PCF8563=y +# CONFIG_RTC_DRV_PCF8583 is not set +# CONFIG_RTC_DRV_M41T80 is not set +# CONFIG_RTC_DRV_BQ32K is not set +# CONFIG_RTC_DRV_S35390A is not set +# CONFIG_RTC_DRV_FM3130 is not set +# CONFIG_RTC_DRV_RX8581 is not set +# CONFIG_RTC_DRV_RX8025 is not set +# CONFIG_RTC_DRV_EM3027 is not set +# CONFIG_RTC_DRV_RV3029C2 is not set + +# +# SPI RTC drivers +# +# CONFIG_RTC_DRV_M41T93 is not set +# CONFIG_RTC_DRV_M41T94 is not set +# CONFIG_RTC_DRV_DS1305 is not set +# CONFIG_RTC_DRV_DS1343 is not set +# CONFIG_RTC_DRV_DS1347 is not set +# CONFIG_RTC_DRV_DS1390 is not set +# CONFIG_RTC_DRV_MAX6902 is not set +# CONFIG_RTC_DRV_R9701 is not set +# CONFIG_RTC_DRV_RS5C348 is not set +# CONFIG_RTC_DRV_DS3234 is not set +# CONFIG_RTC_DRV_PCF2123 is not set +# CONFIG_RTC_DRV_RX4581 is not set +# CONFIG_RTC_DRV_MCP795 is not set + +# +# Platform RTC drivers +# +# CONFIG_RTC_DRV_CMOS is not set +# CONFIG_RTC_DRV_DS1286 is not set +# CONFIG_RTC_DRV_DS1511 is not set +# CONFIG_RTC_DRV_DS1553 is not set +# CONFIG_RTC_DRV_DS1742 is not set +# CONFIG_RTC_DRV_DA9052 is not set +# CONFIG_RTC_DRV_STK17TA8 is not set +# CONFIG_RTC_DRV_M48T86 is not set +# CONFIG_RTC_DRV_M48T35 is not set +# CONFIG_RTC_DRV_M48T59 is not set +# CONFIG_RTC_DRV_MSM6242 is not set +# CONFIG_RTC_DRV_BQ4802 is not set +# CONFIG_RTC_DRV_RP5C01 is not set +# CONFIG_RTC_DRV_V3020 is not set +# CONFIG_RTC_DRV_DS2404 is not set + +# +# on-CPU RTC drivers +# +# CONFIG_RTC_DRV_IMXDI is not set +CONFIG_RTC_DRV_MC13XXX=y +CONFIG_RTC_DRV_MXC=y +CONFIG_RTC_DRV_SNVS=y +# CONFIG_RTC_DRV_MOXART is not set +# CONFIG_RTC_DRV_XGENE is not set + +# +# HID Sensor RTC drivers +# +# CONFIG_RTC_DRV_HID_SENSOR_TIME is not set +CONFIG_DMADEVICES=y +# CONFIG_DMADEVICES_DEBUG is not set + +# +# DMA Devices +# +# CONFIG_DW_DMAC_CORE is not set +# CONFIG_DW_DMAC is not set +# CONFIG_DW_DMAC_PCI is not set +CONFIG_MX3_IPU=y +CONFIG_MX3_IPU_IRQS=4 +CONFIG_IMX_SDMA=y +# CONFIG_IMX_DMA is not set +CONFIG_MXS_DMA=y +# CONFIG_FSL_EDMA is not set +CONFIG_DMA_ENGINE=y +CONFIG_DMA_OF=y + +# +# DMA Clients +# +# CONFIG_ASYNC_TX_DMA is not set +# CONFIG_DMATEST is not set +# CONFIG_AUXDISPLAY is not set +# CONFIG_UIO is not set +# CONFIG_VIRT_DRIVERS is not set + +# +# Virtio drivers +# +# CONFIG_VIRTIO_PCI is not set +# CONFIG_VIRTIO_MMIO is not set + +# +# Microsoft Hyper-V guest support +# +CONFIG_STAGING=y +# CONFIG_ET131X is not set +# CONFIG_USBIP_CORE is not set +# CONFIG_W35UND is not set +# CONFIG_PRISM2_USB is not set +# CONFIG_COMEDI is not set +# CONFIG_RTL8192U is not set +# CONFIG_RTLLIB is not set +# CONFIG_R8712U is not set +# CONFIG_R8188EU is not set +# CONFIG_R8192EE is not set +# CONFIG_R8723AU is not set +# CONFIG_R8821AE is not set +# CONFIG_RTS5208 is not set +# CONFIG_TRANZPORT is not set +# CONFIG_IDE_PHISON is not set +# CONFIG_LINE6_USB is not set +# CONFIG_VT6655 is not set +# CONFIG_VT6656 is not set +# CONFIG_DX_SEP is not set +# CONFIG_CRYSTALHD is not set +# CONFIG_FB_XGI is not set +# CONFIG_USB_ENESTORAGE is not set +# CONFIG_BCM_WIMAX is not set +# CONFIG_FT1000 is not set + +# +# Speakup console speech +# +# CONFIG_SPEAKUP is not set +# CONFIG_TOUCHSCREEN_CLEARPAD_TM1217 is not set +# CONFIG_TOUCHSCREEN_SYNAPTICS_I2C_RMI4 is not set +# CONFIG_STAGING_MEDIA is not set + +# +# Android +# +# CONFIG_ANDROID is not set +# CONFIG_USB_WPAN_HCD is not set +# CONFIG_WIMAX_GDM72XX is not set +# CONFIG_LTE_GDM724X is not set +CONFIG_NET_VENDOR_SILICOM=y +# CONFIG_SBYPASS is not set +# CONFIG_BPCTL is not set +# CONFIG_CED1401 is not set +CONFIG_DRM_IMX=y +CONFIG_DRM_IMX_FB_HELPER=y +CONFIG_DRM_IMX_PARALLEL_DISPLAY=y +CONFIG_DRM_IMX_TVE=y +CONFIG_DRM_IMX_LDB=y +CONFIG_DRM_IMX_IPUV3=y +CONFIG_DRM_IMX_HDMI=y +# CONFIG_DGRP is not set +# CONFIG_MTD_SPINAND_MT29F is not set +# CONFIG_LUSTRE_FS is not set +# CONFIG_XILLYBUS is not set +# CONFIG_DGNC is not set +# CONFIG_DGAP is not set +# CONFIG_GS_FPGABOOT is not set + +# +# SOC (System On Chip) specific Drivers +# +CONFIG_CLKDEV_LOOKUP=y +CONFIG_HAVE_CLK_PREPARE=y +CONFIG_COMMON_CLK=y + +# +# Common Clock Framework +# +# CONFIG_COMMON_CLK_SI5351 is not set +# CONFIG_COMMON_CLK_SI570 is not set +# CONFIG_COMMON_CLK_QCOM is not set + +# +# Hardware Spinlock drivers +# +CONFIG_CLKSRC_OF=y +CONFIG_CLKSRC_MMIO=y +CONFIG_VF_PIT_TIMER=y +# CONFIG_SH_TIMER_CMT is not set +# CONFIG_SH_TIMER_MTU2 is not set +# CONFIG_SH_TIMER_TMU is not set +# CONFIG_EM_TIMER_STI is not set +# CONFIG_CLKSRC_VERSATILE is not set +# CONFIG_MAILBOX is not set +# CONFIG_IOMMU_SUPPORT is not set + +# +# Remoteproc drivers +# +# CONFIG_STE_MODEM_RPROC is not set + +# +# Rpmsg drivers +# +# CONFIG_PM_DEVFREQ is not set +# CONFIG_EXTCON is not set +# CONFIG_MEMORY is not set +# CONFIG_IIO is not set +# CONFIG_VME_BUS is not set +CONFIG_PWM=y +CONFIG_PWM_SYSFS=y +# CONFIG_PWM_FSL_FTM is not set +CONFIG_PWM_IMX=y +# CONFIG_PWM_PCA9685 is not set +CONFIG_IRQCHIP=y +CONFIG_ARM_GIC=y +# CONFIG_IPACK_BUS is not set +CONFIG_ARCH_HAS_RESET_CONTROLLER=y +CONFIG_RESET_CONTROLLER=y +# CONFIG_FMC is not set + +# +# PHY Subsystem +# +# CONFIG_GENERIC_PHY is not set +# CONFIG_BCM_KONA_USB2_PHY is not set +# CONFIG_PHY_SAMSUNG_USB2 is not set +# CONFIG_POWERCAP is not set +# CONFIG_MCB is not set + +# +# File systems +# +CONFIG_DCACHE_WORD_ACCESS=y +CONFIG_EXT2_FS=y +CONFIG_EXT2_FS_XATTR=y +CONFIG_EXT2_FS_POSIX_ACL=y +CONFIG_EXT2_FS_SECURITY=y +# CONFIG_EXT2_FS_XIP is not set +CONFIG_EXT3_FS=y +CONFIG_EXT3_DEFAULTS_TO_ORDERED=y +CONFIG_EXT3_FS_XATTR=y +CONFIG_EXT3_FS_POSIX_ACL=y +CONFIG_EXT3_FS_SECURITY=y +CONFIG_EXT4_FS=y +CONFIG_EXT4_FS_POSIX_ACL=y +CONFIG_EXT4_FS_SECURITY=y +# CONFIG_EXT4_DEBUG is not set +CONFIG_JBD=y +# CONFIG_JBD_DEBUG is not set +CONFIG_JBD2=y +# CONFIG_JBD2_DEBUG is not set +CONFIG_FS_MBCACHE=y +# CONFIG_REISERFS_FS is not set +# CONFIG_JFS_FS is not set +# CONFIG_XFS_FS is not set +# CONFIG_GFS2_FS is not set +# CONFIG_OCFS2_FS is not set +# CONFIG_BTRFS_FS is not set +# CONFIG_NILFS2_FS is not set +CONFIG_FS_POSIX_ACL=y +CONFIG_FILE_LOCKING=y +CONFIG_FSNOTIFY=y +CONFIG_DNOTIFY=y +CONFIG_INOTIFY_USER=y +# CONFIG_FANOTIFY is not set +CONFIG_QUOTA=y +CONFIG_QUOTA_NETLINK_INTERFACE=y +# CONFIG_PRINT_QUOTA_WARNING is not set +# CONFIG_QUOTA_DEBUG is not set +# CONFIG_QFMT_V1 is not set +# CONFIG_QFMT_V2 is not set +CONFIG_QUOTACTL=y +CONFIG_AUTOFS4_FS=y +CONFIG_FUSE_FS=y +# CONFIG_CUSE is not set + +# +# Caches +# +# CONFIG_FSCACHE is not set + +# +# CD-ROM/DVD Filesystems +# +CONFIG_ISO9660_FS=m +CONFIG_JOLIET=y +CONFIG_ZISOFS=y +CONFIG_UDF_FS=m +CONFIG_UDF_NLS=y + +# +# DOS/FAT/NT Filesystems +# +CONFIG_FAT_FS=y +CONFIG_MSDOS_FS=m +CONFIG_VFAT_FS=y +CONFIG_FAT_DEFAULT_CODEPAGE=437 +CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1" +# CONFIG_NTFS_FS is not set + +# +# Pseudo filesystems +# +CONFIG_PROC_FS=y +CONFIG_PROC_SYSCTL=y +CONFIG_PROC_PAGE_MONITOR=y +CONFIG_KERNFS=y +CONFIG_SYSFS=y +CONFIG_TMPFS=y +# CONFIG_TMPFS_POSIX_ACL is not set +# CONFIG_TMPFS_XATTR is not set +# CONFIG_HUGETLB_PAGE is not set +CONFIG_CONFIGFS_FS=m +CONFIG_MISC_FILESYSTEMS=y +# CONFIG_ADFS_FS is not set +# CONFIG_AFFS_FS is not set +# CONFIG_ECRYPT_FS is not set +# CONFIG_HFS_FS is not set +# CONFIG_HFSPLUS_FS is not set +# CONFIG_BEFS_FS is not set +# CONFIG_BFS_FS is not set +# CONFIG_EFS_FS is not set +CONFIG_JFFS2_FS=y +CONFIG_JFFS2_FS_DEBUG=0 +CONFIG_JFFS2_FS_WRITEBUFFER=y +# CONFIG_JFFS2_FS_WBUF_VERIFY is not set +# CONFIG_JFFS2_SUMMARY is not set +# CONFIG_JFFS2_FS_XATTR is not set +# CONFIG_JFFS2_COMPRESSION_OPTIONS is not set +CONFIG_JFFS2_ZLIB=y +# CONFIG_JFFS2_LZO is not set +CONFIG_JFFS2_RTIME=y +# CONFIG_JFFS2_RUBIN is not set +CONFIG_UBIFS_FS=y +# CONFIG_UBIFS_FS_ADVANCED_COMPR is not set +CONFIG_UBIFS_FS_LZO=y +CONFIG_UBIFS_FS_ZLIB=y +# CONFIG_LOGFS is not set +# CONFIG_CRAMFS is not set +# CONFIG_SQUASHFS is not set +# CONFIG_VXFS_FS is not set +# CONFIG_MINIX_FS is not set +# CONFIG_OMFS_FS is not set +# CONFIG_HPFS_FS is not set +# CONFIG_QNX4FS_FS is not set +# CONFIG_QNX6FS_FS is not set +# CONFIG_ROMFS_FS is not set +# CONFIG_PSTORE is not set +# CONFIG_SYSV_FS is not set +# CONFIG_UFS_FS is not set +# CONFIG_F2FS_FS is not set +CONFIG_NETWORK_FILESYSTEMS=y +CONFIG_NFS_FS=y +CONFIG_NFS_V2=y +CONFIG_NFS_V3=y +CONFIG_NFS_V3_ACL=y +CONFIG_NFS_V4=y +# CONFIG_NFS_SWAP is not set +# CONFIG_NFS_V4_1 is not set +CONFIG_ROOT_NFS=y +# CONFIG_NFS_USE_LEGACY_DNS is not set +CONFIG_NFS_USE_KERNEL_DNS=y +# CONFIG_NFSD is not set +CONFIG_LOCKD=y +CONFIG_LOCKD_V4=y +CONFIG_NFS_ACL_SUPPORT=y +CONFIG_NFS_COMMON=y +CONFIG_SUNRPC=y +CONFIG_SUNRPC_GSS=y +# CONFIG_SUNRPC_DEBUG is not set +# CONFIG_CEPH_FS is not set +# CONFIG_CIFS is not set +# CONFIG_NCP_FS is not set +# CONFIG_CODA_FS is not set +# CONFIG_AFS_FS is not set +CONFIG_NLS=y +CONFIG_NLS_DEFAULT="cp437" +CONFIG_NLS_CODEPAGE_437=y +# CONFIG_NLS_CODEPAGE_737 is not set +# CONFIG_NLS_CODEPAGE_775 is not set +# CONFIG_NLS_CODEPAGE_850 is not set +# CONFIG_NLS_CODEPAGE_852 is not set +# CONFIG_NLS_CODEPAGE_855 is not set +# CONFIG_NLS_CODEPAGE_857 is not set +# CONFIG_NLS_CODEPAGE_860 is not set +# CONFIG_NLS_CODEPAGE_861 is not set +# CONFIG_NLS_CODEPAGE_862 is not set +# CONFIG_NLS_CODEPAGE_863 is not set +# CONFIG_NLS_CODEPAGE_864 is not set +# CONFIG_NLS_CODEPAGE_865 is not set +# CONFIG_NLS_CODEPAGE_866 is not set +# CONFIG_NLS_CODEPAGE_869 is not set +# CONFIG_NLS_CODEPAGE_936 is not set +# CONFIG_NLS_CODEPAGE_950 is not set +# CONFIG_NLS_CODEPAGE_932 is not set +# CONFIG_NLS_CODEPAGE_949 is not set +# CONFIG_NLS_CODEPAGE_874 is not set +# CONFIG_NLS_ISO8859_8 is not set +# CONFIG_NLS_CODEPAGE_1250 is not set +# CONFIG_NLS_CODEPAGE_1251 is not set +CONFIG_NLS_ASCII=y +CONFIG_NLS_ISO8859_1=y +# CONFIG_NLS_ISO8859_2 is not set +# CONFIG_NLS_ISO8859_3 is not set +# CONFIG_NLS_ISO8859_4 is not set +# CONFIG_NLS_ISO8859_5 is not set +# CONFIG_NLS_ISO8859_6 is not set +# CONFIG_NLS_ISO8859_7 is not set +# CONFIG_NLS_ISO8859_9 is not set +# CONFIG_NLS_ISO8859_13 is not set +# CONFIG_NLS_ISO8859_14 is not set +CONFIG_NLS_ISO8859_15=m +# CONFIG_NLS_KOI8_R is not set +# CONFIG_NLS_KOI8_U is not set +# CONFIG_NLS_MAC_ROMAN is not set +# CONFIG_NLS_MAC_CELTIC is not set +# CONFIG_NLS_MAC_CENTEURO is not set +# CONFIG_NLS_MAC_CROATIAN is not set +# CONFIG_NLS_MAC_CYRILLIC is not set +# CONFIG_NLS_MAC_GAELIC is not set +# CONFIG_NLS_MAC_GREEK is not set +# CONFIG_NLS_MAC_ICELAND is not set +# CONFIG_NLS_MAC_INUIT is not set +# CONFIG_NLS_MAC_ROMANIAN is not set +# CONFIG_NLS_MAC_TURKISH is not set +CONFIG_NLS_UTF8=y +# CONFIG_DLM is not set + +# +# Kernel hacking +# + +# +# printk and dmesg options +# +# CONFIG_PRINTK_TIME is not set +CONFIG_DEFAULT_MESSAGE_LOGLEVEL=4 +# CONFIG_BOOT_PRINTK_DELAY is not set +# CONFIG_DYNAMIC_DEBUG is not set + +# +# Compile-time checks and compiler options +# +# CONFIG_DEBUG_INFO is not set +CONFIG_ENABLE_WARN_DEPRECATED=y +CONFIG_ENABLE_MUST_CHECK=y +CONFIG_FRAME_WARN=1024 +# CONFIG_STRIP_ASM_SYMS is not set +# CONFIG_READABLE_ASM is not set +# CONFIG_UNUSED_SYMBOLS is not set +CONFIG_DEBUG_FS=y +# CONFIG_HEADERS_CHECK is not set +# CONFIG_DEBUG_SECTION_MISMATCH is not set +CONFIG_FRAME_POINTER=y +# CONFIG_DEBUG_FORCE_WEAK_PER_CPU is not set +CONFIG_MAGIC_SYSRQ=y +CONFIG_MAGIC_SYSRQ_DEFAULT_ENABLE=0x1 +CONFIG_DEBUG_KERNEL=y + +# +# Memory Debugging +# +# CONFIG_DEBUG_PAGEALLOC is not set +# CONFIG_DEBUG_OBJECTS is not set +# CONFIG_SLUB_STATS is not set +CONFIG_HAVE_DEBUG_KMEMLEAK=y +# CONFIG_DEBUG_KMEMLEAK is not set +# CONFIG_DEBUG_STACK_USAGE is not set +# CONFIG_DEBUG_VM is not set +# CONFIG_DEBUG_MEMORY_INIT is not set +# CONFIG_DEBUG_PER_CPU_MAPS is not set +# CONFIG_DEBUG_HIGHMEM is not set +# CONFIG_DEBUG_SHIRQ is not set + +# +# Debug Lockups and Hangs +# +# CONFIG_LOCKUP_DETECTOR is not set +# CONFIG_DETECT_HUNG_TASK is not set +# CONFIG_PANIC_ON_OOPS is not set +CONFIG_PANIC_ON_OOPS_VALUE=0 +CONFIG_PANIC_TIMEOUT=0 +# CONFIG_SCHED_DEBUG is not set +# CONFIG_SCHEDSTATS is not set +# CONFIG_TIMER_STATS is not set + +# +# Lock Debugging (spinlocks, mutexes, etc...) +# +# CONFIG_DEBUG_RT_MUTEXES is not set +# CONFIG_RT_MUTEX_TESTER is not set +CONFIG_DEBUG_SPINLOCK=y +CONFIG_DEBUG_MUTEXES=y +# CONFIG_DEBUG_WW_MUTEX_SLOWPATH is not set +CONFIG_DEBUG_LOCK_ALLOC=y +CONFIG_PROVE_LOCKING=y +CONFIG_LOCKDEP=y +# CONFIG_LOCK_STAT is not set +# CONFIG_DEBUG_LOCKDEP is not set +# CONFIG_DEBUG_ATOMIC_SLEEP is not set +# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set +# CONFIG_LOCK_TORTURE_TEST is not set +CONFIG_TRACE_IRQFLAGS=y +CONFIG_STACKTRACE=y +# CONFIG_DEBUG_KOBJECT is not set +# CONFIG_DEBUG_BUGVERBOSE is not set +# CONFIG_DEBUG_LIST is not set +# CONFIG_DEBUG_PI_LIST is not set +# CONFIG_DEBUG_SG is not set +# CONFIG_DEBUG_NOTIFIERS is not set +# CONFIG_DEBUG_CREDENTIALS is not set + +# +# RCU Debugging +# +# CONFIG_PROVE_RCU is not set +# CONFIG_SPARSE_RCU_POINTER is not set +# CONFIG_TORTURE_TEST is not set +# CONFIG_RCU_TORTURE_TEST is not set +CONFIG_RCU_CPU_STALL_TIMEOUT=21 +# CONFIG_RCU_CPU_STALL_INFO is not set +# CONFIG_RCU_TRACE is not set +# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set +# CONFIG_NOTIFIER_ERROR_INJECTION is not set +# CONFIG_FAULT_INJECTION is not set +CONFIG_HAVE_FUNCTION_TRACER=y +CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y +CONFIG_HAVE_DYNAMIC_FTRACE=y +CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y +CONFIG_HAVE_SYSCALL_TRACEPOINTS=y +CONFIG_HAVE_C_RECORDMCOUNT=y +CONFIG_TRACING_SUPPORT=y +# CONFIG_FTRACE is not set + +# +# Runtime Testing +# +# CONFIG_LKDTM is not set +# CONFIG_TEST_LIST_SORT is not set +# CONFIG_BACKTRACE_SELF_TEST is not set +# CONFIG_RBTREE_TEST is not set +# CONFIG_INTERVAL_TREE_TEST is not set +# CONFIG_PERCPU_TEST is not set +# CONFIG_ATOMIC64_SELFTEST is not set +# CONFIG_TEST_STRING_HELPERS is not set +# CONFIG_TEST_KSTRTOX is not set +# CONFIG_DMA_API_DEBUG is not set +# CONFIG_TEST_MODULE is not set +# CONFIG_TEST_USER_COPY is not set +# CONFIG_TEST_BPF is not set +# CONFIG_SAMPLES is not set +CONFIG_HAVE_ARCH_KGDB=y +# CONFIG_KGDB is not set +# CONFIG_ARM_PTDUMP is not set +# CONFIG_STRICT_DEVMEM is not set +# CONFIG_ARM_UNWIND is not set +# CONFIG_DEBUG_USER is not set +# CONFIG_DEBUG_LL is not set +CONFIG_DEBUG_IMX_UART_PORT=1 +CONFIG_DEBUG_VF_UART_PORT=1 +CONFIG_DEBUG_LL_INCLUDE="mach/debug-macro.S" +# CONFIG_DEBUG_UART_PL01X is not set +# CONFIG_DEBUG_UART_8250 is not set +CONFIG_UNCOMPRESS_INCLUDE="debug/uncompress.h" +# CONFIG_PID_IN_CONTEXTIDR is not set +# CONFIG_DEBUG_SET_MODULE_RONX is not set + +# +# Security options +# +CONFIG_KEYS=y +# CONFIG_PERSISTENT_KEYRINGS is not set +# CONFIG_BIG_KEYS is not set +# CONFIG_ENCRYPTED_KEYS is not set +# CONFIG_KEYS_DEBUG_PROC_KEYS is not set +# CONFIG_SECURITY_DMESG_RESTRICT is not set +# CONFIG_SECURITY is not set +CONFIG_SECURITYFS=y +CONFIG_DEFAULT_SECURITY_DAC=y +CONFIG_DEFAULT_SECURITY="" +CONFIG_CRYPTO=y + +# +# Crypto core or helper +# +CONFIG_CRYPTO_ALGAPI=y +CONFIG_CRYPTO_ALGAPI2=y +CONFIG_CRYPTO_AEAD=y +CONFIG_CRYPTO_AEAD2=y +CONFIG_CRYPTO_BLKCIPHER=y +CONFIG_CRYPTO_BLKCIPHER2=y +CONFIG_CRYPTO_HASH=y +CONFIG_CRYPTO_HASH2=y +CONFIG_CRYPTO_RNG=y +CONFIG_CRYPTO_RNG2=y +CONFIG_CRYPTO_PCOMP2=y +CONFIG_CRYPTO_MANAGER=y +CONFIG_CRYPTO_MANAGER2=y +# CONFIG_CRYPTO_USER is not set +CONFIG_CRYPTO_MANAGER_DISABLE_TESTS=y +# CONFIG_CRYPTO_GF128MUL is not set +# CONFIG_CRYPTO_NULL is not set +# CONFIG_CRYPTO_PCRYPT is not set +CONFIG_CRYPTO_WORKQUEUE=y +# CONFIG_CRYPTO_CRYPTD is not set +# CONFIG_CRYPTO_AUTHENC is not set +# CONFIG_CRYPTO_TEST is not set + +# +# Authenticated Encryption with Associated Data +# +CONFIG_CRYPTO_CCM=y +# CONFIG_CRYPTO_GCM is not set +CONFIG_CRYPTO_SEQIV=y + +# +# Block modes +# +# CONFIG_CRYPTO_CBC is not set +CONFIG_CRYPTO_CTR=y +# CONFIG_CRYPTO_CTS is not set +# CONFIG_CRYPTO_ECB is not set +# CONFIG_CRYPTO_LRW is not set +# CONFIG_CRYPTO_PCBC is not set +# CONFIG_CRYPTO_XTS is not set + +# +# Hash modes +# +# CONFIG_CRYPTO_CMAC is not set +# CONFIG_CRYPTO_HMAC is not set +# CONFIG_CRYPTO_XCBC is not set +# CONFIG_CRYPTO_VMAC is not set + +# +# Digest +# +CONFIG_CRYPTO_CRC32C=y +# CONFIG_CRYPTO_CRC32 is not set +CONFIG_CRYPTO_CRCT10DIF=y +# CONFIG_CRYPTO_GHASH is not set +# CONFIG_CRYPTO_MD4 is not set +# CONFIG_CRYPTO_MD5 is not set +# CONFIG_CRYPTO_MICHAEL_MIC is not set +# CONFIG_CRYPTO_RMD128 is not set +# CONFIG_CRYPTO_RMD160 is not set +# CONFIG_CRYPTO_RMD256 is not set +# CONFIG_CRYPTO_RMD320 is not set +# CONFIG_CRYPTO_SHA1 is not set +# CONFIG_CRYPTO_SHA1_ARM is not set +# CONFIG_CRYPTO_SHA256 is not set +# CONFIG_CRYPTO_SHA512 is not set +# CONFIG_CRYPTO_TGR192 is not set +# CONFIG_CRYPTO_WP512 is not set + +# +# Ciphers +# +CONFIG_CRYPTO_AES=y +# CONFIG_CRYPTO_AES_ARM is not set +# CONFIG_CRYPTO_ANUBIS is not set +CONFIG_CRYPTO_ARC4=y +# CONFIG_CRYPTO_BLOWFISH is not set +# CONFIG_CRYPTO_CAMELLIA is not set +# CONFIG_CRYPTO_CAST5 is not set +# CONFIG_CRYPTO_CAST6 is not set +# CONFIG_CRYPTO_DES is not set +# CONFIG_CRYPTO_FCRYPT is not set +# CONFIG_CRYPTO_KHAZAD is not set +# CONFIG_CRYPTO_SALSA20 is not set +# CONFIG_CRYPTO_SEED is not set +# CONFIG_CRYPTO_SERPENT is not set +# CONFIG_CRYPTO_TEA is not set +# CONFIG_CRYPTO_TWOFISH is not set + +# +# Compression +# +CONFIG_CRYPTO_DEFLATE=y +# CONFIG_CRYPTO_ZLIB is not set +CONFIG_CRYPTO_LZO=y +# CONFIG_CRYPTO_LZ4 is not set +# CONFIG_CRYPTO_LZ4HC is not set + +# +# Random Number Generation +# +# CONFIG_CRYPTO_ANSI_CPRNG is not set +# CONFIG_CRYPTO_USER_API_HASH is not set +# CONFIG_CRYPTO_USER_API_SKCIPHER is not set +# CONFIG_CRYPTO_HW is not set +# CONFIG_ASYMMETRIC_KEY_TYPE is not set +# CONFIG_BINARY_PRINTF is not set + +# +# Library routines +# +CONFIG_BITREVERSE=y +CONFIG_RATIONAL=y +CONFIG_GENERIC_STRNCPY_FROM_USER=y +CONFIG_GENERIC_STRNLEN_USER=y +CONFIG_GENERIC_NET_UTILS=y +CONFIG_GENERIC_PCI_IOMAP=y +CONFIG_GENERIC_IO=y +CONFIG_STMP_DEVICE=y +CONFIG_ARCH_USE_CMPXCHG_LOCKREF=y +CONFIG_CRC_CCITT=m +CONFIG_CRC16=y +CONFIG_CRC_T10DIF=y +CONFIG_CRC_ITU_T=m +CONFIG_CRC32=y +# CONFIG_CRC32_SELFTEST is not set +CONFIG_CRC32_SLICEBY8=y +# CONFIG_CRC32_SLICEBY4 is not set +# CONFIG_CRC32_SARWATE is not set +# CONFIG_CRC32_BIT is not set +CONFIG_CRC7=m +CONFIG_LIBCRC32C=m +# CONFIG_CRC8 is not set +# CONFIG_AUDIT_ARCH_COMPAT_GENERIC is not set +# CONFIG_RANDOM32_SELFTEST is not set +CONFIG_ZLIB_INFLATE=y +CONFIG_ZLIB_DEFLATE=y +CONFIG_LZO_COMPRESS=y +CONFIG_LZO_DECOMPRESS=y +# CONFIG_XZ_DEC is not set +# CONFIG_XZ_DEC_BCJ is not set +CONFIG_DECOMPRESS_GZIP=y +CONFIG_GENERIC_ALLOCATOR=y +CONFIG_ASSOCIATIVE_ARRAY=y +CONFIG_HAS_IOMEM=y +CONFIG_HAS_IOPORT_MAP=y +CONFIG_HAS_DMA=y +CONFIG_CPU_RMAP=y +CONFIG_DQL=y +CONFIG_NLATTR=y +CONFIG_GENERIC_ATOMIC64=y +CONFIG_ARCH_HAS_ATOMIC64_DEC_IF_POSITIVE=y +CONFIG_AVERAGE=y +# CONFIG_CORDIC is not set +# CONFIG_DDR is not set +CONFIG_LIBFDT=y +CONFIG_OID_REGISTRY=y +CONFIG_FONT_SUPPORT=y +CONFIG_FONTS=y +CONFIG_FONT_8x8=y +CONFIG_FONT_8x16=y +# CONFIG_FONT_6x11 is not set +# CONFIG_FONT_7x14 is not set +# CONFIG_FONT_PEARL_8x8 is not set +# CONFIG_FONT_ACORN_8x8 is not set +# CONFIG_FONT_MINI_4x6 is not set +# CONFIG_FONT_SUN8x16 is not set +# CONFIG_FONT_SUN12x22 is not set +# CONFIG_FONT_10x18 is not set +# CONFIG_VIRTUALIZATION is not set diff --git a/examples/yocto/meta-mini/recipes-kernel/recipes-kernel/linux-vanilla/linux-vanilla_3.16.1.bb b/examples/yocto/meta-mini/recipes-kernel/recipes-kernel/linux-vanilla/linux-vanilla_3.16.1.bb new file mode 100644 index 0000000..80b35c9 --- /dev/null +++ b/examples/yocto/meta-mini/recipes-kernel/recipes-kernel/linux-vanilla/linux-vanilla_3.16.1.bb @@ -0,0 +1,29 @@ +SECTION = "kernel" +DESCRIPTION = "Linux vanilla kernel" +LICENSE = "GPLv2" +LIC_FILES_CHKSUM = "file://COPYING;md5=d7810fab7487fb0aad327b76f1be7cd7" +KERNEL_IMAGETYPE = "uImage" + +inherit kernel + +require recipes-kernel/linux/linux-dtb.inc + +COMPATIBLE_MACHINE = "imx6qsabrelite" + +KERNEL_DEVICETREE_imx6qsabrelite = "arch/arm/boot/dts/imx6q-sabrelite.dts" +KERNEL_DEVICETREE_beaglebone-black = "arch/arm/boot/dts/beaglebone-black.dts" + +S = "${WORKDIR}/linux-${PV}" + +SRC_URI = "https://www.kernel.org/pub/linux/kernel/v3.x/linux-${PV}.tar.xz \ + file://defconfig \ +" +SRC_URI[md5sum] = "e7a985a243b7941b6bc6240fcbc797fc" +SRC_URI[sha256sum] = "be37dda8ea090525661d64e5c7fc8580f313b7f9ba8592e32120f1332bc57d71" + +LINUX_VERSION_EXTENSION = "-sabrelite" +KERNEL_EXTRA_ARGS += "LOADADDR=${UBOOT_ENTRYPOINT}" + +do_configure_prepend () { + cp '${WORKDIR}/defconfig' '${S}/.config' +} -- cgit v1.2.3