diff options
Diffstat (limited to 'beagle/debian-rfs/etc/init.d/rc')
| -rwxr-xr-x | beagle/debian-rfs/etc/init.d/rc | 338 |
1 files changed, 0 insertions, 338 deletions
diff --git a/beagle/debian-rfs/etc/init.d/rc b/beagle/debian-rfs/etc/init.d/rc deleted file mode 100755 index fdb8ac7..0000000 --- a/beagle/debian-rfs/etc/init.d/rc +++ /dev/null @@ -1,338 +0,0 @@ -#! /bin/sh -# -# rc -# -# Starts/stops services on runlevel changes. -# -# Optimization: A start script is not run when the service was already -# configured to run in the previous runlevel. A stop script is not run -# when the the service was already configured not to run in the previous -# runlevel. -# -# Authors: -# Miquel van Smoorenburg <miquels@cistron.nl> -# Bruce Perens <Bruce@Pixar.com> - -PATH=/sbin:/usr/sbin:/bin:/usr/bin -export PATH - -# Un-comment the following for interactive debugging. Do not un-comment -# this for debugging a real boot process as no scripts will be executed. -# debug=echo - -# Specify method used to enable concurrent init.d scripts. -# Valid options are 'none' and 'makefile'. Obsolete options -# used earlier are 'shell' and 'startpar'. The obsolete options -# are aliases for 'makefile' since 2010-05-14. The default since -# the same date is 'makefile', as the init.d scripts in Debian now -# include dependency information and are ordered using this -# information. See insserv for information on dependency based -# boot sequencing. -CONCURRENCY=makefile - -# Make sure the name survive changing the argument list -scriptname="$0" - -umask 022 - -on_exit() { - echo "error: '$scriptname' exited outside the expected code flow." -} -trap on_exit EXIT # Enable emergency handler - -# Ignore CTRL-C only in this shell, so we can interrupt subprocesses. -trap ":" INT QUIT TSTP - -# Set onlcr to avoid staircase effect. -stty onlcr 0>&1 - -# Functions for splash progress bars -if [ -e /lib/init/splash-functions-base ] ; then - . /lib/init/splash-functions-base -else - # Quiet down script if old initscripts version without /lib/init/splash-functions-base is used. - splash_progress() { return 1; } - splash_stop() { return 1; } -fi - -# Now find out what the current and what the previous runlevel are. - -runlevel=$RUNLEVEL -# Get first argument. Set new runlevel to this argument. -[ "$1" != "" ] && runlevel=$1 -if [ "$runlevel" = "" ] -then - echo "Usage: $scriptname <runlevel>" >&2 - exit 1 -fi -previous=$PREVLEVEL -[ "$previous" = "" ] && previous=N - -export runlevel previous - -if [ -f /etc/default/rcS ] ; then - . /etc/default/rcS -fi -export VERBOSE - -if [ -f /lib/lsb/init-functions ] ; then - . /lib/lsb/init-functions -else - log_action_msg() { echo $@; } - log_failure_msg() { echo $@; } - log_warning_msg() { echo $@; } -fi - -# -# Stub to do progress bar ticks (for splash programs) on startup -# -startup_progress() { - # Avoid divide by zero if anyone moved xdm/kdm/gdm first in a runlevel. - if [ 0 -eq "$num_steps" ] ; then return; fi - - step=$(($step + $step_change)) - progress=$(($step * $progress_size / $num_steps + $first_step)) - $debug splash_progress "$progress" || true -} - -# -# Check if we are able to use make like booting. It require the -# insserv package to be enabled. Boot concurrency also requires -# startpar to be installed. -# -if [ "none" != "$CONCURRENCY" ] ; then - test -s /etc/init.d/.depend.boot || CONCURRENCY="none" - test -s /etc/init.d/.depend.start || CONCURRENCY="none" - test -s /etc/init.d/.depend.stop || CONCURRENCY="none" - if test -e /etc/init.d/.legacy-bootordering ; then - CONCURRENCY="none" - fi - startpar -v > /dev/null 2>&1 || CONCURRENCY="none" -fi - -# -# Start script or program. -# -case "$CONCURRENCY" in - makefile|startpar|shell) # startpar and shell are obsolete - CONCURRENCY=makefile - log_action_msg "Using makefile-style concurrent boot in runlevel $runlevel" - # The splash API is not handled with this CONCURRENCY mode. - # It need to be implented in startpar. Until that is done - # stop the splash screen before starting services, to avoid - # usplash and X to confuse each other during boot. - startup() { - if [ start = "$1" ] || [ boot = "$1" ] - then - $debug splash_stop || true - fi - eval "$(startpar -p 4 -t 20 -T 3 -M $1 -P $previous -R $runlevel)" - - if [ -n "$failed_service" ] - then - log_failure_msg "startpar: service(s) returned failure: $failed_service" - fi - - if [ -n "$skipped_service" ] - then - log_warning_msg "startpar: service(s) skipped: $skipped_service" - fi - - unset failed_service skipped_service - } - ;; - none|*) - startup() { - action=$1 - shift - scripts="$@" - for script in $scripts ; do - $debug "$script" $action - startup_progress - done - } - ;; -esac - -# Check if the splash screen should be stopped before the given -# script. -is_splash_stop_scripts() { - scriptname=$1 - case "$scriptname" in - # killprocs is used in runlevel 1 - gdm|xdm|kdm|ltsp-client|ltsp-client-core|reboot|halt|killprocs) - return 0 - ;; - esac - return 1 -} - -# Is there an rc directory for this new runlevel? -if [ -d /etc/rc$runlevel.d ] -then - # Find out where in the progress bar the initramfs got to. - PROGRESS_STATE=0 - if [ -f /dev/.initramfs/progress_state ]; then - . /dev/.initramfs/progress_state - fi - - # Split the remaining portion of the progress bar into thirds - progress_size=$(((100 - $PROGRESS_STATE) / 3)) - - case "$runlevel" in - 0|6) - ACTION=stop - # Count down from 0 to -100 and use the entire bar - first_step=0 - progress_size=100 - step_change=-1 - ;; - S) - ACTION=start - # Begin where the initramfs left off and use 2/3 - # of the remaining space - first_step=$PROGRESS_STATE - progress_size=$(($progress_size * 2)) - step_change=1 - ;; - *) - ACTION=start - # Begin where rcS left off and use the final 1/3 of - # the space (by leaving progress_size unchanged) - first_step=$(($progress_size * 2 + $PROGRESS_STATE)) - step_change=1 - ;; - esac - - # Count the number of scripts we need to run - # (for progress bars) - num_steps=0 - for s in /etc/rc$runlevel.d/[SK]*; do - if is_splash_stop_scripts "${s##/etc/rc$runlevel.d/S??}" ; then - break - fi - num_steps=$(($num_steps + 1)) - done - step=0 - - # First, run the KILL scripts. - if [ makefile = "$CONCURRENCY" ] - then - if [ "$ACTION" = "start" ] && [ "$previous" != N ] - then - startup stop - fi - elif [ "$previous" != N ] - then - # Run all scripts with the same level in parallel - CURLEVEL="" - for s in /etc/rc$runlevel.d/K* - do - # Extract order value from symlink - level=${s#/etc/rc$runlevel.d/K} - level=${level%%[a-zA-Z]*} - if [ "$level" = "$CURLEVEL" ] - then - continue - fi - CURLEVEL=$level - SCRIPTS="" - for i in /etc/rc$runlevel.d/K$level* - do - # Check if the script is there. - [ ! -f $i ] && continue - - # - # Find stop script in previous runlevel but - # no start script there. - # - suffix=${i#/etc/rc$runlevel.d/K[0-9][0-9]} - previous_stop=/etc/rc$previous.d/K[0-9][0-9]$suffix - previous_start=/etc/rc$previous.d/S[0-9][0-9]$suffix - # - # If there is a stop script in the previous level - # and _no_ start script there, we don't - # have to re-stop the service. - # - [ -f $previous_stop ] && [ ! -f $previous_start ] && continue - - # Stop the service. - SCRIPTS="$SCRIPTS $i" - if is_splash_stop_scripts "$suffix" ; then - $debug splash_stop || true - fi - done - startup stop $SCRIPTS - done - fi - - if [ makefile = "$CONCURRENCY" ] - then - if [ S = "$runlevel" ] - then - startup boot - else - startup $ACTION - fi - else - # Now run the START scripts for this runlevel. - # Run all scripts with the same level in parallel - CURLEVEL="" - for s in /etc/rc$runlevel.d/S* - do - # Extract order value from symlink - level=${s#/etc/rc$runlevel.d/S} - level=${level%%[a-zA-Z]*} - if [ "$level" = "$CURLEVEL" ] - then - continue - fi - CURLEVEL=$level - SCRIPTS="" - for i in /etc/rc$runlevel.d/S$level* - do - [ ! -f $i ] && continue - - suffix=${i#/etc/rc$runlevel.d/S[0-9][0-9]} - if [ "$previous" != N ] - then - # - # Find start script in previous runlevel and - # stop script in this runlevel. - # - stop=/etc/rc$runlevel.d/K[0-9][0-9]$suffix - previous_start=/etc/rc$previous.d/S[0-9][0-9]$suffix - # - # If there is a start script in the previous level - # and _no_ stop script in this level, we don't - # have to re-start the service. - # - if [ start = "$ACTION" ] ; then - [ -f $previous_start ] && [ ! -f $stop ] && continue - else - # Workaround for the special - # handling of runlevels 0 and 6. - previous_stop=/etc/rc$previous.d/K[0-9][0-9]$suffix - # - # If there is a stop script in the previous level - # and _no_ start script there, we don't - # have to re-stop the service. - # - [ -f $previous_stop ] && [ ! -f $previous_start ] && continue - fi - - fi - SCRIPTS="$SCRIPTS $i" - if is_splash_stop_scripts "$suffix" ; then - $debug splash_stop || true - fi - done - startup $ACTION $SCRIPTS - done - fi -fi - -trap - EXIT # Disable emergency handler - -exit 0 - |